summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/minutes/blindtext.dtx
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/minutes/blindtext.dtx')
-rw-r--r--Master/texmf-dist/source/latex/minutes/blindtext.dtx686
1 files changed, 0 insertions, 686 deletions
diff --git a/Master/texmf-dist/source/latex/minutes/blindtext.dtx b/Master/texmf-dist/source/latex/minutes/blindtext.dtx
deleted file mode 100644
index e37f2f12712..00000000000
--- a/Master/texmf-dist/source/latex/minutes/blindtext.dtx
+++ /dev/null
@@ -1,686 +0,0 @@
-% ^^A CTAN:macros/latex/contrib/supported/minutes
-\def\fileversion{V1.4}
-\def\filedate{2003/12/14}
-% ^^A For index and changes, run:
-% ^^A makeindex -s gglo -o blindtext.gls blindtext.glo
-% ^^A makeindex -s gind -o blindtext.ind blindtext.idx
-%
-% \CheckSum{451}
-%%
-%% \CharacterTable
-%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%% Digits \0\1\2\3\4\5\6\7\8\9
-%% Exclamation \! Double quote \" Hash (number) \#
-%% Dollar \$ Percent \% Ampersand \&
-%% Acute accent \' Left paren \( Right paren \)
-%% Asterisk \* Plus \+ Comma \,
-%% Minus \- Point \. Solidus \/
-%% Colon \: Semicolon \; Less than \<
-%% Equals \= Greater than \> Question mark \?
-%% Commercial at \@ Left bracket \[ Backslash \\
-%% Right bracket \] Circumflex \^ Underscore \_
-%% Grave accent \` Left brace \{ Vertical bar \|
-%% Right brace \} Tilde \~}
-%%
-% \DoNotIndex{\" , \-, \flqq,\frqq, \ ,\def, \begin, \end}
-% \DoNotIndex{\csname,\endcsname, \expandafter, \global, \newcommand}
-% \DoNotIndex{\advance, \filedate, \fileversion, \MessageBreak}
-% \DoNotIndex{\newcount, \newcounter, \newif, \or}
-% \DoNotIndex{\if, \else, \fi, \ifcase, \ifdefined, \ifnum, \ifx, \loop, \repeat}
-% \DoNotIndex{\heartsuit}
-% \DoNotIndex{\NeedsTeXFormat, \providecommand, \ProvidesPackage, \relax, \RequirePackage}
-% \DoNotIndex{\par, \chapter, \section, \subsection, \subsubsection, \paragraph, }
-% \DoNotIndex{\selectlanguage, \stepcounter, \ss, \space, \setcounter}
-% \DoNotIndex{\value, \typeout, \long, \renewcommand}
-%
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-%\documentclass{refart}
-%\usepackage{doc}
-\usepackage[german,english]{babel}
-\usepackage{blindtext}
-\usepackage{makeidx}
-\IfFileExists{hyperref.sty}{\usepackage{hyperref}}{}
-\CodelineIndex
-\makeindex
-%\OnlyDescription
-\begin{document}
- \DocInput{Blindtext.dtx}
-\end{document}
-%</driver>
-%
-%<*package>
-% \fi
-%
-% \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package
-% \newcommand*{\Lenv}[1]{\texttt {#1}} ^^A typeset a package
-%
-% \title{Blindtext.sty:\\
-% Creating text for testing/
-% Texterzeugung zum testen}
-%
-% \author{Knut Lickert\\knut@lickert.net}
-% \maketitle
-%
-%\begin{abstract}
-%\selectlanguage{english}
-%This packet create text with the commands \verb|\blindtext| and
-%\verb|\Blindtext|.
-%With this created text you can get an impression of the look
-%of new classes and packages.
-%
-%\selectlanguage{german}
-%Mit diesem Paket kann man lange Texte erzeugen, ohne lange
-%Texte einzugeben.
-%Sinn ist die Erzeugung langer Beispieltexte, ohne den
-%Quelltext lang zu machen.
-%\end{abstract}
-%
-%\selectlanguage{english}
-%\section{Overview/{\"U}bersicht}
-%\subsection{The commands/Die Kommandos}
-%\begin{figure}
-%\renewcommand{\arraystretch}{1.1}
-%\begin{tabular}{p{0.3\textwidth}*{2}{p{0.3\textwidth}}}\hline
-%Command/Makro & englisch & german \\\hline
-%\verb|\blinddocument| & creates a document & erzeugt ein Dokument\\
-%\verb|\Blinddocument| & creates a big document & erzeugt ein gro{\ss}es Dokument\\
-%\verb|\blindtext| & creates text & erzeugt Text\\
-%\verb|\Blindtext| & creates more text & erzeugt mehr Text\\
-%\verb|\blindlist{env}| & creates a list & erzeugt eine Liste\\
-%\verb|\blindlistoptional|\newline\hspace*{2em}\verb|{env}| & creates a list with \verb|\item[]| & erzeugt eine Liste mit \verb|\item[]|\\
-%\verb|\blindlistlist[level]{env}| & creates cascaded lists & erzeugt geschachtelte Listen\\
-%\verb|\Blindlist{env}| & creates a big list & erzeugt eine gro{\ss}e Liste\\
-%\verb|\Blindlistoptional|\newline\hspace*{2em}\verb|{env}| & creates a big list with \verb|\item[]| & erzeugt eine gro{\ss}e Liste mit \verb|\item[]|\\
-%\verb|\blinditemize| & creates an itemize list & erzeugt eine itemize-Liste\\
-%\verb|\blindenumerate| & creates an enumerate list & erzeugt eine enume\-ra\-te-Liste\\
-%\verb|\blinddescription| & creates a description list & erzeugt eine des\-crip\-tion-Liste\\\hline
-%$\sim$[x] & repetition & Wiederholungsfaktor\\
-% ^^A%\verb|\lovetext| & I love you in different languages & mehrsprachig: Ich liebe dich\\
-%\end{tabular}
-%\caption{Command Overview}
-%\end{figure}
-%
-% \DescribeMacro{\blinddocument}
-% {\verb|\blinddocument|} create a document with sections,
-% subsections\ldots and lists (\Lenv{itemize},
-% \Lenv{enumerate} and \Lenv{description}).
-% \DescribeMacro{\Blinddocument}
-% {\verb|\Blinddocument|} create a
-% document with bigger sections, subsections\ldots and longer
-% lists.\par
-%
-% The smallest document to check the look of a class would be:
-% \begin{quote}
-% \begin{verbatim}
-% \documentclass{<class>}
-% \usepackage{blindtext}
-% \begin{document}
-% \blinddocument
-% \end{document}
-% \end{verbatim}
-% \end{quote}
-%
-% \DescribeMacro{\blindtext}
-% \verb|\blindtext[x]| create a text. The optional parameter defines a
-% repetition. Default for the repetition is one and can be modified
-% with \verb|\setcounter{blindtext}{1}|.
-%
-% \DescribeMacro{\Blindtext}
-% {\verb|\Blindtext[x][y]|} create $x$ paragraphs with the text of
-% {\verb|\blindtext|}. The first optional parameter defines a
-% repetition of the paragraphs. Default for the repetition is five
-% and can be modified with \verb|\setcounter{Blindtext}{5}|. The
-% second optional parameter is given to \verb|\blindtext|.
-%
-% It is possible to add a start and end sequence for each paragraph.
-%
-% \DescribeMacro{\parstart}
-% \DescribeMacro{\parend}
-% The two macros \verb|\parstart| and \verb|\parend| define a
-% starting and ending sequence for each paragraph in
-% \verb|\Blindtext|.
-%
-% \DescribeMacro{\blindlist}
-% {\verb|\blindlist{env}[x]|} create a list, the type is defined by the
-% obligatory parameter. The optional parameter defines a repetition.
-% Default for the repetition is five and can be modified with
-% \verb|\setcounter{blindlist}{x}|.
-%
-% \DescribeMacro{\blindlistlist}
-% {\verb|\blindlistlist[level]{env}[x]|} creates cascaded lists up to
-% level \verb|level|, the type is defined by the second obligatory
-% parameter. The optional parameter defines a repetition. Default is the
-% same like in \verb|\blindlist|.
-%
-% \DescribeMacro{\Blindlist}
-% \verb|\Blindlist{env}[x]| create a list with long texts. The optional parameter defines a
-% repetition. Default for the repetition is five and can be modified
-% with \verb|\setcounter{blindlist}{x}|.
-%
-% \DescribeMacro{\blindlistoptional}
-% {\verb|\blindlistoptional{env}[x]|} create a list with \verb|\item[]|. The
-% list is defined by the obligatory parameter. The optional
-% parameter defines a repetition. Default for the repetition is five
-% and can be modified with \verb|\setcounter{blindlist}{x}|.
-%
-% \DescribeMacro{\Blindlistoptional}
-% \verb|\Blindlistoptional| create a list like
-% \verb|\blindlistoptional| with long texts.
-%
-% \DescribeMacro{\blinditemize} \DescribeMacro{\Blinditemize}
-% \DescribeMacro{\blindenumerate} \DescribeMacro{\Blindenumerate}
-% \DescribeMacro{\blinddescription} \DescribeMacro{\Blinddescription}
-% This commands are a abbreviation for \verb|\blindlist{itemize}|, \verb|\blindlist{enumerate}|
-% and \verb|\blindlist{description}|.
-%
-% \StopEventually
-%
-% \selectlanguage{english}
-% \section{Implementation/Implementierung}
-%
-% \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{blindtext}[\filedate\space\fileversion\space%
- blindtext-Package]
-\typeout{Minutes-Package}
-\RequirePackage{xspace}
-% \end{macrocode}
-% Just in case the french quote are not defined
-% \begin{macrocode}
-\providecommand{\frqq}{}
-\providecommand{\flqq}{}
-% \end{macrocode}
-%
-% First we need some counters for the number of repetitions of the
-% text and the paragraphs.
-% \begin{macrocode}
-\newcounter{blindtext}\setcounter{blindtext}{1}
-\newcounter{Blindtext}\setcounter{Blindtext}{5}
-% \end{macrocode}
-%
-% \begin{macro}{\blindtext}
-%
-% \verb|\blindtext[x]| write $x\times$ a sentence.
-% The default is stored in the counter \verb|blindtext|. This value
-% can be changed with \verb|\setcounter{blindtext}{1}|.
-%
-% \begin{macrocode}
-\newcommand{\blindtext}[1][\value{blindtext}]{
-\newcount\xx\xx=1
-\loop
-\blindtext@text
-\ifnum\xx<#1\advance\xx by 1
-\repeat
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\Blindtext}
-% \verb|\Blindtext[x][y]| execute $x\times$\verb|\blindtext[y]|. Each
-% \verb|\blindtext[y]| built a paragraph.
-% The default is stored in the counter \verb|Blindtext|. This value
-% can be changed with \verb|\setcounter{Blindtext}{5}|.
-% The counter \verb|blindtext@numBlindtext| stores the first
-% optional parameter to be used in \verb|\blindtext@Blindtext|.
-% \begin{macrocode}
-\newcount\blindtext@numBlindtext
-\newcommand{\Blindtext}[1][\value{Blindtext}]{
-\blindtext@numBlindtext=#1
-\blind@Blindtext}
-% \end{macrocode}
-% \end{macro} %^^ABlindtext
-%
-% \begin{macro}{\blind@Blindtext}
-% This macro continue \verb|\Blindtext| with a second optional parameter.
-%
-% Each paragraph starts and end with a text, which can be defined with
-% \verb|\starttext| or \verb|\endtext|.
-% \begin{macrocode}
-\newcommand{\blind@Blindtext}[1][\value{blindtext}]{
-\newcount\yy\yy=1
-\loop
-{\blindtext@parstart\blindtext[#1]\blindtext@parend\par}
-\ifnum\yy<\blindtext@numBlindtext\advance\yy by 1
-\repeat
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blind@Blindtext}
-%
-% \begin{macro}{\parstart}
-% \begin{macro}{\parend}
-% \begin{macrocode}
-\newcommand{\blindtext@parstart}{} %Text at start of paragraph
-\newcommand{\blindtext@parend}{} %Text at end of paragraph
-\newcommand{\parstart}[1]{\renewcommand{\blindtext@parstart}{#1}}
-\newcommand{\parend}[1]{\renewcommand{\blindtext@parend}{#1}}
-% \end{macrocode}
-% \end{macro}%^^A{\parstart}
-% \end{macro}%^^A{\parend}
-%
-% \section{Lists}
-% Here I define some flags to decide in the lists, if we have to
-% create big items and if we need the optional parameter at
-% \verb|\item|. This flags are reset in \verb|\blind@list|.\par
-% The counter \verb|blindlist| define the default number of items in a list.
-% The counter \verb|blindlistitem| is needed by \verb|\blindtext@count|
-% to write a text like 'first', 'second'\ldots.
-% \begin{macrocode}
-\newif\ifblind@long\blind@longfalse
-\newif\ifblind@optional\blind@optionalfalse
-\newcounter{blindlist}
-\newcounter{blindlistlevel}%Up tu X level
-\newcounter{blindlist@level}%internal counter
-\newcount\blind@listitem
-% \end{macrocode}
-%
-% \begin{macro}{\blindlist}
-% \begin{macro}{\blind@listtype}
-% \verb|\blindlist{env}[x]| write a env-list with $x$ items.
-% The default is stored in the counter \verb|blindlist|. This value
-% can be changed with \verb|\setcounter{blindlist}{1}|.
-% The type of list is stored in \verb|\blind@listtype|.
-% \begin{macrocode}
-%% ^^A-----------------------------------------------------------
-\newcommand{\blindlist}[1]{
-\def\blind@listtype{#1}
-\setcounter{blind@levelcount}{1}
-\blind@list
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blindlist}
-% \end{macro}%^^A{\blind@listtype}
-%
-% \begin{macro}{\blind@list}
-% This macro continue the macro \verb|\blindlist| and with the
-% optional parameter. After the printout, we reset the flags and the
-% counter for the list text.
-% \begin{macrocode}
-\newcommand{\blind@list}[1][5]{
-\setcounter{blindlist}{#1}
-\addtocounter{blindlist@level}{1}%depth of list
-\blind@listitem=1
-\begin{\blind@listtype}
-\blind@items
-\end{\blind@listtype}
-\blind@longfalse
-\blind@optionalfalse
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blind@list}
-%
-% \begin{macro}{\blindlistlist}
-% \verb|\blindlistlist[num]{env}[x]| writes cascaded lists up to level num.
-% \begin{macrocode}
-\newcommand{\blindlistlist}[2][4]{
-\setcounter{blindlistlevel}{#1}
-\setcounter{blindlist@level}{0}%deepest reached level
-\setcounter{blind@levelcount}{1}%actual level for printout
-\def\blind@listtype{#2}
-\blind@list
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blindlistlist}
-% \begin{macro}{\blindlistlistoptional}
-% Like \verb|\blindlistlist[num]{env}[x]| but for environment with optional parameters.
-% \begin{macrocode}
-\newcommand{\blindlistlistoptional}{
-\blind@optionaltrue
-\blindlistlist
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blindlistlistoptional}
-%
-% \begin{macro}{\blinditemize}
-% \begin{macro}{\blindenumerate}
-% Some default macros for the standard environments.
-% \begin{macrocode}
-\newcommand{\blinditemize}{\blindlist{itemize}}
-\newcommand{\blindenumerate}{\blindlist{enumerate}}
-% \end{macrocode}
-% \end{macro}%^^A{\blinditemize}
-% \end{macro}%^^A{\blindenumerate}
-%
-% \verb|\Blindlist[x]| write a list with $x$ items.
-% The default is stored in the counter \verb|blindlist|. This value
-% can be changed with \verb|\setcounter{blindlist}{1}|.
-%
-%
-% \begin{macro}{\Blindlist}
-% \begin{macrocode}
-\newcommand{\Blindlist}[1]{
-\blind@longtrue
-\blindlist{#1}
-}
-% \end{macrocode}
-% \end{macro}%^^A{\Blindlist}
-%
-% \begin{macro}{\Blinditemize}
-% \begin{macro}{\Blindenumerate}
-% Some default macros for the standard environments.
-% \begin{macrocode}
-\newcommand{\Blinditemize}{\Blindlist{itemize}}
-\newcommand{\Blindenumerate}{\Blindlist{enumerate}}
-% \end{macrocode}
-% \end{macro}%^^A{\Blinditemize}
-% \end{macro}%^^A{\Blindenumerate}
-%
-% \begin{macro}{\blindlistoptional}
-% Here we start a list with \verb|\item[]|. So we set the flag for optional
-% parameter and start the normal list.
-% \begin{macrocode}
-\newcommand{\blindlistoptional}[1]{
-\blind@optionaltrue
-\blindlist{#1}
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blindlistoptional}
-%
-% \begin{macro}{\Blindlistoptional}
-% Now a big list with optional parameter at \verb|\item|.
-% \begin{macrocode}
-\newcommand{\Blindlistoptional}[1]{
-\blind@optionaltrue
-\blind@longtrue
-\blindlist{#1}
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blindlistoptional}
-%
-% \begin{macro}{\blinddescription}
-% \begin{macro}{\Blinddescription}
-% Some default macros for the standard environment description.
-% \begin{macrocode}
-\newcommand{\blinddescription}{\blindlistoptional{description}}
-\newcommand{\Blinddescription}{\Blindlistoptional{description}}
-\newcounter{listcount}
-\newcounter{blind@levelcount}
-% \end{macrocode}
-% \end{macro}%^^A{\blinddescription}
-% \end{macro}%^^A{\Blinddescription}
-%
-% \begin{macro}{\blind@items}
-% Here the \verb|\item| are written.
-% A local counter is defined and the \verb|\item| is written. The
-% type of \verb|\item| is influenced by the flags.
-% \begin{macrocode}
-\newcommand{\blind@items}{
-\setcounter{listcount}{1}
-\loop
-\ifblind@optional
- \ifblind@long
- \item[\blindtext@countitem] \blindtext@text
- \else
- \item[\blindtext@count] \blindtext@item
- \fi
-\else%\blind@optionalfalse
- \ifblind@long
- \item \blindtext@text
- \else
- \item \blindtext@countitem
- \fi
-\fi%\ifblind@optional
-% \end{macrocode}
-% Loop for cascaded lists.
-% \changes{V1.3}{2003-05-18}{Cascaded lists}
-% \begin{macrocode}
-{\loop
- \ifnum\value{blindlistlevel}>\value{blindlist@level}
- \addtocounter{blind@levelcount}{1}
- \blind@list[\value{blindlist}]\relax
- \addtocounter{blind@levelcount}{-1}
- \setcounter{listcount}{1}
-\repeat}
-\ifnum\value{listcount}<\value{blindlist}\addtocounter{listcount}{1}
-% \end{macrocode}
-% Correction for nested values.
-% \begin{macrocode}
-% \end{macrocode}
-% Close the loop
-% \begin{macrocode}
-\repeat
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blind@item}
-%% ^^A-----------------------------------------------------------
-% \section{A sample document}
-% \begin{macro}{\blinddocument}
-% \verb|\blinddocument| adds a document with \verb|\chapter|,
-% \verb|\section|\ldots, texts and lists (itemize, enumerate,
-% description).
-% \begin{macrocode}
-\newcommand{\blinddocument}{
-\@ifundefined{chapter}{}{%
- \chapter{\blindtext@heading 0 (chapter)}\blindtext%
- }
-\section{ \blindtext@heading 1 (section)} \blindtext
-\subsection{ \blindtext@heading 2 (subsection)} \blindtext
-\subsubsection{ \blindtext@heading 3 (subsubsection)} \blindtext
-\paragraph{ \blindtext@heading 4 (paragraph)} \blindtext
-\section{\blindtext@list}
-\subsection{\blindtext@listEx (itemize)}
- \blinditemize
- \subsubsection{\blindtext@listEx (4*itemize)}
- \blindlistlist{itemize}[2]
-\subsection{\blindtext@listEx (enumerate)}
- \blindenumerate
- \subsubsection{\blindtext@listEx (4*enumerate)}
- \blindlistlist{enumerate}[2]
-\subsection{\blindtext@listEx (description)}
- \blinddescription
- \subsubsection{\blindtext@listEx (4*description)}
- \blindlistlistoptional{description}[2]
-}
-% \end{macrocode}
-% \end{macro}%^^A{\blinddocument}
-%
-% \begin{macro}{\Blinddocument}
-% \verb|\blinddocument| adds a document with \verb|\chapter|,
-% \verb|\section|\ldots, texts and lists (itemize, enumerate,
-% description).
-% \begin{macrocode}
-\newcommand{\Blinddocument}{
-\@ifundefined{chapter}{}{%
- \chapter{\blindtext@heading 0 (chapter)}\blindtext%
- }
-\section{ \blindtext@heading 1 (section)} \Blindtext
-\subsection{ \blindtext@heading 2 (subsection)} \Blindtext
-\subsubsection{ \blindtext@heading 3 (subsection)} \Blindtext
-\paragraph{ \blindtext@heading 4 (paragraph)} \Blindtext
-\section{\blindtext@list}
-\subsection{\blindtext@listEx (itemize)}
- \Blinditemize
- \subsubsection{\blindtext@listEx (4*itemize)}
- \blind@longtrue
- \blindlistlist{itemize}[2]
-\subsection{\blindtext@listEx (enumerate)}
- \Blindenumerate
- \subsubsection{\blindtext@listEx (4*enumerate)}
- \blind@longtrue
- \blindlistlist{enumerate}[2]
-\subsection{\blindtext@listEx (description)}
- \Blinddescription
- \subsubsection{\blindtext@listEx (4*description)}
- \blind@longtrue
- \blindlistlistoptional{description}[2]
-}
-% \end{macrocode}
-% \end{macro}%^^A{\Blinddocument}
-%
-%% ^^A-----------------------------------------------------------
-% \section{The texts}
-% \begin{macro}{\addto}
-% If babel is not loaded, we need the command \verb|\addto|.
-% \begin{macrocode}
-%\providecommand{\addto}[2]{#2}
-\@ifundefined{addto}{
-\@ifpackageloaded{babel}{}{
-\PackageWarning{blindtext}{%
-You are not using babel.sty -> Language by random\MessageBreak
-Kein babel.sty verwendet -> Zufallssprache}}
-\newcommand{\addto}[2]{#2}
-}{}
-% \end{macrocode}
-% \end{macro}%^^A\addto
-%
-% \subsection{Default without language}
-% First all texts without any language. If you make a new translation, please
-% define all this macros.
-% \begin{macrocode}
-\def\blindtext@text{Text}
-\def\blindtext@count{\ifcase\blind@listitem\or
- First\or Second %...
- \else Last\blind@listitem=0\fi
- \global\advance\blind@listitem by 1
-}%\blindtext@count}
-\def\blindtext@item{itemtext}
-\def\blindtext@countitem{\blindtext@count\ \blindtext@item}
-\def\blindtext@heading{Heading on level\xspace}
-\def\blindtext@list{Lists}
-\def\blindtext@listEx{Example for list\xspace}
-% \end{macrocode}
-%
-% \subsection{English Texts}
-% \begin{macrocode}
-\addto\extrasenglish{
-\def\blindtext@text{
-Hello, here is some text without a meaning. This text should show,
-how a printed text will look like at this place. If you read this
-text, you will get no information. Really? Is there no
-information? Is there a difference between this text and some
-nonsense like \frqq Huardest gefburn\flqq? Kjift -- Never mind! A
-blind text like this gives you information about the selected
-font, how the letters are written and the impression of the look.
-This text should contain all letters of the alphabet and it should
-be written in of the original language. There is no need for a
-special contents, but the length of words should match to the
-language.}%\blindtext@text
-}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasenglish{
-\def\blindtext@count{\ifcase\value{listcount}\or
- First\or Second \or Third \or Fourth\or Fivth\or
- Sixth\or Seventh\or Eighth \or Ninth\or Tenth\or
- Eleventh\or Twelfth
- \else Another
- \fi
-}%\blindtext@count
-\def\blindtext@item{item in a list} %, level~\arabic{blindlist@level}}
-} %\addto\extrasenglish
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasenglish{
- \def\blindtext@heading{Heading on level\xspace}
- \def\blindtext@list{Lists}
- \def\blindtext@listEx{Example for list\xspace}
-} %\addto\extrasenglish
-%
-% \end{macrocode}
-% \subsection{German Texts}
-%
-% \begin{macrocode}
-\addto\extrasgerman{
-\def\blindtext@text{
-Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
-diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
-Grauwert der Schrift an. Ist das wirklich so? Ist es
-gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
-Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
-mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
-ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
-harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
-oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
-verschiedene Buchstaben enthalten und in der Originalsprache
-gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
-sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
-nicht dem eigentlichen Zweck, da sie eine
-falsche Anmutung vermitteln.}%\blindtext@text
-}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasgerman{
-\def\blindtext@count{\ifcase\value{listcount}\or
- Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
- Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
- Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter
- \else Noch ein\fi
-}%\blindtext@count
-\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
-}% %\addto\extrasgerman
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasgerman{
- \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
- \def\blindtext@list{Listen}
- \def\blindtext@listEx{Beispiel einer Liste\xspace}
-} %\addto\extrasgerman
-%
-% If the packet \Lpack{german} is loaded, select the language.
-% \begin{macrocode}
-\@ifpackageloaded{german}{\selectlanguage{german}}{}
-% \end{macrocode}
-%
-% \subsection{German - New typesetting}
-% \begin{macrocode}
-\addto\extrasngerman{
-\def\blindtext@text{
-Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
-diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
-Grauwert der Schrift an. Ist das wirklich so? Ist es
-gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
-Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
-mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
-ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
-harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
-oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
-verschiedene Buchstaben enthalten und in der Originalsprache
-gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
-sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
-nicht dem eigentlichen Zweck, da sie eine
-falsche Anmutung vermitteln.}%\blindtext@text
-}
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasngerman{
-\def\blindtext@count{\ifcase\value{listcount}\or
- Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
- Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
- Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter
- \else Noch ein\fi
-}%\blindtext@count
-\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
-}% %\addto\extrasgerman
-% \end{macrocode}
-%
-% \begin{macrocode}
-\addto\extrasngerman{
- \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
- \def\blindtext@list{Listen}
- \def\blindtext@listEx{Beispiel einer Liste\xspace}
-} %\addto\extrasngerman
-%
-% If the packet \Lpack{ngerman} is loaded, select the language.
-% \begin{macrocode}
-\@ifpackageloaded{ngerman}{\selectlanguage{ngerman}}{}
-% \end{macrocode}
-%
-% \section{Some other macros}
-% \changes{V1.2b}{2001/05/25}{Add macros vieltext and alotoftext}
-% \begin{macro}{\alotoftext}
-% \begin{macrocode}
-\let\alotoftext=\blindtext
-% \end{macrocode}
-% \end{macro}%^^A\alotoftext
-%
-% \Finale
-% \PrintIndex
-% \end{document}
-%</package>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:15:29 +0000