diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex')
-rw-r--r-- | Master/texmf-dist/doc/latex/pgfmorepages/README | 14 | ||||
-rw-r--r-- | Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.pdf | bin | 0 -> 61834 bytes | |||
-rw-r--r-- | Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.tex | 390 |
3 files changed, 404 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/pgfmorepages/README b/Master/texmf-dist/doc/latex/pgfmorepages/README new file mode 100644 index 00000000000..a11c2db77bd --- /dev/null +++ b/Master/texmf-dist/doc/latex/pgfmorepages/README @@ -0,0 +1,14 @@ +---------------------------------------------------------------- +pgfmorepages --- LaTeX functions for manipulating multiple pages +E-mail: loopspace@mathforge.org +Released jointly under the LaTeX Project Public License v1.3c (or +later) and under the GNU Public License. + +See http://www.latex-project.org/lppl.txt +and https://www.gnu.org/licenses/gpl.html +---------------------------------------------------------------- + +This package replaces and extends the pgfpages sub-package of the PGF +system. It provides the capability to arrange multiple "logical" +pages on multiple "physical" pages, for example as for arranging pages +to make booklets. diff --git a/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.pdf b/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.pdf Binary files differnew file mode 100644 index 00000000000..5c275b419f4 --- /dev/null +++ b/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.pdf diff --git a/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.tex b/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.tex new file mode 100644 index 00000000000..0eb4b69dc59 --- /dev/null +++ b/Master/texmf-dist/doc/latex/pgfmorepages/pgfmorepages.tex @@ -0,0 +1,390 @@ +\documentclass{ltxdoc} + +\usepackage{tikz} +\usetikzlibrary{positioning} +\usepackage{pgfmorepages} +\usepackage{fancyvrb} + +\GetFileInfo{pgfmorepages.sty} + +\title{PGF \emph{more} Pages} +\author{Andrew Stacey \\ \texttt{loopspace@mathforge.org}} +\date{\fileversion\ from \filedate} + +\begin{document} + +\maketitle + +\section{Introduction} + +The \Verb+pgfmorepages+ package is a drop-in replacement for the \Verb+pgfpages+ package which comes with TikZ/PGF. +As it is a drop-in replacement, it \emph{ought} to be fully backwards compatible with \Verb+pgfpages+. + +\Verb+pgfpages+ allows you the ability to place several pages of your document (hereafter \emph{logical pages}) onto one page of the output (hereafter \emph{physical pages}). +\Verb+pgfmorepages+ adds extra features, the primary one being that whereas \Verb+pgfpages+ is ``many to one'', \Verb+pgfmorepages+ is ``many to many''. +That is, while \Verb+pgfpages+ works one physical page at a time then \Verb+pgfmorepages+ can juggle several logical pages onto several physical pages. + +As an example of its capability, the layout \Verb+4 on 2, book format+ places four logical pages onto two physical pages so that when folded it forms a booklet. +The layout is therefore: + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(4\)}; +\node at (1,0) {\(1\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(3\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +This requires knowing all four logical pages before the first physical page is output. + +\section{Usage} + +In your preamble: + +\begin{verbatim} +\usepackage{pgfmorepages} +\end{verbatim} + +\subsection{Layouts} + +The original \Verb+pgfpages+ defined the following layouts: + +\begin{itemize} +\item \Verb+rounded corners+ +\item \Verb+resize to+ +\item \Verb+two screens with lagging second+ +\item \Verb+two screens with optional second+ +\item \Verb+2 on 1+ +\item \Verb+4 on 1+ +\item \Verb+6 on 1+ +\item \Verb+8 on 1+ +\item \Verb+16 on 1+ +\end{itemize} + +The \Verb+pgfmorepages+ defines some extra layouts, which require the following command in your preamble: +% +\begin{verbatim} +\pgfmorepagesloadextralayouts +\end{verbatim} + +\begin{itemize} +\item \Verb+4 on 2, odd then even+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(1\)}; +\node at (1,0) {\(3\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(4\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +\item \Verb+4 on 2, even then odd+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(2\)}; +\node at (1,0) {\(4\)}; +\node at (3,0) {\(1\)}; +\node at (4,0) {\(3\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +\item \Verb+4 on 2, book format+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(4\)}; +\node at (1,0) {\(1\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(3\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +\item \Verb+8 on 4, book format+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(8\)}; +\node at (1,0) {\(1\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(7\)}; +\node at (6,0) {\(6\)}; +\node at (7,0) {\(3\)}; +\node at (9,0) {\(4\)}; +\node at (10,0) {\(5\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (6,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (7,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (9,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (10,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +\item \Verb+8 on 4, book format, reverse second, single sided+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(8\)}; +\node at (1,0) {\(1\)}; +\node at (3,0) {\(6\)}; +\node at (4,0) {\(3\)}; +\node[rotate=180] at (6,0) {\(5\)}; +\node[rotate=180] at (7,0) {\(4\)}; +\node[rotate=180] at (9,0) {\(7\)}; +\node[rotate=180] at (10,0) {\(2\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (6,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (7,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (9,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (10,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + + +\item \Verb+5 index cards+ +\item \Verb+repeated 2-up+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(1\)}; +\node at (1,0) {\(1\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(2\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + +\item \Verb+repeated 4-up+ + +\begin{center} +\begin{tikzpicture} +\node at (0,0) {\(1\)}; +\node at (1,0) {\(1\)}; +\node at (0,1.4) {\(1\)}; +\node at (1,1.4) {\(1\)}; +\node at (3,0) {\(2\)}; +\node at (4,0) {\(2\)}; +\node at (3,1.4) {\(2\)}; +\node at (4,1.4) {\(2\)}; +\draw (-.5,-.7) rectangle (.5,.7); +\draw (1,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,0) +(-.5,-.7) rectangle +(.5,.7); +\draw (0,1.4) +(-.5,-.7) rectangle +(.5,.7); +\draw (1,1.4) +(-.5,-.7) rectangle +(.5,.7); +\draw (3,1.4) +(-.5,-.7) rectangle +(.5,.7); +\draw (4,1.4) +(-.5,-.7) rectangle +(.5,.7); +\end{tikzpicture} +\end{center} + + +\item \Verb+1 on 1+ + +This is a layout that ``resets'' the mechanism back to one logical page on one physical page. +It still uses the mechanics of the \Verb+pgfmorepages+ package so is not quite the same as removing it altogether, but is effectively the same. + +\item \Verb+discard+ + +This layout discards all its pages. +Useful to remove pages from a document without changing the source file too much. + +\end{itemize} + +To use a layout, use the command: +% +\begin{verbatim} +\pgfpagesuselayout{<layout name>}[<optional arguments>] +\end{verbatim} + + + +\subsection{Options} + +The optional arguments are a superset of the ones that \Verb+pgfpages+ allows. + +\begin{itemize} +\item \Verb+physical paper width+ +\item \Verb+physical paper height+ +\item \Verb+a0paper+ +\item \Verb+a1paper+ +\item \Verb+a2paper+ +\item \Verb+a3paper+ +\item \Verb+a4paper+ +\item \Verb+a5paper+ +\item \Verb+a6paper+ +\item \Verb+letterpaper+ +\item \Verb+legalpaper+ +\item \Verb+executivepaper+ +\item \Verb+landscape+ +\item \Verb+border shrink+ +\item \Verb+border code+ +\item \Verb+corner width+ +\item \Verb+odd numbered pages right+ +\item \Verb+second right+ +\item \Verb+second left+ +\item \Verb+second top+ +\item \Verb+second bottom+ +\end{itemize} + +The only additional option is \Verb+border code+ which, if the layout does anything with it, is designed for passing a command to the layout for the border path. +The intention of this is that sometimes it is useful to draw the page border when designing a document but you might want to disable it for the final version. +This makes it easy to switch between those (providing the layout supports it). + +\subsection{Changing Layout} + +The documentation for \Verb+pgfpages+ states that it is possible to change layout mid-document. +This turns out not to be correct for \Verb+pgfpages+ as it doesn't reset everything correctly. +\Verb+pgfmorepages+ fixes this\footnote{Or tries to -- I keep discovering new options that I haven't reset properly.}. +It is best practice to use a \Verb+\newpage+ or \Verb+\clearpage+ before doing so. +The layout \Verb+1 on 1+ is useful here as it sets the layout back to one logical page on one physical page. + +\section{Defining a New Layout} + +The best way to define a new layout is to start with one of the predefined ones and modify it. +To that end, here is an example layout with comments. + +\begin{verbatim} + % Set the name of the layout +\pgfpagesdeclarelayout{4 on 2, book format}% +{% + % Unless overridden, this layout uses the same paper size + % but rotated so that two logical pages fit naturally on + % one physical page + \edef\pgfpageoptionheight{\the\paperwidth} + \edef\pgfpageoptionwidth{\the\paperheight} + % Defaults for the border + \def\pgfpageoptionborder{0pt} + \def\pgfpageoptionbordercode{} + % Start with the first page of the document + \def\pgfpageoptionfirstshipout{1} +}% +{% + % These are the settings for the physical pages + \pgfpagesphysicalpageoptions + {% + % Each set consists of 4 logical and 2 physical pages + logical pages=4,% + physical pages=2,% + physical height=\pgfpageoptionheight,% + physical width=\pgfpageoptionwidth,% + current logical shipout=\pgfpageoptionfirstshipout% + } + % These are the settings for the logical pages. + % These hold for all the logical pages. + \pgfpagessetdefaults{% + border code=\pgfpageoptionbordercode + } + % Our arrangement is different for two portrait pages + % on one landscape as opposed to two landscape on + % one portrait. + % This is for two portrait on one landscape + \ifdim\paperheight>\paperwidth\relax + % put side-by-side + % There are several ways to declare which logical page + % goes on which physical page. This command sets the + % physical page for the following logical pages. The + % second argument is any options to be set for that + % physical page. + \pgfpagesphysicalpage{1}{} + % Our fourth logical page goes on the first physical page + \pgfpageslogicalpageoptions{4} + {% + border shrink=\pgfpageoptionborder,% + resized width=.5\pgfphysicalwidth,% + resized height=\pgfphysicalheight,% + center=\pgfpoint{.25\pgfphysicalwidth}{.5\pgfphysicalheight}% + }% + % The second and third logical pages go on the second + % physical page. + \pgfpagesphysicalpage{2}{} + \pgfpageslogicalpageoptions{3} + {% + border shrink=\pgfpageoptionborder,% + resized width=.5\pgfphysicalwidth,% + resized height=\pgfphysicalheight,% + center=\pgfpoint{.75\pgfphysicalwidth}{.5\pgfphysicalheight}% + }% + \pgfpageslogicalpageoptions{2} + {% + border shrink=\pgfpageoptionborder,% + resized width=.5\pgfphysicalwidth,% + resized height=\pgfphysicalheight,% + center=\pgfpoint{.25\pgfphysicalwidth}{.5\pgfphysicalheight}% + }% + % The first logical page goes back on the first physical page. + \pgfpagesphysicalpage{1}{} + \pgfpageslogicalpageoptions{1} + {% + border shrink=\pgfpageoptionborder,% + resized width=.5\pgfphysicalwidth,% + resized height=\pgfphysicalheight,% + center=\pgfpoint{.75\pgfphysicalwidth}{.5\pgfphysicalheight}% + }% + \else + % These are essentially the same as above, except with + % two landscape pages on one portrait, so the pages + % are in different locations. + % stack on top of one another + \pgfpagesphysicalpage{1}{} + \pgfpageslogicalpageoptions{4} + {% + border shrink=\pgfpageoptionborder,% + resized width=\pgfphysicalwidth,% + resized height=.5\pgfphysicalheight,% + center=\pgfpoint{.5\pgfphysicalwidth}{.75\pgfphysicalheight}% + }% + \pgfpagesphysicalpage{2}{} + \pgfpageslogicalpageoptions{3} + {% + border shrink=\pgfpageoptionborder,% + resized width=\pgfphysicalwidth,% + resized height=.5\pgfphysicalheight,% + center=\pgfpoint{.5\pgfphysicalwidth}{.25\pgfphysicalheight}% + }% + \pgfpageslogicalpageoptions{2} + {% + border shrink=\pgfpageoptionborder,% + resized width=\pgfphysicalwidth,% + resized height=.5\pgfphysicalheight,% + center=\pgfpoint{.5\pgfphysicalwidth}{.75\pgfphysicalheight}% + }% + \pgfpagesphysicalpage{2}{} + \pgfpageslogicalpageoptions{1} + {% + border shrink=\pgfpageoptionborder,% + resized width=\pgfphysicalwidth,% + resized height=.5\pgfphysicalheight,% + center=\pgfpoint{.5\pgfphysicalwidth}{.25\pgfphysicalheight}% + }% + \fi +} +\end{verbatim} + +\end{document} |