tl-update-auto

git-svn-id: svn://tug.org/texlive/trunk@61015 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 118 insertions, 116 deletions

diff --git a/Master/texmf-dist/tex/texinfo/texinfo.tex b/Master/texmf-dist/tex/texinfo/texinfo.tex
index 89bd6025a61..6e194298948 100644
--- a/Master/texmf-dist/tex/texinfo/texinfo.tex
+++ b/Master/texmf-dist/tex/texinfo/texinfo.tex
@@ -1,9 +1,9 @@
 % texinfo.tex -- TeX macros to handle Texinfo files.
-% 
+%
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2021-04-25.21}
+\def\texinfoversion{2021-11-01.16}
 %
 % Copyright 1985, 1986, 1988, 1990-2021 Free Software Foundation, Inc.
 %
@@ -218,7 +218,7 @@
 % @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
 % aren't perfect, it's not the end of the world, being an error message,
 % after all.
-% 
+%
 \def\errormsg{\begingroup \indexnofonts \doerrormsg}
 \def\doerrormsg#1{\errmessage{#1}}
 
@@ -323,9 +323,9 @@
 % the output routine.  The saved contents are valid until we actually
 % \shipout a page.
 %
-% (We used to run a short output routine to actually set \topmark and 
-% \firstmark to the right values, but if this was called with an empty page 
-% containing whatsits for writing index entries, the whatsits would be thrown 
+% (We used to run a short output routine to actually set \topmark and
+% \firstmark to the right values, but if this was called with an empty page
+% containing whatsits for writing index entries, the whatsits would be thrown
 % away and the index auxiliary file would remain empty.)
 %
 \newtoks\savedtopmark
@@ -449,7 +449,7 @@
   }%
 }
 
-% First remove any @comment, then any @c comment.  Pass the result on to 
+% First remove any @comment, then any @c comment.  Pass the result on to
 % \argcheckspaces.
 \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
 \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
@@ -1093,8 +1093,8 @@ where each line of input produces a line of output.}
         end
       end
     }
-    % The -2 in the arguments here gives all the input to TeX catcode 12 
-    % (other) or 10 (space), preventing undefined control sequence errors. See 
+    % The -2 in the arguments here gives all the input to TeX catcode 12
+    % (other) or 10 (space), preventing undefined control sequence errors. See
     % https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
     %
   \endgroup
@@ -1188,7 +1188,7 @@ where each line of input produces a line of output.}
 % for display in the outlines, and in other places.  Thus, we have to
 % double any backslashes.  Otherwise, a name like "\node" will be
 % interpreted as a newline (\n), followed by o, d, e.  Not good.
-% 
+%
 % See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
 % related messages.  The final outcome is that it is up to the TeX user
 % to double the backslashes and otherwise make the string valid, so
@@ -1476,7 +1476,7 @@ output) for that.)}
       % We use the node names as the destinations.
       %
       % Currently we prefix the section name with the section number
-      % for chapter and appendix headings only in order to avoid too much 
+      % for chapter and appendix headings only in order to avoid too much
       % horizontal space being required in the PDF viewer.
       \def\numchapentry##1##2##3##4{%
         \dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1499,7 +1499,7 @@ output) for that.)}
       % their "best" equivalent, based on the @documentencoding.  Too
       % much work for too little return.  Just use the ASCII equivalents
       % we use for the index sort strings.
-      % 
+      %
       \indexnofonts
       \setupdatafile
       % We can have normal brace characters in the PDF outlines, unlike
@@ -1724,7 +1724,7 @@ output) for that.)}
       % We use node names as destinations.
       %
       % Currently we prefix the section name with the section number
-      % for chapter and appendix headings only in order to avoid too much 
+      % for chapter and appendix headings only in order to avoid too much
       % horizontal space being required in the PDF viewer.
       \def\partentry##1##2##3##4{}% ignore parts in the outlines
       \def\numchapentry##1##2##3##4{%
@@ -2736,7 +2736,7 @@ end
 }
 
 % Commands to set the quote options.
-% 
+%
 \parseargdef\codequoteundirected{%
   \def\temp{#1}%
   \ifx\temp\onword
@@ -2777,7 +2777,7 @@ end
 % If we are in a monospaced environment, however, 1) always use \ttsl,
 % and 2) do not add an italic correction.
 \def\dosmartslant#1#2{%
-  \ifusingtt 
+  \ifusingtt
     {{\ttsl #2}\let\next=\relax}%
     {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
   \next
@@ -2923,14 +2923,14 @@ end
   \gdef\codedash{\futurelet\next\codedashfinish}
   \gdef\codedashfinish{%
     \normaldash % always output the dash character itself.
-    % 
+    %
     % Now, output a discretionary to allow a line break, unless
     % (a) the next character is a -, or
     % (b) the preceding character is a -.
     % E.g., given --posix, we do not want to allow a break after either -.
     % Given --foo-bar, we do want to allow a break between the - and the b.
     \ifx\next\codedash \else
-      \ifx\codedashprev\codedash 
+      \ifx\codedashprev\codedash
       \else \discretionary{}{}{}\fi
     \fi
     % we need the space after the = for the case when \next itself is a
@@ -3020,7 +3020,7 @@ end
         % For pdfTeX and LuaTeX
         \ifurefurlonlylink
           % PDF plus option to not display url, show just arg
-          \unhbox0             
+          \unhbox0
         \else
           % PDF, normally display both arg and url for consistency,
           % visibility, if the pdf is eventually used to print, etc.
@@ -3033,7 +3033,7 @@ end
           % For XeTeX
           \ifurefurlonlylink
             % PDF plus option to not display url, show just arg
-            \unhbox0             
+            \unhbox0
           \else
             % PDF, normally display both arg and url for consistency,
             % visibility, if the pdf is eventually used to print, etc.
@@ -3091,10 +3091,10 @@ end
   }
 }
 
-% By default we'll break after the special characters, but some people like to 
-% break before the special chars, so allow that.  Also allow no breaking at 
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that.  Also allow no breaking at
 % all, for manual control.
-% 
+%
 \parseargdef\urefbreakstyle{%
   \def\txiarg{#1}%
   \ifx\txiarg\wordnone
@@ -3113,10 +3113,10 @@ end
 \def\wordnone{none}
 
 % Allow a ragged right output to aid breaking long URL's.  There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in 
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
 % the line is sufficient), a break at the \penalty with extra glue added
 % at the end of the line, or no break at all here.
-%   Changing the value of the penalty and/or the amount of stretch affects how 
+%   Changing the value of the penalty and/or the amount of stretch affects how
 % preferable one choice is over the other.
 \def\urefallowbreak{%
   \penalty0\relax
@@ -3344,7 +3344,7 @@ $$%
 % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
 % Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
 % except specified as a normal braced arg, so no newlines to worry about.
-% 
+%
 \def\outfmtnametex{tex}
 %
 \long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3352,7 +3352,7 @@ $$%
   \def\inlinefmtname{#1}%
   \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
 }
-% 
+%
 % @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
 % FMTNAME is tex, else ELSE-TEXT.
 \long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3368,7 +3368,7 @@ $$%
 % *right* brace they would have to use a command anyway, so they may as
 % well use a command to get a left brace too.  We could re-use the
 % delimiter character idea from \verb, but it seems like overkill.
-% 
+%
 \long\def\inlineraw{\tex \doinlineraw}
 \long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
 \def\doinlinerawtwo#1,#2,\finish{%
@@ -3614,6 +3614,9 @@ $$%
 \def\quotedblbase{{\ecfont \char"12}}
 \def\quotesinglbase{{\ecfont \char"0D}}
 %
+\def\L{{\ecfont \char"8A}} % L with stroke
+\def\l{{\ecfont \char"AA}} % l with stroke
+%
 % This positioning is not perfect (see the ogonek LaTeX package), but
 % we have the precomposed glyphs for the most common cases.  We put the
 % tests to use those glyphs in the single \ogonek macro so we have fewer
@@ -3645,7 +3648,7 @@ $$%
 % for non-CM glyphs.  That is ec* for regular text and tc* for the text
 % companion symbols (LaTeX TS1 encoding).  Both are part of the ec
 % package and follow the same conventions.
-% 
+%
 \def\ecfont{\etcfont{e}}
 \def\tcfont{\etcfont{t}}
 %
@@ -3725,7 +3728,7 @@ $$%
               after the title page.}}%
 \def\setshortcontentsaftertitlepage{%
   \errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
-              command; move your @shortcontents and @contents commands if you 
+              command; move your @shortcontents and @contents commands if you
               want the contents after the title page.}}%
 
 \parseargdef\shorttitlepage{%
@@ -3780,7 +3783,7 @@ $$%
 % don't worry much about spacing, ragged right.  This should be used
 % inside a \vbox, and fonts need to be set appropriately first. \par should
 % be specified before the end of the \vbox, since a vbox is a group.
-% 
+%
 \def\raggedtitlesettings{%
   \rm
   \hyphenpenalty=10000
@@ -4613,7 +4616,7 @@ $$%
 % Like \expandablevalue, but completely expandable (the \message in the
 % definition above operates at the execution level of TeX).  Used when
 % writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it 
+% If flag is undefined, pass through an unexpanded @value command: maybe it
 % will be set by the time it is read back in.
 %
 % NB flag names containing - or _ may not work here.
@@ -4637,7 +4640,7 @@ $$%
 
 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
 % with @set.
-% 
+%
 % To get the special treatment we need for `@end ifset,' we call
 % \makecond and then redefine.
 %
@@ -4670,7 +4673,7 @@ $$%
 % without the @) is in fact defined.  We can only feasibly check at the
 % TeX level, so something like `mathcode' is going to considered
 % defined even though it is not a Texinfo command.
-% 
+%
 \makecond{ifcommanddefined}
 \def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
 %
@@ -4778,8 +4781,8 @@ $$%
 \def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
 \def\docodeindexxxx #1{\docind{\indexname}{#1}}
 
-
-% Used for the aux, toc and index files to prevent expansion of Texinfo 
+
+% Used for the aux, toc and index files to prevent expansion of Texinfo
 % commands.
 %
 \def\atdummies{%
@@ -5126,11 +5129,11 @@ $$%
   \let\value\indexnofontsvalue
 }
 
-% Give the control sequence a definition that removes the {} that follows 
+% Give the control sequence a definition that removes the {} that follows
 % its use, e.g. @AA{} -> AA
 \def\indexnofontsdef#1#2{\def#1##1{#2}}%
 
-
+
 
 
 % #1 is the index name, #2 is the entry text.
@@ -5171,7 +5174,7 @@ $$%
   \ifx\suffix\indexisfl\def\suffix{f1}\fi
   % Open the file
   \immediate\openout\csname#1indfile\endcsname \jobname.\suffix
-  % Using \immediate above here prevents an object entering into the current 
+  % Using \immediate above here prevents an object entering into the current
   % box, which could confound checks such as those in \safewhatsit for
   % preceding skips.
   \typeout{Writing index file \jobname.\suffix}%
@@ -5223,7 +5226,7 @@ $$%
   \ifx\segment\isfinish
   \else
     %
-    % Fully expand the segment, throwing away any @sortas directives, and 
+    % Fully expand the segment, throwing away any @sortas directives, and
     % trim spaces.
     \edef\trimmed{\segment}%
     \edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5284,12 +5287,12 @@ $$%
 % the current value of \escapechar.
 \def\escapeisbackslash{\escapechar=`\\}
 
-% Use \ in index files by default.  texi2dvi didn't support @ as the escape 
-% character (as it checked for "\entry" in the files, and not "@entry").  When 
-% the new version of texi2dvi has had a chance to become more prevalent, then 
-% the escape character can change back to @ again.  This should be an easy 
-% change to make now because both @ and \ are only used as escape characters in 
-% index files, never standing for themselves. 
+% Use \ in index files by default.  texi2dvi didn't support @ as the escape
+% character (as it checked for "\entry" in the files, and not "@entry").  When
+% the new version of texi2dvi has had a chance to become more prevalent, then
+% the escape character can change back to @ again.  This should be an easy
+% change to make now because both @ and \ are only used as escape characters in
+% index files, never standing for themselves.
 %
 \set txiindexescapeisbackslash
 
@@ -5314,7 +5317,7 @@ $$%
   \def\}{\rbracechar{}}%
   \uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
   %
-  % Split the entry into primary entry and any subentries, and get the index 
+  % Split the entry into primary entry and any subentries, and get the index
   % sort key.
   \splitindexentry\indextext
   %
@@ -5495,18 +5498,18 @@ $$%
     \uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
       \expandafter\ifx\csname SETtxiskipindexfileswithbackslash\endcsname\relax
 \errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.  
+ERROR: A sorted index file in an obsolete format was skipped.
 To fix this problem, please upgrade your version of 'texi2dvi'
 or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo 
+If you are using an old version of 'texindex' (part of the Texinfo
 distribution), you may also need to upgrade to a newer version (at least 6.0).
 You may be able to typeset the index if you run
 'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by 
+You could also try setting the 'txiindexescapeisbackslash' flag by
 running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'.  If you do 
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'.  If you do
 this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again 
+If you continue to have problems, deleting the index files and starting again
 might help (with 'rm \jobname.?? \jobname.??s')%
 }%
       \else
@@ -5579,7 +5582,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   % bottom of a column to reduce an increase in inter-line spacing.
   \nobreak
   \vskip 0pt plus 5\baselineskip
-  \penalty -300 
+  \penalty -300
   \vskip 0pt plus -5\baselineskip
   %
   % Typeset the initial.  Making this add up to a whole number of
@@ -5695,7 +5698,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
       \advance\dimen@ii by 1\dimen@i
       \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
       \ifdim\dimen@ > 0.8\dimen@ii   % due to long index text
-        % Try to split the text roughly evenly.  \dimen@ will be the length of 
+        % Try to split the text roughly evenly.  \dimen@ will be the length of
         % the first line.
         \dimen@ = 0.7\dimen@
         \dimen@ii = \hsize
@@ -5903,7 +5906,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 \newbox\balancedcolumns
 \setbox\balancedcolumns=\vbox{shouldnt see this}%
 %
-% Only called for the last of the double column material.  \doublecolumnout 
+% Only called for the last of the double column material.  \doublecolumnout
 % does the others.
 \def\balancecolumns{%
   \setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5931,7 +5934,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
     }%
     % Now the left column is in box 1, and the right column in box 3.
     %
-    % Check whether the left column has come out higher than the page itself.  
+    % Check whether the left column has come out higher than the page itself.
     % (Note that we have doubled \vsize for the double columns, so
     % the actual height of the page is 0.5\vsize).
     \ifdim2\ht1>\vsize
@@ -6228,7 +6231,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 \let\top\unnumbered
 
 % Sections.
-% 
+%
 \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
 \def\seczzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
@@ -6251,7 +6254,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 }
 
 % Subsections.
-% 
+%
 % normally calls numberedsubseczzz:
 \outer\parseargdef\numberedsubsec{\numhead2{#1}}
 \def\numberedsubseczzz#1{%
@@ -6276,7 +6279,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 }
 
 % Subsubsections.
-% 
+%
 % normally numberedsubsubseczzz:
 \outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
 \def\numberedsubsubseczzz#1{%
@@ -7342,7 +7345,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 
 % @indentedblock is like @quotation, but indents only on the left and
 % has no optional argument.
-% 
+%
 \makedispenvdef{indentedblock}{\indentedblockstart}
 %
 \def\indentedblockstart{%
@@ -7592,6 +7595,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 %
 \def\printdefunline#1#2{%
   \begingroup
+    \plainfrenchspacing
     % call \deffnheader:
     #1#2 \endheader
     % common ending:
@@ -7639,7 +7643,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % @deftypefnnewline on|off says whether the return type of typed functions
 % are printed on their own line.  This affects @deftypefn, @deftypefun,
 % @deftypeop, and @deftypemethod.
-% 
+%
 \parseargdef\deftypefnnewline{%
   \def\temp{#1}%
   \ifx\temp\onword
@@ -7658,8 +7662,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % \dosubind {index}{topic}{subtopic}
 %
 % If SUBTOPIC is present, precede it with a space, and call \doind.
-% (At some time during the 20th century, this made a two-level entry in an 
-% index such as the operation index.  Nobody seemed to notice the change in 
+% (At some time during the 20th century, this made a two-level entry in an
+% index such as the operation index.  Nobody seemed to notice the change in
 % behaviour though.)
 \def\dosubind#1#2#3{%
   \def\thirdarg{#3}%
@@ -7834,7 +7838,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
       \tclose{\temp}% typeset the return type
       \ifrettypeownline
         % put return type on its own line; prohibit line break following:
-        \hfil\vadjust{\nobreak}\break  
+        \hfil\vadjust{\nobreak}\break
       \else
         \space  % type on same line, so just followed by a space
       \fi
@@ -7988,7 +7992,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \scantokens{#1@comment}%
   %
   % The \comment is to remove the \newlinechar added by \scantokens, and
-  % can be noticed by \parsearg.  Note \c isn't used because this means cedilla 
+  % can be noticed by \parsearg.  Note \c isn't used because this means cedilla
   % in math mode.
 }
 
@@ -8194,7 +8198,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % list to some hook where the argument is to be expanded.  If there are
 % less than 10 arguments that hook is to be replaced by ##N where N
 % is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.  
+% defined `a la TeX in the macro body.
 %
 % That gets used by \mbodybackslash (above).
 %
@@ -8228,8 +8232,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 %
 % Read recursive and nonrecursive macro bodies. (They're different since
 % rec and nonrec macros end differently.)
-% 
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro 
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
 % body to be transformed.
 % Set \macrobody to the body of the macro, and call \defmacro.
 %
@@ -8263,7 +8267,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % twice the \macarg.BLAH macros does not cost too much processing power.
 \def\parsemmanyargdef@@#1,{%
   \if#1;\let\next=\relax
-  \else 
+  \else
     \let\next=\parsemmanyargdef@@
     \edef\tempb{\eatspaces{#1}}%
     \expandafter\def\expandafter\tempa
@@ -8348,7 +8352,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 
 % Replace arguments by their values in the macro body, and place the result
 % in macro \@tempa.
-% 
+%
 \def\macvalstoargs@{%
   %  To do this we use the property that token registers that are \the'ed
   % within an \edef  expand only once. So we are going to place all argument
@@ -8372,9 +8376,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
   }
 
-% Define the named-macro outside of this group and then close this group. 
-% 
-\def\macargexpandinbody@{% 
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
   \expandafter
   \endgroup
   \macargdeflist@
@@ -8412,7 +8416,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 }
 
 % Trailing missing arguments are set to empty.
-% 
+%
 \def\setemptyargvalues@{%
   \ifx\paramlist\nilm@
     \let\next\macargexpandinbody@
@@ -8489,7 +8493,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \else % at most 9
     \ifnum\paramno<10\relax
       % @MACNAME sets the context for reading the macro argument
-      % @MACNAME@@ gets the argument, processes backslashes and appends a 
+      % @MACNAME@@ gets the argument, processes backslashes and appends a
       % comma.
       % @MACNAME@@@ removes braces surrounding the argument list.
       % @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8533,11 +8537,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % Call #1 with a list of tokens #2, with any doubled backslashes in #2
 % compressed to one.
 %
-% This implementation works by expansion, and not execution (so we cannot use 
-% \def or similar).  This reduces the risk of this failing in contexts where 
-% complete expansion is done with no execution (for example, in writing out to 
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar).  This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
 % an auxiliary file for an index entry).
-% 
+%
 % State is kept in the input stream: the argument passed to
 % @look_ahead, @gobble_and_check_finish and @add_segment is
 %
@@ -8559,11 +8563,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % #3 - NEXT_TOKEN
 % #4 used to look ahead
 %
-% If the next token is not a backslash, process the rest of the argument; 
+% If the next token is not a backslash, process the rest of the argument;
 % otherwise, remove the next token.
 @gdef@look_ahead#1!#2#3#4{%
   @ifx#4\%
-   @expandafter@gobble_and_check_finish 
+   @expandafter@gobble_and_check_finish
   @else
    @expandafter@add_segment
   @fi#1!{#2}#4#4%
@@ -8587,9 +8591,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % #3 - NEXT_TOKEN
 % #4 is input stream until next backslash
 %
-% Input stream is either at the start of the argument, or just after a 
-% backslash sequence, either a lone backslash, or a doubled backslash.  
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish, 
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
 % finish; otherwise, append to ARG_RESULT the segment of the argument up until
 % the next backslash.  PENDING_BACKSLASH contains a backslash to represent
 % a backslash just before the start of the input stream that has not been
@@ -8601,13 +8605,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   % append the pending backslash to the result, followed by the next segment
   @expandafter@is_fi@look_ahead#1#2#4!{\}@fi
   % this @fi is discarded by @look_ahead.
-  % we can't get rid of it with \expandafter because we don't know how 
+  % we can't get rid of it with \expandafter because we don't know how
   % long #4 is.
 }
 
 % #1 - THE_MACRO
 % #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the 
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
 % conditional.
 @gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
 
@@ -8619,7 +8623,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % for reading the argument (slightly different in the two cases).  Then,
 % to read the argument, in the whole-line case, it then calls the regular
 % \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-% 
+%
 \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
 \def\braceorlinexxx{%
   \ifx\nchar\bgroup
@@ -8673,7 +8677,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 
 % Used so that the @top node doesn't have to be wrapped in an @ifnottex
 % conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need 
+% \doignore goes to more effort to skip nested conditionals but we don't need
 % that here.
 \def\omittopnode{%
    \ifx\lastnode\wordTop
@@ -8681,7 +8685,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 }
 \def\wordTop{Top}
 
-% Until the next @node or @bye command, divert output to a box that is not 
+% Until the next @node or @bye command, divert output to a box that is not
 % output.
 \def\ignorenode{\setbox\dummybox\vbox\bgroup\def\node{\egroup\node}%
 \ignorenodebye
@@ -8748,7 +8752,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 % automatically in xrefs, if the third arg is not explicitly specified.
 % This was provided as a "secret" @set xref-automatic-section-title
 % variable, now it's official.
-% 
+%
 \parseargdef\xrefautomaticsectiontitle{%
   \def\temp{#1}%
   \ifx\temp\onword
@@ -8764,7 +8768,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \fi\fi
 }
 
-% 
+%
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
 % node name, #4 the name of the Info file, #5 the name of the printed
@@ -8917,24 +8921,24 @@ might help (with 'rm \jobname.?? \jobname.??s')%
     \fi
   \else
     % node/anchor (non-float) references.
-    % 
+    %
     % If we use \unhbox to print the node names, TeX does not insert
     % empty discretionaries after hyphens, which means that it will not
     % find a line break at a hyphen in a node names.  Since some manuals
     % are best written with fairly long node names, containing hyphens,
     % this is a loss.  Therefore, we give the text of the node name
     % again, so it is as if TeX is seeing it for the first time.
-    % 
+    %
     \ifdim \wd\printedmanualbox > 0pt
       % Cross-manual reference with a printed manual name.
-      % 
+      %
       \crossmanualxref{\cite{\printedmanual\unskip}}%
     %
     \else\ifdim \wd\infofilenamebox > 0pt
       % Cross-manual reference with only an info filename (arg 4), no
       % printed manual name (arg 5).  This is essentially the same as
       % the case above; we output the filename, since we have nothing else.
-      % 
+      %
       \crossmanualxref{\code{\infofilename\unskip}}%
     %
     \else
@@ -8970,20 +8974,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
 \endgroup}
 
 % Output a cross-manual xref to #1.  Used just above (twice).
-% 
+%
 % Only include the text "Section ``foo'' in" if the foo is neither
 % missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
 % "see The Foo Manual", the idea being to refer to the whole manual.
-% 
+%
 % But, this being TeX, we can't easily compare our node name against the
 % string "Top" while ignoring the possible spaces before and after in
 % the input.  By adding the arbitrary 7sp below, we make it much less
 % likely that a real node name would have the same width as "Top" (e.g.,
 % in a monospaced font).  Hopefully it will never happen in practice.
-% 
+%
 % For the same basic reason, we retypeset the "Top" at every
 % reference, since the current font is indeterminate.
-% 
+%
 \def\crossmanualxref#1{%
   \setbox\toprefbox = \hbox{Top\kern7sp}%
   \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9060,9 +9064,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \fi
 }
 
-% This is the macro invoked by entries in the aux file.  Define a control 
-% sequence for a cross-reference target (we prepend XR to the control sequence 
-% name to avoid collisions).  The value is the page number.  If this is a float 
+% This is the macro invoked by entries in the aux file.  Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions).  The value is the page number.  If this is a float
 % type, we have more work to do.
 %
 \def\xrdef#1#2{%
@@ -9078,10 +9082,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \bgroup
     \expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
   \egroup
-  % We put the \gdef inside a group to avoid the definitions building up on 
-  % TeX's save stack, which can cause it to run out of space for aux files with 
+  % We put the \gdef inside a group to avoid the definitions building up on
+  % TeX's save stack, which can cause it to run out of space for aux files with
   % thousands of lines.  \gdef doesn't use the save stack, but \csname does
-  % when it defines an unknown control sequence as \relax. 
+  % when it defines an unknown control sequence as \relax.
   %
   % Was that xref control sequence that we just defined for a float?
   \expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -9402,7 +9406,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   \fi\fi
   %
   \ifimagevmode
-    \nobreak\medskip
+    \medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
     % above and below.
@@ -9440,7 +9444,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
   %
   \ifimagevmode
     \medskip  % space after a standalone image
-  \fi  
+  \fi
   \ifx\centersub\centerV \egroup \fi
 \endgroup}
 
@@ -10271,7 +10275,7 @@ directory should work if nowhere else does.}
         \uppercase{.}
       \endgroup
     \else
-      \errhelp = \EMsimple	
+      \errhelp = \EMsimple
       \errmessage{Unicode character U+#1 not supported, sorry}%
     \fi
   \else
@@ -10304,7 +10308,7 @@ directory should work if nowhere else does.}
     \countUTFz = "#1\relax
     \begingroup
       \parseXMLCharref
-    
+
       % Give \u8:... its definition.  The sequence of seven \expandafter's
       % expands after the \gdef three times, e.g.
       %
@@ -10316,7 +10320,7 @@ directory should work if nowhere else does.}
       \expandafter\expandafter
       \expandafter\expandafter
       \expandafter\gdef       \UTFviiiTmp{#2}%
-      % 
+      %
       \expandafter\ifx\csname uni:#1\endcsname \relax \else
        \message{Internal error, already defined: #1}%
       \fi
@@ -10355,7 +10359,7 @@ directory should work if nowhere else does.}
     \divide\countUTFz by 64
     \countUTFy = \countUTFz  % Save to be the future value of \countUTFz.
     \multiply\countUTFz by 64
-    
+
     % \countUTFz is now \countUTFx with the last 5 bits cleared.  Subtract
     % in order to get the last five bits.
     \advance\countUTFx by -\countUTFz
@@ -10390,7 +10394,7 @@ directory should work if nowhere else does.}
 % U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
 % U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
 % U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-% 
+%
 % Many of our renditions are less than wonderful, and all the missing
 % characters are available somewhere.  Loading the necessary fonts
 % awaits user request.  We can't truly support Unicode without
@@ -11442,7 +11446,7 @@ directory should work if nowhere else does.}
 \def\texinfochars{%
   \let< = \activeless
   \let> = \activegtr
-  \let~ = \activetilde 
+  \let~ = \activetilde
   \let^ = \activehat
   \setregularquotes
   \let\b = \strong
@@ -11599,11 +11603,9 @@ directory should work if nowhere else does.}
 @setregularquotes
 
 @c Local variables:
-@c eval: (add-hook 'before-save-hook 'time-stamp)
+@c eval: (add-hook 'before-save-hook 'time-stamp nil t)
+@c time-stamp-pattern: "texinfoversion{%Y-%02m-%02d.%02H}"
 @c page-delimiter: "^\\\\message\\|emacs-page"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
 @c End:
 
 @c vim:sw=2: