diff options
Diffstat (limited to 'Master/texmf-dist/source/generic/babel/czech.dtx')
-rw-r--r-- | Master/texmf-dist/source/generic/babel/czech.dtx | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/generic/babel/czech.dtx b/Master/texmf-dist/source/generic/babel/czech.dtx new file mode 100644 index 00000000000..16f72d3f9bc --- /dev/null +++ b/Master/texmf-dist/source/generic/babel/czech.dtx @@ -0,0 +1,276 @@ +% \iffalse meta-comment +% +% Copyright 1989-2005 Johannes L. Braams and any individual authors +% listed elsewhere in this file. All rights reserved. +% +% This file is part of the Babel system. +% -------------------------------------- +% +% It may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3 +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of LaTeX +% version 2003/12/01 or later. +% +% This work has the LPPL maintenance status "maintained". +% +% The Current Maintainer of this work is Johannes Braams. +% +% The list of all files belonging to the Babel system is +% given in the file `manifest.bbl. See also `legal.bbl' for additional +% information. +% +% The list of derived (unpacked) files belonging to the distribution +% and covered by LPPL is defined by the unpacking scripts (with +% extension .ins) which are part of the distribution. +% \fi +% \CheckSum{190} +% +% \iffalse +% Tell the \LaTeX\ system who we are and write an entry on the +% transcript. +%<*dtx> +\ProvidesFile{czech.dtx} +%</dtx> +%<code>\ProvidesLanguage{czech} +%\fi +%\ProvidesFile{czech.dtx} + [2005/03/29 v1.3k Czech support from the babel system] +%\iffalse +%% File `czech.dtx' +%% Babel package for LaTeX version 2e +%% Copyright (C) 1989 - 2005 +%% by Johannes Braams, TeXniek +% +%% Please report errors to: J.L. Braams +%% babel at braams.cistron.nl +% +% This file is part of the babel system, it provides the source +% code for the Czech language definition file. +% Contributions were made by Milos Lokajicek (LOKAJICK@CERNVM). +%<*filedriver> +\documentclass{ltxdoc} +\newcommand*\TeXhax{\TeX hax} +\newcommand*\babel{\textsf{babel}} +\newcommand*\langvar{$\langle \it lang \rangle$} +\newcommand*\note[1]{} +\newcommand*\Lopt[1]{\textsf{#1}} +\newcommand*\file[1]{\texttt{#1}} +\begin{document} + \DocInput{czech.dtx} +\end{document} +%</filedriver> +%\fi +% +% \GetFileInfo{czech.dtx} +% +% \changes{czech-1.0a}{1991/07/15}{Renamed babel.sty in babel.com} +% \changes{czech-1.1}{1992/02/15}{Brought up-to-date with babel 3.2a} +% \changes{czech-1.2}{1993/07/11}{Included some features from Kasal's +% czech.sty} +% \changes{czech-1.3}{1994/02/27}{Update for \LaTeXe} +% \changes{czech-1.3d}{1994/06/26}{Removed the use of \cs{filedate} +% and moved identification after the loading of \file{babel.def}} +% \changes{czech-1.3h}{1996/10/10}{Replaced \cs{undefined} with +% \cs{@undefined} and \cs{empty} with \cs{@empty} for consistency +% with \LaTeX, moved the definition of \cs{atcatcode} right to the +% beginning.} +% +% \section{The Czech language} +% +% The file \file{\filename}\footnote{The file described in this +% section has version number \fileversion\ and was last revised on +% \filedate. Contributions were made by Milos Lokajicek +% (\texttt{LOKAJICK@CERNVM}).} defines all the language definition +% macros for the Czech language. +% +% For this language |\frenchspacing| is set and two macros |\q| and +% |\w| for easy access to two accents are defined. +% +% The command |\q| is used with the letters (\texttt{t}, +% \texttt{d}, \texttt{l}, and \texttt{L}) and adds a \texttt{'} to +% them to simulate a `hook' that should be there. The result looks +% like t\kern-2pt\char'47. The command |\w| is used to put the +% ring-accent which appears in \aa ngstr\o m over the letters +% \texttt{u} and \texttt{U}. +% +% \StopEventually{} +% +% The macro |\LdfInit| takes care of preventing that this file is +% loaded more than once, checking the category code of the +% \texttt{@} sign, etc. +% \changes{czech-1.3h}{1996/11/02}{Now use \cs{LdfInit} to perform +% initial checks} +% \begin{macrocode} +%<*code> +\LdfInit{czech}\captionsczech +% \end{macrocode} +% +% When this file is read as an option, i.e. by the |\usepackage| +% command, \texttt{czech} will be an `unknown' language in which case +% we have to make it known. So we check for the existence of +% |\l@czech| to see whether we have to do something here. +% +% \changes{czech-1.0b}{1991/10/27}{Removed use of \cs{@ifundefined}} +% \changes{czech-1.1}{1992/02/15}{Added a warning when no hyphenation +% patterns were loaded.} +% \changes{czech-1.3d}{1994/06/26}{Now use \cs{@nopatterns} to produce +% the warning} +% \begin{macrocode} +\ifx\l@czech\@undefined + \@nopatterns{Czech} + \adddialect\l@czech0\fi +% \end{macrocode} +% +% The next step consists of defining commands to switch to (and +% from) the Czech language. +% +% \begin{macro}{\captionsczech} +% The macro |\captionsczech| defines all strings used in the four +% standard documentclasses provided with \LaTeX. +% \changes{czech-1.1}{1992/02/15}{Added \cs{seename}, \cs{alsoname} +% and \cs{prefacename}} +% \changes{czech-1.3f}{1995/07/04}{Added \cs{proofname} for AMS-\LaTeX} +% \changes{czech-1.3g}{1996/02/12}{Fixed two errors and provided +% translation for `proof'} +% \changes{czech-1.3j}{2000/09/19}{Added \cs{glossaryname}} +% \changes{czech-1.3k}{2004/02/18}{Added translation for Glossary} +% \begin{macrocode} +\addto\captionsczech{% + \def\prefacename{P\v redmluva}% + \def\refname{Reference}% + \def\abstractname{Abstrakt}% + \def\bibname{Literatura}% + \def\chaptername{Kapitola}% + \def\appendixname{Dodatek}% + \def\contentsname{Obsah}% + \def\listfigurename{Seznam obr\'azk\r{u}}% + \def\listtablename{Seznam tabulek}% + \def\indexname{Index}% + \def\figurename{Obr\'azek}% + \def\tablename{Tabulka}% + \def\partname{\v{C}\'ast}% + \def\enclname{P\v{r}\'{\i}loha}% + \def\ccname{Na v\v{e}dom\'{\i}:}% + \def\headtoname{Komu}% + \def\pagename{Strana}% + \def\seename{viz}% + \def\alsoname{viz tak\'e}% + \def\proofname{D\r{u}kaz}% + \def\glossaryname{Glos\'a\v r}% + }% +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\dateczech} +% The macro |\dateczech| redefines the command |\today| to produce +% Czech dates. +% \changes{czech-1.3i}{1997/10/01}{Use \cs{edef} to define \cs{today} +% to save memory} +% \changes{czech-1.3i}{1998/03/28}{use \cs{def} instead of \cs{edef}} +% \begin{macrocode} +\def\dateczech{% + \def\today{\number\day.~\ifcase\month\or + ledna\or \'unora\or b\v{r}ezna\or dubna\or kv\v{e}tna\or + \v{c}ervna\or \v{c}ervence\or srpna\or z\'a\v{r}\'{\i}\or + \v{r}\'{\i}jna\or listopadu\or prosince\fi + \space \number\year}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\extrasczech} +% \begin{macro}{\noextrasczech} +% The macro |\extrasczech| will perform all the extra definitions +% needed for the Czech language. The macro |\noextrasczech| is used +% to cancel the actions of |\extrasczech|. This means saving the +% meaning of two one-letter control sequences before defining them. +% +% \changes{czech-1.1a}{1992/07/07}{Removed typo, \cs{q} was restored +% twice, once too many.} +% \changes{czech-1.3e}{1995/03/15}{Use \LaTeX's \cs{v} and \cs{r} +% accent commands} +% \begin{macrocode} +\addto\extrasczech{\babel@save\q\let\q\v} +\addto\extrasczech{\babel@save\w\let\w\r} +% \end{macrocode} +% For Czech texts |\frenchspacing| should be in effect. We make +% sure this is the case and reset it if necessary. +% \changes{czech-1.3e}{1995/03/14}{now use \cs{bbl@frenchspacing} and +% \cs{bbl@nonfrenchspacing}} +% \begin{macrocode} +\addto\extrasczech{\bbl@frenchspacing} +\addto\noextrasczech{\bbl@nonfrenchspacing} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\v} +% \LaTeX's normal |\v| accent places a caron over the letter that +% follows it (\v{o}). This is not what we want for the letters d, +% t, l and L; for those the accent should change shape. This is +% acheived by the following. +% \begin{macrocode} +\AtBeginDocument{% + \DeclareTextCompositeCommand{\v}{OT1}{t}{% + t\kern-.23em\raise.24ex\hbox{'}} + \DeclareTextCompositeCommand{\v}{OT1}{d}{% + d\kern-.13em\raise.24ex\hbox{'}} + \DeclareTextCompositeCommand{\v}{OT1}{l}{\lcaron{}} + \DeclareTextCompositeCommand{\v}{OT1}{L}{\Lcaron{}}} +% \end{macrocode} +% +% \begin{macro}{\lcaron} +% \begin{macro}{\Lcaron} +% Fot the letters \texttt{l} and \texttt{L} we want to disinguish +% between normal fonts and monospaced fonts. +% \begin{macrocode} +\def\lcaron{% + \setbox0\hbox{M}\setbox\tw@\hbox{i}% + \ifdim\wd0>\wd\tw@\relax + l\kern-.13em\raise.24ex\hbox{'}\kern-.11em% + \else + l\raise.45ex\hbox to\z@{\kern-.35em '\hss}% + \fi} +\def\Lcaron{% + \setbox0\hbox{M}\setbox\tw@\hbox{i}% + \ifdim\wd0>\wd\tw@\relax + L\raise.24ex\hbox to\z@{\kern-.28em'\hss}% + \else + L\raise.45ex\hbox to\z@{\kern-.40em '\hss}% + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% The macro |\ldf@finish| takes care of looking for a +% configuration file, setting the main language to be switched on +% at |\begin{document}| and resetting the category code of +% \texttt{@} to its original value. +% \changes{czech-1.3h}{1996/11/02}{Now use \cs{ldf@finish} to wrap up} +% \begin{macrocode} +\ldf@finish{czech} +%</code> +% \end{macrocode} +% +% \Finale +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% +\endinput |