diff options
Diffstat (limited to 'Build/source/texk/dvisvgm/dvisvgm-1.1/doc/dvisvgm.txt.in')
-rw-r--r-- | Build/source/texk/dvisvgm/dvisvgm-1.1/doc/dvisvgm.txt.in | 607 |
1 files changed, 607 insertions, 0 deletions
diff --git a/Build/source/texk/dvisvgm/dvisvgm-1.1/doc/dvisvgm.txt.in b/Build/source/texk/dvisvgm/dvisvgm-1.1/doc/dvisvgm.txt.in new file mode 100644 index 00000000000..7e8da44034a --- /dev/null +++ b/Build/source/texk/dvisvgm/dvisvgm-1.1/doc/dvisvgm.txt.in @@ -0,0 +1,607 @@ +////////////////////////////////////////////////////////////////////////// +// This file is part of dvisvgm -- the DVI to SVG converter // +// Copyright (C) 2005-2013 Martin Gieseking <martin.gieseking@uos.de> // +// // +// This program is free software; you can redistribute it and/or // +// modify it under the terms of the GNU General Public License as // +// published by the Free Software Foundation; either version 3 of // +// the License, or (at your option) any later version. // +// // +// This program is distributed in the hope that it will be useful, but // +// WITHOUT ANY WARRANTY; without even the implied warranty of // +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // +// GNU General Public License for more details. // +// // +// You should have received a copy of the GNU General Public License // +// along with this program; if not, see <http://www.gnu.org/licenses/>. // +////////////////////////////////////////////////////////////////////////// + +dvisvgm(1) +========== +Martin Gieseking <@PACKAGE_BUGREPORT@> +:man source: dvisvgm +:man version: @VERSION@ +:man manual: dvisvgm Manual + +NAME +---- +dvisvgm - converts DVI files to the XML-based SVG format + + +SYNOPSIS +-------- +*dvisvgm* [ 'options' ] 'file' [.dvi] + + +DESCRIPTION +----------- +The command-line utility *dvisvgm* converts DVI files, as generated by TeX/LaTeX, to the +XML-based scalable vector graphics format SVG. Since the current SVG standard 1.1 doesn't +specify multi-page graphics, dvisvgm creates separate SVG files for each DVI page. +Because of compatibility reasons, only the first page is converted by default. In order +to select a different page or arbitrary page sequences, use option *-p* which is described below. + +dvisvgm should properly convert all pages that are made up of fonts and rules only. +However, the utility also supports a couple of DVI extensions defined in terms of 'DVI specials'. +For a more detailed overview, see section *support of specials* below. + +As SVG is a vector based graphics format, dvisvgm tries to convert the glyph +outlines of all used fonts into scalable path descriptions. The fastest way to do that +is to extract the path information from PFB (PostScript Type 1) files. So, if dvisvgm is able +to find a PFB file for a required font, it will read the necessary information from this file. + +TeX's main source for font descriptions is Metafont though, which produces bitmap output. That's why +not all obtainable TeX fonts are available in PFB format. In these cases, dvisvgm tries +to vectorize Metafont's output (GF fonts) by tracing the glyph bitmaps. The results are not +as perfect as most (manually optimized) PFB outlines but are nonetheless really nice in most cases. + + +OPTIONS +------- +*-a, --trace-all*=['retrace']:: +This option forces dvisvgm to trace not only the actually needed glyphs but all +glyphs of all bitmap fonts used in the DVI file. Since the tracing results are stored in +the font cache, all following DVI conversions (without option *--trace-all*) where these +fonts are involved, will be much faster. By default, dvisvgm traces only the actually +needed glyphs, and adds them to the cache. +The boolean option 'retrace' determines how to handle glyphs already stored in the cache. +By default, these glyphs are skipped. Setting argument 'retrace' to 'yes' or +'true' forces dvisvgm to trace the corresponding bitmaps again. ++ +[NOTE] +This option only takes affect if font caching is active. Thus, *--trace-all* cannot be +combined with option *--cache=none*. ++ + + +*-b, --bbox*='fmt':: +Sets the bounding box of the generated graphic to the specified format. The parameter 'fmt' +takes either one of the format specifiers listed below, or a sequence of four comma- or +whitespace-separated length values 'x1', 'y1', 'x2' and 'y2'. The latter define two diagonal +corners of the bounding box. Each length value consists of a floating point number and an optional +length unit (pt, bp, cm, mm, in, or pc). If the unit is omitted, TeX points (pt) are assumed. ++ +It's also possible to give only one length value 'l'. In this case, the minimal bounding box +is computed and enlarged by adding (-'l',-'l') to the upper left and ('l','l') to the lower +right corner. ++ +Alternatively, the following format specifiers are supported: + + *International DIN/ISO paper sizes*;; + A__n__, B__n__, C__n__, D__n__, where 'n' is a non-negative integer, e.g. A4 or a4 for DIN/ISO A4 + format (210mm × 297mm). + + *North American paper sizes*;; + invoice, executive, legal, letter, ledger + + *Special bounding box sizes*;; +[horizontal] + *dvi*::: page size stored in the DVI file + *min*::: computes the minimal/tightest bounding box + *none*::: no bounding box is assigned + +// + *Page orientation*;; + The default page orientation for DIN/ISO and American paper sizes is 'portrait', + i.e. 'width' < 'height'. Appending *-landscape* or simply *-l* to the format + string switches to 'landscape' mode ('width' > 'height'). For symmetry reasons you can + also explicitly add *-portrait* or *-p* to indicate the default portrait format. + Note that these suffixes are part of the size string and not separate options. Thus, + they must directly follow the size specifier without additional blanks. + Furthermore, the orientation suffixes can't be used with *dvi*, *min*, and *none*. ++ +[NOTE] +Option *-b, --bbox* only affects the bounding box and does not transform the page content. +Hence, if you choose a landscape format, the page won't be rotated. ++ +// + +// +*-c, --scale*='sx'[,'sy']:: +Scales the page content horizontally by 'sx' and vertically by 'sy'. This option is equivalent +to *-TS*'sx','sy'. + + +*-C, --cache*[='dir']:: +To speed up the conversion process of bitmap fonts, dvisvgm saves intermediate conversion +information in cache files. By default, these files are stored in $HOME/.dvisvgm/cache. If you prefer +a different location, use option *--cache* to overwrite the default. Furthermore, it is also possible +to disable the font caching mechanism completely with option *--cache=none*. If argument 'dir' is omitted, +dvisvgm prints the path of the default cache directory and some information about the stored fonts. +Additionally, outdated and corrupted cache files are removed. + + +*--color*:: +Enables colorization of messages printed during the conversion process. The colors can be customized +via the environment variable +DVISVGM_COLORS+. See the ENVIRONMENT section below for further information. + + +*-e, --exact*:: +If this option is given, dvisvgm computes the precise bounding box of each character. By default, +the values stored in a font's TFM file are used to determine a glyph's extent. As these values are +intended to realize optimal character placements and are not designed to represent the exact dimensions, +they don't necessarily correspond with the bounds of the visual glyphs. Thus, width and/or height +of some glyphs may be larger than the respective TFM values. As a result, this can lead to clipped +characters at the bounds of the SVG graphic. With option *--exact*, dvisvgm analyzes the actual shape +of each character and derives a usually tight bounding box. + + +*-m, --fontmap*='filenames':: +Loads and evaluates a single or multiple font map files. These files are required to resolve +font file names and encodings. dvisvgm does not provide its own map file but tries to read +available ones coming with dvips or dvipdfm. If option *--fonrmapm* is not given, dvisvgm looks for the +default map files +ps2pk.map+, +dvipdfm.map+, and +psfonts.map+ (in this order). Otherwise, the +listed files are used. Multiple filenames must be separated by commas without leading and/or trailing +whitespace. +The map files are evaluated in the given order. By default, redefined mappings do not replace previous ones. +However, each filename can be preceded by an optional mode specifier (*+*, *-*, or *=*) to change this behavior: + + +mapfile;; + Only those entries in the given map file that don't redefine a font mapping are applied. + That's also the default mode if no mode specifier is given. + + -mapfile;; + Ensures that none of the font mappings defined in the given map file are used, i.e. previously + defined mappings for the specified fonts are removed. + + =mapfile;; + All mappings defined in the map file are applied. Previously defined settings for the same font + are replaced. ++ +If the first filename in the filename sequence is preceded by a mode specifier, dvisvgm loads the +default font map (see above) and applies the other map files afterwards. Otherwise, none of default +map files will be loaded automatically. ++ +Examples: *--fontmap=myfile1.map,+myfile2.map* loads `myfile1.map` followed by `myfile2.map` where all +redefinitions of `myfile2.map` are ignored. +*--fontmap==myfile1.map,-myfile2.map* loads the default map file followed by `myfile1.map` and `myfile2.map` +where all redefinitions of `myfile1.map` replace previous entries. Afterwards, all definitions for the fonts +given in `myfile2.map` are removed again. ++ +For further information about the map file formats, see the manuals of dvips and dvipdfm. + + +*-h, --help*:: +Prints a short summary of all available command-line options. +This is also the default action if dvisvgm is called without parameters. + + +*--libgs=filename*:: +This option is only available if the Ghostscript library is not directly linked to dvisvgm and if +PostScript support was not completely disabled during compilation. In this case, dvisvgm tries +to load the shared GS library dynamically during runtime. By default, it expects the library's name +to be libgs.so (on Unix-like systems) or gsdll32.dll/gsdll64.dll (Windows). Option *--libgs* can be +used to give a different name. Alternatively, it's also possible to set the GS library name by the +environment variable +LIBGS+. The latter has less precedence than the command-line option. + + +*-l, --list-specials*:: +Prints a list of registered special handlers and exits. Each handler processes a set of special +statements belonging to the same category. In most cases, the categories are identified by the +prefix of the special statements. It's usually a leading word separated from the rest of the +statement by a colon or a blank, e.g. 'color' or 'ps'. + + +*--keep*:: +Disables the removal of temporary files as created by Metafont (usually .gf, .tfm, and .log files). + + +*-M, --mag*='factor':: +Sets the magnification factor applied in conjunction with Metafont calls prior tracing the glyphs. +The larger this value, the better the tracing results. Nevertheless, large magnification values +can cause Metafont arithmetic errors due to number overflows. So, use this option with care. +The default setting usually produces nice results. + + +*-n, --no-fonts*[='variant']:: +If this option is given, dvisvgm doesn't create SVG 'font' elements but uses 'paths' instead. The +resulting SVG files tends to be larger but concurrently more compatible with most applications that +don't support SVG fonts yet. The optional argument 'variant' selects the method how to substitute fonts +by paths. Variant 0 creates 'path' and 'use' elements. Variant 1 creates 'path' elements only. +Option *--no-fonts* implies *--no-styles*. + + +*-S, --no-specials*[='names']:: +Disable processing of special commands embedded in the DVI file. If no further +parameter is given, all specials are ignored. To selectively disable sets of specials, +an optional comma-separated list of names can be appended to this option. A 'name' is the unique +identifier referencing the intended special handler. Option *--list-specials* lists all currently +available handlers and their names. +All unsupported special statements are silently ignored. + + +*--no-styles*:: +By default, dvisvgm creates CSS styles and class attributes to reference fonts because it's more +compact than repeatedly set the complete font information in each text element. However, if you +prefer direct font references, the default behavior can be disabled with option *--no-styles*. + + +*--no-mktexmf*:: +Suppresses the generation of missing font files. If dvisvgm can't find a font file +through the kpathsea lookup mechanism, it calls the external tools mktextfm or mktexmf by. +This option disables these calls. + + +*-o, --output*='pattern':: +Sets the name pattern of the output file. Parameter 'pattern' is a string that may +contain the variables *%f* and *%p*. *%f* stands for the base name of the DVI file, i.e. +the DVI filename without suffix, and *%p* is the current page number. +The default pattern is *%f-%p.svg* if the DVI file consists of more than one page, and +*%f.svg* otherwise. That means, a DVI file 'foo.dvi' is converted to 'foo.svg' if 'foo.dvi' +is a single-page document. Otherwise, multiple SVG files 'foo-01.svg', 'foo-02.svg', etc. are +produced. In Windows environments, the percent sign indicates dereferenced environment +variables, and must therefore be protected by a second percent sign, e.g. *--output=%%f-%%p*. + + +*-p, --page*='ranges':: +This option sets the pages to be processed. Parameter 'ranges' consists of a comma-separated list +of single page numbers and/or page ranges. A page range is a pair of numbers separated by a hyphen, +e.g. 5-12. Thus, a page sequence might look like this: 2-4,6,9-12,15. It doesn't matter if a page +is given more than once or if page ranges overlap. dvisvgm always extracts the page numbers in +ascending order and converts them only once. +In order to stay compatible with previous versions, the default page sequence is 1. dvisvgm +therefore converts only the first page and not the whole document in case option *--page* is omitted. +Usually, page ranges consist of two numbers denoting the first and last page to be converted. +If the conversion is to be started at page 1, or if it should continue up to the last DVI page, the +first or second range number can be omitted, respectively. Example: *--page=-10* converts all +pages up to page 10, *--page=10-* converts all pages starting with page 10. +Please consider that the page values don't refer to the page numbers printed on the page. +Instead, the physical page count is expected, where the first page always gets number 1. + + +*-P, --progress*[='delay']:: +Enables a simple progress indicator shown when time-consuming operations like +PostScript specials are processed. The indicator doesn't appear before the given +delay (in seconds) has elapsed. The default delay value is 0.5 seconds. + + +*-r, --rotate*='angle':: +Rotates the page content clockwise by 'angle' degrees around the page center. +This option is equivalent to *-TR*'angle'. + + +*-s, --stdout*:: +Don't write the SVG output to a file but redirect it to *stdout*. + + +*-t, --translate*='tx'[,'ty']:: +Translates (moves) the page content in direction of vector ('tx','ty'). This option is +equivalent to *-TT*'tx','ty'. + + +*-T, --transform*='commands':: +Applies a sequence of transformations to the SVG content. Each transformation is described +by a 'command' beginning with a capital letter followed by a list of comma-separated +parameters. Following transformation commands are supported: + + *T* 'tx'[,'ty'];; + Translates (moves) the page in direction of vector ('tx','ty'). If 'ty' is omitted, + 'ty'=0 is assumed. + The expected unit length of 'tx' and 'ty' are TeX points (1pt = 1/72.27in). However, there + are several constants defined to simplify the unit conversion (see below). + + *S* 'sx'[,'sy'];; + Scales the page horizontally by 'sx' and vertically by 'sy'. If 'sy' is omitted, + 'sy'='sx' is assumed. + + *R* 'angle'[,'x','y'];; + Rotates the page clockwise by 'angle' degrees around point ('x','y'). If the optional + arguments 'x' and 'y' are omitted, the page will be rotated around its center depending on + the chosen page format. When option *-bnone* is given, the rotation center is origin (0,0). + + *KX* 'angle';; + Skews the page along the 'x'-axis by 'angle' degrees. Argument 'angle' can take any value + except 90+180__k__, where 'k' is an integer. + + *KY* 'angle';; + Skews the page along the 'y'-axis by 'angle' degrees. Argument 'angle' can take any value + except 90+180__k__, where 'k' is an integer. + + *FH* ['y'];; + Mirrors (flips) the page at the horizontal line through point (0,'y'). Omitting the optional argument + leads to 'y'='h'/2, where 'h' denotes the page height (see 'pre-defined constants' below). + + *FV* ['x'];; + Mirrors (flips) the page at the vertical line through point ('x',0). Omitting the optional argument + leads to 'x'='w'/2, where 'w' denotes the page width (see 'pre-defined constants' below). + + *M* 'm1',...,'m6';; + Applies a transformation described by the 3×3 matrix + \(('m1','m2','m3'),('m4','m5','m6'),(0,0,1)), where the inner triples denote + the rows. ++ +[NOTE] +================================================================================================= +All transformation commands of option *-T, --transform* are applied in the order of their appearance. +Multiple commands can optionally be separated by spaces. In this case the whole transformation string +has to be enclosed in double quotes. All parameters are expressions of floating point type. You can either +give plain numbers or arithmetic terms combined by the operators *+* (addition), *-* (subtraction), +*** (multiplication), */* (division) or *%* (modulo) with common associativity and +precedence rules. Parentheses may be used as well. + +Additionally, some pre-defined constants are provided: + +[horizontal] +*ux*:: horizontal position of upper left page corner in TeX point units +*uy*:: vertical position of upper left page corner in TeX point units +*h*:: page height in TeX point units (0 in case of *-bnone*) +*w*:: page width in TeX point units (0 in case of *-bnone*) + +Furthermore, you can use the length constants *pt*, *mm*, *cm* and *in*, e.g. ++2cm+ or +1.6in+. Thus, option +-TT1in,0R45+ moves the page content 1 inch to the right and rotates it +by 45 degrees around the page center afterwards. + +For single transformations you can also use options *-c*, *-t* and *-r*. Note that +the order in which these options are given is not significant, i.e. you can't use them to describe +transformation sequences. They are simply independent shorthand options for common transformations. + +================================================================================================= ++ +// + +// +*-v, --verbosity*='level':: +Controls the type of messages printed during a dvisvgm run: +[horizontal] + *0*;; no message output + *1*;; error messages only + *2*;; warning messages only + *4*;; informational messages only + ++ +[NOTE] +By adding these values you can combine the categories. The default level is 7, i.e. all +messages are printed. ++ + + +*-V, --version*[='extended']:: +Prints the version of dvisvgm and exits. If the optional argument is set to 'yes', the +version numbers of the linked libraries are printed as well. + + +*-z, --zip*[='level']:: +Creates a compressed SVG file with suffix .svgz. The optional argument specifies the compression +level. Valid values are in the range of 1 to 9 (default value is 9). Larger values cause better +compression results but take more computation time. ++ +CAUTION: This option cannot be combined with *-s, --stdout*. + + +SUPPORT OF SPECIALS +------------------- +dvisvgm supports several sets of 'special commands' that can be used to enrich DVI files with additional +features, like color, graphics or hyperlinks. The evaluation of special commands is delegated to various handlers. +Each handler is responsible for all special statements of the same command set, i.e. commands beginning +with the same prefix. To get a list of actually provided special handlers, use option *--list-specials* (see above). + +*bgcolor*:: +Special statement for changing the background/page color. Since SVG 1.1 doesn't support background colors, +dvisvgm inserts a rectangle of the chosen color. In the current version, this rectangle always gets the size +of the minimal bounding box. This command is part of the color special set but is handled separately in order +to let the user turn it off. For an overview of the command syntax, see the documentation of dvips, for instance. + +*color*:: +Statements of this command set provide instructions to change the text/paint color. For an overview of the +exact syntax, see the documentation of dvips, for instance. + +*dvisvgm*:: +dvisvgm offers its own small set of specials. The following list gives a brief overview. + *dvisvgm:raw* 'text';; + Adds an arbitrary sequence of characters to the SVG output. dvisvgm does not perform any validation here, + thus the user has to ensure that the resulting SVG is still valid. Parameter 'text' may + contain the macros *{?x}*, *{?y}*, and *{?color}* that are expanded to the current 'x' or 'y' coordinate + and the current color, respectively. Also, macro *{?nl}* expands to a newline character. + + *dvisvgm:img* 'width' 'height' 'file';; + Creates an image element at the current graphic position referencing the given file. JPEG, PNG, and SVG images + can be used here. However, dvisvgm does not check the file format or the file name suffix. The lengths 'width' + and 'height' must be given as plain floating point numbers in TeX point units (1in = 72.27pt). + + *dvisvgm:bbox* n[ew] 'name';; + Defines or resets a local bounding box called 'name'. The name may consist of letters and digits. + While processing a DVI page, dvisvgm continuously updates the (global) bounding box of the current page in order to + determine the minimal rectangle containing all visible page components (characters, images, drawing elements etc.) + Additionally to the global bounding box, the user can request an arbitrary number of named local bounding boxes. + Once defined, these boxes are updated together with the global bounding box starting with the first character that + follows the definition. Thus, the local boxes can be used to compute the extent of parts of the page. This is useful + for scenarios where the generated SVG file is post-processed. + In conjunction with special dvisvgm:raw, the macro *{?bbox 'name'}* expands to the four values 'x', 'y', 'w', and 'h' + (separated by spaces) specifying the coordinates of the upper left corner, width, and height of the local box 'name'. + If box 'name' wasn't previously defined, all four values equal zero. + + *dvisvgm:bbox* 'width' 'height' ['depth'];; + Updates the bounding box of the current page by embedding a virtual rectangle ('x', 'y', 'width', 'height') + where the lower left corner is located at the current DVI drawing position ('x','y'). If the optional parameter 'depth' + is specified, dvisvgm embeds a second rectangle ('x', 'y', 'width', -__depth__). The lengths 'width', 'height' and + 'depth' must be given as plain floating point numbers in TeX point units (1in = 72.27pt). Depending on size and position + of the virtual rectangle, this command either enlarges the overall bounding box or leaves it as is. It's not possible + to reduce its extent. This special should be used in conjunction with *dvisvgm:raw* in order to update the viewport + of the page properly. + + *dvisvgm:bbox* a[bs] 'x1' 'y1' 'x2' 'y2';; + This variant of the bbox special updates the bounding box by embedding a virtual rectangle ('x1','y1','x2','y2'). + The points ('x1','y1') and ('x2','y2') denote two diagonal corners of the rectangle given in TeX point units. + + *dvisvgm:bbox* f[ix] 'x1' 'y1' 'x2' 'y2';; + This variant of the bbox special assigns an absolute (final) bounding box to the resulting SVG. After executing + this command, dvisvgm doesn't further alter the bounding box coordinates, except this special is called again later. + The points ('x1','y1') and ('x2','y2') denote two diagonal corners of the rectangle given in TeX point units. ++ +The following TeX snippet adds two raw SVG elements to the output and updates the bounding box accordingly: ++ +------------------------------------------------------------------------------------ +\special{dvisvgm:raw <circle cx='{?x}' cy='{?y}' r='10' stroke='black' fill='red'/>} +\special{dvisvgm:bbox 20 10 10} + +\special{dvisvgm:raw <path d='M50 200 L10 250 H100 Z' stroke='black' fill='blue'/>} +\special{dvisvgm:bbox abs 10 200 100 250} +------------------------------------------------------------------------------------ ++ + +*em*:: +These specials were introduced with the emTeX distribution by Eberhard Mattes. They provide line drawing +statements, instructions for embedding MSP, PCX, and BMP image files, as well as two PCL commands. +dvisvgm supports only the line drawing statements and ignores all other em specials silently. +A description of the command syntax can be found in the DVI driver documentation coming with emTeX (see CTAN). + +// *html*:: +// The hyperref package uses a set of HTML anchor tags to indicate hyperlinks in DVI files. +// dvisvgm converts them to corresponding SVG elements. + +*pdf*:: +pdfTeX and dvipdfmx introduced several special commands related to the generation of PDF files. Currently, only +two of them, 'pdf:mapfile' and 'pdf:mapline' are supported by dvisvgm. These specials allow modifying the font map +tree during the processing of DVI files. They are used by CTeX, for example. dvisvgm supports both, the dvips and +dvipdfm font map format. For further information on the command syntax and semantics, see the documentation of +\pdfmapfile in the pdfTeX user manual. + +*ps*:: +The famous DVI driver dvips introduced its own set of specials in order to embed PostScript code into DVI files, +which greatly improves the capabilities of DVI documents. One aim of dvisvgm is to completely evaluate all +PostScript snippets and to convert a large amount of it to SVG. However, in contrast to dvips, dvisvgm uses floating point +arithmetics to compute the precise position of each graphic element, i.e. it doesn't round the coordinates. Therefore, +the relative locations of the graphic elements may slightly differ from those computed by dvips. ++ +Since PostScript is a rather complex language, dvisvgm does not try to implement its own PostScript interpreter but relies on +Ghostscript instead. If the Ghostscript library was not linked while building dvisvgm, it is looked up and loaded dynamically +during runtime. In this case, dvisvgm looks for 'libgs.so' on Unix-like systems, and for 'gsdll32.dll' or 'gsdll64.dll' on Windows. +You can override these default file names with environment variable +LIBGS+ or the command-line option *--libgs*. +The library must be installed and reachable through the ld search path (\*nix) or the PATH environment +variable (Windows). If it cannot be found, the processing of PostScript specials is disabled. +Use option *--list-specials* to check whether PS support is available, i.e. the entry 'ps' is present. + +*tpic*:: +The TPIC special set defines instructions for drawing simple geometric objects. Some LaTeX packages, like +eepic and tplot, use these specials to describe graphics. + + +EXAMPLES +-------- +-------------- +dvisvgm file +-------------- +Converts the first page of 'file.dvi' to 'file.svg'. + +--------------- +dvisvgm -z file +--------------- +Converts the first page of 'file.dvi' to 'file.svgz' with default compression level 9. + +------------------------------------- +dvisvgm -p5 -z3 -ba4-l -onewfile file +------------------------------------- +Converts the fifth page of 'file.dvi' to 'newfile.svgz' with compression level 3. +The bounding box is set to DIN/ISO A4 in landscape format. + +----------------------------------------------------- +dvisvgm --transform="R20,w/3,2h/5 T1cm,1cm S2,3" file +----------------------------------------------------- +Converts the first page of 'file.dvi' to 'file.svg' where three transformations are applied. + + +ENVIRONMENT +----------- +dvisvgm uses the *kpathsea* library for locating the files that it opens. +Hence, the environment variables described in the library's documentation influence the converter. + +If dvisvgm was linked without the Ghostscript library, and if PostScript support has not been disabled, +the shared Ghostscript library is looked up during runtime via dlopen(). The environment variable +LIBGS+ +can be used to specify path and file name of the library. + +The pre-compiled Windows versions of dvisvgm require a working installation of MiKTeX 2.9 or above. +dvisvgm does not work together with the portable edition of MiKTeX because it relies on MiKTeX's COM +interface only accessible in a local installation. +To enable the evaluation of PostScript specials, the original Ghostscript DLL 'gsdll32.dll' must be present +and reachable through the search path. 64-bit Windows builds require the 64-bit Ghostscript DLL 'gsdll64.dll'. +Both DLLs come with the corresponding Ghostscript installers available from www.ghostscript.com. + +The environment variable +DVISVGM_COLORS+ specifies the colors used to highlight various parts of dvisvgm's +message output. It is only evaluated if option *--color* is given. The value of +DVISVGM_COLORS+ is a list of +colon-separated entries of the form 'gg'='BF', where 'gg' denotes one of the color group indicators listed +below, and 'BF' are two hexadecimal digits specifying the background (first digit) and foreground/text color +(second digit). The color color values are defined as follows: 0=black, 1=red, 2=green, 3=yellow, 4=blue, +5=magenta, 6=cyan, 7=gray, 8=bright red, 9=bright green, A=bright yellow, B=bright blue, C=bright magenta, +D=bright cyan, E=bright gray, F=white. Depending on the terminal, the colors may differ. Rather than changing +both the text and background color, it's also possible to change only one of them: An asterisk (*) in +place of a hexadecimal digit indicates the default text or background color of the terminal. + +All malformed entries in the list are silently ignored. + +[horizontal] +*er*:: error messages +*wn*:: warning messages +*pn*:: messages about page numbers +*ps*:: page size messages +*fw*:: information about the files written +*sm*:: state messages +*tr*:: messages of the glyph tracer +*pi*:: progress indicator + +*Example:* +er=01:pi=\*5+ sets the colors of error messages (+er+) to red (+1+) on black (+0+), and those +of progress indicators (+pi+) to cyan (+5+) on default background (+*+). + +FILES +----- +The location of the following files is determined by the kpathsea library. +To check the actual kpathsea configuration you can use the *kpsewhich* utility. + +[horizontal] +**.enc*:: Font encoding files +**.fgd*:: Font glyph data files (cache files created by dvisvgm) +**.map*:: Font map files +**.mf*:: Metafont input files +**.pfb*:: PostScript Type 1 font files +**.pro*:: PostScript header/prologue files +**.tfm*:: TeX font metric files +**.ttf*:: TrueType font files +**.vf*:: Virtual font files + +SEE ALSO +-------- +*tex(1), mf(1), mktexmf(1), grodvi(1), potrace(1)*, and the *kpathsea library* info documentation. + + +RESOURCES +--------- +Project home page::: http://dvisvgm.sourceforge.net +SourceForge project site::: http://sourceforge.net/projects/dvisvgm + + +BUGS +---- +Please report bugs using the bug tracker at Launchpad (see https://launchpad.net/dvisvgm). + + +AUTHOR +------ +Written by {author} <{email}> + + +COPYING +------- +Copyright (C) 2005-2013 Martin Gieseking. Free use of this software is +granted under the terms of the GNU General Public License (GPL) version 3 +or, (at your option) any later version. + +// vim: set syntax=asciidoc: |