1 files changed, 225 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg b/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg
new file mode 100644
index 00000000000..423849dab56
--- /dev/null
+++ b/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg
@@ -0,0 +1,225 @@
+%% BEGIN: pstricks.con (for xdvipdfmx driver)
+%%
+%% Configuration file for PSTricks
+%%
+%% Version 0.02 (2008/06/20)
+%%
+%% For use with xdvipdfmx
+%% Created by SMiyata based on standard pstricks.con from TeXLive distribution.
+%% This file may be distributed, used and modified freely.
+%
+\def\pstdriver{xdvipdfmx}
+\def\pstverb#1{\special{pst: #1}}  % Check catcode of "
+\def\pstunit{1bp}%
+\def\pstVerb#1{\immediate\special{PST: #1}}
+\def\pstverbscale{72.27 72 div dup scale }
+% DG/SR modification begin  - Apr. 28, 1997 (D. Carlisle + S. Rahtz)
+% \def\pstheader#1{\special{header=#1}}
+% We used to check for |\AtBeginDvi|, but that was broken in early release
+% so we now check for the existence of |\textsuperscript| (added 1995/05/16)
+\ifx\textsuperscript\@undefined
+   \def\pstheader#1{\special{header=#1}}
+\else
+  \ifx\Gin@PS@file@header\@undefined
+    \def\pstheader#1{\AtBeginDvi{\special{header=#1}}}
+  \else
+    \let\pstheader\Gin@PS@file@header
+  \fi
+\fi
+% DG/SR modification end
+%%
+%% In the following, CP is short for currentpoint.
+%% The neg is necessary because dvips scales the coordinates by 1 -1.
+%% \tx@NET means neg exch neg exch translate.
+\def\pstrotate{CP CP translate 3 -1 roll neg rotate \tx@NET}
+%%
+%% ****************** END xdvipdfmx *****************************
+
+%%%%%%%%%%%%%%%%%%% !! CUSTOMIZATION STUFF GOES HERE: !! %%%%%%%%%%%%%%%%%%
+%% If you want to include your own customizations to pstricks.tex, then
+%% uncomment the \pstcustomize command, and include your modifications
+%% after \pstcustomize. These will be read in after pstricks.tex.
+\def\c@lor@to@ps#1 #2\@@{\csname c@lor@ps@#1\endcsname#2 \@@}
+\def\c@lor@ps@#1 #2\@@{TeXDict begin #1 end}
+\def\c@lor@ps@rgb#1\@@{#1 setrgbcolor}
+\def\c@lor@ps@hsb#1\@@{#1 sethsbcolor}
+\def\c@lor@ps@cmyk#1\@@{#1 setcmykcolor}
+\def\c@lor@ps@gray#1\@@{#1 setgray}
+\pstcustomize
+\typeout{Using PSTricks configuration for XeTeX+xdvipdfmx}
+\def\@@scalebox{%
+\leavevmode
+\hbox{%
+\ifdim\pst@tempd\p@<\z@
+\pst@dimg=\pst@tempd\ht\pst@hbox
+\pst@dimh=\pst@tempd\dp\pst@hbox
+\dp\pst@hbox=-\pst@dimg
+\ht\pst@hbox=-\pst@dimh
+\else
+\ht\pst@hbox=\pst@tempd\ht\pst@hbox
+\dp\pst@hbox=\pst@tempd\dp\pst@hbox
+\fi
+\pst@dima=\pst@tempc\wd\pst@hbox
+\ifdim\pst@dima<\z@\kern-\pst@dima\fi
+\special{x: bscale \pst@tempc \pst@tempd}%
+\hbox to \z@{\box\pst@hbox\hss}%
+\special{x: escale}%
+\ifdim\pst@dima>\z@\kern\pst@dima\fi}}
+\let\ps@@scalebox\@@scalebox
+\def\ps@rotateleft#1{%
+\leavevmode\hbox{\hskip\ht#1\hskip\dp#1\vbox{\vskip\wd#1%
+\pst@Verb{90 \tx@RotBegin}
+\vbox to \z@{\vss\hbox to \z@{\box#1\hss}\vskip\z@}%
+\pst@Verb{\tx@RotEnd}}}}
+\def\ps@rotateright#1{%
+  \leavevmode\hbox{%
+  \hskip\ht#1\hskip\dp#1\vbox{\vskip\wd#1%
+  \pst@Verb{-90 \tx@RotBegin}
+  \vbox to \z@{\hbox to \z@{\hss\box#1}\vss}%
+  \pst@Verb{\tx@RotEnd}}}}
+\def\ps@rotatedown#1{%
+\hbox{\hskip\wd#1\vbox{\vskip\ht#1\vskip\dp#1%
+\pst@Verb{180 \tx@RotBegin}%
+\vbox to \z@{\hbox to \z@{\box#1\hss}\vss}%
+\pst@Verb{\tx@RotEnd}}}}
+\def\begin@psclip{\special{x: gsave}}
+\def\end@psclip{\special{x: grestore}}
+\def\@newcolor#1#2#3{%
+\expandafter\edef\csname #1\endcsname{\noexpand\pst@color{#2}}%
+\expandafter\edef\csname\string\color@#1\endcsname{#2}%    hv 1.14 2005-12-17
+\expandafter\edef\csname\string\color@xetex@#1\endcsname{#3}%
+\ignorespaces}
+\def\newgray#1#2{%
+  \pst@checknum{#2}\pst@tempg
+  \@newcolor{#1}{\pst@tempg setgray}{gray \pst@tempg}%
+}
+\def\newrgbcolor#1#2{%
+  \pst@expandafter\pst@getnumiii{#2} {} {} {} {}\@nil
+  \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi setrgbcolor}{rgb \pst@tempg \pst@temph \pst@tempi}%
+}
+\def\newhsbcolor#1#2{%
+  \pst@expandafter\pst@getnumiii{#2} {} {} {} {}\@nil
+  \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi sethsbcolor}{hsb \pst@tempg \pst@temph \pst@tempi}%
+}
+\def\newcmykcolor#1#2{%
+  \pst@expandafter\pst@getnumiv{#2} {} {} {} {} {}\@nil
+  \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi \pst@tempj setcmykcolor}%
+                {cmyk \pst@tempg \pst@temph \pst@tempi \pst@tempj}%
+}
+\newgray{black}{0}
+\newgray{darkgray}{.25}
+\newgray{gray}{.5}
+\newgray{lightgray}{.75}
+\newgray{white}{1}
+\newrgbcolor{red}{1 0 0}
+\newrgbcolor{green}{0 1 0}
+\newrgbcolor{blue}{0 0 1}
+\newrgbcolor{yellow}{1 1 0}
+\newrgbcolor{cyan}{0 1 1}
+\newrgbcolor{magenta}{1 0 1}
+
+\@ifundefined{LaTeXe}%
+  {\def\current@@@@color{\csname\string\color@xetex@\psfillcolor\endcsname}}{%
+  \AtBeginDocument{\@ifpackageloaded{xcolor}{\def\current@@@@color{\psfillcolor}}%
+    {\def\current@@@@color{\csname\string\color@\psfillcolor\endcsname}}}}
+\def\pst@starbox{%
+\setbox\pst@hbox\hbox{{%
+  \def\current@color{\current@@@@color}%
+\dimen@\wd\pst@hbox\advance\dimen@2\psframesep\wd\pst@hbox\dimen@%
+\dimen@\ht\pst@hbox\advance\dimen@\psframesep\ht\pst@hbox\dimen@%
+\dimen@\dp\pst@hbox\advance\dimen@\psframesep\dp\pst@hbox\dimen@%
+\@ifundefined{LaTeXe}{\special{color push \current@color}%
+    \rlap{\vrule width\wd\pst@hbox height\ht\pst@hbox depth\dp\pst@hbox}%
+    \special{color pop}}%
+  {\color@block{\wd\pst@hbox}{\ht\pst@hbox}{\dp\pst@hbox}}}%
+\rlap{\hskip\psframesep\unhbox\pst@hbox}}}
+\def\AltClipMode{}
+\def\putoverlaybox#1{%
+\hbox{\special{x: gsave}\special{x: initoverlay #1}\copy\theoverlaybox\special{x: grestore}}}
+\def\pst@overlay#1{\edef\curr@overlay{#1}\special{x: clipoverlay #1}\aftergroup\pst@endoverlay}
+\def\pst@endoverlay{\special{x: clipoverlay \curr@overlay}}
+\def\AltOverlayMode{}
+%The next line is not necessary, if pstricks.sty of [2007/02/18 v0.33] or newer is used.
+\@ifundefined{LaTeXe}{}{\AtBeginDocument{\psset{fillcolor=white}}}
+\endinput
+%
+%
+%%%%%%%%%%%%%%%% DESCRIPTION OF CONFIGURATION DEFINITIONS %%%%%%%%%%%%%%%
+
+Here are the commands that must be defined in this file:
+
+   \pstverb{}    -  The argument is included as verbatim PostScript,
+                    grouped by save and restore. The coordinate system
+		    should be square, not rotated, and with the origin
+		    at TeX's currentpoint.
+
+   \pstVerb{}    -  The argument is included as verbatim PostScript, not
+                    grouped by (g)save and (g)restore. The currentpoint
+		    should be TeX's currentpoint.
+
+   \pstunit      -  The units used by driver for graphics included with
+                    \pstverb. Probably 1bp or 1sp.
+
+   \pstverbscale - The PostScript code that scales the coordinate system
+                   from that in effect with \pstVerb to that in effect
+                   with \pstverb. Should not translate to the currentpoint.
+
+   \pstrotate    - The PostScript code that takes a number off the stack
+                   and rotates the axes properly. I.e.,
+                   \pstVerb{angle \pstrotate} is used to begin rotations.
+
+   \pstheader{}  - The argument is a header file (e.g., .pro file).
+                   If your driver does not support such a special, then
+                   the command might just remind you to include the header
+                   when printing. You can use PSTricks without a header,
+                   in which case it does not matter how you define
+                   \pstheader. See read-me.pst for details.
+                   If you cannot change the default directory where your
+                   driver looks for header files, and you cannot write to
+                   that directory, then you include the path for your
+                   PSTricks header files.
+                   E.g., \def\pstheader#1{\special{header=~/tex/#1}}.
+
+   \pstdriver    - The name of the driver.
+
+
+%%%%%%%%% !! HOW TO MAKE A TEX FORMAT WITH PSTRICKS PRELOADED !! %%%%%%%%
+
+See your local TeX documentation for instructions on creating a TeX format.
+
+Before making the format, be sure that this configuration file is correct.
+It will be read only when creating the format, and not with every job.
+
+If you are not using header files, there are no more special instructions.
+
+Special instructions when using header files:
+
+ - If you want to include supplementary PSTricks files (e.g., pst-node.tex),
+   add \input commands in the customization section above.
+
+ - If your definition of \pstheader is, e.g.
+
+     \def\pstheader#1{\special{\header=#1}}
+
+   then change it to
+
+     \def\pstheader#1{%
+       \expandafter\everyjob\expandafter{\the\everyjob
+         \special{header=#1}}}
+
+   and put your original definition in the customization section, AFTER
+   any \input commands. E.g., the customization section might look like:
+
+     \pstcustomize
+     \input pst-node.tex
+     \input pst-coil.tex
+     \def\pstheader#1{\special{header=#1}}
+
+ - Input pstricks.tex at the appropriate time when creating the format.
+   E.g., when initex stops running:
+     *\input pstricks
+     *\dump
+
+
+%%
+%% END: pstricks.con