summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex')
-rw-r--r--Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex543
1 files changed, 543 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex b/Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex
new file mode 100644
index 00000000000..d4a29962fc6
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/jacow/annexes-Letter.tex
@@ -0,0 +1,543 @@
+%
+% !TeX spellcheck = en_US
+%
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX A:\endgraf FORMATTING OF AUTHORS AND AFFILIATIONS}\vspace*{\baselineskip}]
+
+\flushcolsend
+
+The names of authors, their organizations/affiliations
+and postal addresses should be grouped by affiliation and
+listed in \SI{12}{pt} upper- and lowercase letters. The name of
+the submitting or primary author should be first, followed
+by the coauthors, alphabetically by affiliation. If the
+author list for a given affiliation spans multiple lines,
+please be sure to break the line in a manner that does not
+split the author’s initials from the author’s last name. This
+is easily done by placing unbreakable spaces between the
+initials and last name. The affiliation name and address
+are also best kept together on the same (but not necessarily
+separate) line, wherever possible. (See, for example,
+the entry for GSI in the following). In cases where authors
+have multiple affiliations, the secondary affiliation is
+inserted below the author/primary affiliation listing and is
+indicated with a superscript, as shown in the following.
+
+
+Footnotes on the title and author lines may be used for
+acknowledgments and e-mail addresses, using a non-numeric
+sequence of characters (\textsuperscript{*}, \textsuperscript{†},
+\textsuperscript{‡}, \textsuperscript{§}, \textsuperscript{\P}
+as generated by \LaTeX's \verb|\footnote| command).
+
+For examples of the preferred formatting of authors and
+affiliations, please consult the following list of JACoW
+collaboration members.
+
+For manuscripts submitted by large collaborations with
+potentially many tens of authors and where, additionally,
+there may be page number limitations, a format consisting
+of the principle author’s name and institute, followed by
+“on behalf of the \ldots\ collaboration”, is preferred.
+
+
+\clearpage
+%
+% Include the title/author page of the JACoW Coolaboration
+%
+\includepdf[pages=-, noautoscale, pagecommand={}]{jacow-collaboration.pdf}{}
+
+\clearpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX B:\endgraf IEEE REFERENCE STYLE GUIDE AS APPLIED TO \NoCaseChange{JACoW} PAPERS, \break PERIODICALS AND OTHER WORKS}\vspace*{\baselineskip}]
+
+\subsection{Referencing JACoW Proceedings}
+
+The format for published JACoW proceedings papers is detailed in the following
+and can also be readily deduced from Refs.~[1-3]. At the very minimum, sufficient
+information should be given to enable readers to clearly identify the paper and
+to facilitate its import into digital databases.
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Author Listing} Careful attention should be given to the
+placing of commas and the use of ‘and’ in the author list.
+In particular, for the case of three or more authors
+(as in [3]), a comma also follows the penultimate author.
+The preference for ‘\emph{et al.}’\ takes precedence when the number
+of authors becomes large (e.g., $>$6).
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Paper Title} As is modern practice in references, the title
+of the paper is written in sentence case, i.\,e., only the
+initial letter of the first word in the title is capitalized.
+Proper nouns, however, also have a capital. Capital letters
+appearing in acronyms likewise remain unaltered
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Conference Proceedings} The title of the proceedings is
+written in title case in italics using standard abbreviations,
+such as \emph{Int.} and \emph{Conf.} The preposition, ``in'', in normal
+font, precedes the proceedings title. The location,
+i.\,e., city, state (if USA), and country of the conference
+venue, the month (three-letter abbreviation) and the year
+the conference took place, is then listed. Finally, details
+pertaining to the paper itself, such as the conference paper
+ID, mandatory page numbers, and the digital object
+identifier (DOI), if existing, are listed in the given order.
+A monospaced font for the DOI is used so as to help
+distinguish it from normal text. In \LaTeX{}
+the ‘url’ package is used. The Word template uses the Liberation
+Mono TrueType font (size 8 pt), or Lucida Sans Typewriter
+font (size 7.5 pt) in earlier Word versions where the Liberation
+Mono font may not be available. In LaTeX, the ‘url’
+package is used with its default font now being switched to
+``newtxtt'' which offers a better distinction between
+``\texttt{O}'' and ``\texttt{0}''. The conference
+paper ID is optional and may be included in the absence
+of a DOI to facilitate a search through internet search
+engines. DOIs have been assigned to all JACoW
+publications appearing in recent proceedings and will
+likewise be assigned to articles from conferences further
+past, in due course. The use of DOIs is strongly
+emphasized.
+
+The complete or abbreviated form for citations, as
+shown in the following section, is advocated. The former
+is more informative to readers outside the immediate
+conference sphere, and will further serve to avoid
+potential ambiguities in cases where an acronym is not
+unique. Both forms, however, when adhered to, ensure a
+proper import into digital libraries and information
+sources such as INSPIRE, Scopus, and Google Scholar.
+Authors are also reminded to make a distinction between
+papers published in JACoW proceedings (which have
+page numbers and, in the case of recent publications,
+DOIs) and those papers that may have been presented at
+past JACoW conferences but were not published~[4].
+References to contributions presented at the same
+conference should be written as shown in [5]; the wording
+“this conference” may be optionally appended.
+
+\subsection{Referencing Periodicals and Other Sources}
+
+The IEEE style is also shown for periodicals [6-11],
+online sources [12], books [13, 14], internal reports [15],
+theses [16], manuals or handbooks [17], patents [18] and
+unpublished material [19, 20]. When citing a periodical,
+only the official abbreviation of the journal should be used
+[21]. Examples of correctly formatted references can also be
+found at the JACoW website, under ‘Formatting Citations’ which
+is reached through the ‘for Authors’ link.
+
+\subsection{Alignment of References}
+
+In the \LaTeX{} template, \verb|\bibliography{9}| is used for
+when the total number of references is less than ten. This
+should be changed to \verb|\bibliography{99}| if the number of
+references is ten or more.
+
+\patchcmd\thebibliography{\section*{REFERENCES\@mkboth {REFERENCES}{REFERENCES}}}{}{}{}
+\section{PAPER PUBLISHED IN A CONFERENCE PROCEEDINGS}
+
+\definecolor{jgreen}{cmyk}{0.81, 0.00, 0.97, 0.00}
+\definecolor{jred}{cmyk} {0.00, 0.99, 1.00, 0.00}
+\definecolor{jgrepc}{cmyk}{0.74, 0.05, 1.00, 0.00}
+\definecolor{jblue}{cmyk} {0.87, 0.54, 0.00, 0.00}
+\definecolor{jvio}{cmyk} {0.41, 0.82, 0.00, 0.00}
+\definecolor{jbook}{cmyk} {0.28, 0.88, 0.79, 0.25}
+\definecolor{jrept}{cmyk} {0.07, 0.70, 1.00, 0.00}
+\definecolor{jmanu}{cmyk} {0.28, 0.77, 1.00, 0.23}
+\definecolor{junpu}{cmyk} {0.00, 0.83, 0.65, 0.00}
+
+
+\subsection{Complete Form}
+
+\newcommand{\CCom}[2]{\newline\textcolor{#1}{[#2]}}
+%\begin{thebibliography}{99} % Use for 10-99 references
+\begin{thebibliography}{9} % Use for 1-9 references
+
+ \bibitem{item:1-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators,”
+ in \textit{Proc.\ 9th Int.\ Particle Accelerator Conf.\ (IPAC’18)},
+ Vancouver, BC, Canada, Apr.-May 2018.
+ pp. 567-569. \url{doi:10.18429/JACoW-IPAC2017-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:1-2}
+ A.~Alpha \emph{et al.},
+ “A novel injector,” in \emph{Proc.\ 29th Linear Accelerator Conf.\ (LINAC’18)},
+ Shanghai, China, Sep.\ 2018, pp.\ 27-31. %\newline
+ \url{doi:10.18429/JACoW-LINAC2018-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.};
+ DOI encouraged}
+
+ \bibitem{item:1-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems,”
+ in \emph{Proc.\ 13th Int.\ Conf.\ on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’11)}, Grenoble, France, Oct.\ 2011,
+ paper TUP014, pp.\ 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+ \bibitem{item:2-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators,”
+ in \textit{Proc.\ IPAC’18}, Vancouver, BC, Canada, Apr.-May 2018,
+ pp.\ 567-569. %\newline
+ \url{doi:10.18429/JACoW-IPAC2018-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:2-2}
+ A.~Alpha \emph{et al.},
+ “A novel injector,” in \emph{Proc.\ LINAC’18},
+ Shanghai, China, Sep.\ 2018, pp.\ 27-31. %\newline
+ \url{doi:10.18429/JACoW-LINAC2018-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.}; DOI encouraged}
+
+ \bibitem{item:2-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems,”
+ in \emph{Proc.\ ICALEPCS’11}, Grenoble, France, Oct.\ 2011,
+ paper TUP014, pp.\ 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\section{UNPUBLISHED PAPER PRESENTED AT A PREVIOUS CONFERENCE}
+
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:41}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted,”
+ presented at the 5th Int.\ Particle Accelerator Conf.\ (IPAC’14),
+ Dresden, Germany, Jun.\ 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:42}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted,”
+ presented at IPAC’14,
+ Dresden, Germany, Jun.\ 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+
+\section{PAPER PRESENTED AT THE CURRENT CONFERENCE}
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:51}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk at this conference,”
+ presented at the 10th Int.\ Particle Accelerator
+ Conf.\ (IPAC’19), Melbourne, Australia, May 2019,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:52}
+ “An interesting talk at this conference,”
+ presented at IPAC’19, Melbourne, Australia, May 2019,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+
+\vspace*{-.5\baselineskip}
+\section{PAPER PUBLISHED IN, OR SUBMITTED TO, A PERIODICAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{5}
+ \bibitem{item:6}
+ P.~Mercury \emph{et al.},
+ “Title of paper published in journal,”
+ \emph{Phy.\ Rev.\ Lett.}, vol.\ 114, no.\ 5,
+ p.\ 050511, Feb.\ 2014.
+ \url{doi:10.1103/PhysRevLett.114.050511}
+ \CCom{jblue}{Periodical, Phys.\ Rev.\ Lett.;
+ issue no.\ and month may be omitted}
+
+ \bibitem{item:7}
+ P.~Venus \emph{et al.},
+ “New techniques in laser wakefield accelerators,”
+ \emph{Phys.\ Rev.\ ST Accel.\ Beams}, vol.\ 18,
+ p.\ 120198, Dec.~2015. %\newline
+ \url{doi:10.1103/PhysRevAccelBeams.18.120198}
+ \CCom{jblue}{Periodical, Phys.\ Rev.\ ST Accel.\ Beams;
+ month may be omitted}
+
+ \bibitem{item:8}
+ T.~Earth \emph{et al.},
+ “Low dose irradiation impact on modern silicon detectors,”
+ \emph{Nucl.\ Instr.\ Meth.}, vol.\ 692, pp.\ 256--280, 2014.
+ \url{doi:10.1016/j.nima.2014.11.022}
+ \CCom{jblue}{Periodical, Nucl. Instr. Method.}
+
+ \bibitem{item:9}
+ T.~Earth, L.~Moon, and A.~Belt,
+ “Temporal correlations of x-ray free electron lasers,”
+ \emph{Optics Express}, vol.\ 20, pp.\ 11396--11404, 2012.
+ \url{doi:10.1364/OE.20.11396}
+ \CCom{jblue}{Periodical, Optics Express}
+
+ \bibitem{item:10}
+ J.~B.~Good,
+ “A paper accepted for publication,”
+ \emph{Phys.\ Rev.\ Lett.}, to be published.
+ \CCom{jblue}{Periodical, paper accepted for publication
+ by Phys. Rev. Lett.}
+
+ \bibitem{item:11}
+ G.~D.~Read,
+ “Title of paper submitted for publication,”
+ submitted for publication.
+ \CCom{jblue}{Paper submitted for publication; the name of the
+ periodical does not appear}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\section{ONLINE SOURCE}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{11}
+ \bibitem{item:121}
+ JACoW, \url{http://www.jacow.org}
+ \CCom{jvio}{online source; no hyperlink, no period at end of URL unless there is a trailing “/” as shown below. A monospaced font should be used, this is achieved using the ‘url’ package in \LaTeX}
+
+ \setcounter{enumi}{11}
+ \bibitem{item:122}
+ JACoW, \url{http://www.jacow.org/}.
+ \CCom{jvio}{online source; no hyperlink, period after trailing “/” in URL
+ if optionally preferred. A monospaced font should be used, this is
+ achieved using the ‘url’ package in \LaTeX}
+
+\end{thebibliography}
+
+\section{CITATIONS TO BOOKS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{12}
+ \bibitem{item:13}
+ T.~Earth and L.~Moon,
+ “Title of chapter in the book,”
+ in \emph{Title of Book}, R Mars, Ed.\ New York, NY, USA:
+ Wiley, 1994, pp.\ 42--48.
+ \CCom{jbook}{Chapter in book}
+
+ \bibitem{item:14}
+ A.~Belt, \emph{Title of Book}. Cambridge, MA, USA:
+ MIT Press, 1986.
+ \CCom{jbook}{Book}
+\end{thebibliography}
+
+\section{REPORTS AND THESES}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{14}
+ \bibitem{item:15}
+ G. Jupiter \emph{et al.},
+ “Title of report,” CERN, Geneva, Switzerland,
+ Rep.\ CERN-2012-333, Oct.\ 2012.
+ \CCom{jrept}{Report}
+
+ \bibitem{item:16}
+ A.~Student, “Title of thesis,”
+ Ph.D.\ thesis, Phys.\ Dept.,
+ Karlsruher Institut für Technologie, Karlsruhe,
+ Germany, 2014.
+ \CCom{jrept}{Thesis}
+\end{thebibliography}
+
+\section{MANUAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{16}
+ \bibitem{item:17}
+ \emph{IEEE Editorial Style Manual},
+ IEEE Periodicals,
+ Piscataway, NJ, USA, Oct.\ 2014, pp.\ 34-52;
+ \url{http://www.ieee.org/documents/style_manual.pdf}
+ \CCom{jmanu}{Handbook/Manual, no hyperlink, no period after URL}
+\end{thebibliography}
+
+\section{PATENTS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{17}
+ \bibitem{item:18}
+ A.~N.~Inventor,
+ “Title of patent,”
+ Patent Authority and No., Jan.\ 20, 2016.
+
+\end{thebibliography}
+
+\section{UNPUBLISHED WORK AND PRIVATE COMMUNICATION}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{18}
+ \bibitem{item:19}
+ P.~Neptune, “Title of paper,” unpublished.
+ \CCom{junpu}{Unpublished}
+
+ \bibitem{item:20}
+ P.~Uranus, private communication, Jun.\ 2015.
+ \CCom{junpu}{Private communication}
+\end{thebibliography}
+
+\newpage
+
+\section{JOURNAL ABBREVIATIONS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{20}
+ \bibitem{item:21}
+ \url{https://woodward.library.ubc.ca/researchhelp/journal-abbreviations/}
+
+\end{thebibliography}
+
+\newpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX C:\endgraf THE DILIGENT AUTHOR’S CHECKLIST}\vspace*{\baselineskip}]
+\flushcolsend
+
+\subsection{Common Oversights}
+
+In order to lessen the load on a small team of editors
+and to help expedite publication of the Proceedings, authors
+are kindly asked to give themselves an extra few
+minutes to go over the following points, which highlight
+the most common errors, before uploading their paper. By
+providing a properly formatted JACoW paper, the Proceedings
+Office is able to benefit from an autodistill process
+which automatically converts the author's PDF file
+into a version that adheres to the JACoW-compliant PDF
+standard. The process further ensures that all fonts required
+to view the entire document are embedded, rendering
+a final PDF that qualifies technically for publication.
+
+
+\subsection{Author and Affiliation Listing}
+
+The names of authors and their affiliations should be in
+\SI{12}{pt} uppercase and lowercase letters, with standard,
+roman fonts (i.\,e., not italics). When there is more than
+one author, the submitting author should be first, followed
+by the coauthor. Coauthors should be grouped by affiliation
+and then be listed alphabetically. Please refer to \textbf{ANNEX~A}
+for further details and examples, particularly for
+the case where authors have multiple institutes.
+
+\subsection{SPMS Database and Final Manuscript Validation}
+
+Primary authors are reminded that it is their
+responsibility to verify the accuracy of the title, abstract,
+and coauthor/institute listing, and that these are identical
+in both the final manuscript and SPMS database. This is
+required to ensure the proper indexing of author/coauthor(s)
+appear in the published proceedings.
+
+\subsection{Subsection Headings}
+
+Subsection Headings are in \SI{12}{pt} \emph{italic} lowercase and uppercase.
+The initial letter of every principle word is capitalized,
+and the heading is left aligned in the column.
+
+\subsection{Figure Captions}
+
+Figure captions should be placed \emph{below} the figure and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Figure 1: A one line figure caption is centred.
+\end{center}
+\begin{justify}
+ Figure 2: A lengthy figure caption that spans
+ two lines is justified.
+\end{justify}
+Note the colon “:” after the figure number and the period
+“.” at the end of the caption.
+
+When referring to a figure from within the text, the
+convention is to use the abbreviated form, i.\,e., Fig.~1,
+\emph{unless} the reference to the figure is at the start of the sentence:
+\begin{quote}
+ Figure 1 shows a schematic view of\ldots
+
+ \ldots as shown in Fig.~1.
+\end{quote}
+
+% if set as \subsection, the title will appear at the top
+% of the column followed by "Table captions ... lines:",
+% then follows the text above after the justify till end of quote
+\iffalse
+\subsection{Table Headings}
+\else
+\noindent\textit{\vspace{1em}\large Table Headings}
+\fi
+
+Table captions should be placed \emph{above} the table and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Table 1: Table Heading
+\end{center}
+\begin{justify}
+ Table 2: A Particularly Long Table Heading
+ Spanning Two Lines
+\end{justify}
+
+Note the colon “:” after the table number, that the initial
+letters of the principle words in the table heading are
+capitalized, and the absence of a period at the end of the
+caption.
+
+When referring to a table from within the text, the convention
+is \emph{not} to abbreviate, i.\,e., Table 1.
+
+\subsection{Equations}
+
+If a displayed equation requires a number, it should be
+placed flush with the right margin of the column.
+
+\subsection{Units}
+
+An unbreakable space should always precede a unit. In \LaTeX{} use
+a “\verb|\,|” or the ‘siunitx’ package to format units.
+Examples are:
+\SI{3}{keV}, \SI{4}{GeV}, \SI{100}{kW}, \SI{7}{\micro m}.
+
+\subsection{References}
+
+References are written in \SI{9}{pt} size and should be neatly
+presented in a consistent format with reference numbers
+aligned. Please refer to \textbf{ANNEX~B} for the preferred format
+and proper alignment.
+
+Please also ensure that references in the text are cited in
+sequential order.
+
+\flushend