diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/everysel/everysel.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/everysel/everysel.dtx | 395 |
1 files changed, 0 insertions, 395 deletions
diff --git a/Master/texmf-dist/source/latex/everysel/everysel.dtx b/Master/texmf-dist/source/latex/everysel/everysel.dtx deleted file mode 100644 index cb6e315c81c..00000000000 --- a/Master/texmf-dist/source/latex/everysel/everysel.dtx +++ /dev/null @@ -1,395 +0,0 @@ -% \iffalse -\NeedsTeXFormat{LaTeX2e}[1995/12/01] -%<package>\ProvidesPackage{everysel} -%<package> [1999/06/08 v1.03 EverySelectfont Package (MS)] -% -%<*driver> -\ProvidesFile{everysel.drv} - [1999/06/08 v1.03 Driver for EverySelectfont Package (MS)] -\documentclass{ltxdoc} -\usepackage{url} -\usepackage[toc]{multitoc} -\usepackage{everysel} -\GetFileInfo{everysel.sty} -\RecordChanges % Gather update information -\EnableCrossrefs -%%\DisableCrossrefs% Say \DisableCrossrefs if index is ready -\CodelineIndex % Index code by line number -\OnlyDescription % comment out for implementation details -%%\OldMakeIndex % use if your MakeIndex is pre-v2.9 -\setcounter{IndexColumns}{2} -\setlength{\IndexMin}{40ex} -\setlength{\columnseprule}{.4pt} -\addtolength{\oddsidemargin}{1cm} -\addtolength{\textwidth}{-1cm} -\raggedright % otherwise we get over/underfull hboxes -\begin{document} - \DocInput{everysel.dtx} -\end{document} -%</driver> -% -% Copyright (C) [1996..1999] by Martin Schr\"oder. All rights reserved. -% -% This program may be redistributed and/or modified under the terms -% of the LaTeX Project Public License, either version 1.0 of this -% license, or (at your option) any later version. -% The latest version of this license is in -% CTAN:macros/latex/base/lppl.txt. -% -% Happy users are requested to send me a postcard. :-) -% -% For error reports in case of UNCHANGED versions see everysel.ins -% -% \fi -% -% \CheckSum{105} -% -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -% \iffalse meta-comment -%% ==================================================================== -%% @LaTeX-style-file{ -%% author = {Martin Schr\"oder}, -%% version = "1.03", -%% date = "8 June 1999", -%% filename = "everysel.sty", -%% address = {Martin Schr\"oder -%% Cr\"usemannallee 3 -%% D-28213 Bremen}, -%% telephone = "+49-421-2239425", -%% email = "Martin.Schroeder@ACM.org", -%% pgp-Key = "2048 bit / KeyID 292814E5", -%% pgp-fingerprint = "7E86 6EC8 97FA 2995 82C3 FEA5 2719 090E", -% checksum = "06457 414 1509 13717", -% codetable = "ISO/ASCII", -% keywords = "LaTeX, NFSS", -% supported = "yes", -%% docstring = "LaTeX package which provides hooks into -%% \cs{selectfont}. -% -% The checksum field above contains a CRC-16 -% checksum as the first value, followed by -% the equivalent of the standard UNIX wc -% (word count) utility output of lines, -% words, and characters. This is produced -% by Robert Solovay's checksum utility." -%% } -%% ==================================================================== -%\fi -% -% \changes{v1.00}{1996-05-24}{New} -% \changes{v1.02}{1998-04-11}{Minor documentation enhancements} -% \changes{v1.02}{1998-08-09}{Minor documentation enhancements} -% \changes{v1.03}{1999/06/08}{Moved to LPPL} -% -% -% ^^A ----------------------------- -% -% \pagestyle{headings} -% -% \newcommand*{\file}[1]{\texttt{#1}} -% \newcommand*{\package}[1]{\textsf{#1}} -% \hyphenation{every-select-font} -% -% -% ^^A ----------------------------- -% -% \changes{v1.01}{1997-03-09}{Fixed use of \cs{newline} in title.} -% \title{\unskip -% The \package{EverySel} package^^A -% \thanks{^^A -% The version number of this file is \fileversion, -% last revised \filedate.\protect\newline -% The name \textsf{EverySel} is a tribute to the $8+3$ -% file-naming convention of certain ``operating -% systems'' and their ``file systems''; strictly -% speaking it should be \textsf{EverySelectfont}.}^^A -% } -% \author{Martin Schr\"oder\\[0.5ex] -% \normalsize Cr\"usemannallee 3\\ -% \normalsize D-28213 Bremen\\ -% \normalsize Martin.Schroeder@ACM.org\\ -% \scriptsize \texttt{PGP-Key: 2048 bit / KeyID 292814E5}\\[-0.5em] -% \scriptsize \texttt{7E86 6EC8 97FA 2995~~82C3 FEA5 2719 090E}} -% \date{\filedate} -% \maketitle -% -% -% ^^A ----------------------------- -% -% -% \begin{abstract} -% This packages provides hooks into the NFSS-command -% \cs{selectfont} called \cs{EverySelectfont} and -% \cs{AtNextSelectfont} analogous to \cs{AtBeginDocument}. -% \end{abstract} -% -% \pagestyle{headings} -% -% -% ^^A ----------------------------- -% -% \tableofcontents -% -% -% ^^A ----------------------------- -% -% \section{Introduction} -% ^^A -% This package provides the hooks \cs{EverySelectfont} and -% \cs{AtNextSelectfont} whose arguments are executed just after -% \LaTeX{} has loaded a new font using \cs{selectfont} (which means -% that it will be executed after \emph{every} font loaded via NFSS). -% -% An example application would be a package for setting ragged text -% which needs to distiguinsh between monospaced and proportional -% fonts. -% Such a package exists: \package{ragged2e}\cite{package:ragged2e}. -% -% -% ^^A ----------------------------- -% -% \section{Usage} -% ^^A -% \DescribeMacro{\EverySelectfont} -% \cs{EverySelectfont}\marg{code} declares -% \mbox{$\langle$\emph{code}$\rangle$} that is saved internally -% and executed just after \emph{each} \cs{selectfont}. -% -% \emph{Warning:} The \mbox{$\langle$\emph{code}$\rangle$} is saved -% globally; there is currently no way to remove it. -% -% \DescribeMacro{\AtNextSelectfont} -% \cs{AtNextSelectfont}\marg{code} declares -% \mbox{$\langle$\emph{code}$\rangle$} that is saved internally -% and executed just after \emph{and only the next} \cs{selectfont}. -% -% Repeated use of the commands is permitted: the code in their -% argument is stored (and executed) in the order of their -% declarations. -% -% The argument of \cs{AtNextSelectfont} is executed \emph{after} -% the argument of \cs{EverySelectfont}. -% -% -% ^^A ----------------------------- -% -% \section{Options} -% ^^A -% The package has no options. -% -% -% ^^A ----------------------------- -% -% \section{Required packages} -% ^^A -% The package requires no further packages. -% -% -% ^^A ----------------------------- -% -% \StopEventually{^^A -% -% -% ^^A ----------------------------- -% -% \section{Acknowledgements} -% ^^A -% David Carlisle provided the solution for my problems with \cs{CheckCommand}. -% -% -% ^^A ----------------------------- -% -% \begin{thebibliography}{1} -% \raggedright -% \bibitem{package:tracefnt} -% Frank Mittelbach and Rainer Sch\"opf. -% \newblock The \package{tracefnt} package for use with the new -% font selection scheme. -% \newblock \url{CTAN: tex-archive/macros/latex/base/ltfsstrc.dtx}. -% \newblock \LaTeXe{} package. -% \bibitem{package:ragged2e} -% Martin Schr\"oder. -% \newblock The \package{ragged2e} package. -% \newblock \url{CTAN: tex-archive/macros/latex/contrib/supported/ms/ragged2e.dtx}. -% \newblock \LaTeXe{} package. -% \end{thebibliography} -% -% } -% -% -% ^^A ----------------------------- -% -% \section{The implementation} -% ^^A -% \begin{macrocode} -%<*package> -% \end{macrocode} -% -% -% ^^A ----------------------------- -% -% \subsection{Allocations} -% ^^A -% First we allocate the hooks -% \begin{macro}{\@EverySelectfont@EveryHook} -% The code to be executed just after the normal \cs{selectfont}. -% \begin{macrocode} -\newcommand{\@EverySelectfont@EveryHook}{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@EverySelectfont@AtNextHook} -% The code to be executed just after the normal \cs{selectfont} -% and \cs{@EverySelectfont@EveryHook}. -% \begin{macrocode} -\newcommand{\@EverySelectfont@AtNextHook}{} -% \end{macrocode} -% \end{macro} -% -% -% ^^A ----------------------------- -% -% \subsection{The user-visible commands} -% ^^A -% \begin{macro}{\EverySelectfont} -% \begin{macro}{\AtNextSelectfont} -% These commands are modeled after \cs{AtBeginDocument}. -% \begin{macrocode} -\newcommand*{\EverySelectfont}[1] - {\g@addto@macro\@EverySelectfont@EveryHook{#1}} -\newcommand*{\AtNextSelectfont}[1] - {\g@addto@macro\@EverySelectfont@AtNextHook{#1}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% -% ^^A ----------------------------- -% -% \subsection{Inserting the hooks} -% ^^A -% The hooks are placed \emph{inside} \cs{selectfont}. -% Unfortunately for us there are \emph{two} versions of -% \cs{selectfont} in normal \LaTeX: One is defined in the kernel and -% the other by the package \package{tracefnt}\cite{package:tracefnt}. -% So we have to check for two versions. -% \begin{macro}{\@EverySelectfont@Init} -% We do this in the macro \cs{@EverySelectfont@Init}, which is -% executed just after \cs{begin\{document\}} (with the aid of -% \cs{AtBeginDocument}), when we know for sure which version of -% \cs{selectfont} we have to overload. -% \begin{macrocode} -\newcommand*{\@EverySelectfont@Init}{% -% \end{macrocode} -% We have to distinguish two cases: \package{tracefnt} and -% no \package{tracefnt}. -% \begin{macrocode} - \@ifpackageloaded{tracefnt}{% -% \end{macrocode} -% And we have a problem: \cs{selectfont} is defined using -% \cs{DeclareRobustCommand}, which really defines -% \cs{selectfont\textvisiblespace}. -% So instead of simply using \cs{CheckCommand} we also have to use -% \cs{expandafter} and \cs{csname}\ldots\cs{endcsname}. -% \begin{macrocode} - \expandafter\CheckCommand\csname selectfont \endcsname{% - \ifx\f@linespread\baselinestretch \else - \set@fontsize\baselinestretch\f@size\f@baselineskip \fi - \xdef\font@name{% - \csname\curr@fontshape/\f@size\endcsname}% - \pickup@font - \font@name - \ifnum \tracingfonts>\tw@ - \@font@info{Switching to \font@name}\fi - \size@update - \enc@update - }% - }{% -% \end{macrocode} -% Now the case without \package{tracefnt}. -% \begin{macrocode} - \expandafter\CheckCommand\csname selectfont \endcsname{% - \ifx\f@linespread\baselinestretch \else - \set@fontsize\baselinestretch\f@size\f@baselineskip \fi - \xdef\font@name{% - \csname\curr@fontshape/\f@size\endcsname}% - \pickup@font - \font@name - \size@update - \enc@update - }% - }% -% \end{macrocode} -% After the checks we can be sure we have the correct version of -% \cs{selectfont}, so we redefine it with our hooks. -% \begin{macrocode} - \DeclareRobustCommand{\selectfont}% - {% - \ifx\f@linespread\baselinestretch \else - \set@fontsize\baselinestretch\f@size\f@baselineskip \fi - \xdef\font@name{% - \csname\curr@fontshape/\f@size\endcsname}% - \pickup@font - \font@name - \@EverySelectfont@EveryHook - \@EverySelectfont@AtNextHook -% \end{macrocode} -% We have to reset \cs{@EverySelectfont@AtNextHook} after each use. -% \begin{macrocode} - \gdef\@EverySelectfont@AtNextHook{}% - \size@update - \enc@update - }% -% \end{macrocode} -% The additions of \package{tracefnt} to \cs{selectfont} can be -% implemented using \cs{EverySelectfont}. -% \begin{macrocode} - \@ifpackageloaded{tracefnt}{% - \EverySelectfont{% - \ifnum \tracingfonts>\tw@ - \@font@info{Switching to \font@name}\fi}% - }{}% -% \end{macrocode} -% Since \cs{@EverySelectfont@Init} should only be used once it is -% self-destructing. -% \begin{macrocode} - \let\@EverySelectfont@Init\undefined - } -% \end{macrocode} -% Finally we insert \cs{EverySelectfont@Init} into \cs{begin\{document\}}. -% \begin{macrocode} -\AtBeginDocument{\@EverySelectfont@Init} -% \end{macrocode} -% \end{macro} -% -% -% ^^A ----------------------------- -% -% \begin{macrocode} -%</package> -% \end{macrocode} -% -% -% ^^A ----------------------------- -% -% \Finale -% -% ^^A Print the indices but make sure that they are not printed twice -% ^^A (ltxdoc.cfg might have a second \PrintIndex command) -% \PrintIndex\PrintChanges\let\PrintChanges\relax\let\PrintIndex\relax -% |