diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/oberdiek/epstopdf.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/oberdiek/epstopdf.dtx | 1602 |
1 files changed, 0 insertions, 1602 deletions
diff --git a/Master/texmf-dist/source/latex/oberdiek/epstopdf.dtx b/Master/texmf-dist/source/latex/oberdiek/epstopdf.dtx deleted file mode 100644 index be5938f44d4..00000000000 --- a/Master/texmf-dist/source/latex/oberdiek/epstopdf.dtx +++ /dev/null @@ -1,1602 +0,0 @@ -% \iffalse meta-comment -% -% File: epstopdf.dtx -% Version: 2016/05/15 v2.6 -% Info: Conversion with epstopdf on the fly -% -% Copyright (C) 2001, 2006-2010 by -% Heiko Oberdiek <heiko.oberdiek at googlemail.com> -% -% This work may be distributed and/or modified under the -% conditions of the LaTeX Project Public License, either -% version 1.3c of this license or (at your option) any later -% version. This version of this license is in -% https://www.latex-project.org/lppl/lppl-1-3c.txt -% and the latest version of this license is in -% https://www.latex-project.org/lppl.txt -% and version 1.3 or later is part of all distributions of -% LaTeX version 2005/12/01 or later. -% -% This work has the LPPL maintenance status "maintained". -% -% The Current Maintainers of this work are -% Heiko Oberdiek and the Oberdiek Package Support Group -% https://github.com/ho-tex/oberdiek/issues -% -% This work consists of the main source file epstopdf.dtx -% and the derived files -% epstopdf.sty, epstopdf.pdf, epstopdf.ins, epstopdf.drv, -% epstopdf-base.sty, epstopdf-test1.tex. -% -% Distribution: -% CTAN:macros/latex/contrib/oberdiek/epstopdf.dtx -% CTAN:macros/latex/contrib/oberdiek/epstopdf.pdf -% -% Unpacking: -% (a) If epstopdf.ins is present: -% tex epstopdf.ins -% (b) Without epstopdf.ins: -% tex epstopdf.dtx -% (c) If you insist on using LaTeX -% latex \let\install=y\input{epstopdf.dtx} -% (quote the arguments according to the demands of your shell) -% -% Documentation: -% (a) If epstopdf.drv is present: -% latex epstopdf.drv -% (b) Without epstopdf.drv: -% latex epstopdf.dtx; ... -% The class ltxdoc loads the configuration file ltxdoc.cfg -% if available. Here you can specify further options, e.g. -% use A4 as paper format: -% \PassOptionsToClass{a4paper}{article} -% -% Programm calls to get the documentation (example): -% pdflatex epstopdf.dtx -% makeindex -s gind.ist epstopdf.idx -% pdflatex epstopdf.dtx -% makeindex -s gind.ist epstopdf.idx -% pdflatex epstopdf.dtx -% -% Installation: -% TDS:tex/latex/oberdiek/epstopdf.sty -% TDS:tex/latex/oberdiek/epstopdf-base.sty -% TDS:doc/latex/oberdiek/epstopdf.pdf -% TDS:doc/latex/oberdiek/test/epstopdf-test1.tex -% TDS:source/latex/oberdiek/epstopdf.dtx -% -%<*ignore> -\begingroup - \catcode123=1 % - \catcode125=2 % - \def\x{LaTeX2e}% -\expandafter\endgroup -\ifcase 0\ifx\install y1\fi\expandafter - \ifx\csname processbatchFile\endcsname\relax\else1\fi - \ifx\fmtname\x\else 1\fi\relax -\else\csname fi\endcsname -%</ignore> -%<*install> -\input docstrip.tex -\Msg{************************************************************************} -\Msg{* Installation} -\Msg{* Package: epstopdf 2016/05/15 v2.6 Conversion with epstopdf on the fly (HO)} -\Msg{************************************************************************} - -\keepsilent -\askforoverwritefalse - -\let\MetaPrefix\relax -\preamble - -This is a generated file. - -Project: epstopdf -Version: 2016/05/15 v2.6 - -Copyright (C) 2001, 2006-2010 by - Heiko Oberdiek <heiko.oberdiek at googlemail.com> - -This work may be distributed and/or modified under the -conditions of the LaTeX Project Public License, either -version 1.3c of this license or (at your option) any later -version. This version of this license is in - https://www.latex-project.org/lppl/lppl-1-3c.txt -and the latest version of this license is in - https://www.latex-project.org/lppl.txt -and version 1.3 or later is part of all distributions of -LaTeX version 2005/12/01 or later. - -This work has the LPPL maintenance status "maintained". - -The Current Maintainers of this work are -Heiko Oberdiek and the Oberdiek Package Support Group -https://github.com/ho-tex/oberdiek/issues - - -This work consists of the main source file epstopdf.dtx -and the derived files - epstopdf.sty, epstopdf.pdf, epstopdf.ins, epstopdf.drv, - epstopdf-base.sty, epstopdf-test1.tex. - -\endpreamble -\let\MetaPrefix\DoubleperCent - -\generate{% - \file{epstopdf.ins}{\from{epstopdf.dtx}{install}}% - \file{epstopdf.drv}{\from{epstopdf.dtx}{driver}}% - \usedir{tex/latex/oberdiek}% - \file{epstopdf.sty}{\from{epstopdf.dtx}{package}}% - \file{epstopdf-base.sty}{\from{epstopdf.dtx}{base}}% -% \usedir{doc/latex/oberdiek/test}% -% \file{epstopdf-test1.tex}{\from{epstopdf.dtx}{test1}}% - \nopreamble - \nopostamble -% \usedir{source/latex/oberdiek/catalogue}% -% \file{epstopdf-pkg.xml}{\from{epstopdf.dtx}{catalogue}}% -} - -\catcode32=13\relax% active space -\let =\space% -\Msg{************************************************************************} -\Msg{*} -\Msg{* To finish the installation you have to move the following} -\Msg{* files into a directory searched by TeX:} -\Msg{*} -\Msg{* epstopdf.sty, epstopdf-base.sty} -\Msg{*} -\Msg{* To produce the documentation run the file `epstopdf.drv'} -\Msg{* through LaTeX.} -\Msg{*} -\Msg{* Happy TeXing!} -\Msg{*} -\Msg{************************************************************************} - -\endbatchfile -%</install> -%<*ignore> -\fi -%</ignore> -%<*driver> -\NeedsTeXFormat{LaTeX2e} -\ProvidesFile{epstopdf.drv}% - [2016/05/15 v2.6 Conversion with epstopdf on the fly (HO)]% -\documentclass{ltxdoc} -\usepackage{holtxdoc}[2011/11/22] -\begin{document} - \DocInput{epstopdf.dtx}% -\end{document} -%</driver> -% \fi -% -% -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} -% -% \GetFileInfo{epstopdf.drv} -% -% \title{The \xpackage{epstopdf} package} -% \date{2016/05/15 v2.6} -% \author{Heiko Oberdiek\thanks -% {Please report any issues at \url{https://github.com/ho-tex/oberdiek/issues}}} -% -% \maketitle -% -% \begin{abstract} -% This packages adds support of handling eps images -% to package \xpackage{graphics} or \xpackage{graphicx} -% with option \xoption{pdftex}. If an eps image is detected, -% epstopdf is automatically called to convert it to pdf format. -% \end{abstract} -% -% \tableofcontents -% -% \providecommand*{\xprogram}[1]{\textsf{#1}} -% -% \section{Documentation} -% -% \subsection{Introduction} -% -% \LaTeX\ provides its graphics bundle to include graphics files. -% Both packages \xpackage{graphics} or \xpackage{graphicx} may -% be used. the latter one loads the first and adds options -% in key value style for \cs{includegraphics}. -% -% Usually the drivers do not support all kind of graphics files. -% Other image types must be converted, before they become -% usuable. In case of driver \xprogram{dvips}, the graphics -% rule may contain a conversion rule. Then all that package -% \xpackage{graphics} must know is the bounding box, the command -% is passed to \xprogram{dvips} that calls it and embeds the -% converted image. -% -% However, \pdfTeX\ has its driver for PDF output already -% build in. It's graphics inclusion commands (\cs{pdfximage}) -% does not allow the execution of external commands. -% Therefore commands in the last argument of -% \cs{DeclareGraphicsRule} were of no use. -% But external programs can be called within \pdfTeX. -% This feature is called ``shell escape'' or ``write 18'' -% and must usually enabled explicitely because of security reasons. -% Now, this package \xpackage{epstopdf} hooks -% into package \xpackage{graphics}' code to catch -% that argument with the external command and executes it -% to convert the graphics file to a supported format and -% passes the control of graphics inclusion back to package -% \xpackage{graphics}. -% -% \subsection{Requirements} -% -% \begin{itemize} -% \item -% The feature \cs{write18} must be enabled. This allows the -% running of external programs during \TeX's compile run. -% Keep in mind that this is a security risk. The feature is an -% addition to \cs{TeX}. Mik\TeX, te\TeX, \TeX\ Live support it. -% In Web2C based \TeX\ distributions (te\TeX, \TeX\ Live) it can be -% enabled in the configuration file \xfile{texmf.cnf}: -% \begin{quote} -% |shell_escape = 1| -% \end{quote} -% Because of the security risk, it is better to do it on the -% command line only: -% \begin{quote} -% \texttt{--shell-escape} (te\TeX, \TeX\ Live)\\ -% \texttt{--enable-write18} (MiK\TeX) -% \end{quote} -% Example: -% \begin{quote} -% |pdflatex -shell-escape test.tex| -% \end{quote} -% \item -% The program \xprogram{epstopdf} for the conversion from EPS -% to PDF. However, other programs can -% be used and configured by \cs{DeclareGraphicsRule}. -% Example: -% \begin{quote} -% |\epstopdfDeclareGraphicsRule{.eps}{pdf}{.pdf}{%|\\ -% | ps2pdf -dEPSCrop #1 \OutputFile|\\ -% |}| -% \end{quote} -% \end{itemize} -% -% \subsection{Usage} -% -% The package is loaded after graphic\{s,x\}, e.g.: -% \begin{quote} -% |\usepackage[pdftex]{graphicx}|\\ -% |\usepackage{epstopdf}| -% \end{quote} -% Now images with file name extension \xfile{.eps} are detected -% and supported using \cs{includegraphics}. -% -% If the graphics file name is explicitly specified with extension -% \xfile{.eps} the new rule for EPS files is called and -% the conversion performed. If option \xoption{update} is in force -% then the conversion step is dropped if the target file already -% exists and is not older then the EPS file. -% -% The situation is more complicate if the graphics file is -% given without file name extension. Then the \xpackage{graphics} -% package must search for a supported image file. -% The possible extensions are stored in the graphics extension -% list, that can be set by \cs{DeclareGraphicsExtensions}. -% The algorithm: -% \begin{quote} -% \def\>{\mbox{}\quad} -% function search( \meta{filebase} )\\ -% \>foreach \meta{ext} in \meta{graphics extensions}\\ -% \>\>foreach \meta{dir} in \meta{current directory}, \meta{\cs{graphicspath}}\\ -% \>\>\>\meta{file} := \meta{dir} + \meta{filebase} + \meta{ext}\\ -% \>\>\>if exist \meta{file}\\ -% \>\>\>\>return found\\ -% \>return not found -% \end{quote} -% Package \xpackage{epstopdf} puts \xfile{.eps} at the end of the -% graphics extension search list. This is the behaviour of option -% \xoption{append} that is enabled by default. -% That means, the conversion is called last -% unless a supported file type cannot be found earlier. This avoids -% unnecessary conversion steps that slow down the \LaTeX\ run. -% If you want to use option \xoption{update} and your \pdfTeX\ supports -% it, then an outdated PDF file also would be found earlier unless -% \xoption{suffix} is used that is the default since version 2.0. -% -% With an empty option \xoption{suffix} and option -% \xoption{prepend} there is a risk that an original PDF file is overwritten: -% -% If the original image file is the PDF file and there is also a generated -% EPS file, then the original PDF file can be regenerated (depending -% on the option settings) and the original PDF file gets lost. -% Therefore option \xoption{suffix} is introduced in version 1.9 -% to create a separate name space for generated output files. -% -% \textbf{Note:} Usually the conversion program needs the exact location -% of the image file. Usually the current directory works. -% Also if the image file is found using \cs{graphicspath}, the -% location is known. However, if the image is somewhere -% in a directory of environment variable |TEXINPUTS|, then -% the package does not know the exact location and the -% conversion program will not find the image file unless it -% implements a search using |TEXINPUTS| (program \xprogram{kpsewhich} -% may be of help in this task). -% -% \subsection{Options} -% -% Options can be given as package options or later using: -% \begin{declcs}{epstopdfsetup} \M{key value list} -% \end{declcs} -% \LaTeX\ expands the option list before passing the option list -% to the package's option handling code. This can fail -% for option \xoption{suffix} if it contains some of the macros -% described below. Use \cs{epstopdfsetup} after the package is loaded. -% Or load package \xpackage{kvoptions-patch} before. This package -% is also loaded by option \xoption{patch} of package \xpackage{kvoptions}. -% \LaTeX's option code is redefined to respect key value options and -% let the values untouched. -% -% \begin{description} -% \def\It#1{\item[\xoption{#1}:]}^^A -% \It{update} -% The conversion program is only called, if the target file -% does not exist or is older than the source image file. -% \It{append} -% Puts the extension \xfile{.eps} at the end of the graphics extension list -% (default). -% \It{prepend} -% Puts the extension \xfile{.eps} at the begin of the graphics extension list. -% \It{outdir} -% The converted file may put in an other output directory. -% The value of \xoption{outdir} must include the directory separator. -% Example for the current directory: -% \begin{quote} -% |\epstopdfsetup{outdir=./}| -% \end{quote} -% For other directories ensure, that they can be found. -% See \cs{graphicspath} or |TEXINPUTS|. -% \It{suffix} -% This option takes a string that is put between the file name base -% and the extension of the output file. Rationale: It can happen, -% that a PDF file is the original file and the EPS file the -% generated file. If now the package thinks, that the PDF file -% is the generated file, it will `regnerate' it. But in reality -% the original file is lost. Therefore I recommend to use this -% option always to generate a separate name space for generated -% files. Proposed value is \texttt{-generated} or \texttt{.generated}. -% The suffix \texttt{.generated} will also work here without the need for -% package \xpackage{grffile}). -% -% Example: -% \begin{quote} -% |\epstopdfsetup{suffix=-generated}|\\ -% Then \xfile{foo.eps} is converted to \xfile{foo-generated.pdf}. -% \end{quote} -% \cs{SourceExt} can be used inside the suffix string. -% It's will be replaced by the extension of the image source -% file without the leading dot, for instance: -% \begin{quote} -% |\epstopdfsetup{suffix=-\SourceExt-converted-to}|\\ -% \xfile{foo.eps} $\Rightarrow$ \xfile{foo-eps-converted-to.pdf} -% \end{quote} -% See also the next option \xoption{prefersuffix} that -% modifies the behaviour of option \xoption{suffix} in some -% cases. -% -% Default for \xoption{suffix} is `|-\SourceExt-converted-to|'. -% -% \It{prefersuffix} -% If a suffix is set by option \xoption{suffix}, then there can be -% two image file names that could be taken into account for inclusion: -% A image file name with the suffix string inside -% its name and a image file name without; e.g. for \xfile{foo.eps} -% the names could be: -% \begin{quote} -% \xfile{foo-suffix.pdf}, \xfile{foo.pdf} -% \end{quote} -% If option \xoption{perfersuffix} is turned on, the -% file \xfile{foo-suffix.pdf} and its generation is preferred -% over using \xfile{foo.pdf}. Otherwise \xfile{foo.pdf} is included -% without generating \xfile{foo-suffix.pdf}. -% The default of option \xoption{prefersuffix} is \texttt{true}. -% \It{program@epstopdf} -% The name for the conversion program from EPS to PDF, -% default is `|epstopdf|'. -% \It{verbose} -% It prints some information about the image in the \xfile{.log} file -% (default). -% \end{description} -% -% \subsection{Configuration} -% -% \subsubsection{System configuration file \xfile{epstopdf-sys.cfg}} -% -% If \xfile{epstopdf-sys} exists it is loaded at the end of the -% package \xpackage{epstopdf-base} and before the user configuration -% file. It's intended for TeX distributors. Thus they could add -% additional conversion rules (e.g., .gif -> .png) or set options. -% -% \subsubsection{User configuration file \xfile{epstopdf.cfg}} -% -% A configuration file \xfile{epstopdf.cfg} is loaded at the end -% of the package if it exists. It can be used for changing -% the default option setting. Example: -% \begin{quote} -% |\epstopdfsetup{verbose=false}| -% \end{quote} -% -% \subsubsection{Conversion program} -% -% You can use \cs{DeclareGraphicsRule} in a similar way as the -% route via \xprogram{dvips} to specify the conversion -% command line. -% The conversion argument starts with a back tick, followed -% by the conversion command including parameters. -% -% The whole conversion argument should also be wrapped inside -% \cs{epstopdfcall}. This reduces the problem with packages -% (e.g. \xpackage{pst-pdf}) that use the conversion argument -% and expands it. Macros \cs{SourceFile}, \cs{OutputFile}, and -% \cs{SourceExt} are not defined outside \xpackage{epstopdf-base}'s -% \cs{Gin@setfile} and error messages because of undefined -% command names are the result. If \cs{epstopdfcall} detects that -% it is called outside \xpackage{epstopdf-base}'s \cs{Gin@setfile} -% then it replaces the conversion argument by -% package \xpackage{graphics}'s -% default, usually the image file. -% -% The following macros are available inside: -% \begin{description} -% \def\It#1{\item[\cs{#1}:]} -% \It{OutputFile}: output file name (with known path and extension) -% \It{SourceFile}: source file name (with known path and extension), -% usually the same as |#1|, -% \It{SourceExt}: source extension without leading dot. -% \end{description} -% -% \paragraph{Conversion from EPS to PDF.} -% Other programs than \xprogram{epstopdf} can be used to convert from -% EPS to PDF. Example that uses \xprogram{Ghostscript}: -% \begin{quote} -% |\DeclareGraphicsRule{.eps}{pdf}{.pdf}{%|\\ -% | \epstopdfcall{`ps2pdf -dEPSCrop #1 \noexpand\OutputFile}%|\\ -% |}| -% \end{quote} -% \cs{DeclareGraphicsRule} expands the argument, therefore \cs{noexpand} -% is necessary. As convenience package \xpackage{epstopdf-base} defines -% \cs{epstopdfDeclareGraphicsRule}. Then the conversion argument -% is not expanded, \cs{epstopdfcall} and the back tick are added: -% \begin{quote} -% |\epstopdfDeclareGraphicsRule{.eps}{pdf}{.pdf}{%|\\ -% | ps2pdf -dEPSCrop #1 \OutputFile|\\ -% |}| -% \end{quote} -% -% Also \cs{OutputFile} respects the setting of option \xoption{outdir}. -% -% \subsection{Other image formats} -% -% The support that package \xpackage{epstopdf} implements is not -% limited to EPS files. Other image conversions can be declared. -% The following example shows it for GIF images under Unix with -% ImageMagick's \xprogram{convert}: -%\begin{quote} -%\begin{verbatim} -%\epstopdfDeclareGraphicsRule{.gif}{png}{.png}{% -% convert #1 \OutputFile -%} -%\end{verbatim} -%\end{quote} -% The file extension \xfile{.gif} can be added to the extension list that -% package \xpackage{graphics} searches if the file extension -% is not given in \cs{includegraphics}. -% The list can be set by \cs{GraphicsExtensions}. -% \begin{quote} -% |\AppendGraphicsExtensions{.gif}|\\ -% or\\ -% |\PrependGraphicsExtensions{.gif}| -% \end{quote} -% -% \StopEventually{ -% } -% -% \section{Implementation} -% -% \begin{macrocode} -%<*package> -% \end{macrocode} -% -% \subsection{Wrapper package} -% -% Reload check, especially if the package is not used with \LaTeX. -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode35=6 % # - \catcode39=12 % ' - \catcode44=12 % , - \catcode45=12 % - - \catcode46=12 % . - \catcode58=12 % : - \catcode64=11 % @ - \catcode123=1 % { - \catcode125=2 % } - \expandafter\let\expandafter\x\csname ver@epstopdf.sty\endcsname - \ifx\x\relax % plain-TeX, first loading - \else - \def\empty{}% - \ifx\x\empty % LaTeX, first loading, - % variable is initialized, but \ProvidesPackage not yet seen - \else - \expandafter\ifx\csname PackageInfo\endcsname\relax - \def\x#1#2{% - \immediate\write-1{Package #1 Info: #2.}% - }% - \else - \def\x#1#2{\PackageInfo{#1}{#2, stopped}}% - \fi - \x{epstopdf}{The package is already loaded}% - \aftergroup\endinput - \fi - \fi -\endgroup% -% \end{macrocode} -% Package identification: -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode35=6 % # - \catcode39=12 % ' - \catcode40=12 % ( - \catcode41=12 % ) - \catcode44=12 % , - \catcode45=12 % - - \catcode46=12 % . - \catcode47=12 % / - \catcode58=12 % : - \catcode64=11 % @ - \catcode91=12 % [ - \catcode93=12 % ] - \catcode123=1 % { - \catcode125=2 % } - \expandafter\ifx\csname ProvidesPackage\endcsname\relax - \def\x#1#2#3[#4]{\endgroup - \immediate\write-1{Package: #3 #4}% - \xdef#1{#4}% - }% - \else - \def\x#1#2[#3]{\endgroup - #2[{#3}]% - \ifx#1\@undefined - \xdef#1{#3}% - \fi - \ifx#1\relax - \xdef#1{#3}% - \fi - }% - \fi -\expandafter\x\csname ver@epstopdf.sty\endcsname -\ProvidesPackage{epstopdf}% - [2016/05/15 v2.6 Conversion with epstopdf on the fly (HO)]% -% \end{macrocode} -% Larger catcode set because of configuration files needed. -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode123=1 % { - \catcode125=2 % } - \catcode64=11 % @ - \def\x{\endgroup - \expandafter\edef\csname ETE@AtEnd\endcsname{% - \endlinechar=\the\endlinechar\relax - \catcode13=\the\catcode13\relax - \catcode32=\the\catcode32\relax - \catcode35=\the\catcode35\relax - \catcode61=\the\catcode61\relax - \catcode64=\the\catcode64\relax - \catcode123=\the\catcode123\relax - \catcode125=\the\catcode125\relax - }% - }% -\x\catcode61\catcode48\catcode32=10\relax% -\catcode13=5 % ^^M -\endlinechar=13 % -\catcode35=6 % # -\catcode64=11 % @ -\catcode123=1 % { -\catcode125=2 % } -\def\TMP@EnsureCode#1#2{% - \edef\ETE@AtEnd{% - \ETE@AtEnd - \catcode#1=\the\catcode#1\relax - }% - \catcode#1=#2\relax -} -\TMP@EnsureCode{39}{12}% ' -\TMP@EnsureCode{40}{12}% ( -\TMP@EnsureCode{41}{12}% ) -\TMP@EnsureCode{42}{12}% * -\TMP@EnsureCode{45}{12}% - -\TMP@EnsureCode{47}{12}% / -\TMP@EnsureCode{91}{12}% [ -\TMP@EnsureCode{93}{12}% ] -\edef\ETE@AtEnd{\ETE@AtEnd\noexpand\endinput} -% \end{macrocode} -% -% \begin{macrocode} -\let\ETE@SavedAtEnd\ETE@AtEnd -\RequirePackage{epstopdf-base}[2016/05/15] -\let\ETE@AtEnd\ETE@SavedAtEnd -% \end{macrocode} -% -% \subsubsection{Option handling} -% -% \begin{macrocode} -\DeclareOption*{% - \expandafter\epstopdfsetup\expandafter{\CurrentOption}% -} -\ProcessOptions*\relax -% \end{macrocode} -% -% \begin{macrocode} -\ETE@AtEnd% -%</package> -% \end{macrocode} -% -% \subsection{Base package} -% -% \begin{macrocode} -%<*base> -% \end{macrocode} -% -% \subsection{Preparations} -% -% \subsubsection{Relead check and identification} -% -% Reload check, especially if the package is not used with \LaTeX. -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode35=6 % # - \catcode39=12 % ' - \catcode44=12 % , - \catcode45=12 % - - \catcode46=12 % . - \catcode58=12 % : - \catcode64=11 % @ - \catcode123=1 % { - \catcode125=2 % } - \expandafter\let\expandafter\x\csname ver@epstopdf-base.sty\endcsname - \ifx\x\relax % plain-TeX, first loading - \else - \def\empty{}% - \ifx\x\empty % LaTeX, first loading, - % variable is initialized, but \ProvidesPackage not yet seen - \else - \expandafter\ifx\csname PackageInfo\endcsname\relax - \def\x#1#2{% - \immediate\write-1{Package #1 Info: #2.}% - }% - \else - \def\x#1#2{\PackageInfo{#1}{#2, stopped}}% - \fi - \x{epstopdf-base}{The package is already loaded}% - \aftergroup\endinput - \fi - \fi -\endgroup% -% \end{macrocode} -% Package identification: -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode35=6 % # - \catcode39=12 % ' - \catcode40=12 % ( - \catcode41=12 % ) - \catcode44=12 % , - \catcode45=12 % - - \catcode46=12 % . - \catcode47=12 % / - \catcode58=12 % : - \catcode64=11 % @ - \catcode91=12 % [ - \catcode93=12 % ] - \catcode123=1 % { - \catcode125=2 % } - \expandafter\ifx\csname ProvidesPackage\endcsname\relax - \def\x#1#2#3[#4]{\endgroup - \immediate\write-1{Package: #3 #4}% - \xdef#1{#4}% - }% - \else - \def\x#1#2[#3]{\endgroup - #2[{#3}]% - \ifx#1\@undefined - \xdef#1{#3}% - \fi - \ifx#1\relax - \xdef#1{#3}% - \fi - }% - \fi -\expandafter\x\csname ver@epstopdf-base.sty\endcsname -\ProvidesPackage{epstopdf-base}% - [2016/05/15 v2.6 Base part for package epstopdf]% -% \end{macrocode} -% -% \subsubsection{Catcodes} -% -% \begin{macrocode} -\begingroup\catcode61\catcode48\catcode32=10\relax% - \catcode13=5 % ^^M - \endlinechar=13 % - \catcode123=1 % { - \catcode125=2 % } - \catcode64=11 % @ - \def\x{\endgroup - \expandafter\edef\csname ETE@AtEnd\endcsname{% - \endlinechar=\the\endlinechar\relax - \catcode13=\the\catcode13\relax - \catcode32=\the\catcode32\relax - \catcode35=\the\catcode35\relax - \catcode61=\the\catcode61\relax - \catcode64=\the\catcode64\relax - \catcode123=\the\catcode123\relax - \catcode125=\the\catcode125\relax - }% - }% -\x\catcode61\catcode48\catcode32=10\relax% -\catcode13=5 % ^^M -\endlinechar=13 % -\catcode35=6 % # -\catcode64=11 % @ -\catcode123=1 % { -\catcode125=2 % } -\def\TMP@EnsureCode#1#2{% - \edef\ETE@AtEnd{% - \ETE@AtEnd - \catcode#1=\the\catcode#1\relax - }% - \catcode#1=#2\relax -} -\TMP@EnsureCode{33}{12}% ! -\TMP@EnsureCode{39}{12}% ' -\TMP@EnsureCode{42}{12}% * -\TMP@EnsureCode{44}{12}% , -\TMP@EnsureCode{45}{12}% - -\TMP@EnsureCode{46}{12}% . -\TMP@EnsureCode{47}{12}% / -\TMP@EnsureCode{58}{12}% : -\TMP@EnsureCode{60}{12}% < -\TMP@EnsureCode{62}{12}% > -\TMP@EnsureCode{96}{12}% ` -\edef\ETE@AtEnd{\ETE@AtEnd\noexpand\endinput} -% \end{macrocode} -% -% \subsubsection{Load packages} -% -% \begin{macrocode} -\RequirePackage{infwarerr}[2007/09/09] -\RequirePackage{grfext}\relax -\RequirePackage{kvoptions}[2007/10/02] -\RequirePackage{pdftexcmds}[2007/11/11] -% \end{macrocode} -% -% \subsection{Checks} -% -% Check, whether package graphics is loaded -% (also graphicx loads graphics). -% Because miniltx.tex does not know \cs{@ifpackageloaded} -% we test for \cs{Gin@setfile} instead. -% \begin{macrocode} -\begingroup\expandafter\expandafter\expandafter\endgroup -\expandafter\ifx\csname Gin@setfile\endcsname\relax - \@PackageWarningNoLine{epstopdf}{% - No graphics package \string`graphic{s,x}\string' loaded% - }% - \newcommand*{\epstopdfsetup}[1]{}% - \expandafter\ETE@AtEnd -\fi% -% \end{macrocode} -% -% Check, whether pdftex.def is loaded. \cs{ver@pdftex.def} is not -% available with miniltx.tex, thus we test for \cs{Gin@driver}. -% \begin{macrocode} -\begingroup - \def\x{luatex.def}% - \ifx\Gin@driver\x - \else - \def\x{pdftex.def}% - \ifx\Gin@driver\x - \else - \@PackageWarningNoLine{epstopdf}{% - Drivers other than `pdftex' and `luatex' are not supported% - }% - \endgroup - \newcommand*{\epstopdfsetup}[1]{}% - \expandafter\ETE@AtEnd - \fi% - \fi% -\endgroup -% \end{macrocode} -% -% Check, whether the shell escape feature is enabled. -% -% \begin{macrocode} -\begingroup - \expandafter\ifx\csname pdf@shellescape\endcsname\relax - \else - \ifnum\pdf@shellescape>0 % - \else - \@PackageWarningNoLine{epstopdf}{% - Shell escape feature is not enabled% - }% - \fi - \fi -\endgroup -% \end{macrocode} -% -% \subsection{Package loading} -% -% \begin{macrocode} -% \end{macrocode} -% -% \subsection{Options} -% -% \begin{macrocode} -\SetupKeyvalOptions{family=ETE,prefix=ETE@} -\DeclareBoolOption{update} -\DeclareBoolOption{verbose} -\newif\ifETE@prepend -\DeclareVoidOption{prepend}{\ETE@prependtrue} -\DeclareVoidOption{append}{\ETE@prependfalse} -\DeclareStringOption{outdir} -\DeclareStringOption{suffix} -\DeclareBoolOption{prefersuffix} -\DeclareStringOption{program@epstopdf} -% \end{macrocode} -% Options \xoption{disable} and \xoption{enable} are for testing -% only. Therefore they are not documented on purpose. -% \begin{macrocode} -\DeclareBoolOption{disable} -\DeclareComplementaryOption{enable}{disable} -% \end{macrocode} -% \begin{macrocode} -\newcommand*{\epstopdfsetup}{\setkeys{ETE}} -% \end{macrocode} -% -% \subsubsection{Default setting} -% -% \begin{macrocode} -\epstopdfsetup{% - verbose,% - enable,% - append,% - update,% - prefersuffix,% - suffix=-\SourceExt-converted-to,% - program@epstopdf=epstopdf% -} -% \end{macrocode} -% -% \subsection{Make and verbose} -% -% \begin{macrocode} -\begingroup\expandafter\expandafter\expandafter\endgroup -\expandafter\ifx\csname pdf@filemoddate\endcsname\relax - \def\ETE@Make#1#2{% - \ifETE@update - \ETE@WarnModDate - \fi - \@firstofone - }% - \def\ETE@WarnModDate{% - \@PackageWarningNoLine{epstopdf}{% - \string\pdffilemoddate\space is not available,\MessageBreak - option `update' will be ignored% - }% - \global\let\ETE@WarnModDate\relax - }% - \def\ETE@FileInfo#1#2{#1 file: <#2>}% -\else - \def\ETE@Make#1#2{% - \ifETE@update - \ifnum\pdf@strcmp{\pdf@filemoddate{#1}}{\pdf@filemoddate{#2}}>0 % - \expandafter\expandafter\expandafter\@firstofone - \else - \@PackageInfoNoLine{epstopdf}{% - Output file is already uptodate% - }% - \expandafter\expandafter\expandafter\@gobble - \fi - \else - \expandafter\@firstofone - \fi - }% - \def\ETE@FileInfo#1#2{% - #1 file: <#2>% - \expandafter\expandafter\expandafter - \ETE@Date\pdf@filemoddate{#2}\@nil - \expandafter\expandafter\expandafter - \ETE@Size\pdf@filesize{#2}\@nil - }% - \def\ETE@Date#1\@nil{% - \ifx\\#1\\% - \else - \ETE@@Date#1\@nil - \fi - }% - \def\ETE@@Date#1:#2#3#4#5#6#7#8#9{% - \MessageBreak - \@spaces\space\space\space date: #2#3#4#5-#6#7-#8#9 % - \ETE@@Time - }% - \def\ETE@@Time#1#2#3#4#5#6#7\@nil{% - #1#2:#3#4:#5#6% - }% - \def\ETE@Size#1\@nil{% - \ifx\\#1\\% - \else - \MessageBreak - \@spaces\space\space\space size: #1 bytes% - \fi - }% -\fi -% \end{macrocode} -% -% \subsection{Adding conversion support} -% -% Patch \cs{Gin@setfile} to execute |#3|, if it contains -% a command. -% \begin{macrocode} -\expandafter\ifx\csname ETE@OrgGin@setfile\endcsname\relax - \let\ETE@OrgGin@setfile\Gin@setfile -\else - \@PackageError{epstopdf}{% - Command \string\ETE@OrgGin@setfile\space - already defined.\MessageBreak - }{% - Probably some package has included the code of this package% - \MessageBreak - instead of using \string\RequirePackage{epstopdf}.% - \MessageBreak - \@ehc - }% -\fi -\def\ETE@IfFileExists{% - \begingroup\expandafter\expandafter\expandafter\endgroup - \expandafter\ifx\csname grffile@IfFileExists\endcsname\relax - \expandafter\IfFileExists - \else - \global\let\ETE@IfFileExists\grffile@IfFileExists - \expandafter\grffile@IfFileExists - \fi -} -\def\ETE@Skip#1#2\x\fi\fi{% - \fi - \fi - \endgroup - \fi - \fi - #1% -} -\newif\ifETE@InsideSetfile -\newcommand*{\epstopdfcall}[1]{% - \ifETE@InsideSetfile - \expandafter\@firstoftwo - \else - \expandafter\@secondoftwo - \fi - {`#1}% - {\Gin@base\Gin@ext}% -} -\def\ETE@DefCommandLine#1{% - \edef\CommandLine{\expandafter\fi\if`#1}% -} -\def\ETE@DefX#1{% - \expandafter\expandafter\expandafter\def - \expandafter\expandafter\expandafter\x - \expandafter\expandafter\expandafter{% - \expandafter\fi\if`#1\relax\else - }% -} -\def\ETE@Gin@setfile#1#2#3{% - \ifETE@disable - \ETE@OrgGin@setfile{#1}{#2}{#3}% - \else - \begingroup - \ETE@InsideSetfiletrue - \ETE@DefX{#3}% - \expandafter\endgroup - \ifx\x\@empty - \ETE@OrgGin@setfile{#1}{#2}{#3}% - \else - \begingroup - \ETE@InsideSetfiletrue - \def\GraphicsType{#1}% - \def\GraphicsRead{#2}% - \ifETE@prefersuffix - \else - \ifx\ETE@suffix\@empty - \else - \ETE@IfFileExists{\Gin@base\GraphicsRead}{% - \ETE@Skip{% - \ETE@OrgGin@setfile{#1}{#2}{\Gin@base#2}% - }% - }{% - \let\next\relax - }% - \next - \fi - \fi - \ifx\Gin@ext\relax - \let\SourceExt\Gin@eext - \def\SourceFile{\Gin@base\Gin@eext}% - \else - \let\SourceExt\Gin@ext - \def\SourceFile{\Gin@base\Gin@ext}% - \fi - \edef\SourceExt{% remove dot - \expandafter\@cdr\SourceExt\@empty\@nil - }% - \let\OutputDirectory\ETE@outdir - \ifx\OutputDirectory\@empty - \edef\OutputFile{\ETE@GenerateName{\Gin@base}{#2}}% - \else - \begingroup - \filename@parse{\Gin@base#2}% - \edef\x{\endgroup - \def\noexpand\OutputFile{% - \ETE@GenerateName{% - \OutputDirectory\filename@base - }{#2}% - }% - }% - \x - \fi - \ETE@DefCommandLine{#3}% - \ifETE@verbose - \@PackageInfo{epstopdf}{% - \ETE@FileInfo{Source}\SourceFile\MessageBreak - \ETE@FileInfo{Output}\OutputFile\MessageBreak - Command: <\CommandLine>\MessageBreak - \string\includegraphics - }% - \fi - \ETE@Make\SourceFile\OutputFile{% - \pdf@system{\CommandLine}% - \ifETE@verbose - \@PackageInfoNoLine{epstopdf}{% - \ETE@FileInfo{Result}\OutputFile - }% - \fi - }% - \edef\x{\endgroup - \ifx\OutputDirectory\@empty - \else - \def\noexpand\Gin@base{% - \OutputDirectory\noexpand\filename@base - }% - \fi - \ifx\ETE@suffix\@empty - \else - \edef\noexpand\Gin@base{% - \noexpand\Gin@base\ETE@suffix - }% - \fi - \noexpand\ETE@OrgGin@setfile{% - \GraphicsType - }{% - \GraphicsRead - }{% - \OutputFile - }% - }% - \x - \fi - \fi -} -\let\Gin@setfile\ETE@Gin@setfile -\def\ETE@GenerateName#1#2{% - #1\ETE@suffix#2% -} -% \end{macrocode} -% -% \subsection{Declare graphics rule} -% -% \begin{macrocode} -\newcommand*{\epstopdfDeclareGraphicsRule}[4]{% - \ifx\\#4\\% - \@PackageError{epstopdf-base}{% - Conversion command is missing% - }\@ehc - \else - \begingroup - \@ifundefined{Gin@rule@#1}{% - }{% - \@PackageInfo{epstopdf-base}{% - Redefining graphics rule for `#1'% - }% - }% - \endgroup - \@namedef{Gin@rule@#1}##1{{#2}{#3}{\epstopdfcall{#4}}}% - \fi -} -% \end{macrocode} -% -% \cs{DeclareGraphicsRule} for .eps -% \begin{macrocode} -\epstopdfDeclareGraphicsRule{.eps}{pdf}{.pdf}{% - \ETE@epstopdf{#1}% -} -\def\ETE@epstopdf#1{% - \ETE@program@epstopdf\space - \ifcase\ifx\OutputDirectory\@empty - \ifx\ETE@suffix\@empty - 1% - \fi - \fi - 0 % - --outfile=\OutputFile\space - \fi - #1% -} -% \end{macrocode} -% -% \begin{macrocode} -\ifETE@prepend - \expandafter\PrependGraphicsExtensions -\else - \expandafter\AppendGraphicsExtensions -\fi -{.eps} -\let\ETE@prepend\@undefined -\DeclareVoidOption{prepend}{% - \PrependGraphicsExtensions{.eps}% -} -\let\ETE@append\@undefined -\DeclareVoidOption{append}{% - \AppendGraphicsExtensions{.eps}% -} -% \end{macrocode} -% -% \begin{macrocode} -\InputIfFileExists{epstopdf-sys.cfg}{}{} -\InputIfFileExists{epstopdf.cfg}{}{} -% \end{macrocode} -% -% \begin{macrocode} -\ETE@AtEnd% -%</base> -% \end{macrocode} -% -% \section{Test} -% -% \subsection{Preface for standard catcode check} -% -% \begin{macrocode} -%<*test1> -\input miniltx.tex\relax -\def\Gin@driver{pdftex.def} -\input graphicx.sty\relax -\resetatcatcode -%</test1> -% \end{macrocode} -% -% \subsection{Catcode checks for loading} -% -% \begin{macrocode} -%<*test1> -% \end{macrocode} -% \begin{macrocode} -\catcode`\{=1 % -\catcode`\}=2 % -\catcode`\#=6 % -\catcode`\@=11 % -\expandafter\ifx\csname count@\endcsname\relax - \countdef\count@=255 % -\fi -\expandafter\ifx\csname @gobble\endcsname\relax - \long\def\@gobble#1{}% -\fi -\expandafter\ifx\csname @firstofone\endcsname\relax - \long\def\@firstofone#1{#1}% -\fi -\expandafter\ifx\csname loop\endcsname\relax - \expandafter\@firstofone -\else - \expandafter\@gobble -\fi -{% - \def\loop#1\repeat{% - \def\body{#1}% - \iterate - }% - \def\iterate{% - \body - \let\next\iterate - \else - \let\next\relax - \fi - \next - }% - \let\repeat=\fi -}% -\def\RestoreCatcodes{} -\count@=0 % -\loop - \edef\RestoreCatcodes{% - \RestoreCatcodes - \catcode\the\count@=\the\catcode\count@\relax - }% -\ifnum\count@<255 % - \advance\count@ 1 % -\repeat - -\def\RangeCatcodeInvalid#1#2{% - \count@=#1\relax - \loop - \catcode\count@=15 % - \ifnum\count@<#2\relax - \advance\count@ 1 % - \repeat -} -\def\RangeCatcodeCheck#1#2#3{% - \count@=#1\relax - \loop - \ifnum#3=\catcode\count@ - \else - \errmessage{% - Character \the\count@\space - with wrong catcode \the\catcode\count@\space - instead of \number#3% - }% - \fi - \ifnum\count@<#2\relax - \advance\count@ 1 % - \repeat -} -\def\space{ } -\expandafter\ifx\csname LoadCommand\endcsname\relax - \def\LoadCommand{\input epstopdf.sty\relax}% -\fi -\def\Test{% - \RangeCatcodeInvalid{0}{47}% - \RangeCatcodeInvalid{58}{64}% - \RangeCatcodeInvalid{91}{96}% - \RangeCatcodeInvalid{123}{255}% - \catcode`\@=12 % - \catcode`\\=0 % - \catcode`\%=14 % - \LoadCommand - \RangeCatcodeCheck{0}{36}{15}% - \RangeCatcodeCheck{37}{37}{14}% - \RangeCatcodeCheck{38}{47}{15}% - \RangeCatcodeCheck{48}{57}{12}% - \RangeCatcodeCheck{58}{63}{15}% - \RangeCatcodeCheck{64}{64}{12}% - \RangeCatcodeCheck{65}{90}{11}% - \RangeCatcodeCheck{91}{91}{15}% - \RangeCatcodeCheck{92}{92}{0}% - \RangeCatcodeCheck{93}{96}{15}% - \RangeCatcodeCheck{97}{122}{11}% - \RangeCatcodeCheck{123}{255}{15}% - \RestoreCatcodes -} -\Test -\csname @@end\endcsname -\end -% \end{macrocode} -% \begin{macrocode} -%</test1> -% \end{macrocode} -% -% \section{Installation} -% -% \subsection{Download} -% -% \paragraph{Package.} This package is available on -% CTAN\footnote{\CTANpkg{epstopdf}}: -% \begin{description} -% \item[\CTAN{macros/latex/contrib/oberdiek/epstopdf.dtx}] The source file. -% \item[\CTAN{macros/latex/contrib/oberdiek/epstopdf.pdf}] Documentation. -% \end{description} -% -% -% \paragraph{Bundle.} All the packages of the bundle `oberdiek' -% are also available in a TDS compliant ZIP archive. There -% the packages are already unpacked and the documentation files -% are generated. The files and directories obey the TDS standard. -% \begin{description} -% \item[\CTANinstall{install/macros/latex/contrib/oberdiek.tds.zip}] -% \end{description} -% \emph{TDS} refers to the standard ``A Directory Structure -% for \TeX\ Files'' (\CTAN{tds/tds.pdf}). Directories -% with \xfile{texmf} in their name are usually organized this way. -% -% \subsection{Bundle installation} -% -% \paragraph{Unpacking.} Unpack the \xfile{oberdiek.tds.zip} in the -% TDS tree (also known as \xfile{texmf} tree) of your choice. -% Example (linux): -% \begin{quote} -% |unzip oberdiek.tds.zip -d ~/texmf| -% \end{quote} -% -% \paragraph{Script installation.} -% Check the directory \xfile{TDS:scripts/oberdiek/} for -% scripts that need further installation steps. -% Package \xpackage{attachfile2} comes with the Perl script -% \xfile{pdfatfi.pl} that should be installed in such a way -% that it can be called as \texttt{pdfatfi}. -% Example (linux): -% \begin{quote} -% |chmod +x scripts/oberdiek/pdfatfi.pl|\\ -% |cp scripts/oberdiek/pdfatfi.pl /usr/local/bin/| -% \end{quote} -% -% \subsection{Package installation} -% -% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting -% \docstrip\ archive. The files are extracted by running the -% \xfile{.dtx} through \plainTeX: -% \begin{quote} -% \verb|tex epstopdf.dtx| -% \end{quote} -% -% \paragraph{TDS.} Now the different files must be moved into -% the different directories in your installation TDS tree -% (also known as \xfile{texmf} tree): -% \begin{quote} -% \def\t{^^A -% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}} -% epstopdf.sty & tex/latex/oberdiek/epstopdf.sty\\ -% epstopdf-base.sty & tex/latex/oberdiek/epstopdf-base.sty\\ -% epstopdf.pdf & doc/latex/oberdiek/epstopdf.pdf\\ -% test/epstopdf-test1.tex & doc/latex/oberdiek/test/epstopdf-test1.tex\\ -% epstopdf.dtx & source/latex/oberdiek/epstopdf.dtx\\ -% \end{tabular}^^A -% }^^A -% \sbox0{\t}^^A -% \ifdim\wd0>\linewidth -% \begingroup -% \advance\linewidth by\leftmargin -% \advance\linewidth by\rightmargin -% \edef\x{\endgroup -% \def\noexpand\lw{\the\linewidth}^^A -% }\x -% \def\lwbox{^^A -% \leavevmode -% \hbox to \linewidth{^^A -% \kern-\leftmargin\relax -% \hss -% \usebox0 -% \hss -% \kern-\rightmargin\relax -% }^^A -% }^^A -% \ifdim\wd0>\lw -% \sbox0{\small\t}^^A -% \ifdim\wd0>\linewidth -% \ifdim\wd0>\lw -% \sbox0{\footnotesize\t}^^A -% \ifdim\wd0>\linewidth -% \ifdim\wd0>\lw -% \sbox0{\scriptsize\t}^^A -% \ifdim\wd0>\linewidth -% \ifdim\wd0>\lw -% \sbox0{\tiny\t}^^A -% \ifdim\wd0>\linewidth -% \lwbox -% \else -% \usebox0 -% \fi -% \else -% \lwbox -% \fi -% \else -% \usebox0 -% \fi -% \else -% \lwbox -% \fi -% \else -% \usebox0 -% \fi -% \else -% \lwbox -% \fi -% \else -% \usebox0 -% \fi -% \else -% \lwbox -% \fi -% \else -% \usebox0 -% \fi -% \end{quote} -% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's -% TDS installing feature, then some files can already be in the right -% place, see the documentation of \docstrip. -% -% \subsection{Refresh file name databases} -% -% If your \TeX~distribution -% (\teTeX, \mikTeX, \dots) relies on file name databases, you must refresh -% these. For example, \teTeX\ users run \verb|texhash| or -% \verb|mktexlsr|. -% -% \subsection{Some details for the interested} -% -% \paragraph{Unpacking with \LaTeX.} -% The \xfile{.dtx} chooses its action depending on the format: -% \begin{description} -% \item[\plainTeX:] Run \docstrip\ and extract the files. -% \item[\LaTeX:] Generate the documentation. -% \end{description} -% If you insist on using \LaTeX\ for \docstrip\ (really, -% \docstrip\ does not need \LaTeX), then inform the autodetect routine -% about your intention: -% \begin{quote} -% \verb|latex \let\install=y\input{epstopdf.dtx}| -% \end{quote} -% Do not forget to quote the argument according to the demands -% of your shell. -% -% \paragraph{Generating the documentation.} -% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate -% the documentation. The process can be configured by the -% configuration file \xfile{ltxdoc.cfg}. For instance, put this -% line into this file, if you want to have A4 as paper format: -% \begin{quote} -% \verb|\PassOptionsToClass{a4paper}{article}| -% \end{quote} -% An example follows how to generate the -% documentation with pdf\LaTeX: -% \begin{quote} -%\begin{verbatim} -%pdflatex epstopdf.dtx -%makeindex -s gind.ist epstopdf.idx -%pdflatex epstopdf.dtx -%makeindex -s gind.ist epstopdf.idx -%pdflatex epstopdf.dtx -%\end{verbatim} -% \end{quote} -% -% \begin{History} -% \begin{Version}{2001/01/06 v1.0} -% \item -% First public version, -% published in the \pdfTeX\ mailing list. -% \end{Version} -% \begin{Version}{2001/02/04 v1.1} -% \item -% Minor documentation update. -% \item -% CTAN. -% \end{Version} -% \begin{Version}{2006/02/20 v1.2} -% \item -% DTX framework. -% \item -% Compatibility for \xfile{miniltx.tex}. -% \end{Version} -% \begin{Version}{2006/08/26 v1.3} -% \item -% Check for \cs{write18} if available and print a warning -% if the feature is not enabled. -% \end{Version} -% \begin{Version}{2007/04/26 v1.4} -% \item -% Documentation rewritten and extended. -% \end{Version} -% \begin{Version}{2007/10/02 v1.5} -% \item -% New option \xoption{update}: If the converted file exists, it will be only -% converted if it is out of date. -% \item -% Updating the extension list is delegated to package \xpackage{grfext}. -% Fine tuning is done by the new options \xoption{append}, \xoption{prepend}. -% \item -% New option \xoption{outdir} for changing the output directory. -% \item -% New option \xoption{verbose}. -% \item -% \cs{SourceFile} and \cs{OutputFile} introduced. -% \item -% Configuration file support added. -% \end{Version} -% \begin{Version}{2007/11/11 v1.6} -% \item -% Use of package \xpackage{pdftexcmds} for \LuaTeX\ support. -% \end{Version} -% \begin{Version}{2008/05/06 v1.7} -% \item -% Warning messages uses ``loaded'' instead of ``found''. -% \end{Version} -% \begin{Version}{2009/03/01 v1.8} -% \item -% Warning message for missing \xfile{pdftex.def} changed. -% \end{Version} -% \begin{Version}{2009/07/06 v1.9} -% \item -% Option \xoption{suffix} added. -% \end{Version} -% \begin{Version}{2009/07/07 v1.10} -% \item -% \cs{SourceExt} added. -% \item -% If option \xoption{suffix} is set, the inclusion of -% an image without the suffix namespace is preferred over generating the -% the image within the suffix namespace. -% \end{Version} -% \begin{Version}{2009/07/12 v2.0} -% \item -% New default settings. -% \item -% Package is split into \xpackage{epstopdf} that only takes package -% options and loads \xpackage{epstopdf-base} that does the work. -% \item -% \cs{epstopdfDeclareGraphicsRule} and \cs{epstopdfcall} added. -% \item -% \xfile{epstopdf-sys.cfg} is loaded before \xfile{epstopdf.cfg} -% if \xfile{epstopdf-sys.cfg} exists. -% \end{Version} -% \begin{Version}{2009/07/15 v2.1} -% \item -% Default setting: \xoption{verbose} is now turned on as the -% documentation for v2.0 said. -% \item -% Documentation fixes. -% \end{Version} -% \begin{Version}{2009/07/16 v2.2} -% \item -% Fixed redefined \cs{Gin@setfile}. -% \item -% Documentation extended for package options. -% \end{Version} -% \begin{Version}{2009/09/24 v2.3} -% \item -% Bug fix for the case that both option \xoption{suffix} and -% \xoption{outdir} are used. -% \end{Version} -% \begin{Version}{2009/10/17 v2.4} -% \item -% The name of the program `epstopdf' can be configured via -% the new option \xoption{program@epstopdf}. -% \end{Version} -% \begin{Version}{2016/05/15 v2.5} -% \item -% Wording of warning message fixed (Karl Berry). -% \item -% \cs{ETE@Gin@setfile} added (Karl Berry). -% \end{Version} -% \begin{Version}{2016/05/15 v2.6} -% \item -% luaTeX compatibility -% \end{Version} -% \end{History} -% -% \PrintIndex -% -% \Finale -\endinput |