diff options
Diffstat (limited to 'Master/texmf-dist/doc')
37 files changed, 860 insertions, 602 deletions
diff --git a/Master/texmf-dist/doc/latex/circuit-macros/CHANGES b/Master/texmf-dist/doc/latex/circuit-macros/CHANGES index 466b2d8e44f..647e124d6bb 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/CHANGES +++ b/Master/texmf-dist/doc/latex/circuit-macros/CHANGES @@ -1,5 +1,6 @@ CHANGES +Version 10.4: New options for source, sarrow, darrow routines. Version 10.3: Tweaked sfg_init and NeedDpicTools functionality; macro lin_ang, langle, ACsymbol, DCsymbol, Ysymbol, Deltasymbol, Autologix. New macro polygon. diff --git a/Master/texmf-dist/doc/latex/circuit-macros/Copying b/Master/texmf-dist/doc/latex/circuit-macros/Copying index 6ab5c358956..7368181b7f4 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/Copying +++ b/Master/texmf-dist/doc/latex/circuit-macros/Copying @@ -1,4 +1,4 @@ -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/README b/Master/texmf-dist/doc/latex/circuit-macros/README index 43c6a847b31..2598327896e 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/README +++ b/Master/texmf-dist/doc/latex/circuit-macros/README @@ -1,5 +1,5 @@ -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/darrow.m4 b/Master/texmf-dist/doc/latex/circuit-macros/darrow.m4 index 4b29a48560d..c563a189dc2 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/darrow.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/darrow.m4 @@ -1,40 +1,42 @@ divert(-1) darrow.m4 Macros for double lines and arrows -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * * marked to distinguish them from this distribution. There is no warranty * * whatsoever for these files. * +` Some of these macros have uncomfortably many arguments for specifying + options, so wrappers beginning with upper-case letters (Dline, + Darrow, Darc) are provided and implement key=val;key=val... option + specifications. Sometimes however, cleaner code results from using + the original macros. Could these be written in a more straightforward + fashion? Probably, but the current versions have evolved from macros + written very early on and backward compatibility has been kept, with + only a few exceptions. -`Notes: these macros have been reworked (Jan 2013) so that dlthick is the - total outside width, consistent with solid lines and arrows, and to add - the !- and -! half-linethick line caps to simplify butting to boxes. - - Some of these macros have uncomfortably many arguments for specifying - options, so wrappers beginning with upper-case letters (Dline, Darrow, Darc) - are provided and implement key=val;key=val... option specifications. + The drawn elements are + darc darrow dend dleft dline dright dtee dturn + and there are wrappers + Darc Darrow Dline ' - -============================================================================= define(`darrow_') ifdef(`libgen_',,`include(libgen.m4)divert(-1)') +============================================================================= +# Style defaults: Default width (thickness) of double lines define(`dlthick',`(0.08*scale+lthick)') -#efine(`dlinewid',`dlthick') Obsolete, keep for a while for compatibility. `ELement fill color (default white) - e.g. define(`dfillcolor',`1,0.84,0') - Obsolete: - command "\definecolor{gold}{rgb}{1,0.84,0}" - define(`dfillcolor',gold)' -define(`dfillcolor',`1,1,1') + e.g. define(`dfillcolor',`1,0.84,0')' +define(`dfillcolor',`1,1,1') `=white' define(`dfillgrey',1) `fill shade for gpic' define(`darcrad',`dlthick*2') `default darc radius' +define(`dfillext',0.25bp__) `extended length of dtee, dleft, dright fill' `Default length:' ifdef(`elen_',,`define(`elen_',linewid*3/2)') @@ -53,103 +55,119 @@ define(`dbelow',`below ifelse(`$1',,`at Here',`$1')-(0,dlthick/2)') define(`dljust',`ljust ifelse(`$1',,`at Here',`$1')+(dlthick/2,0)') define(`drjust',`rjust ifelse(`$1',,`at Here',`$1')-(dlthick/2,0)') - `dline(linespec,start truncation,end truncation,dlthick, ends ) + `dline(linespec,start truncation,end truncation,dlthick, ends, + outline attributes, inner attributes ) ends= blank, x-x, -x, x-, where x means ! or |' define(`dline',`deleminit_(`$1',,`$4') - M4DL: line from last line.start to last line.end \ + M4DL: line invis from last line.start to last line.end \ chop ifelse(`$2',,0,m4dlthk/2) chop ifelse(`$3',,0,m4dlthk/2) - ifelse(rgbstring(1,1,1),"",, - `{line thick m4dlthk/(1bp__) from M4DL.start to M4DL.end } - {line thick m4dlthk/(1bp__)-2*linethick outlined rgbstring(dfillcolor) \ - from M4DL.start \ - ifinstr(`$5',|-,`+vec_(lthick,0)',`$5',!-,`+vec_(lthick/2,0)') \ + {line thick m4dlthk/(1bp__) `$6' from M4DL.start to M4DL.end } + ifelse(rgbstring(dfillcolor),"",, + `{line thick m4dlthk/(1bp__)-2*linethick \ + ifelse(`$7',,`outlined rgbstring(dfillcolor)',`$7') \ + from M4DL.start \ + ifinstr(`$5',|-,`+vec_(lthick,0)',`$5',!-,`+vec_(lthick/2,0)') \ to M4DL.end \ - ifinstr(`$5',-|,`-vec_(lthick,0)',`$5',-!,`-vec_(lthick/2,0)') }') + ifinstr(`$5',-|,`-vec_(lthick,0)',`$5',-!,`-vec_(lthick/2,0)') }') ifgpic(`M4dV: vec_(0,m4dlthk/2-lthick/2); shade(dfillgrey, {line from M4DL.start+(M4dV.x,M4dV.y) to M4DL.end+(M4dV.x,M4dV.y)} {line from M4DL.start-(M4dV.x,M4dV.y) to M4DL.end-(M4dV.x,M4dV.y)})') line invis from M4DL.start to M4DL.end') - `Dline(linespec,params) - params is a semicolon-separated list of items: - S truncate at start by dline thickness/2 - E truncate at end by dline thickness/2 - thick=val (total thicknes, ie width) - ends= x-x or -x or x- where x is ! or | - |- closed end with full-width line - !- closed end with half-width line - eg Dline(from A to B,E;ends=|-)' -define(`Dline', - `pushkey_(`$2',thick,dlthick) - pushkey_(`$2',ends)pushdef(`m4ends',substr(m4ends,1,eval(len(m4ends)-2))) - dline(`$1',ifinstr(`$2',S,t),ifinstr(`$2',E,t),m4thick,m4ends) - popdef(`m4ends')popdef(`m4ends')popdef(`m4thick') - ') - - `dleft(at position,dlthick) Turn left, - leaving current location at exit of corner' + `dleft(at position,dlthick,attribs) + Turn left, leaving current location + at exit of corner. + attribs= + innershade=(r,g,b)|"color"; + outline=(r,g,b)|"color";' define(`dleft',`deleminit_(,ifelse(`$2',,dlthick,`$2'),`$2') + pushkeys_(`$3',innershade::N;outline::N;) dnl ifelse(`$1',,,`move to substr(`$1',eval(index(`$1',t)+1))-vec_(m4dlthk/2,0)') { line thick m4dlthk/(1bp__) to rvec_(m4dlthk,0) } - ifelse(rgbstring(1,1,1),"",, - `line thick m4dlthk/(1bp__)-2*linethick outlined rgbstring(dfillcolor) \ - to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,m4dlthk/2)') + ifelse(rgbstring(dfillcolor),"",, + `{line thick m4dlthk/(1bp__)-2*linethick \ + m4osh(m4innershade,outlined,`dfillcolor') \ + to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,m4dlthk/2+dfillext)} + move to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,m4dlthk/2) ') ifgpic(`{line from rvec_(0,m4dlthk/2-lthick/2) to rvec_(0,m4dlthk/2-lthick/2)} {line from rvec_(m4dlthk-lthick/2,m4dlthk/2) \ to rvec_(m4dlthk-lthick/2,-m4dlthk/2+lthick/2) then \ to rvec_(0,-m4dlthk/2+lthick/2)} - move to rvec_(m4dlthk/2,m4dlthk/2)') + move to rvec_(m4dlthk/2,m4dlthk/2)') popdef(`m4innershade',`m4outline') rp_ang = rp_ang+pi__/2') - `dright(at position,dlthick) Turn right, - leaving current location at exit of corner' + `dright(at position,dlthick,attribs) + Turn right, leaving current location + at exit of corner. + attribs= + innershade=(r,g,b)|"color"; + outline=(r,g,b)|"color";' define(`dright',`deleminit_(,ifelse(`$2',,dlthick,`$2'),`$2') + pushkeys_(`$3',innershade::N;outline::N;) dnl ifelse(`$1',,,`move to substr(`$1',eval(index(`$1',t)+1))-vec_(m4dlthk/2,0)') { line thick m4dlthk/(1bp__) to rvec_(m4dlthk,0) } - ifelse(rgbstring(1,1,1),"",, - `line thick m4dlthk/(1bp__)-2*linethick outlined rgbstring(dfillcolor) \ - to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,-m4dlthk/2)') + ifelse(rgbstring(dfillcolor),"",, + `{line thick m4dlthk/(1bp__)-2*linethick \ + m4osh(m4innershade,outlined,`dfillcolor') \ + to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,-m4dlthk/2-dfillext)} + move to rvec_(m4dlthk/2,0) then to rvec_(m4dlthk/2,-m4dlthk/2) ') ifgpic(`{line from rvec_(0,-m4dlthk/2+lthick/2) \ to rvec_(0,-m4dlthk/2+lthick/2)} {line from rvec_(m4dlthk-lthick/2,-m4dlthk/2) \ to rvec_(m4dlthk-lthick/2,m4dlthk/2-lthick/2) then \ to rvec_(0,m4dlthk/2-lthick/2)} - move to rvec_(m4dlthk/2,-m4dlthk/2)') + move to rvec_(m4dlthk/2,-m4dlthk/2)') popdef(`m4innershade',`m4outline') rp_ang = rp_ang-pi__/2') - `dturn(arg,dlthick) - Turn arg relative degrees ccw' + + define(`m4osh',`ifelse(`$1',,`ifelse(`$3',,,``$2' rgbstring($3)')', + index(`$1',`"'),0,``$2' `$1'' , + ``$2' rgbstring(m4ctrunc(`$1'))')')dnl + + `dturn(arg,dlthick,attribs) + Turn arg relative degrees ccw + attribs= + innershade=(r,g,b)|"color"; + outline=(r,g,b)|"color";' define(`dturn',`deleminit_(,ifelse(`$2',,dlthick,`$2'),`$2') -[S: Here +[S: Here pushkeys_(`$3',innershade::N;outline::N;) deg = ifelse(`$1',,0,`$1') c = cosd(deg); s = sind(deg); sgn = sign(deg); r = (dlthick-lthick)/2 + G: S+vec_(lthick/2*abs(s),sgn*dlthick/2) A: S+vec_(lthick/2*abs(s),sgn*r) B: A+vec_(vscal_(lthick/2*abs(s),c,s)) + H: G+vec_(vscal_(lthick/2*abs(s),c,s)) C: S+vec_(0, sgn*r) + J: S+vec_(0, sgn*dlthick/2) if deg==0 then {t = 0} else { t = (1-c)/s } # t = tan(deg/2) D: A+vec_(vscal_(r*2,sgn*t,-sgn)) E: B+vec_(vscal_(r*2,sgn*s,-sgn*c)) F: S+vec_(0,-sgn*r) - T: 0.5 between A and D X: 0.5 between B and E - ifelse(rgbstring(1,1,1),"",, - `line thick r*2/(1bp__) outlined rgbstring(dfillcolor) \ - from S to T then to X') + ifelse(rgbstring(dfillcolor),`""',,`line thick 0 \ + m4osh(m4innershade,outlined,`dfillcolor') \ + m4osh(m4innershade,shaded,`dfillcolor') \ + from S to F then to D then to E then to H then to G then to J then to S') ifgpic(`m4tmpth = linethick; linethick=0 shade(dfillgrey,`line from C to A then to B; line from E to D then to F') linethick = m4tmpth') - line from C to A then to B - line from E to D then to F -#{"A" at A;"B" at B;"C" at C;"D" at D;"E" at E; "F" at F;"T" at T;"X" at X} - `$3'] with .S at Here + line thick lthick/(1bp__) m4osh(m4outline,outlined) from C to A then to B + line thick lthick/(1bp__) m4osh(m4outline,outlined) from E to D then to F +# Loopover_(`Px',`"Px" at Px above;', A,B,C,D,E,F,S,X) +# Loopover_(`Px',`"Px" at Px above;', G,H,J) + `$4' popdef(`m4innershade',`m4outline')] with .S at Here move to last [].X ifelse(`$1',,,`Point_(`$1'+rp_ang*rtod_)') ') `darrow(linespec, start truncation, end truncation, dlthick, - arrow wid, arrow ht, terminals) + arrowhd wid, arrowhd ht, terminals,color attribs) terminals is blank or x-, ->, x->, <-, <-x, <-> where x is ! for closed end with half-width line or | for closed end with full-width line' + `e.g., + linethick=5; rgbdraw(1,0,0,darrow(down_ 2,,,0.5,0.75,0.75,|)' + define(`darrow',`deleminit_(`$1',,`$4') + arrow invis from last line.start to last line.end ifelse(ifinstr(`$7',<->,,`$7',<-,T),T, `define(`m4dx',`ifinstr(`$7',|,|,`$7',!,!)'->)dnl M4DA: line invis from last line.end to last line.start \ @@ -170,7 +188,7 @@ define(`darrow',`deleminit_(`$1',,`$4') W: vec_(lthick/2,0) X: ifinstr(`$7',<->,C,m4dx,!,S,m4dx,|,S+(W.x,W.y),S) ifgpic(`shade(dfillgrey,') line dnl - ifelse(rgbstring(1,1,1),"",,`shaded rgbstring(dfillcolor)') from dnl + ifelse(rgbstring(dfillcolor),"",,`shaded rgbstring(dfillcolor)') `$8' from dnl ifinstr(m4dx,|,`X to X+(V.x,V.y) then',`X+(V.x,V.y)') to \ E-(T.x,T.y)+(V.x,V.y) then to E-(T.x,T.y)+(Vt.x,Vt.y) \ then to E-(P.x,P.y) \ @@ -195,109 +213,187 @@ define(`darrow',`deleminit_(`$1',,`$4') `arrow invis from M4DA.start to M4DA.end') ') - `Darrow(linespec,params) - params is a semicolon-separated list of items: - S truncate at start by dline thickness/2 - E truncate at end by dline thickness/2 - thick=val (total thicknes, ie width) - wid=val (arrowhead width) - ht=val (arrowhead height) - ends= -> or x-> or <- or <-x or <-> where x is | or ! - |- closed end with full-width line - !- closed end with half-width line - eg Darrow(from A to B,E;ends=<-|)' -define(`Darrow', - `pushkey_(`$2',thick,dlthick) - pushkey_(`$2',wid,dlthick*3/2) - pushkey_(`$2',ht,dlthick) - pushkey_(`$2',ends)pushdef(`m4ends',substr(m4ends,1,eval(len(m4ends)-2))) - darrow(`$1',ifinstr(`$2',S,t),ifinstr(`$2',E,t),m4thick,m4wid,m4ht,m4ends)dnl - popdef(`m4ends')popdef(`m4ends')popdef(`m4ht',`m4wid',`m4thick')') - - `dtee([L|R],dlthick) Construct tee with tail right, - left, or back along current direction, leaving - current location at tee centre; eg + `dtee([L|R],dlthick|attribs) + Construct tee with tail to back (default), left, + or right of current direction, leaving current + location at tee centre; eg dline(right_,,t); dtee(R); - { darrow(down_,t) }; darrow(right_,t)' -define(`dtee',`deleminit_(,ifelse(`$2',,dlthick,`$2'),`$2') + { darrow(down_,t) }; darrow(right_,t) + attribs: + thick=expr; (line thickness in drawing units) + innershade=(r,g,b)|"color"; + outline=(r,g,b)|"color";' +define(`dtee',`pushkeys_(`$2',thick:m4nil;innershade::N;outline::N;)dnl + deleminit_(,ifelse(m4thick,(m4nil),dlthick,m4thick)) move to last line.c - ifelse(`$1',L,`rp_ang = rp_ang-pi_/2',`$1',R,`rp_ang = rp_ang+pi_/2') - ifelse(rgbstring(1,1,1),"",, - `{line thick dlthick/(1bp__) from rvec_(-m4dlthk/2,0) to rvec_(m4dlthk/2,0)} - {line thick dlthick/(1bp__)-2*linethick outlined rgbstring(dfillcolor) \ - to rvec_(-m4dlthk/2,0) } - {line thick dlthick/(1bp__)-2*linethick outlined rgbstring(dfillcolor) \ - from rvec_(0,-m4dlthk/2) to rvec_(0,m4dlthk/2) } ') + ifelse(`$1',L,`rp_ang = rp_ang-pi_/2', `$1',R,`rp_ang = rp_ang+pi_/2') + ifelse(m4innershade,,,`pushdef(`dfillcolor',`m4ctrunc(m4innershade)')') dnl + {line thick m4dlthk/(1bp__) dnl + ifelse(m4outline,,,index(m4outline,`"'),0,`outlined m4outline', + `outlined rgbstring(m4ctrunc(m4outline))') dnl + from rvec_(-m4dlthk/2,0) to rvec_(m4dlthk/2,0)} + pushdef(`m4dll',(m4dlthk/2+dfillext))dnl + pushdef(`m4df',`rgbstring(dfillcolor)')dnl + ifelse(m4df,"",, + `{line thick m4dlthk/(1bp__)-2*linethick outlined m4df to rvec_(-m4dll,0) } + {line thick m4dlthk/(1bp__)-2*linethick outlined m4df \ + from rvec_(0,-m4dll) to rvec_(0,m4dll) } ') ifgpic(`m4tmpth = linethick; linethick=0; shade(dfillgrey, {line from rvec_(-m4dlthk/2, m4dlthk/2) to rvec_( m4dlthk/2, m4dlthk/2)} {line from rvec_( m4dlthk/2,-m4dlthk/2) to rvec_(-m4dlthk/2,-m4dlthk/2)}) - linethick = m4tmpth') ') + linethick = m4tmpth') + ifelse(m4innershade,,,`popdef(`dfillcolor')')dnl + popdef(`m4thick',`m4innershade',`m4outline',`m4dll',`m4df')') - Close off line end: `dend([at position])' -define(`dend',`deleminit_(,lthick) - ifelse(`$1',,,`move to substr(`$1',eval(index(`$1',at)+2))') - {line from rvec_(0,-dlthick/2) to rvec_(0,dlthick/2)} - move to rvec_(lthick/2,0) ') + `dend([at position],dlthick|attribs) + Close off line end + attribs: + thick=expr; (line thickness in drawing units) + outline=(r,g,b)|"color";' +define(`dend',`pushkeys_(`$2',thick:m4nil;outline::N;)dnl + pushdef(`m4thk',`ifelse(m4thick,(m4nil),dlthick,m4thick)')dnl + ifelse(`$1',,,`move to patsubst(`$1',`^ *at *')') + {line ifelse(m4outline,,,`outlined m4outline') ifinstr(`$2',=,,`$2') dnl + from rvec_(0,-m4thk/2) to rvec_(0,m4thk/2) } + move to rvec_(last line.thick pt__/2,0)dnl + popdef(`m4thick',`m4outline',`m4thk')') `darc(center pos, radius, start radians, end radians, dlthick, - arrow wid, arrow ht, symbols ) draw CCW arc + arrow wid, arrow ht, symbols, + outline attributes, inner attributes ) + draw CCW arc in a [ ] block symbols= x-, -x, x-x, ->, x->, <-, <-x, <-> where x is | or ! ; arrowheads for dpic only ' -define(`darc',`[ C: (0,0) - dlth=ifelse(`$5',,dlthick,`$5') - w = ifelse(`$6',,dlth*1.75,(`$6')) - h = ifelse(`$7',,dlth,(`$7')) - r = ifelse(`$2',,darcrad,`($2)') - p = sqrt((w/2)^2+h^2)/(w/2)*lthick - as = ifelse(`$3',,rp_ang-pi__/2,`$3') - tas = as ifinstr(`$8',<-,`+ p/r') - ae = ifelse(`$4',,as+pi__/2,`$4') - tae = ae ifinstr(`$8',<-,`- p/r') - S: (rect_(r,as)); TS: (rect_(r,tas)) - E: (rect_(r,ae)); TE: (rect_(r,tae)) - arc thick dlth/(1bp__) wid w ht h dnl - ifinstr(`$8',<-,<-`'ifinstr(`$8',->,>),`$8',->,->) from S to E with .c at C - ifelse(rgbstring(1,1,1),"",, - `arc thick dlth/(1bp__)-linethick*2 wid (h-p-lthick)/h*w ht h-p-lthick \ - colored rgbstring(dfillcolor) \ +pushdef(`darc',`pushdef(`m4r',`(ifelse(`$2',,darcrad,`($2)'))') dnl + pushdef(`m4C',`ifelse(`$1',,rvec_(0,m4r),`$1')') dnl + pushdef(`m4as',`(ifelse(`$3',,rp_ang-pi__/2,`$3'))') dnl + pushdef(`m4ae',`(ifelse(`$4',,m4as+pi__/2,`$4'))') dnl + arc invis from m4C+(rect_(m4r,m4as)) to m4C+(rect_(m4r,m4ae)) with .c at m4C + C_darc: last arc.c; Start_darc: last arc.start; End_darc: Here + r_darc = m4r; as_darc = m4as; ae_darc = m4ae popdef(`m4r',`m4C',`m4as',`m4ae') + dlth_darc=ifelse(`$5',,dlthick,(`$5')) + w_darc = ifelse(`$6',,dlth_darc*1.75,(`$6')) + h_darc = ifelse(`$7',,dlth_darc,(`$7')) + p_darc = sqrt((w_darc/2)^2+h_darc^2)/(w_darc/2)*lthick + tas_darc = as_darc ifinstr(`$8',<-,`+ p_darc/r_darc') + tae_darc = ae_darc ifinstr(`$8',->,`- p_darc/r_darc') + TS: C_darc+(rect_(r_darc,tas_darc)) + TE: C_darc+(rect_(r_darc,tae_darc)) + { arc thick dlth_darc/(1bp__) wid w_darc ht h_darc dnl + ifinstr(`$8',<-,<-`'ifinstr(`$8',->,>),`$8',->,->) dnl + `$9' from Start_darc to End_darc with .c at C_darc } + pushdef(`m4inn',`ifelse(`$10',,`ifelse(rgbstring(dfillcolor),"",, + ifdef(`dfillcolor',T),T,`outlined rgbstring(dfillcolor)')',`$10')') dnl + ifelse(m4inn,,, + `arc thick dlth_darc/(1bp__)-linethick*2 \ + wid (h_darc-p_darc-lthick)/h_darc*w_darc ht h_darc-p_darc-lthick \ ifinstr(`$8',<-,<-`'ifinstr(`$8',->,>),`$8',->,->) \ - from TS to TE rad r with .c at C') - ifinstr(`$8',|-,`X: (vscal_(lthick/2,-sin(as),cos(as))) - line from C+(rect_(r+dlthick/2-lthick/2,as))+(X.x,X.y) to \ - C+(rect_(r-dlthick/2+lthick/2,as))+(X.x,X.y)', - `$8',!-,`X: (vscal_(lthick/4,-sin(as),cos(as))) - line thick linethick/2 \ - from C+(rect_(r+dlthick/2-lthick/4,as))+(X.x,X.y) to \ - C+(rect_(r-dlthick/2+lthick/4,as))+(X.x,X.y)') - ifinstr(`$8',-|,`X: (vscal_(lthick/2,-sin(ae),cos(ae))) - line from C+(rect_(r+dlthick/2-lthick/2,ae))-(X.x,X.y) to \ - C+(rect_(r-dlthick/2+lthick/2,ae))-(X.x,X.y)', - `$8',!-,`X: (vscal_(lthick/4,-sin(ae),cos(ae))) - line thick linethick/2 \ - from C+(rect_(r+dlthick/2-lthick/4,ae))-(X.x,X.y) to \ - C+(rect_(r-dlthick/2+lthick/4,ae))-(X.x,X.y)') - rp_ang := ae+pi__/2 - ] with ifelse(`$1',,.S at Here,.C at `$1') - move to last [].E - ') + m4inn from TS to TE with .c at C_darc') popdef(`m4inn') + ifinstr(`$8',|-,`X: (vscal_(lthick/2,-sin(as_darc),cos(as_darc))) + line `$9' \ + from C_darc+(rect_(r_darc+dlth_darc/2-lthick/2,as_darc))+X to \ + C_darc+(rect_(r_darc-dlth_darc/2+lthick/2,as_darc))+X', + `$8',!-,`X: (vscal_(lthick/4,-sin(as_darc),cos(as_darc))) + line `$9' thick linethick/2 \ + from C_darc+(rect_(r_darc+dlth_darc/2-lthick/4,as_darc))+X to \ + C_darc+(rect_(r_darc-dlth_darc/2+lthick/4,as_darc))+X') + ifinstr(`$8',-|,`X: (vscal_(lthick/2,-sin(ae_darc),cos(ae_darc))) + line `$9' from C_darc+(rect_(r_darc+dlth_darc/2-lthick/2,ae_darc))-X to \ + C_darc+(rect_(r_darc-dlth_darc/2+lthick/2,ae_darc))-X', + `$8',-!,`X: (vscal_(lthick/4,-sin(ae_darc),cos(ae_darc))) + line `$9' thick linethick/2 \ + from C_darc+(rect_(r_darc+dlth_darc/2-lthick/4,ae_darc))-X to \ + C_darc+(rect_(r_darc-dlth_darc/2+lthick/4,ae_darc))-X') + rp_ang := ae_darc+pi__/2 ') `Darc(center pos, radius, start radians, end radians, params) + or + Darc(,params) draw CCW arc - params is a semicolon-separated list of items: - thick=val (total thicknes, ie width) - wid=val (arrowhead width) - ht=val (arrowhead height) + params is a semicolon-separated list: + thick=val; (total thicknes, ie width) + wid=val; (arrowhead width) + ht=val; (arrowhead height) + outline=color; (e.g. "red" or (1,0,0) ) + innershade=color; (e.g. (0,1,1) or "cyan") ends= x-, -x, x-x, ->, x->, <-, <-x, <-> where x is ! or | < and > work for dpic only |- closed end with full-width line !- closed end with half-width line + If arg1 is null then the additional list items are accepted: + centre=Position; + rad=expr; + startdeg=degrees; NOTE: degrees + enddeg=degrees; NOTE: degrees eg Darc(C,r,ang1,ang2,ends=<-|)' define(`Darc', - `pushkey_(`$5',thick,dlthick) - pushkey_(`$5',wid,dlthick*1.75) - pushkey_(`$5',ht,dlthick) - pushkey_(`$5',ends)pushdef(`m4ends',substr(m4ends,1,eval(len(m4ends)-2))) - darc(`$1',`$2',`$3',`$4',m4thick,m4wid,m4ht,m4ends)dnl - popdef(`m4ends')popdef(`m4ends')popdef(`m4ht',`m4wid',`m4thick')') + `pushkeys_(ifelse(`$1',,`$2',`$5'),thick:dlthick;wid:dlthick*1.75;ht:dlthick; + outline::N;innershade::N;ends::N;centre:Here:N;rad:darcrad; + startdeg::;enddeg::;)dnl + pushdef(`m4ou',`m4osh(m4outline,outlined)')dnl + pushdef(`m4sh',`m4osh(m4innershade,outlined,`dfillcolor')')dnl + ifelse(`$1',, + `darc(m4centre,m4rad,m4startdeg*dtor_,m4enddeg*dtor_, + m4thick,m4wid,m4ht,m4ends,m4ou,m4sh)', + `darc(`$1',`$2',ifelse(m4startdeg,,`$3',m4startdeg*dtor_), + ifelse(m4enddeg,,`$4',m4enddeg*dtor_), + m4thick,m4wid,m4ht,m4ends,m4ou,m4sh)') dnl + popdef(`m4thick',`m4wid',`m4ht',`m4outline',`m4innershade',`m4ends', + `m4centre',`m4rad',`m4startdeg',`m4enddeg',`m4ou',`m4sh')')') + + `darrow(linespec,params) + params is a semicolon-separated list of items: + s; truncate at start by dline thickness/2 + e; truncate at end by dline thickness/2 + thick=expr; (total thicknes, ie width) + wid=expr; (arrowhead width) + ht=expr; (arrowhead height) + outline=color; (e.g. "red" or (1,0,0) ) + innershade=color; (e.g. (0,1,1) or "cyan") + name=name; (name of underlying invis line) + ends= -> or x-> or <- or <-x or <-> where x is | or ! + |- closed end with full-width line + !- closed end with half-width line + eg Darrow(from A to B,E;ends=<-|)' +define(`Darrow', + `pushkeys_(`$2',thick:dlthick;wid:dlthick*3/2;ht:dlthick; + outline::N;innershade::N;name::N;ends::N;)dnl + ifelse(m4innershade,,,`pushdef(`dfillcolor',`m4ctrunc(m4innershade)')')dnl + pushdef(`m4nm',ifelse(m4name,,,m4name:))dnl + ifelse(m4outline,, + `m4nm darrow(`$1',ifinstr(`$2',S,t),ifinstr(`$2',E,t), + m4thick,m4wid,m4ht,m4ends)', + index(m4outline,`"'),0, + `m4nm darrow(`$1',ifinstr(`$2',S,t),ifinstr(`$2',E,t), + m4thick,m4wid,m4ht,m4ends,outlined m4outline)', + `rgbdraw(m4ctrunc(m4outline), + m4nm darrow(`$1',ifinstr(`$2',S,t),ifinstr(`$2',E,t), + m4thick,m4wid,m4ht,m4ends))') + ifelse(m4innershade,,,`popdef(`dfillcolor')')dnl + popdef(`m4ends',`m4thick',`m4wid',`m4ht',`m4outline',`m4innershade',`m4name', + `m4nm')') + + `Dline(linespec,params) + params is a semicolon-separated list of items: + S; truncate at start by dline thickness/2 + E; truncate at end by dline thickness/2 + thick=val; (total thicknes, ie width) + outline=color; (e.g. "red" or (1,0,0) ) + innershade=color; (e.g. (0,1,1) or "cyan") + name=Name; + ends= x-x; or -x; or x-; where x is ! or | + |- closed end with full-width line + !- closed end with half-width line + eg Dline(from A to B,E;ends=|-)' +define(`Dline', + `pushkeys_(`$2',thick:dlthick;outline::N;innershade::N;ends::N;name::N;)dnl + ifelse(m4name,,,m4name:) dline(`$1',ifinstr(`$2',S;,t),ifinstr(`$2',E;,t), + m4thick,m4ends,m4osh(m4outline,outlined), + m4osh(m4innershade,outlined,`dfillcolor')) + popdef(`m4thick',`m4outline',`m4innershade',`m4ends',`m4name') ') + +define(`m4ctrunc',`substr(`$1',1,eval(len(`$1')-2))') +#efine(`mark',`{dot(at `$1'); "`$1'" at last [].s below}') +#efine(`pure',`patsubst(`$1',`"',`\\"')') divert(0)dnl diff --git a/Master/texmf-dist/doc/latex/circuit-macros/doc/Circuit_macros.pdf b/Master/texmf-dist/doc/latex/circuit-macros/doc/Circuit_macros.pdf Binary files differindex e9b0b671bf0..dcc3027e97e 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/doc/Circuit_macros.pdf +++ b/Master/texmf-dist/doc/latex/circuit-macros/doc/Circuit_macros.pdf diff --git a/Master/texmf-dist/doc/latex/circuit-macros/doc/SourcesMan.m4 b/Master/texmf-dist/doc/latex/circuit-macros/doc/SourcesMan.m4 index 8e82b3f8324..9f39d1e0445 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/doc/SourcesMan.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/doc/SourcesMan.m4 @@ -14,6 +14,7 @@ define(`NL',`; move down $1; right_') {source ; move ; "`source'" ljust} NL {source(,I) ; move ; "`source(,I)'" ljust} NL {source(,i) ; move ; "`source(,i)'" ljust} NL + {source(,ii) ; move ; "`source(,ii)'" ljust} NL {source(,V) ; move ; "`source(,V)'" ljust} NL {source(,v) ; move ; "`source(,v)'" ljust} NL {source(,S) ; move ; "`source(,S)'" ljust} NL diff --git a/Master/texmf-dist/doc/latex/circuit-macros/doc/Version.tex b/Master/texmf-dist/doc/latex/circuit-macros/doc/Version.tex index 73fb7dd5770..1f7ee14733e 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/doc/Version.tex +++ b/Master/texmf-dist/doc/latex/circuit-macros/doc/Version.tex @@ -1 +1 @@ -Version 10.3 +Version 10.4 diff --git a/Master/texmf-dist/doc/latex/circuit-macros/doc/body.tex b/Master/texmf-dist/doc/latex/circuit-macros/doc/body.tex index e229888d914..296ba4e2953 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/doc/body.tex +++ b/Master/texmf-dist/doc/latex/circuit-macros/doc/body.tex @@ -946,6 +946,7 @@ and for power-system diagrams, macros and {\tt Ysymbol(at {\sl position, keys,} U|D|L|R|{\sl degrees})}, +\enlargethispage{\baselineskip} Diodes are shown in \FR{Diodes}. \begin{figure}[H] \input DiodesMan @@ -2481,7 +2482,7 @@ For the slash symbol, the {\tt sl\_slash} keys are valid. The fourth argument is like the third but controls a breaker or slash symbol in the output -lead. The example, {\tt sl\_transformer(right\_ elen\_ from A,,C,C)} +lead. The example, {\tt sl\_transformer(right\_ elen\_ from A,{},C,C)} draws a transformer with closed breakers in the input and output leads. Exception are the {\tt sl\_drawout()} element which does not have breakers diff --git a/Master/texmf-dist/doc/latex/circuit-macros/doc/defines.tex b/Master/texmf-dist/doc/latex/circuit-macros/doc/defines.tex index cf87a5b02f1..7f3ceea1b31 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/doc/defines.tex +++ b/Master/texmf-dist/doc/latex/circuit-macros/doc/defines.tex @@ -187,14 +187,14 @@ {cct} {line (dotted, dashed permissible) with centred arrowhead \seesect{Twoterminal:}} +\macrodef{assign3}{assign3}{({\sl var name,var name,var name,arg4,arg5,arg6})} + {gen} + {Assigns \$1 = arg4 if \$1 is nonblank; similarly \$2 = arg5 and \$3 = arg6} \macrodef{AutoGate}{AutoGate}{} {log} {Draw the tree for a gate as in the {\tt Autologix} macro. No inputs or external connections are drawn. The names of the internal gate inputs are stacked in {\tt `AutoInNames'}} -\macrodef{assign3}{assign3}{({\sl var name,var name,var name,arg4,arg5,arg6})} - {gen} - {Assigns \$1 = arg4 if \$1 is nonblank; similarly \$2 = arg5 and \$3 = arg6} \macrodef{Autologix}{Autologix}% {({\sl Boolean function sequence},% [N[oconnect]][L[eftinputs]][R][V][M][;offset={\sl value}])} @@ -239,14 +239,6 @@ {\tt Autologix(Xor([PN],And(x,y),And(x,y)),LRV)}} \Letter{B}% -\macrodef{b\_}{b_}{} - {gen} - {blue color value} -\macrodef{b\_current}{b_current}{({\sl label},{\sl pos},In|Out,Start|End,{\sl - frac})} - {cct} - {labelled branch-current arrow to {\sl frac} between branch end and body - \seesect{Branchcurrent:}} \macrodef{basename\_}{basename_}{({\sl string sequence, separator})} {gen} {Extract the rightmost name from a sequence of names separated by arg2 @@ -255,6 +247,14 @@ {cct} {n-cell battery: default 1 cell, R=reversed polarity\seesect{Twoterminal:}} +\macrodef{b\_}{b_}{} + {gen} + {blue color value} +\macrodef{b\_current}{b_current}{({\sl label},{\sl pos},In|Out,Start|End,{\sl + frac})} + {cct} + {labelled branch-current arrow to {\sl frac} between branch end and body + \seesect{Branchcurrent:}} \macrodef{beginshade}{beginshade}{({\sl gray value})} {gen} {begin gray shading, see {\tt shade} @@ -270,10 +270,10 @@ {gen} {Position {\sl distance} from {\sl Pos1} toward {\sl Pos2}. If the fourth arg is {\tt R} then from {\sl Pos2} toward {\sl Pos1}.} -\macrodef{bi\_tr}{bi_tr}{(\linespec,L|R,P,E)} - {cct} - {left or right, N- or P-type bipolar transistor, without or with envelope - \seesect{Semiconductors:}} +\macrodef{binary\_}{binary_}{($n$, [$m$])} + {gen} + {binary representation of $n,$ left padded to $m$ digits if the second + argument is nonblank} \macrodef{bi\_trans}{bi_trans}{(\linespec,L|R,{\sl chars},E)} {cct} { bipolar transistor, core left or right; chars: @@ -291,15 +291,10 @@ {\tt [u]T}=thyristor trigger line; arg 4 = E: envelope \seesect{Semiconductors:}} -\macrodef{binary\_}{binary_}{($n$, [$m$])} - {gen} - {binary representation of $n,$ left padded to $m$ digits if the second - argument is nonblank} -\macrodef{BOX\_gate}{BOX_gate}{({\sl inputs,output,swid,sht,label})} - {log} - {output=[{\tt P|N}], inputs=[{\tt P|N}]$\ldots$, sizes swid and sht - in {\tt L\_unit}s (default {\tt AND\_wd} = 7) - \seesect{Logicgates:}} +\macrodef{bi\_tr}{bi_tr}{(\linespec,L|R,P,E)} + {cct} + {left or right, N- or P-type bipolar transistor, without or with envelope + \seesect{Semiconductors:}} \macrodef{boxcoord}{boxcoord}{({\sl planar obj},{\sl x fraction},{\sl y fraction})} {gen} @@ -309,6 +304,11 @@ {evaluate, e.g.\ {\sl name}{\tt \_w} if defined, else {\sl default\/} if given, else 0 {\tt v} gives sum of {\tt d} and {\tt h} values \seesect{Interaction:}} +\macrodef{BOX\_gate}{BOX_gate}{({\sl inputs,output,swid,sht,label})} + {log} + {output=[{\tt P|N}], inputs=[{\tt P|N}]$\ldots$, sizes swid and sht + in {\tt L\_unit}s (default {\tt AND\_wd} = 7) + \seesect{Logicgates:}} \macrodef{bp\_\_}{bp__}{} {gen} {big-point-size factor, in scaled inches, ({\tt *scale/72})} @@ -316,12 +316,6 @@ {cct} {pushbutton switch R=right orientation (default L=left); chars: O= normally open, C=normally closed } -\macrodef{BUF\_ht}{BUF_ht}{} - {log} - {basic buffer gate height in {\tt L\_unit}s} -\macrodef{BUF\_wd}{BUF_wd}{} - {log} - {basic buffer gate width in {\tt L\_unit}s} \macrodef{BUFFER\_gate}{BUFFER_gate}{(\linespec, [N|B], {\sl wid, ht,} [N|P]\char42, [N|P]\char42, [N|P]\char42)} {log} @@ -339,14 +333,17 @@ Args 4-6 allow alternative definitions of respective {\tt In, NE,} and {\tt SE} argument sequences } +\macrodef{BUF\_ht}{BUF_ht}{} + {log} + {basic buffer gate height in {\tt L\_unit}s} +\macrodef{BUF\_wd}{BUF_wd}{} + {log} + {basic buffer gate width in {\tt L\_unit}s} \macrodef{buzzer}{buzzer}{( U|D|L|R|{\sl degrees, size,}[C])} {cct} {buzzer, {\sl In1} to {\sl In3} defined, C=curved \seesect{Composite:}} \Letter{C}% -\macrodef{c\_fet}{c_fet}{(\linespec,R,P)} - {cct} - {left or right, plain or negated pin simplified MOSFET} \macrodef{capacitor}{capacitor}{(\linespec,{\sl chars},R, {\sl height}, {\sl wid})} {cct} @@ -385,6 +382,9 @@ minimum long dash len, short dash len, gap len}} {gen} {Technical drawing centerline} +\macrodef{c\_fet}{c_fet}{(\linespec,R,P)} + {cct} + {left or right, plain or negated pin simplified MOSFET} \macrodef{Cintersect}{Cintersect}{({\sl Pos1, Pos2, rad1, rad2,} [R])} {gen} {Upper (lower if arg5={\tt R}) intersection of circles at @@ -457,14 +457,14 @@ {\sl phase} )} {gen} {function $a\times\cos(\omega t + \phi)$ } +\macrodef{cross3D}{cross3D}{({\sl x1,y1,z1,x2,y2,z2})} + {3D} + {cross product of two triples} \macrodef{cross}{cross}{(at {\sl location, size}|{\sl keys})} {gen} {Plots a small cross. The possible key-value pairs are: {\tt size={\sl expr};}, {\tt line={\sl attributes};} } -\macrodef{cross3D}{cross3D}{({\sl x1,y1,z1,x2,y2,z2})} - {3D} - {cross product of two triples} \macrodef{crossover}{crossover}{(\linespec, [L|R][:{\sl line attributes}], Line1, Line2, .{.}.)} {cct} @@ -476,10 +476,6 @@ {cct} {controlled-source width} \Letter{D}% -\macrodef{d\_fet}{d_fet}{(\linespec,R,P,E|S)} - {cct} - {left or right, N or P depletion MOSFET, envelope or simplified - \seesect{Semiconductors:}} \macrodef{dabove}{dabove}{(at {\sl location})} {darrow} {above (displaced dlinewid/2)} @@ -488,18 +484,6 @@ {DAC with defined width, height, and number of inputs {\tt In$i$}, top terminals {\tt N$i$}, ouputs {\tt Out$i$}, and bottom terminals~{\tt S$i$} \seesect{Logicgates:}} -\macrodef{darc}{darc}{({\sl center position}, - {\sl radius}, {\sl start radians}, {\sl end radians}, {\sl dline thickness}, - {\sl arrowhead wid}, {\sl arrowhead ht}, - {\sl terminals})} - {darrow} - {See also {\tt Darc}. - CCW arc in {\tt dline} style, with closed ends or (dpic only) arrowheads. - Permissible {\sl terminals}: - {\sl x}{\tt -}, - {\tt -}{\sl x}, {\sl x}{\tt -}{\sl x}, {\tt ->}, {\sl x}{\tt ->}, - {\tt <-}, {\tt <-}{\sl x}, {\tt <->} - where {\sl x} means {\tt |} or (half-thickness line) {\tt !}.} \macrodef{Darc}{Darc}{({\sl center position}, {\sl radius}, {\sl start radians}, {\sl end radians}, {\sl parameters})} @@ -512,6 +496,20 @@ {\tt -}{\sl x}, {\sl x}{\tt -}{\sl x}, {\tt ->}, {\sl x}{\tt ->}, {\tt <-}, {\tt <-}{\sl x}, {\tt <->} where {\sl x} means {\tt |} or (half-thickness line) {\tt !}.} +\macrodef{darc}{darc}{({\sl center position}, + {\sl radius}, {\sl start radians}, {\sl end radians}, {\sl dline thickness}, + {\sl arrowhead wid}, {\sl arrowhead ht}, + {\sl end symbols}, {\sl outline attributes}, {\sl inner attributes})} + {darrow} + {See also {\tt Darc}. + CCW arc in {\tt dline} style, with closed ends or (dpic only) arrowheads. + Permissible {\sl end symbols}: + {\sl x}{\tt -}, + {\tt -}{\sl x}, {\sl x}{\tt -}{\sl x}, {\tt ->}, {\sl x}{\tt ->}, + {\tt <-}, {\tt <-}{\sl x}, {\tt <->} + where {\sl x} means {\tt |} or (half-thickness line) {\tt !}. + An inner arc is drawn overlaying the outer arc. + Example: {\tt darc(,{,},{,},{,},{,}outlined "red",outlined "yellow")}.} \macrodef{Darlington}{Darlington}{(L|R,{\sl chars})} {cct} {Composite Darlington pair Q1 and Q2 with internal locations E, B, C; @@ -524,33 +522,44 @@ R2= Q2 bias resistor; E1= ebox, Z= zener bias diode \seesect{Semiconductors:}} -\macrodef{darrow\_init}{darrow_init}{} +\macrodef{darrow}{darrow}{(\linespec, + t,t,{\sl width},{\sl arrowhd wd},{\sl arrowhd ht},{\sl parameters}, + {\sl color attributes})} {darrow} - {initialize darrow drawing parameters (reads {\tt darrow.m4})} + {See also {\tt Darrow}. + Double arrow, truncated at beginning (arg2={\tt t}) or + end (arg3={\tt t}), specified sizes, + with arrowhead and optional closed stem. The parameters (arg7) are + {\tt {\sl x}-} or {\tt ->} or {\tt {\sl x}->} or {\tt <-} or {\tt <-{\sl x}} + or {\tt <->} where {\sl x} is {\tt |} or {\tt !}. + The {\tt !-} or {\tt -!} parameters close + the stem with half-thickness lines to simplify butting to other objects. + The color attributes are, e.g., + {\tt outlined "{\sl color}" shaded "{\sl color}"}. + Example: + {\tt linethick=5; darrow(down\_\ 2,{,},0.5,0.75,0.75,|,outlined "red")}. } \macrodef{Darrow}{Darrow}{(\linespec, {\sl parameters})} {darrow} {Wrapper for {\tt darrow}. Semicolon-separated {\sl parameters}: - {\tt S}, {\tt E} truncate at start or end by dline thickness/2; - {\tt thick=}{\sl val} (total thicknes, ie width); - {\tt wid=}{\sl val} (arrowhead width); - {\tt ht=}{\sl val} (arrowhead height); + {\tt S;}, {\tt E;} truncate at start or end by dline thickness/2; + {\tt thick=}{\sl val}; (total thicknes, ie width); + {\tt wid=}{\sl val}; (arrowhead width); + {\tt ht=}{\sl val}; (arrowhead height); {\tt ends=} {\sl x}{\tt -}{\sl x} or {\tt -}{\sl x} or {\sl x}{\tt -} where {\sl x} is {\tt !} (half-width line) - or {\tt |} (full-width line).} -\macrodef{darrow}{darrow}{(\linespec, - t,t,{\sl width},{\sl arrowhd wd},{\sl arrowhd ht},{\sl parameters})} + or {\tt |} (full-width line). + Examples: + {\tt define(`dfillcolor',`1,0.85,0') linethick=5; + rgbdraw(1,0,0,Darrow(down\_\ 2,thick=0.5; wid=0.75; ht=0.75; ends=|->))}, + which is equivalent to + {\tt Darrow(down\_\ 2,thick=0.5; wid=0.75; ht=0.75; \ + ends=|->; outline="red")}. } +\macrodef{darrow\_init}{darrow_init}{} {darrow} - {See also {\tt Darrow}. - double arrow, truncated at beginning or end, specified sizes, - with arrowhead or closed stem. - {\sl parameters=} - {\tt {\sl x}-} or {\tt ->} or {\tt {\sl x}->} or {\tt <-} or {\tt <-{\sl x}} - or {\tt <->} where {\sl x} is {\tt |} or {\tt !}. - The {\tt !-} or {\tt -!} parameters close - the stem with half-thickness lines to simplify butting to other objects. } + {Initialize darrow drawing parameters (reads library file {\tt darrow.m4})} \macrodef{dashline}{dashline}{(\linespec,{\sl thickness}|{\sl color}|<->, {\sl dash len, gap len},G)} {gen} @@ -567,14 +576,14 @@ {A DC symbol (a dashed line below a solid line). The current drawing direction is default, otherwise Up, Down, Left, Right, or at {\sl degrees} slant; e.g., - {\tt source(up\_ dimen\_); $\lbrace$ DCsymbol(at last [],,,R) $\rbrace$} + {\tt source(up\_ dimen\_); $\lbrace$ DCsymbol(at last [],{},{},R) $\rbrace$} \seesect{Twoterminal:} } -\macrodef{delay\_rad\_}{delay_rad_}{} - {cct} - {delay radius} \macrodef{delay}{delay}{(\linespec,{\sl size})} {cct} {delay element\seesect{Twoterminal:}} +\macrodef{delay\_rad\_}{delay_rad_}{} + {cct} + {delay radius} \macrodef{deleminit\_}{deleminit_}{} {darrow} {sets drawing direction for dlines} @@ -599,18 +608,26 @@ {\tt S[{\sl n}]} puts the Sel inputs at the bottom (default) {\tt OE} ({\tt N=}negated) {\tt OE} pin \seesect{Logicgates:}} -\macrodef{dend}{dend}{(at {\sl location})} +\macrodef{dend}{dend}{(at {\sl location}, + {\sl line thickness}{\tt |}{\sl attributes})} {darrow} - {close (or start) double line} + {Close (or start) double line (Note specifying {\tt dends=} for {\tt Dline} + is a similar function. Arg2 is dline thickness or atributes: + {\tt thick={\sl expression};} (dline thickness in drawing units) + {\tt outline=({\sl r,g,b})|"{\sl color}";}} +\macrodef{d\_fet}{d_fet}{(\linespec,R,P,E|S)} + {cct} + {left or right, N or P depletion MOSFET, envelope or simplified + \seesect{Semiconductors:}} \macrodef{dfillcolor}{dfillcolor}{} {darrow} {dline fill color (default white)} -\macrodef{diff\_}{diff_}{({\sl a},{\sl b})} - {gen} - {difference function} \macrodef{diff3D}{diff3D}{({\sl x1,y1,z1,x2,y2,z2})} {3D} {difference of two triples} +\macrodef{diff\_}{diff_}{({\sl a},{\sl b})} + {gen} + {difference function} \macrodef{dimen\_}{dimen_}{} {cct} {size parameter for scaling circuit element bodies \seesect{Circuitscaling:}} @@ -671,20 +688,27 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% line rather than the centre of the last {\tt [ ]}; L,R,A,B align labels ljust, rjust, above, or below (absolute) respectively \seesect{Labels:}} -\macrodef{dleft}{dleft}{} +\macrodef{dleft}{dleft}{({\tt at} {\sl position}, {\sl line thickness}, + {\sl attributes})} {darrow} - {double line left turn} + {Double line left turn 90 degrees. Attributes can be + {\tt outline=({\sl r, g, b})|"{\sl color}";} + {\tt innershade=({\sl r, g, b})|"{\sl color}";} + where rgb values in parentheses or a defined color is specified.} \macrodef{Dline}{Dline}{(\linespec, {\sl parameters})} {darrow} {Wrapper for {\tt dline}. - Semicolon-separated {\sl parameters}: - {\tt S}, {\tt E} truncate at start or end by dline thickness/2; - {\tt thick=}{\sl val} (total thicknes, ie width); + The semicolon-separated {\sl parameters} are: + {\tt S;}, {\tt E;} truncate at start or end by dline thickness/2; + {\tt thick={\sl val};} (total thicknes, ie width); + {\tt outline={\sl color};} (e.g., {\tt "red"} or {\tt (1,0,0)}), + {\tt innershade={\sl color};} (e.g., {\tt (0,1,1)} or {\tt "cyan"}), + {\tt name={\sl Name};}, {\tt ends=} {\sl x}{\tt -}{\sl x} or {\tt -}{\sl x} or {\sl x}{\tt -} where {\sl x} is {\tt !} (half-width line) - or {\tt |} (full-width line).} + or {\tt |;} (full-width line).} \macrodef{dline}{dline}{(\linespec,t,t,{\sl width},{\sl parameters})} {darrow} {See also {\tt Dline}. @@ -701,33 +725,37 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% \macrodef{dljust}{dljust}{(at {\sl location})} {darrow} {ljust (displaced dlinewid/2)} -\macrodef{dn\_}{dnx}{} - {gen} - {down with respect to current direction} \macrodef{dna\_}{dna_}{} {cct} {internal character sequence that specifies which subcomponents are drawn} +\macrodef{dn\_}{dnx}{} + {gen} + {down with respect to current direction} %\macrodef{dnm\_}{dnm_}{} % {cct} % {similar to dna\_} +\macrodef{dot3D}{dot3D}{({\sl x1,y1,z1,x2,y2,z2})} + {3D} + {dot product of two triples} \macrodef{dot}{dot}{(at {\sl location},{\sl radius}|{\sl keys},{\sl fill})} {gen} {Filled circle (third arg= gray value: 0=black, 1=white). The possible key-value pairs are: {\tt rad={\sl expr};} and {\tt circle={\sl attributes};} } -\macrodef{dot3D}{dot3D}{({\sl x1,y1,z1,x2,y2,z2})} - {3D} - {dot product of two triples} \macrodef{dotrad\_}{dotrad_}{} {gen} {dot radius} \macrodef{down\_}{down_}{} {gen} {sets current direction to down \seesect{Placing:}} -\macrodef{dright}{dright}{} +\macrodef{dright}{dright}{({\tt at} {\sl position}, {\sl line thickness}, + {\sl attributes})} {darrow} - {double arrow right turn} + {Double line right turn 90 degrees. Attributes can be + {\tt outline=({\sl r, g, b})|"{\sl color}";} + {\tt innershade=({\sl r, g, b})|"{\sl color}";} + where rgb values in parentheses or a defined color is specified.} \macrodef{drjust}{drjust}{(at {\sl location})} {darrow} {rjust (displaced dlinewid/2)} @@ -763,28 +791,30 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% Y = pull switch, Z = turn switch \seesect{Twoterminal:}} -\macrodef{dtee}{dtee}{([L|R])} +\macrodef{dtee}{dtee}{([L|R], {\sl line thickness}, {\sl attributes})} {darrow} - {double arrow tee junction with tail to left, - right, or (default) back along current direction } + {Double arrow tee junction with tail to left, + right, or (default) back along current direction, leaving the current + location at the tee centre; e.g., + {\tt dline(right\_,{,}t); dtee(R); + \{ darrow(down\_,t) \}; darrow(right\_,t)}. + The attributes are + {\tt thick={\sl expr};} (line thickness in drawing units), + {\tt innershade=({\sl r,g,b})|"{\sl color}";} + {\tt outline=({\sl r,g,b})|"{\sl color}";}. } \macrodef{dtor\_}{dtor_}{} {gen} {degrees to radians conversion constant} -\macrodef{dturn}{dturn}{({\sl degrees ccw})} +\macrodef{dturn}{dturn}{({\sl degrees ccw},{\sl line thickness}, + {\sl attributes})} {darrow} - {turn dline arg1 degrees left (ccw)} + {Tturn dline arg1 degrees left (ccw). + Attributes can be + {\tt outline=({\sl r, g, b})|"{\sl color}";} + {\tt innershade=({\sl r, g, b})|"{\sl color}";} + where rgb values in parentheses or a defined color is specified.} +% \Letter{E}% -\macrodef{E\_\_}{E__}{} - {gen} - {the constant $e$} -\macrodef{e\_}{e_}{} - {gen} - {.e relative to current direction} -\macrodef{e\_fet}{e_fet}{(\linespec,R,P,E|S)} - {cct} - {left or right, N or P enhancement MOSFET, normal - or simplified, without or with envelope - \seesect{Semiconductors:}} \macrodef{earphone}{earphone}{( U|D|L|R|{\sl degrees, size})} {cct} {earphone, {\sl In1} to {\sl In3} defined @@ -800,6 +830,17 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% terms. The possible keys are {\tt lgth, wdth, text, box}, e.g., {\tt lgth=0.2; text=\char34{}XX\char34; box=shaded \char34{}green\char34}\seesect{Twoterminal:}} +\macrodef{E\_\_}{E__}{} + {gen} + {the constant $e$} +\macrodef{e\_}{e_}{} + {gen} + {.e relative to current direction} +\macrodef{e\_fet}{e_fet}{(\linespec,R,P,E|S)} + {cct} + {left or right, N or P enhancement MOSFET, normal + or simplified, without or with envelope + \seesect{Semiconductors:}} \macrodef{elchop}{elchop}{({\sl Name1,Name2})} {gen} {{\tt chop} for ellipses: evaluates to {\tt chop} $r$ where $r$ is @@ -812,6 +853,13 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% \macrodef{elen\_}{elen_}{} {cct} {default element length} +\macrodef{ellipsearc}{ellipsearc}{({\sl width, height, startangle, endangle, + rotangle, {\tt cw|ccw}, line attributes})} + {gen} + {Arc of a rotated ellipse in a {\tt [ ]} block. Angles are in radians. + Arg5 is the angle of the width axis; + e.g., {\tt ellipsearc(2,1,0,pi\_,pi\_/4,{},dashed ->)}. Internal locations + are {\tt Start, End, C} (for centre). } \macrodef{em\_arrows}{em_arrows}{({\sl type}|{\sl keys,angle,length})} {cct} { Radiation arrows: {\sl type} {\tt N|I|E [D|T]} @@ -832,6 +880,7 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% \macrodef{expe}{expe}{} {gen} {exponential, base $e$} +% \Letter{F}% \macrodef{f\_box}{f_box}{({\sl boxspecs},{\sl text},{\sl expr1},$\cdots$)} {gen} @@ -860,11 +909,6 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% \macrodef{fitcurve}{fitcurve}{(V,n,[e.g. dotted],m (default 0))} {gen} {Draw a spline through positions V[m], $ldots$ V[n]: Works only with dpic.} -\macrodef{FlipFlop}{FlipFlop}{(D|T|RS|JK,{\sl label},{\sl boxspec},% - {\sl pinlength})} - {log} - {flip-flops, - {\sl boxspec}=e.g.\ ht x wid y \seesect{Logicgates:}} \macrodef{FlipFlop6}{FlipFlop6}{({\sl label},{\sl spec},{\sl boxspec})} {log} {{\em This macro (6-input flip-flops) @@ -873,6 +917,11 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% {\sl spec}={\tt [[n]NQ][[n]Q][[n]CK][[n]PR][lb]} {\tt [[n]CLR][[n]S][[n].|D|T|R]} to include and negate pins, {\tt lb} to print labels } +\macrodef{FlipFlop}{FlipFlop}{(D|T|RS|JK,{\sl label},{\sl boxspec},% + {\sl pinlength})} + {log} + {flip-flops, + {\sl boxspec}=e.g.\ ht x wid y \seesect{Logicgates:}} \macrodef{FlipFlopJK}{FlipFlopJK}{({\sl label}, {\sl spec},{\sl boxspec})} {log} {{\em This macro (JK flip-flop) @@ -903,9 +952,6 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% {\tt L}=active low out; {\tt M}=active low in; {\tt E}=edge trigger \seesect{Logicgates:}. Optional arg 7 is the length of pins} -\macrodef{for\_}{for_}{({\sl start},{\sl end},{\sl increment},`{\sl actions}')} - {gen} - {integer for loop with index variable {\tt m4x} \seesect{Looping:}} \macrodef{foreach\_}{foreach_}{(`{\sl variable}',{\sl actions},{\sl value1, value2, $\ldots$})} {gen} @@ -913,6 +959,9 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% Repeat {\sl actions} with {\sl variable} set successively to {\sl value1, value2, $\ldots$}, setting macro {\tt m4Lx} to 1, 2, $\ldots$, terminating if {\sl variable} is nul} +\macrodef{for\_}{for_}{({\sl start},{\sl end},{\sl increment},`{\sl actions}')} + {gen} + {integer for loop with index variable {\tt m4x} \seesect{Looping:}} \macrodef{FTcap}{FTcap}{({\sl chars})} {cct} {Feed-through capacitor; example of a composite element derived from @@ -923,17 +972,8 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% {cct} {fuse symbol, type$=$ {\tt A|B|C|D|S|HB|HC|SB} or {\tt dA=D}\seesect{Twoterminal:}} +% \Letter{G}% -\macrodef{g\_}{g_}{} - {gen} - {green color value} -\macrodef{G\_hht}{G_hht}{} - {log} - {gate half-height in {\tt L\_unit}s} -\macrodef{g\_fet}{g_fet}{(\linespec,R,P,{\sl shade spec})} - {cct} - {left or right, N or P graphene FET, without or with shading - \seesect{Semiconductors:}} \macrodef{gap}{gap}{(\linespec,{\sl fill},A)} {cct} {gap with (filled) dots, A=chopped arrow between dots\seesect{Twoterminal:}} @@ -941,6 +981,16 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% {gen} {initialize environment for general diagrams (customizable, reads {\tt libgen.m4})} +\macrodef{g\_fet}{g_fet}{(\linespec,R,P,{\sl shade spec})} + {cct} + {left or right, N or P graphene FET, without or with shading + \seesect{Semiconductors:}} +\macrodef{g\_}{g_}{} + {gen} + {green color value} +\macrodef{G\_hht}{G_hht}{} + {log} + {gate half-height in {\tt L\_unit}s} \macrodef{glabel\_}{glabel_}{} {cct} {internal general labeller} @@ -978,10 +1028,12 @@ B|b|CR|D|G|L|LE[R]|P[R]|S|Sh|T|U|V|v|w|Z|chars,% {Gyrator two-port wrapper for {\tt nport}, {\tt N} omits pin dots; {\tt V} gives a vertical orientation \seesect{Composite:}} +% \Letter{H}% -\macrodef{H\_ht}{H_ht}{} - {log} - {hysteresis symbol dimension in {\tt L\_unit}s} +\macrodef{hatchbox}{hatchbox}{({\sl boxspec,hashsep,hatchspec})} + {gen} + {Manhattan box with 45 degree hatching, e.g., + {\tt hatchbox(outlined "blue",{},dashed outlined "green" thick 0.4)}} \macrodef{Header}{Header}{(1|2,{\sl rows,wid,ht,box attributes})} {log} {Header block with 1 or 2 columns and square Pin 1: @@ -995,17 +1047,6 @@ n|e|s|w,{\sl length})} {log} {General pin for {\tt Header} macro; arg 4 specifies pin direction with respect to the current drawing direction)} -\macrodef{hatchbox}{hatchbox}{({\sl boxspec,hashsep,hatchspec})} - {gen} - {Manhattan box with 45 degree hatching, e.g., - {\tt hatchbox(outlined "blue",,dashed outlined "green" thick 0.4)}} -\macrodef{heater}{heater}{({\sl linespec, ndivisions|keys, wid, ht, - boxspec}|[E[R][T]])} - {cct} - {Heater element\seesect{Twoterminal:}. If arg 5 contains {\tt E,} - draws an {\tt heatere({\sl linespec, keys,} [R][T]),} - otherwise a - {\tt heatert({\sl linespec, nparts, wid, ht, boxspec})}} \macrodef{heatere}{heatere}{({\sl linespec, keys,} [R][T])} {cct} {Heater element with curved sides\seesect{Twoterminal:}. @@ -1016,6 +1057,13 @@ n|e|s|w,{\sl length})} {\tt wdth={\sl expr};} (default {\tt lgth*2/5}); {\tt cycles={\sl expr};} {\tt line={\sl attributes};} (e.g., {\tt dotted, dashed, outlined})} +\macrodef{heater}{heater}{({\sl linespec, ndivisions|keys, wid, ht, + boxspec}|[E[R][T]])} + {cct} + {Heater element\seesect{Twoterminal:}. If arg 5 contains {\tt E,} + draws an {\tt heatere({\sl linespec, keys,} [R][T]),} + otherwise a + {\tt heatert({\sl linespec, nparts, wid, ht, boxspec})}} \macrodef{heatert}{heatert}{({\sl linespec, nparts|keys, wid, ht, boxspec})} {cct} {Two-terminal rectangular heater element\seesect{Twoterminal:}. @@ -1026,13 +1074,16 @@ n|e|s|w,{\sl length})} {\tt box={\sl body attributes};} (e.g., {\tt dotted, dashed, outlined, shaded}). Args 3--5 are unused if any key is given} -\macrodef{hex\_digit}{hex_digit}{($n$)} - {gen} - {hexadecimal digit for $0 \leq n < 16$} \macrodef{hexadecimal\_}{hexadecimal_}{($n$, [$m$])} {gen} {hexadecimal representation of $n,$ left padded to $m$ digits if the second argument is nonblank} +\macrodef{hex\_digit}{hex_digit}{($n$)} + {gen} + {hexadecimal digit for $0 \leq n < 16$} +\macrodef{H\_ht}{H_ht}{} + {log} + {hysteresis symbol dimension in {\tt L\_unit}s} \macrodef{hlth}{hlth}{} {gen} {current line half thickness in drawing units} @@ -1042,6 +1093,7 @@ n|e|s|w,{\sl length})} \macrodef{ht\_}{ht_}{} {gen} {height relative to current direction} +% \Letter{I}% \macrodef{ifdpic}{ifdpic}{({\sl if true},{\sl if false})} {gen} @@ -1086,9 +1138,6 @@ n|e|s|w,{\sl length})} {cct} {left or right IGBT, L=alternate gate type, D=parallel diode, dD=dotted connections } -\macrodef{in\_\_}{in__}{} - {gen} - {absolute inches} \macrodef{inductor}{inductor}{(\linespec, W|L, {\sl cycles}, M[n]|P[n]|K[n], {\sl loop wid})} {cct} @@ -1099,12 +1148,12 @@ n|e|s|w,{\sl length})} {\sl M4Core1, M4Core2,} $\ldots$; arg5: loop width (default L,W: {\tt dimen\_}/5; other: {\tt dimen\_}/8) \seesect{Twoterminal:}} +\macrodef{in\_\_}{in__}{} + {gen} + {absolute inches} \macrodef{inner\_prod}{inner_prod}{({\sl linear obj},{\sl linear obj})} {gen} {inner product of (x,y) dimensions of two linear objects} -\macrodef{Int\_}{Int_}{} - {gen} - {corrected (old) gpic $int()$ function} \macrodef{integrator}{integrator}{(\linespec,{\sl size})} {cct} {integrating amplifier\seesect{Twoterminal:}} @@ -1115,23 +1164,27 @@ n|e|s|w,{\sl length})} \macrodef{Intersect\_}{Intersect_}{({\sl Name1},{\sl Name2})} {gen} {intersection of two named lines} +\macrodef{Int\_}{Int_}{} + {gen} + {corrected (old) gpic $int()$ function} \macrodef{IOdefs}{IOdefs}{(\linespec,{\sl label},[P|N]*,L|R) } {log} {Define locations {\sl label}{\tt 1}, $\ldots$ {\sl label}{\tt n} along the line; {\tt P}= label only; {\tt N}=with {\tt NOT\_circle}; {\tt R}=circle to right of current direction } +% \Letter{J}% -\macrodef{j\_fet}{j_fet}{(\linespec,L|R,P,E)} - {cct} - {left or right, N or P JFET, without or with envelope - \seesect{Semiconductors:}} \macrodef{jack}{jack}{(U|D|L|R|{\sl degrees},{\sl chars})} {cct} {arg1: drawing direction; string arg2: {\tt R}=right orientation, one or more {\tt L[M][B]} for L and auxiliary contacts with make or break points; {\tt S[M][B]} for S and auxiliary contacts \seesect{Composite:}} +\macrodef{j\_fet}{j_fet}{(\linespec,L|R,P,E)} + {cct} + {left or right, N or P JFET, without or with envelope + \seesect{Semiconductors:}} \macrodef{jumper}{jumper}{({\sl linespec, chars}|{\sl keys})} {cct} { Two-terminal solder jumper with named body parts. @@ -1147,19 +1200,22 @@ n|e|s|w,{\sl length})} {\tt wdth=}{\sl expr}; {\tt name=}{\sl chars} (the body name)% \seesect{Twoterminal:}} +% \Letter{K}% \macrodef{KelvinR}{KelvinR}{({\sl cycles},[R],{\sl cycle wid})} {cct} {IEEE resistor in a {\tt [ ]} block with Kelvin taps {\sl T1} and {\sl T2} \seesect{Composite:}} +% \Letter{L}% -\macrodef{L\_unit}{L_unit}{} - {log} - {logic-element grid size} \macrodef{lamp}{lamp}{(\linespec, [R][T])} {cct} {Two-terminal incandescent lamp. {\tt T} truncates leads to the body width. \seesect{Twoterminal:}} +\macrodef{langle}{langle}{({\sl Start, End})} + {gen} + {Angle in radians from horizontal of the line from {\sl Start} + to {\sl End}.} \macrodef{larrow}{larrow}{({\sl label},{\tt ->|<-},{\sl dist})} {cct} {arrow {\sl dist} to left of last-drawn 2-terminal element @@ -1177,13 +1233,13 @@ n|e|s|w,{\sl length})} \macrodef{left\_}{left_}{} {gen} {left with respect to current direction \seesect{Placing:}} -\macrodef{length3D}{length3D}{(x,y,z)} - {3D} - {Euclidean length of triple x,y,z} \macrodef{LEintersect}{LEintersect}{({\sl line name, Centre, ellipse wid, ellipse ht}, [R])} {gen} { First (second if arg5 is R) intersection of a line with an ellipse} +\macrodef{length3D}{length3D}{(x,y,z)} + {3D} + {Euclidean length of triple x,y,z} \macrodef{LEtangent}{LEtangent}{({\sl Pos1, Centre, ellips wid, ellipse ht} [R])} {gen} @@ -1218,13 +1274,13 @@ n|e|s|w,{\sl length})} {gen} {the angle of a line or move from {\tt .start} to {\tt .end} of a linear object (in degrees if arg2={\tt d})} +\macrodef{linethick\_}{linethick_}{({\sl number})} + {gen} + {set line thickness in points} \macrodef{lin\_leng}{lin_leng}{({\sl line-reference})} {gen} {length of a line, equivalent to {\sl line-reference}{\tt .len} with dpic} -\macrodef{linethick\_}{linethick_}{({\sl number})} - {gen} - {set line thickness in points} \macrodef{ljust\_}{ljust_}{} {gen} {ljust with respect to current direction} @@ -1243,44 +1299,48 @@ n|e|s|w,{\sl length})} \macrodef{loc\_}{loc_}{({\sl x}, {\sl y})} {gen} {location adjusted for current direction} -\macrodef{log\_init}{log_init}{} - {log} - {initialize environment for logic diagrams - (customizable, reads {\tt liblog.m4})} \macrodef{log10E\_}{log10E_}{} {gen} {constant $\log_{10}(e)$} \macrodef{loge}{loge}{} {gen} {logarithm, base $e$} +\macrodef{log\_init}{log_init}{} + {log} + {initialize environment for logic diagrams + (customizable, reads {\tt liblog.m4})} \macrodef{Loopover\_}{Loopover_}{(`{\sl variable}',{\sl actions},{\sl value1, value2, $\ldots$})} {gen} {Repeat {\sl actions} with {\sl variable} set successively to {\sl value1, value2, $\ldots$}, setting macro {\tt m4Lx} to 1, 2, $\ldots$, terminating if {\sl variable} is nul} -\macrodef{lp\_xy}{lp_xy}{} - {log} - {coordinates used by {\tt lg\_pin}} \macrodef{lpop}{lpop}{({\sl xcoord}, {\sl ycoord}, {\sl radius}, {\sl fill}, {\sl zero ht})} {gen} {for lollipop graphs: filled circle with stem to (xcoord,zeroht)} +\macrodef{lp\_xy}{lp_xy}{} + {log} + {coordinates used by {\tt lg\_pin}} \macrodef{lswitch}{lswitch}{( \linespec, L|R, {\sl chars} )} {cct} {knife switch R=right orientation (default L=left); {\sl chars}=[O{\tt|}C][D][K][A] O=opening arrow; C=closing arrow; D=dots; K=closed switch; A=blade arrowhead \seesect{Twoterminal:}} +\macrodef{lthick}{lthick}{} + {gen} + {current line thickness in drawing units} \macrodef{lt\_}{lt_}{} {gen} {left with respect to current direction} \macrodef{LT\_symbol}{LT_symbol}{(U|D|L|R|{\sl degrees})} {log} {logic-gate triangle symbol} -\macrodef{lthick}{lthick}{} - {gen} - {current line thickness in drawing units} +\macrodef{L\_unit}{L_unit}{} + {log} + {logic-element grid size} +% \Letter{M}% \macrodef{m4\_arrow}{m4_arrow}{(\linespec,{\sl ht},{\sl wid})} {gen} @@ -1360,9 +1420,6 @@ n|e|s|w,{\sl length})} \macrodef{Mux\_ht}{Mux_ht}{} {cct} {Mux height parameter in {\tt L\_unit}s} -\macrodef{Mux\_wid}{Mux_wid}{} - {cct} - {Mux width parameter in {\tt L\_unit}s} \macrodef{Mux}{Mux}{({\sl n},{\sl label}, {\tt [L][B|H|X][N[{\sl n}]|S[{\sl n}]][[N]OE], {\sl wid},{\sl ht}})} {log} @@ -1373,28 +1430,23 @@ n|e|s|w,{\sl length})} at the top (i.e., to the left of the drawing direction), {\tt S[{\sl n}]} puts the Sel inputs at the bottom (default) {\tt OE} ({\tt N=}negated) {\tt OE} pin \seesect{Logicgates:}} +\macrodef{Mux\_wid}{Mux_wid}{} + {cct} + {Mux width parameter in {\tt L\_unit}s} \macrodef{Mx\_pins}{Mx_pins}{} {log} {max number of gate inputs without wings} +% \Letter{N}% -\macrodef{n\_}{n_}{} - {gen} - {.n with respect to current direction} -\macrodef{N\_diam}{N_diam}{} - {log} - {diameter of `not' circles in {\tt L\_unit}s} -\macrodef{N\_rad}{N_rad}{} - {log} - {radius of `not' circles in {\tt L\_unit}s} \macrodef{NAND\_gate}{NAND_gate}{({\sl n},N)} {log} {`nand' gate, 2 or {\sl n\/} inputs; N=negated input. Otherwise, arg1 can be a sequence of letters {\tt P|N} to define normal or negated inputs. \seesect{Logicgates:}} -\macrodef{ne\_}{ne_}{} - {gen} - {.ne with respect to current direction} +\macrodef{N\_diam}{N_diam}{} + {log} + {diameter of `not' circles in {\tt L\_unit}s} \macrodef{NeedDpicTools}{NeedDpicTools}{} {gen} {executes {\tt copy "HOMELIB\_/dpictools.pic"} if the file has @@ -1402,15 +1454,21 @@ n|e|s|w,{\sl length})} \macrodef{neg\_}{neg_}{} {gen} {unary negation} +\macrodef{ne\_}{ne_}{} + {gen} + {.ne with respect to current direction} +\macrodef{n\_}{n_}{} + {gen} + {.n with respect to current direction} +\macrodef{norator}{norator}{(\linespec,{\sl width},{\sl ht})} + {cct} + { norator two-terminal element \seesect{Twoterminal:}} \macrodef{NOR\_gate}{NOR_gate}{({\sl n},N)} {log} {`nor' gate, 2 or {\sl n\/} inputs; N=negated input. Otherwise, arg1 can be a sequence of letters {\tt P|N} to define normal or negated inputs. \seesect{Logicgates:}} -\macrodef{norator}{norator}{(\linespec,{\sl width},{\sl ht})} - {cct} - { norator two-terminal element \seesect{Twoterminal:}} \macrodef{NOT\_circle}{NOT_circle}{} {log} {`not' circle} @@ -1441,6 +1499,9 @@ nw,nn,ne,ns,space ratio,pin lgth,style, other commands})} (default 2), and arg 7 is the pin length. Set arg 8 to N to omit the dots on the port pins. Arguments 1 and 9 allow customizations \seesect{Composite:}} +\macrodef{N\_rad}{N_rad}{} + {log} + {radius of `not' circles in {\tt L\_unit}s} \macrodef{nterm}{nterm}{({\sl box spec{\tt ;}other commands, nw,nn,ne,ns,pin lgth,style, other commands})} {cct} @@ -1463,6 +1524,7 @@ nw,nn,ne,ns,pin lgth,style, other commands})} Otherwise, arg1 can be a sequence of letters {\tt P|N} to define normal or negated inputs. \seesect{Logicgates:}} +% \Letter{O}% \macrodef{opamp}{opamp}{(\linespec,{\sl label},{\sl label},{\sl size},{\sl @@ -1495,9 +1557,9 @@ label},{\sl size},{\sl \macrodef{OR\_rad}{OR_rad}{} {log} {radius of OR input face in {\tt L\_unit}s} +% \Letter{P}% -\macrodef{parallel\_}{parallel_}{(\char96{\sl -elementspec}\char39,% +\macrodef{parallel\_}{parallel_}{(\char96{\sl elementspec}\char39,% \char96{\sl elementspec}\char39 $\ldots$)} {cct} { Parallel combination of two-terminal elements in a {\tt [ @@ -1512,20 +1574,6 @@ elementspec}\char39,% element Sep={\sl val}; applies only to that branch. An element may have normal arguments but should not change the drawing direction. \seesect{Seriesandparallel:}} -%\macrodef{par\_}{par_}{({\sl element},{\sl element},{\sl separation})} -% {cct} % {two same-direction, same-length elements in parallel} -\macrodef{proximity}{proximity}{(\sl linespec)} - {cct} - {proximity detector (= {\tt consource(,P)})} -\macrodef{pc\_\_}{pc__}{} - {gen} - {absolute points} -\macrodef{pvcell}{pvcell}{({\sl linespec, width, height})} - {cct} - {PV cell} -\macrodef{px\_\_}{px__}{} - {gen} - {absolute SVG screen pixels} \macrodef{pconnex}{pconnex}{(R|L|U|D|{\sl degrees},{\sl chars})} {cct} {power connectors, arg 1: drawing direction; {\sl chars:} @@ -1533,6 +1581,19 @@ elementspec}\char39,% 3 prong, B=box, C=circle, {\tt P}= PC connector, {\tt D}= 2-pin connector, {\tt G|GC}= GB 3-pin, {\tt J}= 110V 2-pin \seesect{Composite:}} +\macrodef{pc\_\_}{pc__}{} + {gen} + {absolute points} +\macrodef{perpto}{perpto}{({\sl Pos1, Line, Point})} + {gen} + {{\sl Point} is the label for the point on {\sl Line} of the + perpendicular + from {\sl Point} to {\sl Line}.} +\macrodef{PerpTo}{PerpTo}{({\sl Pos1, Pos2, Pos3})} + {gen} + {The point between Pos2 and Pos3 of intersection of the perpendicular + to Pos1, i.e., the perpendicular projection of Pos1 onto the line + from Pos2 to Pos3.} \macrodef{pi\_}{pi_}{} {gen} {$\pi$} @@ -1546,26 +1607,12 @@ elementspec}\char39,% \macrodef{point\_}{point_}{({\sl angle})} {gen} {(radians) set direction cosines} -\macrodef{perpto}{perpto}{({\sl Pos1, Line, Point})} - {gen} - {{\sl Point} is the label for the point on {\sl Line} of the - perpendicular - from {\sl Point} to {\sl Line}.} -\macrodef{PerpTo}{PerpTo}{({\sl Pos1, Pos2, Pos3})} - {gen} - {The point between Pos2 and Pos3 of intersection of the perpendicular - to Pos1, i.e., the perpendicular projection of Pos1 onto the line - from Pos2 to Pos3.} \macrodef{Point\_}{Point_}{({\sl integer})} {gen} {sets direction cosines in degrees \seesect{Placing:}} \macrodef{polar\_}{polar_}{({\sl x},{\sl y})} {gen} {rectangular-to polar conversion} -\macrodef{langle}{langle}{({\sl Start, End})} - {gen} - {Angle in radians from horizontal of the line from {\sl Start} - to {\sl End}.} \macrodef{potentiometer}{potentiometer}{(\linespec,% {\sl cycles},{\sl fractional pos},{\sl length},$\cdots$)} {cct} {resistor with taps T1, T2, $\ldots$ @@ -1580,17 +1627,20 @@ elementspec}\char39,% {3D} {3D to 2D projection onto the plane perpendicular to the view vector with angles defined by {\tt setview({\sl azim, elev})}} +\macrodef{proximity}{proximity}{(\sl linespec)} + {cct} + {proximity detector (= {\tt consource(,P)})} \macrodef{psset\_}{psset_}{({\sl PSTricks settings})} {gen} {set PSTricks parameters} -\macrodef{pt\_\_}{pt__}{} - {gen} - {\TeX\ point-size factor, in scaled inches, ({\tt *scale/72.27})} \macrodef{PtoL}{PtoL}{({\sl position}, U|D|L|R|{\sl degrees}, {\sl length}) } {gen} {Evaluates to {\tt from {\sl position} to {\sl position} + Rect\_({\sl length, angle}) } from the polar-coordinate data in the arguments } +\macrodef{pt\_\_}{pt__}{} + {gen} + {\TeX\ point-size factor, in scaled inches, ({\tt *scale/72.27})} \macrodef{ptrans}{ptrans}{(\linespec, [R|L])} {cct} {pass transistor; {\tt L=} left orientation @@ -1613,10 +1663,14 @@ elementspec}\char39,% which must contain no semicolons and the default values contain no colons. Macro {\tt pushkey\_} is applied to each of the terms in order. \seesect{Macroarguments:}} -\Letter{R}% -\macrodef{r\_}{r_}{} +\macrodef{pvcell}{pvcell}{({\sl linespec, width, height})} + {cct} + {PV cell} +\macrodef{px\_\_}{px__}{} {gen} - {red color value} + {absolute SVG screen pixels} +% +\Letter{R}% \macrodef{rarrow}{rarrow}{({\sl label,{\tt ->|<-},{\sl dist}})} {cct} {arrow {\sl dist} to right of last-drawn 2-terminal element @@ -1633,14 +1687,6 @@ elementspec}\char39,% {Enclosed reed two-terminal contact; {\tt R}=right orientation; {\tt C}=closed contact; e.g., {\tt reed(,,dimen\_/5,shaded "lightgreen"} \seesect{Composite:}} -\macrodef{relay}{relay}{({\sl number of poles, chars})} - {cct} - {relay: n poles (default 1), {\sl chars:} {\tt O}=normally open, - {\tt C}=normally closed, {\tt P}=three position, default double - throw, {\tt L}=drawn left (default), {\tt R}=drawn right, {\tt - Th}=thermal. Argument 3={\tt [L|R]} is deprecated but works for - backward compatibility - \seesect{Composite:}} \macrodef{relaycoil}{relaycoil}{({\sl chars, wid, ht,} R|L|U|D|{\sl degrees})} {cct} @@ -1654,6 +1700,14 @@ degrees})} PO}=polarized; {\tt RM}=remanent; {\tt RH}=remanent; {\tt TH}=thermal; {\tt EL}=electronic \seesect{Composite:}} +\macrodef{relay}{relay}{({\sl number of poles, chars})} + {cct} + {relay: n poles (default 1), {\sl chars:} {\tt O}=normally open, + {\tt C}=normally closed, {\tt P}=three position, default double + throw, {\tt L}=drawn left (default), {\tt R}=drawn right, {\tt + Th}=thermal. Argument 3={\tt [L|R]} is deprecated but works for + backward compatibility + \seesect{Composite:}} \macrodef{resetdir\_}{resetdir_)}{} {gen} {resets direction set by {\tt setdir\_}} @@ -1699,21 +1753,14 @@ degrees})} rgbstring(0.1,0.2,0.7) shaded rgbstring(0.75,0.5,0.25)}. For those postprocessors that allow it, there can be one argument which is the name of a defined color} -\macrodef{right\_}{right_}{} - {gen} - {set current direction right \seesect{Placing:}} \macrodef{RightAngle}{RightAngle}{({\sl Pos1, Pos2, Pos3, line len, attributes})} {gen} {Draw a right-angle symbol at {\sl Pos2}, of size given by arg4. Arg5 = line attributes, e.g., {\tt outlined "gray"}} -\macrodef{r\_text}{r_text}{({\sl degrees},{\sl text},at {\sl position})} +\macrodef{right\_}{right_}{} {gen} - {Rotate text by arg1 degrees (provides a single command for - PSTricks, PGF, or SVG only) placed at position in arg3. - The first argument is a decimal constant (not an expression) and - the text is a simple string without quotes. - \seesect{Interaction:}, \seesect{Pstricks:}} + {set current direction right \seesect{Placing:}} \macrodef{rjust\_}{rjust_}{} {gen} {right justify with respect to current direction} @@ -1735,12 +1782,6 @@ degrees})} {3D} {rotates x,y,z about y axis} \macrodef{rot3Dz}{rot3Dz}{({\sl radians,x,y,z})} {3D} {rotates x,y,z about z axis} -\macrodef{Rot\_}{Rot_}{({\sl position, degrees})} - {gen} - {rotate position by degrees} -\macrodef{rot\_}{rot_}{({\sl x, y, angle})} - {gen} - {rotate {\sl x,y} by theta radians} \macrodef{rotbox}{rotbox}{({\sl wid,ht,type},[r|t={\sl val}])} {gen} {box oriented in current direction in {\tt [ ]} block; @@ -1754,6 +1795,12 @@ degrees})} {ellipse oriented in current direction in {\tt [ ]} block; e.g. {\tt Point\_(45); rotellipse(,{},dotted fill\_(0.9)).} Defined internal locations: N, S, E, W.} +\macrodef{Rot\_}{Rot_}{({\sl position, degrees})} + {gen} + {rotate position by degrees} +\macrodef{rot\_}{rot_}{({\sl x, y, angle})} + {gen} + {rotate {\sl x,y} by theta radians} \macrodef{round}{round}{(at {\sl location,line thickness,attributes})} {gen} {filled circle for rounded corners; attributes={\tt colored @@ -1766,6 +1813,9 @@ degrees})} \macrodef{rpos\_}{rpos_}{({\sl position})} {gen} {Here + {\sl position}} +\macrodef{r\_}{r_}{} + {gen} + {red color value} \macrodef{rrot\_}{rrot_}{({\sl x, y, angle})} {gen} {\tt Here + vrot\_({\sl x, y, cos(angle), sin(angle))}} @@ -1785,63 +1835,49 @@ degrees})} \macrodef{rsvec\_}{rsvec_}{({\sl position})} {gen} {Here + {\sl position}} -\macrodef{rt\_}{rt_}{} +\macrodef{r\_text}{r_text}{({\sl degrees},{\sl text},at {\sl position})} {gen} - {right with respect to current direction} + {Rotate text by arg1 degrees (provides a single command for + PSTricks, PGF, or SVG only) placed at position in arg3. + The first argument is a decimal constant (not an expression) and + the text is a simple string without quotes. + \seesect{Interaction:}, \seesect{Pstricks:}} \macrodef{rtod\_\_}{rtod__}{} {gen} {constant, degrees/radian} \macrodef{rtod\_}{rtod_}{} {gen} {constant, degrees/radian} +\macrodef{rt\_}{rt_}{} + {gen} + {right with respect to current direction} \macrodef{rvec\_}{rvec_}{({\sl x},{\sl y})} {gen} {location relative to current direction} +% \Letter{S}% -\macrodef{s\_}{s_}{} - {gen} - {.s with respect to current direction} -\macrodef{s\_box}{s_box}{({\sl text},{\sl expr1},$\cdots$)} - {gen} - {generate dimensioned text string using {\tt\char92{}boxdims} from - {\tt boxdims.sty}. Two or more args are passed to {\tt sprintf()} - (default 90) degrees \seesect{Interaction:}} -\macrodef{s\_dp}{s_dp}{({\sl name},{\sl default})} - {gen} - {depth of the most recent (or named) {\tt s\_box} - \seesect{Interaction:}} -\macrodef{s\_ht}{s_ht}{({\sl name},{\sl default})} - {gen} - {height of the most recent (or named) {\tt s\_box} - \seesect{Interaction:}} -\macrodef{s\_init}{s_init}{({\sl name})} - {gen} - {initialize {\tt s\_box} string label to {\sl name} which should - be unique - \seesect{Interaction:}} -\macrodef{s\_name}{s_name}{} - {gen} - {the value of the last {\tt s\_init} argument - \seesect{Interaction:}} -\macrodef{s\_wd}{s_wd}{({\sl name},{\sl default})} - {gen} - {width of the most recent (or named) {\tt s\_box} - \seesect{Interaction:}} \macrodef{sarrow}{sarrow}{(\linespec,{\sl keys})} {gen} {Single-segment, single-headed special arrows. The {\sl keys} are {\tt type=}{\tt O[pen]} (default) - | {\tt D[iamond]} | {\tt C[rowfoot]} | {\tt P[lain]}{\tt ;} + | {\tt D[iamond]} | {\tt C[rowfoot]} | {\tt P[lain]} + | {\tt R[ight]} | {\tt L[eft]} {\tt ;} {\tt wdth=}{\tt expression}{\tt ;} (default {\tt arrowwid}) {\tt lgth=}{\tt expression}{\tt ;} (default {\tt arrowht}) {\tt shaft=}{\sl shaft attributes} (e.g., {\tt dashed}){\tt ;} {\tt head=}{\sl head attributes} (e.g., {\tt shaded}){\tt ;} + {\tt name=}{\sl Name}{\tt ;} (default {\sl Sarrow\_}) \seesect{Macroarguments:}} \macrodef{savem4dir}{savem4dir}{([`{\sl stack name}'])} {gen} {Stack m4 direction parameters in the named stack (default {\tt `savm4dir\_'})} +\macrodef{s\_box}{s_box}{({\sl text},{\sl expr1},$\cdots$)} + {gen} + {generate dimensioned text string using {\tt\char92{}boxdims} from + {\tt boxdims.sty}. Two or more args are passed to {\tt sprintf()} + (default 90) degrees \seesect{Interaction:}} \macrodef{sbs}{sbs}{({\sl linespec, chars, label})} {cct} {Wrapper to place an SBS thyristor as a two-terminal element with @@ -1860,9 +1896,10 @@ degrees})} {Wrapper to place an SCS thyristor as a two-terminal element with {\tt [ ]} block label given by the third argument \seesect{Semiconductors:}} -\macrodef{se\_}{se_}{} +\macrodef{s\_dp}{s_dp}{({\sl name},{\sl default})} {gen} - {.se with respect to current direction} + {depth of the most recent (or named) {\tt s\_box} + \seesect{Interaction:}} \macrodef{series\_}{series_}{({\sl elementspec}, {\sl elementspec}, $\ldots$)} {cct} @@ -1873,6 +1910,9 @@ $\ldots$)} [rlabel($\ldots$);] [b\_current($\ldots$);]}. Internal points {\tt Start}, {\tt End}, and {\tt C} are defined \seesect{Seriesandparallel:} } +\macrodef{se\_}{se_}{} + {gen} + {.se with respect to current direction} \macrodef{setdir\_}{setdir_}{(R|L|U|D|{\sl degrees}, {\sl default} U|D|R|L|{\sl degrees})} {gen} @@ -1881,11 +1921,6 @@ $\ldots$)} resetdir\_}). The directions may be spelled out, i.e., Right, Left, $\ldots$ \seesect{Seriesandparallel:}} -\macrodef{setrgb}{setrgb}{({\sl red value, green value, blue value},[{\sl - name}])} - {gen} - {define colour for lines and text, optionally named (default - {\tt lcspec}); \seesect{Semiconductors:}} \macrodef{setkey\_}{setkey_}{({\sl string, key, default,}[N])} {gen} {Key-value definition, like {\tt pushkey\_()} but the resulting @@ -1896,14 +1931,14 @@ $\ldots$)} {Multiple key-value definition using {\tt define()} rather than {\tt pushdef().} See macro {\tt pushkeys\_}. \seesect{Macroarguments:}} +\macrodef{setrgb}{setrgb}{({\sl red value, green value, blue value},[{\sl + name}])} + {gen} + {define colour for lines and text, optionally named (default + {\tt lcspec}); \seesect{Semiconductors:}} \macrodef{setview}{setview}{({\sl azimuth degrees},{\sl elevation degrees})} {3D} {set projection viewpoint} -\macrodef{sfg\_init}{sfg_init}{({\sl default line len, node rad, -arrowhd len, - arrowhd wid}), (reads {\tt libcct.m4})} {cct} - {initialization of signal - flow graph macros} \macrodef{sfgabove}{sfgabove}{} {cct} {like above but with extra space} @@ -1916,6 +1951,11 @@ justification},cw|ccw, \macrodef{sfgbelow}{sfgbelow}{} {cct} {like below but with extra space} +\macrodef{sfg\_init}{sfg_init}{({\sl default line len, node rad, +arrowhd len, + arrowhd wid}), (reads {\tt libcct.m4})} {cct} + {initialization of signal + flow graph macros} \macrodef{sfgline}{sfgline}{(\linespec,{\sl text},{\sl text justification})} {cct} @@ -1932,11 +1972,6 @@ justification})} {cct} {self-loop drawn at angle {\sl angle} from a node, with text label and a size-adjustment parameter } -\macrodef{shade}{shade}{({\sl gray value},{\sl closed line specs})} - {gen} - {Fill arbitrary closed curve. Note: when producing pdf via pdflatex, line - thickness changes within this macro must be made via the {\tt linethick} - environment variable rather than by the {\tt thickness} line attribute} \macrodef{shadebox}{shadebox}{(box {\sl attributes, shade width})} {gen} {Box with edge shading. Arg2 is in points. See also {\tt shaded} } @@ -1950,6 +1985,11 @@ justification})} the form 0, r0,g0,b0, {\sl frac1},r1,g1,b1, {\sl frac2},r2,g2,b2, \ldots 1,rn,gn,bn with $0 < \hbox{\sl frac1} < \hbox{\sl frac2} \ldots 1$ } +\macrodef{shade}{shade}{({\sl gray value},{\sl closed line specs})} + {gen} + {Fill arbitrary closed curve. Note: when producing pdf via pdflatex, line + thickness changes within this macro must be made via the {\tt linethick} + environment variable rather than by the {\tt thickness} line attribute} \macrodef{shadowed}{shadowed}{(box|circle|ellipse|line, {\sl position spec, keys})} {gen} @@ -1969,6 +2009,10 @@ justification})} (default) to enclose the element body; L for the left side with respect to drawing direction, R for right. Internal points {\tt .Start, .End,} and {\tt .C} are defined} +\macrodef{s\_ht}{s_ht}{({\sl name},{\sl default})} + {gen} + {height of the most recent (or named) {\tt s\_box} + \seesect{Interaction:}} \macrodef{SIdefaults}{SIdefaults}{} {gen} {Sets {\tt scale = 25.4} for drawing units in mm, and sets @@ -1979,15 +2023,20 @@ justification})} \macrodef{sign\_}{sign_}{({\sl number})} {gen} {sign function} -\macrodef{Sin}{Sin}{({\sl integer})} - {gen} - {sine function, {\sl integer\/} degrees} \macrodef{sinc}{sinc}{({\sl number})} {gen} {the $\hbox{sinc}(x)$ function} \macrodef{sind}{sind}{({\sl arg})} {gen} {sine of an expression in degrees} +\macrodef{s\_init}{s_init}{({\sl name})} + {gen} + {initialize {\tt s\_box} string label to {\sl name} which should + be unique + \seesect{Interaction:}} +\macrodef{Sin}{Sin}{({\sl integer})} + {gen} + {sine function, {\sl integer\/} degrees} \macrodef{sinusoid}{sinusoid}{({\sl amplitude, frequency, phase, tmin, tmax, linetype})} {gen} @@ -2234,6 +2283,36 @@ justification})} {\tt size=}{\sl expr} (default {\tt ht dimen\_/3}). \seesect{SingleLine:}} % +\macrodef{sl\_transformer3}{sl_transformer3}{({\sl linespec, keys, + breaker keys, symbol keys})} + {SLD} + {Composite (block) SLD element: argument 1 is a \linespec\ that can be used + to set the direction and distance between primary terminals but not + position. + + Argument 2 contains semicolon (;)-separated key-value body attributes: + {\tt name={\sl{}Name}} (default {\sl Body}); + {\tt type=S|C} (default {\tt S}); + {\tt scale={\sl expr}} (body size factor, default 1.0); + {\tt direct=L|R} (default {\tt L}) direction of the tertiary + circle and terminal relative to the drawing direction; + {\tt body={\sl circle attributes}}. + + Argument 3 is colon (:)-separated sequence of up to three breaker + attribute specifications for the input, output, and teriary breaker + in order. A null or blank means no breaker, {\tt tt\_breaker} + specifications otherwise. Default breaker names are {\sl BrI} + and {\sl BrO} as for + {\tt sl\_transformer,} and {\sl Br} for the third breaker. + + Argument 4 is colon (:)-separated sequence of up to three symbol + specifications for the input, output, and teriary circle + in order. A null or blank means no symbol; + {\tt Y} for a Y-symbol; + {\tt Delta} for a $\Delta$ symbol; + otherwise, other customization commands expanded in a {\tt \lbr\rbr} pair. + \seesect{SingleLine:}} +% \macrodef{sl\_transformer}{sl_transformer}{({\sl linespec, keys, input breaker keys, output breaker keys, input circle inner object, output circle inner object})} @@ -2273,35 +2352,6 @@ justification})} otherwise, other customization commands expanded in a {\tt \lbr\rbr} pair. \seesect{SingleLine:}} % -\macrodef{sl\_transformer3}{sl_transformer3}{({\sl linespec, keys, - breaker keys, symbol keys})} - {SLD} - {Composite (block) SLD element: argument 1 is a \linespec\ that can be used - to set the direction and distance between primary terminals but not - position. - - Argument 2 contains semicolon (;)-separated key-value body attributes: - {\tt name={\sl{}Name}} (default {\sl Body}); - {\tt type=S|C} (default {\tt S}); - {\tt scale={\sl expr}} (body size factor, default 1.0); - {\tt direct=L|R} (default {\tt L}) direction of the tertiary - circle and terminal relative to the drawing direction; - {\tt body={\sl circle attributes}}. - - Argument 3 is colon (:)-separated sequence of up to three breaker - attribute specifications for the input, output, and teriary breaker - in order. A null or blank means no breaker, {\tt tt\_breaker} - specifications otherwise. Default breaker names are {\sl BrI} - and {\sl BrO} as for - {\tt sl\_transformer,} and {\sl Br} for the third breaker. - - Argument 4 is colon (:)-separated sequence of up to three symbol - specifications for the input, output, and teriary circle - in order. A null or blank means no symbol; - {\tt Y} for a Y-symbol; - {\tt Delta} for a $\Delta$ symbol; - otherwise, other customization commands expanded in a {\tt \lbr\rbr} pair. - \seesect{SingleLine:}} \macrodef{sl\_ttbox}{sl_ttbox}{({\sl linespec, keys, input breaker keys, output breaker keys})} {SLD} @@ -2326,34 +2376,38 @@ justification})} except that the default breaker name is {\sl BrO}. \label{sl_ttbox}% \seesect{SingleLine:}} +\macrodef{s\_name}{s_name}{} + {gen} + {the value of the last {\tt s\_init} argument + \seesect{Interaction:}} +\macrodef{sourcerad\_}{sourcerad_}{} + {cct} + {default source radius} \macrodef{source}{source}{(\linespec, - V|v|I|i|AC|B|F|G|H|J|Q|L|N|P|S[C[r]]|E[r]]|T|X|U|{\sl other}, {\sl + V|v|I|i|ii|AC|B|F|G|H|J|Q|L|N|P|S[C[r]]|E[r]]|T|X|U|{\sl other}, {\sl diameter},R)} {cct} {source, blank or: - V = voltage source; v = alternate voltage source; I = - current source; i = alternate current source; AC = - AC source; B = bulb; F = fluorescent; G = generator; - H = step function; L = lamp; N = neon; P = pulse; - Q = charge; R = ramp; r = right orientation; S = - sinusoid; SC = quarter arc; SE = arc; T = triangle; - U = square-wave; X = interior X; other = custom - interior label or waveform; arg 4: R = reversed - polarity; arg 5 modifies the circle with e.g., - color or fill + V = voltage source; v = alternate voltage source; + I = current source; i = alternate current source; + ii = double arrow current source; AC = AC source; + B = bulb; F = fluorescent; G = generator; H = step + function; L = lamp; N = neon; P = pulse; Q = charge; + R = ramp; r = right orientation; S = sinusoid; + SC = quarter arc; SE = arc; T = triangle; U = + square-wave; X = interior X; other = custom interior + label or waveform; arg 4: R = reversed polarity; + arg 5 modifies the circle with e.g., color or fill \seesect{Twoterminal:}} -\macrodef{sourcerad\_}{sourcerad_}{} - {cct} - {default source radius} -\macrodef{sp\_}{sp_}{} - {gen} - {evaluates to medium space for gpic strings} \macrodef{speaker}{speaker}{( U|D|L|R|{\sl degrees},{\sl size},H)} {cct} {speaker, {\sl In1} to {\sl In7} defined; {\tt H}=horn \seesect{Composite:}} \macrodef{sprod3D}{sprod3D}{(a,x,y,z)} {3D} {scalar product of triple x,y,z by a} +\macrodef{sp\_}{sp_}{} + {gen} + {evaluates to medium space for gpic strings} \macrodef{sqrta}{sqrta}{({\sl arg})} {gen} {square root of the absolute value of {\sl arg}; i.e., @@ -2364,6 +2418,9 @@ justification})} with {\sl }n junctions labeled {\tt J1, ... J}{\sl n} placed around a circle with initial angle -90 deg (by default) with respect to the current drawing direction. The default diameter is {\tt dimen\_} } +\macrodef{s\_}{s_}{} + {gen} + {.s with respect to current direction} \macrodef{stackargs\_}{stackargs}{(`{\sl stackname}',{\sl args})} {gen} {Stack arg 2, arg 3, ... onto the named stack up to a blank arg} @@ -2398,11 +2455,11 @@ justification})} by nonblank {\sl separator} (default .). White space preceding the fields is ignored.} +\macrodef{sum3D}{sum3D}{({\sl x1,y1,z1,x2,y2,z2})} + {3D} {sum of two triples} \macrodef{sum\_}{sum_}{({\sl a},{\sl b})} {gen} {binary sum} -\macrodef{sum3D}{sum3D}{({\sl x1,y1,z1,x2,y2,z2})} - {3D} {sum of two triples} \macrodef{sus}{sus}{({\sl linespec, chars, label})} {cct} {Wrapper to place an SUS thyristor as a two-terminal element with @@ -2411,9 +2468,10 @@ justification})} \macrodef{svec\_}{svec_}{({\sl x},{\sl y})} {log} {scaled and rotated grid coordinate vector} -\macrodef{sw\_}{sw_}{} +\macrodef{s\_wd}{s_wd}{({\sl name},{\sl default})} {gen} - {.sw with respect to current direction} + {width of the most recent (or named) {\tt s\_box} + \seesect{Interaction:}} \macrodef{switch}{switch}{(\linespec,L|R,[C|O][D],[B|D])} {cct} {SPST switch (wrapper for bswitch, lswitch, and dswitch), @@ -2423,10 +2481,11 @@ justification})} if arg4=B (button switch): arg3 = O{\tt|}C O=normally open, C=normally closed, if arg4=D: arg3 = same as for dswitch \seesect{Twoterminal:}} +\macrodef{sw\_}{sw_}{} + {gen} + {.sw with respect to current direction} +% \Letter{T}% -\macrodef{ta\_xy}{ta_xy}{({\sl x, y})} - {cct} - {macro-internal coordinates adjusted for {\tt L|R}} \macrodef{tapped}{tapped}{(`{\sl two-terminal element}', [{\sl arrowhd} | type={\sl arrowhd};name={\sl Name}], {\sl fraction, length, fraction, length,} $\cdots$)} @@ -2440,6 +2499,9 @@ justification})} or Name1, Name2, $\cdots$ if specified. Internal block names are {\tt .Start, .End,} and {.C} corresponding to the drawn element, and the tap names \seesect{Composite:} } +\macrodef{ta\_xy}{ta_xy}{({\sl x, y})} + {cct} + {macro-internal coordinates adjusted for {\tt L|R}} \macrodef{tbox}{tbox}{({\sl text,wid,ht},<|>|<>,{\sl type})} {cct} {Pointed terminal box. The {\sl text} is placed at the rectangular @@ -2520,12 +2582,6 @@ justification})} {gen} {Evaluates to {\tt from {\sl position} - Rect\_({\sl length, angle}) to {\sl position}} from the polar-coordinate data in the arguments } -\macrodef{tr\_xy\_init}{tr_xy_init}{({\sl origin, unit size, sign })} - {cct} - {initialize {\tt tr\_xy}} -\macrodef{tr\_xy}{tr_xy}{({\sl x, y})} - {cct} - {relative macro internal coordinates adjusted for {\tt L|R}} \macrodef{transformer}{transformer}{(\linespec,L|R,{\sl np},% [A|P][W|L][D1|D2|D12|D21],{\sl ns})} {cct} @@ -2536,6 +2592,12 @@ justification})} L = looped windings, D1: phase dots at P1 and S1 end; D2 at P2 and S2 end; D12 at P1 and S2 end; D21 at P2 and S1 end \seesect{Composite:}} +\macrodef{tr\_xy\_init}{tr_xy_init}{({\sl origin, unit size, sign })} + {cct} + {initialize {\tt tr\_xy}} +\macrodef{tr\_xy}{tr_xy}{({\sl x, y})} + {cct} + {relative macro internal coordinates adjusted for {\tt L|R}} \macrodef{tstrip}{tstrip}{(R|L|U|D|{\sl degrees, nterms, chars})} {cct} {terminal strip, chars: @@ -2550,6 +2612,7 @@ brushht})} \macrodef{twopi\_}{twopi_}{} {gen} {$2\pi$} +% \Letter{U}% \macrodef{ujt}{ujt}{(\linespec,R,P,E)} {cct} @@ -2563,6 +2626,7 @@ brushht})} \macrodef{up\_}{up_}{} {gen} {set current direction up \seesect{Placing:}} +% \Letter{V}% \macrodef{variable}{variable}{(`{\sl element}', {\tt [A|P|L|[u]N|[u]NN][C|S]}, [+|-]{\sl angle}, @@ -2616,10 +2680,8 @@ brushht})} {{\tt Vsum\_(A,B)} evaluates to {\tt A+B} with dpic, {\tt A+(B.x,B.y)} with gpic} +% \Letter{W}% -\macrodef{w\_}{w_}{} - {gen} - {.w with respect to current direction} \macrodef{while\_}{while_}{(`{\sl test}',`{\sl actions}')} {gen} {Integer m4 while loop} @@ -2631,6 +2693,9 @@ brushht})} {cct} {core winding drawn in the current direction; {\tt R}=right-handed \seesect{Composite:}} +\macrodef{w\_}{w_}{} + {gen} + {.w with respect to current direction} \macrodef{XOR\_gate}{XOR_gate}{({\sl n},N)} {log} {`xor' gate, 2 or {\sl n\/} inputs; N=negated input. @@ -2640,6 +2705,7 @@ brushht})} \macrodef{XOR\_off}{XOR_off}{} {log} {XOR and NXOR offset of input face} +% \Letter{X}% \macrodef{xtal}{xtal}{(\linespec,{\sl keys})} {cct} diff --git a/Master/texmf-dist/doc/latex/circuit-macros/dpictools.pic b/Master/texmf-dist/doc/latex/circuit-macros/dpictools.pic index c89f13d2939..8d3c81776c1 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/dpictools.pic +++ b/Master/texmf-dist/doc/latex/circuit-macros/dpictools.pic @@ -3,7 +3,7 @@ # m4 macro NeedDpicTools or the pic statement copy "HOMELIB_/dpictools.pic" # when HOMELIB_ is defined or, generically, copy "<path>dpictools.pic" -# Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under # +# Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under # # the LaTeX Project Public Licence in file Licence.txt. The files of # # this distribution may be redistributed or modified provided that this # # copyright notice is included and provided that modifications are clearly # diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/Alogix.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/Alogix.m4 index fd586869b7c..4e5abd837c3 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/Alogix.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/Alogix.m4 @@ -9,7 +9,7 @@ A: Autologix( move left 10bp__ from A.InCk "\sl Out1" at A.Out1 ljust "\sl Out2" at A.Out2 ljust - Loopover_(`v_', `"$v_$" at A.In`'v_ above ', A,B,C,Ck) + foreach_(`v_', `"$v_$" at A.In`'v_ above ', A,B,C,Ck) `"\shortstack[l]{ \tt Autologix( \\ \tt \quad Nand(And(Or(A,C),Or(B,\~{}C),Or(\~{}A,B,C)),Ck);\\ \tt \quad @@ -67,7 +67,7 @@ undefine(`extras') ifdef(`extras',` Q1: Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D))) \ with .nw at A.sw+(0,-61bp__) - Loopover_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) `"\shortstack[l]{% \tt Q1: Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),<options>)\\ @@ -76,37 +76,37 @@ ifdef(`extras',` Q2: Autologix(Nor(Nor(A,And(B,~C)),Nand(Not(B),D)),V) \ with .nw at last "".sw+(0,-14bp__) - Loopover_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) "\sf V" at last [].se above rjust Q3: Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),R) \ with .nw at last [].sw+(0,-0.2) - Loopover_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) "\sf R" at last [].se above rjust Q4: Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),RV) \ with .nw at last [].sw+(0,-0.2) - Loopover_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x above',A,B,C,D) "\sf RV" at last [].se above rjust Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),LRV) \ with .Out at Q4.Out+(3.5,0) - Loopover_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) "\sf LRV" at last [].se above rjust Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),LR;offset=-L_unit*1.5) \ with .Out at Q3.Out+(3.5,0) - Loopover_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) "\sf LR" at last [].se above rjust Autologix(Nor(Nor(A,And(B,~C)),Nand(Not(B),D)),LV;offset=L_unit*2) \ with .Out at Q2.Out+(3.5,0) - Loopover_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) "\sf LV" at last [].se above rjust Autologix(Nor(Nor(A,And(B,C)),Nand(Not(B),D)),L) \ with .Out at Q1.Out+(3.5,0) - Loopover_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) + foreach_(`x',`"\sf x" at last [].In`'x rjust',A,B,C,D) "\sf L" at last [].se above rjust ') diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/Smithchart.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/Smithchart.m4 index fc6b5590db1..8607339a7b0 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/Smithchart.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/Smithchart.m4 @@ -56,7 +56,7 @@ C: circle thick thk rad rar(0) at (0,0) line thick thk grayline(thkg) from C.w to C.e Rc(50): circle thick thk grayline(thkg) rad rar(50) at Rac(50) -Loopover_(`term',`RaArc1(patsubst(term,:,`,'))', +foreach_(`term',`RaArc1(patsubst(term,:,`,'))', 20:thn:50, 30 to 40 by 10:thn:50, 20:thk:20, @@ -86,7 +86,7 @@ Loopover_(`term',`RaArc1(patsubst(term,:,`,'))', 0.01 to 0.191 by 0.01:thn:0.2, 0.05 to 0.151 by 0.1:thk:0.2) -Loopover_(`term',`RaArc2(patsubst(term,:,`,'))', +foreach_(`term',`RaArc2(patsubst(term,:,`,'))', 0.05 to 0.451 by 0.1:thn:1:0.5, 0.02 to 0.181 by 0.02:thn:0.5:0.1) @@ -95,7 +95,7 @@ Xc(50): arct(thk) cw grayline(thkg) from C.e \ Xc(-50): arct(thk) grayline(thkg) from C.e \ to SGamma(0,-50) with .c at Xac(-50) -Loopover_(`term',`XaArc2(patsubst(term,:,`,'))', +foreach_(`term',`XaArc2(patsubst(term,:,`,'))', 10 to 20 by 10:thn:0:50, 7 to 9 by 2:thn:0:10, 2 to 18 by 2:thn:0:20, @@ -112,7 +112,7 @@ Loopover_(`term',`XaArc2(patsubst(term,:,`,'))', 0.2 to 0.81 by 0.2:thk:0:2, 0.1 to 0.91 by 0.2:thk:0:1) -Loopover_(`term',`XaArc2(patsubst(term,:,`,'))', +foreach_(`term',`XaArc2(patsubst(term,:,`,'))', 0.05 to 0.451 by 0.1:thn:0.5:1, 0.02 to 0.181 by 0.02:thn:0:0.5, 0.02 to 0.191 by 0.01:thn:0:0.2, dnl 0.02 should be 0.01 @@ -125,12 +125,12 @@ dnl these avoid TeX arithmetic overflow: dnl Internal labels start here textht = C.wid/120 # Horizontal axis -Loopover_(`t',`box wid textht ht textht*1.5 colored "white" \ +foreach_(`t',`box wid textht ht textht*1.5 colored "white" \ with .se at Rc(t).w+(-2bp__,2bp__) r_text(90,"t",at Rc(t).w+(-textht/3,textht*1.5))', 0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9, 1,1.2,1.4,1.6,1.8, 2,3,4,5,10,20,50) # Xc=1 labels -Loopover_(`tt', +foreach_(`tt', `define(`m4ta',patsubst(tt,:.*))define(`m4vl',patsubst(tt,.*:))dnl X: SGamma(m4vl,1) M: move from Rc(m4vl) to X; ax = lin_ang(M)*rtod_-90 #; print ax @@ -139,7 +139,7 @@ Loopover_(`tt', r_text(-m4ta,m4vl,at X+(Rect_(textht*1.7,-(ax+30)))) ', 10:0.2, 19:0.4, 26:0.6, 32:0.8, 37:1) # right-side circumference -Loopover_(`tt', +foreach_(`tt', `define(`m4ta',patsubst(tt,:.*))define(`m4vl',patsubst(tt,.*:))dnl X: Xc(m4vl).start; ax = atan2(X.y,X.x)*rtod_ ; # print round_(ax) r_text(m4ta,m4vl,at X+(Rect_(textht*2,ax-120))) @@ -148,13 +148,13 @@ Loopover_(`tt', else { r_text(-m4ta,m4vl,at (X.x,-X.y)+(Rect_(textht*2,-ax+150))) } ', 6:20, 11:10, 23:5, 28:4, 37:3, 53:2, 58:1.8, 64:1.6, 71:1.4, 80:1.2, 90:1) # left-side circumference -Loopover_(`tt', +foreach_(`tt', `X: Xc(m4Lx*0.1).start; # print round_(atan2(X.y,X.x)*rtod_-180) r_text(-patsubst(tt,:,`,'),at X+(Rect_(textht*1.7,-m4Lx*11+40))) r_text( patsubst(tt,:,`,'),at (X.x,-X.y)+(Rect_(textht*2.1,m4Lx*11-30))) ', 11:0.1, 23:0.2, 33:0.3, 44:0.4, 53:0.5, 62:0.6, 70:0.7, 77:0.8, 84:0.9) # Ra=1 labels -Loopover_(`tt',`X: SGamma(1,m4Lx*0.2) +foreach_(`tt',`X: SGamma(1,m4Lx*0.2) M: move from Rac(1) to X; # print round_(lin_ang(M)*rtod_-180) r_text(-eval(m4Lx*11),ifelse(m4Lx,5,1,0.eval(m4Lx*2)), at X+(Rect_(textht*1.5,-m4Lx*11+40))) @@ -188,7 +188,7 @@ for_(20,170,10, r_text(eval( 90-m4x),-m4x,at A+(Rect_(A.rad+textht*1.2,-m4x))) ') r_text(90,180,at A-(A.rad+textht/2,0)) -Loopover_(`rca', +foreach_(`rca', `r_text(eval(90-(180-rca/10)),eval(m4Lx*5+5), at A+(Rect_(A.rad-textht*0.7,rca/10))) r_text(eval(-90+(180-rca/10)),eval(-m4Lx*5-5), @@ -199,16 +199,16 @@ Loopover_(`rca', # Internal labels setrgb(thng,thng,thkg) "RESISTANCE R/Zo OR CONDUCTANCE G/Yo" at C+SGamma(0.5,0)-(0,C.rad/40) - Loopover_(`Lttr',`ifelse(Lttr,*,,`r_text(eval(87-m4Lx*86/100),Lttr, + foreach_(`Lttr',`ifelse(Lttr,*,,`r_text(eval(87-m4Lx*86/100),Lttr, at W+(Rect_(W.rad+wltic/2+textht*0.5, 177-m4Lx*0.86))) ')', W,A,V,E,L,E,N,G,T,H,S,*,T,O,W,A,R,D,*,G,E,N,E,R,A,T,O,R) - Loopover_(`Lttr',`ifelse(Lttr,*,,`r_text(eval(115-m4Lx*86/100),Lttr, + foreach_(`Lttr',`ifelse(Lttr,*,,`r_text(eval(115-m4Lx*86/100),Lttr, at W+(Rect_(W.rad-wltic/2-textht*1.0, 204-m4Lx*0.86))) ')', W,A,V,E,L,E,N,G,T,H,S,*,T,O,W,A,R,D,*,L,O,A,D) - Loopover_(`Lttr',`ifelse(Lttr,*,,`define(`xa','13-m4Lx*86/100`) + foreach_(`Lttr',`ifelse(Lttr,*,,`define(`xa','13-m4Lx*86/100`) r_text(eval(xa-90),Lttr,at A+(Rect_(A.rad+textht*0.7, xa))) ')', R,E,F,L,E,C,T,I,O,N,*,C,O,E,F,F,I,C,I,E,N,T,*,A,N,G,L,E) - Loopover_(`Lttr',`ifelse(Lttr,*,,`define(`xa','14-m4Lx*86/100`) + foreach_(`Lttr',`ifelse(Lttr,*,,`define(`xa','14-m4Lx*86/100`) r_text(eval(xa-90),Lttr,at A+(Rect_(A.rad-textht*0.7, xa))) ')', T,R,A,N,S,M,I,S,S,I,O,N,*,C,O,E,F,F,I,C,I,E,N,T,*,A,N,G,L,E) resetrgb diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/Sources.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/Sources.m4 index 8a4bab9bc64..53c732b75d0 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/Sources.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/Sources.m4 @@ -14,6 +14,7 @@ define(`NL',`; move down $1; right_') {source ; move ; "`source'" ljust} NL {source(,I) ; move ; "`source(,I)'" ljust} NL {source(,i) ; move ; "`source(,i)'" ljust} NL + {source(,ii) ; move ; "`source(,ii)'" ljust} NL {source(,V) ; move ; "`source(,V)'" ljust} NL {source(,v) ; move ; "`source(,v)'" ljust} NL {source(,SC) ; move ; "`source(,SC)'" ljust} NL @@ -51,7 +52,8 @@ define(`NL',`; move down $1; right_') {consource(,V) ; move ; "`consource(,V)'" ljust} NL(0.32) {consource(,v) ; move ; "`consource(,v)'" ljust} NL(0.3) {battery ; move ; "`battery'" ljust} NL(0.3) - {battery(,3,R) ; move ; "`battery(,3,R)'" ljust} + {battery(,3,R) ; move ; "`battery(,3,R)'" ljust} NL(0.35) + {ttmotor(,G) ; move ; "`ttmotor(,G)'" ljust} iflatex(`ifpsfrag(,`latexcommand(})')') .PE diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/dpv/SourcesDPV.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/dpv/SourcesDPV.m4 index 91e2edeba64..6c090301831 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/dpv/SourcesDPV.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/dpv/SourcesDPV.m4 @@ -9,6 +9,7 @@ define(`NL',`; move down $1; right_') {source ; move ; "`source'" ljust} NL {source(,I) ; move ; "`source(,I)'" ljust} NL {source(,i) ; move ; "`source(,i)'" ljust} NL + {source(,i) ; move ; "`source(,ii)'" ljust} NL {source(,V) ; move ; "`source(,V)'" ljust} NL {source(,v) ; move ; "`source(,v)'" ljust} NL {source(,AC); move ; "`source(,AC)'" ljust} NL @@ -41,8 +42,9 @@ define(`NL',`; move down $1; right_') {consource(,i) ; move ; "`consource(,i)'" ljust} NL(0.32) {consource(,V) ; move ; "`consource(,V)'" ljust} NL(0.32) {consource(,v) ; move ; "`consource(,v)'" ljust} NL(0.3) - {battery ; move ; "`battery'" ljust} NL - {battery(,3,R) ; move ; "`battery(,3,R)'" ljust} + {battery ; move ; "`battery'" ljust} NL(0.3) + {battery(,3,R) ; move ; "`battery(,3,R)'" ljust} NL(0.35) + {ttmotor(,G) ; move ; "`ttmotor(,G)'" ljust} command "</g>" # end font .PE diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/ex05.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/ex05.m4 index 748a48ebe93..07a5c27fa98 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/ex05.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/ex05.m4 @@ -5,6 +5,7 @@ ifelse(ifpstricks(T)`'ifpgf(T)`'ifsvg(T)`'ifmpost(T),T,` Kalman: [ fillval = 0.8 # environmental variable + linethick = 1 # slightly thicker for better screen pdf dx = boxht/5 # diagram parameters wrt scaled env variables circlerad = boxht*3/8 @@ -96,8 +97,10 @@ Coxeter: [ define(`customarc', `pushdef(`dfillcolor',`0.7,0.7,0.7') linethick_(0.4); dnl - Darc(`$1',linewid, (`$2')*dtor_, (`$3')*dtor_, - thick=linewid/6; wid=linewid*0.3; ht=linewid/6; ends=<->)dnl +# Darc(`$1',linewid, (`$2')*dtor_, (`$3')*dtor_, +# thick=linewid/6; wid=linewid*0.3; ht=linewid/6; ends=<->)dnl + Darc(,centre=`$1';rad=linewid;startdeg= (`$2');enddeg=(`$3'); + thick=linewid/6; wid=linewid*0.3; ht=linewid/6; ends=<->) linethick_(customlinethick); popdef(`dfillcolor')') customarc((linewid,-linewid/3), 25,155) diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/examples.pdf b/Master/texmf-dist/doc/latex/circuit-macros/examples/examples.pdf Binary files differindex 1ca1e0ca2d9..1b001ac9ad4 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/examples.pdf +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/examples.pdf diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Koch.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Koch.m4 index faa46dfff8e..cb122c10b64 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Koch.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Koch.m4 @@ -25,8 +25,9 @@ gen_init line from X to X for i=1 to nsides do { a += rot[i] - X: X+(Rect_(leng,a)) - continue to X +# X: X+(Rect_(leng,a)) +# continue to X + continue by (Rect_(leng,a)) } .PE diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Makefile b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Makefile index 5fba20547c6..efc8a2b23ed 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Makefile +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Makefile @@ -165,7 +165,7 @@ $(DOC).pdf: file=`basename $$fl .m4` ; \ echo $$file.m4 ; \ $(M4) pgf.m4 extras.dim $$file.m4 | $(PIC) -g > $$file.tex ; \ - printf "\n\n|parbox{|textwidth}{\n" | $(BS) >> extras.tex ; \ + printf "\n\n|noindent|parbox{|textwidth}{\n" | $(BS) >> extras.tex ; \ printf "|input{$$file.tex}\n" | $(BS) >> extras.tex ; \ printf "\n $$file.m4\n}\n|vspace{|baselineskip}" \ | sed -e 's/_/|_/g' | $(BS) >> extras.tex ; \ @@ -208,4 +208,4 @@ tst1: dvips $(DVIPSOPTS) tst -o tst.ps clean: - rm -f *.ps *.pdf *.tex *.dim *.pic *.log *.dms *.aux + rm -f *.ps *.pdf *.tex *.dim *.pic *.log *.dms *.aux *.svg diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/README_extras b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/README_extras index 1c18266a6a6..45074a49b2f 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/README_extras +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/README_extras @@ -1,11 +1,11 @@ -THIS DIRECTORY contains a Makefile and m4 sources for diagrams not -included in the examples files. Many of these correspond to questions -asked on stackexchange, of the form "How do I draw ... with tikz?" -Producing drawings like these can be satisfying, as shown by the alacrity -with which knowledgable people assist when questions are asked. Often, -the question has more to do with geometry than drawing language, and -the examples here using m4 with dpic merely confirm that the coding can +THIS DIRECTORY contains a Makefile and m4 sources for some diagrams +not included in the main examples files. Many of these correspond to +questions asked on stackexchange, of the form "How do I draw ... with +tikz?" Producing drawings like these can be satisfying, as shown by the +alacrity with which knowledgable people assist when questions are asked. +The questions often have more to do with geometry than drawing language, +and the examples here using m4 with dpic confirm that the coding can often be done reasonably in several possible languages. This directory is assumed to be a subdirectory of the examples directory diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/TR_fill.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/TR_fill.m4 index bf3fae888c0..9a93dbe5519 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/TR_fill.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/TR_fill.m4 @@ -1,8 +1,8 @@ .PS +gen_init +[ # TR_fill.m4 # https://tex.stackexchange.com/questions/654117/fill-parts-of-a-shape -gen_init - B: (0,0); "B" at B below C: (5,0); "C" at C below A: Cintersect(B,4,C,3); "A" at A above @@ -13,5 +13,42 @@ gen_init arc from A to B rad 2 arc cw to C rad 2.5 arc to A rad 1.5 ) + ] +[ +# Fillbetween +# https://tex.stackexchange.com/questions/688273/polar-curve-shading-error-with-fillbetween +NeedDpicTools + + sc = 0.5 + define coord {(($1,$2)*sc)} + define X1 {coord(Rect_(6*sind($1),$1))} + define X2 {coord(Rect_(2+2*sind($1),$1))} + define interp {$1+($2-($1))*($3)} + define axes { + arrow from coord(-6,0) to coord(6,0) + "$x$" rjust above + for x=-5 to 5 do {line up_ 0.1 at coord(x,0)} + "${-}5$" at coord(-5,-0.05/sc) below + "${}5$" at coord(5,-0.05/sc) below + arrow from coord(0,-2) to coord(0,7) + "$y$" at Here+(8bp__,-10bp__) + for y=-1 to 5 do {line right 0.1 at coord(0,y)} + "${}5$" at coord(-0.05/sc,5) rjust + } + + n = 36 + for i=0 to n do { t = interp(30,150,i/n); C3[i]: X1(t) } + for i=0 to n do { t = interp(150,150-360,i/n); C4[i]: X2(t) } + for i=0 to n do { t = interp(150,210,i/n); C5[i]: X1(t) } + rgbfill(0.9,0.9,0.9, + fitcurve(C3,n) + fitcurve(C4,n) + fitcurve(C5,n) ) + fitcurve(C3,n,outlined "orange" ) + fitcurve(C4,n,outlined "red" ) + fitcurve(C5,n,outlined "orange" ) + + axes + ] with .nw at last [].sw+(0,-0.2) .PE diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Views.m4 b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Views.m4 index c02c9a48172..e33c6566826 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Views.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/extras/Views.m4 @@ -43,9 +43,9 @@ define(`textwidth',5.5) define vec4 { $4[1] = $1; $4[2] = $2; $4[3] = $3; $4[4] = 1 } # copy4( vector, vector ) define copy4 { $2[1] = $1[1]; $2[2] = $1[2]; $2[3] = $1[3]; $2[4] = $1[4] } -# pr4( vector, label ) +# pr4( vector, label ) # projected vector (see pr below) define pr4 { if $1[4]==0 then { print "Divide by zero" } \ - else { $2: pr($1[1]/$1[4],$1[2]/$1[4],$1[3]/$1[4]) }} + else { $2: pr($1[1]/$1[4],$1[2]/$1[4],$1[3]/$1[4]) }} define print4 { print sprintf("%g,%g,%g,%g",$1[1],$1[2],$1[3],$1[4]) } ' diff --git a/Master/texmf-dist/doc/latex/circuit-macros/examples/mf/cct.mf b/Master/texmf-dist/doc/latex/circuit-macros/examples/mf/cct.mf index 776d8f4183e..a511d1f0d9e 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/examples/mf/cct.mf +++ b/Master/texmf-dist/doc/latex/circuit-macros/examples/mf/cct.mf @@ -1,5 +1,5 @@ % cct.mf, generated by Mfpic, v1.10 2012/12/03, -% from TeX source "font" on 2023/05/31 at 20:45 +% from TeX source "font" on 2023/09/11 at 22:43 numeric mfpicversion; mfpicversion := 110; if unknown mode: mode := localfont; fi if unknown mag: mag := 1000/1000; fi diff --git a/Master/texmf-dist/doc/latex/circuit-macros/gpic.m4 b/Master/texmf-dist/doc/latex/circuit-macros/gpic.m4 index 6ac550379da..5752faa7a68 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/gpic.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/gpic.m4 @@ -1,7 +1,7 @@ divert(-1) gpic.m4 Initialization for gpic. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/lib3D.m4 b/Master/texmf-dist/doc/latex/circuit-macros/lib3D.m4 index b5a2f87aafc..7fd9901dd3a 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/lib3D.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/lib3D.m4 @@ -3,7 +3,7 @@ lib3D.m4 Macros for rotation, projection, and other operations on argument triples representing 3D vectors or colors. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/libSLD.m4 b/Master/texmf-dist/doc/latex/circuit-macros/libSLD.m4 index 59729e8f86d..e4438b73aea 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/libSLD.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/libSLD.m4 @@ -2,7 +2,7 @@ divert(-1) libSLD.m4 Draft macros for single-line diagram elements -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/libcct.m4 b/Master/texmf-dist/doc/latex/circuit-macros/libcct.m4 index fd31a76c803..4f8d12c0c2f 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/libcct.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/libcct.m4 @@ -1,7 +1,7 @@ divert(-1) libcct.m4 -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * @@ -617,10 +617,11 @@ define(`xtal',`eleminit_(`$1') pushkey_(`$2',type,N,N) line to rvec_(rp_len,0) invis ') `source( linespec, - V|v|I|i|AC|B|F|G|H|Q|L|N|P|R|S[C[r]|E[r]]]|T|X|U|other, + V|v|I|i|ii|AC|B|F|G|H|Q|L|N|P|R|S[C[r]|E[r]]]|T|X|U|other, diameter, R, attributes,body name) V = voltage source; v = alternate voltage source; I = current source; i = alternate current source; + ii = double arrowhead current source; AC = AC source; B = bulb; F = fluorescent; G = generator; H = step function; L = lamp; N = neon; P = pulse; Q = charge; R = ramp; r = right @@ -651,6 +652,14 @@ define(`source',`ifelse(`$4',R, to rvec_(m4h/2,0)}', `$2',I,`{arrow from rvec_(-m4h*3/4,0) \ to rvec_(m4h*3/4,0)}', + `$2',ii,`{line from rvec_(-m4h,0) \ + to rvec_(m4h,0)} + {line thick 1.2*linethick from rvec_(m4h/12,-m4h*0.45) \ + to rvec_(m4h*5/6,0) \ + then to rvec_(m4h/12,m4h*0.45)} + {line thick 1.2*linethick from rvec_(-m4h*3/4,-m4h*0.45) \ + to Here \ + then to rvec_(-m4h*3/4,m4h*0.45)}', `$2',i,`{line from rvec_(0,-m4h) \ to rvec_(0,m4h)}', `$2',B,`{line from rvec_(-m4h,0) \ diff --git a/Master/texmf-dist/doc/latex/circuit-macros/libgen.m4 b/Master/texmf-dist/doc/latex/circuit-macros/libgen.m4 index 324196e6ecd..d69385b63ae 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/libgen.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/libgen.m4 @@ -2,7 +2,7 @@ divert(-1) libgen.m4 Base macros for dpic and gpic diagrams -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * @@ -199,7 +199,7 @@ define(`latexcommand', `$2')') define(`m4announceprocessor',`dnl Do not change the format of the next line: -`#' `$1' Version 10.3: ifelse(m4picprocessor,gpic,`Gpic', +`#' `$1' Version 10.4: ifelse(m4picprocessor,gpic,`Gpic', m4postprocessor,pstricks,`PSTricks', m4postprocessor,pgf,`TikZ PGF', m4postprocessor,mfpic,`Mfpic', @@ -334,7 +334,7 @@ define(`quadrant_',`(int(pmod(`$1',360)/90)+1)') define(`drawdir_',`define(`m4sectang',`ifelse(`$2',,90,(`$2'))')dnl (int(pmod(`$1'+m4sectang/2,360)/m4sectang)*m4sectang)') - `arcr( position, radius, + `arcr( centre, radius, start radians, end radians, modifiers, ht) Unique ccw arc. If arg 5 contains -> or <- @@ -362,7 +362,7 @@ define(`arcr',`define(`M4arcrC',`M4Pos(ifelse(`$1',,Here,`$1'))')dnl arc patsubst(patsubst(`$5',->,),<-,) \ from M4aStart to M4aEnd rad m4arad with .c at M4aCtr ') - `arcd( position, radius, + `arcd( centre, radius, start degrees, end degrees, attributes, ht) Like arcr but with angles in degrees: @@ -518,8 +518,6 @@ define(`dashline',`rpoint_(`$1')define(`m4opts',`$2') ifelse(`$5',G,, `if m4ti < dashline_n then {')move to rvec_(m4gap,0)ifelse(`$5',G,,}) } ') - - `round(at location,line thickness,attributes) filled circle for rounded corners' define(`round',`{ circle thick ifelse(`$2',,`linethick/2',(`$2')/2) \ diameter ifelse(`$2',,`linethick',`($2)')/2 pt__ \ @@ -1443,32 +1441,73 @@ m4postprocessor,svg, D[iamond] C[rowfoot] P[lain] + R[ight] + L[eft] wdth=expr (default arrowwid) lgth=expr (default arrowht) shaft= attributes (dashed etc) - head= attributes (shaded etc)' -define(`sarrow',`arrow invis `$1' ; M4_E: Here - pushkeys_(`$2',type:O:N;head::N;shaft::N;wdth:arrowwid;lgth:arrowht) - line from last arrow.start to last arrow.end chop 0 chop m4lgth m4shaft - M4_X: Here; M4_P: Vperp(M4_E,M4_X,m4wdth/2) + head= attributes (shaded etc) + name=Name (default Sarrow_)' +define(`sarrow', + `pushkeys_(`$2', + type:O:N;head::N;shaft:m4head:N;wdth:arrowwid;lgth:arrowht;name:Sarrow_:N)dnl + arrow `$1' m4head invis + m4_dx = last arrow.end.x-last arrow.start.x + m4_dy = last arrow.end.y-last arrow.start.y + m4_t = last arrow.thick bp__ +m4name: [ + ifelse(ifelse(m4type,L,L,m4type,R,R),,,`poppushdef(`m4wdth',(m4wdth*2))') + Point: Here; Shaft: Point-(m4_dx,m4_dy) + C: (Shaft-Point)/distance(Shaft,Point) + X: m4affine(m4lgth,0,Point,C) + if m4wdth == 0.0 then { po = 0.0 } \ + else { po = min((m4_t/m4wdth)*sqrt((m4lgth)^2+(m4wdth)^2/4),m4lgth) } + P: m4affine(po,0,Point,C) + h = m4lgth-m4_t/2; + x = h - po; + if m4lgth == 0.0 then { v = 0.0 } else { v = ((m4wdth/2)/m4lgth)*x } + R: m4affine(h, v,Point,C); + L: m4affine(h,-v,Point,C); + if x == 0.0 then { t = 1 } else { t = m4lgth/x } + if m4lgth==0 then { y = 0 } else { y = m4lgth-po+m4_t*m4wdth/m4lgth/4 } + Ly: (P*(x-y)+L*y)/x + Ry: (P*(x-y)+R*y)/x ifinstr(m4type,O, - `line from M4_E to M4_X+(M4_P.x,M4_P.y) then to M4_X-(M4_P.x,M4_P.y) \ - then to M4_E ifelse(m4head,,fill_(1),m4head)', + `line from Shaft to (L+R)/2 m4shaft + line to L then to P then to R then to Here m4head', m4type,D, - `line from M4_X to (0.5 between M4_E and M4_X)+(M4_P.x,M4_P.y) \ - then to M4_E then to (0.5 between M4_E and M4_X)-(M4_P.x,M4_P.y) \ - then to M4_X ifelse(m4head,,fill_(1),m4head)', + `poppushdef(`m4lgth',(m4lgth+m4_t))dnl + s = sqrt(m4lgth^2+m4wdth^2)/2 + if m4wdth==0 then { pd = 0 } else { pd = m4_t*s/m4wdth } + PD: m4affine(pd,0,Point,C) + line from Shaft to X m4shaft + if m4lgth==0 then { pb = 0 } else { pb = m4_t*s/m4lgth } + PL: m4affine(m4lgth/2, m4wdth/2-pb,Point,C) + PR: m4affine(m4lgth/2,-m4wdth/2+pb,Point,C) + line to PL then to PD then to PR then to X \ + ifelse(m4head,,fill_(1),m4head)', m4type,P, - `line to M4_E m4head - line from M4_X+(M4_P.x,M4_P.y) to M4_E then to M4_X-(M4_P.x,M4_P.y) m4head', + `line from Shaft to P m4shaft + line from Ly to P then to Ry m4head', m4type,C, - `line to M4_E m4head - ifdpic(`spline 0.4 from M4_E+M4_P to M4_X+M4_P then to M4_X-M4_P \ - then to M4_E-M4_P', - `spline from M4_E+(M4_P.x,M4_P.y) to M4_X+(M4_P.x,M4_P.y) \ - then to M4_X-(M4_P.x,M4_P.y) then to M4_E-(M4_P.x,M4_P.y)') m4head') - popdef(`m4type',`m4head',`m4shaft',`m4wdth',`m4lgth')dnl - move to M4_E') + `line from Shaft to Point m4head + Q: (-C.y,C.x)*((m4wdth-m4_t)/2) + Y: m4affine(m4lgth-m4_t/2,0,Point,C) + ifdpic(`spline 0.4 from Point+Q to Y+Q then to Y-Q then to Point-Q', + `spline from Point+(Q.x,Q.y) to Y+(Q.x,Q.y) \ + then to Y-(Q.x,Q.y) then to Point-(Q.x,Q.y)') m4head', + m4type,R, + `line from Shaft to P m4shaft + circle diam m4_t/2 at Here m4shaft thick last line.thick/2 + line from 1bp__/distance(Ly,P) between P and Ly to P then to Ry m4shaft', + m4type,L, + `line from Shaft to P m4shaft + circle diam m4_t/2 at Here m4shaft thick last line.thick/2 + line from 1bp__/distance(Ry,P) between P and Ry to P then to Ly m4shaft') + popdef(`m4type',`m4head',`m4shaft',`m4wdth',`m4lgth',`m4name')dnl + ] with .Point at Here') +define(`m4affine', + ``$3' + (`$4'.x*(`$1')-`$4'.y*(`$2'),`$4'.y*(`$1')+`$4'.x*(`$2'))') `open_arrow(linespec, ht, wid, head attribs) arrow with outlined head, like sarrow(,type=O)' @@ -1828,7 +1867,7 @@ define(`graystring',`rgbstring(`$1',`$1',`$1')') `outlined string' or `shaded string' (mpost,PSTricks,pdf,tikz-pgf,postscript,svg only) - The 1: after rgb is a divisor for the values + The "1:" after rgb is a divisor for the values (xcolor manual p 16)' ifelse( m4postprocessor,pstricks,`define(`rgbstring',`ifelse(`$2',,`"$1"', diff --git a/Master/texmf-dist/doc/latex/circuit-macros/liblog.m4 b/Master/texmf-dist/doc/latex/circuit-macros/liblog.m4 index 67b9a78773d..5f4693cd673 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/liblog.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/liblog.m4 @@ -1,7 +1,7 @@ divert(-1) liblog.m4 Logic gates -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/mfpic.m4 b/Master/texmf-dist/doc/latex/circuit-macros/mfpic.m4 index d82cb5ffcea..6fde5de5284 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/mfpic.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/mfpic.m4 @@ -1,7 +1,7 @@ divert(-1) mfpic.m4 Initialization for mfpic. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/mpost.m4 b/Master/texmf-dist/doc/latex/circuit-macros/mpost.m4 index 9cc15dc8979..21fb7c01c9c 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/mpost.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/mpost.m4 @@ -1,7 +1,7 @@ divert(-1) mpost.m4 Initialization for metapost. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/pdf.m4 b/Master/texmf-dist/doc/latex/circuit-macros/pdf.m4 index 30c88f407d4..685dc5e93d1 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/pdf.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/pdf.m4 @@ -1,7 +1,7 @@ divert(-1) pdf.m4 Initialization for pdf output. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/pgf.m4 b/Master/texmf-dist/doc/latex/circuit-macros/pgf.m4 index 72f109832ff..2bdbef15500 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/pgf.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/pgf.m4 @@ -1,7 +1,7 @@ divert(-1) pgf.m4 Initialization for Tikz-pgf. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/postscript.m4 b/Master/texmf-dist/doc/latex/circuit-macros/postscript.m4 index da7e16ba341..42d546fb0c7 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/postscript.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/postscript.m4 @@ -1,7 +1,7 @@ divert(-1) postscript.m4 Initialization for Postscript output. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/psfrag.m4 b/Master/texmf-dist/doc/latex/circuit-macros/psfrag.m4 index 172ed5ce6dd..e05909a3275 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/psfrag.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/psfrag.m4 @@ -2,7 +2,7 @@ divert(-1) psfrag.m4 Initialization for dpic -f processing: Postscript with psfrag strings -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/pstricks.m4 b/Master/texmf-dist/doc/latex/circuit-macros/pstricks.m4 index f172c6cde3c..1da2497e567 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/pstricks.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/pstricks.m4 @@ -1,7 +1,7 @@ divert(-1) pstricks.m4 Initialization for PSTricks. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/svg.m4 b/Master/texmf-dist/doc/latex/circuit-macros/svg.m4 index f08764fd131..f545debb233 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/svg.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/svg.m4 @@ -1,7 +1,7 @@ divert(-1) svg.m4 Initialization for svg output. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * diff --git a/Master/texmf-dist/doc/latex/circuit-macros/xfig.m4 b/Master/texmf-dist/doc/latex/circuit-macros/xfig.m4 index 40a94e454c4..8a00a9368ee 100644 --- a/Master/texmf-dist/doc/latex/circuit-macros/xfig.m4 +++ b/Master/texmf-dist/doc/latex/circuit-macros/xfig.m4 @@ -1,7 +1,7 @@ divert(-1) xfig.m4 Initialization for xfig. -* Circuit_macros Version 10.3, copyright (c) 2023 J. D. Aplevich under * +* Circuit_macros Version 10.4, copyright (c) 2023 J. D. Aplevich under * * the LaTeX Project Public Licence in file Licence.txt. The files of * * this distribution may be redistributed or modified provided that this * * copyright notice is included and provided that modifications are clearly * |