summaryrefslogtreecommitdiff
path: root/Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua
diff options
context:
space:
mode:
Diffstat (limited to 'Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua')
-rw-r--r--Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua323
1 files changed, 0 insertions, 323 deletions
diff --git a/Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua b/Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua
deleted file mode 100644
index 25f0b95e15e..00000000000
--- a/Build/source/texk/web2c/luatexdir/luasocket/etc/lp.lua
+++ /dev/null
@@ -1,323 +0,0 @@
------------------------------------------------------------------------------
--- LPD support for the Lua language
--- LuaSocket toolkit.
--- Author: David Burgess
--- Modified by Diego Nehab, but David is in charge
------------------------------------------------------------------------------
---[[
- if you have any questions: RFC 1179
-]]
--- make sure LuaSocket is loaded
-local io = require("io")
-local base = _G
-local os = require("os")
-local math = require("math")
-local string = require("string")
-local socket = require("socket")
-local ltn12 = require("ltn12")
-module("socket.lp")
-
--- default port
-PORT = 515
-SERVER = os.getenv("SERVER_NAME") or os.getenv("COMPUTERNAME") or "localhost"
-PRINTER = os.getenv("PRINTER") or "printer"
-
-local function connect(localhost, option)
- local host = option.host or SERVER
- local port = option.port or PORT
- local skt
- local try = socket.newtry(function() if skt then skt:close() end end)
- if option.localbind then
- -- bind to a local port (if we can)
- local localport = 721
- local done, err
- repeat
- skt = socket.try(socket.tcp())
- try(skt:settimeout(30))
- done, err = skt:bind(localhost, localport)
- if not done then
- localport = localport + 1
- skt:close()
- skt = nil
- else break end
- until localport > 731
- socket.try(skt, err)
- else skt = socket.try(socket.tcp()) end
- try(skt:connect(host, port))
- return { skt = skt, try = try }
-end
-
---[[
-RFC 1179
-5.3 03 - Send queue state (short)
-
- +----+-------+----+------+----+
- | 03 | Queue | SP | List | LF |
- +----+-------+----+------+----+
- Command code - 3
- Operand 1 - Printer queue name
- Other operands - User names or job numbers
-
- If the user names or job numbers or both are supplied then only those
- jobs for those users or with those numbers will be sent.
-
- The response is an ASCII stream which describes the printer queue.
- The stream continues until the connection closes. Ends of lines are
- indicated with ASCII LF control characters. The lines may also
- contain ASCII HT control characters.
-
-5.4 04 - Send queue state (long)
-
- +----+-------+----+------+----+
- | 04 | Queue | SP | List | LF |
- +----+-------+----+------+----+
- Command code - 4
- Operand 1 - Printer queue name
- Other operands - User names or job numbers
-
- If the user names or job numbers or both are supplied then only those
- jobs for those users or with those numbers will be sent.
-
- The response is an ASCII stream which describes the printer queue.
- The stream continues until the connection closes. Ends of lines are
- indicated with ASCII LF control characters. The lines may also
- contain ASCII HT control characters.
-]]
-
--- gets server acknowledement
-local function recv_ack(con)
- local ack = con.skt:receive(1)
- con.try(string.char(0) == ack, "failed to receive server acknowledgement")
-end
-
--- sends client acknowledement
-local function send_ack(con)
- local sent = con.skt:send(string.char(0))
- con.try(sent == 1, "failed to send acknowledgement")
-end
-
--- sends queue request
--- 5.2 02 - Receive a printer job
---
--- +----+-------+----+
--- | 02 | Queue | LF |
--- +----+-------+----+
--- Command code - 2
--- Operand - Printer queue name
---
--- Receiving a job is controlled by a second level of commands. The
--- daemon is given commands by sending them over the same connection.
--- The commands are described in the next section (6).
---
--- After this command is sent, the client must read an acknowledgement
--- octet from the daemon. A positive acknowledgement is an octet of
--- zero bits. A negative acknowledgement is an octet of any other
--- pattern.
-local function send_queue(con, queue)
- queue = queue or PRINTER
- local str = string.format("\2%s\10", queue)
- local sent = con.skt:send(str)
- con.try(sent == string.len(str), "failed to send print request")
- recv_ack(con)
-end
-
--- sends control file
--- 6.2 02 - Receive control file
---
--- +----+-------+----+------+----+
--- | 02 | Count | SP | Name | LF |
--- +----+-------+----+------+----+
--- Command code - 2
--- Operand 1 - Number of bytes in control file
--- Operand 2 - Name of control file
---
--- The control file must be an ASCII stream with the ends of lines
--- indicated by ASCII LF. The total number of bytes in the stream is
--- sent as the first operand. The name of the control file is sent as
--- the second. It should start with ASCII "cfA", followed by a three
--- digit job number, followed by the host name which has constructed the
--- control file. Acknowledgement processing must occur as usual after
--- the command is sent.
---
--- The next "Operand 1" octets over the same TCP connection are the
--- intended contents of the control file. Once all of the contents have
--- been delivered, an octet of zero bits is sent as an indication that
--- the file being sent is complete. A second level of acknowledgement
--- processing must occur at this point.
-
--- sends data file
--- 6.3 03 - Receive data file
---
--- +----+-------+----+------+----+
--- | 03 | Count | SP | Name | LF |
--- +----+-------+----+------+----+
--- Command code - 3
--- Operand 1 - Number of bytes in data file
--- Operand 2 - Name of data file
---
--- The data file may contain any 8 bit values at all. The total number
--- of bytes in the stream may be sent as the first operand, otherwise
--- the field should be cleared to 0. The name of the data file should
--- start with ASCII "dfA". This should be followed by a three digit job
--- number. The job number should be followed by the host name which has
--- constructed the data file. Interpretation of the contents of the
--- data file is determined by the contents of the corresponding control
--- file. If a data file length has been specified, the next "Operand 1"
--- octets over the same TCP connection are the intended contents of the
--- data file. In this case, once all of the contents have been
--- delivered, an octet of zero bits is sent as an indication that the
--- file being sent is complete. A second level of acknowledgement
--- processing must occur at this point.
-
-
-local function send_hdr(con, control)
- local sent = con.skt:send(control)
- con.try(sent and sent >= 1 , "failed to send header file")
- recv_ack(con)
-end
-
-local function send_control(con, control)
- local sent = con.skt:send(control)
- con.try(sent and sent >= 1, "failed to send control file")
- send_ack(con)
-end
-
-local function send_data(con,fh,size)
- local buf
- while size > 0 do
- buf,message = fh:read(8192)
- if buf then
- st = con.try(con.skt:send(buf))
- size = size - st
- else
- con.try(size == 0, "file size mismatch")
- end
- end
- recv_ack(con) -- note the double acknowledgement
- send_ack(con)
- recv_ack(con)
- return size
-end
-
-
---[[
-local control_dflt = {
- "H"..string.sub(socket.hostname,1,31).."\10", -- host
- "C"..string.sub(socket.hostname,1,31).."\10", -- class
- "J"..string.sub(filename,1,99).."\10", -- jobname
- "L"..string.sub(user,1,31).."\10", -- print banner page
- "I"..tonumber(indent).."\10", -- indent column count ('f' only)
- "M"..string.sub(mail,1,128).."\10", -- mail when printed user@host
- "N"..string.sub(filename,1,131).."\10", -- name of source file
- "P"..string.sub(user,1,31).."\10", -- user name
- "T"..string.sub(title,1,79).."\10", -- title for banner ('p' only)
- "W"..tonumber(width or 132).."\10", -- width of print f,l,p only
-
- "f"..file.."\10", -- formatted print (remove control chars)
- "l"..file.."\10", -- print
- "o"..file.."\10", -- postscript
- "p"..file.."\10", -- pr format - requires T, L
- "r"..file.."\10", -- fortran format
- "U"..file.."\10", -- Unlink (data file only)
-}
-]]
-
--- generate a varying job number
-local seq = 0
-local function newjob(connection)
- seq = seq + 1
- return math.floor(socket.gettime() * 1000 + seq)%1000
-end
-
-
-local format_codes = {
- binary = 'l',
- text = 'f',
- ps = 'o',
- pr = 'p',
- fortran = 'r',
- l = 'l',
- r = 'r',
- o = 'o',
- p = 'p',
- f = 'f'
-}
-
--- lp.send{option}
--- requires option.file
-
-send = socket.protect(function(option)
- socket.try(option and base.type(option) == "table", "invalid options")
- local file = option.file
- socket.try(file, "invalid file name")
- local fh = socket.try(io.open(file,"rb"))
- local datafile_size = fh:seek("end") -- get total size
- fh:seek("set") -- go back to start of file
- local localhost = socket.dns.gethostname() or os.getenv("COMPUTERNAME")
- or "localhost"
- local con = connect(localhost, option)
--- format the control file
- local jobno = newjob()
- local localip = socket.dns.toip(localhost)
- localhost = string.sub(localhost,1,31)
- local user = string.sub(option.user or os.getenv("LPRUSER") or
- os.getenv("USERNAME") or os.getenv("USER") or "anonymous", 1,31)
- local lpfile = string.format("dfA%3.3d%-s", jobno, localhost);
- local fmt = format_codes[option.format] or 'l'
- local class = string.sub(option.class or localip or localhost,1,31)
- local _,_,ctlfn = string.find(file,".*[%/%\\](.*)")
- ctlfn = string.sub(ctlfn or file,1,131)
- local cfile =
- string.format("H%-s\nC%-s\nJ%-s\nP%-s\n%.1s%-s\nU%-s\nN%-s\n",
- localhost,
- class,
- option.job or "LuaSocket",
- user,
- fmt, lpfile,
- lpfile,
- ctlfn); -- mandatory part of ctl file
- if (option.banner) then cfile = cfile .. 'L'..user..'\10' end
- if (option.indent) then cfile = cfile .. 'I'..base.tonumber(option.indent)..'\10' end
- if (option.mail) then cfile = cfile .. 'M'..string.sub((option.mail),1,128)..'\10' end
- if (fmt == 'p' and option.title) then cfile = cfile .. 'T'..string.sub((option.title),1,79)..'\10' end
- if ((fmt == 'p' or fmt == 'l' or fmt == 'f') and option.width) then
- cfile = cfile .. 'W'..base.tonumber(option,width)..'\10'
- end
-
- con.skt:settimeout(option.timeout or 65)
--- send the queue header
- send_queue(con, option.queue)
--- send the control file header
- local cfilecmd = string.format("\2%d cfA%3.3d%-s\n",string.len(cfile), jobno, localhost);
- send_hdr(con,cfilecmd)
-
--- send the control file
- send_control(con,cfile)
-
--- send the data file header
- local dfilecmd = string.format("\3%d dfA%3.3d%-s\n",datafile_size, jobno, localhost);
- send_hdr(con,dfilecmd)
-
--- send the data file
- send_data(con,fh,datafile_size)
- fh:close()
- con.skt:close();
- return jobno, datafile_size
-end)
-
---
--- lp.query({host=,queue=printer|'*', format='l'|'s', list=})
---
-query = socket.protect(function(p)
- p = p or {}
- local localhost = socket.dns.gethostname() or os.getenv("COMPUTERNAME")
- or "localhost"
- local con = connect(localhost,p)
- local fmt
- if string.sub(p.format or 's',1,1) == 's' then fmt = 3 else fmt = 4 end
- con.try(con.skt:send(string.format("%c%s %s\n", fmt, p.queue or "*",
- p.list or "")))
- local data = con.try(con.skt:receive("*a"))
- con.skt:close()
- return data
-end)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 00:23:08 +0000