perl 5.14.2 from siep

git-svn-id: svn://tug.org/texlive/trunk@26525 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 198 insertions, 137 deletions

diff --git a/Master/tlpkg/tlperl/lib/pods/perlrebackslash.pod b/Master/tlpkg/tlperl/lib/pods/perlrebackslash.pod
index 489ba2b648f..8f2490d78ee 100644
--- a/Master/tlpkg/tlperl/lib/pods/perlrebackslash.pod
+++ b/Master/tlpkg/tlperl/lib/pods/perlrebackslash.pod
@@ -25,14 +25,14 @@ or it is the start of a backslash or escape sequence.
 
 The rules determining what it is are quite simple: if the character
 following the backslash is an ASCII punctuation (non-word) character (that is,
-anything that is not a letter, digit or underscore), then the backslash just
-takes away the special meaning (if any) of the character following it.
+anything that is not a letter, digit, or underscore), then the backslash just
+takes away any special meaning of the character following it.
 
 If the character following the backslash is an ASCII letter or an ASCII digit,
 then the sequence may be special; if so, it's listed below. A few letters have
 not been used yet, so escaping them with a backslash doesn't change them to be
 special.  A future version of Perl may assign a special meaning to them, so if
-you have warnings turned on, Perl will issue a warning if you use such a
+you have warnings turned on, Perl issues a warning if you use such a
 sequence.  [1].
 
 It is however guaranteed that backslash or escape sequences never have a
@@ -48,9 +48,9 @@ backslash.
 
 =item [1]
 
-There is one exception. If you use an alphanumerical character as the
+There is one exception. If you use an alphanumeric character as the
 delimiter of your pattern (which you probably shouldn't do for readability
-reasons), you will have to escape the delimiter if you want to match
+reasons), you have to escape the delimiter if you want to match
 it. Perl won't warn then. See also L<perlop/Gory details of parsing
 quoted constructs>.
 
@@ -62,7 +62,7 @@ quoted constructs>.
 Those not usable within a bracketed character class (like C<[\da-z]>) are marked
 as C<Not in [].>
 
- \000              Octal escape sequence.
+ \000              Octal escape sequence.  See also \o{}.
  \1                Absolute backreference.  Not in [].
  \a                Alarm or bell.
  \A                Beginning of string.  Not in [].
@@ -75,7 +75,7 @@ as C<Not in [].>
  \e                Escape character.
  \E                Turn off \Q, \L and \U processing.  Not in [].
  \f                Form feed.
- \g{}, \g1         Named, absolute or relative backreference.  Not in [].
+ \g{}, \g1         Named, absolute or relative backreference.  Not in []
  \G                Pos assertion.  Not in [].
  \h                Character class for horizontal whitespace.
  \H                Character class for non horizontal whitespace.
@@ -85,7 +85,8 @@ as C<Not in [].>
  \L                Lowercase till \E.  Not in [].
  \n                (Logical) newline character.
  \N                Any character but newline.  Experimental.  Not in [].
- \N{}              Named or numbered (Unicode) character.
+ \N{}              Named or numbered (Unicode) character or sequence.
+ \o{}              Octal escape sequence.
  \p{}, \pP         Character with the given Unicode property.
  \P{}, \PP         Character without the given Unicode property.
  \Q                Quotemeta till \E.  Not in [].
@@ -133,7 +134,7 @@ character class, C<\b> is a word/non-word boundary.
 
 =item [2]
 
-C<\n> matches a logical newline. Perl will convert between C<\n> and your
+C<\n> matches a logical newline. Perl converts between C<\n> and your
 OS's native newline character when reading from or writing to text files.
 
 =back
@@ -164,38 +165,39 @@ Mnemonic: I<c>ontrol character.
 
  $str =~ /\cK/;  # Matches if $str contains a vertical tab (control-K).
 
-=head3 Named or numbered characters
+=head3 Named or numbered characters and character sequences
 
-Unicode characters have a Unicode name and numeric ordinal value.  Use the
+Unicode characters have a Unicode name and numeric code point (ordinal)
+value.  Use the
 C<\N{}> construct to specify a character by either of these values.
+Certain sequences of characters also have names.
 
-To specify by name, the name of the character goes between the curly braces.
-In this case, you have to C<use charnames> to load the Unicode names of the
-characters, otherwise Perl will complain.
+To specify by name, the name of the character or character sequence goes
+between the curly braces.  In this case, you have to C<use charnames> to
+load the Unicode names of the characters; otherwise Perl will complain.
 
-To specify by Unicode ordinal number, use the form
-C<\N{U+I<wide hex character>}>, where I<wide hex character> is a number in
-hexadecimal that gives the ordinal number that Unicode has assigned to the
-desired character.  It is customary (but not required) to use leading zeros to
-pad the number to 4 digits.  Thus C<\N{U+0041}> means
-C<Latin Capital Letter A>, and you will rarely see it written without the two
-leading zeros.  C<\N{U+0041}> means "A" even on EBCDIC machines (where the
-ordinal value of "A" is not 0x41).
+To specify a character by Unicode code point, use the form C<\N{U+I<code
+point>}>, where I<code point> is a number in hexadecimal that gives the
+code point that Unicode has assigned to the desired character.  It is
+customary but not required to use leading zeros to pad the number to 4
+digits.  Thus C<\N{U+0041}> means C<LATIN CAPITAL LETTER A>, and you will
+rarely see it written without the two leading zeros.  C<\N{U+0041}> means
+"A" even on EBCDIC machines (where the ordinal value of "A" is not 0x41).
 
-It is even possible to give your own names to characters, and even to short
-sequences of characters.  For details, see L<charnames>.
+It is even possible to give your own names to characters and character
+sequences.  For details, see L<charnames>.
 
 (There is an expanded internal form that you may see in debug output:
-C<\N{U+I<wide hex character>.I<wide hex character>...}>.
-The C<...> means any number of these I<wide hex character>s separated by dots.
+C<\N{U+I<code point>.I<code point>...}>.
+The C<...> means any number of these I<code point>s separated by dots.
 This represents the sequence formed by the characters.  This is an internal
 form only, subject to change, and you should not try to use it yourself.)
 
 Mnemonic: I<N>amed character.
 
-Note that a character that is expressed as a named or numbered character is
-considered as a character without special meaning by the regex engine, and will
-match "as is".
+Note that a character or character sequence expressed as a named
+or numbered character is considered a character without special
+meaning by the regex engine, and will match "as is".
 
 =head4 Example
 
@@ -207,30 +209,56 @@ match "as is".
 
 =head3 Octal escapes
 
-Octal escapes consist of a backslash followed by two or three octal digits
-matching the code point of the character you want to use. This allows for
-512 characters (C<\00> up to C<\777>) that can be expressed this way (but
-anything above C<\377> is deprecated).
-Enough in pre-Unicode days, but most Unicode characters cannot be escaped
-this way.
-
-Note that a character that is expressed as an octal escape is considered
-as a character without special meaning by the regex engine, and will match
+There are two forms of octal escapes.  Each is used to specify a character by
+its code point specified in octal notation.
+
+One form, available starting in Perl 5.14 looks like C<\o{...}>, where the dots
+represent one or more octal digits.  It can be used for any Unicode character.
+
+It was introduced to avoid the potential problems with the other form,
+available in all Perls.  That form consists of a backslash followed by three
+octal digits.  One problem with this form is that it can look exactly like an
+old-style backreference (see
+L</Disambiguation rules between old-style octal escapes and backreferences>
+below.)  You can avoid this by making the first of the three digits always a
+zero, but that makes \077 the largest code point specifiable.
+
+In some contexts, a backslash followed by two or even one octal digits may be
+interpreted as an octal escape, sometimes with a warning, and because of some
+bugs, sometimes with surprising results.  Also, if you are creating a regex
+out of smaller snippets concatenated together, and you use fewer than three
+digits, the beginning of one snippet may be interpreted as adding digits to the
+ending of the snippet before it.  See L</Absolute referencing> for more
+discussion and examples of the snippet problem.
+
+Note that a character expressed as an octal escape is considered
+a character without special meaning by the regex engine, and will match
 "as is".
 
-=head4 Examples (assuming an ASCII platform)
+To summarize, the C<\o{}> form is always safe to use, and the other form is
+safe to use for code points through \077 when you use exactly three digits to
+specify them.
 
- $str = "Perl";
- $str =~ /\120/;    # Match, "\120" is "P".
- $str =~ /\120+/;   # Match, "\120" is "P", it is repeated at least once.
- $str =~ /P\053/;   # No match, "\053" is "+" and taken literally.
+Mnemonic: I<0>ctal or I<o>ctal.
 
-=head4 Caveat
+=head4 Examples (assuming an ASCII platform)
 
-Octal escapes potentially clash with backreferences. They both consist
-of a backslash followed by numbers. So Perl has to use heuristics to
-determine whether it is a backreference or an octal escape. Perl uses
-the following rules:
+ $str = "Perl";
+ $str =~ /\o{120}/;  # Match, "\120" is "P".
+ $str =~ /\120/;     # Same.
+ $str =~ /\o{120}+/; # Match, "\120" is "P", it's repeated at least once
+ $str =~ /\120+/;    # Same.
+ $str =~ /P\053/;    # No match, "\053" is "+" and taken literally.
+ /\o{23073}/         # Black foreground, white background smiling face.
+ /\o{4801234567}/    # Raises a warning, and yields chr(4)
+
+=head4 Disambiguation rules between old-style octal escapes and backreferences
+
+Octal escapes of the C<\000> form outside of bracketed character classes
+potentially clash with old-style backreferences.  (see L</Absolute referencing>
+below).  They both consist of a backslash followed by numbers.  So Perl has to
+use heuristics to determine whether it is a backreference or an octal escape.
+Perl uses the following rules to disambiguate:
 
 =over 4
 
@@ -244,30 +272,35 @@ If the first digit following the backslash is a 0, it's an octal escape.
 
 =item 3
 
-If the number following the backslash is N (in decimal), and Perl already has
-seen N capture groups, Perl will consider this to be a backreference.
-Otherwise, it will consider it to be an octal escape. Note that if N has more
-than three digits, Perl only takes the first three for the octal escape;
-the rest are matched as is.
+If the number following the backslash is N (in decimal), and Perl already
+has seen N capture groups, Perl considers this a backreference.  Otherwise,
+it considers it an octal escape. If N has more than three digits, Perl
+takes only the first three for the octal escape; the rest are matched as is.
 
  my $pat  = "(" x 999;
     $pat .= "a";
     $pat .= ")" x 999;
  /^($pat)\1000$/;   #  Matches 'aa'; there are 1000 capture groups.
  /^$pat\1000$/;     #  Matches 'a@0'; there are 999 capture groups
-                    #    and \1000 is seen as \100 (a '@') and a '0'.
+                    #    and \1000 is seen as \100 (a '@') and a '0'
 
 =back
 
+You can force a backreference interpretation always by using the C<\g{...}>
+form.  You can the force an octal interpretation always by using the C<\o{...}>
+form, or for numbers up through \077 (= 63 decimal), by using three digits,
+beginning with a "0".
+
 =head3 Hexadecimal escapes
 
-Hexadecimal escapes start with C<\x> and are then either followed by a
-two digit hexadecimal number, or a hexadecimal number of arbitrary length
-surrounded by curly braces. The hexadecimal number is the code point of
-the character you want to express.
+Like octal escapes, there are two forms of hexadecimal escapes, but both start
+with the same thing, C<\x>.  This is followed by either exactly two hexadecimal
+digits forming a number, or a hexadecimal number of arbitrary length surrounded
+by curly braces. The hexadecimal number is the code point of the character you
+want to express.
 
-Note that a character that is expressed as a hexadecimal escape is considered
-as a character without special meaning by the regex engine, and will match
+Note that a character expressed as one of these escapes is considered a
+character without special meaning by the regex engine, and will match
 "as is".
 
 Mnemonic: heI<x>adecimal.
@@ -276,7 +309,7 @@ Mnemonic: heI<x>adecimal.
 
  $str = "Perl";
  $str =~ /\x50/;    # Match, "\x50" is "P".
- $str =~ /\x50+/;   # Match, "\x50" is "P", it is repeated at least once.
+ $str =~ /\x50+/;   # Match, "\x50" is "P", it is repeated at least once
  $str =~ /P\x2B/;   # No match, "\x2B" is "+" and taken literally.
 
  /\x{2603}\x{2602}/ # Snowman with an umbrella.
@@ -290,20 +323,20 @@ Mnemonic: heI<x>adecimal.
 A number of backslash sequences have to do with changing the character,
 or characters following them. C<\l> will lowercase the character following
 it, while C<\u> will uppercase (or, more accurately, titlecase) the
-character following it. (They perform similar functionality as the
-functions C<lcfirst> and C<ucfirst>).
+character following it. They provide functionality similar to the
+functions C<lcfirst> and C<ucfirst>.
 
 To uppercase or lowercase several characters, one might want to use
 C<\L> or C<\U>, which will lowercase/uppercase all characters following
-them, until either the end of the pattern, or the next occurrence of
-C<\E>, whatever comes first. They perform similar functionality as the
-functions C<lc> and C<uc> do.
+them, until either the end of the pattern or the next occurrence of
+C<\E>, whichever comes first. They provide functionality similar to what
+the functions C<lc> and C<uc> provide.
 
 C<\Q> is used to escape all characters following, up to the next C<\E>
 or the end of the pattern. C<\Q> adds a backslash to any character that
-isn't a letter, digit or underscore. This will ensure that any character
-between C<\Q> and C<\E> is matched literally, and will not be interpreted
-by the regexp engine.
+isn't a letter, digit, or underscore. This ensures that any character
+between C<\Q> and C<\E> shall be matched literally, not interpreted
+as a metacharacter by the regex engine.
 
 Mnemonic: I<L>owercase, I<U>ppercase, I<Q>uotemeta, I<E>nd.
 
@@ -324,15 +357,22 @@ the character classes are written as a backslash sequence. We will briefly
 discuss those here; full details of character classes can be found in
 L<perlrecharclass>.
 
-C<\w> is a character class that matches any single I<word> character (letters,
-digits, underscore). C<\d> is a character class that matches any decimal digit,
-while the character class C<\s> matches any whitespace character.
+C<\w> is a character class that matches any single I<word> character
+(letters, digits, Unicode marks, and connector punctuation (like the
+underscore)).  C<\d> is a character class that matches any decimal
+digit, while the character class C<\s> matches any whitespace character.
 New in perl 5.10.0 are the classes C<\h> and C<\v> which match horizontal
 and vertical whitespace characters.
 
+The exact set of characters matched by C<\d>, C<\s>, and C<\w> varies
+depending on various pragma and regular expression modifiers.  It is
+possible to restrict the match to the ASCII range by using the C</a>
+regular expression modifier.  See L<perlrecharclass>.
+
 The uppercase variants (C<\W>, C<\D>, C<\S>, C<\H>, and C<\V>) are
-character classes that match any character that isn't a word character,
-digit, whitespace, horizontal whitespace nor vertical whitespace.
+character classes that match, respectively, any character that isn't a
+word character, digit, whitespace, horizontal whitespace, or vertical
+whitespace.
 
 Mnemonics: I<w>ord, I<d>igit, I<s>pace, I<h>orizontal, I<v>ertical.
 
@@ -348,7 +388,6 @@ L<perlunicode/Unicode Character Properties>.
 
 Mnemonic: I<p>roperty.
 
-
 =head2 Referencing
 
 If capturing parenthesis are used in a regular expression, we can refer
@@ -360,41 +399,51 @@ absolutely, relatively, and by name.
 
 =head3 Absolute referencing
 
-A backslash sequence that starts with a backslash and is followed by a
-number is an absolute reference (but be aware of the caveat mentioned above).
-If the number is I<N>, it refers to the Nth set of parentheses - whatever
-has been matched by that set of parenthesis has to be matched by the C<\N>
-as well.
+Either C<\gI<N>> (starting in Perl 5.10.0), or C<\I<N>> (old-style) where I<N>
+is a positive (unsigned) decimal number of any length is an absolute reference
+to a capturing group.
+
+I<N> refers to the Nth set of parentheses, so C<\gI<N>> refers to whatever has
+been matched by that set of parentheses.  Thus C<\g1> refers to the first
+capture group in the regex.
+
+The C<\gI<N>> form can be equivalently written as C<\g{I<N>}>
+which avoids ambiguity when building a regex by concatenating shorter
+strings.  Otherwise if you had a regex C<qr/$a$b/>, and C<$a> contained
+C<"\g1">, and C<$b> contained C<"37">, you would get C</\g137/> which is
+probably not what you intended.
+
+In the C<\I<N>> form, I<N> must not begin with a "0", and there must be at
+least I<N> capturing groups, or else I<N> is considered an octal escape
+(but something like C<\18> is the same as C<\0018>; that is, the octal escape
+C<"\001"> followed by a literal digit C<"8">).
+
+Mnemonic: I<g>roup.
 
 =head4 Examples
 
- /(\w+) \1/;    # Finds a duplicated word, (e.g. "cat cat").
- /(.)(.)\2\1/;  # Match a four letter palindrome (e.g. "ABBA").
+ /(\w+) \g1/;    # Finds a duplicated word, (e.g. "cat cat").
+ /(\w+) \1/;     # Same thing; written old-style
+ /(.)(.)\g2\g1/;  # Match a four letter palindrome (e.g. "ABBA").
 
 
 =head3 Relative referencing
 
-New in perl 5.10.0 is a different way of referring to capture buffers: C<\g>.
-C<\g> takes a number as argument, with the number in curly braces (the
-braces are optional). If the number (N) does not have a sign, it's a reference
-to the Nth capture group (so C<\g{2}> is equivalent to C<\2> - except that
-C<\g> always refers to a capture group and will never be seen as an octal
-escape). If the number is negative, the reference is relative, referring to
-the Nth group before the C<\g{-N}>.
+C<\g-I<N>> (starting in Perl 5.10.0) is used for relative addressing.  (It can
+be written as C<\g{-I<N>>.)  It refers to the I<N>th group before the
+C<\g{-I<N>}>.
 
-The big advantage of C<\g{-N}> is that it makes it much easier to write
+The big advantage of this form is that it makes it much easier to write
 patterns with references that can be interpolated in larger patterns,
 even if the larger pattern also contains capture groups.
 
-Mnemonic: I<g>roup.
-
 =head4 Examples
 
- /(A)        # Buffer 1
-  (          # Buffer 2
-    (B)      # Buffer 3
-    \g{-1}   # Refers to buffer 3 (B)
-    \g{-3}   # Refers to buffer 1 (A)
+ /(A)        # Group 1
+  (          # Group 2
+    (B)      # Group 3
+    \g{-1}   # Refers to group 3 (B)
+    \g{-3}   # Refers to group 1 (A)
   )
  /x;         # Matches "ABBA".
 
@@ -403,17 +452,15 @@ Mnemonic: I<g>roup.
 
 =head3 Named referencing
 
-Also new in perl 5.10.0 is the use of named capture buffers, which can be
-referred to by name. This is done with C<\g{name}>, which is a
-backreference to the capture buffer with the name I<name>.
+C<\g{I<name>}> (starting in Perl 5.10.0) can be used to back refer to a
+named capture group, dispensing completely with having to think about capture
+buffer positions.
 
 To be compatible with .Net regular expressions, C<\g{name}> may also be
 written as C<\k{name}>, C<< \k<name> >> or C<\k'name'>.
 
-Note that C<\g{}> has the potential to be ambiguous, as it could be a named
-reference, or an absolute or relative reference (if its argument is numeric).
-However, names are not allowed to start with digits, nor are they allowed to
-contain a hyphen, so there is no ambiguity.
+To prevent any ambiguity, I<name> must not start with a digit nor contain a
+hyphen.
 
 =head4 Examples
 
@@ -434,7 +481,7 @@ backslash sequences.
 =item \A
 
 C<\A> only matches at the beginning of the string. If the C</m> modifier
-isn't used, then C</\A/> is equivalent with C</^/>. However, if the C</m>
+isn't used, then C</\A/> is equivalent to C</^/>. However, if the C</m>
 modifier is used, then C</^/> matches internal newlines, but the meaning
 of C</\A/> isn't changed by the C</m> modifier. C<\A> matches at the beginning
 of the string regardless whether the C</m> modifier is used.
@@ -442,26 +489,27 @@ of the string regardless whether the C</m> modifier is used.
 =item \z, \Z
 
 C<\z> and C<\Z> match at the end of the string. If the C</m> modifier isn't
-used, then C</\Z/> is equivalent with C</$/>, that is, it matches at the
-end of the string, or before the newline at the end of the string. If the
+used, then C</\Z/> is equivalent to C</$/>; that is, it matches at the
+end of the string, or one before the newline at the end of the string. If the
 C</m> modifier is used, then C</$/> matches at internal newlines, but the
 meaning of C</\Z/> isn't changed by the C</m> modifier. C<\Z> matches at
 the end of the string (or just before a trailing newline) regardless whether
 the C</m> modifier is used.
 
-C<\z> is just like C<\Z>, except that it will not match before a trailing
-newline. C<\z> will only match at the end of the string - regardless of the
-modifiers used, and not before a newline.
+C<\z> is just like C<\Z>, except that it does not match before a trailing
+newline. C<\z> matches at the end of the string only, regardless of the
+modifiers used, and not just before a newline.  It is how to anchor the
+match to the true end of the string under all conditions.
 
 =item \G
 
-C<\G> is usually only used in combination with the C</g> modifier. If the
-C</g> modifier is used (and the match is done in scalar context), Perl will
-remember where in the source string the last match ended, and the next time,
+C<\G> is usually used only in combination with the C</g> modifier. If the
+C</g> modifier is used and the match is done in scalar context, Perl 
+remembers where in the source string the last match ended, and the next time,
 it will start the match from where it ended the previous time.
 
-C<\G> matches the point where the previous match ended, or the beginning
-of the string if there was no previous match.
+C<\G> matches the point where the previous match on that string ended, 
+or the beginning of that string if there was no previous match.
 
 =for later add link to perlremodifiers
 
@@ -474,7 +522,17 @@ matches at any place between characters where C<\b> doesn't match. C<\b>
 and C<\B> assume there's a non-word character before the beginning and after
 the end of the source string; so C<\b> will match at the beginning (or end)
 of the source string if the source string begins (or ends) with a word
-character. Otherwise, C<\B> will match.
+character. Otherwise, C<\B> will match.   
+
+Do not use something like C<\b=head\d\b> and expect it to match the
+beginning of a line.  It can't, because for there to be a boundary before
+the non-word "=", there must be a word character immediately previous.  
+All boundary determinations look for word characters alone, not for
+non-words characters nor for string ends.  It may help to understand how
+<\b> and <\B> work by equating them as follows:
+
+    \b	really means	(?:(?<=\w)(?!\w)|(?<!\w)(?=\w))
+    \B	really means	(?:(?<=\w)(?=\w)|(?<!\w)(?!\w))
 
 Mnemonic: I<b>oundary.
 
@@ -502,7 +560,7 @@ Mnemonic: I<b>oundary.
 =head2 Misc
 
 Here we document the backslash sequences that don't fall in one of the
-categories above. They are:
+categories above. These are:
 
 =over 4
 
@@ -510,46 +568,49 @@ categories above. They are:
 
 C<\C> always matches a single octet, even if the source string is encoded
 in UTF-8 format, and the character to be matched is a multi-octet character.
-C<\C> was introduced in perl 5.6.
+C<\C> was introduced in perl 5.6.  This is very dangerous, because it violates
+the logical character abstraction and can cause UTF-8 sequences to become malformed.
 
 Mnemonic: oI<C>tet.
 
 =item \K
 
-This is new in perl 5.10.0. Anything that is matched left of C<\K> is
-not included in C<$&> - and will not be replaced if the pattern is
-used in a substitution. This will allow you to write C<s/PAT1 \K PAT2/REPL/x>
+This appeared in perl 5.10.0. Anything matched left of C<\K> is
+not included in C<$&>, and will not be replaced if the pattern is
+used in a substitution. This lets you write C<s/PAT1 \K PAT2/REPL/x>
 instead of C<s/(PAT1) PAT2/${1}REPL/x> or C<s/(?<=PAT1) PAT2/REPL/x>.
 
 Mnemonic: I<K>eep.
 
 =item \N
 
-This is a new experimental feature in perl 5.12.0.  It matches any character
-that is not a newline.  It is a short-hand for writing C<[^\n]>, and is
+This is an experimental feature new to perl 5.12.0.  It matches any character
+that is B<not> a newline.  It is a short-hand for writing C<[^\n]>, and is
 identical to the C<.> metasymbol, except under the C</s> flag, which changes
 the meaning of C<.>, but not C<\N>.
 
 Note that C<\N{...}> can mean a
-L<named or numbered character|/Named or numbered characters>.
+L<named or numbered character
+|/Named or numbered characters and character sequences>.
 
 Mnemonic: Complement of I<\n>.
 
 =item \R
 X<\R>
 
-C<\R> matches a I<generic newline>, that is, anything that is considered
-a newline by Unicode. This includes all characters matched by C<\v>
-(vertical whitespace), and the multi character sequence C<"\x0D\x0A">
-(carriage return followed by a line feed, aka the network newline, or
-the newline used in Windows text files). C<\R> is equivalent to
-C<< (?>\x0D\x0A)|\v) >>. Since C<\R> can match a sequence of more than one
-character, it cannot be put inside a bracketed character class; C</[\R]/> is an
-error; use C<\v> instead.  C<\R> was introduced in perl 5.10.0.
+C<\R> matches a I<generic newline>; that is, anything considered a
+linebreak sequence by Unicode. This includes all characters matched by
+C<\v> (vertical whitespace), and the multi character sequence C<"\x0D\x0A">
+(carriage return followed by a line feed, sometimes called the network
+newline; it's the end of line sequence used in Microsoft text files opened
+in binary mode). C<\R> is equivalent to C<< (?>\x0D\x0A)|\v) >>. Since
+C<\R> can match a sequence of more than one character, it cannot be put
+inside a bracketed character class; C</[\R]/> is an error; use C<\v>
+instead.  C<\R> was introduced in perl 5.10.0.
 
 Mnemonic: none really. C<\R> was picked because PCRE already uses C<\R>,
 and more importantly because Unicode recommends such a regular expression
-metacharacter, and suggests C<\R> as the notation.
+metacharacter, and suggests C<\R> as its notation.
 
 =item \X
 X<\X>
@@ -569,15 +630,15 @@ Mnemonic: eI<X>tended Unicode character.
 
 =head4 Examples
 
- "\x{256}" =~ /^\C\C$/;    # Match as chr (256) takes 2 octets in UTF-8.
+ "\x{256}" =~ /^\C\C$/;    # Match as chr (0x256) takes 2 octets in UTF-8.
 
- $str =~ s/foo\Kbar/baz/g; # Change any 'bar' following a 'foo' to 'baz'.
- $str =~ s/(.)\K\1//g;     # Delete duplicated characters.
+ $str =~ s/foo\Kbar/baz/g; # Change any 'bar' following a 'foo' to 'baz'
+ $str =~ s/(.)\K\g1//g;    # Delete duplicated characters.
 
  "\n"   =~ /^\R$/;         # Match, \n   is a generic newline.
  "\r"   =~ /^\R$/;         # Match, \r   is a generic newline.
  "\r\n" =~ /^\R$/;         # Match, \r\n is a generic newline.
 
- "P\x{0307}" =~ /^\X$/     # \X matches a P with a dot above.
+ "P\x{307}" =~ /^\X$/     # \X matches a P with a dot above.
 
 =cut