diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex')
-rw-r--r-- | Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex | 723 |
1 files changed, 0 insertions, 723 deletions
diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex deleted file mode 100644 index 04cc67ddc33..00000000000 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex +++ /dev/null @@ -1,723 +0,0 @@ -%% -%% This is file `sample-sigchi-a.tex', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% samples.dtx (with options: `sigchi-a') -%% -%% IMPORTANT NOTICE: -%% -%% For the copyright see the source file. -%% -%% Any modified versions of this file must be renamed -%% with new filenames distinct from sample-sigchi-a.tex. -%% -%% For distribution of the original source see the terms -%% for copying and modification in the file samples.dtx. -%% -%% This generated file may be distributed as long as the -%% original source files, as listed above, are part of the -%% same distribution. (The sources need not necessarily be -%% in the same archive or directory.) -%% -%% The first command in your LaTeX source must be the \documentclass command. -\documentclass[sigchi-a]{acmart} - -%% -%% \BibTeX command to typeset BibTeX logo in the docs -\AtBeginDocument{% - \providecommand\BibTeX{{% - \normalfont B\kern-0.5em{\scshape i\kern-0.25em b}\kern-0.8em\TeX}}} - -%% Rights management information. This information is sent to you -%% when you complete the rights form. These commands have SAMPLE -%% values in them; it is your responsibility as an author to replace -%% the commands and values with those provided to you when you -%% complete the rights form. -\setcopyright{acmcopyright} -\copyrightyear{2018} -\acmYear{2018} -\acmDOI{10.1145/1122445.1122456} - -%% These commands are for a PROCEEDINGS abstract or paper. -\acmConference[Woodstock '18]{Woodstock '18: ACM Symposium on Neural - Gaze Detection}{June 03--05, 2018}{Woodstock, NY} -\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection, - June 03--05, 2018, Woodstock, NY} -\acmPrice{15.00} -\acmISBN{978-1-4503-XXXX-X/18/06} - - -%% -%% Submission ID. -%% Use this when submitting an article to a sponsored event. You'll -%% receive a unique submission ID from the organizers -%% of the event, and this ID should be used as the parameter to this command. -%%\acmSubmissionID{123-A56-BU3} - -%% -%% The majority of ACM publications use numbered citations and -%% references. The command \citestyle{authoryear} switches to the -%% "author year" style. -%% -%% If you are preparing content for an event -%% sponsored by ACM SIGGRAPH, you must use the "author year" style of -%% citations and references. -%% Uncommenting -%% the next command will enable that style. -%%\citestyle{acmauthoryear} - -%% -%% end of the preamble, start of the body of the document source. -\begin{document} - -%% -%% The "title" command has an optional parameter, -%% allowing the author to define a "short title" to be used in page headers. -\title{The Name of the Title is Hope} - -%% -%% The "author" command and its associated commands are used to define -%% the authors and their affiliations. -%% Of note is the shared affiliation of the first two authors, and the -%% "authornote" and "authornotemark" commands -%% used to denote shared contribution to the research. -\author{Ben Trovato} -\authornote{Both authors contributed equally to this research.} -\email{trovato@corporation.com} -\orcid{1234-5678-9012} -\author{G.K.M. Tobin} -\authornotemark[1] -\email{webmaster@marysville-ohio.com} -\affiliation{% - \institution{Institute for Clarity in Documentation} - \streetaddress{P.O. Box 1212} - \city{Dublin} - \state{Ohio} - \postcode{43017-6221} -} - -\author{Lars Th{\o}rv{\"a}ld} -\affiliation{% - \institution{The Th{\o}rv{\"a}ld Group} - \streetaddress{1 Th{\o}rv{\"a}ld Circle} - \city{Hekla} - \country{Iceland}} -\email{larst@affiliation.org} - -\author{Valerie B\'eranger} -\affiliation{% - \institution{Inria Paris-Rocquencourt} - \city{Rocquencourt} - \country{France} -} - -\author{Aparna Patel} -\affiliation{% - \institution{Rajiv Gandhi University} - \streetaddress{Rono-Hills} - \city{Doimukh} - \state{Arunachal Pradesh} - \country{India}} - -\author{Huifen Chan} -\affiliation{% - \institution{Tsinghua University} - \streetaddress{30 Shuangqing Rd} - \city{Haidian Qu} - \state{Beijing Shi} - \country{China}} - -\author{Charles Palmer} -\affiliation{% - \institution{Palmer Research Laboratories} - \streetaddress{8600 Datapoint Drive} - \city{San Antonio} - \state{Texas} - \postcode{78229}} -\email{cpalmer@prl.com} - -\author{John Smith} -\affiliation{\institution{The Th{\o}rv{\"a}ld Group}} -\email{jsmith@affiliation.org} - -\author{Julius P. Kumquat} -\affiliation{\institution{The Kumquat Consortium}} -\email{jpkumquat@consortium.net} - -%% -%% By default, the full list of authors will be used in the page -%% headers. Often, this list is too long, and will overlap -%% other information printed in the page headers. This command allows -%% the author to define a more concise list -%% of authors' names for this purpose. -\renewcommand{\shortauthors}{Trovato and Tobin, et al.} - -%% -%% The abstract is a short summary of the work to be presented in the -%% article. -\begin{abstract} - A clear and well-documented \LaTeX\ document is presented as an - article formatted for publication by ACM in a conference proceedings - or journal publication. Based on the ``acmart'' document class, this - article presents and explains many of the common variations, as well - as many of the formatting elements an author may use in the - preparation of the documentation of their work. -\end{abstract} - -%% -%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm. -%% Please copy and paste the code instead of the example below. -%% -\begin{CCSXML} -<ccs2012> - <concept> - <concept_id>10010520.10010553.10010562</concept_id> - <concept_desc>Computer systems organization~Embedded systems</concept_desc> - <concept_significance>500</concept_significance> - </concept> - <concept> - <concept_id>10010520.10010575.10010755</concept_id> - <concept_desc>Computer systems organization~Redundancy</concept_desc> - <concept_significance>300</concept_significance> - </concept> - <concept> - <concept_id>10010520.10010553.10010554</concept_id> - <concept_desc>Computer systems organization~Robotics</concept_desc> - <concept_significance>100</concept_significance> - </concept> - <concept> - <concept_id>10003033.10003083.10003095</concept_id> - <concept_desc>Networks~Network reliability</concept_desc> - <concept_significance>100</concept_significance> - </concept> -</ccs2012> -\end{CCSXML} - -\ccsdesc[500]{Computer systems organization~Embedded systems} -\ccsdesc[300]{Computer systems organization~Redundancy} -\ccsdesc{Computer systems organization~Robotics} -\ccsdesc[100]{Networks~Network reliability} - -%% -%% Keywords. The author(s) should pick words that accurately describe -%% the work being presented. Separate the keywords with commas. -\keywords{datasets, neural networks, gaze detection, text tagging} - - -%% -%% This command processes the author and affiliation and title -%% information and builds the first part of the formatted document. -\maketitle - -\section{Introduction} -ACM's consolidated article template, introduced in 2017, provides a -consistent \LaTeX\ style for use across ACM publications, and -incorporates accessibility and metadata-extraction functionality -necessary for future Digital Library endeavors. Numerous ACM and -SIG-specific \LaTeX\ templates have been examined, and their unique -features incorporated into this single new template. - -If you are new to publishing with ACM, this document is a valuable -guide to the process of preparing your work for publication. If you -have published with ACM before, this document provides insight and -instruction into more recent changes to the article template. - -The ``\verb|acmart|'' document class can be used to prepare articles -for any ACM publication --- conference or journal, and for any stage -of publication, from review to final ``camera-ready'' copy, to the -author's own version, with {\itshape very} few changes to the source. - -\section{Template Overview} -As noted in the introduction, the ``\verb|acmart|'' document class can -be used to prepare many different kinds of documentation --- a -double-blind initial submission of a full-length technical paper, a -two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready'' -journal article, a SIGCHI Extended Abstract, and more --- all by -selecting the appropriate {\itshape template style} and {\itshape - template parameters}. - -This document will explain the major features of the document -class. For further information, the {\itshape \LaTeX\ User's Guide} is -available from -\url{https://www.acm.org/publications/proceedings-template}. - -\subsection{Template Styles} - -The primary parameter given to the ``\verb|acmart|'' document class is -the {\itshape template style} which corresponds to the kind of publication -or SIG publishing the work. This parameter is enclosed in square -brackets and is a part of the {\verb|documentclass|} command: -\begin{verbatim} - \documentclass[STYLE]{acmart} -\end{verbatim} - -Journals use one of three template styles. All but three ACM journals -use the {\verb|acmsmall|} template style: -\begin{itemize} -\item {\verb|acmsmall|}: The default journal template style. -\item {\verb|acmlarge|}: Used by JOCCH and TAP. -\item {\verb|acmtog|}: Used by TOG. -\end{itemize} - -The majority of conference proceedings documentation will use the {\verb|acmconf|} template style. -\begin{itemize} -\item {\verb|acmconf|}: The default proceedings template style. -\item{\verb|sigchi|}: Used for SIGCHI conference articles. -\item{\verb|sigchi-a|}: Used for SIGCHI ``Extended Abstract'' articles. -\item{\verb|sigplan|}: Used for SIGPLAN conference articles. -\end{itemize} - -\subsection{Template Parameters} - -In addition to specifying the {\itshape template style} to be used in -formatting your work, there are a number of {\itshape template parameters} -which modify some part of the applied template style. A complete list -of these parameters can be found in the {\itshape \LaTeX\ User's Guide.} - -Frequently-used parameters, or combinations of parameters, include: -\begin{itemize} -\item {\verb|anonymous,review|}: Suitable for a ``double-blind'' - conference submission. Anonymizes the work and includes line - numbers. Use with the \verb|\acmSubmissionID| command to print the - submission's unique ID on each page of the work. -\item{\verb|authorversion|}: Produces a version of the work suitable - for posting by the author. -\item{\verb|screen|}: Produces colored hyperlinks. -\end{itemize} - -This document uses the following string as the first command in the -source file: -\begin{verbatim} -\documentclass[sigchi-a]{acmart} -\end{verbatim} - -\section{Modifications} - -Modifying the template --- including but not limited to: adjusting -margins, typeface sizes, line spacing, paragraph and list definitions, -and the use of the \verb|\vspace| command to manually adjust the -vertical spacing between elements of your work --- is not allowed. - -{\bfseries Your document will be returned to you for revision if - modifications are discovered.} - -\section{Typefaces} - -The ``\verb|acmart|'' document class requires the use of the -``Libertine'' typeface family. Your \TeX\ installation should include -this set of packages. Please do not substitute other typefaces. The -``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used, -as they will override the built-in typeface families. - -\section{Title Information} - -The title of your work should use capital letters appropriately - -\url{https://capitalizemytitle.com/} has useful rules for -capitalization. Use the {\verb|title|} command to define the title of -your work. If your work has a subtitle, define it with the -{\verb|subtitle|} command. Do not insert line breaks in your title. - -If your title is lengthy, you must define a short version to be used -in the page headers, to prevent overlapping text. The \verb|title| -command has a ``short title'' parameter: -\begin{verbatim} - \title[short title]{full title} -\end{verbatim} - -\section{Authors and Affiliations} - -Each author must be defined separately for accurate metadata -identification. Multiple authors may share one affiliation. Authors' -names should not be abbreviated; use full first names wherever -possible. Include authors' e-mail addresses whenever possible. - -Grouping authors' names or e-mail addresses, or providing an ``e-mail -alias,'' as shown below, is not acceptable: -\begin{verbatim} - \author{Brooke Aster, David Mehldau} - \email{dave,judy,steve@university.edu} - \email{firstname.lastname@phillips.org} -\end{verbatim} - -The \verb|authornote| and \verb|authornotemark| commands allow a note -to apply to multiple authors --- for example, if the first two authors -of an article contributed equally to the work. - -If your author list is lengthy, you must define a shortened version of -the list of authors to be used in the page headers, to prevent -overlapping text. The following command should be placed just after -the last \verb|\author{}| definition: -\begin{verbatim} - \renewcommand{\shortauthors}{McCartney, et al.} -\end{verbatim} -Omitting this command will force the use of a concatenated list of all -of the authors' names, which may result in overlapping text in the -page headers. - -The article template's documentation, available at -\url{https://www.acm.org/publications/proceedings-template}, has a -complete explanation of these commands and tips for their effective -use. - -Note that authors' addresses are mandatory for journal articles. - -\section{Rights Information} - -Authors of any work published by ACM will need to complete a rights -form. Depending on the kind of work, and the rights management choice -made by the author, this may be copyright transfer, permission, -license, or an OA (open access) agreement. - -Regardless of the rights management choice, the author will receive a -copy of the completed rights form once it has been submitted. This -form contains \LaTeX\ commands that must be copied into the source -document. When the document source is compiled, these commands and -their parameters add formatted text to several areas of the final -document: -\begin{itemize} -\item the ``ACM Reference Format'' text on the first page. -\item the ``rights management'' text on the first page. -\item the conference information in the page header(s). -\end{itemize} - -Rights information is unique to the work; if you are preparing several -works for an event, make sure to use the correct set of commands with -each of the works. - -The ACM Reference Format text is required for all articles over one -page in length, and is optional for one-page articles (abstracts). - -\section{CCS Concepts and User-Defined Keywords} - -Two elements of the ``acmart'' document class provide powerful -taxonomic tools for you to help readers find your work in an online -search. - -The ACM Computing Classification System --- -\url{https://www.acm.org/publications/class-2012} --- is a set of -classifiers and concepts that describe the computing -discipline. Authors can select entries from this classification -system, via \url{https://dl.acm.org/ccs/ccs.cfm}, and generate the -commands to be included in the \LaTeX\ source. - -User-defined keywords are a comma-separated list of words and phrases -of the authors' choosing, providing a more flexible way of describing -the research being presented. - -CCS concepts and user-defined keywords are required for for all -articles over two pages in length, and are optional for one- and -two-page articles (or abstracts). - -\section{Sectioning Commands} - -Your work should use standard \LaTeX\ sectioning commands: -\verb|section|, \verb|subsection|, \verb|subsubsection|, and -\verb|paragraph|. They should be numbered; do not remove the numbering -from the commands. - -Simulating a sectioning command by setting the first word or words of -a paragraph in boldface or italicized text is {\bfseries not allowed.} - -\section{Tables} - -The ``\verb|acmart|'' document class includes the ``\verb|booktabs|'' -package --- \url{https://ctan.org/pkg/booktabs} --- for preparing -high-quality tables. - -Table captions are placed {\itshape above} the table. - -Because tables cannot be split across pages, the best placement for -them is typically the top of the page nearest their initial cite. To -ensure this proper ``floating'' placement of tables, use the -environment \textbf{table} to enclose the table's contents and the -table caption. The contents of the table itself must go in the -\textbf{tabular} environment, to be aligned properly in rows and -columns, with the desired horizontal and vertical rules. Again, -detailed instructions on \textbf{tabular} material are found in the -\textit{\LaTeX\ User's Guide}. - -Immediately following this sentence is the point at which -Table~\ref{tab:freq} is included in the input file; compare the -placement of the table here with the table in the printed output of -this document. - -\begin{margintable} - \caption{Frequency of Special Characters} - \label{tab:freq} - \begin{tabular}{ccl} - \toprule - Non-English or Math&Frequency&Comments\\ - \midrule - \O & 1 in 1,000& For Swedish names\\ - $\pi$ & 1 in 5& Common in math\\ - \$ & 4 in 5 & Used in business\\ - $\Psi^2_1$ & 1 in 40,000& Unexplained usage\\ - \bottomrule -\end{tabular} -\end{margintable} - -To set a wider table, which takes up the whole width of the page's -live area, use the environment \textbf{table*} to enclose the table's -contents and the table caption. As with a single-column table, this -wide table will ``float'' to a location deemed more -desirable. Immediately following this sentence is the point at which -Table~\ref{tab:commands} is included in the input file; again, it is -instructive to compare the placement of the table here with the table -in the printed output of this document. - -\begin{table*} - \caption{Some Typical Commands} - \label{tab:commands} - \begin{tabular}{ccl} - \toprule - Command &A Number & Comments\\ - \midrule - \texttt{{\char'134}author} & 100& Author \\ - \texttt{{\char'134}table}& 300 & For tables\\ - \texttt{{\char'134}table*}& 400& For wider tables\\ - \bottomrule - \end{tabular} -\end{table*} - -\section{Math Equations} -You may want to display math equations in three distinct styles: -inline, numbered or non-numbered display. Each of the three are -discussed in the next sections. - -\subsection{Inline (In-text) Equations} -A formula that appears in the running text is called an inline or -in-text formula. It is produced by the \textbf{math} environment, -which can be invoked with the usual -\texttt{{\char'134}begin\,\ldots{\char'134}end} construction or with -the short form \texttt{\$\,\ldots\$}. You can use any of the symbols -and structures, from $\alpha$ to $\omega$, available in -\LaTeX~\cite{Lamport:LaTeX}; this section will simply show a few -examples of in-text equations in context. Notice how this equation: -\begin{math} - \lim_{n\rightarrow \infty}x=0 -\end{math}, -set here in in-line math style, looks slightly different when -set in display style. (See next section). - -\subsection{Display Equations} -A numbered display equation---one set off by vertical space from the -text and centered horizontally---is produced by the \textbf{equation} -environment. An unnumbered display equation is produced by the -\textbf{displaymath} environment. - -Again, in either environment, you can use any of the symbols and -structures available in \LaTeX\@; this section will just give a couple -of examples of display equations in context. First, consider the -equation, shown as an inline equation above: -\begin{equation} - \lim_{n\rightarrow \infty}x=0 -\end{equation} -Notice how it is formatted somewhat differently in -the \textbf{displaymath} -environment. Now, we'll enter an unnumbered equation: -\begin{displaymath} - \sum_{i=0}^{\infty} x + 1 -\end{displaymath} -and follow it with another numbered equation: -\begin{equation} - \sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f -\end{equation} -just to demonstrate \LaTeX's able handling of numbering. - -\section{Figures} - -The ``\verb|figure|'' environment should be used for figures. One or -more images can be placed within a figure. If your figure contains -third-party material, you must clearly identify it as such, as shown -in the example below. -\begin{marginfigure} - \centering - \includegraphics[width=\linewidth]{sample-franklin} - \caption{1907 Franklin Model D roadster. Photograph by Harris \& - Ewing, Inc. [Public domain], via Wikimedia - Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} -\end{marginfigure} - -Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. - -Figure captions are placed {\itshape below} the figure. - -\subsection{The ``Teaser Figure''} - -A ``teaser figure'' is an image, or set of images in one figure, that -are placed after all author and affiliation information, and before -the body of the article, spanning the page. If you wish to have such a -figure in your article, place the command immediately before the -\verb|\maketitle| command: -\begin{verbatim} - \begin{teaserfigure} - \includegraphics[width=\textwidth]{sampleteaser} - \caption{figure caption} - \Description{figure description} - \end{teaserfigure} -\end{verbatim} - -\section{Citations and Bibliographies} - -The use of \BibTeX\ for the preparation and formatting of one's -references is strongly recommended. Authors' names should be complete ---- use full first names (``Donald E. Knuth'') not initials -(``D. E. Knuth'') --- and the salient identifying features of a -reference should be included: title, year, volume, number, pages, -article DOI, etc. - -The bibliography is included in your source document with these two -commands, placed just before the \verb|\end{document}| command: -\begin{verbatim} - \bibliographystyle{ACM-Reference-Format} - \bibliography{bibfile} -\end{verbatim} -where ``\verb|bibfile|'' is the name, without the ``\verb|.bib|'' -suffix, of the \BibTeX\ file. - -Citations and references are numbered by default. A small number of -ACM publications have citations and references formatted in the -``author year'' style; for these exceptions, please include this -command in the {\bfseries preamble} (before the command -``\verb|\begin{document}|'') of your \LaTeX\ source: -\begin{verbatim} - \citestyle{acmauthoryear} -\end{verbatim} - - Some examples. A paginated journal article \cite{Abril07}, an - enumerated journal article \cite{Cohen07}, a reference to an entire - issue \cite{JCohen96}, a monograph (whole book) \cite{Kosiur01}, a - monograph/whole book in a series (see 2a in spec. document) - \cite{Harel79}, a divisible-book such as an anthology or compilation - \cite{Editor00} followed by the same example, however we only output - the series if the volume number is given \cite{Editor00a} (so - Editor00a's series should NOT be present since it has no vol. no.), - a chapter in a divisible book \cite{Spector90}, a chapter in a - divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for - publication \cite{rous08}, 'YYYYb'-test for prolific author - \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might - contain 'duplicate' DOI and URLs (some SIAM articles) - \cite{Kirschmer:2010:AEI:1958016.1958018}. Boris / Barbara Beeton: - multi-volume works as books \cite{MR781536} and \cite{MR781537}. A - couple of citations with DOIs: - \cite{2004:ITE:1009386.1010128,Kirschmer:2010:AEI:1958016.1958018}. Online - citations: \cite{TUGInstmem, Thornburg01, CTANacmart}. Artifacts: - \cite{R} and \cite{UMassCitations}. - -\section{Acknowledgments} - -Identification of funding sources and other support, and thanks to -individuals and groups that assisted in the research and the -preparation of the work should be included in an acknowledgment -section, which is placed just before the reference section in your -document. - -This section has a special environment: -\begin{verbatim} - \begin{acks} - ... - \end{acks} -\end{verbatim} -so that the information contained therein can be more easily collected -during the article metadata extraction phase, and to ensure -consistency in the spelling of the section heading. - -Authors should not prepare this section as a numbered or unnumbered {\verb|\section|}; please use the ``{\verb|acks|}'' environment. - -\section{Appendices} - -If your work needs an appendix, add it before the -``\verb|\end{document}|'' command at the conclusion of your source -document. - -Start the appendix with the ``\verb|appendix|'' command: -\begin{verbatim} - \appendix -\end{verbatim} -and note that in the appendix, sections are lettered, not -numbered. This document has two appendices, demonstrating the section -and subsection identification method. - -\section{SIGCHI Extended Abstracts} - -The ``\verb|sigchi-a|'' template style (available only in \LaTeX\ and -not in Word) produces a landscape-orientation formatted article, with -a wide left margin. Three environments are available for use with the -``\verb|sigchi-a|'' template style, and produce formatted output in -the margin: -\begin{itemize} -\item {\verb|sidebar|}: Place formatted text in the margin. -\item {\verb|marginfigure|}: Place a figure in the margin. -\item {\verb|margintable|}: Place a table in the margin. -\end{itemize} - -%% -%% The acknowledgments section is defined using the "acks" environment -%% (and NOT an unnumbered section). This ensures the proper -%% identification of the section in the article metadata, and the -%% consistent spelling of the heading. -\begin{acks} -To Robert, for the bagels and explaining CMYK and color spaces. -\end{acks} - -%% -%% The next two lines define the bibliography style to be used, and -%% the bibliography file. -\bibliographystyle{ACM-Reference-Format} -\bibliography{sample-base} - -%% -%% If your work has an appendix, this is the place to put it. -\appendix - -\section{Research Methods} - -\subsection{Part One} - -Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi -malesuada, quam in pulvinar varius, metus nunc fermentum urna, id -sollicitudin purus odio sit amet enim. Aliquam ullamcorper eu ipsum -vel mollis. Curabitur quis dictum nisl. Phasellus vel semper risus, et -lacinia dolor. Integer ultricies commodo sem nec semper. - -\subsection{Part Two} - -Etiam commodo feugiat nisl pulvinar pellentesque. Etiam auctor sodales -ligula, non varius nibh pulvinar semper. Suspendisse nec lectus non -ipsum convallis congue hendrerit vitae sapien. Donec at laoreet -eros. Vivamus non purus placerat, scelerisque diam eu, cursus -ante. Etiam aliquam tortor auctor efficitur mattis. - -\section{Online Resources} - -Nam id fermentum dui. Suspendisse sagittis tortor a nulla mollis, in -pulvinar ex pretium. Sed interdum orci quis metus euismod, et sagittis -enim maximus. Vestibulum gravida massa ut felis suscipit -congue. Quisque mattis elit a risus ultrices commodo venenatis eget -dui. Etiam sagittis eleifend elementum. - -Nam interdum magna at lectus dignissim, ac dignissim lorem -rhoncus. Maecenas eu arcu ac neque placerat aliquam. Nunc pulvinar -massa et mattis lacinia. - -\end{document} -\endinput -%% -%% End of file `sample-sigchi-a.tex'. |