adjustbox 0.2 (28jan11)

git-svn-id: svn://tug.org/texlive/trunk@21199 c570f23f-e606-0410-a88d-b1316a301751

6 files changed, 800 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/adjustbox/adjustbox.pdf b/Master/texmf-dist/doc/latex/adjustbox/adjustbox.pdf
new file mode 100644
index 00000000000..9dba5c438ba
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/adjustbox/adjustbox.pdf
diff --git a/Master/texmf-dist/source/latex/adjustbox/Makefile b/Master/texmf-dist/source/latex/adjustbox/Makefile
new file mode 100644
index 00000000000..2bb55c3d056
--- /dev/null
+++ b/Master/texmf-dist/source/latex/adjustbox/Makefile
@@ -0,0 +1,86 @@
+TEXMF=${HOME}/texmf
+INSTALLDIR=${TEXMF}/tex/latex/adjustbox
+DOCINSTALLDIR=${TEXMF}/doc/latex/adjustbox
+CP=cp
+RMDIR=rm -rf
+PDFLATEX=pdflatex -interaction=batchmode
+LATEXMK=latexmk -pdf -silent
+
+PACKEDFILES=adjustbox.sty
+DOCFILES=adjustbox.pdf
+SRCFILES=adjustbox.dtx adjustbox.ins README Makefile
+
+all: unpack doc
+
+package: unpack
+class: unpack
+
+${PACKEDFILES}: adjustbox.dtx adjustbox.ins
+	yes | pdflatex adjustbox.ins
+
+unpack: ${PACKEDFILES}
+
+# 'doc' and 'adjustbox.pdf' call itself until everything is stable
+doc: adjustbox.pdf
+	@${MAKE} --no-print-directory adjustbox.pdf
+
+pdfopt: doc
+	@-pdfopt adjustbox.pdf .temp.pdf && mv .temp.pdf adjustbox.pdf
+
+adjustbox.pdf: adjustbox.dtx adjustbox.gls adjustbox.ind
+	${LATEXMK} adjustbox.dtx
+
+adjustbox.idx adjustbox.glo: adjustbox.dtx
+	${LATEXMK} adjustbox.dtx
+
+adjustbox.ind: adjustbox.idx
+	-makeindex -s gind.ist -o "$@" "$<"
+
+adjustbox.gls: adjustbox.glo
+	-makeindex -s gglo.ist -o "$@" "$<"
+
+.PHONY: test
+
+test: unpack
+	for T in test*.tex; do echo "$$T"; pdflatex -interaction=batchmode $$T && echo "OK" || echo "Failure"; done
+
+clean:
+	-latexmk -C adjustbox.dtx
+	${RM} ${PACKEDFILES} *.zip *.log *.aux *.toc *.vrb *.nav *.pdf *.snm *.out *.fdb_latexmk *.glo *.gls *.hd *.sta *.stp *.cod
+	${RMDIR} tds
+
+install: unpack doc ${INSTALLDIR} ${DOCINSTALLDIR}
+	${CP} ${PACKEDFILES} ${INSTALLDIR}
+	${CP} ${DOCFILES} ${DOCINSTALLDIR}
+	texhash ${TEXMF}
+
+${INSTALLDIR}:
+	mkdir -p $@
+
+${DOCINSTALLDIR}:
+	mkdir -p $@
+
+ctanify: ${SRCFILES} ${DOCFILES} adjustbox.tds.zip
+	${RM} adjustbox.zip
+	zip adjustbox.zip $^ 
+	unzip -t adjustbox.zip
+	unzip -t adjustbox.tds.zip
+
+zip: adjustbox.zip
+
+tdszip: adjustbox.tds.zip
+
+adjustbox.zip: ${SRCFILES} ${DOCFILES} | pdfopt
+	${RM} $@
+	zip $@ $^ 
+
+adjustbox.tds.zip: ${SRCFILES} ${PACKEDFILES} ${DOCFILES} | pdfopt
+	${RMDIR} tds
+	mkdir -p tds/tex/latex/adjustbox
+	mkdir -p tds/doc/latex/adjustbox
+	mkdir -p tds/source/latex/adjustbox
+	${CP} ${DOCFILES}    tds/doc/latex/adjustbox
+	${CP} ${PACKEDFILES} tds/tex/latex/adjustbox
+	${CP} ${SRCFILES}    tds/source/latex/adjustbox
+	cd tds; zip -r ../$@ .
+
diff --git a/Master/texmf-dist/source/latex/adjustbox/README b/Master/texmf-dist/source/latex/adjustbox/README
new file mode 100644
index 00000000000..a5557713eb6
--- /dev/null
+++ b/Master/texmf-dist/source/latex/adjustbox/README
@@ -0,0 +1,47 @@
+LaTeX package 'adjustbox'
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Copyright (c) 2011 by Martin Scharrer <martin@scharrer-online.de>
+WWW: http://latex.scharrer-online.de/
+
+Provides the macros \trimbox, \clipbox and \adjustbox as an addition
+to the macros \resizebox, \scalebox and \rotatebox from the 'graphics' package.
+It reuses the key=value interface of the 'graphicx' package.
+The 'pgf' package is used to implement the trimming and clipping operations
+as well as to parse the numeric values.
+Environment versions of the macros are also provided.
+Both macros and environments support verbatim content.
+
+Usage:
+\trimbox{<llx> <lly> <urx> <ury>}{<text>}       Trims given amount
+\trimbox*{<llx> <lly> <urx> <ury>}{<text>}      Trims to given viewport
+
+\clipbox{<llx> <lly> <urx> <ury>}{<text>}       Clips given amount
+\clipbox*{<llx> <lly> <urx> <ury>}{<text>}      Clips to given viewport
+
+\adjustbox{<includegraphics options>}{<text>}   Like graphicx's \includegraphics, but for text
+Supported options: width, height, totalheight, keepaspectratio, scale, angle, trim, viewport, clip
+The options is mandatory but can be empty for the trivial case (=\mbox).
+
+
+Environments:
+
+\begin{trimbox}{<llx> <lly> <urx> <ury>}
+   <text>
+\end{trimbox}
+
+\begin{trimbox*}{<llx> <lly> <urx> <ury>}
+   <text>
+\end{trimbox*}
+
+\begin{clipbox}{<llx> <lly> <urx> <ury>}
+   <text>
+\end{clipbox}
+
+\begin{clipbox*}{<llx> <lly> <urx> <ury>}
+   <text>
+\end{clipbox*}
+
+\begin{adjustbox}{<includegraphics options>}
+   <text>
+\end{adjustbox}
+
diff --git a/Master/texmf-dist/source/latex/adjustbox/adjustbox.dtx b/Master/texmf-dist/source/latex/adjustbox/adjustbox.dtx
new file mode 100644
index 00000000000..bf347158177
--- /dev/null
+++ b/Master/texmf-dist/source/latex/adjustbox/adjustbox.dtx
@@ -0,0 +1,484 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2011 by Martin Scharrer <martin@scharrer-online.de>
+% -----------------------------------------------------------------
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%
+%   http://www.latex-project.org/lppl.txt
+%
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2008/05/04 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+%
+% The Current Maintainer of this work is Martin Scharrer.
+%
+% This work consists of the files adjustbox.dtx, adjustbox.ins
+% and the derived file adjustbox.sty.
+%
+% $Id: adjustbox.dtx 2085 2011-01-27 01:29:39Z martin $
+% \fi
+%
+% \iffalse
+%<package>\ProvidesPackage{adjustbox}
+%<*driver>
+\ProvidesFile{adjustbox.dtx}
+%</driver>
+  [2011/01/27 v0.2 Adjusting TeX boxes (trim, clip, ...)]
+%<*driver>
+\documentclass{ydoc}[2011/01/26]
+\GetFileInfo{\jobname.dtx}
+\usepackage{adjustbox}[\filedate]
+\usepackage{array}
+\usepackage{amsmath}
+\usepackage{xcolor}
+\usepackage{booktabs}
+
+%\EnableCrossrefs
+%\CodelineIndex
+%\RecordChanges
+%\OnlyDescription
+\renewcommand{\bottomfraction}{0.5}
+\begin{document}
+  \DocInput{\jobname.dtx}
+  \PrintChanges
+  %\newpage\PrintIndex
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{185}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% \changes{v0.1}{2011/01/24}{First internal version}
+% \changes{v0.2}{2011/01/27}{First released version}
+%
+% \GetFileInfo{\jobname.dtx}
+%
+% \DoNotIndex{\newcommand,\newenvironment,\def,\edef,\xdef,\gdef,\let}
+%
+% \ifpdf
+% \hypersetup{%
+%   pdfauthor   = {Martin Scharrer <martin@scharrer-online.de>},
+%   pdftitle    = {The adjustbox package},
+%   pdfsubject  = {Documentation of LaTeX package adjustbox},
+%   pdfkeywords = {adjustbox, LaTeX, TeX}
+% }%
+% \fi
+% \clearpage
+% \null
+% \vspace*{-2em}
+% \begin{center}
+%   {\huge The \textsf{adjustbox} Package\\[\medskipamount]}
+%   {\large Martin Scharrer \\[\medskipamount]\normalsize
+%   \url{martin@scharrer-online.de}\\[.8ex]
+%   \url{http://www.ctan.org/pkg/adjustbox/}\\[\bigskipamount]}
+%   {\large Version \fileversion\ -- \filedate}\\
+% \end{center}
+% \vspace{1.2em}%
+% \def\optstar{\textcolor{optional}{*}}
+%
+% \makeatletter
+% \def\LATeX{(L\kern -.36em{\sbox \z@ T\vbox to\ht \z@ {\hbox {\check@mathfonts
+%  \fontsize \sf@size \z@ \math@fontsfalse \selectfont A}\vss }}\kern -.15em)\TeX}
+% \makeatother
+%
+% \begin{abstract}
+%  This package provides macros missing in \pkg{graphics/x} to trim, clip and generally adjust boxed \LaTeX{} material.
+%  The macros allow for verbatim content. Equivalent environments are also provided. The trim and clip operation
+%  are implemented using the \pkg{pgf} package, which supports both DVI/PS and PDF output.
+%  \\
+%  \textcolor{red}{This package is new and the implementation might change in upcoming releases!}
+% \end{abstract}
+%
+% \section{Introduction}
+% The standard \LaTeX{} package \pkg{graphicx} (the extended version of \pkg{graphics}) provides the macro \Macro\includegraphics[<options>]{<file name>} which can
+% be used to include graphic files. Several options can be used to scale, resize, rotate, trim and/or clip the graphic.
+% The macros \Macro\scalebox, \Macro\resizebox and \Macro\rotatebox are also provided to apply the corresponding 
+% operation on \LATeX{} material, which is subsequently placed inside a \Macro\hbox.
+% However no macros are provided to trim or clip \LATeX{} material, most likely because this operations
+% are not done by \TeX{} but by the output format, i.e. using PostScript (PS) or PDF operations.
+% 
+% This package provides the missing macros \Macro\clipbox and \Macro\trimbox
+% as well as the general \Macro\adjustbox macro. The clipping and trimming operations are implemented using
+% a \env{pgfpicture} environment from the \pkg{pgf} package which supports both PS and PDF output.
+%
+%
+% \section{Usage}
+% This section describes the usage of the provided macros, which are outlined in section~\ref{sec:boxmacros}.
+% Possible advanced values for the macro arguments are mentioned in section~\ref{sec:argval}. The existing verbatim support
+% is explained in section~\ref{sec:verbatim}. Finally section~\ref{sec:alternatives} compares the existing macros with the 
+% corresponding options of \Macro\adjustbox.
+% It is recommended to also read the \emph{Graphics Guide} (|grfguide|, i.e.~the manual of the |graphics|/|x| packages),
+% to understand the existing options for \Macro\includegraphics. See the example section for examples of this macros.
+%
+% \subsection{Box Modification Macros}\label{sec:boxmacros}
+%
+% \subsubsection*{Trim Box Content}
+%
+% \vskip-\lastskip
+% \DescribeMacro\trimbox*{<llx>~<lly>~<urx>~<ury>}{<text>}
+% The macro \Macro\trimbox trims the given amount from the lower left (ll) and the upper right (ur) corner of
+% the box. This means that the amount \meta{llx} is trimmed from the left side, \meta{lly} from the bottom and
+% \meta{urx} and \meta{ury} from the right and top of the box, respectively.
+% Trimming means that the official size of the box is reduced, but no material
+% is actual removed. The material in the trimmed areas simply swaps over the official border.
+%
+% If the starred version is used the four coordinates are taken as the |viewport| instead, i.e. the box
+% is trimmed to the rectangle described by the coordinates.
+%
+%
+%
+% \DescribeEnv[<text>]{trimbox}*{<llx>~<lly>~<urx>~<ury>}
+% \vspace{-\baselineskip}
+% \DescribeEnv[<text>]{trimbox*}{<llx>~<lly>~<urx>~<ury>}
+% The \env{trimbox} and \env{trimbox*} environments do the same as the corresponding macros.
+% Special care is taken so that the macros and the environments can have the same name.
+% Because of this the star can be either part of the name or an optional argument.
+% Also the plain\TeX{} syntax for environments (|\trimbox ... \endtrimbox|) can not be used
+% because it will trigger \Macro\trimbox in macro mode. 
+%
+%
+% \subsubsection*{Clip Box Content}
+% \vskip-\lastskip
+% \DescribeMacro\clipbox*{<llx>~<lly>~<urx>~<ury>}{<text>}
+% The \Macro\clipbox macro works like the \Macro\trimbox and trims the given amounts from the \meta{text}.
+% However, in addition the trimmed material is also clipped, i.e. it is not shown in the final document.
+% Note that the material will still be part of the output file but is simply not shown.
+% It might be exported using special tools, so using \Macro\clipbox\relax (or \Macro\includegraphics[clip,trim=...])
+% to censor classified information would be a bad idea.
+% The starred version will again use the given coordinates as |viewport|.
+%
+% \DescribeEnv[<text>]{clipbox}*{<llx>~<lly>~<urx>~<ury>}
+% \vspace{-\baselineskip}
+% \DescribeEnv[<text>]{clipbox*}{<llx>~<lly>~<urx>~<ury>}
+% The environment versions of \Macro\clipbox and \Macro\clipbox*.
+%
+%
+% \subsubsection*{Adjust Box Content}
+% \vskip-\lastskip
+% \DescribeMacro\adjustbox{<includegraphics options>}{<text>}
+% The \Macro\adjustbox macro is the general form of all box modifying macros mentioned in the introduction.
+% It can be thought as an \Macro\includegraphics for \LATeX{} material.
+% It supports the same set of \meta{options}, however they are provided as a mandatory not as an optional argument.
+% An \Macro\adjustbox without options would not make sense and can be replaced by a simple \Macro\mbox.
+% There is no starred version of this macro. See also Table~\ref{tab:alternatives} for a comparison of \Macro\adjustbox
+% with the other macros.
+%
+% \DescribeEnv[<text>]{adjustbox}{<includegraphics options>}
+% The environment version of \Macro\adjustbox.
+%
+%
+% \subsection{Argument Values}\label{sec:argval}
+%
+% The\marginpar{Parsing} argument values are parsed by versatile \Macro\pgfmathparse of the already used |pgf| package. See the |pgfmanual| for detailed information.
+% This allows very complex arithmetic expressions as any of the trim/clip coordinates or other numeric options.
+% Note\marginpar{Space=Separator} that the four values for \Macro\trimbox and \Macro\clipbox as well as for the |trim| and |viewport| option of \Macro\adjustbox
+% are separated by spaces. If the expression of any of this values holds a space or ends with a macro (eats trailing spaces!) it must be wrapped into braces `|{ }|'.
+%
+% \DescribeMacros
+%    \hbox{\Macro\width~~~\Macro\height~~~\Macro\depth~~~\Macro\totalheight}%
+% \endDescribeMacros
+% This \LaTeX{} lengths hold the original dimension of \meta{text} and can be used as part of the arguments to \Macro\adjustbox, \Macro\trimbox and \Macro\clipbox.
+% The totalheight is the height plus depth.
+%
+% If\marginpar{Default unit} no unit is provided for of the bounding box coordinates (llx, lly, urx, ury) then PostScript points
+% (\emph{big points}, bp, $72\,\text{bp}=1\,\text{inch}$) are used, as it is the default behaviour
+% of the |trim| and |viewport| ptions of \pkg{graphicx}'s \Macro\includegraphics. Note that \pkg{graphicx} converts all values, independent if a unit is provided or not,
+% internally to bp, because graphics where traditionally stored in Encapsulated PostScript (EPS) files. The more modern PDF files also use bp instead of pt.
+% Because the |adjustbox| package macros target \LATeX{} material and users will mostly use pt values this internal conversion to bp got disabled for them to 
+% avoid unnecessary rounding errors.
+%
+%
+% \subsubsection*{Examples for Argument Values}
+% \hbox to \linewidth{\hss\Macro\trimbox{'{.5\width} 10 {log10(10)/sin(45) + 1} 10pt'}{<content>}\hss}
+% will trim half the original amount from the left, 10\,bp from the bottom and 
+% 2.42328\,bp from the right (bp, because no unit was used in the formula; change e.g. `|+ 1|' to `|+ 1pt|' to get 2.42328\,pt),
+% as well as 10\,pt from the top.
+%
+% \subsection{Verbatim Support}\label{sec:verbatim}
+% The macros read the \meta{text} as \TeX{} \Macro\hbox and not as an macro argument in order to support verbatim content.
+% This means that the braces around the content can also be written as \Macro\bgroup and \Macro\egroup:\\[\smallskipamount]
+% \hspace*{2\parindent}\Macro\trimbox{1 2 3 4}\AlsoMacro\bgroup~<content>\AlsoMacro\egroup\\[\smallskipamount]
+% Special care is taken to allow the \meta{text} to be a single macro (except \Macro\bgroup) without any braces:\\[\smallskipamount]
+% \hspace*{2\parindent}\Macro\clipbox{1 2 3 4}\AlsoMacro\somemacro\\[\smallskipamount]
+% This is to support the questionable habit of some \LaTeX{} users to drop the braces for single token arguments.
+% All environments support verbatim content.
+%
+% \subsection{Alternatives for existing Macros}\label{sec:alternatives}
+% The flexible \Macro\adjustbox can also be used as an alternative to existing macros from the \pkg{graphics} package as shown by Table~\ref{tab:alternatives}.
+% Because it is longer then the originals this is only of benefit if combinations are to be replaced or verbatim text must be supported.
+%
+% \begin{table}[b]
+% \belowcaptionskip\abovecaptionskip
+% \colorlet{optional}{black}
+% \caption{Alternatives for existing Macros}\label{tab:alternatives}
+% \hbox to \linewidth{\hss
+% \begin{tabular}{ll}
+%   \toprule
+%   Original Macro (w/o text argument)  &  Alternative  (w/o text argument) \\
+%   \midrule
+%   \Macro\rotatebox{<angle>}    &   \Macro\adjustbox{'angle='<angle>}  \\
+%   \Macro\scalebox{<factor>}    &   \Macro\adjustbox{'scale='<factor>}  \\
+%   \Macro\scalebox{<x-factor>}[<y-factor>]    &   \Macro\adjustbox{'width='<x-factor>\AlsoMacro\width',height='<y-factor>\AlsoMacro\height}  \\
+%   \Macro\reflectbox            &   \Macro\adjustbox{'width=-'\AlsoMacro\width',height='\AlsoMacro\height}  \\
+%   \Macro\resizebox{<width>}{<height>}    &   \Macro\adjustbox{'width='<width>',height='<height>}  \\
+%   \Macro\resizebox*{<width>}{<totalheight>}    &   \Macro\adjustbox{'width='<width>',totalheight='<totalheight>}  \\
+%   \Macro\trimbox{<llx>~<lly>~<urx>~<ury>}    &   \Macro\adjustbox{'trim='<llx>~<lly>~<urx>~<ury>}  \\
+%   \Macro\trimbox*{<llx>~<lly>~<urx>~<ury>}    &   \Macro\adjustbox{'viewport='<llx>~<lly>~<urx>~<ury>}  \\
+%   \Macro\clipbox{<llx>~<lly>~<urx>~<ury>}    &   \Macro\adjustbox{'trim='<llx>~<lly>~<urx>~<ury>,clip}  \\
+%   \Macro\clipbox*{<llx>~<lly>~<urx>~<ury>}    &   \Macro\adjustbox{'viewport='<llx>~<lly>~<urx>~<ury>,clip}  \\
+%   \bottomrule
+% \end{tabular}%
+% \hss}%
+% \end{table}
+%
+% \clearpage
+% \section{Examples}
+%
+% \def\examplecontent{\begin{tabular}{@{}|c|c|@{}}
+%       \hline
+%       A & B \\
+%       \hline
+%       C & D \\
+%       \hline
+%   \end{tabular}}
+% The following examples show the application of the package macros on an example text.
+% The result is placed in a tight, colored frame box to show the resulting dimensions.
+% \begingroup
+% \fboxsep=0pt%
+% \def\Fbox{\fcolorbox{red}{white}}%
+% \def\X{\vspace*{20pt}}%
+% \par\bigskip\noindent
+% \begin{tabular}{@{}lc}
+%   \X\Macro\example      & \Fbox{\examplecontent} \\
+%   \X\Macro\trimbox{10 5 10 5}{\AlsoMacro\example} & \Fbox{\trimbox{10 5 10 5}{\examplecontent}} \\
+%   \X\Macro\clipbox{10 5 10 5}{\AlsoMacro\example} & \Fbox{\clipbox{10 5 10 5}{\examplecontent}} \\
+%   \X\Macro\trimbox*{15 5 25 30}{\AlsoMacro\example} & \Fbox{\trimbox*{15 5 25 30}{\examplecontent}} \\
+%   \X\Macro\clipbox*{15 5 25 30}{\AlsoMacro\example} & \Fbox{\clipbox*{15 5 25 30}{\examplecontent}} \\
+%   \X\Macro\adjustbox{trim=10 5 10 5,angle=45}{\AlsoMacro\example} & \Fbox{\adjustbox{trim=10 5 10 5,angle=45}{\examplecontent}} \\
+%   \X\Macro\adjustbox{scale=1.5}{\AlsoMacro\example} & \Fbox{\adjustbox{scale=1.5}{\examplecontent}} \\
+%   \X\Macro\adjustbox{width=180pt,height=20pt}{\AlsoMacro\example} & \Fbox{\adjustbox{width=40pt,height=10pt}{\examplecontent}} \\
+%   \X\Macro\adjustbox{width=180pt,height=20pt,keepaspectratio}{\AlsoMacro\example} & \Fbox{\adjustbox{width=40pt,height=10pt,keepaspectratio}{\examplecontent}} \\
+% \end{tabular}
+%
+% \subsubsection*{Environment example:}
+% \noindent
+% \Macro\begin{adjustbox}{angle=2}:\\
+% \begin{adjustbox}{angle=2}
+%    | verbatim inside \begin{adjustbox}{angle=2} ... \end{adjustbox} |
+% \end{adjustbox}
+% \endgroup
+%
+% \StopEventually{}
+% \clearpage
+% \iffalse
+%<*package>
+% \fi
+% \section{Implementation}
+%
+%    \begin{macrocode}
+\RequirePackage{graphicx}[1999/02/16]
+\RequirePackage{pgf}
+%    \end{macrocode}
+%
+% \begin{environment}{clipbox}
+% \begin{macro}{\clipbox}
+%    \begin{macrocode}
+\newcommand\clipbox{%
+    \begingroup
+    \def\adjustbox@name{clipbox}%
+    \@ifstar
+        {\adjustbox@{clip,viewport=}}%
+        {\adjustbox@{clip,trim=}}%
+}
+%    \end{macrocode}
+% \end{macro}
+%    \begin{macrocode}
+\def\endclipbox{%
+    \endadjustbox
+}
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{environment}{clipbox*}
+%    \begin{macrocode}
+\newenvironment{clipbox*}
+    {\begin{clipbox}*}
+    {\end{clipbox}}
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{environment}{trimbox}
+% \begin{macro}{\trimbox}
+%    \begin{macrocode}
+\newcommand\trimbox{%
+    \begingroup
+    \def\adjustbox@name{trimbox}%
+    \@ifstar
+        {\adjustbox@{viewport=}}%
+        {\adjustbox@{trim=}}%
+}
+%    \end{macrocode}
+% \end{macro}
+%    \begin{macrocode}
+\def\endtrimbox{%
+    \endadjustbox
+}
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{environment}{trimbox*}
+%    \begin{macrocode}
+\newenvironment{trimbox*}
+    {\begin{trimbox}*}
+    {\end{trimbox}}
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{environment}{adjustbox}
+% \begin{macro}{\adjustbox}
+%    \begin{macrocode}
+\newcommand\adjustbox{%
+    \begingroup
+    \tracinggroups=1%
+    \def\adjustbox@name{adjustbox}%
+    \adjustbox@{}%
+}
+%    \end{macrocode}
+% \end{macro}
+%    \begin{macrocode}
+\def\endadjustbox{%
+    \unskip
+    \egroup
+    \color@endgroup
+    \egroup
+    \adjustbox@@
+}
+%    \end{macrocode}
+% \end{environment}
+%
+%
+% \begin{macro}{\adjustbox@}
+%    \begin{macrocode}
+\def\adjustbox@#1#2{%
+    \def\adjustbox@setkeys{\setkeys{Gin}{#1#2}}%
+    \ifx\@currenvir\adjustbox@name
+        \expandafter\def\expandafter\@currenvir\expandafter{\@currenvir\empty}%
+        \def\next{%
+            \setbox\@tempboxa\hbox\bgroup
+                \color@setgroup\bgroup
+                \ignorespaces
+        }%
+    \else
+        \def\next{%
+            \setbox\@tempboxa\hbox\bgroup%0
+                \color@setgroup\bgroup%
+                \aftergroup\color@endgroup
+                \aftergroup\egroup%
+                \aftergroup\adjustbox@@
+                \@ifnextchar\bgroup
+                    {\let\@let@token=}%
+                    {\adjust@box}%
+        }%
+    \fi
+    \next
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\adjust@box}
+%    \begin{macrocode}
+\def\adjust@box#1{%
+    #1\egroup
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\adjustbox@@}
+%    \begin{macrocode}
+\def\adjustbox@@{%
+%    \end{macrocode}
+% Set the box dimension macros.
+%    \begin{macrocode}
+    \def\width{\wd\@tempboxa}%
+    \def\height{\ht\@tempboxa}%
+    \def\depth{\dp\@tempboxa}%
+    \@tempdimc=\ht\@tempboxa
+    \advance\@tempdimc by \dp\@tempboxa\relax
+    \def\totalheight{\@tempdimc}%
+%    \end{macrocode}
+% Locally redefine \Macro\Gin@defaultbp to use \Macro\pgfmathsetmacro
+% with |bp| as the default unit.
+% This should yield the same results (apart of smaller rounding errors) if values
+% are given without unit but avoids the internal conversion to |bp| of values with
+% units.
+%    \begin{macrocode}
+    \def\pgfmathresultunitscale{1bp}%
+    \let\pgfmathpostparse\pgfmathscaleresult
+    \let\Gin@defaultbp\pgfmathsetmacro
+    \let\setlength\pgfmathsetlength
+%    \end{macrocode}
+% The rest of the code was adapted from the \Macro\Gin@ii macro from the |graphicx| package.
+% The \emph{temp switch a} is set to |true| to indicate to |graphicx| that the
+% scaling should be done internal, so this package doesn't have to do it.
+% The content including macro \Macro\adjustbox@@@ is but into place,
+% the saved options are activated and the final size is set.
+% The typesetting of the content is finally done by executing the token register.
+%    \begin{macrocode}
+    \@tempswatrue
+    \toks@{{\adjustbox@@@}}%
+    \adjustbox@setkeys
+    \Gin@esetsize
+    \the\toks@
+    \endgroup
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\adjustbox@@@}
+%    \begin{macrocode}
+\def\adjustbox@@@{%
+    \def\Gin@llx{0}%
+    \Gin@defaultbp\Gin@lly{+-\dp\@tempboxa}%
+    \Gin@defaultbp\Gin@urx{+\wd\@tempboxa}%
+    \Gin@defaultbp\Gin@ury{+\ht\@tempboxa}%
+    \Gin@viewport@code
+    \begin{pgfpicture}%
+        \pgfpathmoveto{\pgfqpoint{\Gin@llx pt}{\Gin@lly pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@urx pt}{\Gin@lly pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@urx pt}{\Gin@ury pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@llx pt}{\Gin@ury pt}}%
+        \pgfpathclose
+        \expandafter\pgfusepath\ifGin@clip{clip}\else{use as bounding box}\fi\relax
+        \pgfset{inner sep=\z@,outer sep=\z@}%
+        \pgfnode{rectangle}{base west}{\box\@tempboxa}{}{}%
+    \end{pgfpicture}%
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \Finale
+% \iffalse
+%</package>
+% \fi
diff --git a/Master/texmf-dist/source/latex/adjustbox/adjustbox.ins b/Master/texmf-dist/source/latex/adjustbox/adjustbox.ins
new file mode 100644
index 00000000000..c0dd5b90750
--- /dev/null
+++ b/Master/texmf-dist/source/latex/adjustbox/adjustbox.ins
@@ -0,0 +1,49 @@
+%% $Id: adjustbox.ins 2062 2011-01-25 02:03:20Z martin $
+\input docstrip.tex
+\preamble
+
+Copyright (C) 2011 by Martin Scharrer <martin@scharrer-online.de>
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3c
+of this license or (at your option) any later version.
+The latest version of this license is in
+
+   http://www.latex-project.org/lppl.txt
+
+and version 1.3c or later is part of all distributions of LaTeX
+version 2008/05/04 or later.
+
+This work has the LPPL maintenance status `maintained'.
+
+The Current Maintainer of this work is Martin Scharrer.
+
+This work consists of the files adjustbox.dtx, adjustbox.ins
+and the derived file adjustbox.sty.
+
+\endpreamble
+\keepsilent
+
+\generate{%
+  \file{adjustbox.sty}{\from{adjustbox.dtx}{package}}%
+}
+
+\obeyspaces
+\Msg{*************************************************************}
+\Msg{*                                                           *}
+\Msg{* To finish the installation you have to move the following *}
+\Msg{* file into a directory searched by TeX:                    *}
+\Msg{*                                                           *}
+\Msg{*     adjustbox.sty                                         *}
+\Msg{*                                                           *}
+\Msg{* To produce the documentation run the file adjustbox.dtx   *}
+\Msg{* through LaTeX.                                            *}
+\Msg{*                                                           *}
+\Msg{* Happy TeXing!                                             *}
+\Msg{*                                                           *}
+\Msg{*************************************************************}
+
+\endbatchfile
+
+%% vim: ft=tex
+
diff --git a/Master/texmf-dist/tex/latex/adjustbox/adjustbox.sty b/Master/texmf-dist/tex/latex/adjustbox/adjustbox.sty
new file mode 100644
index 00000000000..247bd6368d0
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/adjustbox/adjustbox.sty
@@ -0,0 +1,134 @@
+%%
+%% This is file `adjustbox.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% adjustbox.dtx  (with options: `package')
+%% 
+%% Copyright (C) 2011 by Martin Scharrer <martin@scharrer-online.de>
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3c
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% 
+%%    http://www.latex-project.org/lppl.txt
+%% 
+%% and version 1.3c or later is part of all distributions of LaTeX
+%% version 2008/05/04 or later.
+%% 
+%% This work has the LPPL maintenance status `maintained'.
+%% 
+%% The Current Maintainer of this work is Martin Scharrer.
+%% 
+%% This work consists of the files adjustbox.dtx, adjustbox.ins
+%% and the derived file adjustbox.sty.
+%% 
+\ProvidesPackage{adjustbox}
+  [2011/01/27 v0.2 Adjusting TeX boxes (trim, clip, ...)]
+\RequirePackage{graphicx}[1999/02/16]
+\RequirePackage{pgf}
+\newcommand\clipbox{%
+    \begingroup
+    \def\adjustbox@name{clipbox}%
+    \@ifstar
+        {\adjustbox@{clip,viewport=}}%
+        {\adjustbox@{clip,trim=}}%
+}
+\def\endclipbox{%
+    \endadjustbox
+}
+\newenvironment{clipbox*}
+    {\begin{clipbox}*}
+    {\end{clipbox}}
+\newcommand\trimbox{%
+    \begingroup
+    \def\adjustbox@name{trimbox}%
+    \@ifstar
+        {\adjustbox@{viewport=}}%
+        {\adjustbox@{trim=}}%
+}
+\def\endtrimbox{%
+    \endadjustbox
+}
+\newenvironment{trimbox*}
+    {\begin{trimbox}*}
+    {\end{trimbox}}
+\newcommand\adjustbox{%
+    \begingroup
+    \tracinggroups=1%
+    \def\adjustbox@name{adjustbox}%
+    \adjustbox@{}%
+}
+\def\endadjustbox{%
+    \unskip
+    \egroup
+    \color@endgroup
+    \egroup
+    \adjustbox@@
+}
+\def\adjustbox@#1#2{%
+    \def\adjustbox@setkeys{\setkeys{Gin}{#1#2}}%
+    \ifx\@currenvir\adjustbox@name
+        \expandafter\def\expandafter\@currenvir\expandafter{\@currenvir\empty}%
+        \def\next{%
+            \setbox\@tempboxa\hbox\bgroup
+                \color@setgroup\bgroup
+                \ignorespaces
+        }%
+    \else
+        \def\next{%
+            \setbox\@tempboxa\hbox\bgroup%0
+                \color@setgroup\bgroup%
+                \aftergroup\color@endgroup
+                \aftergroup\egroup%
+                \aftergroup\adjustbox@@
+                \@ifnextchar\bgroup
+                    {\let\@let@token=}%
+                    {\adjust@box}%
+        }%
+    \fi
+    \next
+}
+\def\adjust@box#1{%
+    #1\egroup
+}
+\def\adjustbox@@{%
+    \def\width{\wd\@tempboxa}%
+    \def\height{\ht\@tempboxa}%
+    \def\depth{\dp\@tempboxa}%
+    \@tempdimc=\ht\@tempboxa
+    \advance\@tempdimc by \dp\@tempboxa\relax
+    \def\totalheight{\@tempdimc}%
+    \def\pgfmathresultunitscale{1bp}%
+    \let\pgfmathpostparse\pgfmathscaleresult
+    \let\Gin@defaultbp\pgfmathsetmacro
+    \let\setlength\pgfmathsetlength
+    \@tempswatrue
+    \toks@{{\adjustbox@@@}}%
+    \adjustbox@setkeys
+    \Gin@esetsize
+    \the\toks@
+    \endgroup
+}
+\def\adjustbox@@@{%
+    \def\Gin@llx{0}%
+    \Gin@defaultbp\Gin@lly{+-\dp\@tempboxa}%
+    \Gin@defaultbp\Gin@urx{+\wd\@tempboxa}%
+    \Gin@defaultbp\Gin@ury{+\ht\@tempboxa}%
+    \Gin@viewport@code
+    \begin{pgfpicture}%
+        \pgfpathmoveto{\pgfqpoint{\Gin@llx pt}{\Gin@lly pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@urx pt}{\Gin@lly pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@urx pt}{\Gin@ury pt}}%
+        \pgfpathlineto{\pgfqpoint{\Gin@llx pt}{\Gin@ury pt}}%
+        \pgfpathclose
+        \expandafter\pgfusepath\ifGin@clip{clip}\else{use as bounding box}\fi\relax
+        \pgfset{inner sep=\z@,outer sep=\z@}%
+        \pgfnode{rectangle}{base west}{\box\@tempboxa}{}{}%
+    \end{pgfpicture}%
+}
+\endinput
+%%
+%% End of file `adjustbox.sty'.