summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Master/texmf-dist/doc/latex/boxhandler/README40
-rw-r--r--Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdfbin224542 -> 238178 bytes
-rw-r--r--Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx748
-rw-r--r--Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty526
4 files changed, 786 insertions, 528 deletions
diff --git a/Master/texmf-dist/doc/latex/boxhandler/README b/Master/texmf-dist/doc/latex/boxhandler/README
index 5796322f19a..aeff54b5380 100644
--- a/Master/texmf-dist/doc/latex/boxhandler/README
+++ b/Master/texmf-dist/doc/latex/boxhandler/README
@@ -1,22 +1,28 @@
The boxhandler package
======================
-This package provides a powerful, yet simple, interface for managing and
-manipulating the captions of boxed objects (e.g., tables and figures).
-In addition to providing wide flexibility in the presentation style of
-the captions, this package, when used in combination with conditionally
-compiled LaTeX source codes, provides the ability to defer or preempt
-the presentation of figures, tables, and their associated lists.
-
-In this way, one can, for example, by changing a single line of source
-code in the .tex file, change the output of LaTeX from a technical
-report with tables and figures interspersed in the text, to a
-journal-manuscript submission, with figures collected at the end of
-document, as well as lof and lot deferred or preempted.
-
-These routines for table and figure deferral may also be employed to
-allow all your figure and table definitions to reside in a separate file
-and yet still print out in the proper location in the document.
+ Tools for Optimizing Captions, Presentation, and Placement
+ of Tables and Figures
+
+
+This package facilitates the optimized presentation of LaTeX tables and
+figures. Not only can boxhandler conveniently lay out table and figure
+captions with a wide variety of stylistic appearances, but allows for
+figures and tables to be ``wrapped'' in a manner consistent with many
+business and government documents.
+
+For a document that might appear in different venues with different
+formatting, boxhandler very powerfully permits the creation of a LaTeX
+source document that can, with a single-line change in the source code,
+produce an output that has vastly different layout from the baseline
+configuration, not only in terms of caption style, but more importantly
+in terms of the locations where figures, tables and lists appear (or
+not) in the document.
+
+Deferral routines also allow one to keep all figure and table data in a
+separate source file, while nonetheless producing a document with
+figures and tables appearing in the desired location in the document.
+
Run `boxhandler.ins' through LaTeX to produce boxhandler.sty
from boxhandler.dtx.
@@ -25,4 +31,4 @@ Run `boxhandler.dtx' through LaTeX to produce the documentation.
This program can be redistributed and/or modified, with attribution.
Steven Segletes <steven@arl.army.mil>
- 29 July 2006
+ 16 August 2008
diff --git a/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf b/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf
index e8eb5e3659f..def9585ce2b 100644
--- a/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf
+++ b/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx b/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx
index c9f692b48cf..644aab9c6e1 100644
--- a/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx
+++ b/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx
@@ -1,4 +1,4 @@
-% \CheckSum{726}
+% \CheckSum{930}
% \iffalse
%%
%% boxhandler.sty
@@ -10,8 +10,9 @@
%% arlcaptions.sty.
%%
%<package>\ProvidesPackage{boxhandler}
-%<package>[2006/07/29 v1.10
-%<package> Flexible Captioning Styles and Deferred Box/List Printing]
+%<package>[2008/08/16 v1.21
+%<package> Tools for Optimizing Captions, Presentation, and
+%<package> Placement of Tables and Figures]
%<package>\NeedsTeXFormat{LaTeX2e}
%<*driver>
% V1.02-Corrected minor grammar issue in documentation.
@@ -26,6 +27,12 @@
% a single table or figure at a time.
% -explained in documentation how to handle captions with
% citations in boxhandler environment.
+% V1.11-added RequirePackage{ifthen}, which should have been there
+% all along (got by, since pbox required it).
+% -corrected a typo.
+% V1.12-added % to end of every key line to prevent extraneous spaces.
+% V1.20-added support for figure and table wrappers
+% V1.21-modified documentation slightly
\documentclass{ltxdoc}
\usepackage{boxhandler}
\DisableCrossrefs
@@ -53,18 +60,22 @@
% \fi
% \parskip 1ex
% \begin{abstract}
-% This package facilitates the handling of \LaTeX{}
-% tables and figures, especially for conditionally compiled documents.
-% With these tools, not only can one conveniently define table and figure
-% captions with a wide variety of stylistic appearances, but one can
-% create a single \LaTeX{} document that can, with a single-line change
+% This package facilitates the optimized presentation of \LaTeX{}
+% tables and figures.
+% Not only can boxhandler conveniently lay out table and figure
+% captions with a wide variety of stylistic appearances, but allows
+% for figures and tables to be ``wrapped'' in a manner consistent with
+% many business and government documents. For a document that might
+% appear in different venues with different formatting, boxhandler
+% very powerfully permits the creation of a \LaTeX{} source
+% document that can, with a single-line change
% in the source code, produce an output that has vastly different layout
% from the baseline configuration, both in terms of caption style,
% and in terms of the locations where figures, tables and lists
-% appear (or not) in the document. The deferral routines also allow
-% one to keep all figure and table data in a separate file, which
-% nonetheless produces a document with figures and tables appearing
-% in the proper location in the document.
+% appear (or not) in the document. Deferral routines also allow
+% one to keep all figure and table data in a separate source file, while
+% nonetheless producing a document with figures and tables appearing
+% in the desired location in the document.
%
% \end{abstract}
%
@@ -161,7 +172,7 @@
% \ref{tbl:wide}. In the first table, the default minimum caption width
% of 1~inch is retained, resulting in an unwieldy caption. The second
% table has been printed following an invocation of
-% |\relaxCaptionWidth[4.0in]|. Using |\relaxcaption| with no argument
+% |\relaxCaptionWidth[4.0in]|. Using |\relaxCaptionWidth| with no argument
% resets the minimum allowed caption width to the default value of 1
% inch.
%
@@ -326,16 +337,6 @@
% bxfigure, and do not affect the |\abovecaptionskip| and
% |\belowcaptionskip| definitions intrinsic to your default document
% class.
-% \begin{picture} (0,0)
-% \put(-63,191){\makebox(20,0)[l]
-% {\small\tt\bs abovecaption-}}
-% \put(-63,182){\makebox(20,0)[l]
-% {\small~~|skipterm| = 3~~$\rightarrow$}}
-% \put(-90,164){\makebox(20,0)[l]
-% {\small\tt\bs FigureDeadMargin\rm = 1em~$\uparrow$}}
-% \put(-90,155){\makebox(20,0)[l]
-% {\small (1em on left; 1em on right)}}
-% \end{picture}
%
% \DescribeMacro{\CaptionFontSize}
% |\CaptionFontSize| defines the default size of the caption font, for
@@ -363,44 +364,102 @@
% caption box, the definition should be set to |\raggedright|. For the
% brave and daring, |\raggedleft| and/or |\centering| can be explored.
% Use |\def\CaptionJustification{}| to reset subsequent captions for full
-% flushing.
+% flushing.%
%
% Figure~\ref{fig:ragged} is provided to demonstrate some of these
% features including: caption justification (|\raggedright|), caption gap
% (2.5~ex), caption font size (|\scriptsize|), LR figure placement
% (|flushright|), |abovecaptionskipterm| (3), and a value for
% |\FigureDeadMargin| of 1em.
+% \clearpage%
+% \captionStyle{o}{l}%
+% \setlength\captionGap{2.5ex}%
+% \def\CaptionJustification{\raggedright}%
+% \let\CaptionFontSize\scriptsize%
+% \setcounter{abovecaptionskipterm}{3}%
+% \def\LRFigurePlacement{flushright}%
+% \setlength\FigureDeadMargin{1em}%
+% \bxfigure[t]{Here is one example of a caption that has been set for%
+% a ragged right justification. Justification, or ``flushing,''%
+% is different than caption alignment, which is specified%
+% independently and deals with how short captions are%
+% aligned with respect to the boxed object\label{fig:ragged}}%
+% {\framebox(263,60)%
+% {\parbox{3.5in}{Boxed Object:\\%
+% \small \hspace*{2.05in}%
+% |flushright| \textit{placement $\rightarrow$\\%
+% \hspace*{.17in} \uq 2.5ex \hspace*{0.45in}%
+% \tt\bs\rm|scriptsize|\iq\\%
+% caption gap \hfill caption font size \hfill%
+% \uq\tt\bs\rm{|raggedright|} \iq justification}\\%
+% \hspace*{.50in} $\downarrow$ \hfill $\downarrow$%
+% \hfill \hfill $\downarrow$~~~}%
+% }%
+% }%
+% \setlength\captionGap{1ex}%
+% \def\CaptionJustification{}%
+% \let\CaptionFontSize\small%
+% \setcounter{abovecaptionskipterm}{10}%
+% \def\LRFigurePlacement{center}%
+% \setlength\FigureDeadMargin{0em}%
+% \begin{picture} (0,0)%
+% \put(-4,95){\makebox(20,0)[l]%
+% {\small\tt\bs abovecaption-}}%
+% \put(-4,86){\makebox(20,0)[l]%
+% {\small~~|skipterm| = 3~~$\rightarrow$}}%
+% \put(-31,68){\makebox(20,0)[l]%
+% {\small\tt\bs FigureDeadMargin\rm = 1em~$\uparrow$}}%
+% \put(-31,59){\makebox(20,0)[l]%
+% {\small (1em on left; 1em on right)}}%
+% \end{picture}%
+% \section{Figure and Table ``Wrappers''}
+%
+% With \boxhandler v1.20, figure and table wrappers have been added.
+% A wrapper is here defined to mean an item that bounds a figure or
+% table by appearing in the upper-left and lower-right corners of
+% the figure or table. It could be an iconic image such as the company
+% logo, a reminder such as ``COMPANY PROPRIETARY'', or some other such
+% delimiter to the figure/table. The relevant commands to use them are
+% as follows:
+%
+% \begin{verse}
+% |\WrapperOn[|\iq default wrapper\uq|]|\\
+% |\WrapperOff|\\
+% |\Wrapper{|\iq custom wrapper\uq|}|\\
+% |\def\WrapperTextStyle{|\iq text style\uq|}|\\
+% \end{verse}
+%
+% By default, wrappers are turned off in boxhandler. They may be
+% activated with the command |\WrapperOn|. The optional argument to
+% |\WrapperOn|, which should be used on the initial invocation,
+% specifies the default wrapper. Likewise,
+% wrappers may be disabled with the command |\WrapperOff|. When wrappers
+% are activated, every table and figure subsequently created will be
+% wrapped using the default wrapper.
+%
+% If, however, the user would like
+% for a given figure or table to have a custom wrapper different than the
+% default, the |\Wrapper{}| command should be used within the second
+% mandatory argument of the call to |\bxtable| or |\bxfigure|. That is
+% to say, the call to |\Wrapper| should be included within the argument
+% where the actual figure or table contents are defined. Here is an
+% example
+%
+% \begin{verse}
+% |\bxfigure[h]{Widget details for the XMC-7936}%|\\
+% | {\fbox{\hspace{1in}\rule[-.5ex]{3ex}{3ex} $\rightarrow$%|\\
+% | \rule[-.2ex]{2ex}{2ex}\hspace{1in}}\Wrapper{PROPRIETARY}}%|\\
+% \end{verse}
%
-% \captionStyle{o}{l}
-% \setlength\captionGap{2.5ex}
-% \def\CaptionJustification{\raggedright}
-% \let\CaptionFontSize\scriptsize
-% \setcounter{abovecaptionskipterm}{3}
-% \def\LRFigurePlacement{flushright}
-% \setlength\FigureDeadMargin{1em}
-% \bxfigure[t]{Here is one example of a caption that has been set for
-% a ragged right justification. Justification, or ``flushing,''
-% is different than caption alignment, which is specified
-% independently and deals with how short captions are
-% aligned with respect to the boxed object\label{fig:ragged}}
-% {\framebox(263,60)
-% {\parbox{3.5in}{Boxed Object:\\
-% \small \hspace*{2.05in}
-% |flushright| \textit{placement $\rightarrow$\\
-% \hspace*{.17in} \uq 2.5ex \hspace*{0.45in}
-% \tt\bs\rm|scriptsize| \iq \\
-% caption gap \hfill caption font size \hfill
-% \uq\tt\bs\rm{|raggedright|} \iq justification}\\
-% \hspace*{.50in} $\downarrow$ \hfill $\downarrow$
-% \hfill \hfill $\downarrow$~~~}
-% }
-% }
-% \setlength\captionGap{1ex}
-% \def\CaptionJustification{}
-% \let\CaptionFontSize\small
-% \setcounter{abovecaptionskipterm}{10}
-% \def\LRFigurePlacement{center}
-% \setlength\FigureDeadMargin{0em}
+% \WrapperOn
+% \bxfigure[h]{Widget details for the XMC-7936}%
+% {\fbox{\hspace{1in}\rule[-.5ex]{3ex}{3ex} $\rightarrow$%
+% \rule[-.2ex]{2ex}{2ex}\hspace{1in}}\Wrapper{PROPRIETARY}%
+% }
+% \WrapperOff
+% Wrapper text (both default and custom) are given a style defined by
+% |\WrapperTextStyle|. The default style is small, boldface text,
+% |\bf\small|.
%
% \section{Box and List Deferral/Preemption}
%
@@ -664,7 +723,7 @@
%
% The unique utility of the |\nextTable| and |\nextFigure| commands
% is in allowing one to define all the document's figures and tables
-% "up front," at the beginning of the document, perhaps even in a
+% ``up front,'' at the beginning of the document, perhaps even in a
% seperate file that is |\input| into the document. Then, when a table
% or figure is referred to in the text, all that need be included in
% the main document is an occurance of |\nextTable| or |\nextFigure|.
@@ -705,17 +764,19 @@
% |TableIndex, FigureIndex, TableClearedIndex,|\\
% |FigureClearedIndex, promptTablesFlag, promptFiguresFlag|\\
% \underline{Macros:}\\
-% |\StoreTable{|\iq caption\uq|}{|\iq boxed object\uq|}|\\
-% |\StoreFigure{|\iq caption\uq|}{|\iq boxed object\uq|}|\\
+% |\StoreTable{|\iq caption\uq|}{|\iq boxed object\uq
+% |}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
+% |\StoreFigure{|\iq caption\uq|}{|\iq boxed object\uq
+% |}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
% |\SaveCBox{|\iq new cmd\uq|}{|\iq boxed object\uq|}|\\
% |\ReciteTable[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq
-% |}{|\iq wdth\uq|}|\\
+% |}{|\iq wdth\uq|}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
% |\ReciteFigure[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq
-% |}{|\iq wdth\uq|}|\\
+% |}{|\iq wdth\uq|}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
% |\theClearedTable[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq
-% |}{|\iq wdth\uq|}|\\
+% |}{|\iq wdth\uq|}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
% |\theClearedFigure[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq
-% |}{|\iq wdth\uq|}|\\
+% |}{|\iq wdth\uq|}{|\iq wrapper\uq|}{|\iq wrapper status\uq|}|\\
% \end{verse}
%
% \DescribeMacro{TableIndex}
@@ -746,11 +807,12 @@
% \DescribeMacro{\StoreTable}
% \DescribeMacro{\StoreFigure}
% The macros |\StoreTable| and |\StoreFigure| use the same form of
-% caption and data arguments as |\bxtable| and |\bxfigure|. In fact, the
+% caption and data arguments as |\bxtable| and |\bxfigure|, with two
+% additional wrapper variables added. In fact, the
% |\bx...| commands call upon the |\Store...| macros. The difference
% is that the |\StoreTable| and |\StoreFigure| macros will save the
% boxed object without printing it, regardless of whether a |\hold...|
-% command has been issued. The saved information will consist of three
+% command has been issued. The saved information will consist of five
% pointers necessary to recreate the table or figure. These pointers
% will be named according to \textsf{boxhandler}'s internal naming
% convention.
@@ -759,20 +821,26 @@
% used by \boxhandler to store the variables for figures and tables.
% The saved information resulting from a |\StoreTable| or |\StoreFigure|
% command will consist of a pointer to a saved box, a pointer to the
-% caption text, and a pointer to the calculated width of the caption box
+% caption text, a pointer to the calculated width of the caption box
% (based on the state of the \boxhandler parameters at the time of the
-% function call).
+% function call), and pointers to the wrapper and a flag indicating
+% whether wrappers are active for this figure or table.
%
% The counters |TableIndex| and |FigureIndex| are used to create a unique
% part of these pointer names, in the form of |\roman{|\iq
% indexname\uq|}|. Saved box pointers have the prefix |tbl-| or |fig-|,
% saved caption pointers have the prefix |tblcap-| or |figcap-| and
% caption-width pointers have the prefix |tblcapwdth-| and |figcapwdth-|.
+% The wrapper pointer has the prefix |tblwrap-| and the pointer to flag
+% indicating the status of wrapper activity is |tblwrapstatus-|.
% Thus, for example, the fourth invocation of |\bxtable| or |\StoreTable|
% will create an sbox named |\tbliv| that is used to store the boxed
% (e.g., tabular) data, a pointer |\tblcapiv| that is used to store the
-% caption text, and a length pointer |\tblcapwdthiv| that stores the
-% value of the calculated caption width. When avoiding creative
+% caption text, a length pointer |\tblcapwdthiv| that stores the
+% value of the calculated caption width, a wrapper pointer |\tblwrapiv|,
+% which stores the wrapper, and a pointer |\tblwrapstatusiv|, which
+% stores a `T' or `F' to indicate whether wrappers are currently active
+% or not. When avoiding creative
% programming, the pointer index (e.g., `iv' in this example) will
% correspond to the actual Table or Figure number (i.e., `4') appearing
% in the caption ID label. However, it is wise to remember,
@@ -853,7 +921,7 @@
%| |\\
%|\newcommand\theClearedTable[4][h]{|\\
%| \vspace*{\fill}|\\
-%| \ReciteTable[#1]{#2}{#3}{#4}|\\
+%| \ReciteTable[#1]{#2}{#3}{#4}{#5}{#6}|\\
%| \vspace*{\fill}|\\
%| \clearpage|\\
%|}|\\
@@ -871,9 +939,9 @@
%| \addtocounter{toggle}{1}|\\
%| \ifnum \arabic{toggle} = 2 \setcounter{toggle}{0} \fi|\\
%| \ifnum \arabic{toggle} = 1|\\
-%| \ReciteTable[t]{#2}{#3}{#4}|\\
+%| \ReciteTable[t]{#2}{#3}{#4}{#5}{#6}|\\
%| \else|\\
-%| \ReciteTable[b]{#2}{#3}{#4}|\\
+%| \ReciteTable[b]{#2}{#3}{#4}{#5}{#6}|\\
%| \clearpage|\\
%| \fi|\\
%|}|
@@ -925,7 +993,8 @@
%%|\newsavebox{\mybox} |\\
%%|\SaveCBox{\mybox}{\framebox(200,100){Ack!}} |\\
%%| |\\
-%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii} |\\
+%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii}% |\\
+%%| {\figwrapii}{\figwrapstatusii} |\\
%%
% \vspace{-1em}
% \section {Vestigials}
@@ -985,6 +1054,7 @@
%% Right brace \} Tilde \~}
% \StopEventually{}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \clearpage
% \vspace{-0.8em}
% \begin{macro}{boxhandler.sty}
% \section{Code Listing}
@@ -998,9 +1068,10 @@
% \end{macro}
%
% \begin{macro}{pbox}
-% This package makes use of the \textsf{pbox} style package to aid
-% in the boxing of captions.
+% This package makes use of the \textsf{ifthen} and \textsf{pbox} style
+% packages to aid in the boxing of captions.
% \begin{macrocode}
+\RequirePackage{ifthen}
\usepackage{pbox}
% \end{macrocode}
% \end{macro}
@@ -1174,6 +1245,7 @@
%% WITHIN-CAPTION JUSTIFICATION CAN BE SET
%% OPTIONS: {}, {\raggedleft}, {\raggedright}, or {\centering}
\def\CaptionJustification{} % <---DEFAULT IS FULL JUSTIFICATION
+
% \end{macrocode}
% \end{macro}
%
@@ -1233,6 +1305,50 @@
% \end{macro}
% \end{macro}
% \end{macro}
+% \begin{macro}{\WrapperOn}
+% \begin{macro}{\WrapperOff}
+% \begin{macro}{\Wrapper}
+% \begin{macro}{\WrapperTextStyle}
+% Wrappers are identifying text (or icons) that bound figures and
+% tables in the
+% upper-left and lower-right corners. Initially disabled, |\WrapperOn|
+% turns wrappers on. The optional argument of |\WrapperOn|, which
+% should be used on the first invocation, specifies the default wrapper.
+% Wrappers can be turned off with |\WrapperOff|.
+% The default wrapper can be changed with a subsequent invocation
+% to |\WrapperOn|.
+%
+% However, the wrapper for any given figure
+% or table may be individually specified (without changing the default
+% wrapper) by way of the
+% argument to |\Wrapper|. Both the default wrapper as well as one
+% passed as an argument to |\Wrapper| are presented with the style
+% given in |\WrapperTextStyle|, which defaults to small, bold font,
+% |\bf\small|. The command |\Wrapper|, if used, should be placed within
+% the second mandatory argument of |\bxtable| and |\bxfigure|, if a
+% wrapper other than the default is desired.
+% \begin{macrocode}
+%% FIGURE & TABLE WRAPPER INITIALIZATIONS
+\def\wrapper{F}
+\def\WrapperTextStyle{\bf\small}
+\def\WrapperTextDefault{DEFAULT WRAPPER}
+\global\def\WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}
+\newcommand\WrapperOn[1][]{%
+ \def\wrapper{T}%
+ \ifthenelse{\equal{#1}{}}%
+ {}{\def\WrapperTextDefault{\noexpand#1}}%
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
+}
+\newcommand\WrapperOff{\def\wrapper{F}}
+\newcommand\Wrapper[1]{\global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\noexpand#1}}
+
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
%
% \begin{macro}{\bxtable}
% The routine |\bxtable| will store the specified table. If
@@ -1243,16 +1359,20 @@
% in the pointer |\tblcapvii|, and the calculated caption width would be
% stored in the pointer |\tblcapwdthvii|.
% \begin{macrocode}
-\newcommand\bxtable[3][t]{
- \StoreTable[#1]{#2}{#3}
- \ifnum \arabic{promptTablesFlag} = 1
- \addtocounter{TableClearedIndex}{1}
- \def\TableBoxLabel{tbl\roman{TableIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}
- \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
+\newcommand\bxtable[3][t]{%
+ \StoreTable[#1]{#2}{#3}{\WrapperText}{\wrapper}%
+ \ifnum\arabic{promptTablesFlag}=1%
+ \addtocounter{TableClearedIndex}{1}%
+ \def\TableBoxLabel{tbl\roman{TableIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableIndex}}%
+ \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
\fi
}
@@ -1267,17 +1387,24 @@
% and the calculated caption width. Note that the optional first
% argument, \textit{loc}, is a dummy argument that is not used here.
% \begin{macrocode}
-\newcommand\StoreTable[3][]{
- \addtocounter{TableIndex}{1}
- \setlength\DeadMargin\TableDeadMargin
- \def\TableBoxLabel{tbl\roman{TableIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}
- \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3}
- \expandafter\def\csname\TableCaptionLabel\endcsname{#2}
- \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname
- \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname
- \CaptionBoxWidth
+\newcommand\StoreTable[5][]{%
+ \addtocounter{TableIndex}{1}%
+ \setlength\DeadMargin\TableDeadMargin%
+ \def\TableBoxLabel{tbl\roman{TableIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableIndex}}%
+ \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3}%
+ \expandafter\def\csname\TableCaptionLabel\endcsname{#2}%
+ \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname%
+ \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname%
+ \CaptionBoxWidth%
+ \expandafter\edef\csname\TableWrapper\endcsname{#4}%
+ \expandafter\edef\csname\WrapperStatus\endcsname{#5}%
+%% After storing table, reset wrapper to default value
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
}
% \end{macrocode}
@@ -1297,27 +1424,37 @@
% restored, the table placement environment is concluded and the table
% itself is ended.
% \begin{macrocode}
-\newcommand\ReciteTable[4][h]{
- \begin{table}[#1]
- \begin{\LRTablePlacement}
- \let\@makecaption \new@makecaption
- \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}
- \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}
- \set@DataBoxWidth{#3}
- \setlength\CaptionBoxWidth{#4}
- \set@BoxOffsets
+\newcommand\ReciteTable[6][h]{%
+ \begin{table}[#1]%
+ \begin{\LRTablePlacement}%
+ \let\@makecaption\new@makecaption%
+ \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}%
+ \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}%
+ \set@DataBoxWidth{#3}%
+ \setlength\CaptionBoxWidth{#4}%
+ \set@BoxOffsets%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}%
+ \makebox[\@DataBoxWidth][l]{#5}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \fi
\rule{\@CaptionBoxOffset}{0em}%
- \parbox{\CaptionBoxWidth}{\caption {#2}}%
+ \parbox{\CaptionBoxWidth}{\caption{#2}}%
\rule{\@CaptionBoxOffset}{0em}%
- \par
- \rule{\@DataBoxOffset}{0in}%
- \usebox{#3}
+ \par%
\rule{\@DataBoxOffset}{0in}%
- \let\@makecaption \old@makecaption
- \setlength\abovecaptionskip \oldabovecaptionskip
- \setlength\belowcaptionskip \oldbelowcaptionskip
- \end{\LRTablePlacement}
- \end{table}
+ \usebox{#3}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \makebox[\@DataBoxWidth][r]{#5}%
+ \rule{\@DataBoxOffset}{0in}%
+ \fi
+ \let\@makecaption\old@makecaption%
+ \setlength\abovecaptionskip \oldabovecaptionskip%
+ \setlength\belowcaptionskip \oldbelowcaptionskip%
+ \end{\LRTablePlacement}%
+ \end{table}%
}
% \end{macrocode}
@@ -1331,18 +1468,22 @@
% standard \LaTeX{} logic. If there are no uncleared tables left to
% format, then the command has no effect.
% \begin{macrocode}
-\newcommand\nextTable[1][h]{
- \ifnum \arabic{TableClearedIndex} < \arabic{TableIndex}{
- \addtocounter{TableClearedIndex}{1}
+\newcommand\nextTable[1][h]{%
+ \ifnum\arabic{TableClearedIndex}<\arabic{TableIndex}{%
+ \addtocounter{TableClearedIndex}{1}%
%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc.
%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc.
%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc.
- \def\TableBoxLabel{tbl\roman{TableClearedIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}
- \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
+ \def\TableBoxLabel{tbl\roman{TableClearedIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableClearedIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableClearedIndex}}%
+ \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
}\fi
}
@@ -1360,23 +1501,27 @@
% |\theClearedTable| which defines the format for clearing and actually
% calls for the table to be recited.
% \begin{macrocode}
-\newcommand\clearTables{
- \clearpage
- \clearlistoftables
- \clearpage
+\newcommand\clearTables{%
+ \clearpage%
+ \clearlistoftables%
+ \clearpage%
%%DO UNTIL ALL HELD TABLES ARE CLEARED
- \whiledo{\arabic{TableClearedIndex} < \arabic{TableIndex}}{
- \addtocounter{TableClearedIndex}{1}
+ \whiledo{\arabic{TableClearedIndex}<\arabic{TableIndex}}{%
+ \addtocounter{TableClearedIndex}{1}%
%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc.
%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc.
%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc.
- \def\TableBoxLabel{tbl\roman{TableClearedIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}
- \theClearedTable{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
- }
+ \def\TableBoxLabel{tbl\roman{TableClearedIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableClearedIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableClearedIndex}}%
+ \theClearedTable{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
+ }%
}
% \end{macrocode}
@@ -1388,12 +1533,12 @@
% different clearing format is desired.
% \begin{macrocode}
%% \theClearedTable CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT IS DESIRED
-\newcommand\theClearedTable[4][h]{
+\newcommand\theClearedTable[6][h]{%
%% CLEAR THIS TABLE ON A PAGE BY ITSELF, CENTERED VERTICALLY
- \vspace*{\fill}
- \ReciteTable[#1]{#2}{#3}{#4}
- \vspace*{\fill}
- \clearpage
+ \vspace*{\fill}%
+ \ReciteTable[#1]{#2}{#3}{#4}{#5}{#6}%
+ \vspace*{\fill}%
+ \clearpage%
}
% \end{macrocode}
@@ -1404,16 +1549,20 @@
% pointers which save the figure use a |\fig-| prefix, instead of a
% |\tbl-| prefix.
% \begin{macrocode}
-\newcommand\bxfigure[3][t]{
- \StoreFigure[#1]{#2}{#3}
- \ifnum \arabic{promptFiguresFlag} = 1
- \addtocounter{FigureClearedIndex}{1}
- \def\FigureBoxLabel{fig\roman{FigureIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}
- \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
+\newcommand\bxfigure[3][t]{%
+ \StoreFigure[#1]{#2}{#3}{\WrapperText}{\wrapper}%
+ \ifnum\arabic{promptFiguresFlag}=1%
+ \addtocounter{FigureClearedIndex}{1}%
+ \def\FigureBoxLabel{fig\roman{FigureIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureIndex}}%
+ \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
\fi
}
@@ -1423,17 +1572,24 @@
% \begin{macro}{\StoreFigure}
% This routine is analogous to |\StoreTable| in every way.
% \begin{macrocode}
-\newcommand\StoreFigure[3][]{
- \addtocounter{FigureIndex}{1}
- \setlength\DeadMargin\FigureDeadMargin
- \def\FigureBoxLabel{fig\roman{FigureIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}
- \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3}
- \expandafter\def\csname\FigureCaptionLabel\endcsname{#2}
- \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname
- \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname
- \CaptionBoxWidth
+\newcommand\StoreFigure[5][]{%
+ \addtocounter{FigureIndex}{1}%
+ \setlength\DeadMargin\FigureDeadMargin%
+ \def\FigureBoxLabel{fig\roman{FigureIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureIndex}}%
+ \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3}%
+ \expandafter\def\csname\FigureCaptionLabel\endcsname{#2}%
+ \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname%
+ \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname%
+ \CaptionBoxWidth%
+ \expandafter\edef\csname\FigureWrapper\endcsname{#4}%
+ \expandafter\edef\csname\WrapperStatus\endcsname{#5}%
+%% After storing figure, reset wrapper to default value
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
}
% \end{macrocode}
@@ -1444,27 +1600,37 @@
% In the case of |\ReciteFigure|, the figure-data box is output
% \textbf{before} the caption, not after.
% \begin{macrocode}
-\newcommand\ReciteFigure[4][h]{
- \begin{figure}[#1]
- \begin{\LRFigurePlacement}
- \let\@makecaption \new@makecaption
- \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}
- \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}
- \set@DataBoxWidth{#3}
- \setlength\CaptionBoxWidth{#4}
- \set@BoxOffsets
+\newcommand\ReciteFigure[6][h]{%
+ \begin{figure}[#1]%
+ \begin{\LRFigurePlacement}%
+ \let\@makecaption\new@makecaption%
+ \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}%
+ \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}%
+ \set@DataBoxWidth{#3}%
+ \setlength\CaptionBoxWidth{#4}%
+ \set@BoxOffsets%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}%
+ \makebox[\@DataBoxWidth][l]{#5}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \fi
\rule{\@DataBoxOffset}{0in}%
\usebox{#3}%
\rule{\@DataBoxOffset}{0in}%
- \par
+ \par%
\rule{\@CaptionBoxOffset}{0em}%
- \parbox{\CaptionBoxWidth}{\caption {#2}}%
+ \parbox{\CaptionBoxWidth}{\caption{#2}}%
\rule{\@CaptionBoxOffset}{0em}%
- \let\@makecaption \old@makecaption
- \setlength\abovecaptionskip \oldabovecaptionskip
- \setlength\belowcaptionskip \oldbelowcaptionskip
- \end{\LRFigurePlacement}
- \end{figure}
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \makebox[\@DataBoxWidth][r]{#5}%
+ \rule{\@DataBoxOffset}{0in}%
+ \fi
+ \let\@makecaption\old@makecaption%
+ \setlength\abovecaptionskip\oldabovecaptionskip%
+ \setlength\belowcaptionskip\oldbelowcaptionskip%
+ \end{\LRFigurePlacement}%
+ \end{figure}%
}
% \end{macrocode}
@@ -1473,18 +1639,22 @@
% \begin{macro}{\nextFigure}
% This routine is analogous to |\nextTable| in every way.
% \begin{macrocode}
-\newcommand\nextFigure[1][h]{
- \ifnum \arabic{FigureClearedIndex} < \arabic{FigureIndex}{
- \addtocounter{FigureClearedIndex}{1}
+\newcommand\nextFigure[1][h]{%
+ \ifnum\arabic{FigureClearedIndex}<\arabic{FigureIndex}{%
+ \addtocounter{FigureClearedIndex}{1}%
%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc.
%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc.
%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc.
- \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}
- \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
+ \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureClearedIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureClearedIndex}}%
+ \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
}\fi
}
@@ -1493,23 +1663,27 @@
% \begin{macro}{\clearFigures}
% This routine is analogous to |\clearTables| in every way.
% \begin{macrocode}
-\newcommand\clearFigures{
- \clearpage
- \clearlistoffigures
- \clearpage
+\newcommand\clearFigures{%
+ \clearpage%
+ \clearlistoffigures%
+ \clearpage%
%%DO UNTIL ALL HELD FIGURES ARE CLEARED
- \whiledo{\arabic{FigureClearedIndex} < \arabic{FigureIndex}}{
- \addtocounter{FigureClearedIndex}{1}
-%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc.
+ \whiledo{\arabic{FigureClearedIndex}<\arabic{FigureIndex}}{%
+ \addtocounter{FigureClearedIndex}{1}%
+%% \FigureBoxLabel : figi, figii, figiii, figiv, etc.
%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc.
%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc.
- \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}
- \theClearedFigure{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
- }
+ \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureClearedIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureClearedIndex}}%
+ \theClearedFigure{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
+ }%
}
% \end{macrocode}
@@ -1520,12 +1694,12 @@
% figure per page, vertically centered.
% \begin{macrocode}
%% \theClearedFigure CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT DESIRED
-\newcommand\theClearedFigure[4][h]{
+\newcommand\theClearedFigure[6][h]{%
%% CLEAR THIS FIGURE ON A PAGE BY ITSELF, CENTERED VERTICALLY
- \vspace*{\fill}
- \ReciteFigure[#1]{#2}{#3}{#4}
- \vspace*{\fill}
- \clearpage
+ \vspace*{\fill}%
+ \ReciteFigure[#1]{#2}{#3}{#4}{#5}{#6}%
+ \vspace*{\fill}%
+ \clearpage%
}
% \end{macrocode}
@@ -1538,10 +1712,10 @@
% up, so as to remain greater than or equal the minimum allowed caption
% width.
% \begin{macrocode}
-\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{
- \setlength\@minCaptionBoxWidth{#1}
- \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth
- \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth
+\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{%
+ \setlength\@minCaptionBoxWidth{#1}%
+ \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth%
+ \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth%
\fi
}
\relaxCaptionWidth% SET INITIAL \@minCaptionBoxWidth TO DEFAULT VALUE
@@ -1556,10 +1730,10 @@
% be reduced, so as to remain less than or equal the maximum allowed
% caption width.
% \begin{macrocode}
-\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{
- \setlength\@maxCaptionBoxWidth{#1}
- \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth
- \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth
+\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{%
+ \setlength\@maxCaptionBoxWidth{#1}%
+ \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth%
+ \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth%
\fi
}
\limitCaptionWidth% SET INITIAL \@maxCaptionBoxWidth TO DEFAULT VALUE
@@ -1572,17 +1746,17 @@
% Only twist: if only one argument given, both min- and max-caption
% widths set to that value.
% \begin{macrocode}
-\newcommand\constrainCaptionWidth[2][-1in]{
- \ifdim #1 < 0in
- \setlength\@minCaptionBoxWidth{#2}
- \setlength\@maxCaptionBoxWidth{#2}
+\newcommand\constrainCaptionWidth[2][-1in]{%
+ \ifdim #1 < 0in%
+ \setlength\@minCaptionBoxWidth{#2}%
+ \setlength\@maxCaptionBoxWidth{#2}%
\else
- \ifdim #1 < #2
- \setlength\@minCaptionBoxWidth{#1}
- \setlength\@maxCaptionBoxWidth{#2}
+ \ifdim #1 < #2%
+ \setlength\@minCaptionBoxWidth{#1}%
+ \setlength\@maxCaptionBoxWidth{#2}%
\else
- \setlength\@minCaptionBoxWidth{#2}
- \setlength\@maxCaptionBoxWidth{#1}
+ \setlength\@minCaptionBoxWidth{#2}%
+ \setlength\@maxCaptionBoxWidth{#1}%
\fi
\fi
}
@@ -1594,10 +1768,10 @@
% Low-level routine to save box data in an |sbox|. Also, calculates data
% box width and associated caption box width.
% \begin{macrocode}
-\newcommand\SaveCBox[2]{
- \newsavebox{#1}
- \sbox{#1}{#2}
- \set@BoxWidths{#1}
+\newcommand\SaveCBox[2]{%
+ \newsavebox{#1}%
+ \sbox{#1}{#2}%
+ \set@BoxWidths{#1}%
}
% \end{macrocode}
@@ -1607,9 +1781,9 @@
% Call successive routines to define |\@DataBoxWidth| and
% |\CaptionBoxWidth|.
% \begin{macrocode}
-\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin)
- \set@DataBoxWidth{#1}
- \set@CaptionBoxWidth
+\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin)%
+ \set@DataBoxWidth{#1}%
+ \set@CaptionBoxWidth%
}
% \end{macrocode}
@@ -1618,8 +1792,8 @@
% \begin{macro}{\set@DataBoxWidth}
% Calculate and set data-box width.
% \begin{macrocode}
-\newcommand\set@DataBoxWidth[1]{
- \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}}
+\newcommand\set@DataBoxWidth[1]{%
+ \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}}%
}
% \end{macrocode}
@@ -1629,14 +1803,14 @@
% Calculate and set caption-box width, subject to constraints of dead
% margin as well as caption-box min/max allowable widths.
% \begin{macrocode}
-\newcommand\set@CaptionBoxWidth{
- \setlength\CaptionBoxWidth\@DataBoxWidth
- \addtolength{\CaptionBoxWidth}{-2\DeadMargin}
- \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth
- \setlength\CaptionBoxWidth\@minCaptionBoxWidth
+\newcommand\set@CaptionBoxWidth{%
+ \setlength\CaptionBoxWidth\@DataBoxWidth%
+ \addtolength{\CaptionBoxWidth}{-2\DeadMargin}%
+ \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth%
+ \setlength\CaptionBoxWidth\@minCaptionBoxWidth%
\fi
- \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth
- \setlength\CaptionBoxWidth\@maxCaptionBoxWidth
+ \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth%
+ \setlength\CaptionBoxWidth\@maxCaptionBoxWidth%
\fi
}
@@ -1649,15 +1823,15 @@
% box with respect to the associated caption box. Use it to set
% |\@DataBoxOffset| and |\@CaptionBoxOffset|.
% \begin{macrocode}
-\newcommand\set@BoxOffsets{
- \setlength\@DataBoxSurplus{\@DataBoxWidth}
- \addtolength\@DataBoxSurplus{-\CaptionBoxWidth}
- \ifdim \@DataBoxSurplus > 0in
- \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus}
- \setlength\@DataBoxOffset{0in}
+\newcommand\set@BoxOffsets{%
+ \setlength\@DataBoxSurplus{\@DataBoxWidth}%
+ \addtolength\@DataBoxSurplus{-\CaptionBoxWidth}%
+ \ifdim \@DataBoxSurplus > 0in%
+ \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus}%
+ \setlength\@DataBoxOffset{0in}%
\else
- \setlength\@CaptionBoxOffset{0in}
- \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus}
+ \setlength\@CaptionBoxOffset{0in}%
+ \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus}%
\fi
}
@@ -1669,12 +1843,12 @@
% Define the code for placing offset- and nooffset-captions in the
% caption box.
% \begin{macrocode}
-\long\def\offset@caption#1#2{
- \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}}
- \addtolength\@captionIDwidth\captionGap
- \setlength\@captionWidth\CaptionBoxWidth
- \addtolength\@captionWidth{-\@captionIDwidth}
- \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth}
+\long\def\offset@caption#1#2{%
+ \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}}%
+ \addtolength\@captionIDwidth\captionGap%
+ \setlength\@captionWidth\CaptionBoxWidth%
+ \addtolength\@captionWidth{-\@captionIDwidth}%
+ \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth}%
{\CaptionJustification\CaptionFontSize{#2.}}%
}
@@ -1693,15 +1867,15 @@
% captions in the caption box.
% \begin{macrocode}
\long\def\shortleft@caption#1#2{%
- \raggedright \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \raggedright\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
\long\def\shortcenter@caption#1#2{%
- \centering \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \centering\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
\long\def\shortright@caption#1#2{%
- \raggedleft \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \raggedleft\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
% \end{macrocode}
@@ -1715,14 +1889,14 @@
% long- and short-caption definitions, that can be changed on the fly.
% \begin{macrocode}
\long\def\new@makecaption#1#2{%
- \vskip\abovecaptionskip
+ \vskip\abovecaptionskip%
\sbox\@tempboxa{\CaptionFontSize #1.\rule{\captionGap}{0in}#2.}%
- \ifdim \wd\@tempboxa >\hsize
- \long@caption{#1}{#2}
+ \ifdim \wd\@tempboxa >\hsize%
+ \long@caption{#1}{#2}%
\else
- \short@caption{#1}{#2}
+ \short@caption{#1}{#2}%
\fi
- \vskip\belowcaptionskip
+ \vskip\belowcaptionskip%
}
% \end{macrocode}
@@ -1735,12 +1909,12 @@
% redefine the captions styles for long and short captions,
% respectively.
% \begin{macrocode}
-\newcommand\captionStyle[2]{
- \if o#1 \let\long@caption \offset@caption \fi
- \if n#1 \let\long@caption \nooffset@caption \fi
- \if l#2 \let\short@caption \shortleft@caption \fi
- \if c#2 \let\short@caption \shortcenter@caption \fi
- \if r#2 \let\short@caption \shortright@caption \fi
+\newcommand\captionStyle[2]{%
+ \if o#1\let\long@caption\offset@caption\fi
+ \if n#1\let\long@caption\nooffset@caption\fi
+ \if l#2\let\short@caption\shortleft@caption\fi
+ \if c#2\let\short@caption\shortcenter@caption\fi
+ \if r#2\let\short@caption\shortright@caption\fi
}
% \end{macrocode}
@@ -1761,8 +1935,8 @@
% Kills subsequent calls for the Table of Contents by renewing the
% command as null.
% \begin{macrocode}
-\newcommand\killtableofcontents{
- \renewcommand\tableofcontents{}
+\newcommand\killtableofcontents{%
+ \renewcommand\tableofcontents{}%
}
% \end{macrocode}
@@ -1789,9 +1963,9 @@
% Kills subsequent calls for List of Figures by renewing the command (and
% redefining the saved command) as null.
% \begin{macrocode}
-\newcommand\killlistoffigures{
- \def\oldlistoffigures {}
- \renewcommand\listoffigures{}
+\newcommand\killlistoffigures{%
+ \def\oldlistoffigures {}%
+ \renewcommand\listoffigures{}%
}
% \end{macrocode}
@@ -1801,8 +1975,8 @@
% To put the \textit{lof} ``on hold,'' we merely redefine
% |\listoffigures| to increment the |lofInvocations| counter.
% \begin{macrocode}
-\newcommand\holdlistoffigures{
- \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}}
+\newcommand\holdlistoffigures{%
+ \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}}%
}
% \end{macrocode}
@@ -1814,11 +1988,11 @@
% does this by incrementing |lofPrints| until it reaches a value of
% |lofInvocations|.
% \begin{macrocode}
-\newcommand\clearlistoffigures{
- \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{
- \addtocounter{lofPrints}{1}
- \oldlistoffigures
- }
+\newcommand\clearlistoffigures{%
+ \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{%
+ \addtocounter{lofPrints}{1}%
+ \oldlistoffigures%
+ }%
}
% \end{macrocode}
@@ -1838,20 +2012,20 @@
\newcounter{lotPrints} \setcounter{lotPrints}{0}
\let\oldlistoftables\listoftables
-\newcommand\killlistoftables{
- \def\oldlistoftables {}
- \renewcommand\listoftables{}
+\newcommand\killlistoftables{%
+ \def\oldlistoftables {}%
+ \renewcommand\listoftables{}%
}
-\newcommand\holdlistoftables{
- \renewcommand\listoftables{\addtocounter{lotInvocations}{1}}
+\newcommand\holdlistoftables{%
+ \renewcommand\listoftables{\addtocounter{lotInvocations}{1}}%
}
-\newcommand\clearlistoftables{
- \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{
- \addtocounter{lotPrints}{1}
- \oldlistoftables
- }
+\newcommand\clearlistoftables{%
+ \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{%
+ \addtocounter{lotPrints}{1}%
+ \oldlistoftables%
+ }%
}
% \end{macrocode}
diff --git a/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty b/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty
index 083fd3b311e..00c1e2cd3ac 100644
--- a/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty
+++ b/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty
@@ -30,8 +30,9 @@
%% arlcaptions.sty.
%%
\ProvidesPackage{boxhandler}
-[2006/07/29 v1.10
- Flexible Captioning Styles and Deferred Box/List Printing]
+[2008/08/16 v1.21
+ Tools for Optimizing Captions, Presentation, and
+ Placement of Tables and Figures]
\NeedsTeXFormat{LaTeX2e}
%% Examples of a number of calls provided in this style are given below,
%% in no particular order:
@@ -75,7 +76,8 @@
%%|\newsavebox{\mybox} |\\
%%|\SaveCBox{\mybox}{\framebox(200,100){Ack!}} |\\
%%| |\\
-%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii} |\\
+%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii}% |\\
+%%| {\figwrapii}{\figwrapstatusii} |\\
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -93,6 +95,7 @@
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\RequirePackage{ifthen}
\usepackage{pbox}
\newcounter{TableIndex} \setcounter{TableIndex}{0}
\newcounter{FigureIndex} \setcounter{FigureIndex}{0}
@@ -142,6 +145,7 @@
%% WITHIN-CAPTION JUSTIFICATION CAN BE SET
%% OPTIONS: {}, {\raggedleft}, {\raggedright}, or {\centering}
\def\CaptionJustification{} % <---DEFAULT IS FULL JUSTIFICATION
+
%% WORKING VARIABLES
\newlength\DeadMargin
\newlength\@DataBoxWidth
@@ -152,265 +156,339 @@
\newlength\@captionWidth
\newlength\@DataBoxSurplus
-\newcommand\bxtable[3][t]{
- \StoreTable[#1]{#2}{#3}
- \ifnum \arabic{promptTablesFlag} = 1
- \addtocounter{TableClearedIndex}{1}
- \def\TableBoxLabel{tbl\roman{TableIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}
- \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
+%% FIGURE & TABLE WRAPPER INITIALIZATIONS
+\def\wrapper{F}
+\def\WrapperTextStyle{\bf\small}
+\def\WrapperTextDefault{DEFAULT WRAPPER}
+\global\def\WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}
+\newcommand\WrapperOn[1][]{%
+ \def\wrapper{T}%
+ \ifthenelse{\equal{#1}{}}%
+ {}{\def\WrapperTextDefault{\noexpand#1}}%
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
+}
+\newcommand\WrapperOff{\def\wrapper{F}}
+\newcommand\Wrapper[1]{\global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\noexpand#1}}
+
+\newcommand\bxtable[3][t]{%
+ \StoreTable[#1]{#2}{#3}{\WrapperText}{\wrapper}%
+ \ifnum\arabic{promptTablesFlag}=1%
+ \addtocounter{TableClearedIndex}{1}%
+ \def\TableBoxLabel{tbl\roman{TableIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableIndex}}%
+ \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
\fi
}
-\newcommand\StoreTable[3][]{
- \addtocounter{TableIndex}{1}
- \setlength\DeadMargin\TableDeadMargin
- \def\TableBoxLabel{tbl\roman{TableIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}
- \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3}
- \expandafter\def\csname\TableCaptionLabel\endcsname{#2}
- \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname
- \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname
- \CaptionBoxWidth
-}
-
-\newcommand\ReciteTable[4][h]{
- \begin{table}[#1]
- \begin{\LRTablePlacement}
- \let\@makecaption \new@makecaption
- \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}
- \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}
- \set@DataBoxWidth{#3}
- \setlength\CaptionBoxWidth{#4}
- \set@BoxOffsets
+\newcommand\StoreTable[5][]{%
+ \addtocounter{TableIndex}{1}%
+ \setlength\DeadMargin\TableDeadMargin%
+ \def\TableBoxLabel{tbl\roman{TableIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableIndex}}%
+ \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3}%
+ \expandafter\def\csname\TableCaptionLabel\endcsname{#2}%
+ \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname%
+ \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname%
+ \CaptionBoxWidth%
+ \expandafter\edef\csname\TableWrapper\endcsname{#4}%
+ \expandafter\edef\csname\WrapperStatus\endcsname{#5}%
+%% After storing table, reset wrapper to default value
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
+}
+
+\newcommand\ReciteTable[6][h]{%
+ \begin{table}[#1]%
+ \begin{\LRTablePlacement}%
+ \let\@makecaption\new@makecaption%
+ \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}%
+ \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}%
+ \set@DataBoxWidth{#3}%
+ \setlength\CaptionBoxWidth{#4}%
+ \set@BoxOffsets%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}%
+ \makebox[\@DataBoxWidth][l]{#5}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \fi
\rule{\@CaptionBoxOffset}{0em}%
- \parbox{\CaptionBoxWidth}{\caption {#2}}%
+ \parbox{\CaptionBoxWidth}{\caption{#2}}%
\rule{\@CaptionBoxOffset}{0em}%
- \par
+ \par%
\rule{\@DataBoxOffset}{0in}%
- \usebox{#3}
+ \usebox{#3}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \makebox[\@DataBoxWidth][r]{#5}%
\rule{\@DataBoxOffset}{0in}%
- \let\@makecaption \old@makecaption
- \setlength\abovecaptionskip \oldabovecaptionskip
- \setlength\belowcaptionskip \oldbelowcaptionskip
- \end{\LRTablePlacement}
- \end{table}
+ \fi
+ \let\@makecaption\old@makecaption%
+ \setlength\abovecaptionskip \oldabovecaptionskip%
+ \setlength\belowcaptionskip \oldbelowcaptionskip%
+ \end{\LRTablePlacement}%
+ \end{table}%
}
-\newcommand\nextTable[1][h]{
- \ifnum \arabic{TableClearedIndex} < \arabic{TableIndex}{
- \addtocounter{TableClearedIndex}{1}
+\newcommand\nextTable[1][h]{%
+ \ifnum\arabic{TableClearedIndex}<\arabic{TableIndex}{%
+ \addtocounter{TableClearedIndex}{1}%
%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc.
%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc.
%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc.
- \def\TableBoxLabel{tbl\roman{TableClearedIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}
- \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
+ \def\TableBoxLabel{tbl\roman{TableClearedIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableClearedIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableClearedIndex}}%
+ \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
}\fi
}
-\newcommand\clearTables{
- \clearpage
- \clearlistoftables
- \clearpage
+\newcommand\clearTables{%
+ \clearpage%
+ \clearlistoftables%
+ \clearpage%
%%DO UNTIL ALL HELD TABLES ARE CLEARED
- \whiledo{\arabic{TableClearedIndex} < \arabic{TableIndex}}{
- \addtocounter{TableClearedIndex}{1}
+ \whiledo{\arabic{TableClearedIndex}<\arabic{TableIndex}}{%
+ \addtocounter{TableClearedIndex}{1}%
%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc.
%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc.
%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc.
- \def\TableBoxLabel{tbl\roman{TableClearedIndex}}
- \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}
- \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}
- \theClearedTable{\csname\TableCaptionLabel\endcsname}
- {\csname\TableBoxLabel\endcsname}
- {\csname\TblCaptionWidthLabel\endcsname}
- }
+ \def\TableBoxLabel{tbl\roman{TableClearedIndex}}%
+ \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}}%
+ \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}}%
+ \def\TableWrapper{tblwrap\roman{TableClearedIndex}}%
+ \def\WrapperStatus{tblwrapstatus\roman{TableClearedIndex}}%
+ \theClearedTable{\csname\TableCaptionLabel\endcsname}%
+ {\csname\TableBoxLabel\endcsname}%
+ {\csname\TblCaptionWidthLabel\endcsname}%
+ {\csname\TableWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
+ }%
}
%% \theClearedTable CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT IS DESIRED
-\newcommand\theClearedTable[4][h]{
+\newcommand\theClearedTable[6][h]{%
%% CLEAR THIS TABLE ON A PAGE BY ITSELF, CENTERED VERTICALLY
- \vspace*{\fill}
- \ReciteTable[#1]{#2}{#3}{#4}
- \vspace*{\fill}
- \clearpage
-}
-
-\newcommand\bxfigure[3][t]{
- \StoreFigure[#1]{#2}{#3}
- \ifnum \arabic{promptFiguresFlag} = 1
- \addtocounter{FigureClearedIndex}{1}
- \def\FigureBoxLabel{fig\roman{FigureIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}
- \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
+ \vspace*{\fill}%
+ \ReciteTable[#1]{#2}{#3}{#4}{#5}{#6}%
+ \vspace*{\fill}%
+ \clearpage%
+}
+
+\newcommand\bxfigure[3][t]{%
+ \StoreFigure[#1]{#2}{#3}{\WrapperText}{\wrapper}%
+ \ifnum\arabic{promptFiguresFlag}=1%
+ \addtocounter{FigureClearedIndex}{1}%
+ \def\FigureBoxLabel{fig\roman{FigureIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureIndex}}%
+ \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
\fi
}
-\newcommand\StoreFigure[3][]{
- \addtocounter{FigureIndex}{1}
- \setlength\DeadMargin\FigureDeadMargin
- \def\FigureBoxLabel{fig\roman{FigureIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}
- \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3}
- \expandafter\def\csname\FigureCaptionLabel\endcsname{#2}
- \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname
- \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname
- \CaptionBoxWidth
-}
-
-\newcommand\ReciteFigure[4][h]{
- \begin{figure}[#1]
- \begin{\LRFigurePlacement}
- \let\@makecaption \new@makecaption
- \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}
- \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}
- \set@DataBoxWidth{#3}
- \setlength\CaptionBoxWidth{#4}
- \set@BoxOffsets
+\newcommand\StoreFigure[5][]{%
+ \addtocounter{FigureIndex}{1}%
+ \setlength\DeadMargin\FigureDeadMargin%
+ \def\FigureBoxLabel{fig\roman{FigureIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureIndex}}%
+ \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3}%
+ \expandafter\def\csname\FigureCaptionLabel\endcsname{#2}%
+ \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname%
+ \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname%
+ \CaptionBoxWidth%
+ \expandafter\edef\csname\FigureWrapper\endcsname{#4}%
+ \expandafter\edef\csname\WrapperStatus\endcsname{#5}%
+%% After storing figure, reset wrapper to default value
+ \global\def%
+ \WrapperText{\noexpand\WrapperTextStyle\WrapperTextDefault}%
+}
+
+\newcommand\ReciteFigure[6][h]{%
+ \begin{figure}[#1]%
+ \begin{\LRFigurePlacement}%
+ \let\@makecaption\new@makecaption%
+ \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@}%
+ \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@}%
+ \set@DataBoxWidth{#3}%
+ \setlength\CaptionBoxWidth{#4}%
+ \set@BoxOffsets%
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}%
+ \makebox[\@DataBoxWidth][l]{#5}%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \fi
\rule{\@DataBoxOffset}{0in}%
\usebox{#3}%
\rule{\@DataBoxOffset}{0in}%
- \par
+ \par%
\rule{\@CaptionBoxOffset}{0em}%
- \parbox{\CaptionBoxWidth}{\caption {#2}}%
+ \parbox{\CaptionBoxWidth}{\caption{#2}}%
\rule{\@CaptionBoxOffset}{0em}%
- \let\@makecaption \old@makecaption
- \setlength\abovecaptionskip \oldabovecaptionskip
- \setlength\belowcaptionskip \oldbelowcaptionskip
- \end{\LRFigurePlacement}
- \end{figure}
-}
-
-\newcommand\nextFigure[1][h]{
- \ifnum \arabic{FigureClearedIndex} < \arabic{FigureIndex}{
- \addtocounter{FigureClearedIndex}{1}
+ \if T#6%
+ \rule{\@DataBoxOffset}{0in}\\%
+ \makebox[\@DataBoxWidth][r]{#5}%
+ \rule{\@DataBoxOffset}{0in}%
+ \fi
+ \let\@makecaption\old@makecaption%
+ \setlength\abovecaptionskip\oldabovecaptionskip%
+ \setlength\belowcaptionskip\oldbelowcaptionskip%
+ \end{\LRFigurePlacement}%
+ \end{figure}%
+}
+
+\newcommand\nextFigure[1][h]{%
+ \ifnum\arabic{FigureClearedIndex}<\arabic{FigureIndex}{%
+ \addtocounter{FigureClearedIndex}{1}%
%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc.
%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc.
%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc.
- \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}
- \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
+ \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureClearedIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureClearedIndex}}%
+ \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
}\fi
}
-\newcommand\clearFigures{
- \clearpage
- \clearlistoffigures
- \clearpage
+\newcommand\clearFigures{%
+ \clearpage%
+ \clearlistoffigures%
+ \clearpage%
%%DO UNTIL ALL HELD FIGURES ARE CLEARED
- \whiledo{\arabic{FigureClearedIndex} < \arabic{FigureIndex}}{
- \addtocounter{FigureClearedIndex}{1}
-%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc.
+ \whiledo{\arabic{FigureClearedIndex}<\arabic{FigureIndex}}{%
+ \addtocounter{FigureClearedIndex}{1}%
+%% \FigureBoxLabel : figi, figii, figiii, figiv, etc.
%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc.
%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc.
- \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}
- \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}
- \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}
- \theClearedFigure{\csname\FigureCaptionLabel\endcsname}
- {\csname\FigureBoxLabel\endcsname}
- {\csname\FigCaptionWidthLabel\endcsname}
- }
+ \def\FigureBoxLabel{fig\roman{FigureClearedIndex}}%
+ \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}}%
+ \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}}%
+ \def\FigureWrapper{figwrap\roman{FigureClearedIndex}}%
+ \def\WrapperStatus{figwrapstatus\roman{FigureClearedIndex}}%
+ \theClearedFigure{\csname\FigureCaptionLabel\endcsname}%
+ {\csname\FigureBoxLabel\endcsname}%
+ {\csname\FigCaptionWidthLabel\endcsname}%
+ {\csname\FigureWrapper\endcsname}%
+ {\csname\WrapperStatus\endcsname}%
+ }%
}
%% \theClearedFigure CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT DESIRED
-\newcommand\theClearedFigure[4][h]{
+\newcommand\theClearedFigure[6][h]{%
%% CLEAR THIS FIGURE ON A PAGE BY ITSELF, CENTERED VERTICALLY
- \vspace*{\fill}
- \ReciteFigure[#1]{#2}{#3}{#4}
- \vspace*{\fill}
- \clearpage
+ \vspace*{\fill}%
+ \ReciteFigure[#1]{#2}{#3}{#4}{#5}{#6}%
+ \vspace*{\fill}%
+ \clearpage%
}
-\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{
- \setlength\@minCaptionBoxWidth{#1}
- \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth
- \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth
+\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{%
+ \setlength\@minCaptionBoxWidth{#1}%
+ \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth%
+ \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth%
\fi
}
\relaxCaptionWidth% SET INITIAL \@minCaptionBoxWidth TO DEFAULT VALUE
-\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{
- \setlength\@maxCaptionBoxWidth{#1}
- \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth
- \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth
+\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{%
+ \setlength\@maxCaptionBoxWidth{#1}%
+ \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth%
+ \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth%
\fi
}
\limitCaptionWidth% SET INITIAL \@maxCaptionBoxWidth TO DEFAULT VALUE
-\newcommand\constrainCaptionWidth[2][-1in]{
- \ifdim #1 < 0in
- \setlength\@minCaptionBoxWidth{#2}
- \setlength\@maxCaptionBoxWidth{#2}
+\newcommand\constrainCaptionWidth[2][-1in]{%
+ \ifdim #1 < 0in%
+ \setlength\@minCaptionBoxWidth{#2}%
+ \setlength\@maxCaptionBoxWidth{#2}%
\else
- \ifdim #1 < #2
- \setlength\@minCaptionBoxWidth{#1}
- \setlength\@maxCaptionBoxWidth{#2}
+ \ifdim #1 < #2%
+ \setlength\@minCaptionBoxWidth{#1}%
+ \setlength\@maxCaptionBoxWidth{#2}%
\else
- \setlength\@minCaptionBoxWidth{#2}
- \setlength\@maxCaptionBoxWidth{#1}
+ \setlength\@minCaptionBoxWidth{#2}%
+ \setlength\@maxCaptionBoxWidth{#1}%
\fi
\fi
}
-\newcommand\SaveCBox[2]{
- \newsavebox{#1}
- \sbox{#1}{#2}
- \set@BoxWidths{#1}
+\newcommand\SaveCBox[2]{%
+ \newsavebox{#1}%
+ \sbox{#1}{#2}%
+ \set@BoxWidths{#1}%
}
-\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin)
- \set@DataBoxWidth{#1}
- \set@CaptionBoxWidth
+\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin)%
+ \set@DataBoxWidth{#1}%
+ \set@CaptionBoxWidth%
}
-\newcommand\set@DataBoxWidth[1]{
- \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}}
+\newcommand\set@DataBoxWidth[1]{%
+ \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}}%
}
-\newcommand\set@CaptionBoxWidth{
- \setlength\CaptionBoxWidth\@DataBoxWidth
- \addtolength{\CaptionBoxWidth}{-2\DeadMargin}
- \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth
- \setlength\CaptionBoxWidth\@minCaptionBoxWidth
+\newcommand\set@CaptionBoxWidth{%
+ \setlength\CaptionBoxWidth\@DataBoxWidth%
+ \addtolength{\CaptionBoxWidth}{-2\DeadMargin}%
+ \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth%
+ \setlength\CaptionBoxWidth\@minCaptionBoxWidth%
\fi
- \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth
- \setlength\CaptionBoxWidth\@maxCaptionBoxWidth
+ \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth%
+ \setlength\CaptionBoxWidth\@maxCaptionBoxWidth%
\fi
}
-\newcommand\set@BoxOffsets{
- \setlength\@DataBoxSurplus{\@DataBoxWidth}
- \addtolength\@DataBoxSurplus{-\CaptionBoxWidth}
- \ifdim \@DataBoxSurplus > 0in
- \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus}
- \setlength\@DataBoxOffset{0in}
+\newcommand\set@BoxOffsets{%
+ \setlength\@DataBoxSurplus{\@DataBoxWidth}%
+ \addtolength\@DataBoxSurplus{-\CaptionBoxWidth}%
+ \ifdim \@DataBoxSurplus > 0in%
+ \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus}%
+ \setlength\@DataBoxOffset{0in}%
\else
- \setlength\@CaptionBoxOffset{0in}
- \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus}
+ \setlength\@CaptionBoxOffset{0in}%
+ \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus}%
\fi
}
-\long\def\offset@caption#1#2{
- \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}}
- \addtolength\@captionIDwidth\captionGap
- \setlength\@captionWidth\CaptionBoxWidth
- \addtolength\@captionWidth{-\@captionIDwidth}
- \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth}
+\long\def\offset@caption#1#2{%
+ \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}}%
+ \addtolength\@captionIDwidth\captionGap%
+ \setlength\@captionWidth\CaptionBoxWidth%
+ \addtolength\@captionWidth{-\@captionIDwidth}%
+ \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth}%
{\CaptionJustification\CaptionFontSize{#2.}}%
}
@@ -419,42 +497,42 @@
}
\long\def\shortleft@caption#1#2{%
- \raggedright \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \raggedright\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
\long\def\shortcenter@caption#1#2{%
- \centering \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \centering\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
\long\def\shortright@caption#1#2{%
- \raggedleft \CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
+ \raggedleft\CaptionFontSize #1.\rule{\captionGap}{0in}#2.%
}
\long\def\new@makecaption#1#2{%
- \vskip\abovecaptionskip
+ \vskip\abovecaptionskip%
\sbox\@tempboxa{\CaptionFontSize #1.\rule{\captionGap}{0in}#2.}%
- \ifdim \wd\@tempboxa >\hsize
- \long@caption{#1}{#2}
+ \ifdim \wd\@tempboxa >\hsize%
+ \long@caption{#1}{#2}%
\else
- \short@caption{#1}{#2}
+ \short@caption{#1}{#2}%
\fi
- \vskip\belowcaptionskip
+ \vskip\belowcaptionskip%
}
-\newcommand\captionStyle[2]{
- \if o#1 \let\long@caption \offset@caption \fi
- \if n#1 \let\long@caption \nooffset@caption \fi
- \if l#2 \let\short@caption \shortleft@caption \fi
- \if c#2 \let\short@caption \shortcenter@caption \fi
- \if r#2 \let\short@caption \shortright@caption \fi
+\newcommand\captionStyle[2]{%
+ \if o#1\let\long@caption\offset@caption\fi
+ \if n#1\let\long@caption\nooffset@caption\fi
+ \if l#2\let\short@caption\shortleft@caption\fi
+ \if c#2\let\short@caption\shortcenter@caption\fi
+ \if r#2\let\short@caption\shortright@caption\fi
}
%% SET DEFAULT CAPTION STYLE: CAPTION ID OFFSET FOR LONG CAPTIONS,
%% SHORT CAPTIONS LEFT ALIGNED
\captionStyle{o}{l}
-\newcommand\killtableofcontents{
- \renewcommand\tableofcontents{}
+\newcommand\killtableofcontents{%
+ \renewcommand\tableofcontents{}%
}
%%LIST OF FIGURES HANDLING:
@@ -462,20 +540,20 @@
\newcounter{lofPrints} \setcounter{lofPrints}{0}
\let\oldlistoffigures\listoffigures
-\newcommand\killlistoffigures{
- \def\oldlistoffigures {}
- \renewcommand\listoffigures{}
+\newcommand\killlistoffigures{%
+ \def\oldlistoffigures {}%
+ \renewcommand\listoffigures{}%
}
-\newcommand\holdlistoffigures{
- \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}}
+\newcommand\holdlistoffigures{%
+ \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}}%
}
-\newcommand\clearlistoffigures{
- \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{
- \addtocounter{lofPrints}{1}
- \oldlistoffigures
- }
+\newcommand\clearlistoffigures{%
+ \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{%
+ \addtocounter{lofPrints}{1}%
+ \oldlistoffigures%
+ }%
}
%%LIST OF TABLES HANDLING:
@@ -483,20 +561,20 @@
\newcounter{lotPrints} \setcounter{lotPrints}{0}
\let\oldlistoftables\listoftables
-\newcommand\killlistoftables{
- \def\oldlistoftables {}
- \renewcommand\listoftables{}
+\newcommand\killlistoftables{%
+ \def\oldlistoftables {}%
+ \renewcommand\listoftables{}%
}
-\newcommand\holdlistoftables{
- \renewcommand\listoftables{\addtocounter{lotInvocations}{1}}
+\newcommand\holdlistoftables{%
+ \renewcommand\listoftables{\addtocounter{lotInvocations}{1}}%
}
-\newcommand\clearlistoftables{
- \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{
- \addtocounter{lotPrints}{1}
- \oldlistoftables
- }
+\newcommand\clearlistoftables{%
+ \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{%
+ \addtocounter{lotPrints}{1}%
+ \oldlistoftables%
+ }%
}
%% TO RETAIN BACKWARD COMPATIBILITY WITH THE PREDECESSOR TO boxhandler,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 19:06:56 +0000