diff options
author | Staszek Wawrykiewicz <staw@gust.org.pl> | 2008-07-12 17:39:20 +0000 |
---|---|---|
committer | Staszek Wawrykiewicz <staw@gust.org.pl> | 2008-07-12 17:39:20 +0000 |
commit | b33d141235bb67cb9b7a298e8a0a8d0c40bced17 (patch) | |
tree | bc681102c4ee579c3054257cea6412bfb9a3dbb1 /Master | |
parent | 506653395a7b7a9578fba4691f03a290eeffd564 (diff) |
texmf.cnf-4WIN deleted
git-svn-id: svn://tug.org/texlive/trunk@9481 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master')
-rw-r--r-- | Master/texmf/web2c/texmf.cnf-4WIN | 634 |
1 files changed, 0 insertions, 634 deletions
diff --git a/Master/texmf/web2c/texmf.cnf-4WIN b/Master/texmf/web2c/texmf.cnf-4WIN deleted file mode 100644 index a0273092a34..00000000000 --- a/Master/texmf/web2c/texmf.cnf-4WIN +++ /dev/null @@ -1,634 +0,0 @@ -% original texmf.cnf -- runtime path configuration file for kpathsea. -% (If you change or delete `original' on the previous line, the -% distribution won't install its version over yours.) -% Adapted for Win32 in TeX Live 2007 edition, this file should be -% copied to $TEXMFVAR/web2c/ -% Public domain. -% -% This TeX Live texmf.cnf is not kept in sync with the teTeX texmf.cnf -% (and not maintained by te), since the two distributions need different -% settings. -% -% What follows is a super-summary of what this .cnf file can -% contain. Please read the Kpathsea manual for more information. -% -% texmf.cnf is generated from texmf.in, by replacing @var@ with the -% value of the Make variable `var', via a sed file texmf.sed, generated -% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in -% by configure). -% -% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned. -% The `=' (and surrounding spaces) is optional. -% No % or @ in texmf.in, for the sake of autogeneration. -% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.) -% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo. -% -% Earlier entries (in the same or another file) override later ones, and -% an environment variable foo overrides any texmf.cnf definition of foo. -% -% All definitions are read before anything is expanded, so you can use -% variables before they are defined. -% -% If a variable assignment is qualified with `.PROGRAM', it is ignored -% unless the current executable (last filename component of argv[0]) is -% named PROGRAM. This foo.PROGRAM construct is not recognized on the -% right-hand side. For environment variables, use FOO_PROGRAM. -% -% Which file formats use which paths for searches is described in the -% various programs' and the kpathsea documentation. -% -% // means to search subdirectories (recursively). -% A leading !! means to look only in the ls-R db, never on the disk. -% A leading/trailing/doubled ; in the paths will be expanded into the -% compile-time default. Probably not what you want. -% -% You can use brace notation, for example: /usr/local/{mytex:othertex} -% expands to /usr/local/mytex:/usr/local/othertex. Instead of the path -% separator you can use a comma: /usr/local/{mytex,othertex} also expands -% to /usr/local/mytex:/usr/local/othertex. However, the use of the comma -% instead of the path separator is deprecated. -% -% The text above assumes thet path separator is a colon (:). Non-UNIX -% systems use different path separators, like the semicolon (;). - -% Part 1: Search paths and directories. - -% You can set an environment variable to override TEXMF if you're testing -% a new TeX tree, without changing anything else. -% -% You may wish to use one of the $SELFAUTO... variables here so TeX will -% find where to look dynamically. See the manual and the definition -% below of TEXMFCNF. - -% The tree containing the runtime files closely related to the specific -% program version used: -TEXMFMAIN = $SELFAUTOPARENT/texmf - -% The main distribution tree: -TEXMFDIST = $SELFAUTOPARENT/texmf-dist - -% A place for local additions to a "standard" texmf tree. -% This tree is not used for local configuration maintained by -% texconfig, it uses TEXMFCONFIG below. -TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local - -% TEXMFSYSVAR, where texconfig-sys stores variable runtime data. -% With teTeX-3.0 or later, this must be set. -% For sharing this tree with $TEXMFMAIN: -% TEXMFSYSVAR = $TEXMFMAIN -% For using a separate tree: -% TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var -%TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var - -% TEXMFSYSCONFIG, where texconfig-sys stores configuration data. -% With teTeX-3.0 or later, this must be set. -% For sharing this tree with $TEXMFMAIN: -% TEXMFSYSCONFIG = $TEXMFMAIN -% For using a separate tree: -% TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config -%TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config - -% User texmf trees are allowed as follows. -% This used to be HOMETEXMF. On Windows $HOME is usually not set, so users -% have to set TEXMFHOME to the absolute path. For the moment we use TEXMFLOCAL -%TEXMFHOME = $HOME/texmf -TEXMFHOME = $TEXMFLOCAL - -% TEXMFVAR, where texconfig stores variable runtime data. -% With teTeX-3.0 or later, this must be set. -% For sharing this tree with $TEXMFMAIN: -% TEXMFVAR = $TEXMFMAIN -% For using a separate tree: -% TEXMFVAR = $HOME/.texmf-var # teTeX 3.0 default -%TEXMFVAR = $HOME/.texlive2006/texmf-var -TEXMFVAR = $SELFAUTOPARENT/texmf-var - -% TEXMFCONFIG, where texconfig stores configuration data. -% With teTeX-3.0 or later, this must be set. -% For sharing this tree with $TEXMFMAIN: -% TEXMFCONFIG = $TEXMFMAIN -% For using a separate tree: -% TEXMFCONFIG = $HOME/.texmf-config # teTeX 3.0 default -% For using a separate tree: -% TEXMFCONFIG = $SELFAUTOPARENT/texmf-config -%TEXMFCONFIG = $HOME/.texlive2006/texmf-config - -% Now, list all the texmf trees. If you have multiple trees you can -% use shell brace notation, like this: -% TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN} -% The braces are necessary. -% -% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named -% explicitly and before all other trees. -%TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} -TEXMF = {!!$TEXMFVAR,$TEXMFHOME,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} - -% The system trees. These are the trees that are shared by all the users. -% If a tree appears in this list, the mktex* scripts will use -% VARTEXFONTS for generated files, if the original tree isn't writable; -% otherwise the current working directory is used. -SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST - -% Where generated fonts may be written. This tree is used when the sources -% were found in a system tree and either that tree wasn't writable, or the -% varfonts feature was enabled in MT_FEATURES in mktex.cnf. -VARTEXFONTS = $TEXMFVAR/fonts - -% Where to look for ls-R files. There need not be an ls-R in the -% directories in this path, but if there is one, Kpathsea will use it. -% -% By default, this is only the !! elements of TEXMF, so that mktexlsr -% does not create ls-R files in the non-!! elements -- because if an -% ls-R is present, it will be used, and the disk will not be searched. -% This is arguably a bug in kpathsea, but we will not think about it now. -TEXMFDBS = {!!$TEXMFVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} -%TEXMFDBS = $TEXMF - -% It may be convenient to define TEXMF like this: -% TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN,$HOME} -% which allows users to set up entire texmf trees, and tells TeX to -% look in places like ~/tex and ~/bibtex. If you do this, define TEXMFDBS -% like this: -% TEXMFDBS = $TEXMFHOME;$TEXMFLOCAL;$TEXMFMAIN;$VARTEXFONTS -% or mktexlsr will generate an ls-R file for $HOME when called, which is -% rarely desirable. If you do this you'll want to define SYSTEXMF like -% this: -% SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST -% so that fonts from a user's tree won't escape into the global trees. -% -% On some systems, there will be a system tree which contains all the font -% files that may be created as well as the formats. For example -% TEXMFVAR = /var/lib/texmf -% is used on many Linux systems. In this case, set VARTEXFONTS like this -% VARTEXFONTS = $TEXMFVAR/fonts -% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR). -% -% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below -% one of the TEXMF directories (avoids overlapping ls-R files). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% Usually you will not need to edit any of the other variables in part 1. % -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% WEB2C is for Web2C specific files. The current directory may not be -% a good place to look for them. -WEB2C = $TEXMF/web2c - -% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input -% or \openin, including .sty, .eps, etc. - -% Plain TeX. Have the command tex check all directories as a last -% resort, we may have plain-compatible stuff anywhere. -TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}// - -% Other plain-based formats. -TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}// -TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}// -TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}// -TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,plain,generic,}// -TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// - -% LaTeX 2e specific macros are stored in latex/, macros that can only be -% used with 2.09 in latex209/. In addition, we look in the directory -% latex209, useful for macros that were written for 2.09 and do not -% mention 2e at all, but can be used with 2e. -TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}// - -% Fontinst needs to read afm files. -TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}// - -% MLTeX. -TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}// -TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}// - -% e-TeX. This form of the input paths is borrowed from teTeX. A certain -% variant of TDS is assumed here, unaffected by the build variables. -TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}// - -% pdfTeX. This form of the input paths is borrowed from teTeX. A certain -% variant of TDS is assumed here, unaffected by the build variables. -TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,plain,generic,}// -TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// -TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}// - -% pdfeTeX. -TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}// - -% pdfxTeX. -TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}// - -% XeTeX -TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,generic,}// -TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,generic,}// -TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}// - -% Omega / Aleph -TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}// -TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}// - -% ConTeXt -TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}// - -% odd formats needing their own paths -TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}// -TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}// - -% Earlier entries override later ones, so put this last. -TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}// - -% extra format definitions for TeX Live - -TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}// -TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// -TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// - -TTF2TFMINPUTS = .;$TEXMF/ttf2pk// - -% Metafont, MetaPost inputs. -MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source// -MPINPUTS = .;$TEXMF/metapost// - -% allow for compressed files, and various extenions -TEXDOCSSUFFIX = ;.pdf;.ps;.dvi;.html;.txt;.tex -TEXDOCSCOMPRESS = ;.gz;.bz2;.zip;.Z -TEXDOCEXT = {$TEXDOCSSUFFIX}{$TEXDOCSCOMPRESS} - -% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL), -% and string pools (.pool) for ini{tex,mf,mp}. It is silly that we have six -% paths and directories here (they all resolve to a single place by default), -% but historically ... -TEXFORMATS = .;$TEXMF/web2c/{$engine,}// -MFBASES = .;$TEXMF/web2c/{$engine,}// -MPMEMS = .;$TEXMF/web2c/{$engine,}// -TEXPOOL = .;$TEXMF/web2c -MFPOOL = .;$TEXMF/web2c -MPPOOL = .;$TEXMF/web2c - -% support the original xdvi. Must come before the generic settings. -PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}// -VFFONTS.XDvi = .;$TEXMF/%s -PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}// -TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}// - -% Device-independent font metric files. -VFFONTS = .;$TEXMF/fonts/vf// -TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm// - -% The $MAKETEX_MODE below means the drivers will not use a cx font when -% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init -% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual. -% The modeless part guarantees that bitmaps for PostScript fonts are found. -PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}// - -% Similarly for the GF format, which only remains in existence because -% Metafont outputs it (and MF isn't going to change). -GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE// - -% A backup for PKFONTS and GFFONTS. Not used for anything. -GLYPHFONTS = .;$TEXMF/fonts - -% A place to puth everything that doesn't fit the other font categories. -MISCFONTS = .;$TEXMF/fonts/misc// - -% font name map files. This isn't just fonts/map// because ConTeXt -% wants support for having files with the same name in the different -% subdirs. Maybe if the programs ever get unified to accepting the same -% map file syntax the definition can be simplified again. -TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}// - -% BibTeX bibliographies and style files. -BIBINPUTS = .;$TEXMF/bibtex/bib// -BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}// -% For bibtex8. Do we really need to repeat the BIBINPUTS setting? -BIBINPUTS.bibtex8 = .;$TEXMF/bibtex/{bib,}// -BSTINPUTS.bibtex8 = .;$TEXMF/bibtex/{bst,csf,}// - -% MFT style files. -MFTINPUTS = .;$TEXMF/mft// - -% PostScript headers and prologues (.pro); unfortunately, some programs -% also use this for acessing font files (enc, type1, truetype) -TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}// -TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}// - -% OSFONTDIR is to provide a convenient hook for allowing TeX to find -% fonts installed on the system (outside of TeX). An empty default -% value would add "//" to the search paths, so we give it a dummy value. -%OSFONTDIR = /please/set/osfontdir/in/the/environment -OSFONTDIR = $SystemRoot/fonts// - -% PostScript Type 1 outline fonts. -T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR// - -% PostScript AFM metric files. -AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR// - -% TrueType outline fonts. -TTFONTS = .;$TEXMF/fonts/truetype//;$OSFONTDIR// - -% Opentype outline fonts. -OPENTYPEFONTS = .;$TEXMF/fonts/opentype//;$OSFONTDIR// - -% Type 42 outline fonts. -T42FONTS = .;$TEXMF/fonts/type42// - -% Ligature definition files. -LIGFONTS = .;$TEXMF/fonts/lig// - -% Dvips' config.* files (this name should not start with `TEX'!). -TEXCONFIG = $TEXMF/dvips// - -% Makeindex style (.ist) files. -INDEXSTYLE = .;$TEXMF/makeindex// - -% Font encoding files (.enc). -ENCFONTS = .;$TEXMF/fonts/enc// - -% CMap files. -CMAPFONTS = .;$TEXMF/fonts/cmap// - -% Subfont definition files. -SFDFONTS = .;$TEXMF/fonts/sfd// - -% OpenType outline fonts. -OPENTYPEFONTS = .;$TEXMF/fonts/opentype// - -% pdftex config files: -PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}// - -% Used by DMP (ditroff-to-mpx), called by makempx -troff. -TRFONTS = /usr/{local,}/share/groff/{current/font,site-font}/devps -MPSUPPORT = .;$TEXMF/metapost/support - -% For xdvi to find mime.types and .mailcap, if they do not exist in -% $HOME. These are single directories, not paths. -% (But the default mime.types, at least, may well suffice.) -MIMELIBDIR = $SELFAUTOPARENT/etc -MAILCAPLIBDIR = $SELFAUTOPARENT/etc - -% Default settings for fontconfig library, used by Win32 versions of -% xetex/xdvipdfmx (note that fontconfig on Linux/Unix-like systems -% will ignore settings in this file) -FONTCONFIG_FILE=fonts.conf -FONTCONFIG_PATH=$SELFAUTOLOC/conf -FC_CACHEDIR=$SELFAUTOLOC/cache - -% TeX documentation and source files, for use with kpsewhich. -% TeX Live has a separate hierarchy with just documentation, texmf-doc, -% in addition to the doc files in the other hierarchies. -TEXMFDOCDIR = $SELFAUTOPARENT/texmf-doc/doc -TEXDOCS = .;$TEXMF/doc//;$TEXMFDOCDIR// -TEXSOURCES = .;$TEXMF/source// - -% Web and CWeb input paths. -WEBINPUTS = .;$TEXMF/web// -CWEBINPUTS = .;$TEXMF/cweb// - -% Omega-related fonts and other files. The odd construction for OFMFONTS -% makes it behave in the face of a definition of TFMFONTS. Unfortunately -% no default substitution would take place for TFMFONTS, so an explicit -% path is retained. -OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}// -OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl// -OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}// -OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp// -OTPINPUTS = .;$TEXMF/omega/otp// -OCPINPUTS = .;$TEXMF/omega/ocp// - -% Some additional input variables for several programs. If you add -% a program that uses the 'other text files' or 'other binary files' -% search formats, you'll want to add their variables here as well. -T4HTINPUTS = .;$TEXMF/tex4ht// - -%% t4ht utility, sharing files with TeX4ht -TEX4HTFONTSET=alias,iso8859,unicode -TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}// - -% Part for scripts that are distributed/installed in the texmf tree. - -% Architecture independent executables. -TEXMFSCRIPTS = $TEXMF/scripts/{$engine,$progname,}// - -% Perl, Python, Ruby, Java scripts -JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java// -LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/lua// -PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl// -PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python// -RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby// - - -%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment. -% KPSE_DOT = . - -% This definition isn't used from this .cnf file itself (that would be -% paradoxical), but the compile-time default in paths.h is built from it. -% The SELFAUTO* variables are set automatically from the location of -% argv[0], in kpse_set_progname. -% -% The TETEXDIR stuff isn't likely to be relevant unless you're using -% teTeX, but it doesn't hurt. -% -% For security reasons, it is better not to have . part of the path. -% -TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c};/.$TETEXDIR - -# $progname: kpathsea v. 3.5.3 or later overwrites this at runtime. To -# avoid empty expansions from binaries linked against an earlier -# version of the library, we set $progname and $engine to something -# non-empty: -progname = unset -engine = unset - - -% Part 2: Non-path options. - -% Write .log/.dvi/etc. files here, if the current directory is unwritable. -% TEXMFOUTPUT = /tmp - -% If a dynamic file creation fails, log the command to this file, in -% either the current directory or TEXMFOUTPUT. Set to the -% empty string or 0 to avoid logging. -MISSFONT_LOG = missfont.log - -% Set to a colon-separated list of words specifying warnings to suppress. -% To suppress everything, use TEX_HUSH = all; this is currently equivalent to -% TEX_HUSH = checksum:lostchar:readable:special -% To suppress nothing, use TEX_HUSH = none or do not set the variable at all. -TEX_HUSH = none - -% Enable system commands via \write18{...}? -shell_escape = f - -% Allow TeX \openin, \openout, or \input on filenames starting with `.' -% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)? -% a (any) : any file can be opened. -% r (restricted) : disallow opening "dotfiles". -% p (paranoid) : as 'r' and disallow going to parent directories, and -% restrict absolute paths to be under $TEXMFOUTPUT. -openout_any = p -openin_any = a - -% Disable search on multiple suffixes filenames. In many case, when `foo.bar' -% is looked for, you do not want to look for `foo.bar.tex' before. This flag -% disables searching for standard suffixes if the file name has already an -% extension of 3 characters. Default value is true (old behaviour). -allow_multiple_suffixes = f - -% Allow TeX, MF, and MP to parse the first line of an input file for -% the %&format construct. -parse_first_line = t - -% But don't parse the first line if invoked as "tex", since we want that -% to remain Knuth-compatible. The src_specials and -% file_line_error_style settings, as well as the options -enctex, -% -mltex, -8bit, etc., also affect this, but they are all off by default. -parse_first_line.tex = f - -% Control file:line:error style messages. -file_line_error_style = f - -% Enable the mktex... scripts by default? These must be set to 0 or 1. -% Particular programs can and do override these settings, for example -% dvips's -M option. Your first chance to specify whether the scripts -% are invoked by default is at configure time. -% -% These values are ignored if the script names are changed; e.g., if you -% set DVIPSMAKEPK to `foo', what counts is the value of the environment -% variable/config value `FOO', not the `MKTEXPK' value. -% -% MKTEXTEX = 0 -% MKTEXPK = 0 -% MKTEXMF = 0 -% MKTEXTFM = 0 -% MKTEXFMT = 0 -% MKOCP = 0 -% MKOFM = 0 - -% What MetaPost runs to make MPX files. This is passed an option -troff -% if MP is in troff mode. Set to `0' to disable this feature. -MPXCOMMAND = makempx - -% Used by makempx to run TeX. We use "etex" because MetaPost is -% expecting DVI, and not "tex" because we want first line parsing. -TEX = etex - - -% Part 3: Array and other sizes for TeX (and Metafont and MetaPost). -% -% If you want to change some of these sizes only for a certain TeX -% variant, the usual dot notation works, e.g., -% main_memory.hugetex = 20000000 -% -% If a change here appears to be ignored, try redumping the format file. - -% Memory. Must be less than 8,000,000 total. -% -% main_memory is relevant only to initex, extra_mem_* only to non-ini. -% Thus, have to redump the .fmt file after changing main_memory; to add -% to existing fmt files, increase extra_mem_*. (To get an idea of how -% much, try \tracingstats=2 in your TeX source file; -% web2c/tests/memtest.tex might also be interesting.) -% -% To increase space for boxes (as might be needed by, e.g., PiCTeX), -% increase extra_mem_bot. -% -% For some xy-pic samples, you may need as much as 700000 words of memory. -% For the vast majority of documents, 60000 or less will do. -% -main_memory = 1500000 % words of inimemory available; also applies to inimf&mp -extra_mem_top = 0 % extra high memory for chars, tokens, etc. -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc. - -% ConTeXt needs lots of memory. -extra_mem_top.context = 2000000 -extra_mem_bot.context = 4000000 - -% Words of font info for TeX (total size of all TFM files, approximately). -% Must be >= 20000 and <= 4000000 (without tex.ch changes). -font_mem_size = 1200000 - -% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes). -font_max = 2000 - -% Extra space for the hash table of control sequences (which allows 10K -% names as distributed). -hash_extra = 50000 - -% Max number of characters in all strings, including all error messages, -% help texts, font names, control sequences. These values apply to TeX and MP. -pool_size = 1250000 -% Minimum pool space after TeX/MP's own strings; must be at least -% 25000 less than pool_size, but doesn't need to be nearly that large. -string_vacancies = 90000 -% Maximum number of strings. -max_strings = 100000 -% min pool space left after loading .fmt -pool_free = 47500 - -% Buffer size. TeX uses the buffer to contain input lines, but macro -% expansion works by writing material into the buffer and reparsing the -% line. As a consequence, certain constructs require the buffer to be -% very large, even though most documents can be handled with a small value. -buf_size = 200000 - -% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in -% the sources), but we don't need that much. The value here suffices -% for all known free hyphenation patterns to be loaded simultaneously -% (as TeX Live does). -% -trie_size = 300000 - -hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767. - % http://primes.utm.edu/curios/page.php/8191.html -nest_size = 500 % simultaneous semantic levels (e.g., groups) -max_in_open = 15 % simultaneous input files and error insertions -param_size = 10000 % simultaneous macro parameters -save_size = 5000 % for saving values outside current group -stack_size = 5000 % simultaneous input sources - -% These are Omega-specific. -ocp_buf_size = 500000 % character buffers for ocp filters. -ocp_stack_size = 10000 % stacks for ocp computations. -ocp_list_size = 1000 % control for multiple ocps. - -% Parameter specific to MetaPost. -% Maximum number of knots between breakpoints of a path. -% Set to 2000 by default. -% path_size.mpost = 10000 - -% These work best if they are the same as the I/O buffer size, but it -% doesn't matter much. Must be a multiple of 8. -dvi_buf_size = 16384 % TeX -gf_buf_size = 16384 % MF - -% It's probably inadvisable to change these. At any rate, we must have: -% 45 < error_line < 255; -% 30 < half_error_line < error_line - 15; -% 60 <= max_print_line; -% These apply to Metafont and MetaPost as well. -error_line = 79 -half_error_line = 50 -max_print_line = 79 |