diff options
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r-- | Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx | 652 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins | 62 |
2 files changed, 714 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx new file mode 100644 index 00000000000..9022bfe6df8 --- /dev/null +++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx @@ -0,0 +1,652 @@ +% \iffalse meta-comment +% +% Copyright (C) 2011 by Sven Harder +% ----------------------------------- +% +% This file may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3 +% of this license or (at your option) any later version. +% The latest version of this license is in: +% +% http://www.latex-project.org/lppl.txt +% +% and version 1.3 or later is part of all distributions of LaTeX +% version 2005/12/01 or later. +% +% This work has the LPPL maintenance status `maintained'. +% +% The Current Maintainer of this work is Sven Harder. +% +% This work consists of the files cookingsymbols.dtx and cookingsymbols.ins +% and the derived files cookingsymbols.sty and cookingsymbols.mf. +% +% \fi +% +% \iffalse +%<package>\NeedsTeXFormat{LaTeX2e} +%<package>\ProvidesPackage{cookingsymbols} +%<package>[2011/11/02 v1.0 symbols for recipes by Sven Harder] +% +%<*driver> +\documentclass{ltxdoc} +\usepackage{cookingsymbols} +\usepackage[T1]{fontenc} +\usepackage{lmodern} +\usepackage{booktabs} +\usepackage{mflogo} +\EnableCrossrefs +\CodelineIndex +\RecordChanges +\addtolength{\oddsidemargin}{-1cm} +\begin{document} + \DocInput{cookingsymbols.dtx} +\end{document} +%</driver> +% \fi +% +% \CheckSum{47} +% +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} +% +% +% \changes{v1.0}{2011/11/02}{Initial version} +% +% \GetFileInfo{cookingsymbols.sty} +% +% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ } +% \DoNotIndex{\@ne} +% \DoNotIndex{\advance,\begingroup,\catcode,\closein} +% \DoNotIndex{\closeout,\day,\def,\edef,\else,\empty,\endgroup} +% \DoNotIndex{\begin,\end,\equal,beginchar,endchar} +% +% \title{The \textsf{cookingsymbols} package\thanks{This document +% corresponds to \textsf{cookingsymbols}~\fileversion, +% dated \filedate.}} +% \author{Sven Harder \\ \texttt{sven\_one1@gmx.de}} +% +% \maketitle +% +% \section{Introduction} +% This package includes 11 symbols. They are original created, when I was searching for symbols for typesetting recipes. However, I didn't find any symbols, so I decided to create my own ones. This is the result ;) +% +% At the end of creating these symbols, I realized that \MF\ is out of date. But at this time, I had no time to create the same symbols as vector based fonts. This is still a task for the future. +% +% \section{Symbols} +% The following symbols are created by this package and are available by these macros. \textbf{Important:} The symbols are enhanced for a better view (by \textbackslash Large). +% \begin{center} +% \begin{tabular}[h]{rl} +% \bf Macro & \bf Symbol \\ +% \toprule +% \textbackslash Oven & \Large\Oven \\ +% \textbackslash Topbottomheat & \Large\Topbottomheat \\ +% \textbackslash Topheat & \Large\Topheat\\ +% \textbackslash Bottomheat & \Large\Bottomheat\\ +% \textbackslash Fanoven & \Large\Fanoven\\ +% \textbackslash Gasstove & \Large\Gasstove\\ +% \textbackslash Dish & \Large\Dish\\ +% \textbackslash Knife & \Large\Knife\\ +% \textbackslash Fork & \Large\Fork\\ +% \textbackslash Spoon & \Large\Spoon\\ +% \textbackslash Gloves & \Large\Gloves\\ +% \end{tabular} +% \end{center} +% And now have fun with these new symbols! +% +% \StopEventually{\PrintIndex} +% +% \section{Implementation} +% +% \subsection{cookingsymbols.sty} +% The following content can be found in the derived file \textsf{cookingsymbols.sty}. It includes the macros for an easy access and the definition of the (new) font. +% \begin{macrocode} +%<*package> + +\DeclareFontFamily{U}{cookingsymbols}{} + +\DeclareFontShape{U}{cookingsymbols}{m}{n}{<-> cookingsymbols}{} +\DeclareFontShape{U}{cookingsymbols}{bx}{n}{<-> sub cookingsymbols/m/n }{} + +\newcommand{\Oven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{0}}} +\newcommand{\Topbottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{1}}} +\newcommand{\Topheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{2}}} +\newcommand{\Bottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{3}}} +\newcommand{\Fanoven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{4}}} +\newcommand{\Gasstove}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{5}}} +\newcommand{\Dish}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{6}}} +\newcommand{\Knife}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{7}}} +\newcommand{\Fork}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{8}}} +\newcommand{\Spoon}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{9}}} +\newcommand{\Gloves}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{10}}} + +%</package> +% \end{macrocode} +% +% \subsection{cookingsymbols.mf} +% The following content can be found in the derived file \textsf{cookingsymbols.mf}. In this file the symbols are defined by using \MF. +% \begin{macrocode} +%<*mf> + +mode_setup; + +font_coding_scheme = "cookingsymbols for recipes"; +font_identifier = "cookingsymbols"; + +u#:=0.68pt#; +define_pixels(u); + +font_size 10pt#; +%design_size=10pt#; +linewidth=0.4pt; + +thinpen.w := 0.5linewidth; +pen normalpen, thinpen; +normalpen := pencircle scaled 1linewidth; +thinpen := pencircle scaled thinpen.w; + +% \end{macrocode} +% +% \subsubsection{Oven} +% \begin{macrocode} +%% oven symbol +"Oven"; +beginchar(0,10u#,10u#,0); + pickup pencircle scaled 0.75 linewidth; + + % Umrandung + y1=y2; y3=y4; + x1=x4; x2=x3; + x2-x1=w; + y2-y3=h; + z4=(0u, 0u); + draw z1--z2--z3--z4--cycle; + + % Ofenklappe + r:=1u; % Radius + z5=z4+(r+0.7u, 0.7u); + x5=x8; x6=x7; + x9=x12; x10=x11; + y5=y12; y6=y11; + y7=y10; y8=y9; + + z6=z5+(-r, r); + z8=z7+(r,r); + z10=z9+(r,-r); + x11-x6=w-1.4u; % Breite + y8-y5=6.3u; % Höhe + + fill z5{left}..z6{up}..z7{up}..z8{right}..z9{right}..z10{down}..z11{down}..z12{left}..cycle; + + % Ofengriff + b:=3.2u; % Breite vom Griff + h1:=0.5u; % Höhe + z14=z8+((x9-x8)/2-b/2, -0.8u); + x14=x13; x15=x16; + x16=x13+b; + y14=y13+h1; + y15=y14; + y16=y13; + + unfill z13--z14--z15--z16--cycle; + + % Display + b:=2.8u; % Breite vom Display + h1:=1.05u; % Höhe + z17=z1+(0.8u, -1u); + x18=x19; x20=x17; + y18=y17; y19=y20; + x18-x17=b; + y18-y19=h1; + + fill z17--z18--z19--z20--cycle; + + % Knöpfe + r:=0.48u; % Radius der Knöpfe + b:=1.3u; % Abstand der Knöpfe untereinander + h1:=y19+(y18-y19)/2; + x:=x18+0.8u; + x21=x23; y24=y22; + z24=(x,h1); + z23=(x+r,h1-r); + x22=x24+2*r; + y21=y23+2*r; + %fill z21..z22..z23..z24..cycle; + + for i=0 upto 3: + fill (z21+(i*1b,0))..(z22+(i*b,0))..(z23+(i*b,0))..(z24+(i*b,0))..cycle; + endfor + + %labels(range 1 thru 24); +endchar; + +% \end{macrocode} +% +% \subsubsection{Top and bottom heat} +% \begin{macrocode} +%% top and bottomheat symbol +"Topbottomheat"; +beginchar(1,11u#,10u#,0); + pickup normalpen; + % Umrandung + ra:=1.0u; % Radius der Umrandung + y1=y4; y2=y3; + y5=y8; y6=y7; + x1=x8; x2=x7; + x3=x6; x4=x5; + + z2=z1+(ra,ra); + z4=z3+(ra,-ra); + z8=z7+(-ra,ra); + x4-x1=w; + y2-y7=h; + z8=(0,ra); + + draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle; + + % Stäbe + pickup pensquare scaled 1.15linewidth; + % Oberhitze + xa:=1.4u; % Abstand zum Rand + ya:=1.85u; + z9=(xa, (y2-y7)-ya); + x10=(x4-x1)-xa; + y10=y9; + draw z9..z10; + + % Unterhitze + x11=x9;x12=x10; + y11=ya; + y12=y11; + draw z11..z12; + + %labels(range 1 thru 12); + +endchar; + +% \end{macrocode} +% +% \subsubsection{Top heat} +% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod. +% \begin{macrocode} +%% top heat symbol +"Topheat"; +beginchar(2,11u#,10u#,0); + pickup normalpen; + % Umrandung + ra:=1.0u; % Radius der Umrandung + y1=y4; y2=y3; + y5=y8; y6=y7; + x1=x8; x2=x7; + x3=x6; x4=x5; + + z2=z1+(ra,ra); + z4=z3+(ra,-ra); + z8=z7+(-ra,ra); + x4-x1=w; + y2-y7=h; + z8=(0,ra); + + draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle; + + % Stäbe + pickup pensquare scaled 1.15linewidth; + % Oberhitze + xa:=1.4u; % Abstand zum Rand + ya:=1.85u; + z9=(xa, (y2-y7)-ya); + x10=(x4-x1)-xa; + y10=y9; + draw z9..z10; + +endchar; + +% \end{macrocode} +% +% \subsubsection{Bottom heat} +% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod. +% \begin{macrocode} +%% bottom heat symbol +"Bottomheat"; +beginchar(3,11u#,10u#,0); + pickup normalpen; + % Umrandung + ra:=1.0u; % Radius der Umrandung + y1=y4; y2=y3; + y5=y8; y6=y7; + x1=x8; x2=x7; + x3=x6; x4=x5; + + z2=z1+(ra,ra); + z4=z3+(ra,-ra); + z8=z7+(-ra,ra); + x4-x1=w; + y2-y7=h; + z8=(0,ra); + + draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle; + + % Stäbe + pickup pensquare scaled 1.15linewidth; + % Oberhitze + xa:=1.4u; % Abstand zum Rand + ya:=1.85u; + z9=(xa, (y2-y7)-ya); + x10=(x4-x1)-xa; + y10=y9; + + % Unterhitze + x11=x9;x12=x10; + y11=ya; + y12=y11; + draw z11..z12; + +endchar; + +% \end{macrocode} +% +% \subsubsection{Fanoven} +% \begin{macrocode} +%% fanoven symbol +"Fanoven"; +beginchar(4,11u#,10u#,0); + pickup normalpen; + % Umrandung + ra:=1.0u; % Radius der Umrandung + y1=y4; y2=y3; + y5=y8; y6=y7; + x1=x8; x2=x7; + x3=x6; x4=x5; + + z2=z1+(ra,ra); + z4=z3+(ra,-ra); + z8=z7+(-ra,ra); + x4-x1=w; + y2-y7=h; + z8=(0,ra); + + draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle; + + % Propeller + z15=(w/2,(h/2)-1.05u); % Rotationspunkt + a:=1.3; % Skalierungsfaktor + z9=z15+a*(0.95u,2.66u); + %z9=z15+(0.8u,3u); + y10=y9; + x10=w-x9; + z11=z9 rotatedaround(z15,120); + z12=z10 rotatedaround(z15,120); + z13=z9 rotatedaround(z15,-120); + z14=z10 rotatedaround(z15,-120); + + z16=z15 + a*(0,4u); + z17=z16 rotatedaround(z15,120); + z18=z16 rotatedaround(z15,-120); + + %draw z15..z9{1,3}..z10{-1,-3}..z15..z13..z14..z15..z11..z12..cycle; + %draw z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle; + %fill z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle; + fill z9{dir 90}..z16{dir 180}..z10{dir 270}..z13{dir -30}..z18{dir 60}..z14{dir 150}..z11{dir 210}..z17{dir 300}..z12{dir 30}..cycle; + + %labels(range 1 thru 18); +endchar; + +% \end{macrocode} +% +% \subsubsection{Gasstove} +% \begin{macrocode} +%% gasstove symbol +"Gasstove"; +beginchar(5,11u#,10u#,0); + pickup normalpen; + % Umrandung + ra:=1.0u; % Radius der Umrandung + y1=y4; y2=y3; + y5=y8; y6=y7; + x1=x8; x2=x7; + x3=x6; x4=x5; + + z2=z1+(ra,ra); + z4=z3+(ra,-ra); + z8=z7+(-ra,ra); + x4-x1=w; + y2-y7=h; + z8=(0,ra); + + draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle; + + % Flamme + z9=(w/2,1.0u); % Ursprung + z10=(w/2,9u); % Endpunkt + z11=z9+(-1.4u, 3.1u); + x12=w-x11;y12=y11; + %z12=z9+(1.5u, 3.5u); + + fill z9{dir 135}..z11{up}..z10{dir 70}--cycle; + %fill z9{dir 145}..z10{dir 65}--cycle; + + fill z9{dir 45}..z12{up}..z10{dir 110}--cycle; + + % Innere Flamme + z13=z9+(0,0.7u); % Urspung + z14=z13+(0, 3.7u); % Endpunkt + z15=z9+(-0.5u,2.1u); + z16=z9+(0.5u, 2.1u); + + unfill z13{dir 130}..z15{up}..z14{dir 65}--cycle; + + unfill z13{dir 60}..z16{up}..z14{dir 115}--cycle; + + %labels(range 1 thru 16); + +endchar; + +% \end{macrocode} +% +% \subsubsection{Dish} +% This is the definition of two circles (with different radii). +% \begin{macrocode} +%% dish symbol +"Dish"; +beginchar(6,10u#,10u#,0); + pickup normalpen; + ra:=0.5h; + x1=x3;y4=y2; + z4=(0,ra); + z3=(ra,0); + x2=x4+2*ra; + y1=y3+2*ra; + draw z1..z2..z3..z4..cycle; + + ri:=3.7u; + x5=x7;y8=y6; + z8=(ra-ri,ra); + z7=(ra,ra-ri); + y6=0.5*(y5-y7) + (ra-ri); + x5=0.5*(x6-x8) + (ra-ri); + draw z5..z6..z7..z8..cycle; + +% labels(range 1 thru 8); +endchar; + +% \end{macrocode} +% +% \subsubsection{Knife} +% \begin{macrocode} +%% knife symbol +"Knife"; +beginchar(7,1.7u#,10u#,0); + pickup normalpen; + b:=0.8u; % Breite des Stiels + z1=(w, 0u); + x2=x1-b; y2=y1; + + z5=(x2,4.8u); + z6=z5+(-0.85u, 2u); + x7=x1; y7=y1+10u; + + + fill z1--z2--z5{dir 150}..z6{up}..z7--cycle; + + %labels(range 1 thru 11); + +endchar; + +% \end{macrocode} +% +% \subsubsection{Fork} +% \begin{macrocode} +%% fork symbol +"Fork"; +beginchar(8,2u#,10u#,0); + pickup normalpen; + + b:=0.8u; % Breite des Stiels + zb:=0.2u; % Zackenbreite + za=0.4u; % Zackenabstand + z1=(w/2+b/2, 0u); + x2=x1-b; y2=y1; + x3=x2; y3=y2+6u; + x4=x1; y4=y3; + + fill z1--z2--z3--z4--cycle; + + x5=x3-(4*zb+3*za)/2 +b/2; + y5=y3+1.9u; + x6=x5; y6=y5+2.1u; + x7=x6+zb; y7=y6; + x8=x7; y8=y5; + + x9=x8+za; y9=y8; + x10=x9; y10=y6; + x11=x10+zb; y11=y10; + x12=x11; y12=y9; + + x13=x12+za; y13=y12; + x14=x13; y14=y6; + x15=x14+zb; y15=y14; + x16=x15; y16=y5; + + x17=x16+za; y17=y16; + x18=x17; y18=y6; + x19=x18+zb; y19=y18; + x20=x19; y20=y5; + + fill z3{dir 130}..z5{up}--z6--z7--z8--z9--z10--z11--z12--z13--z14--z15--z16--z17--z18--z19--z20{down}..z4{dir 230}..cycle; + + %labels(range 1 thru 20); + +endchar; + +% \end{macrocode} +% +% \subsubsection{Spoon} +% \begin{macrocode} +%% spoon symbol +"Spoon"; +beginchar(9, 3.4u#, 10u#,0); + pickup normalpen; + + b:=0.8u; % Breite des Stiels + % Stiel + z1=(w/2+b/2, 0u); + x2=x1-b; y2=y1; + x3=x2; y3=y2+5.74u; + x4=x1; y4=y3; + + fill z1--z2--z3--z4--cycle; + + % Oberteil + x5=x3-1.0u; + x6=x4+(x3-x5); + y5=y6=y3+(y7-y3)/2 - 0.2u; % halbe Breite + z7=(x3+(x4-x3)/2, y3+4u); % y: maximale Ausdehnung + + draw z7{dir -170}..z5{down}..(x3+(x4-x3)/2, y3){dir -10}; + draw (x3+(x4-x3)/2, y3){dir 10}..z6{up}..z7{dir 170};%..(z7-(b/2, 0)); + %draw z3{dir 150}..z5{up}..z7{right}; umdrehen! + %draw z7{right}..z6{down}..z4{dir -150}..z3; + %draw z3{dir 170}..z5{dir 75}..z7{right}..z6{dir -75}..z4{dir -170}..z3; + + %labels(range 1 thru 12); +endchar; + +% \end{macrocode} +% +% \subsubsection{Gloves} +% \begin{macrocode} +%% gloves symbol +"Gloves"; +beginchar(10,10.4u#,10u#,0); + pickup thinpen; + + a:=1.05; % Skalierungsfaktor + breite:=a*4.3u; % Breite unten am Handschuh + hoehe:=a*1.8u; + + z5=a*(3.3u-0.4u, 3u); % Rotationspunkt 1. Handschuh + z9=z5 + a*(-0.55u, 0.1u); % Rotationspunkt 2. Handschuh + alpha:=-37; % Rotationswinkel -37 + beta:=-26; % Verschiebung des zweiten Handschuhs bzgl. des oberen + + % Oberer Handschuh + z4=(0.8u, 1u); + x1=x4; x2=x3; + y1=y2; y3=y4; + x2-x1=breite; + y1-y4=hoehe; + + fill z1--z2--z3--z4--cycle rotatedaround(z5, alpha); + + % Daumen + z7=z1 + a*(0.5thinpen.w+0.2u, 3.5u); + z6=z7 + a*(-1.2u, 1.3u); + + draw ((z1+(0.5thinpen.w,0)){up}..z6{dir 75}..z7{dir -80}) rotatedaround(z5, alpha); + + % Oberer Rand/Begrenzung + z8=z1 + ((x2-x1)/2 + a*0.2u, a*8.2u); + + draw (z7{dir 90}..z8{right}..(z2+(-0.5thinpen.w,0)){dir -90}) rotatedaround(z5, alpha); + + + + % Zweiter Handschuh + fill z1--(z1-(-a*0.8u, (y1-y4)/2+a*0.6u))--z4--cycle rotatedaround(z9, alpha+beta); + + fill z4--z2--z3--cycle rotatedaround(z9, alpha+beta); + + %z10=z1 + a*(1u, 7.55u); % Schnittpunkt der beiden Handschuhe + z10=z1 + a*(1u, 7.75u); + + draw (z10..z8{right}..z2{dir -90}) rotatedaround(z9, alpha+beta); + + + + % 'Weißer' Trennstrich + z11=z3 - (0, 0.5thinpen.w); + x12=x1; y12=y11; + unfill (z4--z3--z11--z12--cycle) rotatedaround(z5, alpha); + + + %labels(range 1 thru 20); +endchar; + +end +%</mf> +% \end{macrocode} +% +% \Finale +\endinput
\ No newline at end of file diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins new file mode 100644 index 00000000000..0dc0cbafb47 --- /dev/null +++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins @@ -0,0 +1,62 @@ + %% --------------------- cookingsymbols.ins ------------------------- + + +\def\filedate{2011/11/02} +\def\batchfile{cookingsymbols.ins} + +\input docstrip +\ifx\generate\undefined + \obeyspaces + \Msg{************************************************} + \Msg{* *} + \Msg{* This installation requires docstrip *} + \Msg{* version 2.4 or later. *} + \Msg{* *} + \Msg{* An older version of docstrip has been input. *} + \Msg{* *} + \Msg{************************************************} + \errhelp{Move or rename old docstrip.tex and get a newer one.} + \errmessage{Old docstrip in input path} + \batchmode + \csname @@end\endcsname\end +\fi + +\keepsilent +\askforoverwritefalse + +\preamble + +This is a generated file. +Copyright (C) 2011 by Sven Harder + +This file may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either +version 1.3 of this license or (at your option) any later +version. The latest version of this license is in: + +http://www.latex-project.org/lppl.txt + +and version 1.3 or later is part of all distributions of +LaTeX version 2005/12/01 or later. +\endpreamble + +\declarepostamble\mfpostamble +\endpostamble + +\generate +{% + \file{cookingsymbols.sty}{\from{cookingsymbols.dtx}{package}} + \usepostamble\mfpostamble + \file{cookingsymbols.mf}{\from{cookingsymbols.dtx}{mf}} +} + \obeyspaces + \Msg{**********************************************************************} + \Msg{* *} + \Msg{* To finish the installation you have to copy the file *} + \Msg{* *} + \Msg{* *.sty and *.mf into a directory in the search path by TeX *} + \Msg{* *} + \Msg{**********************************************************************} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\endinput |