summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/base/source2e.tex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex/base/source2e.tex')
-rw-r--r--Master/texmf-dist/doc/latex/base/source2e.tex483
1 files changed, 0 insertions, 483 deletions
diff --git a/Master/texmf-dist/doc/latex/base/source2e.tex b/Master/texmf-dist/doc/latex/base/source2e.tex
deleted file mode 100644
index 2cbca0a93cb..00000000000
--- a/Master/texmf-dist/doc/latex/base/source2e.tex
+++ /dev/null
@@ -1,483 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004
-% The LaTeX3 Project and any individual authors listed elsewhere
-% in this file.
-%
-% This file is part of the LaTeX base system.
-% -------------------------------------------
-%
-% It may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-% http://www.latex-project.org/lppl.txt
-% and version 1.3 or later is part of all distributions of LaTeX
-% version 2003/12/01 or later.
-%
-% This file has the LPPL maintenance status "maintained".
-%
-% The list of all files belonging to the LaTeX base distribution is
-% given in the file `manifest.txt'. See also `legal.txt' for additional
-% information.
-%
-% The list of derived (unpacked) files belonging to the distribution
-% and covered by LPPL is defined by the unpacking scripts (with
-% extension .ins) which are part of the distribution.
-%
-% \fi
-
-% This document will typeset the LaTeX sources as a single document.
-% This will produce quite a large file (roughly 555 pages) and may
-% take a long time.
-%
-% Some notes on processing this document are contained at the end
-% of this document, after \end{document}
-%
-% DPC 1997/11/17
-%
-% First a special index style for makeindex
-%
-
-\begin{filecontents}{source2e.ist}
-actual '='
-quote '!'
-level '>'
-preamble
-"\n \\begin{theindex} \n \\makeatletter\\scan@allowedfalse\n"
-postamble
-"\n\n \\end{theindex}\n"
-item_x1 "\\efill \n \\subitem "
-item_x2 "\\efill \n \\subsubitem "
-delim_0 "\\pfill "
-delim_1 "\\pfill "
-delim_2 "\\pfill "
-% The next lines will produce some warnings when
-% running Makeindex as they try to cover two different
-% versions of the program:
-lethead_prefix "{\\bfseries\\hfil "
-lethead_suffix "\\hfil}\\nopagebreak\n"
-lethead_flag 1
-heading_prefix "{\\bfseries\\hfil "
-heading_suffix "\\hfil}\\nopagebreak\n"
-headings_flag 1
-
-% and just for source2e:
-% Remove R so I is treated in sequence I J K not I II III
-page_precedence "rnaA"
-\end{filecontents}
-
-
-
-\documentclass{ltxdoc}
-
-\listfiles
-
-% Do not index some TeX primitives, and some common plain TeX commands.
-
-\DoNotIndex{\def,\long,\edef,\xdef,\gdef,\let,\global}
-\DoNotIndex{\if,\ifnum,\ifdim,\ifcat,\ifmmode,\ifvmode,\ifhmode,%
- \iftrue,\iffalse,\ifvoid,\ifx,\ifeof,\ifcase,\else,\or,\fi}
-\DoNotIndex{\box,\copy,\setbox,\unvbox,\unhbox,\hbox,%
- \vbox,\vtop,\vcenter}
-\DoNotIndex{\@empty,\immediate,\write}
-\DoNotIndex{\egroup,\bgroup,\expandafter,\begingroup,\endgroup}
-\DoNotIndex{\divide,\advance,\multiply,\count,\dimen}
-\DoNotIndex{\relax,\space,\string}
-\DoNotIndex{\csname,\endcsname,\@spaces,\openin,\openout,%
- \closein,\closeout}
-\DoNotIndex{\catcode,\endinput}
-\DoNotIndex{\jobname,\message,\read,\the,\m@ne,\noexpand}
-\DoNotIndex{\hsize,\vsize,\hskip,\vskip,\kern,\hfil,\hfill,\hss}
-\DoNotIndex{\m@ne,\z@,\z@skip,\@ne,\tw@,\p@}
-\DoNotIndex{\dp,\wd,\ht,\vss,\unskip}
-
-% Set up the Index and Change History to use \part
-\IndexPrologue{\part*{Index}%
- \markboth{Index}{Index}%
- \addcontentsline{toc}{part}{Index}%
- The italic numbers denote the pages where the
- corresponding entry is described,
- numbers underlined point to the definition,
- all others indicate the places where it is used.}
-
-\GlossaryPrologue{\part*{Change History}%
-% Allow control names to be hyphenated here...
- {\GlossaryParms\ttfamily\hyphenchar\font=`\-}%
- \markboth{Change History}{Change History}%
- \addcontentsline{toc}{part}{Change History}}
-
-% The standard \changes command modified slightly to better cope with
-% this multiple file document.
-\makeatletter
-\def\changes@#1#2#3{%
- \let\protect\@unexpandable@protect
- \edef\@tempa{\noexpand\glossary{#2\space\currentfile\space#1\levelchar
- \ifx\saved@macroname\@empty
- \space
- \actualchar
- \generalname
- \else
- \expandafter\@gobble
- \saved@macroname
- \actualchar
- \string\verb\quotechar*%
- \verbatimchar\saved@macroname
- \verbatimchar
- \fi
- :\levelchar #3}}%
- \@tempa\endgroup\@esphack}
-\makeatother
-
-% Produce a Change Log and (2 column) Index.
-\RecordChanges
-\CodelineIndex
-\EnableCrossrefs
-\setcounter{IndexColumns}{2}
-
-% Needed for documentation in ltoutenc.dtx
-\usepackage{textcomp}
-
-\begin{document}
- \title{The \LaTeXe\ Sources}
- \author{%
- Johannes Braams\\
- David Carlisle\\
- Alan Jeffrey\\
- Leslie Lamport\\
- Frank Mittelbach\\
- Chris Rowley\\
- Rainer Sch\"opf}
-
-% This command will be used to input the patch file
-% if that file exists.
-\newcommand{\includeltpatch}{%
- \def\currentfile{ltpatch.ltx}
- \part{ltpatch}
- {\let\ttfamily\relax
- \xdef\filekey{\filekey, \thepart={\ttfamily\currentfile}}}%
- Things we did wrong\ldots
- \IndexInput{ltpatch.ltx}}
-
-
-
-% Get the date from ltvers.dtx
-\makeatletter
-\let\patchdate=\@empty
-\begingroup
- \def\ProvidesFile#1\fmtversion#2{\date{#2}\endinput}
- \input{ltvers.dtx}
-\global\let\X@date=\@date
-
-% Add the patch version if available.
- \long\def\Xdef#1#2#3\def#4#5{%
- \xdef\X@date{#2}%
- \xdef\patchdate{#5}%
- \endinput}%
- \InputIfFileExists{ltpatch.ltx}
- {\let\def\Xdef}{\global\let\includeltpatch\relax}
-\endgroup
-
-\ifx\@date\X@date
- \def\Xpatch{0}
- \ifx\patchdate\Xpatch\else
- \edef\@date{\@date\space Patch level \patchdate}
- \fi
-\else
- \@warning{ltpatch.ltx does not match ltvers.dtx!}
- \let\includeltpatch\relax
-\fi
-\makeatother
-
- \pagenumbering{roman}
- \maketitle
- \renewcommand\maketitle{}
-
- \tableofcontents
-
- \clearpage
-
- \pagenumbering{arabic}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Each of the following \DocInclude lines includes a file with extension
-% .dtx. Each of these files may be typeset separately. For instance
-% latex ltboxes.dtx
-% will typeset the source of the LaTeX box commands.
-%
-% If this file is processed, each of these separate dtx files will be
-% contained as a part of a single document. Using ltxdoc.cfg you can
-% then optionally produce a combined index and/or change history for
-% the entire source of the format file. Note that such a document will
-% be quite large (about 555 pages).
-%
-
- \DocInclude{ltdirchk} % System dependant initialisation
-
- \DocInclude{ltplain} % LaTeX version of Knuth's plain.tex
-
- \DocInclude{ltvers} % Current version date
-
- \DocInclude{ltdefns} % Initial definitions.
-
- \DocInclude{ltalloc} % Allocation of counters and others.
-
- \DocInclude{ltcntrl} % Program control macros.
-
- \DocInclude{lterror} % Error handling.
-
- \DocInclude{ltpar} % Paragraphs.
-
- \DocInclude{ltspace} % Spacing, line and page breaking.
-
- \DocInclude{ltlogos} % Logos.
-
- \DocInclude{ltfiles} % \input files and related commands
-
- \DocInclude{ltoutenc} % Output encoding interface
-
- \DocInclude{ltcounts} % Counters
-
- \DocInclude{ltlength} % Lengths
-
- \DocInclude{ltfssbas} % NFSS Base macros
-
- \DocInclude{ltfsstrc} % NFSS Tracing (and tracefnt.sty)
-
- \DocInclude{ltfsscmp} % NFSS1 Compatibility
-
- \DocInclude{ltfssdcl} % NFSS Declarative interface
-
- \DocInclude{ltfssini} % NFSS Initialisation
-
- \DocInclude{fontdef} % fonttext.ltx/fontmath.ltx
-
- \DocInclude{preload} % preload.ltx
-
- \DocInclude{ltfntcmd} % \textrm etc
-
- \DocInclude{ltpageno} % Page numbering
-
- \DocInclude{ltxref} % Cross referencing
-
- \DocInclude{ltmiscen} % Miscellaneous environment definitions.
-
- \DocInclude{ltmath} % Mathematics set up.
-
- \DocInclude{ltlists} % List and related environments
-
- \DocInclude{ltboxes} % Parbox and friends
-
- \DocInclude{lttab} % Tabbing tabular and array
-
- \DocInclude{ltpictur} % Picture mode
-
- \DocInclude{ltthm} % Theorem environments
-
- \DocInclude{ltsect} % Sectioning
-
- \DocInclude{ltfloat} % Floats
-
- \DocInclude{ltidxglo} % Index and Glossary
-
- \DocInclude{ltbibl} % Bibliography
-
- \DocInclude{ltpage} % \pagestyle \raggedbottom \sloppy
-
- \DocInclude{ltoutput} % Output routine
-
- \DocInclude{ltclass} % Package & Class interface
-
- \DocInclude{lthyphen} % Hyphenation (hyphen.ltx).
-
- \DocInclude{ltfinal} % Last minute initialisations and dump
-
- \includeltpatch % Corrections distributed after the full release
-
-% Stop here if ltxdoc.cfg says \AtEndOfClass{\OnlyDescription}
-\StopEventually{\end{document}}
-
-\clearpage
-\pagestyle{headings}
-
-% Make TeX shut up.
-\hbadness=10000
-\newcount\hbadness
-\hfuzz=\maxdimen
-
-\typeout{%
- \string # Produce change log with^^J%
- makeindex -s gglo.ist -o source2e.gls source2e.glo}
-
-
-\PrintChanges
-
-\clearpage
-
-% makeindex needs a symbol between the parts of composite page numbers
-% but we dont want one, so:
-\typeout{%
- \string # Produce index with^^J%
- makeindex -s source2e.ist source2e.idx}
-
-\begingroup
-\def\endash{--}
-\catcode`\-\active
-\def-{\futurelet\temp\indexdash}
-\def\indexdash{\ifx\temp-\endash\fi}
-
-\PrintIndex
-\endgroup
-
-% Make sure that the index is not printed twice
-% (ltxdoc.cfg might have a second \PrintIndex command)
-\let\PrintChanges\relax
-\let\PrintIndex\relax
-
-\end{document}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-To use this file to produce a fully indexed source code
-you need to execute the following (or equivalent) commands:
-
- latex source2e.tex
-
- makeindex -s source2e.ist source2e.idx
- makeindex -s gglo.ist -o source2e.gls source2e.glo
-
- latex source2e.tex
- latex source2e.tex
-
-
-The makeindex style source2e.ist is used in place of the usual
-doc gind.ist to ensure that I is used in the sequence I J K
-not I II II, which would be the default makeindex behaviour.
-
-The third run with latex is only required to get the table of
-contents entries for the change log and index. You may speed things up
-by using the \includeonly mechanism so as not to typeset the source
-files on the second run. This involves changing the file
-ltxdoc.cfg
-between the latex runs.
-
-The following unix script automates this.
- (It could easily be ported to scripts for DOS or VMS,
- rm is ReMove a file, and echo "..." > file writes ... to "file".)
-
-
-After this script (after the second ==============) is a similar script
-that will produce the documentation for all the files in the base
-distribution that are *not* included in source2e.dvi. This second script
-was requested, but before using it, beware it will take a long time!
-It may however be modified as required, eg to not typeset the fdd files
-or whatever...
-
-==============
-#!/bin/sh
-
-rm -f source2e.gls source2e.ind source2e.toc
-
-# First run:
-# Create new standard ltxdoc.cfg file
-# Pass the (possibly empty) list of arguments supplied on the
-# command line to article class.
-#
-# If you use A4 paper, running this script with argument
-# a4paper
-# may save about 30 pages.
-#
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-
-
-# Now LaTeX the file with this cfg file.
-#
-latex source2e.tex
-
-
-# Make the Change log and Glossary.
-#
-makeindex -s source2e.ist source2e.idx
-makeindex -s gglo.ist -o source2e.gls source2e.glo
-
-
-# Second run: append \includeonly{} to ltxdoc.cfg to speed up things
-# (this run needed only to get changes and index listed in .toc file)
-#
-# Note that the index will not be made incorrect by the insertion
-# of the table of contents as the front matter uses a diferent page
-# numbering scheme.
-#
-echo "\includeonly{}" >> ltxdoc.cfg
-
-latex source2e.tex
-
-
-# Third and final run, to put everything together.
-# First restore the cfg file:
-#
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-latex source2e.tex
-
-
-==============
-#!/bin/sh
-
-# Running this script will process all the dtx fdd and *guide.tex
-# and ltnews*.tex files in the LaTeX distribution, except the dtx
-# files included in source2e.tex.
-# (The shell first script in the comments of source2e.tex will
-# process those.)
-
-# Any command line arguments (eg a4paper) are taken as options to the
-# article class.
-
-# This script is likely to take ages!
-
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-echo "\batchmode" >> ltxdoc.cfg
-
-# The next four lines produce full indexes and change logs
-# you may not want those.
-echo "\AtBeginDocument{\RecordChanges}" >> ltxdoc.cfg
-echo "\AtEndDocument{\PrintChanges}" >> ltxdoc.cfg
-echo "\AtBeginDocument{\CodelineIndex\EnableCrossrefs}" >> ltxdoc.cfg
-echo "\AtEndDocument{\PrintIndex}" >> ltxdoc.cfg
-
-# If you do not want any code listings, just documentation, then instead
-# of the above four lines, uncomment the following:
-# echo "\AtBeginDocument{\OnlyDescription}" >> ltxdoc.cfg
-
-echo "\PassOptionsToClass{$*}{article}" > ltxguide.cfg
-echo "\batchmode" >> ltxguide.cfg
-
-cp ltxguide.cfg ltnews.cfg
-
-
-for i in *dtx *fdd *guide.tex ltnews*.tex
-do
-B=`basename $i .dtx`
-
-if (grep "Include{$B}" source2e.tex >/dev/null ; )
-then
-echo In source2e: $i
-else
-echo latex $i
- if (latex $i > /dev/null)
- then
- echo latex $i
- latex $i > /dev/null
- echo makeindex -s gind.ist $B.idx
- makeindex -s gind.ist $B.idx > /dev/null 2> /dev/null
- echo makeindex -s gglo.ist -o $B.gls $B.glo
- makeindex -s gglo.ist -o $B.gls $B.glo > /dev/null 2> /dev/null
- echo latex $i
- latex $i > /dev/null
- else
- echo "!!! LaTeX ERROR: $i. (See $B.log.)"
- fi
-fi
-
-done