diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/datetime2-latin')
-rw-r--r-- | Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.dtx | 500 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.ins | 38 |
2 files changed, 538 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.dtx b/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.dtx new file mode 100644 index 00000000000..879a041fbe3 --- /dev/null +++ b/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.dtx @@ -0,0 +1,500 @@ +%\iffalse +%<*package> +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%</package> +%\fi +% \iffalse +% Doc-Source file to use with LaTeX2e +% Copyright (C) 2015 Nicola Talbot, all rights reserved. +% (New maintainer add relevant lines here.) +% \fi +% \iffalse +%<*driver> +\documentclass{ltxdoc} + +\usepackage{alltt} +\usepackage{graphicx} +\usepackage[utf8]{inputenc} +\usepackage[T1]{fontenc} +\usepackage[colorlinks, + bookmarks, + hyperindex=false, + pdfauthor={Nicola L.C. Talbot}, + pdftitle={datetime2.sty Latin Module}]{hyperref} + + +\CheckSum{212} + +\renewcommand*{\usage}[1]{\hyperpage{#1}} +\renewcommand*{\main}[1]{\hyperpage{#1}} +\IndexPrologue{\section*{\indexname}\markboth{\indexname}{\indexname}} +\setcounter{IndexColumns}{2} + +\newcommand*{\sty}[1]{\textsf{#1}} +\newcommand*{\opt}[1]{\texttt{#1}\index{#1=\texttt{#1}|main}} + +\RecordChanges +\PageIndex +\CodelineNumbered + +\begin{document} +\DocInput{datetime2-latin.dtx} +\end{document} +%</driver> +%\fi +% +%\MakeShortVerb{"} +% +%\title{Latin Module for datetime2 Package} +%\author{Nicola L. C. Talbot (inactive)} +%\date{2015-03-31 (v1.0)} +%\maketitle +% +%This module is currently unmaintained and may be subject to change. +%If you want to volunteer to take over maintanance, contact me at +%\url{http://www.dickimaw-books.com/contact.html} +% +%\begin{abstract} +%This is the Latin language module for the \sty{datetime2} +%package. If you want to use the settings in this module you must +%install it in addition to installing \sty{datetime2}. If you use +%\sty{babel} or \sty{polyglossia}, you will need this module to +%prevent them from redefining \cs{today}. The \sty{datetime2} +% \opt{useregional} setting must be set to "text" or "numeric" +% for the language styles to be set. +% Alternatively, you can set the style in the document using +% \cs{DTMsetstyle}, but this may be changed by \cs{date}\meta{language} +% depending on the value of the \opt{useregional} setting. +%\end{abstract} +% +%I've copied the date style from \texttt{babel-latin}'s \cs{today}. +%This is different from \sty{polyglossia}'s Latin \cs{today} so +%there's a check to see if \sty{polyglossia} has been loaded to make +%the styles match. +% +%I don't know if these settings are correct. +%In particular, I don't know if the "latin" time style is +%correct. Currently this just uses the "default" time style. Please +%be aware that this may change. Whoever takes over maintanance +%of this module may can change it as appropriate. +% +%The new maintainer should add the line: +%\begin{verbatim} +% The Current Maintainer of this work is Name. +%\end{verbatim} +%to the preamble part in \texttt{datetime2-latin.ins} where Name +%is the name of the maintainer(s) and replace +%the `inactive' status to `maintained'. +% +%Currently there is only a regionless style. +% +%\StopEventually{% +%\clearpage +%\phantomsection +%\addcontentsline{toc}{section}{Change History}% +%\PrintChanges +%\addcontentsline{toc}{section}{\indexname}% +%\PrintIndex} +%\section{The Code} +%At the moment there is only the one ".ldf" file. +% +%\subsection{Main Latin Module (\texttt{datetime2-latin.ldf})} +%\changes{1.0}{2015-03-31}{Initial release} +% +%\iffalse +% \begin{macrocode} +%<*datetime2-latin.ldf> +% \end{macrocode} +%\fi +% +% Identify Module +% \begin{macrocode} +\ProvidesDateTimeModule{latin}[2015/03/31 v1.0] +% \end{macrocode} +% +%\begin{macro}{\DTMlatindatefont} +%\sty{polyglossia} version doesn't implement a font change. +% \begin{macrocode} +\@ifpackageloaded{polyglossia} +{ + \newcommand*{\DTMlatindayfont}[1]{#1} +} +{ +% \end{macrocode} +%This will need protecting. +% \begin{macrocode} + \newcommand*{\DTMlatindayfont}[1]{% + {\check@mathfonts\fontsize\sf@size\z@\math@fontsfalse\selectfont#1}% + } +} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatinordinal} +% \begin{macrocode} +\newcommand*{\DTMlatinordinal}[1]{% + \DTMtexorpdfstring + {% + \protect\DTMlatindayfont{\uppercase\expandafter{\romannumeral#1}}% + }% + {\romannumeral#1 }% +} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatinyear} +% \begin{macrocode} +\newcommand*{\DTMlatinyear}[1]{% + \DTMtexorpdfstring + {% + \uppercase\expandafter{\romannumeral#1}% + }% + {\romannumeral#1 }% +} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatinmonthname} +% Latin month names. +% \begin{macrocode} +\@ifpackageloaded{polyglossia} +{ +% \end{macrocode} +% Match \sty{polyglossia} month names: +% \begin{macrocode} + \newcommand*{\DTMlatinmonthname}[1]{% + \ifcase#1 + \or + Januarii% + \or + Februarii% + \or + Martii% + \or + Aprilis% + \or + Maji% + \or + Junii% + \or + Julii% + \or + Augusti% + \or + Septembris% + \or + Octobris% + \or + Novembris% + \or + Decembris% + \fi + } +} +{ +% \end{macrocode} +% Match \sty{babel} month names: +% \begin{macrocode} + \newcommand*{\DTMlatinmonthname}[1]{% + \ifcase#1 + \or + Ianuarii% + \or + Februarii% + \or + Martii% + \or + Aprilis% + \or + Maii% + \or + Iunii% + \or + Iulii% + \or + Augusti% + \or + Septembris% + \or + Octobris% + \or + Novembris% + \or + Decembris% + \fi + } +} +% \end{macrocode} +%\end{macro} +% +% +% Define the \texttt{latin} style. +% The time style is the same as the "default" style +% provided by \sty{datetime2}. This may need correcting. +% +% Allow the user a way of configuring the "latin" and +% "latin-numeric" styles. This doesn't use the package wide +% separators such as +% \cs{dtm@datetimesep} in case other date formats are also required. +%\begin{macro}{\DTMlatindaymonthsep} +% The separator between the day and month for the text format. +% \begin{macrocode} +\newcommand*{\DTMlatindaymonthsep}{\space} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatinmonthyearsep} +% The separator between the month and year for the text format. +% \begin{macrocode} +\newcommand*{\DTMlatinmonthyearsep}{\space} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatindatetimesep} +% The separator between the date and time blocks in the full format +% (either text or numeric). +% \begin{macrocode} +\newcommand*{\DTMlatindatetimesep}{\space} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatintimezonesep} +% The separator between the time and zone blocks in the full format +% (either text or numeric). +% \begin{macrocode} +\newcommand*{\DTMlatintimezonesep}{\space} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatindatesep} +% The separator for the numeric date format. +% \begin{macrocode} +\newcommand*{\DTMlatindatesep}{/} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\DTMlatintimesep} +% The separator for the numeric time format. +% \begin{macrocode} +\newcommand*{\DTMlatintimesep}{:} +% \end{macrocode} +%\end{macro} +% +%Provide keys that can be used in \cs{DTMlangsetup} to set these +%separators. +% \begin{macrocode} +\DTMdefkey{latin}{daymonthsep}{\renewcommand*{\DTMlatindaymonthsep}{#1}} +\DTMdefkey{latin}{monthyearsep}{\renewcommand*{\DTMlatinmonthyearsep}{#1}} +\DTMdefkey{latin}{datetimesep}{\renewcommand*{\DTMlatindatetimesep}{#1}} +\DTMdefkey{latin}{timezonesep}{\renewcommand*{\DTMlatintimezonesep}{#1}} +\DTMdefkey{latin}{datesep}{\renewcommand*{\DTMlatindatesep}{#1}} +\DTMdefkey{latin}{timesep}{\renewcommand*{\DTMlatintimesep}{#1}} +% \end{macrocode} +% +% TODO: provide a boolean key to switch between full and abbreviated +% formats if appropriate. (I don't know how the date should be +% abbreviated.) +% +% Define a boolean key that determines if the time zone mappings +% should be used. +% \begin{macrocode} +\DTMdefboolkey{latin}{mapzone}[true]{} +% \end{macrocode} +% The default is to use mappings. +% \begin{macrocode} +\DTMsetbool{latin}{mapzone}{true} +% \end{macrocode} +% +% Define a boolean key that determines if the day of month should be +% displayed. +% \begin{macrocode} +\DTMdefboolkey{latin}{showdayofmonth}[true]{} +% \end{macrocode} +% The default is to show the day of month. +% \begin{macrocode} +\DTMsetbool{latin}{showdayofmonth}{true} +% \end{macrocode} +% +% Define a boolean key that determines if the year should be +% displayed. +% \begin{macrocode} +\DTMdefboolkey{latin}{showyear}[true]{} +% \end{macrocode} +% The default is to show the year. +% \begin{macrocode} +\DTMsetbool{latin}{showyear}{true} +% \end{macrocode} +% +% Define the "latin" style. (TODO: implement day of week?) +% \begin{macrocode} +\DTMnewstyle + {latin}% label + {% date style + \renewcommand*\DTMdisplaydate[4]{% + \DTMifbool{latin}{showdayofmonth} + {\DTMlatinordinal{##3}\DTMlatindaymonthsep}% + {}% + \DTMlatinmonthname{##2}% + \DTMifbool{latin}{showyear}% + {% + \DTMlatinmonthyearsep + \DTMlatinyear{##1}% + }% + {}% + }% + \renewcommand*\DTMDisplaydate{\DTMdisplaydate}% + }% + {% time style (use default) + \DTMsettimestyle{default}% + }% + {% zone style + \DTMresetzones + \DTMlatinzonemaps + \renewcommand*{\DTMdisplayzone}[2]{% + \DTMifbool{latin}{mapzone}% + {\DTMusezonemapordefault{##1}{##2}}% + {% + \ifnum##1<0\else+\fi\DTMtwodigits{##1}% + \ifDTMshowzoneminutes\DTMlatintimesep\DTMtwodigits{##2}\fi + }% + }% + }% + {% full style + \renewcommand*{\DTMdisplay}[9]{% + \ifDTMshowdate + \DTMdisplaydate{##1}{##2}{##3}{##4}% + \DTMlatindatetimesep + \fi + \DTMdisplaytime{##5}{##6}{##7}% + \ifDTMshowzone + \DTMlatintimezonesep + \DTMdisplayzone{##8}{##9}% + \fi + }% + \renewcommand*{\DTMDisplay}{\DTMdisplay}% + }% +% \end{macrocode} +% +% Define numeric style. +% \begin{macrocode} +\DTMnewstyle + {latin-numeric}% label + {% date style + \renewcommand*\DTMdisplaydate[4]{% + \DTMifbool{latin}{showdayofmonth}% + {% + \number##3 % space intended + \DTMlatindatesep + }% + {}% + \number##2 % space intended + \DTMifbool{latin}{showyear}% + {% + \DTMlatindatesep + \number##1 % space intended + }% + {}% + }% + \renewcommand*{\DTMDisplaydate}{\DTMdisplaydate}% + }% + {% time style + \renewcommand*\DTMdisplaytime[3]{% + \number##1 + \DTMlatintimesep\DTMtwodigits{##2}% + \ifDTMshowseconds\DTMlatintimesep\DTMtwodigits{##3}\fi + }% + }% + {% zone style + \DTMresetzones + \DTMlatinzonemaps + \renewcommand*{\DTMdisplayzone}[2]{% + \DTMifbool{latin}{mapzone}% + {\DTMusezonemapordefault{##1}{##2}}% + {% + \ifnum##1<0\else+\fi\DTMtwodigits{##1}% + \ifDTMshowzoneminutes\DTMlatintimesep\DTMtwodigits{##2}\fi + }% + }% + }% + {% full style + \renewcommand*{\DTMdisplay}[9]{% + \ifDTMshowdate + \DTMdisplaydate{##1}{##2}{##3}{##4}% + \DTMlatindatetimesep + \fi + \DTMdisplaytime{##5}{##6}{##7}% + \ifDTMshowzone + \DTMlatintimezonesep + \DTMdisplayzone{##8}{##9}% + \fi + }% + \renewcommand*{\DTMDisplay}{\DTMdisplay}% + } +% \end{macrocode} +% +%\begin{macro}{\DTMlatinzonemaps} +% The time zone mappings are set through this command, which can be +% redefined if extra mappings are required or mappings need to be +% removed. This currently has no mappings. +% \begin{macrocode} +\newcommand*{\DTMlatinzonemaps}{% +} +% \end{macrocode} +%\end{macro} + +% Switch style according to the \opt{useregional} setting. +% \begin{macrocode} +\DTMifcaseregional +{}% do nothing +{\DTMsetstyle{latin}} +{\DTMsetstyle{latin-numeric}} +% \end{macrocode} +% +% Redefine \cs{datelatin} (or \cs{date}\meta{dialect}) to prevent +% \sty{babel} from resetting \cs{today}. (For this to work, +% \sty{babel} must already have been loaded if it's required.) +% \begin{macrocode} +\ifcsundef{date\CurrentTrackedDialect} +{% + \ifundef\datelatin + {% do nothing + }% + {% + \def\datelatin{% + \DTMifcaseregional + {}% do nothing + {\DTMsetstyle{latin}}% + {\DTMsetstyle{latin-numeric}}% + }% + }% +}% +{% + \csdef{date\CurrentTrackedDialect}{% + \DTMifcaseregional + {}% do nothing + {\DTMsetstyle{latin}}% + {\DTMsetstyle{latin-numeric}} + }% +}% +% \end{macrocode} +%\iffalse +% \begin{macrocode} +%</datetime2-latin.ldf> +% \end{macrocode} +%\fi +%\Finale +\endinput diff --git a/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.ins b/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.ins new file mode 100644 index 00000000000..112cf79667e --- /dev/null +++ b/Master/texmf-dist/source/latex/datetime2-latin/datetime2-latin.ins @@ -0,0 +1,38 @@ +\input docstrip + +\preamble + + datetime2-latin.dtx + Copyright 2015 Nicola Talbot + + This work may be distributed and/or modified under the + conditions of the LaTeX Project Public License, either version 1.3 + of this license of (at your option) any later version. + The latest version of this license is in + http://www.latex-project.org/lppl.txt + and version 1.3 or later is part of all distributions of LaTeX + version 2005/12/01 or later. + + This work has the LPPL maintenance status `inactive'. + + This work consists of the files datetime2-latin.dtx and + datetime2-latin.ins and the derived file + datetime2-latin.ldf. + +\endpreamble + +\askforoverwritefalse + +\generate +{% + \file + {datetime2-latin.ldf}% + {% + \usepreamble\defaultpreamble + \usepostamble\defaultpostamble + \from{datetime2-latin.dtx}{datetime2-latin.ldf,package}% + }% +} + +\endbatchfile + |