diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/oberdiek/hobsub.dtx')
| -rw-r--r-- | Master/texmf-dist/source/latex/oberdiek/hobsub.dtx | 1310 |
1 files changed, 1310 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/oberdiek/hobsub.dtx b/Master/texmf-dist/source/latex/oberdiek/hobsub.dtx new file mode 100644 index 00000000000..dfee0c4ede6 --- /dev/null +++ b/Master/texmf-dist/source/latex/oberdiek/hobsub.dtx @@ -0,0 +1,1310 @@ +% \iffalse meta-comment +% +% Copyright (C) 2011 by +% Heiko Oberdiek <heiko.oberdiek at googlemail.com> +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either +% version 1.3c of this license or (at your option) any later +% version. This version of this license is in +% http://www.latex-project.org/lppl/lppl-1-3c.txt +% and the latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of +% LaTeX version 2005/12/01 or later. +% +% This work has the LPPL maintenance status "maintained". +% +% This Current Maintainer of this work is Heiko Oberdiek. +% +% The Base Interpreter refers to any `TeX-Format', +% because some files are installed in TDS:tex/generic//. +% +% This work consists of the main source file hobsub.dtx +% and the derived files +% hobsub.sty, hobsub.pdf, hobsub.ins, hobsub.drv, hobsub-generic.sty, +% hobsub-hyperref.sty, hobsub-test1.tex. +% +% Distribution: +% CTAN:macros/latex/contrib/oberdiek/hobsub.dtx +% CTAN:macros/latex/contrib/oberdiek/hobsub.pdf +% +% Unpacking: +% (a) If hobsub.ins is present: +% tex hobsub.ins +% (b) Without hobsub.ins: +% tex hobsub.dtx +% (c) If you insist on using LaTeX +% latex \let\install=y\input{hobsub.dtx} +% (quote the arguments according to the demands of your shell) +% +% Documentation: +% (a) If hobsub.drv is present: +% latex hobsub.drv +% (b) Without hobsub.drv: +% latex hobsub.dtx; ... +% The class ltxdoc loads the configuration file ltxdoc.cfg +% if available. Here you can specify further options, e.g. +% use A4 as paper format: +% \PassOptionsToClass{a4paper}{article} +% +% Programm calls to get the documentation (example): +% pdflatex hobsub.dtx +% makeindex -s gind.ist hobsub.idx +% pdflatex hobsub.dtx +% makeindex -s gind.ist hobsub.idx +% pdflatex hobsub.dtx +% +% Installation: +% TDS:tex/generic/oberdiek/hobsub.sty +% TDS:tex/generic/oberdiek/hobsub-generic.sty +% TDS:tex/generic/oberdiek/hobsub-hyperref.sty +% TDS:doc/latex/oberdiek/hobsub.pdf +% TDS:doc/latex/oberdiek/test/hobsub-test1.tex +% TDS:source/latex/oberdiek/hobsub.dtx +% +%<*ignore> +\begingroup + \catcode123=1 % + \catcode125=2 % + \def\x{LaTeX2e}% +\expandafter\endgroup +\ifcase 0\ifx\install y1\fi\expandafter + \ifx\csname processbatchFile\endcsname\relax\else1\fi + \ifx\fmtname\x\else 1\fi\relax +\else\csname fi\endcsname +%</ignore> +%<*install> +\input docstrip.tex +\Msg{************************************************************************} +\Msg{* Installation} +\Msg{* Package: hobsub 2011/01/30 v1.0 Subsetting bundle oberdiek (HO)} +\Msg{************************************************************************} + +\keepsilent +\askforoverwritefalse + +\let\MetaPrefix\relax +\preamble + +This is a generated file. + +Copyright (C) 2011 by + Heiko Oberdiek <heiko.oberdiek at googlemail.com> + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either +version 1.3c of this license or (at your option) any later +version. This version of this license is in + http://www.latex-project.org/lppl/lppl-1-3c.txt +and the latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of +LaTeX version 2005/12/01 or later. + +This work has the LPPL maintenance status "maintained". + +This Current Maintainer of this work is Heiko Oberdiek. + +The Base Interpreter refers to any `TeX-Format', +because some files are installed in TDS:tex/generic//. + +This work consists of the main source file hobsub.dtx +and the derived files + hobsub.sty, hobsub.pdf, hobsub.ins, hobsub.drv, hobsub-generic.sty, + hobsub-hyperref.sty, hobsub-test1.tex. + +\endpreamble +\let\MetaPrefix\DoubleperCent + +\generate{% + \file{hobsub.ins}{\from{hobsub.dtx}{install}}% + \file{hobsub.drv}{\from{hobsub.dtx}{driver}}% + \usedir{tex/generic/oberdiek}% + \file{hobsub.sty}{\from{hobsub.dtx}{package}}% + \usedir{doc/latex/oberdiek/test}% + \file{hobsub-test1.tex}{\from{hobsub.dtx}{test1}}% +} +\generate{% + \usedir{tex/generic/oberdiek}% + \file{hobsub-generic.sty}{% + \from{hobsub.dtx}{generic,preamble,infwarerr}% + \from{infwarerr.dtx}{package}% + \from{hobsub.dtx}{post,ltxcmds}% + \from{ltxcmds.dtx}{package}% + \from{hobsub.dtx}{post,ifluatex}% + \from{ifluatex.dtx}{package}% + \from{hobsub.dtx}{post,ifvtex}% + \from{ifvtex.dtx}{package}% + \from{hobsub.dtx}{post,intcalc}% + \from{intcalc.dtx}{package}% + \from{hobsub.dtx}{post,ifpdf}% + \from{ifpdf.dtx}{package}% + \from{hobsub.dtx}{post,etexcmds}% + \from{etexcmds.dtx}{package}% + \from{hobsub.dtx}{post,kvsetkeys}% + \from{kvsetkeys.dtx}{package}% + \from{hobsub.dtx}{post,kvdefinekeys}% + \from{kvdefinekeys.dtx}{package}% + \from{hobsub.dtx}{post,luatex-loader}% + \from{luatex.dtx}{loader}% + \from{hobsub.dtx}{post,pdftexcmds}% + \from{pdftexcmds.dtx}{package}% + \from{hobsub.dtx}{post,pdfescape}% + \from{pdfescape.dtx}{package}% + \from{hobsub.dtx}{post,bigintcalc}% + \from{bigintcalc.dtx}{package}% + \from{hobsub.dtx}{post,bitset}% + \from{bitset.dtx}{package}% + \from{hobsub.dtx}{post,uniquecounter}% + \from{uniquecounter.dtx}{package}% + \from{hobsub.dtx}{post,atend}% + }% +} +\generate{% + \usedir{tex/generic/oberdiek}% + \file{hobsub-hyperref.sty}{% + \from{hobsub.dtx}{hyperref,preamble,,letltxmacro}% + \from{letltxmacro.dtx}{package}% + \from{hobsub.dtx}{post,hopatch}% + \from{hopatch.dtx}{package}% + \from{hobsub.dtx}{post,xcolor-patch}% + \from{hycolor.dtx}{xcolor}% + \from{hobsub.dtx}{post,atveryend}% + \from{atveryend.dtx}{package}% + \from{hobsub.dtx}{post,atbegshi}% + \from{atbegshi.dtx}{package}% + \from{hobsub.dtx}{post,refcount}% + \from{refcount.dtx}{package}% + \from{hobsub.dtx}{post,hycolor}% + \from{hycolor.dtx}{package}% + \from{hobsub.dtx}{post}% + }% +} + +\catcode32=13\relax% active space +\let =\space% +\Msg{************************************************************************} +\Msg{*} +\Msg{* To finish the installation you have to move the following} +\Msg{* files into a directory searched by TeX:} +\Msg{*} +\Msg{* hobsub.sty, hobsub-generic.sty, hobsub-hyperref.sty} +\Msg{*} +\Msg{* And install the following script file:} +\Msg{*} +\Msg{* } +\Msg{*} +\Msg{* To produce the documentation run the file `hobsub.drv'} +\Msg{* through LaTeX.} +\Msg{*} +\Msg{* Happy TeXing!} +\Msg{*} +\Msg{************************************************************************} + +\endbatchfile +%</install> +%<*ignore> +\fi +%</ignore> +%<*driver> +\NeedsTeXFormat{LaTeX2e} +\ProvidesFile{hobsub.drv}% + [2011/01/30 v1.0 Subsetting bundle oberdiek (HO)]% +\documentclass{ltxdoc} +\usepackage{holtxdoc}[2008/08/11] +\usepackage{array} +\usepackage{caption} +\renewcommand*{\bottomfraction}{.5} +\renewcommand*{\topfraction}{.5} +\begin{document} + \DocInput{hobsub.dtx}% +\end{document} +%</driver> +% \fi +% +% \CheckSum{763} +% +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} +% +% \GetFileInfo{hobsub.drv} +% +% \title{The \xpackage{hobsub} package} +% \date{2011/01/30 v1.0} +% \author{Heiko Oberdiek\\\xemail{heiko.oberdiek at googlemail.com}} +% +% \maketitle +% +% \begin{abstract} +% Package \xpackage{hobsub} implements the idea of loading +% several packages in one big collection package. +% \end{abstract} +% +% \tableofcontents +% +% \def\TableGeneric{^^A +% \TableEntry{\xpackage{infwarerr}}{}{2010/04/08 v1.3}^^A +% \TableEntry{\xpackage{ltxcmds}}{}{2011/03/16 v1.18}^^A +% \TableEntry{\xpackage{ifluatex}}{}{2010/03/01 v1.3}^^A +% \TableEntry{\xpackage{ifvtex}}{}{2010/03/01 v1.5}^^A +% \TableEntry{\xpackage{intcalc}}{}{2007/09/27 v1.1}^^A +% \TableEntry{\xpackage{ifpdf}}{\xpackage{ifluatex}}{2011/01/30 v2.3}^^A +% \TableEntry{\xpackage{etexcmds}}{}{2011/02/16 v1.5}^^A +% \TableEntry{\xpackage{kvsetkeys}}{}{2011/04/07 v1.13}^^A +% \TableEntry{\xpackage{kvdefinekeys}}{}{2011/04/07 v1.3}^^A +% \TableEntry{\xpackage{luatex-loader}}{}{2010/03/09 v0.4}^^A +% \TableEntry{\xpackage{pdftexcmds}}{\xpackage{ifluatex}, \xpackage{ifpdf}, \xpackage{infwarerr}, \xpackage{ltxcmds}, \xpackage{luatex-loader}}{2011/04/10 v0.14}^^A +% \TableEntry{\xpackage{pdfescape}}{\xpackage{ltxcmds}, \xpackage{pdftexcmds}}{2011/04/04 v1.12}^^A +% \TableEntry{\xpackage{bigintcalc}}{\xpackage{pdftexcmds}}{2011/01/30 v1.2}^^A +% \TableEntry{\xpackage{bitset}}{\xpackage{bigintcalc}, \xpackage{infwarerr}, \xpackage{intcalc}}{2011/01/30 v1.1}^^A +% \TableEntry{\xpackage{uniquecounter}}{\xpackage{bigintcalc}, \xpackage{infwarerr}}{2011/01/30 v1.2}^^A +% } +% \def\TableHyperref{^^A +% \TableEntry{\xpackage{letltxmacro}}{}{2010/09/02 v1.4}^^A +% \TableEntry{\xpackage{hopatch}}{}{2011/01/30 v1.0}^^A +% \TableEntry{\xpackage{xcolor-patch}}{}{2011/01/30 v1.7}^^A +% \TableEntry{\xpackage{atveryend}}{}{2010/03/24 v1.5}^^A +% \TableEntry{\xpackage{atbegshi}}{\xpackage{ifpdf}, \xpackage{infwarerr}, \xpackage{ltxcmds}}{2011/01/30 v1.15}^^A +% \TableEntry{\xpackage{refcount}}{\xpackage{infwarerr}, \xpackage{ltxcmds}}{2010/12/01 v3.2}^^A +% \TableEntry{\xpackage{hycolor}}{\xpackage{xcolor-patch}}{2011/01/30 v1.7}^^A +% } +% +% \newenvironment{TableList}[2][htbp]{^^A +% \begin{table}[{#1}]^^A +% \centering +% \caption{Overview \xpackage{hobsub-#2}}^^A +% \label{tab:#2}^^A +% \begin{tabular}{ll>{\raggedright}p{.4\linewidth}}^^A +% \bfseries Package & \bfseries Release & +% \bfseries Dependencies\tabularnewline +% \hline +% }{^^A +% \end{tabular}^^A +% \end{table}^^A +% } +% \newcommand*{\TableEntry}[3]{% +% #1\tabularnewline +% } +% +% \renewcommand*{\arraystretch}{1.1} +% \setlength{\extrarowheight}{2pt} +% +% \section{Documentation} +% +% In January 2011 the mailing list lualatex-dev discussed +% ``quietening lualatex console output'' \cite{lualatex:quiet}. +% Inspired from this, I implemented this package \xpackage{hobsub} +% to load several packages in one file. The package is applied for +% two packages collections that are subsets of my package bundle +% \xpackage{oberdiek}. +% \begin{description} +% \item[\xpackage{hobsub-generic}] is a collection of packages +% that can also be used with \hologo{plainTeX}. +% \item[\xpackage{hobsub-hyperref}] is a collection of packages +% that is used by package \xpackage{hyperref}. +% \end{description} +% +% Package \xpackage{hobsub} provides the macros that +% are used in the collection packages and might be used +% in other projects as well. But there are many caveats, +% some of them are discussed below. +% +% The most serious problem is consistency. A package +% that is available as standalone package and is part +% of a collection might have different versions. +% Because my packages are organized in a bundle and should +% be installed and updated as bundle, the risk seems low +% to me. However, if a single package is updated manually, for +% example for testing, then it should be loaded before the +% collection that contains the package with an older version. +% In a collection, the package will not be loaded again if it +% is already loaded. +% +% \subsection{Usage} +% +% The collection packages \xpackage{hobsub-generic} and +% \xpackage{hobsub-hyperref} are loaded as usual: +% \begin{quote} +% \begin{tabular}{@{}ll@{}} +% |\usepackage{hobsub-generic}| & \hologo{LaTeX}\\ +% |\input hobsub-generic.sty| & \hologo{plainTeX} +% \end{tabular} +% \end{quote} +% or +% \begin{quote}|\usepackage{hobsub-hyperref}|\end{quote} +% Of course, both \cs{usepackage} or \cs{RequirePackage} +% can be used. +% +% If you need requirements on the version date of a package +% inside a collection, then specify them afterwards, for +% example: +% \begin{quote} +% |\usepackage{hobsub-generic}|\\ +% |\usepackage{ltxcmds}[2010/12/04]% |^^A +% {\itshape |\ltx@ifblank is needed|} +% \end{quote} +% +% Also it is not garanteed that a package will be always +% part of a collection. Therefore it does not harm, +% to make the requirements explicite \emph{after} +% a collection is loaded, see the previous example. +% \hologo{LaTeX} knows that a +% package is already loaded and does not load it again. +% +% \subsection{Supported features} +% +% \begin{description} +% \item[No reloads:] If a package is already loaded then it +% is not reloaded again if it is part of a collection package. +% \item[\cs{listfiles}:] +% Each package that is loaded in a collection is also +% added to the output of \cs{listfiles}. +% \item[\cs{@currname}, \cs{@currext}] +% are updated, they are used by \hologo{LaTeX}'s +% \cs{ProvidesPackage}. +% \item[\cs{AtEndOfPackage}:] +% \hologo{LaTeX}'s hook mechanism that is used for +% \cs{AtEndOfPackage} is supported. However none of the +% packages in the collections are using \cs{AtEndOfPackage}, +% therefore this feature is completely untested. +% \end{description} +% +% \subsection{Common limitations} +% +% \begin{description} +% \item[\cs{endinput}:] +% Often a package is using \cs{endinput}, either added by +% \xpackage{docstrip}, or to stop package loading at an earlier +% time. Therefore \cs{endinput} must be catched during package +% loading to prevent that the collection package is closed +% too early before reading all packages it contains. +% +% This redefinition of \cs{endinput} fails if the package loads +% other files that contain \cs{endinput}. To some degree it could +% be catched by redefining macros that load files. But this will +% not work for the primitive \cs{input}. +% \item[Options:] +% \hologo{LaTeX}'s package options are not supported. +% Therefore the packages that are put in a collection must +% not support options. +% \item[Hook packages:] +% Some packages and classes provides hooks for packages, see +% packages \xpackage{scrlfile}, \xpackage{filehook} +% or class \xclass{memoir}. These hooks are not supported +% for embedded packages inside a collection package. +% Because of the problem with \cs{endinput}, these hooks +% are not supported. The hooks might contain code that +% loads other files that execute \cs{endinput}. +% \end{description} +% +% \subsection{Package \xpackage{hobsub-generic}} +% +% \begin{TableList}[bp]{generic}\TableGeneric\end{TableList} +% +% Collection `generic' contains some of the \hologo{plainTeX} compatible +% packages of my bundle, see table \ref{tab:generic}. +% It adds the following restrictions to any package +% that is part of this collection: +% \begin{description} +% \item[Generic formats:] The following formats must be supported: +% \hologo{LaTeX}, \hologo{plainTeX} and even \hologo{iniTeX}. +% This applies to the collection package \xpackage{hobsub-generic} +% the same way. +% \item[Prefixed macros:] +% Any package of this collection should only define macros with +% prefixed names to avoid name clashes. Resources like registers +% must not be allocated and other global states should not be +% changed except for added macro definitions. +% \end{description} +% Thus the package \xpackage{hobsub-generic} can also preloaded +% in the format file with \hologo{iniTeX}. +% +% \subsection{Package \xpackage{hobsub-hyperref}} +% +% \begin{TableList}[tp]{hyperref}\TableHyperref\end{TableList} +% +% Collection `hyperref' contains additional packages that are +% used by package \xpackage{hyperref} and that does not fit +% in collection `generic', see table{tab:hyperref}. +% The latter collection package +% \xpackage{hobsub-generic} is loaded via a conventional +% \cs{RequirePackage}. +% +% Because most of the packages in the collection `hyperref' +% needs \hologo{LaTeX}, the collection requires \hologo{LaTeX}. +% +% \subsection{Package \xpackage{hobsub}} +% +% This section is for advanced users that might want to +% build a collection package. Then it can be done by +% using \xpackage{hobsub}: +% \begin{quote} +% \dots\\ +% |\RequirePackage{hobsub}[2011/01/30]|\\ +% \dots\\ +% |\hobsub@StartPackage{foo1}|\\ +% \textit{\dots\unskip\ package code of \xfile{foo1.sty} \dots}\\ +% |\endinput|\\ +% |<hobsub>|\\ +% |\hobsub@StopPackage|\\ +% |\hobsub@StartPackage{bar2}|\\ +% \textit{\dots\unskip\ package code of \xfile{bar2.sty} \dots}\\ +% |\endinput|\\ +% |<hobsub>|\\ +% |\hobsub@StopPackage| +% \dots +% \end{quote} +% But be aware of the caveats and limitations, see above. +% Only quite a small portion of the packages can be embedded +% like this. +% +% \clearpage +% +% \StopEventually{ +% } +% +% \section{Implementation} +% +% \subsection{Reload check and package identification} +% +% \subsubsection{Package \xpackage{hobsub}} +% +% \begin{macrocode} +%<*package> +% \end{macrocode} +% Reload check, especially if the package is not used with \LaTeX. +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode58=12 % : + \catcode64=11 % @ + \catcode123=1 % { + \catcode125=2 % } + \expandafter\let\expandafter\x\csname ver@hobsub.sty\endcsname + \ifx\x\relax % plain-TeX, first loading + \else + \def\empty{}% + \ifx\x\empty % LaTeX, first loading, + % variable is initialized, but \ProvidesPackage not yet seen + \else + \expandafter\ifx\csname PackageInfo\endcsname\relax + \def\x#1#2{% + \immediate\write-1{Package #1 Info: #2.}% + }% + \else + \def\x#1#2{\PackageInfo{#1}{#2, stopped}}% + \fi + \x{hobsub}{The package is already loaded}% + \aftergroup\endinput + \fi + \fi +\endgroup% +% \end{macrocode} +% Package identification: +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode40=12 % ( + \catcode41=12 % ) + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode47=12 % / + \catcode58=12 % : + \catcode64=11 % @ + \catcode91=12 % [ + \catcode93=12 % ] + \catcode123=1 % { + \catcode125=2 % } + \expandafter\ifx\csname ProvidesPackage\endcsname\relax + \def\x#1#2#3[#4]{\endgroup + \immediate\write-1{Package: #3 #4}% + \xdef#1{#4}% + }% + \else + \def\x#1#2[#3]{\endgroup + #2[{#3}]% + \ifx#1\@undefined + \xdef#1{#3}% + \fi + \ifx#1\relax + \xdef#1{#3}% + \fi + }% + \fi +\expandafter\x\csname ver@hobsub.sty\endcsname +\ProvidesPackage{hobsub}% + [2011/01/30 v1.0 Subsetting bundle oberdiek (HO)]% +% \end{macrocode} +% \begin{macrocode} +%</package> +% \end{macrocode} +% +% \subsubsection{Package \xpackage{hobsub-generic}} +% +% \begin{macrocode} +%<*generic> +% \end{macrocode} +% Reload check, especially if the package is not used with \LaTeX. +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode58=12 % : + \catcode64=11 % @ + \catcode123=1 % { + \catcode125=2 % } + \expandafter\let\expandafter\x\csname ver@hobsub-generic.sty\endcsname + \ifx\x\relax % plain-TeX, first loading + \else + \def\empty{}% + \ifx\x\empty % LaTeX, first loading, + % variable is initialized, but \ProvidesPackage not yet seen + \else + \expandafter\ifx\csname PackageInfo\endcsname\relax + \def\x#1#2{% + \immediate\write-1{Package #1 Info: #2.}% + }% + \else + \def\x#1#2{\PackageInfo{#1}{#2, stopped}}% + \fi + \x{hobsub-generic}{The package is already loaded}% + \aftergroup\endinput + \fi + \fi +\endgroup% +% \end{macrocode} +% Package identification: +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode40=12 % ( + \catcode41=12 % ) + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode47=12 % / + \catcode58=12 % : + \catcode64=11 % @ + \catcode91=12 % [ + \catcode93=12 % ] + \catcode123=1 % { + \catcode125=2 % } + \expandafter\ifx\csname ProvidesPackage\endcsname\relax + \def\x#1#2#3[#4]{\endgroup + \immediate\write-1{Package: #3 #4}% + \xdef#1{#4}% + }% + \else + \def\x#1#2[#3]{\endgroup + #2[{#3}]% + \ifx#1\@undefined + \xdef#1{#3}% + \fi + \ifx#1\relax + \xdef#1{#3}% + \fi + }% + \fi +\expandafter\x\csname ver@hobsub-generic.sty\endcsname +\ProvidesPackage{hobsub-generic}% + [2011/01/30 v1.0 Bundle oberdiek, subset generic (HO)]% +% \end{macrocode} +% \begin{macrocode} +%</generic> +% \end{macrocode} +% +% \subsubsection{Package \xpackage{hobsub-hyperref}} +% +% \begin{macrocode} +%<*hyperref> +% \end{macrocode} +% Reload check, especially if the package is not used with \LaTeX. +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode58=12 % : + \catcode64=11 % @ + \catcode123=1 % { + \catcode125=2 % } + \expandafter\let\expandafter\x\csname ver@hobsub-hyperref.sty\endcsname + \ifx\x\relax % plain-TeX, first loading + \else + \def\empty{}% + \ifx\x\empty % LaTeX, first loading, + % variable is initialized, but \ProvidesPackage not yet seen + \else + \expandafter\ifx\csname PackageInfo\endcsname\relax + \def\x#1#2{% + \immediate\write-1{Package #1 Info: #2.}% + }% + \else + \def\x#1#2{\PackageInfo{#1}{#2, stopped}}% + \fi + \x{hobsub-hyperref}{The package is already loaded}% + \aftergroup\endinput + \fi + \fi +\endgroup% +% \end{macrocode} +% Package identification: +% \begin{macrocode} +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode35=6 % # + \catcode39=12 % ' + \catcode40=12 % ( + \catcode41=12 % ) + \catcode44=12 % , + \catcode45=12 % - + \catcode46=12 % . + \catcode47=12 % / + \catcode58=12 % : + \catcode64=11 % @ + \catcode91=12 % [ + \catcode93=12 % ] + \catcode123=1 % { + \catcode125=2 % } + \expandafter\ifx\csname ProvidesPackage\endcsname\relax + \def\x#1#2#3[#4]{\endgroup + \immediate\write-1{Package: #3 #4}% + \xdef#1{#4}% + }% + \else + \def\x#1#2[#3]{\endgroup + #2[{#3}]% + \ifx#1\@undefined + \xdef#1{#3}% + \fi + \ifx#1\relax + \xdef#1{#3}% + \fi + }% + \fi +\expandafter\x\csname ver@hobsub-hyperref.sty\endcsname +\ProvidesPackage{hobsub-hyperref}% + [2011/01/30 v1.0 Bundle oberdiek, subset hyperref (HO)]% +% \end{macrocode} +% \begin{macrocode} +%</hyperref> +% \end{macrocode} +% +% \subsection{Catcodes} +% +% \begin{macrocode} +%<*package|generic|hyperref> +\begingroup\catcode61\catcode48\catcode32=10\relax% + \catcode13=5 % ^^M + \endlinechar=13 % + \catcode123=1 % { + \catcode125=2 % } + \catcode64=11 % @ + \def\x{\endgroup + \expandafter\edef\csname HOBsub@AtEnd\endcsname{% + \endlinechar=\the\endlinechar\relax + \catcode13=\the\catcode13\relax + \catcode32=\the\catcode32\relax + \catcode35=\the\catcode35\relax + \catcode61=\the\catcode61\relax + \catcode64=\the\catcode64\relax + \catcode123=\the\catcode123\relax + \catcode125=\the\catcode125\relax + }% + }% +\x\catcode61\catcode48\catcode32=10\relax% +\catcode13=5 % ^^M +\endlinechar=13 % +\catcode35=6 % # +\catcode64=11 % @ +\catcode123=1 % { +\catcode125=2 % } +\def\TMP@EnsureCode#1#2{% + \edef\HOBsub@AtEnd{% + \HOBsub@AtEnd + \catcode#1=\the\catcode#1\relax + }% + \catcode#1=#2\relax +} +\TMP@EnsureCode{39}{12}% ' +\TMP@EnsureCode{40}{12}% ( +\TMP@EnsureCode{41}{12}% ) +\TMP@EnsureCode{45}{12}% - +\TMP@EnsureCode{46}{12}% . +\TMP@EnsureCode{47}{12}% / +\TMP@EnsureCode{58}{12}% : +\TMP@EnsureCode{60}{12}% < +\TMP@EnsureCode{62}{12}% > +\TMP@EnsureCode{96}{12}% ` +\edef\HOBsub@AtEnd{\HOBsub@AtEnd\noexpand\endinput} +% \end{macrocode} +% +% \begin{macrocode} +%</package|generic|hyperref> +% \end{macrocode} +% +% \subsection{Package \xpackage{hobsub-hyperref} loads \xpackage{hobsub-generic}} +% +% \begin{macrocode} +%<*hyperref> +\NeedsTeXFormat{LaTeX2e} +\RequirePackage{hobsub-generic}[2011/01/30] +%</hyperref> +% \end{macrocode} +% +% \subsection{Preamble} +% +% \begin{macrocode} +%<*preamble> +\begingroup\expandafter\expandafter\expandafter\endgroup +\expandafter\ifx\csname ver@hobsub.sty\endcsname\relax +\else + \expandafter\hobsub@GobbleRemainingPackage +\fi +%</preamble> +% \end{macrocode} +% +% +% \begin{macrocode} +%<*package|preamble> +% \end{macrocode} +% +% \begin{macro}{\HOBsub@OrgEndinput} +% \begin{macrocode} +\begingroup\expandafter\expandafter\expandafter\endgroup +\expandafter\ifx\csname HOBsub@OrgEndinput\endcsname\relax + \let\HOBsub@OrgEndinput\endinput +\fi +% \end{macrocode} +% \end{macro} +% \begin{macro}{\hobsub@GobbleRemainingPackage} +% \begin{macrocode} +\def\hobsub@GobbleRemainingPackage{% + \begingroup + \catcode92=14 % backslash: comment + \catcode32=14 % space: comment + \catcode123=14 % left brace: comment + \catcode125=14 % right brace: comment + \catcode60=3 % less: math + \catcode62=4 % greater: align + \endlinechar=-1 % + \HOBsub@GobbleRemainingPackage +} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\HOBsub@GobbleRemainingPackage} +% \begin{macrocode} +\catcode60=3 % less: dollar +\catcode62=4 % greater: align +\long\def\HOBsub@GobbleRemainingPackage#1<hobsub>{% + \endgroup +} +\catcode60=12 % less: other +\catcode62=12 % greater: other +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\hobsub@StartPackage} +% \begin{macrocode} +\def\hobsub@StartPackage#1{% + \begingroup\expandafter\expandafter\expandafter\endgroup + \expandafter\ifx\csname ver@#1.sty\endcsname\relax + \let\HOBsub@OrgCurrName\@currname + \let\HOBsub@OrgCurrExt\@currext + \csname @pushfilename\endcsname + \def\@currname{#1}% + \def\@currext{sty}% + \expandafter\def\csname\@currname.\@currext-h@@k\endcsname{}% + \let\endinput\hobsub@GobbleRemainingPackage + \def\hobsub@StopPackage{% + \let\hobsub@StopPackage\relax + \HOBsub@StopPackage +% \hobsub@Info{hobsub}{Package `#1' loaded}% + }% + \hobsub@AddToFileList{#1.sty}% + \else + \hobsub@Info{hobsub}{Skipping package `#1' (already loaded)}% + \let\hobsub@StopPackage\relax + \expandafter\hobsub@GobbleRemainingPackage + \fi +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\hobsub@StopPackage} +% \begin{macrocode} +\let\hobsub@StopPackage\relax +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\hobsub@Info} +% \begin{macrocode} +\def\hobsub@Info#1#2{% + \begingroup\expandafter\expandafter\expandafter\endgroup + \expandafter\ifx\csname @PackageInfoNoLine\endcsname\relax + \immediate\write-1{Package #1 Info: #2.}% + \else + \let\hobsub@Info\@PackageInfoNoLine + \hobsub@Info{#1}{#2}% + \fi +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\HOBsub@StopPackage} +% \begin{macrocode} +\def\HOBsub@StopPackage{% + \csname\@currname.\@currext-h@@k\endcsname + \let\endinput\HOBsub@OrgEndinput + \csname @popfilename\endcsname + \let\@currname\HOBsub@OrgCurrName + \let\@currext\HOBsub@OrgCurrExt +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\hobsub@AddToFileList} +% \begin{macrocode} +\begingroup\expandafter\expandafter\expandafter\endgroup +\expandafter\ifx\csname @addtofilelist\endcsname\relax + \def\hobsub@AddToFileList#1{}% +\else + \def\hobsub@AddToFileList#1{% + \@addtofilelist{#1}% + }% +\fi +% \end{macrocode} +% \end{macro} +% +% \begin{macrocode} +%</package|preamble> +% \end{macrocode} +% +% \subsection{End of preamble for subset packages} +% +% Add the end marker for possible skipping of previous +% macros, if package \xpackage{hobsub} was already loaded. +% \begin{macrocode} +%<*preamble> +\hobsub@GobbleRemainingPackage +<hobsub> +% \end{macrocode} +% +% All macros of package \xpackage{hobsub} are now available. +% Now we officially load the package \xpackage{hobsub} inline +% for proper package identification. +% \begin{macrocode} +\hobsub@StartPackage{hobsub}% +\begingroup\expandafter\expandafter\expandafter\endgroup +\expandafter\ifx\csname ProvidesPackage\endcsname\relax + \immediate\write-1{% + Package: hobsub 2011/01/30 v1.0 Subsetting bundle oberdiek (HO)% + }% +\else + \ProvidesPackage{hobsub}% + [2011/01/30 v1.0 Subsetting bundle oberdiek (HO)]% +\fi +%</preamble> +% \end{macrocode} +% +% +% \begin{macrocode} +%<*post|preamble> + \endinput +<hobsub> +\hobsub@StopPackage +%</post|preamble> +% \end{macrocode} +% +% \subsection{Package list} +% +% \begin{macrocode} +%<infwarerr>\hobsub@StartPackage{infwarerr} +%<ltxcmds>\hobsub@StartPackage{ltxcmds} +%<ifluatex>\hobsub@StartPackage{ifluatex} +%<ifvtex>\hobsub@StartPackage{ifvtex} +%<intcalc>\hobsub@StartPackage{intcalc} +%<ifpdf>\hobsub@StartPackage{ifpdf} +%<etexcmds>\hobsub@StartPackage{etexcmds} +%<kvsetkeys>\hobsub@StartPackage{kvsetkeys} +%<kvdefinekeys>\hobsub@StartPackage{kvdefinekeys} +%<*luatex-loader> +\ifluatex +\else + \expandafter\hobsub@GobbleRemainingPackage +\fi +\hobsub@StartPackage{luatex-loader} +%</luatex-loader> +%<pdftexcmds>\hobsub@StartPackage{pdftexcmds} +%<pdfescape>\hobsub@StartPackage{pdfescape} +%<bigintcalc>\hobsub@StartPackage{bigintcalc} +%<bitset>\hobsub@StartPackage{bitset} +%<uniquecounter>\hobsub@StartPackage{uniquecounter} +%<letltxmacro>\hobsub@StartPackage{letltxmacro} +%<hopatch>\hobsub@StartPackage{hopatch} +%<xcolor-patch>\hobsub@StartPackage{xcolor-patch} +%<atveryend>\hobsub@StartPackage{atveryend} +%<atbegshi>\hobsub@StartPackage{atbegshi} +%<refcount>\hobsub@StartPackage{refcount} +%<hycolor>\hobsub@StartPackage{hycolor} +% \end{macrocode} +% +% \subsection{End of packages} +% +% \begin{macrocode} +%<package|atend>\HOBsub@AtEnd% +% \end{macrocode} +% +% \section{Test} +% +% \subsection{Catcode checks for loading} +% +% \begin{macrocode} +%<*test1> +% \end{macrocode} +% \begin{macrocode} +\catcode`\{=1 % +\catcode`\}=2 % +\catcode`\#=6 % +\catcode`\@=11 % +\expandafter\ifx\csname count@\endcsname\relax + \countdef\count@=255 % +\fi +\expandafter\ifx\csname @gobble\endcsname\relax + \long\def\@gobble#1{}% +\fi +\expandafter\ifx\csname @firstofone\endcsname\relax + \long\def\@firstofone#1{#1}% +\fi +\expandafter\ifx\csname loop\endcsname\relax + \expandafter\@firstofone +\else + \expandafter\@gobble +\fi +{% + \def\loop#1\repeat{% + \def\body{#1}% + \iterate + }% + \def\iterate{% + \body + \let\next\iterate + \else + \let\next\relax + \fi + \next + }% + \let\repeat=\fi +}% +\def\RestoreCatcodes{} +\count@=0 % +\loop + \edef\RestoreCatcodes{% + \RestoreCatcodes + \catcode\the\count@=\the\catcode\count@\relax + }% +\ifnum\count@<255 % + \advance\count@ 1 % +\repeat + +\def\RangeCatcodeInvalid#1#2{% + \count@=#1\relax + \loop + \catcode\count@=15 % + \ifnum\count@<#2\relax + \advance\count@ 1 % + \repeat +} +\def\RangeCatcodeCheck#1#2#3{% + \count@=#1\relax + \loop + \ifnum#3=\catcode\count@ + \else + \errmessage{% + Character \the\count@\space + with wrong catcode \the\catcode\count@\space + instead of \number#3% + }% + \fi + \ifnum\count@<#2\relax + \advance\count@ 1 % + \repeat +} +\def\space{ } +\expandafter\ifx\csname LoadCommand\endcsname\relax + \def\LoadCommand{\input hobsub.sty\relax}% +\fi +\def\Test{% + \RangeCatcodeInvalid{0}{47}% + \RangeCatcodeInvalid{58}{64}% + \RangeCatcodeInvalid{91}{96}% + \RangeCatcodeInvalid{123}{255}% + \catcode`\@=12 % + \catcode`\\=0 % + \catcode`\%=14 % + \LoadCommand + \RangeCatcodeCheck{0}{36}{15}% + \RangeCatcodeCheck{37}{37}{14}% + \RangeCatcodeCheck{38}{47}{15}% + \RangeCatcodeCheck{48}{57}{12}% + \RangeCatcodeCheck{58}{63}{15}% + \RangeCatcodeCheck{64}{64}{12}% + \RangeCatcodeCheck{65}{90}{11}% + \RangeCatcodeCheck{91}{91}{15}% + \RangeCatcodeCheck{92}{92}{0}% + \RangeCatcodeCheck{93}{96}{15}% + \RangeCatcodeCheck{97}{122}{11}% + \RangeCatcodeCheck{123}{255}{15}% + \RestoreCatcodes +} +\Test +\csname @@end\endcsname +\end +% \end{macrocode} +% \begin{macrocode} +%</test1> +% \end{macrocode} +% +% \section{Installation} +% +% \subsection{Download} +% +% \paragraph{Package.} This package is available on +% CTAN\footnote{\url{ftp://ftp.ctan.org/tex-archive/}}: +% \begin{description} +% \item[\CTAN{macros/latex/contrib/oberdiek/hobsub.dtx}] The source file. +% \item[\CTAN{macros/latex/contrib/oberdiek/hobsub.pdf}] Documentation. +% \end{description} +% +% +% \paragraph{Bundle.} All the packages of the bundle `oberdiek' +% are also available in a TDS compliant ZIP archive. There +% the packages are already unpacked and the documentation files +% are generated. The files and directories obey the TDS standard. +% \begin{description} +% \item[\CTAN{install/macros/latex/contrib/oberdiek.tds.zip}] +% \end{description} +% \emph{TDS} refers to the standard ``A Directory Structure +% for \TeX\ Files'' (\CTAN{tds/tds.pdf}). Directories +% with \xfile{texmf} in their name are usually organized this way. +% +% \subsection{Bundle installation} +% +% \paragraph{Unpacking.} Unpack the \xfile{oberdiek.tds.zip} in the +% TDS tree (also known as \xfile{texmf} tree) of your choice. +% Example (linux): +% \begin{quote} +% |unzip oberdiek.tds.zip -d ~/texmf| +% \end{quote} +% +% \paragraph{Script installation.} +% Check the directory \xfile{TDS:scripts/oberdiek/} for +% scripts that need further installation steps. +% Package \xpackage{attachfile2} comes with the Perl script +% \xfile{pdfatfi.pl} that should be installed in such a way +% that it can be called as \texttt{pdfatfi}. +% Example (linux): +% \begin{quote} +% |chmod +x scripts/oberdiek/pdfatfi.pl|\\ +% |cp scripts/oberdiek/pdfatfi.pl /usr/local/bin/| +% \end{quote} +% +% \subsection{Package installation} +% +% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting +% \docstrip\ archive. The files are extracted by running the +% \xfile{.dtx} through \plainTeX: +% \begin{quote} +% \verb|tex hobsub.dtx| +% \end{quote} +% +% \paragraph{TDS.} Now the different files must be moved into +% the different directories in your installation TDS tree +% (also known as \xfile{texmf} tree): +% \begin{quote} +% \def\t{^^A +% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}} +% hobsub.sty & tex/generic/oberdiek/hobsub.sty\\ +% hobsub-generic.sty & tex/generic/oberdiek/hobsub-generic.sty\\ +% hobsub-hyperref.sty & tex/generic/oberdiek/hobsub-hyperref.sty\\ +% hobsub.pdf & doc/latex/oberdiek/hobsub.pdf\\ +% test/hobsub-test1.tex & doc/latex/oberdiek/test/hobsub-test1.tex\\ +% hobsub.dtx & source/latex/oberdiek/hobsub.dtx\\ +% \end{tabular}^^A +% }^^A +% \sbox0{\t}^^A +% \ifdim\wd0>\linewidth +% \begingroup +% \advance\linewidth by\leftmargin +% \advance\linewidth by\rightmargin +% \edef\x{\endgroup +% \def\noexpand\lw{\the\linewidth}^^A +% }\x +% \def\lwbox{^^A +% \leavevmode +% \hbox to \linewidth{^^A +% \kern-\leftmargin\relax +% \hss +% \usebox0 +% \hss +% \kern-\rightmargin\relax +% }^^A +% }^^A +% \ifdim\wd0>\lw +% \sbox0{\small\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\footnotesize\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\scriptsize\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\tiny\t}^^A +% \ifdim\wd0>\linewidth +% \lwbox +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \end{quote} +% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's +% TDS installing feature, then some files can already be in the right +% place, see the documentation of \docstrip. +% +% \subsection{Refresh file name databases} +% +% If your \TeX~distribution +% (\teTeX, \mikTeX, \dots) relies on file name databases, you must refresh +% these. For example, \teTeX\ users run \verb|texhash| or +% \verb|mktexlsr|. +% +% \subsection{Some details for the interested} +% +% \paragraph{Attached source.} +% +% The PDF documentation on CTAN also includes the +% \xfile{.dtx} source file. It can be extracted by +% AcrobatReader 6 or higher. Another option is \textsf{pdftk}, +% e.g. unpack the file into the current directory: +% \begin{quote} +% \verb|pdftk hobsub.pdf unpack_files output .| +% \end{quote} +% +% \paragraph{Unpacking with \LaTeX.} +% The \xfile{.dtx} chooses its action depending on the format: +% \begin{description} +% \item[\plainTeX:] Run \docstrip\ and extract the files. +% \item[\LaTeX:] Generate the documentation. +% \end{description} +% If you insist on using \LaTeX\ for \docstrip\ (really, +% \docstrip\ does not need \LaTeX), then inform the autodetect routine +% about your intention: +% \begin{quote} +% \verb|latex \let\install=y\input{hobsub.dtx}| +% \end{quote} +% Do not forget to quote the argument according to the demands +% of your shell. +% +% \paragraph{Generating the documentation.} +% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate +% the documentation. The process can be configured by the +% configuration file \xfile{ltxdoc.cfg}. For instance, put this +% line into this file, if you want to have A4 as paper format: +% \begin{quote} +% \verb|\PassOptionsToClass{a4paper}{article}| +% \end{quote} +% An example follows how to generate the +% documentation with pdf\LaTeX: +% \begin{quote} +%\begin{verbatim} +%pdflatex hobsub.dtx +%makeindex -s gind.ist hobsub.idx +%pdflatex hobsub.dtx +%makeindex -s gind.ist hobsub.idx +%pdflatex hobsub.dtx +%\end{verbatim} +% \end{quote} +% +% \begin{thebibliography}{9} +% \raggedright +% \bibitem{lualatex:quiet} +% Will Robertson, +% \textit{[lltx] quietening lualatex console output}; +% mailing list \textsf{lualatex-dev at tug.org}, +% 2011-01-29; +% \url{http://tug.org/pipermail/lualatex-dev/2011-January/001031.html}. +% +% \end{thebibliography} +% +% \begin{History} +% \begin{Version}{2011/01/30 v1.0} +% \item +% First public version. +% \end{Version} +% \end{History} +% +% \PrintIndex +% +% \Finale +\endinput |