diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex')
13 files changed, 1103 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/LICENSE b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/LICENSE new file mode 100644 index 00000000000..ce89b50e2ec --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/LICENSE @@ -0,0 +1,146 @@ + +Location: CTAN License The LaTeX Project Public License 1.3c +https://www.ctan.org/license/lppl1.3c +The LaTeX Project Public License + +LPPL Version 1.3c 2008-05-04 + +Copyright 1999 2002-2008 LaTeX3 Project + +Everyone is allowed to distribute verbatim copies of this license document, but modification of it is not allowed. +PREAMBLE + +The LaTeX Project Public License (LPPL) is the primary license under which the LaTeX kernel and the base LaTeX packages are distributed. + +You may use this license for any work of which you hold the copyright and which you wish to distribute. This license may be particularly suitable if your work is TeX-related (such as a LaTeX package), but it is written in such a way that you can use it even if your work is unrelated to TeX. + +The section “WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE”, below, gives instructions, examples, and recommendations for authors who are considering distributing their works under this license. + +This license gives conditions under which a work may be distributed and modified, as well as conditions under which modified versions of that work may be distributed. + +We, the LaTeX3 Project, believe that the conditions below give you the freedom to make and distribute modified versions of your work that conform with whatever technical specifications you wish while maintaining the availability, integrity, and reliability of that work. If you do not see how to achieve your goal while meeting these conditions, then read the document “cfgguide.tex” and “modguide.tex” in the base LaTeX distribution for suggestions. +DEFINITIONS + +In this license document the following terms are used: + +“Work” + Any work being distributed under this License. +“Derived Work” + Any work that under any applicable law is derived from the Work. +“Modification” + Any procedure that produces a Derived Work under any applicable law – for example, the production of a file containing an original file associated with the Work or a significant portion of such a file, either verbatim or with modifications and/or translated into another language. +“Modify” + To apply any procedure that produces a Derived Work under any applicable law. +“Distribution” + Making copies of the Work available from one person to another, in whole or in part. Distribution includes (but is not limited to) making any electronic components of the Work accessible by file transfer protocols such as FTP or HTTP or by shared file systems such as Sun's Network File System (NFS). +“Compiled Work” + A version of the Work that has been processed into a form where it is directly usable on a computer system. This processing may include using installation facilities provided by the Work, transformations of the Work, copying of components of the Work, or other activities. Note that modification of any installation facilities provided by the Work constitutes modification of the Work. +“Current Maintainer” + A person or persons nominated as such within the Work. If there is no such explicit nomination then it is the “Copyright Holder” under any applicable law. +“Base Interpreter” + A program or process that is normally needed for running or interpreting a part or the whole of the Work. + + A Base Interpreter may depend on external components but these are not considered part of the Base Interpreter provided that each external component clearly identifies itself whenever it is used interactively. Unless explicitly specified when applying the license to the Work, the only applicable Base Interpreter is a “LaTeX-Format” or in the case of files belonging to the “LaTeX-format” a program implementing the “TeX language”. + +CONDITIONS ON DISTRIBUTION AND MODIFICATION + + Activities other than distribution and/or modification of the Work are not covered by this license; they are outside its scope. In particular, the act of running the Work is not restricted and no requirements are made concerning any offers of support for the Work. + You may distribute a complete, unmodified copy of the Work as you received it. Distribution of only part of the Work is considered modification of the Work, and no right to distribute such a Derived Work may be assumed under the terms of this clause. + You may distribute a Compiled Work that has been generated from a complete, unmodified copy of the Work as distributed under Clause 2 above, as long as that Compiled Work is distributed in such a way that the recipients may install the Compiled Work on their system exactly as it would have been installed if they generated a Compiled Work directly from the Work. + If you are the Current Maintainer of the Work, you may, without restriction, modify the Work, thus creating a Derived Work. You may also distribute the Derived Work without restriction, including Compiled Works generated from the Derived Work. Derived Works distributed in this manner by the Current Maintainer are considered to be updated versions of the Work. + If you are not the Current Maintainer of the Work, you may modify your copy of the Work, thus creating a Derived Work based on the Work, and compile this Derived Work, thus creating a Compiled Work based on the Derived Work. + If you are not the Current Maintainer of the Work, you may distribute a Derived Work provided the following conditions are met for every component of the Work unless that component clearly states in the copyright notice that it is exempt from that condition. Only the Current Maintainer is allowed to add such statements of exemption to a component of the Work. + If a component of this Derived Work can be a direct replacement for a component of the Work when that component is used with the Base Interpreter, then, wherever this component of the Work identifies itself to the user when used interactively with that Base Interpreter, the replacement component of this Derived Work clearly and unambiguously identifies itself as a modified version of this component to the user when used interactively with that Base Interpreter. + Every component of the Derived Work contains prominent notices detailing the nature of the changes to that component, or a prominent reference to another file that is distributed as part of the Derived Work and that contains a complete and accurate log of the changes. + No information in the Derived Work implies that any persons, including (but not limited to) the authors of the original version of the Work, provide any support, including (but not limited to) the reporting and handling of errors, to recipients of the Derived Work unless those persons have stated explicitly that they do provide such support for the Derived Work. + You distribute at least one of the following with the Derived Work: + A complete, unmodified copy of the Work; if your distribution of a modified component is made by offering access to copy the modified component from a designated place, then offering equivalent access to copy the Work from the same or some similar place meets this condition, even though third parties are not compelled to copy the Work along with the modified component; + Information that is sufficient to obtain a complete, unmodified copy of the Work. + If you are not the Current Maintainer of the Work, you may distribute a Compiled Work generated from a Derived Work, as long as the Derived Work is distributed to all recipients of the Compiled Work, and as long as the conditions of Clause 6, above, are met with regard to the Derived Work. + The conditions above are not intended to prohibit, and hence do not apply to, the modification, by any method, of any component so that it becomes identical to an updated version of that component of the Work as it is distributed by the Current Maintainer under Clause 4, above. + Distribution of the Work or any Derived Work in an alternative format, where the Work or that Derived Work (in whole or in part) is then produced by applying some process to that format, does not relax or nullify any sections of this license as they pertain to the results of applying that process. + A Derived Work may be distributed under a different license provided that license itself honors the conditions listed in Clause 6 above, in regard to the Work, though it does not have to honor the rest of the conditions in this license. + If a Derived Work is distributed under a different license, that Derived Work must provide sufficient documentation as part of itself to allow each recipient of that Derived Work to honor the restrictions in Clause 6 above, concerning changes from the Work. + This license places no restrictions on works that are unrelated to the Work, nor does this license place any restrictions on aggregating such works with the Work by any means. + Nothing in this license is intended to, or may be used to, prevent complete compliance by all parties with all applicable laws. + +NO WARRANTY + +There is no warranty for the Work. Except when otherwise stated in writing, the Copyright Holder provides the Work “as is”, without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the Work is with you. Should the Work prove defective, you assume the cost of all necessary servicing, repair, or correction. + +In no event unless required by applicable law or agreed to in writing will The Copyright Holder, or any author named in the components of the Work, or any other party who may distribute and/or modify the Work as permitted above, be liable to you for damages, including any general, special, incidental or consequential damages arising out of any use of the Work or out of inability to use the Work (including, but not limited to, loss of data, data being rendered inaccurate, or losses sustained by anyone as a result of any failure of the Work to operate with any other programs), even if the Copyright Holder or said author or said other party has been advised of the possibility of such damages. +MAINTENANCE OF THE WORK + +The Work has the status “author-maintained” if the Copyright Holder explicitly and prominently states near the primary copyright notice in the Work that the Work can only be maintained by the Copyright Holder or simply that it is “author-maintained”. + +The Work has the status “maintained” if there is a Current Maintainer who has indicated in the Work that they are willing to receive error reports for the Work (for example, by supplying a valid e-mail address). It is not required for the Current Maintainer to acknowledge or act upon these error reports. + +The Work changes from status “maintained” to “unmaintained” if there is no Current Maintainer, or the person stated to be Current Maintainer of the work cannot be reached through the indicated means of communication for a period of six months, and there are no other significant signs of active maintenance. + +You can become the Current Maintainer of the Work by agreement with any existing Current Maintainer to take over this role. + +If the Work is unmaintained, you can become the Current Maintainer of the Work through the following steps: + + Make a reasonable attempt to trace the Current Maintainer (and the Copyright Holder, if the two differ) through the means of an Internet or similar search. + If this search is successful, then enquire whether the Work is still maintained. + If it is being maintained, then ask the Current Maintainer to update their communication data within one month. + If the search is unsuccessful or no action to resume active maintenance is taken by the Current Maintainer, then announce within the pertinent community your intention to take over maintenance. (If the Work is a LaTeX work, this could be done, for example, by posting to comp.text.tex.) + If the Current Maintainer is reachable and agrees to pass maintenance of the Work to you, then this takes effect immediately upon announcement. + If the Current Maintainer is not reachable and the Copyright Holder agrees that maintenance of the Work be passed to you, then this takes effect immediately upon announcement. + If you make an “intention announcement” as described in 2b. above and after three months your intention is challenged neither by the Current Maintainer nor by the Copyright Holder nor by other people, then you may arrange for the Work to be changed so as to name you as the (new) Current Maintainer. + If the previously unreachable Current Maintainer becomes reachable once more within three months of a change completed under the terms of 3b) or 4), then that Current Maintainer must become or remain the Current Maintainer upon request provided they then update their communication data within one month. + +A change in the Current Maintainer does not, of itself, alter the fact that the Work is distributed under the LPPL license. + +If you become the Current Maintainer of the Work, you should immediately provide, within the Work, a prominent and unambiguous statement of your status as Current Maintainer. You should also announce your new status to the same pertinent community as in 2b) above. +WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE + +This section contains important instructions, examples, and recommendations for authors who are considering distributing their works under this license. These authors are addressed as “you” in this section. +Choosing This License or Another License + +If for any part of your work you want or need to use *distribution* conditions that differ significantly from those in this license, then do not refer to this license anywhere in your work but, instead, distribute your work under a different license. You may use the text of this license as a model for your own license, but your license should not refer to the LPPL or otherwise give the impression that your work is distributed under the LPPL. + +The document “modguide.tex” in the base LaTeX distribution explains the motivation behind the conditions of this license. It explains, for example, why distributing LaTeX under the GNU General Public License (GPL) was considered inappropriate. Even if your work is unrelated to LaTeX, the discussion in “modguide.tex” may still be relevant, and authors intending to distribute their works under any license are encouraged to read it. +A Recommendation on Modification Without Distribution + +It is wise never to modify a component of the Work, even for your own personal use, without also meeting the above conditions for distributing the modified component. While you might intend that such modifications will never be distributed, often this will happen by accident – you may forget that you have modified that component; or it may not occur to you when allowing others to access the modified version that you are thus distributing it and violating the conditions of this license in ways that could have legal implications and, worse, cause problems for the community. It is therefore usually in your best interest to keep your copy of the Work identical with the public one. Many works provide ways to control the behavior of that work without altering any of its licensed components. +How to Use This License + +To use this license, place in each of the components of your work both an explicit copyright notice including your name and the year the work was authored and/or last substantially modified. Include also a statement that the distribution and/or modification of that component is constrained by the conditions in this license. + +Here is an example of such a notice and statement: + + %% pig.dtx + %% Copyright 2005 M. Y. Name + % + % This work may be distributed and/or modified under the + % conditions of the LaTeX Project Public License, either version 1.3 + % of this license or (at your option) any later version. + % The latest version of this license is in + % http://www.latex-project.org/lppl.txt + % and version 1.3 or later is part of all distributions of LaTeX + % version 2005/12/01 or later. + % + % This work has the LPPL maintenance status “maintained”. + % + % The Current Maintainer of this work is M. Y. Name. + % + % This work consists of the files pig.dtx and pig.ins + % and the derived file pig.sty. + +Given such a notice and statement in a file, the conditions given in this license document would apply, with the “Work” referring to the three files “pig.dtx”, “pig.ins”, and “pig.sty” (the last being generated from “pig.dtx” using “pig.ins”), the “Base Interpreter” referring to any “LaTeX-Format”, and both “Copyright Holder” and “Current Maintainer” referring to the person “M. Y. Name”. + +If you do not want the Maintenance section of LPPL to apply to your Work, change “maintained” above into “author-maintained”. However, we recommend that you use “maintained”, as the Maintenance section was added in order to ensure that your Work remains useful to the community even when you can no longer maintain and support it yourself. +Derived Works That Are Not Replacements + +Several clauses of the LPPL specify means to provide reliability and stability for the user community. They therefore concern themselves with the case that a Derived Work is intended to be used as a (compatible or incompatible) replacement of the original Work. If this is not the case (e.g., if a few lines of code are reused for a completely different task), then clauses 6b and 6d shall not apply. +Important Recommendations + +Defining What Constitutes the Work + The LPPL requires that distributions of the Work contain all the files of the Work. It is therefore important that you provide a way for the licensee to determine which files constitute the Work. This could, for example, be achieved by explicitly listing all the files of the Work near the copyright notice of each file or by using a line such as: + + % This work consists of all files listed in manifest.txt. + + in that place. In the absence of an unequivocal list it might be impossible for the licensee to determine what is considered by you to comprise the Work and, in such a case, the licensee would be entitled to make reasonable conjectures as to which files comprise the Work. + + diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/README.md b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/README.md new file mode 100644 index 00000000000..085bd4104de --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/README.md @@ -0,0 +1,36 @@ +# Templates of Belgian invoices for non-profit organisations. +*V. 0.1, 2018/11/14* + +The modeles-factures-belges-associations extension is used to generate invoices for Belgian non-profit organisations. + +## Crédits + +- Author : Robert Sebille, Rudy Cassart +- Maintainer: Robert Sebille, Rudy Cassart + +- Licence : Released under the LaTeX Project Public License v1.3c or later, see http://www.latex-project.org/lppl.txt +- % Depends of calctab, fancyhdr, ifthen, eurosym, hyperref, multirow, color, colortbl + +# Modèles de factures belges pour les associations +*V. 0.1, 2018/11/14* + +Cette extension XeLaTeX permet aux associations de générer des factures au modèle belge. + +##Déni de toute responsabilité: +personnellement, nous nous servons de ces factures et nous n'avons rencontré aucun problème à ce jour; mais nous ne ne sommes ni comptable, ni fiscaliste, et nous ne pouvons garantir que tout soit officiellement en ordre, nous partageons, c'est tout. + +C'est votre responsabilité de vérifier. Si vous avez des remarques ou des suggestions pertinentes à ce propos, vous pouvez nous les faire parvenir à partir du [bug tracker de la forge](https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/issues). + +## Crédits + +- Author : Robert Sebille, Rudy Cassart +- Maintainer: Robert Sebille, Rudy Cassart +- Licence : Released under the LaTeX Project Public License v1.3c or later, see http://www.latex-project.org/lppl.txt +- % Depend de calctab, fancyhdr, ifthen, eurosym, hyperref, multirow, color, colortbl + +## Website +- [home](https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/home) +- [Annonces](https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/wikis/Annonces) +- [Change log](https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/wikis/Change-log) + + diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.pdf b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.pdf Binary files differnew file mode 100644 index 00000000000..330821ac4e6 --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.pdf diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.tex new file mode 100644 index 00000000000..759520d0b0f --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/documentation/modeles-factures-belges-associations-doc.tex @@ -0,0 +1,495 @@ +\documentclass[a4paper,10pt]{article} +%\usepackage[utf8x]{inputenc} +\usepackage{fontspec} +%\usepackage[T1]{fontenc} +\usepackage[french]{babel} + +%\usepackage{layout} +%\usepackage{geometry} +%\usepackage{setspace} +\usepackage{soul} +\usepackage{ulem} +\usepackage{eurosym} +%\usepackage{bookman} +%\usepackage{charter} +%\usepackage{newcent} +\usepackage{lmodern} +%\usepackage{mathpazo} +%\usepackage{mathptmx} +\usepackage[colorlinks=true, urlcolor=magenta]{hyperref} +%\usepackage{verbatim} +%\usepackage{moreverb} +\usepackage{listings} +%\usepackage{fancyhdr} +%\usepackage{wrapfig} +\usepackage{color} +\usepackage{colortbl} +%\usepackage{amsmath} +%\usepackage{amssymb} +%\usepackage{mathrsfs} +%\usepackage{amsthm} +%\usepackage{makeidx} +%\usepackage{multirow} +%\usepackage{graphicx} +\usepackage{calctab} +\usepackage{dtk-logos} + + +\author{\textsc{Sebille} Robert} +\date{\today} +\title{Modèles de factures belges pour les associations} + +\definecolor{grisfonce}{gray}{0.3} +\definecolor{grisclair}{gray}{0.7} + +\definecolor{gristresclair}{gray}{0.97} + +\lstset{ +basicstyle=\footnotesize, +numbers=none, +%numberstyle=\normalsize, +%numbersep=7pt, +breakatwhitespace=false, % sets if automatic breaks should only happen at whitespace +breaklines=true, +backgroundcolor=\color{gristresclair}, +frame=single, +} + + +\begin{document} + +\maketitle + +\begin{abstract} +Documentation de l'extension \og Modèles de factures belges pour les associations \fg. L'extension comprend plusieurs modèles, disponibles dans les répertoires modeles/<nom-modele>/ et en général nommés article-<nom-modele>.tex. +\end{abstract} + + +\tableofcontents +\newpage + +\section{Généralités} + +\subsection{De quoi ai-je besoin pour créer une facture?} +\begin{itemize} + \item D'une distribution Texlive (ou équivalent) avec le paquet \og modeles-factures-belges-associations\ \fg installé; + \item du modele de facture que j'ai choisi, en général nommé \og article-<nom-modele>.tex\ \fg; + \item de manière préférable, d'un éditeur \LaTeX{} (mais ça peut fonctionner avec un éditeur texte normal) et de quelques connaissance de bases en \LaTeX{} + \item du compilateur \XeLaTeX{} +\end{itemize} + +\paragraph*{NB:} vous pouvez renommer le modèle de départ comme vous voulez, autant de fois que vous avez besoin de factures différentes; exemple: +\begin{enumerate} + \item article-<nom-modele>.tex $ \rightarrow $ facture-jean.tex; + \item article-<nom-modele>.tex $ \rightarrow $ facture-jeanne.tex; + \item article-<nom-modele>.tex $ \rightarrow $ facture-jules.tex; + \item etc. +\end{enumerate} + +\subsection{La déclaration \textbackslash usepackage[Arg]\{modeles-factures-belges-associations\}} + +\begin{lstlisting} +La déclaration \usepackage[Arg]{modeles-factures-belges-associations}, dans le préambule de <article-<nom-modele>.tex, doit comporter au moins 1 argument [Arg] de langue pour babel: french, english, etc. + +L'encodage par defaut pour \usepackage{inputenc} est UTF8, mais vous pouvez utiliser l'option [latin1] pour forcer l'encodage latin1. +\end{lstlisting} + + +\noindent +Exemples d'options pour \textbackslash usepackage[Arg]\{modeles-factures-belges-associations\}: + +\begin{lstlisting} +% retourne un encodage latin1 en français: +\usepackage[latin1, french]{modeles-factures-belges-associations} + +% retourne un encodage utf8 en français et anglais: +\usepackage[french, english]{modeles-factures-belges-associations} + +% retourne un encodage utf8 en français: +\usepackage[french]{modeles-factures-belges-associations} +\end{lstlisting} + +\subsection{Quelques unités monétaires courantes}% +\label{sub:unites_monetaire_courantes} + +Attention, le symbole \euro{} exige le package \textbackslash usepackage\{eurosym\}.% + +\begin{center}% +\begin{tabular}{|l|l|c|}% +\hline% +\rowcolor{grisclair} \textbf{Unité} & \textbf{Code} & \textbf{Résultat} \\% +\hline% +Euro & \textbackslash euro\{\} & \euro{} \\% +\hline% +Livre anglaise & \textbackslash pounds\{\} & \pounds{} \\% +\hline% +Dollar américain & \textbackslash \$\{\} & \${} \\% +\hline% +Yen japonais & \textbackslash textyen\{\} & \textyen{} \\% +\hline% +\end{tabular}% +\end{center}% + +\subsection{Les unités de longueurs}% +\label{sub:unites_longueurs} + +\begin{center}% +\begin{tabular}{|l|l|l|}% +\hline% +\rowcolor{grisclair} \textbf{Nom} & \textbf{Symbole} & \textbf{Valeur} \\% +\hline% +point & pt & 35 mm \\% +\hline% +millimètre & mm & millimètre \\% +\hline% +ex & ex & hauteur d'un \emph{x} dans la fonte courante \\% +\hline% +em & em & largeur d'un \emph{m} dans la fonte courante \\% +\hline% +centimètre & cm & centimètre \\% +\hline% +pouce & in & 2,54 cm \\% +\hline% +\end{tabular}% +\end{center}% + + +\subsection{Les abréviations de civilités}% +\label{sub:abreviations_civilites} + +\begin{center}% +\begin{tabular}{|l|l|l|}% +\hline% +\rowcolor{grisclair} \textbf{Unité} & \textbf{Code} & \textbf{Résultat} \\% +\hline% +madame & M\textbackslash up\{me\} & M\up{me}\\% +\hline% +mesdames & M\textbackslash up\{mes\} & M\up{mes}\\% +\hline% +mademoiselle & M\textbackslash up\{lle\} & M\up{lle}\\% +\hline% +mesdemoiselles & M\textbackslash up\{lles\} & M\up{lles}\\% +\hline% +maître & M\textbackslash up\{e\} & M\up{e}\\% +\hline% +maîtres & M\textbackslash up\{es\} & M\up{es}\\% +\hline% +monsieur & M. & M.\\% +\hline% +messieurs & MM. & MM.\\% +\hline% +\end{tabular}% +\end{center}% + + +\subsection{\'{E}crire les nombres en lettres en typographie française}% +\label{sub:ecrire_nombres_en_lettres} +Ce résumé est entièrement tiré de l'article \og \href{https://www.francaisfacile.com/exercices/exercice-francais-2/exercice-francais-53446.php}{ÉCRIRE LES NOMBRES EN LETTRES} \fg\ du site \href{https://www.francaisfacile.com/}{Francaisfacile.com}. Veuillez consulter ce site pour toute information complémentaire. + +\begin{itemize} + \item Les noms des nombres sont (presque tous) invariables en genre et en nombre. + \item Les nombres de 0 à 19 sont invariables; dix-sept, dix-huit, dix-neuf prennent un trait d’union; + \begin{itemize} + \item sauf zéro qui, si il est un nom, prend alors un \og s \fg\ au pluriel (exemple, s'écrire avec deux zéros). + \item Un s'accorde en genre (mais pas en nombre), y compris dans les nombres plus grands que 20. + \end{itemize} + \item Les nombres de 20 à 99; + \begin{itemize} + \item Les nombres composés jusqu'à cent prennent un trait d'union sauf lorsqu'il y a \og et \fg. + \item Cela vaut pour les particularismes: septante, septante et un, septante-deux. + \end{itemize} + \item Les nombres de 100 à 999; + \begin{itemize} + \item comme quatre-vingts, les multiples de cent prennent un \og s \fg; + \item pas de « s » à cent devant mille. + \end{itemize} + \item 1000 et après; + \begin{itemize} + \item mille est invariable. + \item million et milliard s'accordent au pluriel. + \end{itemize} + \item 1000 et après; + \begin{itemize} + \item Depuis la réforme de 1990, on peut mettre des traits d'union partout (cent soixante et onze $ \rightarrow $ cent-soixante-et-onze), excepté pour million et milliard. + \item On écrit deux cents millions, deux cents milliards mais deux cent mille (pas de \og s \fg\ à \og cent devant mille \fg). + \end{itemize} +\end{itemize} + +\section{Différences entre les modèles:} +Cette documentation correspond essentiellement au modèle basique. Les différences et spécificités propres aux différents modèles seront reprises dans leurs fichiers README-<nom-modele>.md, contenu dans leurs divers répertoires \og /modeles/<nom-modele>/\fg. +\paragraph*{Résultat des commandes (c.--à--d., les factures elle~même):} Vous pourrez les visualiser dans les fichiers articles-<nom-modele>.pdf, résultat des compilations de leurs équivalents .tex. Exemple: +\begin{enumerate} + \item article-basique.tex $ \rightarrow $ article-basique.pdf. + \item article-<autre-modele>.tex $ \rightarrow $ article-<autre-modele>.pdf. + \item etc. +\end{enumerate} + + + + +\section{Commandes} + +Comme vous le savez déjà, grâce à vos connaissance de base en \LaTeX{}, une commande dans ce langage ressemblera à \textbackslash NomCommande\{\} et une variable à \textbackslash nomVariable. Les variables contiennent des valeurs qui nous seront utiles, et les commandes serviront le plus souvent à simplifier les \og choses\ \fg pour construire la facture. + +Vous aurez peut~être remarqué aussi que toutes les commandes et variables de nos modèles débutent par \textbackslash rsfb\dots + +\begin{lstlisting} +\rsfbNomDeLaCommande{} +\rsfbnomDeLaVariable +\end{lstlisting} + +Il y a en effet vraiment peu de chance qu'une commande \LaTeX{} commence un jour par +un \textbackslash rsfb\dots, comme dans \og \emph{r}obert \emph{s}ebille \emph{f}actures \emph{b}elges \fg. \ +Les spécialistes pourront appeller cela une \og protection contre le manque d'espace de nommage en \LaTeX{}\ \fg; mais on n'est pas des spécialistes ;), continuons \ldots. + + +\subsection{Commandes en général} + +Dans le modèle basique, la commande suivante sert à donner au compilateur de facture le n\textsuperscript{o} de compte en banque où payer, ainsi qu'une date limite de paiement, et produira (alignée à droite dans ce modèle) le résultat suivant: \\ + +\og A payer au compte bancaire BEXX XXXX XXXX XXXX avant le JJ mois AAAA. \fg. \\ + +Elle sera présentée et documentée à l'intérieur du modèle, en générale de cette manière, prête à l'emploi: + +\begin{lstlisting} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Entrée du compte bancaire créditeur %% +%% et de la date limite de paiement. %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \compteBancaireEtDateLimiteDePaiement{n° compte}{JJ mois AAAA} +\rsfbCompteBancaireEtDateLimiteDePaiement{BE95 0011 8359 9858}{JJ mois AAAA} +\end{lstlisting} + +La plupart des entrées ressembleront à celle ci-dessus, ou seront expliquées de manière utilisables directement. \\ + +Certaines entrées demanderont une explication plus élaborée, c'est le cas du tableau des adresses (qui facture?, à qui?, lieu de livraison?) et de celui des produits (ce qu'on facture et combien); voici: + + +\subsection{Tableau des adresses: expédition, facturation, livraison} + +\emph{On ouvre l'entête du tableau des adresses:} +\begin{lstlisting} +% À n'utiliser qu'une seule fois; +% on sera bien avisé de ne pas toucher à cette commande. +\rsfbEnteteTableauAdresses{} +\end{lstlisting} + +Les titres du tableau (expédition, facturation, livraison) peuvent être modifiés via les commandes: +\begin{lstlisting} +%%%%%%%%%%%%%%%%%%%%% +%% Titres tableaux %% +%%%%%%%%%%%%%%%%%%%%% +%% Titres du tableau d'adresses; utile si utilisé, le plus fréquent +\rsfbExpedition{Expedition} +\rsfbFacturation{Facturation} +\rsfbLivraison{Livraison} +\end{lstlisting} + + +La monnaie du tableau (\euro{} \${} \pounds{} \textyen{}) peut être modifiée via la commande: +\begin{lstlisting} +% Unité monétaire dans les titres du tableau +\rsfbMonnaieTableauProduits{\euro} +\end{lstlisting} + +\paragraph{Entrée d'une ligne d'adresses:} \emph{C'est la commande la plus complexe du modèle, c'est pourquoi elle est illustrée par plusieurs exemples, aussi bien dans ce document que dans le modèle.} + +\begin{lstlisting} +% Syntaxe +\rsfbLigneTableauAdresses{itemAdresseExpedition}{itemAdresseFacturation}{itemAdresseLivraison} +\end{lstlisting} + +\begin{itemize} + \item Il y a 3 types d'adresses: adresse d'expédition; adresse de facturation; adresse de livraison. + \item Elles sont présentées en tableau, dans l'ordre décrit ci-dessous. + \item Chaque argument de la commande reprend un élément d'une adresse. +\end{itemize} + +\emph{Voici un 1\up{er} exemple simple:} +\begin{lstlisting} +\rsfbLigneTableauAdresses{Prénom \textsc{Nom}}{\textsc{Org 1}}{\textsc{Org 2}} +\rsfbLigneTableauAdresses{}{Nom organisation 1}{Nom organisation 2} +\rsfbLigneTableauAdresses{N\up{o} 1, rue Delarue1}{N\up{o} 2, rue Delarue2}{N\up{o} 3, rue Delarue3} +\rsfbLigneTableauAdresses{\textsc{CCC1 Ville1}}{\textsc{CCC2 Ville2}}{\textsc{CCCC Ville3}} +\end{lstlisting} + +qui donnera un résultat semblable au tableau ci-dessous: +\begin{flushleft} +\begin{tabular}{p{0.3\textwidth}p{0.3\textwidth}p{0.3\textwidth}} +\hline + Prénom \textsc{Nom} & \textsc{Org 1} & \textsc{Org 2}\\ + Nom organisation 1 & Nom organisation 2 & \\ + N\up{o} 1, rue Delarue1 & N\up{o} 2, rue Delarue2 & N\up{o} 3, rue Delarue3\\ + \textsc{CCC1 Ville1} & \textsc{CCC2 Ville2} & \textsc{CCC3 Ville3}\\ +\hline +\end{tabular} +\end{flushleft} + + +\emph{Voici un 2\up{e} exemple complexe (avec des lignes vides);} c'est celui qui est compilé par défaut dans \og article-facture.pdf \fg. +\begin{lstlisting} +\rsfbLigneTableauAdresses{Prénom \textsc{Nom}}{ \textsc{Fbg}~\textsc{Bgf}}{Voir facturation} +\rsfbLigneTableauAdresses{}{Fédération belge de gong}{} +\rsfbLigneTableauAdresses{}{Belgische gong federatie}{} +\rsfbLigneTableauAdresses{N\up{o}, rue Delarue1}{DelarueStraat, no}{} +\rsfbLigneTableauAdresses{\textsc{CCC1 Ville1}}{\textsc{CCC2 Ville2}}{} +\rsfbLigneTableauAdresses{\href{mailto:user@domain.tld}{user@domain.tld}}{\textsc{(Entité)}}{} +\rsfbLigneTableauAdresses{+32 684 037 078}{}{} +\end{lstlisting} + +qui donnera un résultat semblable au tableau ci-dessous: +\begin{flushleft} +\begin{tabular}{p{0.3\textwidth}p{0.3\textwidth}p{0.3\textwidth}} +\hline + \emph{Expédition} & \emph{Facturation} & \emph{Livraison} \\ + Prénom \textsc{Nom} & \textsc{Fbg Bgf} & Voir facturation \\ + & Fédération belge de gong & \\ + & Belgische gong federatie & \\ + N o , rue Delarue1 & DelarueStraat, no & \\ + CCC1 Ville1 & CCC1 Ville1 & \\ + \href{mailto:user@domain.tld}{user@domain.tld} & (Entité) & \\ + +32 684 037 078 & & \\ +\hline +\end{tabular} +\end{flushleft} + + +\emph{Et un 3\up{e}, si ça vous intéresse, un exemple avec des lignes vides:} +\begin{lstlisting} +\rsfbLigneTableauAdresses{}{}{} +\rsfbLigneTableauAdresses{}{}{} +\rsfbLigneTableauAdresses{}{}{} +\rsfbLigneTableauAdresses{}{}{} +\end{lstlisting} +qui ne donne évidemment, tel quel, aucun résultat. + + +\emph{Enfin, on ferme le pied du tableau des adresses:} +\begin{lstlisting} +% À n'utiliser qu'une seule fois; +% on sera bien avisé de ne pas toucher à cette commande. +\rsfbPiedTableauAdresses{} +\end{lstlisting} + +\subsection{Tableau des produits, avec le package calctab} + +On ne va pas réinventer le monde, mais simplement réutiliser les commandes +simples et efficaces du package calctab, dans son environnement xcalctab. Voici tel quel un extrait de article-basique.tex + + +\begin{lstlisting} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des produits, avec le package calctab, %% +%% on choisit xcalctab, DEBUT %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% On ne va pas réinventer le monde, mais simplement +%% réutiliser les commandes simples et efficaces du +%% package calctab, dans son environnement xcalctab + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Ensuite le tableau des produits avec nature, +%% quantité, coût et TVA + +% On ouvre l'environnement xcalctab +\begin{xcalctab} +%% calctab est en police police sans empattements +%% (sf, pour sans serif), +%% on remet en normalfont de ce document +\normalfont +%% On ajoute des produits +% \amount{nature}{quantité}{prix unitaire} +%% si amount comporte un id comme ci-dessous, +%% on pourra lui appliquer une remise (-) (ou une taxe (+)) +%% avec la commande \perc[identificateur]{Intitulé}{+/-pourcentage} +%% une id s'écrit ainsi: [id=identificateur] identificateur = 1 seul mot entier! +% \amount[id=identificateur]{nature}{quantité}{prix unitaire} +%% Simple, non? + +% produits (avec ou sans id) +\amount[id=un]{Produit Un}{5}{100,20} +\amount[id=deux]{Produit Deux}{2}{1000,40} +\amount[id=trois]{Produit Trois}{1}{500,0} +% Le champ addition des prix hors tva, peut avoir sa propre id +\add[id=phtva,un,deux,trois]{Prix HTVA} + +% TVA, idem: +\perc[id=tva6,un]{TVA}{6} +\perc[id=tva21,deux,trois]{TVA}{21} + +% Grand total: +\add[phtva,tva6,tva21]{Total} + +% On ferme l'environnement xcalctab +\end{xcalctab} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des produits, avec le package calctab, FIN %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +\end{lstlisting} + + +\paragraph{Et ci-dessous, le résultat:} le tableau des produits, avec le package calctab. + +\emph{Les totaux sont calculés automatiquement!} + +\ctcurrency{\euro} +\ctdescription{Nature} +\ctontraslation{sur} +\ctheaderone{Quantité} +\ctheadertwo{Prix unit.} + + +\begin{xcalctab} +\normalfont +\amount[id=un]{Produit Un}{5}{100,20} +\amount[id=deux]{Produit Deux}{2}{1000,40} +\amount[id=trois]{Produit Trois}{1}{500,0} +\add[id=phtva,un,deux,trois]{Prix HTVA} + +\perc[id=tva6,un]{TVA}{6} +\perc[id=tva21,deux,trois]{TVA}{21} + +% Grand total: +\add[phtva,tva6,tva21]{Total} + +% On ferme l'environnement xcalctab +\end{xcalctab} + + +\subsection{Un texte libre sous le tableau des produits} + +Enfin, sous le tableau des produits, un espace où vous pouvez exprimer du texte libre, \ldots + +\begin{lstlisting} +%%%%%%%%%%%%%%%%%%%%%%%%% +%% Texte libre, DEBUT. %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +\paragraph*{Description du produit:} + Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla rhoncus est ac viverra lacinia. Etiam pulvinar tempus rutrum. Maecenas vel metus metus. + +\paragraph*{\'{E}tendue des fournitures:} +\begin{itemize} + \item La livraison du produit Un s'étend sur 5 semaines, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine; + \item La livraison des produits Deux \& Trois s'étend sur 2 mois, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine. +\end{itemize} + +%%%%%%%%%%%%%%%%%%%%%%% +%% Texte libre, FIN. %% +%%%%%%%%%%%%%%%%%%%%%%% +\end{lstlisting} + +et qui donnerait ceci: \\ + +\paragraph*{Description du produit:} + Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla rhoncus est ac viverra lacinia. Etiam pulvinar tempus rutrum. Maecenas vel metus metus. + +\paragraph*{\'{E}tendue des fournitures:} +\begin{itemize} + \item La livraison du produit Un s'étend sur 5 semaines, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine; + \item La livraison des produits Deux \& Trois s'étend sur 2 mois, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine. +\end{itemize} + + +\end{document} diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-about.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-about.tex new file mode 100644 index 00000000000..2a735c5866b --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-about.tex @@ -0,0 +1,20 @@ + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\newcommand{\rsfbvarname} {Modèles de factures belges pour les associations} % +\newcommand{\rsfbvarversion} {0.1} % +\newcommand{\rsfbvardate} {2018/11/14} % +\newcommand{\rsfbvarauthor} {Robert Sebille, Rudy Cassart} % +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Prefix = \rsfb % +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Author : Robert Sebille, Rudy Cassart +% Status : Maintained +% Email : robert@sebille.name +% Package URL: https://www.ctan.org/pkg/modeles-factures-belges-associations +% Bug tracker: https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/issues +% Repository : https://gitlab.adullact.net/zenjo/modeles-factures-belges-associations/tree/master +% Copyright : (c) Robert Sebille 2018 - +% Licence : Released under the LaTeX Project Public License v1.3c +% or later, see http://www.latex-project.org/lppl.txt +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Depend de calctab, fancyhdr, ifthen, eurosym, hyperref, multirow, color, colortbl diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-atomes.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-atomes.tex new file mode 100644 index 00000000000..cec4db06eee --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-atomes.tex @@ -0,0 +1,25 @@ + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Facture & note de frais communs %% +%% permet de choisir l'unité monétaire ailleurs que dans le tableau +%% des produits pour la facture (package cactab). +%% \euro (defaut), \pounds (livre anglaise) \$ (dollar américain) \textyen (yen japonais) +%% Decomenter ci-dessous pour voir les unités +%%\$ \pounds \euro \textyen +\newcommand{\rsfbChoisirUniteMonetaire}[1]{\newcommand{\rsfbchoisirUniteMonetaire}{#1}} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Facture & note de frais communs %% +%% \rsfbAerationVerticale fixe la longueur de l'espacement vertical, par defaut 1.5 cm +%% et permet d'aérer la page verticalement; le paramètre est une mesure LaTeX +%% TeX comprend six unités de mesure : +%% + pt point = 0,35 mm +%% + mm millimètre +%% + ex correspond à la hauteur d'un x dans la fonte courante +%% + em correspond à la largeur d'un m dans la fonte courante +%% + cm centimètre +%% + in pouce = 2,54 cm +\newlength{\rsfbespaceVertical} +\newcommand{\rsfbAerationVerticale}[1]{\setlength{\rsfbespaceVertical}{#1}} diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-entites.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-entites.tex new file mode 100644 index 00000000000..697c0b7f3ec --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-entites.tex @@ -0,0 +1,53 @@ + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \rsfbNoDate Numéro et date de la facture %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\newcommand{\rsfbNoDate}[2]{ +\begin{center} +\textcolor{grisfonce}{{\Huge Facture #1}\\ {\large du #2}} +\end{center} +} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des adresses, 3 adresses, DEBUT %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% les adresses expédition, facturation et livraison +%% \rsfbEnteteTableauAdresses ouvre l'entête du tableau des adresses; +%% a n'utiliser qu'une seule fois dans le document principal. +\newcommand{\rsfbEnteteTableauAdresses}{ +\noindent +\begin{tabular}{p{0.3\textwidth}p{0.3\textwidth}p{0.3\textwidth}} +\hline\\ +\textcolor{grisfonce} {\emph{\rsfbexpedition{}}} & \textcolor{grisfonce}{\emph{\rsfbfacturation{}}} & \textcolor{grisfonce}{\emph{\rsfblivraison{}}} \\ +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \rsfbLigneTableauAdresses{}{}{} entrée d'une ligne d'adresse, +%% dans l'ordre expédition, facturation, livraison +\newcommand{\rsfbLigneTableauAdresses}[3]{#1 & #2 & #3 \\} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \rsfbPiedTableauAdresses ferme le pied du tableau des adresses; +%% à n'utiliser qu'une seule fois dans le document principal. +\newcommand{\rsfbPiedTableauAdresses}{ +\hline\\ +\end{tabular} +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau d'adresses, 3 adresses, FIN %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \compteBancaireEtDateLimiteDePaiement: le n° de compte en banque et la date de paiement % +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\newcommand{\rsfbCompteBancaireEtDateLimiteDePaiement}[2]{ +\begin{flushright} +A payer au compte bancaire \emph{#1} avant le #2.\\ +\end{flushright} +} diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-meta.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-meta.tex new file mode 100644 index 00000000000..2d5c47ad49a --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/extensions/facture-meta.tex @@ -0,0 +1,90 @@ + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Chargement des extensions %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +\RequirePackage{fontspec} + +%\RequirePackage{fontenc} + +\RequirePackage[top=2 cm, bottom=2 cm, left=2.5 cm, right=2.5 cm]{geometry} +\RequirePackage{soul} +\RequirePackage{ulem} +\RequirePackage{eurosym} +\RequirePackage{lmodern} +\RequirePackage{color} +\RequirePackage{colortbl} +\RequirePackage[colorlinks=true, urlcolor=magenta]{hyperref} +\RequirePackage{mathtools} +\RequirePackage{amssymb} +\RequirePackage{mathrsfs} +\RequirePackage{multirow} +\RequirePackage{fancyhdr} +\RequirePackage{array} +\RequirePackage{ifthen} + +\RequirePackage{calctab} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Déclaration des options %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +\newif\if@latinUn \@latinUnfalse +\DeclareOption{latin1}{\@latinUntrue} + +%% \DeclareOption{option}{...} +\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{babel}} +\ProcessOptions + +\RequirePackage{babel} + +\if@latinUn + \RequirePackage{inputenc} + \newcommand{\rsfbEncodage}{latin1} +\else +% \RequirePackage[utf8]{inputenc} + \newcommand{\rsfbEncodage}{UTF8} +\fi + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Définition des commandes %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Toutes les commandes sont obligatoirement sous la forme \rsfbQuelqueChose %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Couleurs de mise en évidence +\definecolor{grisfonce}{gray}{0.3} +\definecolor{grisclair}{gray}{0.7} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \rsfbCredit permet d'ajouter les crédits dans le footer. +\pagestyle{fancy} +\fancyhf{} +\renewcommand{\headrulewidth}{0pt} +\newcommand{\rsfbCredit}{ +\fancyfoot[EOC]{\footnotesize Extension \og \rsfbvarname \fg, V \rsfbvarversion, \rsfbvardate, \copyright\ \rsfbvarauthor.} +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Titres du tableau d'adresses +\newcommand{\rsfbExpedition}[1]{\newcommand{\rsfbexpedition}{#1}} +\newcommand{\rsfbFacturation}[1]{\newcommand{\rsfbfacturation}{#1}} +\newcommand{\rsfbLivraison}[1]{\newcommand{\rsfblivraison}{#1}} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Titres du tableau des produits +\newcommand{\rsfbNatureTableauProduits}[1]{\ctdescription{#1}} +\newcommand{\rsfbQuantiteTableauProduits}[1]{\ctheaderone{#1}} +\newcommand{\rsfbPuTableauProduits}[1]{\ctheadertwo{#1}} + + +%% + quelques autres paramètres utiles du tableau des produits: +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Par défaut 2 décimales, c'est plutôt correct, non? +\newcommand{\rsfbNbDecimalesTableauProduits}[1]{\nprounddigits{#1}} +% Unité monétaire dans le header du tableau +\newcommand{\rsfbMonnaieTableauProduits}[1]{\ctcurrency{#1}} +% Et le mot "sur" ("on" en anglais) +\newcommand{\rsfbSurTableauProduits}[1]{\ctontraslation{#1}} diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/README-basique.md b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/README-basique.md new file mode 100644 index 00000000000..3561129421c --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/README-basique.md @@ -0,0 +1,3 @@ +Voir la documentation générale: +documentation/modeles-factures-belges-associations-doc.pdf +elle est basée sur ce modèle.
\ No newline at end of file diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.pdf b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.pdf Binary files differnew file mode 100644 index 00000000000..aaab64a2cc0 --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.pdf diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.tex b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.tex new file mode 100644 index 00000000000..345ed921f1f --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/modeles/basique/article-basique.tex @@ -0,0 +1,235 @@ +\documentclass[a4paper,10pt]{article} + +%% Au moins 1 argument obligatoire pour babel [french, english, ...] +%% L'encodage par defaut pour inputenc est utf8, mais vous pouvez utiliser l'option [latin1] +%% vous pouvez ensuite utiliser \rsfbEncodage{} pour vérifier l'encodage latin1ou utf8 +%% Exemples d'options (nb: si vous changez les options, compilez 2 fois de suite): +%\usepackage[latin1, french]{facture-belge-simple-sans-tva} % latin1, français +%\usepackage[french, english]{facture-belge-simple-sans-tva} % utf8, français, anglais +\usepackage[french]{../../modeles-factures-belges-associations} % utf8, français + +\begin{document} + +%% pour vérifier l'encodage UTF-8 ou latin1 +%\rsfbEncodage{} + +%%%%%%%%%%%%%%%%%%%%% +%% Titres tableaux %% +%%%%%%%%%%%%%%%%%%%%% +%% Titres du tableau d'adresses; utile si utilisé, le plus fréquent +\rsfbExpedition{Expedition} +\rsfbFacturation{Facturation} +\rsfbLivraison{Livraison} + +%% Titres du tableau des produits: +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% La monnaie est fixée juste en dessous de ceci +%% et au dessus du point "Unité monétaire atomique" +\rsfbNatureTableauProduits{Nature} +\rsfbQuantiteTableauProduits{Quantité} +\rsfbPuTableauProduits{Prix unit.} + +%% + quelques autres paramètres utiles du tableau des prodsuits: +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Par défaut 2 décimales, c'est plutôt correct, non? +\rsfbNbDecimalesTableauProduits{2} +% Et le mot "sur" ("on" en anglais) +\rsfbSurTableauProduits{sur} +% Unité monétaire dans les titres du tableau +\rsfbMonnaieTableauProduits{\euro} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Unité monétaire atomique %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% permet de choisir l'unité monétaire, sauf dans le header du tableau (package calctab) +%% \euro (defaut), \pounds (livre anglaise) \$ (dollar américain) \textyen (yen japonais) +%% pour être cohérent, les 2 unités \rsfbChoisirUniteMonetaire{\unite} +%% \ctcurrency{\unite} doivent ëtre les mêmes +% Decommenter ci-dessous pour voir les unités +% \${} \pounds{} \euro{} \textyen{} +\rsfbChoisirUniteMonetaire{\euro} + +%% Peut être utile, où vous voulez, dans le texte: +%% Décommenter pour afficher l'unité monétaire atomique choisie: +%\rsfbchoisirUniteMonetaire{} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Aération de la facture %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%% permet d'aérer la page verticalement; le paramètre est une mesure LaTeX +%% TeX comprend six unités de mesure : +%% + pt point = 0,35 mm +%% + mm millimètre +%% + ex correspond à la hauteur d'un x dans la fonte courante +%% + em correspond à la largeur d'un m dans la fonte courante +%% + cm centimètre +%% + in pouce = 2,54 cm +%\rsfbAerationVerticale{0.3cm} +%\rsfbAerationVerticale{1.5cm} +%\rsfbAerationVerticale{1cm} +\rsfbAerationVerticale{0.5cm} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Numéro et date de la facture %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%\rsfbNoDate{<numéro=nombre>}{date=chaine}. +% (Dé)commenter pour version avec ou sans mention n° +%% \rsfbNoDate{n° 1}{jj mois AAAA}, avec mention n° +\rsfbNoDate{n\textsuperscript{o}X}{JJ mois AAAA} +%% \rsfbNoDate{1}{jj mois AAAA}, sans mention n° +%\rsfbNoDate{X}{JJ mois AAAA} + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% Aération du texte %% +\vspace{\rsfbespaceVertical} +%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des adresses (3): expédition, facturation, livraison DEBUT %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% On ouvre l'entête du tableau des adresses; à n'utiliser qu'une seule fois. +\rsfbEnteteTableauAdresses{} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Entrée d'une ligne d'adresse, dans l'ordre expédition, facturation, livraison + +%% 1) Voici un exemple complexe: +\rsfbLigneTableauAdresses{Prénom \textsc{Nom}}{ \textsc{Fbg}~\textsc{Bgf}}{Voir facturation} +\rsfbLigneTableauAdresses{}{Fédération belge de gong}{} +\rsfbLigneTableauAdresses{}{Belgische gong federatie}{} +\rsfbLigneTableauAdresses{N\up{o}, rue Delarue1}{DelarueStraat, no}{} +\rsfbLigneTableauAdresses{\textsc{CCC1 Ville1}}{\textsc{CCC2 Ville2}}{} +\rsfbLigneTableauAdresses{\href{mailto:user@domain.tld}{user@domain.tld}}{}{} +\rsfbLigneTableauAdresses{+32 684 037 078}{}{} +\rsfbLigneTableauAdresses{BE12 3456 7890 1234}{BE98 7654 3210 9876}{} + +%% 2) Voici un exemple simple: +%\rsfbLigneTableauAdresses{\textsc{Prénom Nom}}{\textsc{Org 1}}{\textsc{Org 2}} +%\rsfbLigneTableauAdresses{}{Nom organisation 1}{Nom organisation 2} +%\rsfbLigneTableauAdresses{N\up{o}, rue Delarue1}{N\up{o}, rue Delarue2}{N\up{o}, rue Delarue3} +%\rsfbLigneTableauAdresses{\textsc{CCC1 Ville1}}{\textsc{CCC2 Ville2}}{\textsc{CCCC Ville3}} + +%% 3) et enfin, si vous voulez, des lignes vides: +%\rsfbLigneTableauAdresses{}{}{} +%\rsfbLigneTableauAdresses{}{}{} +%\rsfbLigneTableauAdresses{}{}{} +%\rsfbLigneTableauAdresses{}{}{} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% on ferme le pied du tableau des adresses; à n'utiliser qu'une seule fois. +\rsfbPiedTableauAdresses{} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des adresses (3): expédition, facturation, livraison FIN %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% Aération du texte %% +\vspace{\rsfbespaceVertical} +%%%%%%%%%%%%%%%%%%%%%%%%% + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des produits, avec le package calctab, on choisit xcalctab, DEBUT %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% On ne va pas réinventer le monde, mais simplement réutiliser les commandes +%% simples et efficaces du package calctab, dans son environnement xcalctab + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Ensuite le tableau des produits avec nature, quantité, coût et éventuelles +%% remises + +% On ouvre l'environnement xcalctab +\begin{xcalctab} +%% calctab est en police police sans empattements (sf, pour sans serif), +%% on remet en normalfont de ce document +\normalfont +%% On ajoute des produits +% \amount{nature}{quantité}{prix unitaire} +%% si amount comporte un id comme ci-dessous, on pourra lui appliquer une remise (-) (ou une taxe (+)) +%% avec la commande \perc[identificateur]{Intitulé}{+/-pourcentage} +%% une id s'écrit ainsi: [id=identificateur] identificateur = 1 seul mot entier! +% \amount[id=identificateur]{nature}{quantité}{prix unitaire} +%% Simple, non? + +% produits (avec ou sans id) +\amount[id=un]{Produit Un}{5}{100,20} +\amount[id=deux]{Produit Deux}{2}{1000,40} +\amount[id=trois]{Produit Trois}{1}{500,0} +\add[id=phtva,un,deux,trois]{Prix HTVA} + +% TVA: +\perc[id=tva6,un]{TVA}{6} +\perc[id=tva21,deux,trois]{TVA}{21} + +% Grand total: +\add[phtva,tva6,tva21]{Total} + +% On ferme l'environnement xcalctab +\end{xcalctab} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Tableau des produits, avec le package calctab, FIN %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% Aération du texte %% +\vspace{\rsfbespaceVertical} +%%%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% Texte libre, DEBUT. %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +\paragraph*{Description du produit:} + Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla rhoncus est ac viverra lacinia. Etiam pulvinar tempus rutrum. Maecenas vel metus metus. Quisque tempus tempor metus, vitae interdum purus vehicula ac. Duis purus tortor, ultricies eu nunc eget, aliquet ullamcorper lectus. Duis eget luctus nisl, non molestie quam. Cras volutpat egestas arcu, ac blandit felis scelerisque quis. Morbi vestibulum feugiat facilisis. + +Ut sed augue pharetra, viverra sapien in, tincidunt magna. Sed a feugiat tortor. Mauris maximus posuere egestas. Nulla interdum nisl quis ex eleifend, accumsan posuere libero vehicula. + +\paragraph*{\'{E}tendue des fournitures:} +\begin{itemize} + \item La livraison du produit 1 s'étend sur 5 semaines, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine; + \item La livraison du produit eget luctus nisl s'étend sur 2 mois, du JJ/MM/AAAA au JJ/MM/AAAA, 1 quantité par semaine. +\end{itemize} + +%%%%%%%%%%%%%%%%%%%%%%% +%% Texte libre, FIN. %% +%%%%%%%%%%%%%%%%%%%%%%% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Entrée du compte bancaire créditeur et de la date limite de paiement. %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \compteBancaireEtDateLimiteDePaiement{n° compte}{JJ mois AAAA} +\rsfbCompteBancaireEtDateLimiteDePaiement{BE95 0011 8359 9858}{JJ mois AAAA} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Ajoute les crédits en footer. %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\rsfbCredit{} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Ci-dessous, les lignes du haut et du bas %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +\begin{figure}[t] +\begin{center} +%\includegraphics[scale=0.3]{\rsfbLocalPath ressources/line_haut.png} +\end{center} +\end{figure} + + +\begin{figure}[b] +\begin{center} +%\includegraphics[scale=0.3]{\rsfbLocalPath ressources/line_bas.png} +\end{center} +\end{figure} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_bas.png b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_bas.png Binary files differnew file mode 100644 index 00000000000..2fd1959b930 --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_bas.png diff --git a/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_haut.png b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_haut.png Binary files differnew file mode 100644 index 00000000000..0d41853b497 --- /dev/null +++ b/Master/texmf-dist/doc/latex/modeles-factures-belges-assocs/ressources/line_haut.png |