diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex')
59 files changed, 4290 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/xsim/README b/Master/texmf-dist/doc/latex/xsim/README new file mode 100644 index 00000000000..b8da799ff7d --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/README @@ -0,0 +1,83 @@ +-------------------------------------------------------------------------- +XSIM 2017/05/19 v0.8a + + eXercise Sheets IMproved + +-------------------------------------------------------------------------- +Clemens Niederberger +Web: https://github.com/cgnieder/xsim +E-Mail: contact@mychemistry.eu +-------------------------------------------------------------------------- +Copyright 2017 Clemens Niederberger + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3 +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of LaTeX +version 2005/12/01 or later. + +This work has the LPPL maintenance status `maintained'. + +The Current Maintainer of this work is Clemens Niederberger. +-------------------------------------------------------------------------- +The xsim package consists of the code files: + xsim.sty + xsimverb.sty + xsim.base.code.tex + xsim.blanks.code.tex + xsim.collections.code.tex + xsim.definitions.code.tex + xsim.environments.code.tex + xsim.exercises.code.tex + xsim.goals.code.tex + xsim.grades.code.tex + xsim.interface.code.tex + xsim.modules.code.tex + xsim.properties.code.tex + xsim.random.code.tex + xsim.solutions.code.tex + xsim.tags.code.tex + xsim.templates.code.tex + xsim.translations.code.tex + xsim.verbwrite.code.tex +-------------------------------------------------------------------------- +The xsim package consists of the documentation files: + README + xsim.history, xsim.ideas + xsim_manual.tex, xsim_manual.pdf + xsim-manual.cls +-------------------------------------------------------------------------- +The xsim package consists of the example files: + xsim.blanks.tex, xsim.blanks.pdf + xsim.boxed-headings.tex, xsim.boxed-headings.pdf + xsim.code-and-output.tex, xsim.code-and-output.pdf + xsim.collections.tex, xsim.collections.pdf + xsim.crossref.tex, xsim.crossref.pdf + xsim.description-list.tex, xsim.description-list.pdf + xsim.different-point-types.tex, xsim.different-point-types.pdf + xsim.difficulties.tex, xsim.difficulties.pdf + xsim.floating.tex, xsim.floating.pdf + xsim.grade-distribution.tex, xsim.grade-distribution.pdf + xsim.listings.tex, xsim.listings.pdf + xsim.multiplechoice.tex, xsim.multiplechoice.pdf + xsim.pointsums.tex, xsim.pointsums.pdf + xsim.randomexercises.tex, xsim.randomexercises.pdf + xsim.various.tex, xsim.various.pdf + xsim.texsx-199360.tex, xsim.texsx-199360.pdf + xsim.texsx-299534.tex, xsim.texsx-299534.pdf + xsim.texsx-305110.tex, xsim.texsx-305110.pdf + xsim.texsx-338165.tex, xsim.texsx-338165.pdf + xsim.texsx-350028.tex, xsim.texsx-350028.pdf + xsim.texsx-369065.tex, xsim.texsx-369065.pdf + xsim.texsx-369803.tex, xsim.texsx-369803.pdf + xsim.texsx-369686.tex, xsim.texsx-369686.pdf + xsim.texwelt-6698.tex, xsim.texwelt-6698.pdf + xsim.texwelt-15093.tex, xsim.texwelt-15093.pdf + xsim.golatex-16824.tex, xsim.golatex-16824.pdf + xsim.golatex-18844.tex, xsim.golatex-18844.pdf +-------------------------------------------------------------------------- +If you have any ideas, questions, suggestions or bugs to report, please +feel free to contact me. +-------------------------------------------------------------------------- diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.pdf Binary files differnew file mode 100644 index 00000000000..dd26d671570 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.tex new file mode 100644 index 00000000000..b479e961c2c --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.blanks.tex @@ -0,0 +1,23 @@ +\documentclass{article} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{xsim,lipsum,xcolor} + +\xsimsetup{ + solution/print = true , + blank/filled-style = \underline{\textcolor{red}{#1}} +} + +\begin{document} + +\begin{exercise}[points=3] + Erklären Sie den Begriff. + + \blank[width=4\linewidth,linespread=1.5]{} +\end{exercise} +\begin{solution} + \blank[width=4\linewidth,linespread=1.5]{Die Lösung hier soll rot sein.} +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.pdf Binary files differnew file mode 100644 index 00000000000..99ba5bbc2a6 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.tex new file mode 100644 index 00000000000..9ff47d9d992 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.boxed-headings.tex @@ -0,0 +1,30 @@ +\documentclass{article} + +\usepackage{tcolorbox} +\usepackage{xsim} +\usepackage{needspace} + +\DeclareExerciseEnvironmentTemplate{custom} + {% + \Needspace*{5\baselineskip} + \begin{tcolorbox} + \textbf{\XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}.}% + \GetExercisePropertyT{subtitle}{ \textit{#1}}% + \end{tcolorbox} + \noindent + } + {\vspace{\baselineskip}} + +\xsimsetup{exercise/template = custom} + +\usepackage{lipsum} + +\begin{document} + +\begin{exercise}[subtitle=Foo bar baz] + \lipsum[1] +\end{exercise} + +\lipsum[2] + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.pdf Binary files differnew file mode 100644 index 00000000000..bbbcfbc18a7 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.tex new file mode 100644 index 00000000000..f753f13939e --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.code-and-output.tex @@ -0,0 +1,53 @@ +\documentclass{article} +\usepackage{xsimverb,listings,xcolor} + +\lstdefinestyle{mystyle}{ + language = [AlLaTeX]TeX , + basicstyle = \ttfamily , + columns = fullflexible , + commentstyle = \color{gray!70} , + keywordstyle = \color{red!70!black} +} + +\makeatletter +\NewDocumentEnvironment{example}{o} + {% + \XSIMgobblechars{2}% + \XSIMsetfilebegin{\@percentchar\space file `\jobname.tmp'}% + \XSIMsetfileend{\@percentchar\space bye bye}% + \IfNoValueTF{#1} + {\XSIMfilewritestart*{\jobname.tmp}} + {\XSIMfilewritestart{\jobname.tmp}}% + } + {% + \XSIMfilewritestop + \lstinputlisting[style=mystyle]{\jobname.tmp}% + \input{\jobname.tmp} + } + +\NewDocumentEnvironment{code}{o} + {% + \XSIMgobblechars{2}% + \IfNoValueTF{#1} + {\XSIMfilewritestart*{\jobname.tmp}} + {\XSIMfilewritestart{\jobname.tmp}}% + } + {% + \XSIMfilewritestop + \lstinputlisting[style=mystyle]{\jobname.tmp}% + } +\makeatother + +\begin{document} + +\begin{example} + bla bla \LaTeX +\end{example} + +\bigskip + +\begin{code} + blubber \LaTeX +\end{code} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.pdf Binary files differnew file mode 100644 index 00000000000..fd785cc0574 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.tex new file mode 100644 index 00000000000..beca1910055 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.collections.tex @@ -0,0 +1,62 @@ +\documentclass{article} +\usepackage{xsim} + +\DeclareExerciseCollection{foo-easy} +\DeclareExerciseCollection{foo-medium} +\DeclareExerciseTagging{difficulty} + +\usepackage{filecontents,lipsum} +\begin{filecontents*}{foo.tex} +\begin{exercise}[difficulty=easy,points=1] + foo one \lipsum[4] +\end{exercise} +\begin{solution} + foo one \lipsum[4] +\end{solution} +\begin{exercise}[difficulty=medium,points=1] + foo two \lipsum[4] +\end{exercise} +\begin{solution} + foo two \lipsum[4] +\end{solution} +\begin{exercise}[difficulty=easy,points=1] + foo three \lipsum[4] +\end{exercise} +\begin{solution} + foo three \lipsum[4] +\end{solution} +\end{filecontents*} + +\begin{document} + +\begin{exercise} + outside before +\end{exercise} + +\collectexercises{foo-easy} +\xsimsetup{difficulty=easy} +\input{foo.tex} +\collectexercisesstop{foo-easy} +% collection `foo-easy' now contains all exercises of file `foo.tex' tagged +% with `difficulty=easy' + +\collectexercises{foo-medium} +\xsimsetup{difficulty=medium} +\input{foo.tex} +\collectexercisesstop{foo-medium} +% collection `foo-medium' now contains all exercises of file `foo.tex' +% tagged with `difficulty=medium' + +\section{Easy} +\printcollection{foo-easy} + +\section{Medium} +\printcollection{foo-medium} + +\printsolutions[difficulty=medium] + +\section{All Exercises and Their Solutions Again, in Order of Appearance} + +\printcollection[print=both]{all exercises} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.pdf Binary files differnew file mode 100644 index 00000000000..8151a0cef3f --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.tex new file mode 100644 index 00000000000..fa2fbbb509d --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.crossref.tex @@ -0,0 +1,60 @@ +\documentclass{article} +\usepackage{xsim,lipsum,hyperref} + +\DeclareExerciseHeadingTemplate{custom} + {\section{\XSIMtranslate{default-heading}}} + +\DeclareExerciseEnvironmentTemplate{custom} + {% + \IfInsideSolutionTF + {\label{sol:\ExerciseID}} + {\label{ex:\ExerciseID}} + \subsection* + {% + \XSIMmixedcase{\GetExerciseName}% + \IfInsideSolutionTF + { + to \GetExerciseParameter{exercise-name}% + ~\GetExerciseProperty{counter}% + } + {% + ~\GetExerciseProperty{counter} + \GetExercisePropertyT{subtitle} + { {\normalfont\itshape\PropertyValue}}% + }% + } + \noindent\llap{% + \footnotesize\sffamily + \IfInsideSolutionTF + {% + \XSIMmixedcase{\GetExerciseParameter{exercise-name}} + on page~\pageref{ex:\ExerciseID}.% + } + {% + \XSIMmixedcase{\GetExerciseParameter{solution-name}} + on page~\pageref{sol:\ExerciseID}.% + }% + \hspace*{\marginparsep}% + }% + } + {} +\xsimsetup{ + exercise/template = custom , + solution/template = custom , + print-solutions/headings-template = custom +} + +\begin{document} + +\section{Exercises} +\begin{exercise} + \lipsum[4] +\end{exercise} +\begin{solution} + \lipsum[4] +\end{solution} + +\clearpage +\printsolutions + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.pdf Binary files differnew file mode 100644 index 00000000000..d506ad960bc --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.tex new file mode 100644 index 00000000000..f3c9ed6d74f --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.description-list.tex @@ -0,0 +1,42 @@ +\documentclass{article} +\usepackage{xsim,lipsum} + +\DeclareExerciseEnvironmentTemplate{item} + {\item[\XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}]} + {} +\xsimsetup{ + exercise/template=item, + solution/template=item, + print-solutions/headings-template=none +} + +\newenvironment{exercises} + {\section{Exercises}\description} + {\enddescription} + +\newenvironment{solutions} + {\section{Solutions}\description} + {\enddescription} + +\begin{document} + +\begin{exercises} + \begin{exercise} + \lipsum[4] + \end{exercise} + \begin{solution} + \lipsum[3] + \end{solution} + \begin{exercise} + \lipsum[12] + \end{exercise} + \begin{solution} + \lipsum[23] + \end{solution} +\end{exercises} + +\begin{solutions} + \printsolutions +\end{solutions} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.pdf Binary files differnew file mode 100644 index 00000000000..b1de5d63253 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.tex new file mode 100644 index 00000000000..0ac35367760 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.different-point-types.tex @@ -0,0 +1,52 @@ +\documentclass{article} +\usepackage{xsim} + +\DeclareExerciseGoal{A} +\DeclareExerciseGoal{C} +\DeclareExerciseGoal{E} + +\newcommand*\printA{\TotalExerciseGoal{A}{~A~point}{~A~points}} +\newcommand*\printC{\TotalExerciseGoal{C}{~C~point}{~C~points}} +\newcommand*\printE{\TotalExerciseGoal{E}{~E~point}{~E~points}} + +\usepackage{needspace} +\DeclareExerciseEnvironmentTemplate{custom} + {% + \par\vspace{\baselineskip} + \Needspace*{2\baselineskip} + \noindent + \textbf{\GetExerciseProperty{counter}}% + \IfExercisePropertySetT{subtitle} + { \textit{\GetExerciseProperty{subtitle}}} % + \IfInsideSolutionF{% + \marginpar{% + (\IfExercisePropertySetTF{E}{\GetExerciseProperty{E}}{0}/% + \IfExercisePropertySetTF{C}{\GetExerciseProperty{C}}{0}/% + \IfExercisePropertySetTF{A}{\GetExerciseProperty{A}}{0})% + }% + }% + } + {} +\xsimsetup{ + exercise/template = custom , + solution/template = custom +} +\renewcommand*\theexercise{\arabic{exercise}.} + +\begin{document} + +Reachable: \printA, \printC, and \printE. + +\begin{exercise}[E=1] + Differentiate $y=3x^2+5x+3$. +\end{exercise} + +\begin{exercise}[E=2,C=1] + Find the equation of the tangent line to the function $y=x/2$ at $x=2$. +\end{exercise} + +\begin{exercise}[C=1,A=2] + Prove that the derivative of a constant is zero. +\end{exercise} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.pdf Binary files differnew file mode 100644 index 00000000000..846f19e2012 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.tex new file mode 100644 index 00000000000..02712f15d66 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.difficulties.tex @@ -0,0 +1,53 @@ +\documentclass{article} + +\usepackage[clear-aux]{xsim} +\DeclareExerciseTagging{difficulty} +\xsimsetup{ + difficulty={easy,hard} +} + +\DeclareExerciseEnvironmentTemplate{custom} + { + \subsection* + {% + \XSIMmixedcase {\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfExercisePropertySetT{difficulty} + { {\normalfont(\GetExerciseProperty{difficulty})}}% + \IfInsideSolutionF{% + \IfExercisePropertySetT{subtitle} + { {\normalfont\itshape\GetExerciseProperty{subtitle}}}% + }% + }% + \IfExercisePropertySetT{points} + {% + \marginpar + {% + \IfInsideSolutionF{\rule{1.2cm}{1pt}\slash}% + \GetExerciseProperty{points}% + \IfExercisePropertySetT{bonus-points} + {\nobreakspace(+\GetExerciseProperty{bonus-points})} + \nobreakspace\XSIMtranslate{point-abbr}% + }% + }% + } + {} + +\xsimsetup{exercise/template = custom} + +\begin{document} + +\begin{exercise}[difficulty=easy] + An easy question. +\end{exercise} +\begin{exercise}[difficulty=medium] + This one's a bit harder. +\end{exercise} +\begin{exercise}[difficulty=hard] + Now let’s see if you can solve this one. +\end{exercise} +\begin{exercise}[difficulty=medium] + This is medium but printed anyway +\end{exercise} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.pdf Binary files differnew file mode 100644 index 00000000000..e2e96537ef1 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.tex new file mode 100644 index 00000000000..08448df35a6 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.floating.tex @@ -0,0 +1,50 @@ +% floating exercises: +\documentclass{article} +\usepackage{xsim,newfloat,caption,lipsum} + +\DeclareFloatingEnvironment[ + fileext=loe, + listname={List of Exercises}, + name=Exercise, + placement=htp, +]{ex} + +\DeclareExerciseEnvironmentTemplate{float} + {% + \ex + \captionsetup{labelformat=empty,singlelinecheck=false,listformat=empty} + \IfExercisePropertySetTF{subtitle}{% + \XSIMexpandcode{% + \noexpand\caption{% + \noexpand\textbf{% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + }: \GetExerciseProperty{subtitle}% + }% + }% + }{% + \caption{% + \textbf{% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + }% + }% + }% + } + {\endex} + +\xsimsetup{exercise/template = float} + +\begin{document} + +\listofexs + +\begin{exercise} + \lipsum[4] +\end{exercise} + +\begin{exercise}[subtitle=Let's have a look] + \lipsum[4] +\end{exercise} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.pdf Binary files differnew file mode 100644 index 00000000000..76cf1617cbd --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.tex new file mode 100644 index 00000000000..3a324d4221f --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-16824.tex @@ -0,0 +1,131 @@ +% http://golatex.de/schueler-und-lehrerloesung-im-gleichen-texfile-t16824.html +\documentclass[fontsize=12pt,parskip=half]{scrartcl} +\usepackage[utf8]{inputenc} +\usepackage[T1]{fontenc} +\usepackage[ngerman]{babel} + +\newlength\breite +\setlength\breite{160mm} +\newlength\hoehe +\setlength\hoehe{80mm} + +\usepackage[ + hdivide={3.0cm,\breite,}, + vdivide={2.2cm,,2.2cm}]{geometry} +\usepackage[bitstream-charter]{mathdesign} + +\usepackage[babel]{microtype} + +\usepackage[inline]{enumitem} + +\usepackage{amsmath,siunitx} +\sisetup{ + locale = DE , + per-mode = fraction +} + +\usepackage{xsim,needspace,tikz,tcolorbox} + +\xsimsetup{ + exercise/template = gitter , + solution/template = gitter +} + +\DeclareExerciseEnvironmentTemplate{gitter} + {% + \IfInsideSolutionT{% + \tcolorbox[ + detach title , + title = Lösung: , + before upper = {\tcbtitle\space} , + fonttitle = \bfseries , + fontupper = \large , + valign = center , + colframe = black!50!white , + colback = black!12!white , + coltext = blue , + coltitle = blue , + height = \hoehe , + width = \breite , + sharp corners + ] + }% + } + {% + \IfInsideSolutionTF + {\endtcolorbox} + {% + \IfSolutionPrintF{% + \par + \begin{tikzpicture}[semitransparent] + \draw[step=4mm, line width=0.15mm, black!60!white] (0,0) grid + (\breite,\hoehe); + \end{tikzpicture} + \par + } + }% + } + +\begin{document} + +\begin{exercise} + Für die \textbf{Schülerausgabe} sollen Häuschen (Grid) mit Seitenlänge + \SI{4}{\mm} gesetzt werden. +\end{exercise} +\begin{solution} + Hier soll die Lösung stehen: $E=m\cdot c^2$. +\end{solution} + +\xsimsetup{solution/print=true} + +\begin{exercise} + Für die \textbf{Lehrerausgabe} sollen statt Häuschen die Lösung in + z.\,B. einer Box geschrieben werden. Dafür soll die Lösung (bezogen auf + dieses Beispiel) auch in einer Box mit der exakten Breite \SI{160}{\mm} und + der exakten Höhe \SI{80}{\mm} gesetzt werden. Weiter soll natürlich die + Position der Lösungsbox und der Häuschenbox exakt identisch sein. +\end{exercise} +\begin{solution} + Hier soll die Lösung stehen: $E=m\cdot c^2$. +\end{solution} + +\clearpage + +\begin{exercise} + Beschreiben Sie die \textbf{Satzgruppe des Pythagoras}. +\end{exercise} +\begin{solution} + \begin{align*} + \left.\begin{aligned} + c^2 &=a^2+b^2\\ + a^2 &=p\cdot c\;\wedge\; b^2=q\cdot c\\ + h^2 &=p\cdot q + \end{aligned}\right\} + \begin{gathered} + \text{Satzgruppe}\\ + \text{des Pythagoras} + \end{gathered} + \end{align*} +\end{solution} + +\begin{exercise} + Geben Sie die Formel der \textbf{gleichförmigen Bewegung} wieder. Gehen Sie + davon aus, dass Sie 1000~Meter in + \SI[parse-numbers=false]{3\frac{1}{2}}{Minuten} laufen. + \begin{enumerate*}[label=\bfseries\alph*)] + \item Mit welcher Geschwindigkeit legen Sie die Strecke zurück? + \item Geben Sie die Geschwindigkeit in \si{\km\per\hour} an. + \end{enumerate*} + \textbf{Hinweis:} Nehmen Sie zur Berechnung die vereinfachte Form und gehen + Sie davon aus, dass Ihre Geschwindigkeit konstant ist. +\end{exercise} +\begin{solution} + \begin{align*} + s &=v\cdot t+s_0 \\ + 1000 &=v\cdot 210 \\ + v &=\frac{\SI{1000}{\m}}{\SI{210}{\second}} \\ + v &=\SI{4.76}{\m\per\second} = \SI{17.1}{\km\per\hour} + \end{align*} +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.pdf Binary files differnew file mode 100644 index 00000000000..97cb4659e06 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.tex new file mode 100644 index 00000000000..aa49dd64e1b --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.golatex-18844.tex @@ -0,0 +1,94 @@ +% http://golatex.de/aufgabe-loesungs-umgebung-t18844.html +\documentclass[18pt,a4paper]{article} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{xsim,tcolorbox} +\usepackage{amsmath} +\xsimsetup{ + exercise/within = section , + exercise/the-counter = \thesection.\arabic{exercise} , + print-solutions/headings-template=none +} +\SetExerciseParameters{exercise}{ + exercise-template = mine , + solution-template = mine +} + +\DeclareExerciseEnvironmentTemplate{mine} + {% + \tcolorbox[ + % colors: + colback = white , colframe = black , coltitle = black , + % rules: + boxrule = 0pt , toprule = 1pt , bottomrule = 1pt , arc = 0pt , + % spacing: + boxsep = 0pt , left = 0pt , right = 0pt , + % title: + detach title , before upper = \tcbtitle\par\noindent , + fonttitle = \bfseries , + title = \XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter} + ] + } + {\endtcolorbox} + +\DeclareExerciseTranslation{German}{exercise}{Aufgabe} +\DeclareExerciseTagging{difficulty} + +\begin{document} + +\section{Wellenausbreitung im Vakuum und in Materie} +\subsection{Maxwellsche Gleichungen} + +\begin{align*} + \nabla \cdot \vec{E}\left(\vec{r}, t \right) = + \frac{\varrho\left(\vec{r}, t \right)}{\varepsilon_0} +\end{align*} + +\begin{exercise}[difficulty=easy] +Something stupid +\end{exercise} +\begin{solution} +Here is a nonstupid solution for your problem +\end{solution} + +\subsection{Empirischer Zugang zu Wellengleichungen} + +\begin{exercise}[difficulty=hard] +Eine weitere Aufgabe +\end{exercise} +\begin{solution} +Solution Number 2 +\end{solution} + +\subsection*{Lösungen} +\printsolutions[section,difficulty=hard] + +\section{Wellenausbreitung im Vakuum und in Materie} +\subsection{Maxwellsche Gleichungen} + +\begin{align*} + \nabla \cdot \vec{E}\left(\vec{r}, t \right) = + \frac{\varrho\left(\vec{r}, t \right)}{\varepsilon_0} +\end{align*} + +\begin{exercise}[difficulty=easy] +Something stupid +\end{exercise} +\begin{solution} +Here is a nonstupid solution for your problem +\end{solution} + +\subsection{Empirischer Zugang zu Wellengleichungen} + +\begin{exercise}[difficulty=hard] +Eine weitere Aufgabe +\end{exercise} +\begin{solution} +Solution Number 2 +\end{solution} + +\subsection*{Lösungen} +\printsolutions[section] + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.pdf Binary files differnew file mode 100644 index 00000000000..248358c4a16 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.tex new file mode 100644 index 00000000000..8e9731de24d --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.grade-distribution.tex @@ -0,0 +1,56 @@ +\documentclass{article} +\usepackage{xsim} + +\xsimsetup{grades/split=;} + +\DeclareGradeDistribution{ + 1 = 1 ; + 1,5 = .9167 ; + 2 = .8333 ; + 2,5 = .75 ; + 3 = .6667 ; + 3,5 = .5833 ; + 4 = .5 +} + +\begin{document} + +\begin{exercise}[points=4] +\end{exercise} + +\begin{exercise}[points=4] +\end{exercise} + +\begin{exercise}[points=4] +\end{exercise} + +\begin{exercise}[points=4,bonus-points=10] +\end{exercise} + +\begin{exercise}[points=4] +\end{exercise} + +\begin{exercise}[points=4] +\end{exercise} + + +\goalsforgrade{points + bonus-points}{1,5} +\goalsforgrade{points+bonus-points}{2} + +\pointsforgrade{1} +\pointsforgrade{1,5} +\pointsforgrade{2} +\pointsforgrade{2,5} +\pointsforgrade{3} +\pointsforgrade{3,5} +\pointsforgrade{4} + +\totalgoalforgrade{1} +\totalgoalforgrade{1,5} +\totalgoalforgrade{2} +\totalgoalforgrade{2,5} +\totalgoalforgrade{3} +\totalgoalforgrade{3,5} +\totalgoalforgrade{4} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.pdf Binary files differnew file mode 100644 index 00000000000..0d388f2c708 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.tex new file mode 100644 index 00000000000..6dd302feb09 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.listings.tex @@ -0,0 +1,48 @@ +% http://tex.stackexchange.com/questions/131546/ +\documentclass{article} + +\usepackage{xcolor} +\usepackage{listings} +\usepackage{xsim} + +\lstset{ + frame=single, + xleftmargin=20pt, + numbers=left, + numberstyle=\small, + tabsize=2, + breaklines, + showspaces=false, + showstringspaces=false, + language=C, + basicstyle=\small\ttfamily, + commentstyle=\itshape\color{gray} +} + +\begin{document} + +\begin{exercise}[points=6] +Consider the following C program. +\begin{lstlisting} +#include <stdio.h> + +int main(int argc, char *argv[]) { + printf("hello, world\n"); +} +\end{lstlisting} +\end{exercise} +\begin{solution} +Consider the following C program. +\begin{lstlisting} +#include <stdio.h> + +int main(int argc, char *argv[]) { + printf("hello, world\n"); +} +\end{lstlisting} +\end{solution} + +\pagebreak +\printsolutions + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.pdf Binary files differnew file mode 100644 index 00000000000..02dac6c4df9 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.tex new file mode 100644 index 00000000000..e0db3eb0c52 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.multiplechoice.tex @@ -0,0 +1,70 @@ +\documentclass{scrartcl} +\usepackage[clear-aux]{xsim} + +\usepackage{enumitem,amssymb,fmtcount} +\newlist{choices}{itemize}{1} +\setlist[choices]{label=$\Box$} +\newcommand*\choice{\item} + +\DeclareExerciseProperty{choices} +\DeclareExerciseProperty*{multiple} +\DeclareExerciseEnvironmentTemplate{mc} + {% + \UseExerciseTemplate{begin}{default}% + \IfExerciseBooleanPropertyTF{multiple} + {Select one or more correct answers} + {% + \GetExercisePropertyT{choices} + {Select \numberstringnum{#1} correct answer\ifnum#1>1 s\fi.}% + }% + \begin{choices} + } + {% + \end{choices} + \UseExerciseTemplate{end}{default}% + } + +\DeclareExerciseType{mc}{ + exercise-env = multiplechoice , + solution-env = correctchoices , + exercise-name = Question , + solution-name = Solution , + exercise-template = mc , + solution-template = mc , + counter = exercise +} + +\xsimsetup{ + exercise/name = Question , + solution/name = Solution +} + +\begin{document} + +\section{Questions} +\begin{multiplechoice}[choices=1] + \choice one + \choice two + \choice three + \choice four +\end{multiplechoice} + +\begin{exercise} + Answer this question on a separate sheet. +\end{exercise} + +\begin{multiplechoice}[multiple] + \choice one + \choice two + \choice three + \choice four +\end{multiplechoice} + +\begin{multiplechoice}[choices=2] + \choice one + \choice two + \choice three + \choice four +\end{multiplechoice} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.pdf Binary files differnew file mode 100644 index 00000000000..aa822a1bd7a --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.tex new file mode 100644 index 00000000000..29d7ac0cdc1 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.pointsums.tex @@ -0,0 +1,30 @@ +\documentclass{article} +\usepackage{xsim,lipsum} + +\NewDocumentCommand\printcompletepoints{}{% + \TotalExerciseGoals{points + bonus-points} + {\,\XSIMtranslate{point}} + {\,\XSIMtranslate{points}}% +} + +\NewDocumentCommand\pointsandbonus{}{% + \TotalExerciseGoal{points}{}{}% + \IfExerciseGoalsSumTF{bonus-points}{=0} + {} + {\,(+\,\TotalExerciseGoal{bonus-points}{}{})}% + \,\XSIMtranslate{points}% +} + +\begin{document} + +\begin{exercise}[points=3,bonus-points=1] + \lipsum[4] +\end{exercise} + +\begin{exercise}[points=8,bonus-points=3] + \lipsum[4] +\end{exercise} + +\printtotalpoints\ vs.\@ \printcompletepoints\ vs.\@ \pointsandbonus + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.pdf Binary files differnew file mode 100644 index 00000000000..773d34f495b --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.tex new file mode 100644 index 00000000000..60877b1a4ab --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.randomexercises.tex @@ -0,0 +1,58 @@ +\documentclass{article} +\usepackage{xsim} + +\DeclareExerciseCollection{foo} + +\usepackage{filecontents} +\begin{filecontents*}{random.tex} +\begin{exercise}[ID=A] + exercise A +\end{exercise} +\begin{solution} + solution A +\end{solution} +\begin{exercise}[ID=B] + exercise B +\end{exercise} +\begin{solution} + solution B +\end{solution} +\begin{exercise}[ID=C] + exercise C +\end{exercise} +\begin{solution} + solution C +\end{solution} +\begin{exercise}[ID=D] + exercise D +\end{exercise} +\begin{solution} + solution D +\end{solution} +\begin{exercise}[ID=E] + exercise E +\end{exercise} +\begin{solution} + solution E +\end{solution} +\begin{exercise}[ID=F] + exercise F +\end{exercise} +\begin{solution} + solution F +\end{solution} +\end{filecontents*} + +\begin{document} + +\collectexercises{foo} +\input{random.tex} +\collectexercisesstop{foo} + +\section*{Exercises} +\printrandomexercises[collection=foo,exclude=D]{3} + +\section*{Solutions} +\printsolutions* + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.pdf Binary files differnew file mode 100644 index 00000000000..94925495985 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.tex new file mode 100644 index 00000000000..334275140ab --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-199360.tex @@ -0,0 +1,60 @@ +% http://tex.stackexchange.com/a/199360/ +\documentclass{scrartcl} +\usepackage[clear-aux]{xsim} + +\usepackage{tcolorbox,blindtext} + +\DeclareExerciseEnvironmentTemplate{custom} + {% + \begin{tcolorbox}[ + width = \textwidth , + colbacktitle = \IfInsideSolutionTF{green}{red} , + coltitle = black , + title = {\XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}}]} + {\end{tcolorbox}} + +\xsimsetup{ + exercise/template = custom , + solution/template = custom +} + +\begin{document} + +\begin{exercise} + First Question +\end{exercise} +\begin{solution} + Yes, it's a question +\end{solution} + +\begin{exercise}[print=false,use] + Question: What is special about Brontosaurs? +\end{exercise} +\begin{solution} + They are thin at one end, thick in the middle and thin on the end again +\end{solution} + +\begin{exercise} + Proof +\begin{equation} + a^2 + b^2 = c^2 +\end{equation} +\end{exercise} +\begin{solution} + to be done +\end{solution} + +\begin{exercise} + Cite a Latin Text +\end{exercise} +\begin{solution} + \textcolor{blue}{\blindtext} +\end{solution} + +\begin{exercise} + \textcolor{red}{\textbf{Cite a Latin text again}} +\end{exercise} + +\printsolutions* + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.pdf Binary files differnew file mode 100644 index 00000000000..c006aeb34c3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.tex new file mode 100644 index 00000000000..1c2be46df39 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-299534.tex @@ -0,0 +1,32 @@ +% http://tex.stackexchange.com/q/299534/ +\documentclass{article} +\usepackage{pythontex} +\usepackage{xsim} + +\begin{document} + +\section{Test} + +\begin{exercise}[subtitle = Codeless Question,points=10] + A question without code, worth 10 points. Subtitle and point values are in + correct place. +\end{exercise} +\begin{solution} + Solution 1 +\end{solution} + +\begin{exercise}[subtitle = Codeful Question,points=15] +Now with PythonTeX: +\begin{pyblock} +print("hello, world!") +sum = 0 +for j in range(0,100): + sum += j +print(sum) +\end{pyblock} +\end{exercise} +\begin{solution} + Solution 2 +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.pdf Binary files differnew file mode 100644 index 00000000000..fb92e875a91 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.tex new file mode 100644 index 00000000000..c10928da0ce --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-305110.tex @@ -0,0 +1,67 @@ +% https://tex.stackexchange.com/q/305110 +\documentclass[12pt, a4paper]{book} +\usepackage{xsim} + +\xsimsetup{ + exercise/within = section , + exercise/the-counter = \thesection.\arabic{exercise} +} + +\begin{document} +\part{EXCERCISES} +\chapter{Topic 1} + +\section{Section} + +\begin{exercise} + I'm an excercise. +\end{exercise} +\begin{solution} + I'm a solution. +\end{solution} + +\section{Section} + +\begin{exercise} + I'm an excercise. +\end{exercise} +\begin{solution} + I'm a solution. +\end{solution} + +\chapter{Topic 2} + +\section{Section} +\begin{exercise} + I'm an excercise. +\end{exercise} +\begin{solution} + I'm a solution. +\end{solution} + +\section{Section} +\begin{exercise} + I'm an excercise. +\end{exercise} +\begin{solution} + I'm a solution. +\end{solution} + +\setcounter{chapter}{0} +\part{SOLUTIONS} + +\chapter{Topic 1} +\section{Section} +\printsolutions[chapter=1,section=1] + +\section{Section} +\printsolutions[chapter=1,section=2] + +\chapter{Topic 2} +\section{Section} +\printsolutions[chapter=2,section=1] + +\section{Section} +\printsolutions[chapter=2,section=2] + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.pdf Binary files differnew file mode 100644 index 00000000000..f6557530a1d --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.tex new file mode 100644 index 00000000000..e48d8880dab --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-338165.tex @@ -0,0 +1,72 @@ +% http://tex.stackexchange.com/q/338165 +\documentclass{article} +\usepackage[T1]{fontenc} +\usepackage{leading,microtype} +\usepackage[french]{babel} + +\usepackage{tasks} +\usepackage{xsim} +\usepackage{tcolorbox} +\tcbuselibrary{breakable, skins} +\settasks{ + counter-format = tsk. +} + +\DeclareExerciseEnvironmentTemplate{boxed} + {% + \tcolorbox[ + enhanced , + attach boxed title to top center = {yshift=-7.5pt} , + colback = white , colbacktitle = white , + coltitle = black , colframe = black , + boxed title style = { colframe = white } , + fonttitle=\bfseries, + sharp corners=all, + breakable, + title= + \XSIMmixedcase{\GetExerciseName}% + \IfInsideSolutionF{% + ~\GetExerciseProperty{counter}% + \IfExercisePropertySetT{subtitle}{: \GetExerciseProperty{subtitle}}% + }% + ] + } + {\endtcolorbox} + +\xsimsetup{ + exercise/template = boxed , + solution/template = boxed , + solution/print = true +} + +\leading{15pt} + +\newcommand*\complement{\overline} +\newcommand*\union{\cup} +\newcommand*\intersection{\cap} +\newcommand*\set[1]{\{#1\}} + +\begin{document} + +\begin{exercise}[subtitle=Set Calculus] + Soient $E=\set{1,2,3,4,5,6,7}$ et $A$, $B$, $C$ et $D$ quatre parties de E + d\'efinies par $A=\set{1,2,3,4}$, $B=\set{4,5,6,7}$, $C=\set{1,3,5,7}$ et + $D=\set{2,3,4,5,6}$. + \begin{tasks}(2) + \task Calculer $\complement{A}$. + \task Calculer $(A\union B) \intersection (C\union D)$. + \task Calculer $(A\intersection B) \union (C\intersection D)$. + \task Calculer $\complement{(\complement{A}\union B)} \union + \complement{(C\intersection D)}$. + \end{tasks} +\end{exercise} +\begin{solution} + \begin{tasks}(2) + \task $\set{5,6,7}$ + \task $E$ + \task $\set{3,4,5}$ + \task $\set{1,2,3,4,6,7}$ + \end{tasks} +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.pdf Binary files differnew file mode 100644 index 00000000000..ef781218a8e --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.tex new file mode 100644 index 00000000000..ebe090413c9 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-350028.tex @@ -0,0 +1,135 @@ +% http://tex.stackexchange.com/q/350028/ +\documentclass{book} + +\usepackage{xsimverb} +\usepackage{xsim} +\usepackage[most]{tcolorbox} +\tcbuselibrary{skins,breakable} + +\DeclareExerciseEnvironmentTemplate{tcolorbox} + {% + \tcolorbox[ + enhanced, + colframe=green!20!black, + colback=yellow!10!white, + coltitle=green!40!black, + fonttitle=\bfseries, + underlay={% + \begin{tcbclipinterior} + \shade[ + inner color=\IfInsideSolutionTF{red!50!yellow}{green!80!yellow}, + outer color=yellow!10!white] + (interior.north west) circle (2cm); + \draw[help lines,step=5mm,yellow!80!black,shift={(interior.north west)}] + (interior.south west) grid (interior.north east); + \end{tcbclipinterior}% + }, + attach title to upper=\quad, + title = \XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter} + \IfExercisePropertySetT{points}{% + (\GetExerciseProperty{points} + \IfExerciseGoalSingularTF{points} + {\XSIMtranslate{point}} + {\XSIMtranslate{points}})% + }]% + \IfInsideSolutionT{\label{solution:\ExerciseID}}% + } + {% + \endtcolorbox + \vspace*{\baselineskip} + \IfInsideSolutionTF + {% + \noindent Exercise~\GetExerciseProperty{counter} is on + page~\GetExerciseProperty{page}.% + } + {% + \noindent The solution of this exercise is on + page~\pageref{solution:\ExerciseID}.% + }% + \vspace{\baselineskip} + } + +\xsimsetup{ + exercise/template = tcolorbox , + solution/template = tcolorbox +} + +\usepackage{fmtcount,etoolbox} +\newrobustcmd*\mystringnum[2]{\csname#1stringnum\endcsname{#2}} +\renewcommand*\thechapter{\mystringnum{number}{\value{chapter}}} +\renewcommand*\thesection{\arabic{chapter}.\arabic{section}} + +% for the header: \MakeUppercase{\mystringnum{number}{1}} +% => \mystringnum{NUMBER}{1} +% => \NUMBERstringnum{1} +% elsewhere: \mystringnum{number}{1} +% => \numberstringnum{1} + +\usepackage{totcount} +\regtotcounter{chapter} + +\newcounter{chapters} +\setcounter{chapters}{1} +\newcommand*\printsolutionsperchapter{% + \whileboolexpr + { test { \ifnumless {\value{chapters}} {\totvalue{chapter}+1} } } + {% + \printsolutions[chapter=\value{chapters},headings-template=per-chapter] + \stepcounter{chapters}% + }% +} + +\begin{document} + +\chapter{The First Chapter} + +\begin{exercise} + Compute the derivative of the following function: + \begin{equation*} + f(x) = \sin((\sin x)^2) + \end{equation*} +\end{exercise} +\begin{solution} + The derivative is: + \begin{align*} + f’(x) &= ( \sin((\sin x)^2) )' + = \cos((\sin x)^2) \cdot 2\sin x \cos x + \end{align*} +\end{solution} + +\begin{exercise} + Compute the derivative of the following function: + \begin{equation*} + f(x) = \sin((\sin x)^2) + \end{equation*} +\end{exercise} +\begin{solution} + The derivative is: + \begin{align*} + f’(x) &= ( \sin((\sin x)^2) )' + = \cos((\sin x)^2) \cdot 2\sin x \cos x + \end{align*} +\end{solution} + +\chapter{The Second Chapter} + +\begin{exercise} + Compute the derivative of the following function: + \begin{equation*} + f(x) = (x^2+1) \sqrt{x^4+1} + \end{equation*} +\end{exercise} +\begin{solution} + The derivative is: + \begin{align*} + f’(x) &= ( (x^2+1) \sqrt{x^4+1} )' + = 2x\sqrt{x^4+1} + \frac{2x^3(x^2+1)}{\sqrt{x^4+1}} + \end{align*} +\end{solution} + +\clearpage +\section{Solutions of the Exercices} + +\printsolutionsperchapter + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.pdf Binary files differnew file mode 100644 index 00000000000..6aa9ab572bb --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.tex new file mode 100644 index 00000000000..b62b85127a4 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369065.tex @@ -0,0 +1,77 @@ +% https://tex.stackexchange.com/q/369065/ +\documentclass{article} +\usepackage{xsim,tcolorbox,needspace} + +\xsimsetup{ + exercise/within=section , + exercise/the-counter = \thesection.\arabic{exercise} , + exercise/template=cyan-box , + exercise/name=Example , + solution/template=red , + solution/print=true +} + +\DeclareExerciseEnvironmentTemplate{cyan-box} + {% + \begin{tcolorbox}[arc=0mm,boxrule=1pt,colback=white,colframe=cyan,leftrule=3mm] + \textsf{% + \MakeUppercase{% + \XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}% + }% + }% + \GetExercisePropertyT{subtitle}{ \textit{#1}}% + \quad + } + {\end{tcolorbox}} + +\DeclareExerciseEnvironmentTemplate{red} + {% + \par + \Needspace*{2\baselineskip} + \noindent + \textsf{\textcolor{red}{\MakeUppercase{\XSIMmixedcase{\GetExerciseName}}}}% + \quad + } + {\par\bigskip} + +\begin{document} + +\section{My first set of exercises} +\begin{exercise} + Prove that $\frac{1}{2}\Delta(f_{ij}f^{ij}) + =\nabla^{k}f^{ij}+f^{ij}f^{k}[2\nabla_{i}R_{jk}-\nabla_{k}R_{ij}]$ +\end{exercise} +\begin{solution} + From \dots +\end{solution} + +\begin{exercise} + Prove that Paulinho is smart. +\end{exercise} +\begin{solution} + All ducks are smart. Paulinho is a duck. Therefore, Paulinho is smart. +\end{solution} + +\begin{exercise} + Prove that Paulinho is smart. +\end{exercise} +\begin{solution} + All ducks are smart. Paulinho is a duck. Therefore, Paulinho is smart. +\end{solution} + +\section{My second set of exercises} +\begin{exercise} + Prove that Paulinho is smart. +\end{exercise} +\begin{solution} + All ducks are smart. Paulinho is a duck. Therefore, Paulinho is smart. +\end{solution} + +\begin{exercise} + Prove that Paulinho is smart. +\end{exercise} +\begin{solution} + All ducks are smart. Paulinho is a duck. Therefore, Paulinho is smart. +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.pdf Binary files differnew file mode 100644 index 00000000000..2bc106f3035 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.tex new file mode 100644 index 00000000000..e13b8653f4c --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369636.tex @@ -0,0 +1,46 @@ +% https://tex.stackexchange.com/q/369686/ +\documentclass[a4paper,11pt]{article} +\usepackage[top=2cm, bottom=3cm, left=4cm, right=4cm]{geometry} + +\usepackage[T1]{fontenc} +\usepackage{fourier} +\usepackage{tgpagella} +\usepackage[utf8]{inputenc} + +\usepackage{xsim,needspace,adjustbox,scrextend} + +\xsimsetup{ + exercise/the-counter = \arabic{exercise}. , + exercise/template = square +} + +\DeclareExerciseEnvironmentTemplate{square} + {% + \Needspace*{2\baselineskip}% + \addmargin[0pt]{.15\textwidth}% + \par\noindent + \adjustbox{ + fbox = 1pt 0pt, + lap = {\textwidth}, + valign = t, + set vsize = {0pt}{0pt} + }{\rule{0pt}{20pt}\hspace{20pt}}% + \textbf{\GetExerciseProperty{counter}} % + } + {\endaddmargin\vspace{\baselineskip}} + +\usepackage{lipsum} + +\begin{document} + +\noindent\hrulefill + +\begin{exercise} + \lipsum[1] +\end{exercise} + +\begin{exercise} + \lipsum[2] +\end{exercise} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.pdf Binary files differnew file mode 100644 index 00000000000..73eab39f10b --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.tex new file mode 100644 index 00000000000..58b6800f937 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texsx-369803.tex @@ -0,0 +1,50 @@ +% https://tex.stackexchange.com/q/369803 +\documentclass[a4paper,parskip=half]{scrartcl} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{amsmath} +\usepackage{amsthm} +\usepackage{amsfonts} +\usepackage{amssymb} + +\usepackage[left=2cm,right=2.5cm,top=2.5cm,bottom=2cm]{geometry} + +\usepackage{xsim,siunitx} +\DeclareExerciseTagging{difficulty} +\DeclareExerciseEnvironmentTemplate{custom} + {% + \subsection* + {% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfInsideSolutionF + {% + \IfExercisePropertySetT{subtitle} + { {\normalfont(\GetExerciseProperty{subtitle})}}% + }% + }% + }{} + +\xsimsetup{ + exercise/name = \XSIMtranslate{question} , + exercise/template=custom , + solution/print=true +} + +\begin{document} + +\begin{exercise}[ID=wdsw, subtitle = Widerstandswürfel , difficulty = 2] + Gegeben ist ein Würfel, wobei jede der Kanten einen Widerstand von $R = + \SI{1}{\ohm}$ hat. + + Wie groß ist der Widerstand entlang einer Raumdiagonale? +\end{exercise} +\begin{solution} + Wir wollen den Widerstand zwischen den Punkten $X$ und $Y$ bestimmen, also + entlang der Raumdiagonale (siehe Abb. \ref{fig:wdsws1}). Weil die + Raumdiagonale eine Symmetrieachse ist, sollte das Problem symmetrisch sein, + und deswegen eine recht einfache Lösung haben. +\end{solution} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.pdf Binary files differnew file mode 100644 index 00000000000..3dc9fb16494 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.tex new file mode 100644 index 00000000000..1f3fcfefcb7 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-15093.tex @@ -0,0 +1,133 @@ +% http://texwelt.de/wissen/fragen/15093/ +\documentclass[paper=a4]{scrartcl} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{xsim,needspace} + +\DeclareExerciseTagging{AFB} +\DeclareExerciseEnvironmentTemplate{myexam} + { + \par\vspace{\baselineskip} + \Needspace*{3\baselineskip} + \noindent + \textbf{\IfInsideSolutionTF{Lösung}{Aufgabe}~\GetExerciseProperty{counter}.}% + \GetExercisePropertyT{subtitle}{\quad\textit{#1}}% + \hfill + \GetExercisePropertyT{AFB}{Schwierigkeit: #1}% + \GetExercisePropertyT{points}{% + \marginpar{% + \PropertyValue + \GetExercisePropertyT{bonus-points}{+\PropertyValue}% + \,P.% + }% + }% + \par\noindent + } + {} + +\xsimsetup{exercise/template=myexam} + +\begin{document} + +\begin{exercise}[subtitle=Eine Frage, AFB=1, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[AFB=2, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[AFB=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[subtitle=Eine andere Frage, AFB=4, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[subtitle=Eine Frage, AFB=2] + Das ist eine sehr tolle Frage. +\end{exercise} + +\end{document} + +% andere Idee: +\documentclass[paper=a4]{scrartcl} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{xsim} + +\DeclareExerciseTagging{AFB} + +\DeclareExerciseEnvironmentTemplate{AFB}{% + \subsection*{% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfExercisePropertySetT{subtitle}% + { {\normalfont\itshape\GetExerciseProperty{subtitle}}}% + } + \marginpar{% + \GetExercisePropertyT{AFB}{% + \leavevmode\llap{Schwierigkeit: \PropertyValue\hspace*{\marginparsep}}% + }% + \GetExercisePropertyT{points}{% + \PropertyValue + \nobreakspace\XSIMtranslate{points}% + }% + }% +}{} + +\DeclareExerciseEnvironmentTemplate{AFBsol}{% + \subsection*{% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfExercisePropertySetT{subtitle}% + { {\normalfont\itshape\GetExerciseProperty{subtitle}}}% + } + \textit{\small + \GetExercisePropertyT{AFB}{Schwierigkeit: \PropertyValue}% + \GetExercisePropertyT{points}{% + \IfExercisePropertySetT{AFB}{ }% + (\PropertyValue\nobreakspace\XSIMtranslate{points})% + }% + }% + \par\noindent +}{} + +\DeclareExerciseTranslation{German}{default-heading}{Lösungen} + +\xsimsetup{ + exercise/template=AFB , + solution/template=AFBsol , + exercise/name=Aufgabe +} + +\begin{document} + +\begin{exercise}[subtitle=Eine Frage, AFB=1, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} +\begin{solution} + Das ist eine tolle Lösung! +\end{solution} +\begin{exercise}[AFB=2, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[AFB=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[subtitle=Eine andere Frage, AFB=4, points=3] + Das ist eine sehr tolle Frage. +\end{exercise} + +\begin{exercise}[subtitle=Eine Frage, AFB=2] + Das ist eine sehr tolle Frage. +\end{exercise} + +\printsolutions + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.pdf Binary files differnew file mode 100644 index 00000000000..000663bf445 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.tex new file mode 100644 index 00000000000..9e388b9f690 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.texwelt-6698.tex @@ -0,0 +1,86 @@ +% http://texwelt.de/wissen/fragen/6698/ +\documentclass{article} +\usepackage[utf8]{inputenc} +\usepackage[ngerman]{babel} + +\usepackage{needspace} +\usepackage{xsim} +\xsimsetup{ + exercise/name = Aufgabe , + solution/name = Lösung , + exercise/within = section , + exercise/the-counter = \thesection.\arabic{exercise} , + exercise/template = mine +} + +\newif\iflist + +\DeclareExerciseEnvironmentTemplate{mine}{ + \par\vspace{\baselineskip} + \Needspace*{3\baselineskip} + \noindent + \textbf{\GetExerciseName~\GetExerciseProperty{counter}}% + \GetExercisePropertyT{subtitle}{\quad\textit{#1}}% + \iflist + \GetExercisePropertyT{page}{ (Seite~#1)}% + \fi + % not necessary if you don't use points: + \GetExercisePropertyT{points}{% + \marginpar{% + \PropertyValue + \GetExercisePropertyT{bonus-points}{+\PropertyValue}% + \,\XSIMtranslate{points-abbr}% + }% + }% + \par\noindent +} +{} + +\usepackage{multicol} + +\begin{document} + +\section{Erstes Kapitel} +\begin{exercise} + Eine erste Aufgabe +\end{exercise} +\begin{exercise} + Eine zweite Aufgabe +\end{exercise} + +\subsection{Erstes Unterkapitel} +\begin{exercise} + Eine Aufgabe in einem Unterkapitel +\end{exercise} +\begin{exercise} + Noch eine Aufgabe in einem Unterkapitel +\end{exercise} + +\subsubsection{Tiefer geschachteltes Unterkapitel} +\begin{exercise} + Noch eine Aufgabe +\end{exercise} + +\subsubsection{Weiter geschachtelt} +\begin{exercise} + Eine weitere Aufgabe +\end{exercise} + +\subsection{Zweites Unterkapitel} +\begin{exercise} + Und eine weitere Aufgabe +\end{exercise} + +\clearpage + +\section{Zweites Kapitel} +\begin{exercise} + Eine Aufgabe in einem anderen Kapitel +\end{exercise} + +\begin{multicols}{2}[\section{Aufgabenübersicht}] + \listtrue + \printcollection{all exercises} +\end{multicols} + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.pdf b/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.pdf Binary files differnew file mode 100644 index 00000000000..b8f033c7599 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.tex b/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.tex new file mode 100644 index 00000000000..1b7b13f98b3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/examples/xsim.various.tex @@ -0,0 +1,237 @@ +\documentclass{article} +\usepackage{xsim,lipsum,tcolorbox} + +\DeclareExerciseType{question}{ + exercise-env = question , + solution-env = hint , + exercise-name = Question , + solution-name = Hint , + exercise-template = default , + solution-template = default , + counter = exercise % shares a counter with the `exercise' type +} + +\DeclareExerciseType{problem}{ + exercise-env = problem , + solution-env = answer , + exercise-name = Problem , + solution-name = Answer , + exercise-template = tcolorbox , + solution-template = tcolorbox +} + +\DeclareExerciseProperty{grade} +\DeclareExerciseProperty{difficulty} + +\tcbuselibrary{breakable} +\DeclareExerciseEnvironmentTemplate{tcolorbox} + {% + \newcommand*\writehere{% + \IfInsideSolutionTF{}{% + \tcblower + \emph{Your answer:} + \vspace*{4cm} + }% + } + \vspace{\baselineskip} + \tcolorbox[ + colback = red!5!white , + colframe = red!75!black , + colbacktitle = yellow!50!red , + coltitle = red!25!black , + fonttitle = \bfseries , + subtitle style = { + boxrule = 0.4pt , + colback = yellow!50!red!25!white + } , + breakable , + title = \GetExerciseName~\GetExerciseProperty{counter} + \IfExercisePropertySetT{points}{% + (\GetExerciseProperty{points} + \IfExerciseGoalSingularTF{points} + {\XSIMtranslate{point}} + {\XSIMtranslate{points}})% + }] + \IfInsideSolutionF{% + \IfExercisePropertySetT{tags}{% + Tags: \ListExerciseTags{tags}{, } \par + }% + }% + } + {% + \endtcolorbox + \vspace{\baselineskip} + } + +\xsimsetup{ + % tags = {geometry} , + % topics = {geometry} + % tags/ingore-untagged % if true untagged exercise will be printed regardless + % % which tags have been chosen +} + +\begin{document} + +\gradingtable \par \bigskip + +Total: \printtotalpoints \par +from questions: \printpoints{question} \par +from exercises: \printpoints{exercise} \par +from problems: \printpoints{problem} \par \bigskip + +Total bonus: \printtotalbonus \par +from questions: \printbonus{question} \par +from exercises: \printbonus{exercise} \par +from problems: \printbonus{problem} \par + +% 1 +\begin{exercise}[points=4,bonus-points=1,topics=geometry,tags={geometry,triangles},grade=7] + \lipsum[1] +\begin{verbatim} +foo x^2 y^3 \gna +\end{verbatim} +\end{exercise} +\begin{solution}[print] + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\begin{verbatim} +foo x^2 y^3 \gna +\end{verbatim} +\end{solution} + +% 2 +\begin{exercise}[subtitle=Foo,points=5,topics=analysis,tags={analysis,functions},grade=11] + \lipsum[2] +\end{exercise} +\begin{solution} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{solution} + +% 3 +\begin{problem}[tags={analysis,functions}] + \lipsum[3] + \writehere +\end{problem} +\begin{answer} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{answer} + +% 4 +\begin{question} + \lipsum[4] + + \verb+\ExerciseID+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} + + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} +\end{question} +\begin{hint} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{hint} + +% 5 +\begin{problem}[points=2] + \lipsum[3] + + \verb+\ExerciseID+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} + + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} + \writehere +\end{problem} +\begin{answer} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{answer} + +% 6 +\begin{problem}[points=1] + \lipsum[3] + + \verb+\ExerciseID+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} + + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} +\end{problem} +\begin{answer} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{answer} + +% 7 +\begin{exercise}[ID=test] + \lipsum[5] + + \verb+\ExerciseID+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} + + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} + + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} +\end{exercise} +\begin{solution} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{solution} + +% 8 +\begin{exercise}[print=false,use=false] + \lipsum[5] +\end{exercise} +\begin{solution} + This is the solution to \ExerciseType\ \GetExerciseProperty{counter}. +\end{solution} + +% \printsolutionstype{exercise} + +\printsolutions* + +\section{Statistics} + +\ForEachUsedExerciseByType{% + \noindent\XSIMmixedcase{\ExerciseParameterGet{#1}{exercise-name}}~#3: \\ + \hspace*{2em}id: #2, type: #1, subtitle: #4, points: #5, bonus: #6\par \medskip +} + +\bigskip + +\ForEachUsedExerciseByID{% + \noindent\XSIMmixedcase{\ExerciseParameterGet{#1}{exercise-name}}~#3: \\ + \hspace*{2em}id: #2, type: #1, subtitle: #4, points: #5, bonus: #6\par \medskip +} + +\bigskip + +\ForEachUsedExerciseByType{% + \ExercisePropertyIfSetT{#1}{#2}{points} + { \XSIMmixedcase{\ExerciseParameterGet{#1}{exercise-name}}~#3: #5~points\par }% +} + +\bigskip + +Number of questions: \numberofquestions \par +Number of exercises: \numberofexercises \par +Number of problems: \numberofproblems + +\section{Grading tables} + +\gradingtable[template=default*,type=exercise] \par \bigskip + +\gradingtable[template=default*,type=problem] \par \bigskip + +\gradingtable[template=default*] \par \bigskip + +% vertical +\gradingtable[type=exercise] \par \bigskip + +\gradingtable[type=problem] \par \bigskip + +\gradingtable + +\end{document} diff --git a/Master/texmf-dist/doc/latex/xsim/xsim.history b/Master/texmf-dist/doc/latex/xsim/xsim.history new file mode 100644 index 00000000000..895e7a47a3b --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/xsim.history @@ -0,0 +1,81 @@ +-------------------------------------------------------------------------- + +XSIM -- eXercise Sheets IMproved + +-------------------------------------------------------------------------- +Clemens Niederberger +Web: https://github.com/cgnieder/xsim +E-Mail: contact@mychemistry.eu +-------------------------------------------------------------------------- +Copyright 2017 Clemens Niederberger + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3 +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of LaTeX +version 2005/12/01 or later. + +This work has the LPPL maintenance status `maintained'. + +The Current Maintainer of this work is Clemens Niederberger. +-------------------------------------------------------------------------- + +HISTORY: + + v0.0 2017/02/09 - start with coding the first ideas + v0.1 2017/03/19 - first draft which actually seems to do everything as + planned + v0.2 2017/03/21 - bugfix in the verbwrite module + - add `use!' and `print!' properties + - add the concepts of `noupdate' and `boolean' properties + v0.4 2017/03/24 - \IfExerciseBooleanPropertyTF + - \GetExercisePropertyTF, \PropertyValue + - \printallsolutions + - \UseExerciseTemplate + - bug fix in solution environments: now get printed again + when option `print=true' is used + - bug fix to the translations of the solution list headings: + exercise name instead of exercise type is now printed + - \AddtoExerciseTypeGoal, \AddtoExerciseGoal + \AddtoExerciseTypeGoalPrint, \AddtoExerciseGoalPrint, + \ExerciseGoalValuePrint + - \addpoints, \addbonus, \points, \printgoal + v0.5 2017/03/30 - add style file mechanism + - make solution print conditions `section' and `chapter' + combinable + v0.5a 2017/04/15 - fix wrong translation of the `default-heading' + v0.5b 2017/04/16 - add \SetExerciseProperty + v0.6 2017/04/27 - official interface for grade distributions + - refine hook management (environment module) + v0.6a 2017/04/28 - refine \blank command, add documentation for said command + v0.7 2017/05/09 - \xsim_list_length:n + - new boolean property `used' + - when an exercise is collected the counter isn't stepped + but only when the exercise is inserted for the first + time; when this happens the new property `used' is set to + `true' + - make setting boolean properties case insensitive + - add missing pieces to manual (eg `page' property...) + - \TotalExerciseGoals and \TotalExerciseTypeGoals + - \XSIMifchapterTF + - \xsim_if_goal_sum:nnnTF and friends, + \IfExerciseTypeGoalsSumTF and \IfExerciseGoalsSumTF + - some more hints in the manual regarding collections + v0.8 2017/05/18 - bug fix in \xsim_set_property:nnnn + - random exercise lists from collections + - \xsim_collection_count:n + - \GetExerciseIdForProperty and \GetExerciseTypeForProperty + for unique properties + - set property `print=false' during collection and only to + true when the corresponding exercises actually are + printed + - do not insert \par at the beginning and end of exercises + and solutions; this should be left to the templates! + - new option `print-collection/print' which allows to + choose between exercises, solutions, and both to be + printed + - new parameter `solution-counter' in order to avoid + possible conflicts with existing counters + v0.8a 2017/05/19 - \IfPrintSolutionTF diff --git a/Master/texmf-dist/doc/latex/xsim/xsim.ideas b/Master/texmf-dist/doc/latex/xsim/xsim.ideas new file mode 100644 index 00000000000..bb43c7fec07 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/xsim.ideas @@ -0,0 +1,31 @@ +-------------------------------------------------------------------------- + +XSIM -- eXercise Sheets IMproved + +-------------------------------------------------------------------------- +Clemens Niederberger +Web: https://github.com/cgnieder/xsim +E-Mail: contact@mychemistry.eu +-------------------------------------------------------------------------- +Copyright 2017 Clemens Niederberger + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3 +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of LaTeX +version 2005/12/01 or later. + +This work has the LPPL maintenance status `maintained'. + +The Current Maintainer of this work is Clemens Niederberger. +-------------------------------------------------------------------------- + +IDEAS: + +- a document class `xsim-exam' for creating exams +- a mechanism for providing variants of an exam +- provide a switch: either write the environments to an external file + or save it to an auxiliary file ? (not really sure about this one -- + probably not) diff --git a/Master/texmf-dist/doc/latex/xsim/xsim_manual.pdf b/Master/texmf-dist/doc/latex/xsim/xsim_manual.pdf Binary files differnew file mode 100644 index 00000000000..3a0fa539656 --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/xsim_manual.pdf diff --git a/Master/texmf-dist/doc/latex/xsim/xsim_manual.tex b/Master/texmf-dist/doc/latex/xsim/xsim_manual.tex new file mode 100644 index 00000000000..2e351c7a64e --- /dev/null +++ b/Master/texmf-dist/doc/latex/xsim/xsim_manual.tex @@ -0,0 +1,2188 @@ +% !arara: pdflatex: { action: nonstopmode } +% !arara: biber +% arara: pdflatex: { action: nonstopmode } +% arara: pdflatex: { action: nonstopmode } +% arara: pdflatex: { action: nonstopmode } +% ---------------------------------------------------------------------------- +% the XSIM package +% +% eXercise Sheets IMproved +% +% ---------------------------------------------------------------------------- +% Clemens Niederberger +% Web: https://github.com/cgnieder/xsim +% E-Mail: contact@mychemistry.eu +% ---------------------------------------------------------------------------- +% Copyright 2017 Clemens Niederberger +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3 +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of LaTeX +% version 2005/12/01 or later. +% +% This work has the LPPL maintenance status `maintained'. +% +% The Current Maintainer of this work is Clemens Niederberger. +% ---------------------------------------------------------------------------- +% If you have any ideas, questions, suggestions or bugs to report, please +% feel free to contact me. +% ---------------------------------------------------------------------------- +\documentclass{xsim-manual} + +\usepackage{filecontents} +\begin{filecontents*}{\jobname.bib} +@online{texsx:romannumeral, + author = {Bruno Le Floch} , + title = {Cunning (La)TeX tricks} , + urldate = {2017-03-02} , + url = {http://tex.stackexchange.com/a/19769/} +} +@online{texsx:tagged/exsheets, + title = {Questions tagged `exsheets'} , + author = {various} , + url = {http://tex.stackexchange.com/questions/tagged/exsheets} , + urldate = {2017-05-15} +} +\end{filecontents*} +\addbibresource{\jobname.bib} + +\begin{document} + +\section{Licence, Requirements and \textsc{readme}} +\license + +\xsim\ loads the packages \pkg{expl3}~\cite{bnd:l3kernel}, +\pkg{xparse}~\cite{bnd:l3packages}, \pkg{etoolbox}~\cite{pkg:etoolbox}, +\pkg{array}~\cite{pkg:array} \pkg{booktabs}~\cite{pkg:booktabs} and +\pkg{translations}~\cite{pkg:translations}. All of these packages are present +on a modern and up to date \TeX\ distribution such as \TeX~Live or MiK\TeX\ so +no further action should be needed. When you are using \xsim\ you should be +using an up to date \TeX\ distribution, anyway. + +\begin{bewareofthedog} + Newer versions of \xsim\ may depend on newer versions of the support + packages. Remember: it is always dangerous to update single packages. + Always update your \TeX\ distribution if you want an up to date version of a + package. Be careful: if you're in the middle of an important project it + might be better to wait with the update until you've finished the project. + Every update might be breaking some things. +\end{bewareofthedog} + +\section{Motivation and Background} + +It has been quite a while since I first published +\pkg{exsheets}~\cite{pkg:exsheets} in June 2012. Since then it has gained a +user base and a little bit of popularity as the number of questions on tex.sx +shows (103~at the time of writing)~\cite{texsx:tagged/exsheets}. User +questions, bug reports and feature requests improved it over the time. It +still has a version number starting with a zero, though, which in my +versioning system means I still consider it experimental. + +This is due to several facts. It lacks a few features which I consider +essential for a full version~1. For one thing it is not possible to have +several kinds of exercises numbered independently. Using verbatim material +such as listings inside exercises and solutions is not possible and the +current workaround isn't that ideal either. One request which dates back +quite a while now was to have different types of points to exercises\ldots + +All of those aren't easy to add due to the way \pkg{exsheets} is implemented +right now. As a consequence I wanted to re-implement \pkg{exsheets} for a long +time. This is what lead to \xsim. Internally the package works completely +different. + +\begin{bewareofthedog} + \xsim\ will be the official successor of \pkg{exsheets} which is now + considered obsolete but will stay alive and will still receive bugfix + releases. However, new features will not be added to \pkg{exsheets} any + more. +\end{bewareofthedog} + +\section{How to Read the Manual}\label{sec:how-read-manual} + +\subsection{Nomenclature} + +Throughout this manual certain terms are used. This section explains their +meaning in this manual. + +\acuseall +\printacronyms[heading=none] + +\subsection{Package Options}\label{sec:package-options} +\xsim\ has these package options: +\begin{options} + \opt{verbose} + Writes extensive information about what \xsim\ is doing into the log + file. + \opt{final} + If used the exercise and solution environments will not rewrite the + environment body files. + \opt{clear-aux} + If used every time the total number of exercise changes \xsim\ will write + \emph{less} information to the auxfile on the next run and only if the + number of exercises stays stable between compilations the needed + information will be written to the auxfile. \emph{This needs more + compilations until everything stabilizes but should reduce the + probability of possibly faulty exercises after changes to the document.} + The \option{final} option automatically disables this option. See also + sections~\vref{sec:how-exerc-envir} and~\vref{sec:resolve-getting}. +\end{options} + +Those options are used the usual way as package option +\begin{sourcecode} + \usepackage[verbose]{xsim} +\end{sourcecode} +or as global option +\begin{sourcecode} + \documentclass[verbose]{article} +\end{sourcecode} +or via the setup command: +\begin{commands} + \command{xsimsetup}[\marg{options}] + Set up \xsim's package options and all other options described at + other places in the manual. +\end{commands} + +\subsection{Setting Options} +Apart from the package options already described in +section~\vref{sec:package-options} \xsim\ has further options. Those can be +\enquote{toplevel} options or options belonging to a module. +\begin{options} + \keyval*{toplevel}{value} + A toplevel option. + \keyval*{sublevel}{value}\Module*{module} + A sublevel option belonging to the module \module*{module} +\end{options} +Both kinds of options are set with \cs{xsimsetup}: +\begin{sourcecode} + \xsimsetup{ + toplevel = {value} , + module/sublevel = {value} + } +\end{sourcecode} + +\subsection{Command descriptions} + +Some commands do have a \expandablesymbol\ symbol printed next to their +names. This indicates that the command is expandable, \ie, it is usable in an +\cs*{edef} or \cs*{write} context and will expand according to its +description. All other commands are engine protected, \ie, in the sense of +\eTeX's \cs*{protected}. + +Some command name descriptions end with \code{\TF}. +\begin{commands} + \command*{SomeCommand\TF}[\meta{arguments}\marg{true}\marg{false}] + A command with maybe some arguments and ending with the two arguments + \meta{true} and \meta{false}. +\end{commands} +This means two things: the command is a conditional which tests something and +depending on the outcome of the test leaves either the \meta{true} argument +(\code{T}) or the \meta{false} argument (\code{F}) in the input stream. It +also means two additional commands exist: +\begin{commands} + \command*{SomeCommandT}[\meta{arguments}\marg{true}] + The same as \cs*{SomeCommandTF} but only with the \meta{true} argument and + no \meta{false} argument. + \command*{SomeCommandF}[\meta{arguments}\marg{false}] + The same as \cs*{SomeCommandTF} but only with the \meta{false} argument and + no \meta{true} argument. +\end{commands} + + +\section{Exercises and Solutions} + +The two predefined environments for exercises and solutions are the following +ones: +\begin{environments} + \environment{exercise}[\oarg{\acsp*{prop}}] + Input and typeset an exercise. See section~\vref{sec:exercise-properties} + for details on exercise \acsp*{prop}. + \environment{solution}[\oarg{options}] + Input and typeset the solution to the exercise of the previous + \env{exercise} environment. See section~\vref{sec:printing-solutions} for + details on options of solutions. +\end{environments} + +\begin{example} + \begin{exercise} + A first example for an exercise. + \end{exercise} + \begin{solution} + A first example for a solution. + \end{solution} +\end{example} + +As can be seen in the example a solution is not printed with the default +setup. This can be changed using the following option. +\begin{options} + \keybool{print}\Module{solution}\Default{false} + Set if solutions are printed or or not. +\end{options} + +The option (belonging to the module \module*{solution}) can either be set +locally as option to the \env{solution} environment +\begin{sourcecode} + \begin{solution}[print=true] + A first example for a solution. + \end{solution} +\end{sourcecode} +or with the setup command for all following solutions: +\begin{sourcecode} + \xsimsetup{ + solution/print = true + } +\end{sourcecode} + +There is an completely analoguous option for the \env{exercise} environment: +\begin{options} + \keybool{print}\Module{exercise}\Default{true} + Set if exercises are printed or or not. +\end{options} +More details on those two environments can be found in +section~\vref{sec:using-printing}. + +\section{How the Exercise Environments Work}\label{sec:how-exerc-envir} +Both enviroments write the contents of their bodies verbatim to external files +following a certain naming structure: +\begin{itemize} + \item + \code{\meta{jobname}-\meta{type}-\meta{id}-exercise|solution-body.tex} +\end{itemize} +The name starts with the name of the job (which is the name of the document +itself) followed by type and id of the corresponding exercise and then +followed by the environment type. For example both enviroments from the first +example have been written to files named +\begin{itemize} + \item \verbcode+xsim_manual-exercise-1-exercise-body.tex+ and + \item \verbcode+xsim_manual-exercise-1-solution-body.tex+, respectively. +\end{itemize} +Details on the \meta{type} of an exercise will be given in +section~\vref{sec:new-exercise-types}. \emph{The \meta{id} of an exercise is + a positive integer unique to each exercise environment regardless if the + exercise is being printed or used at all.} + +These external files are input when the respective exercise or solution is +printed. An advantage of using external files is that \emph{verbatim material + is allowed} inside the environments. Each of those files contains some +information about itself and where and why it was generated\footnote{In this + example the sourcecode line number is misleading as the example where the + file was generated itself was an external file where the \env{exercise} + environment indeed \emph{was} on line~1.}: + +\inputsourcecode{exercises/xsim_manual-exercise-1-exercise-body.tex} + +Arguably one downside of the approach using external files for each exercise +and its solution is that your project folder will be cluttered with files. In +order to deal with this somehow \xsim\ offers the following option: +\begin{options} + \keyval{path}{path name}\Default + With this option a subfolder or path within the main project folder can be + given. Exercises will be written to and included from this path. + \emph{The path must exist on your system before you can use it!} This + document uses \keyis{path}{exercises}. +\end{options} + +\begin{bewareofthedog} + \xsim\ writes a lot of stuff to the auxfile for re-using information on + subsequent compilations. If you add exercises, change properties \etc\ it + might happen that wrong information is staying in the auxfile and is wrongly + used by \xsim. In such cases deleting the auxfile and doing a few fresh + compilations may resolve your problems. + + Sometimes the \emph{existence of exercise or solution files from earlier + compilations} may lead to wrong lists of exercises or solutions. In such + cases it can be useful to delete all those files and doing a fresh + compilation. It may be helpful to use a subfolder for those exernal files + which will make deleting them a little bit easier. (Don't forget to both + create the subfolder and set \option{path} accordingly then.) + + Using the \option{clear-aux} option might help to reduce erroneous exercises. +\end{bewareofthedog} + +\section{New Exercise Types}\label{sec:new-exercise-types} + +It is easy to define new exercise environments together with a corresponding +solution environment using the following command: +\begin{commands} + \command{DeclareExerciseType}[\marg{type}\marg{parameters}] + Declare a new exercise type analoguous to the \env{exercise} and + \env{solution} environments. +\end{commands} +Declaring a new exercise type will also define a new command: +\begin{commands} + \command{numberof\meta{exercise-env}s} + These commands hold the absolut number of used exercises of type + \meta{type}. The meaning of \meta{exercise-env} will become clear below + when the exercise parameters are explained. It is always the same as the + exercise environment name. +\end{commands} +\begin{example} + There are \numberofexercises~exercises and \numberofproblems~problem in this + manual. +\end{example} +\xsim's pre-defined environment pair has been defined as follows: +\begin{sourcecode} + \DeclareExerciseType{exercise}{ + exercise-env = exercise , + solution-env = solution , + exercise-name = \XSIMtranslate{exercise} , + solution-name = \XSIMtranslate{solution} , + exercise-template = default , + solution-template = default + } +\end{sourcecode} + +The above already is an example for almost all parameters that can (and often +must) be set. Here is the complete list: +\begin{parameters} + \paraval{exercise-env}{exercise environment name} + The name for the environment used for the exercises of type \meta{type}. + \emph{This parameter is mandatory.} It can't be changed afterwards. + \paraval{solution-env}{solution environment name} + The name for the environment used for the solutions of type \meta{type}. + \emph{This parameter is mandatory.} It can't be changed afterwards. + \paraval{exercise-name}{exercise name} + The name of the exercises of type \meta{type} -- used for typesetting. + \emph{This parameter is mandatory.} + \paraval{solution-name}{solution name} + The name of the solutions of type \meta{type} -- used for typesetting. + \emph{This parameter is mandatory.} + \paraval{exercise-template}{exercise template} + The template used for typesetting the exercises of type \meta{type}. + \emph{This parameter is mandatory.} See + section~\vref{sec:styl-exerc-templ} for details on templates. + \paraval{solution-template}{solution template} + The template used for typesetting the exercises of type \meta{type}. + \emph{This parameter is mandatory.} See + section~\vref{sec:styl-exerc-templ} for details on templates. + \paraval{counter}{counter name} + The counter used for the exercises of type \meta{type}. If not explicitly + set the counter with the same name as \parameter{exercise-env} is used. + Otherwise the specified counter is used. This enables to have different + types of exercises sharing a common counter. \emph{This parameter can't + be changed afterwards.} If the explicit or implicit counter does not + exist, yet, it will be defined. + \paraval{solution-counter}{counter name} + The counter used for the solutions of type \meta{type}. If not explicitly + set the counter with the same name as \parameter{solution-env} is used. + Otherwise the specified counter is used. This enables to have different + types of solutions sharing a common counter although this doesn't actually + make much sense. But it can be useful to avoid using an already existing + counter. \emph{This parameter can't be changed afterwards.} If the + explicit or implicit counter does not exist, yet, it will be defined. The + sole purpose of this counter is to be able to label solutions so they can + be \cs*{pageref}ed. + \paraval{number}{integer} + An internal parameter that is used to keep track of the number of + exercises of a type. This parameter cannot be set or changed by the + user. +\end{parameters} + +It is possible to change some of the parameters after an exercise type has +been defined. Those include \parameter{exercise-name}, +\parameter{solution-name}, \parameter{exercise-template}, and +\parameter{solution-template}: +\begin{commands} + \command{SetExerciseParameter}[\marg{type}\marg{parameter}\marg{value}] + Usable to set a single parameter to a new value. + \command{SetExerciseParameters}[\marg{type}\marg{parameters}] + Set several parameters at once. \meta{parameters} is a csv list of + key/value pairs. +\end{commands} +If you try to set an already set but fixed parameter like +\parameter{exercise-env} a warning will be written to the log file. For all +parameters that can be changed also options exist wich can be set via +\cs{xsimsetup}. They are explained in +section~\vref{sec:environment-options-hooks}. + +\begin{bewareofthedog} + All exercises of a type use the parameters + (\eg, \parameter{exercise-template}) that are \emph{currently active}. If + you want exercises with a different look or different names in the same + document you should use different exercises types. +\end{bewareofthedog} + +\section{Exercise Properties}\label{sec:exercise-properties} + +\subsection{Predefined Properties} + +Exercise like the \env{exercise} environment and possibly others defined with +\cs{DeclareExerciseType} have a number of predefined \acsp*{prop}: +\begin{properties} + \propval{id}{integer} + Holds the internal id of an exercise. \emph{Cannot be set by the user}. + \propval{ID}{text} + Holds the user id of an exercise if defined. Otherwise it is equal to + \property{id}. + \propval{counter}{text} + Holds the counter value represenation of an exercise (\ie, what you + usually know as \cs*{the\meta{counter}}). \emph{Cannot be set by the + user}. + \propval{counter-value}{integer} + Holds the counter value of an exercise (\ie, what you usually know as + \cs*{arabic}\marg{counter}). \emph{Cannot be set by the user}. + \propval{subtitle}{text} + Holds the subtitle of an exercise. + \propval{points}{number} + Holds the reachable points of an exercise. + \propval{bonus-points}{number} + Holds the reachable bonus-points of an exercise. + \propbool{print} + Holds the print boolean of an exercise. + \propbool{print\bang} + Holds a special print boolean of an exercise, see + page~\pageref{property:print!}. + \propbool{use} + Holds the usage boolean of an exercise. + \propbool{use\bang} + Holds a special usage boolean of an exercise, see + page~\pageref{property:print!}. + \propbool{used} + True if an exercise has been used at least once. For an existing exercise + this is only false for exercises that have been collected + (\cf~section~\vref{sec:collecting-exercises}). + \propval{tags}{csv list of tags} + Holds the list of tags the exercise should be associated with. + \propval{topics}{csv list of topics} + Holds the list of topics the exercise should be associated with. + \propval{page}{text} + Holds the page counter value represenation of an exercise (\ie, what you + usually know as \cs*{thepage}). + \propval{page-value}{integer} + Holds the page counter value of an exercise (\ie, what you usually know as + \cs*{arabic}\Marg{page}). + \propval{section}{text} + Holds the section counter value represenation of an exercise (\ie, what + you usually know as \cs*{thesection}). + \propval{section-value}{integer} + Holds the section counter value of an exercise (\ie, what you usually know + as \cs*{arabic}\Marg{section}). + \propval{chapter}{text} + Holds the chapter counter value represenation of an exercise (\ie, what + you usually know as \cs*{thechapter}). \emph{Only if a command + \cs*{chapter} \emph{and} a counter \code{chapter} exist.} + \propval{chapter-value}{integer} + Holds the chapter counter value of an exercise (\ie, what you usually know + as \cs*{arabic}\Marg{chapter}). \emph{Only if a command \cs*{chapter} + \emph{and} a counter \code{chapter} exist.} +\end{properties} + +Some of these \acsp*{prop} are fixed and cannot be set by the user. Those +include \property{id}, \property{counter}, and \property{counter-value}. The +others can be set using the optional argument of the exercise environment. + +\begin{example} + \begin{exercise}[subtitle={This is a subtitle},points=4,bonus-points=1] + An exercise where some properties have been set. + \end{exercise} +\end{example} + +\subsection{Declaring Own Properties} + +\xsim\ offers the possibility to declare additional exercise properties: +\begin{commands} + \command{DeclareExerciseProperty}[\barg\sarg\narg\marg{property}] + Declares the property \meta{property}. + + If used with the optional \barg\ star a unique property is defined which + means that each exercise must have a property value distinct from all + other exercises (all means all -- \emph{independent from the exercise type}). + + If used with the optional \sarg\ a boolean property is defined which + means that it only should get the values \code{true} or \code{false} and + if used without value it gets the value \code{true} instead of an empty + value. If any other value is used the property is set to + \code{false}. A boolean option obviously cannot be unique. The optional + \sarg\ takes precedence over the optional \barg, \ie, if both are present + the property is boolean \emph{but not} unique. + + If used with the optional \narg\ a property is defined which won't get + updated through subsequent compilation runs but is only set when the + exercise is used. + \command{DeclareExercisePropertyAlias}[\marg{property 1}\marg{property 2}] + Declares \meta{property 1} to be an alias of \meta{property 2}. This + means that each time \meta{property 2} is set \meta{property 1} will be + set to the same value \emph{unless} it has been set already. As an + example: property \property{ID} is an alias of property \property{id}. +\end{commands} + +This is better demonstrated with an example: +\begin{example} + \begin{exercise} + \lipsum[4] % from package `lipsum' + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} \par + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} \par + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} + \end{exercise} + \begin{exercise}[ID=foo-bar] + \lipsum[4] + \verb+\GetExerciseProperty{id}+: \GetExerciseProperty{id} \par + \verb+\GetExerciseAliasProperty{ID}+: \GetExerciseAliasProperty{ID} \par + \verb+\GetExerciseProperty{ID}+: \GetExerciseProperty{ID} + \end{exercise} +\end{example} + +The power of properties will get more clear when reading +section~\vref{sec:styl-exerc-templ} about templates. + +\subsection{A Special Kind of Property: Exercise Goals}\label{sec:goals} + +Exercise goals are a generic concept in \xsim\ for exercise properties like +\property{points} or \property{bonus-points}. Those are properties which can +(only) get a decimal number as value the sum of which is calculated and +available (after a compilation) throughout the document. +\begin{commands} + \command{DeclareExerciseGoal}[\marg{goal}] + Declare a new exercise goal named \meta{goal} and also a property called + \meta{goal}. + \command{TotalExerciseTypeGoal}[\marg{type}\marg{goal}\marg{singular}\marg{plural}] + Get the sum of goal \meta{goal} for all exercises of type \meta{type}. + \meta{singular} and \meta{plural} are placed after the sum in the input + stream depending on whether the sum equals~$1$ or not. + \command{TotalExerciseTypeGoals}[\marg{type}\marg{list of + goals}\marg{singular}\marg{plural}] + Get the sum of goal all goals in \meta{list of goals} for all exercises of + type \meta{type}. The goal names in \meta{list of goals} must be + separated with \code{+}. \meta{singular} and \meta{plural} are placed + after the sum in the input stream depending on whether the sum equals~$1$ + or not. + \command{TotalExerciseGoal}[\marg{goal}\marg{singular}\marg{plural}] + Get the sum of goal \meta{goal} for all exercises. \meta{singular} and + \meta{plural} are placed after the sum in the input stream depending on + whether the sum equals~$1$ or not. + \command{TotalExerciseGoals}[\marg{list of + goals}\marg{singular}\marg{plural}] + Get the sum of goal all goals in \meta{list of goals} for all exercises. + The goal names in \meta{list of goals} must be separated with + \code{+}. \meta{singular} and \meta{plural} are placed after the sum in + the input stream depending on whether the sum equals~$1$ or not. + \command{AddtoExerciseTypeGoal}[\marg{type}\marg{goal}\marg{value}] + Adds \meta{value} to the goal \meta{goal} of exercise type \meta{type}. + \command{AddtoExerciseTypeGoalPrint}[\marg{type}\marg{goal}\marg{value}% + \marg{singular}\marg{plural}] + Adds \meta{value} to the goal \meta{goal} of exercise type \meta{type}. + The value and -- depending on wether the value equals $1$ or not -- + \meta{singular} or \meta{plural} are left in the input stream. + \command{AddtoExerciseGoal}[\marg{goal}\marg{value}] + Adds \meta{value} to the goal \meta{goal} of the current exercise + type. (To be used within exercises.) + \command{AddtoExerciseTypeGoalPrint}[\marg{goal}\marg{value}% + \marg{singular}\marg{plural}] + Adds \meta{value} to the goal \meta{goal} of the current exercise type. + The value and -- depending on wether the value equals $1$ or not -- + \meta{singular} or \meta{plural} are left in the input stream. (To be used + within exercises.) + \command{ExerciseGoalValuePrint}[\marg{value}\marg{singular}\marg{plural}] + Print \meta{value} and -- depending on wether the value equals $1$ or not -- + \meta{singular} or \meta{plural}. + \command{printgoal}[\marg{value}] + Print \meta{value} according to option \option{goal-print}. Defined in + terms of \cs{ExerciseGoalValuePrint}. + \command{printpoints}[\marg{type}] + Print the sum of points for all exercises of type \meta{type} followed by + an appropriate translation of the words \enquote{point} or + \enquote{points}, respectively\footnote{See section~\vref{sec:exerc-transl} + for details on the definition and usage of language dependent words.}. + Defined in terms of \cs{TotalExerciseTypeGoal}. + \command{printtotalpoints} + Print the sum of points for all exercises followed by an appropriate + translation of the words \enquote{point} or \enquote{points}, + respectively. Defined in terms of \cs{TotalExerciseGoal}. + \command{addpoints}[\sarg\marg{value}] + Adds \meta{value} to the points of the current exercise type. (To be used + within exercises.) Prints the value followed by an appropriate + translation of the words \enquote{point} or \enquote{points}, + respectively. The starred version prints nothing. Defined in terms of + \cs{AddtoExerciseGoal} and \cs{AddtoExerciseGoalPrint}. + \command{points}[\marg{value}] + Print \meta{value}followed by an appropriate translation of the words + \enquote{point} or \enquote{points}, respectively. Defined in terms of + \cs{ExerciseGoalValuePrint}. + \command{printbonus}[\marg{type}] + Print the sum of bonus points for all exercises of type \meta{type} + followed by an appropriate translation of the words \enquote{point} or + \enquote{points}, respectively. Defined in terms of + \cs{TotalExerciseTypeGoal}. + \command{printtotalbonus} + Print the sum of bonus points for all exercises followed by an appropriate + translation of the words \enquote{point} or \enquote{points}, + respectively. Defined in terms of \cs{TotalExerciseGoal}. + \command{addbonus}[\sarg\marg{value}] + Adds \meta{value} to the bonus points of the current exercise type. (To be + used within exercises.) Prints the value followed by an appropriate + translation of the words \enquote{point} or \enquote{points}, + respectively. The starred version prints nothing. Defined in terms of + \cs{AddtoExerciseGoal} and \cs{AddtoExerciseGoalPrint}. +\end{commands} + +The two existing goals are defined with +\begin{sourcecode} + \DeclareExerciseGoal{points} + \DeclareExerciseGoal{bonus-points} +\end{sourcecode} + +When goal values are printed the decimal number is fed to a function which can +be changed using the following option: +\begin{options} + \keyval{goal-print}{code}\Default{\#1} + How to format goal values. Use \code{\#1} to refer to the actual number. +\end{options} + +At last some examples for a custom command: let's say you want a command which +prints the complete sum for all exercises of all exercise types of both +\property{points} \emph{and} \property{bonus-points} added up: +\begin{sourcecode} + \NewDocumentCommand\printsumofpointsandbonus{}{% + \TotalExerciseGoals{points+bonus-points} + {\,\XSIMtranslate{point}} + {\,\XSIMtranslate{points}}% + } +\end{sourcecode} +Here is how you could mimick the command \cs*{totalpoints} from +\pkg{exsheets}: +\begin{sourcecode} + \NewDocumentCommand\pointsandbonus{}{% + \TotalExerciseGoal{points}{}{}% + \IfExerciseGoalsSumF{bonus-points}{=0} + {\,(+\,\TotalExerciseGoal{bonus-points}{}{})}% + \,\XSIMtranslate{points}% + } +\end{sourcecode} + + +\subsection{A Special Kind of Property: Exercise Tags}\label{sec:tags} + +Exercise tags are a generic concept in \xsim\ for exercise properties like +\property{tags} or \property{topics}. Those are properties which can (only) +get a csv list of strings as value. Those strings can be used to selectively +use exercises. See section~\vref{sec:using-printing} for details on +\emph{usage} of exercises and the difference to \emph{printing} an exercise +and how to use exercise tags for selection. +\begin{commands} + \command{DeclareExerciseTagging}[\marg{tag}] + This defines an exercise tagging group named \meta{tag}. It also defines a + property named \meta{tag}. In addition two options are defined: an option + named \code{\meta{tag}} which can be used for selection and an boolean + option \code{\meta{tag}/ignore-untagged}. +\end{commands} +The two existing tagging groups have been defined and preset with the +following code: +\begin{sourcecode} + \DeclareExerciseTagging{tags} + \DeclareExerciseTagging{topics} + \xsimsetup{tags/ingore-untagged=false} +\end{sourcecode} +This means that these options are available: +\begin{options} + \keyval{tags}{csv list of tags} + Choose the set of tags whose associated exercises should be printed. + \keyval{topics}{csv list of topics} + Choose the set of tags whose associated exercises should be printed. + \keybool{ignore-tagging}\Module{tags}\Default{false} + If set to true exercises with no tags will be printed even if tags have + been chosen with the option \option{tags}. + \keybool{ignore-tagging}\Module{topics}\Default{true} + If set to true exercises with no topics will be printed even if tags have + been chosen with the option \option{topics}. +\end{options} + +It may happen that you choose certain tags for printing and want one or two +exercises to be printed or used even if they don't match the tagging +criteria. For this reason two additional properties exist which can be set to +an exercise:\label{property:print!} +\begin{properties} + \propbool{print\bang} + If set to true the exercise will be printed (and thus used) regardless of + other conditions. + \propbool{use\bang} + If set to true the exercise will be used regardless of other conditions. +\end{properties} + +\section{Using and Printing an Exercise}\label{sec:using-printing} +\subsection{What the Environments do} + +When an exercise is started with \environ{exercise} (or other environments +defined through \cs{DeclareExerciseType}) then different things happen +depending on different settings: +\begin{itemize} + \item If the \emph{insert mode} is active nothing happens, see + section~\vref{sec:collecting-exercises} for details on this. + \item Else the id integer is incremented. + \item If the exercise is \emph{used} the corresponding counter is stepped + and the exercise is added to the \enquote{use list}. The properties + \property{counter} and \property{use} are updated accordingly. + \item If an exercise is \emph{printed} then it is also \emph{used}. An + exercise that isn't used cannot be printed. Being printed means two + things: being added to the \enquote{print list} and being typeset at the + position where the exercise is placed in the source file. If an exercise + is \emph{not printed but used} it means that the counter will be stepped. + This can be useful for creating an exercise sheet only containing the + solutions for some exercises. + \item If an exercise is printed certain hooks and template code is inserted + around the environment body. +\end{itemize} + +\begin{example} + \begin{exercise}[print=false] + This exercise will not be printed but the exercise counter will be + incremented nonetheless. Its solution will be printed in the list of + solutions. + \end{exercise} + \begin{solution} + The solution of the exercise that has not been printed. + \end{solution} +\end{example} + +The schematic structure of an exercise is shown in +figure~\vref{fig:schematic-structure}. + +\begin{figure} + \centering + \begin{tikzpicture} + \node[draw,minimum width=.7\linewidth] at (0,0) {pre hook}; + \node[draw,minimum width=.7\linewidth] at (0,-1) {begin template code}; + \node[draw,minimum width=.7\linewidth] at (0,-2) {begin hook}; + \node[draw,minimum width=.7\linewidth] at (0,-3) {environment body}; + \node[draw,minimum width=.7\linewidth] at (0,-4) {end hook}; + \node[draw,minimum width=.7\linewidth] at (0,-5) {end template code}; + \node[draw,minimum width=.7\linewidth] at (0,-6) {post hook}; + \end{tikzpicture} + \caption{Schematic structure of an exercise or solution.}\label{fig:schematic-structure} +\end{figure} + +\subsection{Environment Options \& Hooks}\label{sec:environment-options-hooks} + +For each exercise type there are the following options for both environments, +the environments' names are the module names for the options (here using the +\enquote{exercise} type): +\begin{options} + \keybool{print}\Module{exercise}\Default{true} + Determines if exercises of type \enquote{exercise} are printed. + \keybool{use}\Module{exercise}\Default{true} + Determines if exercises of type \enquote{exercise} are used. + \keyval{within}{counter}\Module{exercise}\Default + Adds the exercise counter to the reset list of the counter + \meta{counter}. \emph{Beware that if the counter is a shared counter + this will affect \emph{all objects} using this counter!} + \keyval{the-counter}{code}\Module{exercise} + An interface for redefining the counter representation command + \cs*{the\meta{counter}}. + \keyval{template}{template}\Module{exercise} + An interface for \cs{SetExerciseParameter}\Marg{exercise}% + \Marg{exercise-template}\marg{template}. + \keyval{template}{template}\Module{solution} + An interface for \cs{SetExerciseParameter}\Marg{exercise}% + \Marg{solution-template}\marg{template}. + \keyval{name}{name}\Module{exercise} + An interface for \cs{SetExerciseParameter}\Marg{exercise}% + \Marg{exercise-name}\marg{name}. + \keyval{name}{name}\Module{solution} + An interface for \cs{SetExerciseParameter}\Marg{exercise}% + \Marg{solution-name}\marg{name}. + \keyval{pre-hook}{code}\Module{exercise}\Default + The code for the \emph{pre exercise hook} for exercises of the type + \enquote{exercise}. + \keyval{begin-hook}{code}\Module{exercise}\Default + The code for the \emph{begin exercise hook} for exercises of the type + \enquote{exercise}. + \keyval{end-hook}{code}\Module{exercise}\Default + The code for the \emph{end exercise hook} for exercises of the type + \enquote{exercise}. + \keyval{post-hook}{code}\Module{exercise}\Default + The code for the \emph{post exercise hook} for exercises of the type + \enquote{exercise}. + \keybool{print}\Module{solution}\Default{false} + Determines if solutions of type \enquote{exercise} are printed. + \keyval{pre-hook}{code}\Module{solution}\Default + The code for the \emph{pre solution hook} for solutions of the type + \enquote{exercise}. + \keyval{begin-hook}{code}\Module{solution}\Default + The code for the \emph{begin solution hook} for solutions of the type + \enquote{exercise}. + \keyval{end-hook}{code}\Module{solution}\Default + The code for the \emph{end solution hook} for solutions of the type + \enquote{exercise}. + \keyval{post-hook}{code}\Module{solution}\Default + The code for the \emph{post solution hook} for solutions of the type + \enquote{exercise}. + % TODO +\end{options} + +\subsection{(Re-) Inserting a Certain Exercise} +If you know type and \property{id} of an exercise you can (re-)insert every +existing exercise, \ie, every exercise whose external file exists. +\begin{commands} + \command{printexercise}[\marg{type}\marg{id}] + Inserts the exercise of type \meta{type} with the \property{id} + \meta{id}. +\end{commands} +\begin{example} + \printexercise{exercise}{5} +\end{example} + +\section{Collecting Exercises}\label{sec:collecting-exercises} + +\subsection{Background} +\xsim\ knows the concept of \enquote{exercise collections}. A collection of +exercises can be useful when you want to print a certain group of exercises +several times. Each collection must have a unique name with which you can +refer to the corresponding collection. A collection is realized by declaring +the collection and by surrounding the exercises belonging to the collection +with a certain pair of commands (this is explained in the next section). + +Let's say you have several files of math exercises where one only contains +geometry exercises and another only calculus exercises and so on. Surrounding +the \cs*{input} of each file with said pair of commands for a certain +collection all exercises of the corresponding file now are a collection which +then can be printed at once whereever you want the collection of exercises to +be printed. By choosing certain tags (see section~\vref{sec:tags}) inside +each collection you could even cherry-pick exercises from the external file. + +\subsection{Usage} +\emph{A collection must be declared in the preamble.} Using a pair of +commands explained below exercises between those commands are added to the +corresponding collection but not printed. After a collection is completed the +collection can be printed as often as needed. +\begin{commands} + \command{DeclareExerciseCollection}[\marg{collection name}] + Define a new collection \meta{collection name} in the document preamble. + \command{collectexercisestype}[\marg{collection name}\marg{exercise type}] + Opens the collection \meta{collection name} which now collects all + exercises of type \meta{exercise type} until the collection is closed with + \cs{collectexercisesstop}. Collections of other types are not + collected\footnote{This command starts a group with + \cs*{begingroup}!}. + \command{collectexercises}[\marg{collection name}] + Opens the collection \meta{collection name} which now collects all + exercises until the collection is closed with + \cs{collectexercisesstop}\footnote{This command starts a group with + \cs*{begingroup}!}. + \command{collectexercisesstop}[\marg{collection name}] + Closes the collection \meta{collection name}\footnote{This command ends + a group with \cs*{endgroup}!}. + \command{printcollection}[\oarg{options}\marg{collection name}] + Prints the collection \meta{collection name}, \ie, all exercises collected + earlier. This command cannot be used before the corresponding collection + has been closed correctly. +\end{commands} + +Valid options are the following: +\begin{options} + \keybool{headings}\Module{print-collection}\Default{false} + If true a heading for each exercise type is inserted. + \keyval{headings-template}{template}\Module{print-collection}\Default{collection} + The heading template used when \keyis{headings}{true}. + \keychoice{print}{exercises,solutions,both}\Module{print-collection}\Default{exercises} + Determines wether \cs{printcollection} prints the exercises or the + solutions of the collection. When you choose \code{both} exercises and + solutions are printed alternately. +\end{options} + +Those options can also be set via \cs{xsimsetup} using the module +\module{print-collection}. + +\begin{bewareofthedog} + Please be aware that exercises are not used or printed while they are + collected. Nonetheless the property \property{use} is set to \code{true} + (so that solutions can be printed even if the exercises are not) and the + property \property{print} is set to \code{false}. Also their counters are + \emph{not stepped} during the process. This only happens when they are + printed the first time, \cf~the \property{used} property. At that time + also the properties \property{page}, \property{section} and + \property{chapter} are set and the property \property{print} is set to + \code{true}. +\end{bewareofthedog} + +The usage should be clear: +\begin{example} + \collectexercises{foo} + \begin{exercise} + This exercise is added to the collection `foo'. + \end{exercise} + \begin{exercise} + This exercise is also added to the collection `foo'. + \end{exercise} + \begin{exercise} + So is this. + \end{exercise} + \begin{exercise} + As well as this one. + \end{exercise} + \collectexercisesstop{foo} +\end{example} +Once the collection is closed it can be printed: +\begin{example} + \printcollection{foo} +\end{example} + +You can open several collections at the same time: +\begin{sourcecode} + \collectexercises{foo} + ... + \collectexercisestype{bar}{exercises} + ... + \collectexercisesstop{bar} + ... + \collectexercisesstop{foo} +\end{sourcecode} +Exercises will be added to each open collection. + +There is one generic collection called \enquote{\code{all exercises}}. As the +name already suggests it will hold all exercises. So if you say +\begin{sourcecode} + \printcollection{all exercises} +\end{sourcecode} +all exercises will be printed. + +\begin{bewareofthedog} + If you use \cs*{label}s inside of exercises and you print exercises more + than once in your document (by reusing a collection for example) you will + get +\begin{sourcecode} + LaTeX Warning: There were multiply-defined labels. +\end{sourcecode} + Equally if you have environments like \environ{equation} which step a + counter inside an exercise or solution the counter will be stepped each time + the exercise is used. +\end{bewareofthedog} + +At last now an example using external files, collections and tags: +\begin{sourcecode} + % preamble: + % \DeclareExerciseCollection{foo-easy} + % \DeclareExerciseCollection{foo-medium} + % \DeclareExerciseTagging{difficulty} + + % document: + \collectexercises{foo-easy} + \xsimsetup{difficulty=easy} + \input{foo.tex} + \collectexercisesstop{foo-easy} + % collection `foo-easy' now contains all exercises of file `foo.tex' tagged + % with `difficulty=easy' + + \collectexercises{foo-medium} + \xsimsetup{difficulty=medium} + \input{foo.tex} + \collectexercisesstop{foo-medium} + % collection `foo-medium' now contains all exercises of file `foo.tex' + % tagged with `difficulty=medium' +\end{sourcecode} + +\begin{bewareofthedog} + The recommended usage is similar to the last example. Actually a collection + can be printed \emph{before} it is opened, too. (This needs \emph{at least} + two compilations, though.) However, it is safer printing a collection only + once and only \emph{after it has been collected}. No guaranties are given + that properties are set correctly if you use the collection before. You + usually also will make sure that the exercises in a collection are unique, + \ie, that an exercises is not part of several collections -- at least not if + both collections are printed in the same document. +\end{bewareofthedog} + +\section{Printing Random Exercises From a Collection} +\xsim\ provides the possibility of selecting random exercises from a +collection (\cf~section~\vref{sec:collecting-exercises}). +\begin{commands} + \command{printrandomexercises}[\oarg{options}\marg{number}] + This command prints \meta{number} random exercises from the collection + chosen with option \option{collection}, see below. When this command is + used it generates a random list of integers which is written to the + \code{aux} file. On the subsequent compilations the according exercises + are printed. \emph{If you want to regenerate the random list you have to + delete the \code{aux} file before compiling.} +\end{commands} +Valid options for this command are: +\begin{options} + \keybool{sort}\Module{random}\Default{true} + Determines wether the random chosen exercises should be sorted according + to their order of definition in the collection or not. + \keyval{collection}{collection}\Module{random}\Default{all exercises} + The collection from which the exercises are to be chosen from. + \keyval{exclude}{csv list of ids}\Module{random} + A list of \property{id}s or \property{ID}s of exercises \emph{not} to be + chosen. + \keychoice{print}{exercises,solutions,both}\Module{random}\Default{exercises} + Determines wether \cs{printrandomexercises} prints the exercises or the + solutions. When you choose \code{both} exercises and solutions are + printed alternately. +\end{options} + +\begin{example} + \printrandomexercises[collection=foo]{2} +\end{example} + +The example above of course doesn't make much sense but if have a collection +which collects exercises from an external file and the exercise haven't been +printed in the document before then you will get a list of subsequently +numbered exercises. + +\section{Printing Solutions}\label{sec:printing-solutions} + +There are different commands for printing the solutions to exercises: +\begin{commands} + \command{printsolutionstype}[\sarg\oarg{options}\marg{exercise type}] + Prints the solutions of all used exercises of type \meta{exercise type}. + The starred version only prints the solutions of all printed exercises of + type \meta{exercise type}. + \command{printsolutions}[\sarg\oarg{options}] + Prints the solutions of all used exercises of all types ordered by type. + The starred version only prints the solutions of all printed exercises of + all types. + \command{printallsolutions}[\sarg\oarg{options}] + Prints the solutions of all used exercises of all types ordered by + appearance in the document. The starred version only prints the solutions + of all printed exercises of all types. + \command{printsolution}[\oarg{options}\marg{type}\marg{id}] + Prints the solution of the exercise of type \meta{type} with the + \property{id} \meta{id}. +\end{commands} + +\begin{example} + \printsolutionstype{exercise} +\end{example} + +The options can be diveded into two groups. The ones in the first group +modify the layout. +\begin{options} + \keybool{headings}\Default{true} + If true a heading for each exercise type is inserted. + \keyval{headings-template}{template}\Default{default} + The heading template used when \keyis{headings}{true}. +\end{options} + +The ones in the second group set conditions selecting which solutions are +printed. If you combine those conditions a solution is printed if it meets +either of the conditions. +\begin{options} + \keychoice{section}{\default{true},false,\meta{integer}}\Default{false} + If you set \keyis{section}{true} only solutions of exercises of the + current section are printed. If you set \keyis{section}{4} only solutions + of exercises in a section with number~$4$ are printed. + \keychoice{chapter}{\default{true},false,\meta{integer}}\Default{false} + If you set \keyis{chapter}{true} only solutions of exercises of the + current chapter are printed. If you set \keyis{chapter}{4} only solutions + of exercises in a chapter with number~$4$ are printed. + \keychoice{collection}{false,\meta{collection name}}\Default{false} + If used only solutions of exercises belonging to collection + \meta{collection name} are printed. +\end{options} + +The conditions can be combined. The following call will only print solutions +from exercises in section~3 of chapter~2: +\begin{sourcecode} + \printsolutions[chapter=2,section=3] +\end{sourcecode} + +\begin{bewareofthedog} + The selection per section or per chapter relies on the \emph{counter + numbers} of the sections or chapters, respectively. This means if section + numbers are reset (\eg\ by \cs*{chapter} or \cs*{appendix}) and you have + exercises from \emph{different} sections with \emph{the same section number} + the solutions of \emph{all those exercises} will be printed. This means you + only should use the \option{section} selection when section are the top + document level headings (apart from parts) and you have no exercises in the + appendix. Similar considerations are valid for the \option{chapter} + selection. +\end{bewareofthedog} + +All options can also be set via \cs{xsimsetup} using the module +\module{print-solutions}. + +\begin{example} + \printsolutions[section=4,headings-template=per-section] +\end{example} + +\begin{example} + \printsolution{exercise}{5} +\end{example} + +\section{Grading Tables}\label{sec:grading-tables} +When you create exercises it may not only be desirable to be able to add +points and bonus-points to a question (see section~\vref{sec:goals} about +exercise goals) but also to be able to output a grading table. \xsim\ has +built-in means for this. +\begin{commands} + \command{gradingtable}[\oarg{options}] + Print a grading table. +\end{commands} +Valid options for this command are +\begin{options} + \keyval{template}{template}\Default{default} + Choose the template used for the grading table. + \keyval{type}{exercise type}\Default + Choose the exercise type for which the table is printed. +\end{options} +Both option defaults can be changed with \cs{xsimsetup} setting the options +using \module{grading-table}: +\begin{sourcecode} + \xsimsetup{ + grading-table/template = default* + } +\end{sourcecode} + +An example: +\begin{example} + \gradingtable[type=exercise] +\end{example} + +Or using the \enquote{\code{default*}} template: +\begin{example} + \gradingtable[template=default*,type=exercise] +\end{example} + +Available templates and how to define new ones are explained in +sections~\vref{sec:grad-table-templ} and~\vref{sec:template-examples}. \xsim\ +per default provides two templates \enquote{\code{default}} and +\enquote{\code{default*}}, the first one has a vertical layout, the second a +horizontal layout. Both templates can be used per type like in the examples +above or for all types at once by leaving the specification \option{type} +away: +\begin{example} + \gradingtable +\end{example} + +\section{Styling the Exercises -- Templates}\label{sec:styl-exerc-templ} + +\subsection{Background} +Whenever \xsim\ outputs something to be typeset it uses so-called templates +for the task. \xsim\ knows of three different kinds of templates: +\begin{itemize} + \item environment templates (see section~\vref{sec:envir-templ}), + \item heading templates (see section~\vref{sec:heading-templates}) and + \item grading table templates (see section~\vref{sec:grad-table-templ}) +\end{itemize} + +The most important one for the styling of the exercises are the environment +templates. Those templates give you complete control over the look and +arrangement of an exercise. To be able to do this \xsim\ provides a large +number of commands which can be used only inside template +definitions\footnote{The last sentence is wrong: those commands can be used + anywhere but most of them only give useful results inside of templates.}. +Those commands are explained in the next section. Their usage will hopefully +become clear in the examples in section~\vref{sec:template-examples}. Having +full control over the layout comes at a price: you need to be able to program +yourself in order to achieve certain layouts\footnote{I plan to incorporate + the most common layouts -- and maybe some fancy ones, too -- in the examples + section~\vref{sec:template-examples} but at the time of writing this is still + up in the air.}. + +\subsection{Commands for Usage in Template Definitions} +\subsubsection{Goals} +\begin{commands} + \command{IfExerciseGoal\TF}[\marg{goal}\marg{relation and + value}\marg{true}\marg{false}] + Checks the sum of goal \meta{goal} against \meta{relation and value}. + \command{IfExerciseGoalSingular\TF}[\marg{goal}\marg{true}\marg{false}] + Checks if the value of the goal \meta{goal} of the current exercise + equals~$1$. This is the same as \\ + \cs{IfExerciseGoalTF}\marg{goal}\Marg{=1}\marg{true}\marg{false}. + \command{IfExerciseTypeGoalsSum\TF}[\marg{type}\marg{list of + goals}\marg{relation and value}\marg{true}\marg{false}] + Ckecks the sum of all goals in \meta{list of goals} for the exercises of + type \meta{type} against \meta{relation and value}. + \command{IfExerciseGoalsSum\TF}[\marg{type}\marg{list of + goals}\marg{relation and value}\marg{true}\marg{false}] + Ckecks the sum of all goals in \meta{list of goals} for all exercises of + all types against \meta{relation and value}. + \command{TotalExerciseTypeGoal}[\marg{goal}\marg{type}\marg{singular}\marg{plural}] + Print the sum of goal \meta{goal} for the exercises of type \meta{type} + and append \meta{singular} or \meta{plural} depending on wether the sum + equals~$1$ or not. + \command{TotalExerciseGoal}[\marg{goal}\marg{singular}\marg{plural}] + Print the sum of goal \meta{goal} for all exercises of all types + and append \meta{singular} or \meta{plural} depending on wether the sum + equals~$1$ or not. +\end{commands} + +\subsubsection{Properties} +\begin{commands} + \expandable\command{IfExercisePropertyExist\TF}[\marg{property}\marg{true}% + \marg{false}] + Tests wether an exercise property with the name \meta{property} is defined. + \command{IfExercisePropertySet\TF}[\marg{property}\marg{true}\marg{false}] + Tests wether the exercise property \meta{property} has been set for the + current exercise. + \expandable\command{GetExerciseProperty}[\marg{property}] + Retrieves the value of the property \meta{property} for the current + exercise. + \command{GetExerciseProperty\TF}[\marg{property}\marg{true}\marg{false}] + Tests wether the exercise property \meta{property} has been set for the + current exercise. Inside the \meta{true} branch you can refer to the + retrieved value either with \code{\#1} or with \cs{PropertyValue}. + \emph{This command expands its contents inside a group.} + \command{GetExerciseIdForProperty}[\marg{property}\marg{value}] + Retrieves the property \property{id} of the exercise where the property + \meta{property} has the value \meta{value}. \emph{This only works for + \emph{unique} properties!} + \command{GetExerciseTypeForProperty}[\marg{property}\marg{value}] + Retrieves the property \property{type} of the exercise where the + property \meta{property} has the value \meta{value}. \emph{This only + works for \emph{unique} properties!} + \command{SetExerciseProperty}[\marg{type}\marg{id}\marg{property}\marg{value}] + Set the property \meta{property} of exercise of type \meta{type} and id + \meta{id} to \meta{value}. + \expandable\command{IfExerciseBooleanProperty\TF}[\marg{property}% + \marg{true}\marg{false}] + Checks wether the boolean property \meta{property} has value \code{true} + or \meta{false} and leaves the corresponding argument in the input + stream. Gives an error if \meta{property} is not a boolean property. + \expandable\command{GetExerciseAliasProperty}[\marg{property}] + Retrieves the value of the property of which \meta{property} is an alias + of for the current exercise. + \command{SaveExerciseProperty}[\marg{property}\meta{macro}] + Saves the value of the property \meta{property} for the current + exercise in macro \meta{macro}. + \command{GlobalSaveExerciseProperty} + Globally saves the value of the property \meta{property} for the current + exercise in macro \meta{macro}. + \command{ExercisePropertyIfSet\TF}[\marg{type}\marg{id}\marg{property}% + \marg{true}\marg{false}] + Test if the property \meta{property} has been set for the exercise of type + \meta{type} with id \meta{id}. + \expandable\command{ExercisePropertyGet}[\marg{type}\marg{id}\marg{property}] + Retrieves the value of the property \meta{property} for the exercise of type + \meta{type} with id \meta{id}. + \expandable\command{ExercisePropertyGetAlias}[\marg{type}\marg{id}\marg{property}] + Retrieves the value of the property of which \meta{property} is an alias + of for the exercise of type \meta{type} with id \meta{id}. + \command{ExercisePropertySave}[\marg{type}\marg{id}\marg{property}\meta{macro}] + Saves the value of the property \meta{property} for the exercise of type + \meta{type} with id \meta{id} in macro \meta{macro}. + \command{ExercisePropertyGlobalSave}[\marg{type}\marg{id}\marg{property}\meta{macro}] + Globally saves the value of the property \meta{property} for the exercise + of type \meta{type} with id \meta{id} in macro \meta{macro}. +\end{commands} + +\subsubsection{Parameters} +\begin{commands} + \expandable\command{GetExerciseParameter}[\marg{parameter}] + Retrieves the value of the parameter \meta{paramater} for the current exercise. + \expandable\command{GetExerciseName} + Retrieves the value of the parameter \parameter{exercise-name} for the + current exercise or of the parameter \parameter{solution-name} for the + current solution. + \expandable\command{ExerciseParameterGet}[\marg{type}\marg{id}\marg{parameter}] + Retrieves the value of the parameter \meta{parameter} for the exercise of type + \meta{type} with id \meta{id}. +\end{commands} + +\subsubsection{Tags} +\begin{commands} + \command{ForEachExerciseTag}[\marg{type}\marg{code}] + Loops over all tags of tag type \meta{type} for the current exercise + applying \meta{code} each time. Inside \meta{code} you can refer to the + corresponding tag with \code{\#1}. + \command{ListExerciseTags}[\marg{type}\marg{between}] + Lists all tags of tag type \meta{type} for the current exercise using + \meta{between} as a separator. + \command{UseExerciseTags}[\marg{type}\marg{between + two}\marg{between}\marg{between last two}] + Lists all tags of tag type \meta{type} for the current exercise using + \meta{between} as a separator and \meta{between last two} as separator + between the last two tags of the list. If the list only consists of two + tags \meta{between two} is used as separator. +\end{commands} + +\subsubsection{Further Commands for Usage in Template Definitions} +\begin{commands} + \expandable\command{ExerciseType} + Can be used to refer to the current exercise type. + \expandable\command{ExerciseID} + Can be used to refer to the current exercise id. + \expandable\command{ExerciseCollection} + Can be used in certain templates to refer to the collection that is + currently inserted. + \expandable\command{numberofusedexercises} + Holds the total number of used exercises. Useful in table template + definitions. + \expandable\command{ExerciseTableType}[\marg{code}] + In table template definitions this macro either expands to the given + exercise type or -- if no type has been given -- to \meta{code}. + \expandable\command{IfInsideSolution\TF}[\marg{true}\marg{false}] + Tests if the template is used inside a solution environment or not. + \expandable\command{IfPrintSolution\TF}[\marg{true}\marg{false}] + Tests if the option \option{print} for the solutions of the current + \cs{ExerciseType} is set to \code{true} or \code{false}. + \command{ForEachPrintedExerciseByType}[\marg{code}] + Loops over each \emph{printed} exercise ordered by the exercise types and + within each type by id. Inside \meta{code} you can refer to several + properties of the corresponding exercise: + \begin{itemize} + \item \code{\#1}: the type of the exercise + \item \code{\#2}: the id of the exercise + \item \code{\#3}: the \property{counter} property of the exercise + \item \code{\#4}: the \property{subtitle} property of the exercise + \item \code{\#5}: the \property{points} property of the exercise + \item \code{\#6}: the \property{bonus-points} property of the exercise + \end{itemize} + \command{ForEachUsedExerciseByType}[\marg{code}] + Loops over each \emph{used} exercise ordered by the exercise types and + within each type by id. Inside \meta{code} you can refer to several + properties of the corresponding exercise: + \begin{itemize} + \item \code{\#1}: the type of the exercise + \item \code{\#2}: the id of the exercise + \item \code{\#3}: the \property{counter} property of the exercise + \item \code{\#4}: the \property{subtitle} property of the exercise + \item \code{\#5}: the \property{points} property of the exercise + \item \code{\#6}: the \property{bonus-points} property of the exercise + \end{itemize} + \command{ForEachPrintedExerciseByID} + Loops over each \emph{printed} exercise order by the exercise id. Inside + \meta{code} you can refer to several properties of the corresponding + exercise: + \begin{itemize} + \item \code{\#1}: the type of the exercise + \item \code{\#2}: the id of the exercise + \item \code{\#3}: the \property{counter} property of the exercise + \item \code{\#4}: the \property{subtitle} property of the exercise + \item \code{\#5}: the \property{points} property of the exercise + \item \code{\#6}: the \property{bonus-points} property of the exercise + \end{itemize} + \command{ForEachUsedExerciseByID} + Loops over each \emph{used} exercise order by the exercise id. Inside + \meta{code} you can refer to several properties of the corresponding + exercise: + \begin{itemize} + \item \code{\#1}: the type of the exercise + \item \code{\#2}: the id of the exercise + \item \code{\#3}: the \property{counter} property of the exercise + \item \code{\#4}: the \property{subtitle} property of the exercise + \item \code{\#5}: the \property{points} property of the exercise + \item \code{\#6}: the \property{bonus-points} property of the exercise + \end{itemize} + \expandable\command{XSIMtranslate}[\marg{keyword}] + Delivers the translation of \meta{keyword} according to the current + document language (in the meaning of a \pkg{babel}~\cite{pkg:babel} or + \pkg{polyglossia}~\cite{pkg:polyglossia} language). Existing keywords and + keyword translations (and how to add new ones) are explained in + section~\vref{sec:exerc-transl}. + \command{XSIMexpandcode}[\marg{code}] + Expands \meta{code} like \cs*{edef} does and leaves the result in the + input stream. + \expandable\command{XSIMifchapter\TF}[\marg{true}\marg{false}] + Returns \meta{true} if both a macro \cs*{chapter} and a counter + \code{chapter} are defined and \meta{false} otherwise. + \command{XSIMmixedcase}[\marg{code}] + Converts the full expansion\footnote{This is a \cs*{romannumeral} + expansion~\cite{texsx:romannumeral}.\label{fn:romannumeral}} of + \meta{code} to mixed case: \\ + \verbcode+\XSIMmixedcase{this is some text}+ \XSIMmixedcase{this is some + text} \\ + \emph{This command expands \meta{code} before converting it}. + \command{XSIMputright}[\meta{macro}\marg{code}] + Extends the macro definition of \meta{macro} with \meta{code} putting it + to the right. This is more or less a local version of the LaTeX kernel + macro \cs*{g@addto@macro}. + \expandable\command{XSIMifeq\TF}[\marg{code 1}\marg{code + 2}\marg{true}\marg{false}] + Checks if the full expansion\footref{fn:romannumeral} of \meta{code 1} and + \meta{code 2} is the same tokenlist. + \expandable\command{XSIMifblank\TF}[\marg{code}\marg{true}\marg{false}] + Checks if the full expansion\footref{fn:romannumeral} of \meta{code} is + blank (\ie, if it is empty or only consists of spaces). +\end{commands} + +\subsection{Declaring Templates} +\subsubsection{Environment Templates}\label{sec:envir-templ} +\begin{commands} + \command{DeclareExerciseEnvironmentTemplate}[\marg{name}\marg{begin + code}\marg{end code}] + Declare the environment template \meta{name}. +\end{commands} +Environment templates are used by the exercise and solution environments. +Those are the templates set with the parameters \parameter{exercise-template} +and \parameter{solution-template}. + +The predefined template is called \enquote{\code{default}}, see +section~\vref{sec:exercise-templ-default}. + +\subsubsection{Heading Templates}\label{sec:heading-templates} +\begin{commands} + \command{DeclareExerciseHeadingTemplate}[\marg{name}\marg{code}] + Declare the heading template \meta{name}. +\end{commands} +Heading templates are used by \cs{printsolutions}, \cs{printsolutionstype} and +\cs{printcollection}. Those are the templates set with the option +\option{headings-template} of the modules \module{print-solutions} and +\module{print-collection}. + +The predefined templates are \enquote{\code{default}}, +\enquote{\code{collection}}, \enquote{\code{per-section}} and +\enquote{\code{per-chapter}} see section~\vref{sec:headings-templates}. + +\subsubsection{Grading Table Templates}\label{sec:grad-table-templ} +\begin{commands} + \command{DeclareExerciseTableTemplate}[\marg{name}\marg{code}] + Declare the grading table template \meta{name}. +\end{commands} +Table templates are used by \cs{gradingtable}. Those are the templates set +with the option \option{template} of module \module{grading-table} + +The predefined templates are \enquote{\code{default}} and +\enquote{\code{default}}, see sections~\vref{sec:table-templ-default} +and~\vref{sec:table-templ-default*}. + +\subsection{Examples}\label{sec:template-examples} + +The repository of this package\footnote{GitHub: + \url{https://github.com/cgnieder/xsim/}, CTAN: + \url{http://www.ctan.org/pkg/xsim/}} currently includes +\theexamplefiles~example documents demonstrating how different aspects of this +package work or how different kinds of problems can be solved or how different +kinds of layouts can be achieved as well as how solve concrete problems that +have come up in different \LaTeX\ forums, see +section~\vref{sec:example-files}. + +\subsubsection{The \code{default} Exercise Template}\label{sec:exercise-templ-default} + +Below the definition of the \code{default} exercise template provided by +\xsim\ is shown: + +\begin{sourcecode} + \DeclareExerciseEnvironmentTemplate{default}{% + \subsection* + {% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfInsideSolutionF + {% + \GetExercisePropertyT{subtitle} + { {\normalfont\itshape\PropertyValue}}% + }% + } + \GetExercisePropertyT{points} + {% + \marginpar + {% + \IfInsideSolutionF{\rule{1.2cm}{1pt}\slash}% + \PropertyValue + \GetExercisePropertyT{bonus-points}{~(+\PropertyValue)}% + ~\XSIMtranslate {point-abbr}% + }% + }% + } + {} +\end{sourcecode} + +\subsubsection{A New Exercise Type Using \pkg*{tcolorbox}} +Let's say we want exercises to be put in a \env*{tcolorbox}. We want a bold +title and. if given, an italic subtitle. Exercises should also have the +points after the subtitle in parentheses if given. Let's also say we want +those to be an additional exercise type in addition to the ones \xsim\ already +provides. This is shown with the following code which is also how the +problems in this manual have been defined: + +\begin{sourcecode} + \DeclareExerciseEnvironmentTemplate{tcolorbox} + {% + \tcolorbox[ + colback = red!5!white , + colframe = red!75!black , + colbacktitle = yellow!50!red , + coltitle = red!25!black , + breakable , + drop shadow , + beforeafter skip = .5\baselineskip , + title = + \textbf{\GetExerciseName~\GetExerciseProperty{counter}}% + \GetExercisePropertyT{subtitle}{ \textit{\PropertyValue}}% + \IfInsideSolutionF{% + \GetExercisePropertyT{points}{ % notice the space + (% + \PropertyValue + \IfExerciseGoalSingularTF{points} + {\XSIMtranslate{point}} + {\XSIMtranslate{points}}% + )% + }% + }% + ]% + } + {\endtcolorbox} + + \DeclareExerciseType{problem}{ + exercise-env = problem , + solution-env = answer , + exercise-name = Problem , + solution-name = Answer , + exercise-template = tcolorbox , + solution-template = tcolorbox + } +\end{sourcecode} + +See it in action: +\begin{example} + \begin{problem}[subtitle=My subtitle,points=5] + This is a problem using a subtitle and points. + \end{problem} + \begin{answer} + This is the answer to problem~\GetExerciseProperty{counter}. + \end{answer} +\end{example} + +\subsubsection{Mimicking \pkg*{exsheets}' \code{runin} Template} + +The following example shows how you could mimick \pkg*{exsheets}' \code{runin} +template. The outcome isn't exactly the same since \pkg{exsheets} doesn't use +\cs*{marginpar} but the result should look very similar. A safer definition +would use a real sectioning command for the title. + +\begin{sourcecode} + \usepackage{needspace} + \DeclareExerciseEnvironmentTemplate{runin} + {% + \par\vspace{\baselineskip} + \Needspace*{2\baselineskip} + \noindent + \textbf{\XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}}% + \GetExercisePropertyT{subtitle}{ \textit{#1}} % + \GetExercisePropertyT{points}{% + \marginpar{% + \PropertyValue + \GetExercisePropertyT{bonus-points}{+\PropertyValue}% + \,\IfExerciseGoalSingularTF{points} + {\XSIMtranslate{point}} + {\XSIMtranslate{points}}% + }% + }% + } + {} +\end{sourcecode} + +See it in action: +\begin{example} + \xsimsetup{exercise/template=runin} + \renewcommand*\theexercise{\arabic{exercise}.} + \begin{exercise}[subtitle=exsheets' runin,points=2.5] + \lipsum[4] + \end{exercise} +\end{example} + +\subsubsection{Mimicking \pkg*{exsheets}' \code{margin} Template} + +The following example shows how you could mimick \pkg*{exsheets}' +\code{margin} template. + +\begin{sourcecode} + \usepackage{needspace} + \DeclareExerciseEnvironmentTemplate{margin} + {% + \par\vspace{\baselineskip} + \Needspace*{2\baselineskip} + \noindent + \llap{% + \smash{% + \tabular[t]{@{}r@{}} + \textbf{\XSIMmixedcase{\GetExerciseName}~\GetExerciseProperty{counter}} + \IfExercisePropertySetT{points}{% + \tabularnewline + (% + \GetExerciseProperty{points}% + \GetExercisePropertyT{bonus-points}{+#1}% + \,\XSIMtranslate{point-abbr}% + )% + }% + \endtabular + } % notice the space + }% + } + {} +\end{sourcecode} + +See it in action: +\begin{example} + \xsimsetup{exercise/template=margin} + \renewcommand*\theexercise{\arabic{exercise}.} + \begin{exercise}[subtitle=exsheets' margin,points=2.5] + \lipsum[4] + \end{exercise} +\end{example} + +\subsubsection{The Headings Templates}\label{sec:headings-templates} +\xsim\ defines four heading templates which only differ by which text they +output: +\begin{sourcecode} + \DeclareExerciseHeadingTemplate{default} + {\section*{\XSIMtranslate{default-heading}}} + \DeclareExerciseHeadingTemplate{collection} + {\section*{\XSIMtranslate{collection-heading}}} + \DeclareExerciseHeadingTemplate{per-section} + {\section*{\XSIMtranslate{per-section-heading}}} + \DeclareExerciseHeadingTemplate{per-chapter} + {\section*{\XSIMtranslate{per-chapter-heading}}} +\end{sourcecode} +Section~\vref{sec:exerc-transl} shows how the translations are defined. + +\subsubsection{The \code{default} Table Template}\label{sec:table-templ-default} +This template is the one used for grading tables per default. It has a +vertical layout. + +\begin{sourcecode} + \DeclareExerciseTableTemplate{default}{% + \XSIMputright\ExerciseTableCode{% + \toprule + \XSIMifblankTF{\ExerciseType} + {} + {\XSIMmixedcase{\GetExerciseParameter{exercise-name}}} + & + \XSIMmixedcase{\XSIMtranslate{points}} & + \XSIMtranslate{reached} \\ + \midrule + }% + \ForEachUsedExerciseByType{% + \XSIMifeqTF{#1}{\ExerciseTableType{#1}} + {% + \XSIMifblankTF{\ExerciseType} + {% + \XSIMputright\ExerciseTableCode{% + \XSIMmixedcase{\ExerciseParameterGet{#1}{exercise-name} }% + }% + } + {}% + \XSIMputright\ExerciseTableCode + {#3 & \XSIMifblankTF{#5}{\printgoal{0}}{\printgoal{#5}} & \\ }% + } + {}% + } + \XSIMputright\ExerciseTableCode{% + \midrule + \XSIMtranslate{total} & + \XSIMifblankTF{\ExerciseType} + {\TotalExerciseGoal{points}{}{}} + {\TotalExerciseTypeGoal{\ExerciseType}{points}{}{}} & + \\ \bottomrule + }% + \XSIMexpandcode{% + \noexpand\begin{tabular}{\XSIMifblankTF{\ExerciseType}{l}{c}cc} + \noexpand\ExerciseTableCode + \noexpand\end{tabular}% + }% + } +\end{sourcecode} + +The part +\begin{sourcecode} + \XSIMifblankTF{\ExerciseType}{ ... }{ ... } +\end{sourcecode} +repeatedly checks if an exercise type has been given for the table. This +makes it possible to design the table differently if it is for one exercise +type only (the \code{true} case) or for all exercise types (the \code{false} +case). \cs*{ExerciseTableType}\marg{code} either expands to the given +exercise type or to \meta{code}. + +\subsubsection{The \code{default*} Table Template}\label{sec:table-templ-default*} +The second of the predefined grading table templates. It has a horizontal +layout. +\begin{bewareofthedog} + If you have a lot of exercises the width of a table with this layout may + exceed the text width of the document! +\end{bewareofthedog} + +\begin{sourcecode} + \DeclareExerciseTableTemplate{default*}{% + \XSIMputright\ExerciseTableCode{% + \toprule + \XSIMifblankTF{\ExerciseType} + {} + {\XSIMmixedcase{\GetExerciseParameter{exercise-name}}} + &% + }% + \ForEachUsedExerciseByType{% + \XSIMifeqTF {#1} { \ExerciseTableType {#1} } + { + \XSIMifblankTF{\ExerciseType} + {% + \XSIMputright\ExerciseTableCode{% + \XSIMmixedcase{\ExerciseParameterGet{#1}{exercise-name} }% + }% + } + {}% + \XSIMputright\ExerciseTableCode{#3 &} + } + {}% + }% + \XSIMputright\ExerciseTableCode{% + \XSIMtranslate{total} \\ + \midrule + \XSIMmixedcase{\XSIMtranslate{points}} & + }% + \ForEachUsedExerciseByType{% + \XSIMifeqTF{#1}{\ExerciseTableType{#1}} + {% + \XSIMputright\ExerciseTableCode{% + \XSIMifblankTF{#5}{\printgoal{0}}{\printgoal{#5}} &}% + } + {}% + }% + \XSIMputright\ExerciseTableCode{% + \XSIMifblankTF{\ExerciseType} + {\TotalExerciseGoal{points}{}{}} + {\TotalExerciseTypeGoal{\ExerciseType}{points}{}{}}% + \\ \midrule + \XSIMtranslate{reached} &% + }% + \ForEachUsedExerciseByType{% + \XSIMifeqTF{#1}{\ExerciseTableType{#1}} + {\XSIMputright\ExerciseTableCode{&}} + {}% + }% + \XSIMputright\ExerciseTableCode{ \\ \bottomrule }% + \def\numberofcolumns{% + \XSIMifblankTF{\ExerciseType} + {\numberofusedexercises} + {\csname numberof \ExerciseType s\endcsname}% + }% + \XSIMifeqF{\numberofcolumns}{0} + {% + \begin{tabular}{l*{\numberofcolumns}{c}c} + \ExerciseTableCode + \end {tabular}% + }% + } +\end{sourcecode} + +The part +\begin{sourcecode} + \XSIMifblankTF{\ExerciseType}{ ... }{ ... } +\end{sourcecode} +repeatedly checks if an exercise type has been given for the table. This +makes it possible to design the table differently if it is for one exercise +type only (the \code{true} case) or for all exercise types (the \code{false} +case). \cs*{ExerciseTableType}\marg{code} either expands to the given +exercise type or to \meta{code}. + +\section{Exercise Translations}\label{sec:exerc-transl} + +\begin{commands} + \command{DeclareExerciseTranslation}[\marg{keyword}\marg{language}\marg{translation}] + Declare the translation of \meta{keyword} for language \meta{language}. + \command{DeclareExerciseTranslations}[\marg{keyword}\marg{translations}] + Declare the translations of \meta{keyword} for several languages at once. + See an example of the usage below. + \expandable\command{XSIMtranslate}[\marg{keyword}] + Delivers the translation of \meta{keyword} according to the current + document language (in the meaning of a \pkg{babel}~\cite{pkg:babel} or + \pkg{polyglossia}~\cite{pkg:polyglossia} language). + \command{ForEachExerciseTranslation}[\marg{code}] + Loops over all translations of all keywords known to \xsim. Inside + \meta{code} you can refer to the keyword with \code{\#1}, to the language + with \code{\#2}, and to the translation with \code{\#3}. +\end{commands} + +As an example how to use \cs{DeclareExerciseTranslations} here is how the +translations for \code{exercise} have been defined: + +\begin{sourcecode} + \DeclareExerciseTranslations{exercise}{ + Fallback = exercise , + English = exercise , + French = exercice , + German = \"Ubung + } +\end{sourcecode} + +Table~\vref{tab:translation-keys} shows all existing keywords with all +predefined translations. + +\ForEachExerciseTranslation{ + \appto\translationtable{\texttt{#1} & #2 & \texttt{\detokenize{#3}} \\} +} + +\begin{longtable}{llp{.55\linewidth}} + \caption{Translation keywords predefined by \xsim.} + \label{tab:translation-keys} \\ + \toprule + \bfseries keyword & \bfseries language & \bfseries translation \\ + \midrule + \endfirsthead + \toprule + \bfseries keyword & \bfseries language & \bfseries translation \\ + \midrule + \endhead + \bottomrule + \endlastfoot + \midrule + & & \hfill\emph{continues} \\ + \endfoot + \translationtable +\end{longtable} + +\section{Cloze Tests and Blank Lines} + +Similar to \pkg{exsheets} \xsim\ provides a command \cs{blank}: +\begin{commands} + \command{blank}[\sarg\oarg{options}\marg{text to be filled in}] + Creates a blank in normal text or in an exercise but fills the text of its + argument if inside a solution. If used at the \emph{begin of a paragraph} + \cs{blank} will do two things: it will set the linespread according to an + option explained below and will insert \cs*{par} after the lines. The + starred version doesn't do these things. +\end{commands} + +Those are the options for customization: +\begin{options} + \keyval{blank-style}{code}\Module{blank}\Default{\cs*{underline}\Marg{\#1}} + Instructions for typesetting the blank cloze. Refer to the filled in + space with \code{\#1}. + \keyval{filled-style}{code}\Module{blank}\Default{\cs*{underline}\Marg{\#1}} + Instructions for typesetting the filled cloze. Refer to the filled in text + with \code{\#1} + \keyval{style}{code} + Shortcut for setting both \option{blank-style} and \option{filled-style} + at once. + \keyval{scale}{decimal number}\Module{blank}\Default{\code{1}} +\textsc{} Scales the blank to \meta{decimal number} times its natural width. + \keyval{width}{dim}\Module{blank}\Default + Sets the blank to a width of \meta{dim}. This takes precendence over + \option{scale}. + \keyval{linespread}{decimal number}\Module{blank}\Default{\code{1}} + Set the linespread for the blank lines. This only has an effect if + \cs{blank} is used at the begin of a paragraph. + \keyval{line-increment}{dim}\Module{blank}\Default{\code{1pt}} + The blank line is built in multiples of this value. If the value is too + large you may end up with uneven lines. If the value is too small you may + end up with a non-ending compilation. Experiment with values to find the + suiting one for your use case. + \keyval{line-minimum-length}{dim}\Module{blank}\Default{\code{2em}} + The minimal length a line must have before it is built step by step. +\end{options} + +\begin{example} + This is a \blank{blank} outside in normal text. + \begin{exercise} + Try to fill in \blank[width=4cm]{these} blanks. All of them + \blank{are created} by using the \cs{blank} \blank{command}. + \end{exercise} + \xsimsetup{blank/filled-style=\textcolor{red}{#1}} + \begin{solution}[print] + Try to fill in \blank[width=4cm]{these} blanks. All of them + \blank{are created} by using the \cs{blank} \blank{command}. + \end{solution} +\end{example} +A number of empty lines are easily created by setting the \option{width} +option: +\begin{example} + Write up the pros and cons of \xsim\ over \pkg{exsheets}: + + \blank[width=4.8\linewidth,linespread=1.5]{} +\end{example} + +\edef\lastsection{\arabic{section}} + +\appendix + +\section{Future Plans} + +\xsim\ is complete in so far as it is perfectly usable to create exams or +exercise and solution sections in books with the most freedom in layout +already. But still there are features which would be useful additions. Below +I list all ideas that I currently plan to add to \xsim: +\begin{itemize} + \item a document class \code{xsim-exam} for creating exams; this class + should itself feature the possibility of creating different versions of an + exam, maybe already provide multiple choice questions and so on; one could + also think about automatic creation of running headers and footers, \ie, + means for changing the layout of the exam; following the spirit of \xsim\ + this should probably be done using templates as well. +\end{itemize} +I am very open to suggestions regarding features, both in general and +specifically regarding the document class. + +\section{FAQ \& How to\dots} +This section serves as a kind of gallery showing solutions to common +problems. I expect this section to grow over the years. Some examples +especially regarding other layouts are also shown in example files added to +this package. + +\subsection{\dots Know if \xsim\ Needs Another Compilation?} +If \xsim\ wants you to recompile your document it writes the following to the +logfile: +\begin{sourcecode} + ************************************************* + * xsim warning: "rerun" + * + * Exercise properties may have changed. Rerun to get them synchronized. + ************************************************* +\end{sourcecode} +So just check the logfile regularly (which you should be doing anyway) and +keep your eyes open. + +\subsection{\dots Resolve Getting Repeatedly Wrong Exercise Properties or + Wrong Exercise Lists?}\label{sec:resolve-getting} +\xsim\ writes a lot of stuff to the auxfile for re-using information on +subsequent compilations. If you add exercises, change properties \etc\ it +might happen that wrong information is staying in the auxfile and is wrongly +used by \xsim. In such cases deleting the auxfile and doing a few fresh +compilations may resolve your problems. + +Sometimes the \emph{existence of exercise or solution files from earlier + compilations} may lead to wrong lists of exercises or solutions. In such +cases it can be useful to delete all those files and doing a fresh +compilation. It may be helpful to use a subfolder for those exernal files +which will make deleting them a little bit easier. (Don't forget to both +create the subfolder and set \option{path} accordingly then.) + +Using the \option{clear-aux} option might help to reduce erroneous exercises. + +\subsection{\dots Resolve Strange Errors After Updating?} +\xsim\ writes a lot of stuff to the auxfile. An update may well change how +this is done so deleting the auxfile and doing a few fresh compilations may +resolve your problems. + +\subsection{\code{! TeX capacity exceeded, sorry [text input levels=15].} + Why?} +Did you try to use an exercise or solution in a macro of some sort? This +generally will fail\footnote{The reasons are not entirely clear to me.}. But +there should never be the need to hide the environments inside of a macro, +anyway. + +\subsection{\code{Runaway argument? !File ended while scanning use of \^\^M.} Why?} +Did you try to use an exercise or solution in a macro of some sort? This +generally will fail. But there should never be the need to hide the +environments inside of a macro, anyway. + +\subsection{\dots Put a Star (or Another Symbol) in Headings of Exercises That + Are Special?} + +The code below shows one possible modification of an exercise template which +allows to easily create bonus exercises: +\begin{sourcecode} + % preamble: + \usepackage{amsymb} + % declare boolean property: + \DeclareExerciseProperty*{bonus} + \DeclareExerciseEnvironmentTemplate{bonus} + {% + \subsection* + {% + % test for boolean property and insert star symbol if true: + \IfExerciseBooleanPropertyT{bonus}{\llap{$\bigstar$ }Bonus }% + \XSIMmixedcase{\GetExerciseName}\nobreakspace + \GetExerciseProperty{counter}% + \IfInsideSolutionF + {% + \IfExercisePropertySetT{subtitle} + { {\normalfont\itshape\GetExerciseProperty{subtitle}}}% + }% + } + \GetExercisePropertyT{points} + {% + \marginpar + {% + \IfInsideSolutionF{\rule{1.2cm}{1pt}\slash}% + \PropertyValue + \GetExercisePropertyT{bonus-points} + {\nobreakspace(+\PropertyValue)}% + \nobreakspace\XSIMtranslate{point-abbr}% + }% + }% + } + {} +\end{sourcecode} + +The usage is now as follows: +\begin{example} + \xsimsetup{exercise/template = bonus} + % set the boolean property to true + \begin{exercise}[bonus] + A bonus question. + \end{exercise} +\end{example} + +\subsection{\dots Create and Use \xsim\ Style Files?} + +\xsim\ offers you the possibility to create own \emph{style files}. Let's say +you want to have a style called \code{math-exam}. Then you need to save all +necessary definitions in a file called: +\begin{center} + \code{xsim.math-exam.code.tex} +\end{center} +The first command in the file should be \cs{xsimstyle}\Marg{math-exam}. This +file can now be loaded into your document using +\cs{loadxsimstyle}\Marg{math-exam}: +\begin{sourcecode} + \documentclass[DIV=18,parskip=half]{scrartcl} + \usepackage[T1]{fontenc} + \usepackage[utf8]{inputenc} + + \usepackage[clear-aux]{xsim} + \loadxsimstyle{math-exam} + + \title{Math Exam \#3} + \date{2017-03-28} +\end{sourcecode} + +In this style file stuff like template and property definitions should +happen. This is more or less a convenient way to +\begin{itemize} + \item keep the preamble \enquote{clean} and + \item define re-usable styles without the need of copying the document + preamble to another document. +\end{itemize} +A style file is like a package or class file, \ie, \code{@} has category +code~11 (letter). + +The formal description of the commands: +\begin{commands} + \command{xsimstyle}[\sarg\marg{style name}] + The first command in a \xsim\ style file called \code{xsim.\meta{style + name}.code.tex} which defines the \xsim\ style \meta{style name}. The + starred version activates expl3 syntax\footnote{Those users who want this + will know what it means. If you don't know what it means you will not + need it.}. + \command{loadxsimstyle}[\marg{csv list of style names}] + Load one or more styles into the document. +\end{commands} + +\begin{bewareofthedog} + At the moment this mechanism offers no advantages over creating a custom + package or simply \cs*{input}ing a file. Future versions might provide + additional features. +\end{bewareofthedog} + +\subsection{\dots Print All Solutions Grouped by Section?} +Here is an idea how to get a list of all solutions grouped by the section the +corresponding exercises are appearing in. +\begin{sourcecode} + % preamble: + % \usepackage{etoolbox} + % \newcounter{sections} + + % document: + \setcounter{sections}{1} + \whileboolexpr + { test {\ifnumless{\value{sections}}{\value{section}+1}} } + { + \printsolutions[section=\value{sections},headings-template=per-section] + \stepcounter{sections} + } +\end{sourcecode} +For this manual we then get the following list\footnote{Taking care of the + fact that we're in the appendix now which means we can't use + \cs*{value}\Marg{section}. Therefore this manual does + \cs*{edef}\cs*{lastsection}\Marg{\cs*{arabic}\Marg{section}} right before + \cs*{appendix}}. + +\newcounter{sections} +\setcounter{sections}{1} +\whileboolexpr + { test {\ifnumless{\value{sections}}{\lastsection+1}} } + { + \printsolutions[section=\value{sections},headings-template=per-section] + \stepcounter{sections} + } + +\section{The \pkg*{xsimverb} package}\label{sec:xsimverb-package} +\xsim\ comes bundled with another package called \pkg{xsimverb}. This package +loads a very small subset of \xsim\ which allows to create environments which +write their contents verbatim to external files. It provides the following +commands (which of course are also available in \xsim, too): + +\begin{commands} + \command{XSIMfilewritestart}[\sarg\marg{file name}] + Start writing to the file named \meta{file name}. This should be the + \emph{last} command in the \emph{begin} definition of an environment. If + is is used in an environment with arguments where the \emph{last} argument + is optional you should check if the optional argument is given and use + the starred version if the test is negative. This is demonstrated in an + example below using \pkg{xparse}'s \cs{NewDocumentEnvironment}. \emph{If + you want an environment with only an optional argument you \emph{should} + use \pkg{xparse}'s commands to define it. Due to the way how + \cs*{newenvironment} scans for optional arguments you'll otherwise may + end up with leading spaces gobbled from the first line in your + environment.} + \command{XSIMfilewritestop} + Stop writing to the file. This should be the \emph{first} command in the + \emph{end} definition of an environment. + \command{XSIMsetfilebegin}[\marg{code}] + This command can be used to write something to the external file + \emph{before} the environment contents. Must be set before + \cs{XSIMfilewritestart} in the \emph{begin} definition. + \command{XSIMsetfileend}[\marg{code}] + This command can be used to write something to the external file + \emph{after} the environment contents. Must be set before + \cs{XSIMfilewritestart} in the \emph{begin} definition. + \command{XSIMgobblechars}[\marg{integer}] + Determines how many characters are cut off of the beginning of each line + of the environment body before it is written to the file. The default + value is~$0$. +\end{commands} + +An example of how to use those commands: +\begin{sourcecode} + \documentclass{article} + \usepackage{xsimverb,listings} + + \makeatletter + \NewDocumentEnvironment{example}{o} + {% + \XSIMsetfilebegin{\@percentchar\space file `\jobname.tmp'}% + \XSIMsetfileend{\@percentchar\space bye bye}% + \IfNoValueTF{#1} + {\XSIMfilewritestart*{\jobname.tmp}} + {\XSIMfilewritestart{\jobname.tmp}}% + } + {% + \XSIMfilewritestop + \lstinputlisting[language={[LaTeX]TeX}]{\jobname.tmp}% + \input{\jobname.tmp} + } + \makeatother + + \begin{document} + + \begin{example} + bla bla \LaTeX + \end{example} + + \end{document} +\end{sourcecode} + +The \code{tmp} file produced by the above example will contain the following +three lines (if the file itself was called \code{test.tex}): +\begin{sourcecode} + % file `test.tmp' + bla bla \LaTeX + % bye bye +\end{sourcecode} + +\section{All Exercise Examples} + +\begin{bewareofthedog} + You will notice that some exercises from + section~\vref{sec:template-examples} look differently in this section. That + is because all exercises of a type use the template that's \emph{currently + active}. If you want exercises with a different look you should use + different exercises types. +\end{bewareofthedog} + +The following list is created with this code: +\begin{sourcecode} + \xsimsetup{exercise/template = bonus} + \printcollection[headings]{all exercises} +\end{sourcecode} + +\xsimsetup{exercise/template = bonus} +\printcollection[headings]{all exercises} + +\section{All Solution Examples} +\printsolutions + +\section{Example Documents Coming With This Package}\label{sec:example-files} +The repository of this package\footnote{GitHub: + \url{https://github.com/cgnieder/xsim/}, CTAN: + \url{http://www.ctan.org/pkg/xsim/}} currently includes +\theexamplefiles~example documents demonstrating how different aspects of this +package work or how different kinds of problems can be solved or how different +kinds of layouts can be achieved as well as how solve concrete problems that +have come up in different \LaTeX\ forums. + +\listexamplefiles + +\printbibliography + +\end{document} |