diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex/thesis-gwu/tex')
5 files changed, 659 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/thesis-gwu/tex/appendix.tex b/Master/texmf-dist/doc/latex/thesis-gwu/tex/appendix.tex new file mode 100644 index 00000000000..62dcf830bc7 --- /dev/null +++ b/Master/texmf-dist/doc/latex/thesis-gwu/tex/appendix.tex @@ -0,0 +1,37 @@ +% !TEX root = ../thesis-sample.tex +\appendix +\chapter{Appendix} +This is an example of an appendix. +The only difference is the use of \verb+\appendix+ command at the start of this \texttt{tex} file. +This automatically changes the chapter and section headings. + +\section{A section} +The easiest method. + +\begin{equation}\label{eq:sum} + x_k = \frac{a_k+b_k}{2} +\end{equation} + +\section{False Position} +\lipsum[20] + + +\section{Starting the Appendices} +Actually, using appendices is quite simple. Immediately after the end +of the last chapter and before the start of the first appendix, simply +enter the command \verb|\appendix|. This will tell \LaTeX~to change +how it interprets the commands \verb|\chapter|, \verb|\section|, +\textit{etc.} + +Each appendix is actually a chapter, so once the \verb|\appendix| +command has been called, start a new appendix by simply using the +\verb|\chapter| command. + +Note that the \verb|\appendix| command should be called only +once--not before the start of each appendix. + +All the fancy referencing and tools still work. +You only need to add the appendix command and all will be as it should be. + +\chapter{Another Appendix} +\lipsum[24] diff --git a/Master/texmf-dist/doc/latex/thesis-gwu/tex/frontmatter.tex b/Master/texmf-dist/doc/latex/thesis-gwu/tex/frontmatter.tex new file mode 100644 index 00000000000..213d5c0cc97 --- /dev/null +++ b/Master/texmf-dist/doc/latex/thesis-gwu/tex/frontmatter.tex @@ -0,0 +1,182 @@ +% !TEX root = ../thesis-sample.tex + +% --------- FRONT MATTER PAGES --------------------- +% Title of the thesis +\title{Thesis GWU Example Dissertation} + +% Author name +\author{Shankar Kulumani} + +% Previous degrees +\bsdepartment{Astronautical Engineering} +\bsschool{US Air Force Academy} +\bsgrad{May 2009} + +\msdepartment{Aeronautical and Astronautical Engineering} +\msschool{Purdue University} +\msgrad{May 2013} +\showmsdegree % you can show or hide the MS degree line +% \hidemsdegree + +% PhD degree commands +% Committee +\showcommitteepage % hide this page if you're doing a MS thesis +%\hidecommitteepage +\committee{ % +Taeyoung Lee, Associate Professor of Engineering and Applied Science,\\ +Dissertation Director\\ % remember to add a space between committee members + +Full Name, Title, \\ +Dissertation Director/Dissertation Co-Director/Committee Member +} + +% Chair must be entered separately for formatting reasons. +\chair{Tayeoung Lee} +\chairtitle{Associate Professor of Mechanical and Aerospace Engineering} +% Department +\department{Mechanical and Aerospace Engineering} + +\phdgrad{Dec 1, 2018} +\defensedate{Dec 1, 2018} +% Year of completion for copyright page and perhaps other places +\year=2018 + +% Copyright page +%\copyrightholder{Someone else} + +% Dedication +\dedication[8]{ % +\textit{Include a fancy quote or dedication} +} + +% Acknowledgments +\acknowledgments{ + Here you can acknowledge all of those people who have helped you to reach this point. + It's rare that any work is done in a vacuum and your research is no exception. + Feel free to be grateful for all those who've aided you along your way. +} + +% ----------------------------------------------------------------- +% Typically only one of Preface/Foreward/Prologue would be in your thesis. +% To choose one simply delete the others and they will automatically dissappear + +% Preface +\preface{ + This is the preface. + It's another front matter page that offers additional detail into your work. + Typically, only one (preface OR prologue OR foreword) is used. + You can remove the other sections by deleting them inside \texttt{tex/frontmatter.tex} or using the appropriate show or hide commands. +} + +\prologue{ + This is the prologe. + It's another front matter page that offers additional detail into your work. + Typically, only one (preface OR prologue OR foreword) is used. + You can remove the other sections by deleting them inside \texttt{tex/frontmatter.tex} or using the appropriate show or hide commands. +} + +\foreword[2]{ + This is the forword. + It's another front matter page that offers additional detail into your work. + Typically, only one (preface OR prologue OR foreword) is used. + You can remove the other sections by deleting them inside \texttt{tex/frontmatter.tex} or using the appropriate show or hide commands. +} +% ---------------------------------------------------------------------- + +% commands to show or hide front matter pages + +\showcopyright +\showabstract +\showcommitteepage +\showdedication +\showacknowledgments +\showpreface +\showprologue +\showforeword + +% ------------ TABLE OF CONTENTS ---------------------- +% Commands to hide or show lists of figures, tables, etc. +\showlistoffigures +\showlistoftables +\hidenomenclature + +% --------- ACRONYMS and SYMBOLS ------------------------------ +% TODO Deprecate the entire acronym package and switch to glossaries + +% You can either use the acronymn or glossaries package (both work) +% Definition of any abbreviations used. +\abbreviations{ + \acro{CRTBP}{Circular Restricted Three Body Problem} + \acro{NSA}{National Security Agency} + \acro{SSME}{Space Shuttle Main Engine} +} +% call an abbreviation using \ac{abbrev} + +% symbols and acronyms only show up when used in the text +\symbols{ + \acro{J}{Moment of Inertia} +} + +% if you want acronymn (simpler) then change these to show +\hidelistofabbreviations +\hidelistofsymbols + +% if you want glossaries (more powerful) then leave above as hide +% GLOSSARIES package options - automatically turns off front pages from acronym package + +% acronymns and symbols are basically the same, but there are two provided +% locations where they can show up +\setabbreviationstyle[acronym]{long-short} +\setabbreviationstyle[abbreviation]{long-short} +\makeglossaries +% you can hide/show the glossaries page +\showglossarieslistofabbreviations +\showglossarieslistofsymbols +\showglossariesglossaryofterms + +% acronyms defined in glossaries +\newabbreviation{crtbp}{CRTBP}{Circular Restricted Three Body Problem} +\newabbreviation{lidar}{LIDAR}{Light Detection and Ranging} +% defining abbreviations like this allows for autocompletion +\newglossaryentry{filo}{ + name={FILO}, + type=\glsxtrabbrvtype, + description={first in last out}, + first={first in last out (FILO)} +} + +% glossary entries +\newglossaryentry{linux}{ + name=Linux, + description={is a generic term referring to the family of Unix-like computer operating systems that use the Linux kernel}, + plural=Linuces +} + +\newglossaryentry{matrix}{ + name={matrix}, + plural={matrices}, + description={rectangular array of quanttities} +} + +% symbols +\newglossaryentry{M}{ + type=symbols, + name={\ensuremath{M}}, + sort=M, + description={a \gls{matrix}} +} + +\newglossaryentry{F}{ + type=symbols, + name={\ensuremath{F}}, + sort=F, + description={External Force} +} +% Some abstract text +\abstract{ +This is the abstract. +It contains some random text from the \texttt{lipsum} package. +You may safely remove the \texttt{lipsum} package once you write your thesis. + +\lipsum[1] +} diff --git a/Master/texmf-dist/doc/latex/thesis-gwu/tex/intro.tex b/Master/texmf-dist/doc/latex/thesis-gwu/tex/intro.tex new file mode 100644 index 00000000000..f57cbf4fbda --- /dev/null +++ b/Master/texmf-dist/doc/latex/thesis-gwu/tex/intro.tex @@ -0,0 +1,102 @@ +% !TEX root = ../thesis-sample.tex + +\chapter{Now we know what they mean by ``advanced'' tactical training.} \label{chap:intro} + +Here's an acronym \ac{CRTBP} and a symbol \ac{F}, followed by some random text. +Let's use an acronym from the \texttt{glossaries} package, \acrfull{crtbp} and \gls{F}. +Now what are the possibilities of warp drive? Cmdr Riker's nervous system has been invaded by an unknown microorganism. The organisms fuse to the nerve, intertwining at the molecular level. That's why the transporter's biofilters couldn't extract it. The vertex waves show a K-complex corresponding to an REM state. The engineering section's critical. Destruction is imminent. Their robes contain ultritium, highly explosive, virtually undetectable by your transporter. + +Deflector power at maximum. Energy discharge in six seconds. Warp reactor core primary coolant failure. Fluctuate phaser resonance frequencies. Resistance is futile. Recommend we adjust shield harmonics to the upper EM band when proceeding. These appear to be some kind of power-wave-guide conduits which allow them to work collectively as they perform ship functions. Increase deflector modulation to upper frequency band. + +\section{Float environments} +There are many possible float enviornments, and this section will serve as an introduction and demonstration of some of them. +In addition, it offers the ability to ensure that this template actually follows the guidelines. + +\subsection{Figures}\label{ssec:figures} + +Here is a figure as shown in~\cref{fig:picard}. +Notice how we're using the fancy referencing offered by the \verb+cleveref+ package. +Instead of using the normal~\verb+\ref+ command we instead use~\verb+\cref+. +The magic of \LaTeX automatically figures out that the previous reference points to a figure while~\cref{ssec:figures} points to a section. + +\begin{figure} + \centering + \includegraphics[width=0.5\textwidth]{figures/picard_yes.jpg} + \caption[Damage report!]{I'm afraid I still don't understand, sir.\label{fig:picard}} +\end{figure} + +\subsection{Tables}\label{ssec:tables} + +Here's a table in~\cref{tab:table} + +\begin{table} +\begin{center} + \begin{tabular}{ | l | l | l | p{5cm} |} + \hline + Day & Min Temp & Max Temp & Summary \\ \hline + Monday & 11C & 22C & A clear day with lots of sunshine. + However, the strong breeze will bring down the temperatures. \\ \hline + Tuesday & 9C & 19C & Cloudy with rain, across many northern regions. Clear spells + across most of Scotland and Northern Ireland, + but rain reaching the far northwest. \\ \hline + Wednesday & 10C & 21C & Rain will still linger for the morning. + Conditions will improve by early afternoon and continue + throughout the evening. \\ + \hline + \end{tabular} + \caption[Short caption for table]{Long caption for text \label{tab:table}} + \end{center} +\end{table} + +\section{References and Citation} +Here's we'll fill this section with some more interesting Star Trek text. +Run a manual sweep of anomalous airborne or electromagnetic readings. Radiation levels in our atmosphere have increased by 3,000 percent. Electromagnetic and subspace wave fronts approaching synchronization. What is the strength of the ship's deflector shields at maximum output? The wormhole's size and short period would make this a local phenomenon. Do you have sufficient data to compile a holographic simulation? + +Finally, we'll add a subfigure to demonstrate it's proper use. +Many people use the package~\verb+subfigure+ but this is in fact, quite wrong. +To begin, the~\verb+subfigure+ package has been deprecated, which one can check by going to \url{https://www.ctan.org/pkg/subfigure}{CTAN}. +Instead, everyone should be using~\verb+subcaption+, just as this class file is already doing. +Here, in~\cref{fig:xkcd}, we see two subfigures encapsulated in a larger figure environment. +Luckily, with our fancy referencing we have access to both~\cref{fig:ext,fig:ksp} using the same commands. +The key thing to note from~\cref{fig:ext} is that trustworthiness reaches a maximum for those using~\verb+.tex+. +\begin{figure}[htbp] + \centering + \begin{subfigure}[htbp]{0.5\textwidth} + \includegraphics[width=\textwidth]{figures/file_extensions.png} + \caption{File Extensions} \label{fig:ext} + \end{subfigure}~ %add desired spacing between images, e. g. ~, \quad, \qquad, \hfill etc. %(or a blank line to force the subfigure onto a new line) + \begin{subfigure}[htbp]{0.5\textwidth} + \includegraphics[width=\textwidth]{figures/orbital_mechanics.png} + \caption{Kerbal Space Program} \label{fig:ksp} + \end{subfigure} + \caption[XKCD]{Some words of wisdom from Randall Munroe} + \label{fig:xkcd} +\end{figure} + +\subsection{References} + +Lots of famous people tend to write famous papers~\cite{newton1999}. +Were they famous because or in-spite of their papers? +Regardless, they're famous now and we all should read them. +Certain people are so famous and do such great work that they invent a whole new field of study with a single paper~\cite{kalman1960,shannon1949} + +\section{Math} + +Here are some nice equations~\cref{prob_def,prob_def_constrained} +Run a manual sweep of anomalous airborne or electromagnetic readings. Radiation levels in our atmosphere have increased by 3,000 percent. Electromagnetic and subspace wave fronts approaching synchronization. What is the strength of the ship's deflector shields at maximum output? The wormhole's size and short period would make this a local phenomenon. Do you have sufficient data to compile a holographic simulation? +\begin{align} +\label{prob_def} +&\min_{s\subset W}\ J(s) = \sum_{i=1}^{l-1} H(s_j, s_{j+1}) \\ +&\max_{s\subset W}\ P_{tr}(s) = \prod_{i=1}^{l-1} P_{tr}(s_j, s_{j+1}) \nonumber +\end{align} + +Unidentified vessel travelling at sub warp speed, bearing 235.7. Fluctuations in energy readings from it, Captain. All transporters off. A strange set-up, but I'd say the graviton generator is depolarized. The dark colourings of the scrapes are the leavings of natural rubber, a type of non-conductive sole used by researchers experimenting with electricity. The molecules must have been partly de-phased by the anyon beam. +\begin{align} +\label{prob_def_constrained} +&\min_{s\subset W}\ J(s) = \sum_{i=1}^{l-1} H(s_j, s_{j+1}) \\ +&\text{subject to} \ P_{tr}(s)>\epsilon_{tr} \nonumber +\end{align} + +We're acquainted with the wormhole phenomenon, but this... Is a remarkable piece of bio-electronic engineering by which I see much of the EM spectrum ranging from heat and infrared through radio waves, et cetera, and forgive me if I've said and listened to this a thousand times. This planet's interior heat provides an abundance of geothermal energy. We need to neutralize the homing signal. + + diff --git a/Master/texmf-dist/doc/latex/thesis-gwu/tex/manual.tex b/Master/texmf-dist/doc/latex/thesis-gwu/tex/manual.tex new file mode 100644 index 00000000000..ade40a72556 --- /dev/null +++ b/Master/texmf-dist/doc/latex/thesis-gwu/tex/manual.tex @@ -0,0 +1,319 @@ +% !TEX root = ../thesis-sample.tex + +\chapter{Using this template} \label{chap:intro} + +This chapter is stuck among the others as a brief users' manual for this template. +The approach to this template is to result in \LaTeX~source code files (\texttt{.tex} files) that are as simple as possible. +It also tries to do as much as possible automatically so that the user does not have to spend a lot of effort trying to match the poorly documented ``guidelines'' provided by GWU or SEAS. +This is particularly useful for the first few pages, for example the title page, dedication, and abstract page, which are difficult to make in \LaTeX~and are supposed to go in a certain order. + +In addition to the description in this chapter, anyone may, of course, also look at the source code for this file, \texttt{thesis-sample.tex}. +That file contains all of the source for this \texttt{.pdf} in a single file, but it will work just as well with multiple input files combined with the \texttt{input} or \texttt{include} commands. +Generally, it is a better idea to use \texttt{include} as this will allow for selective compiling of a specific portion of your thesis, i.e. only a single chapter at a time. + +The final generic comment about this template is that it has been updated to take advantage of \LaTeX's capabilities to create documents with links in them. +Provided you are using a modern PDF viewer to view this document, you may have already noticed this. +It creates a list of bookmarks, which can be used to quickly navigate what may be a long document. +It also turns references within the text into links. +The best examples in this file are the entries in the Table of Contents. +Although the chapter and section names are shown in black (in accordance with the GWU guidelines), clicking on them does navigate to the start of the chapter, section, etc. + + +\section{General Usage} +The way to invoke usage of this template is to put +\begin{verbatim} +\documentclass{thesis-gwu.cls} +\end{verbatim} +at the beginning of your preamble. +This can also work if the \texttt{thesis-gwu.cls} file is not in the same directory as your \texttt{.tex} file. +To do so, just give the relative path. +\begin{verbatim} +\documentclass{./tex/thesis-gwu.cls} +\end{verbatim} + +Much like a usual article or report in \LaTeX, the user specifies the primary information about the document in the preamble with commands like +\begin{verbatim} +\author{Shankar Kulumani} +\chair{Taeyoung Lee} +\end{verbatim} +At the beginning of the document, the title page will automatically be created and inserted at the beginning of the document. +If you forget to declare any of the required fields, it will generate a title page with a message such as ``Insert an author!'' + +However, the template does a lot more in the preamble than just create a title page. +The preamble (that is, whatever comes before \texttt{begin\{document\}} in the primary \texttt{.tex} file) is also the place for the user to specify a dedication, any acknowledgments, a foreword, \textit{etc.} +This is done in a manner very similar manner to declaring the author, title, and so on. Suppose that someone wants to have a simple dedication ``To Mom'', the following command is all that is needed. +\begin{verbatim} +\dedication{To Mom} +\end{verbatim} +This will cause the document to have a dedication page with the +corresponding text. +If the \texttt{dedication} command is not present, there will not be a dedication page. +All the work of either having or not having a dedication has been compressed into a single command! +Things other than simple text \emph{are} allowed in the dedication, so feel free to put equations or whatever inside there. +There are a few more commands that can be used to customize the appearance of the dedication page, and also for the other preamble text pages, but that is left to~\cref{ssec:dedication}. + +\section{Front Matter} +The \LaTeX term ``frontmatter'' refers to all of the pages that occur before the beginning of the first chapter. +It is usually made clear to the reader because the pages in the front matter are numbered with lower-case Roman numerals instead of Arabic numerals. + +The present template, \texttt{thesis-gwu.cls} attempts to remove as much work associated with the front matter as possible. +The template inserts all of the front matter pages automatically, so that there is +not even a need to use a command like \verb+\maketitle+. +The first thing after \verb+\begin{document}+ should be the start of the first +chapter. + +\subsection{Identifiers} +The template is not able to read minds, of course, so there needs to be some way of inputting the relevant information. +This section covers how to specify the author, title, and so on. +For the most part, this works just like any other \LaTeX~document, but a dissertation has a few more identifiers than most documents (How many books or reports have a +committee?). +So there are a few extra commands provided by this template, and they work \emph{almost} exactly like the standard commands. + +\begin{table} + \caption{ \label{tab:identifiers} + List of all identifier commands} + \centering + \small + \begin{tabular}{l @{\hspace{16pt}} l @{\hspace{16pt}} p{6cm}} + \hline \hline + \textsc{Item} & \textsc{Usage} & \textsc{Comment} \\ + \hline + Author & \verb|\author{...}| + & Works as in standard \LaTeX \\ + Chair & \verb|\chair{...}| + & Name of chair \emph{without} any title or affiliation. This + appears only on the abstract page, and only if there is no + co-chair. \\ + Co-chair & \verb|\cochair{...}| + & Names of all co-chairs \emph{without} any titles or + affiliations. This appears only on the abstract page. Note + that by convention, it is not chair \emph{and} co-chair, but + just two co-chairs. \\ + Committee & \verb|\committee{...}| + & Formatted names of committee members \emph{with} the + appropriate titles and university names. This will appear + only on the title page. \\ + Department & \verb|\department{...}| + & Title of department of student \\ + Title & \verb|\title{...}| + & Works as in standard \LaTeX \\ + Year & \verb|\year=2012| + & Year that dissertation will be \emph{completed} \\ + \hline \hline + \end{tabular} +\end{table} + +A full list of the identifiers is given in Table \cref{tab:identifiers}. +You're free to adjust/delete these commands as desired. + + + +\subsection{Frontispiece and Copyright} + +By default, the template assumes that there should be a copyright page, and the copyright holder is the author. +To prevent the copyright page from appearing, use the command \verb|\hidecopyright|. +To assign the copyright to someone other than the author, use the following command. +\begin{verbatim} +\copyrightholder{Someone Else} +\end{verbatim} + + +\subsection{Text Pages} \label{ssec:dedication} +The handling of the first few pages after the title page is one of the best features of this template. +The pages that occur between the copyright page and the abstract page all consist of short pieces of text that are usually a single paragraph. +The text for each of these pages is set up using a command of the same name. +Generally, only one of the front matter pages is used. +\begin{verbatim} +\foreword{This is going to be the best dissertation ever.} +\end{verbatim} +Usually the contents of each of these pages will be longer than a single sentence, and thus it should be noted that each of these commands allows most types of \LaTeX~input. +For example, the following is perfectly acceptable input--at least as far as the template is concerned. +\begin{verbatim} +\foreword{This is going to be the \emph{best}. \\ + \begin{center} Really, really. \end{center}} +\end{verbatim} + +As I mentioned before, a given page will appear in the document if and only if the corresponding command is used. +The order in which the pages appear does not depend on the order the commands are used in the preamble. +You can also prevent the pages from appearing by using commands like \verb|\hideforeword|. + +The style of each page can also be set by the user. +By default, each page will appear with a bold, italic heading corresponding to the name +of the page. +However, there are five other formats, which can be controlled using an optional argument. +For example, the following command creates a dedication page with no heading (\textit{i.e.}~it does not say ``Dedication'' on the page) but with lines above and below the dedication text. +\begin{verbatim} +\dedication[4]{To Mom} +\end{verbatim} +A complete list of the available styles is given in \cref{tab:fronstyle}. +The style of each page can be set independently, but it is also possible to change which style is used by default. +\begin{verbatim} +\frontpagestyle{6} +\end{verbatim} +This would make all of the commands that were called without optional +inputs to create pages using style 6. + +\begin{table} + \caption{ \label{tab:fronstyle} + List of styles for frontmatter text pages} + \centering + \begin{tabular}{c @{\hspace{16pt}} p{8cm}} + \hline \hline + \textsc{Style} & \textsc{Description} \\ + \hline + 1 & Justified text with no header or lines \\ + 2 & Justified text with bold italic header and no lines \\ + 3 & Justified text, capitalized header, no lines \\ + 4 & Justified text with lines and no header \\ + 5 & Justified text with bold italic header and lines \\ + 6 & Justified text with capitalized header and lines \\ + other & Centered text with no header or lines \\ + \hline \hline + \end{tabular} +\end{table} + + + +\subsection{Lists of Things} \label{ssec:lists} +Suffice it to say that this template handles the Table of Contents appropriately, but this section is also meant to address the List of Figures, List of Tables, \textit{etc}. According to the guidelines, a corresponding list must appear if there is more than one figure, table, map, program, illustration, or appendix. +The template assumes that the dissertation will contain at least two figures and tables. +If, for example, there is only one figure, +\begin{verbatim} +\hidelistoffigures +\end{verbatim} +must be put in the preamble. +There are similar commands to hide/show all of the front matter pages. +These can be used at will as desired. + +\subsection{Glossary of Terms}\label{ssec:glossary} +Here is an example. +\Gls{linux} is a computer operating system, and its completely free and open. + +A \gls{matrix}, denoted \gls{M}. +Lots of \glspl{matrix}. +\Glspl{matrix} are a rectangular array of quantities. +No indexing, linking, or formatting: \glsentrytext{matrix}. +The identity \gls{matrix}['s] diagonal consists of ones. + +First use: \gls{filo}. +Next use: \gls{filo}. +Full form: \acrfull{filo}. + + +\subsection{Acronymns and Symbols}\label{ssec:acronymns} +The other type of list that can occur is for abbreviations of various types. +This is a somewhat convenient feature, particularly there are a lot of acronyms in the dissertation. +This template utilizes the \texttt{acronym} or \texttt{glossaries} packages, but eventually I would like to migrate to the use of \texttt{glossaries} which is continuing to be supported and deprecate the use of \texttt{acronym}, for now both are supported. + +\subsubsection{\texttt{acronymn} usage - try to avoid using this as it's not the best} +In the preamble put a command like the following. +\begin{verbatim} +\abbreviations{ + \acro{CFD}{Computational Fluid Dynamics} + \acro{LOA}{List of Abbreviations} + \acro{H2O}[$\mathrm{H_2O}$]{water}} +\end{verbatim} +This will define a bunch of abbreviations that can be used. +When you want to use one of the acronyms within the text, simply use the \verb|\ac| command to refer to the abbreviation you want. +This will automatically spell out what the abbreviation stands for on the first use and only print out the abbreviation on subsequent uses. + +\subsubsection{\texttt{glossaries} usage - much improved and more powerful} +In addition, you can utilize the much more powerful \texttt{glossaries} package. +You can define symbols, acronymns, or full glossary entries as desired. +Each acronymn is defined using the following: +\begin{verbatim} +\newacronym{crtb}{CRTBP}{Circular Restricted Three Body Problem} +\end{verbatim} +Here we can use an acronym, such as \gls{crtbp}. +Or display the full name, \gls{crtbp}. + +\section{Float environments} +There are many possible float enviornments, and this section will serve as an introduction and demonstration of some of them. +In addition, it offers the ability to ensure that this template actually follows the guidelines. + +\subsection{Figures}\label{ssec:figures} + +Here is a figure as shown in~\cref{fig:picard}. +Notice how we're using the fancy referencing offered by the \verb+cleveref+ package. +Instead of using the normal~\verb+\ref+ command we instead use~\verb+\cref+. +The magic of \LaTeX automatically figures out that the previous reference points to a figure while~\cref{ssec:figures} points to a section. + +\begin{figure} + \centering + \includegraphics[width=0.5\textwidth]{figures/picard_yes.jpg} + \caption[Damage report!]{Glad to have a thesis class\label{fig:picard}} +\end{figure} + +\subsection{Tables}\label{ssec:tables} + +Here's a table in~\cref{tab:table} + +\begin{table} +\begin{center} + \begin{tabular}{ | l | l | l | p{5cm} |} + \hline + Day & Min Temp & Max Temp & Summary \\ \hline + Monday & 11C & 22C & A clear day with lots of sunshine. + However, the strong breeze will bring down the temperatures. \\ \hline + Tuesday & 9C & 19C & Cloudy with rain, across many northern regions. Clear spells + across most of Scotland and Northern Ireland, + but rain reaching the far northwest. \\ \hline + Wednesday & 10C & 21C & Rain will still linger for the morning. + Conditions will improve by early afternoon and continue + throughout the evening. \\ + \hline + \end{tabular} + \caption[Short caption for table]{Long caption for text \label{tab:table}} + \end{center} +\end{table} + +\section{References and Citation} +Finally, we'll add a subfigure to demonstrate it's proper use. +Many people use the package~\verb+subfigure+ but this is in fact, quite wrong. +To begin, the~\verb+subfigure+ package has been deprecated, which one can check by going to \url{https://www.ctan.org/pkg/subfigure}{CTAN}. +Instead, everyone should be using~\verb+subcaption+, just as this class file is already doing. +Here, in~\cref{fig:xkcd}, we see two subfigures encapsulated in a larger figure environment. +Luckily, with our fancy referencing we have access to both~\cref{fig:ext,fig:ksp} using the same commands. +The key thing to note from~\cref{fig:ext} is that trustworthiness reaches a maximum for those using~\verb+.tex+. +\begin{figure}[htbp] + \centering + \begin{subfigure}[htbp]{0.5\textwidth} + \includegraphics[width=\textwidth]{figures/file_extensions.png} + \caption{File Extensions} \label{fig:ext} + \end{subfigure}~ %add desired spacing between images, e. g. ~, \quad, \qquad, \hfill etc. %(or a blank line to force the subfigure onto a new line) + \begin{subfigure}[htbp]{0.5\textwidth} + \includegraphics[width=\textwidth]{figures/orbital_mechanics.png} + \caption{Kerbal Space Program} \label{fig:ksp} + \end{subfigure} + \caption[XKCD]{Some words of wisdom from Randall Munroe} + \label{fig:xkcd} +\end{figure} + +\subsection{References} + +Lots of famous people tend to write famous papers~\cite{newton1999}. +Were they famous because or in-spite of their papers? +Regardless, they're famous now and we all should read them. +Certain people are so famous and do such great work that they invent a whole new field of study with a single paper~\cite{kalman1960,shannon1949} + +\section{Math} + +Here are some nice equations~\cref{prob_def,prob_def_constrained} +\begin{align} +\label{prob_def} +&\min_{s\subset W}\ J(s) = \sum_{i=1}^{l-1} H(s_j, s_{j+1}) \\ +&\max_{s\subset W}\ P_{tr}(s) = \prod_{i=1}^{l-1} P_{tr}(s_j, s_{j+1}) \nonumber +\end{align} + +Here's another equation. +\begin{align} +\label{prob_def_constrained} +&\min_{s\subset W}\ J(s) = \sum_{i=1}^{l-1} H(s_j, s_{j+1}) \\ +&\text{subject to} \ P_{tr}(s)>\epsilon_{tr} \nonumber +\end{align} + + + + + + diff --git a/Master/texmf-dist/doc/latex/thesis-gwu/tex/results.tex b/Master/texmf-dist/doc/latex/thesis-gwu/tex/results.tex new file mode 100644 index 00000000000..07949dc1103 --- /dev/null +++ b/Master/texmf-dist/doc/latex/thesis-gwu/tex/results.tex @@ -0,0 +1,19 @@ +% !TEX root = ../thesis-sample.tex + +\chapter{Another sample chapter}\label{chap:ipsum} + +This chapter has several paragraphs of random text. +This ensures our table of contents is correct and demonstrates how to use a multi-file \LaTeX document. + +\lipsum[1] + +\section{A section} +\lipsum[10] + +\subsection{A subsection} +\lipsum[9] + +\subsubsection{A subsubsection} +\lipsum[11] + + |