new latex pkg cutwin (4oct10)

git-svn-id: svn://tug.org/texlive/trunk@20000 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 1486 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/cutwin/README b/Master/texmf-dist/doc/latex/cutwin/README
new file mode 100644
index 00000000000..1a9a435fddd
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/cutwin/README
@@ -0,0 +1,60 @@
+    The cutwin package enables you to create a window in a paragraph.
+Facilities are provided to assist in putting text or a logo into the
+space cutout.
+
+    IF THERE ARE ANY QUESTIONS PLEASE ASK THEM ON THE COMP.TEXT.TEX NEWSGROUP
+AS I AM AWAY MORE OFTEN THAN NOT.
+
+
+Changes in version 0.1 (2010/09/29)
+o First public release
+
+------------------------------------------------------------------
+  Author: Peter Wilson (Herries Press) herries dot press at earthlink dot net
+          and Alan Hoenig
+  Copyright 2010 Peter R. Wilson
+
+  This work may be distributed and/or modified under the
+  conditions of the Latex Project Public License, either
+  version 1.3 of this license or (at your option) any
+  later version.
+  The latest version of the license is in
+    http://www.latex-project.org/lppl.txt
+  and version 1.3 or later is part of all distributions of
+  LaTeX version 2003/06/01 or later.
+
+  This work has the LPPL maintenance status "author-maintained".
+
+  This work consists of the files:
+    README (this file)
+    cutwin.dtx
+    cutwin.ins
+    cutwin.pdf
+  and the derived files
+    cutwin.sty
+
+------------------------------------------------------------------
+     The distribution consists of the following files:
+README (this file)
+cutwin.dtx
+cutwin.ins
+cutwin.pdf
+
+
+    To install the package:
+o run: latex cutwin.ins (which will generate cutwin.sty)
+o Move cutwin.sty to a location where LaTeX will find it,
+  for example /usr/TeX/texmf-local/tex/latex/cutwin/cutwin.sty
+  (for more information on installation see the FAQ).
+
+    To generate a second copy of the manual (which is already supplied as a PDF file):
+o run: (pdf)latex cutwin.dtx
+o (for an index run: makeindex -s gind.ist cutwin.idx)
+o run: (pdf)latex cutwin.dtx
+o Print cutwin.dvi (or cutwin.pdf) for a hardcopy of the package manual
+
+2010/09/29
+Peter Wilson
+herries dot press at earthlink dot net
+
+ 
diff --git a/Master/texmf-dist/doc/latex/cutwin/cutwin.pdf b/Master/texmf-dist/doc/latex/cutwin/cutwin.pdf
new file mode 100644
index 00000000000..c4f3de9cb92
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/cutwin/cutwin.pdf
diff --git a/Master/texmf-dist/source/latex/cutwin/cutwin.dtx b/Master/texmf-dist/source/latex/cutwin/cutwin.dtx
new file mode 100755
index 00000000000..e04aca02c8b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cutwin/cutwin.dtx
@@ -0,0 +1,1019 @@
+%% \iffalse meta-comment
+%
+% cutwin.dtx
+% Author: Peter Wilson, Herries Press (herries dot press at earthlink dot net)
+%         and Alan Hoenig
+% Copyright 2010 Peter R. Wilson
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.3 of this license or (at your option) any 
+% later version.
+% The latest version of the license is in
+%    http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of
+% LaTeX version 2003/06/01 or later.
+%
+% This work has the LPPL maintenance status "author-maintained".
+%
+% This work consists of the files listed in the README file.
+%
+%<*driver>
+\documentclass[twoside]{ltxdoc}
+\usepackage{alltt}
+\usepackage{cutwin}
+%\usepackage[draft=false,
+%            plainpages=false,
+%            pdfpagelabels,
+%            bookmarksnumbered,
+%            hyperindex=false
+%           ]{hyperref}
+\providecommand{\phantomsection}
+\show\makeatletter
+\makeatletter
+  \@mparswitchfalse
+\makeatother
+\renewcommand{\MakeUppercase}[1]{#1}
+\pagestyle{headings}
+\EnableCrossrefs
+\CodelineIndex
+%%\OnlyDescription
+\setcounter{StandardModuleDepth}{1}
+\begin{document}
+  \raggedbottom
+  \DocInput{cutwin.dtx}
+\end{document}
+%</driver>
+%
+% \fi
+%
+% \CheckSum{720}
+%
+% \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
+% \DoNotIndex{\@centercr,\@cite}
+% \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
+% \DoNotIndex{\@input,\@ixpt,\@m}
+% \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
+% \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
+% \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
+% \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
+% \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
+% \DoNotIndex{\advance,\Alph,\alph}
+% \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
+% \DoNotIndex{\bullet}
+% \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
+% \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
+% \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
+% \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
+% \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
+% \DoNotIndex{\fbox}
+% \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
+% \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
+% \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
+% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
+% \DoNotIndex{\input}
+% \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
+% \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
+% \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
+% \DoNotIndex{\NeedsTeXFormat,\newdimen}
+% \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
+% \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
+% \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
+% \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
+% \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
+% \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
+% \DoNotIndex{\rightmarnnnnnnngin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
+% \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
+% \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
+% \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
+% \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
+% \DoNotIndex{\viipt,\vipt,\vskip,\vspace}
+% \DoNotIndex{\wd,\xiipt,\year,\z@}
+%
+% \changes{v0.1}{2010/09/29}{First public release}
+%
+% \def\dtxfile{cutwin.dtx}
+% \def\fileversion{v0.1} \def\filedate{2010/09/29}
+% \newcommand*{\Lpack}[1]{\textsf {#1}}           ^^A typeset a package
+% \newcommand*{\Lopt}[1]{\textsf {#1}}            ^^A typeset an option
+% \newcommand*{\file}[1]{\texttt {#1}}            ^^A typeset a file
+% \newcommand*{\Lcount}[1]{\textsl {\small#1}}    ^^A typeset a counter
+% \newcommand*{\pstyle}[1]{\textsl {#1}}          ^^A typeset a pagestyle
+% \newcommand*{\Lenv}[1]{\texttt {#1}}            ^^A typeset an environment
+% \newcommand*{\ablankline}{\vspace{\baselineskip}}
+%
+% \title{Making cutouts in paragraphs\thanks{This
+%        file (\texttt{\dtxfile}) has version number \fileversion, last revised
+%        \filedate.}}
+%
+% \author{%
+% Peter Wilson\thanks{Herries Press, \texttt{herries dot press at earthlink dot net}}
+% and Alan Hoenig 
+% }
+% \date{\filedate}
+% \maketitle
+% \begin{abstract}
+%    The \Lpack{cutwin} package helps in making a cutout window in the middle
+% of a paragraph.
+%
+% \end{abstract}
+% \tableofcontents
+%
+% 
+%
+% \section{Introduction}
+%
+%  ^^A  Based on Alan Hoenig, `TeX Does Windows --- The Conclusion',
+%  ^^A              TUGboat, 8, 2 pp211-215, 1987
+%
+%
+% This manual is typeset according to the conventions of the
+% \LaTeX{} \textsc{docstrip} utility which enables the automatic
+% extraction of the \LaTeX{} macro source files~\cite{COMPANION}.
+%
+%    Section~\ref{sec:usc} describes the usage of the \Lpack{cutwin} 
+% package and 
+% commented source code is in Section~\ref{sec:code}.
+%
+% \section{The \Lpack{cutwin} package} \label{sec:usc}
+%
+% The code provided by the \Lpack{cutwin} package is meant to help
+% in creating windows, or cutouts, in a text-only paragraph. It is
+% based on code originally published by Alan Hoenig~\cite{HOENIG87}.
+%
+% \subsection{General}
+%
+% \DescribeMacro{\opencutleft}
+% \DescribeMacro{\opencutright}
+% \DescribeMacro{\opencutcenter}
+% Declarations specifying where a window is to be placed. The choices
+% are: \cs{opencutleft} open into the left margin, \cs{opencutright}
+% open into the right margin, and \cs{opencutcenter}, which is the default,
+% open in the `center' of the text, i.e, have text on both sides of the
+% window.
+%
+% \DescribeMacro{\cutfuzz}
+%   This is provided as a convenience to reduce the number of overfull
+% and underfull warnings. Its default definition is:
+% \begin{verbatim}
+% \newcommand{\cutfuzz}{%
+%   \vbadness=50000
+%   \hbadness=50000
+%   \sloppy}
+% \end{verbatim}
+% and it is only applied to the paragraph being windowed.
+%
+% \subsection{Rectangular cutouts}
+%
+% \newcommand*{\tinwin}{%
+%  \centering\bfseries
+%  Text \\ in \\Window \par}
+% \newcommand*{\qinwin}{%
+%   \centering\bfseries\Huge ?\, 
+%   \par}
+% \let\windowpagestuff\tinwin
+% \begin{cutout}{2}{0.2\textwidth}{0.4\textwidth}{3}
+% A rectangular space can be placed in a paragraph with the text flowing
+% across the gap. The space may break open into the top or side of the
+% paragraph or, with some care, into the bottom (the number of lines
+% specified for the cutout should not exceed the amount of text
+% available for those lines). Some text or a logo or
+% graphic may be placed within the window, or it may be left empty.
+% In this instance I have put three short bold text lines in the window
+% opening. The window should not be too wide as it can be difficult
+% to track the exterior text lines across the gap.
+% \end{cutout}
+%
+% \DescribeEnv{cutout}
+% The |cutout| environment, the body of which must be a single paragraph,
+% enables a rectangular window to be cut out of the paragraph with the 
+% text flowing across the cutout. Use as:\\
+% \verb?\begin{cutout}?\marg{numtop}\marg{leftwidth}\marg{rightwidth}\marg{numcut} \\
+% where \meta{numtop} is the number of full lines above the window
+% and \meta{numcut} is the number of lines to be cut (giving the height 
+% of the window).
+% The meaning of the lengths \meta{leftwidth} and \meta{rightwidth} depend
+% on the location of the cutout:
+% \begin{itemize}
+% \item for a centered cutout \meta{leftwidth} and \meta{rightwidth} are the 
+% lengths of the text lines at the left and right sides of the window;
+% \item for an open left cutout \meta{leftwidth} is ignored and 
+% \meta{rightwidth} is the length of the lines to the right of the cutout; and
+% \item for an open right cutout \meta{rightwidth} is ignored and
+% \meta{leftwidth} is the length of the lines at the left of the cutout.
+% \end{itemize}
+%
+%
+% \DescribeMacro{\pageinwindow}
+% \DescribeMacro{\windowpagestuff}
+% The macro \cs{pageinwindow} puts a zero-sized |picture| positioned
+% at the left of the window aligned with the first line of the window (i.e,
+% at the top left of the cutout).
+% The |picture| consists of a |minipage| sized to fit the window.
+% The contents of the minipage is \cs{windowpagestuff}. These two
+% macros may be used to put a graphic or text into the windowed area.
+%
+%    The default definition of \cs{windowpagestuff} is: \\
+% \verb?\newcommand*{\windowpagestuff}{}? \\
+% and you can change it as you wish. For instance, I used the following
+% to put some text centrally within the above cutout.
+% \begin{verbatim}
+% \renewcommand*{\windowpagestuff}{%
+%   \centering\bfseries
+%   Text \\ in \\ Window \par}
+% \end{verbatim}
+% You may well need to experiment to get everything adjusted to your
+% satisfaction.
+%
+% \subsection{Shaped cutouts}
+% 
+% \newcommand*{\mycut}{%
+%   0.1\textwidth, 0.3\textwidth,
+%   0.2\textwidth, 0.4\textwidth,
+%   0.3\textwidth, 0.5\textwidth}
+% \renewcommand*{\putstuffinpic}{%
+%   \put(0,-8){\makebox(0,0){\Huge\bfseries \$}}}
+%
+% \begin{shapedcutout}{2}{3}{\mycut}
+%     A \emph{shaped cutout} is one where the shape of the window is
+% specified by the user who has to supply the length of the text lines
+% bordering the cutout. Normally there is text on either side of the
+% window but it could be open at either the left or right side of
+% the paragraph. It is possible to put a logo or some text in the
+% window. In this paragraph with a shaped cutout I have used a large 
+% \$ sign as a simple logo.
+% \end{shapedcutout}
+%
+%
+% \DescribeEnv{shapedcutout}
+% The |shapedcutout| environment, the body of which must be a single paragraph,
+% enables an arbitrary shaped window to be cut out of the paragraph with the 
+% text flowing across the cutout. Use as:\\
+% \verb?\begin{shapedcutout}?\marg{numtop}\marg{numcut}\marg{shapespec}
+% where \meta{numtop} is the number of full lines above the window,
+% \meta{numcut} is the number of lines to be cut (giving the height of 
+% the window) and
+% \meta{shapespec} is the specification of the length of the lines
+% bordering the cutout.
+%
+%    More precisely \meta{shapespec} is a comma-separated list of the 
+% lengths of the 
+% text lines bordering the window.
+% \begin{itemize}
+% \item For a centered cutout one pair of entries are required for each cut 
+% line denoting the length of the left and right part of the cut line.
+% There must be exactly \meta{numcut} pairs.
+% \item
+% For example you might do something along the lines of:
+% \begin{verbatim}
+% \newcommand*{\mycut}{%
+%   0.1\textwidth, 0.3\textwidth,
+%   0.2\textwidth, 0.4\textwidth,
+%   0.3\textwidth, 0.5\textwidth}
+% \begin{shapedcutout}{2}{3}{\mycut}
+% ...
+% \end{verbatim}
+% which is what I used to create the shaped cutout above.
+% \item For an open cutout each entry is the text length of a line. There must
+% be exactly \meta{numcut} entries. For instance, given the above definition
+% of \cs{mycut} then a call out for an open window would be like: \\
+% \verb?\begin{shapedcutout}{2}{6}{\mycut}?
+% \end{itemize}
+%
+% \DescribeMacro{\picinwindow}
+% In a shaped cutout the macro \cs{picinwindow} is placed at the center
+% of the gap in the first line of the
+% cutout. The default \cs{picinwindow} is a zero-sized picture whose contents
+% is \cs{putstuffinpic}.
+% 
+%    \cs{picinwindow} and \cs{putstuffinpic} are initially defined as
+% \begin{verbatim}
+% \newcommand*{\picinwindow}{%
+%   \begin{picture}(0,0)
+%     \putstuffinpic
+%   \end{picture}}
+% \newcommand*{\putstuffinpic}{}
+% \end{verbatim}  
+%    
+%    You can change \cs{putstuffinpic} to place what you want in the picture.
+% For example, to put the large \$ symbol in the shaped cutout paragraph above
+% I used:
+% \begin{verbatim}
+% \renewcommand*{\putstuffinpic}{%
+%   \put(0,-8){\makebox(0,0){\Huge\bfseries \$}}}
+% \end{verbatim}
+% You have to adjust the placement to suit your purposes and the shape of
+% the cutout.
+%
+% \StopEventually{
+% \bibliographystyle{alpha}
+% \begin{thebibliography}{GMS04}
+% \bibitem[GM04]{COMPANION}
+% Frank Mittelbach and Michel Goossens.
+% \newblock \emph{The LaTeX Companion}. Second edition.
+% \newblock Addison-Wesley Publishing Company, 2004.
+% \bibitem[Hoe87]{HOENIG87}
+% Alan Hoenig.
+% \newblock TeX does windows --- The conclusion,
+% \newblock \emph{TUGboat}, vol 8, no 2, pp 211--215, 1987.
+% \end{thebibliography}
+% }
+%
+%
+% \clearpage
+% \section{The package code} \label{sec:code}
+%
+%    To try and avoid name clashes, all the internal commands include
+% the string |c@tw|.
+%
+% \subsection{Preliminaries}
+%
+%    Announce the name and version of the package, which requires
+% \LaTeXe.
+%    \begin{macrocode}
+%<*pkg>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{cutwin}[2010/09/29 v0.1 cutout windows]
+
+%    \end{macrocode}
+%
+%
+% \subsection{General}
+%
+% \begin{macro}{\c@twwinlines}
+% \begin{macro}{\c@twtoplines}
+% \begin{macro}{\c@twcnt}
+% We need lots of variables. First some counts.
+%    \begin{macrocode}
+\newcount\c@twwinlines % window lines
+\newcount\c@twtoplines % top lines
+\newcount\c@twcnt      % a count
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twlftside}
+% \begin{macro}{\c@twrtside}
+% \begin{macro}{\c@twtopht}
+% \begin{macro}{\c@twvsilg}
+% And some lengths.
+%    \begin{macrocode}
+\newdimen\c@twlftside  % left width
+\newdimen\c@twrtside   % right width
+\newdimen\c@twtopht    % height of top text
+\newdimen\c@twvsilg    % Vertical Shift or InterLine Glue
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twtoka}
+% \begin{macro}{\c@twtokb}
+% And some tokens.
+%    \begin{macrocode}
+\newtoks\c@twtoka      % build of parshape spec
+\newtoks\c@twtokb      % build of parshape spec
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twrawtext}
+% \begin{macro}{\c@twholdwin}
+% \begin{macro}{\c@twwindow}
+% \begin{macro}{\c@twfinaltext}
+% \begin{macro}{\c@twslicea}
+% \begin{macro}{\c@twsliceb}
+% And some boxes.
+%    \begin{macrocode}
+\newbox\c@twrawtext    % text as input
+\newbox\c@twholdwin    % text for window sides
+\newbox\c@twwindow     % composed window
+\newbox\c@twfinaltext  % final assembled cutout paragraph
+\newbox\c@twslicea     % slice A of window text
+\newbox\c@twsliceb     % slice B of window text
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\opencutleft}
+% \begin{macro}{\opencutright}
+% \begin{macro}{\opencutcenter}
+% \begin{macro}{\c@twl@c}
+% User commands for positioning a cutout; left, right, or center.
+% The default is \cs{opencutcenter}.
+% \cs{c@twl@c} is the internal representation.
+%    \begin{macrocode}
+\newcommand*{\opencutleft}{\def\c@twl@c{-1}}
+\newcommand*{\opencutright}{\def\c@twl@c{1}}
+\newcommand*{\opencutcenter}{\def\c@twl@c{0}}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\opencutcenter
+
+%    \end{macrocode}
+%
+% \begin{macro}{\cutfuzz}
+%  An attempt to stop TeX moaning about over/under full h/v boxes.
+%    \begin{macrocode}
+\newcommand{\cutfuzz}{\vbadness=50000 
+   \hbadness=50000
+%   \hfuzz=1pt
+  \sloppy}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@twcalcilg}
+% Calculate the interline glue.
+%    \begin{macrocode}
+\newcommand*{\c@twcalcilg}{%
+  \c@twvsilg=\baselineskip
+  \setbox0=\hbox{(} 
+  \advance\c@twvsilg-\ht0 \advance\c@twvsilg-\dp0}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Rectangular cutouts}
+%
+% \begin{macro}{\pageinwindow}
+% \begin{macro}{\windowpagestuff}
+% User modifiable macros for putting (\cs{pageinwindow}), via a
+% zero-sized picture, 
+% stuff (\cs{windowpagestuff}) in a cutout window.
+%    \begin{macrocode}
+\newcommand*{\pageinwindow}{%
+  \@tempdimc=\c@twwinlines\baselineskip % cutout height
+  \@tempdimb=\hsize
+  \ifnum\c@twl@c=\m@ne % openleft
+    \advance\@tempdimb -\c@twrtside
+  \else
+    \ifnum\c@twl@c=\@ne % openright
+      \advance\@tempdimb -\c@twlftside
+    \else% center
+      \advance\@tempdimb - \c@twlftside
+      \advance\@tempdimb - \c@twrtside
+    \fi
+  \fi
+  \begin{picture}(0,0)%
+    \put(0,0){%
+      \raisebox{4pt}{%
+%\fbox{%
+        \begin{minipage}[t][\@tempdimc][c]{\@tempdimb}
+          \windowpagestuff
+        \end{minipage}
+%}% end fbox
+      }% end raisebox
+    }% end put
+  \end{picture}}
+\newcommand*{\windowpagestuff}{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{environment}{cutout}
+% The environment for cutting a rectangular window from a paragraph.
+%
+% \verb?\begin{cutout}?\marg{numtop}\marg{leftwidth}\marg{rightwidth}\marg{numcut} \\
+% where \meta{numtop} is the number of full lines above the window,
+% \meta{leftwidth} and \meta{rightwidth} are the widths of the text
+% at the sides of the window, 
+% and \meta{numcut} is the number of lines to be cut (giving the height 
+% of the window).
+%
+%    The basic method is to split the paragraph into three parts (a)
+% the top lines above the window, (b) the window lines and (c) the rest 
+% (which will be below the window).  \cs{parshape} is used to do the 
+% splitting. The top lines are left at their natural length, each line
+% crossing the window is treated as a pair of short lines, and the rest
+% are left at their natural length.
+%
+%    The top lines are put into one box, the windowed ones into another
+% and then there are the remainder. When being boxed, the window lines
+% are combined pairwise to make single lines with space in the middle.
+% Finally, the boxes are output.
+%    \begin{macrocode}
+\newenvironment{cutout}[4]{%
+  \cutfuzz
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#4\relax
+  \c@twlftside=#2\relax
+  \c@twrtside=#3\relax
+  \c@twtoka={}%
+%    \end{macrocode}
+% Generate the \cs{parshape} specification.
+%    \begin{macrocode}
+  \c@twmakeparspec
+%    \end{macrocode}
+% Reset the arguments and calculate a vertical shift.
+%    \begin{macrocode}
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#4\relax
+  \c@twcalcshift \vskip-\c@twvsilg
+%    \end{macrocode}
+% Open the \cs{c@twrawtext} box, call the \cs{parshape} and start 
+% collecting the text to be windowed.
+%    \begin{macrocode}
+  \setbox\c@twrawtext=\vbox\bgroup
+  \parshape=\c@twcnt \the\c@twtoka}%
+%    \end{macrocode}
+% Now the code for the actions at \verb?\end{cutout}?, which starts by ending
+% the \cs{c@rawtext} box, resetting \cs{parshape} and calculating
+% the interline glue.
+%    \begin{macrocode}
+  {\egroup% end \box\c@twrawtext
+  \parshape=0 % reset parshape; 
+  \c@twcalcilg % find ILG using current font
+%    \end{macrocode}
+% If there are lines above the window, split them off from \cs{c@twrawtext}
+% into \cs{c@twfinaltext}.
+%    \begin{macrocode}    
+  \ifnum\c@twtoplines>\z@
+    \setbox\c@twfinaltext=\vsplit\c@twrawtext to\c@twtoplines\baselineskip
+  \fi
+%    \end{macrocode}
+% Calculate the `height' of the lines that make up the window. If
+% the window is in the center then this is twice the expected height
+% (at this point each final window line is stored as a pair of lines),
+% otherwise it is the expected height based on \meta{numcut}.
+%    \begin{macrocode}
+  \c@twtopht=\c@twwinlines\baselineskip
+  \ifnum\c@twl@c=\z@ % center
+    \c@twtopht=2\c@twtopht
+  \fi
+%    \end{macrocode}
+% Split the window lines from what is left in the \cs{c@twrawtext} box
+% into box \cs{c@twholdwin} which will then contain the narrowed text for the
+% window side(s).
+%    \begin{macrocode}
+  \setbox\c@twholdwin=\vsplit\c@twrawtext to\c@twtopht
+%    \end{macrocode}
+% Now `compose' the window side(s) text (\cs{c@twholdwin}) 
+% into the final set of windowed lines (\cs{c@twwindow}).
+% The process depends on whether the cutout is at the left, right, or center. 
+%    \begin{macrocode}
+  \ifnum\c@twl@c=\z@% center
+    \c@twcompctr{\c@twholdwin}{\c@twwindow}
+  \else% left or right
+    \c@twcomplftrt{\c@twholdwin}{\c@twwindow}
+  \fi
+%    \end{macrocode}
+% Assemble the various boxes into the final box (\cs{c@twfinaltext}) 
+% to be output.
+%    \begin{macrocode}
+  \setbox\c@twfinaltext=
+    \vbox{\ifnum\c@twtoplines>\z@\unvbox\c@twfinaltext\vskip\c@twvsilg\fi
+    \unvbox\c@twwindow%
+    \vskip-\c@twvsilg\unvbox\c@twrawtext}%
+%    \end{macrocode}
+% We're done, hand off the paragraph.
+%    \begin{macrocode}
+  \box\c@twfinaltext}
+
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{macro}{\c@twcompctr}
+% \begin{macro}{\c@twfirst}
+%  \cs{c@twcompctr}\marg{linepairbox}\marg{composedbox} composes a 
+% center window box \meta{linepairbox} consisting of pairs of short
+% lines into a box \meta{composedbox} where the pairs have been assembled
+% into single lines.
+%
+% \cs{c@twfirst} is used as a flag for indicating the first line of a cutout.
+%    \begin{macrocode}
+\newcommand*{\c@twcompctr}[2]{%
+  \def\c@twfirst{1}
+  \loop\advance\c@twwinlines\m@ne
+%    \end{macrocode}
+% Get a pair of lines and remove skips.
+%    \begin{macrocode}
+  \setbox\c@twslicea=\vsplit#1 to\baselineskip
+  \setbox\c@twsliceb=\vsplit#1 to\baselineskip
+  \c@twprune{\c@twslicea}{\c@twlftside}%
+  \c@twprune{\c@twsliceb}{\c@twrtside}%
+%    \end{macrocode}
+%    \begin{macrocode}
+  \ifnum\c@twfirst=\@ne
+%    \end{macrocode}
+% The first time put the texts into a box at the left and right with
+% \cs{pageinwindow} at the end of the left text.
+%    \begin{macrocode}
+    \setbox#2=\vbox{\unvbox#2\hbox
+    to\hsize{\box\c@twslicea\pageinwindow\hfil\box\c@twsliceb}}%
+  \else
+%    \end{macrocode}
+% For further lines just put the texts at the left and right.
+%    \begin{macrocode}
+    \setbox#2=\vbox{\unvbox#2\hbox
+    to\hsize{\box\c@twslicea\hfil\box\c@twsliceb}}%
+  \fi
+%    \end{macrocode}
+%    \begin{macrocode}
+  \def\c@twfirst{2}
+  \ifnum\c@twwinlines>\z@\repeat}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twcomplftrt}
+% Compose an open (left or right) sided rectangular window.
+%    \begin{macrocode}
+\newcommand*{\c@twcomplftrt}[2]{%
+  \def\c@twfirst{1}%
+  \loop\advance\c@twwinlines\m@ne
+%    \end{macrocode}
+% For an open window we simply deal with one line at a time, not
+% pairs. In other respects the code is generally similar to that for 
+% \cs{c@twcompctr}.
+%    \begin{macrocode}
+  \setbox\c@twslicea=\vsplit#1 to\baselineskip
+  \ifnum\c@twl@c=\m@ne%    open left, text at right
+    \c@twprune{\c@twslicea}{\c@twrtside}
+    \ifnum\c@twfirst=\@ne
+      \setbox#2=\vbox{\unvbox#2\hbox
+      to\hsize{\pageinwindow\hfil\box\c@twslicea}}%
+    \else
+      \setbox#2=\vbox{\unvbox#2\hbox
+      to\hsize{\mbox{}\hfil\box\c@twslicea}}%
+    \fi
+    \def\c@twfirst{2}
+  \else
+    \ifnum\c@twl@c=\@ne% open right, text at left
+      \c@twprune{\c@twslicea}{\c@twlftside}
+      \ifnum\c@twfirst=\@ne\relax
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\pageinwindow}}%
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea}}%
+      \fi
+      \def\c@twfirst{2}
+    \fi
+  \fi
+  \ifnum\c@twwinlines>\z@\repeat}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\c@twprune}
+% \cs{c@twprune}\marg{vbox}\marg{width} chops off the \cs{lastskip}.
+% It takes a \meta{vbox} containing a single \cs{hbox}, \cs{unvbox}es
+% it,cancels the \cs{lastskip} which can be put at the right of
+% a short \cs{parshape} line, then puts it in a box width \meta{width}.
+%    \begin{macrocode}
+\newcommand*{\c@twprune}[2]{%
+  \unvbox#1 \setbox#1=\lastbox % \box#1 is now an \hbox
+  \setbox#1=\hbox to#2{\strut\unhbox#1\unskip}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@twmakeparspec}
+% Calculate the required \cs{parshape} spec for a paragraph with a rectangular
+% cutout window.
+%    \begin{macrocode}
+\newcommand*{\c@twmakeparspec}{%
+%    \end{macrocode}
+% \cs{c@twcnt} is the total number of lines for the \cs{parshape}, i.e.,
+% the number of the top lines plus (twice) the number of window line
+% plus one for the remaining lines.
+%    \begin{macrocode}
+  \c@twcnt=\c@twwinlines 
+  \ifnum\c@twl@c=\z@
+    \multiply \c@twcnt by \tw@
+  \fi
+  \advance\c@twcnt by \c@twtoplines \advance\c@twcnt by \@ne
+%    \end{macrocode}
+% If there are top lines generate a \verb?0pt \hsize? for each
+%    \begin{macrocode}
+  \ifnum\c@twtoplines>\z@
+    \loop\c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}
+      \advance\c@twtoplines -1\relax
+    \ifnum\c@twtoplines>\z@\repeat
+  \fi
+%    \end{macrocode}
+% Now do the cutout portion of the spec.
+%    \begin{macrocode}
+  \ifnum\c@twl@c=\m@ne % openleft
+%    \end{macrocode}
+% For open left calculate the width of the open cutout as \cs{c@twlftside}.
+%    \begin{macrocode}
+    \c@twlftside=\hsize
+    \advance\c@twlftside -\c@twrtside
+  \fi
+%    \end{macrocode}
+% Loop over the windowed lines.
+%    \begin{macrocode}
+  \loop\c@twtoka=%
+    \ifnum\c@twl@c=\m@ne % openleft
+%    \end{macrocode}
+% For open left generate a \verb?\c@twlftside \c@twrtside? for each.
+%    \begin{macrocode}
+      \expandafter{\the\c@twtoka \c@twlftside \c@twrtside} 
+    \else
+      \ifnum\c@twl@c=\@ne % openright
+%    \end{macrocode}
+% For open right generate a \verb?\0pt c@twlftside? for each
+%    \begin{macrocode}
+        \expandafter{\the\c@twtoka 0pt \c@twlftside} 
+      \else %center
+%    \end{macrocode}
+% For centered generate \verb?0pt \c@twlftside 0pt \c@twrtside? for each pair.
+%    \begin{macrocode}
+        \expandafter{\the\c@twtoka 0pt \c@twlftside 0pt \c@twrtside}
+      \fi
+    \fi
+    \advance\c@twwinlines \m@ne
+  \ifnum\c@twwinlines>\z@\repeat
+%    \end{macrocode}
+% That finishes the cutout portion. For the remaining lines in the
+% paragraph just generate a single \verb?0pt \hsize?.
+%    \begin{macrocode}
+  \c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@twcalcshift}
+% Calculate the estimated vertical shift needed for the window.
+% I determined the values experimentally based on a 10pt font.
+% In may be different for different fonts, but I hope not.
+%    \begin{macrocode}
+\newcommand*{\c@twcalcshift}{% vertical shift
+  \c@twvsilg=\c@twwinlines\baselineskip
+  \ifnum\c@twtoplines<\@ne
+    \advance\c@twvsilg -0.25\baselineskip
+  \fi
+  \c@twvsilg=0.5\c@twvsilg
+  \ifnum\c@twl@c=\z@\else
+    \c@twvsilg=0.5\c@twvsilg
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Shaped cutouts}
+%
+% \begin{macro}{\picinwindow}
+% A zero-sized picture, with contents \cs{putstuffinpic}, which is placed in
+% the center of the first gap in a shaped cutout.
+%    \begin{macrocode}
+\newcommand*{\picinwindow}{%
+  \begin{picture}(0,0)
+  \putstuffinpic
+  \end{picture}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\putstuffinpic}
+% Default \cs{putstuffinpic} is empty.
+%    \begin{macrocode}
+\newcommand*{\putstuffinpic}{}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{environment}{shapedcutout}
+% \begin{macro}{\c@twb}
+% A shaped cutout where the user defines the shape. \\
+% \verb?\begin{shapedcutout}?\marg{numtop}\marg{numcut}\marg{shapespec} \\
+% where \meta{numtop} is the number of full lines above the window,
+% \meta{numcut} is the number of lines to be cut (giving the height 
+% of the window) and
+% \meta{shapespec} is the user's specification of the shape of the 
+% surroundings of the cutout. This is in the form of a comma-separated
+% list of either the pairs of widths of the left and right texts of a centered
+% cutout or the widths of the left or right texts of an open cutout.
+%
+% \cs{c@twb} holds arg 3 (\meta{shapespec}), the user's parspec.
+%
+%  The code is very similar to that for the |cutout| environment.
+%    \begin{macrocode}
+\newenvironment{shapedcutout}[3]{%
+  \cutfuzz
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#2\relax
+  \edef\c@twb{#3}%       user's parspec
+%    \end{macrocode}
+% Generate the top lines portion of the parspec followed by the cutout
+% portion.
+%    \begin{macrocode}
+  \c@twmaketopoddspec
+  \c@twbuildoddspec{#3}
+%    \end{macrocode}
+% Continue like the |cutout| code.
+%    \begin{macrocode}
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#2\relax
+  \c@twcalcshift \vskip-\c@twvsilg
+  \setbox\c@twrawtext=\vbox\bgroup
+%    \end{macrocode}
+% \cs{c@twcnt} is the total number of parshape lines; \cs{c@twtoka} is the
+% spec for the top lines; \cs{c@twtokb} is the spec for the cutout lines;
+% and \verb?0pt \hsize? is the spec for the remainder of the paragraph.
+%    \begin{macrocode}
+  \parshape=\c@twcnt \the\c@twtoka \the\c@twtokb 0pt \hsize}%
+%    \end{macrocode}
+% \end{macro}
+% The code for the end of the environment, where most of the work is done.
+% It is similar to the code for the end of the |cutout| environment.
+%    \begin{macrocode}
+ {\egroup
+  \parshape=0
+  \c@twcalcilg
+  \ifnum\c@twtoplines>\z@
+    \setbox\c@twfinaltext=\vsplit\c@twrawtext to\c@twtoplines\baselineskip
+  \fi
+  \c@twtopht=\c@twwinlines\baselineskip
+  \ifnum\c@twl@c=\z@ % center
+    \c@twtopht=2\c@twtopht
+  \fi
+  \setbox\c@twholdwin=\vsplit\c@twrawtext to\c@twtopht
+  \ifnum\c@twl@c=\z@%    center
+    \c@twcompoddctr{\c@twholdwin}{\c@twwindow}
+  \else% open left or righyt
+    \c@twcompoddlftrt{\c@twholdwin}{\c@twwindow}
+  \fi
+  \setbox\c@twfinaltext=
+    \vbox{\ifnum\c@twtoplines>\z@\unvbox\c@twfinaltext\vskip\c@twvsilg\fi
+    \unvbox\c@twwindow%
+    \vskip-\c@twvsilg\unvbox\c@twrawtext}%
+  \box\c@twfinaltext}
+
+%    \end{macrocode}
+% \end{environment}
+%
+% \begin{macro}{\c@twmaketopoddspec}
+%  Make up the easy part of the odd \cs{parshape} specification; 
+% total number \cs{c@twcnt} and the toplines spec (\cs{c@twtoka}).
+%    \begin{macrocode}
+\newcommand*{\c@twmaketopoddspec}{%
+  \c@twcnt=\c@twwinlines 
+  \ifnum\c@twl@c=\z@
+    \multiply \c@twcnt by \tw@
+  \fi
+  \advance\c@twcnt by \c@twtoplines \advance\c@twcnt by \@ne
+%% \c@twcnt is total of toplines + 2(window lines) + 1
+  \c@twtoka={}
+  \ifnum\c@twtoplines>\z@
+    \loop\c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}
+      \advance\c@twtoplines -1\relax
+      \ifnum\c@twtoplines>\z@\repeat
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@twaddtospec}
+% Adds a `zero-indented line' to a parshape spec being assembled in 
+% \cs{c@twtokb}.
+%    \begin{macrocode}
+\newcommand*{\c@twaddtospec}[1]{%
+  \c@twtokb=\c@twxpf{\the\c@twtokb 0pt #1 }}
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{\c@twbuildoddspec}
+% \begin{macro}{\c@twxpf}
+% \cs{c@twbuildoddspec}\marg{commalist} builds up the parshape spec for 
+% the odd cutout lines from the comma-separated list of lengths
+% in \meta{commalist}.
+%
+% \cs{c@twxpf} is a shorthand for \cs{expandafter}
+% to try and make the code shorter to read.
+% \begin{macro}{\c@twlspec}
+% \cs{c@twlspec} is used as a temporary variable when iterating over 
+% a comma-separated list.
+% \end{macro}
+%
+%    \begin{macrocode}
+\let\c@twxpf\expandafter
+\newcommand*{\c@twbuildoddspec}[1]{%
+  \c@twtokb={}
+  \@for\c@twlspec:=#1\do{%
+    \c@twxpf\c@twxpf\c@twxpf\c@twaddtospec\c@twxpf{\c@twlspec}}}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twcompoddctr}
+% \begin{macro}{\c@twrounds}
+% Compose the lines of an odd shaped center cutout.
+% 
+% We go through the user's shape list an item at a time but we need to
+% collect pairs of items. The \cs{c@twrounds} variable is for managing the
+% pairing. \cs{c@twfirst} is a flag for positioning the \cs{picinwindow} in
+% the first line of the cutout.
+%    \begin{macrocode}
+\newcommand*{\c@twcompoddctr}[2]{%
+  \def\c@twrounds{1}
+  \def\c@twfirst{1}
+  \@for\c@twlspec:=\c@twb\do{%
+    \ifnum\c@twrounds=1
+      \setbox\c@twslicea=\vsplit#1 to\baselineskip % first of pair
+      \c@twprune{\c@twslicea}{\c@twlspec}%
+      \def\c@twrounds{2}
+    \else
+      \setbox\c@twsliceb=\vsplit#1 to\baselineskip % second of pair
+      \c@twprune{\c@twsliceb}{\c@twlspec}%
+      \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\picinwindow\hfil\box\c@twsliceb}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\box\c@twsliceb}}%
+      \fi
+      \def\c@twrounds{1}
+    \fi}}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\c@twcompoddlftrt}
+% Compose the open (left or right) lines of an odd shaped cutout.
+%    \begin{macrocode}
+\newcommand*{\c@twcompoddlftrt}[2]{%
+  \def\c@twfirst{1}
+  \@for\c@twlspec:=\c@twb\do{%
+    \setbox\c@twslicea=\vsplit#1 to\baselineskip % get a line
+    \c@twprune{\c@twslicea}{\c@twlspec}%
+    \ifnum\c@twl@c=\m@ne%   open left, text at right
+      \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\mbox{}\hfil\picinwindow\hfil\box\c@twslicea}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\mbox{}\hfil\box\c@twslicea}}%
+      \fi
+    \else
+      \ifnum\c@twl@c=\@ne%  open right, text at left
+        \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\picinwindow\hfil}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil}}%
+      \fi
+    \fi
+  \fi}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+%
+%
+%    The end of this package.
+%    \begin{macrocode}
+%</pkg>
+%    \end{macrocode}
+%
+%
+%
+%
+% \Finale
+% \PrintIndex
+%
+\endinput
+
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+
+
diff --git a/Master/texmf-dist/source/latex/cutwin/cutwin.ins b/Master/texmf-dist/source/latex/cutwin/cutwin.ins
new file mode 100755
index 00000000000..e4cd30f2b8b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cutwin/cutwin.ins
@@ -0,0 +1,81 @@
+%% cutwin.ins
+%% Author: Peter Wilson, Herries Press (herries dot press at earthlink dot net)
+%%         and Alan Hoenig
+%% Copyright 2010 Peter R. Wilson
+%%
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3 of this license or (at your option) any 
+%% later version.
+%% The latest version of the license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of
+%% LaTeX version 2003/06/01 or later.
+%%
+%% This work has the LPPL maintenance status "author-maintained".
+%%
+%% This work consists of the files listed in the README file.
+%%
+%%
+%% This file will generate fast loadable files and documentation
+%% driver files from the doc files in this work when run through
+%% LaTeX.
+%%
+%%
+%%
+%% --------------- start of docstrip commands ------------------
+%%
+\def\batchfile{cutwin.ins}
+\input docstrip.tex
+\preamble
+
+----------------------------------------------------------------- 
+  Author: Peter Wilson, Herries Press (herries dot press at earthlink dot net)
+          and Alan Hoenig
+  Copyright 2010 Peter R. Wilson
+ 
+  This work may be distributed and/or modified under the
+  conditions of the LaTeX Project Public License, either
+  version 1.3 of this license or (at your option) any 
+  later version.
+  The latest version of the license is in
+     http://www.latex-project.org/lppl.txt
+  and version 1.3 or later is part of all distributions of
+  LaTeX version 2003/06/01 or later.
+ 
+  This work has the LPPL maintenance status "author-maintained".
+ 
+  This work consists of the files listed in the README file.
+----------------------------------------------------------------- 
+
+\endpreamble
+
+\keepsilent
+
+%%% \Msg{*** Generating the driver file ***}
+%%% \generateFile{cutwin.drv}{t}{\from{cutwin.dtx}{driver}}
+
+\Msg{*** Generating the LaTeX2e package files ***}
+
+\generateFile{cutwin.sty}{t}{\from{cutwin.dtx}{pkg}}
+
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* file(s) into a directory searched by TeX. For more information}
+\Msg{* see the FAQ on CTAN at /help/uk-tex-faq.}
+\Msg{*}
+\Msg{* \space\space cutwin.sty}
+\Msg{*}
+\Msg{*}
+\Msg{* To produce the documentation run the files ending with}
+\Msg{* `.dtx' through LaTeX.}
+\Msg{* For an index, process any name.idx file by:}
+\Msg{* \space\space\space\space makeindex -s gind.ist name}
+\Msg{* For a list of changes, process any name.glo file by:}
+\Msg{* \space\space\space\space makeindex -s gglo.ist -o name.gls name.glo}
+\Msg{*}
+\Msg{* Happy TeXing}
+\Msg{***********************************************************}
+
+\endinput
diff --git a/Master/texmf-dist/tex/latex/cutwin/cutwin.sty b/Master/texmf-dist/tex/latex/cutwin/cutwin.sty
new file mode 100644
index 00000000000..dcd73b55a1a
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/cutwin/cutwin.sty
@@ -0,0 +1,326 @@
+%%
+%% This is file `cutwin.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% cutwin.dtx  (with options: `pkg')
+%% 
+%% -----------------------------------------------------------------
+%%   Author: Peter Wilson, Herries Press (herries dot press at earthlink dot net)
+%%           and Alan Hoenig
+%%   Copyright 2010 Peter R. Wilson
+%% 
+%%   This work may be distributed and/or modified under the
+%%   conditions of the LaTeX Project Public License, either
+%%   version 1.3 of this license or (at your option) any
+%%   later version.
+%%   The latest version of the license is in
+%%      http://www.latex-project.org/lppl.txt
+%%   and version 1.3 or later is part of all distributions of
+%%   LaTeX version 2003/06/01 or later.
+%% 
+%%   This work has the LPPL maintenance status "author-maintained".
+%% 
+%%   This work consists of the files listed in the README file.
+%% -----------------------------------------------------------------
+%% 
+%% \iffalse meta-comment
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{cutwin}[2010/09/29 v0.1 cutout windows]
+
+\newcount\c@twwinlines % window lines
+\newcount\c@twtoplines % top lines
+\newcount\c@twcnt      % a count
+
+\newdimen\c@twlftside  % left width
+\newdimen\c@twrtside   % right width
+\newdimen\c@twtopht    % height of top text
+\newdimen\c@twvsilg    % Vertical Shift or InterLine Glue
+
+\newtoks\c@twtoka      % build of parshape spec
+\newtoks\c@twtokb      % build of parshape spec
+
+\newbox\c@twrawtext    % text as input
+\newbox\c@twholdwin    % text for window sides
+\newbox\c@twwindow     % composed window
+\newbox\c@twfinaltext  % final assembled cutout paragraph
+\newbox\c@twslicea     % slice A of window text
+\newbox\c@twsliceb     % slice B of window text
+
+\newcommand*{\opencutleft}{\def\c@twl@c{-1}}
+\newcommand*{\opencutright}{\def\c@twl@c{1}}
+\newcommand*{\opencutcenter}{\def\c@twl@c{0}}
+\opencutcenter
+
+\newcommand{\cutfuzz}{\vbadness=50000
+   \hbadness=50000
+  \sloppy}
+
+\newcommand*{\c@twcalcilg}{%
+  \c@twvsilg=\baselineskip
+  \setbox0=\hbox{(}
+  \advance\c@twvsilg-\ht0 \advance\c@twvsilg-\dp0}
+
+\newcommand*{\pageinwindow}{%
+  \@tempdimc=\c@twwinlines\baselineskip % cutout height
+  \@tempdimb=\hsize
+  \ifnum\c@twl@c=\m@ne % openleft
+    \advance\@tempdimb -\c@twrtside
+  \else
+    \ifnum\c@twl@c=\@ne % openright
+      \advance\@tempdimb -\c@twlftside
+    \else% center
+      \advance\@tempdimb - \c@twlftside
+      \advance\@tempdimb - \c@twrtside
+    \fi
+  \fi
+  \begin{picture}(0,0)%
+    \put(0,0){%
+      \raisebox{4pt}{%
+        \begin{minipage}[t][\@tempdimc][c]{\@tempdimb}
+          \windowpagestuff
+        \end{minipage}
+      }% end raisebox
+    }% end put
+  \end{picture}}
+\newcommand*{\windowpagestuff}{}
+
+\newenvironment{cutout}[4]{%
+  \cutfuzz
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#4\relax
+  \c@twlftside=#2\relax
+  \c@twrtside=#3\relax
+  \c@twtoka={}%
+  \c@twmakeparspec
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#4\relax
+  \c@twcalcshift \vskip-\c@twvsilg
+  \setbox\c@twrawtext=\vbox\bgroup
+  \parshape=\c@twcnt \the\c@twtoka}%
+  {\egroup% end \box\c@twrawtext
+  \parshape=0 % reset parshape;
+  \c@twcalcilg % find ILG using current font
+  \ifnum\c@twtoplines>\z@
+    \setbox\c@twfinaltext=\vsplit\c@twrawtext to\c@twtoplines\baselineskip
+  \fi
+  \c@twtopht=\c@twwinlines\baselineskip
+  \ifnum\c@twl@c=\z@ % center
+    \c@twtopht=2\c@twtopht
+  \fi
+  \setbox\c@twholdwin=\vsplit\c@twrawtext to\c@twtopht
+  \ifnum\c@twl@c=\z@% center
+    \c@twcompctr{\c@twholdwin}{\c@twwindow}
+  \else% left or right
+    \c@twcomplftrt{\c@twholdwin}{\c@twwindow}
+  \fi
+  \setbox\c@twfinaltext=
+    \vbox{\ifnum\c@twtoplines>\z@\unvbox\c@twfinaltext\vskip\c@twvsilg\fi
+    \unvbox\c@twwindow%
+    \vskip-\c@twvsilg\unvbox\c@twrawtext}%
+  \box\c@twfinaltext}
+
+\newcommand*{\c@twcompctr}[2]{%
+  \def\c@twfirst{1}
+  \loop\advance\c@twwinlines\m@ne
+  \setbox\c@twslicea=\vsplit#1 to\baselineskip
+  \setbox\c@twsliceb=\vsplit#1 to\baselineskip
+  \c@twprune{\c@twslicea}{\c@twlftside}%
+  \c@twprune{\c@twsliceb}{\c@twrtside}%
+  \ifnum\c@twfirst=\@ne
+    \setbox#2=\vbox{\unvbox#2\hbox
+    to\hsize{\box\c@twslicea\pageinwindow\hfil\box\c@twsliceb}}%
+  \else
+    \setbox#2=\vbox{\unvbox#2\hbox
+    to\hsize{\box\c@twslicea\hfil\box\c@twsliceb}}%
+  \fi
+  \def\c@twfirst{2}
+  \ifnum\c@twwinlines>\z@\repeat}
+
+\newcommand*{\c@twcomplftrt}[2]{%
+  \def\c@twfirst{1}%
+  \loop\advance\c@twwinlines\m@ne
+  \setbox\c@twslicea=\vsplit#1 to\baselineskip
+  \ifnum\c@twl@c=\m@ne%    open left, text at right
+    \c@twprune{\c@twslicea}{\c@twrtside}
+    \ifnum\c@twfirst=\@ne
+      \setbox#2=\vbox{\unvbox#2\hbox
+      to\hsize{\pageinwindow\hfil\box\c@twslicea}}%
+    \else
+      \setbox#2=\vbox{\unvbox#2\hbox
+      to\hsize{\mbox{}\hfil\box\c@twslicea}}%
+    \fi
+    \def\c@twfirst{2}
+  \else
+    \ifnum\c@twl@c=\@ne% open right, text at left
+      \c@twprune{\c@twslicea}{\c@twlftside}
+      \ifnum\c@twfirst=\@ne\relax
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\pageinwindow}}%
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea}}%
+      \fi
+      \def\c@twfirst{2}
+    \fi
+  \fi
+  \ifnum\c@twwinlines>\z@\repeat}
+
+\newcommand*{\c@twprune}[2]{%
+  \unvbox#1 \setbox#1=\lastbox % \box#1 is now an \hbox
+  \setbox#1=\hbox to#2{\strut\unhbox#1\unskip}}
+
+\newcommand*{\c@twmakeparspec}{%
+  \c@twcnt=\c@twwinlines
+  \ifnum\c@twl@c=\z@
+    \multiply \c@twcnt by \tw@
+  \fi
+  \advance\c@twcnt by \c@twtoplines \advance\c@twcnt by \@ne
+  \ifnum\c@twtoplines>\z@
+    \loop\c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}
+      \advance\c@twtoplines -1\relax
+    \ifnum\c@twtoplines>\z@\repeat
+  \fi
+  \ifnum\c@twl@c=\m@ne % openleft
+    \c@twlftside=\hsize
+    \advance\c@twlftside -\c@twrtside
+  \fi
+  \loop\c@twtoka=%
+    \ifnum\c@twl@c=\m@ne % openleft
+      \expandafter{\the\c@twtoka \c@twlftside \c@twrtside}
+    \else
+      \ifnum\c@twl@c=\@ne % openright
+        \expandafter{\the\c@twtoka 0pt \c@twlftside}
+      \else %center
+        \expandafter{\the\c@twtoka 0pt \c@twlftside 0pt \c@twrtside}
+      \fi
+    \fi
+    \advance\c@twwinlines \m@ne
+  \ifnum\c@twwinlines>\z@\repeat
+  \c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}}
+
+\newcommand*{\c@twcalcshift}{% vertical shift
+  \c@twvsilg=\c@twwinlines\baselineskip
+  \ifnum\c@twtoplines<\@ne
+    \advance\c@twvsilg -0.25\baselineskip
+  \fi
+  \c@twvsilg=0.5\c@twvsilg
+  \ifnum\c@twl@c=\z@\else
+    \c@twvsilg=0.5\c@twvsilg
+  \fi}
+
+\newcommand*{\picinwindow}{%
+  \begin{picture}(0,0)
+  \putstuffinpic
+  \end{picture}}
+\newcommand*{\putstuffinpic}{}
+
+\newenvironment{shapedcutout}[3]{%
+  \cutfuzz
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#2\relax
+  \edef\c@twb{#3}%       user's parspec
+  \c@twmaketopoddspec
+  \c@twbuildoddspec{#3}
+  \c@twtoplines=#1\relax
+  \c@twwinlines=#2\relax
+  \c@twcalcshift \vskip-\c@twvsilg
+  \setbox\c@twrawtext=\vbox\bgroup
+  \parshape=\c@twcnt \the\c@twtoka \the\c@twtokb 0pt \hsize}%
+ {\egroup
+  \parshape=0
+  \c@twcalcilg
+  \ifnum\c@twtoplines>\z@
+    \setbox\c@twfinaltext=\vsplit\c@twrawtext to\c@twtoplines\baselineskip
+  \fi
+  \c@twtopht=\c@twwinlines\baselineskip
+  \ifnum\c@twl@c=\z@ % center
+    \c@twtopht=2\c@twtopht
+  \fi
+  \setbox\c@twholdwin=\vsplit\c@twrawtext to\c@twtopht
+  \ifnum\c@twl@c=\z@%    center
+    \c@twcompoddctr{\c@twholdwin}{\c@twwindow}
+  \else% open left or righyt
+    \c@twcompoddlftrt{\c@twholdwin}{\c@twwindow}
+  \fi
+  \setbox\c@twfinaltext=
+    \vbox{\ifnum\c@twtoplines>\z@\unvbox\c@twfinaltext\vskip\c@twvsilg\fi
+    \unvbox\c@twwindow%
+    \vskip-\c@twvsilg\unvbox\c@twrawtext}%
+  \box\c@twfinaltext}
+
+\newcommand*{\c@twmaketopoddspec}{%
+  \c@twcnt=\c@twwinlines
+  \ifnum\c@twl@c=\z@
+    \multiply \c@twcnt by \tw@
+  \fi
+  \advance\c@twcnt by \c@twtoplines \advance\c@twcnt by \@ne
+%% \c@twcnt is total of toplines + 2(window lines) + 1
+  \c@twtoka={}
+  \ifnum\c@twtoplines>\z@
+    \loop\c@twtoka=\expandafter{\the\c@twtoka 0pt \hsize}
+      \advance\c@twtoplines -1\relax
+      \ifnum\c@twtoplines>\z@\repeat
+  \fi}
+
+\newcommand*{\c@twaddtospec}[1]{%
+  \c@twtokb=\c@twxpf{\the\c@twtokb 0pt #1 }}
+\let\c@twxpf\expandafter
+\newcommand*{\c@twbuildoddspec}[1]{%
+  \c@twtokb={}
+  \@for\c@twlspec:=#1\do{%
+    \c@twxpf\c@twxpf\c@twxpf\c@twaddtospec\c@twxpf{\c@twlspec}}}
+
+\newcommand*{\c@twcompoddctr}[2]{%
+  \def\c@twrounds{1}
+  \def\c@twfirst{1}
+  \@for\c@twlspec:=\c@twb\do{%
+    \ifnum\c@twrounds=1
+      \setbox\c@twslicea=\vsplit#1 to\baselineskip % first of pair
+      \c@twprune{\c@twslicea}{\c@twlspec}%
+      \def\c@twrounds{2}
+    \else
+      \setbox\c@twsliceb=\vsplit#1 to\baselineskip % second of pair
+      \c@twprune{\c@twsliceb}{\c@twlspec}%
+      \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\picinwindow\hfil\box\c@twsliceb}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\box\c@twsliceb}}%
+      \fi
+      \def\c@twrounds{1}
+    \fi}}
+
+\newcommand*{\c@twcompoddlftrt}[2]{%
+  \def\c@twfirst{1}
+  \@for\c@twlspec:=\c@twb\do{%
+    \setbox\c@twslicea=\vsplit#1 to\baselineskip % get a line
+    \c@twprune{\c@twslicea}{\c@twlspec}%
+    \ifnum\c@twl@c=\m@ne%   open left, text at right
+      \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\mbox{}\hfil\picinwindow\hfil\box\c@twslicea}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\mbox{}\hfil\box\c@twslicea}}%
+      \fi
+    \else
+      \ifnum\c@twl@c=\@ne%  open right, text at left
+        \ifnum\c@twfirst=1
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil\picinwindow\hfil}}%
+        \def\c@twfirst{2}
+      \else
+        \setbox#2=\vbox{\unvbox#2\hbox
+        to\hsize{\box\c@twslicea\hfil}}%
+      \fi
+    \fi
+  \fi}}
+
+\endinput
+%%
+%% End of file `cutwin.sty'.