summaryrefslogtreecommitdiff
path: root/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest
diff options
context:
space:
mode:
Diffstat (limited to 'Build/source/libs/libpng/libpng-1.6.9/contrib/conftest')
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/README49
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/read.dfa58
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_read.dfa35
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_write.dfa33
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/simple.dfa36
-rw-r--r--Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/write.dfa45
6 files changed, 256 insertions, 0 deletions
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/README b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/README
new file mode 100644
index 00000000000..0f472791f27
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/README
@@ -0,0 +1,49 @@
+This directory contains test configuration files, currently always '.dfa' files
+intended to be used in the build by setting the make macro DFA_XTRA to the name
+of the file.
+
+These files are used in release validation of the 'configure' builds of libpng
+by building 'make check', or 'make all-am' for cross-builds, with each .dfa
+file.
+
+The files in this directory may change between minor releases, however
+contributions describing specific builds of libpng are welcomed. There is no
+guarantee that libpng will continue to build with such configurations; support
+for given configurations can be, and has been, dropped between successive minor
+releases. However if a .dfa file describing a configuration is not in this
+directory it is very unlikely that it will be tested before a minor release!
+
+You can use these .dfa files as the basis of new configurations. Files in this
+directory should not have any use restrictions or restrictive licenses.
+
+This directory is not included in the .zip and .7z distributions, which do
+not contain 'configure' scripts.
+
+DOCUMENTATION
+=============
+
+Examples:
+ ${srcdir}/pngusr.dfa
+ ${srcdir}/contrib/pngminim/*/pngusr.dfa
+
+Documentation of the options:
+ ${srcdir}/scripts/pnglibconf.dfa
+
+Documentation of the file format:
+ ${srcdir}/scripts/options.awk
+
+FILE NAMING
+===========
+
+File names in this directory may NOT contain any of the five characters:
+
+ - , + * ?
+
+Neither may they contain any space character.
+
+While other characters may be used it is strongly suggested that file names be
+limited to lower case Latiin alphabetic characters (a-z), digits (0-9) and, if
+necessary the underscore (_) character. File names should be about 8 characters
+long (excluding the .dfa extension). Submitted .dfa files should have names
+between 7 and 16 characters long, shorter names (6 characters or less) are
+reserved for standard tests.
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/read.dfa b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/read.dfa
new file mode 100644
index 00000000000..21e88d01a21
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/read.dfa
@@ -0,0 +1,58 @@
+# read.dfa
+# Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work. This work is published from:
+# United States.
+#
+# Build libpng with basic read support. This enables the lowest level libpng
+# read API - the one where the calling code has to use a loop to read each row.
+# At present this is the API used by most programs.
+#
+# Support is enabled only for those chunks and transformations that are
+# typically required - others can be added easily.
+#
+
+everything = off
+
+# The sequential read code is enabled here; the progressive code can be used
+# instead but there is no point enabling both.
+
+option SEQUENTIAL_READ on
+
+# Likewise it is pointless enabling both fixed and floating point APIs. Choose
+# one or the other for both the API and the internal math.
+
+#Fixed point:
+#option FIXED_POINT on
+#option FLOATING_ARITHMETIC off
+
+#Floating point:
+option FLOATING_POINT on
+option FLOATING_ARITHMETIC on
+
+# Basic error handling, IO and user memory support. The latter allows the
+# application program to provide its own implementations of 'malloc' and 'free'.
+option SETJMP on
+option STDIO on
+option USER_MEM on
+
+# To read the full set of PNG images correctly interlace, transparency and
+# 16-bit support is required. The application can implement interlace itself,
+# but very few do and it's no longer possible to disable it when READ is
+# enabled.
+option READ_tRNS on
+option READ_16BIT on
+
+# Everything else is application dependent. This file assumes the app handles
+# all the native PNG bit layouts, so it doesn't need any of layout change
+# transforms, but needs libpng to perform gamma correction. It doesn't do any
+# colorspace stuff and ignores the 'significant bit' information.
+#
+# If your app always expands the image to a limited set of bit layouts you
+# probably want to consider using the simplified API instead of the low level
+# one - see png.h and s_read.dfa.
+option READ_GAMMA on
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_read.dfa b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_read.dfa
new file mode 100644
index 00000000000..cb1ce0ba65f
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_read.dfa
@@ -0,0 +1,35 @@
+# s_read.dfa
+# Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work. This work is published from:
+# United States.
+#
+# Build libpng with simplified read support (only). This builds a minimal
+# libpng able to read all PNG formats and convert them into a small number of
+# well understood memory formats.
+#
+
+everything = off
+
+option SIMPLIFIED_READ on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers. It is necessary
+# to chose an internal math implementation. The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_READ_AFIRST on
+option SIMPLIFIED_READ_BGR on
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_write.dfa b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_write.dfa
new file mode 100644
index 00000000000..e540a46dc8b
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/s_write.dfa
@@ -0,0 +1,33 @@
+# s_write.dfa
+# Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work. This work is published from:
+# United States.
+#
+# Build libpng with (just) simplified write support
+#
+
+everything = off
+
+option SIMPLIFIED_WRITE on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers. It is necessary
+# to chose an internal math implementation. The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_WRITE_AFIRST on
+option SIMPLIFIED_WRITE_BGR on
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/simple.dfa b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/simple.dfa
new file mode 100644
index 00000000000..04193334452
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/simple.dfa
@@ -0,0 +1,36 @@
+# simple.dfa
+# Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work. This work is published from:
+# United States.
+#
+# Build libpng with just the simplified APIs (read and write).
+#
+
+everything = off
+
+option SIMPLIFIED_WRITE on
+option SIMPLIFIED_READ on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers. It is necessary
+# to chose an internal math implementation. The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_READ_AFIRST on
+option SIMPLIFIED_READ_BGR on
+option SIMPLIFIED_WRITE_AFIRST on
+option SIMPLIFIED_WRITE_BGR on
diff --git a/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/write.dfa b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/write.dfa
new file mode 100644
index 00000000000..3319aabeeb3
--- /dev/null
+++ b/Build/source/libs/libpng/libpng-1.6.9/contrib/conftest/write.dfa
@@ -0,0 +1,45 @@
+# write.dfa
+# Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work. This work is published from:
+# United States.
+#
+# Build libpng with no read support and minimal write support.
+#
+
+everything = off
+
+# Switch on the write code - this makes a minimalist encoder
+
+option WRITE on
+
+# Choose fixed or floating point APIs and arithmetic. The choices are
+# independent but normally they will match. It is typically better to use the
+# floating point if you have floating point hardware. If you don't know, or
+# (perhaps) to make libpng smaller used fixed point throughout.
+
+#Fixed point:
+#option FIXED_POINT on
+#option FLOATING_ARITHMETIC off
+
+#Floating point:
+option FLOATING_POINT on
+option FLOATING_ARITHMETIC on
+
+# Basic error handling, IO and user memory support. The latter allows the
+# application program to provide its own implementations of 'malloc' and 'free'.
+option SETJMP on
+option STDIO on
+option USER_MEM on
+
+# Everything else is optional. Unlike the read code in libpng the write code
+# does not need to deal with arbitrary formats, so only add support for things
+# you really do write! For example you might only write sRGB images, sometimes
+# with transparency and never write 16 bit images, so:
+option WRITE_sRGB on
+option WRITE_tRNS on
+#option WRITE_16BIT off (this is the default with 'everything = off')