diff options
Diffstat (limited to 'Build')
74 files changed, 517 insertions, 193 deletions
diff --git a/Build/source/configure b/Build/source/configure index 7b0694d1423..d8a2104e336 100755 --- a/Build/source/configure +++ b/Build/source/configure @@ -10754,6 +10754,8 @@ fi done +##tldbg KPSE_COMMON: TeX Live top-level (tar-pax dist-xz no-dist-gzip). +##tldbg KPSE_BASIC: Remember TeX Live top-level (tar-pax dist-xz no-dist-gzip) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -21091,7 +21093,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TeX specific libraries to build" >&5 $as_echo_n "checking for TeX specific libraries to build... " >&6; } -echo 'dbg:_KPSE_RECURSE called: list=texlibs, text=TeX specific libraries, cond=test "x$with_system_Kpse_pkg" != xyes && test "x$need_Kpse_pkg" = xyes, prefix=texk/.' >&5 +echo 'tldbg:_KPSE_RECURSE called: list=texlibs, text=TeX specific libraries, cond=test "x$with_system_[]Kpse_pkg" != xyes && test "x$need_[]Kpse_pkg" = xyes, prefix=texk/.' >&5 MAKE_SUBDIRS= CONF_SUBDIRS= if test -x $srcdir/texk/ptexenc/configure; then @@ -21217,6 +21219,7 @@ elif test "x$need_ptexenc:$with_system_ptexenc" = xyes:yes; then as_fn_error $? "did not find ptexenc" "$LINENO" 5 fi +##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi @@ -21225,6 +21228,7 @@ if test "x$with_zlib_libdir" != x && test "x$with_zlib_libdir" != xyes; then ZLIB_LIBS="-L$with_zlib_libdir $ZLIB_LIBS" fi +##tldbg _KPSE_LIB_FLAGS_SYSTEM: libpaper (paper). if test "x$with_libpaper_includes" != x && test "x$with_libpaper_includes" != xyes; then LIBPAPER_INCLUDES="-I$with_libpaper_includes" fi @@ -21338,6 +21342,7 @@ elif test "x$need_freetype2:$with_system_freetype2" = xyes:yes; then as_fn_error $? "did not find freetype-config required for system freetype2 library" "$LINENO" 5 fi +##tldbg _KPSE_LIB_FLAGS_SYSTEM: gd (gd). if test "x$with_gd_includes" != x && test "x$with_gd_includes" != xyes; then GD_INCLUDES="-I$with_gd_includes" fi @@ -21360,6 +21365,7 @@ elif test "x$need_cairo:$with_system_cairo" = xyes:yes; then as_fn_error $? "did not find cairo 1.12 or better" "$LINENO" 5 fi +##tldbg _KPSE_LIB_FLAGS_SYSTEM: gmp (gmp). if test "x$with_gmp_includes" != x && test "x$with_gmp_includes" != xyes; then GMP_INCLUDES="-I$with_gmp_includes" fi @@ -21368,6 +21374,7 @@ if test "x$with_gmp_libdir" != x && test "x$with_gmp_libdir" != xyes; then GMP_LIBS="-L$with_gmp_libdir $GMP_LIBS" fi +##tldbg _KPSE_LIB_FLAGS_SYSTEM: mpfr (mpfr). if test "x$with_mpfr_includes" != x && test "x$with_mpfr_includes" != xyes; then MPFR_INCLUDES="-I$with_mpfr_includes" fi @@ -21417,7 +21424,7 @@ elif test "x$need_teckit:$with_system_teckit" = xyes:yes; then as_fn_error $? "did not find teckit" "$LINENO" 5 fi -echo 'dbg:_KPSE_ICU_SYSTEM_FLAGS called.' >&5 +echo 'tldbg:KPSE_ICU_SYSTEM_FLAGS called.' >&5 if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}icu-config", so it can be a program name with args. set dummy ${ac_tool_prefix}icu-config; ac_word=$2 diff --git a/Build/source/libs/cairo/configure b/Build/source/libs/cairo/configure index 905af910bf5..e865138e344 100755 --- a/Build/source/libs/cairo/configure +++ b/Build/source/libs/cairo/configure @@ -4360,6 +4360,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember cairo () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -5711,7 +5712,7 @@ esac esac -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -6403,7 +6404,7 @@ else fi -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` @@ -6570,7 +6571,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup pixman (-lpixman) flags +##tldbg _KPSE_LIB_FLAGS: Setup pixman (-lpixman) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=pixman, libname=pixman, options=, tlincl=-IBLD/libs/pixman/include, tllib=BLD/libs/pixman/libpixman.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/pixman/include/pixman.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: pixman (pixman) . # Check whether --with-system-pixman was given. if test "${with_system_pixman+set}" = set; then : diff --git a/Build/source/libs/configure b/Build/source/libs/configure index a06e0d19a65..dc489388f8d 100755 --- a/Build/source/libs/configure +++ b/Build/source/libs/configure @@ -6063,6 +6063,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember libs () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6419,7 +6420,7 @@ WARNING_CFLAGS=$kpse_cv_warning_cflags { $as_echo "$as_me:${as_lineno-$LINENO}: checking for generic libraries to build" >&5 $as_echo_n "checking for generic libraries to build... " >&6; } -echo 'dbg:_KPSE_RECURSE called: list=libs, text=generic libraries, cond=test "x$with_system_Kpse_pkg" != xyes && test "x$need_Kpse_pkg" = xyes, prefix=.' >&5 +echo 'tldbg:_KPSE_RECURSE called: list=libs, text=generic libraries, cond=test "x$with_system_[]Kpse_pkg" != xyes && test "x$need_[]Kpse_pkg" = xyes, prefix=.' >&5 MAKE_SUBDIRS= CONF_SUBDIRS= if test -x $srcdir/harfbuzz/configure; then diff --git a/Build/source/libs/freetype2/configure b/Build/source/libs/freetype2/configure index 4fd0e5ba6b5..e41532187c0 100755 --- a/Build/source/libs/freetype2/configure +++ b/Build/source/libs/freetype2/configure @@ -3399,6 +3399,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember freetype2 () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/gd/configure b/Build/source/libs/gd/configure index bed21613bac..887ba808e7f 100755 --- a/Build/source/libs/gd/configure +++ b/Build/source/libs/gd/configure @@ -3808,6 +3808,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember gd () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -5469,11 +5470,13 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -5490,7 +5493,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -5712,7 +5716,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpng, libname=png, options=, tlincl=-IBLD/libs/libpng/include, tllib=BLD/libs/libpng/libpng.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpng/include/png.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpng (png) . # Check whether --with-system-libpng was given. if test "${with_system_libpng+set}" = set; then : @@ -5736,7 +5742,9 @@ ${top_builddir}/../../libs/libpng/include/png.h: cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : diff --git a/Build/source/libs/gmp/configure b/Build/source/libs/gmp/configure index 6a16ec2deca..707ca82cd22 100755 --- a/Build/source/libs/gmp/configure +++ b/Build/source/libs/gmp/configure @@ -3876,6 +3876,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember gmp () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -4930,7 +4931,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : diff --git a/Build/source/libs/gmp/native/configure b/Build/source/libs/gmp/native/configure index c217c1a8256..375fd18e85e 100755 --- a/Build/source/libs/gmp/native/configure +++ b/Build/source/libs/gmp/native/configure @@ -3397,6 +3397,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember gmp native () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/graphite2/configure b/Build/source/libs/graphite2/configure index 4d4b75974e8..62316e40d6e 100755 --- a/Build/source/libs/graphite2/configure +++ b/Build/source/libs/graphite2/configure @@ -3457,6 +3457,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember graphite2 () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/harfbuzz/configure b/Build/source/libs/harfbuzz/configure index b7075bddd05..54ed1d52c94 100755 --- a/Build/source/libs/harfbuzz/configure +++ b/Build/source/libs/harfbuzz/configure @@ -4031,6 +4031,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember harfbuzz (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6500,7 +6501,7 @@ $as_echo "#define HAVE_CXX11 1" >>confdefs.h -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -6597,7 +6598,7 @@ esac -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` @@ -6764,7 +6765,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags +##tldbg _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=graphite2, libname=graphite2, options=, tlincl=-IBLD/libs/graphite2/include -DGRAPHITE2_STATIC, tllib=BLD/libs/graphite2/libgraphite2.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/graphite2/include/graphite2/Font.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: graphite2 (graphite2) . # Check whether --with-system-graphite2 was given. if test "${with_system_graphite2+set}" = set; then : @@ -6788,14 +6791,17 @@ ${top_builddir}/../../libs/graphite2/include/graphite2/Font.h: cd ${top_builddir}/../../libs/graphite2 && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags +echo 'tldbg:KPSE_ICU_FLAGS called: more-icu-libs=, icu-config-args=.' >&5 +##tldbg _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=icu, libname=icuxxx, options=, tlincl=-DU_STATIC_IMPLEMENTATION -IBLD/libs/icu/include, tllib= BLD/libs/icu/icu-build/lib/libicuuc.a BLD/libs/icu/icu-build/lib/libicudata.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/icu/include/unicode/uversion.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: icu (icuxxx) . # Check whether --with-system-icu was given. if test "${with_system_icu+set}" = set; then : withval=$with_system_icu; fi if test "x$with_system_icu" = xyes; then - echo 'dbg:_KPSE_ICU_SYSTEM_FLAGS called.' >&5 + echo 'tldbg:KPSE_ICU_SYSTEM_FLAGS called.' >&5 if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}icu-config", so it can be a program name with args. set dummy ${ac_tool_prefix}icu-config; ac_word=$2 @@ -6997,6 +7003,12 @@ $(ICU_DEPEND): ${top_builddir}/../../libs/icu/include/unicode/uversion.h ${top_builddir}/../../libs/icu/include/unicode/uversion.h: cd ${top_builddir}/../../libs/icu && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi +# checking for openbsd to add -lpthread for icu. +case $build_os in +openbsd*) + eval ICUXXX_LIBS=\"$ICUXXX_LIBS -lpthread\" + ;; +esac # Functions and headers diff --git a/Build/source/libs/icu/configure b/Build/source/libs/icu/configure index 41ca7b556b6..4db0528a769 100755 --- a/Build/source/libs/icu/configure +++ b/Build/source/libs/icu/configure @@ -3465,6 +3465,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember icu () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/libpaper/configure b/Build/source/libs/libpaper/configure index f6824640dc8..50325444e29 100755 --- a/Build/source/libs/libpaper/configure +++ b/Build/source/libs/libpaper/configure @@ -3645,6 +3645,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember paper () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/libpng/configure b/Build/source/libs/libpng/configure index d7d5cd9a7c9..2bde70c5ce8 100755 --- a/Build/source/libs/libpng/configure +++ b/Build/source/libs/libpng/configure @@ -3801,6 +3801,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember libpng () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -4991,7 +4992,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -5853,11 +5854,13 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -5874,7 +5877,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" diff --git a/Build/source/libs/lua52/configure b/Build/source/libs/lua52/configure index 95cb49c31f8..1e63a43bfb2 100755 --- a/Build/source/libs/lua52/configure +++ b/Build/source/libs/lua52/configure @@ -3876,6 +3876,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember lua52 () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/lua53/configure b/Build/source/libs/lua53/configure index 5821e32ade8..4d2b9d85b62 100755 --- a/Build/source/libs/lua53/configure +++ b/Build/source/libs/lua53/configure @@ -3876,6 +3876,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember lua53 () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/luajit/configure b/Build/source/libs/luajit/configure index d31b7bc9ed3..56f4d0b75ff 100755 --- a/Build/source/libs/luajit/configure +++ b/Build/source/libs/luajit/configure @@ -3943,6 +3943,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember luajit () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/luajit/native/configure b/Build/source/libs/luajit/native/configure index 6668bba1ae1..cd3b9e8099d 100755 --- a/Build/source/libs/luajit/native/configure +++ b/Build/source/libs/luajit/native/configure @@ -3747,6 +3747,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember luajit native () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/mpfr/configure b/Build/source/libs/mpfr/configure index 89be344902d..0fde5cd23e8 100755 --- a/Build/source/libs/mpfr/configure +++ b/Build/source/libs/mpfr/configure @@ -3838,6 +3838,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember mpfr () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -4892,7 +4893,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -6559,11 +6560,13 @@ else fi -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup gmp (-lgmp) flags +##tldbg _KPSE_LIB_FLAGS: Setup gmp (-lgmp) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=gmp, libname=gmp, options=, tlincl=-IBLD/libs/gmp/include, tllib=BLD/libs/gmp/libgmp.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/gmp/include/gmp.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: gmp (gmp) . # Check whether --with-system-gmp was given. if test "${with_system_gmp+set}" = set; then : @@ -6580,7 +6583,8 @@ if test "${with_gmp_libdir+set}" = set; then : withval=$with_gmp_libdir; fi if test "x$with_system_gmp" = xyes; then - if test "x$with_gmp_includes" != x && test "x$with_gmp_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: gmp (gmp). +if test "x$with_gmp_includes" != x && test "x$with_gmp_includes" != xyes; then GMP_INCLUDES="-I$with_gmp_includes" fi GMP_LIBS="-lgmp" diff --git a/Build/source/libs/pixman/configure b/Build/source/libs/pixman/configure index 389ac85364d..a301df98c71 100755 --- a/Build/source/libs/pixman/configure +++ b/Build/source/libs/pixman/configure @@ -3852,6 +3852,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember pixman () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -5586,7 +5587,7 @@ _ACEOF esac -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : diff --git a/Build/source/libs/poppler/configure b/Build/source/libs/poppler/configure index 906dee62485..f4a342cbf93 100755 --- a/Build/source/libs/poppler/configure +++ b/Build/source/libs/poppler/configure @@ -4034,6 +4034,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember poppler (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6496,7 +6497,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -7654,11 +7655,13 @@ _ACEOF kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -7675,7 +7678,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" diff --git a/Build/source/libs/teckit/configure b/Build/source/libs/teckit/configure index db58dbb9777..2f99f2224e7 100755 --- a/Build/source/libs/teckit/configure +++ b/Build/source/libs/teckit/configure @@ -4009,6 +4009,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember tekcit () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6566,11 +6567,13 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -6587,7 +6590,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" diff --git a/Build/source/libs/xpdf/configure b/Build/source/libs/xpdf/configure index c23d5de6432..52a129f409d 100755 --- a/Build/source/libs/xpdf/configure +++ b/Build/source/libs/xpdf/configure @@ -3767,6 +3767,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember xpdf (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/libs/zlib/configure b/Build/source/libs/zlib/configure index 40ffe82aaae..e40b8d0ea1b 100755 --- a/Build/source/libs/zlib/configure +++ b/Build/source/libs/zlib/configure @@ -3646,6 +3646,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember zlib () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -4700,7 +4701,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : diff --git a/Build/source/libs/zziplib/configure b/Build/source/libs/zziplib/configure index 511990a7047..26675494852 100755 --- a/Build/source/libs/zziplib/configure +++ b/Build/source/libs/zziplib/configure @@ -3978,6 +3978,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember zziplib () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -5105,7 +5106,7 @@ $as_echo "no, using $LN_S" >&6; } fi -echo 'dbg:_KPSE_COMPILER_VISIBILITY called.' >&5 +echo 'tldbg:KPSE_COMPILER_VISIBILITY called.' >&5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking CFLAGS for C to hide external symbols" >&5 $as_echo_n "checking CFLAGS for C to hide external symbols... " >&6; } if ${kpse_cv_visibility_cflags+:} false; then : @@ -6684,11 +6685,13 @@ done kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -6705,7 +6708,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" diff --git a/Build/source/texk/afm2pl/configure b/Build/source/texk/afm2pl/configure index 258c1d00d3d..74af46b8937 100755 --- a/Build/source/texk/afm2pl/configure +++ b/Build/source/texk/afm2pl/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: afm2pl (). +##tldbg KPSE_BASIC: Remember afm2pl () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13525,11 +13527,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14921,7 +14923,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/bibtex-x/configure b/Build/source/texk/bibtex-x/configure index a2ef86597a6..8dc8cce21df 100755 --- a/Build/source/texk/bibtex-x/configure +++ b/Build/source/texk/bibtex-x/configure @@ -8081,6 +8081,8 @@ fi done +##tldbg KPSE_COMMON: bibtex-x (no-define). +##tldbg KPSE_BASIC: Remember bibtex-x (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -17647,11 +17649,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -19308,7 +19310,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -19368,14 +19372,17 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags +echo 'tldbg:KPSE_ICU_FLAGS called: more-icu-libs=icuio icui18n, icu-config-args=--ldflags-icuio.' >&5 +##tldbg _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=icu, libname=icuxxx, options=, tlincl=-DU_STATIC_IMPLEMENTATION -IBLD/libs/icu/include, tllib=BLD/libs/icu/icu-build/lib/libicuio.a BLD/libs/icu/icu-build/lib/libicui18n.a BLD/libs/icu/icu-build/lib/libicuuc.a BLD/libs/icu/icu-build/lib/libicudata.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/icu/include/unicode/uversion.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: icu (icuxxx) . # Check whether --with-system-icu was given. if test "${with_system_icu+set}" = set; then : withval=$with_system_icu; fi if test "x$with_system_icu" = xyes; then - echo 'dbg:_KPSE_ICU_SYSTEM_FLAGS called.' >&5 + echo 'tldbg:KPSE_ICU_SYSTEM_FLAGS called.' >&5 if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}icu-config", so it can be a program name with args. set dummy ${ac_tool_prefix}icu-config; ac_word=$2 @@ -19577,6 +19584,12 @@ $(ICU_DEPEND): ${top_builddir}/../../libs/icu/include/unicode/uversion.h ${top_builddir}/../../libs/icu/include/unicode/uversion.h: cd ${top_builddir}/../../libs/icu && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi +# checking for openbsd to add -lpthread for icu. +case $build_os in +openbsd*) + eval ICUXXX_LIBS=\"$ICUXXX_LIBS -lpthread\" + ;; +esac if test "x$enable_bibtex8" != xno; then diff --git a/Build/source/texk/chktex/configure b/Build/source/texk/chktex/configure index ed68aae37b0..3dc361addec 100755 --- a/Build/source/texk/chktex/configure +++ b/Build/source/texk/chktex/configure @@ -7849,6 +7849,8 @@ fi done +##tldbg KPSE_COMMON: chktex (). +##tldbg KPSE_BASIC: Remember chktex () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13794,11 +13796,11 @@ PERL5='/usr/bin/env perl' kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15190,7 +15192,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/cjkutils/configure b/Build/source/texk/cjkutils/configure index ca47fbf6034..2c966ac5546 100755 --- a/Build/source/texk/cjkutils/configure +++ b/Build/source/texk/cjkutils/configure @@ -7845,6 +7845,8 @@ fi done +##tldbg KPSE_COMMON: cjkutils (no-define). +##tldbg KPSE_BASIC: Remember cjkutils (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13533,11 +13535,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14929,7 +14931,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/configure b/Build/source/texk/configure index 8976f562206..8bf77a77b7f 100755 --- a/Build/source/texk/configure +++ b/Build/source/texk/configure @@ -6063,6 +6063,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember texk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6419,7 +6420,7 @@ WARNING_CFLAGS=$kpse_cv_warning_cflags { $as_echo "$as_me:${as_lineno-$LINENO}: checking for TeXk programs to build" >&5 $as_echo_n "checking for TeXk programs to build... " >&6; } -echo 'dbg:_KPSE_RECURSE called: list=texk, text=TeXk programs, cond=test "x$enable_Kpse_pkg" = xyes, prefix=.' >&5 +echo 'tldbg:_KPSE_RECURSE called: list=texk, text=TeXk programs, cond=test "x$enable_[]Kpse_pkg" = xyes, prefix=.' >&5 MAKE_SUBDIRS= CONF_SUBDIRS= if test -x $srcdir/web2c/configure; then diff --git a/Build/source/texk/detex/configure b/Build/source/texk/detex/configure index 66bb28e34f4..09686c9e347 100755 --- a/Build/source/texk/detex/configure +++ b/Build/source/texk/detex/configure @@ -7839,6 +7839,8 @@ fi done +##tldbg KPSE_COMMON: detex (). +##tldbg KPSE_BASIC: Remember detex () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13667,11 +13669,11 @@ ac_config_headers="$ac_config_headers c-auto.h:c-auto.in" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15063,7 +15065,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dtl/configure b/Build/source/texk/dtl/configure index 5438e526c2e..fcd2ff667d5 100755 --- a/Build/source/texk/dtl/configure +++ b/Build/source/texk/dtl/configure @@ -8017,6 +8017,8 @@ fi done +##tldbg KPSE_COMMON: dtl (). +##tldbg KPSE_BASIC: Remember dtl () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13717,11 +13719,11 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15113,7 +15115,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dvi2tty/configure b/Build/source/texk/dvi2tty/configure index 467d5252b75..f924783173c 100755 --- a/Build/source/texk/dvi2tty/configure +++ b/Build/source/texk/dvi2tty/configure @@ -7843,6 +7843,8 @@ fi done +##tldbg KPSE_COMMON: dvi2tty (). +##tldbg KPSE_BASIC: Remember dvi2tty () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13476,11 +13478,11 @@ ac_config_headers="$ac_config_headers c-auto.h:c-auto.in" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14872,7 +14874,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14932,7 +14936,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags +##tldbg _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=ptexenc, libname=ptexenc, options=lt, tlincl=-IBLD/texk/ptexenc -ISRC/texk/ptexenc, tllib=BLD/texk/ptexenc/libptexenc.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc/*.h, rebuildblddeps=.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: ptexenc (ptexenc) lt. # Check whether --with-system-ptexenc was given. if test "${with_system_ptexenc+set}" = set; then : diff --git a/Build/source/texk/dvidvi/configure b/Build/source/texk/dvidvi/configure index 75ca4dd03b0..74cdac3184d 100755 --- a/Build/source/texk/dvidvi/configure +++ b/Build/source/texk/dvidvi/configure @@ -7837,6 +7837,8 @@ fi done +##tldbg KPSE_COMMON: dvidvi (). +##tldbg KPSE_BASIC: Remember dvidvi () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13471,11 +13473,11 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14867,7 +14869,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dviljk/configure b/Build/source/texk/dviljk/configure index 7c5197384e5..3aa3c85e2b8 100755 --- a/Build/source/texk/dviljk/configure +++ b/Build/source/texk/dviljk/configure @@ -8022,6 +8022,8 @@ fi done +##tldbg KPSE_COMMON: dviljk (no-define). +##tldbg KPSE_BASIC: Remember dviljk (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13725,11 +13727,11 @@ done kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15121,7 +15123,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dviout-util/configure b/Build/source/texk/dviout-util/configure index 4a9dca566f7..105cf581736 100755 --- a/Build/source/texk/dviout-util/configure +++ b/Build/source/texk/dviout-util/configure @@ -7842,6 +7842,8 @@ fi done +##tldbg KPSE_COMMON: dviout-util (). +##tldbg KPSE_BASIC: Remember dviout-util () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13480,11 +13482,11 @@ $as_echo "#define TL_VERSION \"TeX Live 2019/dev\"" >>confdefs.h kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14876,7 +14878,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14936,7 +14940,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags +##tldbg _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=ptexenc, libname=ptexenc, options=lt, tlincl=-IBLD/texk/ptexenc -ISRC/texk/ptexenc, tllib=BLD/texk/ptexenc/libptexenc.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc/*.h, rebuildblddeps=.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: ptexenc (ptexenc) lt. # Check whether --with-system-ptexenc was given. if test "${with_system_ptexenc+set}" = set; then : diff --git a/Build/source/texk/dvipdfm-x/configure b/Build/source/texk/dvipdfm-x/configure index be7b27d1670..c2175c16a47 100755 --- a/Build/source/texk/dvipdfm-x/configure +++ b/Build/source/texk/dvipdfm-x/configure @@ -8052,6 +8052,8 @@ fi done +##tldbg KPSE_COMMON: dvipdfm-x (). +##tldbg KPSE_BASIC: Remember dvipdfm-x () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -14333,11 +14335,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15729,7 +15731,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -15789,7 +15793,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -15806,7 +15812,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -15865,7 +15872,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpng, libname=png, options=, tlincl=-IBLD/libs/libpng/include, tllib=BLD/libs/libpng/libpng.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpng/include/png.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpng (png) . # Check whether --with-system-libpng was given. if test "${with_system_libpng+set}" = set; then : @@ -15889,7 +15898,9 @@ ${top_builddir}/../../libs/libpng/include/png.h: cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup libpaper (-lpaper) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpaper (-lpaper) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpaper, libname=paper, options=, tlincl=-IBLD/libs/libpaper/include, tllib=BLD/libs/libpaper/libpaper.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpaper/include/paper.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpaper (paper) . # Check whether --with-system-libpaper was given. if test "${with_system_libpaper+set}" = set; then : @@ -15906,7 +15917,8 @@ if test "${with_libpaper_libdir+set}" = set; then : withval=$with_libpaper_libdir; fi if test "x$with_system_libpaper" = xyes; then - if test "x$with_libpaper_includes" != x && test "x$with_libpaper_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: libpaper (paper). +if test "x$with_libpaper_includes" != x && test "x$with_libpaper_includes" != xyes; then LIBPAPER_INCLUDES="-I$with_libpaper_includes" fi LIBPAPER_LIBS="-lpaper" diff --git a/Build/source/texk/dvipng/configure b/Build/source/texk/dvipng/configure index 0200978d6e7..d5baa649345 100755 --- a/Build/source/texk/dvipng/configure +++ b/Build/source/texk/dvipng/configure @@ -7897,6 +7897,8 @@ fi done +##tldbg KPSE_COMMON: dvipng (). +##tldbg KPSE_BASIC: Remember dvipng () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -14676,11 +14678,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -16072,7 +16074,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -16132,7 +16136,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -16149,7 +16155,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -16208,7 +16215,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpng, libname=png, options=, tlincl=-IBLD/libs/libpng/include, tllib=BLD/libs/libpng/libpng.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpng/include/png.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpng (png) . # Check whether --with-system-libpng was given. if test "${with_system_libpng+set}" = set; then : @@ -16232,7 +16241,9 @@ ${top_builddir}/../../libs/libpng/include/png.h: cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : @@ -16393,7 +16404,9 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $kpse_cv_have_win32" >&5 $as_echo "$kpse_cv_have_win32" >&6; } -## _KPSE_LIB_FLAGS: Setup gd (-lgd) flags +##tldbg _KPSE_LIB_FLAGS: Setup gd (-lgd) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=gd, libname=gd, options=, tlincl=-IBLD/libs/gd/include, tllib=BLD/libs/gd/libgd.a, tlextra=test "x$kpse_cv_have_win32" = xno || GD_INCLUDES="$GD_INCLUDES -DBGDWIN32 -DNONDLL", rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/gd/include/gd.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: gd (gd) . # Check whether --with-system-gd was given. if test "${with_system_gd+set}" = set; then : @@ -16410,7 +16423,8 @@ if test "${with_gd_libdir+set}" = set; then : withval=$with_gd_libdir; fi if test "x$with_system_gd" = xyes; then - if test "x$with_gd_includes" != x && test "x$with_gd_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: gd (gd). +if test "x$with_gd_includes" != x && test "x$with_gd_includes" != xyes; then GD_INCLUDES="-I$with_gd_includes" fi GD_LIBS="-lgd" diff --git a/Build/source/texk/dvipos/configure b/Build/source/texk/dvipos/configure index 4f14b51356d..b148776405f 100755 --- a/Build/source/texk/dvipos/configure +++ b/Build/source/texk/dvipos/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: dvipos (). +##tldbg KPSE_BASIC: Remember dvipos () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13524,11 +13526,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14920,7 +14922,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dvipsk/configure b/Build/source/texk/dvipsk/configure index f433aa3262f..115709edd13 100755 --- a/Build/source/texk/dvipsk/configure +++ b/Build/source/texk/dvipsk/configure @@ -8020,6 +8020,8 @@ fi done +##tldbg KPSE_COMMON: dvipsk (). +##tldbg KPSE_BASIC: Remember dvipsk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13749,11 +13751,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15145,7 +15147,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/dvipsk/squeeze/configure b/Build/source/texk/dvipsk/squeeze/configure index 287ff9333c4..22c8c78f8de 100755 --- a/Build/source/texk/dvipsk/squeeze/configure +++ b/Build/source/texk/dvipsk/squeeze/configure @@ -3394,6 +3394,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember dvipsk squeeze () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/texk/dvisvgm/configure b/Build/source/texk/dvisvgm/configure index b08fa5896e6..8bd6d85aa15 100755 --- a/Build/source/texk/dvisvgm/configure +++ b/Build/source/texk/dvisvgm/configure @@ -8184,6 +8184,8 @@ fi done +##tldbg KPSE_COMMON: dvisvgm (). +##tldbg KPSE_BASIC: Remember dvisvgm () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -19794,11 +19796,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -21455,7 +21457,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -21515,7 +21519,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -21532,7 +21538,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -21591,7 +21598,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : @@ -21706,7 +21715,9 @@ ${top_builddir}/../../libs/freetype2/freetype2/ft2build.h: cd ${top_builddir}/../../libs/freetype2 && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -21723,7 +21734,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" diff --git a/Build/source/texk/gregorio/configure b/Build/source/texk/gregorio/configure index 41c8983de8d..5148e9a8fa3 100755 --- a/Build/source/texk/gregorio/configure +++ b/Build/source/texk/gregorio/configure @@ -8023,6 +8023,8 @@ fi done +##tldbg KPSE_COMMON: gregorio (). +##tldbg KPSE_BASIC: Remember gregorio () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -14055,11 +14057,11 @@ PERL5='/usr/bin/env perl' kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15451,7 +15453,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/gsftopk/configure b/Build/source/texk/gsftopk/configure index 9e0e1d2ae10..639af528ecc 100755 --- a/Build/source/texk/gsftopk/configure +++ b/Build/source/texk/gsftopk/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: gsftopk (). +##tldbg KPSE_BASIC: Remember gsftopk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13844,11 +13846,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15240,7 +15242,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/kpathsea/configure b/Build/source/texk/kpathsea/configure index 0c352c98159..6537f0559c2 100755 --- a/Build/source/texk/kpathsea/configure +++ b/Build/source/texk/kpathsea/configure @@ -8048,8 +8048,8 @@ fi done -## KPSE_COMMON: kpathsea (). -## KPSE_BASIC: Remember kpathsea () as Kpse_Package (for future messages) +##tldbg KPSE_COMMON: kpathsea (). +##tldbg KPSE_BASIC: Remember kpathsea () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/texk/lcdf-typetools/configure b/Build/source/texk/lcdf-typetools/configure index 6dc791fd0a4..a5049f8968f 100755 --- a/Build/source/texk/lcdf-typetools/configure +++ b/Build/source/texk/lcdf-typetools/configure @@ -8453,6 +8453,8 @@ fi done +##tldbg KPSE_COMMON: lcdf-typetools (). +##tldbg KPSE_BASIC: Remember lcdf-typetools () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -19532,11 +19534,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -21193,7 +21195,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/makeindexk/configure b/Build/source/texk/makeindexk/configure index c191cdae309..1f65656ff10 100755 --- a/Build/source/texk/makeindexk/configure +++ b/Build/source/texk/makeindexk/configure @@ -7837,6 +7837,8 @@ fi done +##tldbg KPSE_COMMON: makeindexk (no-define). +##tldbg KPSE_BASIC: Remember makeindexk (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13492,11 +13494,11 @@ done kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14888,7 +14890,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/makejvf/configure b/Build/source/texk/makejvf/configure index 0e9ff22659a..d1a269deef8 100755 --- a/Build/source/texk/makejvf/configure +++ b/Build/source/texk/makejvf/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: makejvfk (no-define). +##tldbg KPSE_BASIC: Remember makejvfk (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13472,11 +13474,11 @@ done kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14868,7 +14870,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14928,7 +14932,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags +##tldbg _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=ptexenc, libname=ptexenc, options=lt, tlincl=-IBLD/texk/ptexenc -ISRC/texk/ptexenc, tllib=BLD/texk/ptexenc/libptexenc.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc/*.h, rebuildblddeps=.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: ptexenc (ptexenc) lt. # Check whether --with-system-ptexenc was given. if test "${with_system_ptexenc+set}" = set; then : diff --git a/Build/source/texk/mendexk/configure b/Build/source/texk/mendexk/configure index f2d9b3faab3..2f6be10b24b 100755 --- a/Build/source/texk/mendexk/configure +++ b/Build/source/texk/mendexk/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: mendexk (no-define). +##tldbg KPSE_BASIC: Remember mendexk (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13499,11 +13501,11 @@ esac kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14895,7 +14897,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14955,7 +14959,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags +##tldbg _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=ptexenc, libname=ptexenc, options=lt, tlincl=-IBLD/texk/ptexenc -ISRC/texk/ptexenc, tllib=BLD/texk/ptexenc/libptexenc.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc/*.h, rebuildblddeps=.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: ptexenc (ptexenc) lt. # Check whether --with-system-ptexenc was given. if test "${with_system_ptexenc+set}" = set; then : diff --git a/Build/source/texk/musixtnt/configure b/Build/source/texk/musixtnt/configure index 02d76a14068..fc83523e0cd 100755 --- a/Build/source/texk/musixtnt/configure +++ b/Build/source/texk/musixtnt/configure @@ -7836,6 +7836,8 @@ fi done +##tldbg KPSE_COMMON: musixtnt (). +##tldbg KPSE_BASIC: Remember musixtnt () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13563,11 +13565,11 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14959,7 +14961,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/ps2pk/configure b/Build/source/texk/ps2pk/configure index 6ee4fe78d67..475349d659d 100755 --- a/Build/source/texk/ps2pk/configure +++ b/Build/source/texk/ps2pk/configure @@ -7836,6 +7836,8 @@ fi done +##tldbg KPSE_COMMON: ps2pkm (no-define). +##tldbg KPSE_BASIC: Remember ps2pkm (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13779,11 +13781,11 @@ test -n "$KPSEWHICH" || KPSEWHICH="false" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15175,7 +15177,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/psutils/configure b/Build/source/texk/psutils/configure index 012be71770c..a973f65845c 100755 --- a/Build/source/texk/psutils/configure +++ b/Build/source/texk/psutils/configure @@ -7853,6 +7853,8 @@ fi done +##tldbg KPSE_COMMON: psutils (). +##tldbg KPSE_BASIC: Remember psutils () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13489,11 +13491,11 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14885,7 +14887,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14945,7 +14949,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup libpaper (-lpaper) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpaper (-lpaper) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpaper, libname=paper, options=, tlincl=-IBLD/libs/libpaper/include, tllib=BLD/libs/libpaper/libpaper.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpaper/include/paper.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpaper (paper) . # Check whether --with-system-libpaper was given. if test "${with_system_libpaper+set}" = set; then : @@ -14962,7 +14968,8 @@ if test "${with_libpaper_libdir+set}" = set; then : withval=$with_libpaper_libdir; fi if test "x$with_system_libpaper" = xyes; then - if test "x$with_libpaper_includes" != x && test "x$with_libpaper_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: libpaper (paper). +if test "x$with_libpaper_includes" != x && test "x$with_libpaper_includes" != xyes; then LIBPAPER_INCLUDES="-I$with_libpaper_includes" fi LIBPAPER_LIBS="-lpaper" diff --git a/Build/source/texk/ptexenc/configure b/Build/source/texk/ptexenc/configure index 777ed203e75..08a4832bb82 100755 --- a/Build/source/texk/ptexenc/configure +++ b/Build/source/texk/ptexenc/configure @@ -7844,6 +7844,8 @@ fi done +##tldbg KPSE_COMMON: ptexenc (). +##tldbg KPSE_BASIC: Remember ptexenc () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13474,11 +13476,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14870,7 +14872,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/seetexk/configure b/Build/source/texk/seetexk/configure index 35e0893a120..f87119f346a 100755 --- a/Build/source/texk/seetexk/configure +++ b/Build/source/texk/seetexk/configure @@ -7835,6 +7835,8 @@ fi done +##tldbg KPSE_COMMON: seetexk (). +##tldbg KPSE_BASIC: Remember seetexk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13529,11 +13531,11 @@ _ACEOF kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14925,7 +14927,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/tex4htk/configure b/Build/source/texk/tex4htk/configure index c13e920ed80..a971b290db8 100755 --- a/Build/source/texk/tex4htk/configure +++ b/Build/source/texk/tex4htk/configure @@ -8023,6 +8023,8 @@ fi done +##tldbg KPSE_COMMON: tex4htk (). +##tldbg KPSE_BASIC: Remember tex4htk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13690,11 +13692,11 @@ _ACEOF kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15086,7 +15088,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/ttf2pk2/configure b/Build/source/texk/ttf2pk2/configure index e5958737c5d..8993c5d3ad2 100755 --- a/Build/source/texk/ttf2pk2/configure +++ b/Build/source/texk/ttf2pk2/configure @@ -7854,6 +7854,8 @@ fi done +##tldbg KPSE_COMMON: ttf2pk (no-define). +##tldbg KPSE_BASIC: Remember ttf2pk (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13535,11 +13537,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -14931,7 +14933,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -14991,7 +14995,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -15008,7 +15014,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -15067,7 +15074,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : diff --git a/Build/source/texk/ttfdump/configure b/Build/source/texk/ttfdump/configure index f547c6fe798..5e4efe7104c 100755 --- a/Build/source/texk/ttfdump/configure +++ b/Build/source/texk/ttfdump/configure @@ -8018,6 +8018,8 @@ fi done +##tldbg KPSE_COMMON: ttfdump (). +##tldbg KPSE_BASIC: Remember ttfdump () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -13685,11 +13687,11 @@ ac_config_headers="$ac_config_headers config.h" kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -15081,7 +15083,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : diff --git a/Build/source/texk/upmendex/configure b/Build/source/texk/upmendex/configure index dc2f5273fe7..3e358f5c9df 100755 --- a/Build/source/texk/upmendex/configure +++ b/Build/source/texk/upmendex/configure @@ -8647,6 +8647,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu +##tldbg KPSE_COMMON: upmendex (no-define). +##tldbg KPSE_BASIC: Remember upmendex (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -17788,11 +17790,11 @@ esac kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -19449,7 +19451,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -19509,14 +19513,17 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags +echo 'tldbg:KPSE_ICU_FLAGS called: more-icu-libs=icuio icui18n, icu-config-args=--ldflags-icuio.' >&5 +##tldbg _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=icu, libname=icuxxx, options=, tlincl=-DU_STATIC_IMPLEMENTATION -IBLD/libs/icu/include, tllib=BLD/libs/icu/icu-build/lib/libicuio.a BLD/libs/icu/icu-build/lib/libicui18n.a BLD/libs/icu/icu-build/lib/libicuuc.a BLD/libs/icu/icu-build/lib/libicudata.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/icu/include/unicode/uversion.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: icu (icuxxx) . # Check whether --with-system-icu was given. if test "${with_system_icu+set}" = set; then : withval=$with_system_icu; fi if test "x$with_system_icu" = xyes; then - echo 'dbg:_KPSE_ICU_SYSTEM_FLAGS called.' >&5 + echo 'tldbg:KPSE_ICU_SYSTEM_FLAGS called.' >&5 if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}icu-config", so it can be a program name with args. set dummy ${ac_tool_prefix}icu-config; ac_word=$2 @@ -19718,6 +19725,12 @@ $(ICU_DEPEND): ${top_builddir}/../../libs/icu/include/unicode/uversion.h ${top_builddir}/../../libs/icu/include/unicode/uversion.h: cd ${top_builddir}/../../libs/icu && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi +# checking for openbsd to add -lpthread for icu. +case $build_os in +openbsd*) + eval ICUXXX_LIBS=\"$ICUXXX_LIBS -lpthread\" + ;; +esac ac_config_files="$ac_config_files Makefile" diff --git a/Build/source/texk/web2c/configure b/Build/source/texk/web2c/configure index d0f95e3081a..a8308b3a400 100755 --- a/Build/source/texk/web2c/configure +++ b/Build/source/texk/web2c/configure @@ -8667,6 +8667,8 @@ fi done +##tldbg KPSE_COMMON: web2c programs (). +##tldbg KPSE_BASIC: Remember web2c programs () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -23236,11 +23238,11 @@ _ACEOF kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -24816,7 +24818,9 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_link="./libtool --mode=link --tag=CC $ac_link" -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -24876,7 +24880,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags +##tldbg _KPSE_LIB_FLAGS: Setup ptexenc (-lptexenc) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=ptexenc, libname=ptexenc, options=lt, tlincl=-IBLD/texk/ptexenc -ISRC/texk/ptexenc, tllib=BLD/texk/ptexenc/libptexenc.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc/*.h, rebuildblddeps=.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: ptexenc (ptexenc) lt. # Check whether --with-system-ptexenc was given. if test "${with_system_ptexenc+set}" = set; then : @@ -24898,7 +24904,9 @@ $(PTEXENC_DEPEND): ${top_srcdir}/../ptexenc/*.c ${top_srcdir}/../ptexenc/ptexenc cd ${top_builddir}/../ptexenc && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -24915,7 +24923,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -24974,7 +24983,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup lua53 (-ltexlua53) flags +##tldbg _KPSE_LIB_FLAGS: Setup lua53 (-ltexlua53) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=lua53, libname=texlua53, options=lt tree, tlincl=-IBLD/libs/lua53/include, tllib=BLD/libs/lua53/libtexlua53.la, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/lua53/include/lua.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: lua53 (texlua53) lt tree. LUA53_INCLUDES="-I$kpse_BLD/libs/lua53/include" LUA53_LIBS="$kpse_BLD/libs/lua53/libtexlua53.la" LUA53_DEPEND='${top_builddir}/../../libs/lua53/libtexlua53.la' @@ -24984,7 +24995,9 @@ $(LUA53_DEPEND): ${top_builddir}/../../libs/lua53/include/lua.h ${top_builddir}/../../libs/lua53/include/lua.h: cd ${top_builddir}/../../libs/lua53 && $(MAKE) $(AM_MAKEFLAGS) rebuild' -## _KPSE_LIB_FLAGS: Setup lua52 (-ltexlua52) flags +##tldbg _KPSE_LIB_FLAGS: Setup lua52 (-ltexlua52) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=lua52, libname=texlua52, options=lt tree, tlincl=-IBLD/libs/lua52/include, tllib=BLD/libs/lua52/libtexlua52.la, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/lua52/include/lua.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: lua52 (texlua52) lt tree. LUA52_INCLUDES="-I$kpse_BLD/libs/lua52/include" LUA52_LIBS="$kpse_BLD/libs/lua52/libtexlua52.la" LUA52_DEPEND='${top_builddir}/../../libs/lua52/libtexlua52.la' @@ -24994,7 +25007,9 @@ $(LUA52_DEPEND): ${top_builddir}/../../libs/lua52/include/lua.h ${top_builddir}/../../libs/lua52/include/lua.h: cd ${top_builddir}/../../libs/lua52 && $(MAKE) $(AM_MAKEFLAGS) rebuild' -## _KPSE_LIB_FLAGS: Setup luajit (-ltexluajit) flags +##tldbg _KPSE_LIB_FLAGS: Setup luajit (-ltexluajit) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=luajit, libname=texluajit, options=lt tree, tlincl=-IBLD/libs/luajit/include, tllib=BLD/libs/luajit/libtexluajit.la, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/luajit/include/luajit.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: luajit (texluajit) lt tree. LUAJIT_INCLUDES="-I$kpse_BLD/libs/luajit/include" LUAJIT_LIBS="$kpse_BLD/libs/luajit/libtexluajit.la" LUAJIT_DEPEND='${top_builddir}/../../libs/luajit/libtexluajit.la' @@ -25004,7 +25019,9 @@ $(LUAJIT_DEPEND): ${top_builddir}/../../libs/luajit/include/luajit.h ${top_builddir}/../../libs/luajit/include/luajit.h: cd ${top_builddir}/../../libs/luajit && $(MAKE) $(AM_MAKEFLAGS) rebuild' -## _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags +##tldbg _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=libpng, libname=png, options=, tlincl=-IBLD/libs/libpng/include, tllib=BLD/libs/libpng/libpng.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/libpng/include/png.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: libpng (png) . # Check whether --with-system-libpng was given. if test "${with_system_libpng+set}" = set; then : @@ -25028,7 +25045,9 @@ ${top_builddir}/../../libs/libpng/include/png.h: cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : @@ -25143,7 +25162,9 @@ ${top_builddir}/../../libs/freetype2/freetype2/ft2build.h: cd ${top_builddir}/../../libs/freetype2 && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup pixman (-lpixman) flags +##tldbg _KPSE_LIB_FLAGS: Setup pixman (-lpixman) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=pixman, libname=pixman, options=, tlincl=-IBLD/libs/pixman/include, tllib=BLD/libs/pixman/libpixman.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/pixman/include/pixman.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: pixman (pixman) . # Check whether --with-system-pixman was given. if test "${with_system_pixman+set}" = set; then : @@ -25167,7 +25188,9 @@ ${top_builddir}/../../libs/pixman/include/pixman.h: cd ${top_builddir}/../../libs/pixman && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup cairo (-lcairo) flags +##tldbg _KPSE_LIB_FLAGS: Setup cairo (-lcairo) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=cairo, libname=cairo, options=, tlincl=-IBLD/libs/cairo/cairo, tllib=BLD/libs/cairo/libcairo.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/cairo/cairo/cairo.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: cairo (cairo) . # Check whether --with-system-cairo was given. if test "${with_system_cairo+set}" = set; then : @@ -25191,7 +25214,9 @@ ${top_builddir}/../../libs/cairo/cairo/cairo.h: cd ${top_builddir}/../../libs/cairo && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup gmp (-lgmp) flags +##tldbg _KPSE_LIB_FLAGS: Setup gmp (-lgmp) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=gmp, libname=gmp, options=, tlincl=-IBLD/libs/gmp/include, tllib=BLD/libs/gmp/libgmp.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/gmp/include/gmp.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: gmp (gmp) . # Check whether --with-system-gmp was given. if test "${with_system_gmp+set}" = set; then : @@ -25208,7 +25233,8 @@ if test "${with_gmp_libdir+set}" = set; then : withval=$with_gmp_libdir; fi if test "x$with_system_gmp" = xyes; then - if test "x$with_gmp_includes" != x && test "x$with_gmp_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: gmp (gmp). +if test "x$with_gmp_includes" != x && test "x$with_gmp_includes" != xyes; then GMP_INCLUDES="-I$with_gmp_includes" fi GMP_LIBS="-lgmp" @@ -25226,7 +25252,9 @@ ${top_builddir}/../../libs/gmp/include/gmp.h: cd ${top_builddir}/../../libs/gmp && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup mpfr (-lmpfr) flags +##tldbg _KPSE_LIB_FLAGS: Setup mpfr (-lmpfr) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=mpfr, libname=mpfr, options=, tlincl=-IBLD/libs/mpfr/include, tllib=BLD/libs/mpfr/libmpfr.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/mpfr/include/mpfr.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: mpfr (mpfr) . # Check whether --with-system-mpfr was given. if test "${with_system_mpfr+set}" = set; then : @@ -25243,7 +25271,8 @@ if test "${with_mpfr_libdir+set}" = set; then : withval=$with_mpfr_libdir; fi if test "x$with_system_mpfr" = xyes; then - if test "x$with_mpfr_includes" != x && test "x$with_mpfr_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: mpfr (mpfr). +if test "x$with_mpfr_includes" != x && test "x$with_mpfr_includes" != xyes; then MPFR_INCLUDES="-I$with_mpfr_includes" fi MPFR_LIBS="-lmpfr" @@ -25261,7 +25290,9 @@ ${top_builddir}/../../libs/mpfr/include/mpfr.h: cd ${top_builddir}/../../libs/mpfr && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup poppler (-lpoppler) flags +##tldbg _KPSE_LIB_FLAGS: Setup poppler (-lpoppler) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=poppler, libname=poppler, options=, tlincl=-IBLD/libs/poppler/include, tllib=BLD/libs/poppler/libpoppler.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/poppler/include/Stream.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: poppler (poppler) . # Check whether --with-system-poppler was given. if test "${with_system_poppler+set}" = set; then : @@ -25289,7 +25320,9 @@ ${top_builddir}/../../libs/poppler/include/Stream.h: fi test "x$kpse_cv_have_win32" = xno || POPPLER_LIBS="$POPPLER_LIBS -lgdi32" -## _KPSE_LIB_FLAGS: Setup xpdf (-lxpdf) flags +##tldbg _KPSE_LIB_FLAGS: Setup xpdf (-lxpdf) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=xpdf, libname=xpdf, options=, tlincl=-DPDF_PARSER_ONLY -IBLD/libs/xpdf -IBLD/libs/xpdf/goo -IBLD/libs/xpdf/xpdf, tllib=BLD/libs/xpdf/libxpdf.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/xpdf/xpdf/Stream.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: xpdf (xpdf) . # Check whether --with-system-xpdf was given. if test "${with_system_xpdf+set}" = set; then : @@ -25317,7 +25350,9 @@ ${top_builddir}/../../libs/xpdf/xpdf/Stream.h: fi test "x$kpse_cv_have_win32" = xno || XPDF_LIBS="$XPDF_LIBS -lgdi32" -## _KPSE_LIB_FLAGS: Setup zziplib (-lzzip) flags +##tldbg _KPSE_LIB_FLAGS: Setup zziplib (-lzzip) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zziplib, libname=zzip, options=, tlincl=-IBLD/libs/zziplib/include, tllib=BLD/libs/zziplib/libzzip.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zziplib/include/zzip/zzip.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zziplib (zzip) . # Check whether --with-system-zziplib was given. if test "${with_system_zziplib+set}" = set; then : @@ -25341,7 +25376,9 @@ ${top_builddir}/../../libs/zziplib/include/zzip/zzip.h: cd ${top_builddir}/../../libs/zziplib && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup teckit (-lTECkit) flags +##tldbg _KPSE_LIB_FLAGS: Setup teckit (-lTECkit) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=teckit, libname=TECkit, options=, tlincl=-IBLD/libs/teckit/include, tllib=BLD/libs/teckit/libTECkit.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/teckit/include/teckit/TECkit_Common.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: teckit (TECkit) . # Check whether --with-system-teckit was given. if test "${with_system_teckit+set}" = set; then : @@ -25365,14 +25402,17 @@ ${top_builddir}/../../libs/teckit/include/teckit/TECkit_Common.h: cd ${top_builddir}/../../libs/teckit && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags +echo 'tldbg:KPSE_ICU_FLAGS called: more-icu-libs=, icu-config-args=.' >&5 +##tldbg _KPSE_LIB_FLAGS: Setup icu (-licuxxx) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=icu, libname=icuxxx, options=, tlincl=-DU_STATIC_IMPLEMENTATION -IBLD/libs/icu/include, tllib= BLD/libs/icu/icu-build/lib/libicuuc.a BLD/libs/icu/icu-build/lib/libicudata.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/icu/include/unicode/uversion.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: icu (icuxxx) . # Check whether --with-system-icu was given. if test "${with_system_icu+set}" = set; then : withval=$with_system_icu; fi if test "x$with_system_icu" = xyes; then - echo 'dbg:_KPSE_ICU_SYSTEM_FLAGS called.' >&5 + echo 'tldbg:KPSE_ICU_SYSTEM_FLAGS called.' >&5 if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}icu-config", so it can be a program name with args. set dummy ${ac_tool_prefix}icu-config; ac_word=$2 @@ -25574,8 +25614,16 @@ $(ICU_DEPEND): ${top_builddir}/../../libs/icu/include/unicode/uversion.h ${top_builddir}/../../libs/icu/include/unicode/uversion.h: cd ${top_builddir}/../../libs/icu && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi +# checking for openbsd to add -lpthread for icu. +case $build_os in +openbsd*) + eval ICUXXX_LIBS=\"$ICUXXX_LIBS -lpthread\" + ;; +esac -## _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags +##tldbg _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=graphite2, libname=graphite2, options=, tlincl=-IBLD/libs/graphite2/include -DGRAPHITE2_STATIC, tllib=BLD/libs/graphite2/libgraphite2.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/graphite2/include/graphite2/Font.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: graphite2 (graphite2) . # Check whether --with-system-graphite2 was given. if test "${with_system_graphite2+set}" = set; then : @@ -25599,7 +25647,9 @@ ${top_builddir}/../../libs/graphite2/include/graphite2/Font.h: cd ${top_builddir}/../../libs/graphite2 && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup harfbuzz (-lharfbuzz) flags +##tldbg _KPSE_LIB_FLAGS: Setup harfbuzz (-lharfbuzz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=harfbuzz, libname=harfbuzz, options=, tlincl=-IBLD/libs/harfbuzz/include, tllib=BLD/libs/harfbuzz/libharfbuzz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/harfbuzz/include/hb.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: harfbuzz (harfbuzz) . # Check whether --with-system-harfbuzz was given. if test "${with_system_harfbuzz+set}" = set; then : @@ -25623,7 +25673,9 @@ ${top_builddir}/../../libs/harfbuzz/include/hb.h: cd ${top_builddir}/../../libs/harfbuzz && $(MAKE) $(AM_MAKEFLAGS) rebuild' fi -## _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags +##tldbg _KPSE_LIB_FLAGS: Setup graphite2 (-lgraphite2) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=graphite2, libname=graphite2, options=, tlincl=-IBLD/libs/graphite2/include -DGRAPHITE2_STATIC, tllib=BLD/libs/graphite2/libgraphite2.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/graphite2/include/graphite2/Font.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: graphite2 (graphite2) . # Check whether --with-system-graphite2 was given. if test "${with_system_graphite2+set}" = set; then : diff --git a/Build/source/texk/web2c/web2c/configure b/Build/source/texk/web2c/web2c/configure index 94493ce53da..e977e3f50e2 100755 --- a/Build/source/texk/web2c/web2c/configure +++ b/Build/source/texk/web2c/web2c/configure @@ -8022,6 +8022,8 @@ fi done +##tldbg KPSE_COMMON: web2c convert (). +##tldbg KPSE_BASIC: Remember web2c convert () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/texk/xdvik/configure b/Build/source/texk/xdvik/configure index bc8531f8348..28a6f104597 100755 --- a/Build/source/texk/xdvik/configure +++ b/Build/source/texk/xdvik/configure @@ -8107,6 +8107,8 @@ fi done +##tldbg KPSE_COMMON: xdvik (). +##tldbg KPSE_BASIC: Remember xdvik () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -17325,11 +17327,11 @@ fi kpse_save_CPPFLAGS=$CPPFLAGS kpse_save_LIBS=$LIBS -## _KPSE_INIT: Initialize TL infrastructure +##tldbg _KPSE_INIT: Initialize TL infrastructure. kpse_BLD=`(cd "./../../." && pwd)` kpse_SRC=`(cd "$srcdir/../../." && pwd)` -## _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests +##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests. : ${CONFIG_LT=./config.lt} { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 $as_echo "$as_me: creating $CONFIG_LT" >&6;} @@ -18721,7 +18723,9 @@ else PKG_CONFIG="$ac_cv_prog_PKG_CONFIG" fi -## _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags +##tldbg _KPSE_LIB_FLAGS: Setup kpathsea (-lkpathsea) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=kpathsea, libname=kpathsea, options=lt, tlincl=-IBLD/texk -ISRC/texk, tllib=BLD/texk/kpathsea/libkpathsea.la, tlextra=, rebuildsrcdeps=${top_srcdir}/../kpathsea/*.[ch], rebuildblddeps=${top_builddir}/../kpathsea/paths.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: kpathsea (kpathsea) lt. # Check whether --with-system-kpathsea was given. if test "${with_system_kpathsea+set}" = set; then : @@ -18781,7 +18785,9 @@ if test "x$kpse_cv_kpse_debug" != xyes; then : KPATHSEA_INCLUDES="$KPATHSEA_INCLUDES -DNO_DEBUG" fi -## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags +##tldbg _KPSE_LIB_FLAGS: Setup zlib (-lz) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=zlib, libname=z, options=, tlincl=-IBLD/libs/zlib/include, tllib=BLD/libs/zlib/libz.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/zlib/include/zconf.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: zlib (z) . # Check whether --with-system-zlib was given. if test "${with_system_zlib+set}" = set; then : @@ -18798,7 +18804,8 @@ if test "${with_zlib_libdir+set}" = set; then : withval=$with_zlib_libdir; fi if test "x$with_system_zlib" = xyes; then - if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ##tldbg _KPSE_LIB_FLAGS_SYSTEM: zlib (z). +if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then ZLIB_INCLUDES="-I$with_zlib_includes" fi ZLIB_LIBS="-lz" @@ -18857,7 +18864,9 @@ $as_echo "#define z_const /**/" >>confdefs.h ;; esac -## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags +##tldbg _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags. +echo 'tldbg:_KPSE_LIB_FLAGS called: libdir=freetype2, libname=freetype, options=, tlincl=-IBLD/libs/freetype2/freetype2, tllib=BLD/libs/freetype2/libfreetype.a, tlextra=, rebuildsrcdeps=, rebuildblddeps=${top_builddir}/../../libs/freetype2/freetype2/ft2build.h.' >&5 +##tldbg _KPSE_LIB_FLAGS_TL: freetype2 (freetype) . # Check whether --with-system-freetype2 was given. if test "${with_system_freetype2+set}" = set; then : diff --git a/Build/source/texk/xdvik/squeeze/configure b/Build/source/texk/xdvik/squeeze/configure index bdb06df6a4d..9615b79f8c6 100755 --- a/Build/source/texk/xdvik/squeeze/configure +++ b/Build/source/texk/xdvik/squeeze/configure @@ -3394,6 +3394,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember xdvik squeeze () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/autosp/configure b/Build/source/utils/autosp/configure index 203f024af57..055ed5b35b5 100755 --- a/Build/source/utils/autosp/configure +++ b/Build/source/utils/autosp/configure @@ -3765,6 +3765,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember autosp () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/axodraw2/configure b/Build/source/utils/axodraw2/configure index 61e07a404fc..9044078afa8 100755 --- a/Build/source/utils/axodraw2/configure +++ b/Build/source/utils/axodraw2/configure @@ -3400,6 +3400,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember axodraw2 (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/configure b/Build/source/utils/configure index a3c38b374be..9fd2a828716 100755 --- a/Build/source/utils/configure +++ b/Build/source/utils/configure @@ -6063,6 +6063,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember utils () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output @@ -6419,7 +6420,7 @@ WARNING_CFLAGS=$kpse_cv_warning_cflags { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Utils programs to build" >&5 $as_echo_n "checking for Utils programs to build... " >&6; } -echo 'dbg:_KPSE_RECURSE called: list=utils, text=Utils programs, cond=test "x$enable_Kpse_pkg" = xyes, prefix=.' >&5 +echo 'tldbg:_KPSE_RECURSE called: list=utils, text=Utils programs, cond=test "x$enable_[]Kpse_pkg" = xyes, prefix=.' >&5 MAKE_SUBDIRS= CONF_SUBDIRS= if test -x $srcdir/autosp/configure; then diff --git a/Build/source/utils/devnag/configure b/Build/source/utils/devnag/configure index f9d6b6ea3ac..033b0447e61 100755 --- a/Build/source/utils/devnag/configure +++ b/Build/source/utils/devnag/configure @@ -3462,6 +3462,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember devnag () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/lacheck/configure b/Build/source/utils/lacheck/configure index eb7c6d3eb18..772ba1bb6fd 100755 --- a/Build/source/utils/lacheck/configure +++ b/Build/source/utils/lacheck/configure @@ -3399,6 +3399,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember lacheck () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/m-tx/configure b/Build/source/utils/m-tx/configure index 01a01ad73c3..3776e9ede97 100755 --- a/Build/source/utils/m-tx/configure +++ b/Build/source/utils/m-tx/configure @@ -3761,6 +3761,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember m-tx () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/pmx/configure b/Build/source/utils/pmx/configure index 6badcf3dbea..6b8c7797f74 100755 --- a/Build/source/utils/pmx/configure +++ b/Build/source/utils/pmx/configure @@ -3735,6 +3735,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember pmx () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/ps2eps/configure b/Build/source/utils/ps2eps/configure index cbabf993ed9..05bcae1bd25 100755 --- a/Build/source/utils/ps2eps/configure +++ b/Build/source/utils/ps2eps/configure @@ -3402,6 +3402,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember ps2eps () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/t1utils/configure b/Build/source/utils/t1utils/configure index d6b1aa14ae3..6da9f0d1456 100755 --- a/Build/source/utils/t1utils/configure +++ b/Build/source/utils/t1utils/configure @@ -3943,6 +3943,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember t1utils () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/texdoctk/configure b/Build/source/utils/texdoctk/configure index d8bcd1a1954..59c89098ada 100755 --- a/Build/source/utils/texdoctk/configure +++ b/Build/source/utils/texdoctk/configure @@ -3401,6 +3401,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember texdoctk () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/tpic2pdftex/configure b/Build/source/utils/tpic2pdftex/configure index 452b2f85c7a..2830c490482 100755 --- a/Build/source/utils/tpic2pdftex/configure +++ b/Build/source/utils/tpic2pdftex/configure @@ -3397,6 +3397,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember tpic2pdftex () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/vlna/configure b/Build/source/utils/vlna/configure index b884f68af6f..5bd49474dbd 100755 --- a/Build/source/utils/vlna/configure +++ b/Build/source/utils/vlna/configure @@ -3400,6 +3400,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember vlna (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/xindy/configure b/Build/source/utils/xindy/configure index 87afad205ce..6cf63b6c09b 100755 --- a/Build/source/utils/xindy/configure +++ b/Build/source/utils/xindy/configure @@ -3519,6 +3519,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember xindy (no-define) as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output diff --git a/Build/source/utils/xpdfopen/configure b/Build/source/utils/xpdfopen/configure index 1f6e2d81ddf..57b1fdbc8b3 100755 --- a/Build/source/utils/xpdfopen/configure +++ b/Build/source/utils/xpdfopen/configure @@ -3520,6 +3520,7 @@ else fi ;; esac +##tldbg KPSE_BASIC: Remember xpdfopen () as Kpse_Package (for future messages). if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output |