summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/relenc
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex/relenc')
-rw-r--r--Master/texmf-dist/doc/latex/relenc/reldemo.tex440
-rw-r--r--Master/texmf-dist/doc/latex/relenc/relenc.tex1285
2 files changed, 1725 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/relenc/reldemo.tex b/Master/texmf-dist/doc/latex/relenc/reldemo.tex
new file mode 100644
index 00000000000..c918a900308
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/relenc/reldemo.tex
@@ -0,0 +1,440 @@
+\documentclass{article}
+
+\usepackage{relenc}
+\usepackage[T1R,OT1]{fontenc}
+ % ot1enc.def is inputed since I still want OT1 to be the default
+ % encoding in this document.
+
+
+\makeatletter
+
+% General font parameters:
+\newdimen\demofontem \newdimen\demofontex \newskip\demofontspace
+
+ % This macro sets the font parameters for the current font, using
+ % default values if the \fontdimen values are too strange (probably
+ % because the font is a raw font not meant for typesetting).
+\def\setfontparams{%
+% \sbox{\letterbox}{a}% Make sure the font really is loaded (?)
+ \ifdim 0.1pt<\fontdimen6\font % Quad width
+ \setlength\demofontem{1em}%
+ \else
+ \demofontem=\f@size\p@
+ \fi
+ \ifdim0.1pt<\fontdimen5\font % x-height
+ \setlength\demofontex{1ex}%
+ \else
+ \demofontex=0.4\demofontem
+ \fi
+ \ifdim0.1pt<\fontdimen2\font % Interword space natural width
+ \setlength\demofontspace{\fontdimen2\font plus\fontdimen3\font
+ minus\fontdimen4\font
+ }%
+ \else
+ \setlength\demofontspace{0.2222\demofontem
+ plus0.1111\demofontem minus0.05555\demofontem
+ }%
+ \fi
+}
+
+% Generating the font table:
+\newcount\slotnbr \newcount\rownbr \newcount\colnbr
+\newdimen\thinlinesize \newdimen\thicklinesize \newdimen\squarewidth
+\newsavebox\letterbox
+\setlength\thinlinesize{0.24pt}
+\setlength\thicklinesize{0.75pt}
+\mathchardef\tablecolumns=16
+
+\def\linespreadstrut{\vrule height2.5\demofontex depth1.5\demofontex width0pt}
+\def\emptyrowrule{\rlap{\vrule height2.5\demofontex depth-2\demofontex
+ width\thinlinesize}\vrule height-1\demofontex depth1.5\demofontex
+ width\thinlinesize
+}
+\def\stdtext#1{{\normalfont#1}}
+\def\tttext#1{{\normalfont\ttfamily#1}}
+ % Used on things that should not be typeset in the demo font.
+
+\def\nextslot{%
+ \sbox{\letterbox}{\unhbox\letterbox
+ \hb@xt@\squarewidth{\hss\linespreadstrut\char\slotnbr\hss}%
+ \vrule width\thinlinesize
+ }%
+ \global\advance \slotnbr \@ne
+}
+\def\rowheading{%
+ \hb@xt@1.5\demofontem{\hss
+ \linespreadstrut
+ \stdtext{\strut\the\slotnbr}\hskip0.2\demofontem
+ }%
+}
+\def\makebodyrow{\colnbr=\z@
+ \sbox{\letterbox}{%
+ \rowheading
+ \vrule width\thicklinesize
+ }%
+ \loop
+ \nextslot
+ \advance \colnbr \@ne
+ \ifnum \tablecolumns>\colnbr \repeat
+ \box\letterbox
+}
+\def\emptybodyrow{%
+ \hbox{%
+ \sbox\letterbox{%
+ \colnbr=\z@
+ \loop
+ \hskip\squarewidth
+ \advance \colnbr \@ne
+ \ifnum \tablecolumns>\colnbr
+ \vrule width\thinlinesize height\demofontex depth\z@
+ \repeat
+ }%
+ \tabskip=\z@skip
+ \valign{\vfil##\vfil\cr
+ \rowheading\cr
+ \noalign{\vrule width\thicklinesize}%
+ \relax\offinterlineskip
+ \halign{\hfil##\hfil\cr \copy\letterbox\cr
+ \noalign{\vfill}\stdtext{\strut These slots are empty}\cr
+ \noalign{\vfill}\box\letterbox\cr
+ }\cr
+ \noalign{\vrule width\thinlinesize}%
+ \cr
+ }%
+ }%
+ \global\advance \slotnbr \tablecolumns
+}
+\def\bodyrow{%
+ \setbox\letterbox=\hbox{%
+ \colnbr=\z@
+ \penalty\@ne
+ \loop
+ \char\slotnbr
+ \advance \slotnbr \@ne %Note: Non-global advancement
+ \advance \colnbr \@ne
+ \ifnum \tablecolumns>\colnbr \repeat
+ \ifnum \@ne=\lastpenalty % Are all characters in the row missing?
+ \def\next{iffalse}% Yes
+ \else
+ \def\next{iftrue}% No
+ \fi
+ \expandafter
+ }%
+ \csname\next\endcsname % Will be either \iftrue or \iffalse.
+ \makebodyrow
+ \else
+ \emptybodyrow
+ \fi
+ \hrule height\thinlinesize
+}
+\def\toprow{%
+ \colnbr=\z@
+ \sbox{\letterbox}{%
+ \hb@xt@1.5\demofontem{\hss\linespreadstrut}%
+ \vrule width\thicklinesize
+ }%
+ \loop
+ \sbox{\letterbox}{%
+ \unhbox\letterbox
+ \hb@xt@\squarewidth{\hss\linespreadstrut
+ \stdtext{\the\colnbr}\hss
+ }%
+ \vrule width\thinlinesize
+ }%
+ \advance \colnbr \@ne
+ \ifnum \tablecolumns>\colnbr \repeat
+ \box\letterbox
+ \hrule height\thicklinesize
+}
+\def\MakeFontTable{%
+ \medskip
+ \setlength{\squarewidth}{1.6\demofontem}%
+ \hb@xt@\linewidth{\hss
+ \vbox{%
+ \tracinglostchars=\z@
+ \global\slotnbr=\z@
+ \toprow
+ \rownbr=\z@
+ \loop
+ \begingroup\bodyrow\endgroup
+ \advance \rownbr \@ne
+ \ifnum 16>\rownbr \repeat
+ }%
+ \hss
+ }
+ \par\bigskip
+}
+
+
+% Lists of symbols:
+
+% A list of symbols consists of a sequence of \do{<symbol>} units,
+% where <symbol> can be one (or possibly several) of the following:
+% a category 11 or 12 token, such as `a' or `!'; a \chardef control
+% sequence such as `\&'; a LaTeX symbol command such as \textsterling.
+% (You can actually use a lot of stupid things in a <symbol> and still
+% have it work, but don't be surprised if it won't for something
+% that does not fit the above description.)
+
+\newcommand\AddToList[2]{%
+ \relax % Can't hurt.
+ \ifx\relax#1
+ \def#1{\do{#2}}%
+ \else
+ \expandafter\def \expandafter#1\expandafter{#1\do{#2}}%
+ \fi
+}
+
+\def\OTOneBasicLettersListUC{%
+ \do{A}\do{B}\do{C}\do{D}\do{E}\do{F}\do{G}\do{H}\do{I}\do{J}\do{K}%
+ \do{L}\do{M}\do{N}\do{O}\do{P}\do{Q}\do{R}\do{S}\do{T}\do{U}\do{V}%
+ \do{W}\do{X}\do{Y}\do{Z}\do{\AE}\do{\OE}\do{\O}%
+}
+\let\TOneBasicLettersListUC=\OTOneBasicLettersListUC
+\AddToList\TOneBasicLettersListUC{\DH}
+\AddToList\TOneBasicLettersListUC{\DJ}
+\AddToList\TOneBasicLettersListUC{\L}
+\AddToList\TOneBasicLettersListUC{\NG}
+\AddToList\TOneBasicLettersListUC{\SS}
+\AddToList\TOneBasicLettersListUC{\TH}
+
+\def\OTOneBasicLettersListLC{%
+ \do{a}\do{b}\do{c}\do{d}\do{e}\do{f}\do{g}\do{h}\do{i}\do{j}\do{k}%
+ \do{l}\do{m}\do{n}\do{o}\do{p}\do{q}\do{r}\do{s}\do{t}\do{u}\do{v}%
+ \do{w}\do{x}\do{y}\do{z}\do{\ae}\do{\i}\do{\j}\do{\oe}\do{\o}%
+ \do{\ss}%
+}
+\let\TOneBasicLettersListLC=\OTOneBasicLettersListLC
+\AddToList\TOneBasicLettersListLC{\dh}
+\AddToList\TOneBasicLettersListLC{\dj}
+\AddToList\TOneBasicLettersListLC{\l}
+\AddToList\TOneBasicLettersListLC{\ng}
+\AddToList\TOneBasicLettersListLC{\th}
+
+\def\OTOneAccentsList{%
+ \do{\@firstofone}% This is a "no accent" accent.
+ \do{\`}\do{\'}\do{\^}\do{\~}\do{\"}\do{\H}\do{\r}%
+ \do{\v}\do{\u}\do{\=}\do{\.}\do{\b}\do{\c}\do{\d}%
+}
+\let\TOneAccentsList=\OTOneAccentsList
+\AddToList\TOneAccentsList{\k}
+
+\newcommand\ApplyListToList[3]{%
+ % The first list here, which is given as #1, should really be a list
+ % of one-parameter commands. The second list, which should be given
+ % as #2, should be a normal list of symbols. Each command of the first
+ % list is applied to the symbols in the second list. #3 is inserted
+ % after every such application.
+ \def\do##1{{\def\do####1{##1{####1}#3}#2}}%
+ #1%
+}
+
+\newcommand\MakeTOneAccentedTable{%
+ \medskip
+ \ApplyListToList{\TOneAccentsList}{%
+ \TOneBasicLettersListLC\par\TOneBasicLettersListUC\par
+ }{\-}%
+ \bigskip
+}
+\newcommand\MakeOTOneAccentedTable{%
+ \medskip
+ \ApplyListToList{\OTOneAccentsList}{%
+ \OTOneBasicLettersListLC\par\OTOneBasicLettersListUC\par
+ }{\-}%
+ \bigskip
+}
+
+
+\let\TOneLeftGlyphsListLC=\TOneBasicLettersListLC
+\AddToList\TOneLeftGlyphsListLC{ff}
+
+\let\OTOneLeftGlyphsListLC=\OTOneBasicLettersListLC
+\AddToList\OTOneLeftGlyphsListLC{ff}
+
+\newcommand\ListTimesList[3]{%
+ % This "generates" the Cartesian product of two lists: For each \do in
+ % the first list a copy of the second list appears, and for each \do
+ % in the second list the current element from the first list is
+ % inserted. As with \ApplyListToList, #3 is inserted at the end of each
+ % \do from the second list.
+ \def\do##1{{\def\do####1{##1####1#3}#2}}%
+ #1%
+}
+
+\newcommand\MakeTOnePairsTable{%
+ \medskip
+ \ListTimesList{\TOneLeftGlyphsListLC}{\TOneBasicLettersListLC\par}{%
+ \hskip\demofontspace
+ }%
+ \smallskip
+ \ListTimesList{\TOneBasicLettersListUC}{\TOneBasicLettersListLC\par}{%
+ \hskip\demofontspace
+ }%
+ \smallskip
+ \ListTimesList{\TOneBasicLettersListUC}{\TOneBasicLettersListUC\par}{%
+ \hskip\demofontspace
+ }%
+ \bigskip
+}
+
+\newcommand\MakeOTOnePairsTable{%
+ \medskip
+ \ListTimesList{\OTOneLeftGlyphsListLC}{\OTOneBasicLettersListLC\par}{%
+ \hskip\demofontspace
+ }%
+ \smallskip
+ \ListTimesList{\OTOneBasicLettersListUC}{\OTOneBasicLettersListLC\par}{%
+ \hskip\demofontspace
+ }%
+ \smallskip
+ \ListTimesList{\OTOneBasicLettersListUC}{\OTOneBasicLettersListUC\par}{%
+ \hskip\demofontspace
+ }%
+ \bigskip
+}
+
+
+\def\OTOneSymbolsList{\do{\textemdash}\do{\textendash}%
+ \do{\textexclamdown}\do{\textquestiondown}\do{\textquotedblleft}%
+ \do{\textquotedblright}\do{\textquoteleft}\do{\textquoteright}%
+ \do{\textdollar}\do{\textsterling}%
+}
+\let\TOneSymbolsList=\OTOneSymbolsList
+\AddToList\TOneSymbolsList{\guillemotleft}
+\AddToList\TOneSymbolsList{\guillemotright}
+\AddToList\TOneSymbolsList{\guilsinglleft}
+\AddToList\TOneSymbolsList{\guilsinglright}
+\AddToList\TOneSymbolsList{\quotedblbase}
+\AddToList\TOneSymbolsList{\quotesinglbase}
+\AddToList\TOneSymbolsList{\textasciicircum}
+\AddToList\TOneSymbolsList{\textasciitilde}
+\AddToList\TOneSymbolsList{\textbackslash}
+\AddToList\TOneSymbolsList{\textbar}
+\AddToList\TOneSymbolsList{\textbraceleft}
+\AddToList\TOneSymbolsList{\textbraceright}
+\AddToList\TOneSymbolsList{\textcompwordmark}
+\AddToList\TOneSymbolsList{\textgreater}
+\AddToList\TOneSymbolsList{\textless}
+\AddToList\TOneSymbolsList{\textperthousand}
+\AddToList\TOneSymbolsList{\textpertenthousand}
+\AddToList\TOneSymbolsList{\textquotedbl}
+\AddToList\TOneSymbolsList{\textsection}
+\AddToList\TOneSymbolsList{\textunderscore}
+\AddToList\TOneSymbolsList{\textvisiblespace}
+
+
+\newcommand\MakeOTOneSymbolsTable{\MakeSymbolsTable\OTOneSymbolsList}
+\newcommand\MakeTOneSymbolsTable{\MakeSymbolsTable\TOneSymbolsList}
+\newcommand\MakeSymbolsTable[1]{%
+ \begingroup
+ \def\do##1{\tttext{\string##1}&##1\cr}%
+ \tabskip=\hideskip
+ \halign to\linewidth{##\hfil \tabskip=\ht\strutbox&
+ \hfil##\hfil \tabskip=\hideskip\cr
+ \stdtext{\TeX\ code}&\stdtext{Symbol}\cr
+ #1%
+ }%
+ \endgroup
+ \par\bigskip
+}
+
+
+% Combining it all
+
+\newcommand\DemoTOneLaTeXFont[4]{%
+ \vfil\penalty0\vfilneg
+ \markright{\stdtext{Demo of \LaTeX\ font \ttfamily #1/#2/#3/#4}\hss}%
+ \begingroup
+ \usefont{#1}{#2}{#3}{#4}%
+ \setfontparams
+ \noindent\stdtext{\textbf{Font table}}\par
+ \MakeFontTable
+ \noindent\stdtext{\textbf{Accents/letters table}}\par
+ \MakeTOneAccentedTable
+ \noindent\stdtext{\textbf{Pairs tables}}\par
+ \MakeTOnePairsTable
+ \noindent\stdtext{\textbf{Symbols table}}\par
+ \MakeTOneSymbolsTable
+ \ifx \TOneDemoText\@undefined \else
+ \medskip\TOneDemoText\medskip
+ \fi
+ \endgroup
+}
+\newcommand\DemoOTOneLaTeXFont[4]{
+ \vfil\penalty0\vnegfil
+ \markright{\stdtext{Demo of \LaTeX\ font \ttfamily #1/#2/#3/#4}\hss}%
+ \begingroup
+ \usefont{#1}{#2}{#3}{#4}%
+ \setfontparams
+ \noindent\stdtext{\textbf{Font table}}\par
+ \MakeFontTable
+ \noindent\stdtext{\textbf{Accents/letters table}}\par
+ \MakeOTOneAccentedTable
+ \noindent\stdtext{\textbf{Pairs tables}}\par
+ \MakeOTOnePairsTable
+ \noindent\stdtext{\textbf{Symbols table}}\par
+ \MakeOTOneSymbolsTable
+ \ifx \OTOneDemoText\@undefined \else
+ \medskip\OTOneDemoText\medskip
+ \fi
+ \endgroup
+}
+\newcommand\DemoRawTeXFont[1]{\begingroup
+ \font\demofont=#1\relax
+ \demofont
+ \setfontparams
+ \MakeFontTable
+ \endgroup
+}
+
+\makeatother
+
+\pagestyle{myheadings}
+
+\begin{document}
+\errorcontextlines=999\relax
+
+You should at least read Appendix C of the package documentation
+before viewing this example, but if you prefer not to then I must at
+least point out that the fonts in the \texttt{zcm} family are mainly
+\texttt{cmr10} that has been completed with various ``faked''
+characters. As a result, many of the characters does not look very
+good and some look downright ugly, but there is no particular harm in
+that since the \texttt{zcm} fonts are not intended to be used in any
+serious typesetting anyway.
+
+The first font in the \texttt{zcm} family---the \texttt{T1R}\slash
+\texttt{zcm}\slash\texttt{m}\slash\texttt{n} font---has a coding scheme
+identical to that used for fonts in the \texttt{T1} encoding. It
+shows the default setup for the \texttt{T1R} encoding.
+
+The font table shows the contents of each slot. The accents/letters
+table shows the result of the non-accented letters as they are and
+their appearence after having been subjected to each accenting command
+in turn. The pairs tables shows all the ligatures and the symbols
+table finally shows the symbol commands and their effect.
+
+\bigskip
+\DemoTOneLaTeXFont{T1R}{zcm}{m}{n}
+
+The second font in the \texttt{zcm} family---the \texttt{T1R}\slash
+\texttt{zcm}\slash\texttt{m}\slash\texttt{a} font---has four extra
+ligatures: ct, fj, ffj, and st. These appear in the font table at
+positions 128, 130, 131, and 161. Despite the fact that four of the
+characaters that were used for making accented letters in the
+\texttt{T1R}\slash\texttt{zcm}\slash\texttt{m}\slash\texttt{n} font are
+missing however, the accents/letters table for the \texttt{T1R}\slash
+\texttt{zcm}\slash\texttt{m}\slash\texttt{a} font display the same accented
+letters as the ditto table for the \texttt{T1R}\slash\texttt{zcm}\slash
+\texttt{m}\slash\texttt{n} font did. Under the \texttt{T1} encoding,
+the result would instead have been that some of the accented letters
+would incorrectly have been replaced by the ligatures.
+
+The pairs tables show that the four extra ligatures work as ligatures
+and the symbols table looks exactly as for the \texttt{T1R}\slash
+\texttt{zcm}\slash\texttt{m}\slash\texttt{n} font.
+
+\bigskip
+\DemoTOneLaTeXFont{T1R}{zcm}{m}{a}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/relenc/relenc.tex b/Master/texmf-dist/doc/latex/relenc/relenc.tex
new file mode 100644
index 00000000000..4fda9e8d641
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/relenc/relenc.tex
@@ -0,0 +1,1285 @@
+\documentclass[a4paper]{article}
+
+\usepackage{doc}
+% Stuff more or less from ltxdoc.cls:
+\DeclareFontShape{OT1}{cmtt}{bx}{n}{<-> ssub * cmtt/m/n}{}
+\DeclareFontShape{OT1}{cmss}{m}{it}{<->ssub*cmss/m/sl}{}
+\DeclareFontFamily{OMS}{cmtt}{\skewchar\font'60}
+\DeclareFontShape{OMS}{cmtt}{m}{n}{<-> ssub * cmsy/m/n}{}
+\DeclareFontShape{OMS}{cmtt}{bx}{n}{<-> ssub * cmsy/b/n}{}
+
+\setlength{\textwidth}{355pt}
+\addtolength\marginparwidth{30pt}
+\addtolength\oddsidemargin{20pt}
+\addtolength\evensidemargin{20pt}
+
+\makeatletter
+\def\cmd#1{\cs{\expandafter\cmd@to@cs\string#1}}
+\def\cmd@to@cs#1#2{\char\number`#2\relax}
+\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}}
+\makeatother
+
+\setcounter{StandardModuleDepth}{1}
+
+
+\usepackage{2sidedoc}
+
+\newcommand\B{\penalty300\relax}
+\DeclareTextFontCommand{\textcmtt}{\usefont{OT1}{cmtt}{m}{n}}
+\newcommand\package[1]{\textsf{#1}}
+\CodelineNumbered
+
+
+\makeatletter
+\newenvironment{cmdusage}{%
+ \setbox\z@=\vbox\bgroup
+ \color@begingroup
+ \hsize=0.75\textwidth
+ \parindent=-1em%
+ \everypar={\hangindent=1em\hangafter=0}%
+ \rightskip=\z@ \@plus 1fil\relax
+ \let\par\@@par
+}{%
+ \color@endgroup
+ \egroup
+ \@@par
+ \medskip
+ \noindent
+ \fbox{\usebox\z@}\@@par
+ \medskip
+}
+\makeatother
+
+\newcommand*{\marg}[1]{%
+ \begingroup\MacroFont\char`\{\endgroup
+ \meta{#1}%
+ \begingroup\MacroFont\char`\}\endgroup
+}
+\newcommand*{\oarg}[1]{%
+ \begingroup\MacroFont\char`\[\endgroup
+ \meta{#1}%
+ \begingroup\MacroFont\char`\]\endgroup
+}
+
+\MakeShortVerb{\|}
+
+
+\title{The \package{relenc} package}
+\author{Lars Hellstr\"om%
+ \thanks{E-mail: \texttt{Lars.Hellstrom@math.umu.se}}%
+}
+
+\begin{document}
+
+\maketitle
+
+\tableofcontents
+
+\section{Motivation}
+\label{Motivation}
+%
+This paper is about some shortcomings that, in my humble opinion,
+exists in the way \LaTeX\ handles fonts. I also point out a way in
+which these shortcomings can be overcome.
+
+The primary problem is ligatures, but as there are a few different
+ligature concepts that are of interest, let me begin with specifying
+my terms. A \emph{ligature} is a sequence of characters
+(almost always letters) that have been given an appearance somewhat
+different from the one the characters would have if simply put side to
+side, almost always because they would otherwise not look very
+pleasing to the eye. Despite this difference in appearence, it is
+still meant to be read as the entire character sequence, not as a
+completely new character. The canonical example of this is the `fi'
+ligature.
+
+In \TeX\ fonts, there is a special mechanism to implement this, and
+everything that is implemented using this mechanism will be
+called \emph{font ligatures}. It is almost always the case however,
+that some font ligartures are not ligatures as defined above, but
+simply a handy way to type characters that are hard or impossible to
+type using a standard keyboard; the canonical example of this is the
+`\texttt{--}' (two hyphens) to `--' (endash) conversion that is
+present in most \TeX\ fonts. Such nonproper ligatures will be called
+\emph{syntactic ligatures}, and proper ligatures will sometimes be
+called \emph{aestetic ligatures} to stress their origin.
+
+A \emph{font-dependent command} in \LaTeX\ is a command whose
+actions depend directly or indirectly on which font is the current. (I
+would not consider a command |\foo| defined by
+\begin{verbatim}
+ \def\foo{\char65 }
+\end{verbatim}
+as a font-dependent command since it always does the same thing.
+The results need not always be identical, but that is because
+the command is executed under different conditions.) An example of a
+font-dependent command is |\"|, which is (roughly) |\accent 127| when
+the current font is \texttt{OT1}-encoded and |\accent 4| when the
+current font is \texttt{T1}-encoded. (The dependence is indirect since
+the command directly depends on a macro which is set during the font
+selection process, but there is a dependence.)
+
+For the purposes of this paper, if would also suffice to define a
+font-dependent command as a command that is defined by some of the
+commands |\DeclareTextCommand|, |\ProvideTextCommand|,
+|\DeclareTextSymbol|, |\Declare|\B|Text|\B|Command|\B|Default|,
+|\Provide|\B|Text|\B|Command|\B|Default|, or |\Declare|\B|TextAccent|.
+\LaTeX\ documentation uses the term `encoding-specific command' for
+these, but for reasons that will soon be appearent, that term would be
+somewhat inappropriate here.
+
+Thus, with these definitions taken care of, it is now time to get to
+the point.
+
+The recommended latin font encoding these days is the
+\texttt{T1}/`Cork'\slash`Extended \TeX\ text'
+encoding, and this is rightfully so. It is clearly superior to the old
+\texttt{OT1} encoding, as it adds more than a hundred accented
+characters to those which can be used to form a word that \TeX\ can
+automatically hyphenate, but there is at least one case in which the
+\texttt{OT1} encoding is preferable. This case is when the font has many
+ligatures.
+
+In the \texttt{T1} encoding, there are seven slots available
+for ligatures, and these have been assigned to the `ff', `fi', `fl',
+`ffi', `ffl', `IJ', and `ij' ligatures. Since all slots have been
+assigned to something, there is no place to put an additional ligature,
+even if it is needed. Thus the conclusion is that if a font is to be
+\texttt{T1} encoded, it cannot contain any ligatures in addition to the
+aforemensioned; to put it the other way, if a font design requires the
+presence of a ligature other than the aforemensioned, it cannot be
+\texttt{T1} encoded.
+
+In the \texttt{OT1} encoding, there are only five slots assigned to
+ligatures, but there are 128 unassigned slots that can be used for
+anything the font designer wants. Thus having more than five ligatures
+in an \texttt{OT1} encoded font is no problem, but a recourse to using
+\texttt{OT1} is not a very good option, as it leaves the hyphenation
+problem unsolved. The solution, then, would seem to be the creation of
+a new encoding, and part of it will, but this will not be quite
+sufficient for reasons I will shortly describe.
+
+For the moment though, let us, as an intellectual experiment, assume
+that we shall solve this problem with \texttt{T1} having too few slots
+for ligatures by creating a new encoding for a hypothetical font that
+would need more than seven ligatures. Let us also assume that the new
+encoding shall be a modified version of the \texttt{T1} encoding, where
+some accented characters will have been left out to make room for the
+ligatures. Finally, let us assume that we want to be as international
+as possible and include as many of the accented characters as we can
+squeeze in. These are three simple assumptions, and there are good
+reasons for all of them.
+
+How \emph{many} slots do we need to assign to ligatures, then? This
+varies, of course, between different font families, but it might vary
+\emph{even more} between fonts in the same family. The \texttt{it}
+shapes might need a few more than the \texttt{n} shapes, while the
+\texttt{sc} shapes might not need any at all (`\textsc{fi}' (|fi|) and
+`\textsc{f{}i}' (|f{}i|) look exactly the same in most font families).
+Instead, there are some accents which are harder to put on in the
+\texttt{sc} shapes (in many font families the ring on \textsc{a} in
+\textsc{\r{a}} should touch the main letter; this is not what the
+default definition does), so it appears that the optimal thing to do
+would be to have slightly different encodings for different fonts, even
+if they belong to the same family. This is theoretically no problem;
+\TeX's macro facilities are flexible enough to allow user level
+commands that do different things in different fonts. It becomes,
+however, a problem to do this in a reasonably universal way, so that
+the macros produced work in general and not only for a single font
+family.
+
+Standard \LaTeX\ has a mechanism for doing precisely this. Using the
+commands |\DeclareTextCommand|, |\DeclareTextSymbol|,
+|\DeclareTextAccent|, or one of their relatives, one can give a
+definition of a command that is used with one particular font encoding
+and not with any other. The problem with using this mechanism here is
+that one might have to have the normal and italic variants declared
+as having different encoding attributes (as well as different
+shapes), so one would have to either device a whole new set of font
+changing commands or redefine \LaTeX's own high-level font changing
+commands (such as |\textit|) to change encoding as well as shape or
+series. Neither alternative is good, and one can expect several
+incompability problems to arise for both of them.
+
+A better solution starts with recognizing that there are actually two
+different `encoding' concepts that can be found here. One is the
+attribute by which fonts are selected in \LaTeX, the other is the
+actual layout of a font. I will call this latter concept a
+\emph{coding scheme} and reserve \emph{encoding} for the former.
+(Formally, one may start by defining a \emph{slot} to be an integer in
+the range 0--255 and a \emph{glyph} to be a pattern (usually
+recognicable as a letter, digit, punctuation mark, or some other part
+of written language, but it need not always be). A coding scheme can
+then be defined as a mapping of slots to classes of glyphs. A font
+complies to a particular coding scheme if, for every slot $n$ in the
+domain of the coding scheme, the glyph occupying slot $n$ of the font
+is a member of the class that the encoding scheme maps $n$ to. But I
+digress.) As far as I know, there is no strict defintion of what an
+encoding is, apart from the operational given in \cite{fntguide} as
+something that is part of the specification of a font. (The canonical
+source for such a definition would be \cite{encguide}, but that paper
+is, according to its author, ``still in an embryo state''.) In font
+discussions, an encoding is often taken to imply a specific coding
+scheme, and many encoding definition files seem to be all about listing
+the coding scheme, but is this implication suitable? I would claim that
+in this case, it is not.
+
+A more constructive definition would be to see an encoding as a
+specification of which font-dependent commands are available to the
+author. An encoding definition file, on the other hand, is a
+specification of the interface between \LaTeX\ macros and the
+information in a \TeX\ font. It does not matter to the author whether
+\H{o} is |\char174| of the current font, generated as |\accent125o|
+by \TeX, or whatever. The only thing that matters is that when the
+author types |Erd\H{o}s|, it comes out as Erd\H{o}s.
+
+Consequently, there is really no need for the font-dependent commands in
+\LaTeX\ to do the same thing for any two fonts with the same encoding
+attribute, it is merely the case that standard \LaTeX\ does not offer
+an interface for defining font-dependent commands in any other way. The
+natural remedy for this then, would be to write a package which offers
+such an interface. This is what I have done; the package is called
+\package{relenc} and this paper is its documentation. Its usage and
+implementation are described in the following sections, and the
+appendices describe some accompanying files.
+
+I shall however conclude this section by an attempt to elaborate the
+above view on what an encoding is, or perhaps rather, what it should be.
+
+The encoding property of a font is a set of rules that determines how
+the author's manuscript is interpreted---the input character
+\texttt{q} for example has not the same interpretation in a
+\texttt{T1} encoded font (where it is the letter `q') as in an
+\texttt{OT2} encoded font (where it is a cyrillic letter whose closest
+latin equivalent is the Czech `\v{c}'). An encoding specification should
+therefore be a formalization of an agreement between the font designer
+on one hand and the author on the other---it specifies which rules each
+side must comply with and which results that can then be expected. An
+example of the author's rules may be to refrain from writing \TeX\ code
+like |\char 166|, because the font designer may have an option on what
+to put in that slot. If the author breaks the rules, he or she may find
+that the manuscript produced contains text whose meaning is not the same
+if typeset with two different fonts even if they do have the same
+encoding property. In practice, the author's rules for the standard text
+encodings are pretty much the same as the rules on how write \TeX\ code
+we find in every elementary book on the subject, so they are hardly new
+to us.
+
+An example of the font designer's rules may be to put an exclamation
+mark in slot 33, so that \texttt{!} actually print as one, or to
+include a font ligature that converts two consequtive hyphens to an
+endash, so that |--| actually will print as an endash, which the
+author by tradition expects it to do. If the font designer breaks the
+rules then authors who follow their rules might find that they do not
+get the right results anyway and such a font designer is likely to get
+complaints from authors about this. In practice however, the font
+designer rules are often vaugely specified if specified at all and
+hence there are gray areas for most encodings where there are no rights
+and wrongs. The \texttt{OT1} encoding is probably the one most plauged
+by these; the dollar versus sterling problem (an excellent example of
+how changing the glyph of a single slot many completely alter the
+interpretation of a text) is a classic. One of my intentions with
+writing this text is to work for that these gray areas are shrunken
+or even completely eliminated, although I do not think there is
+anything that can be done for the \texttt{OT1} encoding---its
+irregularities are much too well known and exploited.
+
+Now if an encoding is (a formalization of) an agreement, how do the
+parties agree to it? On the font designer's side this happens when
+the font designer gives a font a specific encoding by writing a font
+definition file that defines that font with that encoding. On the
+author's side this happens when the author selects a font with that
+encoding property.
+
+So far the informal description, now it is time to get to the
+formalization. Which exactly are the rules for the author and for the
+font designer? This varies between different encodings, but only in
+the details. The areas the encoding specification must cover can be
+listed and are:
+\begin{itemize}
+ \item
+ Which input characters that can be used directly to produce
+ some of the font's glyphs in the output and what they will
+ generate. This pertains to the author, who shouldn't use other
+ input characters. The allowed ones do however have well-defined
+ results.
+ \item
+ Which coding scheme the font must comply with. The pertains to
+ the font designer. There are no direct restrictions on the use of
+ slots not listed in this coding scheme.\footnote{There may be
+ indirect restrictions, see below.}
+ \item
+ Which the required syntactic ligatures are. This pertains to both
+ author and font designer. The author cannot trust any in addition
+ to these, the font designer must include them.\footnote{It could
+ well be that there \emph{should not} be any syntactic ligatures
+ in addition to these. I know of no situation where there would be
+ an advantage in adding syntactic ligatures.}
+ \item
+ Which the font-dependent commands are and what they will generate.
+ This pertains to the author in the same manner as does the input
+ character rules.
+ \item
+ Which the required font dimensions are and what they stand for.
+ This pertains to both the author and the font designer in the same
+ manner as does the syntactic ligature rules.\footnote{Even though
+ very few physical authors access any font dimensions, the same
+ does not hold for packages, and these also count as authors in
+ this context.}
+\end{itemize}
+After these have been specified, the grey areas should be very small
+indeed! There are however a few additional twists that must be sorted
+out.
+
+If the required coding scheme listed in the encoding specification does
+not cover all the 256 slots, then one must be aware that in particular
+the required syntactic ligatures, but also the font-dependent commands,
+may impose some restrictions on the font's coding scheme in
+addition to those expressed by the given coding scheme that the font
+must comply with. These restrictions are then of the form that a
+glyph from a specific class must be assigned to some slot, but the
+font designer may freely choose exactly which slot. Thus any single
+slot not specified by the required coding scheme may be used for just
+about anything.
+
+The use of the \package{relenc} package requires that the following
+area has to be added the ones listed above.
+\begin{itemize}
+ \item
+ The font designer must see to that for every combination of a
+ variable command and a font, there is a variant that will give the
+ specified result.\footnote{The terms \emph{variable command} and
+ \emph{variant} are explained in Subsubsection~\ref{Tekn.bakgr.}.}
+\end{itemize}
+% With encodings that depend on the \package{relenc} package (I call
+% such encodings \emph{relaxed}),
+Hyphentation patterns do also offer theoretical problems to the use of
+the \package{relenc} package, as these refer explicitly to the coding
+scheme of the font. Problems with these can however not result in
+anything worse than bad hyphenation, so the interpretation of a text
+should not be affected. It is furthermore the case that in practice
+the problems can often be avoided (see Subsection~\ref{Hyph}).
+
+Finally, there are two font parameters---|\hyphenchar| and
+|\skewchar|---that do explicitly relate to the coding scheme of the
+font and which are not stored in the font itself. It is possible that
+the value of at least one of these should be specified in an
+encoding specification, but that particular question is not of
+immediate interest to the \package{relenc} package, as \LaTeX\ itself
+already provides the font designer with the ability to set these for
+each font individually (using the sixth argument of
+|\Declare|\B|Font|\B|Shape|).
+
+
+
+\section{Usage}
+
+\subsection{Author usage}
+
+All the author has to do to use fonts with a relaxed encoding, as
+opposed to fonts with for example the \texttt{T1} encoding, is to
+include the command
+\begin{verbatim}
+ \usepackage{relenc}
+\end{verbatim}
+in the preamble and load the encoding definition file, for example
+using the \package{fontenc} package. It is however important that the
+\package{relenc} package is loaded \emph{before} the encoding
+definition file, as the latter uses commands defined in the former.
+
+
+\subsection{Font designer usage}
+
+For a font designer, it is important to know at least in broad
+outline how the mechanisms made available through the \package{relenc}
+package work, which is why this subsection starts with a description of
+that. There is however a convention followed in the remainder of this
+paper that the reader should be aware of and this convention has to do
+with how control sequences are written.
+
+In this paper, there are many control sequences with ``strange''
+names, meaning names that mixes letters and non-letters in pretty
+arbitrary ways, so that these names cannot be read as one normally
+reads \TeX\ code. Therefore thin spaces are inserted around names of
+control sequences, regardless of whether a space character at that
+place would automatically be skipped by \TeX\ while it is reading the
+code or not. A space character that is really meant to ``be there'' will
+be written as a visible space (\textvisiblespace). All control sequences
+will, as usual, be written with an opening backslash, but this
+backslash is not part of the name of the control sequence.
+
+Excepted from the above convention about spaces is the actual \TeX\ %
+source code for that appear in Section~\ref{Implementation} and onwards
+(the lines of this is numbered, so it should be easily distinguishable)
+and some pieces of ``alternative'' source code in the same sections.
+These exceptions should be easy to recognise for the readers who are
+interested in that particular material.
+
+
+\subsubsection{Some technical background}
+\label{Tekn.bakgr.}
+
+The main feature added by the \package{relenc} package is that of
+the \emph{variable commands}; it is through making commands variable
+that their definition may depend on which font is the current. This is
+not how \TeX\ would see it, since the definition of a variable
+command (as a \TeX\ control sequence) actually does not change after
+the command has been made variable! Rather, a variable command is a
+macro which expands to different things depending on which the current
+font is.
+
+With overwhelming probability, this is something you have encountered
+before, although you might not have realised it. Under \LaTeXe, all
+accenting commands and all commands for letters other than a--z (such
+as \ae, \o, and \ss) are like this. The only difference lies is what
+will affect the eventual outcome of the command. The \LaTeXe\ kernel
+only supports dependence on which the current encoding is. The variable
+command concept makes dependence on the current family, series, and
+shape possible as well.
+
+Both systems are quite similar in that they rely on |\csname| lookups.
+What happens to, for example, the command |\foo| is the following:
+First it gets |\string|ed. This converts the single control sequence token
+to the sequence of character tokens which would form the name of the
+command; in this case to |\|, |f|, |o|, and |o|. Then a piece of text
+is put in front of that character sequence, and finally the result of
+that is taken to be the name of a new control sequence. This process
+mainly generates control sequnces with very peculiar names; if the bit
+of text is, say, |T1| then the new control sequnce will be |\T1\foo|
+(this is \emph{one} control sequence). Such names are impossible to type
+without a lot of trickery, but that is deliberate, since they should
+not be accessed directly. If the control sequence thus formed is defined,
+then the definition of that control sequence will be taken as the intended
+definition of the control sequence |\foo| it all started with.
+
+The systems differ in what pieces of text they put before the name of
+the command and what they do if the control sequence formed is not
+defined. The \LaTeXe\ kernel starts by using the name of the current
+encoding as the prefix text. If that fails, it tries with |?| instead.
+If that fails too, an error message is issued. The variable commands
+defined using the \package{relenc} package have a more general approach.
+
+This approach relies on the concept of a \emph{search path}, about
+the structure of which more will be said later. For the moment, it is
+sufficient to say that it consists of a sequence of \emph{blocks} of
+text. The looking up process consists of a loop in which the following
+is done: The first block is removed from the search path, and the text
+it contains is used to form the name of a control sequence, as described
+above. The rest of the search path is saved away as the \emph{remaining
+search path}. If the control sequence formed is defined, then it is used
+as the definition of the command, and if it is not, then the process
+is repeated. When the process is repeated however, it starts by
+removing the first block of the remaining search path, which is the
+second (or third, or fourth, depending on which iteration of the loop
+is the current) block of the entire search path, while once again
+saving the rest as the new remaining search path. Not until the
+entire search path has been scanned in this way will an error message
+be issued.
+
+This means arbitrarily many possibilities can be tested in searching
+for the definition of a command, but about six is probably a
+realistic upper bound on how many there will be in practical
+applications. In many cases it will be even fewer.
+
+What has been mensioned so far does not mean there necessarily is any
+dependence on the current font, but it opens the possibility. The
+trick is that the pieces of text, which are the blocks in the search
+path, can contain not only characters but also macros (and other
+expandable stuff)---as long as everything eventually expands to
+character tokens, everything is fine. The point here is that the
+control sequences that contains the names of the current encoding,
+family, series, and shape---|\f@encoding|\footnote{For technical
+reasons, it is probably better to use \cs{cf@encoding} instead. See page
+\pageref{Why cf@encoding} for a discussion of this.}, |\f@family|,
+|\f@series|, and |\f@shape| respectively---are of this kind. Thus
+making the definition of a variable command depend on these attributes
+of the current font is simply a matter of making the corresponding
+control sequences part of the texts in the search path.
+
+The above might give the impression that the variable commands are
+ment to be used instead of the encoding-specific commands of standard
+\LaTeX, but that is not the case. What actually happens is that the
+control sequences of type |\T1\foo| that the \LaTeXe\ kernel looks up
+will themselves be variable commands. This means that to \LaTeX, the
+commands in a relaxed encoding whose definitions depend on the current
+font are just normal encoding-specific commands, even though they do a
+lot of peculiar things before they actually generate any typeset
+material, but on the other hand \LaTeX\ doesn't care what they do, as
+long as it finds a definition.\footnote{It also saves me a lot of
+work, since I won't have to bother with trying to make the variable
+commands robust---\LaTeX\ already makes the encoding-specific commands
+robust.}
+
+This has probably been a bit abstract, so an explicit example might be
+in place. Let's say that the current encoding is \texttt{T1R} (this is
+an existing relaxed encoding), the current family is \texttt{zcm}
+(this is an example family\footnote{The \texttt{zcm} font family is
+described in Appendix \ref{zcm-family}.}), the current series is
+\texttt{m}, and the current shape is \texttt{n}. Furthermore let's say
+the user has just issued the font-dependent command |\foo| (this is not
+really a font-dependent command, but let's assume it is). What will happen?
+
+\begin{enumerate}
+\item
+ The actual control sequence |\foo| causes the \LaTeXe\ kernel to start
+ look for a definition. It first tries |\T1R\foo|, then |\?\foo|, and
+ if neither is defined then an error message is given. The case of
+ interest here is that |\T1R\foo| is defined, because then the
+ \LaTeXe\ kernel is content and \TeX\ will act as if |\T1R\foo| was
+ issued instead.
+\item
+ If the final definition of |\foo| is to depend on family\slash
+ series\slash shape then |\T1R\foo| must be a variable command. The
+ first thing which happens then is that \package{relenc} starts
+ looking for a search path to use. Search paths are stored in
+ macros, and the names of these macros are formed in a manner
+ similar to that in which the other lookup names here are formed.
+
+ The two macros which can contain the search path are
+ |\T1R/zcm-path| and |\T1R-path| (these are still only single
+ control sequences), and they are tried in that order. If none of
+ them exists, then an error message is given. The second of the two
+ is common to all fonts using the \texttt{T1R} encoding and must be
+ defined by the encoding designer. A font designer can choose to
+ define a search path of his or hers own, and that will then be named
+ as the first of the two above. A family specific search path
+ completely overrides the encoding specific (the latter is in that
+ case not even considered), but in many cases the encoding specific
+ will do just fine.
+
+ Let's assume that |\T1R/zcm-path| is defined and consists of
+ \begin{verse}
+ |{|\meta{enc}|/|\meta{family}|/|\meta{series}|/|\meta{shape}|}|\\
+ |{|\meta{enc}|/|\meta{family}|/?/|\meta{shape}|}|\\
+ |{|\meta{enc}|/|\meta{family}|/?/?}|\\
+ |{|\meta{enc}|/?/?/?}|
+ \end{verse}
+ (Each block is written on a separate line. The text of the block is
+ everything between (but not including) the braces, which act as
+ delimiters of the block. \meta{enc}, \meta{family}, \meta{series}, and
+ \meta{shape} denote the \LaTeX\ macros listed above which contain the
+ names of the current encoding, family, series, and shape respectively.)
+\item
+ Once the search path is found, it is scanned. In this particular
+ case this means that the control sequences |\T1R/zcm/m/n\foo|,
+ |\T1R/zcm/?/n\foo|, |\T1R/zcm/?/?\foo|, and |\T1R/?/?/?\foo| are
+ tried in that order. If none of them is defined, an error message is
+ given, but let's assume that |\T1R/zcm/?/?\foo| is defined and
+ neither |\T1R/zcm/m/n\foo| nor |\T1R/zcm/?/n\foo| are. This
+ corresponds to the case that there is a definition of the variable
+ command that is specific for the family, but not any specific for
+ the shape or series.
+\item
+ The final stage is that |\T1R/zcm/?/?\foo| gets executed.
+\end{enumerate}
+
+There are now only a few more things to sort out before the
+description of the commands a font designer has available can commence.
+Firstly, control sequences like the above |\T1R/zcm/?/?\foo|, that hold
+an actual definition of a variable command, are called \emph{variants}
+of that command. The processing during the scan of the search path that
+is connected to one block in the search path is called a \emph{step} in
+that scan.
+
+Secondly, there is another thing which might affect the definition of a
+command, viz.\ the first argument of the command. Commands for which
+the first argument is checked before the actual definition is determined
+are called \emph{composite commands}, or are said to be \emph{composed}.
+The alternative definitions of them are called \emph{compositions}. Each
+composition is used for exactly one value of the argument, and the main
+composite command contains a definition which is used for all values for
+which there is no composition.
+
+This too is a mechanism that is present in the \LaTeXe\ kernel, what
+\package{relenc} does is that it introduces some commands to make
+variable commands composed or vice versa. Very much like variable
+commands, composite commands rely on |\csname| lookups, but instead of
+adding a prefix to the command name, the composition mechanism adds a
+suffix consisting of a hyphen (|-|) and the first token of the first
+argument (as a precaution, this token is |\string|ed beforehand, to
+convert it to character tokens if it was not already).
+
+An example of this, from the \texttt{T1} encoding, is the acute accent
+command |\'|. The command that actually is composed is |\T1\'|, which
+holds the definition of |\'| in the \texttt{T1} encoding, and one of
+its compositions are |\\T1\'-a|. This is a macro which expands to the
+letter \'{a}, which is the expected result of |\'{a}|. There is no
+composition for the argument |\ae| in the \texttt{T1} encoding, so if
+the user issues |\'{\ae}| the lookup mechanism finds nothing and the
+default definition is used, yielding `\'{\ae}'. Had there been a
+composition however, it would have called |\\T1\'-\ae|. Cases like
+these are why the |\string|ing precaution is necessary; most
+commands generate errors when \TeX\ meets with them inside a |\csname|
+\textellipsis\ |\endcsname| pair.
+
+With that description completed, it is now time to describe the usage
+and purpose of the commands available to the font designer. It should
+perhaps be pointed out that most of them are about defining variants
+of commands, as making a command variable lies within the powers of
+the encoding designer.
+
+
+\subsubsection{Defining variants of font-dependent commands}
+
+Among the arguments of every variant defining command is the sequence
+\marg{encoding}\B\marg{family}\B\marg{series}\B\marg{shape},
+which specifies which variant of a command is being defined. The
+arguments should consist of letters and\slash or figures, but any
+combination of these parameter fields might be left empty. A field
+left empty signifies that the intended variant may be used regardless
+of what value that attribute may take. Thus |{T1R}{zcm}{m}{n}| is used
+when defining a variant specific to this encoding, family, series, and
+shape, whilst |{T1R}{zcm}{}{}| is used when defining a variant that
+applies for every font in the \texttt{T1R}-encoded \texttt{zcm} family.
+Technically, a field left empty will be filled with a question mark.
+Thus the |{T1R}{zcm}{}{}| variant of |\foo| will be stored in the
+control sequence |\T1R/zcm/?/?\foo|.
+
+\DescribeMacro\DefineTextSymbolVariant
+\DescribeMacro\DefineTextAccentVariant
+|\DefineTextSymbolVariant| and |\DefineTextAccentVariant| are the two
+simplest commands for defining a variant. The former makes the variant
+output a single character, whose slot in the font is given as the
+argument \meta{slot}. The latter should be used for variants of accent
+commands, as an accenting command is precisely what it defines. The
+character used for the accent is the one with slot number
+\meta{slot}. |\DefineTextSymbolVariant| and
+|\DefineTextAccentVariant| parallell the commands |\DeclareTextSymbol|
+and |\DeclareTextAccent| respectively that are found in standard
+\LaTeX.
+
+\DescribeMacro\DefineTextCommandVariant
+If the above are not sufficient for the definition of a variant of
+some command (they are not, for example, general enough to define any
+of the accents put \emph{under} letters), complete generality is
+offered through the |\DefineTextCommandVariant| command, which can be
+used to define any \TeX\ macro. (It consists simply of a |\gdef| to
+the control sequence that stores the variant in question.) This means
+the \meta{parameter text} should be formated as for the |\def|
+command, without any surrounding braces or such. Also notice that every
+token in the \meta{parameter text} counts, including spaces and end of
+lines.
+
+Apart from the arguments mensioned, all the above commands have an
+argument \meta{cmd}. This is the name of the base font-dependent command of
+which you want to define a variant. It is not the name of the actual
+variable command, so you should write |\foo|, not |\T1R\foo|.
+The syntaxes of the commands are as follows:
+\begin{cmdusage}
+ |\DefineTextSymbolVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{slot}
+
+ |\DefineTextAccentVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{slot}
+
+ |\DefineTextCommandVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \meta{parameter~text}~|{|~\meta{replacement~text}~|}|
+\end{cmdusage}
+\medskip
+
+\DescribeMacro\NewTextCommandVariant
+\DescribeMacro\RenewTextCommandVariant
+\DescribeMacro\ProvideTextCommandVariant
+\package{relenc} does also offer some |\newcommand|-style commands for
+defining variants of font-dependent commands, for font designers who prefer
+that. They do offer some additional functionality, as they can make
+commands which take an optional argument, but I am not currently aware
+of any font-dependent command that uses this feature. One reason the
+feature is offered is that variable command processing comes before
+optional argument processing, hence if a variable font-dependent command
+can have an optional argument then all its variants must be able to cope
+with that argument when it is present.
+
+Technically the commands boil down to an application of
+|\newcommand|, |\renewcommand|, or |\providecommand| respectively
+(the starred forms, to be exact). Thus you may get error messages
+if the variant is already defined or not defined, depending on which
+command you use. As the error messages are the standard \LaTeX\ %
+error messages, they may be somewhat confusing. Still, a somewhat
+confusing error message may be better than none at all.
+\begin{cmdusage}
+ |\NewTextCommandVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \oarg{numargs} \oarg{default} \marg{replacement text}
+
+ |\RenewTextCommandVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \oarg{numargs} \oarg{default} \marg{replacement text}
+
+ |\ProvideTextCommandVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \oarg{numargs} \oarg{default} \marg{replacement text}
+\end{cmdusage}
+\medskip
+
+
+\subsubsection{Defining variants of compositions}
+\label{Var. of comp.}
+
+As compositions can be variable, there are commands for defining
+variants of them. The situation here is simpler than for font-dependent
+commands in general since compositions cannot have any arguments,
+consequently there is no need to provide such a large variety of
+definition commands as for defining command variants.
+
+\DescribeMacro\DefineTextCompositionVariant
+\DescribeMacro\DefineTextCompositionVariantCommand
+The most important is |\DefineTextCompositionVariant| which
+corresponds to |\DefineTextSymbolVariant|---it makes a variant which
+simply typesets one of the characters in the font. The most general
+command is |\DefineText|\B|Composition|\B|VariantCommand| which defines
+the variant to be a parameterless macro without other restictions.
+
+\DescribeMacro\DefineTextUncomposedVariant
+A special, but probably rather common macro to define a variant of a
+composition to be, is the macro consisting of the noncomposite
+definition applied on the argument for the composition, because
+defining the variant this way is probably the easiest way to free a slot
+in the font for other purposes. Hence there is a special command for
+doing this: |\DefineTextUncomposedVariant|. It resembles the other
+two, but there is of course no argument that gives the definition of
+the variant and there is a special restriction, namely that
+the \meta{encoding} argument must not be empty!
+
+The arguments of these commands are as for the commands for defining
+variants of font-dependent commands, except for one designated
+\marg{argument}. This is the argument which is passed to the
+font-dependent command that corresponds to the current composition---the
+composition of which a variant is to be defined.
+
+\begin{cmdusage}
+ |\DefineTextCompositionVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{argument} \marg{slot}
+
+ |\DefineTextCompositionVariantCommand| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{argument} \marg{replacement text}
+
+ |\DefineTextUncomposedVariant| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{argument}
+\end{cmdusage}
+
+
+\subsubsection{Defining compositions of variants}
+\label{Comp av var}
+%
+Things can be done the other way round too---a variant of a font-dependent
+command may have compositions. These compositions are then completely
+independent of any compositions of the base font-dependent command. Unlike
+compositions of a font-dependent command (which must be \emph{declared}
+in the encoding definition file and are common to all fonts in a
+particular encoding), compositions of a variant can be \emph{defined}
+whenever a variant can be defined. Thus making compositions of variants
+lies within the powers of the font designer.
+
+\DescribeMacro\DefineTextVariantComposition
+\DescribeMacro\DefineTextVariantCompositionCommand
+There are two commands for defining compositions of variants:
+|\Define|\B|Text|\B|Variant|\B|Composition| and
+|\Define|\B|Text|\B|Variant|\B|Composition|\B|Command|. The difference
+between them is simply that the latter command defines the composition
+to be a macro with the given replacement text, while the former defines
+it to be a chardef token for the given slot. What is more interesting is
+what these commands do if the variant they are to make a composition of
+is not defined, because in this case they define the default definition
+to be a macro that resumes the scan of the search path. This means that
+the font designer can choose to specify some compositions early in the
+search path and others later---and perhaps more importantly---can give
+special definitions for some compositions early in the search path
+without having to copy the default definition to that level.
+
+As it happens, the names of the control sequences, in which the
+definitions of compositions of variants and variants of compositions
+respectively are stored, are slightly different (a backslash appears
+at different positions). Hence it is possible to have both for exactly
+the same \meta{encoding} \meta{family} \meta{series} \meta{shape}
+\meta{argument} combination for a composition of variant and variant
+of composition without having them overwriting each other, although
+there is hardly any point in having things set up this way.
+
+\begin{cmdusage}
+ |\DefineTextVariantComposition| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{argument} \marg{slot}
+
+ |\DefineTextVariantCompositionCommand| \marg{cmd}
+ \marg{encoding} \marg{family} \marg{series} \marg{shape}
+ \marg{argument} \marg{replacement text}
+\end{cmdusage}
+
+
+\subsubsection{Setting the family search path}
+
+Setting the family search path is pretty straightforward: The search
+path is the last argument, encoding and family in question the two
+other. A useful feature here is that inside the search path argument,
+|@| will be a letter and all spaces and newlines are ignored. This
+means the example search path from Subsubsection \ref{Tekn.bakgr.} can
+be set even by a command call as spaced out as the following
+\begin{verbatim}
+ \SetFamilySearchPath{T1R}{zcm}{
+ { \cf@encoding / \f@family / \f@series / \f@shape }
+ { \cf@encoding / \f@family / ? / \f@shape }
+ { \cf@encoding / \f@family / ? / ? }
+ { \cf@encoding / ? / ? / ? }
+ }
+\end{verbatim}
+and even if it appears in the preamble of a document (this is handy when
+debugging a font family).
+
+Search paths \emph{must} be set using the |\SetFamilySearchPath| or
+|\SetEncoding|\B|SearchPath| commands, otherwise the case that no
+definition of a variable command is found cannot be handled
+correctly, with the effect that \TeX\ gets hung in an infinite loop.
+
+\begin{cmdusage}
+ |\SetFamilySearchPath| \marg{encoding} \marg{family}
+ \marg{search~path}
+\end{cmdusage}
+
+
+\subsubsection{Where to put it all}
+%
+One topic that has not been delt with above is where the font designer
+is to put all these commands for defining variants and setting search
+path. In my opinion, there is only one possible place---the font
+definition file\footnote{I am well aware of the rules for which
+commands may be used in font definition files that are described in
+\cite{fntguide}. I have however chosen to disregard from these rules
+in the case of commands defined by the \package{relenc} package, as
+this case could hardly have been foreseen by the prescribers of these
+rules.}. This is also the logical place to put the commands,
+since this is the file in which the font designer describes his or her
+font family to \LaTeX. In particular, one cannot expect full
+functionality if the commands are put in a package, since it is
+perfectly possible to select a font without using a standard package
+for this.
+
+Of course, definition commands can also appear in an encoding
+definition file and anything that can appear in an encoding definition
+file may also appear in a package file, even though packages containing
+such code are often of a rather special nature.
+
+% There is however a complication of a technical nature with using
+% commands from the \package{relenc} package in font definition files.
+% Most of the commands defined in the \package{relenc} package assume
+% that the value of the \TeX\ parameter |\escapechar| is $92$, denoting
+% the backslash character (|\|). This is normally the case in \LaTeX,
+% but unfortunately this is not always the case when a font definition
+% file is loaded. \LaTeX\ locally sets |\escapechar| to $-1$ during some
+% important operations, most notably the loading of a new font done in
+% |\define@newfont|, and it is often at this time that font definition
+% files get loaded.
+%
+% To work around this, include the line
+% \begin{verbatim}
+% \begingroup \escapechar=`\\
+% \end{verbatim}
+% somewhere in every font definition file using commands from the
+% \package{relenc} package and put it before the first such command; also
+% include the line
+% \begin{verbatim}
+% \endgroup
+% \end{verbatim}
+% somewhere after the last such command. This temporarily resets
+% |\escapechar| to its normal value. I believe the group is necessary
+% (and it doesn't harm), since the value of |\escapechar| is not
+% neccessarily $-1$ at the time a font definition file is loaded. Sigh.
+%
+% IMHO, the best way to fix this would be to change \LaTeX\ itself so
+% that it doesn't change |\escapechar| at this particular
+% time\footnote{One could easily achieve the same results using a
+% combination of \cs{expandafter}s and \cs{@gobble}s. This would also
+% have the positive effect that backslashes will appear where one is
+% used to see them in the tracing messages \TeX\ writes out if
+% \cs{tracingcommands} or \cs{tracingmacros} are positive, instead of
+% being missing inside a neighbourhood of every font change.}, but that
+% is of course for the \LaTeX3 project team to decide.
+
+
+\subsection{Encoding designer usage}
+%
+The encoding designer's work in making a relaxed encoding is very
+much like the work in making a normal encoding. There are only two
+additional steps: It must be decided which commands and compositions
+that should be variable, and an encoding search path must be set. Both
+of these are more a matter of planning than writing \TeX\ code, but it
+seems best to treat the coding first.
+
+Each of the commands for declaring a variable font-dependent command or
+composition corresponds to a command for declaring a non-variable
+font-dependent command which is part of standard \LaTeX, as is shown in the
+following table. The correspondence is not one to one, but it is pretty
+close.
+
+\begin{center}
+ \small\DeleteShortVerb{\|}
+ \begin{tabular}{|ll|}
+ \hline
+ Standard declaration command& Variable declaration command%
+ \\[-0.9\ht\strutbox]
+ \hrulefill&\hrulefill\\
+ \relax\MakeShortVerb{\|}|\DeclareTextCommand|&
+ \relax|\DeclareTextVariableCommand|\\
+ \relax|\DeclareTextCommand|&
+ \relax|\DeclareTextVariableCommandNoDefault|\\
+ \relax|\ProvideTextCommand|&
+ \relax|\ProvideTextVariableCommand|\\
+ \relax|\DeclareTextSymbol|&
+ \relax|\DeclareTextVariableSymbol|\\
+ \relax|\DeclareTextAccent|&
+ \relax|\DeclareTextVariableAccent|\\
+ \relax|\DeclareTextComposite|&
+ \relax|\DeclareVariableTextComposition|\\
+ \relax|\DeclareTextCompositeCommand|&
+ \relax|\DeclareVariableTextComposition|\\
+ \hline
+ \end{tabular}
+\end{center}
+
+\DescribeMacro\DeclareTextVariableSymbol
+\DescribeMacro\DeclareTextVariableCommand
+\DescribeMacro\ProvideTextVariableCommand
+\DescribeMacro\DeclareTextVariableAccent
+The difference between on one hand the commands |\Declare|\B|Text|\B
+|Variable|\B|Symbol|, |\Declare|\B|Text|\B|Variable|\B|Command|,
+|\Provide|\B|Text|\B|Variable|\B|Command|, and |\Declare|\B|Text|\B
+|Variable|\B|Accent| and their non-variable counterparts on the other is
+that the font-dependent command they declare will become a variable
+command, while the definitions given will be used to define the
+encoding-level variant of the command. The arguments are exactly the
+same as for the commands' non-variable counterparts of standard \LaTeX.
+
+\DescribeMacro\DeclareTextVariableCommandNoDefault
+The |\DeclareTextVariableCommandNoDefault| command only declares a
+font-dependent command and makes it variable, but does not define any of
+its variants. This can actually be useful if one is writing an encoding
+that is a relaxed version of another encoding, such as the \texttt{T1R}
+encoding, since many commands will have the same encoding-level
+definition in both encodings. It is then possible to include the name of
+that other encoding in the search path, so that the same control
+sequence will hold the definition of a command in two different
+encodings.
+
+\DescribeMacro\DeclareVariableTextComposition
+The |\DeclareVariableTextComposition| command declares a composition of
+a command, like |\Declare|\B|Text|\B|Composite| or
+|\DeclareTextCompositeCommand|, and makes that composition variable.
+But it is also like |\Declare|\B|Variable|\B|Text|\B|CommandNo|\B|Default|
+in that it does not define any variant of the composition. To define a
+variant, one of the commands in Subsection \ref{Var. of comp.} must be
+used as well\footnote{I am not sure that this is a good way to organise
+it. Perhaps there should be commands combining these functions.}.
+|\DeclareVariableTextComposition| takes three arguments: the command,
+the encoding, and the argument for which a composition is to be
+declared.
+
+\begin{cmdusage}
+ |\DeclareTextVariableSymbol| \marg{cmd} \marg{encoding}
+ \marg{slot}
+
+ |\DeclareTextVariableCommand| \marg{cmd} \marg{encoding}
+ \oarg{arguments} \oarg{default} \marg{replacement~text}
+
+ |\DeclareTextVariableCommandNoDefault| \marg{cmd} \marg{encoding}
+
+ |\ProvideTextVariableCommand| \marg{cmd} \marg{encoding}
+ \oarg{arguments} \oarg{default} \marg{replacement~text}
+
+ |\DeclareTextVariableAccent| \marg{cmd} \marg{encoding}
+ \marg{slot}
+
+ |\DeclareVariableTextComposition| \marg{cmd} \marg{encoding}
+ \marg{argument}
+\end{cmdusage}
+\bigskip
+
+\DescribeMacro\SetEncodingSearchPath
+This is very much like |\SetFamilySearchPath|; the main difference to
+setting a family search path is that a relaxed encoding \emph{must} set
+its encoding search path.
+
+\begin{cmdusage}
+ |\SetEncodingSearchPath| \marg{encoding} \marg{search~path}
+\end{cmdusage}
+
+\medskip
+
+Now to the part which is not coding. As noone, at the time this is
+written, is particularly experienced in the creation of relaxed
+encodings, this is not a guide of how to do that. This is only a
+collection of some observations I made when I created the
+\texttt{T1R} encoding and the \package{relenc} package.
+
+\begin{itemize}
+ \item
+ When making a relaxed encoding: If you mainly want to free some
+ slots, so that you can include some new set of glyphs (for example
+ additional ligatures) in the font, the obvious place to start is to
+ reduce the number of slots that are assigned to compositions, by
+ implementing these in a variable way.
+ \item
+ When relaxing a composition, there are two ways of doing this:
+ making the composition variable, or making the command variable
+ and defining a composition of some variant. The cost (i.e., the
+ number of special definitions you have to make) is connected to
+ different things in these methods.
+
+ In the case of a composition of a variant, there is a cost
+ connected to having a composition. In the case of a variable
+ composition, the cost is rather connected to not using the default
+ definition for the composition. In the usual case that one either
+ uses a special glyph for a composition or uses the default
+ definition of the accenting command, this means that composition of
+ variant is cheaper if a minority of the compositions uses the
+ default definition and variable composition is cheaper if a
+ majority uses the default definition.
+ \item
+ In some cases, the default definition of an accenting command
+ tends to be suitable for some font families, but inappropriate
+ for others. An example from the \texttt{OT1} encoding is that the
+ definition of |\c| starts by looking at the \emph{height} (!!!) of
+ the character it is to put a cedilla under. If the height is
+ exactly $1\,\textrm{ex}$ then the |\accent| primitive is used,
+ otherwise the accent is put in place using a |\vtop| construction.
+ This works fine (I suppose, trusting DEK to have known what he was
+ doing) for fonts with idealized heights and depths of characters,
+ such as the Computer Modern family of fonts, but is a pure waste
+ of time if the heights and depths are computed from the bounding
+ boxes of the glyphs (like \textit{fontinst} \cite{fontinst} does).
+
+ The conclusion of all this is that it might be a good idea to
+ make accenting commands that have such a specific default definition
+ variable, regardless of how any compositions of these commands might
+ be implemented, so that font designers can override the definitions
+ in case they want to.
+
+\end{itemize}
+
+Apart from this, there is not much advice I can give. It is however
+likely to be a good idea to try to make a specification of the
+encoding---like described in Section \ref{Motivation} or in some other
+way, detailed or only in loose sketches---before starting to do the
+coding.
+
+
+\subsection{Power user commands}
+%
+This subsection treats some commands that may be useful to advanced
+users of the \package{relenc} package (this includes all font and
+encoding designers); in any case, the novice author users can do
+perfectly well without using the commands described here.
+
+\subsubsection{Debugging assistance}
+%
+\DescribeMacro\ShowVariantSearchResult
+As the way from user level command to definition given is quite long
+if the command is variable, there are many instances in which things
+can go wrong. |\ShowVariantSearchResult| may help in sorting out what
+exactly happened. Its primary function is to print the contents of
+all internal variables in \package{relenc} on the terminal and then
+wait for a command, just like after the primitive \TeX\ command |\show|.
+As an extra service, |\ShowVariantSearchResult| also prints the current
+encoding, family, series, and shape.
+
+As most of the processing in \package{relenc} is done in \TeX's mouth,
+there is not very much left to show. The most important piece of data
+there is is the \emph{remaining search path}. This is the part of the
+search path that was \emph{not} scanned in looking for a definition;
+by comparing it to the whole of the search path used, one can
+determine at which stage a definition was found. The other thing shown
+is the definition of |\RE@first@search@item|, which normally is
+defined to be a parameterless macro that expands to the first block
+in the search path most recently used. There are however two cases
+when it is not: (i) If a definition was found in the first stage
+of the most recent search, |\RE@first@search@item| is not altered.
+(ii) If the search has been restarted (see Subsubsection \ref
+{Comp av var}) then |\RE@first@search@item| is a macro with a
+parameter.
+
+Despite these reservations, |\ShowVariantSearchResult| provides about
+all the information there is to get about what a search has found. It
+might also be instructive if you want to understand the inner workings
+of the \package{relenc} package in more detail.
+
+\begin{cmdusage}
+ |\ShowVariantSearchResult|
+\end{cmdusage}
+
+Should |\ShowVariantSearchResult| not give you enough information, you
+can of course always set |\tracingmacros| to 1 and |\tracingcommands|
+to 2 for the time it takes to execute the command you are trying to
+debug, this will give you the whole picture of what \package{relenc}
+does. Before attempting this drastic action however, you should
+familiarise yourself with the implementation of the \package{relenc}
+package.
+
+
+\subsubsection{The `define first' mechanism}
+%
+The `define first' mechanism, which has not been mensioned until now
+because it is not really related to anything else in the package, is
+something very few users should ever have to bother with. It can
+however speed up the typesetting process, as demonstrated in Table
+\ref{Tab:Tid}.
+
+\begin{table}
+ \begin{center}
+ \DeleteShortVerb{\|}
+ \begin{tabular}{|rr@{.}lr@{.}lr@{.}l|}
+ \hline
+ &\multicolumn{6}{c|}{Default encoding}\\[-0.9\ht\strutbox]
+ &\multicolumn{6}{c|}{\hrulefill}\\
+ & \multicolumn{2}{c}{\texttt{OT1}}&\multicolumn{2}{c}{\texttt{T1}}&
+ \multicolumn{2}{c|}{\texttt{T1R}}
+ \\[-0.9\ht\strutbox]
+ & \multicolumn{2}{c}{\hrulefill}& \multicolumn{2}{c}{\hrulefill}&
+ \multicolumn{2}{c|}{\hrulefill}\\
+ \parbox[c]{0.3\columnwidth}{Time taken using \texttt{T1}}&
+ 253&4\,s& 197&5\,s& 255&2\,s\\[1ex]
+ \parbox[c]{0.3\columnwidth}{Time taken using \texttt{T1R}\\
+ (DFM on, no FSP)}&
+ 339&7\,s& 349&5\,s& 294&2\,s\\[2ex]
+ \parbox[c]{0.3\columnwidth}{Time taken using \texttt{T1R}\\
+ (DFM off, no FSP)}&
+ 446&4\,s& 458&3\,s& 400&5\,s\\[2ex]
+ \parbox[c]{0.3\columnwidth}{Time taken using \texttt{T1R}\\
+ (DFM off, has FSP)}&
+ 334&4\,s& 350&9\,s& 293&2\,s\\[2ex]
+ \parbox[c]{0.3\columnwidth}{Time taken using \texttt{T1R}\\
+ (DFM on, has FSP)}&
+ 316&7\,s& 327&5\,s& 269&9\,s\\[2ex]
+ \hline
+ \end{tabular}%
+ \MakeShortVerb{\|}
+ \end{center}\medskip
+
+ \begingroup\footnotesize \parindent=1em
+ DFM = Define First Mechanism
+
+ FSP = Family Search Path. The family search path used was
+ optimised to examine only the levels at which there actually
+ existed some variant.
+
+ The `default encoding' in this table is the encoding whose
+ encoding definition file was read in last. As explained in
+ \cite{ltoutenc}, this means that all commands declared in that
+ encoding will execute somewhat faster when that encoding is the
+ current.
+
+ The test text used consisted of all non-accented letters declared
+ in the \texttt{T1} encoding (a--z, as well as \ae, \ss, \i, and a
+ few others) in both upper and lower case, as they are as well as
+ accented with every accent command available (|\`|, |\'|, |\^|, |\~|,
+ |\"|, |\H|, |\r|, |\v|, |\u|, |\=|, |\.|, |\b|, |\c|, |\d|, and
+ |\k|). These 32 lines were then repeated 100 times, to reduce the
+ relaive amount of time taken to start the process.\par
+ \endgroup
+
+ \caption{A comparision of typesetting speed}\label{Tab:Tid}
+\end{table}
+
+What the define first mechanism (DFM) does, when it is active, is
+that if a definition is not found in the first step of the search
+path scan and a definition is found in some later step, then that
+definition is copied to the control sequence scanned in the first step.
+Thus the next time that the same command is issued, the scan of the
+search path will find a definition in the first step.
+
+This can speed up the search considerably, but there is a price to pay:
+More control sequnces gets defined, meaning more of \TeX's memory is
+being used for storing definitions of variable commands.\footnote{Or
+so it would appear \textellipsis\ Some things I've recently learnt
+about how \TeX's internal tables work has made me wonder about whether
+it really takes more memory, so I am currently not sure. Perhaps
+someone competent in the area of \TeX's memory management will
+volunteer to sort things out for me?} If you run out of memory while
+typesetting a document with the DFM on, turning it off will lower the
+memory requirements. If your \TeX\ is generally low on memory however,
+you should probably not be using relaxed encodings at all, since the
+basic deal of the entire package is to loosen the restrictions on fonts
+for a particular encoding by increasing the number of control sequences
+needed for the typesetting process.
+
+But these differences should be seen for what they really are,
+differences in speed for one of the many things \TeX\ have to do to
+typeset something. \TeX\ does no linebreaking during the tests in
+Table \ref{Tab:Tid} (hence no hyphentaing either), does not read any
+input after the first five seconds (the entire text is generated through
+expanding macros), has a very simple job pagebreaking, and so forth.
+In addition, the percentage of letters generated through font-dependent
+commands is much greater in the test text than what one would find in
+a normal \TeX\ manuscript. This circumstance also reduces the effect
+that the tabulated differences in speed will have on the overall
+typesetting speed for a normal \TeX\ manuscript.
+
+If you have not noticed that your document is being typeset slower due
+to the fact that the encoding used is not the encoding whose definition
+file was read in last, then chances are you would not notice any drop
+in speed if it was typeset using a relaxed encoding either.
+
+\medskip
+
+\DescribeMacro\ActivateDefineFirst
+\DescribeMacro\DeactivateDefineFirst
+The DFM is turned on and off using the commands
+|\ActivateDefineFirst| and |\DeactivateDefineFirst|, none of which
+have any parameters. As it is currently implemented, the activation
+state of the DFM is affected by grouping, but the defining it does
+is global.
+
+\begin{cmdusage}
+ |\ActivateDefineFirst|
+
+ |\DeactivateDefineFirst|
+\end{cmdusage}
+
+
+% The implementation
+% \part{\texttt{relenc.dtx}}
+\DocInput{relenc.dtx}\Finale
+
+
+\appendix
+
+\part*{The \texttt{T1R} encoding}
+\addcontentsline{toc}{part}{The \texttt{T1R} encoding}
+\DocInput{t1renc.dtx}\Finale
+
+\part*{The \texttt{zcm} example font family}
+\addcontentsline{toc}{part}{The \texttt{zcm} example font family}
+\DocInput{t1rzcm.fdd}\Finale
+
+
+\begin{thebibliography}{99}
+%
+\bibitem{ltoutenc}
+ Johannes Braams, David Carlisle, Alan Jeffrey, Frank Mittelbach,
+ Chris Rowley, Rainer Sch\"opf: \texttt{ltoutenc.dtx} (part of the
+ \LaTeXe\ base distribution).
+%
+\bibitem{fontinst}
+ Alan Jeffrey, Rowland McDonnell (manual), Sebastian Rahtz,
+ Ulrik Vieth: \emph{The fontinst utility} (v\,1.8),
+ \texttt{fontinst.dtx}, in CTAN at \texttt{ftp:/\slash
+ ftp.tex.ac.uk\slash tex-archive\slash fonts\slash utilities\slash
+ fontinst\slash}\textellipsis
+%
+\bibitem{fntguide}
+ \LaTeX3 Project Team: \emph{\LaTeXe\ font selection},
+ \texttt{fntguide.tex} (part of the \LaTeXe\ base distribution).
+%
+\bibitem{encguide}
+ Frank Mittelbach [et al. ?]: \texttt{encguide.tex}. To appear as
+ part of the \LaTeXe\ base distribution. Sometime. Or at least, that
+ is the intention.
+%
+\end{thebibliography}
+
+
+\end{document}