summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/altsubsup/altsubsup.dtx386
-rw-r--r--Master/texmf-dist/source/latex/altsubsup/altsubsup.ins57
2 files changed, 443 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/altsubsup/altsubsup.dtx b/Master/texmf-dist/source/latex/altsubsup/altsubsup.dtx
new file mode 100644
index 00000000000..537c96056a9
--- /dev/null
+++ b/Master/texmf-dist/source/latex/altsubsup/altsubsup.dtx
@@ -0,0 +1,386 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2022 by Julien Labbé <Julien.Labbe@univ-grenoble-alpes.fr>
+%
+%
+% This file may be distributed and/or modified under the conditions of the LaTeX
+% Project Public License, either version 1.3 of this license or (at your option)
+% any later version. The latest version of this license is in:
+%
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.3 or later is part of all distributions of LaTeX version
+% 2005/12/01 or later.
+%
+% Note : this file was created from the version 2.1 of the dtxtut tutorial,
+% maintained by Scott Pakin.
+%
+% \fi
+%
+% \iffalse
+%<*driver>
+\ProvidesFile{altsubsup.dtx}
+%</driver>
+%<package> \NeedsTeXFormat{LaTeX2e}
+%<package> \ProvidesPackage{altsubsup}
+%<*package>
+[2022/01/23 v1.0 .dtx altsubsup file]
+%</package>
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{altsubsup}
+\usepackage[hidelinks]{hyperref}
+\usepackage{xcolor}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+% \OnlyDescription
+\begin{document}
+\DocInput{altsubsup.dtx}
+\PrintChanges
+\PrintIndex
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{109}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+%
+% \changes{v1.0}{2022/01/23}{Initial version}
+%
+% \GetFileInfo{altsubsup.dtx}
+%
+% \DoNotIndex{\newcommand,\newenvironment,\let}
+% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ }
+% \DoNotIndex{\begingroup,\endgroup,\bgroup,\egroup}
+% \DoNotIndex{\catcode,\mathcode,\lccode,\lowercase}
+% \DoNotIndex{\relax,\expandafter,\endinput}
+% \DoNotIndex{\def,\edef,\gdef,\global,\newif,\ifx,\else,\fi}
+% \DoNotIndex{\@ifnextchar,\@let@token}
+% \DoNotIndex{\sb,\sp,\text}
+%
+% \title{The \textsf{altsubsup} package\thanks{This document
+% corresponds to \textsf{altsubsup}~\fileversion, dated \filedate.}}
+% \author{Julien Labb\'e \\ \texttt{Julien.Labbe@univ-grenoble-alpes.fr}}
+%
+% \maketitle
+%
+% \begin{abstract}
+% A \LaTeX{} package to write alternative and customisable subscripts and
+% superscripts, with square brackets.
+%
+% Typical use:
+% \begin{center}
+% \begin{tabular}{ccc}
+% |x_[roman]^{italic}|& $\longrightarrow$ & $x_[roman]^{italic}$ \\[6pt]
+% |x_{italic}^[roman]|& $\longrightarrow$ & $x_{italic}^[roman]$
+% \end{tabular}
+% \end{center}
+% \end{abstract}
+%
+% \tableofcontents{}
+% \clearpage
+%
+% \section{Introduction}
+%
+% The \textsf{altsubsup} package allows to write alternate subscripts and
+% superscripts, in math mode, with square brackets :
+% \begin{center}
+% |x_[my subscript]| \quad or \quad |x^[my superscript]|.
+% \end{center}
+% These alternate superscripts and superscripts are formatted by the commands
+% set, respectively, with |\SetAltSubscriptCommand| and
+% |\SetAltSuperscriptCommand|. By default, the |\text| command, from
+% \textsf{amstext} (part of \textsf{amsmath}) is used. This gives:
+% \begin{center}
+% $x_[my subscript]$ \quad or \quad $x^[my superscript]$.
+% \end{center}
+%
+% This package redefine |_| and |^| symbols. Options allow to redefine both
+% (by default), only subscript |_| symbol, or only superscript |^| symbol.
+%
+% \section{Motivations}
+%
+% Common typographic conventions\footnotemark{} use italic (sloping) type for
+% physical quantities or mathematical variables and roman (upright) type for
+% words or fixed numbers. For example, heat capacity at constant pressure should
+% be printed $C_P$, but kinetic energy $E_[k]$ (instead of $E_k$) and relative
+% permeability $\mu_[r]$ (instead of $\mu_r$). This can be obtainted in \LaTeX{}
+% with |E_{\mathrm{k}}| and |\mu_{\mathrm{r}}|. This package allows to write them
+% simply |E_[k]| and |\mu_[r]|.
+% \footnotetext{See, for example: International Organization for
+% Standardization. (2009). \emph{Quantities and units -- Part 1: General} (ISO
+% Standard No. 80000-1:2009).
+% \href{https://www.iso.org/standard/30669.html}{https://www.iso.org/standard/30669.html}.}
+%
+% \section{Usage}
+%
+% \DescribeMacro{\SetAltSubscriptCommand\marg{cmd}}
+%
+% Set the command \meta{cmd} used to format square brackets subscripts
+% |_[...]|. By default, \meta{cmd} is the |\text| command, provided by the
+% \textsf{amstext} package (part of \textsf{amsmath} package).
+%
+% \DescribeMacro{\SetAltSuperscriptCommand\marg{cmd}}
+%
+% Set the command \meta{cmd} used to format square brackets superscripts
+% |^[...]|. By default, \meta{cmd} is the |\text| command, provided by the
+% \textsf{amstext} package (part of \textsf{amsmath} package).
+%
+% \DescribeMacro{\SetAltSubSupCommands\marg{cmd}}
+%
+% Set both square brackets subscripts and square brackets superscripts, with the
+% same command \meta{cmd}.
+%
+% \section{Options}
+%
+% To load the package, add in your preamble:
+% \begin{center}
+% \begin{minipage}{0.7\linewidth}
+% |\usepackage|\oarg{option}|{altsubsup}|
+% \end{minipage}
+% \end{center}
+% Available values for \meta{option}:
+% \begin{description}
+% \item[|subscript|] redefine only the |_| subscript symbol.
+% \item[|superscript|] redefine only the |^| superscript symbol.
+% \item[|both|] redefine both |_| and |^| symbols (default).
+% \end{description}
+%
+% \section{Example}
+%
+% The following input:
+% \begin{center}\begin{minipage}{0.7\linewidth}
+% \begin{verbatim}
+% Default:
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+%
+% New formats:
+% % \text from amstext package
+% % \color from xcolor package
+% \newcommand{\bluecolor}[1]{\text{\color{blue}#1}}
+% \newcommand{\redcolor}[1] {\text{\color{red}#1}}
+% \SetAltSubscriptCommand{\bluecolor}
+% \SetAltSuperscriptCommand{\redcolor}
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+%
+% Same command for subscripts and superscripts:
+% \SetAltSubSupCommands{\mathbf}
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+% \end{verbatim}
+% \end{minipage}\end{center}
+%
+% gives:
+% \begin{center}\begin{minipage}{0.7\linewidth}
+% Default:
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+%
+% New formats:
+% \newcommand{\bluecolor}[1]{\text{\color{blue}#1}}
+% \newcommand{\redcolor}[1] {\text{\color{red}#1}}
+% \SetAltSubscriptCommand{\bluecolor}
+% \SetAltSuperscriptCommand{\redcolor}
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+%
+% Same command for subscripts and superscripts:
+% \SetAltSubSupCommands{\mathbf}
+% \begin{displaymath}
+% x_a^b \quad
+% x_{braces sub}^{braces sup} \quad
+% x_[brackets sub]^{braces sup} \quad
+% x_{braces sub}^[brackets sup] \quad
+% x_[brackets sub]^[brackets sup]
+% \end{displaymath}
+% \end{minipage}\end{center}
+%
+% \section{Known issues}
+%
+% The use of the prime symbol |'| can raise the \emph{Double superscript}
+% error message. This is normally fixed (|x'^2| gives $x'^2$ correctly).
+% If needed, enclose the expression with |{...}|. In particular, |x'^[sup]|
+% doesn't work, and should be written: |{x'}^[sup]|.
+%
+% \section{Alternatives}
+%
+% Two other packages give similar functionalities:
+% \begin{description}
+% \item[the \textsf{subtext} package]
+% (\href{https://www.ctan.org/pkg/subtext}{https://www.ctan.org/pkg/subtext}),
+% by Palle J\o{}rgensen, formats |_[...]| subscripts with |\text| (the
+% differences, is that the \textsf{altsubsup} package works both for
+% subscripts and superscripts, allows to customise the commands, and
+% redefine symbols only in math mode);
+% \item[the \textsf{spbmark} package]
+% (\href{https://www.ctan.org/pkg/spbmark}{https://www.ctan.org/pkg/spbmark}),
+% by Qu Yi, allows a complete customisation of subscripts and superscripts.
+% \end{description}
+%
+% \StopEventually{}
+% \section{Implementation}
+%
+% \subsection*{Package declaration}
+%
+% \begin{macrocode}
+\ProvidesPackage{altsubsup}[2022/01/23, v1.0, Alternative and customisable
+subscripts and superscripts, with square brackets.]
+% \end{macrocode}
+%
+% \subsection*{Flags declaration}
+%
+% Determine the commands that will be redefined.
+%
+% \begin{macrocode}
+\newif\ifaltsbsp@subscript \altsbsp@subscripttrue
+\newif\ifaltsbsp@superscript \altsbsp@superscripttrue
+% \end{macrocode}
+%
+% \subsection*{Options declarations and processing}
+%
+% \begin{macrocode}
+\DeclareOption{subscript} {\altsbsp@subscripttrue \altsbsp@superscriptfalse}
+\DeclareOption{superscript} {\altsbsp@subscriptfalse \altsbsp@superscripttrue }
+\DeclareOption{both} {\altsbsp@subscripttrue \altsbsp@superscripttrue }
+\DeclareOption*{\PackageWarning{altsubsup}{Unknown option \CurrentOption.}}
+\ProcessOptions\relax
+% \end{macrocode}
+%
+% \subsection*{Redefine catcodes and make symbols active in mathmode}
+%
+% \begin{macrocode}
+\AtBeginDocument{%
+ \ifaltsbsp@subscript \catcode`\_=12 \mathcode`\_="8000 \fi%
+ \ifaltsbsp@superscript \catcode`\^=12 \mathcode`\^="8000 \fi%
+}
+% \end{macrocode}
+%
+% \subsection*{Redefinition of the subscript symbol}
+%
+% \begin{macrocode}
+\ifaltsbsp@subscript%
+\begingroup\lccode`\~=`\_\lowercase{\endgroup%
+ \def~}{\@ifnextchar[% dummy bracket ]
+ {\altsbsp@subwrapper}% bracket wrapper
+ {\sb}% standard form
+}%
+\fi
+% \end{macrocode}
+%
+% \subsection*{Redefinition of the superscript symbol}
+%
+% \begin{macrocode}
+\ifaltsbsp@superscript%
+\begingroup\lccode`\~=`\^\lowercase{\endgroup%
+ \def~}{\@ifnextchar[% dummy bracket ]
+ {\altsbsp@supwrapper}% bracket wrapper
+ {\sp}% standard form
+}%
+\fi
+% \end{macrocode}
+%
+% \subsection*{User macros}
+%
+% \begin{macro}{\SetAltSubscriptCommand}
+% \begin{macrocode}
+\def\SetAltSubscriptCommand#1{\let\altsbsp@altsubcmd#1}%
+\def\altsbsp@subwrapper[#1]{\sb{\altsbsp@altsubcmd{#1}}}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\SetAltSuperscriptCommand}
+% \begin{macrocode}
+\def\SetAltSuperscriptCommand#1{\let\altsbsp@altsupcmd#1}%
+\def\altsbsp@supwrapper[#1]{\sp{\altsbsp@altsupcmd{#1}}}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\SetAltSubSupCommands}
+% \begin{macrocode}
+\newcommand{\SetAltSubSupCommands}[1]{%
+ \SetAltSubscriptCommand{#1}%
+ \SetAltSuperscriptCommand{#1}%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection*{Set default commands}
+%
+% \begin{macrocode}
+\RequirePackage{amstext}%
+\SetAltSubSupCommands{\text}%
+% \end{macrocode}
+%
+% \subsection*{Fix prime symbol}
+%
+% \begin{macrocode}
+\ifaltsbsp@superscript%
+\begingroup \catcode`\^=12%
+\gdef\altsbsp@pr@m@s{% copy of \@pr@m@s code from latex.ltx
+ \ifx'\@let@token
+ \expandafter\pr@@@s
+ \else
+ \ifx^\@let@token
+ \expandafter\expandafter\expandafter\pr@@@t
+ \else
+ \egroup
+ \fi
+ \fi}
+\endgroup
+\let\pr@m@s\altsbsp@pr@m@s
+\fi
+% \end{macrocode}
+%
+% \subsection*{End of the package}
+%
+% \begin{macrocode}
+\endinput
+% \end{macrocode}
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/altsubsup/altsubsup.ins b/Master/texmf-dist/source/latex/altsubsup/altsubsup.ins
new file mode 100644
index 00000000000..df5478b20f2
--- /dev/null
+++ b/Master/texmf-dist/source/latex/altsubsup/altsubsup.ins
@@ -0,0 +1,57 @@
+%%
+%% Copyright (C) 2022 by Julien Labbé <Julien.Labbe@univ-grenoble-alpes.fr>
+%%
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.3 of this license
+%% or (at your option) any later version. The latest version of this
+%% license is in:
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.3 or later is part of all distributions of LaTeX version
+%% 2005/12/01 or later.
+%%
+%% Note : this file was created from the version 2.1 of the dtxtut tutorial,
+%% maintained by Scott Pakin.
+
+\input docstrip.tex
+\keepsilent
+
+\usedir{tex/latex/altsubsup}
+
+\preamble
+
+This is a generated file.
+
+Copyright (C) 2022 by Julien Labbé <Julien.Labbe@univ-grenoble-alpes.fr>
+
+This file may be distributed and/or modified under the conditions of
+the LaTeX Project Public License, either version 1.3 of this license
+or (at your option) any later version. The latest version of this
+license is in:
+
+ http://www.latex-project.org/lppl.txt
+
+and version 1.3 or later is part of all distributions of LaTeX version
+2005/12/01 or later.
+
+\endpreamble
+
+\generate{\file{altsubsup.sty}{\from{altsubsup.dtx}{package}}}
+
+\obeyspaces
+\Msg{*************************************************************}
+\Msg{* *}
+\Msg{* To finish the installation you have to move the following *}
+\Msg{* file into a directory searched by TeX: *}
+\Msg{* *}
+\Msg{* altsubsup.sty *}
+\Msg{* *}
+\Msg{* To produce the documentation run the file *}
+\Msg{* altsubsup.dtx through LaTeX. *}
+\Msg{* *}
+\Msg{* Happy TeXing! *}
+\Msg{* *}
+\Msg{*************************************************************}
+
+\endbatchfile
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 02:48:18 +0000