new font fge (10jul07)

git-svn-id: svn://tug.org/texlive/trunk@4608 c570f23f-e606-0410-a88d-b1316a301751

14 files changed, 2471 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/fonts/fge/README b/Master/texmf-dist/doc/fonts/fge/README
new file mode 100644
index 00000000000..77061e31a3e
--- /dev/null
+++ b/Master/texmf-dist/doc/fonts/fge/README
@@ -0,0 +1,20 @@
+This is the fge font, a font of special symbols for setting Frege's 
+Grundgesetze der Arithmetik and the secondary literature.
+
+See the file fge-doc.pdf for information on how to access to these 
+fonts from LaTeX.
+
+This package contains several characters derived largely from
+the Computer Modern fonts, (c) D.E. Knuth. The spritus lenis
+accent is a simplified version of that in the Ibycus font 
+(c) Pierre A. MacKay. The remainder of this work is Copyright 
+(c) J.J.Green 2007 and subject to the LaTeX Project Public License. 
+See 
+
+  http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html
+
+Further information on the font can be found at
+
+  http://pdfb.wiredworkplace.net/pub/jjg/code/fge.html
+
+J.J. Green 2007
diff --git a/Master/texmf-dist/doc/fonts/fge/fge-doc.pdf b/Master/texmf-dist/doc/fonts/fge/fge-doc.pdf
new file mode 100644
index 00000000000..aaaeb725b15
--- /dev/null
+++ b/Master/texmf-dist/doc/fonts/fge/fge-doc.pdf
diff --git a/Master/texmf-dist/fonts/source/public/fge/fgebase.mf b/Master/texmf-dist/fonts/source/public/fge/fgebase.mf
new file mode 100644
index 00000000000..3b990c9ca67
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/fge/fgebase.mf
@@ -0,0 +1,101 @@
+% fgebase.mf : Supplemental defintions for fge
+% J.J. Green 2005-2006
+% $Id: fgebase.mf,v 1.7 2007/01/24 00:03:04 jjg Exp $
+
+fgebase := 1;
+
+% vertical versions of knuth's bulb, not sure why need quite
+% so many of these
+
+def vbulb(suffix $,$$,$$$) =
+  
+  z$$$r = z$$r;
+  path_.l := z$l{0,y$$r-y$r}...{x$$r-x$r,0}z$$l;
+  filldraw path_.l--z$$r{y$r-y$$r,0}...{0,x$r-x$$r}z$r--cycle; % link
+  path_.r := z$$$l{x$r-x$$r,0}..z$$$r{x$$r-x$r,0}; % near-circle
+  filldraw path_.r--z$$l{x$$r-x$r,0}..cycle; % bulb
+
+enddef;
+
+def dlbulb(suffix $,$$,$$$) =
+  
+  z$$$r = z$$r;
+  path_.l := z$l{0,y$$r-y$r}...{x$$r-x$r,0}z$$l;
+  filldraw path_.l--z$$r{y$$r-y$r,0}...{0,x$$r-x$r}z$r--cycle; % link
+  path_.r := z$$$l{x$$r-x$r,0}..z$$$r{x$r-x$$r,0}; % near-circle
+  filldraw path_.r--z$$l{x$r-x$$r,0}..cycle; % bulb
+
+enddef;
+
+def drbulb(suffix $,$$,$$$) =
+  
+  z$$$r = z$$r;
+  path_.l := z$l{0,y$$r-y$r}...{-x$r+x$$r,0}z$$l;
+  filldraw path_.l--z$$r{y$r-y$$r,0}...{0,x$r-x$$r}z$r--cycle; % link
+  path_.r := z$$$l{x$$r-x$r,0}..z$$$r{x$r-x$$r,0}; % near-circle
+  filldraw path_.r--z$$l{x$r-x$$r,0}..cycle; % bulb
+
+enddef;
+
+% vertical arm
+
+vardef varm(suffix $,$$,@)(expr darkness,jut) =  % arm from |z$| to |z$$|
+  
+  y@0=good.y(y$$r-jut);
+  x@0=x$r;
+  if serifs: x@1=x$l; z@1=z$$l+whatever*(z$$r-z@0);
+    z@2=.5[z$l,z@1];
+    path p_; p_= z$$l{z@1-z$$l}...darkness[z@1,.5[z@2,z$$l] ]...z@2
+    ---z$l--z$r--z@0--z$$r--cycle;
+    if (x$$>x$) <> (xpart precontrol 1 of p_ > xpart postcontrol 1 of p_):
+      p_:=z$$l{z@1-z$$l}...darkness[z@1,.5[z@2,z$$l] ]
+      ---z$l--z$r--z@0--z$$r--cycle;
+    fi
+    filldraw p_; % arm and beak
+  else:
+    filldraw z$l--z$r--z@0--z$$r--cycle;
+  fi  % sans-serif arm
+  penlabels(@0,@1,@2);
+
+enddef;
+
+% horizontal serifs for rotated characters: here interchange x & y,
+% so top is right, left is bot and so on
+
+vardef hserif(suffix $,$$,@)  % serif at |z$| for stroke from |z$$|
+  (expr darkness,jut) suffix modifier =
+  pickup crisp.nib; numeric bracket_height; pair downward;
+  bracket_height=if dark.modifier: 1.5 fi\\ bracket;
+  if x$<x$$:
+    x@2=min(x$+bracket_height,x$$);
+    rt x@1-slab = lft x@0+eps = tiny.lft x$;
+    downward = z$-z$$;
+    if x@1>x@2: x@2:=x@1; fi
+  else:
+    x@2 = max(x$-bracket_height,x$$);
+    lft x@1+slab = rt x@0-eps = tiny.rt x$;
+    downward = z$$-z$;
+    if x@1<x@2: x@2:=x@1; fi
+  fi
+  x@3 = x@2;
+  z@3 = whatever[z$,z$$];
+  if jut<0:
+    z@2-penoffset downward of currentpen =
+    z$r-penoffset downward of pen_[tiny.nib]+whatever*downward;
+    bot y@0 = bot y@1 = tiny.bot y$r + jut;
+    if y@3<y@2+eps: y@3:=y@2+eps; fi
+  else:
+    z@2+penoffset downward of currentpen =
+    z$l+penoffset downward of pen_[tiny.nib]+whatever*downward;
+    top y@0 = top y@1 = tiny.top y$l + jut;
+    if y@3>y@2-eps: y@3:=y@2-eps; fi
+  fi
+  pair corner;
+  xpart corner=x@1;
+  corner = z@2+whatever*downward;
+  filldraw
+  z@2{z$-z$$}...darkness[corner,0.5[z@1,z@2]]{z@1-z@2}
+  ...{0,jut}z@1--z@0--(x@0,y$)--z@3--cycle; % the serif
+  labels (@1,@2);
+enddef;
+
diff --git a/Master/texmf-dist/fonts/source/public/fge/fgeit.mf b/Master/texmf-dist/fonts/source/public/fge/fgeit.mf
new file mode 100644
index 00000000000..d06e2f83fcd
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/fge/fgeit.mf
@@ -0,0 +1,284 @@
+% fgeit.mf : fge italic characters
+% J.J. Green 2006
+% $Id: fgeit.mf,v 1.15 2007/04/04 21:47:15 jjg Exp $
+
+mode_setup;
+font_setup;
+
+proofing := 2;
+
+slantfont slantfge;
+
+% This is an inverted f, but an italic f with a straight
+% descending stem rather than the more usual tail.
+% As with the inverted d (below) a hook is attached to
+% the left.   
+
+cmchar "inverted f with hook";
+beginchar("f",7.5u#,asc_height#,desc_depth#); 
+  italcorr h#*slant + 0.5stem# - 2.5u#;
+  adjust_fit(serif_fit# + 2stem_shift#,serif_fit# - 2stem_shift#);
+
+  pickup tiny.nib;
+
+  % stem
+  
+  pos1(stem',0); pos2(stem',0);
+
+  rt.x1r = hround(w/2 + 5u/4 + stem'/2);
+  x1 = x2;
+  top y1 = h;
+  bot y2 = -1/3d;
+
+  filldraw stroke z1e--z2e;
+
+  % bar
+  
+  pos3(bar,90);
+  pos4(bar,90);
+  bot y3l = bot y4l = 0;
+
+  rt x4 = hround(w - 1/3u);
+  x2 - x3 = x4 - x2;
+  
+  filldraw stroke z3e--z4e;
+  
+  % arc and bulb
+
+  pos5(vair',-90);
+  pos6(hair,-180);
+  pos7(flare,-180);
+
+  x5 = 1/2[x2,x6r];
+  bot y5r = -d-oo;
+  y6 = 1/2flair = -0.88d;
+  z6r = z7r;
+  rt x7l = floor 11/4u;
+
+  (x,y5r) = whatever[z5l,z2l];
+  x5r := max(x,1/2[x6r,x5]);
+  
+  filldraw stroke z2e{down}...z5e{left};
+  bulb(5,6,7);
+
+  % hook
+
+  pos8(0.5[hair,curve],0);
+  rt x8r = lft x1l;
+  y8 = 0.5x_height;
+
+  pos9(curve,90);
+  top y9r = x_height + oo;
+  x9 = 0.4[0,x8l];
+
+  pos10(hair,180);
+  pos11(hair,-90);
+
+  z9 - z10 = 2.0u*dir(45);
+  z8 - z11 = 2.0u*dir(55);
+  
+  filldraw stroke z11e{right}...z8e{up}...{left}z9e...{down}z10e;
+  
+  penlabels(1,2,3,4,5,6,7,8,9,10,11);
+
+endchar;
+
+% I'm convinced this is a rotated d, which would explain the
+% right serif on the stem. I take the code from itall.mf's p
+% but replace the flat serif with the slanted serif of the d.
+% This looks a little different to the original, but then the
+% d's of the original *do* have a flat serif -- so this is
+% needed for consistency with computer modern's d. 
+
+cmchar "inverted d with hook";
+beginchar("p",13u#,asc_height#,desc_depth#);
+  italcorr 0.7x_height#*slant - u# + 0.5curve#;
+  adjust_fit(0,0);
+  
+  numeric hook_jut;
+  hook_jut = w - 9u;
+  
+  pickup fine.nib;
+  x0 = hook_jut;
+  x2 - 0.5stem - hook_jut = hround(2.5u-.5stem);
+  hook_in(0,1,2);  % opening hook
+
+  pos4(hair,-180);
+  pos5(vair,-90);
+  pos6(curve,0);
+  pos7(vair,90);
+  x4=x2;
+  rt x6r=hround(w-1.5u+.5curve);
+  x5=x7=.5[x4,x6];
+  bot y5r=-oo;
+  top y7r=x_height+oo;
+  y4=y6=.5[y5,y7];
+
+  filldraw stroke super_arc.e(4,5) & pulled_arc.e(5,6)
+  & pulled_arc.e(6,7) & super_arc.e(7,4);  % bowl
+
+  pickup tiny.nib;
+  pos2'(stem,0);
+  pos3(stem,0);
+  z2=z2';
+  x3=x2;
+  bot y3=-d;
+
+  filldraw stroke z2'e--z3e;  % stem
+  sloped_serif.r(3,2',a,1/3,jut,serif_drop);  % serif
+
+  math_fit(-min(2/3x_height#*slant-.5hair#-.5u#,
+      2u#-.5stem#-desc_depth#*slant),ic#);
+
+  % bit ad-hoc this
+  
+  pos8(hair,0);
+  z8r=z0l;
+
+  pos9(curve,90);
+  pos10(hair,180);
+  
+  x9   = 1/2[x8,x10];
+  y9r  = 1/2[x_height,h];
+  y10r = 1/4[y9l,y8];
+  x8l - lft x10r = hook_jut;
+
+  % filldraw stroke z8e{up}...{left}z9e...{down}z10e;
+  filldraw stroke super_arc.e(8,9) & super_arc.e(9,10);
+  
+  penlabels(0,1,2,3,4,5,6,7,8,9,10);
+
+endchar;
+
+cmchar "Overturned lb ligature";
+beginchar(oct "021",12u#,x_height#,desc_depth#); 
+  italcorr 0.7x_height#*slant - 0.5u#;
+  adjust_fit(0,0);
+  
+  pickup crisp.nib;
+  
+  slope  := 20;
+  obstem := stem/cosd(slope);
+  tsep   := 3.75*stem;
+  thair  := 0.3[hair,obstem];
+  
+  % 1-2-11-4-5-6 is the left trunk and flourish, 3 is a utility point
+  
+  pos1(stem,0);
+  pos2(obstem,0);
+  pos4(hair,180-slope);
+  pos5(hair,-slope);
+  pos11(thair,90);
+  
+  %x1l = 0.5u;
+  x2  = x1;
+  bot y1  = y3 = -d;
+  y2  = 0.70*x_height;
+
+  z2-z3 = whatever*dir(180-slope);
+
+  z4 = 1.13[z3,z2];
+  z5 = whatever[z3,z2];
+
+  x5r = w-0.5u;
+  x4r = 0.5u;
+  
+  % z11 lifts the left stroke
+
+  z11  = 0.5[z2,z4] + whatever*dir(90);
+  top y11r = x_height + o;
+  
+  % z6 might be better half-way between the trunks
+
+  z6 = 0.89[z3,z2];
+  pos6(hair,angle(z6-z1)+90);
+    
+  filldraw stroke z1e--z2e{z2-z1}..z11e..{z1-z2}z4e..tension(1.0)..z5e{z2-z1}..z6e{z1-z6};
+  
+  penlabels(1,2,3,11,4,5,6);
+  
+  % the right trunk with foot
+
+  pos7(stem,0);
+  pos8(hair,90);
+  pos9(obstem,0);
+  pos10(hair,180-slope);
+
+  x7-x1 = x9-x2 = tsep;
+  y7 = y1;
+  y9 = y2;
+
+  % the vertical lift point
+  
+  x8  = 0.3[x9,x2];
+  top y8r = x_height + o;
+  
+  z10l = 0.8[z1r,z2r];
+  
+  filldraw stroke z7e--z9e{z9-z7}...z8e{left}..tension(2.0)..{z7-z9}z10e;
+
+  % serif(7,9,a,1/3,cap_jut);
+  sloped_serif.r(7,9,a,1/3,jut,serif_drop);  % serif
+  
+  penlabels(7,8,9,10);
+  
+endchar;
+
+cmchar "inverted F";
+beginchar("F",11.5u#-width_adj#,x_height#,desc_depth#);
+  italcorr x_height#*slant-cap_jut#+0.5u#;
+  adjust_fit(0,cap_serif_fit#);
+
+  h := vround(h-stem_corr);
+  
+  pickup tiny.nib;
+
+  pos1(cap_stem,0);
+  pos2(cap_stem,0);
+
+  rt x1r = rt x2r = hround w - max(2u,3u-0.5cap_stem);
+  top y1 = x_height;
+  bot y2 = -desc_depth;
+  
+  filldraw stroke z1e--z2e; % stem
+  
+  pickup crisp.nib;
+  
+  pos3(slab,-90);
+  pos4(hair,180);
+  
+  bot y3r = -desc_depth;
+  x3 = x1;
+  rt x4r = hround(0.75u);
+  y4 = good.y(y3r+beak)-eps;
+  
+  arm(3,4,e,beak_darkness,beak_jut);  % upper arm and beak
+
+  pos5(cap_bar,-90);
+  pos6(hair,180);
+  
+  top y5l = vround(.5[y2,y1]+.5cap_bar);
+  x5 = x1;
+  pos0(cap_bar,90);
+  
+  pos7(hair,180);
+  z0 = z5;
+  x6 = x7;
+  y6-y5l = y0l-y7;
+  
+  rt x6r = hround(4u-.5hair);
+  y6 = good.y(y5l+.6beak) + eps;
+  rt x9r = hround(w-.5u);
+
+  arm(5,6,f,beak_darkness,0);
+  arm(0,7,g,beak_darkness,0);  % middle arm and serif
+  
+  nodish_serif(1,2,a,1/3,cap_jut,b,1/3,.5cap_jut);  % upper serif
+  dish_serif(2,1,c,1/3,cap_jut,d,1/3,1.25cap_jut);  % lower serif
+  
+  math_fit(0,ic#-2.5u#);
+  penlabels(0,1,2,3,4,5,6,7);
+
+endchar;
+
+end
\ No newline at end of file
diff --git a/Master/texmf-dist/fonts/source/public/fge/fgeit10.mf b/Master/texmf-dist/fonts/source/public/fge/fgeit10.mf
new file mode 100644
index 00000000000..2f366ea0cdf
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/fge/fgeit10.mf
@@ -0,0 +1,83 @@
+% FGE italic 10 point
+% this is derived from cmti10.mf by Knuth
+% J.J.Green 2006
+% $Id: fgeit10.mf,v 1.2 2007/02/19 23:19:11 jjg Exp $
+
+if unknown cmbase:  input cmbase fi
+if unknown fgebase: input fgebase fi
+
+font_identifier := "FGEIT";
+font_size 10pt#;
+
+u#             := 18.4/36pt#;	% unit width
+width_adj#     := 0pt#;	        % width adjustment for certain characters
+serif_fit#     := 0pt#;		% extra sidebar near lowercase serifs
+cap_serif_fit# := 5/36pt#;	% extra sidebar near uppercase serifs
+letter_fit#    := 9.2/36pt#;    % extra space added to all sidebars
+
+body_height#   := 270/36pt#;	% height of tallest characters
+asc_height#    := 250/36pt#;    % height of lowercase ascenders
+cap_height#    := 246/36pt#;    % height of caps
+fig_height#    := 232/36pt#;    % height of numerals
+x_height#      := 155/36pt#;    % height of lowercase without ascenders
+math_axis#     := 90/36pt#;	% axis of symmetry for math symbols
+bar_height#    := 87/36pt#;	% height of crossbar in lowercase e
+comma_depth#   := 70/36pt#;	% depth of comma below baseline
+desc_depth#    := 70/36pt#;	% depth of lowercase descenders
+
+crisp#         := 8/36pt#;	% diameter of serif corners
+tiny#          := 8/36pt#;      % diameter of rounded corners
+fine#          := 7/36pt#;      % diameter of sharply rounded corners
+thin_join#     := 7/36pt#;	% width of extrafine details
+hair#          := 11/36pt#;	% lowercase hairline breadth
+stem#          := 23/36pt#;	% lowercase stem breadth
+curve#         := 28/36pt#;	% lowercase curve breadth
+ess#           := 27/36pt#;	% breadth in middle of lowercase s
+flare#         := 29/36pt#;     % diameter of bulbs or breadth of terminals
+dot_size#      := 38/36pt#;	% diameter of dots
+cap_hair#      := 11/36pt#;	% uppercase hairline breadth
+cap_stem#      := 29/36pt#;	% uppercase stem breadth
+cap_curve#     := 34/36pt#;	% uppercase curve breadth
+cap_ess#       := 31/36pt#;	% breadth in middle of uppercase s
+rule_thickness# := .4pt#;	% thickness of lines in math symbols
+
+dish#          := 1/36pt#;      % amount erased at top or bottom of serifs
+bracket#       := 20/36pt#;     % vertical distance from serif base to tangent
+jut#           := 30/36pt#;	% protrusion of lowercase serifs
+cap_jut#       := 34/36pt#;	% protrusion of uppercase serifs
+beak_jut#      := 9/36pt#;	% horizontal protrusion of beak serifs
+beak#          := 70/36pt#;	% vertical protrusion of beak serifs
+vair#          := 8/36pt#;      % vertical diameter of hairlines
+notch_cut#     := 10pt#;        % maximum breadth above or below notches
+bar#           := 11/36pt#;	% lowercase bar thickness
+slab#          := 11/36pt#;	% serif and arm thickness
+cap_bar#       := 11/36pt#;	% uppercase bar thickness
+cap_band#      := 11/36pt#;     % uppercase thickness above/below lobes
+cap_notch_cut# := 10pt#;        % max breadth above/below uppercase notches
+serif_drop#    := 4/36pt#;	% vertical drop of sloped serifs
+stem_corr#     := 1/36pt#;      % for small refinements of stem breadth
+vair_corr#     := 1/36pt#;      % for small refinements of hairline height
+apex_corr#     := 0pt#;		% extra width at diagonal junctions
+
+o#             := 8/36pt#;      % amount of overshoot for curves
+apex_o#        := 8/36pt#;      % amount of overshoot for diagonal junctions
+
+slant          := .25;		% tilt ratio $(\Delta x/\Delta y)$
+fudge          := 1;            % factor applied to weights of heavy characters
+math_spread    := 0;		% extra openness of math symbols
+superness      := 1/sqrt2;	% parameter for superellipses
+superpull      := 1/6;		% extra openness inside bowls
+beak_darkness  := 11/30;        % fraction of triangle inside beak serifs
+ligs           := 2;		% level of ligatures to be included
+
+square_dots    := false;	% should dots be square?
+hefty          := false;        % should we try hard not to be overweight?
+serifs         := true;         % should serifs and bulbs be attached?
+monospace      := false;        % should all characters have the same width?
+variant_g      := true;         % should an italic-style g be used?
+low_asterisk   := false;        % should the asterisk be centered at the axis?
+math_fitting   := true;        % should math-mode spacing be used?
+
+% switch to the driver file
+
+generate fgeit
diff --git a/Master/texmf-dist/fonts/source/public/fge/fgerm.mf b/Master/texmf-dist/fonts/source/public/fge/fgerm.mf
new file mode 100644
index 00000000000..c2d829f4f03
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/fge/fgerm.mf
@@ -0,0 +1,1440 @@
+% fgerm.mf : fge roman charcters
+% J.J. Green 2005-2006
+% $Id: fgerm.mf,v 1.25 2007/06/03 16:07:56 jjg Exp $
+
+mode_setup;
+font_setup;
+
+proofing := 2;
+
+% The Russell class -- the class of all classes which
+% are not members of themselves.
+
+cmchar "Overturned A";
+beginchar("A",13u#,x_height#,desc_depth#);
+  adjust_fit(cap_serif_fit#,cap_serif_fit#);
+  
+  numeric left_stem,right_stem,outer_jut,alpha;  
+  right_stem = cap_stem-stem_corr;
+  left_stem  = min(cap_hair,right_stem);
+  outer_jut  = 0.8cap_jut;
+  
+  w-x1l = x4r = l+letter_fit+outer_jut+0.5u;
+  y1 = y4 = h;
+  x2-x1 = x4-x3;
+  x3r = x2r+apex_corr;
+  y2 = y3 = -d-apex_o-apex_oo;
+
+  alpha = diag_ratio(2,left_stem,y2-y1,x4r-x1l-apex_corr);
+  penpos1(alpha*left_stem,180);
+  penpos2(alpha*left_stem,180);
+  penpos3(alpha*right_stem,180);
+  penpos4(alpha*right_stem,180);
+
+  z0=whatever[z1r,z2r]=whatever[z3l,z4l];
+
+  fill z0--diag_end(0,4l,1,1,4r,3r)--diag_end(4r,3r,1,1,2l,1l)
+    --diag_end(2l,1l,1,1,1r,0)--cycle;
+  
+  penpos5(whatever,angle(z2-z1)); z5=whatever[z1,z2];
+  penpos6(whatever,angle(z3-z4)); z6=whatever[z3,z4];
+  y6 = y5;
+  y5 = 5/12(h-y0);
+  y5r-y5l = y6r-y6l = cap_band;
+  
+  penstroke z5e--z6e; % bar line
+
+  numeric inner_jut;
+
+  % for the reversed serifs it is easier to introduce
+  % new control points which are "the right way around"
+  % since prime_points_inside() and dish_serif()
+  % have the left & right sides of the points hard-coded
+  
+  penpos11(alpha*left_stem,0);
+  penpos12(alpha*left_stem,0);
+  z11 = z1;
+  z12 = z2;
+
+  penpos13(alpha*right_stem,0);
+  penpos14(alpha*right_stem,0);
+  z13 = z3;
+  z14 = z4;
+    
+  pickup tiny.nib;
+  prime_points_inside(11,12);
+  prime_points_inside(14,13);
+  
+  inner_jut = cap_jut;
+  
+  dish_serif(11',12,a,0.6,inner_jut,b,1/2,outer_jut)(dark);
+  dish_serif(14',13,c,1/3,outer_jut,d,1/2,inner_jut);
+  
+  penlabels(0,1,2,3,4,5,6);
+  
+endchar;
+
+% rotated eszett
+
+beginchar(oct"031",4.5u#+max(4.5u#,.5stem#+flare#+curve#),x_height#,desc_depth#);
+  adjust_fit(0,serif_fit#);
+
+  pickup tiny.nib;
+
+  pos1(stem',180);
+  pos2(stem',180);
+  rt x1l = rt x2l = hround(w-2.5u+.5stem');
+  top y1 = h;
+  y2 = y4 = 0.5[0,y3];
+  
+  penpos3(vair-fine,270);
+  fine.bot y3r = -d-oo;
+  
+  filldraw stroke z1e--z2e;  % stem
+
+  numeric stem_edge,curve';
+  stem_edge = lft x1r;
+  curve' = hround .5[stem',curve];
+  pickup fine.nib;
+  pos4(curve',180);
+  pos5(vair,90);
+  pos2'(stem',0);
+  z2' = z2;
+  x3  = 0.5[x2,x4];
+  lft x4r = hround(u);
+  bot y5l = 0;
+  rt x5 = hround(stem_edge-u);
+  filldraw stroke pulled_super_arc.e(2',3)(.5superpull)
+  & pulled_super_arc.e(3,4)(.5superpull)
+  & pulled_super_arc.e(4,5)(.5superpull);  % upper bowl
+
+  pos5'(vair,270);
+  z5' = z5;
+  pos6(curve',180);
+  pos7(vair,90);
+  lft x6r = hround(0.5u)+3eps;
+  y6 = .6x_height;
+  top y7r = x_height+oo;
+  pos8(hair,0);
+  rt x8r = hround(stem_edge-.5u-1);
+  x7 = 0.4[rt x8r,x6];
+  filldraw stroke pulled_super_arc.e(5',6)(.5superpull)
+  & pulled_super_arc.e(6,7)(.5superpull);  % lower bowl
+  
+  pos9(5/7[vair,flare],0);
+  y9-(x9-lft x9r) = vround 0.93x_height;
+  bulb(7,8,9);  % bulb
+
+  % this bar is not in the original 
+  % penpos0(stem'-tiny,0);
+  % x0 = x1;
+  % tiny.bot y0 = 0;
+  % serif(0,1,a,0,jut);  % bar
+
+  z11 = z1;
+  z12 = z2; 
+  penpos11(stem',0);
+  penpos12(stem',0);
+  
+  dish_serif(11,12,b,1/3,-jut,c,0,epsilon);  % serif
+
+  penlabels(0,1,2,3,4,5,6,7,8);
+  
+endchar;
+
+% rotated 2, 3, B, C, taken from romanu.mf
+%
+% here we use that
+% u#          := 20/36pt#;
+% cap_height# := 246/36pt#;
+% fig_height# := 232/36pt#
+% and so cap_height/u = 11.6, fig_height/u = 12.3
+ 
+cmchar "downward 2";
+beginchar("2",14u#,x_height#,0);
+  adjust_fit(0,0);
+
+  numeric arm_thickness, hair_vair;
+
+  hair_vair = 0.25[vair,hair];
+  arm_thickness = Vround(if hefty:slab+2stem_corr else:.4[stem,cap_stem] fi);
+
+  pickup crisp.nib;
+  
+  pos7(arm_thickness,0);
+  pos8(hair,90);
+  rt x7r  = hround(w-0.9u);
+  bot y7  = 0;
+  top y8r = h+o/2;
+  x8 = good.x(x7l-beak/2) - eps;
+  
+  varm(7,8,a,0.3beak_darkness,beak_jut);  % arm and beak
+
+  pickup fine.nib;
+
+  pos2(slab,180);
+  pos3(.4[curve,cap_curve],90);
+  
+  lft x2r = 0.9u;
+  y2 = h/2;
+  top y3r = h+o/2;
+  x3 = x0;
+  
+  numeric bulb_diam;
+  bulb_diam=hround(flare+2/3(cap_stem-stem));
+
+  pos0(bulb_diam,-90);
+  pos1(cap_hair,-90);
+
+  bot y0r = -o/2;
+  x1 + 0.5 bulb_diam = 1/3(w-1.8u) + 0.9u;
+  %(x2l,y) = whatever[z1l,z2r];
+  %y2l := y;
+  dlbulb(2,1,0);  % bulb and arc
+  
+  pos4(0.25[hair_vair,cap_stem],90);
+  pos5(hair_vair,90);
+  pos6(hair_vair,90);
+
+  x5 + arm_thickness = w - 0.9u;
+  x4 = 0.3[x5,x3];
+  rt x6 = w - 0.9u - slab;  
+  bot y6 = crisp.bot y7;
+
+  z4l = whatever[z6l,(0.50w,y3l)];
+  z5l = whatever[z6l,z4l];
+
+  % erase excess at left
+  erase fill z4l--z6l--bot z6l--(x4l,bot y6l)--cycle;  
+
+  % stroke
+  filldraw stroke z2e{up}..tension atleast .9 and atleast 1
+  ..z3e{right}..{z5e-z4e}z4e--z5e--z6e;  
+
+  penlabels(0,1,2,3,4,5,6,7,8);
+endchar;
+
+cmchar "upward 2";
+beginchar("4",14u#,x_height#,0);
+  adjust_fit(0,0);
+
+  numeric arm_thickness, hair_vair;
+
+  hair_vair = 0.25[vair,hair];
+  arm_thickness = Vround(if hefty:slab+2stem_corr else:.4[stem,cap_stem] fi);
+
+  pickup crisp.nib;
+  
+  pos7(arm_thickness,180);
+  pos8(hair,-90);
+  lft x7r = hround(0.9u);
+  top y7  = h;
+  bot y8r = -o/2;
+  x8 = good.x(x7l+beak/2) + eps;
+  
+  varm(7,8,a,.3beak_darkness,-beak_jut);  % arm and beak
+
+  pickup fine.nib;
+
+  pos2(slab,0);
+  pos3(.4[curve,cap_curve],-90);
+  
+  rt x2r = w-0.9u;
+  y2 = h/2;
+  bot y3r = -o/2;
+  x3 = x0;
+  
+  numeric bulb_diam;
+  bulb_diam=hround(flare+2/3(cap_stem-stem));
+
+  pos0(bulb_diam,90);
+  pos1(cap_hair,90);
+
+  top y0r = h+o/2;
+  x1 - 0.5 bulb_diam = 2/3(w-1.8u) + 0.9u;
+  %(x2l,y) = whatever[z1l,z2r];
+  %y2l := y;
+  dlbulb(2,1,0);  % bulb and arc
+  
+  pos4(0.25[hair_vair,cap_stem],-90);
+  pos5(hair_vair,-90);
+  pos6(hair_vair,-90);
+
+  x5 = arm_thickness + 0.9u;
+  x4 = 0.3[x5,x3];
+  lft x6 = 0.9u + slab;  
+  top y6 = crisp.top y7;
+
+  z4l = whatever[z6l,(0.50w,y3l)];
+  z5l = whatever[z6l,z4l];
+
+  erase fill z4l--z6l--top z6l--(x4l,top y6l)--cycle;  
+
+  % stroke
+  filldraw stroke z2e{down}..tension atleast .9 and atleast 1
+  ..z3e{left}..{z5e-z4e}z4e--z5e--z6e;  
+
+  penlabels(0,1,2,3,4,5,6,7,8);
+endchar;
+
+cmchar "downward 3";
+beginchar("3",14u#,x_height#,0);
+  adjust_fit(0,0);
+
+  numeric top_thickness,mid_thickness,bot_thickness;
+  
+  top_thickness=max(fine.breadth,vround(slab-2vair_corr));
+  mid_thickness=max(fine.breadth,vround 2/3vair);
+  bot_thickness=max(fine.breadth,vround(slab-vair_corr));
+  
+  pickup fine.nib;
+
+  pos2(top_thickness,180);
+  lft x2r = 0.9u;
+
+  pos3(max(fine.breadth,.6[curve,cap_curve]-stem_corr),90);
+  top y3r=hround(h-0.75u+o);
+
+  pos4(vair,0);
+  pos5(vair,0);
+  pos6(mid_thickness,180);
+  y2 = y6 = y8 = 0.5[0.75u,y7];
+
+  pos7(cap_curve,90);
+  top y7r = hround(h+o);
+  bot y5 = min(vround 3u,bot y6)-eps;
+  
+  pos8(bot_thickness,0);
+  rt x8r = w-0.9u;
+
+  x3 = 0.55[lft x4l,rt x2l];
+  x7 = 0.5[lft x6l,rt x8l];
+  lft x5l = hround(0.9u+.46(w-1.8u)-0.5vair);
+  
+  x5r = x6l;
+  
+  y4 = 1/3[y5,y3l];
+  z4 = z5 + whatever*(-0.1fig_height,15u);
+
+  filldraw stroke pulled_super_arc.e(2,3)(.5superpull)
+    & z3e{right}...z4e---z5e;  % upper bowl
+  filldraw z5r--z6l--z6r--z5l---cycle;  % middle tip
+  filldraw stroke pulled_super_arc.e(6,7)(.5superpull)
+    & pulled_super_arc.e(7,8)(.5superpull);  % lower bowl
+
+  numeric bulb_diam[];
+  
+  bulb_diam1 = flare + 0.5(cap_stem-stem);
+  bulb_diam2 = flare + cap_stem-stem;
+
+  pos0(bulb_diam1,-90);
+  pos1(hair,-90);
+  lft y0r = hround 0.25u;
+  x0 = x3;
+  
+  dlbulb(2,1,0);  % upper bulb
+
+  pos10(bulb_diam2,270);
+  pos9(cap_hair,-90);
+  bot y10r = hround(-0.25u);
+
+  x10 = 0.9u + 0.7(w-1.8u) + 0.5bulb_diam2;
+
+  drbulb(8,9,10);  % lower bulb
+
+  penlabels(0,1,2,3,4,5,6,7,8,9,10);
+endchar;
+
+cmchar "upward B";
+beginchar("D",13u#,x_height#,0);
+
+  numeric left_stem,right_curve,middle_weight;
+  left_stem = cap_stem - hround 2stem_corr;
+  middle_weight = 0.6vair + 0.5;
+  
+  pickup tiny.nib;
+
+  pos1(left_stem,-90);
+  pos2(left_stem,-90);
+  bot y1r = bot y2r = 0;
+  lft x1 = u;
+  rt x2 = w-u;
+  filldraw stroke z1e--z2e; % stem
+  
+  penpos3(cap_band,180);
+  penpos4(cap_band,180);
+  penpos6(middle_weight,0);
+  penpos7(middle_weight,0);
+  penpos8(middle_weight,180);
+  penpos9(middle_weight,180);
+  penpos5(right_curve-stem_corr,90);
+  penpos10(right_curve,90);
+  penpos11(cap_band,0);
+  penpos12(cap_band,0);
+  
+  z3r = lft z1;
+  x4  = x3;
+  x5  = 0.5[x4,x6];
+  x6  = x7;
+  x8l-x7l = vair;
+  z12r = rt z2;
+  x11 = x12;
+  x10 = 0.5[x11,x9];
+  x8 = x9;
+  0.5[x7l,x8l] = u+0.48(w-2u);
+  y4 = y6;
+  y9 = y11 = y4+0.5u;
+  y7 = y8 = y1;
+  y9l :=  y4+0.25u;
+  y5r  = vround(h+o-0.5u);
+  y10r = vround(h+o);
+
+  right_curve = cap_curve-stem_corr;
+  y4 = 0.45[y1,h+o];
+
+  y6l  := y6l-0.5u;
+  y11l := y11l-0.5u;
+
+  fill stroke z3e..super_arc.e(4,5) & super_arc.e(5,6)..z7e;  % upper lobe
+  fill stroke z8e..super_arc.e(9,10) & super_arc.e(10,11)..z12e;  % lower lobe
+
+  hserif(1,2,a,1/3,-cap_jut);
+  hserif(1,2,b,1/3,1/2cap_jut);
+  hserif(2,1,c,1/3,-cap_jut);
+  hserif(2,1,d,1/3,1/2cap_jut);
+  
+  math_fit(0,0.5ic#);
+  penlabels(1,2,3,4,5,6,7,8,9,10,11,12);
+
+endchar;
+
+cmchar "downward B";
+beginchar("B",13u#,x_height#,0);
+
+  numeric left_stem,right_curve,middle_weight;
+  left_stem = cap_stem - hround 2stem_corr;
+  middle_weight = 0.6vair + 0.5;
+  
+  pickup tiny.nib;
+
+  pos1(left_stem,-90);
+  pos2(left_stem,-90);
+  top y1l = top y2l = h;
+  rt x1 = w-u;
+  lft x2 = u;
+  filldraw stroke z1e--z2e; % stem
+  
+  penpos3(cap_band,0);
+  penpos4(cap_band,0);
+  penpos6(middle_weight,180);
+  penpos7(middle_weight,180);
+  penpos8(middle_weight,0);
+  penpos9(middle_weight,0);
+  penpos5(right_curve-stem_corr,-90);
+  penpos10(right_curve,-90);
+  penpos11(cap_band,180);
+  penpos12(cap_band,180);
+  
+  z3r = rt z1;
+  x4  = x3;
+  x5  = 0.5[x4,x6];
+  x6  = x7;
+  x7l-x8l = vair;
+  z12r = lft z2;
+  x11 = x12;
+  x10 = 0.5[x11,x9];
+  x8 = x9;
+  0.5[x7l,x8l] = u+0.52(w-2u);
+  y4 = y6;
+  y9 = y11 = y4-0.5u;
+  y7 = y8 = y1;
+  y9l := y4+0.25u;
+  y5r  = vround(0.5u-o);
+  y10r = vround(-o);
+
+  right_curve = cap_curve-stem_corr;
+  y4 = 0.45[y1,-o];
+
+  y6l  := y6l+0.5u;
+  y11l := y11l+0.5u;
+
+  fill stroke z3e..super_arc.e(4,5) & super_arc.e(5,6)..z7e;  % upper lobe
+  fill stroke z8e..super_arc.e(9,10) & super_arc.e(10,11)..z12e;  % lower lobe
+
+  hserif(1,2,a,1/3,cap_jut);
+  hserif(1,2,b,1/3,-1/2cap_jut);
+  hserif(2,1,c,1/3,cap_jut);
+  hserif(2,1,d,1/3,-1/2cap_jut);
+  
+  math_fit(0,0.5ic#);
+  penlabels(1,2,3,4,5,6,7,8,9,10,11,12);
+
+endchar;
+
+% unlike the others there is no way to squeeze the
+% rotated C to an x-height character, nor cap-height.
+% So although on the baseline, this rather awkwardly
+% ascends half way between them
+
+cmchar "upward C";
+beginchar("C",13u#,cap_height#,0);
+ adjust_fit(0,0);
+ 
+ pickup fine.nib;
+
+ pos1(cap_hair,90);
+ pos2(cap_band,180);
+ pos3(cap_curve,-90);
+ pos4(cap_band,0);
+ pos5(hair,90);
+ 
+ top y1r = top y5r = 0.5[x_height,h];
+ bot y3r = -o;
+ y2 = y4 = 0.55[y3,y1];
+ 
+ lft x2r = u;
+ rt  x4r = hround(w-u);
+ x3 = 0.5[x2,x4];
+ 
+ rt  x1 = u + 0.4(w-2u);
+ lft x5 = w - u - 0.95(x1-u);
+ (x2l,y2l') = whatever[z2r,z1l]; y2l := min(y2l',y2l+.5u);
+ (x4l,y4l') = whatever[z4r,z5l]; y4l := min(y4l',y4l+.5u);
+ filldraw stroke z1e{10(x2-x1),y2-y1}
+ ...pulled_arc.e(2,3) & pulled_arc.e(3,4)...{left}z5e; % arc
+ 
+ pos6(0.3[fine.breadth,cap_hair],90);
+ y6r = y1r;
+ lft x6 = u;
+ y1r-y1'=2cap_curve-fine;
+ x1'=x1;
+
+ path upper_arc;
+
+ upper_arc=z1{10(x2-x1),y2-y1}..z2{down};
+
+ numeric t;
+
+ t = xpart(upper_arc intersectiontimes (z6l--z1'));
+
+ filldraw z1r--z6r--z6l--subpath(t,0) of upper_arc--cycle; % barb
+
+ math_fit(-.3cap_height#*slant-.5u#,.5ic#);
+ penlabels(1,1',2,3,4,5,6);
+endchar;
+
+% fletched arrows, which are 4u longer than the cm
+% right and up arrows. These are not identical -- the
+% head on the upward arrow is slighty wider than the
+% rightward
+
+numeric fwdt,fjut,fang;
+
+fwdt := 2/3 rule_thickness;
+fjut := 1.3;
+fang := 60;
+
+vardef fletch(suffix $,$$,@) =
+  fletchLR($,$$,@,fang,90,fwdt,fjut);
+  fletchLR($,$$,@',-fang,-90,fwdt,fjut);
+enddef;
+
+vardef fletchLR(suffix $,$$,@)(expr a,r,wdt,len) =
+  numeric b,c;
+  b := angle(z$$-z$);  
+  z@1 = z$  + len * ((z$$-z$) rotated a);
+  z@2 = z@1 + whatever*((z$ - z@1) rotated r);
+  z@2 = z$$ + whatever*((z$$ - z$) rotated a);
+  z@3 = z@4 = z$;
+  c := angle(z@1-z@2);
+  penpos@1(wdt,c);
+  penpos@2(wdt,c+180);
+  penpos@3(wdt,b-r);
+  penpos@4(wdt,b+180);
+  penstroke z@4e--z@1e...z@2e{z$-z@1}...{z$-z$$}z@3e;
+  penlabels(@1,@2,@3);
+enddef;
+
+cmchar "Upward arrow with fletching";
+beginchar(oct "042",8u#,asc_height#+2u#,asc_depth#+2u#);
+  adjust_fit(0,0);
+
+  pickup crisp.nib;
+  
+  pos1(rule_thickness,0);
+  pos2(rule_thickness,0);
+  pos3(rule_thickness,90);
+  pos4(rule_thickness,90);
+
+  numeric headh,headw;
+  
+  headw := (w-u)/2+eps;
+  headh := 0.36*w/(9u)*asc_height+eps;
+  
+  lft x1l = hround(0.5w - 0.5rule_thickness);
+
+  x0 = x1 = x2;
+  top y0 = h;
+  x0-x3 = x4-x0 = headw;
+  y3 = y4 = y0 - headh;
+  
+  pos5(rule_thickness,angle(z4-z0));
+  z5l=z0;
+  
+  pos6(rule_thickness,angle(z3-z0));
+  z6l=z0;
+  z9 = 0.2[0.5[z3,z4],z0];
+
+  numeric rake;
+
+  rake = y5l - y3r;
+  
+  y1 - 0.5 rule_thickness - rake = -d;
+
+  numeric t; path p;
+  
+  p=z4l{z9-z4}..z6r;
+  t=xpart(p intersectiontimes((x2r,-d)--(x2r,h))); y2=ypart point t of p;
+
+  filldraw z0..{z4-z9}z4r--subpath (0,t) of\\(z4l{z9-z4}..z6r)
+  ---z1r---z1l---subpath (t,0) of\\(z3l{z9-z3}..z5r)
+  --z3r{z9-z3}..z0 & cycle;  % arrowhead and stem
+
+  penlabels(0,2,3,4,5,6,9);
+
+  % fletching
+  
+  x10 = x11 = x12 = x13 = x1; 
+  y11-y10 = y12-y11 = y13-y12 = 3/5rake;  % fletch separation
+  y11 = y1;
+
+  fletch(11,10,a);
+  fletch(12,11,b);
+  fletch(13,12,c);
+  
+  labels(10,11,12,13);
+  
+endchar;
+
+cmchar "Rightward arrow with fletching";
+compute_spread(0.45x_height#,0.55x_height#);
+beginchar(oct "041",22u#,v_center(spread#+rule_thickness#));
+  adjust_fit(0,0);
+
+  pickup crisp.nib;
+  
+  pos1(rule_thickness,90);
+  pos2(rule_thickness,90);
+  pos3(rule_thickness,0);
+  pos4(rule_thickness,0);
+
+  y0 = y1 = y2 = math_axis;
+  rt x0 = hround(w-u);
+
+  numeric headw,headh;
+
+  headw = 0.26 asc_height+eps;
+  headh = 4u + eps;
+  
+  y3-y0 = y0-y4 = headw;
+  x3 = x4 = x0 - headh;
+  
+  pos5(rule_thickness,angle(z4-z0));
+  pos6(rule_thickness,angle(z3-z0));
+  
+  z5l = z0;
+  z6l = z0;
+  z9  = 0.2[0.5[z3,z4],z0];
+
+  numeric rake;
+
+  rake = x5l - x3r;
+  
+  x1 = hround(2u + 3/5rake);
+  
+  numeric t; path p; p=z4l{z9-z4}..z6r;
+
+  t=xpart(p intersectiontimes((0,y2l)--(w,y2l))); x2=xpart point t of p;
+  
+  filldraw z0..{z4-z9}z4r--subpath (0,t) of\\(z4l{z9-z4}..z6r)
+  ---z1l---z1r---subpath (t,0) of\\(z3l{z9-z3}..z5r)
+  --z3r{z9-z3}..z0 & cycle;  % arrowhead and stem
+
+  penlabels(0,1,2,3,4,5,6,9);
+
+  % fletching
+  
+  y10 = y11 = y12 = y13 = math_axis; 
+
+  x11-x10 = x12-x11 = x13-x12 = 3/5rake;
+  x11 = hround x1;  
+  
+  fletch(11,10,a);
+  fletch(12,11,b);
+  fletch(13,12,c);
+  
+  labels(10,11,12,13);
+  
+endchar;
+
+% these struckout numerals are lifted directly from
+% romand.mf, with the strikeout added at the end
+
+cmchar "Reverse struckout 0";
+beginchar("0",9u#,fig_height#,0);
+  adjust_fit(0,0);
+  
+  penpos1(vair,90);
+  penpos3(vair,-90);
+  penpos2(curve,180);
+  penpos4(curve,0);
+
+  interim superness := sqrt(more_super*hein_super);
+  
+  x2r = hround max(.7u,1.45u-.5curve);
+  x4r = w-x2r;
+  x1 = x3 = 0.5w;
+  y1r = h+o;
+  y3r = -o;
+  y2=y4 = 0.5h-vair_corr;
+  y2l := y4l := 0.52h;
+  
+  penstroke pulled_arc.e(1,2)
+  & pulled_arc.e(2,3)
+  & pulled_arc.e(3,4)
+  & pulled_arc.e(4,1) & cycle;  % bowl
+  
+  penlabels(1,2,3,4);
+
+  % the strikeout
+
+  pickup rule.nib;
+
+  bot y5 = 0;
+  top y6 = y1r + y3r;
+  x5 = x4r;
+  x6 = x2r;
+
+  draw z5--z6;
+  labels(5,6);
+  
+endchar;
+
+cmchar "Reverse struckout 1";
+beginchar("1",9u#,fig_height#,0);
+  adjust_fit(0,0);
+  
+  numeric light_stem;
+  light_stem=hround .4[stem',cap_stem'];
+  
+  pickup tiny.nib;
+  pos1(light_stem,0);
+  pos2(light_stem,0);
+  
+  lft x1l=lft x2l=hround(.5(w+.5u)-.5cap_stem');
+  top y1=h+o;
+  bot y2=0;
+  
+  filldraw stroke z1e--z2e;  % stem
+  
+  if not serifs: save slab; slab=bar; fi
+
+  dish_serif(2,1,a,1/3,min(2.25u,lft x2l-1.5u),
+    b,1/3,min(2.25u,w-1.25u-rt x2r)); % serif
+  
+  pickup crisp.nib;
+
+  pos3(slab,-90);
+  pos4(bar,-90);
+  
+  top y3l=h+o;
+  top y4l=if monospace: .8 else: .9 fi\\ h+o;
+
+  lft x4=max(1.25u,tiny.lft x1l-2.35u);
+  tiny.rt x1r=lft x3+.25[tiny,hair];
+  
+  erase fill z3l{x4l-x3l,3(y4l-y3l)}...z4l{left}
+  --(x4l,h+o+1)--(x3l,h+o+1)--cycle; % erase excess at top
+
+  filldraw stroke z3e{x4e-x3e,3(y4e-y3e)}..z4e{left};  % point
+
+  penlabels(1,2,3,4);
+
+  % the strikeout -- possible raise z6 a little
+
+  pickup rule.nib;
+
+  y4r - top y5 = bot y6 - y2;  
+  top y5 = x_height;
+  x5 = w-x6 = x4;
+
+  draw z5--z6;
+  
+  labels(5,6);
+  
+endchar;
+
+% this is used with \mathaccent, but unlike the computer modern
+% math accents it starts on the baseline, rather than at x_height.
+% Knuth uses some dark magic in the cm sources to place this
+% correctly with respect to the character to be accented, I couldn't
+% reproduce it. So, this is like the cm accents, but with x_height 
+% subtracted from the heights
+% 
+% This rather nice version (much better than my effort) was taken
+% from ibyacc4.mf, part of the ibycus font for classical greek by
+% Pierre A. MacKay, from work by Silvio Levy's realization of a
+% classic Didot cut of Greek type from around 1800.
+
+def smooth(suffix $,@)(expr dot_size,depth,shear) =
+  pickup fine.nib;
+
+  pos$(dot_size,90);
+  pos@1(vair,90);
+  pos@2(vair,0);
+  pos@3(vair,-90);
+
+  z@1r  = z$r;
+  y@1l := y$;
+  rt x@2r = hround(x$+0.5depth+0.5shear);
+  x@3-0.5vair = hround(x$-0.5dot_size+shear);
+  y@2 = .5[y@1,y@3];
+  bot y@3r = vround(top y@1r-depth);
+
+  path pp; pp = (z@2{down}...z@3);
+  
+  % position a vertical path through the right side of the bulb
+  x@1' = x@1+.05dot_size;
+  
+  % At the intersection of that path with SL's tail, get the direction
+  pair d@@; d@@=( direction
+    (xpart( (z@2{down}...z@3) intersectiontimes ((x@1',0){up}--(x@1',y@1)))) 
+    of (z@2{down}...z@3));
+  
+  % Tilt a pen at a right angle to that direction
+  pos@3'(vair,angle(d@@)+90);
+
+  % Place it at the intersection.  This will be the new end of the tail.
+  z@3' = directionpoint d@@ of(z@2{down}...z@3); 
+  y_ := ypart((z@1{right}...z@2{down}...z@3)
+    intersectiontimes (z$l{right}..{left}z$r)); if y_<0: y_:=1; fi
+  filldraw z$r{left}..subpath (0,y_) of (z$l{right}..{left}z$r)--cycle; % dot
+  filldraw stroke z@1e{right}...z@2e{down}...{d@@}z@3'e;
+
+  penlabels(@1,@2,@3);
+enddef;
+
+cmchar "Spiritus Lenis accent (tailed)";
+beginchar(oct "025",9u#,min(asc_height#-x_height#,x_height#),0); 
+
+  adjust_fit(0,0);
+  
+  numeric dot_diam#;
+  dot_diam# = 3/4dot_size#;
+  define_whole_blacker_pixels(dot_diam);
+
+  x1 = 0.5w - o;
+  y1 = h;
+
+  smooth(1,a,dot_size,3/4h,0);
+
+endchar;
+
+% this is my effort -- closer to the form used by Pohl,
+% a blunted crecent.
+
+cmchar "Spiritus Lenis accent (crescent)";
+beginchar(oct "026",9u#,min(asc_height#-x_height#,x_height#),0); 
+
+  numeric rake;
+  
+  rake = 10;
+  
+  penpos1(hair,270+rake);
+  penpos2(0.3[hair,stem],180);
+  penpos3(hair,90-rake);
+  
+  x1 = x3 = 0.5w - o;
+  y1 = h;
+  y3l = max(h/3,o+hair);
+  y2+y2 = y1+y3;
+  x2 - x1 = 0.65*(y1-y3);
+
+  penstroke z1e{dir(rake)}..z2e..{dir(180-rake)}z3e;
+  
+  penlabels(1,2,3);  
+  
+endchar;
+
+
+% This is the archaic long s with mid bar, used by
+% Frege as the successor functon. The upright stroke
+% is that of Computer Modern's f, but the bar runs
+% along the math-axis rather than the x-height.
+
+cmchar "Long s with midline bar";
+beginchar("s",5.5u#,asc_height#,0);
+  adjust_fit(0,0);
+
+  pickup tiny.nib;
+  pos1(stem',0);
+  lft x1l = hround(2.5u-0.5stem');
+
+  pickup fine.nib;
+  numeric bulb_diam;
+  bulb_diam = hround 0.8[stem,flare];
+  pos2(bulb_diam,0);
+  y2 + 0.5bulb_diam = 0.9[x_height,h+oo];
+  lft x2l = hround(w-0.75u+0.5);
+
+  f_stroke(1,2,a,b,c,jut,1.25jut);
+
+  pickup crisp.nib;
+  pos3(bar,90);
+  pos4(bar,90);
+  y3 = y4 = math_axis;
+  lft x3 = hround(0.5u - 1); 
+  rt  x4 = hround(w - 1/3u);
+
+  filldraw stroke z3e--z4e;
+
+  penlabels(1,2,3,4);
+  
+endchar;
+  
+cmchar "Roman U with flourish";
+beginchar("U",15u#,cap_height#,desc_depth#);
+  adjust_fit(cap_serif_fit#,cap_serif_fit#);
+
+  numeric colsep;
+  
+  % distance between columns
+  
+  colsep := 0.20h;
+
+  pickup fine.nib;
+  
+  % 4-1-2-3-5 is the main part of the U
+    
+  pos1(cap_stem,180);
+  pos2(0.25[cap_hair,cap_stem],270);
+  pos3(cap_hair,0);
+  pos4(cap_stem,180);
+  pos5(cap_hair,0);
+
+  x1r = w-x3r;
+  x3l - x1l = colsep;
+  
+  x4 = x1;
+  x3 = x5;
+
+  x2  = 0.5(x1l+x3l);
+  y1  = y3 = 0.5(x3-x1)-d;
+  y2r = -d-o;
+
+  % 6 & 7 control the bulb on the right arm of the U
+  % note that the top of the bulb is aligned with the
+  % height, not h+o -- that is on purpose
+  
+  pos6(cap_hair,270);
+  pos7(cap_stem,90);
+  
+  y4l = 0.72h;
+  y5l = 0.82h;
+
+  x6  = x5 + 0.6colsep;
+  y6l = h;  
+
+  filldraw stroke z4e..z1e{down}..z2e{right}..z3e{up}..z5e;
+  vbulb(5,6,7);
+
+  % 9-10-11-12 is the flourish 
+  
+  pos9(cap_hair,270);
+  
+  bot y9r  = bot y10r = 0;
+  x9l  = w-x10r = 0.5u;
+  
+  pos11(cap_hair,50);
+  pos12(0.25[cap_hair,cap_stem],270);
+  
+  x11l = x12 = x4 - 0.9colsep;
+  y11  = y4;
+  y12l = h+o;
+  
+  z11l-z10l = whatever*(z11r-z10r);
+  z9l-z10l  = whatever*(z9r-z10r);
+  
+  z10  = 0.5[z10l,z10r];
+  
+  % the curved stroke from the left arm of the U 
+  
+  filldraw stroke z4e{up}..{left}z12e..{z10-z11}z11e;
+
+  % the flourish itself
+
+  filldraw stroke z9e--z10e;
+  filldraw stroke z10e--z11e;
+  
+  penlabels(1,2,3,4,5,6,7,9,10,11,12);
+
+endchar;
+
+% overturned c with spur; this is a modified version of
+% the code in romanl.mf
+%
+% not sure I'm entirely happy with the spur
+
+cmchar "Overturned c with spur";
+beginchar("c",8u#,asc_height#,0);
+  adjust_fit(0,0);
+  
+  pickup fine.nib;
+  
+  pos2(vair',270);
+  pos4(vair',90);
+  
+  x2 = x4 = 0.5(w-u); 
+  bot y2r = -oo;
+  top y4r = vround(x_height + 1.5oo);
+  
+  pos3(curve,0);
+
+  rt x3r = w - hround max(0.6u,1.35u - 0.5curve);
+  y3 = 0.5x_height;
+
+  pos1(hair,180);
+  pos0(flare,180);
+
+  y1 = x_height -
+    min(bar_height + 0.5flare + 2vair' + 2,
+        0.9[bar_height,x_height] - 0.5flare);
+
+  lft x1r = 0.7u; 
+
+  bulb(2,1,0);
+
+  pos5(hair,180);
+  lft x5r = 0.5u;
+  y5 = x_height - max(good.y(0.5bar_height-0.9),x_height-y4l-vair');
+  (x,y4l) = whatever[z4r,z5l];
+  x4l := min(x,x4l+.5u);
+  
+  filldraw stroke pulled_super_arc.e(2,3)(0.7superpull)
+    & pulled_super_arc.e(3,4)(0.5superpull)
+    ..tension .9 and 1..{x5-x4,5(y5-y4)}z5e;
+  
+  path pth;
+  numeric tp,theta;
+
+  theta = 25;
+  
+  pos6(stem,theta-90);
+  pos7(hair,90+theta);
+  
+  top y6l = asc_height;
+  
+  pth = z4{left}..tension .9 and 1..{x5-x4,5(y5-y4)}z5;
+  
+  z7 = directionpoint dir(180+theta) of pth;
+  x6 = x7;
+    
+  filldraw stroke z7e{dir(theta)}..{dir(180+theta)}z6e;
+  
+  penlabels(0,1,2,3,4,5,6,7);
+
+endchar;
+
+cmchar "Overturned e with spur";
+beginchar("e",7.25u#+max(0.75u#,0.5curve#),asc_height#,0);
+  adjust_fit(0,0);
+
+  numeric left_curve,right_curve,rbar_height;
+
+  rbar_height = x_height - bar_height;
+  
+  left_curve + 6stem_corr = right_curve = curve;
+
+  if right_curve<tiny.breadth: right_curve:=tiny.breadth; fi
+  if left_curve<tiny.breadth: left_curve:=tiny.breadth; fi
+
+  pickup tiny.nib;
+
+  pos1(left_curve,180);
+  pos2(vair,270);
+  pos3(right_curve,0);
+
+  y1 = good.y rbar_height;
+  bot y2r = -oo;
+  y0l = top y1;
+  lft x1r = hround max(0.5u,1.25u-0.5left_curve);
+  rt  x3r = hround min(w-0.5u,w-u+0.5right_curve);
+  x2 = 0.5w-0.25u;
+  
+  {{
+  interim superness := more_super;
+  filldraw stroke super_arc.e(1,2);
+  }};
+
+  y3 = 0.5 [y2,y4];
+  top y4r = x_height + vround 1.5oo;
+  x4 = x2 + 0.25u;
+
+  pos4(vair',90);
+  pos5(hair,180);
+
+  y5 = min(good.y(0.5[rbar_height,x_height]+0.9),y4l-vair);
+
+  x5r = x1r;
+  (x,y4l) = whathever[z4r,z5];
+  x4l := min(x,x4l+0.5u);
+
+  filldraw stroke pulled_arc.e(2,3) & pulled_arc.e(3,4)
+  ... {x5-x4,5(y5-y4)}z5e;
+
+  path testpath;
+
+  testpath = super_arc.r(2,3) & super_arc.r(3,4); 
+
+  y1'r = y0r = y0l - 0.6[thin_join,vair];
+  y1'l = y0l;
+  x1'l = x1'r = x1;
+
+  forsuffixes $ = l,r:
+    x0$ = xpart(((w,y0$)--(x1,y0$)) intersectionpoint testpath);
+  endfor;
+
+  fill stroke z0e--z1'e;
+  
+  path pth;
+  numeric tp,theta;
+
+  theta = 25;
+  
+  pos6(stem,theta-90);
+  pos7(hair,90+theta);
+  
+  top y6l = asc_height;
+  
+  pth =  super_arc.r(3,4) ... {x5-x4,5(y5-y4)}z5;
+  
+  z7 = directionpoint dir(180+theta) of pth;
+  x6 = x7;
+    
+  filldraw stroke z7e{dir(theta)}..{dir(180+theta)}z6e;
+
+  penlabels(0,1,2,3,4,5,6,7);
+  
+endchar;
+
+% Reverse solidus -- in contrast the the cm backslash 
+% this is stressed, an oblique slab of the width of 
+% capital stems. The dimensions also are those of
+% capitals, whearas the cm backslash has the dimensions 
+% of delimiters.
+
+cmchar "Reverse solidus";
+beginchar(oct "113",9u#,cap_height#,0);
+  adjust_fit(0,0);
+
+  pickup fine.nib;
+  
+  pos1(cap_stem,0);
+  pos2(cap_stem,0);
+  
+  lft x1l = u;
+  rt  x2r = w - u;
+  top y1 = cap_height;
+  bot y2 = 0;
+
+  filldraw stroke z1e--z2e;
+
+  penlabels(1,2);
+  
+endchar;
+
+% the left-angle, a funny looking thing, made from a single
+% stroke of an eliptic pen. The upstroke is bowed inward,
+% barely perceptibly
+
+cmchar "Left-angle";
+beginchar(oct "150",11u#,cap_height#,0);
+  adjust_fit(0,0);
+
+  numeric theta,bow,elbow;
+  
+  elbow := x_height + 0.5*(cap_height-x_height);
+
+  x1 = x3 = w - 0.5u - 0.4cap_stem;
+  y1 = 0; cap_height - y3 = 0.4cap_stem;
+  y2 = elbow;
+  x2 = 0.5u + 0.4cap_stem;
+
+  theta := angle(z2-z1)-90;
+  bow   := 5;
+  
+  pickup pencircle xscaled cap_hair yscaled cap_stem rotated theta;
+  draw z1{dir(theta+90-bow)}...{dir(theta+90+bow)}z2--z3;
+
+  penlabels(1,2,3);
+  
+endchar;
+
+cmchar "Variant Infinity";
+beginchar("infty",18u#,x_height#,0); 
+  adjust_fit(0,0);
+  
+  numeric theta,psi;  
+  theta = 70;
+  psi = 40;
+  
+  penrad = hair;
+  
+  y1 = y3 = y4 = y6 = 7/16x_height;
+  x1 = w - x6 = 0.5u + penrad;
+  2x3 = 2x4 = x1 + x6;
+  2x2 = x1 + x3;
+  2x5 = x4 + x6;
+  y2 = y5 = penrad - oo;
+  
+  pickup pencircle scaled 2penrad;
+  
+  draw z1{dir(-theta)}...z2...{dir(theta)}z3;
+  draw z4{dir(-theta)}...z5...{dir(theta)}z6;
+  
+  penlabels(1,2,3,4,5,6);
+  
+  % this is the overbar
+
+  pickup fine.nib;
+  
+  pos7(hair,90+psi);
+  pos8(2penrad,90);
+  pos9(hair,90-psi);
+  
+  x7 = w - x9 = 0.32[x1,x2];
+  y7 = y9 = 11/16x_height;
+  2x8 = x7 + x9;
+  top y8r = o + h; 
+  
+  filldraw stroke z7e{dir psi}...z8e...{dir -psi}z9e;
+  
+  penlabels(7,8,9);
+
+endchar;
+
+% This is series of small cups, caps and bars. Although
+% most of these are binary operators, Pohle sets these
+% much tighter than the other operators in the text, but
+% not quite as tight as ordinary terms.
+% We simulate this behaviour by declaring them \mathord
+% in the style file (rather than \mathbin), but add a liile
+% extra spacing around them with cupcap_fit
+
+def cupcap_fit = adjust_fit(24/36pt#,24/36pt#) enddef;
+
+cmchar "upwards opened bracket";
+beginchar(oct "114",14u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  bot y1 = bot y2 = 0;
+
+  x3 = x1;
+  x4 = x2;
+
+  y3 = y4 = 1/3x_height; 
+  
+  draw z3--z1--z2--z4;
+
+  labels(1,2,3);
+  
+endchar;
+
+cmchar "Small bar acute";
+beginchar(oct "115",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  bot y1 = bot y2 = 0;
+  
+  draw z1--z2;
+
+  labels(1,2);
+  
+  pickup crisp.nib;
+
+  x4 + 0.5stem = hround(2/3w);
+  x5 = 2/3[x4,w-x4];
+  y4 + 0.5stem = x_height + oo;
+  y5 = 1/2x_height;
+
+  numeric theta;
+  theta = angle(z5-z4) + 90;
+  pos4(stem,theta);
+  pos5(hair,theta);
+
+  filldraw circ_stroke z4e--z5e;
+
+  penlabels(4,5);
+  
+endchar;
+
+cmchar "Small cup";
+beginchar(oct "116",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  y1 = y2 = 0.5x_height;
+  x3 = good.x 0.5w;
+  bot y3 = -oo;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+
+endchar;
+
+cmchar "Small bar over cap";
+beginchar(oct "117",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  y1 = y2 = 1/3x_height;
+  x3 = good.x 0.5w;
+  y3 = 2/3x_height;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+
+  x4 = x1;
+  x5 = x2;
+
+  top y4 = top y5 = x_height;
+
+  draw z4--z5;
+
+  labels(4,5);
+
+endchar;
+
+cmchar "Small cup over bar";
+beginchar(oct "120",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  top y1 = top y2 = x_height + oo;
+  x3 = good.x 0.5w;
+  y3 = 2/3x_height;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+
+  x4 = x1;
+  x5 = x2;
+
+  y4 = y5 = 1/3x_height;
+
+  draw z4--z5;
+
+  labels(4,5);
+
+endchar;
+
+cmchar "Small cap over bar";
+beginchar(oct "121",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  y1 = y2 = 2/3x_height;
+  x3 = good.x 0.5w;
+  top y3 = x_height + oo;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+
+  x4 = x1;
+  x5 = x2;
+
+  y4 = y5 = 1/3x_height;
+
+  draw z4--z5;
+
+  labels(4,5);
+
+endchar;
+
+cmchar "Small cup with acute";
+beginchar(oct "122",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  y1 = y2 = 1/3x_height;
+  x3 = good.x 0.5w;
+  bot y3 = -oo;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+  
+  pickup crisp.nib;
+
+  x4 + 0.5stem = hround(2/3w);
+  x5 = 2/3[x4,w-x4];
+  y4 + 0.5stem = x_height + oo;
+  y5 = 1/2x_height;
+
+  numeric theta;
+  theta = angle(z5-z4) + 90;
+  pos4(stem,theta);
+  pos5(hair,theta);
+
+  filldraw circ_stroke z4e--z5e;
+
+  penlabels(4,5);
+
+endchar;
+
+cmchar "Small raised cap";
+beginchar(oct "123",10u#,x_height#,0); 
+  cupcap_fit;
+
+  pickup rule.nib;
+
+  lft x1 = hround(u - eps);
+  x2 = w - x1;
+  y1 = y2 = 0.5x_height;
+  x3 = good.x 0.5w;
+  top y3 = x_height + oo;
+  
+  draw z1..z3..z2;
+
+  labels(1,2,3);
+
+endchar;
+
+end
\ No newline at end of file
diff --git a/Master/texmf-dist/fonts/source/public/fge/fgerm10.mf b/Master/texmf-dist/fonts/source/public/fge/fgerm10.mf
new file mode 100644
index 00000000000..df7a2b99892
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/fge/fgerm10.mf
@@ -0,0 +1,83 @@
+% FGE Roman 10 point
+% this is derived from cmr10.mf by Knuth
+% J.J.Green 2006
+% $Id: fgerm10.mf,v 1.2 2006/11/21 20:56:17 jjg Exp $
+
+if unknown cmbase:  input cmbase fi
+if unknown fgebase: input fgebase fi
+
+font_identifier := "FGERM";
+font_size 10pt#;
+
+u#             := 20/36pt#;    % unit width
+width_adj#     := 0pt#;        % width adjustment for certain characters
+serif_fit#     := 0pt#;        % extra sidebar near lowercase serifs
+cap_serif_fit# := 5/36pt#;     % extra sidebar near uppercase serifs
+letter_fit#    := 0pt#;        % extra space added to all sidebars
+
+body_height#   := 270/36pt#;   % height of tallest characters
+asc_height#    := 250/36pt#;   % height of lowercase ascenders
+cap_height#    := 246/36pt#;   % height of caps
+fig_height#    := 232/36pt#;   % height of numerals
+x_height#      := 155/36pt#;   % height of lowercase without ascenders
+math_axis#     := 90/36pt#;    % axis of symmetry for math symbols
+bar_height#    := 87/36pt#;    % height of crossbar in lowercase e
+comma_depth#   := 70/36pt#;    % depth of comma below baseline
+desc_depth#    := 70/36pt#;    % depth of lowercase descenders
+
+crisp#         := 0pt#;        % diameter of serif corners
+tiny#          := 8/36pt#;     % diameter of rounded corners
+fine#          := 7/36pt#;     % diameter of sharply rounded corners
+thin_join#     := 7/36pt#;     % width of extrafine details
+hair#          := 9/36pt#;     % lowercase hairline breadth
+stem#          := 25/36pt#;    % lowercase stem breadth
+curve#         := 30/36pt#;    % lowercase curve breadth
+ess#           := 27/36pt#;    % breadth in middle of lowercase s
+flare#         := 33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#      := 38/36pt#;    % diameter of dots
+cap_hair#      := 11/36pt#;    % uppercase hairline breadth
+cap_stem#      := 32/36pt#;    % uppercase stem breadth
+cap_curve#     := 37/36pt#;    % uppercase curve breadth
+cap_ess#       := 35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:= 0.4pt#;      % thickness of lines in math symbols
+
+dish#          := 1/36pt#;     % amount erased at top or bottom of serifs
+bracket#       := 20/36pt#;    % vertical distance from serif base to tangent
+jut#           := 28/36pt#;    % protrusion of lowercase serifs
+cap_jut#       := 37/36pt#;    % protrusion of uppercase serifs
+beak_jut#      := 10/36pt#;    % horizontal protrusion of beak serifs
+beak#          := 70/36pt#;    % vertical protrusion of beak serifs
+vair#          := 8/36pt#;     % vertical diameter of hairlines
+notch_cut#     := 10pt#;       % maximum breadth above or below notches
+bar#           := 11/36pt#;    % lowercase bar thickness
+slab#          := 11/36pt#;    % serif and arm thickness
+cap_bar#       := 11/36pt#;    % uppercase bar thickness
+cap_band#      := 11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut# := 10pt#;       % max breadth above/below uppercase notches
+serif_drop#    := 4/36pt#;     % vertical drop of sloped serifs
+stem_corr#     := 1/36pt#;     % for small refinements of stem breadth
+vair_corr#     := 1/36pt#;     % for small refinements of hairline height
+apex_corr#     := 0pt#;        % extra width at diagonal junctions
+
+o#             := 8/36pt#;     % amount of overshoot for curves
+apex_o#        := 8/36pt#;     % amount of overshoot for diagonal junctions
+
+slant          := 0;           % tilt ratio $(\Delta x/\Delta y)$
+fudge          := 1;           % factor applied to weights of heavy characters
+math_spread    := 0;           % extra openness of math symbols
+superness      := 1/sqrt2;     % parameter for superellipses
+superpull      := 1/6;         % extra openness inside bowls
+beak_darkness  := 11/30;       % fraction of triangle inside beak serifs
+ligs           := 2;           % level of ligatures to be included
+
+square_dots    := false;       % should dots be square?
+hefty          := false;       % should we try hard not to be overweight?
+serifs         := true;        % should serifs and bulbs be attached?
+monospace      := false;       % should all characters have the same width?
+variant_g      := false;       % should an italic-style g be used?
+low_asterisk   := false;       % should the asterisk be centered at the axis?
+math_fitting   := true;        % should math-mode spacing be used?
+
+% switch to the driver file
+
+generate fgerm  
diff --git a/Master/texmf-dist/fonts/tfm/public/fge/fgeit10.tfm b/Master/texmf-dist/fonts/tfm/public/fge/fgeit10.tfm
new file mode 100644
index 00000000000..165aac7f2b9
--- /dev/null
+++ b/Master/texmf-dist/fonts/tfm/public/fge/fgeit10.tfm
diff --git a/Master/texmf-dist/fonts/tfm/public/fge/fgerm10.tfm b/Master/texmf-dist/fonts/tfm/public/fge/fgerm10.tfm
new file mode 100644
index 00000000000..2a24bfb8344
--- /dev/null
+++ b/Master/texmf-dist/fonts/tfm/public/fge/fgerm10.tfm
diff --git a/Master/texmf-dist/source/fonts/fge/fge.dtx b/Master/texmf-dist/source/fonts/fge/fge.dtx
new file mode 100644
index 00000000000..36314755589
--- /dev/null
+++ b/Master/texmf-dist/source/fonts/fge/fge.dtx
@@ -0,0 +1,297 @@
+% \iffalse meta-comment
+%
+% Copyright 2006, 2007  J.J. Green
+% $Id: fge.dtx,v 1.52 2007/06/03 16:11:04 jjg Exp $
+% 
+% Changes:
+%
+% \fi
+%
+% \CheckSum{844}
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%
+% \iffalse   % this is a METACOMMENT !
+%
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{fge}
+%<fdrm>\ProvidesFile{fgerm.fd}%
+%<fdit>\ProvidesFile{fgeit.fd}%
+%<-driver>             [2007/06/03 1.21
+%<package>               fge symbol support package]
+%<fdrm>                  fge roman symbol font definitions]
+%<fdit>                  fge italic symbol font definitions]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\OnlyDescription
+\usepackage{multicol}
+\usepackage{fge}
+\providecommand\dst{\expandafter{\normalfont\scshape docstrip}}
+\renewcommand{\quad}{{\hskip1em plus 2em}}
+\begin{document}
+ \DocInput{fge.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{fge.sty}
+% \title{The \texttt{fge} macro package for \LaTeXe}
+% \author{J.J. Green}
+% \date{Version \fileversion{} \filedate}
+% \maketitle
+%
+% \setcounter{StandardModuleDepth}{1}
+%
+% \begin{quote}
+%   \noindent The comfort of the typesetter is certainly not 
+%   the \textit{summum bonum}.
+%
+%   \hfill\textsc{G.~Frege, 1896.} 
+% \end{quote}
+% 
+% \noindent
+% This file defines the package |fge| which provides \LaTeXe\ access
+% to the characters from the \texttt{fge} fonts. These are 
+% based on Knuth's Computer Modern and specifically designed for setting 
+% the \textit{Grundgesetze der Arithmetik}, the culmination of Frege's 
+% logicist project.
+%
+% \begin{multicols}{2}
+%
+% \subsubsection*{Spiritus lenis}
+% The spiritus lenis accent is available as 
+% \begin{quote}
+%   |\spirituslenis{\alpha}|
+% \end{quote}
+% giving $\spirituslenis{\alpha}$, $\spirituslenis{\beta}$,
+% $\spirituslenis{\gamma}$, $\spirituslenis{\delta}$,
+% $\spirituslenis{\varepsilon}$,\ldots 
+%
+% \subsubsection*{Lazy capitals and numerals}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgerighttwo|  & $\fgerighttwo$  \\
+%     |\fgerightB|    & $\fgerightB$  \\
+%     |\fgelefttwo|   & $\fgelefttwo$ \\
+%     |\fgeleftthree| & $\fgeleftthree$ \\
+%     |\fgeleftB|     & $\fgeleftB$ \\
+%     |\fgeleftC|     & $\fgeleftC$
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Overturned romans}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgec|         & $\fgec$ \\
+%     |\fgee|         & $\fgee$ \\
+%     |\fgeeszett|    & $\fgeeszett$ \\
+%     |\fgeA|         & $\fgeA$ 
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Overturned italics}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fged|         & $\fged$ \\
+%     |\fgef|         & $\fgef$ \\
+%     |\fgeF|         & $\fgeF$ \\ 
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Struckout numerals}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgestruckzero| & $\fgestruckzero$ \\
+%     |\fgestruckone|  & $\fgestruckone$
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Fletched arrows}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgerightarrow| & $\fgerightarrow$ \\
+%     |\fgeuparrow|    & $\fgeuparrow$
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Cups, caps and bars}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgeupbracket| & $\fgeupbracket$ \\
+%     |\fgecap| & $\fgecap$ \\
+%     |\fgecup| & $\fgecup$ \\
+%     |\fgecupbar| & $\fgecupbar$ \\
+%     |\fgecapbar| & $\fgecapbar$ \\
+%     |\fgebarcap| & $\fgebarcap$ \\
+%     |\fgecupacute| & $\fgecupacute$ \\
+%     |\fgebaracute| & $\fgebaracute$ 
+%   \end{tabular}
+% \end{quote}
+%
+% \subsubsection*{Erratics}
+% \begin{quote}
+%   \begin{tabular}{lc}
+%     |\fgeU|         & $\fgeU$  \\
+%     |\fgelb|        & $\fgelb$ \\
+%     |\fgeinfty|     & $\fgeinfty$ \\
+%     |\fgelangle|    & $\fgelangle$ \\
+%     |\fges|         & $\fges$ \\
+%     |\fgebackslash| & $\fgebackslash$
+%   \end{tabular}
+% \end{quote}
+%
+% \end{multicols}
+% 
+% \StopEventually{}
+% 
+% \section{The \dst{} modules}
+% 
+% The following modules are used in the implementation to direct
+% \dst{} in generating the external files:
+% \begin{center}
+%   \begin{tabular}{ll}
+%     driver  & produce a documentation driver file \\
+%     package & produce a package file \\
+%     fdrm    & produce a roman font definition file \\
+%     fdit    & produce an italic font definition file \\
+%   \end{tabular}
+% \end{center}
+% 
+% \section{The Implementation}
+% \subsection{The macro package}
+% 
+%<*package>
+% Setup the |crescent| option, which selects the crescent
+% variant of the spiritus lenis. 
+\newif\ifcrescent 
+\crescentfalse
+\DeclareOption{crescent}{\global\crescenttrue}
+\ProcessOptions\relax
+% We declare \texttt{fgerm} and \texttt{fgeit} math symbol fonts:
+%    \begin{macrocode}
+\DeclareSymbolFont{fgerm}{U}{fgerm}{m}{n}
+\DeclareSymbolFont{fgeit}{U}{fgeit}{m}{n}
+%    \end{macrocode}
+% 
+% The special symbols:
+%    \begin{macrocode}
+\DeclareMathSymbol{\fgelb}{\mathord}{fgeit}{"11}
+\DeclareMathSymbol{\fgeF}{\mathbin}{fgeit}{"46}
+\DeclareMathSymbol{\fgevareta}{\mathord}{fgerm}{"11}
+\DeclareMathSymbol{\fgeeszett}{\mathbin}{fgerm}{"19}
+\DeclareMathSymbol{\fgerightarrow}{\mathrel}{fgerm}{"21}
+\DeclareMathSymbol{\fgeuparrow}{\mathrel}{fgerm}{"22}
+\DeclareMathSymbol{\fgestruckzero}{\mathord}{fgerm}{"30}
+\DeclareMathSymbol{\fgestruckone}{\mathord}{fgerm}{"31}
+\DeclareMathSymbol{\fgelefttwo}{\mathbin}{fgerm}{"32}
+\DeclareMathSymbol{\fgeleftthree}{\mathbin}{fgerm}{"33}
+\DeclareMathSymbol{\fgerighttwo}{\mathbin}{fgerm}{"34}
+\DeclareMathSymbol{\fgeA}{\mathord}{fgerm}{"41}
+\DeclareMathSymbol{\fgerightB}{\mathbin}{fgerm}{"42}
+\DeclareMathSymbol{\fgeleftC}{\mathbin}{fgerm}{"43}
+\DeclareMathSymbol{\fgeleftB}{\mathbin}{fgerm}{"44}
+\DeclareMathSymbol{\fgebackslash}{\mathord}{fgerm}{"4B}
+\DeclareMathSymbol{\fgeupbracket}{\mathord}{fgerm}{"4C}
+\DeclareMathSymbol{\fgebaracute}{\mathord}{fgerm}{"4D}
+\DeclareMathSymbol{\fgecup}{\mathord}{fgerm}{"4E}
+\DeclareMathSymbol{\fgebarcap}{\mathord}{fgerm}{"4F}
+\DeclareMathSymbol{\fgecupbar}{\mathord}{fgerm}{"50}
+\DeclareMathSymbol{\fgecapbar}{\mathord}{fgerm}{"51}
+\DeclareMathSymbol{\fgecupacute}{\mathord}{fgerm}{"52}
+\DeclareMathSymbol{\fgecap}{\mathord}{fgerm}{"53}
+\DeclareMathSymbol{\fgeU}{\mathord}{fgerm}{"55}
+\DeclareMathSymbol{\fgec}{\mathbin}{fgerm}{"63}
+\DeclareMathSymbol{\fgee}{\mathbin}{fgerm}{"65}
+\DeclareMathSymbol{\fgef}{\mathord}{fgeit}{"66}
+\DeclareMathSymbol{\fgelangle}{\mathbin}{fgerm}{"68}
+\DeclareMathSymbol{\fgeinfty}{\mathord}{fgerm}{"69}
+\DeclareMathSymbol{\fged}{\mathord}{fgeit}{"70}
+\DeclareMathSymbol{\fges}{\mathbin}{fgerm}{"73}
+%    \end{macrocode}
+% This included for backward compatibility with versions
+% prior to 1.17, it was only then that I discovered that
+% what I first thought was an N, then an eta, then an 
+% overturned U, was in fact an overturned lb (pound) 
+% ligature. 
+%    \begin{macrocode}
+\newcommand{\fgeeta}{\fgelb}
+\newcommand{\fgeN}{\fgelb}
+\newcommand{\fgeoverU}{\fgelb}
+%    \end{macrocode}
+% The spiritus lenis accent. Here we don't use \texttt{DeclareMathAccent}
+% but instead \TeX\ primatives; the former is for ordinary symbols 
+% which are press-ganged into being accents, the latter is for glyphs
+% designed as accents. The tricky part is selecting the \textt{fge} font
+% by coercing its symbol-code into an appropriate hex-string, we copy
+% the code in the AMS fonts package.
+%    \begin{macrocode}
+\def\spirituslenisA{\mathaccent"0\hexnumber@\symfgerm 15}
+\def\spirituslenisB{\mathaccent"0\hexnumber@\symfgerm 16}
+%    \end{macrocode}
+% There are two versions of the spiritus lenis, variant A
+% from the Ibycus font for classical Greek by
+% Pierre A. MacKay, from work by Silvio Levy's realization of a
+% classic Didot cut of Greek type from around 1800.
+% Variant B is my own, an approximation of the more crescent-like
+% accent used in the original printing. Variant A is the default,
+% since it is prettier; but the translators have asked me to retain
+% the crescent form.
+%    \begin{macrocode}
+\ifcrescent
+  \def\spirituslenis{\spirituslenisB}
+\else
+  \def\spirituslenis{\spirituslenisA}
+\fi
+%    \end{macrocode}
+% The character sizing
+%    \begin{macrocode}
+\DeclareMathSizes{10}{10}{7}{5}
+%    \end{macrocode}
+%</package>
+%    \end{macrocode}
+% \subsection{The font definition files}
+% 
+% The declarations, 
+% that have to go into the corresponding |.fd| files:
+%<*fdrm>
+%    \begin{macrocode}
+\DeclareFontFamily{U}{fgerm}{}
+\DeclareFontShape{U}{fgerm}{m}{n}{%
+  <5><6><7> fgerm10
+  <8><9><10> fgerm10
+  <10.95><12><14.4><17.28> fgerm10}{}
+%    \end{macrocode}
+%</fdrm>
+%<*fdit>
+%    \begin{macrocode}
+\DeclareFontFamily{U}{fgeit}{}
+\DeclareFontShape{U}{fgeit}{m}{n}{%
+  <5><6><7> fgeit10
+  <8><9><10> fgeit10
+  <10.95><12><14.4><17.28> fgeit10}{}
+%    \end{macrocode}
+%</fdit>
+% 
+% The next line goes into all files and in addition prevents \dst{}
+% from adding any further code from the main source file (such as a
+% character table).
+%    \begin{macrocode}
+\endinput
+%    \end{macrocode}
+% 
+% \DeleteShortVerb{\|}
+% \Finale
diff --git a/Master/texmf-dist/source/fonts/fge/fge.ins b/Master/texmf-dist/source/fonts/fge/fge.ins
new file mode 100644
index 00000000000..d957c0a678b
--- /dev/null
+++ b/Master/texmf-dist/source/fonts/fge/fge.ins
@@ -0,0 +1,16 @@
+% -*- tex -*-
+% fge.ins
+% docstrip wrapper for fge
+% J.J. Green 2005 
+% $Id: fge.ins,v 1.4 2007/01/02 23:27:38 jjg Exp $
+\def\batchfile{fge.ins}
+\input docstrip.tex
+\preamble
+docstrip wrapper for fge
+\endpreamble
+\keepsilent
+\generateFile{fge.sty}{t}{\from{fge.dtx}{package}}
+\generateFile{Ufgerm.fd}{t}{\from{fge.dtx}{fdrm}}
+\generateFile{Ufgeit.fd}{t}{\from{fge.dtx}{fdit}}
+\endinput
+
diff --git a/Master/texmf-dist/tex/latex/fge/Ufgeit.fd b/Master/texmf-dist/tex/latex/fge/Ufgeit.fd
new file mode 100644
index 00000000000..5c26fd6b7e4
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/fge/Ufgeit.fd
@@ -0,0 +1,34 @@
+%%
+%% This is file `Ufgeit.fd',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% fge.dtx  (with options: `fdit')
+%% docstrip wrapper for fge
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+\ProvidesFile{fgeit.fd}%
+             [2007/06/03 1.21
+                  fge italic symbol font definitions]
+\DeclareFontFamily{U}{fgeit}{}
+\DeclareFontShape{U}{fgeit}{m}{n}{%
+  <5><6><7> fgeit10
+  <8><9><10> fgeit10
+  <10.95><12><14.4><17.28> fgeit10}{}
+\endinput
+%%
+%% End of file `Ufgeit.fd'.
diff --git a/Master/texmf-dist/tex/latex/fge/Ufgerm.fd b/Master/texmf-dist/tex/latex/fge/Ufgerm.fd
new file mode 100644
index 00000000000..757a41fe4e2
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/fge/Ufgerm.fd
@@ -0,0 +1,34 @@
+%%
+%% This is file `Ufgerm.fd',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% fge.dtx  (with options: `fdrm')
+%% docstrip wrapper for fge
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+\ProvidesFile{fgerm.fd}%
+             [2007/06/03 1.21
+                  fge roman symbol font definitions]
+\DeclareFontFamily{U}{fgerm}{}
+\DeclareFontShape{U}{fgerm}{m}{n}{%
+  <5><6><7> fgerm10
+  <8><9><10> fgerm10
+  <10.95><12><14.4><17.28> fgerm10}{}
+\endinput
+%%
+%% End of file `Ufgerm.fd'.
diff --git a/Master/texmf-dist/tex/latex/fge/fge.sty b/Master/texmf-dist/tex/latex/fge/fge.sty
new file mode 100644
index 00000000000..014cdfff227
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/fge/fge.sty
@@ -0,0 +1,79 @@
+%%
+%% This is file `fge.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% fge.dtx  (with options: `package')
+%% docstrip wrapper for fge
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{fge}
+             [2007/06/03 1.21
+               fge symbol support package]
+\newif\ifcrescent
+\crescentfalse
+\DeclareOption{crescent}{\global\crescenttrue}
+\ProcessOptions\relax
+\DeclareSymbolFont{fgerm}{U}{fgerm}{m}{n}
+\DeclareSymbolFont{fgeit}{U}{fgeit}{m}{n}
+\DeclareMathSymbol{\fgelb}{\mathord}{fgeit}{"11}
+\DeclareMathSymbol{\fgeF}{\mathbin}{fgeit}{"46}
+\DeclareMathSymbol{\fgevareta}{\mathord}{fgerm}{"11}
+\DeclareMathSymbol{\fgeeszett}{\mathbin}{fgerm}{"19}
+\DeclareMathSymbol{\fgerightarrow}{\mathrel}{fgerm}{"21}
+\DeclareMathSymbol{\fgeuparrow}{\mathrel}{fgerm}{"22}
+\DeclareMathSymbol{\fgestruckzero}{\mathord}{fgerm}{"30}
+\DeclareMathSymbol{\fgestruckone}{\mathord}{fgerm}{"31}
+\DeclareMathSymbol{\fgelefttwo}{\mathbin}{fgerm}{"32}
+\DeclareMathSymbol{\fgeleftthree}{\mathbin}{fgerm}{"33}
+\DeclareMathSymbol{\fgerighttwo}{\mathbin}{fgerm}{"34}
+\DeclareMathSymbol{\fgeA}{\mathord}{fgerm}{"41}
+\DeclareMathSymbol{\fgerightB}{\mathbin}{fgerm}{"42}
+\DeclareMathSymbol{\fgeleftC}{\mathbin}{fgerm}{"43}
+\DeclareMathSymbol{\fgeleftB}{\mathbin}{fgerm}{"44}
+\DeclareMathSymbol{\fgebackslash}{\mathord}{fgerm}{"4B}
+\DeclareMathSymbol{\fgeupbracket}{\mathord}{fgerm}{"4C}
+\DeclareMathSymbol{\fgebaracute}{\mathord}{fgerm}{"4D}
+\DeclareMathSymbol{\fgecup}{\mathord}{fgerm}{"4E}
+\DeclareMathSymbol{\fgebarcap}{\mathord}{fgerm}{"4F}
+\DeclareMathSymbol{\fgecupbar}{\mathord}{fgerm}{"50}
+\DeclareMathSymbol{\fgecapbar}{\mathord}{fgerm}{"51}
+\DeclareMathSymbol{\fgecupacute}{\mathord}{fgerm}{"52}
+\DeclareMathSymbol{\fgecap}{\mathord}{fgerm}{"53}
+\DeclareMathSymbol{\fgeU}{\mathord}{fgerm}{"55}
+\DeclareMathSymbol{\fgec}{\mathbin}{fgerm}{"63}
+\DeclareMathSymbol{\fgee}{\mathbin}{fgerm}{"65}
+\DeclareMathSymbol{\fgef}{\mathord}{fgeit}{"66}
+\DeclareMathSymbol{\fgelangle}{\mathbin}{fgerm}{"68}
+\DeclareMathSymbol{\fgeinfty}{\mathord}{fgerm}{"69}
+\DeclareMathSymbol{\fged}{\mathord}{fgeit}{"70}
+\DeclareMathSymbol{\fges}{\mathbin}{fgerm}{"73}
+\newcommand{\fgeeta}{\fgelb}
+\newcommand{\fgeN}{\fgelb}
+\newcommand{\fgeoverU}{\fgelb}
+\def\spirituslenisA{\mathaccent"0\hexnumber@\symfgerm 15}
+\def\spirituslenisB{\mathaccent"0\hexnumber@\symfgerm 16}
+\ifcrescent
+  \def\spirituslenis{\spirituslenisB}
+\else
+  \def\spirituslenis{\spirituslenisA}
+\fi
+\DeclareMathSizes{10}{10}{7}{5}
+\endinput
+%%
+%% End of file `fge.sty'.