diff options
Diffstat (limited to 'Build/source/utils/t1utils')
34 files changed, 20446 insertions, 0 deletions
diff --git a/Build/source/utils/t1utils/INSTALL b/Build/source/utils/t1utils/INSTALL new file mode 100644 index 00000000000..95d84c820fb --- /dev/null +++ b/Build/source/utils/t1utils/INSTALL @@ -0,0 +1,176 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + diff --git a/Build/source/utils/t1utils/Makefile.am b/Build/source/utils/t1utils/Makefile.am new file mode 100644 index 00000000000..65ea0ec69da --- /dev/null +++ b/Build/source/utils/t1utils/Makefile.am @@ -0,0 +1,49 @@ +## Process this file with automake to produce Makefile.in +AUTOMAKE_OPTIONS = foreign check-news + +bin_PROGRAMS = t1ascii t1binary t1asm t1disasm t1unmac t1mac +man_MANS = t1ascii.1 t1binary.1 t1asm.1 t1disasm.1 t1unmac.1 t1mac.1 + +t1ascii_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1ascii.c +t1binary_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1binary.c +t1asm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1asm.c +t1disasm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1disasm.c +t1unmac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1unmac.c +t1mac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1mac.c + +AM_CPPFLAGS = -I$(top_srcdir)/include +LDADD = @LIBOBJS@ + +EXTRA_DIST = $(man_MANS) t1utils.spec + +srclinks: + cd $(top_srcdir); test -d include/lcdf || mkdir -p include/lcdf + cd $(top_srcdir); for i in clp.h inttypes.h; do \ + ln -sf ~/src/liblcdf/include/lcdf/$$i include/lcdf/$$i; done + cd $(top_srcdir); for i in clp.c strerror.c; do \ + ln -sf ~/src/liblcdf/liblcdf/$$i $$i; done + +versionize: + perl -pi -e "s/^\\.ds V.*/.ds V $(VERSION)/;" t1ascii.1 t1binary.1 t1disasm.1 t1asm.1 t1unmac.1 t1mac.1 + perl -pi -e 's/^Version:(\s*).*/Version:$${1}$(VERSION)/; s/$(PACKAGE)-[\w.]+\.tar\.gz/$(PACKAGE)-$(VERSION).tar.gz/;' t1utils.spec + perl -pi -e 's/VERSION [\d.ab]+$$/VERSION $(VERSION)/;' README + +rpm: dist + buildarch=`rpm --showrc | awk '/^build arch/ { print $$4; }'` ; \ + mkdir -p /tmp/rpm-t1u/SOURCES /tmp/rpm-t1u/RPMS/$$buildarch \ + /tmp/rpm-t1u/BUILD ; \ + echo 'include: /usr/lib/rpm/rpmrc' > /tmp/rpm-t1u/rc ; \ + echo 'macrofiles: /usr/lib/rpm/macros:/tmp/rpm-t1u/macros' >> /tmp/rpm-t1u/rc ; \ + echo '%_topdir /tmp/rpm-t1u' > /tmp/rpm-t1u/macros ; \ + cp $(PACKAGE)-$(VERSION).tar.gz /tmp/rpm-t1u/SOURCES ; \ + rpmbuild --rcfile /tmp/rpm-t1u/rc -bb t1utils.spec ; \ + cp /tmp/rpm-t1u/RPMS/$$buildarch/*.rpm . + rm -rf /tmp/rpm-t1u + +.PHONY: srclinks versionize rpm diff --git a/Build/source/utils/t1utils/Makefile.in b/Build/source/utils/t1utils/Makefile.in new file mode 100644 index 00000000000..c608369c23f --- /dev/null +++ b/Build/source/utils/t1utils/Makefile.in @@ -0,0 +1,693 @@ +# Makefile.in generated by automake 1.9.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +SOURCES = $(t1ascii_SOURCES) $(t1asm_SOURCES) $(t1binary_SOURCES) $(t1disasm_SOURCES) $(t1mac_SOURCES) $(t1unmac_SOURCES) + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = t1ascii$(EXEEXT) t1binary$(EXEEXT) t1asm$(EXEEXT) \ + t1disasm$(EXEEXT) t1unmac$(EXEEXT) t1mac$(EXEEXT) +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure INSTALL NEWS config.guess config.sub \ + depcomp install-sh missing mkinstalldirs strerror.c +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +PROGRAMS = $(bin_PROGRAMS) +am_t1ascii_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1ascii.$(OBJEXT) +t1ascii_OBJECTS = $(am_t1ascii_OBJECTS) +t1ascii_LDADD = $(LDADD) +t1ascii_DEPENDENCIES = @LIBOBJS@ +am_t1asm_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1asm.$(OBJEXT) +t1asm_OBJECTS = $(am_t1asm_OBJECTS) +t1asm_LDADD = $(LDADD) +t1asm_DEPENDENCIES = @LIBOBJS@ +am_t1binary_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1binary.$(OBJEXT) +t1binary_OBJECTS = $(am_t1binary_OBJECTS) +t1binary_LDADD = $(LDADD) +t1binary_DEPENDENCIES = @LIBOBJS@ +am_t1disasm_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1disasm.$(OBJEXT) +t1disasm_OBJECTS = $(am_t1disasm_OBJECTS) +t1disasm_LDADD = $(LDADD) +t1disasm_DEPENDENCIES = @LIBOBJS@ +am_t1mac_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1mac.$(OBJEXT) +t1mac_OBJECTS = $(am_t1mac_OBJECTS) +t1mac_LDADD = $(LDADD) +t1mac_DEPENDENCIES = @LIBOBJS@ +am_t1unmac_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1unmac.$(OBJEXT) +t1unmac_OBJECTS = $(am_t1unmac_OBJECTS) +t1unmac_LDADD = $(LDADD) +t1unmac_DEPENDENCIES = @LIBOBJS@ +DEFAULT_INCLUDES = -I. -I$(srcdir) -I. +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(t1ascii_SOURCES) $(t1asm_SOURCES) $(t1binary_SOURCES) \ + $(t1disasm_SOURCES) $(t1mac_SOURCES) $(t1unmac_SOURCES) +DIST_SOURCES = $(t1ascii_SOURCES) $(t1asm_SOURCES) $(t1binary_SOURCES) \ + $(t1disasm_SOURCES) $(t1mac_SOURCES) $(t1unmac_SOURCES) +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +AUTOMAKE_OPTIONS = foreign check-news +man_MANS = t1ascii.1 t1binary.1 t1asm.1 t1disasm.1 t1unmac.1 t1mac.1 +t1ascii_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1ascii.c + +t1binary_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1binary.c + +t1asm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1asm.c + +t1disasm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1disasm.c + +t1unmac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1unmac.c + +t1mac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ + clp.c t1lib.h t1lib.c t1mac.c + +AM_CPPFLAGS = -I$(top_srcdir)/include +LDADD = @LIBOBJS@ +EXTRA_DIST = $(man_MANS) t1utils.spec +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) +t1ascii$(EXEEXT): $(t1ascii_OBJECTS) $(t1ascii_DEPENDENCIES) + @rm -f t1ascii$(EXEEXT) + $(LINK) $(t1ascii_LDFLAGS) $(t1ascii_OBJECTS) $(t1ascii_LDADD) $(LIBS) +t1asm$(EXEEXT): $(t1asm_OBJECTS) $(t1asm_DEPENDENCIES) + @rm -f t1asm$(EXEEXT) + $(LINK) $(t1asm_LDFLAGS) $(t1asm_OBJECTS) $(t1asm_LDADD) $(LIBS) +t1binary$(EXEEXT): $(t1binary_OBJECTS) $(t1binary_DEPENDENCIES) + @rm -f t1binary$(EXEEXT) + $(LINK) $(t1binary_LDFLAGS) $(t1binary_OBJECTS) $(t1binary_LDADD) $(LIBS) +t1disasm$(EXEEXT): $(t1disasm_OBJECTS) $(t1disasm_DEPENDENCIES) + @rm -f t1disasm$(EXEEXT) + $(LINK) $(t1disasm_LDFLAGS) $(t1disasm_OBJECTS) $(t1disasm_LDADD) $(LIBS) +t1mac$(EXEEXT): $(t1mac_OBJECTS) $(t1mac_DEPENDENCIES) + @rm -f t1mac$(EXEEXT) + $(LINK) $(t1mac_LDFLAGS) $(t1mac_OBJECTS) $(t1mac_LDADD) $(LIBS) +t1unmac$(EXEEXT): $(t1unmac_OBJECTS) $(t1unmac_DEPENDENCIES) + @rm -f t1unmac$(EXEEXT) + $(LINK) $(t1unmac_LDFLAGS) $(t1unmac_OBJECTS) $(t1unmac_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strerror.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1ascii.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1asm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1binary.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1disasm.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1lib.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1mac.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1unmac.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +uninstall-info-am: +install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @case `sed 15q $(srcdir)/NEWS` in \ + *"$(VERSION)"*) : ;; \ + *) \ + echo "NEWS not updated; not releasing" 1>&2; \ + exit 1;; \ + esac + $(am__remove_distdir) + mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(DEPDIR) ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: install-man + +install-exec-am: install-binPROGRAMS + +install-info: install-info-am + +install-man: install-man1 + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf $(DEPDIR) ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man + +uninstall-man: uninstall-man1 + +.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ + clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \ + dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-compile distclean-generic distclean-hdr \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-man1 install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ + ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS \ + uninstall-info-am uninstall-man uninstall-man1 + + +srclinks: + cd $(top_srcdir); test -d include/lcdf || mkdir -p include/lcdf + cd $(top_srcdir); for i in clp.h inttypes.h; do \ + ln -sf ~/src/liblcdf/include/lcdf/$$i include/lcdf/$$i; done + cd $(top_srcdir); for i in clp.c strerror.c; do \ + ln -sf ~/src/liblcdf/liblcdf/$$i $$i; done + +versionize: + perl -pi -e "s/^\\.ds V.*/.ds V $(VERSION)/;" t1ascii.1 t1binary.1 t1disasm.1 t1asm.1 t1unmac.1 t1mac.1 + perl -pi -e 's/^Version:(\s*).*/Version:$${1}$(VERSION)/; s/$(PACKAGE)-[\w.]+\.tar\.gz/$(PACKAGE)-$(VERSION).tar.gz/;' t1utils.spec + perl -pi -e 's/VERSION [\d.ab]+$$/VERSION $(VERSION)/;' README + +rpm: dist + buildarch=`rpm --showrc | awk '/^build arch/ { print $$4; }'` ; \ + mkdir -p /tmp/rpm-t1u/SOURCES /tmp/rpm-t1u/RPMS/$$buildarch \ + /tmp/rpm-t1u/BUILD ; \ + echo 'include: /usr/lib/rpm/rpmrc' > /tmp/rpm-t1u/rc ; \ + echo 'macrofiles: /usr/lib/rpm/macros:/tmp/rpm-t1u/macros' >> /tmp/rpm-t1u/rc ; \ + echo '%_topdir /tmp/rpm-t1u' > /tmp/rpm-t1u/macros ; \ + cp $(PACKAGE)-$(VERSION).tar.gz /tmp/rpm-t1u/SOURCES ; \ + rpmbuild --rcfile /tmp/rpm-t1u/rc -bb t1utils.spec ; \ + cp /tmp/rpm-t1u/RPMS/$$buildarch/*.rpm . + rm -rf /tmp/rpm-t1u + +.PHONY: srclinks versionize rpm +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/utils/t1utils/NEWS b/Build/source/utils/t1utils/NEWS new file mode 100644 index 00000000000..970ca5b8668 --- /dev/null +++ b/Build/source/utils/t1utils/NEWS @@ -0,0 +1,285 @@ +T1utils NEWS + +Version 1.32 23.Feb.2004 + +* t1disasm: Avoid memory corruption bug (strings passed to eexec_line are + not null terminated). Reported by Werner Lemberg. + + +Version 1.31 8.Feb.2004 + +* All: Support fonts where the eexec-encrypted portion is binary, and the + first ciphertext byte is 0. Reported by Werner Lemberg. + + +Version 1.30 6.Jan.2004 + +* All: Support fonts, such as those in PostScript files printed by + acroread, where "currentfile eexec" is not followed by a newline. + + +Version 1.29 6.Oct.2003 + +* t1disasm: Support odd fonts where a character is defined on the + "/CharStrings" line. Reported by Werner Lemberg. + + +Version 1.28 7.Aug.2003 + +* Address build problems reported by Nelson H.F. Beebe. + + +Version 1.27 26.Mar.2003 + +* t1ascii: Add optional warning when output lines are longer than 255 + characters. Requested by Werner Lemberg <wl@gnu.org>. + + +Version 1.26 16.Apr.2002 + +* t1mac: Fix buglet (C++ comment, and temporary file left behind). Reported + by Vladimir Volovich <vvv@vsu.ru>. + + +Version 1.25 3.Jan.2002 + +* t1asm: Beware extra characters after `currentfile closefile'. Reported by + Luc Devroye <luc@cs.mcgill.ca>. + + +Version 1.24 6.Sep.2001 + +* Fixed compilation bugs on various platforms reported by Nelson H. F. + Beebe <beebe@math.utah.edu>. + + +Version 1.23 18.Jun.2001 + +* Fixed Macintosh file bugs: the MacBinary CRC was calculated incorrectly, + and extended finder flags were set to random values in BinHex output. + Reported, and patch provided, by Tom Kacvinsky <tjk@ams.org>. + + +Version 1.22 6.Mar.2001 + +* Fixed bug on processing PFA fonts with DOS line endings. The symptom was + t1binary producing strange/unusable fonts. Problem: the all-zeros line, + which signals the end of the font's binary section, was not being + recognized because of an extra '\r'. This has been a bug since version + 1.13 -- chagrin! Problem reported by Han The Thanh + <thanh@informatics.muni.cz>. + + +Version 1.21 9.Feb.2001 + +* t1ascii, t1asm, t1unmac: Raised minimum PFA line length to 8. The Adobe + spec may imply that there cannot be whitespace within the first 8 bytes + of an ASCII-encoded eexec section; it's somewhat ambiguous. Reported by + Rainer Menzner <Rainer.Menzner@neuroinformatik.ruhr-uni-bochum.de>. + + +Version 1.20 22.Jun.2000 + +* t1asm: Fixed bug where `t1asm -a' would give a `warning: line length + raised to 4' error message. Reported by Tom Kacvinsky <tjk@ams.org>. + + +Version 1.19 3.May.2000 + +* t1mac: Generated Macintosh fonts now use a custom-drawn icon set, rather + than Adobe's default. They also have a t1utils-specific creator signature + (T1UT), and their file information mentions t1utils. + +* t1mac: Added the `--filename' option. + + +Version 1.18 2.May.2000 + +* t1mac: Fixed bug where generated files appeared corrupted to Macintoshes. + Reported by Marten Thavenius <marten.thavenius@bahnhof.se>. + + +Version 1.17 27.Apr.2000 + +* Added new program, `t1mac', which translates PFA or PFB fonts into + Macintosh-style fonts. T1mac can output in MacBinary, AppleSingle, + AppleDouble, or BinHex format. Suggested by Marten Thavenius + <marten.thavenius@bahnhof.se>. + +* t1unmac: Added support for BinHex. + +* t1unmac: Fixed bugs in manual page and program options. + + +Version 1.16 25.Apr.2000 + +* t1unmac: Supports AppleSingle and AppleDouble files with the + `--applesingle/double' option. Requested by Kent Boortz + <kent@erix.ericsson.se>. + + +Version 1.15 4.Apr.2000 + +* t1ascii, t1binary, and t1disasm: Fixed bad error message. + +* t1unmac: Generates PFB fonts by default. + + +Version 1.14 25.Aug.1999 + +* t1asm: Version 1.13 produced complete crap output. My test cases were too + limited to catch this. Found by Rainer Menzner + <Rainer.Menzner@neuroinformatik.ruhr-uni-bochum.de>. + + +Version 1.13 2.Aug.1999 + +* t1disasm: Complete rewrite. It now uses t1lib.c functions; the goal is to + handle PFA and PFB fonts consistently. This has been extensively tested, + but there may be bugs. + +* t1disasm, t1asm: Fixed to support fonts with multiple Subrs and + CharStrings sections, like some old Oblique fonts. + +* PFA minimum line length raised to 4. + +* t1ascii, t1binary, t1disasm: Changes in t1lib.c to support reading binary + PFA fonts. Requested by Tom Kacvinsky <tjk@ams.org>. + + +Version 1.12 1.Aug.1999 + +* t1ascii, t1binary, t1asm, t1disasm: Support fonts with whitespace + following the "currentfile eexec" line. Embedded fonts in PostScript + generated by Acrobat Reader have this property. Reported by Tom Kacvinsky + <tjk@ams.org>. + +* t1ascii, t1asm, t1unmac: Use lowercase hex digits instead of uppercase. + +* t1unmac: Added `--line-length' option for PFA output. + + +Version 1.11 29.May.1999 + +* Bug fix in t1asm/t1disasm: if a `readhexstring' procedure was defined, we + got confused. Reported by Luc Devroye <luc@CS.McGill.CA>. + +* t1binary now has a maximum block length of 2^32 - 1. "Feature" requested + by Werner Lemberg <wl@gnu.org>. + +* t1ascii and t1binary each accept both PFA and PFB fonts. If you pass an + ASCII font (PFA) to t1ascii, it will output it mostly unchanged, and + similarly for PFB fonts and t1binary. The `-l' options will still take + effect, so you can use `t1ascii -l 60' to shorten the encrypted line + lengths of a PFA font. t1ascii also does some newline translation + (changes carriage returns to newlines). + + +Version 1.10.1 12.Apr.1999 + +* t1asm: Fixed bug when `-l' option wasn't provided. Caught by Giuseppe + Ghibò <ghibo@caesar.polito.it>. + + +Version 1.10 11.Apr.1999 + +* t1asm/t1disasm: Provide support for Type1C (Compact Font Format) font + files. These fonts have unencrypted character strings, signalled by a + negative lenIV value. Suggestion and patch thanks to Tom Kacvinsky + <tjk@ams.org>. + +* t1ascii/t1asm: Added `-l/--line-length' option to control maximum + encrypted line length. Suggestion thanks to Giuseppe Ghibò + <ghibo@caesar.polito.it>. + + +Version 1.9 14.Feb.1999 + +* t1asm/t1disasm: Be more robust on fonts that don't end in `mark + currentfile closefile'. John Vromans <JVromans@squirrel.nl> provided a + font that ended with `mark' on one line and `currentfile closefile' on + another; t1asm and t1disasm did not recognize the encrypted section of + the font had ended, and generated some garbage. + + +Version 1.8 2.Jan.1999 + +* Added some more Type 2 commands (flex, flex1, hflex, hflex1) from a + revision of the Type 2 spec. (I wouldn't have known about this except for + CurveSoft's revised t1utils package, available at + http://www.curvesoft.com. These t1utils are more up-to-date than theirs, + however.) + +* t1asm: Fixed one Type 2 command's translation (cntrmask was incorrectly + mapped to 18, not 20). + + +Version 1.7.2 11.Dec.1998 + +* Integrated patches from Jan-Jaap van der Heijden + <J.J.vanderHeijden@student.utwente.nl> to support building t1utils under + 32-bit Windows. + + +Version 1.7.1 5.Dec.1998 + +* The t1utils package now uses automake. + + +Version 1.7 27.Nov.1998 + +* t1asm: Should now work with fonts that have no /Subrs sections. Previously, + assembling such a font would silently fail; all the character definitions + would be mistaken for procedures and t1asm wouldn't translate them. Problem + noticed and fix suggested by Tom Kacvinsky <tjk@ams.org>. + +* t1disasm: Removed spurious debugging output and improved warning message + about unknown charstring commands. + +* Changed fgetc/fputc into getc/putc. + + +Version 1.6 27.Sep.1998 + +* `--help' now prints to stdout, following the GNU Coding Standards. + +* Makefiles: Added `make uninstall' target, enabled `./configure's + program name transformations, made VPATH builds possible. + + +Version 1.5.2 6.Aug.1998 + +* t1asm/t1disasm: Changed unknown charstring commands at the request of + Werner Lemberg and LEE Chun-Yu. An unknown escape in the charstring, like + 12 X, is translated to "escape_X" rather than "UNKNOWN_12_X". + + +Version 1.5.1 31.May.1998 + +* t1unmac did not actually understand the -r and -b options. Fixed. + +* t1unmac: Added better diagnostics to help you diagnose seeking problems. + + +Version 1.5 5.Mar.1998 + +* Initial release with Eddie Kohler as maintainer. + +* All: Updated to the GNU program behavior standards (long options, --help, + --version). Banners removed. Added more error messages. + +* t1binary: Removed fixed limit on line length. + +* t1binary: Supports Macintosh files, whose lines end in `\r'. + +* t1binary: Supports an odd number of hex digits in a line. + +* t1asm/t1disasm: Added support for Type 2 commands like `blend' and `add', + which also appear in some multiple master fonts like Adobe Jenson. + +* t1asm/t1disasm: Added support for unknown charstring commands. t1disasm + translates an unknown command #X to "UNKNOWN_X", and t1asm does the reverse. + +* t1asm/t1unmac: Changed default output to PFB. + +* t1unmac: Used to be called `unpost'. `t1unmac' is a much better name. diff --git a/Build/source/utils/t1utils/README b/Build/source/utils/t1utils/README new file mode 100644 index 00000000000..fa4f3184d51 --- /dev/null +++ b/Build/source/utils/t1utils/README @@ -0,0 +1,81 @@ +T1UTILS VERSION 1.30 NOTES +========================== + + You need an ANSI C compiler, such as gcc. + + Just type `./configure', then `make'. `make install' will build and +install the utilities and their manual pages. + + `./configure' accepts the usual options. See `INSTALL' for more +details. The most commonly used option is `--prefix', which can be used +to install the utilities in a place other than /usr/local. + + Changes since version 1.2 (c) 1998-2003 Eddie Kohler, under the same +redistribution copyright as I. Lee Hetherington's. See below for I. Lee +Hetherington's original README from 1992, updated slightly for today's +t1utils. + +Eddie Kohler +kohler@icir.org + +#################################################################### + +t1utils is a collection of simple type-1 font manipulation programs. +Together, they allow you to convert between PFA (ASCII) and PFB (binary) +formats, disassemble PFA or PFB files into human-readable form, reassemble +them into PFA or PFB format. Additionally you can extract font resources +from a Macintosh font file (ATM/Laserwriter), or create a Macintosh Type 1 +font file from a PFA or PFB font. + +There are currently six programs: + +t1ascii converts PFB files to PFA format. + +t1binary converts PFA files to PFB format. + +t1disasm disassembles a type-1 font (PFA or PFB format) into a + raw, human-readable text form for subsequent hand + editing, tweaking, hint fixing, etc... + +t1asm assembles type-1 font into PFA or PFB format from + human-readable form produced by t1disasm. + +t1unmac extracts POST resources from a Macintosh type-1 file + (ATM/Laserwriter) into PFA or PFB format for use outside + the Macintosh environment. The Macintosh file should be + stored in MacBinary, AppleSingle, AppleDouble, or BinHex + format, or as a raw resource fork. Note that t1unmac does + not have to run on a Macintosh, but makes Macintosh type-1 + fonts available to Unix machines and PCs. + +t1mac creates a Macintosh Type 1 file from a PFA or PFB-format + Type 1 font. Writes the Macintosh file in MacBinary, + AppleSingle, AppleDouble, or BinHex format, or as a raw + resource fork. WARNING: This will not suffice to use the + new font on a Macintosh, as Macintoshes cannot read raw + Type 1 fonts. You will need to create a font suitcase + containing bitmap fonts if you do not have such a suitcase + for the font already. T1utils cannot help you do this. + +... + +Thanks to Kai-Uwe Herbing (herbing@netmbx.netmbx.de) for the MS-DOS +port (Microsoft C/C++ compiler). + +The copyright on all of the tools in t1utils looks like: + + Copyright (c) 1992 by I. Lee Hetherington, all rights + reserved. + + Permission is hereby granted to use, modify, and distribute + this program for any purpose provided this copyright notice + and the one below remain intact. + +Note that these tools should not be used to illegally copy type-1 font +programs. Typeface design is an intricate art that should be +rewarded. + +I. Lee Hetherington +ilh@lcs.mit.edu + +#################################################################### diff --git a/Build/source/utils/t1utils/aclocal.m4 b/Build/source/utils/t1utils/aclocal.m4 new file mode 100644 index 00000000000..ef60f98401f --- /dev/null +++ b/Build/source/utils/t1utils/aclocal.m4 @@ -0,0 +1,1044 @@ +# generated automatically by aclocal 1.9.2 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# -*- Autoconf -*- +# Copyright (C) 2002, 2003 Free Software Foundation, Inc. +# Generated from amversion.in; do not edit by hand. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.2])]) + +# AM_AUX_DIR_EXPAND + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 6 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# serial 7 -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +#serial 2 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 7 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# This macro actually does too much some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 11 + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# -*- Autoconf -*- +# Copyright (C) 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 2 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# -*- Autoconf -*- + + +# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. + +# Copyright (C) 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 2 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# +# Check to make sure that the build environment is sane. +# + +# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# AM_PROG_INSTALL_STRIP + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/Build/source/utils/t1utils/clp.c b/Build/source/utils/t1utils/clp.c new file mode 100644 index 00000000000..8b84e826d6c --- /dev/null +++ b/Build/source/utils/t1utils/clp.c @@ -0,0 +1,1533 @@ +/* -*- related-file-name: "../include/lcdf/clp.h" -*- */ +/* clp.c - Complete source code for CLP. + * This file is part of CLP, the command line parser package. + * + * Copyright (c) 1997-2003 Eddie Kohler, kohler@icir.org + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, subject to the conditions + * listed in the Click LICENSE file, which is available in full at + * http://www.pdos.lcs.mit.edu/click/license.html. The conditions include: you + * must preserve this copyright notice, and you cannot mention the copyright + * holders in advertising related to the Software without their permission. + * The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This + * notice is a summary of the Click LICENSE file; the license in that file is + * legally binding. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#include <lcdf/clp.h> +#include <stdlib.h> +#include <string.h> +#include <stdio.h> +#include <assert.h> +#include <stdarg.h> +#include <ctype.h> + +/* By default, assume we have strtoul. */ +#if !defined(HAVE_STRTOUL) && !defined(HAVE_CONFIG_H) +# define HAVE_STRTOUL 1 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/* Option types for Clp_SetOptionChar */ +#define Clp_DoubledLong (Clp_LongImplicit * 2) + +#define Clp_AnyArgument (Clp_Mandatory | Clp_Optional) + +#define MAX_AMBIGUOUS_VALUES 4 + +typedef struct { + Clp_ArgParseFunc func; + int flags; + void *thunk; +} Clp_ArgType; + + +typedef struct { + int pos; + int neg; +} Clp_LongMinMatch; + + +struct Clp_Internal { + + Clp_Option *opt; + Clp_LongMinMatch *long_min_match; + int nopt; + + Clp_ArgType *argtype; + int nargtype; + + const char * const *argv; + int argc; + + unsigned char option_class[256]; + int both_short_and_long; + + char option_chars[3]; + const char *text; + + const char *program_name; + void (*error_handler)(const char *); + + int is_short; + int whole_negated; /* true if negated by an option character */ + int could_be_short; + + int option_processing; + + int ambiguous; + int ambiguous_values[MAX_AMBIGUOUS_VALUES]; + + Clp_Option *current_option; + int current_short; + int negated_by_no; + +}; + + +struct Clp_ParserState { + + const char * const *argv; + int argc; + char option_chars[3]; + const char *text; + int is_short; + int whole_negated; + +}; + + +typedef struct Clp_StringList { + + Clp_Option *items; + Clp_LongMinMatch *long_min_match; + int nitems; + + int allow_int; + int nitems_invalid_report; + +} Clp_StringList; + + +#define TEST(o, f) (((o)->flags & (f)) != 0) + + +static int calculate_long_min_match(int, Clp_Option *, int, int, int); + +static int parse_string(Clp_Parser *, const char *, int, void *); +static int parse_int(Clp_Parser *, const char *, int, void *); +static int parse_bool(Clp_Parser *, const char *, int, void *); +static int parse_double(Clp_Parser *, const char *, int, void *); +static int parse_string_list(Clp_Parser *, const char *, int, void *); + +static int ambiguity_error(Clp_Parser *, int, int *, Clp_Option *, + const char *, const char *, ...); + + +/******* + * Clp_NewParser, etc. + **/ + +static void +check_duplicated_short_options(Clp_Parser *clp, int nopt, Clp_Option *opt, int negated) +{ + int i; + int check[256]; + + for (i = 0; i < 256; i++) + check[i] = -1; + + for (i = 0; i < nopt; i++) + if (opt[i].short_name > 0 && opt[i].short_name < 256 + && (negated ? TEST(&opt[i], Clp_Negate) + : !TEST(&opt[i], Clp_OnlyNegated))) { + int sh = opt[i].short_name; + if (check[sh] >= 0 && check[sh] != opt[i].option_id) + Clp_OptionError(clp, "CLP internal error: more than 1 option has short name '%c'", sh); + check[sh] = opt[i].option_id; + } +} + +Clp_Parser * +Clp_NewParser(int argc, const char * const *argv, int nopt, Clp_Option *opt) + /* Creates and returns a new Clp_Parser using the options in 'opt', + or 0 on memory allocation failure */ +{ + int i; + Clp_Parser *clp = (Clp_Parser *)malloc(sizeof(Clp_Parser)); + Clp_Internal *cli = (Clp_Internal *)malloc(sizeof(Clp_Internal)); + Clp_LongMinMatch *lmm = (Clp_LongMinMatch *)malloc(sizeof(Clp_LongMinMatch) * nopt); + if (!clp || !cli || !lmm) + goto failed; + + clp->internal = cli; + cli->long_min_match = lmm; + + /* Assign arguments (need to do this now so we can call Clp_OptionError) */ + cli->argc = argc; + cli->argv = argv; + { + const char *slash = strrchr(argv[0], '/'); + cli->program_name = slash ? slash + 1 : argv[0]; + } + cli->error_handler = 0; + + /* Get rid of negative option_ids, which are internal to CLP */ + for (i = 0; i < nopt; i++) + if (opt[i].option_id < 0) { + Clp_OptionError(clp, "CLP internal error: option %d has negative option_id", i); + opt[i] = opt[nopt - 1]; + nopt--; + i--; + } + + /* Massage the options to make them usable */ + for (i = 0; i < nopt; i++) { + /* Enforce invariants */ + if (opt[i].arg_type <= 0) + opt[i].flags &= ~Clp_AnyArgument; + if (opt[i].arg_type > 0 && !TEST(&opt[i], Clp_Optional)) + opt[i].flags |= Clp_Mandatory; + + /* Nonexistent short options have character 256. We know this won't + equal any character in an argument, even if characters are signed */ + if (opt[i].short_name <= 0 || opt[i].short_name > 255) + opt[i].short_name = 256; + + /* Options that start with 'no-' should be changed to OnlyNegated */ + if (opt[i].long_name && strncmp(opt[i].long_name, "no-", 3) == 0) { + opt[i].long_name += 3; + opt[i].flags |= Clp_Negate | Clp_OnlyNegated; + } + } + + /* Check for duplicated short options */ + check_duplicated_short_options(clp, nopt, opt, 0); + check_duplicated_short_options(clp, nopt, opt, 1); + + /* Calculate long options' minimum unambiguous length */ + for (i = 0; i < nopt; i++) + if (opt[i].long_name && !TEST(&opt[i], Clp_OnlyNegated)) + lmm[i].pos = calculate_long_min_match + (nopt, opt, i, Clp_OnlyNegated, 0); + for (i = 0; i < nopt; i++) + if (opt[i].long_name && TEST(&opt[i], Clp_Negate)) + lmm[i].neg = calculate_long_min_match + (nopt, opt, i, Clp_Negate, Clp_Negate); + + /* Set up clp->internal */ + cli->opt = opt; + cli->nopt = nopt; + + cli->argtype = (Clp_ArgType *)malloc(sizeof(Clp_ArgType) * 5); + if (!cli->argtype) + goto failed; + cli->nargtype = 5; + + for (i = 0; i < 256; i++) + cli->option_class[i] = 0; + cli->option_class[(int) '-'] = Clp_Short; + cli->both_short_and_long = 0; + + cli->is_short = 0; + cli->whole_negated = 0; + + cli->option_processing = 1; + cli->current_option = 0; + + /* Add default type parsers */ + Clp_AddType(clp, Clp_ArgString, 0, parse_string, 0); + Clp_AddType(clp, Clp_ArgStringNotOption, Clp_DisallowOptions, parse_string, 0); + Clp_AddType(clp, Clp_ArgInt, 0, parse_int, 0); + Clp_AddType(clp, Clp_ArgUnsigned, 0, parse_int, (void *)cli); + Clp_AddType(clp, Clp_ArgBool, 0, parse_bool, 0); + Clp_AddType(clp, Clp_ArgDouble, 0, parse_double, 0); + return clp; + + failed: + if (cli && cli->argtype) + free(cli->argtype); + if (cli) + free(cli); + if (clp) + free(clp); + if (lmm) + free(lmm); + return 0; +} + +void +Clp_DeleteParser(Clp_Parser *clp) + /* Destroys the Clp_Parser 'clp' and any associated memory allocated by + CLP */ +{ + int i; + Clp_Internal *cli; + if (!clp) + return; + + cli = clp->internal; + + /* get rid of any string list types */ + for (i = 0; i < cli->nargtype; i++) + if (cli->argtype[i].func == parse_string_list) { + Clp_StringList *clsl = (Clp_StringList *)cli->argtype[i].thunk; + free(clsl->items); + free(clsl->long_min_match); + free(clsl); + } + + free(cli->argtype); + free(cli->long_min_match); + free(cli); + free(clp); +} + + +int +Clp_SetOptionProcessing(Clp_Parser *clp, int option_processing) + /* Sets whether command line arguments are parsed (looking for options) + at all. Each parser starts out with OptionProcessing true. Returns old + value. */ +{ + Clp_Internal *cli = clp->internal; + int old = cli->option_processing; + cli->option_processing = option_processing; + return old; +} + + +Clp_ErrorHandler +Clp_SetErrorHandler(Clp_Parser *clp, void (*error_handler)(const char *)) + /* Sets a hook function to be called before Clp_OptionError + prints anything. 0 means nothing will be called. */ +{ + Clp_Internal *cli = clp->internal; + Clp_ErrorHandler old = cli->error_handler; + cli->error_handler = error_handler; + return old; +} + + +int +Clp_SetOptionChar(Clp_Parser *clp, int c, int option_type) + /* Determines how clp will deal with short options. + option_type must be a sum of: + + 0 == Clp_NotOption 'c' isn't an option. + Clp_Short 'c' introduces a list of short options. + Clp_Long 'c' introduces a long option. + Clp_ShortNegated 'c' introduces a negated list of + short options. + Clp_LongNegated 'c' introduces a negated long option. + Clp_LongImplicit 'c' introduces a long option, and *is part + of the long option itself*. + + Some values are not allowed (Clp_Long | Clp_LongNegated isn't allowed, + for instance). c=0 means ALL characters are that type. Returns 0 on + failure (you gave an illegal option_type), 1 on success. */ +{ + int i; + Clp_Internal *cli = clp->internal; + + if (option_type < 0 + || option_type >= 2*Clp_LongImplicit + || ((option_type & Clp_Short) && (option_type & Clp_ShortNegated)) + || ((option_type & Clp_Long) && (option_type & Clp_LongNegated)) + || ((option_type & Clp_LongImplicit) && (option_type & (Clp_Short | Clp_ShortNegated | Clp_Long | Clp_LongNegated)))) + return 0; + + if (c == 0) + for (i = 1; i < 256; i++) + cli->option_class[i] = option_type; + else + cli->option_class[c] = option_type; + + /* If an option character can introduce either short or long options, then + we need to fix up the long_min_match values. We may have set the + long_min_match for option '--abcde' to 1, if no other option starts + with 'a'. But if '-' can introduce either a short option or a long + option, AND a short option '-a' exists, then the long_min_match for + '--abcde' must be set to 2! */ + if (!cli->both_short_and_long) { + int either_short = option_type & (Clp_Short | Clp_ShortNegated); + int either_long = option_type & (Clp_Long | Clp_LongNegated); + if (either_short && either_long) { + unsigned char have_short[257]; + for (i = 0; i < 256; i++) + have_short[i] = 0; + for (i = 0; i < cli->nopt; i++) + have_short[cli->opt[i].short_name] = 1; + for (i = 0; i < cli->nopt; i++) + if (cli->opt[i].long_name && cli->long_min_match[i].pos == 1) { + /* if '--Cxxxx's short name is '-C', keep long_min_match + == 1 */ + unsigned char first = (unsigned char)cli->opt[i].long_name[0]; + if (have_short[first] && first != cli->opt[i].short_name) + cli->long_min_match[i].pos++; + } + cli->both_short_and_long = 1; + } + } + + return 1; +} + + +/******* + * functions for Clp_Option lists + **/ + +static int +min_different_chars(const char *s, const char *t) + /* Returns the minimum number of characters required to distinguish + s from t. + If s is shorter than t, returns strlen(s). */ +{ + const char *sfirst = s; + while (*s && *t && *s == *t) + s++, t++; + if (!*s) + return s - sfirst; + else + return s - sfirst + 1; +} + +static int +calculate_long_min_match(int nopt, Clp_Option *opt, int which, + int flags, int flags_value) +{ + int j, lmm = 1; + int preferred = (opt[which].flags & Clp_PreferredMatch); + + for (j = 0; j < nopt; j++) + if (opt[j].long_name + && (opt[j].flags & flags) == flags_value + && opt[which].option_id != opt[j].option_id + && strncmp(opt[which].long_name, opt[j].long_name, lmm) == 0 + && (!preferred || strncmp(opt[which].long_name, opt[j].long_name, strlen(opt[which].long_name)) != 0)) + lmm = min_different_chars(opt[which].long_name, opt[j].long_name); + + return lmm; +} + +/* the ever-glorious argcmp */ + +static int +argcmp(const char *ref, const char *arg, int min_match, int fewer_dashes) + /* Returns 0 if ref and arg don't match. + Returns -1 if ref and arg match, but fewer than min_match characters. + Returns len if ref and arg match min_match or more characters; + len is the number of characters that matched in arg. + Allows arg to contain fewer dashes than ref iff fewer_dashes != 0. + + Examples: + argcmp("x", "y", 1, 0) --> 0 / just plain wrong + argcmp("a", "ax", 1, 0) --> 0 / ...even though min_match == 1 + and the 1st chars match + argcmp("box", "bo", 3, 0) --> -1 / ambiguous + argcmp("cat", "c=3", 1, 0) --> 1 / handles = arguments + */ +{ + const char *refstart = ref; + const char *argstart = arg; + assert(min_match > 0); + + compare: + while (*ref && *arg && *arg != '=' && *ref == *arg) + ref++, arg++; + + /* Allow arg to contain fewer dashes than ref */ + if (fewer_dashes && *ref == '-' && ref[1] && ref[1] == *arg) { + ref++; + goto compare; + } + + if (*arg && *arg != '=') + return 0; + else if (ref - refstart < min_match) + return -1; + else + return arg - argstart; +} + +static int +find_prefix_opt(const char *arg, int nopt, Clp_Option *opt, + Clp_LongMinMatch *lmmvec, + int *ambiguous, int *ambiguous_values, int negated) + /* Looks for an unambiguous match of 'arg' against one of the long + options in 'opt'. Returns positive if it finds one; otherwise, returns + -1 and possibly changes 'ambiguous' and 'ambiguous_values' to keep + track of at most MAX_AMBIGUOUS_VALUES possibilities. */ +{ + int i, fewer_dashes = 0, first_ambiguous = *ambiguous; + + retry: + for (i = 0; i < nopt; i++) { + int len, lmm; + if (!opt[i].long_name + || (negated && !TEST(&opt[i], Clp_Negate)) + || (!negated && TEST(&opt[i], Clp_OnlyNegated))) + continue; + + lmm = (negated ? lmmvec[i].neg : lmmvec[i].pos); + len = argcmp(opt[i].long_name, arg, lmm, fewer_dashes); + if (len > 0) + return i; + else if (len < 0) { + if (*ambiguous < MAX_AMBIGUOUS_VALUES) + ambiguous_values[*ambiguous] = i; + (*ambiguous)++; + } + } + + /* If there were no partial matches, try again with fewer_dashes true */ + if (*ambiguous == first_ambiguous && !fewer_dashes) { + fewer_dashes = 1; + goto retry; + } + + return -1; +} + + +/***** + * Argument parsing + **/ + +int +Clp_AddType(Clp_Parser *clp, int type_id, int flags, + Clp_ArgParseFunc func, void *thunk) + /* Add a argument parser for type_id to the Clp_Parser. When an argument + arg for Clp_Option opt is being processed, the parser routines will + call (*func)(clp, opt, arg, thunk, complain) + where complain is 1 if the routine should report errors, or 0 if it + should fail silently. + Returns 1 on success, 0 if memory allocation fails or the arguments + are bad. */ +{ + int i; + Clp_Internal *cli = clp->internal; + Clp_ArgType *new_argtype; + int nargtype = cli->nargtype; + assert(nargtype); + + if (type_id <= 0 || !func) + return 0; + + while (nargtype <= type_id) + nargtype *= 2; + new_argtype = (Clp_ArgType *) + realloc(cli->argtype, sizeof(Clp_ArgType) * nargtype); + if (!new_argtype) + return 0; + cli->argtype = new_argtype; + + for (i = cli->nargtype; i < nargtype; i++) + cli->argtype[i].func = 0; + cli->nargtype = nargtype; + + cli->argtype[type_id].func = func; + cli->argtype[type_id].flags = flags; + cli->argtype[type_id].thunk = thunk; + return 1; +} + + +/******* + * Default argument parsers + **/ + +static int +parse_string(Clp_Parser *clp, const char *arg, int complain, void *thunk) +{ + (void)complain, (void)thunk; + clp->val.s = arg; + return 1; +} + +static int +parse_int(Clp_Parser *clp, const char *arg, int complain, void *thunk) +{ + char *val; + int base = 10; + if (arg[0] == '0' && (arg[1] == 'x' || arg[1] == 'X')) { + base = 16; + arg += 2; + } + + if (thunk != 0) { /* unsigned */ +#if HAVE_STRTOUL + clp->val.u = strtoul(arg, &val, base); +#else + /* don't bother really trying to do it right */ + if (arg[0] == '-') + val = (char *) arg; + else + clp->val.u = strtol(arg, &val, base); +#endif + } else + clp->val.i = strtol(arg, &val, base); + if (*arg != 0 && *val == 0) + return 1; + else if (complain) { + const char *message = thunk != 0 + ? "'%O' expects a nonnegative integer, not '%s'" + : "'%O' expects an integer, not '%s'"; + if (base == 16) arg -= 2; + return Clp_OptionError(clp, message, arg); + } else + return 0; +} + +static int +parse_double(Clp_Parser *clp, const char *arg, int complain, void *thunk) +{ + char *val; + (void)thunk; + clp->val.d = strtod(arg, &val); + if (*arg != 0 && *val == 0) + return 1; + else if (complain) + return Clp_OptionError(clp, "'%O' expects a real number, not '%s'", arg); + else + return 0; +} + +static int +parse_bool(Clp_Parser *clp, const char *arg, int complain, void *thunk) +{ + int i; + char lcarg[6]; + (void)thunk; + if (strlen(arg) > 5 || strchr(arg, '=') != 0) + goto error; + + for (i = 0; arg[i] != 0; i++) + lcarg[i] = tolower(arg[i]); + lcarg[i] = 0; + + if (argcmp("yes", lcarg, 1, 0) > 0 + || argcmp("true", lcarg, 1, 0) > 0 + || argcmp("1", lcarg, 1, 0) > 0) { + clp->val.i = 1; + return 1; + } else if (argcmp("no", lcarg, 1, 0) > 0 + || argcmp("false", lcarg, 1, 0) > 0 + || argcmp("1", lcarg, 1, 0) > 0) { + clp->val.i = 0; + return 1; + } + + error: + if (complain) + Clp_OptionError(clp, "'%O' expects a true-or-false value, not '%s'", arg); + return 0; +} + + +/***** + * Clp_AddStringListType + **/ + +static int +parse_string_list(Clp_Parser *clp, const char *arg, int complain, void *thunk) +{ + Clp_StringList *sl = (Clp_StringList *)thunk; + int idx, ambiguous = 0; + int ambiguous_values[MAX_AMBIGUOUS_VALUES + 1]; + + /* actually look for a string value */ + idx = find_prefix_opt + (arg, sl->nitems, sl->items, sl->long_min_match, + &ambiguous, ambiguous_values, 0); + if (idx >= 0) { + clp->val.i = sl->items[idx].option_id; + return 1; + } + + if (sl->allow_int) { + if (parse_int(clp, arg, 0, 0)) + return 1; + } + + if (complain) { + const char *complaint = (ambiguous ? "an ambiguous" : "not a valid"); + if (!ambiguous) { + ambiguous = sl->nitems_invalid_report; + for (idx = 0; idx < ambiguous; idx++) + ambiguous_values[idx] = idx; + } + return ambiguity_error + (clp, ambiguous, ambiguous_values, sl->items, "", + "'%s' is %s argument to '%O'", arg, complaint); + } else + return 0; +} + + +int +finish_string_list(Clp_Parser *clp, int type_id, int flags, + Clp_Option *items, int nitems, int itemscap) +{ + int i; + Clp_StringList *clsl = (Clp_StringList *)malloc(sizeof(Clp_StringList)); + Clp_LongMinMatch *lmm = (Clp_LongMinMatch *)malloc(sizeof(Clp_LongMinMatch) * nitems); + if (!clsl || !lmm) + goto error; + + clsl->items = items; + clsl->long_min_match = lmm; + clsl->nitems = nitems; + clsl->allow_int = (flags & Clp_AllowNumbers) != 0; + + if (nitems < MAX_AMBIGUOUS_VALUES && nitems < itemscap && clsl->allow_int) { + items[nitems].long_name = "any integer"; + clsl->nitems_invalid_report = nitems + 1; + } else if (nitems > MAX_AMBIGUOUS_VALUES + 1) + clsl->nitems_invalid_report = MAX_AMBIGUOUS_VALUES + 1; + else + clsl->nitems_invalid_report = nitems; + + for (i = 0; i < nitems; i++) + lmm[i].pos = calculate_long_min_match(nitems, items, i, 0, 0); + + if (Clp_AddType(clp, type_id, 0, parse_string_list, clsl)) + return 1; + + error: + if (clsl) + free(clsl); + if (lmm) + free(lmm); + return 0; +} + +int +Clp_AddStringListType(Clp_Parser *clp, int type_id, int flags, ...) + /* An easy way to add new types to clp. + Call like this: + Clp_AddStringListType + (clp, type_id, flags, + char *s_1, int value_1, ..., char *s_n, int value_n, 0); + + Defines type_id as a type in clp. + This type accepts any of the strings s_1, ..., s_n + (or unambiguous abbreviations thereof); + if argument s_i is given, value_i is stored in clp->val.i. + If Clp_AllowNumbers is set in flags, + explicit integers are also allowed. + + Returns 1 on success, 0 on memory allocation errors. */ +{ + int nitems = 0; + int itemscap = 5; + Clp_Option *items = (Clp_Option *)malloc(sizeof(Clp_Option) * itemscap); + + va_list val; + va_start(val, flags); + + if (!items) + goto error; + + /* slurp up the arguments */ + while (1) { + int value; + char *name = va_arg(val, char *); + if (!name) + break; + value = va_arg(val, int); + + if (nitems >= itemscap) { + Clp_Option *new_items; + itemscap *= 2; + new_items = (Clp_Option *)realloc(items, sizeof(Clp_Option) * itemscap); + if (!new_items) + goto error; + items = new_items; + } + + items[nitems].long_name = name; + items[nitems].option_id = value; + items[nitems].flags = 0; + nitems++; + } + + va_end(val); + if (finish_string_list(clp, type_id, flags, items, nitems, itemscap)) + return 1; + + error: + va_end(val); + if (items) + free(items); + return 0; +} + + +int +Clp_AddStringListTypeVec(Clp_Parser *clp, int type_id, int flags, + int nitems, char **strings, int *values) + /* An alternate way to make a string list type. See Clp_AddStringListType + for the basics; this coalesces the strings and values into two arrays, + rather than spreading them out into a variable argument list. */ +{ + int i; + int itemscap = (nitems < 5 ? 5 : nitems); + Clp_Option *items = (Clp_Option *)malloc(sizeof(Clp_Option) * itemscap); + if (!items) + return 0; + + /* copy over items */ + for (i = 0; i < nitems; i++) { + items[i].long_name = strings[i]; + items[i].option_id = values[i]; + items[i].flags = 0; + } + + if (finish_string_list(clp, type_id, flags, items, nitems, itemscap)) + return 1; + else { + free(items); + return 0; + } +} + + +/******* + * Returning information + **/ + +const char * +Clp_ProgramName(Clp_Parser *clp) +{ + return clp->internal->program_name; +} + + +/****** + * Clp_ParserStates + **/ + +Clp_ParserState * +Clp_NewParserState(void) +{ + return (Clp_ParserState *)malloc(sizeof(Clp_ParserState)); +} + +void +Clp_DeleteParserState(Clp_ParserState *save) +{ + free(save); +} + + +void +Clp_SaveParser(Clp_Parser *clp, Clp_ParserState *save) + /* Saves parser position in save */ +{ + Clp_Internal *cli = clp->internal; + save->argv = cli->argv; + save->argc = cli->argc; + memcpy(save->option_chars, cli->option_chars, 3); + save->text = cli->text; + save->is_short = cli->is_short; + save->whole_negated = cli->whole_negated; +} + + +void +Clp_RestoreParser(Clp_Parser *clp, Clp_ParserState *save) + /* Restores parser position from save */ +{ + Clp_Internal *cli = clp->internal; + cli->argv = save->argv; + cli->argc = save->argc; + memcpy(cli->option_chars, save->option_chars, 3); + cli->text = save->text; + cli->is_short = save->is_short; + cli->whole_negated = save->whole_negated; +} + + +/******* + * Clp_Next and its helpers + **/ + +static void +set_option_text(Clp_Internal *cli, const char *text, int n_option_chars) +{ + char *option_chars = cli->option_chars; + assert(n_option_chars < 3); + + while (n_option_chars-- > 0) + *option_chars++ = *text++; + *option_chars = 0; + + cli->text = text; +} + + +static int +next_argument(Clp_Parser *clp, int want_argument) + /* Moves clp to the next argument. + Returns 1 if it finds another option. + Returns 0 if there aren't any more arguments. + Returns 0, sets clp->have_arg = 1, and sets clp->arg to the argument + if the next argument isn't an option. + If want_argument > 0, it'll look for an argument. + want_argument == 1: Accept arguments that start with Clp_NotOption + or Clp_LongImplicit. + want_argument == 2: Accept ALL arguments. + + Where is the option stored when this returns? + Well, cli->argv[0] holds the whole of the next command line argument. + cli->option_chars holds a string: what characters began the option? + It is generally "-" or "--". + cli->text holds the text of the option: + for short options, cli->text[0] is the relevant character; + for long options, cli->text holds the rest of the option. */ +{ + Clp_Internal *cli = clp->internal; + const char *text; + int option_class; + + /* clear relevant flags */ + clp->have_arg = 0; + clp->arg = 0; + cli->could_be_short = 0; + + /* if we're in a string of short options, move up one char in the string */ + if (cli->is_short) { + ++cli->text; + if (cli->text[0] == 0) + cli->is_short = 0; + else if (want_argument > 0) { + /* handle -O[=]argument case */ + clp->have_arg = 1; + if (cli->text[0] == '=') + clp->arg = cli->text + 1; + else + clp->arg = cli->text; + cli->is_short = 0; + return 0; + } + } + + /* if in short options, we're all set */ + if (cli->is_short) + return 1; + + /** if not in short options, move to the next argument **/ + cli->whole_negated = 0; + cli->text = 0; + + if (cli->argc <= 1) + return 0; + + cli->argc--; + cli->argv++; + text = cli->argv[0]; + + if (want_argument > 1) + goto not_option; + + option_class = cli->option_class[ (unsigned char)text[0] ]; + if (text[0] == '-' && text[1] == '-') + option_class = Clp_DoubledLong; + + /* If this character could introduce either a short or a long option, + try a long option first, but remember that short's a possibility for + later. */ + if ((option_class & (Clp_Short | Clp_ShortNegated)) + && (option_class & (Clp_Long | Clp_LongNegated))) { + option_class &= ~(Clp_Short | Clp_ShortNegated); + if (text[1] != 0) + cli->could_be_short = 1; + } + + switch (option_class) { + + case Clp_Short: + cli->is_short = 1; + goto check_singleton; + + case Clp_ShortNegated: + cli->is_short = 1; + cli->whole_negated = 1; + goto check_singleton; + + case Clp_Long: + goto check_singleton; + + case Clp_LongNegated: + cli->whole_negated = 1; + goto check_singleton; + + check_singleton: + /* For options introduced with one character, option-char, + '[option-char]' alone is NOT an option. */ + if (text[1] == 0) + goto not_option; + set_option_text(cli, text, 1); + break; + + case Clp_LongImplicit: + /* LongImplict: option_chars == "" (since all chars are part of the + option); restore head -> text of option */ + if (want_argument > 0) + goto not_option; + set_option_text(cli, text, 0); + break; + + case Clp_DoubledLong: + set_option_text(cli, text, 2); + break; + + not_option: + case Clp_NotOption: + cli->is_short = 0; + clp->have_arg = 1; + clp->arg = text; + return 0; + + default: + assert(0 /* CLP misconfiguration: bad option type */); + + } + + return 1; +} + + +static void +switch_to_short_argument(Clp_Parser *clp) +{ + Clp_Internal *cli = clp->internal; + const char *text = cli->argv[0]; + int option_class = cli->option_class[ (unsigned char)text[0] ]; + cli->is_short = 1; + cli->whole_negated = (option_class & Clp_ShortNegated ? 1 : 0); + set_option_text(cli, cli->argv[0], 1); + assert(cli->could_be_short); +} + + +static Clp_Option * +find_long(Clp_Parser *clp, const char *arg) + /* If arg corresponds to one of clp's options, finds that option & + returns it. If any argument is given after an = sign in arg, sets + clp->have_arg = 1 and clp->arg to that argument. Sets cli->ambiguous + to 1 iff there was no match because the argument was ambiguous. */ +{ + Clp_Internal *cli = clp->internal; + int value, len, min_match; + Clp_Option *opt = cli->opt; + int first_negative_ambiguous; + + /* Look for a normal option. */ + value = find_prefix_opt + (arg, cli->nopt, opt, cli->long_min_match, + &cli->ambiguous, cli->ambiguous_values, clp->negated); + if (value >= 0) + goto worked; + + /* If we can't find it, look for a negated option. */ + /* I know this is silly, but it makes me happy to accept + --no-no-option as a double negative synonym for --option. :) */ + first_negative_ambiguous = cli->ambiguous; + while (arg[0] == 'n' && arg[1] == 'o' && arg[2] == '-') { + arg += 3; + clp->negated = !clp->negated; + value = find_prefix_opt + (arg, cli->nopt, opt, cli->long_min_match, + &cli->ambiguous, cli->ambiguous_values, clp->negated); + if (value >= 0) + goto worked; + } + + /* No valid option was found; return 0. Mark the ambiguous values found + through '--no' by making them negative. */ + { + int i, max = cli->ambiguous; + if (max > MAX_AMBIGUOUS_VALUES) max = MAX_AMBIGUOUS_VALUES; + for (i = first_negative_ambiguous; i < max; i++) + cli->ambiguous_values[i] = -cli->ambiguous_values[i] - 1; + } + return 0; + + worked: + min_match = (clp->negated ? cli->long_min_match[value].neg : cli->long_min_match[value].pos); + len = argcmp(opt[value].long_name, arg, min_match, 1); /* XXX 1? */ + assert(len > 0); + if (arg[len] == '=') { + clp->have_arg = 1; + clp->arg = arg + len + 1; + } + return &opt[value]; +} + + +static Clp_Option * +find_short(Clp_Parser *clp, int short_name) + /* If short_name corresponds to one of clp's options, returns it. */ +{ + Clp_Internal *cli = clp->internal; + Clp_Option *opt = cli->opt; + int i; + + for (i = 0; i < cli->nopt; i++) + if (opt[i].short_name == short_name + && (clp->negated + ? TEST(&opt[i], Clp_Negate) + : !TEST(&opt[i], Clp_OnlyNegated))) + return &opt[i]; + + return 0; +} + + +int +Clp_Next(Clp_Parser *clp) + /* Gets and parses the next argument from the argument list. + + If there are no more arguments, returns Clp_Done. + If the next argument isn't an option, returns Clp_NotOption; + the argument is stored in clp->arg. + If the next argument is an option, returns that option's option_id. + + If the next argument is an unrecognizable or ambiguous option, + an error message is given and Clp_BadOption is returned. + + If an option has an argument, that argument is stored in clp->arg + and clp->have_arg is set to 1. + Furthermore, that argument's parsed value (according to its type) + is stored in the clp->val union. + + If an option needs an argument but isn't given one; + if it doesn't need an argument but IS given one; + or if the argument is the wrong type, + an error message is given and Clp_BadOption is returned. */ +{ + Clp_Internal *cli = clp->internal; + Clp_Option *opt; + Clp_ParserState clpsave; + int complain; + + /** Set up clp **/ + cli->current_option = 0; + cli->ambiguous = 0; + + /** Get the next argument or option **/ + if (!next_argument(clp, cli->option_processing ? 0 : 2)) + return clp->have_arg ? Clp_NotOption : Clp_Done; + + clp->negated = cli->whole_negated; + if (cli->is_short) + opt = find_short(clp, cli->text[0]); + else + opt = find_long(clp, cli->text); + + /** If there's ambiguity between long & short options, and we couldn't + find a long option, look for a short option **/ + if (!opt && cli->could_be_short) { + switch_to_short_argument(clp); + opt = find_short(clp, cli->text[0]); + } + + /** If we didn't find an option... **/ + if (!opt || (clp->negated && !TEST(opt, Clp_Negate))) { + + /* default processing for the "--" option: turn off option processing + and return the next argument */ + if (strcmp(cli->argv[0], "--") == 0) { + Clp_SetOptionProcessing(clp, 0); + return Clp_Next(clp); + } + + /* otherwise, report some error or other */ + if (cli->ambiguous) + ambiguity_error(clp, cli->ambiguous, cli->ambiguous_values, + cli->opt, cli->option_chars, + "option '%s%s' is ambiguous", + cli->option_chars, cli->text); + else if (cli->is_short && !cli->could_be_short) + Clp_OptionError(clp, "unrecognized option '%s%c'", + cli->option_chars, cli->text[0]); + else + Clp_OptionError(clp, "unrecognized option '%s%s'", + cli->option_chars, cli->text); + return Clp_BadOption; + } + + /** Set the current option **/ + cli->current_option = opt; + cli->current_short = cli->is_short; + cli->negated_by_no = clp->negated && !cli->whole_negated; + + /** The no-argument (or should-have-no-argument) case **/ + if (clp->negated || !TEST(opt, Clp_AnyArgument)) { + if (clp->have_arg) { + Clp_OptionError(clp, "'%O' can't take an argument"); + return Clp_BadOption; + } else + return opt->option_id; + } + + /** Get an argument if we need one, or if it's optional **/ + /* Sanity-check the argument type. */ + if (opt->arg_type <= 0 || opt->arg_type >= cli->nargtype + || cli->argtype[ opt->arg_type ].func == 0) + return Clp_Error; + + /* complain == 1 only if the argument was explicitly given, + or it is mandatory. */ + complain = (clp->have_arg != 0) || TEST(opt, Clp_Mandatory); + Clp_SaveParser(clp, &clpsave); + + if (TEST(opt, Clp_Mandatory) && !clp->have_arg) { + /* Mandatory argument case */ + /* Allow arguments to options to start with a dash, but only if the + argument type allows it by not setting Clp_DisallowOptions */ + int disallow = TEST(&cli->argtype[opt->arg_type], Clp_DisallowOptions); + next_argument(clp, disallow ? 1 : 2); + if (!clp->have_arg) { + int got_option = cli->text != 0; + Clp_RestoreParser(clp, &clpsave); + if (got_option) + Clp_OptionError(clp, "'%O' requires a non-option argument"); + else + Clp_OptionError(clp, "'%O' requires an argument"); + return Clp_BadOption; + } + + } else if (cli->is_short && !clp->have_arg && cli->text[1] != 0) + /* The -[option]argument case: + Assume that the rest of the current string is the argument. */ + next_argument(clp, 1); + + /** Parse the argument **/ + if (clp->have_arg) { + Clp_ArgType *atr = &cli->argtype[ opt->arg_type ]; + if (atr->func(clp, clp->arg, complain, atr->thunk) <= 0) { + /* parser failed */ + clp->have_arg = 0; + if (TEST(opt, Clp_Mandatory)) + return Clp_BadOption; + else + Clp_RestoreParser(clp, &clpsave); + } + } + + return opt->option_id; +} + + +const char * +Clp_Shift(Clp_Parser *clp, int allow_dashes) + /* Returns the next argument from the argument list without parsing it. + If there are no more arguments, returns 0. */ +{ + Clp_ParserState clpsave; + Clp_SaveParser(clp, &clpsave); + next_argument(clp, allow_dashes ? 2 : 1); + if (!clp->have_arg) + Clp_RestoreParser(clp, &clpsave); + return clp->arg; +} + + +/******* + * Clp_OptionError + **/ + +typedef struct Clp_BuildString { + char *text; + char *pos; + int capacity; + int bad; +} Clp_BuildString; + +static Clp_BuildString * +new_build_string(void) +{ + Clp_BuildString *bs = (Clp_BuildString *)malloc(sizeof(Clp_BuildString)); + if (!bs) goto bad; + bs->text = (char *)malloc(256); + if (!bs->text) goto bad; + bs->pos = bs->text; + bs->capacity = 256; + bs->bad = 0; + return bs; + + bad: + if (bs) free(bs); + return 0; +} + +static void +free_build_string(Clp_BuildString *bs) +{ + if (bs) free(bs->text); + free(bs); +} + +static int +grow_build_string(Clp_BuildString *bs, int want) +{ + char *new_text; + int ipos = bs->pos - bs->text; + int new_capacity = bs->capacity; + while (want >= new_capacity) + new_capacity *= 2; + new_text = (char *)realloc(bs->text, new_capacity); + if (!new_text) { + bs->bad = 1; + return 0; + } else { + bs->text = new_text; + bs->pos = bs->text + ipos; + bs->capacity = new_capacity; + return 1; + } +} + +#define ENSURE_BUILD_STRING(bs, space) \ + ((((bs)->pos - (bs)->text) + (space) >= (bs)->capacity) \ + || grow_build_string((bs), ((bs)->pos - (bs)->text) + (space))) + +static void +append_build_string(Clp_BuildString *bs, const char *s, int l) +{ + if (l < 0) + l = strlen(s); + if (ENSURE_BUILD_STRING(bs, l)) { + memcpy(bs->pos, s, l); + bs->pos += l; + } +} + + +static Clp_BuildString * +Clp_VaOptionError(Clp_Parser *clp, Clp_BuildString *bs, + const char *fmt, va_list val) + /* Reports an error for parser clp. Allowable % format characters are: + + s Print a string from the argument list. + c Print an int from the argument list as a character. + d Print an int from the argument list. + O Print the name of the current option; + take nothing from the argument list. + + No field specifications or flags are allowed. Always returns 0. */ +{ + Clp_Internal *cli = clp->internal; + const char *percent; + + if (!bs) + bs = new_build_string(); + if (!bs) + return 0; + append_build_string(bs, cli->program_name, -1); + append_build_string(bs, ": ", 2); + + for (percent = strchr(fmt, '%'); percent; percent = strchr(fmt, '%')) { + append_build_string(bs, fmt, percent - fmt); + switch (*++percent) { + + case 's': { + char *s = va_arg(val, char *); + if (s) append_build_string(bs, s, -1); + else append_build_string(bs, "(null)", 6); + break; + } + + case 'c': { + int c = va_arg(val, int); + if (ENSURE_BUILD_STRING(bs, 4)) { + if (c >= 32 && c <= 126) + *bs->pos++ = c; + else if (c < 32) { + *bs->pos++ = '^'; + *bs->pos++ = c + 64; + } else { + sprintf(bs->pos, "\\%03o", c); + bs->pos += 4; + } + } + break; + } + + case 'd': { + int d = va_arg(val, int); + if (ENSURE_BUILD_STRING(bs, 32)) { + sprintf(bs->pos, "%d", d); + bs->pos = strchr(bs->pos, 0); + } + break; + } + + case 'O': { + Clp_Option *opt = cli->current_option; + if (!opt) + append_build_string(bs, "(no current option!)", -1); + else if (cli->current_short) { + append_build_string(bs, cli->option_chars, -1); + if (ENSURE_BUILD_STRING(bs, 1)) + *bs->pos++ = opt->short_name; + } else if (cli->negated_by_no) { + append_build_string(bs, cli->option_chars, -1); + append_build_string(bs, "no-", 3); + append_build_string(bs, opt->long_name, -1); + } else { + append_build_string(bs, cli->option_chars, -1); + append_build_string(bs, opt->long_name, -1); + } + break; + } + + case '%': + if (ENSURE_BUILD_STRING(bs, 1)) + *bs->pos++ = '%'; + break; + + default: + if (ENSURE_BUILD_STRING(bs, 2)) { + *bs->pos++ = '%'; + *bs->pos++ = *percent; + } + break; + + } + fmt = ++percent; + } + + append_build_string(bs, fmt, -1); + append_build_string(bs, "\n", 1); + + return bs; +} + +static void +do_error(Clp_Parser *clp, Clp_BuildString *bs) +{ + const char *text; + if (bs && !bs->bad) { + *bs->pos = 0; + text = bs->text; + } else + text = "out of memory\n"; + + if (clp->internal->error_handler != 0) + (*clp->internal->error_handler)(text); + else + fputs(text, stderr); +} + +int +Clp_OptionError(Clp_Parser *clp, const char *fmt, ...) +{ + Clp_BuildString *bs; + va_list val; + va_start(val, fmt); + bs = Clp_VaOptionError(clp, 0, fmt, val); + va_end(val); + do_error(clp, bs); + free_build_string(bs); + return 0; +} + +static int +ambiguity_error(Clp_Parser *clp, int ambiguous, int *ambiguous_values, + Clp_Option *opt, const char *prefix, + const char *fmt, ...) +{ + Clp_BuildString *bs; + int i; + va_list val; + va_start(val, fmt); + bs = Clp_VaOptionError(clp, 0, fmt, val); + if (!bs) goto done; + + append_build_string(bs, clp->internal->program_name, -1); + append_build_string(bs, ": (Possibilities are", -1); + + for (i = 0; i < ambiguous && i < MAX_AMBIGUOUS_VALUES; i++) { + int value = ambiguous_values[i]; + const char *no_dash = ""; + if (value < 0) + value = -(value + 1), no_dash = "no-"; + if (i == 0) + append_build_string(bs, " ", 1); + else if (i == ambiguous - 1) + append_build_string(bs, (i == 1 ? " and " : ", and "), -1); + else + append_build_string(bs, ", ", 2); + append_build_string(bs, prefix, -1); + append_build_string(bs, no_dash, -1); + append_build_string(bs, opt[value].long_name, -1); + } + + if (ambiguous > MAX_AMBIGUOUS_VALUES) + append_build_string(bs, ", and others", -1); + append_build_string(bs, ".)\n", -1); + va_end(val); + + done: + do_error(clp, bs); + free_build_string(bs); + return 0; +} + +static int +copy_string(char *buf, int buflen, int bufpos, const char *what) +{ + int l = strlen(what); + if (l > buflen - bufpos - 1) + l = buflen - bufpos - 1; + memcpy(buf + bufpos, what, l); + return l; +} + +int +Clp_CurOptionNameBuf(Clp_Parser *clp, char *buf, int buflen) +{ + Clp_Internal *cli = clp->internal; + Clp_Option *opt = cli->current_option; + int pos = 0; + if (!opt) + pos += copy_string(buf, buflen, pos, "(no current option!)"); + else if (cli->current_short) { + pos += copy_string(buf, buflen, pos, cli->option_chars); + if (pos < buflen - 1) + buf[pos++] = opt->short_name; + } else if (cli->negated_by_no) { + pos += copy_string(buf, buflen, pos, cli->option_chars); + pos += copy_string(buf, buflen, pos, "no-"); + pos += copy_string(buf, buflen, pos, opt->long_name); + } else { + pos += copy_string(buf, buflen, pos, cli->option_chars); + pos += copy_string(buf, buflen, pos, opt->long_name); + } + buf[pos] = 0; + return pos; +} + +const char * +Clp_CurOptionName(Clp_Parser *clp) +{ + static char buf[256]; + Clp_CurOptionNameBuf(clp, buf, 256); + return buf; +} + +#ifdef __cplusplus +} +#endif diff --git a/Build/source/utils/t1utils/config.guess b/Build/source/utils/t1utils/config.guess new file mode 100755 index 00000000000..d0d57f6945f --- /dev/null +++ b/Build/source/utils/t1utils/config.guess @@ -0,0 +1,1465 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-09-19' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner <per@bothner.com>. +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes@openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches@gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/Build/source/utils/t1utils/config.h.in b/Build/source/utils/t1utils/config.h.in new file mode 100644 index 00000000000..7a04a625314 --- /dev/null +++ b/Build/source/utils/t1utils/config.h.in @@ -0,0 +1,98 @@ +/* config.h.in. Generated from configure.in by autoheader. */ + +#ifndef T1UTILS_CONFIG_H +#define T1UTILS_CONFIG_H + +/* Define if intXX_t types are not available. */ +#undef HAVE_FAKE_INT_TYPES + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strerror' function. */ +#undef HAVE_STRERROR + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if the system has the type `uintptr_t'. */ +#undef HAVE_UINTPTR_T + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have u_intXX_t types but not uintXX_t types. */ +#undef HAVE_U_INT_TYPES + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of a `unsigned int', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_INT + +/* The size of a `unsigned long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG + +/* The size of a `void *', as computed by sizeof. */ +#undef SIZEOF_VOID_P + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +#include <lcdf/inttypes.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* Prototype strerror if we don't have it. */ +#if !HAVE_STRERROR +char *strerror(int errno); +#endif + +#ifdef __cplusplus +} +/* Get rid of a possible inline macro under C++. */ +# define inline inline +#endif + +#endif /* T1UTILS_CONFIG_H */ diff --git a/Build/source/utils/t1utils/config.sub b/Build/source/utils/t1utils/config.sub new file mode 100755 index 00000000000..1c366dfde9a --- /dev/null +++ b/Build/source/utils/t1utils/config.sub @@ -0,0 +1,1579 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-07-08' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | ms1 \ + | msp430 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m32c) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | ms1-* \ + | msp430-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + m32c-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/Build/source/utils/t1utils/configure b/Build/source/utils/t1utils/configure new file mode 100755 index 00000000000..bcbcc1e33ff --- /dev/null +++ b/Build/source/utils/t1utils/configure @@ -0,0 +1,6751 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="t1ascii.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#if HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#if STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# if HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#if HAVE_STRINGS_H +# include <strings.h> +#endif +#if HAVE_INTTYPES_H +# include <inttypes.h> +#else +# if HAVE_STDINT_H +# include <stdint.h> +# endif +#endif +#if HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LIBOBJS CPP EGREP build build_cpu build_vendor build_os host host_cpu host_vendor host_os LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-warnings compile with -Wall + --enable-multiplatform put executables in bin/PLATFORM + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have + headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + +am__api_version="1.9" +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +test "$program_prefix" != NONE && + program_transform_name="s,^,$program_prefix,;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$,$program_suffix,;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm conftest.sed + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$AWK" && break +done + +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE=t1utils + VERSION=1.32 + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"$am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STRIP=$ac_ct_STRIP +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + ac_config_headers="$ac_config_headers config.h" + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 + (eval $ac_compiler --version </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 + (eval $ac_compiler -v </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 + (eval $ac_compiler -V </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include <stdlib.h> +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + + ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6 +rm -f confinc confmf + +# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" + +fi; +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + + +if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + + +depcc="$CC" am_compiler_list= + +echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + +echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_const=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_const=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6 +if test $ac_cv_c_const = no; then + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF + +fi + + +# Check whether --enable-warnings or --disable-warnings was given. +if test "${enable_warnings+set}" = set; then + enableval="$enable_warnings" + if test "$enableval" = yes ; then + CFLAGS="$CFLAGS -W -Wall" +fi +fi; + + + + +for ac_func in strerror +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +else + case $LIBOBJS in + "$ac_func.$ac_objext" | \ + *" $ac_func.$ac_objext" | \ + "$ac_func.$ac_objext "* | \ + *" $ac_func.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;; +esac + +fi +done + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in inttypes.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + have_inttypes_h=yes +else + have_inttypes_h=no +fi + +done + + +for ac_header in sys/types.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + have_sys_types_h=yes +else + have_sys_types_h=no +fi + +done + + +if test $have_inttypes_h = no -a $have_sys_types_h = yes; then + echo "$as_me:$LINENO: checking for uintXX_t typedefs" >&5 +echo $ECHO_N "checking for uintXX_t typedefs... $ECHO_C" >&6 +if test "${ac_cv_uint_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "(^|[^a-zA-Z_0-9])uint32_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + ac_cv_uint_t=yes +else + ac_cv_uint_t=no +fi +rm -f conftest* + +fi +echo "$as_me:$LINENO: result: $ac_cv_uint_t" >&5 +echo "${ECHO_T}$ac_cv_uint_t" >&6 +fi +if test $have_inttypes_h = no -a $have_sys_types_h = yes -a "$ac_cv_uint_t" = no; then + echo "$as_me:$LINENO: checking for u_intXX_t typedefs" >&5 +echo $ECHO_N "checking for u_intXX_t typedefs... $ECHO_C" >&6 +if test "${ac_cv_u_int_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "(^|[^a-zA-Z_0-9])u_int32_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + ac_cv_u_int_t=yes +else + ac_cv_u_int_t=no +fi +rm -f conftest* + +fi +echo "$as_me:$LINENO: result: $ac_cv_u_int_t" >&5 +echo "${ECHO_T}$ac_cv_u_int_t" >&6 +fi +if test $have_inttypes_h = yes -o "$ac_cv_uint_t" = yes; then + : +elif test "$ac_cv_u_int_t" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_U_INT_TYPES 1 +_ACEOF + +else + { echo "$as_me:$LINENO: WARNING: +========================================= + +Neither uint32_t nor u_int32_t defined by <inttypes.h> or <sys/types.h>! +Assuming \"short\" has 16 bits and \"int\" has 32 bits. + +=========================================" >&5 +echo "$as_me: WARNING: +========================================= + +Neither uint32_t nor u_int32_t defined by <inttypes.h> or <sys/types.h>! +Assuming \"short\" has 16 bits and \"int\" has 32 bits. + +=========================================" >&2;} + +cat >>confdefs.h <<\_ACEOF +#define HAVE_FAKE_INT_TYPES 1 +_ACEOF + +fi + +echo "$as_me:$LINENO: checking for uintptr_t" >&5 +echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6 +if test "${ac_cv_type_uintptr_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if HAVE_INTTYPES_H +# include <inttypes.h> +#endif +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif + + +int +main () +{ +if ((uintptr_t *) 0) + return 0; +if (sizeof (uintptr_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uintptr_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uintptr_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5 +echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6 +if test $ac_cv_type_uintptr_t = yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_UINTPTR_T 1 +_ACEOF + + +fi + + +echo "$as_me:$LINENO: checking for void *" >&5 +echo $ECHO_N "checking for void *... $ECHO_C" >&6 +if test "${ac_cv_type_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((void * *) 0) + return 0; +if (sizeof (void *)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_void_p=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_void_p=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5 +echo "${ECHO_T}$ac_cv_type_void_p" >&6 + +echo "$as_me:$LINENO: checking size of void *" >&5 +echo $ECHO_N "checking size of void *... $ECHO_C" >&6 +if test "${ac_cv_sizeof_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_void_p" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_void_p=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (void *)); } +unsigned long ulongval () { return (long) (sizeof (void *)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (void *))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (void *)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (void *)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_void_p=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_void_p=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5 +echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_VOID_P $ac_cv_sizeof_void_p +_ACEOF + + +echo "$as_me:$LINENO: checking for unsigned long" >&5 +echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6 +if test "${ac_cv_type_unsigned_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((unsigned long *) 0) + return 0; +if (sizeof (unsigned long)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_unsigned_long=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_unsigned_long=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5 +echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6 + +echo "$as_me:$LINENO: checking size of unsigned long" >&5 +echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6 +if test "${ac_cv_sizeof_unsigned_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_unsigned_long" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_unsigned_long=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (unsigned long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (unsigned long)); } +unsigned long ulongval () { return (long) (sizeof (unsigned long)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (unsigned long))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (unsigned long)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (unsigned long)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_unsigned_long=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (unsigned long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_unsigned_long=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5 +echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long +_ACEOF + + +echo "$as_me:$LINENO: checking for unsigned int" >&5 +echo $ECHO_N "checking for unsigned int... $ECHO_C" >&6 +if test "${ac_cv_type_unsigned_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((unsigned int *) 0) + return 0; +if (sizeof (unsigned int)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_unsigned_int=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_unsigned_int=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_int" >&5 +echo "${ECHO_T}$ac_cv_type_unsigned_int" >&6 + +echo "$as_me:$LINENO: checking size of unsigned int" >&5 +echo $ECHO_N "checking size of unsigned int... $ECHO_C" >&6 +if test "${ac_cv_sizeof_unsigned_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_unsigned_int" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (unsigned int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_unsigned_int=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (unsigned int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (unsigned int)); } +unsigned long ulongval () { return (long) (sizeof (unsigned int)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (unsigned int))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (unsigned int)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (unsigned int)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_unsigned_int=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (unsigned int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_unsigned_int=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_int" >&5 +echo "${ECHO_T}$ac_cv_sizeof_unsigned_int" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int +_ACEOF + + + + + + + + + + + + + +# For teTeX and TeX Live. +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +# Check whether --enable-multiplatform or --disable-multiplatform was given. +if test "${enable_multiplatform+set}" = set; then + enableval="$enable_multiplatform" + +fi; +test "x$enable_multiplatform" = xyes \ + && test "x$bindir" = 'x${exec_prefix}/bin' \ + && bindir="$bindir/$host" + + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <bug-autoconf@gnu.org>." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS section. +# + +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CYGPATH_W@,$CYGPATH_W,;t t +s,@PACKAGE@,$PACKAGE,;t t +s,@VERSION@,$VERSION,;t t +s,@ACLOCAL@,$ACLOCAL,;t t +s,@AUTOCONF@,$AUTOCONF,;t t +s,@AUTOMAKE@,$AUTOMAKE,;t t +s,@AUTOHEADER@,$AUTOHEADER,;t t +s,@MAKEINFO@,$MAKEINFO,;t t +s,@install_sh@,$install_sh,;t t +s,@STRIP@,$STRIP,;t t +s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +s,@mkdir_p@,$mkdir_p,;t t +s,@AWK@,$AWK,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@am__leading_dot@,$am__leading_dot,;t t +s,@AMTAR@,$AMTAR,;t t +s,@am__tar@,$am__tar,;t t +s,@am__untar@,$am__untar,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@DEPDIR@,$DEPDIR,;t t +s,@am__include@,$am__include,;t t +s,@am__quote@,$am__quote,;t t +s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +s,@CCDEPMODE@,$CCDEPMODE,;t t +s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' +ac_uC=' ' +ac_uD=',;t' + +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + +_ACEOF + +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF + +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS + +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.undefs >/dev/null +do + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs +done +rm -f conftest.undefs + +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file + fi + else + cat $tmp/config.h + rm -f $tmp/config.h + fi +# Compute $ac_file's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'`/stamp-h$_am_stamp_count +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_COMMANDS section. +# +for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue + ac_dest=`echo "$ac_file" | sed 's,:.*,,'` + ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_dir=`(dirname "$ac_dest") 2>/dev/null || +$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`(dirname "$mf") 2>/dev/null || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`(dirname "$file") 2>/dev/null || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p $dirpart/$fdir + else + as_dir=$dirpart/$fdir + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + { (exit 1); exit 1; }; }; } + + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + esac +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff --git a/Build/source/utils/t1utils/configure.in b/Build/source/utils/t1utils/configure.in new file mode 100644 index 00000000000..9e9fee3907c --- /dev/null +++ b/Build/source/utils/t1utils/configure.in @@ -0,0 +1,110 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(t1ascii.c) +AM_INIT_AUTOMAKE(t1utils, 1.32) +AM_CONFIG_HEADER(config.h) + +AC_PROG_CC +AC_C_CONST + +AC_ARG_ENABLE(warnings, +[ --enable-warnings compile with -Wall], +if test "$enableval" = yes ; then + CFLAGS="$CFLAGS -W -Wall" +fi) + + +dnl +dnl strerror()? +dnl + +AC_REPLACE_FUNCS(strerror) + + +dnl +dnl integer types +dnl + +AC_CHECK_HEADERS(inttypes.h, have_inttypes_h=yes, have_inttypes_h=no) +AC_CHECK_HEADERS(sys/types.h, have_sys_types_h=yes, have_sys_types_h=no) + +if test $have_inttypes_h = no -a $have_sys_types_h = yes; then + AC_CACHE_CHECK([for uintXX_t typedefs], ac_cv_uint_t, + [AC_EGREP_HEADER(dnl +changequote(<<,>>)<<(^|[^a-zA-Z_0-9])uint32_t[^a-zA-Z_0-9]>>changequote([,]), + sys/types.h, ac_cv_uint_t=yes, ac_cv_uint_t=no)]) +fi +if test $have_inttypes_h = no -a $have_sys_types_h = yes -a "$ac_cv_uint_t" = no; then + AC_CACHE_CHECK([for u_intXX_t typedefs], ac_cv_u_int_t, + [AC_EGREP_HEADER(dnl +changequote(<<,>>)<<(^|[^a-zA-Z_0-9])u_int32_t[^a-zA-Z_0-9]>>changequote([,]), + sys/types.h, ac_cv_u_int_t=yes, ac_cv_u_int_t=no)]) +fi +if test $have_inttypes_h = yes -o "$ac_cv_uint_t" = yes; then + : +elif test "$ac_cv_u_int_t" = yes; then + AC_DEFINE(HAVE_U_INT_TYPES, 1, [Define if you have u_intXX_t types but not uintXX_t types.]) +else + AC_MSG_WARN([ +========================================= + +Neither uint32_t nor u_int32_t defined by <inttypes.h> or <sys/types.h>! +Assuming "short" has 16 bits and "int" has 32 bits. + +=========================================]) + AC_DEFINE(HAVE_FAKE_INT_TYPES, 1, [Define if intXX_t types are not available.]) +fi + +AC_CHECK_TYPES(uintptr_t, [], [], +[#if HAVE_INTTYPES_H +# include <inttypes.h> +#endif +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +]) + +AC_CHECK_SIZEOF(void *) +AC_CHECK_SIZEOF(unsigned long) +AC_CHECK_SIZEOF(unsigned int) + + +dnl +dnl verbatim portions of the header +dnl + +AH_TOP([#ifndef T1UTILS_CONFIG_H +#define T1UTILS_CONFIG_H]) + +AH_BOTTOM([#include <lcdf/inttypes.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* Prototype strerror if we don't have it. */ +#if !HAVE_STRERROR +char *strerror(int errno); +#endif + +#ifdef __cplusplus +} +/* Get rid of a possible inline macro under C++. */ +# define inline inline +#endif + +#endif /* T1UTILS_CONFIG_H */]) + + +dnl +dnl Output +dnl + +# For teTeX and TeX Live. +AC_CANONICAL_HOST +AC_ARG_ENABLE(multiplatform, + [ --enable-multiplatform put executables in bin/PLATFORM]) +test "x$enable_multiplatform" = xyes \ + && test "x$bindir" = 'x${exec_prefix}/bin' \ + && bindir="$bindir/$host" + +AC_OUTPUT(Makefile) diff --git a/Build/source/utils/t1utils/depcomp b/Build/source/utils/t1utils/depcomp new file mode 100644 index 00000000000..9e5522d045f --- /dev/null +++ b/Build/source/utils/t1utils/depcomp @@ -0,0 +1,520 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2003-11-08.23 + +# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake@gnu.org>. +EOF + exit 0 + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit 0 + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir.libs/$base.d" + "$@" -Wc,-MD + else + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + else + tmpdepfile="$tmpdepfile2" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/Build/source/utils/t1utils/include/lcdf/clp.h b/Build/source/utils/t1utils/include/lcdf/clp.h new file mode 100644 index 00000000000..89ba63861a6 --- /dev/null +++ b/Build/source/utils/t1utils/include/lcdf/clp.h @@ -0,0 +1,153 @@ +/* -*- related-file-name: "../../liblcdf/clp.c" -*- */ +#ifndef LCDF_CLP_H +#define LCDF_CLP_H +#ifdef __cplusplus +extern "C" { +#endif + +/* clp.h - Public interface to CLP. + * This file is part of CLP, the command line parser package. + * + * Copyright (c) 1997-2003 Eddie Kohler, kohler@icir.org + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, subject to the conditions + * listed in the Click LICENSE file, which is available in full at + * http://www.pdos.lcs.mit.edu/click/license.html. The conditions include: you + * must preserve this copyright notice, and you cannot mention the copyright + * holders in advertising related to the Software without their permission. + * The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This + * notice is a summary of the Click LICENSE file; the license in that file is + * legally binding. */ + + +/* Argument types */ +#define Clp_NoArg 0 +#define Clp_ArgString 1 +#define Clp_ArgStringNotOption 2 +#define Clp_ArgBool 3 +#define Clp_ArgInt 4 +#define Clp_ArgUnsigned 5 +#define Clp_ArgDouble 6 + +#define Clp_FirstUserType 10 + +/* Argument type flags */ +#define Clp_DisallowOptions (1<<0) /* Argument won't resemble an option */ + +/* Flags for individual Clp_Options */ +#define Clp_Mandatory (1<<0) /* Has mandatory argument */ +#define Clp_Optional (1<<1) /* Has optional argument */ +#define Clp_Negate (1<<2) /* Allow --no-OPT */ +#define Clp_OnlyNegated (1<<3) /* Allow --no-OPT, but not --OPT */ +#define Clp_PreferredMatch (1<<4) /* Prefer --OPT to --OPTwhatever when + matching option prefixes */ + +/* Option types for Clp_SetOptionChar */ +/* Clp_NotOption 0 */ +#define Clp_Short (1<<0) +#define Clp_Long (1<<1) +#define Clp_ShortNegated (1<<2) +#define Clp_LongNegated (1<<3) +#define Clp_LongImplicit (1<<4) + +/* Flags for Clp_AddStringListType */ +#define Clp_AllowNumbers (1<<0) + +/* Return values from Clp_Next */ +#define Clp_NotOption 0 +#define Clp_Done -1 +#define Clp_BadOption -2 +#define Clp_Error -3 + +/* Sizes of clp->val */ +#define Clp_ValSize 40 +#define Clp_ValIntSize 10 + + +typedef struct Clp_Option Clp_Option; +typedef struct Clp_Parser Clp_Parser; +typedef struct Clp_Internal Clp_Internal; +typedef struct Clp_ParserState Clp_ParserState; + +typedef int (*Clp_ArgParseFunc)(Clp_Parser *, const char *, int, void *); +typedef void (*Clp_ErrorHandler)(const char *); + + +struct Clp_Option { + + const char *long_name; + int short_name; + + int option_id; + + int arg_type; + int flags; + +}; + + +struct Clp_Parser { + + int negated; + + int have_arg; + const char *arg; + + union { + int i; + unsigned u; + double d; + const char *s; + void *pv; +#ifdef HAVE_INT64_TYPES + int64_t i64; + uint64_t u64; +#endif + char cs[Clp_ValSize]; + unsigned char ucs[Clp_ValSize]; + int is[Clp_ValIntSize]; + unsigned us[Clp_ValIntSize]; + } val; + + Clp_Internal *internal; + +}; + + +Clp_Parser * Clp_NewParser(int argc, const char * const *argv, + int nopt, Clp_Option *opt); +void Clp_DeleteParser(Clp_Parser *); + +Clp_ErrorHandler Clp_SetErrorHandler(Clp_Parser *, Clp_ErrorHandler); +int Clp_SetOptionChar(Clp_Parser *, int c, int option_type); + +int Clp_AddType + (Clp_Parser *, int type_id, int flags, + Clp_ArgParseFunc func, void *user_data); +int Clp_AddStringListType + (Clp_Parser *, int type_id, int flags, ...); +int Clp_AddStringListTypeVec + (Clp_Parser *, int type_id, int flags, + int n, char **str, int *val); + +const char * Clp_ProgramName(Clp_Parser *); + +int Clp_Next(Clp_Parser *); +const char * Clp_Shift(Clp_Parser *, int allow_dashes); +int Clp_SetOptionProcessing(Clp_Parser *, int option_processing); + +Clp_ParserState *Clp_NewParserState(void); +void Clp_DeleteParserState(Clp_ParserState *); +void Clp_SaveParser(Clp_Parser *, Clp_ParserState *); +void Clp_RestoreParser(Clp_Parser *, Clp_ParserState *); + +int Clp_OptionError(Clp_Parser *, const char *, ...); +int Clp_CurOptionNameBuf(Clp_Parser *, char *buf, int buflen); +const char * Clp_CurOptionName(Clp_Parser *); /* uses static memory */ + +#ifdef __cplusplus +} +#endif +#endif diff --git a/Build/source/utils/t1utils/include/lcdf/inttypes.h b/Build/source/utils/t1utils/include/lcdf/inttypes.h new file mode 100644 index 00000000000..b88e9e9faf0 --- /dev/null +++ b/Build/source/utils/t1utils/include/lcdf/inttypes.h @@ -0,0 +1,34 @@ +#ifndef LCDF_INTTYPES_H +#define LCDF_INTTYPES_H +/* Define known-width integer types. */ + +#ifdef HAVE_INTTYPES_H +# include <inttypes.h> +#elif defined(HAVE_SYS_TYPES_H) +# include <sys/types.h> +# ifdef HAVE_U_INT_TYPES +typedef u_int8_t uint8_t; +typedef u_int16_t uint16_t; +typedef u_int32_t uint32_t; +# endif +#endif + +#ifdef HAVE_FAKE_INT_TYPES +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +#endif + +#ifndef HAVE_UINTPTR_T +# if SIZEOF_VOID_P == SIZEOF_UNSIGNED_INT +typedef unsigned int uintptr_t; +# elif SIZEOF_VOID_P == SIZEOF_UNSIGNED_LONG +typedef unsigned long uintptr_t; +# endif +#endif + +/* Note: Windows compilers call these types '[un]signed __int8', etc. */ +#endif diff --git a/Build/source/utils/t1utils/install-sh b/Build/source/utils/t1utils/install-sh new file mode 100755 index 00000000000..f5061e7e269 --- /dev/null +++ b/Build/source/utils/t1utils/install-sh @@ -0,0 +1,295 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2003-09-24.23 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename= +transform_arg= +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= + +usage="Usage: $0 [OPTION]... SRCFILE DSTFILE + or: $0 -d DIR1 DIR2... + +In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. +In the second, create the directory path DIR. + +Options: +-b=TRANSFORMBASENAME +-c copy source (using $cpprog) instead of moving (using $mvprog). +-d create directories instead of installing files. +-g GROUP $chgrp installed files to GROUP. +-m MODE $chmod installed files to MODE. +-o USER $chown installed files to USER. +-s strip installed files (using $stripprog). +-t=TRANSFORM +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + -c) instcmd=$cpprog + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit 0;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + --version) echo "$0 $scriptversion"; exit 0;; + + *) if test -z "$src"; then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if test -z "$src"; then + echo "$0: no input file specified." >&2 + exit 1 +fi + +# Protect names starting with `-'. +case $src in + -*) src=./$src ;; +esac + +if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + instcmd=: + chmodcmd= + else + instcmd=$mkdirprog + fi +else + # Waiting for this to be detected by the "$instcmd $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + dst=$dst/`basename "$src"` + fi +fi + +# This sed command emulates the dirname command. +dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. + +# Skip lots of stat calls in the usual case. +if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + test -d "$pathcomp" || $mkdirprog "$pathcomp" + pathcomp=$pathcomp/ + done +fi + +if test -n "$dir_arg"; then + $doit $instcmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + +else + # If we're going to rename the final executable, determine the name now. + if test -z "$transformarg"; then + dstfile=`basename "$dst"` + else + dstfile=`basename "$dst" $transformbasename \ + | sed $transformarg`$transformbasename + fi + + # don't allow the sed command to completely eliminate the filename. + test -z "$dstfile" && dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Move or copy the file name to the temp name + $doit $instcmd "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $instcmd $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now remove or move aside any old file at destination location. We + # try this two ways since rm can't unlink itself on some systems and + # the destination file might be busy for other reasons. In this case, + # the final cleanup might fail but the new file should still install + # successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" +fi && + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/Build/source/utils/t1utils/missing b/Build/source/utils/t1utils/missing new file mode 100755 index 00000000000..e7ef83a1c25 --- /dev/null +++ b/Build/source/utils/t1utils/missing @@ -0,0 +1,360 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2003-09-02.23 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/Build/source/utils/t1utils/mkinstalldirs b/Build/source/utils/t1utils/mkinstalldirs new file mode 100755 index 00000000000..d2d5f21b611 --- /dev/null +++ b/Build/source/utils/t1utils/mkinstalldirs @@ -0,0 +1,111 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman <friedman@prep.ai.mit.edu> +# Created: 1993-05-16 +# Public domain + +errstatus=0 +dirmode="" + +usage="\ +Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +case $dirmode in + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; +esac + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# End: +# mkinstalldirs ends here diff --git a/Build/source/utils/t1utils/strerror.c b/Build/source/utils/t1utils/strerror.c new file mode 100644 index 00000000000..b47f24ed2f8 --- /dev/null +++ b/Build/source/utils/t1utils/strerror.c @@ -0,0 +1,25 @@ +/* Some operating systems don't have strerror. + This file provides a definition which David Mazieres <dm@lcs.mit.edu> + assures me works. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#ifdef __cplusplus +extern "C" { +#endif + +char * +strerror(int errno) +{ + extern int sys_nerr; + extern char *sys_errlist[]; + if (errno < 0 || errno >= sys_nerr) + return (char *)"bad error number"; + else + return sys_errlist[errno]; +} + +#ifdef __cplusplus +} +#endif diff --git a/Build/source/utils/t1utils/t1ascii.1 b/Build/source/utils/t1utils/t1ascii.1 new file mode 100644 index 00000000000..0ae4d3eed57 --- /dev/null +++ b/Build/source/utils/t1utils/t1ascii.1 @@ -0,0 +1,51 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1ASCII 1 "" "Version \*V" +.SH NAME +t1ascii \- convert PostScript Type 1 font from binary to ASCII +.SH SYNOPSIS +.B t1ascii +\%[\fB\-l\fR \fIlength\fR] +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.BR t1ascii +converts Adobe Type 1 font programs in PFB (binary) format to PFA +(hexadecimal) format. If the file +.I output +is not specified output goes to the standard output. +If the file +.I input +is not specified input comes from the standard input. +' +.SH OPTIONS +.TP 5 +.BI \-\-line\-length= "num\fR, " \-l " num" +Set the maximum length of encrypted lines in the output to +.I num. +(These are the lines consisting wholly of hexadecimal digits.) The default +is 64. +' +.TP 5 +.BR \-\-warnings ", " \-w +Warn when the input font contains lines longer than 255 characters. +Long lines don't strictly conform to Adobe's Document Structuring +Conventions, and may cause problems with older software. +' +.SH "SEE ALSO" +.LP +.M t1binary 1 , +.M t1unmac 1 , +.M t1mac 1 , +.M t1asm 1 , +.M t1disasm 1 +.LP +.I "Adobe Type 1 Font Format" +.SH AUTHORS +Lee Hetherington (ilh@lcs.mit.edu) +.br +Eddie Kohler (kohler@icir.org) +.PP +Ported to Microsoft C/C++ Compiler and MS-DOS operating system by +Kai-Uwe Herbing (herbing@netmbx.netmbx.de). diff --git a/Build/source/utils/t1utils/t1ascii.c b/Build/source/utils/t1utils/t1ascii.c new file mode 100644 index 00000000000..bc3995f9255 --- /dev/null +++ b/Build/source/utils/t1utils/t1ascii.c @@ -0,0 +1,306 @@ +/* t1ascii + * + * This program takes an Adobe Type-1 font program in binary (PFB) format and + * converts it to ASCII (PFA) format. + * + * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. + * + * I. Lee Hetherington (ilh@lcs.mit.edu) + * + * 1.5 and later versions contain changes by, and are maintained by, + * Eddie Kohler <kohler@icir.org>. + * + * New change log in `NEWS'. Old change log: + * + * Revision 1.2 92/06/23 10:58:43 ilh + * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) + * incoporated. + * + * Revision 1.1 92/05/22 11:47:24 ilh + * initial version + * + * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by + * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code + * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS + * ... #endif, where _MSDOS is an identifier, which is automatically + * defined, if you compile with the Microsoft C/C++ Compiler. + * + */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <limits.h> +#include <stdarg.h> +#include <errno.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#ifdef __cplusplus +extern "C" { +#endif + +static FILE *ofp; +static int line_length = 64; + + +/***** + * Command line + **/ + +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 +#define LINE_LEN_OPT 304 +#define WARNINGS_OPT 305 + +static Clp_Option options[] = { + { "help", 0, HELP_OPT, 0, 0 }, + { "line-length", 'l', LINE_LEN_OPT, Clp_ArgInt, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, + { "warnings", 'w', WARNINGS_OPT, 0, Clp_Negate } +}; +static const char *program_name; +static const char *ifp_filename = "<stdin>"; +static int line_length_warning = -1; + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); +} + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + +void +usage(void) +{ + printf("\ +`T1ascii' translates a PostScript Type 1 font from compact binary (PFB) to\n\ +ASCII (PFA) format. The result is written to the standard output unless an\n\ +OUTPUT file is given.\n\ +\n\ +Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +\n\ +Options:\n\ + -l, --line-length=NUM Set max encrypted line length (default 64).\n\ + -o, --output=FILE Write output to FILE.\n\ + -w, --warnings Warn on too-long lines.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + + +/***** + * PFA font_reader functions + **/ + +static int hexcol = 0; + +static void +pfa_output_ascii(char *data, int len) +{ + if (hexcol) { + putc('\n', ofp); + hexcol = 0; + } + if (line_length_warning == 0 && len > 256) { + line_length_warning = 1; + fprintf(stderr, "%s: warning: %s has lines longer than 255 characters\n%s: (This may cause problems with older printers.)\n", program_name, ifp_filename, program_name); + } + fputs(data, ofp); + if (len && data[len - 1] != '\n') { + int p = len - 2; + while (p > 0 && data[p] != '\n') + p--; + hexcol = (p ? len - p - 1 : hexcol + len); + } +} + +static void +pfa_output_binary(unsigned char *data, int len) +{ + static const char *hexchar = "0123456789abcdef"; + for (; len > 0; len--, data++) { + /* trim hexadecimal lines to line_length columns */ + if (hexcol >= line_length) { + putc('\n', ofp); + hexcol = 0; + } + putc(hexchar[(*data >> 4) & 0xf], ofp); + putc(hexchar[*data & 0xf], ofp); + hexcol += 2; + } +} + +static void +pfa_output_end() +{ +} + +#ifdef __cplusplus +} +#endif + + +/***** + * main() + **/ + +int +main(int argc, char *argv[]) +{ + struct font_reader fr; + int c; + FILE *ifp = 0; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + case LINE_LEN_OPT: + line_length = clp->val.i; + if (line_length < 8) { + line_length = 8; + error("warning: line length raised to %d", line_length); + } else if (line_length > 1024) { + line_length = 1024; + error("warning: line length lowered to %d", line_length); + } + break; + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp = fopen(clp->arg, "w"); + if (!ofp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case WARNINGS_OPT: + line_length_warning = (clp->negated ? -1 : 0); + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1ascii (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 1992-2003 I. Lee Hetherington, Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) { + ifp_filename = "<stdin>"; + ifp = stdin; + } else { + ifp_filename = clp->arg; + ifp = fopen(clp->arg, "rb"); + if (!ifp) + fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!ifp) + ifp = stdin; + if (!ofp) + ofp = stdout; + if (line_length > 255 && line_length_warning == 0) + fprintf(stderr, "%s: warning: selected --line-length is greater than 255\n", program_name); + +#if defined(_MSDOS) || defined(_WIN32) + /* As we are processing a PFB (binary) input */ + /* file, we must set its file mode to binary. */ + _setmode(_fileno(ifp), _O_BINARY); +#endif + + /* prepare font reader */ + fr.output_ascii = pfa_output_ascii; + fr.output_binary = pfa_output_binary; + fr.output_end = pfa_output_end; + + /* peek at first byte to see if it is the PFB marker 0x80 */ + c = getc(ifp); + ungetc(c, ifp); + + /* do the file */ + if (c == PFB_MARKER) + process_pfb(ifp, ifp_filename, &fr); + else if (c == '%') + process_pfa(ifp, ifp_filename, &fr); + else + fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); + + fclose(ifp); + fclose(ofp); + return 0; +} diff --git a/Build/source/utils/t1utils/t1asm.1 b/Build/source/utils/t1utils/t1asm.1 new file mode 100644 index 00000000000..59d4db5e790 --- /dev/null +++ b/Build/source/utils/t1utils/t1asm.1 @@ -0,0 +1,96 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1ASM 1 "" "Version \*V" +.SH NAME +t1asm \- assemble PostScript Type 1 font +.SH SYNOPSIS +.B t1asm +\%[\fB\-a\fR|\fB\-b\fR] +\%[\fB\-l\fR \fIlength\fR] +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.B t1asm +assembles Adobe Type 1 font programs into either PFA (hexadecimal) or PFB +(binary) formats from a human-readable form. If the file +.I output +is not specified output goes to the standard output. If the file +.I input +is not specified input comes from the standard input. + +.B t1asm +tokenizes the charstring data and performs eexec and charstring encryption +as specified in the ``black book,'' +.I "Adobe Type 1 Font Format." + +The input must have a line of the form +.RS +.nf +.ft B +/-|{string currentfile exch readstring pop}executeonly def +.ft R +.fi +.RE +which defines the command, in this case `\-|', that is to start charstring +data. It is an error not to define such a command. Another common name for +this command is `RD'. + +After the start of the +.B Subrs +array in the input, all open braces `{' not in a comment begin a +charstring. Such a charstring is terminated by the next non-comment close +brace `}'. Within such a charstring, only comments, integers, and valid +charstring commands are allowed. Valid charstring command names can be +found in +.I "Adobe Type 1 Font Format" +and other documents describing the newer Type 2 opcodes. The format within +a charstring is unimportant as long as integers and commands are separated +by at least a one whitespace (space, tab, newline) character. Note that +within charstrings, comments are discarded because they cannot be encoded. +.SH OPTIONS +.TP 5 +.BR \-\-pfa ", " \-a +Output in PFA (ASCII) format. +.TP 5 +.BR \-\-pfb ", " \-b +Output in PFB (binary) format. This is the default. +.TP +.BI \-\-block\-length= "num\fR, " \-l " num" +PFB only: Set the maximum output block length to +.I num. +The default length is as large as memory allows. +.TP +.BI \-\-line\-length= "num\fR, " \-l " num" +PFA only: Set the maximum length of encrypted lines in the output to +.I num. +(These are the lines consisting wholly of hexadecimal digits.) The default +is 64. +.SH EXAMPLES +.LP +.nf +% t1asm Utopia-Regular.raw > Utopia-Regular.pfb +% t1asm -a Utopia-Regular.raw > Utopia-Regular.pfa +.fi +.SH "SEE ALSO" +.LP +.M t1disasm 1 , +.M t1ascii 1 , +.M t1binary 1 , +.M t1unmac 1 , +.M t1mac 1 +.LP +.I "Adobe Type 1 Font Format" +is available free from Adobe as a PDF file. +http://partners.adobe.com/asn/developer/PDFS/TN/T1_SPEC.PDF +.LP +.I "The Type 2 Charstring Format," +also available from Adobe as a PDF file, describes the newer Type 2 +operators, which are also used in some multiple-master Type 1 fonts like +Adobe Jenson and Kepler. +http://partners.adobe.com/asn/developer/PDFS/TN/5177.Type2.pdf +' +.SH AUTHORS +Lee Hetherington (ilh@lcs.mit.edu) +.br +Eddie Kohler (kohler@icir.org) diff --git a/Build/source/utils/t1utils/t1asm.c b/Build/source/utils/t1utils/t1asm.c new file mode 100644 index 00000000000..ac4783c7530 --- /dev/null +++ b/Build/source/utils/t1utils/t1asm.c @@ -0,0 +1,812 @@ +/* t1asm -*- c-basic-offset: 2 -*- + * + * This program `assembles' Adobe Type-1 font programs in pseudo-PostScript + * form into either PFB or PFA format. The human readable/editable input is + * charstring- and eexec-encrypted as specified in the `Adobe Type 1 Font + * Format' version 1.1 (the `black book'). There is a companion program, + * t1disasm, which `disassembles' PFB and PFA files into a pseudo-PostScript + * file. + * + * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. + * + * I. Lee Hetherington (ilh@lcs.mit.edu) + * + * 1.5 and later versions contain changes by, and are maintained by, + * Eddie Kohler <kohler@icir.org>. + * + * New change log in `NEWS'. Old change log: + * + * Revision 1.4 92/07/10 10:53:09 ilh + * Added support for additional PostScript after the closefile command + * (ie., some fonts have {restore}if after the cleartomark). + * + * Revision 1.3 92/06/23 10:58:25 ilh + * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) + * incoporated. + * + * Revision 1.2 92/05/22 11:54:45 ilh + * Fixed bug where integers larger than 32000 could not be encoded in + * charstrings. Now integer range is correct for four-byte + * twos-complement integers: -(1<<31) <= i <= (1<<31)-1. Bug detected by + * Piet Tutelaers (rcpt@urc.tue.nl). + * + * Revision 1.1 92/05/22 11:48:46 ilh + * initial version + * + * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by + * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code + * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS + * ... #endif, where _MSDOS is an identifier, which is automatically + * defined, if you compile with the Microsoft C/C++ Compiler. + * + */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <limits.h> +#include <stdarg.h> +#include <errno.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#define LINESIZE 512 + +#ifdef __cplusplus +extern "C" { +#endif + +typedef unsigned char byte; + +static FILE *ifp; +static FILE *ofp; +static struct pfb_writer w; +static int blocklen = -1; + +/* flags */ +static int pfb = 1; +static int active = 0; +static int ever_active = 0; +static int start_charstring = 0; +static int in_eexec = 0; + +/* need to add 1 as space for \0 */ +static char line[LINESIZE + 1]; + +/* lenIV and charstring start command */ +static int lenIV = 4; +static char cs_start[10]; + +/* for charstring buffering */ +static byte charstring_buf[65535]; +static byte *charstring_bp; + +/* decryption stuff */ +static uint16_t er, cr; +static uint16_t c1 = 52845, c2 = 22719; + +/* table of charstring commands */ +static struct command { + const char *name; + int one, two; +} command_table[] = { + { "abs", 12, 9 }, /* Type 2 */ + { "add", 12, 10 }, /* Type 2 */ + { "and", 12, 3 }, /* Type 2 */ + { "blend", 16, -1 }, /* Type 2 */ + { "callgsubr", 29, -1 }, /* Type 2 */ + { "callothersubr", 12, 16 }, /* Type 1 ONLY */ + { "callsubr", 10, -1 }, + { "closepath", 9, -1 }, /* Type 1 ONLY */ + { "cntrmask", 20, -1 }, /* Type 2 */ + { "div", 12, 12 }, + { "dotsection", 12, 0 }, /* Type 1 ONLY */ + { "drop", 12, 18 }, /* Type 2 */ + { "dup", 12, 27 }, /* Type 2 */ + { "endchar", 14, -1 }, + { "eq", 12, 15 }, /* Type 2 */ + { "error", 0, -1 }, /* special */ + { "escape", 12, -1 }, /* special */ + { "exch", 12, 28 }, /* Type 2 */ + { "flex", 12, 35 }, /* Type 2 */ + { "flex1", 12, 37 }, /* Type 2 */ + { "get", 12, 21 }, /* Type 2 */ + { "hflex", 12, 34 }, /* Type 2 */ + { "hflex1", 12, 36 }, /* Type 2 */ + { "hhcurveto", 27, -1 }, /* Type 2 */ + { "hintmask", 19, -1 }, /* Type 2 */ + { "hlineto", 6, -1 }, + { "hmoveto", 22, -1 }, + { "hsbw", 13, -1 }, /* Type 1 ONLY */ + { "hstem", 1, -1 }, + { "hstem3", 12, 2 }, /* Type 1 ONLY */ + { "hstemhm", 18, -1 }, /* Type 2 */ + { "hvcurveto", 31, -1 }, + { "ifelse", 12, 22 }, /* Type 2 */ + { "index", 12, 29 }, /* Type 2 */ + { "load", 12, 13 }, /* Type 2 */ + { "mul", 12, 24 }, /* Type 2 */ + { "neg", 12, 14 }, /* Type 2 */ + { "not", 12, 5 }, /* Type 2 */ + { "or", 12, 4 }, /* Type 2 */ + { "pop", 12, 17 }, /* Type 1 ONLY */ + { "put", 12, 20 }, /* Type 2 */ + { "random", 12, 23 }, /* Type 2 */ + { "rcurveline", 24, -1 }, /* Type 2 */ + { "return", 11, -1 }, + { "rlinecurve", 25, -1 }, /* Type 2 */ + { "rlineto", 5, -1 }, + { "rmoveto", 21, -1 }, + { "roll", 12, 30 }, /* Type 2 */ + { "rrcurveto", 8, -1 }, + { "sbw", 12, 7 }, /* Type 1 ONLY */ + { "seac", 12, 6 }, /* Type 1 ONLY */ + { "setcurrentpoint", 12, 33 }, /* Type 1 ONLY */ + { "sqrt", 12, 26 }, /* Type 2 */ + { "store", 12, 8 }, /* Type 2 */ + { "sub", 12, 11 }, /* Type 2 */ + { "vhcurveto", 30, -1 }, + { "vlineto", 7, -1 }, + { "vmoveto", 4, -1 }, + { "vstem", 3, -1 }, + { "vstem3", 12, 1 }, /* Type 1 ONLY */ + { "vstemhm", 23, -1 }, /* Type 2 */ + { "vvcurveto", 26, -1 }, /* Type 2 */ +}; /* alphabetical */ + +/* Two separate encryption functions because eexec and charstring encryption + must proceed in parallel. */ + +static byte eencrypt(byte plain) +{ + byte cipher; + + cipher = (byte)(plain ^ (er >> 8)); + er = (uint16_t)((cipher + er) * c1 + c2); + return cipher; +} + +static byte cencrypt(byte plain) +{ + byte cipher; + + /* Thanks to Tom Kacvinsky <tjk@ams.org> who reported that lenIV == -1 means + unencrypted charstrings. */ + if (lenIV < 0) return plain; + + cipher = (byte)(plain ^ (cr >> 8)); + cr = (uint16_t)((cipher + cr) * c1 + c2); + return cipher; +} + +/* This function outputs a single byte. If output is in PFB format then output + is buffered through blockbuf[]. If output is in PFA format, then output + will be hexadecimal if in_eexec is set, ASCII otherwise. */ + +static void output_byte(byte b) +{ + static const char *hexchar = "0123456789abcdef"; + static int hexcol = 0; + + if (pfb) { + /* PFB */ + PFB_OUTPUT_BYTE(&w, b); + } else { + /* PFA */ + if (in_eexec) { + /* trim hexadecimal lines to `blocklen' columns */ + if (hexcol >= blocklen) { + putc('\n', ofp); + hexcol = 0; + } + putc(hexchar[(b >> 4) & 0xf], ofp); + putc(hexchar[b & 0xf], ofp); + hexcol += 2; + } else { + putc(b, ofp); + } + } +} + +/* This function outputs a byte through possible eexec encryption. */ + +static void eexec_byte(byte b) +{ + if (in_eexec) + output_byte(eencrypt(b)); + else + output_byte(b); +} + +/* This function outputs a null-terminated string through possible eexec + encryption. */ + +static void eexec_string(const char *string) +{ + while (*string) + eexec_byte(*string++); +} + +/* This function gets ready for the eexec-encrypted data. If output is in + PFB format then flush current ASCII block and get ready for binary block. + We start encryption with four random (zero) bytes. */ + +static void eexec_start(char *string) +{ + eexec_string("currentfile eexec\n"); + if (pfb && w.blocktyp != PFB_BINARY) { + pfb_writer_output_block(&w); + w.blocktyp = PFB_BINARY; + } + + in_eexec = 1; + er = 55665; + eexec_byte(0); + eexec_byte(0); + eexec_byte(0); + eexec_byte(0); + eexec_string(string); +} + +/* 25.Aug.1999 -- Return 1 if this line actually looks like the start of a + charstring. We use the heuristic that it should start with `/' (a name) or + `dup' (a subroutine). Previous heuristic caused killa bad output. */ + +static int check_line_charstring() +{ + char *p = line; + while (isspace(*p)) + p++; + return (*p == '/' || (p[0] == 'd' && p[1] == 'u' && p[2] == 'p')); +} + +/* This function returns an input line of characters. A line is terminated by + length (including terminating null) greater than LINESIZE, \r, \n, \r\n, or + when active (looking for charstrings) by '{'. When terminated by a newline + the newline is put into line[]. When terminated by '{', the '{' is not put + into line[], and the flag start_charstring is set to 1. */ + +static void getline() +{ + int c; + char *p = line; + int comment = 0; + start_charstring = 0; + + while (p < line + LINESIZE) { + c = getc(ifp); + + if (c == EOF) + break; + else if (c == '%') + comment = 1; + else if (active && !comment && c == '{') { + /* 25.Aug.1999 -- new check for whether we should stop be active */ + if (check_line_charstring()) { + start_charstring = 1; + break; + } else + active = 0; + } + + *p++ = (char) c; + + /* end of line processing: change CR or CRLF into LF, and exit */ + if (c == '\r') { + c = getc(ifp); + if (c != '\n') + ungetc(c, ifp); + p[-1] = '\n'; + break; + } else if (c == '\n') + break; + } + + *p = '\0'; +} + +/* This function wraps-up the eexec-encrypted data and writes ASCII trailer. + If output is in PFB format then this entails flushing binary block and + starting an ASCII block. */ + +static void eexec_end(void) +{ + int i, j; + + if (!pfb) + putc('\n', ofp); + else if (w.blocktyp != PFB_ASCII) { + pfb_writer_output_block(&w); + w.blocktyp = PFB_ASCII; + } + + in_eexec = active = 0; + + for (i = 0; i < 8; i++) { + for (j = 0; j < 64; j++) + eexec_byte('0'); + eexec_byte('\n'); + } +} + +/* This function is used by the binary search, bsearch(), for command names in + the command table. */ + +static int command_compare(const void *key, const void *item) +{ + return strcmp((const char *) key, ((const struct command *) item)->name); +} + +/* This function returns 1 if the string is an integer and 0 otherwise. */ + +static int is_integer(char *string) +{ + if (isdigit(string[0]) || string[0] == '-' || string[0] == '+') { + while (*++string && isdigit(*string)) + ; /* deliberately empty */ + if (!*string) + return 1; + } + return 0; +} + +/* This function initializes charstring encryption. Note that this is called + at the beginning of every charstring. */ + +static void charstring_start() +{ + int i; + + charstring_bp = charstring_buf; + cr = 4330; + for (i = 0; i < lenIV; i++) + *charstring_bp++ = cencrypt((byte) 0); +} + +/* This function encrypts and buffers a single byte of charstring data. */ + +static void charstring_byte(int v) +{ + byte b = (byte)(v & 0xff); + if (charstring_bp - charstring_buf > (int)sizeof(charstring_buf)) + fatal_error("charstring buffer overflow"); + *charstring_bp++ = cencrypt(b); +} + +/* This function outputs buffered, encrypted charstring data through possible + eexec encryption. */ + +static void charstring_end() +{ + byte *bp; + + sprintf(line, "%d ", (int) (charstring_bp - charstring_buf)); + eexec_string(line); + sprintf(line, "%s ", cs_start); + eexec_string(line); + for (bp = charstring_buf; bp < charstring_bp; bp++) + eexec_byte(*bp); +} + +/* This function generates the charstring representation of an integer. */ + +static void charstring_int(int num) +{ + int x; + + if (num >= -107 && num <= 107) { + charstring_byte(num + 139); + } else if (num >= 108 && num <= 1131) { + x = num - 108; + charstring_byte(x / 256 + 247); + charstring_byte(x % 256); + } else if (num >= -1131 && num <= -108) { + x = abs(num) - 108; + charstring_byte(x / 256 + 251); + charstring_byte(x % 256); + } else if (num >= (-2147483647-1) && num <= 2147483647) { + charstring_byte(255); + charstring_byte(num >> 24); + charstring_byte(num >> 16); + charstring_byte(num >> 8); + charstring_byte(num); + } else { + error("can't format huge number `%d'", num); + /* output 0 instead */ + charstring_byte(139); + } +} + +/* This function returns one charstring token. It ignores comments. */ + +static void get_charstring_token() +{ + int c = getc(ifp); + while (isspace(c)) + c = getc(ifp); + + if (c == '%') { + while (c != EOF && c != '\r' && c != '\n') + c = getc(ifp); + get_charstring_token(); + + } else if (c == '}') { + line[0] = '}'; + line[1] = 0; + + } else { + char *p = line; + while (p < line + LINESIZE) { + *p++ = c; + c = getc(ifp); + if (c == EOF || isspace(c) || c == '%' || c == '}') { + ungetc(c, ifp); + break; + } + } + *p = 0; + } +} + + +/* This function parses an entire charstring into integers and commands, + outputting bytes through the charstring buffer. */ + +static void parse_charstring() +{ + struct command *cp; + + charstring_start(); + while (!feof(ifp)) { + get_charstring_token(); + if (line[0] == '}') + break; + if (is_integer(line)) { + charstring_int(atoi(line)); + } else { + int one; + int two; + int ok = 0; + + cp = (struct command *) + bsearch((void *) line, (void *) command_table, + sizeof(command_table) / sizeof(struct command), + sizeof(struct command), + command_compare); + + if (cp) { + one = cp->one; + two = cp->two; + ok = 1; + + } else if (strncmp(line, "escape_", 7) == 0) { + /* Parse the `escape' keyword requested by Lee Chun-Yu and Werner + Lemberg */ + one = 12; + if (sscanf(line + 7, "%d", &two) == 1) + ok = 1; + + } else if (strncmp(line, "UNKNOWN_", 8) == 0) { + /* Allow unanticipated UNKNOWN commands. */ + one = 12; + if (sscanf(line + 8, "12_%d", &two) == 1) + ok = 1; + else if (sscanf(line + 8, "%d", &one) == 1) { + two = -1; + ok = 1; + } + } + + if (!ok) + error("unknown charstring command `%s'", line); + else if (one < 0 || one > 255) + error("bad charstring command number `%d'", one); + else if (two > 255) + error("bad charstring command number `%d'", two); + else if (two < 0) + charstring_byte(one); + else { + charstring_byte(one); + charstring_byte(two); + } + } + } + charstring_end(); +} + + +/***** + * Command line + **/ + +#define BLOCK_LEN_OPT 300 +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 +#define PFB_OPT 304 +#define PFA_OPT 305 + +static Clp_Option options[] = { + { "block-length", 'l', BLOCK_LEN_OPT, Clp_ArgInt, 0 }, + { "help", 0, HELP_OPT, 0, 0 }, + { "line-length", 0, BLOCK_LEN_OPT, Clp_ArgInt, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "pfa", 'a', PFA_OPT, 0, 0 }, + { "pfb", 'b', PFB_OPT, 0, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, +}; +static const char *program_name; + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); +} + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + +void +usage(void) +{ + printf("\ +`T1asm' translates a human-readable version of a PostScript Type 1 font into\n\ +standard PFB or PFA format. The result is written to the standard output\n\ +unless an OUTPUT file is given.\n\ +\n\ +Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +\n\ +Options:\n\ + -a, --pfa Output font in ASCII (PFA) format.\n\ + -b, --pfb Output font in binary (PFB) format. This is\n\ + the default.\n\ + -l, --block-length NUM Set max block length for PFB output.\n\ + -l, --line-length NUM Set max encrypted line length for PFA output.\n\ + -o, --output=FILE Write output to FILE.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + +#ifdef __cplusplus +} +#endif + + +int main(int argc, char *argv[]) +{ + char *p, *q, *r; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + case BLOCK_LEN_OPT: + blocklen = clp->val.i; + break; + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp = fopen(clp->arg, "w"); + if (!ofp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case PFB_OPT: + pfb = 1; + break; + + case PFA_OPT: + pfb = 0; + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1asm (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 1992-2003 I. Lee Hetherington, Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) + ifp = stdin; + else { + ifp = fopen(clp->arg, "r"); + if (!ifp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!pfb) { + if (blocklen == -1) + blocklen = 64; + else if (blocklen < 8) { + blocklen = 8; + error("warning: line length raised to %d", blocklen); + } else if (blocklen > 1024) { + blocklen = 1024; + error("warning: line length lowered to %d", blocklen); + } + } + + if (!ifp) ifp = stdin; + if (!ofp) ofp = stdout; + + if (pfb) + init_pfb_writer(&w, blocklen, ofp); + +#if defined(_MSDOS) || defined(_WIN32) + /* If we are processing a PFB (binary) output */ + /* file, we must set its file mode to binary. */ + if (pfb) + _setmode(_fileno(ofp), _O_BINARY); +#endif + + /* Finally, we loop until no more input. Some special things to look for are + the `currentfile eexec' line, the beginning of the `/Subrs' or + `/CharStrings' definition, the definition of `/lenIV', and the definition + of the charstring start command which has `...string currentfile...' in + it. + + Being careful: Check with `/Subrs' and `/CharStrings' to see that a + number follows the token -- otherwise, the token is probably nested in a + subroutine a la Adobe Jenson, and we shouldn't pay attention to it. + + Bugs: Occurrence of `/Subrs 9' in a comment will fool t1asm. + + Thanks to Tom Kacvinsky <tjk@ams.org> who reported that some fonts come + without /Subrs sections and provided a patch. */ + + while (!feof(ifp) && !ferror(ifp)) { + getline(); + + if (!ever_active) { + if (strncmp(line, "currentfile eexec", 17) == 0 && isspace(line[17])) { + /* Allow arbitrary whitespace after "currentfile eexec". + Thanks to Tom Kacvinsky <tjk@ams.org> for reporting this. + Note: strlen("currentfile eexec") == 17. */ + for (p = line + 18; isspace(*p); p++) + ; + eexec_start(p); + continue; + } else if (strncmp(line, "/lenIV", 6) == 0) { + lenIV = atoi(line + 6); + } else if ((p = strstr(line, "string currentfile")) + && strstr(line, "readstring")) { /* enforce `readstring' */ + /* locate the name of the charstring start command */ + *p = '\0'; /* damage line[] */ + q = strrchr(line, '/'); + if (q) { + r = cs_start; + ++q; + while (!isspace(*q) && *q != '{') + *r++ = *q++; + *r = '\0'; + } + *p = 's'; /* repair line[] */ + } + } + + if (!active) { + if ((p = strstr(line, "/Subrs")) && isdigit(p[7])) + ever_active = active = 1; + else if ((p = strstr(line, "/CharStrings")) && isdigit(p[13])) + ever_active = active = 1; + } + if ((p = strstr(line, "currentfile closefile"))) { + /* 2/14/99 -- happy Valentine's day! -- don't look for `mark + currentfile closefile'; the `mark' might be on a different line */ + /* 1/3/2002 -- happy new year! -- Luc Devroye reports a failure with + some printers when `currentfile closefile' is followed by space */ + p += sizeof("currentfile closefile") - 1; + for (q = p; isspace(*q) && *q != '\n'; q++) + /* nada */; + if (q == p && !*q) + error("warning: `currentfile closefile' line too long"); + else if (q != p) { + if (*q != '\n') + error("text after `currentfile closefile' ignored"); + *p++ = '\n'; + *p++ = '\0'; + } + eexec_string(line); + break; + } + + eexec_string(line); + + /* output line data */ + if (start_charstring) { + if (!cs_start[0]) + fatal_error("couldn't find charstring start command"); + parse_charstring(); + } + } + + /* Handle remaining PostScript after the eexec section */ + if (in_eexec) + eexec_end(); + + /* There may be additional code. */ + while (!feof(ifp) && !ferror(ifp)) { + getline(); + eexec_string(line); + } + + if (pfb) + pfb_writer_end(&w); + + /* the end! */ + if (!ever_active) + error("warning: no charstrings found in input file"); + fclose(ifp); + fclose(ofp); + return 0; +} diff --git a/Build/source/utils/t1utils/t1binary.1 b/Build/source/utils/t1utils/t1binary.1 new file mode 100644 index 00000000000..fc41bcacc87 --- /dev/null +++ b/Build/source/utils/t1utils/t1binary.1 @@ -0,0 +1,42 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1BINARY 1 "" "Version \*V" +.SH NAME +t1binary \- convert PostScript Type 1 font from ASCII to binary +.SH SYNOPSIS +.B t1binary +\%[\fB\-l\fR \fIlength\fR] +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.B t1binary +converts Adobe Type 1 font programs in PFA (hexadecimal) format to PFB +(binary) format. If the file +.I output +is not specified output goes to the standard output. +If the file +.I input +is not specified input comes from the standard input. +.SH OPTIONS +.TP 5 +.BI \-\-block\-length= "length\fR, " \-l " length" +Set the maximum length of sections in PFB output to +.I length. +The default length is as large as memory allows. +.SH "SEE ALSO" +.LP +.M t1ascii 1 , +.M t1unmac 1 , +.M t1mac 1 , +.M t1disasm 1 , +.M t1asm 1 +.LP +.I "Adobe Type 1 Font Format" +.SH AUTHORS +Lee Hetherington (ilh@lcs.mit.edu) +.br +Eddie Kohler (kohler@icir.org) +.PP +Ported to Microsoft C/C++ Compiler and MS-DOS operating system by +Kai-Uwe Herbing (herbing@netmbx.netmbx.de). diff --git a/Build/source/utils/t1utils/t1binary.c b/Build/source/utils/t1utils/t1binary.c new file mode 100644 index 00000000000..b49658b0cba --- /dev/null +++ b/Build/source/utils/t1utils/t1binary.c @@ -0,0 +1,283 @@ +/* t1binary + * + * This program takes an Adobe Type-1 font program in ASCII (PFA) format and + * converts it to binary (PFB) format. + * + * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. + * + * I. Lee Hetherington (ilh@lcs.mit.edu) + * + * 1.5 and later versions contain changes by, and are maintained by, + * Eddie Kohler <kohler@icir.org>. + * + * New change log in `NEWS'. Old change log: + * + * Revision 1.2 92/06/23 10:58:08 ilh + * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) + * incoporated. + * + * Revision 1.1 92/05/22 11:58:17 ilh + * initial version + * + * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by + * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code + * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS + * ... #endif, where _MSDOS is an identifier, which is automatically + * defined, if you compile with the Microsoft C/C++ Compiler. + * + */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <limits.h> +#include <stdarg.h> +#include <errno.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef unsigned char byte; + +/* for PFB block buffering */ +static struct pfb_writer w; + +void fatal_error(const char *message, ...); +void error(const char *message, ...); + + +/* PFB font_reader functions */ + +static void +pfb_output_ascii(char *s, int len) +{ + if (w.blocktyp == PFB_BINARY) { + pfb_writer_output_block(&w); + w.blocktyp = PFB_ASCII; + } + for (; len > 0; len--, s++) + PFB_OUTPUT_BYTE(&w, (byte)*s); +} + +static void +pfb_output_binary(unsigned char *s, int len) +{ + if (w.blocktyp == PFB_ASCII) { + pfb_writer_output_block(&w); + w.blocktyp = PFB_BINARY; + } + for (; len > 0; len--, s++) + PFB_OUTPUT_BYTE(&w, *s); +} + +static void +pfb_output_end() +{ + pfb_writer_end(&w); +} + + +/***** + * Command line + **/ + +#define BLOCK_LEN_OPT 300 +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 + +static Clp_Option options[] = { + { "block-length", 'l', BLOCK_LEN_OPT, Clp_ArgInt, 0 }, + { "help", 0, HELP_OPT, 0, 0 }, + { "length", 0, BLOCK_LEN_OPT, Clp_ArgInt, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, +}; +static const char *program_name; + + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); +} + + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + + +void +usage(void) +{ + printf("\ +`T1binary' translates a PostScript Type 1 font from ASCII (PFA) to compact\n\ +binary (PFB) format. The result is written to the standard output unless an\n\ +OUTPUT file is given.\n\ +\n\ +Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +\n\ +Options:\n\ + -l, --block-length=NUM Set max output block length.\n\ + -o, --output=FILE Write output to FILE.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + +#ifdef __cplusplus +} +#endif + + +int +main(int argc, char *argv[]) +{ + int c; + FILE *ifp = 0, *ofp = 0; + const char *ifp_filename = "<stdin>"; + struct font_reader fr; + int max_blocklen = -1; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + case BLOCK_LEN_OPT: + max_blocklen = clp->val.i; + if (max_blocklen <= 0) { + max_blocklen = 1; + error("warning: block length raised to %d", max_blocklen); + } + break; + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp = fopen(clp->arg, "wb"); + if (!ofp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1binary (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 1992-2003 I. Lee Hetherington, Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) + ifp = stdin; + else { + ifp_filename = clp->arg; + ifp = fopen(clp->arg, "r"); + if (!ifp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!ifp) ifp = stdin; + if (!ofp) ofp = stdout; + +#if defined(_MSDOS) || defined(_WIN32) + /* As we are processing a PFB (binary) output */ + /* file, we must set its file mode to binary. */ + _setmode(_fileno(ofp), _O_BINARY); +#endif + + /* prepare font reader and pfb writer */ + fr.output_ascii = pfb_output_ascii; + fr.output_binary = pfb_output_binary; + fr.output_end = pfb_output_end; + init_pfb_writer(&w, max_blocklen, ofp); + + /* peek at first byte to see if it is the PFB marker 0x80 */ + c = getc(ifp); + ungetc(c, ifp); + + /* do the file */ + if (c == PFB_MARKER) + process_pfb(ifp, ifp_filename, &fr); + else if (c == '%') + process_pfa(ifp, ifp_filename, &fr); + else + fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); + + fclose(ifp); + fclose(ofp); + + if (!w.binary_blocks_written) + fatal_error("no binary blocks written! Are you sure this was a font?"); + + return 0; +} diff --git a/Build/source/utils/t1utils/t1disasm.1 b/Build/source/utils/t1utils/t1disasm.1 new file mode 100644 index 00000000000..381bfb1b607 --- /dev/null +++ b/Build/source/utils/t1utils/t1disasm.1 @@ -0,0 +1,96 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1DISASM 1 "" "Version \*V" +.SH NAME +t1disasm \- disassemble PostScript Type 1 font +.SH SYNOPSIS +.B t1disasm +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.B t1disasm +disassembles Adobe Type 1 font programs in either PFA (hexadecimal) or PFB +(binary) formats into human-readable form. If the file +.I output +is not specified output goes to the standard output. +If the file +.I input +is not specified input comes from the standard input. + +.B t1disasm +performs eexec and charstring decryption as specified in the ``black +book'', +.I "Adobe Type 1 Font Format." +Additionally, the charstring binary tokens are expanded into human-readable +text form, using the names given in the black book and later documents +describing Type 2 opcodes. +.SH EXAMPLES +.LP +.nf +% t1disasm Utopia-Regular.pfb Utopia-Regular.raw +% t1disasm Utopia-Regular.pfa Utopia-Regular.raw +.fi + +In +.B Subrs +entries in Utopia-Regular.raw will look like +.RS +.nf +.ft B +dup 5 { + 8 111 vstem + -12 128 hstem + 707 -20 hstem + return + } | +.ft R +.fi +.RE +and the +.B CharStrings +entries like +.RS +.nf +.ft B +/exclam { + 58 242 hsbw + 6 callsubr + 5 4 callsubr + 63 707 rmoveto + -54 0 -5 -22 4 -45 rrcurveto + 40 -431 rlineto + 29 hlineto + 42 431 rlineto + 4 45 -5 22 -55 0 rrcurveto + closepath + 6 4 callsubr + -719 vmoveto + 243 callsubr + endchar + } |- +.ft R +.fi +.RE +.SH "SEE ALSO" +.LP +.M t1asm 1 , +.M t1ascii 1 , +.M t1binary 1 , +.M t1unmac 1 , +.M t1mac 1 +.LP +.I "Adobe Type 1 Font Format" +is available free from Adobe as a PDF file: +http://partners.adobe.com/asn/developer/PDFS/TN/T1_SPEC.PDF +.LP +.I "The Type 2 Charstring Format," +also available from Adobe as a PDF file, describes the newer Type 2 +operators, which are also used in some multiple-master Type 1 fonts like +Adobe Jenson and Kepler: +http://partners.adobe.com/asn/developer/PDFS/TN/5177.Type2.pdf +' +.SH AUTHORS +Lee Hetherington (ilh@lcs.mit.edu) +.br +Eddie Kohler (kohler@icir.org) diff --git a/Build/source/utils/t1utils/t1disasm.c b/Build/source/utils/t1utils/t1disasm.c new file mode 100644 index 00000000000..21dc659cb01 --- /dev/null +++ b/Build/source/utils/t1utils/t1disasm.c @@ -0,0 +1,777 @@ +/* t1disasm + * + * This program `disassembles' Adobe Type-1 font programs in either PFB or PFA + * format. It produces a human readable/editable pseudo-PostScript file by + * performing eexec and charstring decryption as specified in the `Adobe Type 1 + * Font Format' version 1.1 (the `black book'). There is a companion program, + * t1asm, which `assembles' such a pseudo-PostScript file into either PFB or + * PFA format. + * + * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. + * + * I. Lee Hetherington (ilh@lcs.mit.edu) + * + * 1.5 and later versions contain changes by, and are maintained by, + * Eddie Kohler <kohler@icir.org>. + * + * New change log in `NEWS'. Old change log: + * + * Revision 1.4 92/07/10 10:55:08 ilh + * Added support for additional PostScript after the closefile command + * (ie., some fonts have {restore}if' after the cleartomark). Also, + * removed hardwired charstring start command (-| or RD) in favor of + * automatically determining it. + * + * Revision 1.3 92/06/23 10:57:53 ilh + * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) + * incoporated. + * + * Revision 1.2 92/05/22 12:05:33 ilh + * Fixed bug where we were counting on sprintf to return its first + * argument---not true in ANSI C. This bug was detected by Piet + * Tutelaers (rcpt@urc.tue.nl). Also, fixed (signed) integer overflow + * error when testing high-order bit of integer for possible + * sign-extension by making comparison between unsigned integers. + * + * Revision 1.1 92/05/22 12:04:07 ilh + * initial version + * + * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by + * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code + * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS + * ... #endif, where _MSDOS is an identifier, which is automatically + * defined, if you compile with the Microsoft C/C++ Compiler. + * + */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <limits.h> +#include <stdarg.h> +#include <errno.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef unsigned char byte; + +static FILE *ofp; +static int lenIV = 4; +static char cs_start[10]; +static int unknown = 0; + +/* decryption stuff */ +static uint16_t c1 = 52845, c2 = 22719; +static uint16_t cr_default = 4330; +static uint16_t er_default = 55665; + +static int error_count = 0; +void fatal_error(const char *message, ...); +void error(const char *message, ...); + +/* If the line contains an entry of the form `/lenIV <num>' then set the global + lenIV to <num>. This indicates the number of random bytes at the beginning + of each charstring. */ + +static void +set_lenIV(char *line) +{ + char *p = strstr(line, "/lenIV "); + + /* Allow lenIV to be negative. Thanks to Tom Kacvinsky <tjk@ams.org> */ + if (p && (isdigit(p[7]) || p[7] == '+' || p[7] == '-')) { + lenIV = atoi(p + 7); + } +} + +static void +set_cs_start(char *line) +{ + char *p, *q, *r; + + if ((p = strstr(line, "string currentfile"))) { + /* enforce presence of `readstring' -- 5/29/99 */ + if (!strstr(line, "readstring")) + return; + /* locate the name of the charstring start command */ + *p = '\0'; /* damage line[] */ + q = strrchr(line, '/'); + if (q) { + r = cs_start; + ++q; + while (!isspace(*q) && *q != '{') + *r++ = *q++; + *r = '\0'; + } + *p = 's'; /* repair line[] */ + } +} + +/* Subroutine to output strings. */ + +static void +output(const char *string) +{ + fprintf(ofp, "%s", string); +} + +/* Subroutine to neatly format output of charstring tokens. If token = "\n", + then a newline is output. If at start of line (start == 1), prefix token + with tab, otherwise a space. */ + +static void +output_token(const char *token) +{ + static int start = 1; + if (strcmp(token, "\n") == 0) { + fprintf(ofp, "\n"); + start = 1; + } else { + fprintf(ofp, "%s%s", start ? "\t" : " ", token); + start = 0; + } +} + +/* Subroutine to decrypt and ASCII-ify tokens in charstring data. The + charstring decryption machinery is fired up, skipping the first lenIV + bytes, and the decrypted tokens are expanded into human-readable form. */ + +static void +decrypt_charstring(unsigned char *line, int len) +{ + int i; + int32_t val; + char buf[20]; + + /* decrypt charstring */ + if (lenIV >= 0) { + /* only decrypt if lenIV >= 0 -- negative lenIV means unencrypted + charstring. Thanks to Tom Kacvinsky <tjk@ams.org> */ + uint16_t cr = cr_default; + byte plain; + for (i = 0; i < len; i++) { + byte cipher = line[i]; + plain = (byte)(cipher ^ (cr >> 8)); + cr = (uint16_t)((cipher + cr) * c1 + c2); + line[i] = plain; + } + line += lenIV; + len -= lenIV; + } + + /* handle each charstring command */ + for (i = 0; i < len; i++) { + byte b = line[i]; + + if (b >= 32) { + if (b >= 32 && b <= 246) + val = b - 139; + else if (b >= 247 && b <= 250) { + i++; + val = (b - 247)*256 + 108 + line[i]; + } else if (b >= 251 && b <= 254) { + i++; + val = -(b - 251)*256 - 108 - line[i]; + } else { + val = (line[i+1] & 0xff) << 24; + val |= (line[i+2] & 0xff) << 16; + val |= (line[i+3] & 0xff) << 8; + val |= (line[i+4] & 0xff) << 0; + /* in case an int32 is larger than four bytes---sign extend */ +#if INT_MAX > 0x7FFFFFFFUL + if (val & 0x80000000) + val |= ~0x7FFFFFFF; +#endif + i += 4; + } + sprintf(buf, "%d", val); + output_token(buf); + + } else { + switch (b) { + case 0: output_token("error"); break; /* special */ + case 1: output_token("hstem"); break; + case 3: output_token("vstem"); break; + case 4: output_token("vmoveto"); break; + case 5: output_token("rlineto"); break; + case 6: output_token("hlineto"); break; + case 7: output_token("vlineto"); break; + case 8: output_token("rrcurveto"); break; + case 9: output_token("closepath"); break; /* Type 1 ONLY */ + case 10: output_token("callsubr"); break; + case 11: output_token("return"); break; + case 13: output_token("hsbw"); break; /* Type 1 ONLY */ + case 14: output_token("endchar"); break; + case 16: output_token("blend"); break; /* Type 2 */ + case 18: output_token("hstemhm"); break; /* Type 2 */ + case 19: output_token("hintmask"); break; /* Type 2 */ + case 20: output_token("cntrmask"); break; /* Type 2 */ + case 21: output_token("rmoveto"); break; + case 22: output_token("hmoveto"); break; + case 23: output_token("vstemhm"); break; /* Type 2 */ + case 24: output_token("rcurveline"); break; /* Type 2 */ + case 25: output_token("rlinecurve"); break; /* Type 2 */ + case 26: output_token("vvcurveto"); break; /* Type 2 */ + case 27: output_token("hhcurveto"); break; /* Type 2 */ + case 28: { /* Type 2 */ + /* short integer */ + val = (line[i+1] & 0xff) << 8; + val |= (line[i+2] & 0xff); + i += 2; + if (val & 0x8000) + val |= ~0x7FFF; + sprintf(buf, "%d", val); + output_token(buf); + } + case 29: output_token("callgsubr"); break; /* Type 2 */ + case 30: output_token("vhcurveto"); break; + case 31: output_token("hvcurveto"); break; + case 12: + i++; + b = line[i]; + switch (b) { + case 0: output_token("dotsection"); break; /* Type 1 ONLY */ + case 1: output_token("vstem3"); break; /* Type 1 ONLY */ + case 2: output_token("hstem3"); break; /* Type 1 ONLY */ + case 3: output_token("and"); break; /* Type 2 */ + case 4: output_token("or"); break; /* Type 2 */ + case 5: output_token("not"); break; /* Type 2 */ + case 6: output_token("seac"); break; /* Type 1 ONLY */ + case 7: output_token("sbw"); break; /* Type 1 ONLY */ + case 8: output_token("store"); break; /* Type 2 */ + case 9: output_token("abs"); break; /* Type 2 */ + case 10: output_token("add"); break; /* Type 2 */ + case 11: output_token("sub"); break; /* Type 2 */ + case 12: output_token("div"); break; + case 13: output_token("load"); break; /* Type 2 */ + case 14: output_token("neg"); break; /* Type 2 */ + case 15: output_token("eq"); break; /* Type 2 */ + case 16: output_token("callothersubr"); break; /* Type 1 ONLY */ + case 17: output_token("pop"); break; /* Type 1 ONLY */ + case 18: output_token("drop"); break; /* Type 2 */ + case 20: output_token("put"); break; /* Type 2 */ + case 21: output_token("get"); break; /* Type 2 */ + case 22: output_token("ifelse"); break; /* Type 2 */ + case 23: output_token("random"); break; /* Type 2 */ + case 24: output_token("mul"); break; /* Type 2 */ + case 26: output_token("sqrt"); break; /* Type 2 */ + case 27: output_token("dup"); break; /* Type 2 */ + case 28: output_token("exch"); break; /* Type 2 */ + case 29: output_token("index"); break; /* Type 2 */ + case 30: output_token("roll"); break; /* Type 2 */ + case 33: output_token("setcurrentpoint"); break;/* Type 1 ONLY */ + case 34: output_token("hflex"); break; /* Type 2 */ + case 35: output_token("flex"); break; /* Type 2 */ + case 36: output_token("hflex1"); break; /* Type 2 */ + case 37: output_token("flex1"); break; /* Type 2 */ + default: + sprintf(buf, "escape_%d", b); + unknown++; + output_token(buf); + break; + } + break; + default: + sprintf(buf, "UNKNOWN_%d", b); + unknown++; + output_token(buf); + break; + } + output_token("\n"); + } + } + if (i > len) { + output("\terror\n"); + error("disassembly error: charstring too short"); + } +} + + +/* Disassembly font_reader functions */ + +static int in_eexec = 0; +static unsigned char *save = 0; +static int save_len = 0; +static int save_cap = 0; + +static void +append_save(unsigned char *line, int len) +{ + if (save_len + len >= save_cap) { + unsigned char *new_save; + if (!save_cap) save_cap = 1024; + while (save_len + len >= save_cap) save_cap *= 2; + new_save = (unsigned char *)malloc(save_cap); + if (!new_save) + fatal_error("out of memory"); + memcpy(new_save, save, save_len); + free(save); + save = new_save; + } + memcpy(save + save_len, line, len); + save_len += len; +} + +/* 23.Feb.2004 - use 'memstr', not strstr, because the strings input to + eexec_line aren't null terminated! Reported by Werner Lemberg. */ + +static const char * +oog_memstr(const char *line, int line_len, const char *pattern, int pattern_len) +{ + const char *try; + const char *last = line + line_len - pattern_len + 1; + while (line < last + && (try = memchr(line, (unsigned char)*pattern, last - line))) { + if (memcmp(try, pattern, pattern_len) == 0) + return try; + else + line = try + 1; + } + return 0; +} + +/* returns 1 if next \n should be deleted */ + +static int +eexec_line(unsigned char *line, int line_len) +{ + int cs_start_len = strlen(cs_start); + int pos; + int first_space; + int digits; + int cut_newline = 0; + + /* append this data to the end of `save' if necessary */ + if (save_len) { + append_save(line, line_len); + line = save; + line_len = save_len; + } + + if (!line_len) + return 0; + + /* Look for charstring start */ + + /* skip first word */ + for (pos = 0; pos < line_len && isspace(line[pos]); pos++) + ; + while (pos < line_len && !isspace(line[pos])) + pos++; + if (pos >= line_len) + goto not_charstring; + + /* skip spaces */ + first_space = pos; + while (pos < line_len && isspace(line[pos])) + pos++; + if (pos >= line_len || !isdigit(line[pos])) + goto not_charstring; + + /* skip number */ + digits = pos; + while (pos < line_len && isdigit(line[pos])) + pos++; + + /* check for subr (another number) */ + if (pos < line_len - 1 && isspace(line[pos]) && isdigit(line[pos+1])) { + first_space = pos; + digits = pos + 1; + for (pos = digits; pos < line_len && isdigit(line[pos]); pos++) + ; + } + + /* check for charstring start */ + if (pos + 2 + cs_start_len < line_len + && pos > digits + && line[pos] == ' ' + && strncmp((const char *)(line + pos + 1), cs_start, cs_start_len) == 0 + && line[pos + 1 + cs_start_len] == ' ') { + /* check if charstring is long enough */ + int cs_len = atoi((const char *)(line + digits)); + if (pos + 2 + cs_start_len + cs_len < line_len) { + /* long enough! */ + if (line[line_len - 1] == '\r') { + line[line_len - 1] = '\n'; + cut_newline = 1; + } + fprintf(ofp, "%.*s {\n", first_space, line); + decrypt_charstring(line + pos + 2 + cs_start_len, cs_len); + pos += 2 + cs_start_len + cs_len; + fprintf(ofp, "\t}%.*s", line_len - pos, line + pos); + save_len = 0; + return cut_newline; + } else { + /* not long enough! */ + if (line != save) + append_save(line, line_len); + return 0; + } + } + + /* otherwise, just output the line */ + not_charstring: + /* 6.Oct.2003 - Werner Lemberg reports a stupid Omega font that behaves + badly: a charstring definition follows "/Charstrings ... begin", ON THE + SAME LINE. */ + { + const char *CharStrings = oog_memstr(line, line_len, "/CharStrings ", 13); + int crap, n; + char should_be_slash = 0; + if (CharStrings + && sscanf(CharStrings + 12, " %d dict dup begin %c%n", &crap, &should_be_slash, &n) >= 2 + && should_be_slash == '/') { + int len = (CharStrings + 12 + n - 1) - (char *) line; + fprintf(ofp, "%.*s\n", len, line); + return eexec_line((unsigned char *) (CharStrings + 12 + n - 1), line_len - len); + } + } + + if (line[line_len - 1] == '\r') { + line[line_len - 1] = '\n'; + cut_newline = 1; + } + set_lenIV((char *)line); + set_cs_start((char *)line); + fprintf(ofp, "%.*s", line_len, line); + save_len = 0; + + /* look for `currentfile closefile' to see if we should stop decrypting */ + if (oog_memstr(line, line_len, "currentfile closefile", 21) != 0) + in_eexec = -1; + + return cut_newline; +} + +static int +all_zeroes(const char *string) +{ + if (*string != '0') + return 0; + while (*string == '0') + string++; + return *string == '\0' || *string == '\n'; +} + +static void +disasm_output_ascii(char *line, int len) +{ + int was_in_eexec = in_eexec; + (void) len; /* avoid warning */ + in_eexec = 0; + + /* if we came from a binary section, we need to process that too */ + if (was_in_eexec > 0) + eexec_line("", 0); + + /* if we just came from the "ASCII part" of an eexec section, we need to + process the saved lines */ + if (was_in_eexec < 0) { + int i = 0; + int save_char = 0; /* note: save[] is unsigned char * */ + + while (i < save_len) { + /* grab a line */ + int start = i; + while (i < save_len && save[i] != '\r' && save[i] != '\n') + i++; + if (i < save_len) { + if (i < save_len - 1 && save[i] == '\r' && save[i+1] == '\n') + save_char = -1; + else + save_char = save[i+1]; + save[i] = '\n'; + save[i+1] = 0; + } else + save[i] = 0; + + /* output it */ + disasm_output_ascii((char *)(save + start), -1); + + /* repair damage */ + if (i < save_len) { + if (save_char >= 0) { + save[i+1] = save_char; + i++; + } else + i += 2; + } + } + save_len = 0; + } + + if (!all_zeroes(line)) + output(line); +} + +/* collect until '\n' or end of binary section */ + +static void +disasm_output_binary(unsigned char *data, int len) +{ + static int ignore_newline; + static uint16_t er; + + byte plain; + int i; + + /* in the ASCII portion of a binary section, just save this data */ + if (in_eexec < 0) { + append_save(data, len); + return; + } + + /* eexec initialization */ + if (in_eexec == 0) { + er = er_default; + ignore_newline = 0; + in_eexec = 0; + } + if (in_eexec < 4) { + for (i = 0; i < len && in_eexec < 4; i++, in_eexec++) { + byte cipher = data[i]; + plain = (byte)(cipher ^ (er >> 8)); + er = (uint16_t)((cipher + er) * c1 + c2); + data[i] = plain; + } + data += i; + len -= i; + } + + /* now make lines: collect until '\n' or '\r' and pass them off to + eexec_line. */ + i = 0; + while (in_eexec > 0) { + int start = i; + + for (; i < len; i++) { + byte cipher = data[i]; + plain = (byte)(cipher ^ (er >> 8)); + er = (uint16_t)((cipher + er) * c1 + c2); + data[i] = plain; + if (plain == '\r' || plain == '\n') + break; + } + + if (ignore_newline && start < i && data[start] == '\n') { + ignore_newline = 0; + continue; + } + + if (i >= len) { + if (start < len) + append_save(data + start, i - start); + break; + } + + i++; + ignore_newline = eexec_line(data + start, i - start); + } + + /* if in_eexec < 0, we have some plaintext lines sitting around in a binary + section of the PFB. save them for later */ + if (in_eexec < 0 && i < len) + append_save(data + i, len - i); +} + +static void +disasm_output_end() +{ + /* take care of leftover saved data */ + static char crap[1] = ""; + disasm_output_ascii(crap, 0); +} + + +/***** + * Command line + **/ + +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 + +static Clp_Option options[] = { + { "help", 0, HELP_OPT, 0, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, +}; +static const char *program_name; + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + fputc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + fputc('\n', stderr); + error_count++; +} + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [INPUT [OUTPUT]]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + +void +usage(void) +{ + printf("\ +`T1disasm' translates a PostScript Type 1 font in PFB or PFA format into a\n\ +human-readable, human-editable form. The result is written to the standard\n\ +output unless an OUTPUT file is given.\n\ +\n\ +Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +\n\ +Options:\n\ + -o, --output=FILE Write output to FILE.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + +#ifdef __cplusplus +} +#endif + + +int +main(int argc, char *argv[]) +{ + struct font_reader fr; + int c; + FILE *ifp = 0; + const char *ifp_filename = "<stdin>"; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp = fopen(clp->arg, "w"); + if (!ofp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1disasm (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 1992-2003 I. Lee Hetherington, Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) + ifp = stdin; + else { + ifp_filename = clp->arg; + ifp = fopen(clp->arg, "rb"); + if (!ifp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!ifp) ifp = stdin; + if (!ofp) ofp = stdout; + +#if defined(_MSDOS) || defined(_WIN32) + /* As we might be processing a PFB (binary) input file, we must set its file + mode to binary. */ + _setmode(_fileno(ifp), _O_BINARY); +#endif + + /* prepare font reader */ + fr.output_ascii = disasm_output_ascii; + fr.output_binary = disasm_output_binary; + fr.output_end = disasm_output_end; + + /* peek at first byte to see if it is the PFB marker 0x80 */ + c = getc(ifp); + ungetc(c, ifp); + + /* do the file */ + if (c == PFB_MARKER) + process_pfb(ifp, ifp_filename, &fr); + else if (c == '%') + process_pfa(ifp, ifp_filename, &fr); + else + fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); + + fclose(ifp); + fclose(ofp); + + if (unknown) + error((unknown > 1 + ? "encountered %d unknown charstring commands" + : "encountered %d unknown charstring command"), + unknown); + + return (error_count ? 1 : 0); +} diff --git a/Build/source/utils/t1utils/t1lib.c b/Build/source/utils/t1utils/t1lib.c new file mode 100644 index 00000000000..5c8460b089f --- /dev/null +++ b/Build/source/utils/t1utils/t1lib.c @@ -0,0 +1,441 @@ +/* t1lib + * + * This file contains functions for reading PFA and PFB files. + * + * (C) 1999-2003 Eddie Kohler <kohler@icir.org>, after code by + * I. Lee Hetherington <ilh@lcs.mit.edu>. All rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice remains intact. + * + */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <ctype.h> +#include <string.h> +#include "t1lib.h" +#ifdef __cplusplus +extern "C" { +#endif + +#define PFA_ASCII 1 +#define PFA_EEXEC_TEST 2 +#define PFA_HEX 3 +#define PFA_BINARY 4 + +/* This function returns the value (0-15) of a single hex digit. It returns + 0 for an invalid hex digit. */ + +static int +hexval(char c) +{ + if (c >= 'A' && c <= 'F') + return c - 'A' + 10; + else if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + else if (c >= '0' && c <= '9') + return c - '0'; + else + return 0; +} + +/* This function translates a string of hexadecimal digits into binary data. + We allow an odd number of digits. Returns length of binary data. */ + +static int +translate_hex_string(char *s, char *saved_orphan) +{ + int c1 = *saved_orphan; + char *start = s; + char *t = s; + for (; *s; s++) { + if (isspace(*s)) + continue; + if (c1) { + *t++ = (hexval(c1) << 4) + hexval(*s); + c1 = 0; + } else + c1 = *s; + } + *saved_orphan = c1; + return t - start; +} + +/* This function returns 1 if the string contains all '0's. */ + +static int +all_zeroes(char *s) +{ + if (*s == '\0' || *s == '\n') + return 0; + while (*s == '0') + s++; + return *s == '\0' || *s == '\n'; +} + +/* This function handles the entire file. */ + +#define LINESIZE 1024 + +void +process_pfa(FILE *ifp, const char *ifp_filename, struct font_reader *fr) +{ + /* Loop until no more input. We need to look for `currentfile eexec' to + start eexec section (hex to binary conversion) and line of all zeros to + switch back to ASCII. */ + + /* Don't use fgets() in case line-endings are indicated by bare \r's, as + occurs in Macintosh fonts. */ + + /* 2.Aug.1999 - At the behest of Tom Kacvinsky <tjk@ams.org>, support + binary PFA fonts. */ + + char buffer[LINESIZE]; + int c = 0; + int blocktyp = PFA_ASCII; + char saved_orphan = 0; + (void)ifp_filename; + + while (c != EOF) { + char *line = buffer, *last = buffer; + int crlf = 0; + c = getc(ifp); + while (c != EOF && c != '\r' && c != '\n' && last < buffer + LINESIZE - 1) { + *last++ = c; + c = getc(ifp); + } + + /* handle the end of the line */ + if (last == buffer + LINESIZE - 1) + /* buffer overrun: don't append newline even if we have it */ + ungetc(c, ifp); + else if (c == '\r' && blocktyp != PFA_BINARY) { + /* change CR or CR/LF into LF, unless reading binary data! (This + condition was wrong before, caused Thanh problems - + 6.Mar.2001) */ + c = getc(ifp); + if (c != '\n') + ungetc(c, ifp), crlf = 1; + else + crlf = 2; + *last++ = '\n'; + } else if (c != EOF) + *last++ = c; + + *last = 0; + + /* now that we have the line, handle it */ + if (blocktyp == PFA_ASCII) { + if (strncmp(line, "currentfile eexec", 17) == 0 && isspace(line[17])) { + char saved_p; + /* assert(line == buffer); */ + for (line += 18; isspace(*line); line++) + /* nada */; + saved_p = *line; + *line = 0; + fr->output_ascii(buffer, line - buffer); + *line = saved_p; + blocktyp = PFA_EEXEC_TEST; + if (!*line) + continue; + } else { + fr->output_ascii(line, last - line); + continue; + } + } + + /* check immediately after "currentfile eexec" for ASCII or binary */ + if (blocktyp == PFA_EEXEC_TEST) { + /* 8.Feb.2004: fix bug if first character in a binary eexec block + is 0, reported by Werner Lemberg */ + for (; line < last && isspace(*line); line++) + /* nada */; + if (line == last) + continue; + else if (last >= line + 4 && isxdigit(line[0]) && isxdigit(line[1]) + && isxdigit(line[2]) && isxdigit(line[3])) + blocktyp = PFA_HEX; + else + blocktyp = PFA_BINARY; + memmove(buffer, line, last - line + 1); + last = buffer + (last - line); + line = buffer; + /* patch up crlf fix */ + if (blocktyp == PFA_BINARY && crlf) { + last[-1] = '\r'; + if (crlf == 2) + *last++ = '\n'; + } + } + + /* blocktyp == PFA_HEX || blocktyp == PFA_BINARY */ + if (all_zeroes(line)) { /* XXX not safe */ + fr->output_ascii(line, last - line); + blocktyp = PFA_ASCII; + } else if (blocktyp == PFA_HEX) { + int len = translate_hex_string(line, &saved_orphan); + if (len) + fr->output_binary((unsigned char *)line, len); + } else + fr->output_binary((unsigned char *)line, last - line); + } + + fr->output_end(); +} + +/* Process a PFB file. */ + +/* XXX Doesn't handle "currentfile eexec" as intelligently as process_pfa + does. */ + +static int +handle_pfb_ascii(struct font_reader *fr, char *line, int len) +{ + /* Divide PFB_ASCII blocks into lines */ + int start = 0; + + while (1) { + int pos = start; + + while (pos < len && line[pos] != '\n' && line[pos] != '\r') + pos++; + + if (pos >= len) { + if (pos == start) + return 0; + else if (start == 0 && pos == LINESIZE - 1) { + line[pos] = 0; + fr->output_ascii(line, pos); + return 0; + } else { + memmove(line, line + start, pos - start); + return pos - start; + } + + } else if (pos < len - 1 && line[pos] == '\r' && line[pos+1] == '\n') { + line[pos] = '\n'; + line[pos+1] = 0; + fr->output_ascii(line + start, pos + 1 - start); + start = pos + 2; + + } else { + char save = line[pos+1]; + line[pos] = '\n'; + line[pos+1] = 0; + fr->output_ascii(line + start, pos + 1 - start); + line[pos+1] = save; + start = pos + 1; + } + } +} + + +void +process_pfb(FILE *ifp, const char *ifp_filename, struct font_reader *fr) +{ + int blocktyp = 0; + int block_len = 0; + int c = 0; + int filepos = 0; + int linepos = 0; + char line[LINESIZE]; + + while (1) { + while (block_len == 0) { + c = getc(ifp); + blocktyp = getc(ifp); + if (c != PFB_MARKER + || (blocktyp != PFB_ASCII && blocktyp != PFB_BINARY + && blocktyp != PFB_DONE)) { + if (c == EOF || blocktyp == EOF) + error("%s corrupted: no end-of-file marker", ifp_filename); + else + error("%s corrupted: bad block marker at position %d", + ifp_filename, filepos); + blocktyp = PFB_DONE; + } + if (blocktyp == PFB_DONE) + goto done; + + block_len = getc(ifp) & 0xFF; + block_len |= (getc(ifp) & 0xFF) << 8; + block_len |= (getc(ifp) & 0xFF) << 16; + block_len |= (getc(ifp) & 0xFF) << 24; + if (feof(ifp)) { + error("%s corrupted: bad block length at position %d", + ifp_filename, filepos); + blocktyp = PFB_DONE; + goto done; + } + filepos += 6; + } + + /* read the block in its entirety, in LINESIZE chunks */ + while (block_len > 0) { + int rest = LINESIZE - 1 - linepos; /* leave space for '\0' */ + int n = (block_len > rest ? rest : block_len); + int actual = fread(line + linepos, 1, n, ifp); + if (actual != n) { + error("%s corrupted: block short by %d bytes at position %d", + ifp_filename, block_len - actual, filepos); + block_len = actual; + } + + if (blocktyp == PFB_BINARY) + fr->output_binary((unsigned char *)line, actual); + else + linepos = handle_pfb_ascii(fr, line, linepos + actual); + + block_len -= actual; + filepos += actual; + } + + /* handle any leftover line */ + if (linepos > 0) { + line[linepos] = 0; + fr->output_ascii(line, linepos); + linepos = 0; + } + } + + done: + c = getc(ifp); + if (c != EOF) + error("%s corrupted: data after PFB end marker at position %d", + ifp_filename, filepos - 2); + fr->output_end(); +} + + +#define DEFAULT_BLOCKLEN (1L<<12) + +void +init_pfb_writer(struct pfb_writer *w, int blocklen, FILE *f) +{ + w->len = DEFAULT_BLOCKLEN; + w->buf = (unsigned char *)malloc(w->len); + if (!w->buf) + fatal_error("out of memory"); + w->max_len = (blocklen <= 0 ? 0xFFFFFFFFU : (unsigned)blocklen); + w->pos = 0; + w->blocktyp = PFB_ASCII; + w->binary_blocks_written = 0; + w->f = f; +} + +void +pfb_writer_output_block(struct pfb_writer *w) +{ + /* do nothing if nothing in block */ + if (w->pos == 0) + return; + + /* output four-byte block length */ + putc(PFB_MARKER, w->f); + putc(w->blocktyp, w->f); + putc((int)(w->pos & 0xff), w->f); + putc((int)((w->pos >> 8) & 0xff), w->f); + putc((int)((w->pos >> 16) & 0xff), w->f); + putc((int)((w->pos >> 24) & 0xff), w->f); + + /* output block data */ + fwrite(w->buf, 1, w->pos, w->f); + + /* mark block buffer empty and uninitialized */ + w->pos = 0; + if (w->blocktyp == PFB_BINARY) + w->binary_blocks_written++; +} + +void +pfb_writer_grow_buf(struct pfb_writer *w) +{ + if (w->len < w->max_len) { + /* grow w->buf */ + unsigned new_len = w->len * 2; + unsigned char *new_buf; + if (new_len > w->max_len) + new_len = w->max_len; + new_buf = (unsigned char *)malloc(new_len); + if (!new_buf) { + error("out of memory; continuing with a smaller block size"); + w->max_len = w->len; + pfb_writer_output_block(w); + } else { + memcpy(new_buf, w->buf, w->len); + free(w->buf); + w->buf = new_buf; + w->len = new_len; + } + + } else + /* buf already the right size, just output the block */ + pfb_writer_output_block(w); +} + +void +pfb_writer_end(struct pfb_writer *w) +{ + if (w->pos) + pfb_writer_output_block(w); + putc(PFB_MARKER, w->f); + putc(PFB_DONE, w->f); +} + +/* This CRC table and routine were borrowed from macutils-2.0b3 */ + +static unsigned short crctab[256] = { + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7, + 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6, + 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485, + 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4, + 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC, + 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B, + 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12, + 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A, + 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41, + 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49, + 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70, + 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78, + 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F, + 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E, + 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D, + 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C, + 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3, + 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A, + 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92, + 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9, + 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1, + 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8, + 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0, +}; + +/* + * Update a CRC check on the given buffer. + */ + +int +crcbuf(int crc, unsigned int len, const char *buf) +{ + const unsigned char *ubuf = (const unsigned char *)buf; + while (len--) + crc = ((crc << 8) & 0xFF00) ^ crctab[((crc >> 8) & 0xFF) ^ *ubuf++]; + return crc; +} + +#ifdef __cplusplus +} +#endif diff --git a/Build/source/utils/t1utils/t1lib.h b/Build/source/utils/t1utils/t1lib.h new file mode 100644 index 00000000000..7100eb37c97 --- /dev/null +++ b/Build/source/utils/t1utils/t1lib.h @@ -0,0 +1,49 @@ +#ifndef T1LIB_H +#define T1LIB_H +#ifdef __cplusplus +extern "C" { +#endif + +#define PFB_MARKER 128 +#define PFB_ASCII 1 +#define PFB_BINARY 2 +#define PFB_DONE 3 + +struct font_reader { + void (*output_ascii)(char *, int); + void (*output_binary)(unsigned char *, int); + void (*output_end)(); +}; + +void process_pfa(FILE *, const char *filename, struct font_reader *); +void process_pfb(FILE *, const char *filename, struct font_reader *); + +struct pfb_writer { + unsigned char *buf; + unsigned len; + unsigned max_len; + unsigned pos; + int blocktyp; + int binary_blocks_written; + FILE *f; +}; + +void init_pfb_writer(struct pfb_writer *, int, FILE *); +void pfb_writer_output_block(struct pfb_writer *); +void pfb_writer_grow_buf(struct pfb_writer *); +void pfb_writer_end(struct pfb_writer *); +#define PFB_OUTPUT_BYTE(w, b) do { \ + if ((w)->pos >= (w)->len) pfb_writer_grow_buf(w); \ + (w)->buf[(w)->pos++] = (b); \ + } while (0) + +int crcbuf(int crc, unsigned int len, const char *buf); + +/* whoever uses this code must provide a definition for these functions */ +extern void error(const char *, ...); +extern void fatal_error(const char *, ...); + +#ifdef __cplusplus +} +#endif +#endif diff --git a/Build/source/utils/t1utils/t1mac.1 b/Build/source/utils/t1utils/t1mac.1 new file mode 100644 index 00000000000..63a196da720 --- /dev/null +++ b/Build/source/utils/t1utils/t1mac.1 @@ -0,0 +1,62 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1MAC 1 "" "Version \*V" +.SH NAME +t1mac \- translate a PFA or PFB PostScript Type 1 font into Macintosh format +.SH SYNOPSIS +.B t1mac +\%[\fB\-\-macbinary\fR | \fB\-\-applesingle\fR | +\fB\-\-appledouble\fR | \fB\-\-binhex\fR | \fB\-\-raw\fR] +\%[\fB\-\-filename\fR \fIname\fR] +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.B t1mac +reads a PFA (hexadecimal) or PFB (binary) PostScript Type 1 font file and +generates an equivalent Macintosh Type 1 font file. The output file can be +in MacBinary II, AppleSingle, AppleDouble, or BinHex format, or it can be a +raw resource fork. The default is MacBinary II; use an option to choose a +different format. If the +.I output +file is not specified output goes to the standard output. +.PP +WARNING: The output of +.B t1mac +is not sufficient to use the font, since Macintoshes can't read raw Type 1 +fonts. You will need to create a font suitcase containing bitmap fonts if +you do not have such a suitcase for the font already. +.B t1mac +cannot help you do this. +.SH OPTIONS +.TP 5 +.BR \-\-raw ", " \-r +Indicates that output should be a raw resource fork. +.TP 5 +.BR \-\-macbinary +Indicates that output should be in MacBinary I or II format. This is the +default. +.TP 5 +.BR \-\-applesingle +Indicates that output should be in AppleSingle format. +.TP 5 +.BR \-\-appledouble +Indicates that output should be in AppleDouble format. +.TP 5 +.BR \-\-binhex +Indicates that output should be in BinHex 4.0 format. +.TP 5 +.BR \-\-filename "=\fIname\fR, " \-n " \fIname\fR" +Sets the Macintosh filename of the output font to \fIname\fR. The default +is to construct the filename from the font's name using established +Macintosh conventions. This option is not useful when output is a raw +resource fork. +.SH "SEE ALSO" +.LP +.M t1unmac 1 , +.M t1ascii 1 , +.M t1binary 1 , +.M t1asm 1 , +.M t1disasm 1 +.SH AUTHORS +Eddie Kohler (kohler@icir.org) diff --git a/Build/source/utils/t1utils/t1mac.c b/Build/source/utils/t1utils/t1mac.c new file mode 100644 index 00000000000..c7c62b2d2b3 --- /dev/null +++ b/Build/source/utils/t1utils/t1mac.c @@ -0,0 +1,1022 @@ +/* t1mac + * + * This program converts Type 1 fonts in PFA or PFB format into Macintosh Type + * 1 fonts stored in MacBinary (I or II), AppleSingle, AppleDouble, BinHex, or + * raw resource fork format. + * + * Copyright (c) 2000-2003 by Eddie Kohler, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <ctype.h> +#include <limits.h> +#include <stdarg.h> +#include <errno.h> +#include <time.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef unsigned char byte; + +void fatal_error(const char *message, ...); +void error(const char *message, ...); + +/* resource fork layout */ +#define RFORK_HEADERLEN 256 +#define RFORK_MAP_RESERVEDLEN 22 +#define RFORK_MAP_HEADERLEN 28 +#define RFORK_RTYPE_LEN 8 +#define RFORK_RSRC_LEN 12 + +/* Macintosh times are # seconds since 1/1/1904, not 1/1/1970 */ +#define MAC_TIME_DELTA 2082844800 + +/* POST resource information */ +#define POST_ASCII 1 +#define POST_BINARY 2 +#define POST_END 5 + +/* Adobe font file information */ +#define T1_FILETYPE 0x4C57464E /* LWFN */ +#define T1_FILECREATOR 0x54315554 /* T1UT */ +#define T1_FINDERFLAGS 33 /* Bundle + Inited */ + +#define MAX_RSRC_LEN 2048 +static byte rbuf[MAX_RSRC_LEN]; +static int rbufpos; +static int blocktyp; + +static char *font_name; + +/* information about the resources being built */ +typedef struct Rsrc { + int32_t type; + int id; + int attrs; + int data_offset; + uint32_t data_len; + int next_in_type; + int next_type; +} Rsrc; +static Rsrc *rsrc = 0; +static int nrsrc = 0; +static int rsrc_cap = 0; +static int cur_post_id = 0; + +/* output resource fork */ +static FILE *rfork_f = 0; + +/* ICN# data */ +static const unsigned char icon_bw_data[] = { +0,0,0,0,255,255,255,255,128,0,0,1,128,0,0,1,128,0,0,1, +128,0,0,1,128,0,0,1,128,0,0,1,128,0,0,1,128,0,0,33, +128,0,0,97,128,0,0,225,128,0,1,225,128,0,3,225,128,0,7,225, +128,0,15,225,128,0,31,225,128,0,55,225,159,128,103,249,144,128,199,9, +240,129,135,15,0,131,7,0,0,134,7,0,15,140,7,240,8,31,255,240, +8,63,255,240,8,96,7,240,8,192,7,240,9,192,15,240,11,224,31,240, +15,240,63,240,15,255,255,240,0,0,0,0,255,255,255,255,255,255,255,255, +255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, +255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, +255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, +255,255,255,255,240,255,255,15,240,255,255,15,0,255,255,0,0,255,255,0, +15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240, +15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240,}; + +static const unsigned char small_icon_bw_data[] = { +255,255,128,1,128,1,128,1,128,5,128,13,128,29,128,61,128,125,184,253, +201,179,59,60,39,252,44,60,60,124,63,252,255,255,255,255,255,255,255,255, +255,255,255,255,255,255,255,255,255,255,255,255,207,243,63,252,63,252,63,252, +63,252,63,252,}; + +static const unsigned char icon_8_data[] = { +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,92,92,92,92,105, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,5,5,92, +92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,5,5,5,5,92,92,92,92,105,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,5, +5,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,92,92,92,92,105, +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +5,5,5,5,5,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,5,5,92, +92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,5,5,92,5,5,5,5,5,5,92,92,92,92,105,92,92,92,105, +105,105,105,105,92,92,92,92,92,92,92,92,92,5,5,92,92,5,5,105, +105,105,105,105,92,92,92,105,92,92,92,105,0,0,0,0,92,92,92,92, +92,92,92,92,5,5,92,92,92,5,5,105,0,0,0,0,92,92,92,105, +105,105,105,105,0,0,0,0,92,92,92,92,92,92,92,5,5,92,92,92, +92,5,5,105,0,0,0,0,105,105,105,105,0,0,0,0,0,0,0,0, +92,92,92,92,92,92,5,5,92,92,92,92,92,5,5,105,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,92,92,92,92,92,5,5,92, +92,92,92,92,92,5,5,105,0,0,0,0,0,0,0,0,0,0,0,0, +92,92,92,92,92,92,92,92,5,5,92,92,92,92,92,92,92,5,5,5, +5,5,5,92,0,0,0,0,0,0,0,0,92,92,92,92,92,92,92,5, +5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,105,0,0,0,0, +0,0,0,0,92,92,92,92,92,92,5,5,5,5,5,5,5,5,5,5, +5,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0,92,92,92,92, +92,5,5,92,92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,105, +0,0,0,0,0,0,0,0,92,92,92,92,5,5,92,92,92,92,92,92, +92,92,92,92,92,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0, +92,92,92,5,5,5,92,92,92,92,92,92,92,92,92,92,5,5,5,5, +5,5,5,105,0,0,0,0,0,0,0,0,92,92,5,5,5,5,5,92, +92,92,92,92,92,92,92,5,5,5,5,5,5,5,5,105,0,0,0,0, +0,0,0,0,92,5,5,5,5,5,5,5,92,92,92,92,92,92,5,5, +5,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0,92,105,105,105, +105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105, +0,0,0,0,}; + +static const unsigned char small_icon_8_data[] = { +92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92, +92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, +92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,5,92,105, +92,92,92,92,92,92,92,92,92,92,92,92,5,5,92,105,92,92,92,92, +92,92,92,92,92,92,92,5,5,5,92,105,92,92,92,92,92,92,92,92, +92,92,5,5,5,5,92,105,92,92,92,92,92,92,92,92,92,5,92,5, +5,5,92,105,92,105,105,105,92,92,92,92,5,92,92,5,105,105,92,105, +92,105,0,0,92,92,92,5,92,92,92,5,0,0,105,105,0,0,92,92, +92,92,5,92,92,92,92,5,5,5,0,0,0,0,92,92,92,5,5,5, +5,5,5,5,5,5,0,0,0,0,92,92,5,92,92,92,92,92,92,5, +5,5,0,0,0,0,92,5,5,92,92,92,92,92,5,5,5,5,0,0, +0,0,5,5,5,5,105,105,105,5,5,5,5,5,0,0,}; + +static const unsigned char icon_4_data[] = { +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,69,69,69,69, +69,69,69,69,69,69,69,69,69,69,69,69,84,84,84,84,84,84,84,84, +84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69,69,69,69,69, +69,69,69,69,84,84,84,84,84,84,84,84,84,84,84,84,84,84,84,85, +69,69,69,69,69,69,69,69,69,69,69,69,69,69,69,69,84,84,84,84, +84,84,84,84,84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69, +69,69,69,69,69,69,69,69,84,84,84,84,84,84,84,84,84,84,84,84, +84,84,84,85,69,69,69,69,69,69,69,69,69,69,69,69,69,21,69,69, +84,84,84,84,84,84,84,84,84,84,84,84,81,20,84,85,69,69,69,69, +69,69,69,69,69,69,69,69,17,21,69,69,84,84,84,84,84,84,84,84, +84,84,84,81,17,20,84,85,69,69,69,69,69,69,69,69,69,69,69,17, +17,21,69,69,84,84,84,84,84,84,84,84,84,84,81,17,17,20,84,85, +69,69,69,69,69,69,69,69,69,69,17,17,17,21,69,69,84,84,84,84, +84,84,84,84,84,81,17,17,17,20,84,85,69,69,69,69,69,69,69,69, +69,17,65,17,17,21,69,69,84,85,85,85,84,84,84,84,81,20,81,21, +85,85,84,85,69,69,0,0,69,69,69,69,17,69,65,21,0,0,69,69, +85,85,0,0,84,84,84,81,20,84,81,21,0,0,85,85,0,0,0,0, +69,69,69,17,69,69,65,21,0,0,0,0,0,0,0,0,84,84,81,20, +84,84,81,21,0,0,0,0,0,0,69,69,69,69,17,69,69,69,65,17, +17,30,0,0,0,0,84,84,84,81,17,17,17,17,17,17,17,21,0,0, +0,0,69,69,69,17,17,17,17,17,17,17,17,21,0,0,0,0,84,84, +81,20,84,84,84,84,81,17,17,21,0,0,0,0,69,69,17,69,69,69, +69,69,65,17,17,21,0,0,0,0,84,81,17,84,84,84,84,84,17,17, +17,21,0,0,0,0,69,17,17,21,69,69,69,65,17,17,17,21,0,0, +0,0,81,17,17,17,84,84,84,17,17,17,17,21,0,0,0,0,229,85, +85,85,85,85,85,85,85,85,85,85,0,0,}; + +static const unsigned char small_icon_4_data[] = { +84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69,84,84,84,84, +84,84,84,85,69,69,69,69,69,69,69,69,84,84,84,84,84,84,81,85, +69,69,69,69,69,69,17,69,84,84,84,84,84,81,17,85,69,69,69,69, +69,17,17,69,84,84,84,84,81,81,17,85,69,85,69,69,21,65,85,69, +85,0,84,81,84,81,0,85,0,69,69,21,69,65,17,0,0,84,81,17, +17,17,17,0,0,69,21,69,69,65,17,0,0,81,20,84,84,17,17,0, +0,17,17,85,81,17,17,0,}; + + +/* fseek with fatal_error */ + +static void +reposition(FILE *fi, int32_t absolute) +{ + if (fseek(fi, absolute, 0) == -1) + fatal_error("can't seek to position %d", absolute); +} + +/* Some functions to write one, two, three, and four byte integers in 68000 + byte order (most significant byte first). */ + +static void +write_one(int c, FILE *f) +{ + putc(c, f); +} + +static void +write_two(int c, FILE *f) +{ + putc((c >> 8) & 255, f); + putc(c & 255, f); +} + +static void +write_three(int32_t c, FILE *f) +{ + putc((c >> 16) & 255, f); + putc((c >> 8) & 255, f); + putc(c & 255, f); +} + +static void +write_four(int32_t c, FILE *f) +{ + putc((c >> 24) & 255, f); + putc((c >> 16) & 255, f); + putc((c >> 8) & 255, f); + putc(c & 255, f); +} + +/* Some functions to store one, two, three, and four byte integers in 68000 + byte order (most significant byte first). */ + +static void +store_one(int c, char *s) +{ + s[0] = (char)(c & 255); +} + +static void +store_two(int c, char *s) +{ + s[0] = (char)((c >> 8) & 255); + s[1] = (char)(c & 255); +} + +static void +store_four(int32_t c, char *s) +{ + s[0] = (char)((c >> 24) & 255); + s[1] = (char)((c >> 16) & 255); + s[2] = (char)((c >> 8) & 255); + s[3] = (char)(c & 255); +} + +static void +output_new_rsrc(const char *rtype, int rid, int attrs, + const char *data, uint32_t len) +{ + Rsrc *r; + if (nrsrc >= rsrc_cap) { + rsrc_cap = (rsrc_cap ? rsrc_cap * 2 : 256); + r = (Rsrc *)malloc(sizeof(Rsrc) * rsrc_cap); + if (!r) + fatal_error("out of memory"); + memcpy(r, rsrc, sizeof(Rsrc) * nrsrc); + free(rsrc); + rsrc = r; + } + r = &rsrc[nrsrc]; + nrsrc++; + + /* prepare resource record */ + { + const unsigned char *b = (const unsigned char *)rtype; + r->type = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; + } + r->id = rid; + r->attrs = attrs; + if (nrsrc == 1) + r->data_offset = 0; + else + r->data_offset = rsrc[nrsrc-2].data_offset + rsrc[nrsrc-2].data_len + 4; + r->data_len = len; + r->next_in_type = r->next_type = -2; + + /* resource consists of length, then data */ + write_four(r->data_len, rfork_f); + fwrite(data, 1, len, rfork_f); +} + +static void +init_current_post(void) +{ + rbufpos = 2; + cur_post_id = 501; + blocktyp = POST_ASCII; +} + +static void +output_current_post(void) +{ + if (blocktyp != POST_END && rbufpos <= 2) + return; + rbuf[0] = blocktyp; + rbuf[1] = 0; + output_new_rsrc("POST", cur_post_id, 0, (char *)rbuf, rbufpos); + rbufpos = 2; + cur_post_id++; +} + +/* font_reader functions */ + +static void +t1mac_output_data(byte *s, int len) +{ + while (len > 0) { + int n; + /* In some Mac fonts, the ASCII sections terminate with a line-end */ + if (rbufpos >= MAX_RSRC_LEN + || (blocktyp == POST_ASCII && len + rbufpos > MAX_RSRC_LEN && rbufpos)) + output_current_post(); + n = (len + rbufpos <= MAX_RSRC_LEN ? len : MAX_RSRC_LEN - rbufpos); + memcpy(rbuf + rbufpos, s, n); + rbufpos += n; + s += n; + len -= n; + } +} + +static void +t1mac_output_ascii(char *s, int len) +{ + if (blocktyp == POST_BINARY) { + output_current_post(); + blocktyp = POST_ASCII; + } + /* Mac line endings */ + if (len > 0 && s[len-1] == '\n') + s[len-1] = '\r'; + t1mac_output_data((byte *)s, len); + if (strncmp(s, "/FontName", 9) == 0) { + for (s += 9; isspace(*s); s++) ; + if (*s == '/') { + const char *t = ++s; + while (*t && !isspace(*t)) t++; + free(font_name); + font_name = (char *)malloc(t - s + 1); + memcpy(font_name, s, t - s); + font_name[t - s] = 0; + } + } +} + +static void +t1mac_output_binary(unsigned char *s, int len) +{ + if (blocktyp == POST_ASCII) { + output_current_post(); + blocktyp = POST_BINARY; + } + t1mac_output_data(s, len); +} + +static void +t1mac_output_end(void) +{ + output_current_post(); + blocktyp = POST_END; + output_current_post(); +} + + +/* finish off the resource fork */ + +static uint32_t +complete_rfork(void) +{ + uint32_t reflist_offset, total_data_len; + uint32_t typelist_len; + int i, j, ntypes; + + /* analyze resources */ + { + int last_type = -1; + ntypes = 0; + for (i = 0; i < nrsrc; i++) + if (rsrc[i].next_in_type == -2) { + int last = -1; + if (last_type >= 0) + rsrc[last_type].next_type = i; + for (j = i; j < nrsrc; j++) + if (rsrc[j].type == rsrc[i].type) { + if (last >= 0) + rsrc[last].next_in_type = j; + last = j; + } + rsrc[last].next_in_type = -1; + last_type = i; + ntypes++; + } + } + + /* have just finished writing data */ + /* now write resource map */ + for (i = 0; i < RFORK_MAP_RESERVEDLEN; i++) + putc(0, rfork_f); /* reserved */ + write_two(0, rfork_f); /* resource fork attributes */ + typelist_len = ntypes * RFORK_RTYPE_LEN + 2; + write_two(RFORK_MAP_HEADERLEN, rfork_f); /* offset from start of map to typelist */ + write_two(RFORK_MAP_HEADERLEN + typelist_len + nrsrc * RFORK_RSRC_LEN, rfork_f); /* offset from start of map to namelist */ + + /* output type map */ + write_two(ntypes - 1, rfork_f);/* number of types - 1 */ + reflist_offset = typelist_len; + for (i = 0; i >= 0; i = rsrc[i].next_type) { + int n_in_type = 0; + for (j = i; j >= 0; j = rsrc[j].next_in_type) + n_in_type++; + write_four(rsrc[i].type, rfork_f); /* resource type */ + write_two(n_in_type - 1, rfork_f); /* number in type - 1 */ + write_two(reflist_offset, rfork_f); /* offset to reflist from start of typelist */ + reflist_offset += n_in_type * RFORK_RSRC_LEN; + } + + /* output reference list */ + for (i = 0; i >= 0; i = rsrc[i].next_type) + for (j = i; j >= 0; j = rsrc[j].next_in_type) { + write_two(rsrc[j].id, rfork_f); /* ID */ + write_two(-1, rfork_f); /* offset to name */ + write_one(rsrc[j].attrs, rfork_f); /* attributes */ + write_three(rsrc[j].data_offset, rfork_f); /* offset to data from start of data */ + write_four(0, rfork_f); /* reserved */ + } + + /* finally, patch up resource fork header */ + { + total_data_len = rsrc[nrsrc-1].data_offset + rsrc[nrsrc-1].data_len + 4; + reposition(rfork_f, 0); + write_four(RFORK_HEADERLEN, rfork_f); /* offset from rfork to data */ + write_four(RFORK_HEADERLEN + total_data_len, rfork_f); /* offset from rfork to map */ + write_four(total_data_len, rfork_f); /* length of data */ + write_four(RFORK_MAP_HEADERLEN + reflist_offset, rfork_f); /* length of map */ + } + + return RFORK_HEADERLEN + total_data_len + RFORK_MAP_HEADERLEN + reflist_offset; +} + + +/* write a MacBinary II file */ + +static void +output_raw(FILE *rf, int32_t len, FILE *f) +{ + char buf[2048]; + reposition(rf, 0); + while (len > 0) { + int n = (len < 2048 ? len : 2048); + fread(buf, 1, n, rf); + fwrite(buf, 1, n, f); + len -= n; + } +} + +static void +output_macbinary(FILE *rf, int32_t rf_len, const char *filename, FILE *f) +{ + int i, len = strlen(filename); + char buf[128]; + if (len < 1 || len > 63) + fatal_error("filename length must be between 1 and 63"); + store_one(0, buf+0); /* old version number */ + store_one(len, buf+1); /* filename length */ + memset(buf+2, 0, 63); /* filename padding */ + memcpy(buf+2, filename, len); /* filename */ + store_four(T1_FILETYPE, buf+65); /* file type */ + store_four(T1_FILECREATOR, buf+69); /* file creator */ + store_one(T1_FINDERFLAGS, buf+73); /* finder flags */ + store_one(0, buf+74); /* zero byte */ + store_two(0, buf+75); /* vertical position in window */ + store_two(0, buf+77); /* horizontal position in window */ + store_two(0, buf+79); /* window or folder ID */ + store_one(0, buf+81); /* protected flag */ + store_one(0, buf+82); /* zero byte */ + store_four(0, buf+83); /* data fork length */ + store_four(rf_len, buf+87); /* resource fork length */ + { + time_t t = time(0) + MAC_TIME_DELTA; + store_four(t, buf+91); /* creation date */ + store_four(t, buf+95); /* modification date */ + } + store_two(0, buf+99); /* GetInfo comment length */ + store_one(0, buf+101); /* finder flags part 2 */ + memset(buf+102, 0, 116 - 102); /* padding */ + store_four(0, buf+116); /* total length when unpacked */ + store_two(0, buf+120); /* length of secondary header */ + store_one(129, buf+122); /* version number */ + store_one(129, buf+123); /* minimum acceptable version number */ + store_two(crcbuf(0, 124, buf), buf+124); /* CRC */ + store_two(0, buf+126); /* padding to 128 bytes */ + + /* write out the header */ + fwrite(buf, 1, 128, f); + + /* now write resource fork */ + output_raw(rf, rf_len, f); + for (i = rf_len % 128; i && i < 128; i++) + putc(0, f); +} + + +/* write an AppleSingle file */ + +#define APPLESINGLE_MAGIC 0x00051600 +#define APPLEDOUBLE_MAGIC 0x00051607 +#define APPLESINGLE_VERSION 0x00020000 +#define APPLESINGLE_TIME_DELTA 883612800 +#define APPLESINGLE_HEADERLEN 26 +#define APPLESINGLE_ENTRYLEN 12 +#define APPLESINGLE_DFORK_ENTRY 1 +#define APPLESINGLE_RFORK_ENTRY 2 +#define APPLESINGLE_DATES_ENTRY 8 +#define APPLESINGLE_DATES_LEN 16 +#define APPLESINGLE_FINDERINFO_ENTRY 9 +#define APPLESINGLE_FINDERINFO_LEN 32 +#define APPLESINGLE_REALNAME_ENTRY 3 + +static void +output_applesingle(FILE *rf, int32_t rf_len, const char *filename, FILE *f, + int appledouble) +{ + uint32_t offset; + int i, nentries, len = strlen(filename); + if (appledouble) /* magic number */ + write_four(APPLEDOUBLE_MAGIC, f); + else + write_four(APPLESINGLE_MAGIC, f); + write_four(APPLESINGLE_VERSION, f); /* version number */ + for (i = 0; i < 4; i++) + write_four(0, f); /* filler */ + nentries = (appledouble ? 4 : 5); + write_two(nentries, f); /* number of entries */ + + /* real name entry */ + offset = APPLESINGLE_HEADERLEN + nentries * APPLESINGLE_ENTRYLEN; + write_four(APPLESINGLE_REALNAME_ENTRY, f); + write_four(offset, f); + write_four(len, f); + offset += len; + + /* time entry */ + write_four(APPLESINGLE_DATES_ENTRY, f); + write_four(offset, f); + write_four(APPLESINGLE_DATES_LEN, f); + offset += APPLESINGLE_DATES_LEN; + + /* finder info entry */ + write_four(APPLESINGLE_FINDERINFO_ENTRY, f); + write_four(offset, f); + write_four(APPLESINGLE_FINDERINFO_LEN, f); + offset += APPLESINGLE_FINDERINFO_LEN; + + /* resource fork entry */ + write_four(APPLESINGLE_RFORK_ENTRY, f); + write_four(offset, f); + write_four(rf_len, f); + offset += rf_len; + + /* data fork entry */ + if (!appledouble) { + write_four(APPLESINGLE_DFORK_ENTRY, f); + write_four(offset, f); + write_four(0, f); + } + + /* real name data */ + fwrite(filename, 1, len, f); + + /* time data */ + i = time(0) - APPLESINGLE_TIME_DELTA; + write_four(i, f); /* creation date */ + write_four(i, f); /* modification date */ + write_four(0x80000000, f); /* backup date */ + write_four(0, f); /* access date */ + + /* finder info data */ + write_four(T1_FILETYPE, f); /* file type */ + write_four(T1_FILECREATOR, f); /* file creator */ + write_one(T1_FINDERFLAGS, f); /* finder flags */ + write_one(0, f); /* extended finder flags */ + write_two(0, f); /* vertical position in window */ + write_two(0, f); /* horizontal position in window */ + write_two(0, f); /* window or folder ID */ + write_four(0, f); /* icon ID and reserved */ + write_four(0, f); /* reserved */ + write_one(0, f); /* script flag */ + write_one(0, f); /* reserved */ + write_two(0, f); /* comment ID */ + write_four(0, f); /* put away */ + + /* resource fork data */ + output_raw(rf, rf_len, f); +} + + +/* write a BinHex file */ + +static void +binhex_buffer(const byte *s, int len, FILE *f) +{ + static int col = 1; + static int bits = 0; + static int bitspos = 2; + static const char *table = "!\"#$%&'()*+,-012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr"; + byte buf[5]; + int c, i, left; + + if (!s && bitspos > 2) { /* output the remaining bits */ + s = (const byte *)"\0"; + len = 1; + } + + for (left = len; left > 0; left--, s++) { + int pos; + if (s[0] == 0x90) { + buf[0] = 0x90; + buf[1] = 0x00; + pos = 2; + } else { + buf[0] = s[0]; + pos = 1; + } + + /* find a run */ + if (left > 2 && s[0] == s[1] && s[0] == s[2]) { + for (i = 3; i < left && i < 255; i++) + if (s[i] != s[0]) + break; + buf[pos] = 0x90; + buf[pos+1] = i; + pos += 2; + s += i - 1; + left -= i - 1; + } + + /* store those characters */ + for (i = 0; i < pos; i++) { + bits |= buf[i]; + while (bitspos >= 0) { + c = (bits >> bitspos) & 0x3F; + putc(table[c], f); + if (++col == 63) { + putc('\n', f); + col = 0; + } + bitspos -= 6; + } + bits <<= 8; + bitspos += 8; + } + } +} + +static void +output_binhex(FILE *rf, int32_t rf_len, const char *filename, FILE *f) +{ + int crc, len = strlen(filename); + char buf[2048]; + + if (len < 1 || len > 63) + fatal_error("filename length must be between 1 and 63"); + store_one(len, buf+0); /* filename length */ + memcpy(buf+1, filename, len); /* filename */ + store_one(0, buf+1+len); /* version */ + store_four(T1_FILETYPE, buf+2+len); /* file type */ + store_four(T1_FILECREATOR, buf+6+len); /* file creator */ + store_one(T1_FINDERFLAGS, buf+10+len); /* finder flags */ + store_one(0, buf+11+len); /* extended finder flags */ + store_four(0, buf+12+len); /* length of data fork */ + store_four(rf_len, buf+16+len); /* length of resource fork */ + store_two(crcbuf(0, 20+len, buf), buf+20+len); /* CRC */ + store_two(0, buf+22+len); /* data fork CRC */ + + /* output BinHex comment */ + fputs("(This file must be converted with BinHex 4.0)\n:", f); + + /* BinHex the header */ + binhex_buffer((const byte *)buf, 24+len, f); + + /* resource fork data */ + reposition(rf, 0); + crc = 0; + while (rf_len > 0) { + int n = (rf_len < 2048 ? rf_len : 2048); + fread(buf, 1, n, rf); + crc = crcbuf(crc, n, buf); /* update CRC */ + binhex_buffer((const byte *)buf, n, f); + rf_len -= n; + } + store_two(crc, buf); /* resource fork CRC */ + binhex_buffer((const byte *)buf, 2, f); + binhex_buffer(0, 0, f); /* get rid of any remaining bits */ + fputs(":\n", f); /* trailer */ +} + + +/***** + * command line + **/ + +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 +#define MACBINARY_OPT 304 +#define RAW_OPT 305 +#define APPLESINGLE_OPT 306 +#define APPLEDOUBLE_OPT 307 +#define BINHEX_OPT 308 +#define FILENAME_OPT 309 + +static Clp_Option options[] = { + { "appledouble", 0, APPLEDOUBLE_OPT, 0, 0 }, + { "applesingle", 0, APPLESINGLE_OPT, 0, 0 }, + { "binhex", 0, BINHEX_OPT, 0, 0 }, + { "help", 0, HELP_OPT, 0, 0 }, + { "macbinary", 0, MACBINARY_OPT, 0, 0 }, + { "filename", 'n', FILENAME_OPT, Clp_ArgString, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "raw", 'r', RAW_OPT, 0, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, +}; +static const char *program_name; + + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); +} + + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + + +void +usage(void) +{ + printf("\ +`T1mac' translates a PostScript Type 1 font from PFA or PFB format into\n\ +Macintosh Type 1 format. The result can be written in MacBinary II format (the\n\ +default), AppleSingle format, AppleDouble format, or BinHex format, or as a\n\ +raw resource fork. It is sent to the standard output unless an OUTPUT file is\n\ +given.\n\ +\n\ +Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ +\n\ +Options:\n\ + -r, --raw Output is a raw Macintosh resource fork.\n\ + --macbinary Output is in MacBinary format (default).\n\ + --applesingle Output is in AppleSingle format.\n\ + --appledouble Output is in AppleDouble format.\n\ + --binhex Output is in BinHex format.\n\ + -n, --filename NAME Macintosh font filename will be NAME.\n\ + -o, --output FILE Write output to FILE.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + +#ifdef __cplusplus +} +#endif + + +int +main(int argc, char *argv[]) +{ + int i, c; + FILE *ifp = 0, *ofp = 0; + const char *ifp_filename = "<stdin>"; + const char *ofp_filename = "<stdout>"; + const char *set_font_name = 0; + struct font_reader fr; + uint32_t rfork_len; + int raw = 0, macbinary = 1, applesingle = 0, appledouble = 0, binhex = 0; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + case RAW_OPT: + raw = 1; + macbinary = applesingle = appledouble = binhex = 0; + break; + + case MACBINARY_OPT: + macbinary = 1; + raw = applesingle = appledouble = binhex = 0; + break; + + case APPLESINGLE_OPT: + applesingle = 1; + raw = macbinary = appledouble = binhex = 0; + break; + + case APPLEDOUBLE_OPT: + appledouble = 1; + raw = macbinary = applesingle = binhex = 0; + break; + + case BINHEX_OPT: + binhex = 1; + raw = macbinary = applesingle = appledouble = 0; + break; + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp_filename = clp->arg; + ofp = fopen(ofp_filename, "wb"); + if (!ofp) fatal_error("%s: %s", ofp_filename, strerror(errno)); + } + break; + + case FILENAME_OPT: + if (set_font_name) + fatal_error("Macintosh font filename already specified"); + set_font_name = clp->arg; + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1mac (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 2000-2003 Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) + ifp = stdin; + else { + ifp_filename = clp->arg; + ifp = fopen(clp->arg, "r"); + if (!ifp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!ifp) ifp = stdin; + if (!ofp) ofp = stdout; + +#if defined(_MSDOS) || defined(_WIN32) + /* As we are processing a PFB (binary) output */ + /* file, we must set its file mode to binary. */ + _setmode(_fileno(ofp), _O_BINARY); +#endif + + /* prepare font reader */ + fr.output_ascii = t1mac_output_ascii; + fr.output_binary = t1mac_output_binary; + fr.output_end = t1mac_output_end; + + /* prepare resource fork file */ + rfork_f = tmpfile(); + if (!rfork_f) + fatal_error("cannot open temorary file: %s", strerror(errno)); + for (i = 0; i < RFORK_HEADERLEN; i++) + putc(0, rfork_f); + init_current_post(); + + /* peek at first byte to see if it is the PFB marker 0x80 */ + c = getc(ifp); + ungetc(c, ifp); + + /* do the file */ + if (c == PFB_MARKER) + process_pfb(ifp, ifp_filename, &fr); + else if (c == '%') + process_pfa(ifp, ifp_filename, &fr); + else + fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); + if (ifp != stdin) + fclose(ifp); + + /* check if anything was read */ + if (nrsrc == 0) + error("no POST resources written -- are you sure this was a font?"); + + /* output large B/W icon */ + output_new_rsrc("ICN#", 256, 32, (const char *)icon_bw_data, 256); + /* output FREF */ + output_new_rsrc("FREF", 256, 32, "LWFN\0\0\0", 7); + /* output BNDL */ + output_new_rsrc("BNDL", 256, 32, "T1UT\0\0\0\1FREF\0\0\0\0\1\0ICN#\0\0\0\0\1\0", 28); + /* output other icons */ + output_new_rsrc("icl8", 256, 32, (const char *)icon_8_data, 1024); + output_new_rsrc("icl4", 256, 32, (const char *)icon_4_data, 512); + output_new_rsrc("ics#", 256, 32, (const char *)small_icon_bw_data, 64); + output_new_rsrc("ics8", 256, 32, (const char *)small_icon_8_data, 256); + output_new_rsrc("ics4", 256, 32, (const char *)small_icon_4_data, 128); + /* output T1UT (signature) */ + output_new_rsrc("T1UT", 0, 0, "DConverted by t1mac (t1utils) \251Eddie Kohler http://www.lcdf.org/type/", 69); + + /* finish off resource file */ + rfork_len = complete_rfork(); + + /* prepare font name */ + if (!set_font_name && font_name) { + int part = 0, len = 0; + char *x, *s; + for (x = s = font_name; *s; s++) + if (isupper(*s) || isdigit(*s)) { + *x++ = *s; + part++; + len = 1; + } else if (islower(*s)) { + if (len < (part <= 1 ? 5 : 3)) + *x++ = *s; + len++; + } + *x++ = 0; + set_font_name = font_name; + } else if (!set_font_name) + set_font_name = "Unknown Font"; + + /* now, output the file */ + if (macbinary) + output_macbinary(rfork_f, rfork_len, set_font_name, ofp); + else if (raw) + output_raw(rfork_f, rfork_len, ofp); + else if (applesingle || appledouble) + output_applesingle(rfork_f, rfork_len, set_font_name, ofp, appledouble); + else if (binhex) + output_binhex(rfork_f, rfork_len, set_font_name, ofp); + else + fatal_error("strange output format"); + fclose(rfork_f); + + if (ofp != stdout) + fclose(ofp); + return 0; +} diff --git a/Build/source/utils/t1utils/t1unmac.1 b/Build/source/utils/t1utils/t1unmac.1 new file mode 100644 index 00000000000..deb6f252136 --- /dev/null +++ b/Build/source/utils/t1utils/t1unmac.1 @@ -0,0 +1,71 @@ +.ds V 1.32 +.de M +.BR "\\$1" "(\\$2)\\$3" +.. +.TH T1UNMAC 1 "" "Version \*V" +.SH NAME +t1unmac \- translate a Mac PostScript Type 1 font into PFA or PFB format +.SH SYNOPSIS +.B t1unmac +\%[\fB\-a\fR|\fB\-b\fR] +\%[\fB\-r\fR] +\%[\fIinput\fR [\fIoutput\fR]] +.SH DESCRIPTION +.B t1unmac +extracts POST resources from a Macintosh PostScript font file and creates a +PFA (hexadecimal) or PFB (binary) font file. The file +.I input +should be in MacBinary I or II, AppleSingle, AppleDouble, or BinHex format, +or it can be a raw resource fork. If the file is a raw resource fork, you +need to give the `\-\-raw' option; otherwise +.B t1unmac +should automatically figure out what kind of file you have. If the file +.I output +is not specified output goes to the standard output. +.SH OPTIONS +.TP 5 +.BR \-\-pfa ", " \-a +Output in PFA (ASCII) format. +.TP 5 +.BR \-\-pfb ", " \-b +Output in PFB (binary) format. This is the default. +.TP 5 +.BR \-\-raw ", " \-r +Indicates that the input is a raw resource fork. +.TP 5 +.BR \-\-macbinary +Indicates that the input is in MacBinary I or II format. +.TP 5 +.BR \-\-applesingle +Indicates that the input is in AppleSingle format. +.TP 5 +.BR \-\-appledouble +Indicates that the input is in AppleDouble format. +.TP 5 +.BR \-\-binhex +Indicates that the input is in BinHex 4.0 format. +.TP +.BI \-\-block\-length= "num\fR, " \-l " num" +PFB only: Set the maximum output block length to +.I num. +The default length is as large as memory allows. +.TP +.BI \-\-line\-length= "num\fR, " \-l " num" +PFA only: Set the maximum length of encrypted lines in the output to +.I num. +(These are the lines consisting wholly of hexadecimal digits.) The default +is 64. +.SH "SEE ALSO" +.LP +.M t1mac 1 , +.M t1ascii 1 , +.M t1binary 1 , +.M t1asm 1 , +.M t1disasm 1 +.SH AUTHORS +Lee Hetherington (ilh@lcs.mit.edu) +.br +Eddie Kohler (kohler@icir.org) +.PP +Ported to Microsoft C/C++ Compiler and MS-DOS operating system by +Kai-Uwe Herbing (herbing@netmbx.netmbx.de). diff --git a/Build/source/utils/t1utils/t1unmac.c b/Build/source/utils/t1utils/t1unmac.c new file mode 100644 index 00000000000..fa2cec2a6f4 --- /dev/null +++ b/Build/source/utils/t1utils/t1unmac.c @@ -0,0 +1,923 @@ +/* t1unmac/unpost + * + * This program converts Macintosh Type 1 fonts stored in MacBinary (I or II), + * AppleSingle, AppleDouble, BinHex, or raw resource fork format to PFA and + * PFB formats. + * + * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. + * + * Permission is hereby granted to use, modify, and distribute this program + * for any purpose provided this copyright notice and the one below remain + * intact. + * + * I. Lee Hetherington (ilh@lcs.mit.edu) + * + * 1.5 and later versions contain changes by, and are maintained by, + * Eddie Kohler <kohler@icir.org>. + * + * New change log in `NEWS'. Old change log: + * + * Revision 1.2 92/06/23 10:57:33 ilh + * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) + * incoporated. + * + * Revision 1.1 92/05/22 12:07:49 ilh + * initial version + * + * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by + * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code + * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS + * ... #endif, where _MSDOS is an identifier, which is automatically + * defined, if you compile with the Microsoft C/C++ Compiler. + * */ + +/* Note: this is ANSI C. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif +#if defined(_MSDOS) || defined(_WIN32) +# include <fcntl.h> +# include <getopt.h> +# include <io.h> +#endif +#include <stdio.h> +#include <stdlib.h> +#include <limits.h> +#include <stdarg.h> +#include <string.h> +#include <errno.h> +#include <ctype.h> +#include <lcdf/clp.h> +#include "t1lib.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* for PFB block buffering */ +void fatal_error(const char *message, ...); +void error(const char *message, ...); + + +/* Some functions to read one, two, three, and four byte integers in 68000 + byte order (most significant byte first). */ + +static int +read_one(FILE *fi) +{ + return getc(fi); +} + +static int +read_two(FILE *fi) +{ + int val; + + val = getc(fi); + val = (val << 8) | getc(fi); + + return val; +} + +static int32_t +read_three(FILE *fi) +{ + int32_t val; + + val = getc(fi); + val = (val << 8) | getc(fi); + val = (val << 8) | getc(fi); + + return val; +} + +static int32_t +read_four(FILE *fi) +{ + int32_t val; + + val = getc(fi); + val = (val << 8) | getc(fi); + val = (val << 8) | getc(fi); + val = (val << 8) | getc(fi); + + return val; +} + +/* reposition a file with error messages */ + +static void +reposition(FILE *fi, int32_t absolute) +{ + if (fseek(fi, absolute, 0) == -1) + fatal_error("can't seek to position %d\n\ + (The Mac file may be corrupted, or you may need the `-r' option.)", + absolute); +} + +static int blocklen = -1; + +static int hex_column = 0; /* current column of hex ASCII output */ + +static void +output_hex_byte(FILE *fo, int b) +{ + static const char *hex = "0123456789abcdef"; + + if (hex_column >= blocklen) { + putc('\n', fo); + hex_column = 0; + } + putc(hex[b >> 4], fo); + putc(hex[b & 0xf], fo); + hex_column += 2; +} + +/* Function to extract a particular POST resource. Offset points to the four + byte length which is followed by the data. The first byte of the POST data + specifies resource type: 1 for ASCII, 2 for binary, and 5 for end. The + second byte is always zero. */ + + +/* Function to write four byte length to PFB file: least significant byte + first. */ + +static int +extract_data(FILE *fi, FILE *fo, struct pfb_writer *w, int32_t offset, int pfb) +{ + enum PS_type { PS_ascii = 1, PS_binary = 2, PS_end = 5 }; + static int last_type = -1; + static int skip_newline = 0; + int32_t len; + int more = 1; + int i, c; + + reposition(fi, offset); + len = read_four(fi) - 2; /* subtract type field */ + + switch ((enum PS_type)read_one(fi)) { + + case PS_ascii: { + (void) read_one(fi); + if (last_type != PFB_ASCII && pfb) { + pfb_writer_output_block(w); + w->blocktyp = PFB_ASCII; + } + for (i = 0; i < len; i++) { + c = read_one(fi); + if (c == '\n' && skip_newline) { + skip_newline = 0; + continue; + } + if (c == '\r') { + c = '\n'; + skip_newline = 1; + } else + skip_newline = 0; + if (pfb) + PFB_OUTPUT_BYTE(w, c); + else + putc(c, fo); + } + last_type = PFB_ASCII; + break; + } + + case PS_binary: { + (void) read_one(fi); + if (last_type != PFB_BINARY && pfb) { + pfb_writer_output_block(w); + w->blocktyp = PFB_BINARY; + } else if (last_type != PFB_BINARY) + hex_column = 0; + if (pfb) { + while (len--) + PFB_OUTPUT_BYTE(w, read_one(fi)); + } else { + while (len--) + output_hex_byte(fo, read_one(fi)); + } + last_type = PFB_BINARY; + break; + } + + case PS_end: + more = 0; + break; + + } + + return more; +} + + +/***** + * Command line + **/ + +#define OUTPUT_OPT 301 +#define VERSION_OPT 302 +#define HELP_OPT 303 +#define PFB_OPT 304 +#define PFA_OPT 305 +#define MACBINARY_OPT 306 +#define RAW_OPT 307 +#define LINE_LEN_OPT 308 +#define APPLEDOUBLE_OPT 309 +#define BINHEX_OPT 310 + +static Clp_Option options[] = { + { "applesingle", 0, APPLEDOUBLE_OPT, 0, 0 }, + { "appledouble", 0, APPLEDOUBLE_OPT, 0, 0 }, + { "binhex", 0, BINHEX_OPT, 0, 0 }, + { "block-length", 0, LINE_LEN_OPT, Clp_ArgUnsigned, 0 }, + { "help", 0, HELP_OPT, 0, 0 }, + { "line-length", 'l', LINE_LEN_OPT, Clp_ArgUnsigned, 0 }, + { "macbinary", 0, MACBINARY_OPT, 0, 0 }, + { "output", 'o', OUTPUT_OPT, Clp_ArgString, 0 }, + { "pfa", 'a', PFA_OPT, 0, 0 }, + { "pfb", 'b', PFB_OPT, 0, 0 }, + { "raw", 'r', RAW_OPT, 0, 0 }, + { "version", 0, VERSION_OPT, 0, 0 }, +}; +static const char *program_name; + +void +fatal_error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); + exit(1); +} + +void +error(const char *message, ...) +{ + va_list val; + va_start(val, message); + fprintf(stderr, "%s: ", program_name); + vfprintf(stderr, message, val); + putc('\n', stderr); +} + +void +short_usage(void) +{ + fprintf(stderr, "Usage: %s [OPTION]... INPUT [OUTPUT]\n\ +Try `%s --help' for more information.\n", + program_name, program_name); +} + +void +usage(void) +{ + printf("\ +`T1unmac' extracts a PostScript Type 1 font from a Macintosh font file. It can\n\ +read MacBinary, AppleSingle, AppleDouble, or BinHex files, or raw Macintosh\n\ +resource forks. The result is written to the standard output unless an OUTPUT\n\ +file is given.\n\ +\n\ +Usage: %s [OPTION]... INPUT [OUTPUT]\n\ +\n\ +Options:\n\ + -r, --raw Input is a raw Macintosh resource fork.\n\ + --macbinary Input is in MacBinary format.\n\ + --applesingle Input is in AppleSingle format.\n\ + --appledouble Input is in AppleDouble format.\n\ + --binhex Input is in BinHex format.\n\ + -a, --pfa Output font in ASCII (PFA) format.\n\ + -b, --pfb Output font in binary (PFB) format. This is\n\ + the default.\n\ + -l, --block-length NUM Set max block length for PFB output.\n\ + -l, --line-length NUM Set max encrypted line length for PFA output.\n\ + -o, --output FILE Write output to FILE.\n\ + -h, --help Print this message and exit.\n\ + --version Print version number and warranty and exit.\n\ +\n\ +Report bugs to <kohler@icir.org>.\n", program_name); +} + + +static const char * +check_macbinary(FILE *ifp) +{ + int i, j; + char buf[124]; + + /* check "version" bytes at offsets 0 and 74 */ + reposition(ifp, 0); + if (read_one(ifp) != 0) + return "bad version byte"; + reposition(ifp, 74); + if (read_one(ifp) != 0) + return "bad version byte"; + +#if 0 + /* write out bullshit */ + {int t; + reposition(ifp, 65); + t = read_four(ifp); + fprintf(stderr, "Type %c%c%c%c\n", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255); + t = read_four(ifp); + fprintf(stderr, "Creator %c%c%c%c\n", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255); + t = read_one(ifp); + fprintf(stderr, "Finder flags 1 %02x\n", t); + read_one(ifp); + t = read_two(ifp); + fprintf(stderr, "horizpos %04x\n", t); + t = read_two(ifp); + fprintf(stderr, "vertpos %04x\n", t); + t = read_two(ifp); + fprintf(stderr, "folder id %d\n", t); + t = read_one(ifp); + fprintf(stderr, "protected? %x\n", t); + t = read_one(ifp); + t = read_four(ifp); + fprintf(stderr, "data len %d\n", t); + t = read_four(ifp); + fprintf(stderr, "rsrc len %d\n", t); + t = read_four(ifp); + { + struct tm *crap; + fprintf(stderr, "creation date %x\n", t); + t -= 2082844800; + fprintf(stderr, " %s\n", ctime(&t)); + t = read_four(ifp); + fprintf(stderr, "modification date %x\n", t); + t -= 2082844800; + fprintf(stderr, " %s\n", ctime(&t)); + t = read_two(ifp); + } + fprintf(stderr, "getinfo len %d\n", t); + t = read_one(ifp); + fprintf(stderr, "finderflags 2 %02x\n", t); + reposition(ifp, 116); + t = read_four(ifp); + fprintf(stderr, "total len %d\n", t); + t = read_two(ifp); + fprintf(stderr, "secondary header len %d\n", t); + t = read_one(ifp); + fprintf(stderr, "version %d\n", t); + t = read_one(ifp); + fprintf(stderr, "version %d\n", t); + } +#endif + + /* check file length */ + reposition(ifp, 1); + i = read_one(ifp); + if (i > 63) + return "bad length"; + reposition(ifp, 83); + i = read_four(ifp); + j = read_four(ifp); + if (i < 0 || j < 0 || i >= 0x800000 || j >= 0x800000) + return "bad length"; + + /* check CRC */ + reposition(ifp, 0); + fread(buf, 1, 124, ifp); + if (crcbuf(0, 124, buf) != read_two(ifp)) { + reposition(ifp, 82); + if (read_one(ifp) != 0) + return "bad checksum"; + } + + return 0; +} + +#define APPLESINGLE_MAGIC 0x00051600 +#define APPLEDOUBLE_MAGIC 0x00051607 + +const char * +check_appledouble(FILE *ifp) +{ + int i; + reposition(ifp, 0); + i = read_four(ifp); + if (i != APPLEDOUBLE_MAGIC && i != APPLESINGLE_MAGIC) + return "bad magic number"; + + return 0; +} + +const char * +translate_binhex(FILE *f, FILE *tmpf) +{ + int i, c = 0, last_char, after_x90, bits, bitpos; + unsigned char value_table[256]; + + /* prepare value table */ + { + const char *table = "!\"#$%&'()*+,-012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr"; + for (i = 0; i < 256; i++) + value_table[i] = 255; + for (i = 0; *table; i++, table++) + value_table[(unsigned char)*table] = i; + } + + /* skip to comment */ + { + const char *comment = "(This file must be converted with BinHex"; + while (!feof(f)) { + const char *s; + for (s = comment; *s; s++) { + c = getc(f); + if (c != *s) + break; + } + /* skip to end of line */ + while (c >= 0 && c != '\n' && c != '\r') + c = getc(f); + /* stop if read comment */ + if (!*s) + goto found_comment; + } + /* failed */ + return "no comment"; + } + + found_comment: + /* skip spaces, look for ':' */ + for (c = ' '; isspace(c); c = getc(f)) ; + if (c != ':') + return "no file-start character"; + + /* found ':', process until you find another ':' */ + last_char = -1; + after_x90 = bits = 0; + bitpos = 10; + for (c = getc(f); c >= 0; c = getc(f)) + if (!isspace(c)) { + /* add 6 bits to bits */ + if (value_table[c] == 255) + break; + bits |= (value_table[c] << bitpos); + bitpos -= 6; + + /* output character(s) */ + if (bitpos <= 2) { + int d = bits >> 8; + bits = (bits << 8) & 0xFF00; + bitpos += 8; + if (after_x90) { + /* handle compression */ + if (d == 0) { + last_char = 0x90; + putc(0x90, tmpf); + } else + for (i = 1; i < d; i++) + putc(last_char, tmpf); + after_x90 = 0; + } else if (d == 0x90) + after_x90 = 1; + else { + last_char = d; + putc(d, tmpf); + } + } + } + + if (c < 0) + return "unexpected EOF"; + else if (c != ':') + return "bad character"; + + fflush(tmpf); + return 0; +} + +int +check_binhex_crc(FILE *f, int offset, int length) +{ + int crc = 0; + char buf[2048]; + reposition(f, offset); + while (length > 0) { + int n = (length < 2048 ? length : 2048); + fread(buf, 1, n, f); + crc = crcbuf(crc, n, buf); + length -= n; + } + return crc == 0; +} + +const char * +check_binhex(FILE *f) +{ + int fname_len, data_len, rsrc_len, off; + + /* check lengths */ + reposition(f, 0); + fname_len = read_one(f); + if (fname_len < 1 || fname_len > 63) + return "bad length"; + reposition(f, 1 + fname_len + 11); + data_len = read_four(f); + rsrc_len = read_four(f); + if (data_len < 0 || rsrc_len < 0 || data_len >= 0x800000 || rsrc_len >= 0x800000) + return "bad length"; + + /* check version */ + reposition(f, 1 + fname_len); + if (read_one(f) != 0) + return "bad version"; + + /* check CRC */ + off = 1 + fname_len + 21; + if (!check_binhex_crc(f, 0, off)) + return "bad header CRC"; + if (!check_binhex_crc(f, off, data_len + 2)) + return "bad data CRC"; + if (!check_binhex_crc(f, off + data_len + 2, rsrc_len + 2)) + return "bad resource fork CRC"; + + return 0; +} + +#ifdef __cplusplus +} +#endif + + +int +main(int argc, char *argv[]) +{ + FILE *ifp = 0; + FILE *ofp = 0; + struct pfb_writer w; + const char *ifp_name = "<stdin>"; + int32_t res_offset, res_data_offset, res_map_offset, type_list_offset; + int32_t post_type; + int num_types, num_extracted = 0, pfb = 1; + int raw = 0, appledouble = 0, binhex = 0, macbinary = 0; + + Clp_Parser *clp = + Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); + program_name = Clp_ProgramName(clp); + + /* interpret command line arguments using CLP */ + while (1) { + int opt = Clp_Next(clp); + switch (opt) { + + case RAW_OPT: + raw = 1; + appledouble = binhex = macbinary = 0; + break; + + case MACBINARY_OPT: + macbinary = 1; + raw = appledouble = binhex = 0; + break; + + case APPLEDOUBLE_OPT: + appledouble = 1; + raw = binhex = macbinary = 0; + break; + + case BINHEX_OPT: + binhex = 1; + raw = appledouble = macbinary = 0; + break; + + output_file: + case OUTPUT_OPT: + if (ofp) + fatal_error("output file already specified"); + if (strcmp(clp->arg, "-") == 0) + ofp = stdout; + else { + ofp = fopen(clp->arg, "w"); + if (!ofp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case PFB_OPT: + pfb = 1; + break; + + case PFA_OPT: + pfb = 0; + break; + + case LINE_LEN_OPT: + blocklen = clp->val.i; + break; + + case HELP_OPT: + usage(); + exit(0); + break; + + case VERSION_OPT: + printf("t1unmac (LCDF t1utils) %s\n", VERSION); + printf("Copyright (C) 1992-2003 I. Lee Hetherington, Eddie Kohler et al.\n\ +This is free software; see the source for copying conditions.\n\ +There is NO warranty, not even for merchantability or fitness for a\n\ +particular purpose.\n"); + exit(0); + break; + + case Clp_NotOption: + if (ifp && ofp) + fatal_error("too many arguments"); + else if (ifp) + goto output_file; + if (strcmp(clp->arg, "-") == 0) + ifp = stdin; + else { + ifp_name = clp->arg; + ifp = fopen(clp->arg, "rb"); + if (!ifp) fatal_error("%s: %s", clp->arg, strerror(errno)); + } + break; + + case Clp_Done: + goto done; + + case Clp_BadOption: + short_usage(); + exit(1); + break; + + } + } + + done: + if (!ifp) ifp = stdin; + if (!ofp) ofp = stdout; + +#if defined(_MSDOS) || defined(_WIN32) + _setmode(_fileno(ifp), _O_BINARY); + /* If we are processing a PFB (binary) output */ + /* file, we must set its file mode to binary. */ + if (pfb) + _setmode(_fileno(ofp), _O_BINARY); +#endif + + if (pfb) + init_pfb_writer(&w, blocklen, ofp); + else { + if (blocklen == -1) + blocklen = 64; + else if (blocklen < 8) { + blocklen = 8; + error("warning: line length raised to %d", blocklen); + } else if (blocklen > 1024) { + blocklen = 1024; + error("warning: line length lowered to %d", blocklen); + } + } + + /* check for non-seekable input */ + if (fseek(ifp, 0, 0)) { + char buf[2048]; + FILE *tmp = tmpfile(); + if (!tmp) + fatal_error("cannot open temporary file: %s", strerror(errno)); + while (!feof(ifp)) { + int i = fread(buf, 1, 2048, ifp); + if (i > 0) + fwrite(buf, 1, i, tmp); + } + if (ferror(ifp)) + fatal_error("%s: %s", ifp_name, strerror(errno)); + reposition(tmp, 0); + fflush(tmp); + if (ifp != stdin) + fclose(ifp); + ifp = tmp; + } + + /* check for empty file */ + fseek(ifp, 0, 2); + if (ftell(ifp) == 0) + fatal_error("%s: empty file\n\ + (Try re-transferring the files using MacBinary format.)", + ifp_name); + + reposition(ifp, 0); + if (!raw && !appledouble && !binhex && !macbinary) { + /* check magic number, try to figure out what it is */ + int i, magic; + magic = read_four(ifp); + reposition(ifp, 0); + + if (magic == APPLESINGLE_MAGIC || magic == APPLEDOUBLE_MAGIC) + appledouble = 1; + else if ((magic & 0xFF000000) == 0) + macbinary = 1; + else { + binhex = 1; + for (i = 0; i < 4; i++, magic >>= 8) + if (!isprint(magic & 0xFF) && !isspace(magic & 0xFF)) + /* not an ASCII character, assume not BinHex */ + binhex = 0; + } + + if (!appledouble && !macbinary && !binhex) + fatal_error("%s: unknown file type", ifp_name); + } + + if (raw) { + /* raw resource file */ + res_offset = 0; + + } else if (macbinary) { /* MacBinary (I or II) file */ + const char *check; + int32_t data_fork_size; + + /* check integrity of file */ + check = check_macbinary(ifp); + if (check) + fatal_error("%s: not a MacBinary file (%s)", ifp_name, check); + + /* read data and resource fork sizes in MacBinary header */ + reposition(ifp, 83); + data_fork_size = read_four(ifp); + (void) read_four(ifp); + + /* round data_fork_size up to multiple of 128 */ + if (data_fork_size % 128) + data_fork_size += 128 - data_fork_size % 128; + + res_offset = 128 + data_fork_size; + + } else if (appledouble) { /* AppleDouble file */ + const char *check; + const char *applewhat; + int i, n; + + /* check integrity */ + check = check_appledouble(ifp); + if (check) + fatal_error("%s: not an AppleDouble file (%s)", ifp_name, check); + reposition(ifp, 0); + if (read_four(ifp) == APPLESINGLE_MAGIC) + applewhat = "AppleSingle"; + else + applewhat = "AppleDouble"; + + /* find offset to resource and/or data fork */ + reposition(ifp, 24); + n = read_two(ifp); + res_offset = -1; + for (i = 0; i < n; i++) { + int type = read_four(ifp); + if (type == 0) + fatal_error("%s: bad %s file (bad entry descriptor)", ifp_name, applewhat); + if (type == 2) /* resource fork entry */ + res_offset = read_four(ifp); + else + (void) read_four(ifp); + (void) read_four(ifp); + } + if (res_offset < 0) + fatal_error("%s: bad %s file (no resource fork)", ifp_name, applewhat); + + } else if (binhex) { /* BinHex file */ + const char *check; + FILE *tmpf = tmpfile(); + if (!tmpf) + fatal_error("cannot open temporary file: %s", strerror(errno)); + + /* check integrity */ + check = translate_binhex(ifp, tmpf); + if (check) + fatal_error("%s: not a BinHex file (%s)", ifp_name, check); + check = check_binhex(tmpf); + if (check) + fatal_error("%s: bad BinHex file (%s)", ifp_name, check); + + /* find resource offset */ + reposition(tmpf, 0); + res_offset = read_one(tmpf); + reposition(tmpf, 1 + res_offset + 11); + res_offset += 22 + read_four(tmpf) + 2; + if (ifp != stdin) + fclose(ifp); + ifp = tmpf; + + } else { + fatal_error("%s: strange format", ifp_name); + exit(1); + } + + /* read offsets from resource fork header */ + reposition(ifp, res_offset); + res_data_offset = res_offset + read_four(ifp); + res_map_offset = res_offset + read_four(ifp); + + /* read type list offset from resource map header */ + reposition(ifp, res_map_offset + 24); + type_list_offset = res_map_offset + read_two(ifp); + + /* read type list */ + reposition(ifp, type_list_offset); + num_types = read_two(ifp) + 1; + + /* find POST type */ + post_type = (int32_t)('P' & 0xff) << 24; + post_type |= (int32_t)('O' & 0xff) << 16; + post_type |= (int32_t)('S' & 0xff) << 8; + post_type |= (int32_t)('T' & 0xff); + + while (num_types--) { + if (read_four(ifp) == post_type) { + int nrsrc = 1 + read_two(ifp); + int list_offset = type_list_offset + read_two(ifp); + int rsrc_pos = 0; + int want_id = 501; + int second_time = 1; + reposition(ifp, list_offset); + /* read resources sequentially, starting with ID 501, until we encounter + an "end" resource or we can't find the next resource */ + while (rsrc_pos < nrsrc) { + int offset = ftell(ifp); + int id = read_two(ifp); + if (id == want_id) { + (void) read_two(ifp); + (void) read_one(ifp); + num_extracted++; + if (!extract_data(ifp, ofp, &w, res_data_offset + read_three(ifp), pfb)) + break; + second_time = 0; + want_id++; + } + reposition(ifp, offset + 12); + rsrc_pos++; + if (rsrc_pos >= nrsrc && !second_time) { + reposition(ifp, list_offset); + rsrc_pos = 0; + } + } + break; + } else { + (void) read_two(ifp); + (void) read_two(ifp); + } + } + +#if 0 + system("/bin/rm -f /tmp/x.*"); + { + FILE *f; + int i; + reposition(ifp, res_offset + 16); + if ((f = fopen("/tmp/x.systemarea", "wb"))) { + for (i = res_offset + 16; i < res_data_offset; i++) { + putc(getc(ifp), f); + } + fclose(f); + } + } + reposition(ifp, type_list_offset); + num_types = read_two(ifp) + 1; + while (num_types--) { + int t = read_four(ifp); + int num_of_type = 1 + read_two(ifp); + int32_t save_offset = ftell(ifp) + 2; + reposition(ifp, type_list_offset + read_two(ifp)); + while (num_of_type--) { + FILE *f; + char buf[2048]; + int x, i, attrs; + x = ftell(ifp); + i = read_two(ifp); /* ID */ + read_two(ifp); + attrs = read_one(ifp); + sprintf(buf, "/tmp/x.%c%c%c%c.%d", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255, i); + fprintf(stderr, "%c%c%c%c.%d %d", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255, i, attrs); + if ((f = fopen(buf, "wb"))) { + int l; + reposition(ifp, res_data_offset + read_three(ifp)); + l = read_four(ifp); + fprintf(stderr, " %d\n", l); + while (l > 0) { + int n = (l < 2048 ? l : 2048); + fread(buf, 1, n, ifp); + fwrite(buf, 1, n, f); + l -= n; + } + fclose(f); + } + reposition(ifp, x + 12); + } + reposition(ifp, save_offset); + } +#endif + + if (pfb) + pfb_writer_end(&w); + if (num_extracted == 0) + error("%s: not a Type 1 font (no POST resources)", ifp_name); + + fclose(ifp); + fclose(ofp); + return 0; +} diff --git a/Build/source/utils/t1utils/t1utils.spec b/Build/source/utils/t1utils/t1utils.spec new file mode 100644 index 00000000000..455e3cfe371 --- /dev/null +++ b/Build/source/utils/t1utils/t1utils.spec @@ -0,0 +1,53 @@ +Summary: Programs for manipulating PostScript Type 1 fonts + +Name: t1utils +Version: 1.32 +Release: 1 +Source: http://www.lcdf.org/type/t1utils-1.32.tar.gz + +URL: http://www.lcdf.org/type/ + +Group: Utilities/Printing +Vendor: Little Cambridgeport Design Factory +Packager: Eddie Kohler <kohler@icir.org> +License: freely modifiable and distributable + +BuildRoot: /tmp/t1utils-build + +%description +The t1utils package is a set of programs for +manipulating PostScript Type 1 fonts. It contains +programs to change between binary PFB format (for +storage), ASCII PFA format (for printing), a +human-readable and -editable ASCII format, and +Macintosh resource forks. + +%prep +%setup + +%build +%configure +make + +%install +[ "$RPM_BUILD_ROOT" != "/" ] && [ -d $RPM_BUILD_ROOT ] && rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT +make DESTDIR=$RPM_BUILD_ROOT install + +%clean +[ "$RPM_BUILD_ROOT" != "/" ] && [ -d $RPM_BUILD_ROOT ] && rm -rf $RPM_BUILD_ROOT + +%files +%attr(-,root,root) %doc NEWS README +%attr(0755,root,root) %{_bindir}/t1ascii +%attr(0755,root,root) %{_bindir}/t1binary +%attr(0755,root,root) %{_bindir}/t1asm +%attr(0755,root,root) %{_bindir}/t1disasm +%attr(0755,root,root) %{_bindir}/t1unmac +%attr(0755,root,root) %{_bindir}/t1mac +%attr(0644,root,root) %{_mandir}/man1/t1ascii.1* +%attr(0644,root,root) %{_mandir}/man1/t1binary.1* +%attr(0644,root,root) %{_mandir}/man1/t1asm.1* +%attr(0644,root,root) %{_mandir}/man1/t1disasm.1* +%attr(0644,root,root) %{_mandir}/man1/t1unmac.1* +%attr(0644,root,root) %{_mandir}/man1/t1mac.1* |