summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/tools/varioref.dtx
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/tools/varioref.dtx')
-rw-r--r--Master/texmf-dist/source/latex/tools/varioref.dtx1903
1 files changed, 1903 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/tools/varioref.dtx b/Master/texmf-dist/source/latex/tools/varioref.dtx
new file mode 100644
index 00000000000..1a30d6742d3
--- /dev/null
+++ b/Master/texmf-dist/source/latex/tools/varioref.dtx
@@ -0,0 +1,1903 @@
+% \iffalse meta-comment
+%
+% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003
+% The LaTeX3 Project and any individual authors listed elsewhere
+% in this file.
+%
+% This file is part of the Standard LaTeX `Tools Bundle'.
+% -------------------------------------------------------
+%
+% It may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2003/12/01 or later.
+%
+% The list of all files belonging to the LaTeX `Tools Bundle' is
+% given in the file `manifest.txt'.
+%
+% \fi
+% \iffalse
+%% Package varioref to use with LaTeX2e
+%% Copyright (C) 1992-2004 Frank Mittelbach, all rights reserved.
+%%
+%% For additions or updates to the language options please contact
+%% the author at
+%%
+%% frank.mittelbach@latex-project.org
+%%
+%% In case of bugs, please use "latexbug.tex" (category tools) to report them.
+%%
+%
+%<package>\NeedsTeXFormat{LaTeX2e}[1995/05/16]
+%<package>\ProvidesPackage{varioref}
+%<package> [2004/02/27 v1.4i package for extended references (FMi)]
+% \fi
+%
+% \CheckSum{1683}
+%% \CharacterTable
+%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%% Digits \0\1\2\3\4\5\6\7\8\9
+%% Exclamation \! Double quote \" Hash (number) \#
+%% Dollar \$ Percent \% Ampersand \&
+%% Acute accent \' Left paren \( Right paren \)
+%% Asterisk \* Plus \+ Comma \,
+%% Minus \- Point \. Solidus \/
+%% Colon \: Semicolon \; Less than \<
+%% Equals \= Greater than \> Question mark \?
+%% Commercial at \@ Left bracket \[ Backslash \\
+%% Right bracket \] Circumflex \^ Underscore \_
+%% Grave accent \` Left brace \{ Vertical bar \|
+%% Right brace \} Tilde \~}
+%%
+%
+%
+% \changes{v1.0a}{1993/12/06}{Upgrade to LaTeX2e}
+% \changes{v1.0g}{1994/05/27}{Use \cmd\DeclareRobustCommand}
+%
+%
+% \title{The \texttt{varioref} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{Frank Mittelbach}
+% \date{\filedate}
+%
+% \maketitle
+%
+%
+% \begin{abstract}
+% This package defines the commands |\vref|, |\vpageref|,
+% |\vrefrange|, and |\vpagerefrange| for
+% \LaTeXe. |\vref| is similar to |\ref| but adds an additional
+% page reference, like `on the facing page' or `on page 27' whenever
+% the corresponding |\label| is not on the same page. The command
+% |\vpageref| is a variation to |\pageref| with a similar
+% functionality. The |\v...range| commands take two labels as arguments
+% and produce strings which depend on whether or not these labels
+% fall onto a single page or on different pages.
+% Generated strings are customizable so that these
+% commands are usable with various languages.
+% \end{abstract}
+%
+% \section{Introduction}
+%
+% In many cases it is helpful when refering to a figure or table to
+% put both a |\ref| and a |\pageref| command into the document
+% especially when there are one or more pages between the reference
+% and the object. Therefore some people use a command like
+% \begin{verbatim}
+% \newcommand{\fullref}[1]{\ref{#1} on page~\pageref{#1}}
+%\end{verbatim}
+% which reduces the number of key strokes, necessary to make such a
+% complete reference. But since one never knows where the referenced
+% object finally falls, using such a device may result in a page
+% reference to the current page which is disturbing and therefore
+% should be avoided.
+%
+%
+%
+% \section{The user interface}
+%
+%\DescribeMacro\vref The implementation of |\vref| below produces only
+% a |\ref| when reference and |\label| are on the same page. It will
+% additionally produce one of the strings `on the facing page', `on
+% the preceding page', or `on the following page', if label and
+% reference differ by one and it will produce both |\ref| and
+% |\pageref| when the difference is larger. The word `facing' is used
+% when label and reference both fall onto a double spread. However,
+% if a special page numbering scheme is used instead of the usual
+% arabic numbering (e.g., |\pagenumbering{roman}|) then there will be
+% no distinction between one or many pages off.
+%
+%\DescribeMacro\vpageref Sometimes one wants to refer only to page
+% number and again such a reference should normally be suppressed if
+% we are refering to the current page. For this purpose the package
+% defines the |\vpageref| command. It will produce the same strings as
+% |\vref| except that it doesn't start with the |\ref| and except that
+% it will produce the string that is saved in |\reftextcurrent| if
+% label and reference fall onto the same page. By defining
+% |\reftextcurrent| to produce ``on this page'' or something similar,
+% we can avoid that
+% \begin{verbatim}
+% ... see the example \vpageref{ex:foo} which shows ...
+%\end{verbatim}
+% comes out as ``\ldots~see the example which shows~\ldots'', which
+% could be misleading.
+%
+% You can put a space in front of |\vpageref| it will be ignored if
+% the command doesn't produce any text at all.
+%
+% But in fact |\vpageref| allows even more control. If has two
+% optional arguments. With the first one, one can specify the text
+% that should be used if label and reference fall on the same page.
+% This is very helpful if both are near to each other, so that they
+% may or may not be separated by a page break. In such a case we
+% usually know (!) whether the reference is before or after the label
+% so that we can say something like
+% \begin{verbatim}
+% ... see the example \vpageref[above]{ex:foo} which shows ...
+%\end{verbatim}
+% which will then come out as ``\ldots~see the example above which
+% shows~\ldots'' if we are still on the same page, but as ``\ldots~see
+% the example on the page before which shows~\ldots'' (or something
+% similar depending on the settings of the |\reftext..before|
+% commands) when there was a page break in the meantime. One warning
+% however, if you use |\vpageref| with the optional argument to refer
+% to a figure or table, keep in mind that depending on the float
+% placement parameters the float may show up on top of the current
+% page and therefore before the reference even if it came after it in
+% the source file.
+%
+% But maybe you prefer to say ``\ldots~see the above example'' if
+% example and reference fall onto the same page, i.e., reverse the
+% word order. In fact, in some languages the word order automatically
+% changes in that case. To allow for this variation the second
+% optional argument can be used. It specifies the text preceding the
+% generated reference if object and reference do not fall onto the
+% same page. Thus one would write
+% \begin{verbatim}
+% ... see the \vpageref[above example][example]{ex:foo}
+% which shows ...
+%\end{verbatim}
+% to achieve the desired effect.
+%
+%
+% \subsection{Additions in 1998}
+%
+% \DescribeMacro\vrefrange This command is similar to |\vref| but it
+% takes two mandatory arguments denoting a range to refer to (e.g., a
+% sequences of figures or a sequence of equations, etc.). So if
+% |fig:a| is your first figure in the sequence and |fig:c| your last
+% you can write
+%\begin{verbatim}
+% ... see figures \vrefrange{fig:a}{fig:c} ...
+%\end{verbatim}
+% which would then be formatted as
+% \begin{quote}
+% \ldots\ see figures 3.4 to 3.6 on pages 23--24 \ldots
+% \end{quote}
+% or, if they happen to all fall onto the next page, as
+% \begin{quote}
+% \ldots\ see figures 3.4 to 3.6 on the following page \ldots
+% \end{quote}
+% i.e., the command is deciding what to say depending on where the two
+% labels are placed in relation to each other; it is essentially
+% implemented using |\vpagerefrange| described below.
+% The optional argument the command may take is the text to use in case
+% both labels are placed on the current page.
+%
+%
+% \DescribeMacro\vpagerefrange This command is similar to |\vpageref|
+% but takes two mandatory arguments which are two labels denoting a
+% range. If both labels fall onto the same page, the command acts
+% exactly like |\vpageref| (with a single label), otherwise it produces
+% something like ``on pages~15--18'' (see customization possibilities
+% below). The optional argument it may take is the text to use in case
+% both labels are placed on the current page.
+
+% \DescribeMacro\vrefpagenum This macro is provided to allow the user
+% to write their own small commands which implement functions similar
+% to those provided by the two previous commands. It takes two
+% arguments: the second is a label (i.e., as used in |\label| or
+% |\ref|) and the first is an arbitrary command name (make sure you
+% use our own) that receives the page number related to this label.
+% So if you have two (or more) labels you could retrieve their page
+% numbers, compare them and then decide what to print. For example,
+% the following not very serious definition (also using the
+% \texttt{ifthen} package)
+%\begin{verbatim}
+% \newcommand\amusingversion[2]{%
+% \vrefpagenum\firstnum{#1}%
+% \vrefpagenum\secondnum{#2}%
+% the definition%
+% \ifthenelse{\equal\firstnum\secondnum}%
+% {s of \ref{#1} and \ref{#2} \vpageref{#1}}%
+% { of \ref{#1} \vpageref{#1} and of \ref{#2} \vpageref{#2}}%
+% }
+%
+% ...\amusingversion{foo}{bar}
+%\end{verbatim}
+% will print something like
+% \begin{quote}
+% \ldots the definitions of 3 and 4 on the previous page
+% \end{quote}
+% in the case both labels are on the same page but something like
+% \begin{quote}
+% \ldots the definition of 3 on the next page and of 4 on page~13
+% \end{quote}
+% in case the are on different pages.
+%
+% \subsection{Additions in 2001}
+%
+% The user commands |\vref|, |\vpageref|, and |\vpagerefrange| all
+% work by first removing any space on their left and then inserting
+% some space of their own (|\vref|, for example, a nonbreakable
+% space). That seemed like a good idea back then, but it has the
+% disadvantage that you can't use these macros in situations where you
+% definitely do not want any space before the generated text. E.g., in
+% situations like |(\vref{foo} ...)| you end up with a space after the
+% open parenthesis.
+%
+% \DescribeMacro{\vref*}
+% \DescribeMacro{\vpageref*}
+% \DescribeMacro{\vpagerefrange*}
+% Since it is to late to change the default behaviour I've added star
+% versions of the macros which do not add any space before the
+% generated text (they do nevertheless remove space at the left).
+%
+%
+% \subsection{Additions in 2002}
+%
+% \DescribeMacro\labelformat
+% A reference via |\ref| produces by default the data associated with
+% the corresponding |\label| command (typically a number); any
+% additional formatting has to be provided by the user. If, for
+% example, references to equations are always to be typeset as
+% ``equation (\textit{number})'', one has to code
+% ``\verb=equation (\ref{=\textit{key}\verb=})=''. With |\labelformat|
+% the \texttt{varioref} package offers a possibility to generate such
+% frills automatically. The command takes two arguments: the first is
+% the name of a counter and the second is its representation when
+% referenced. This means that for a successful usage, one has to know
+% the counter name being used for generating the label, though in
+% practice this should not pose a problem. The current counter number
+% is picked up as an argument.
+% Here are two examples:
+%\begin{verbatim}
+% \labelformat{section}{section~#1}
+% \labelformat{equation}{equation~(#1)}}
+%\end{verbatim}
+%
+%
+% \DescribeMacro\Vref
+% \DescribeMacro\Ref
+% A side effect of using |\labelformat| is that, depending on the
+% defined formatting, it becomes impossible to use |\ref| at the
+% beginning of a sentence (if its replacement text starts with a
+% lowercase letter). To overcome this problem \texttt{varioref}
+% introduces the commands |\Ref| and |\Vref| that behave like
+% |\ref| and |\{vref| except that they uppercase the first token
+% of the generated string.
+%
+% To make |\Ref| or |\Vref| work properly the very first token in
+% the second argument of |\labelformat| has to be a simple \textsc{ascii}
+% letter, otherwise the capitalization will fail or worse, you will end
+% up with some error messages. If you actually need something more
+% complicated in this place (e.g., an accented letter)
+% you have to explicitly surround it with braces, to
+% identify the part that needs to be capitalized. For example, for
+% figure references in the Hungarian language you might want to write
+% |\labelformat{figure}{{\'a}bra~\thefigure}|.
+%
+% \DescribeMacro\vpagerefnum
+% If you like to have |\vref| suppress the page number on pages where
+% label and reference fall onto the same page, but prefer reference to
+% page numbers otherwise then |\vpagerefnum| can be used. This macro
+% hold the current page ``number" when |\vpageref| and friends are
+% executed. Thus, by defining, for example
+%\begin{verbatim}
+%\renewcommand\reftextfaceafter {on page~\thevpagerefnum}
+%\renewcommand\reftextfacebefore{on page~\thevpagerefnum}
+%\renewcommand\reftextafter {on page~\thevpagerefnum}
+%\renewcommand\reftextbefore {on page~\thevpagerefnum}
+%\end{verbatim}
+% textual references can be suppressed.
+%
+%
+% \section{Customization}
+%
+% The package supports all options defined by the babel package to
+% translate the fixed strings into other languages than English.
+% (Some languages need updating, however.)
+% It also supports languages currently not in babel;
+% check the section on options later on.
+% You can also modify some or all of the strings by redefining the
+% following commands.
+%\DescribeMacro\reftextbefore
+%\DescribeMacro\reftextfacebefore
+%\DescribeMacro\reftextafter
+%\DescribeMacro\reftextfaceafter Backward references use
+% |\reftextbefore| if the label is on the preceding page but invisible
+% and |\reftextfacebefore| if it is one the facing page (i.e., if the
+% current page number is odd). Similarily |\reftextafter| is used
+% when the label comes on the next page but one has to turn the page
+% and |\reftextfaceafter| if it is on the following but facing page.
+%
+% In fact, |\reftextface...| is used only if the user or the document
+% class specified two-sided printing.
+%
+%\DescribeMacro\reftextfaraway Finally we have |\reftextfaraway| which
+% is used whenever label and reference differ by more than one or when
+% they aren't numeric. This macro is a bit different because it takes
+% one argument, the symbolic reference string so that one cane make
+% use of |\pageref| in its replacement text.
+%
+%
+%\DescribeMacro\vreftextvario To allow a bit random variation in the
+% generated strings one can use the command |\reftextvario| inside the
+% string macros. It takes two arguments and selects one or the other
+% for printing depending on the number of already seens |\vref| or
+% |\vpageref| commands. As an example see the definitions of
+% |\reftextbefore| etc.\ \vpageref[below]{reftextbefore}.
+%
+%
+% \subsection{Additions in 1998}
+%
+% The commands |\vrefrange| and |\vpagerefrange| produce their text
+% using two macros described below. By redefining them one can modify
+% the results to accommodate special requirements.
+%
+%
+% They both take two mandatory arguments denoting the first and the
+% last label of the range.
+%
+%
+% \DescribeMacro\reftextpagerange This macro produces text that
+% describes the page range of the two labels, e.g., the default
+% for English is ``|on pages~\pageref{#1}--\pageref{#2}}|''.
+%
+%
+% \DescribeMacro\reftextlabelrange This macro produces text that
+% describes the range of figures, tables, or whatever the labels refer
+% to, the default for English is ``|\ref{#1} to~\ref{#2}|''.
+%
+%
+% \section{Options}
+%
+% As mentioned above the package supports all standard options offered
+% by the Babel system to customize the strings produced. In addition it
+% offers the option \texttt{draft} to turn error messages into warnings
+% during development. The defaul \texttt{final} produces error message
+% when a generated string falls onto a page boundary (see next section).
+%
+%
+% \section{A few warnings}
+%
+% Defining commands like the ones described above poses some
+% interesting problems. Suppose, for example, that a generated text
+% like `on the next page' gets broken across pages. If this happens it
+% is very difficult to find an acceptable solution and in fact can
+% even result in a document that will always change from one state to
+% another (i.e., inserting one string, finding that this is wrong,
+% inserting another string on the next run which makes the first
+% string correct again, inserting \ldots). The current implementation
+% of \texttt{varioref} therefore issues an error message whenever the
+% generated text is broken across page boundaries, e.g.,
+% \begin{quote}
+% table 5 on the current \meta{page break} page
+% \end{quote}
+% would would result in an error, which needs to be resolved by the
+% user by replacing the |\vref| command with an ordinary |\ref| just
+% before the final run. This is not
+% completely satisfactory but in such case no solution really is.
+% \DescribeMacro\vrefwarning
+% During document preparation, while one is still changing the text,
+% such error messages can be turned into warnings by placing a
+% |\vrefwarning| command in the preamble. This is equivalent to
+% specifying ``draft'' as an option to the package.
+% \DescribeMacro\vrefshowerrors
+% |\vrefshowerrors| ensures that varioref stops when detecting a
+% possible loop. This is the default and equivalent to specifying
+% ``final'' as an option.
+%
+% At the end final a warning: every use of |\vref| will internally
+% generate two macro names to keep track of the string positions
+% within the document. As a result you may run out of name space or
+% main memory if you make heavy use of this macro on a small \TeX{}
+% installation.
+%\DescribeMacro\fullref For this reason the primitive command
+% |\fullref| is also provided. This command can be used whenever you
+% know for sure that label and reference can't fall onto nearby pages.
+%
+% \StopEventually{\PrintIndex\PrintChanges}
+%
+%
+% \section{The documentation driver file}
+%
+% The next bit of code contains the documentation driver file for
+% \TeX{}, i.e., the file that will produce the documentation you are
+% currently reading. It will be extracted from this file by the
+% \texttt{docstrip} program.
+% \begin{macrocode}
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{varioref}
+\GetFileInfo{varioref.sty}
+\setlength\hfuzz{1pt} % ignore slight overfulls
+\EnableCrossrefs
+%\DisableCrossrefs % Say \DisableCrossrefs if index is ready
+
+\RecordChanges % Gather update information
+%\OnlyDescription % comment out for implementation details
+\begin{document}
+ \DocInput{varioref.dtx}
+\end{document}
+%</driver>
+% \end{macrocode}
+%
+%
+% \section{The implementation}
+%
+% The main implementation idea is to generate an internal label
+% command for every |\vpageref| and compare the page reference of this
+% label with the page reference of the user-requested label. Since
+% this means one additional macro name for each use of |\vpageref| or
+% |vref| (which is implemented in terms of |\vpageref|) the memory
+% requirements of this package may be high in terms of main and macro
+% name memory. Since the information held in the internal labels is
+% used only once one could envision a different scheme if suitable
+% primitives for this kind of ``one place information'' would be
+% provided by \LaTeX. This type of data structure is planned for
+% \LaTeX3 but for the moment we have to live with the memory
+% restrictions.
+%
+% We start by checking if this file was already loaded. If not we
+% identify the current version. This is actually done at the top
+% of the file, so we comment it out here
+% \changes{v0.1h}{1993/08/15}{Small documentation changes}
+% \begin{macrocode}
+%<*package>
+%\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+%\ProvidesPackage{varioref}[\filedate\space\fileversion\space
+% LaTeX2e package for extended references (FMi)]
+% \end{macrocode}
+%
+%
+% \begin{macro}{\vref@addto}
+% \changes{v1.0b}{1994/01/31}{Avoid using babel `addto}
+% \changes{v1.0b}{1994/01/31}{The babel commands are starting
+% with extras}
+% To support the use of babel we want to add the additional strings
+% to the |\extras|\meta{language} commands. Since |\addto| in the
+% current implementation of babel has a bug that does not allow to
+% use arguments containing hashmarks we do this by hand.
+% \begin{macrocode}
+\def\vref@addto#1#2{%
+ #2%
+ \@temptokena{#2}%
+ \ifx#1\undefined
+ \edef#1{\the\@temptokena}%
+ \else
+ \toks@\expandafter{#1}%
+ \edef#1{\the\toks@\the\@temptokena}%
+ \fi
+ \@temptokena{}\toks@\@temptokena
+}
+\@onlypreamble\vref@addto
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Options}
+%
+% \begin{macro}{\vref@excuse}
+% Excuse that we don't know the strings for a certain language.
+% \changes{v1.0q}{1995/04/06}{Use `PackageWarning}
+% \begin{macrocode}
+\def\vref@excuse#1{%
+ \PackageWarningNoLine{varioref}{Sorry, language `#1'
+ not supported%
+ \MessageBreak
+ in this version.
+ English strings used by default.
+ \MessageBreak
+ Please modify \protect\reftext... commands manually.%
+ \MessageBreak\MessageBreak
+ If you can suggest translations for
+ this language,%
+ \MessageBreak
+ please mail them
+ to the author of this package}}
+\@onlypreamble\vref@excuse
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\vref@stringwarning}
+% And we sometimes just don't know some strings~\ldots
+% \changes{v1.2a}{1998/08/01}{Macro added}
+% \begin{macrocode}
+\def\vref@stringwarning#1{%
+ \PackageWarningNoLine{varioref}{Sorry, there is no proper
+ translation for the string\MessageBreak
+ produced by \protect#1\on@line.\MessageBreak
+ English string used instead.\MessageBreak
+ \MessageBreak
+ If you can suggest translations for
+ the current\MessageBreak
+ language, please mail them
+ to the author of this\MessageBreak package}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\reftextfaceafter}
+% \begin{macro}{\reftextfacebefore}
+% \begin{macro}{\reftextafter}
+% \begin{macro}{\reftextbefore}
+% \begin{macro}{\reftextcurrent}
+% \label{reftextbefore} The options do set the the macros that
+% generate the textual strings. Note, that they do not start with a
+% space, the space is already added in the main macro below.
+% \changes{v1.2a}{1998/08/22}{Added american defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \changes{v1.4d}{2002/11/11}{Changed default for \cs{reftextbefore}}
+%
+% Afrikaans option contributed by Danie Els
+% (\texttt{dnjels@sun.ac.za}).
+% \changes{v1.4g}{2003/03/29}{Added afrikaans option}
+% \begin{macrocode}
+\DeclareOption{afrikaans}
+ {\vref@addto\extrasafrikaans{%
+ \def\reftextfaceafter {op die \reftextvario{regterbladsy}%
+ {bladsy langsaan}}%
+ \def\reftextfacebefore{op die \reftextvario{linkerbladsy}%
+ {bladsy langsaan}}%
+ \def\reftextafter {op die \reftextvario{volgende bladsy}%
+ {bladsy hierna}}%
+ \def\reftextbefore {op die \reftextvario{vorige bladsy}%
+ {bladsy hiervoor}}%
+ \def\reftextcurrent {op \reftextvario{hierdie}%
+ {die huidige} bladsy}%
+ \def\reftextfaraway#1{op bladsy~\pageref{#1}}%
+ \def\reftextpagerange#1#2{op bladsye~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} tot~\ref{#2}}%
+ }}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\DeclareOption{american}
+ {\vref@addto\extrasamerican{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% \changes{v1.2a}{1998/11/27}{Added austrian defaults (identical to german)}
+% The austrian defaults are the same as the german ones.
+% \begin{macrocode}
+\DeclareOption{austrian}
+ {\vref@addto\extrasaustrian{%
+ \def\reftextfaceafter {auf der n\"achsten Seite}%
+ \def\reftextfacebefore{auf der vorherigen Seite}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {auf dieser Seite}%
+ \def\reftextfaraway#1{auf Seite~\pageref{#1}}%
+ \def\reftextpagerange#1#2{auf Seiten~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} bis~\ref{#2}}%
+ }}
+% \end{macrocode}
+% \changes{v1.2d}{2000/01/11}{Added naustrian defaults (identical to german)}
+% The naustrian defaults are the same but needed for ``Neue Rechtschreibung''.
+% \begin{macrocode}
+\DeclareOption{naustrian}
+ {\vref@addto\extrasnaustrian{%
+ \def\reftextfaceafter {auf der n\"achsten Seite}%
+ \def\reftextfacebefore{auf der vorherigen Seite}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {auf dieser Seite}%
+ \def\reftextfaraway#1{auf Seite~\pageref{#1}}%
+ \def\reftextpagerange#1#2{auf Seiten~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} bis~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Text for brazil defaults was contributed by
+% Alcino Dall Igna Junior\\
+% (|adij@di.ufpe.br|).
+% \changes{v1.0g}{1994/05/18}{Brazil defaults added.}
+% \begin{macrocode}
+\DeclareOption{brazil}
+ {\vref@addto\extrabrazil{%
+ \def\reftextfaceafter {na \reftextvario{p\'agina oposta}{pr\'oxima
+ p\'agina}}%
+ \def\reftextfacebefore{na p\'agina \reftextvario{oposta}{anterior}}%
+ \def\reftextafter {na \reftextvario{p\'agina seguinte}{pr\'oxima
+ p\'agina}}%
+ \def\reftextbefore{na p\'agina \reftextvario{anterior}{precedente}}%
+ \def\reftextcurrent {\reftextvario{nesta p\'agina}{na p\'agina
+ corrente}}%
+ \def\reftextfaraway#1{na p\'agina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Text for Breton defaults was contributed by
+% Christian ROLLAND\\
+% (|Christian.Rolland@univ-brest.fr|).
+% \changes{v1.0o}{1994/09/27}{Added defaults for breton}
+% \begin{macrocode}
+\DeclareOption{breton}
+ {\vref@excuse{breton}%
+ \vref@addto\extrasbreton{%
+ \def\reftextfaceafter {war ar bajenn \reftextvario{a-dal}{da heul}}%
+ \def\reftextfacebefore{war ar bajenn \reftextvario{a-dal}{a-raok}}%
+ \def\reftextafter {war ar bajenn da heul}%
+ \def\reftextbefore {war ar bajenn a-raok}%
+ \def\reftextcurrent {war ar \reftextvario{bajenn-ma\~n}%
+ {bajenn war-wel}}%
+ \def\reftextfaraway#1{war ar bajenn~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Text for catalan defaults was contributed by Robert Fuster\\
+% (\verb=rfuster@mat.upv.es=).
+% \changes{v1.1c}{1997/06/12}{Added defaults for catalan}
+% \changes{v1.2g}{2000/08/22}{Updated defaults for catalan}
+% \begin{macrocode}
+\DeclareOption{catalan}
+ {\vref@addto\extrascatalan{%
+ \def\reftextfaceafter {a la p\`agina seg\"uent}%
+ \def\reftextfacebefore{a la p\`agina anterior}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {en aquesta p\`agina}%
+ \def\reftextfaraway#1{a la p\`agina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{a les
+ p\`agines~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} a~\ref{#2}}%
+ }}
+\DeclareOption{croatian}
+ {\vref@excuse{croatian}%
+ \vref@addto\extrascroatian{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Defaults for the Czech option provided by Milan Vancura
+% \verb=<milan@suse.cz>=.
+% \changes{v1.2e}{2000/04/04}{Added czech defaults}
+% \begin{macrocode}
+\DeclareOption{czech}
+ {%\vref@excuse{czech}%
+ \vref@addto\extrasczech{%
+ \def\reftextfaceafter {na n\'a\-sle\-du\-j\'\i c\'\i\ stran\v{e}}%
+ \def\reftextfacebefore{na p\v{r}ed\-choz\'\i\ stran\v{e}}%
+ \def\reftextafter {na n\'a\-sle\-du\-j\'\i c\'\i\ stran\v{e}}%
+ \def\reftextbefore {na p\v{r}ed\-choz\'\i\ stran\v{e}}%
+ \def\reftextcurrent {na t\'eto stran\v{e}}%
+ \def\reftextfaraway#1{na stran\v{e}~\pageref{#1}}%
+ \def\reftextpagerange#1#2{na stran\'ach~\pageref{#1}\--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} a\v{z}~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Defaults for Danish provided by Torsten Martinsen
+% (\verb=tmar91@kom.auc.dk=). Further defaults by Ole Laursen
+% (\verb=olau@hardworking.dk=).
+% \changes{v1.0n}{1994/09/25}{Added Danish defaults}
+% \changes{v1.2h}{2000/12/30}{Updates to Danish defaults}
+% \begin{macrocode}
+\DeclareOption{danish}
+ {\vref@addto\extrasdanish{%
+ \def\reftextfaceafter {p\aa{} \reftextvario{modst\aa ende}%
+ {n\ae ste} side}%
+ \def\reftextfacebefore{p\aa{} \reftextvario{modst\aa ende}%
+ {forrige} side}%
+ \def\reftextafter {p\aa{} \reftextvario{den f\o lgende}%
+ {n\ae ste} side}%
+ \def\reftextbefore {p\aa{} \reftextvario{forrige side}
+ {foreg\aa ende side}}%
+ \def\reftextcurrent {p\aa{} denne side}%
+ \def\reftextfaraway#1{p\aa{} side~\pageref{#1}}%
+ \def\reftextpagerange#1#2{p\aa{} side~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} til~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Default string for dutch have been contributed by Frank Poppe
+% (\verb=POPPE@SWOV.NL=).
+% This option currently supports one additional string macro
+% |\refpagename| so that you can easily change to |bladzijde|
+% instead of |pagina| if you prefer this word for ``page''.
+% However, I will not guarantee that this will survive future
+% versions of this package, so use it on your own risk (you can
+% always update the full strings to be on the safe side).
+% \changes{v1.0l}{1994/07/07}{Added dutch defaults}
+% \changes{v1.2a}{1998/08/22}{Added dutch defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \begin{macrocode}
+\DeclareOption{dutch}
+ {\vref@addto\extrasdutch{%
+ \def\refpagename{pagina}%
+ \def\reftextfaceafter {op de \reftextvario{rechter \refpagename}%
+ {\refpagename\ hiernaast}}%
+ \def\reftextfacebefore{op de \reftextvario{linker \refpagename}%
+ {\refpagename\ hiernaast}}%
+ \def\reftextafter {op de \reftextvario{volgende \refpagename}%
+ {\refpagename\ hierna}}%
+ \def\reftextbefore {op de \reftextvario{vorige \refpagename}%
+ {\refpagename\ hiervoor}}%
+ \def\reftextcurrent {op deze \refpagename}%
+ \def\reftextfaraway#1{op \refpagename~\pageref{#1}}%
+% \end{macrocode}
+% Concerning the next defaults I received the following comment by
+% Frederik Fouvry \texttt{<fouvry@coli.uni-sb.de>}:
+% ``In the Dutch options (where I can exert a proper language
+% judgement ;-), `t/m' is not used in formal (scientific) texts. I
+% would either use `--' or `tot en met' (the abbreviation written
+% out). ''
+% \changes{v1.4d}{2002/11/11}{Changed default for \cs{reftextlabelrange}}
+% \begin{macrocode}
+ \def\reftextpagerange#1#2{op pagina's~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref#1--\ref{#2}}%
+ }}
+% \end{macrocode}
+% \changes{v1.2a}{1998/08/22}{Added english defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \changes{v1.4d}{2002/11/11}{Changed default for \cs{reftextbefore}}
+% \begin{macrocode}
+\DeclareOption{english}
+ {\vref@addto\extrasenglish{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+\DeclareOption{esperanto}
+ {\vref@excuse{esperanto}%
+ \vref@addto\extrasesperanto{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The finnish strings were suggested by Matti Rintala
+% (\verb=bitti@cs.tut.fi=).
+% \changes{v1.0m}{1994/09/23}{Added finnish strings}
+% \begin{macrocode}
+\DeclareOption{finnish}
+ {\vref@addto\extrasfinnish{%
+ \def\reftextfaceafter {\reftextvario{viereisell\"a}%
+ {seuraavalla} sivulla}%
+ \def\reftextfacebefore{\reftextvario{viereisell\"a}%
+ {edellisell\"a} sivulla}%
+ \def\reftextafter {seuraavalla sivulla}%
+ \def\reftextbefore {edellisell\"a sivulla}%
+ \def\reftextcurrent {t\"all\"a sivulla}%
+ \def\reftextfaraway#1{sivulla~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% French defaults are provided by Daniel Flippo
+% (\verb=Daniel.Flipo@univ-lille1.fr=).
+% \changes{v1.0j}{1994/06/21}{Added french defaults}
+% \changes{v1.2a}{1998/08/22}{Added french defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \begin{macrocode}
+\DeclareOption{french}
+ {\vref@addto\extrasfrench{%
+ \def\reftextfaceafter {page \reftextvario{ci-contre}{suivante}}%
+ \def\reftextfacebefore{page \reftextvario{ci-contre}%
+ {pr\'ec\'edente}}%
+ \def\reftextafter {page suivante}%
+ \def\reftextbefore {page pr\'ec\'edente}%
+ \def\reftextcurrent {de la pr\'esente page}%
+ \def\reftextfaraway#1{page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} \`a~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Galician defaults are provided by Matthias Moebius\\
+% (\texttt{Matthias.Moebius@uni-konstanz.de}).
+% \changes{v1.1f}{1998/04/25}{Added galician defaults}
+% \begin{macrocode}
+\DeclareOption{galician}
+ {\vref@excuse{galician}%
+ \vref@addto\extrasgalician{%
+ \def\reftextfaceafter {na seguinte p\'axina}%
+ \def\reftextfacebefore{na p\'agina anterior}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {nesta p\'axina}%
+ \def\reftextfaraway#1{na p\'axina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% There are no good variants for German (I think and still think but
+% this is a matter of taste :-).
+% \changes{v1.0b}{1994/01/31}{Replace in incorrect `def by `let}
+% The following definitions were recently suggested to me but since
+% the original are in for a long time i don't want to change them
+% now since that could make a lot of documents change their formatting.
+% If you fancy them, add a redefinition of the corresponding macro(s)
+% to the preamble of your document.
+%\begin{verbatim}
+% \def\reftextfaceafter {auf der \reftextvario
+% {gegen\"uberliegenden}{anderen} Seite}%
+% \def\reftextfacebefore {auf der \reftextvario
+% {gegen\"uberliegenden}{anderen} Seite}%
+% \def\reftextafter {auf der \reftextvario
+% {n\"achsten}{folgenden} Seite}%
+% \def\reftextbefore {auf der \reftextvario
+% {vorigen}{vorhergehenden} Seite}%
+% \def\reftextcurrent {\reftextvario
+% {auf dieser}{diese} Seite}%
+%\end{verbatim}
+% \begin{macrocode}
+\DeclareOption{german}
+ {\vref@addto\extrasgerman{%
+ \def\reftextfaceafter {auf der n\"achsten Seite}%
+ \def\reftextfacebefore{auf der vorherigen Seite}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {auf dieser Seite}%
+ \def\reftextfaraway#1{auf Seite~\pageref{#1}}%
+ \def\reftextpagerange#1#2{auf Seiten~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} bis~\ref{#2}}%
+ }}
+% \end{macrocode}
+% \changes{v1.2d}{2000/01/11}{Added ngerman defaults (identical to german)}
+% The ngerman defaults are the same but needed for ``Neue Rechtschreibung''
+% (i.e., a different set of hyphenation patterns).
+% \begin{macrocode}
+\DeclareOption{ngerman}
+ {\vref@addto\extrasngerman{%
+ \def\reftextfaceafter {auf der n\"achsten Seite}%
+ \def\reftextfacebefore{auf der vorherigen Seite}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {auf dieser Seite}%
+ \def\reftextfaraway#1{auf Seite~\pageref{#1}}%
+ \def\reftextpagerange#1#2{auf Seiten~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} bis~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Defaults for greek suggested by Apostolos Syropoulos\\
+% (\verb=apostolo@obelix.ee.duth.gr=).
+% \changes{v1.2a}{1998/08/22}{Added defaults for greek}
+% \begin{macrocode}
+\DeclareOption{greek}
+ {\vref@addto\extrasgreek{%
+ \def\reftextfaceafter {sthn \reftextvario{paro'usa}%
+ {ep'omenh} sel'ida}%
+ \def\reftextfacebefore{sthn \reftextvario{paro'usa}{prohgo'umenh}
+ sel'ida}%
+ \def\reftextafter {sthn ep'omenh sel'ida}%
+ \def\reftextbefore {sthn prohgo'umenh sel'ida}%
+ \def\reftextcurrent {s'' aut'h th sel'ida}%
+ \def\reftextfaraway#1{sth sel'ida\nobreakspace\pageref{#1}}%
+ \def\reftextpagerange#1#2{stis sel'ides\nobreakspace
+ \pageref{#1}---\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} ws\nobreakspace\ref{#2}}%
+ }}
+% \end{macrocode}
+% Defaults for Italian suggested by Giovanni Pensa
+% (\verb=pensa@dsi.unimi.it=) with i{\TeX}nici.
+% \changes{v1.1b}{1995/10/19}{Added defaults for Italian}
+% \changes{v1.2a}{1998/08/22}{Removed incorrect warning}
+% \begin{macrocode}
+\DeclareOption{italian}
+ {\vref@addto\extrasitalian{%
+ \def\reftextfaceafter {\reftextvario{a fronte}%
+ {nella pagina successiva}}%
+ \def\reftextfacebefore{\reftextvario{a fronte}%
+ {nella pagina precedente}}%
+ \def\reftextafter {nella pagina \reftextvario{seguente}%
+ {successiva}}%
+ \def\reftextbefore {nella pagina precedente}%
+ \def\reftextcurrent {in questa pagina}%
+ \def\reftextfaraway#1{a pagina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Defaults for Hungarian by Jeff Goldberg
+% (\verb=jeffrey@goldmark.org=).
+% There is a problem with the use of the definite article
+% \textit{a} or \textit{az} in Hungarian before expansions
+% of |\vref| or |\ref|. The problem is that the the word
+% should be \textit{az} if the number following would begin with
+% a vowel if spelled out, and \textit{a} if the number would begin
+% with a consonant.
+%
+% The option assumes that there is a command |\aza| defined which
+% helps resolving this problem.\footnote{This information is actually quite
+% old but unfortunately never made it into varioref. In case any work
+% has been undertaken to resolve this please inform the author about it.}
+% \changes{v1.2a}{1998/08/22}{Added defaults for magyar}
+% \begin{macrocode}
+\DeclareOption{magyar}
+ {\vref@addto\extrasmagyar{%
+ \def\reftextfaceafter {a k\"o\-vet\-kez\H{o} ol\-da\-lon}%
+ \def\reftextfacebefore{az el\H{o}\-z\H{o} ol\-da\-lon}%
+ \def\reftextfaceafter {\reftextvario{a t\'ul\-ol\-da\-lon}%
+ {a k\"o\-vet\-kez\H{o} ol\-da\-lon}}%
+ \def\reftextfacebefore{\reftextvario{a t\'ul\-ol\-da\-lon}%
+ {az el\H{o}\-z\H{o} ol\-da\-lon}}%
+ \def\reftextcurrent {ezen az ol\-da\-lon}%
+% \end{macrocode}
+% The following suggested patch has not been added yet (pending changes
+% in babel system).
+%\begin{verbatim}
+% \def\reftextfaraway#1{a~\csname @@magyar@az@lowxu\endcsname{\pageref{#1}}.~ol\-da\-lon}%
+% \def\reftextpagerange#1#2{a~\csname @@magyar@az@lowxu\endcsname{\pageref{#1}}%
+% --\pageref{#2}.~ol\-da\-la\-kon}%
+% \def\reftextlabelrange#1#2{{}\csname @@magyar@told\endcsname\ref{#1}+tol
+% \ref{#2}-ig}% Dat: `{}' is here for anti-\capitalize
+%\end{verbatim}
+% \begin{macrocode}
+ \def\reftextfaraway#1{\aza{\pageref{#1}} \pageref{#1}.~ol\-da\-lon}%
+ \def\reftextpagerange#1#2{\vref@stringwarning\reftextpagerange
+ on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\vref@stringwarning\reflabelpagerange
+ \ref{#1} to~\ref{#2}}%
+ }%
+% \end{macrocode}
+% The |\AtBeginDocument| needs to be executed when the option is
+% processed and not inside the babel interface.
+% \changes{v1.4i}{2004/02/27}{Moved \cs{AtBeginDocument}}
+% \begin{macrocode}
+ \AtBeginDocument{\providecommand\aza[1]{a/az%
+ \PackageError{varioref}{%
+ Proper definition for command \noexpand\aza missing}%
+ {You need to (re)define the command \noexpand\aza that
+ takes one argument (a number or a \noexpand\pageref command)
+ and produces the string `a' or `az' depending on the argument
+ value. It should also accept an optional argument (default `l')
+ to denote whether or not the string should be lowercase or
+ uppercase.}}}%
+ }
+% \end{macrocode}
+% The Norwegian and `nynorsk' translations have been provided by
+% Dag F Langmyhr \verb=<dag@ifi.uio.no>= and Karl Ove Hufthammer
+% \verb=<huftis@bigfoot.com>=.
+% \changes{v1.0q}{1995/04/06}{Added defaults for norsk}
+% \changes{v1.0q}{1995/04/06}{Added defaults for nynorsk}
+% \changes{v1.2a}{1998/08/22}{Updated defaults for norsk}
+% \changes{v1.2a}{1998/08/22}{Updated defaults for nynorsk}
+% \changes{v1.2a}{1998/08/22}{Added norsk defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \changes{v1.2a}{1998/08/22}{Added nynorsk defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \changes{v1.2i}{2001/01/12}{Updated nynorsk defaults}
+% \begin{macrocode}
+\DeclareOption{norsk}
+ {\vref@addto\extrasnorsk{%
+ \def\reftextfaceafter {p\aa{} neste side}%
+ \def\reftextfacebefore{p\aa{} forrige side}%
+ \def\reftextafter {p\aa{} neste side}%
+ \def\reftextbefore {p\aa{} forrige side}%
+ \def\reftextcurrent {p\aa{} denne siden}%
+ \def\reftextfaraway#1{p\aa{} side~\pageref{#1}}%
+ \def\reftextpagerange#1#2{p\aa{} side~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} til~\ref{#2}}%
+ }}
+\DeclareOption{nynorsk}
+ {\vref@addto\extrasnynorsk{%
+ \def\reftextfaceafter {p\aa{} neste side}%
+ \def\reftextfacebefore{p\aa{} f\o{}rre side}%
+ \def\reftextafter {p\aa{} neste side}%
+ \def\reftextbefore {p\aa{} f\o{}rre side}%
+ \def\reftextcurrent {p\aa{} denne sida}%
+ \def\reftextfaraway#1{p\aa{} side~\pageref{#1}}%
+ \def\reftextpagerange#1#2{p\aa{} side~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} til~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The polish translations have been provided by
+% Tomasz Michniewski \\
+% \verb=<tomekm@ias.wat.waw.pl>=.
+% The use of the command \verb=\eob= and \verb=aob= etc.\
+% requires appropriate definitions as provided, for example, by
+% the babel system. This should probably be handled differently
+% but it would require modifications in babel's language support.
+% \changes{v1.1d}{1997/12/06}{Added defaults for polish}
+% \changes{v1.2a}{1998/08/22}{Added polish defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \begin{macrocode}
+\DeclareOption{polish}
+ {\vref@addto\extraspolish{%
+ \def\reftextfaceafter {na \reftextvario{s\aob{}siedniej}%
+ {nast\eob{}pnej} stronie}%
+ \def\reftextfacebefore{na \reftextvario{s\aob{}siedniej}%
+ {poprzedniej} stronie}%
+ \def\reftextafter {na nast\eob{}pnej stronie}%
+ \def\reftextbefore {na poprzedniej stronie}%
+ \def\reftextcurrent {na \reftextvario{tej
+ samej}{bie\zkb{}\aob{}cej} stronie}%
+ \def\reftextfaraway#1{na \pageref{#1}~stronie}%
+ \def\reftextpagerange#1#2{na stronach~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{od~\ref{#1} do~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The portuguese default text has been provided by
+% Jos\'e Carlos Oliveira Santos \verb=jcsantos@fc.up.pt=.
+% \changes{v1.2b}{1999/11/25}{Added portuguese defaults}
+% \changes{v1.2c}{1999/12/02}{Added more portuguese defaults}
+% \begin{macrocode}
+\DeclareOption{portuges}
+ {\vref@addto\extraportuges{%
+ \def\reftextfaceafter {na \reftextvario{p\'agina ao lado}{pr\'oxima
+ p\'agina}}%
+ \def\reftextfacebefore{na p\'agina \reftextvario{ao lado}{anterior}}%
+ \def\reftextafter {na \reftextvario{p\'agina seguinte}{pr\'oxima
+ p\'agina}}%
+ \def\reftextbefore{na p\'agina \reftextvario{anterior}{precedente}}%
+ \def\reftextcurrent {nesta p\'agina}%
+ \def\reftextfaraway#1{na p\'agina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{nas p\'aginas~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} a~\ref{#2}}%
+ }}
+\DeclareOption{romanian}
+ {\vref@excuse{romanian}%
+ \vref@addto\extrasromanian{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The text for russian was taken from the book in Russian by
+% I.~A.~Kotelnikov and P.~Z.~Chebotaev, and adapted
+% to the encoding-independent form by Vladimir Volovich
+% (\verb=vvv@vsu.ru=).
+% \changes{v1.2a}{1998/11/23}{Added russion strings}
+% \changes{v1.2a}{1998/11/24}{Added defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \begin{macrocode}
+\DeclareOption{russian}
+ {\vref@addto\extrasrussian{%
+ \def\reftextfaceafter{\cyrn\cyra\ \reftextvario{\cyrp\cyrr\cyro
+ \cyrt\cyri\cyrv\cyro\cyrp\cyro\cyrl\cyro\cyrzh\cyrn\cyro\cyrishrt}%
+ {\cyrs\cyrl\cyre\cyrd\cyru\cyryu\cyrshch\cyre\cyrishrt}\ \cyrs\cyrt
+ \cyrr\cyra\cyrn\cyri\cyrc\cyre}%
+ \def\reftextfacebefore{\cyrn\cyra\ \reftextvario{\cyrp\cyrr\cyro
+ \cyrt\cyri\cyrv\cyro\cyrp\cyro\cyrl\cyro\cyrzh\cyrn\cyro\cyrishrt}%
+ {\cyrp\cyrr\cyre\cyrd\cyrery\cyrd\cyru\cyrshch\cyre\cyrishrt}\
+ \cyrs\cyrt\cyrr\cyra\cyrn\cyri\cyrc\cyre}%
+ \def\reftextafter{\cyrn\cyra\ \cyrs\cyrl\cyre\cyrd\cyru\cyryu\cyrshch
+ \cyre\cyrishrt\ \cyrs\cyrt\cyrr\cyra\cyrn\cyri\cyrc\cyre}%
+ \def\reftextbefore{\cyrn\cyra\ \reftextvario{\cyrp\cyrr\cyre\cyrd
+ \cyrsh\cyre\cyrs\cyrt\cyrv\cyru\cyryu\cyrshch\cyre\cyrishrt}%
+ {\cyrp\cyrr\cyre\cyrd\cyrery\cyrd\cyru\cyrshch\cyre\cyrishrt}%
+ \ \cyrs\cyrt\cyrr\cyra\cyrn\cyri\cyrc\cyre}%
+ \def\reftextcurrent{\cyrn\cyra\ \reftextvario{\cyrerev\cyrt\cyro
+ \cyrishrt}{\cyrd\cyra\cyrn\cyrn\cyro\cyrishrt}\ \cyrs\cyrt\cyrr
+ \cyra\cyrn\cyri\cyrc\cyre}%
+ \def\reftextfaraway#1{\cyrn\cyra\ \cyrs.~\pageref{#1}}%
+ \def\reftextpagerange#1#2{\cyrn\cyra\ \cyrs\cyrt\cyrr\cyra\cyrn
+ \cyri\cyrc\cyra\cyrh~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\cyrs~\ref{#1}\ \cyrp\cyro~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The text for slovak defaults was contributed by Miroslav Sedivy\\
+% (\verb=<miro@slovensko.com>=).
+% \changes{v1.4b}{2002/03/11}{Contributed defaults added}
+% \begin{macrocode}
+\DeclareOption{slovak}
+ {\vref@addto\extrasslovak{%
+ \def\reftextfaceafter {na \reftextvario{proti\v lahlej}%
+ {nasleduj\'ucej} strane}%
+ \def\reftextfacebefore{na \reftextvario{proti\v lahlej}%
+ {predch\'adzaj\'ucej} strane}%
+ \def\reftextafter {na \reftextvario{nasleduj\'ucej}%
+ {\v dal\v sej} strane}%
+ \def\reftextbefore {na \reftextvario{predch\'adzaj\'ucej}%
+ {predo\v slej} strane}%
+ \def\reftextcurrent {na tejto strane}%
+ \def\reftextfaraway#1{na strane~\pageref{#1}}%
+ \def\reftextpagerange#1#2{na stran\'ach~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} a\v z~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The text for slovene defaults was contributed by Roman Maurer\\
+% (\verb=<roman.maurer@amis.net>=).
+% \changes{v1.4a}{2002/03/05}{Contributed defaults added}
+% \begin{macrocode}
+\DeclareOption{slovene}
+ {\vref@addto\extrasslovene{%
+ \def\reftextfaceafter {na naslednji strani}%
+ \def\reftextfacebefore{na prej\v{s}nji strani}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {na \reftextvario{tej}{trenutni} strani}%
+ \def\reftextfaraway#1{na strani~\pageref{#1}}%
+ \def\reftextpagerange#1#2{na straneh~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{od~\ref{#1} do~\ref{#2}}%
+ }}
+% \end{macrocode}
+% Text for spanish defaults was contributed by Julio Sanchez
+% (\verb=jsanchez@gmv.es=) and Fernando Dobladez (\verb=<ferd@fuego.com>=).
+% \changes{v1.0f}{1994/03/16}{Inserted missing hash mark}
+% \changes{v1.0k}{1994/06/05}{Corrected misspelled cmd `extrasspanish}
+% \changes{v1.4a}{2002/03/05}{Missing defaults added}
+% \begin{macrocode}
+\DeclareOption{spanish}
+ {\vref@addto\extrasspanish{%
+ \def\reftextfaceafter {en la p\'agina siguiente}%
+ \def\reftextfacebefore{en la p\'agina anterior}%
+ \let\reftextafter \reftextfaceafter
+ \let\reftextbefore \reftextfacebefore
+ \def\reftextcurrent {en esta p\'agina}%
+ \def\reftextfaraway#1{en la p\'agina~\pageref{#1}}%
+ \def\reftextpagerange#1#2{en las p\'aginas~\pageref{#1}%
+ --\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} a~\ref{#2}}%
+ }}
+% \end{macrocode}
+% The text for swedish was contributed by Mats Dahlgren
+% (\verb=matsd@sssk.se=).
+% \changes{v1.0p}{1995/01/10}{Added swedish strings}
+% \changes{v1.2a}{1998/08/22}{Added swedish defaults for
+% \cs{reftextpagerange} and \cs{reftextlabelrange}}
+% \begin{macrocode}
+\DeclareOption{swedish}
+ {\vref@addto\extrasswedish{%
+ \def\reftextfaceafter {p\aa\ \reftextvario{motst\aa ende}%
+ {n\"{a}sta} sida}%
+ \def\reftextfacebefore{p\aa\ \reftextvario{motst\aa ende}%
+ {f\"{o}reg\aa ende} sida}%
+ \def\reftextafter {p\aa\ \reftextvario{f\"{o}ljande}%
+ {n\"{a}sta} sida}%
+ \def\reftextbefore {p\aa\ f\"{o}reg\aa ende sida}%
+ \def\reftextcurrent {p\aa\ denna sida}%
+ \def\reftextfaraway#1{p\aa\ sidan~\pageref{#1}}%
+ \def\reftextpagerange#1#2{p\aa\
+ sidorna~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} till~\ref{#2}}%
+ }}
+\DeclareOption{turkish}
+ {\vref@excuse{turkish}%
+ \vref@addto\extrasturkish{%
+ \def\reftextfaceafter {on the \reftextvario{facing}{next} page}%
+ \def\reftextfacebefore{on the \reftextvario{facing}{preceding}
+ page}%
+ \def\reftextafter {on the \reftextvario{following}{next} page}%
+ \def\reftextbefore {on the \reftextvario{preceding}{previous} page}%
+ \def\reftextcurrent {on \reftextvario{this}{the current} page}%
+ \def\reftextfaraway#1{on page~\pageref{#1}}%
+ \def\reftextpagerange#1#2{on pages~\pageref{#1}--\pageref{#2}}%
+ \def\reftextlabelrange#1#2{\ref{#1} to~\ref{#2}}%
+ }}
+% \end{macrocode}
+% We support francais as an alternative to french since people
+% might be used to it, but we discurrage it.
+% \begin{macrocode}
+\DeclareOption{francais}{%
+ \typeout{Please use `french' instead of `francais'}%
+ \ExecuteOptions{french}}
+\DeclareOption{germanb}{%
+ \typeout{Please use `german' instead of `germanb'}%
+ \ExecuteOptions{german}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% During document preparation errors due to |\vref| are usually of
+% not much interest. For this reason the draft option turns them into
+% warnings by issuing a |\vrefwarning| command. The final option
+% (default) stops with an error message when varioref detects a possible
+% loop.
+% \changes{v1.1h}{1998/08/01}{Added draft and final options}
+% \begin{macrocode}
+\DeclareOption{draft}{\AtEndOfPackage\vrefwarning}
+\DeclareOption{final}{\AtEndOfPackage\vrefshowerrors} % the default
+% \end{macrocode}
+%
+% After all options are declared we execute the default option
+% \texttt{english} to set up the defaults and then call
+% |\ProcessOptions*| to handle any option passed to the package.
+% The star form is used since we want to execute the options in the
+% order they are given (in case this isn't used together with the
+% \texttt{babel} package).
+% \begin{macrocode}
+\ExecuteOptions{english,final}
+\ProcessOptions*
+% \end{macrocode}
+%
+%
+% \subsection{Defining the main macros}
+%
+% \begin{macro}{\vr@cnt}
+% To generate new labels we use a counter and construct the
+% internal label names by prefixing the current counter value with
+% the string |vr@|. We need a \LaTeX{} counter to get |\include|s
+% handled correctly.
+% \changes{v0.1e}{1992/11/15}{use LaTeX counter}
+% \begin{macrocode}
+\newcounter{vrcnt}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\vpageref}
+% \changes{v1.3a}{2001/04/12}{Scan for star form}
+% \begin{macro}{\vp@geref}
+% The command |\vpageref| generates the appropriate string by first
+% parsing the optional arguments (if any) and then compares the
+% internal and the user label. This command should be robust since
+% the user might put it anywhere.
+%
+% We now start by scanning for a star which means: do not add a
+% space in front of the generated text---ever.
+% \begin{macrocode}
+\DeclareRobustCommand\vpageref{\@ifstar
+ {\let\vref@space\relax\vp@geref}%
+ {\let\vref@space\space\vp@geref}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\vp@geref{\@ifnextchar[%
+% \end{macrocode}
+% The default for the first optional argument is the string hidden
+% in the macro |\reftextcurrent|.
+% \begin{macrocode}
+ \@vpageref{\@vpageref[\reftextcurrent]}%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\vref@space}
+% \changes{v1.4a}{2002/03/06}{Default added}
+% A default for |\vref@space|. This isn't really needed except in
+% the case that somebody has hooked into the \texttt{varioref}
+% interfaces at a lower level (which isn't really supported,
+% but\ldots). So giving a default will prevent an error message in
+% that case (and should hopefully produce the same behavior as before).
+% \begin{macrocode}
+\let\vref@space\space
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@vpageref}
+% More parsing\ldots
+% \begin{macrocode}
+\def\@vpageref[#1]{\@ifnextchar[%
+% \end{macrocode}
+% The default for the second optional argument is a space which is
+% prefixed by |\unskip| to get rid of any leading space inserted
+% already.
+% \changes{v1.0h}{1994/06/11}{Pass first argument in both cases}
+% \changes{v1.0i}{1994/06/20}{Do it correctly}
+% \begin{macrocode}
+ {\@@vpageref{#1}}{\@@vpageref{#1}[\unskip\vref@space]}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@@vpageref}
+% The |\@@vpageref| macro finally generates the references by
+% comparing the value of an internal label with the value of the
+% user label.
+% \changes{v1.0h}{1994/06/11}{Change internal interface}
+% \begin{macrocode}
+\def\@@vpageref#1[#2]#3{%
+% \end{macrocode}
+% First it switches to horizontal mode if necessary and also
+% removes any leading space.
+% \begin{macrocode}
+ \leavevmode\unskip
+% \end{macrocode}
+% Then it advances the counter |\c@vrcnt| by one which is used to
+% generate internal label names.
+% \begin{macrocode}
+ \global\advance\c@vrcnt\@ne
+% \end{macrocode}
+% Then it checks if for the current value of |\c@vrcnt| a label
+% command was issued in the last run. If not it pretends that there
+% was one with the value |{??}{??}|. Thereafter it stores the the
+% pageref value for this label in the macro |\@tempa|.
+% \begin{macrocode}
+ \vref@pagenum\@tempa{\the\c@vrcnt @vr}%
+% \end{macrocode}
+% Here we check that the generated text is not going across a page
+% boundary.
+% \changes{v0.1f}{1993/01/01}{Add another label to catch cross-overs}
+% \begin{macrocode}
+ \vref@pagenum\@tempb{\the\c@vrcnt @xvr}%
+% \end{macrocode}
+% \changes{v1.0l}{1994/07/07}{Explicitly expand `label argument for
+% babel}
+% In version 1.0l the label string has been turned around so that
+% the number comes first. This was done to allow easy explicit
+% expansion of the number before it is passed to the |\label|
+% command. In the babel system the argument of |label| was not
+% expanded with the result that wrong label strings have been
+% generated. This is a general problem that might need a completely
+% different solution in babel but for now the change below (and in
+% some other places in the code) should solve the problem for this
+% special combination of packages.
+%
+% These days we actually use |\vref@label| instead of |\label| as
+% this avoids problems with Babel or \texttt{amsmath} redefining
+% the latter command.
+% \changes{v1.4e}{2003/01/08}{Use \cs{vref@label} instead of
+% \cs{label} (pr/3489)}
+% \begin{macrocode}
+ \vref@label{\the\c@vrcnt @xvr}%
+% \end{macrocode}
+% \changes{v1.1g}{1998/05/10}{Test if inside AMS display (pr2175)}
+% Inside displays of the \texttt{amsmath} package the |\label| command
+% is redefined which makes the test for loops incorrect if a |\vref|
+% is used in, say, |\intertext|. So we test this condition first and
+% only do the test if |\label| doesn't have a special meaning.
+% [This is no longer necessary as |\label| isn't used any more]
+% \begin{macrocode}
+% \ifx\label\label@in@display\else
+ \ifx\@tempa\@tempb\else
+% \end{macrocode}
+% If both points do not fall onto the same page with either issue
+% an error or a warning message.
+% \changes{v1.0g}{1994/05/27}{Looping pages shown in wrong order}
+% \begin{macrocode}
+ \vref@err{\noexpand\vref or \noexpand\vpageref at page boundary
+ \@tempb-\@tempa\space (may loop)%
+ }%
+ \fi
+% \fi
+% \end{macrocode}
+% Same game for the user requested label; this time the page
+% reference is saved in |\thevpagerefnum|.
+% \changes{v1.4c}{2002/06/14}{Use \cs{thevpagerefnum} instead of \cs{@tempb}}
+% \begin{macrocode}
+ \vrefpagenum\thevpagerefnum{#3}%
+% \end{macrocode}
+% Now after the internal label has served its purpose if would be
+% nice to free the memory it occupies by using something like
+% \begin{verbatim}
+% \global\expandafter\let
+% \csname r@\the\c@vrcnt @vr\endcsname\@empty
+%\end{verbatim}
+% But this is not possible because it would result in getting
+% `Labels may have changed\ldots' warnings for every run. Now we
+% are ready to produce the textual strings. Since we have removed
+% any leading space we now insert a space (unless this was the star
+% form of the command) and then compare the two
+% page references.
+% \begin{macrocode}
+ \vref@space
+ \ifx\@tempa\thevpagerefnum
+% \end{macrocode}
+% If they are the same we insert the first argument into the input
+% stream. Otherwise we insert the second argument. Recall that
+% those are the two optional arguments of |...|. However, if the
+% user explicitly requested an empty text string using the optional
+% argument we cancel any preceeding space.
+% \changes{v1.2f}{2000/07/07}{Don't output space if optional argument
+% empty (pr/3230)}
+% \begin{macrocode}
+ \def\@tempc{#1}%
+ \ifx\@tempc\@empty
+ \unskip
+ \else
+ #1%
+ \fi
+ \else
+ #2%
+% \end{macrocode}
+% Now we check if the page number of the referenced object (stored
+% in |\thevpagerefnum| is a single positive number.
+% \begin{macrocode}
+ \is@pos@number\thevpagerefnum
+ {%
+% \end{macrocode}
+% If so, we check if the current position (stored in |\@tempa|) is
+% a positive number. If this is the case we assign this number to
+% the counter register |\@tempcnta| and add one to it.
+% \begin{macrocode}
+ \is@pos@number\@tempa
+ {\@tempcnta\@tempa
+ \advance\@tempcnta\@ne
+ }%
+% \end{macrocode}
+% If it is not a positive number we assign the largest possible
+% number to |\@tempcnta| and thereby pretending that label and
+% reference are miles away from each other.
+% \begin{macrocode}
+ {\@tempcnta\maxdimen}%
+% \end{macrocode}
+% Now we are ready to check if reference and object are on nearby
+% pages. |\thevpagerefnum| will expand to the page number of the object
+% (and we know that this is a number) and |\@tempcnta| is either
+% one higher than the reference page or completely out of bounds.
+% So if both represend the same value then the object lies one page
+% after its reference.
+% \begin{macrocode}
+ \ifnum \thevpagerefnum =\@tempcnta
+% \end{macrocode}
+% Thus if the object falls onto an odd page then the reference is
+% on the facing even page (and so we insert |\reftextfaceafter|),
+% otherwise the object can not be seen from the reference (and we
+% in insert |\reftextafter|). Don't be surprised if we are not
+% using |\thevpagerefnum| in the check. Since |\@tempcnta| has the same
+% value it is faster to use the register instead of parsing the
+% macro contents anew.
+% \begin{macrocode}
+ \ifodd\@tempcnta
+% \end{macrocode}
+% In fact we are going to use |\reftextfaceafter| only if we are
+% doing two-sided printing, otherwise |\reftextafter| is always
+% used.
+% Since the value of |\if@twoside| is evaluated before reading in
+% packages we could do better (saving some tokens) by defining
+% the current macro in dependence of this boolean.
+% \begin{macrocode}
+ \if@twoside
+ \reftextfaceafter
+ \else
+ \reftextafter
+ \fi
+ \else
+ \reftextafter
+ \fi
+% \end{macrocode}
+% If the object is not on the page following the reference we check
+% if it is on the page before the reference. In \LaTeX{} this
+% situation is not too common, for example with floats it normally
+% does not occur, but of course it isn't impossible if you more
+% than one reference to the same object, or if you have back
+% references to sections, theorems, etc. To test this we now
+% substract two from the current value of |\@tempcnta| (which was
+% set to one higher as the reference page number). Note, that
+% substraction is also possible if the value was |\maxdimen| --- we
+% still get something that is much larger than any sensible page
+% number.
+% \begin{macrocode}
+ \else
+ \advance\@tempcnta-2
+% \end{macrocode}
+% If now |\thevpagerefnum| and |\@tempcnta| have the same value then the
+% object lies one page before the reference.
+% \begin{macrocode}
+ \ifnum \thevpagerefnum =\@tempcnta
+% \end{macrocode}
+% Again we have to check for odd or even pages to distinguish
+% between the facing and the non-facing situation.
+% \begin{macrocode}
+ \ifodd\@tempcnta
+ \reftextbefore
+ \else
+% \end{macrocode}
+% Again the |\reftextfacebefore| only if |@twoside| evaluates to
+% true.
+% \begin{macrocode}
+ \if@twoside
+ \reftextfacebefore
+ \else
+ \reftextbefore
+ \fi
+ \fi
+% \end{macrocode}
+% If the above test also returns false then we have object and
+% references on pages which are far away or don't contain simple
+% page numbers. Therefore we generate the |\reftextfaraway| string.
+% Recall that this is a macro which has the user label as an
+% argument.
+% \begin{macrocode}
+ \else
+ \reftextfaraway{#3}%
+ \fi
+ \fi
+ }%
+% \end{macrocode}
+% We do the same if our first test (that the page with the object
+% has a positive page number) turns out to be false.
+% \begin{macrocode}
+ {\reftextfaraway{#3}}%
+ \fi
+% \end{macrocode}
+% Finally we generate the internal label so that it can be check on
+% the next run. This means that we compare the position after the
+% string with the position of the referenced object. There is one
+% thing to note: to conserve space we locally make |\@currentlabel|
+% empty since we are only interested in the page number value of
+% this internal label.
+% \changes{v1.0l}{1994/07/07}{Explicitly expand \cs{label} argument for babel}
+%
+% These days we actually use |\vref@label| instead of |\label| as
+% this avoids problems with Babel or \texttt{amsmath} redefining
+% the latter command.
+% \changes{v1.4e}{2003/01/08}{Use \cs{vref@label} instead of
+% \cs{label} (pr/3489)}
+% \begin{macrocode}
+ \vref@label{\the\c@vrcnt @vr}%
+}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\vref@label}
+% \changes{v1.4e}{2003/01/08}{Macro added (pr/3489)}
+% This macro is like |\label| in the kernel but without passing on
+% |\@currentlabel|, ie useful if all we are interested in is the
+% page number. It also has the effect that it is uneffected by
+% \texttt{amsmath} or Babel redefining the |\label| command.
+% \begin{macrocode}
+\def\vref@label#1{\@bsphack
+ \protected@write\@auxout{}%
+ {\string\newlabel{#1}{{}{\thepage}}}%
+ \@esphack}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\vpagerefnum}
+% \changes{v1.4c}{2002/06/14}{Macro added}
+% This macro allows to define |\reftextafter| and friends to refer
+% to the page number rather than producing a textual reference.
+% \begin{macrocode}
+\let\thevpagerefnum\@empty
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\vrefwarning}
+% \changes{v0.1g}{1993/02/14}{Macro added}
+% \begin{macro}{\vrefshowerrors}
+% \changes{v1.1h}{1998/08/01}{Macro added}
+% \begin{macro}{\vref@err}
+% \changes{v0.1g}{1993/02/14}{Macro added}
+% When the |\vref| command detects a possible crossing over a page
+% boundary it will call |\vref@err| to generate an error message.
+% During document preparation one can turn such errors into
+% warnings by issuing a |\vrefwarning| declaration.
+% \changes{v1.0g}{1993/02/14}{Macro added}
+% \begin{macrocode}
+\def\vrefwarning{\def\vref@err{\PackageWarning{varioref}}}
+% \end{macrocode}
+% \begin{macrocode}
+\def\vrefshowerrors{\def\vref@err##1{\PackageError{varioref}{##1}%
+ {Please check the pages in question. You might need to replace
+ the \string\vref\MessageBreak
+ or \noexpand\vpageref by a normal \noexpand\(page)ref to
+ stop LaTeX running forever.}}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\vref}
+% \changes{v1.3a}{2001/04/12}{Scan for star form}
+% We start by scanning for a star form in which case we do not put
+% any space before the generated text (only remove some).
+% \begin{macro}{\vr@f}
+% \begin{macrocode}
+\DeclareRobustCommand\vref{\@ifstar
+ {\let\vref@space\relax\vr@f}%
+ {\let\vref@space\nobreakspace\vr@f}}
+% \end{macrocode}
+% And now we do the real work\ldots
+% \changes{v1.3c}{2001/09/04}{Correct typo in name}
+% \begin{macrocode}
+\def\vr@f#1{%
+% \end{macrocode}
+% The use of|\nobreakspace| or |~| after the |\unskip| means that
+% this command will always produce a normal space while
+% something like |\nobreak\space| will
+% react to settings of |\nonfrenchspacing|.
+% Unfortunately the latter will also act in cases where one really
+% wants a normal space, e.g., in |Fig.~\vref{..}|, resulting in
+% a large extra space after the dot. For this reason the first solution
+% is used.
+% \changes{v1.1e}{1998/03/09}{Don't use \cs{nobreakspace} (pr/1866)}
+% \changes{v1.2a}{1998/11/27}{Use \cs{nobreakspace} (pr/2909)}
+% \changes{v1.2a}{1998/11/27}{Add \cs{leavevmode}}
+%
+% Above comments all refer to the earlier versions where there was
+% no posibility to suppress the space at all. By now we have
+% |\vref*| and |\vpageref*| to suppress the in internally generated
+% space by redefining |\vref@space| appropriately.
+% \begin{macrocode}
+ \leavevmode\unskip\vref@space
+ \ref{#1}%
+% \end{macrocode}
+% That means we have have to use |\vpageref| and not the internal
+% |\@vpageref| --- otherwise we would pick up the
+% ``current'' definition for |\vref@space| instead of setting it
+% back to |\space|.
+% \changes{v1.4c}{2002/06/18}{Use \cs{vpageref} not \cs{@vpageref} (pr/3403)}
+% \begin{macrocode}
+ \vpageref[\unskip]{#1}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\is@pos@number}
+% The utility macro |\is@pos@number| takes three arguments: a
+% string that is tested for being a valid integer and the actions
+% to be taken in case the test comes out true or false.
+%
+% We start by passing the string to the macro |\is@pos@num| after
+% prefixing it with a \texttt{0} and adding a space after it. To have
+% a well defined ending point we also add |\@nil| at the end.
+%\label{isposnumber}
+% \begin{macrocode}
+\def\is@pos@number#1{\is@pos@num0#1\space\@nil}
+% \end{macrocode}
+% Now we parse the enlarged string into a counter register. To get
+% control back after everything that is regarded by \TeX{} as a
+% number is put into that register we assign |\is@pos@num@| to the
+% |\afterassignment| token. Since the string started with 0, we
+% can be sure that the register assignment will be carried out
+% without an error message. In case of counter assignments leading
+% zeros are discarded.
+% \begin{macrocode}
+\def\is@pos@num{\afterassignment\is@pos@num@ \count@}
+% \end{macrocode}
+% Now we have to check whether or not the whole string was parsed
+% into that register or some remainder was left over. Since we have
+% added a |\@nil| token at the very end we can use that to delimit
+% the argument of |\is@pos@num@|. Note, that the added space in
+% |\is@pos@number| \vpageref[above]{isposnumber} gets parsed away
+% by the counter assignment. If it would be missing, and the full
+% string would consist of a number, \TeX{}would try to replace
+% |\@nil| by its definition to see if it would contain additional
+% digits and thus we would be in trouble at this point.
+% \begin{macrocode}
+\def\is@pos@num@#1\@nil{%
+% \end{macrocode}
+% Now we have to check if the argument is empty. We can do this
+% with an |\if| test (i.e., in an expandable way) since we know for
+% sure that it can not start with a digit
+% \begin{macrocode}
+ \if0#10%
+% \end{macrocode}
+% Depending on the result we execute the second or third argument
+% of the command |\is@pos@number| using a technique that removes
+% the |\else| or |\fi| from the input stream first, so that in
+% principle input stream parsing could be done from within the
+% arguments.
+% \begin{macrocode}
+ \expandafter\@firstoftwo \else
+ \expandafter\@secondoftwo \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\reftextvario}
+% This macro gives a little bit of random variation in the text
+% because the outcome depends on the number of |\vref| commands
+% seen before.
+% \begin{macrocode}
+\def\reftextvario#1#2{\ifodd\c@vrcnt #1\else#2\fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\fullref}
+% And here is the primitive command that always produces a |\ref|
+% and a |\pageref|.
+% \begin{macrocode}
+\def\fullref#1{\ref{#1} \reftextfaraway{#1}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsubsection{Supporting ranges}
+%
+% \begin{macro}{\vref@pagenum}
+% \changes{v1.2a}{1998/08/01}{Macro added}
+% This command takes a label as |#1| extracts the page number
+% associated with it and saves the result in a csname which is
+% passed as |#1|. If the label isn't associates with a page number
+% it essentially associates it with |??| for both the label number
+% and the page, thus defining the label this way. This means that
+% no label warning is generated for this label in case it is
+% undefined.
+% \begin{macrocode}
+\def\vref@pagenum#1#2{%
+ \@ifundefined{r@#2}{\@namedef{r@#2}{{??}{??}}}{}%
+ \edef#1{\expandafter\expandafter\expandafter
+ \@cdr\csname r@#2\endcsname
+ \@nil}%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\vrefpagenum}
+% \changes{v1.2a}{1998/08/01}{Macro added}
+% Same as the above but this time we generate a warning for
+% undefined labels.
+% \begin{macrocode}
+\def\vrefpagenum#1#2{%
+ \@ifundefined{r@#2}%
+ {\G@refundefinedtrue
+ \@latex@warning{Reference `#2' on page \thepage \space
+ undefined}}{}%
+ \vref@pagenum{#1}{#2}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\vpagerefrange}
+% \begin{macro}{\@vpagerefrange}
+% \begin{macro}{\@svpagerefrange}
+% \changes{v1.2a}{1998/08/01}{Macro added}
+% \changes{v1.3b}{2001/04/14}{Scan for star form}
+% If both labels refer to the same page then we produce a
+% |\vpageref|. Otherwise we produce the result of
+% |\reftextpagerange|.
+%
+% One could think of making this command even more clever by
+% producing a special string if the difference between the two page
+% number is one (but this is not done).
+%
+% We need two versions to implement a star form:
+% \begin{macrocode}
+\newcommand\@svpagerefrange[3][\reftextcurrent]{%
+ \vrefpagenum\@tempa{#2}%
+ \vrefpagenum\@tempb{#3}%
+ \ifx\@tempa\@tempb
+ \vpageref*[#1]{#2}%
+ \else
+ \reftextpagerange{#2}{#3}%
+ \fi
+}
+% \end{macrocode}
+% And the same but using |\vpageref|:
+% \begin{macrocode}
+\newcommand\@vpagerefrange[3][\reftextcurrent]{%
+ \vrefpagenum\@tempa{#2}%
+ \vrefpagenum\@tempb{#3}%
+ \ifx\@tempa\@tempb
+ \vpageref[#1]{#2}%
+ \else
+ \reftextpagerange{#2}{#3}%
+ \fi
+}
+% \end{macrocode}
+% And here we put things together.
+% \begin{macrocode}
+\newcommand\vpagerefrange{\@ifstar\@svpagerefrange\@vpagerefrange}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\vrefrange}
+% \changes{v1.2a}{1998/08/01}{Macro added}
+% \begin{macrocode}
+\newcommand\vrefrange[3][\reftextcurrent]
+ {\reftextlabelrange{#2}{#3} \vpagerefrange[#1]{#2}{#3}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{An extension of counter referencing}
+%
+% \begin{macro}{\refstepcounter}
+% \changes{v1.4a}{2002/02/24}{Macro redefined}
+%
+% At the moment a reference to a counter |foo| will generate the
+% equivalent of |\p@foo\thefoo| although not quite in this form. For
+% some applications it would be nice of one could have |\thefoo| being
+% an argument to |\p@foo| to be able to put material before and after
+% the number generated by |\thefoo|. This can be easily achieved with
+% a small change to one of the kernel commands as follows:
+% \begin{macrocode}
+\def\refstepcounter#1{\stepcounter{#1}%
+ \protected@edef\@currentlabel
+ {\csname p@#1\expandafter\endcsname\csname the#1\endcsname}%
+}
+% \end{macrocode}
+% The trick is to ensure that |\csname the#1\endcsname| is turned into
+% a single token before |\p@...| is expanded further. This way, if the
+% |\p@...| command is a macro with one argument it will receive
+% |\the...|. With the kernel code (i.e., without the |\expandafter|)
+% it will instead pick up |\csname| which would be disastrous.
+%
+% Using |\expandafter| instead of braces delimiting the argument is
+% better because, assuming that the |\p@...| command is not defined as
+% a macro with one argument, the braces will stay and prohibit kerning
+% that might otherwise happen between the glyphs generated by
+% |\the...| and surrounding glyphs.
+% \end{macro}
+%
+% \begin{macro}{\labelformat}
+% \changes{v1.4a}{2002/02/24}{Macro added}
+% A shortcut to set the |\p@...| macro for a counter. It will pick
+% up the counter representation as an argument so that it can be
+% specially formatted.
+% \begin{macrocode}
+\def\labelformat#1{\expandafter\def\csname p@#1\endcsname##1}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ref}
+% \changes{v1.4a}{2002/02/24}{Macro added}
+% This macro expands the result of |\ref| and then uppercases the
+% first token. Only useful if the label was generated via
+% |\labelformat| and contains some lower case letter at its start. If
+% the label starts with a complicated construct (e.g., an accented
+% letter) one has to surround everything that needs uppercasing in
+% a brace group in the definition of |\labelformat|.\footnote{There
+% is one problem with this approach: the braces are kept in a
+% normal \texttt{\textbackslash ref} which might spoil kerning.
+% Perhaps one day this needs redoing.}
+% \begin{macrocode}
+\DeclareRobustCommand\Ref[1]{\protected@edef\@tempa{\ref{#1}}%
+ \expandafter\MakeUppercase\@tempa}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Vref}
+% \changes{v1.4a}{2002/02/24}{Macro added}
+% \begin{macro}{\Vr@f}
+% \changes{v1.4a}{2002/02/24}{Macro added}
+% |\Vref| is the counterpart to |\vref| with |\ref| replaced by
+% |\Ref| in its definition.
+% \begin{macrocode}
+\DeclareRobustCommand\Vref{\@ifstar
+ {\let\vref@space\relax\Vr@f}%
+ {\let\vref@space\nobreakspace\Vr@f}}
+\def\Vr@f#1{%
+ \leavevmode\unskip\vref@space
+ \Ref{#1}%
+ \@vpageref[\unskip]{#1}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+% \Finale
+%
+\endinput
+