summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2020-02-24 14:22:46 +0000
committerKarl Berry <karl@freefriends.org>2020-02-24 14:22:46 +0000
commitef9ef1814cdd4608fd5602d2f3b9095fd2ff7e95 (patch)
treea60013c0b1521a15748163154de3fcbc069b1824 /Master/texmf-dist/source
parent949db584c145675903a343057914122d1f0f5029 (diff)
ntgclass (23feb20)
git-svn-id: svn://tug.org/texlive/trunk@53882 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/ntgclass/ntgclass.dtx4
-rw-r--r--Master/texmf-dist/source/latex/ntgclass/rapport.dtx3560
-rw-r--r--Master/texmf-dist/source/latex/ntgclass/wijzer.dtx3560
3 files changed, 2 insertions, 7122 deletions
diff --git a/Master/texmf-dist/source/latex/ntgclass/ntgclass.dtx b/Master/texmf-dist/source/latex/ntgclass/ntgclass.dtx
index b8322eb68f5..3c906338dee 100644
--- a/Master/texmf-dist/source/latex/ntgclass/ntgclass.dtx
+++ b/Master/texmf-dist/source/latex/ntgclass/ntgclass.dtx
@@ -59,7 +59,7 @@
%<*driver>
\ProvidesFile{ntgclass.drv}
%</driver>
- [2020/02/22 v2.1c
+ [2020/02/22 v2.1d
%<artikel|rapport|boek> NTG LaTeX document class]
%<10pt|11pt|12pt> NTG LaTeX file (size option)]
% \end{macrocode}
@@ -5399,4 +5399,4 @@
% \Finale
%
\endinput
-% \ No newline at end of file
+%
diff --git a/Master/texmf-dist/source/latex/ntgclass/rapport.dtx b/Master/texmf-dist/source/latex/ntgclass/rapport.dtx
deleted file mode 100644
index 9033f939acb..00000000000
--- a/Master/texmf-dist/source/latex/ntgclass/rapport.dtx
+++ /dev/null
@@ -1,3560 +0,0 @@
-% \CheckSum{0}
-%
-%
-% \iffalse
-%<*dtx>
-\Providesfile{wijzer.dtx}
-%</dtx>
-%<class>\NeedsTeXFormat{LaTeX2e}
-%<class>\ProvidesClass{wijzer}
-%<driver>\ProvidesFile{wijzer.drv}
-%\Providesfile{wijzer.dtx}
- [PTT Research computer handboeken]
-%
-%<*driver>
-\documentclass{ptt-ltxdoc}
-\usepackage[dutch]{babel}
-\CodelineNumbered
-\CodelineIndex
-\EnableCrossrefs
-\DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
-\DoNotIndex{\@centercr,\@cite}
-\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
-\DoNotIndex{\@input,\@ixpt,\@m}
-\DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
-\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
-\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
-\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
-\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
-\DoNotIndex{\advance,\Alph,\alph}
-\DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
-\DoNotIndex{\bullet}
-\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
-\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
-\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
-\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
-\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
-\DoNotIndex{\fbox}
-\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
-\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
-\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
-\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
-\DoNotIndex{\input}
-\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
-\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
-\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
-\DoNotIndex{\NeedsTeXFormat,\newdimen}
-\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
-\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
-\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
-\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
-\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
-\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
-\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
-\DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
-\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
-\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
-\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
-\DoNotIndex{\viipt,\vipt,\vskip,\vspace}
-\DoNotIndex{\wd,\xiipt,\year,\z@}
-\newcommand{\m}[1]{\mbox{$\langle$\it #1\/$\rangle$}}
-\providecommand{\marg}[1]{{\ttfamiliy\char`\{}\m{#1}{\ttfamiliy\char`\}}}
-\providecommand{\oarg}[1]{{\ttfamiliy[}\m{#1}{\ttfamiliy]}}
-\begin{document}
-\DocInput{wijzer.dtx}
-\clearpage
-\PrintIndex
-\end{document}
-%</driver>
-% \fi
-%
-% \GetFileInfo{wijzer.dtx}
-% \title{Document Class \texttt{wijzer}}
-% \author{Johannes Braams}
-% \date{Version~\fileversion, dated~\filedate}
-% \maketitle
-% \tableofcontents
-% \clearpage
-%
-% \StopEventually{} ^^A
-%
-% \section{Introduction}
-%
-% \section{The {\sc docstrip} modules}
-%
-% The following modules are used in the implementation to direct
-% {\sc docstrip} in generating the external files:
-% \begin{center}
-% \begin{tabular}{ll}
-% class & produce the document class\\
-% type1 & produce the `1' variants of the classes\\
-% type3 & produce the `3' variants of the classes\\
-% driver & produce a documentation driver file \\
-% \end{tabular}
-% \end{center}
-%
-% \section{Initial Code}
-%
-% In this part we define a few commands that are used later on.
-%
-% \begin{macro}{\@ptsize}
-% This control sequence is used to store the second digit of the
-% pointsize we are typesetting in. So, normally, it's value is one
-% of 0, 1 or 2.
-% \begin{macrocode}
-%<*class>
-\newcommand\@ptsize{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@restonecol}
-% When the document has to printed in two columns, we sometimes
-% have to temporarily switch to one column. This switch is used to
-% remember to switch back.
-% \begin{macrocode}
-\newif\if@restonecol
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@titlepage}
-% A switch to indicate if a titlepage has to be produced.
-% \begin{macrocode}
-\newif\if@titlepage
-\@titlepagetrue
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@openright}
-% A switch to indicate if chapters must start on a right-hand page.
-% The default for the report class is no; for the book class it's
-% yes.
-% \begin{macrocode}
-\newif\if@openright
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@openbib}
-% A switch to indicate if the bibliography has to be produced in
-% the ``open'' format. The default is to use a ``closed'' format.
-% \begin{macrocode}
-\newif\if@openbib
-\@openbibfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@oldtoc}
-% A switch to indicate if `old' layout of the table of contents
-% should be produced. These document classes normally produce a
-% table of contents that looks quite different from what the
-% standard classes produce.
-% \begin{macrocode}
-\newif\if@oldtoc
-\@oldtocfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@allcaps}
-% By default the text on the titlepage is set in capital letters.
-% This can be disabled by the option \Lopt{mctitle}, which sets the
-% switch |\if@allcaps| to false.
-% \begin{macrocode}
-\newif\if@allcaps
-% \end{macro}
-%
-% \begin{macro}{\if@titlecentered}
-% In the document classes \file{wijzer3} the
-% default placement of the title that is produced by |\maketitle|
-% is flushleft. This can be changed by the switch
-% |\if@titlecentered|.
-% \begin{macrocode}
-%<+type3>\newif\if@titlecentered
-%<+type3>\@titlecenteredfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@revlabel}
-% These document classes need to be able to change the positioning
-% of the label in labeled lists. This switch is used for that
-% purpose.
-% \begin{macrocode}
-\newif\if@revlabel
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Declaration of Options}
-%
-%
-% \subsection{Setting Paper Sizes}
-%
-% The variables |\paperwidth| and |\paperheight| should reflect the
-% physical paper size after trimming. For desk printer output this
-% is usually the real paper size since there is no post-processing.
-% Classes for real book production will probably add other paper
-% sizes and additionally the production of crop marks for trimming.
-% \begin{macrocode}
-\DeclareOption{a4paper}
- {\setlength\paperheight {297mm}%
- \setlength\paperwidth {210mm}}
-\DeclareOption{a5paper}
- {\setlength\paperheight {210mm}%
- \setlength\paperwidth {148mm}}
-\DeclareOption{b5paper}
- {\setlength\paperheight {250mm}%
- \setlength\paperwidth {176mm}}
-\DeclareOption{letterpaper}
- {\setlength\paperheight {11in}%
- \setlength\paperwidth {8.5in}}
-\DeclareOption{legalpaper}
- {\setlength\paperheight {14in}%
- \setlength\paperwidth {8.5in}}
-\DeclareOption{executivepaper}
- {\setlength\paperheight {10.5in}%
- \setlength\paperwidth {7.25in}}
-% \end{macrocode}
-%
-% The option \Lopt{landscape} switches the values of |\paperheight|
-% and |\paperwidth|, assuming the dimensions wer given for portrait
-% paper.
-% \begin{macrocode}
-\DeclareOption{landscape}
- {\setlength\@tempdima {\paperheight}%
- \setlength\paperheight {\paperwidth}%
- \setlength\paperwidth {\@tempdima}}
-% \end{macrocode}
-%
-% \subsection{Choosing the type size}
-%
-% The type size options are handled by defining |\@ptsize| to contain
-% the last digit of the size in question and branching on |\ifcase|
-% statements. This is done for historical reasons to stay compatible
-% with other packages that use the |\@ptsize| variable to select
-% special actions. It makes the declarations of size options less
-% than 10pt difficult, although one can probably use \texttt{9}
-% and \texttt{8} assuming that a class won't define both
-% \Lopt{8pt} and \Lopt{18pt} options.
-%
-% \begin{macrocode}
-\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
-\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
-\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
-% \end{macrocode}
-%
-%
-% \subsection{Two-side or one-side printing}
-%
-% For two-sided printing we use the switch |\if@twoside|. In
-% addition we have to set the |\if@mparswitch| to get any margin
-% paragraphs into the outside margin.
-% \begin{macrocode}
-\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
-\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
-% \end{macrocode}
-%
-%
-% \subsection{Draft option}
-%
-% If the user requests \Lopt{draft} we show any overfull boxes.
-% We could probably add some more interesting stuff to this option.
-% \begin{macrocode}
-\DeclareOption{draft}{\setlength\overfullrule{5pt}}
-\DeclareOption{final}{\setlength\overfullrule{0pt}}
-% \end{macrocode}
-%
-% \subsection{Titlepage option}
-% An article usually has no separate titlepage, but the user can
-% request one.
-% \begin{macrocode}
-\DeclareOption{titlepage}{\@titlepagetrue}
-\DeclareOption{notitlepage}{\@titlepagefalse}
-% \end{macrocode}
-%
-% \subsection{openright option}
-% This option determines whether or not a chapter must start on
-% a right-hand page
-% request one.
-% \begin{macrocode}
-\DeclareOption{openright}{\@openrighttrue}
-\DeclareOption{openany}{\@openrightfalse}
-% \end{macrocode}
-%
-% For these document classes there used to be a file
-% \file{voorwerk.sty} which was a replacement for
-% \file{titlepag.sty}. Therefore we also have the option
-% \Lopt{voorwerk}.
-% \begin{macrocode}
-\DeclareOption{voorwerk}{\@titlepagetrue}
-\DeclareOption{geenvoorwerk}{\@titlepagefalse}
-% \end{macrocode}
-%
-%
-% \subsection{Table of contents formatting}
-%
-% This document class uses a new layout for the table of contents,
-% but in order to maintain compatibility with the standard \LaTeXe
-% document classes we supply an extra option: \Lopt{oldtoc}. If
-% this option is specified the switch |\if@oldtoc| will be set
-% true.
-% \begin{macrocode}
-\DeclareOption{oldtoc}{\@oldtoctrue}
-% \end{macrocode}
-%
-% \subsection{Formatting of the title}
-%
-% The option \Lopt{titlecentered} changes the behaviour of the
-% |\maketitle| command. It then produces a title like it does for
-% the \file{artikel1} document class.
-% \begin{macrocode}
-%<+type3>\DeclareOption{titlecentered}{\@titlecenteredtrue}
-% \end{macrocode}
-%
-% In this document class the titlepage uses all capital
-% letters. The option \Lopt{mctitle} (for `mixed case') prevents
-% this.
-% \begin{macrocode}
-\DeclareOption{mctitle}{\@allcapsfalse}
-\DeclareOption{uctitle}{\@allcapstrue}
-% \end{macrocode}
-%
-% \subsection{Twocolumn printing}
-%
-% Two-column and one-column printing is again realized via a switch.
-% \begin{macrocode}
-\DeclareOption{onecolumn}{\@twocolumnfalse}
-\DeclareOption{twocolumn}{\@twocolumntrue}
-% \end{macrocode}
-%
-% \subsection{Equation numbering on the left}
-%
-% The option \Lopt{leqno} can be used to get the equation numbers
-% on the left side of the equation.
-% \begin{macrocode}
-\DeclareOption{leqno}{\input{leqno.clo}}
-% \end{macrocode}
-%
-% \subsection{Flush left displays}
-%
-% The option \Lopt{fleqn} redefines the displayed math environmens
-% in such a way that they come out flush left, with an indentation
-% of |\mathindent| from the prevailing left margin.
-% \begin{macrocode}
-\DeclareOption{fleqn}{\input{fleqn.clo}}
-% \end{macrocode}
-%
-% \subsection{Open bibliography}
-%
-% The option \Lopt{openbib} produces the ``open'' bibliography
-% style, in which each block starts on a new line, and succeeding
-% lines in a block are indented by |\bibindent|.
-% \begin{macrocode}
-\DeclareOption{openbib}{\@openbibtrue}
-% \end{macrocode}
-%
-%
-% \section{Executing Options}
-%
-% Here we execute the default options to initialize certain
-% variables.
-% \begin{macrocode}
-\ExecuteOptions{a4paper,10pt,oneside,onecolumn,final,uctitle,openany}
-% \end{macrocode}
-%
-% The |\ProcessOptions| command causes the execution of the code
-% for every option \Lopt{FOO}
-% which is declared and for which the user typed
-% the \Lopt{FOO} option in his
-% |\documentclass| command. For every option \Lopt{BAR} he typed,
-% which is not declared, the option is assumed to be a global option.
-% All options will be passed as document options to any
-% |\usepackage| command in the document preamble.
-% \begin{macrocode}
-\ProcessOptions
-% \end{macrocode}
-% Now that all the options have been executed we can load the
-% chosen class option file that contains all size dependent code.
-% \begin{macrocode}
-\input{ntg1\@ptsize.clo}
-% \end{macrocode}
-%
-% \section{Loading Packages}
-%
-% These class files do not load additional packages.
-%
-%
-% \section{Document Layout}
-% \label{sec:maincode}
-%
-% In this section we are finally dealing with the nasty typographical
-% details.
-%
-% \subsection{Paragraphing}
-%
-% \begin{macro}{\lineskip}
-% \begin{macro}{\normallineskip}
-% These parameters control \TeX's behaviour when two lines tend to
-% come too close together.
-% \begin{macrocode}
-\setlength\lineskip{1\p@}
-\setlength\normallineskip{1\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\baselinestretch}
-% This is used as a multiplier for |\baselineskip|. The default is
-% to {\em not\/} stretch the baselines.
-% \begin{macrocode}
-\renewcommand\baselinestretch{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\unitindent}
-% These document classes all use a single dimension for a number of
-% layout parameters:
-% \begin{itemize}
-% \item the label width in section heading,
-% \item the |\parindent|
-% \item the footnote label indent (= half |\unitindent|)
-% \item listindent on the first level
-% \end{itemize}
-% \begin{macrocode}
-\newdimen\unitindent
-% \end{macrocode}
-% The default setting accomodates three levels of single digit
-% section numbering.
-% \begin{macrocode}
-{\setbox0\hbox{\normalsize\rmfamily 2.2.2\hskip.5em}
- \global\unitindent=\wd0}
-% \end{macrocode}
-%
-% \begin{macro}{\othermargin}
-% Other indentations are maximal label width plus white space.
-% \begin{macrocode}
-\newdimen\othermargin
-{\setbox0\hbox{\normalsize (m)\hskip.6em}\global\othermargin=\wd0}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{if@needwriteindent}
-% If this is not enough, a new width is calculated, set, and the
-% file{.aux} file contains an instruction that will set
-% |\unitindent| on the next run.
-%
-% For this we need a switch
-% \begin{macrocode}
-\newif\if@needwriteindent
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@indentset}
-% And a command that sets the various parameters.
-% \begin{macrocode}
-\newcommand\@indentset{%
-%<-type3> \global\parindent=\unitindent
- \global\leftmargini=\unitindent
- \global\@needwriteindenttrue}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@writeindent}
-% The |\end{document}| command will call |\@writeindent| to write
-% the final width of |\unitindent| on the \file{.aux} file. Also a
-% command is written to set |\unitindent|. To be compatible with
-% other document classes a check is written to the \file{.aux} file
-% for the existence of |\unitindent|. This prevents nasty errors
-% when another document class is used.
-% \begin{macrocode}
-\newcommand\@writeindent[1]{\immediate\write\@mainaux
- {\string\@ifundefined{unitindent}{\string\newdimen\string\unitindent
- \let\string\@indentset\relax}{}}
- \immediate\write\@mainaux{\global\string\unitindent=#1\string\relax
- \string\@indentset \string\relax}}
-% \end{macrocode}
-% \end{macro}
-%
-% We need to use the hook into |\end{document}| to write the final
-% value of |\unitindent| om the file{.aux} file for the next run.
-% \begin{macrocode}
-\AtEndDocument{%
- \if@filesw
- \if@needwriteindent
- \@writeindent{\the\unitindent}
- \fi
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\parskip}
-% \begin{macro}{\parindent}
-% |\parskip| gives extra vertical space between paragraphs and
-% |\parindent| is the width of the paragraph indentation. The value
-% of |\parindent| depends on whether we are in two column mode.
-% \begin{macrocode}
-%<*type1>
-\setlength\parskip{0\p@}
-\setlength\parindent{\unitindent}
-%</type1>
-%<*type3>
-\setlength\parskip{.5\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip}
-\setlength\parindent{\z@}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@lowpenalty}
-% \begin{macro}{\@medpenalty}
-% \begin{macro}{\@highpenalty}%
-% The commands |\nopagebreak| and |\nolinebreak| put in penalties
-% to discourage these breaks at the point they are put in.
-% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|,
-% dependent on their argument.
-% \begin{macrocode}
-\@lowpenalty 51
-\@medpenalty 151
-\@highpenalty 301
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\clubpenalty}
-% \begin{macro}{\widowpenalty}
-% These penalties are use to discourrage club and widow lines.
-% Because we use their default values we only show them here,
-% commented out.
-% \begin{macrocode}
-% \clubpenalty 150
-% \widowpenalty 150
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\displaywidowpenalty}
-% \begin{macro}{\predisplaypenalty}
-% \begin{macro}{\postdisplaypenalty}
-% Discourrage (but not so much) widows in front of a math display
-% and forbid breaking directly in front of a display. Allow break
-% after a display without a penalty. Again the default values are
-% used, therefore we only show them here.
-% \begin{macrocode}
-% \displaywidowpenalty 50
-% \predisplaypenalty 10000
-% \postdisplaypenalty 0
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\interlinepenalty}
-% Allow the breaking of a page in the middle of a paragraph.
-% \begin{macrocode}
-% \interlinepenalty 0
-% \end{macrocode}
-% \end{macro}
-%
-%
-% \begin{macro}{\brokenpenalty}
-% We allow the breaking of a page after a hyphenated line.
-% \begin{macrocode}
-% \brokenpenalty 0
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Float placement parameters}
-%
-% All float parameters are given default values in the \LaTeXe{}
-% kernel. For this reason counters only need to be set with
-% |\setcounter| and other parameters are set using |\renewcommand|.
-%
-% \paragraph{Limits for the placement of floating objects}
-%
-% \begin{macro}{\c@topnumber}
-% The \Lcount{topnumber} counter holds the maximum number of
-% floats that can appear on the top of a text page.
-% \begin{macrocode}
-\setcounter{topnumber}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\topfraction}
-% This indicates the maximum part of a text page that can be
-% occupied by floats at the top.
-% \begin{macrocode}
-\renewcommand\topfraction{.7}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@bottomnumber}
-% The \Lcount{bottomnumber} counter holds the maximum number of
-% floats that can appear on the bottom of a text page.
-% \begin{macrocode}
-\setcounter{bottomnumber}{1}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\bottomfraction}
-% This indicates the maximum part of a text page that can be
-% occupied by floats at the bottom.
-% \begin{macrocode}
-\renewcommand\bottomfraction{.3}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@totalnumber}
-% This indicates the maximum number of floats that can appear on
-% any text page.
-% \begin{macrocode}
-\setcounter{totalnumber}{3}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\textfraction}
-% This indicates the minimum part of a text page that has to be
-% occupied by text.
-% \begin{macrocode}
-\renewcommand\textfraction{.2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\floatpagefraction}
-% This indicates the minimum part of a page that has to be
-% occupied by floating objects before a `float page' is produced.
-% \begin{macrocode}
-\renewcommand\floatpagefraction{.5}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@dbltopnumber}
-% The \Lcount{dbltopnumber} counter holds the maximum number of
-% two column floats that can appear on the top of a two column text
-% page.
-% \begin{macrocode}
-\setcounter{dbltopnumber}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\dbltopfraction}
-% This indicates the maximum part of a two column text page that
-% can be occupied by two column floats at the top.
-% \begin{macrocode}
-\renewcommand\dbltopfraction{.7}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\dblfloatpagefraction}
-% This indicates the minimum part of a page that has to be
-% occupied by two column wide floating objects before a `float
-% page' is produced.
-% \begin{macrocode}
-\renewcommand\dblfloatpagefraction{.5}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Page Styles}
-%
-% The page style \pstyle{foo} is defined by defining the command
-% |\ps@foo|. This command should make only local definitions.
-% There should be no stray spaces in the definition, since they
-% could lead to mysterious extra spaces in the output (well, that's
-% something that should be always avoided).
-%
-% \begin{macro}{\@evenhead}
-% \begin{macro}{\@oddhead}
-% \begin{macro}{\@evenfoot}
-% \begin{macro}{\@oddfoot}
-% The |\ps@...| command defines the macros |\@oddhead|,
-% |\@oddfoot|, |\@evenhead|, and |\@evenfoot| to define the running
-% heads and feet---e.g., |\@oddhead| is the macro to produce the
-% contents of the heading box for odd-numbered pages. It is called
-% inside an |\hbox| of width |\textwidth|.
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\thispagestyle}
-% Several commands (|\index|, |\maketitle|) give a
-% |\thispagestyle{plain}| command, which will overrule a
-% |\pagestyle{empty}| command. This situation is almost always
-% unwanted. Therefore we provide a more careful definition.
-%
-% First save the original definition.
-% \begin{macrocode}
-\let\Thispagestyle\thispagestyle
-% \end{macrocode}
-% Then we provide the new definition, for which we must also adapt
-% |\pagestyle| a little.
-% \begin{macrocode}
-\newcommand\@emptypagestyle{empty}
-\renewcommand\pagestyle[1]{\@nameuse{ps@#1}\def\@currentpagestyle{#1}}
-\renewcommand\thispagestyle[1]{%
- \ifx\@currentpagestyle\@emptypagestyle
- \else
- \global\@specialpagetrue
- \gdef\@specialstyle{#1}%
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Marking conventions}
-%
-% To make headings determined by the sectioning commands, the page
-% style defines the commands |\chaptermark|, |\sectionmark|,
-% \ldots,\\
-% where |\chaptermark{|\meta{TEXT}|}| is called by
-% |\chapter| to set a mark, and so on.
-%
-% The |\...mark| commands and the |\...head| macros are defined
-% with the help of the following macros. (All the |\...mark|
-% commands should be initialized to no-ops.)
-%
-% \LaTeX{} extends \TeX's |\mark| facility by producing two kinds
-% of marks, a `left' and a `right' mark, using the following
-% commands:
-% \begin{flushleft}
-% |\markboth{|\meta{LEFT}|}{|\meta{RIGHT}|}|: Adds both marks.
-%
-% |\markright{|\meta{RIGHT}|}|: Adds a `right' mark.
-%
-% |\leftmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
-% or |\@evenfoot| macros, it gets the current `left'
-% mark. |\leftmark| works like \TeX's |\botmark|
-% command.
-%
-% |\rightmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
-% or |\@evenfoot| macros, it gets the current
-% `right' mark. |\rightmark| works like \TeX's
-% |\firstmark| command.
-% \end{flushleft}
-%
-% The marking commands work reasonably well for right marks
-% `numbered within' left marks--e.g., the left mark is changed by a
-% |\chapter| command and the right mark is changed by a |\section|
-% command. However, it does produce somewhat anomalous results if
-% two |\markboth|'s occur on the same page.
-%
-%
-% Commands like |\tableofcontents| that should set the marks in some
-% page styles use a |\@mkboth| command, which is |\let| by the
-% pagestyle command (|\ps@...|) to |\markboth| for setting the
-% heading or to |\@gobbletwo| to do nothing.
-%
-%
-% \begin{macrocode}
-% %%%\mark{{}{}} % Initializes TeX's marks <--- can vanish
-% \end{macrocode}
-%
-% \subsubsection{Defining the page styles}
-% \label{sec:pagestyle}
-%
-% The pagestyle \pstyle{empty} is defined in \file{latex.dtx}, but
-% the pagestyle \pstyle{plain} is slightly altered here. The
-% difference is that the page numbers are set flush right in
-% onesided and flush left and right in the twosided style.
-%
-% \begin{macro}{\ps@plain}
-%
-% \begin{macrocode}
-\renewcommand\ps@plain{%
-% \end{macrocode}
-% The running head are empty in this pagestyle, the page number
-% appears in the running foot.
-% \begin{macrocode}
- \let\@oddhead\@empty\let\@evenhead\@empty
- \def\@oddfoot{\hfil\PageFont\thepage}%
- \if@twoside
- \def\@evenfoot{\PageFont\thepage\hfil}%
- \else
- \let\@evenfoot\@oddfoot
- \fi
-% \end{macrocode}
-% Because the running heads should be empty we |let| |\@mkboth| to
-% |\@gobbletwo|, thus disabling the mark commands.
-% \begin{macrocode}
- \let\@mkboth\@gobbletwo}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ps@headings}
-% The definition of the page style \pstyle{headings} has to be
-% different for two sided printing than it is for one sided
-% printing.
-%
-% \begin{macrocode}
-\if@twoside
- \def\ps@headings{%
-% \end{macrocode}
-% The running feet are empty in this page style, the running head
-% contains the page number and one of the marks.
-% \begin{macrocode}
- \let\@oddfoot\@empty\let\@evenfoot\@empty
- \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}%
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
-% \end{macrocode}
-%
-% When using this page style, the contents of the running head is
-% determined by the chapter and section titles. So we |\let|
-% |\@mkboth| to |\markboth|.
-% \begin{macrocode}
- \let\@mkboth\markboth
-% \end{macrocode}
-%
-% In thisdocument class we use the |\chaptermark|
-% and |\sectionmark| macros to fill the running heads.
-%
-% Note the use of |##1| for the parameter of the |\chaptermark|
-% command, which will be defined when |\ps@headings| is executed.
-%
-% \begin{macrocode}
- \def\chaptermark##1{%
- \markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne
- \@chapapp\ \thechapter. \ \fi
- ##1}}{}}%
- \def\sectionmark##1{%
- \markright {\uppercase{\ifnum \c@secnumdepth >\z@
- \thesection. \ \fi
- ##1}}}}
-% \end{macrocode}
-%
-% The definition of |\ps@headings| for one sided printing can be
-% much simpler, because we treat even and odd pages the same.
-% Therefore we don't need to define |\@even...|.
-% \begin{macrocode}
-\else
- \def\ps@headings{%
- \let\@oddfoot\@empty
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
- \let\@mkboth\markboth
-% \end{macrocode}
-% We use |\markright| now instead of |\markboth| as we did for two
-% sided printing.
-% \begin{macrocode}
- \def\chaptermark##1{%
- \markright {\uppercase{\ifnum \c@secnumdepth >\m@ne
- \@chapapp\ \thechapter. \ \fi
- ##1}}}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ps@myheadings}
-% The definition of the page style \pstyle{myheadings} is fairly
-% simple because the user determines the contents of the running
-% head himself by using the |\markboth| and |\markright| commands.
-%
-% \begin{macrocode}
-\def\ps@myheadings{%
- \let\@oddfoot\@empty\let\@evenfoot\@empty
- \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}%
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
-% \end{macrocode}
-%
-% We have to make sure that the marking commands that are used by
-% the chapter and section headings are disabled. We do this
-% |\let|ting them to a macro that gobbles its argument(s).
-% \begin{macrocode}
- \let\@mkboth\@gobbletwo
- \let\chaptermark\@gobble
- \let\sectionmark\@gobble
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\PageFont}
-% \begin{macro}{\MarkFont}
-% These macros are use to store the fonts that are used to typeset
-% the pagenumber (|\PageFont|) and the marks (|\MarkFont|) in the
-% running head and feet.
-% \begin{macrocode}
-\newcommand\PageFont{\rmfamily}
-\newcommand\MarkFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\RunningFonts}
-% Use this macro to change the fonts that are used in the running
-% heads.
-% \begin{macrocode}
-\newcommand\RunningFonts[2]{%
- \renewcommand\PageFont{#1}\renewcommand\MarkFont{#2}}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Document Markup}
-%
-% \subsection{The title}
-%
-% \begin{macro}{\title}
-% \begin{macro}{\author}
-% \begin{macro}{\date}
-% These three macros are provided by \file{latex.dtx} to provide
-% information about the title, author(s) and date of the document.
-% The information is stored away in internal control sequences.
-% It is the task of the |\maketitle| command to use the
-% information provided. The definitions of these macros are shown
-% here for information.
-% \begin{macrocode}
-% \newcommand\title[1]{\gdef\@title{#1}}
-% \newcommand\author[1]{\gdef\@author{#1}}
-% \newcommand\date[1]{\gdef\@date{#1}}
-% \end{macrocode}
-% The |\date| macro gets today's date by default.
-% \begin{macrocode}
-% \gdef\@date{\today}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\TitleFont}
-% This selects the font to use in the title of the document.
-% \begin{macrocode}
-\newcommand\TitleFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\maketitle}
-% The definition of |\maketitle| depends on whether a seperate
-% title page is made. This is the default for this document class.
-% Note that the title, author and date information is printed in
-% capital letters by default. This can be changed by the option
-% \Lopt{mctitle}.
-%
-% When we are making a title page, we locally redefine
-% |\footnotesize| and |\footnoterule| to change the appearance of
-% the footnotes that are produced by the |\thanks| command.
-% \begin{macrocode}
-\renewcommand\TitleFont{\rmfamily}
-\newcommand\maketitle{%
- \begin{titlepage}%
- \let\footnotesize\small
- \let\footnoterule\relax
-% \end{macrocode}
-% Footnotes on the titlepage, generated by the use of |\thanks|,
-% use symbols in these document classes.
-% \begin{macrocode}
- \long\def\@makefntext##1{\parindent\z@
- \def\labelitemi{--}\@revlabeltrue
- \leavevmode$\m@th^{\@thefnmark}$\kern1em\relax ##1}
- \renewcommand\thefootnote{\fnsymbol{footnote}}%
-% \end{macrocode}
-% We center the entire title vertically; the centering is set off a
-% little by adding a |\vskip|. In compatibility mode the pagenumber
-% is set to 0 to keep the behaviour of \LaTeX\ 2.09 style files
-% \begin{macrocode}
- \if@compatibility\setcounter{page}{0}\fi
- \null\vfil
- \vskip 60\p@
-% \end{macrocode}
-% Then we set the title, in a |\LARGE| font; leave a little space
-% and set the author(s) in a |\large| font. We do this inside a
-% tabular environment to get them in a single column.
-% Before the date we leave a little whitespace again.
-% \begin{macrocode}
- \begin{center}%
- \TitleFont
- {\LARGE \def\\{\penalty -\@M}
- \if@allcaps
- \expandafter\uc@nothanks\@title\thanks\relax
- \else
- \@title
- \fi\par}%
- \vskip 3em%
- {\large
- \lineskip .75em \parindent\z@
- \begin{tabular}[t]{c}%
- \if@allcaps
- \expandafter\uc@authornothanks\@author\and\relax
- \else
- \@author
- \fi
- \end{tabular}\par}%
- \vskip 1.5em%
- {\large
- \if@allcaps
- \uppercase\expandafter{\@date}%
- \else
- \@date
- \fi\par}%
- \end{center}\par
-% \end{macrocode}
-% Then we call |\@thanks| to print the information that goes into
-% the footnote and finish the page.
-% \begin{macrocode}
- \@thanks
- \vfil\null
- \end{titlepage}%
-% \end{macrocode}
-% We reset the \Lcount{footnote} counter, disable |\thanks| and
-% |\maketitle| and save some storage space by emptying the internal
-% information macros.
-% \begin{macrocode}
- \setcounter{footnote}{0}%
- \let\thanks\relax\let\maketitle\relax
- \gdef\@thanks{}\gdef\@author{}\gdef\@title{}}
-% \end{macrocode}
-%
-% We want to have the title, author and date information in
-% uppercase, but we have to be very carefull not to put too much
-% text in uppercase. The macros that perform the filtering of texts
-% that shouldn't be in uppercase were developped with th help of
-% Howard Trickey.
-%
-% \begin{macro}{\uc@nothanks}
-% This macro takes all the text up to the first use of |\thanks|
-% and passes it to |\uppercase|. The use of |\futurelet| will store
-% the token \emph{after} the |\thanks| in |\@tempa|. The macro
-% |\u@tx| uses that information to determine what to do next.
-% \begin{macrocode}
-\def\uc@nothanks#1\thanks{\uppercase{#1}\futurelet\@tempa\uc@tx}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@authornothanks}
-% A document can have more than one author. Usually they are
-% seperated with |\and|. For each author a footnote --using
-% |\thanks| can be present. Therefore this macro takes all the text
-% up to the first use of |\and|, thus picking up all the
-% information for one author. This is than passsed to
-% |\uc@nothanks|, which checks for the presence of |\thanks|. For
-% this to work the argument of |\uc@nothanks| has to be delimited
-% by |\thanks\relax|.
-% \begin{macrocode}
-\def\uc@authornothanks#1\and{\uc@nothanks#1\thanks\relax
-% \end{macrocode}
-% Then we have to check whether the |\and| we ound earlier was put
-% in by the user, in which case information for another user will
-% follow, or by the call from another macro, in which case the
-% |\and| will be followed by a |\relax| token. The |\futurelet|
-% contstruct stores the first token \emph{after} the |\and| in
-% |\@tempa| to be inspected by |\u@ax|.
-% \begin{macrocode}
- \futurelet\@tempa\uc@ax}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@ax}
-% When |\@tempa| contains a |\relax| token nothing needs to be
-% done, when it doesn't we put in a linebreak |\\| the word `and'
-% (stored in |\andname| so that this control sequence can be
-% redeined for other languages), another linebreak and we call
-% |\uc@authornothanks| to continue processing. The |\expandafter|
-% lets \TeX\ see the |\fi| first.
-% \begin{macrocode}
-\def\uc@ax{%
- \ifx\@tempa\relax
- \else
- \\ \andname \\ \expandafter\uc@authornothanks
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@tx}
-% This macro simply checks whether |\@tempa| contains a |\relax|
-% token. When it doesn't further processing is performed by
-% |\u@ty|.
-% \begin{macrocode}
-\def\uc@tx{\ifx\@tempa\relax
- \else \expandafter\uc@ty \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@ty}
-% The macro |\uc@ty| gets executed when the |\thanks| that
-% delimited text earlier on in the processing had a real argument.
-% In that case it was a |\thanks| put in by the user, \emph{not} by
-% these macros. Therefore the argument is now passed to |\thanks|
-% and processing continues by calling |\uc@nothanks|.
-% \begin{macrocode}
-\def\uc@ty#1{\thanks{#1}\uc@nothanks}
-% \end{macrocode}
-% \end{macro}
-%
-% When the title is not on a page of its own, the layout of the
-% title is a little different. We use symbols to mark the footnotes
-% and we have to deal with two column documents.
-%
-% Therefore we first start a new group to keep changes local. Then
-% we redefine |\thefootnote| to use |\fnsymbol|; and change
-% |\@makefnmark| so that footnotemarks have zero width (to make the
-% centering of the author names look better). We also want raised
-% footnotemarkers in the footnotes here.
-% \begin{macrocode}
-\else
-\newcommand\maketitle{\par
- \begingroup
- \renewcommand\thefootnote{\fnsymbol{footnote}}%
- \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}%
- \def\@makefntext{\@xmakefntext{$\m@th^{\@thefnmark}$}}%
-% \end{macrocode}
-% If this is a twocolumn document we start a new page in twocolumn
-% mode, with the title set to the full width of the text. The
-% actual printing of the title information is left to
-% |\@maketitle|.
-% \begin{macrocode}
- \if@twocolumn
- \ifnum \col@number=\@ne
- \@maketitle
- \else
- \twocolumn[\@maketitle]%
- \fi
- \else
-% \end{macrocode}
-% When this is not a twocolumn document we just start a new page,
-% prevent floating objects from appearing on the top of this page
-% and print the title information.
-% \begin{macrocode}
- \newpage
- \global\@topnum\z@
- \@maketitle
- \fi
-% \end{macrocode}
-% This page gets a \pstyle{plain} layout. We call |\@thanks| to
-% produce the footnotes.
-% \begin{macrocode}
- \thispagestyle{plain}\@thanks
-% \end{macrocode}
-% Now we can close the group, reset the \Lcount{footnote} counter,
-% disable |\thanks|, |\maketitle| and |\@maketitle| and save some
-% storage space by emptying the internal information macros.
-% \begin{macrocode}
- \endgroup
- \setcounter{footnote}{0}%
- \let\thanks\relax
- \let\maketitle\relax\let\@maketitle\relax
- \gdef\@thanks{}\gdef\@author{}\gdef\@title{}}
-% \end{macrocode}
-%
-% \begin{macro}{\@maketitle}
-% This macro takes care of formatting the title information when we
-% have no seperate title page.
-%
-% We always start a new page, leave some white space and center the
-% information. The title is set in a |\LARGE| font, the author
-% names and the in a |\large| font.
-% \begin{macrocode}
-\def\@maketitle{%
- \newpage
- \null
- \vskip 2em%
-%<+type3>\if@titlecentered
- \begin{center}%
- {\LARGE \TitleFont \@title \par}%
- \vskip 1.5em%
- {\large \TitleFont
- \lineskip .5em%
- \begin{tabular}[t]{c}%
- \@author
- \end{tabular}\par}%
- \vskip 1em%
- {\large \TitleFont \@date}%
- \end{center}%
-%<*type3>
- \else
- {\LARGE \TitleFont \head@style \@title \par} \vskip 1.5em
- {\large \TitleFont \lineskip .5em \tabcolsep\z@
- \def\and{%%% \begin{tabular} has already started
- \end{tabular}\hskip 1em plus .17fil
- \begin{tabular}[t]{l}}%% \end{tabular} will come
- \begin{tabular}[t]{l}\@author\end{tabular}\par}
- \vskip 1em {\large \TitleFont \@date}
- \fi
-%</type3>
- \par
- \vskip 1.5em}
-\fi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsection{Chapters and Sections}
-%
-% \subsubsection{Building blocks}
-% The definitions in this part of the class file make use of two
-% macros, |\@startsection| and |\secdef|, which are defined by
-% \file{latex.dtx}. To understand what is going on here, we
-% describe their syntax.
-%
-% The macro |\@startsection| has 6 required arguments, optionally
-% followed by a $*$, an optional argument and a required argument:
-%
-% |\@startsection|\meta{name}\meta{level}\meta{indent}^^A
-% \meta{beforeskip}\meta{afterskip}\meta{style}
-% optional *\\
-% \null\hphantom{\bslash @startsection}^^A
-% |[|\meta{altheading}|]|\meta{heading}
-%
-% It is a generic command to start a section, the arguments have
-% the following meaning:
-%
-% \begin{description}
-% \item[\meta{name}] The name of the user level command, e.g.,
-% `section'.
-% \item[\meta{level}] A number, denoting the depth of the section
-% -- e.g., chapter=1, section = 2, etc. A section number
-% will be printed if and only if \meta{level} $<=$ the value
-% of the \Lcount{secnumdepth} counter.
-% \item[\meta{indent}] The indentation of the heading from the left
-% margin
-% \item[\meta{beforeskip}] The absolute value of this argument
-% gives the skip to leave above the heading. If it is
-% negative, then the paragraph indent of the text following
-% the heading is suppressed.
-% \item[\meta{afterskip}] If positive, this gives the skip to leave
-% below the heading, else it gives the skip to leave to the
-% right of a run-in heading.
-% \item[\meta{style}] Commands to set the style of the heading.
-% \item[$*$] When this is missing the heading is numbered and the
-% corresponding counter is incremented.
-% \item[\meta{altheading}] Gives an alternative heading to use in
-% the table of contents and in the running heads. This should
-% be present when the $*$ form is used.
-% \item[\meta{heading}] The heading of the new section.
-% \end{description}
-% A sectioning command is normally defined to |\@startsection| and
-% its first six arguments.
-%
-% The macro |\secdef| can be used when a sectioning command is
-% defined without using |\@startsection|. It has two arguments:
-%
-% |\secdef|\meta{unstarcmds}\meta{starcmds}
-%
-% \begin{description}
-% \item[\meta{unstarcmds}] Used for the normal form of the
-% sectioning command.
-% \item[\meta{starcmds}] Used for the $*$-form of the
-% sectioning command.
-% \end{description}
-%
-% You can use |\secdef| as follows:
-% \begin{verbatim}
-% \def\chapter { ... \secdef \CMDA \CMDB }
-% \def\CMDA [#1]#2{ ... } % Command to define
-% % \chapter[...]{...}
-% \def\CMDB #1{ ... } % Command to define
-% % \chapter*{...}
-% \end{verbatim}
-%
-% \begin{macro}{\head@style}
-% In the definition of chapter and section commands a number of
-% settings frequently occur. Therefore we store them in a control
-% sequence.
-%
-% Section headings are to be set extremely raggedright, with no
-% hyphenations, not even at explicit hyphens.
-%
-% \begin{macrocode}
-\newcommand\head@style{%
- \interlinepenalty \@M
- \hyphenpenalty=\@M \exhyphenpenalty=\@M
- \rightskip=0cm plus .7\hsize\relax}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@sect}
-% The definition of this macro from \file{latex.dtx} needs to be
-% repeated here because we want to modify its behaviour with
-% respect to:
-% \begin{enumerate}
-% \item the width of the number, which is fixed;
-% \item checking the value of |\unitindent|;
-% \item formatting the section title ragged right;
-% \item changing the argument of |\contentsline|.
-% \end{enumerate}
-% \begin{macrocode}
-\def\@sect#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth
- \let\@svsec\@empty\else
- \refstepcounter{#1}%
-% \end{macrocode}
-% The following code (within the group) checks the value of
-% |\unitindent|. If the sectionnumber is wider than |\unitindent|
-% its value is adapted and a flag is set to rememeber to store the
-% new value in the \file{.aux}-file.
-% \begin{macrocode}
- \begingroup
- \setbox\@tempboxa=\hbox{#6\relax
- \csname the#1\endcsname
- \hskip.5em}
- \ifdim\wd\@tempboxa>\unitindent
- \global\unitindent=\wd\@tempboxa
- \@indentset
- \fi
- \endgroup
- \let\@@protect\protect
- \def\protect{\noexpand\protect\noexpand}%
- \edef\@svsec{\@seccntformat{#1}}%
- \let\protect\@@protect\fi
- \@tempskipa #5\relax
- \ifdim \@tempskipa>\z@
- \begingroup #6\relax
- \@hangfrom{\hskip #3\relax\@svsec}{\head@style #8\par}%
- \endgroup
- \csname #1mark\endcsname{#7}%
- \addcontentsline{toc}{#1}{%
- \ifnum #2>\c@secnumdepth
- \else
- \protect\numberline{\csname the#1\endcsname}%
- \fi
- \toc@font#2 #7}%
- \else
- \def\@svsechd{#6\hskip #3\relax
- \@svsec #8\csname #1mark\endcsname{#7}%
- \addcontentsline{toc}{#1}{%
- \ifnum #2>\c@secnumdepth
- \else
- \protect\numberline{\csname the#1\endcsname}%
- \fi
- \toc@font#2 #7}}%
- \fi
- \@xsect{#5}}
-% \end{macrocode}
-% This macro was introduced in \LaTeXe, its definition is changed
-% here to get the fixed with of the section number.
-% \begin{macrocode}
-\def\@seccntformat#1{%
- \hbox to \unitindent{\csname the#1\endcsname \hfil}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@ssect}
-% Similar changes need to be made to the definition of |\@ssect|,
-% which is used in `starred' sections.
-% \begin{macrocode}
-\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax
- \ifdim \@tempskipa>\z@
- \begingroup #4\relax
- \@hangfrom{\hskip #1}{\head@style #5\par}\endgroup
- \else \def\@svsechd{#4\hskip #1\relax #5}\fi
- \@xsect{#3}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Mark commands}
-%
-% \begin{macro}{\chaptermark}
-% \begin{macro}{\sectionmark}
-% \begin{macro}{\subsectionmark}
-% \begin{macro}{\subsubsectionmark}
-% \begin{macro}{\paragraphmark}
-% \begin{macro}{\subparagraphmark}
-% Default initializations of |\...mark| commands. These commands
-% are used in the definition of the page styles (see
-% section~\ref{sec:pagestyle}) Most of them are already defined by
-% \file{latex.ltx}, so they are only shown here.
-%
-% \begin{macrocode}
-\newcommand\chaptermark[1]{}
-% \newcommand\sectionmark[1]{}
-% \newcommand\subsectionmark[1]{}
-% \newcommand\subsubsectionmark[1]{}
-% \newcommand\paragraphmark[1]{}
-% \newcommand\subparagraphmark[1]{}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Define Counters}
-%
-% \begin{macro}{\c@secnumdepth}
-% The value of the counter \Lcount{secnumdepth} gives the depth of
-% the highest-level sectioning command that is to produce section
-% numbers.
-% \begin{macrocode}
-\setcounter{secnumdepth}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@part}
-% \begin{macro}{\c@chapter}
-% \begin{macro}{\c@section}
-% \begin{macro}{\c@subsection}
-% \begin{macro}{\c@subsubsection}
-% \begin{macro}{\c@paragraph}
-% \begin{macro}{\c@subparagraph}
-% These counters are used for the section numbers. The macro\\
-% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\
-% defines \meta{newctr} to be a counter, which is reset to zero when
-% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must
-% already be defined.
-%
-% \begin{macrocode}
-\newcounter {part}
-\newcounter {chapter}
-\newcounter {section}[chapter]
-\newcounter {subsection}[section]
-\newcounter {subsubsection}[subsection]
-\newcounter {paragraph}[subsubsection]
-\newcounter {subparagraph}[paragraph]
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\thepart}
-% \begin{macro}{\thechapter}
-% \begin{macro}{\thesection}
-% \begin{macro}{\thesubsection}
-% \begin{macro}{\thesubsubsection}
-% \begin{macro}{\theparagraph}
-% \begin{macro}{\thesubparagraph}
-% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines
-% the printed version of counter \Lcount{CTR}. It is defined in
-% terms of the following macros:
-%
-% |\arabic{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as an arabic numeral.
-%
-% |\roman{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as a lowercase roman numberal.
-%
-% |\Roman{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as an uppercase roman numberal.
-%
-% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
-% as a lowercase letter: $1 =$~a, $2 =$~ b, etc.
-%
-% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
-% as an uppercase letter: $1 =$~A, $2 =$~B, etc.
-%
-% \begin{macrocode}
-\renewcommand\thepart {\Roman{part}}
-\renewcommand\thechapter {\arabic{chapter}}
-\renewcommand\thesection {\thechapter.\arabic{section}}
-\renewcommand\thesubsection {\thesection.\arabic{subsection}}
-\renewcommand\thesubsubsection {\thesubsection .\arabic{subsubsection}}
-\renewcommand\theparagraph {\thesubsubsection.\arabic{paragraph}}
-\renewcommand\thesubparagraph {\theparagraph.\arabic{subparagraph}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@chapapp}
-% |\@chapapp| is initially defined to be `|\chaptername|'. The
-% |\appendix| command redefines it to be `|\appendixname|'.
-%
-% \begin{macrocode}
-\newcommand\@chapapp{\chaptername}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Parts}
-%
-% \begin{macro}{\part}
-% The command to start a new part of our document.
-%
-% We start a new (righthand) page and use the \pstyle{empty}.
-% \begin{macrocode}
-\newcommand\part{\cleardoublepage
- \thispagestyle{empty}%
-% \end{macrocode}
-% When we are making a two column document, this will be a one
-% column page. We use |@tempswa| to remember to switch back to two
-% columns.
-% \begin{macrocode}
- \if@twocolumn
- \onecolumn
- \@tempswatrue
- \else
- \@tempswafalse
- \fi
-% \end{macrocode}
-% We need an empty box to prevent the fil glue from disappearing.
-% \begin{macrocode}
- \hbox{}\vfil
-% \end{macrocode}
-% Here we use |\secdef| to indicate wwhich commands to use to make
-% the actual heading.
-% \begin{macrocode}
- \secdef\@part\@spart}
-% \end{macrocode}
-%
-% \begin{macro}{\@part}
-% This macro does the actual formatting of the title of the part.
-%
-% \begin{macro}{\PartFont}
-% The font used to typeset the part is stored in this maro.
-% \begin{macrocode}
-\newcommand\PartFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% When \Lcount{secnumdepth} is larger than $-2$ for this document
-% class, we have a numbered part, otherwise it is unnumbered.
-% \begin{macrocode}
-\def\@part[#1]#2{%
- \ifnum \c@secnumdepth >-2\relax
- \refstepcounter{part}%
- \addcontentsline{toc}{part}{\thepart\hspace{1em}\toc@case{#1}}%
- \else
- \addcontentsline{toc}{part}{\toc@case{#1}}%
- \fi
-% \end{macrocode}
-% We empty the mark registers and center the title on the page.
-% Also we prevent breaking between lines and reset the font.
-% \begin{macrocode}
- \markboth{}{}
- {\centering
- \interlinepenalty \@M
- \reset@font
-% \end{macrocode}
-% When this is a numbered part we have to print the number. We have
-% to expand |\partname| before |\uppercase| is called, therefore we
-% use a temporary control sequence that, when called will execute
-% |\uppercase| on the contents of |\partname|.
-% \begin{macrocode}
- \ifnum \c@secnumdepth >-2\relax
- \Large\PartFont
- \edef\@tempa{\noexpand\uppercase{\partname}}\@tempa~\thepart
- \par
-% \end{macrocode}
-% We leave some space before we print the title and leave the
-% finishing up to |\@endpart|.
-% \begin{macrocode}
- \vskip 20\p@
- \fi
- \Large \PartFont \uppercase{#2}\par}%
- \@endpart}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@spart}
-% This macro does the actual formatting of the title of the part
-% when the star form of the user command was used. In this case we
-% {\em never} print a number. Otherwise the formatting is the same.
-%
-% \begin{macrocode}
-\def\@spart#1{%
- {\centering
- \interlinepenalty \@M
- \reset@font
- \Large \PartFont #1\par}%
- \@endpart}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@endpart}
-% This macro finishes the part page, for both |\@part| and
-% |\@spart|.
-%
-% First we fill the current page.
-% \begin{macrocode}
-\def\@endpart{\vfil\newpage
-% \end{macrocode}
-% Then, when we are in twosided mode, we produce a completely blank
-% page.
-% \begin{macrocode}
- \if@twoside
- \hbox{}%
- \thispagestyle{empty}%
- \newpage
- \fi
-% \end{macrocode}
-% When this was a two column document we have to switch back to two
-% column mode.
-% \begin{macrocode}
- \if@tempswa
- \twocolumn
- \fi}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Chapters}
-%
-% \begin{macro}{\chapter}
-% A chapter should always start on a new page therefore we start by
-% calling |\clearpage| and setting the pagestyle for this page to
-% \pstyle{plain}.
-% \begin{macrocode}
-\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi
- \thispagestyle{plain}%
-% \end{macrocode}
-% Then we prevent floats from appearing at the top of this page
-% because it looks weird to see a floating object above a chapter
-% title.
-% \begin{macrocode}
- \global\@topnum\z@
-% \end{macrocode}
-% Then we suppress the indentation of the first paragraph by
-% setting the switch |\@afterindent| to |false|. We use |\secdef|
-% to specify the macros to use for actually setting the chapter
-% title.
-% \begin{macrocode}
- \@afterindentfalse
- \secdef\@chapter\@schapter}
-% \end{macrocode}
-%
-% \begin{macro}{\@chapter}
-% This macro is called when we have a numbered chapter. When
-% \Lcount{secnumdepth} is larger than $-1$ we display the chapter
-% number. We also inform the user that a new chapter is about to be
-% typeset by writing a message to the terminal.
-% \begin{macrocode}
-\def\@chapter[#1]#2{%
- \ifnum \c@secnumdepth >\m@ne
- \refstepcounter{chapter}%
- \typeout{\@chapapp\space\thechapter.}%
- \addcontentsline{toc}{chapter}%
- {\protect\numberline{\thechapter}\toc@font0 #1}%
- \else
- \addcontentsline{toc}{chapter}{\toc@font0 #1}%
- \fi
-% \end{macrocode}
-% After having written an entry to the table of contents we store
-% the (alternative) title of this chapter with |\chaptermark| and
-% add some white space to the lists of figures and tables.
-% \begin{macrocode}
- \chaptermark{#1}%
- \addtocontents{lof}{\protect\addvspace{10\p@}}%
- \addtocontents{lot}{\protect\addvspace{10\p@}}%
-% \end{macrocode}
-% Then we call upon |\@makechapterhead| to format the actual
-% chapter title. We have to do this in a special way when we are in
-% twocolumn mode in order to have the chapter title use the entire
-% |\textwidth|. In one column mode we call |\@afterheading| which
-% takes care of suppressing the indentation.
-% \begin{macrocode}
- \if@twocolumn
- \@topnewpage[\@makechapterhead{#2}]%
- \else
- \@makechapterhead{#2}%
- \@afterheading
- \fi}
-% \end{macrocode}
-%
-% \begin{macro}{\ChapFont}
-% The font used to typeset the chapters is stored in this maro.
-% \begin{macrocode}
-\newcommand\ChapFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makechapterhead}
-% The macro above uses |\@makechapterhead|\meta{text} to format the
-% heading of the chapter.
-%
-% We begin by leaving some white space. The we open a group in
-% which we have a paragraph indent of 0pt, and in which we have the
-% text set ragged right. We also reset the font.
-% \begin{macrocode}
-\def\@makechapterhead#1{%
- \vspace*{50\p@ \@plus 5\p@}%
- {\setlength\parindent{\z@}%
- \setlength\parskip {\z@}%
- \head@style \reset@font
-% \end{macrocode}
-% Then we check whether the number of the chapter has to be printed.
-% If so we leave some whitespace between the chapternumber and its
-% title.
-% \begin{macrocode}
- \ifnum \c@secnumdepth >\m@ne
- \Large\ChapFont \@chapapp{} \thechapter
- \par
- \vskip 20\p@
- \fi
-% \end{macrocode}
-% Now we set the title in a large bold font. We prevent a pagebreak
-% at this point and leave some whitespace before the text begins.
-% \begin{macrocode}
- \Large \ChapFont #1\par
- \nobreak
- \vskip 40\p@
- }}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@schapter}
-% This macro is called when we have an unnumbered chapter. It is
-% much simpler than |\@chapter| because it only needs to typeset
-% the chapter title.
-% \begin{macrocode}
-\def\@schapter#1{\if@twocolumn
- \@topnewpage[\@makeschapterhead{#1}]%
- \else
- \@makeschapterhead{#1}%
- \@afterheading
- \fi}
-% \end{macrocode}
-%
-% \begin{macro}{\@makeschapterhead}
-% The macro above uses |\@makeschapterhead|\meta{text}to format
-% the heading of the chapter. It is similar to |\@makechapterhead|
-% except that it never has to print a chapter number.
-%
-% \begin{macrocode}
-\def\@makeschapterhead#1{%
- \vspace*{50\p@\@plus 5\p@}%
- {\setlength\parindent{\z@}%
- \setlength\parskip{\z@}%
- \head@style
- \reset@font
- \Large \ChapFont #1\par
- \nobreak
- \vskip 40\p@
- }}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \subsubsection{Lower level headings}
-%
-% These commands all make use of |\@startsection|.
-% \begin{macro}{\section}
-% This gives a normal heading with white space above the heading
-% (the whitespace below the heading will be generated by the
-% |\parskip| that is inserted at the start of the first paragraph),
-% the title set in |\large\bfseries|, and no indentation on the
-% first paragraph.
-% \begin{macrocode}
-\newcommand\section{%
- \@startsection {section}{1}{\z@}%
- {-2\baselineskip\@plus -1\baselineskip \@minus -.5\baselineskip}%
-%<+type1> {.5\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\large\SectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SectFont}
-% The font used to typeset the sections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SectFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subsection}
-% This gives a normal heading with white space above the heading,
-% the title set in |\normalsize\bfseries|, and no indentation on
-% the first paragraph.
-% \begin{macrocode}
-\newcommand\subsection{%
- \@startsection{subsection}{2}{\z@}%
- {-1\baselineskip\@plus -.5\baselineskip \@minus -.25\baselineskip}%
-%<+type1> {.25\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\normalsize\SSectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SSectFont}
-% The font used to typeset the subsections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SSectFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subsubsection}
-% This gives a normal heading with white space above the heading,
-% the title set in |\normalsize\tm|, and no indentation on the
-% first paragraph.
-% \begin{macrocode}
-\newcommand\subsubsection{%
- \@startsection{subsubsection}{3}{\z@}%
- {-1\baselineskip plus -.5\baselineskip minus -.25\baselineskip}%
-%<+type1> {.25\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\normalsize\SSSectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SSSectFont}
-% The font used to typeset the subsubsections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SSSectFont{\rmfamily}
-\newcommand\SSSectFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\paragraph}
-% This gives a run-in heading with white space above and to the
-% right of the heading, the title set in |\normalsize\slshape|.
-% \begin{macrocode}
-\newcommand\paragraph{%
- \@startsection{paragraph}{4}{\z@}%
- {3.25ex \@plus1ex \@minus.2ex}%
- {-1em}%
- {\reset@font\normalsize\ParaFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\ParaFont}
-% The font used to typeset the paragraphs is stored in this maro.
-% \begin{macrocode}
-\newcommand\ParaFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subparagraph}
-% This gives an indented run-in heading with white space above and
-% to the right of the heading, the title set in
-% |\normalsize\slshape|.
-% \begin{macrocode}
-\newcommand\subparagraph{%
- \@startsection{subparagraph}{5}{\parindent}%
- {3.25ex \@plus1ex \@minus .2ex}%
- {-1em}%
- {\reset@font\normalsize\SParaFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SParaFont}
-% The font used to typeset the subparagraphs is stored in this maro.
-% \begin{macrocode}
-\newcommand\SParaFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\Headingfonts}
-% To change the fonts that are used to typeset the title,part,
-% chapter and section headings this macro can be used.
-% \begin{macrocode}
-\newcommand\HeadingFonts[8]{%
- \renewcommand\TitleFont{#1}%
- \renewcommand\PartFont{#2}%
- \renewcommand\ChapFont{#3}%
- \renewcommand\SectFont{#4}%
- \renewcommand\SSectFont{#5}%
- \renewcommand\SSSectFont{#6}%
- \renewcommand\ParaFont{#7}%
- \renewcommand\SParaFont{#8}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Lists}
-%
-% \subsubsection{General List Parameters}
-%
-% The following commands are used to set the default values for the list
-% environment's parameters. See the \LaTeX{} manual for an explanation
-% of the meanings of the parameters. Defaults for the list
-% environment are set as follows. First, |\rightmargin|,
-% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth
-% level list, the command |\@listK| is called, where `K' denotes `i',
-% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level
-% list.) By convention, |\@listK| should set |\leftmargin| to
-% |\leftmarginK|.
-%
-% \begin{macro}{\leftmargin}
-% \begin{macro}{\leftmargini}
-% \begin{macro}{\leftmarginii}
-% \begin{macro}{\leftmarginiii}
-% \begin{macro}{\leftmarginiv}
-% \begin{macro}{\leftmarginv}
-% \begin{macro}{\leftmarginvi}
-% For efficiency, level-one list's values are defined at top level, and
-% |\@listi| is defined to set only |\leftmargin|.
-%
-% \begin{macrocode}
-\setlength\leftmargini {\unitindent}
-\setlength\leftmarginii {\othermargin}
-\setlength\leftmarginiii{\othermargin}
-\setlength\leftmarginiv {\othermargin}
-\setlength\leftmarginv {\othermargin}
-\setlength\leftmarginvi {1em}
-% \end{macrocode}
-% Here we set the top level leftmargin.
-% \begin{macrocode}
-\setlength\leftmargin {\leftmargini}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\labelsep}
-% \begin{macro}{\labelwidth}
-% |\labelsep| is the distance between the label and the text of an
-% item; |\labelwidth| is the width of the label.
-% \begin{macrocode}
-\setlength \labelsep {5\p@}
-\setlength \labelwidth{\leftmargini}
-\addtolength\labelwidth{-\labelsep}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\partopsep}
-% When the user leaves a blank line before the environment an extra
-% vertical space of |\partopsep| is inserted, in addition to
-% |\parskip| and |\topsep|.
-% \begin{macrocode}
-\setlength\partopsep{\z@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\topsep}
-% Extra vertical space, in addition to |\parskip|, added above and
-% below list and paragraphing environments.
-% \begin{macrocode}
-\setlength\topsep{\z@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@beginparpenalty}
-% \begin{macro}{\@endparpenalty}
-% These penalties are inserted before and after a list or paragraph
-% environment. They are set to a bonus value to encourage page
-% breaking at these points.
-% \begin{macro}{\@itempenalty}
-% This penalty is inserted between list items.
-% \begin{macrocode}
-\@beginparpenalty -\@lowpenalty
-\@endparpenalty -\@lowpenalty
-\@itempenalty -\@lowpenalty
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@listI}
-% \begin{macro}{\@listi}
-% |\@listI| defines top level and |\@listi| values of
-% |\leftmargin|, |\parsep|, |\topsep|, and |\itemsep|
-%
-% \begin{macrocode}
-\def\@listI{%
- \leftmargin\unitindent
- \labelsep.5em%
- \labelwidth\leftmargin
- \advance\labelwidth-\labelsep
- \parsep \z@
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip \@plus\p@
- \itemsep 0\p@ \@plus1\p@}
-\let\@listi\@listI
-% \end{macrocode}
-% We have to initialise these parameters.
-% \begin{macrocode}
-\@listi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@listii}
-% \begin{macro}{\@listiii}
-% \begin{macro}{\@listiv}
-% \begin{macro}{\@listv}
-% \begin{macro}{\@listvi}
-% Here are the same macros for the higher level lists.
-% \begin{macrocode}
-\def\@listii {\leftmargin\leftmarginii
- \labelsep .5em%
- \labelwidth\leftmarginii
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listiii{\leftmargin\leftmarginiii
- \labelsep .5em%
- \labelwidth\leftmarginiii
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \partopsep \z@ \@plus\p@
- \itemsep \z@ \@plus\p@}
-\def\@listiv {\leftmargin\leftmarginiv
- \labelsep .5em%
- \labelwidth\leftmarginiv%
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listv {\leftmargin\leftmarginv
- \labelsep .5em%
- \labelwidth\leftmarginv
- \advance\labelwidth-\labelsep%
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listvi {\leftmargin\leftmarginvi
- \labelsep .5em
- \labelwidth\leftmarginvi
- \advance\labelwidth{-\labelsep}%
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Enumerate}
-%
-% The enumerate environment uses four counters: \Lcount{enumi},
-% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where
-% \Lcount{enumN} controls the numbering of the Nth level
-% enumeration.
-%
-% \begin{macro}{\theenumi}
-% \begin{macro}{\theenumii}
-% \begin{macro}{\theenumiii}
-% \begin{macro}{\theenumiv}
-% The counters are already defined in \file{latex.dtx}, but their
-% representation is changed here.
-%
-% \begin{macrocode}
-\renewcommand\theenumi{\arabic{enumi}}
-\renewcommand\theenumii{\alph{enumii}}
-\renewcommand\theenumiii{\roman{enumiii}}
-\renewcommand\theenumiv{\Alph{enumiv}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\labelenumi}
-% \begin{macro}{\labelenumii}
-% \begin{macro}{\labelenumiii}
-% \begin{macro}{\labelenumiv}
-% The label for each item is generated by the commands\\
-% |\labelenumi| ... |\labelenumiv|.
-% \begin{macrocode}
-\newcommand\labelenumi{\theenumi.}
-\newcommand\labelenumii{(\theenumii)}
-\newcommand\labelenumiii{\theenumiii.}
-\newcommand\labelenumiv{\theenumiv.}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\p@enumii}
-% \begin{macro}{\p@enumiii}
-% \begin{macro}{\p@enumiv}
-% The expansion of |\p@enumN||\theenumN| defines the output of a
-% |\ref| command when referencing an item of the Nth level of an
-% enumerated list.
-% \begin{macrocode}
-\renewcommand\p@enumii{\theenumi}
-\renewcommand\p@enumiii{\theenumi(\theenumii)}
-\renewcommand\p@enumiv{\p@enumiii\theenumiii}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \begin{environment}{enumerate}
-% We want to have different label positioning on different levels of
-% list. To acheive this we have to redefine the \Lenv{enumerate}
-% environment.
-%
-% \begin{macrocode}
-\renewenvironment{enumerate}{%
- \ifnum \@enumdepth >3
- \@toodeep
- \else
- \advance\@enumdepth \@ne
- \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
- \list{\csname label\@enumctr\endcsname}
- {\usecounter{\@enumctr}%
-%<+type1> \ifnum \@listdepth=1
- \if@revlabel
- \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}%
- \else
-%<-type3> \def\makelabel##1{\hfil##1}
-%<+type3> \def\makelabel##1{##1\hfil}
- \fi
-%<*type1>
- \else
- \def\makelabel##1{##1\hfil}%
-%</type1>
- \fi
- }%
- \fi}
-% \end{macrocode}
-% We try to suppress spaces after these list constructs.
-% \begin{macrocode}
- {\global\@ignoretrue \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Itemize}
-%
-% \begin{macro}{\labelitemi}
-% \begin{macro}{\labelitemii}
-% \begin{macro}{\labelitemiii}
-% \begin{macro}{\labelitemiv}
-% Itemization is controlled by four commands: |\labelitemi|,
-% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define
-% the labels of thevarious itemization levels: the symbols used are
-% bullet, bold en-dash, asterisk and centred dot.
-%
-% \begin{macrocode}
-\newcommand\labelitemi{$\m@th\bullet$}
-\newcommand\labelitemii{\bfseries --}
-\newcommand\labelitemiii{$\m@th\ast$}
-\newcommand\labelitemiv{$\m@th\cdot$}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{itemize}
-% We want to have differen label positioning on different levels of
-% list. To acheive this we have to redefine the \Lenv{itemize}
-% environment.
-% \begin{macrocode}
-\renewenvironment{itemize}{%
- \ifnum \@itemdepth >3
- \@toodeep
- \else
- \advance\@itemdepth \@ne
- \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
- \list{\csname\@itemitem\endcsname}%
- {%
-%<+type1> \ifnum \@listdepth=1\relax
- \if@revlabel
- \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}\else
-%<+type1> \def\makelabel##1{\hfil##1}
-%<+type3> \def\makelabel##1{##1\hfil}
- \fi
-%<*type1>
- \else
- \def\makelabel##1{##1\hfil}
- \fi
-%</type1>
- }%
- \fi}
-% \end{macrocode}
-% We try to suppress spaces after these list constructs.
-% \begin{macrocode}
- {\global\@ignoretrue \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Description}
-%
-% \begin{environment}{description}
-% The description environment is defined here -- while the itemize
-% and enumerate environments are defined in \file{latex.dtx}.
-%
-% \begin{macrocode}
-\newenvironment{description}
- {\list{}{\labelwidth\z@ \itemindent-\leftmargin
- \let\makelabel\descriptionlabel}}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\descriptionlabel}
-% To change the formatting of the label, you must redefine
-% |\descriptionlabel|.
-%
-% \begin{macrocode}
-\newcommand\descriptionlabel[1]{\hspace\labelsep \bfseries #1}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Adapting existing environments}
-%
-% Because we globally set |\topsep| to zero, we need to modify the
-% definitions of a number of environments slightly to get a litle
-% whitespace around them.
-%
-% \begin{environment}{center}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-%<*type1>
-\def\center
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \centering\item[]}
-\let\endcenter\endtrivlist
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{flushleft}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-\def\flushleft
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \raggedright\item[]}
-\let\endflushleft=\endtrivlist
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{flushright}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-\def\flushright
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \raggedleft\item[]}
-\let\endflushright=\endtrivlist
-%</type1>
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{verbatim}
-% In \Lenv{verbatim} we add a little surrounding whitespace,
-% --which for \file{rapport3} is negative to
-% compensate for the positive |\parskip|-- but also an indent for
-% the \file{rapport1} document class.
-% \begin{macrocode}
-\def\verbatim{%
-%<*type1>
- \topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \@verbatim
- \leftskip\unitindent
-%</type1>
-%<*type3>
- \topsep=-.5\parskip
- \@verbatim
-%</type3>
- \frenchspacing\@vobeyspaces \@xverbatim}
-%<+type1>\def\endverbatim{\if@newlist \leavevmode\fi\endtrivlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsection{Defining new environments}
-%
-% \subsubsection{Abstract}
-%
-% \begin{environment}{abstract}
-% When we are producing a separate titlepage we also put the
-% abstract on a page of its own. It will be centred vertically on
-% the page.
-%
-% \begin{macrocode}
-\if@titlepage
- \newenvironment{abstract}{%
- \titlepage
- \null\vfil
- \hbox{\SectFont \abstractname}
- \noindent\ignorespaces}
- {\par\vfil\null\endtitlepage}
-% \end{macrocode}
-% When we are not making a seperate titlepagewe have to check if we
-% are in twocolumn mode. In that case the abstract is set as a
-% |\section*|, otherwise the abstract is typeset flushleft, an
-% amount |\unitindent| smaller as the normal text.
-% \begin{macrocode}
-\else
- \newenvironment{abstract}{%
- \if@twocolumn
- \section*{\abstractname}%
- \else
- \small
- \bgroup\rightskip=\unitindent
- \hbox{\SectFont \abstractname}%
- \noindent\ignorespaces
-% \end{macrocode}
- \fi}
-% \end{macrocode}
-% Which implies that the definition of |\end{abstract}| is also
-% different.
-% \begin{macrocode}
- {\if@twocolumn\else\par\egroup\fi}
-\fi
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Verse}
-%
-% \begin{environment}{verse}
-% The verse environment is defined by making clever use of the
-% list environment's parameters. The user types |\\| to end a line.
-% This is implemented by |\let|'ing |\\| equal |\@centercr|.
-%
-% \begin{macrocode}
-\newenvironment{verse}
- {\let\\=\@centercr
- \list{}{\itemsep\z@
- \itemindent-1.5em%
- \listparindent\itemindent
- \rightmargin\leftmargin
- \advance\leftmargin1.5em}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Quotation}
-%
-% \begin{environment}{quotation}
-% The quotation environment is also defined by making clever use of
-% the list environment's parameters. The lines in the environment
-% are set smaller than |\textwidth|. The first line of a paragraph
-% inside this environment is indented.
-%
-% \begin{macrocode}
-\newenvironment{quotation}
- {\list{}{%
- \listparindent\z@
- \itemindent\listparindent
- \rightmargin\leftmargin
- \parsep\z@ \@plus\p@}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Quote}
-%
-% \begin{environment}{quote}
-% The quote environment is like the quotation environment except
-% that paragraphs are not indented.
-%
-% \begin{macrocode}
-\newenvironment{quote}
- {\list{}{\rightmargin\leftmargin}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Theorem}
-%
-% \begin{macro}{\@begintheorem}
-% \begin{macro}{\@opargbegintheorem}
-% \begin{macro}{\@endtheorem}
-% These document classes have a slightly modified \Lenv{theorem}
-% environment style. Surrounding whitespace is added and an
-% initialisation of |\labelsep|. Finally a slanted font instead of
-% an italic font is used.
-% \begin{macrocode}
-\def\@begintheorem#1#2{%
- \vskip\baselineskip \labelsep=.5em%
- \trivlist
- \item[\hskip \labelsep{\bfseries #1\ #2}]\slshape}
-\def\@opargbegintheorem#1#2#3{%
- \vskip\baselineskip \labelsep=.5em%
- \trivlist
- \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]\slshape}
-\def\@endtheorem{\endtrivlist \vskip\baselineskip}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Titlepage}
-%
-% \begin{environment}{titlepage}
-% In the normal environments, the titlepage environment does nothing
-% but start and end a page, and inhibit page numbers. It also resets
-% the page number to zero. In two-column style, it still makes a
-% one-column page.
-%
-% \begin{macrocode}
-\newenvironment{titlepage}
- {
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse\newpage
- \fi
- \thispagestyle{empty}%
- \if@compatibility
- \setcounter{page}{0}
- \else
- \setcounter{page}{1}%
- \fi}
- {\if@restonecol\twocolumn \else \newpage \fi
- \setcounter{page}{1}%
- }
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Appendix}
-%
-% \begin{macro}{\appendix}
-%
-% The |\appendix| command is not really an environment, it is a
-% macro that makes some changes in the way things are done.
-%
-% In this document class the |\appendix| command must do the
-% following:
-% \begin{itemize}
-% \item reset the chapter and section counters to zero,
-% \item set |\@chapapp| to |\appendixname| (for messages),
-% \item redefine the chapter counter to produce appendix numbers,
-% \item possibly redefine the |\chapter| command if appendix titles
-% and headings are to look different from chapter titles and
-% headings.
-% \end{itemize}
-%
-% \begin{macrocode}
-\newcommand\appendix{\par
- \setcounter{chapter}{0}%
- \setcounter{section}{0}%
- \renewcommand\@chapapp{\appendixname}%
- \renewcommand\thechapter{\Alph{chapter}}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Setting parameters for existing environments}
-%
-% \subsubsection{Array and tabular}
-%
-% \begin{macro}{\arraycolsep}
-% The columns in an array environment are separated by
-% 2|\arraycolsep|.
-% \begin{macrocode}
-\setlength\arraycolsep{5\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\tabcolsep}
-% The columns in an tabular environment are separated by
-% 2|\tabcolsep|.
-% \begin{macrocode}
-\setlength\tabcolsep{6\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\arrayrulewidth}
-% The width of rules in the array and tabular environments is given
-% by |\arrayrulewidth|.
-% \begin{macrocode}
-\setlength\arrayrulewidth{.4\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\doublerulesep}
-% The space between adjacent rules in the array and tabular
-% environments is given by |\doublerulesep|.
-% \begin{macrocode}
-\setlength\doublerulesep{2\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Tabbing}
-%
-% \begin{macro}{\tabbingsep}
-% This controls the space that the |\'| command puts in. (See
-% \LaTeX{} manual for an explanation.)
-% \begin{macrocode}
-\setlength\tabbingsep{\labelsep}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Minipage}
-%
-% \begin{macro}{\@minipagerestore}
-% The macro |\@minipagerestore| is called upon entry to a minipage
-% environment to set up things that are to be handled differently
-% inside a minipage environment.
-%
-% \begin{macrocode}
-%<+type1>\def\@minipagerestore{\parindent\unitindent}
-%<*type3>
-\def\@minipagerestore{%
- \parskip=.5\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@mpfootins}
-% Minipages have their own footnotes; |\skip||\@mpfootins| plays
-% same r\^ole for footnotes in a minipage as |\skip||\footins| does
-% for ordinary footnotes.
-%
-% \begin{macrocode}
-\skip\@mpfootins = \skip\footins
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Framed boxes}
-%
-% \begin{macro}{\fboxsep}
-% The space left by |\fbox| and |\framebox| between the box and the
-% text in it.
-% \begin{macro}{\fboxrule}
-% The width of the rules in the box made by |\fbox| and |\framebox|.
-% \begin{macrocode}
-\setlength\fboxsep{3\p@}
-\setlength\fboxrule{.4\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Equation and eqnarray}
-%
-% \begin{macro}{\theequation}
-% The equation counter will be reset at beginning of a new chapter
-% and the equation number will be prefixed by the chapter number.
-%
-% This code must follow the |\chapter| definition, or more exactly
-% the definition of the chapter counter.
-% \begin{macrocode}
-\@addtoreset{equation}{chapter}
-\renewcommand\theequation{\thechapter.\arabic{equation}}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\jot}
-% |\jot| is the extra space added between lines of an eqnarray
-% environment. The default value is used.
-% \begin{macrocode}
-% \setlength\jot{3pt}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@eqnnum}
-% The macro |\@eqnnum| defines how equation numbers are to appear in
-% equations. Again the default is used.
-%
-% \begin{macrocode}
-% \def\@eqnnum{(\theequation)}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Floating objects}
-%
-% The file \file{latex.dtx} only defines a number of tools with
-% which floating objects can be defined. This is done in the
-% document class. It needs to define the following macros for each
-% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} =
-% figure).
-%
-% \begin{description}
-% \item[\texttt{\bslash fps@TYPE}]
-% The default placement specifier for floats of type
-% \texttt{TYPE}.
-%
-% \item[\texttt{\bslash ftype@TYPE}]
-% The type number for floats of type \texttt{TYPE}. Each
-% \texttt{TYPE} has associated a unique positive {\texttt
-% TYPE} number, which is a power of two. E.g., figures might
-% have type number 1, tables type number 2, programs type
-% number 4, etc.
-%
-% \item[\texttt{\bslash ext@TYPE}]
-% The file extension indicating the file on which the contents
-% list for float type \texttt{TYPE} is stored. For example,
-% |\ext@figure| = `lof'.
-%
-% \item[\texttt{\bslash fnum@TYPE}]
-% A macro to generate the figure number for a caption. For
-% example, |\fnum@TYPE| == `Figure |\thefigure|'.
-%
-% \item[\texttt{\bslash @makecaption{\meta{num}}{\meta{text}}}]
-% A macro to make a caption, with \meta{num} the value produced
-% by |\fnum@...| and \meta{text} the text of the caption. It
-% can assume it's in a |\parbox| of the appropriate width.
-% This will be used for {\em all} floating objects.
-%
-% \end{description}
-%
-% The actual environment that implements a floating object such as
-% a figure is defined using the macros |\@float| and |\end@float|,
-% which are defined in \file{latex.dtx}.
-%
-% An environment that implements a single column floating object is
-% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type
-% \texttt{TYPE} with \meta{placement} as the placement specifier.
-% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|.
-%
-% The environment is ended by |\end@float|. E.g., |\figure| ==
-% |\@float|{figure}, |\endfigure| == |\end@float|.
-%
-% \subsubsection{Figure}
-%
-% Here is the implementation of the figure environment.
-%
-% \begin{macro}{\c@figure}
-% First we have to allocate a counter to number the figures. In
-% this document class the figures are numbered per chapter.
-% \begin{macrocode}
-\newcounter{figure}[chapter]
-\renewcommand\thefigure{\thechapter.\@arabic\c@figure}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\fps@figure}
-% \begin{macro}{\ftype@figure}
-% \begin{macro}{\ext@figure}
-% \begin{macro}{\num@figure}
-% Here are the parameters for the floating objects of type `figure'.
-% \begin{macrocode}
-\def\fps@figure{tbp}
-\def\ftype@figure{1}
-\def\ext@figure{lof}
-\def\fnum@figure{\figurename~\thefigure}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{figure}
-% \begin{environment}{figure*}
-% And the definition of the actual environment. The form with the
-% |*| is used for double column figures.
-% \begin{macrocode}
-\newenvironment{figure}
- {\@float{figure}}
- {\end@float}
-\newenvironment{figure*}
- {\@dblfloat{figure}}
- {\end@dblfloat}
-% \end{macrocode}
-% \end{environment}
-% \end{environment}
-%
-% \subsubsection{Table}
-%
-% Here is the implementation of the table environment. It is very
-% much the same as the figure environment.
-%
-% \begin{macro}{\c@table}
-% First we have to allocate a counter to number the tables. In this
-% document class the tables are numbered per chapter.
-% \begin{macrocode}
-\newcounter{table}[chapter]
-\renewcommand\thetable{\thechapter.\@arabic\c@table}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\fps@table}
-% \begin{macro}{\ftype@table}
-% \begin{macro}{\ext@table}
-% \begin{macro}{\num@table}
-% Here are the parameters for the floating objects of type `table'.
-% \begin{macrocode}
-\def\fps@table{tbp}
-\def\ftype@table{2}
-\def\ext@table{lot}
-\def\fnum@table{\tablename~\thetable}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{table}
-% \begin{environment}{table*}
-% And the definition of the actual environment. The form with the
-% |*| is used for double column tables.
-% \begin{macrocode}
-\newenvironment{table}
- {\@float{table}}
- {\end@float}
-\newenvironment{table*}
- {\@dblfloat{table}}
- {\end@dblfloat}
-% \end{macrocode}
-% \end{environment}
-% \end{environment}
-%
-% \subsubsection{Captions}
-%
-% \begin{macro}{\@makecaption}
-% The |\caption| command calls |\@makecaption| to format the
-% caption of floating objects. It gets two arguments,
-% \meta{number}, the number of the floating object and \meta{text},
-% the text of the caption. Usually \meta{number} contains a string
-% such as `Figure 3.2'. The macro can assume it is called inside a
-% |\parbox| of right width, with |\normalsize|.
-%
-% \begin{macro}{\abovecaptionskip}
-% \begin{macro}{\belowcaptionskip}
-% These lengths contain the amount of white space to leave above
-% and below the caption.
-% \begin{macrocode}
-\newlength\abovecaptionskip
-\newlength\belowcaptionskip
-\setlength\abovecaptionskip{10\p@}
-\setlength\belowcaptionskip{0\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% The definition of this macro is |\long| in order to allow more
-% then one paragraph in a caption.
-% \begin{macrocode}
-\long\def\@makecaption#1#2{%
- \vskip\abovecaptionskip
-% \end{macrocode}
-% We want to see if the caption fits on one line on the page,
-% therefore we first typeset it in a temporary box.
-% \begin{macrocode}
- \sbox\@tempboxa{{\CaptionLabelFont#1:} \CaptionTextFont#2}%
-% \end{macrocode}
-% We can the measure its width. It that is larger than the current
-% |\hsize| we typeset the caption as an ordinary paragraph.
-% \begin{macrocode}
- \ifdim \wd\@tempboxa >\hsize
- {\CaptionLabelFont#1:} \CaptionTextFont#2\par
-% \end{macrocode}
-% If the caption fits, we center it.
-% \begin{macrocode}
- \else
- \hbox to\hsize{\hfil\box\@tempboxa\hfil}%
- \fi
- \vskip\belowcaptionskip}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\CaptionLabelFont}
-% \begin{macro}{\CaptionTextFont}
-% These macros can contain the fonts used for typesetting captions.
-% By default they do nothing.
-% \begin{macrocode}
-\newcommand\CaptionLabelFont{\relax}
-\newcommand\CaptionTextFont{\relax}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\CaptionFonts}
-% To change the fonts that are used to typeset captions
-% this macro can be used.
-% \begin{macrocode}
-\newcommand\CaptionFonts[2]{%
- \renewcommand\CaptionLabelFont{#1}%
- \renewcommand\CaptionTextFont{#2}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Font changing}
-%
-% Here we supply the declarative font changing commands that were
-% common in \LaTeX\ version 2.09 and earlier. These commands work
-% in text mode \emph{and} in math mode. They are provided for
-% compatibility, but one should start using the |\text...| and
-% |\math...| commands instead. These commands are defined using
-% |\DeclareOldFontCommand|, a command with three arguments: the user
-% command to be defined; \LaTeX\ commands to execute in text mode
-% and \LaTeX\ commands to execute in math mode.
-%
-% \begin{macro}{\rm}
-% \begin{macro}{\tt}
-% \begin{macro}{\sf}
-%
-% The commands to change the family. When in compatibility mode we
-% select the `default' font first, to get \LaTeX2.09 behviour.
-% \begin{macrocode}
-\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
-\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
-\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\bf}
-% The command to change to the bold series. One should use
-% |\mdseries| to explicitly switch back to medium series.
-% \begin{macrocode}
-\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\sl}
-% \begin{macro}{\it}
-% \begin{macro}{\sc}
-%
-% And the commands to change the shape of the font. The slanted and
-% small caps shapes are not available by default as math alphabets,
-% so those changes do nothing in math mode. One should use
-% |\upshape| to explicitly change back to the upright shape.
-% \begin{macrocode}
-\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
-\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\relax}
-\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\relax}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\cal}
-% \begin{macro}{\mit}
-%
-% The commands |\cal| and |\mit| should only be used in math mode,
-% outside math mode they have no effect. Currently the New Font
-% Selection Scheme defines these commands to generate warning
-% messages. Therefore we have to define them `by hand'.
-% \begin{macrocode}
-\renewcommand{\cal}{\protect\pcal}
-\newcommand{\pcal}{\@fontswitch{\relax}{\mathcal}}
-\renewcommand{\mit}{\protect\pmit}
-\newcommand{\pmit}{\@fontswitch{\relax}{\mathnormal}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\pem}
-% The definition of |\pem| is changed here to have slanted instead
-% of italic fonts.
-% \begin{macrocode}
-\def\pem{\@nomath\em \ifdim \fontdimen\@ne\font >\z@
- \upshape \else \slshape \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Cross Referencing}
-% \subsection{Table of Contents, etc.}
-%
-% A |\section| command writes a
-% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command
-% on the \file{.toc} file, where \meta{title} contains the
-% contents of the entry and \meta{page} is the page number. If
-% sections are being numbered, then \meta{title} will be of the
-% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where
-% \meta{num} is the number produced by |\thesection|. Other
-% sectioning commands work similarly.
-%
-% A |\caption| command in a `figure' environment writes
-%
-% |\contentsline{figure}{\numberline{|\meta{num}|}{|%
-% \meta{caption}|}}{|\meta{page}|}|
-%
-% on the .\file{lof} file, where \meta{num} is the number produced
-% by |\thefigure| and \meta{caption} is the figure caption. It
-% works similarly for a `table' environment.
-%
-% The command |\contentsline{|\meta{name}|}| expands to
-% |\l@|\meta{name}. So, to specify the table of contents, we must
-% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to
-% specify the list of figures, we must define |\l@figure|; and so
-% on. Most of these can be defined with either the
-% |\@dottedtocline| or the |\@regtocline| command, which work as
-% follows.
-%
-% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A
-% \meta{numwidth}|}{|^^A
-% \meta{title}|}{|\meta{page}|}|
-%
-% |\@regtocline{|\meta{level}|}{|\meta{title}|}{|\meta{page}|}|
-%
-% \begin{description}
-% \item[\meta{level}] An entry is produced only if\meta{ level}
-% $<=$ value of the \Lcount{tocdepth} counter. Note,
-% |\chapter| is level 0, |\section| is level 1, etc.
-% \item[\meta{indent}] The indentation from the outer left margin
-% of the start of the contents line.
-% \item[\meta{numwidth}] The width of a box in which the section
-% number is to go, if \meta{title} includes a |\numberline|
-% command.
-% \end{description}
-%
-% \begin{macro}{\@pnumwidth}
-% \begin{macro}{\@tocrmarg}
-% \begin{macro}{\@dotsep}
-% This command uses the following three parameters, which are set
-% with a |\newcommand| (so em's can be used to make them depend upon
-% the font).
-% \begin{description}
-% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the
-% page number is put.
-% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple
-% line entries. One wants |\@tocrmarg| > or = |\@pnumwidth|
-% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu
-% units. Should be defined as a number like 2 or 1.7
-% \end{description}
-%
-% \begin{macrocode}
-\newcommand\@pnumwidth{1.55em}
-\newcommand\@tocrmarg {2.55em}
-\newcommand\@dotsep{4.5}
-\setcounter{tocdepth}{2}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Table of Contents}
-%
-% \begin{macro}{\tableofcontents}
-% This macro is used to request that \LaTeX{} produces a table of
-% contents. The tables of contents, figures etc. are always set in
-% single-column style.
-%
-% \begin{macrocode}
-\newcommand\tableofcontents{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
-% \end{macrocode}
-% The title is set using the |\chapter*| command, making sure that
-% the running head --if one is required-- contains the right
-% information.
-% \begin{macrocode}
- \chapter*{\contentsname
- \@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}%
-% \end{macrocode}
-% The the actual table of contents is made by calling
-% |\@starttoc{toc}|. After that we restore twocolumn mode if
-% necessary.
-% \begin{macrocode}
- \@starttoc{toc}%
- \if@restonecol\twocolumn\fi
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@starttoc}
-% The internal \LaTeXe macro |\@starttoc| needs to be adapted for
-% the \file{rapport3} document classes,in order to deal with a the
-% fact that for these document classes the |\parskip| is normally
-% non-zero. We don't want that in the table of contents.
-% \begin{macrocode}
-%<*type3>
-\def\@starttoc#1{\begingroup
- \makeatletter
- \parskip\z@
- \@input{\jobname.#1}%
- \if@filesw
- \expandafter\newwrite\csname tf@#1\endcsname
- \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
- \fi \global\@nobreakfalse \endgroup}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@regtocline}
-% These document classes use a different format for the table of
-% contents than the standard classes from which they were
-% developped. In order to acheive this different format we defined
-% the macro |\@regtocline|.
-% \begin{macrocode}
-\newcommand\@regtocline[3]{%
- \ifnum #1>\c@tocdepth
- \else
- \vskip \z@ plus .2pt
- {\hangindent\z@ \@afterindenttrue \interlinepenalty\@M
- \leftskip\unitindent
- \rightskip=\unitindent plus 1fil
- \parfillskip=0cm
- \@tempdima=\unitindent
- \parindent\z@
- \leavevmode
- \hbox{}\hskip -\leftskip\relax#2\nobreak
- \hskip 1em \nobreak{\slshape #3}\par
- }%
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\toc@font}
-% The changed definition of |\@sect| that we use, selects a
-% different font for the table of contents for the various header
-% levels. It does this using |\toc@font|.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\toc@font[1]{\relax}
-\else
- \newcommand\toc@font[1]{%
- \ifcase#1\relax
- \bfseries
- \or\slshape
- \or\rmfamily
- \fi}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\toc@case}
-% The entries for parts are typeset in capital letters in the new
-% style of the table of contents. In the old style this isn't
-% done. The macro |\toc@case| is used to switch this.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\toc@case{\relax}
-\else
- \newcommand\toc@case{\uppercase}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@part}
-% Each sectioning command needs an additional macro to format its
-% entry in the table of contents, as described above. The macro for
-% the entry for parts is defined in a special way.
-%
-% First we make sure that if a pagebreak should occur, it occurs
-% {\em before} this entry. Also a little whitespace is added and a
-% group begun to keep changes local.
-%
-% First we have the definition from the standard classes.
-% \begin{macrocode}
-\if@oldtoc
-\newcommand\l@part[2]{%
- \addpenalty{-\@highpenalty}%
- \addvspace{2.25em \@plus\p@}%
- \begingroup
-% \end{macrocode}
-% The macro |\numberline| requires that the width of the box that
-% holds the part number is stored in \LaTeX's scratch register
-% |\@tempdima|. Therefore we put it there.
-% \begin{macrocode}
- \setlength\@tempdima{3em}%
-% \end{macrocode}
-% The we set |\parindent| to 0pt and use |\rightskip| to leave
-% enough room for the pagenumbers. To prevent overfull box messages
-% the |\parfillskip| is set to a negative value.
-% \begin{macrocode}
- \parindent \z@ \rightskip \@pnumwidth
- \parfillskip -\@pnumwidth
-% \end{macrocode}
-% Now we can set the entry, in a large bold font. We make sure to
-% leave vertical mode, set the part title and add the pagenumber,
-% set flush right.
-% \begin{macrocode}
- {\leavevmode
- \large \bfseries #1\hfil \hbox to\@pnumwidth{\hss #2}}\par
-% \end{macrocode}
-% Prevent a pagebreak immediately after this entry, but use
-% |\everypar| to reset the |\if@nobreak| switch. Finally we close
-% the group.
-% \begin{macrocode}
- \nobreak
- \global\@nobreaktrue
- \everypar{\global\@nobreakfalse\everypar{}}
- \endgroup}
-% \end{macrocode}
-% Then we can introduce our new definition.
-% \begin{macrocode}
-\else
- \newcommand\l@part{\addpenalty{-\@highpenalty}
- \addvspace{2.25em \@plus \p@}\@regtocline{0}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@chapter}
-% This macro formats the entries in the table of contents for
-% chapters. It is very similar to |\l@part|
-%
-% First we make sure that if a pagebreak should occur, it occurs
-% {\em before} this entry. Also a little whitespace is added and a
-% group begun to keep changes local.
-%
-% Again we first present the `standard' definition
-% \begin{macrocode}
-\if@oldtoc
-\newcommand\l@chapter[2]{%
- \addpenalty{-\@highpenalty}%
- \vskip 1.0em \@plus\p@
-% \end{macrocode}
-%
-% The macro |\numberline| requires that the width of the box that
-% holds the part number is stored in \LaTeX's scratch register
-% |\@tempdima|. Therefore we put it there. We begin a group, and
-% change some of the paragraph parameters.
-% \begin{macrocode}
- \setlength\@tempdima{1.5em}%
- \begingroup
- \parindent \z@ \rightskip \@pnumwidth
- \parfillskip -\@pnumwidth
-% \end{macrocode}
-% Then we leave vertical mode and switch to a bold font.
-% \begin{macrocode}
- \leavevmode \bfseries
-% \end{macrocode}
-% Because we do not use |\numberline| here, we have do some fine
-% tuning `by hand', before we can set the entry. We discourage but
-% not disallow a pagebreak immediately after a chapter entry.
-% \begin{macrocode}
- \advance\leftskip\@tempdima
- \hskip -\leftskip
- #1\nobreak\hfil \nobreak\hbox to\@pnumwidth{\hss #2}\par
- \penalty\@highpenalty
- \endgroup}
-% \end{macrocode}
-% Then we present our new definition.
-% \begin{macrocode}
-\else
- \newcommand\l@chapter{\@regtocline{0}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@section}
-% In this document class the definition for
-% |\l@section| is very simple.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@section {\@dottedtocline{1}{1.5em}{2.3em}}
-\else
- \newcommand\l@section {\@regtocline{1}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@subsection}
-% \begin{macro}{\l@subsubsection}
-% \begin{macro}{\l@paragraph}
-% \begin{macro}{\l@subparagraph}
-% All lower level entries are defined using the macro
-% |\@dottedtocline| or |\@regtocline| (see above).
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@subsection {\@dottedtocline{2}{3.8em}{3.2em}}
- \newcommand\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
- \newcommand\l@paragraph {\@dottedtocline{4}{10em}{5em}}
- \newcommand\l@subparagraph {\@dottedtocline{5}{12em}{6em}}
-\else
- \newcommand\l@subsection {\@regtocline{2}}
- \newcommand\l@subsubsection{\@regtocline{3}}
- \newcommand\l@paragraph {\@regtocline{4}}
- \newcommand\l@subparagraph {\@regtocline{5}}
-\fi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{List of figures}
-%
-% \begin{macro}{\listoffigures}
-% This macro is used to request that \LaTeX{} produces a list of
-% figures. It is very similar to |\tableofcontents|.
-%
-% \begin{macrocode}
-\newcommand\listoffigures{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
- \chapter*{\listfigurename
- \@mkboth{\uppercase{\listfigurename}}%
- {\uppercase{\listfigurename}}}%
- \@starttoc{lof}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@figure}
-% This macro produces an entry in the list of figures.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
-\else
- \newcommand\l@figure{\@regtocline{1}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{List of tables}
-%
-% \begin{macro}{\listoftables}
-% This macro is used to request that \LaTeX{} produces a list of
-% tables. It is very similar to |\tableofcontents|.
-%
-% \begin{macrocode}
-\newcommand\listoftables{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
- \chapter*{\listtablename
- \@mkboth{\uppercase{\listtablename}}{\uppercase{\listtablename}}}%
- \@starttoc{lot}%
- \if@restonecol\twocolumn\fi
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@table}
-% This macro produces an entry in the list of tables.
-% \begin{macrocode}
-\let\l@table\l@figure
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Bibliography}
-%
-% \begin{macro}{\bibindent}
-% The ``open'' bibliography format uses an indentation of
-% |\bibindent|.
-% \begin{macrocode}
-\newdimen\bibindent
-\bibindent=1.5em
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\newblock}
-% This is a dummy definition for this macro which is used in the
-% \textsf{thebibliography} environment.
-% \begin{macrocode}
-\newcommand\newblock{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{environment}{thebibliography}
-% The `thebibliography' environment executes the following
-% commands:
-%
-% |\renewcommand\newblock{\hskip .11em \@plus .33em \@minus .07em}|
-% -- Defines the ``closed'' format, where the blocks (major units
-% of information) of an entry run together.
-%
-% |\sloppy| -- Used because it's rather hard to do line breaks in
-% bibliographies,
-%
-% |\sfcode`\.=1000\relax| --
-% Causes a `.' (period) not to produce an end-of-sentence space.
-%
-% The implementation of this environment is based on the generic
-% list environment. It uses the \Lcount{enumiv} counter internally
-% to generate the labels of the list.
-%
-% When an empty `thebibliography' environment is found, a warning
-% is issued.
-%
-% \begin{macrocode}
-\newenvironment{thebibliography}[1]
- {\chapter*{\bibname
- \@mkboth{\uppercase{\bibname}}%
- {\uppercase{\bibname}}}%
- \list{\@biblabel{\arabic{enumiv}}}%
- {\settowidth\labelwidth{\@biblabel{#1}}%
- \leftmargin\labelwidth
- \advance\leftmargin\labelsep
- \if@openbib
- \advance\leftmargin\bibindent
- \itemindent -\bibindent
- \listparindent \itemindent
- \parsep \z@
- \fi
- \usecounter{enumiv}%
- \let\p@enumiv\@empty
- \renewcommand\theenumiv{\arabic{enumiv}}}%
- \if@openbib
- \renewcommand\newblock{\par}
- \else
- \renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}%
- \fi
- \sloppy\clubpenalty4000\widowpenalty4000%
- \sfcode`\.=\@m}
- {\def\@noitemerr{\@warning{Empty `thebibliography' environment}}%
- \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\@biblabel}
-% The label for a |\bibitem[...]| command is produced by this
-% macro. The default from \file{latex.dtx} is used.
-% \begin{macrocode}
-% \renewcommand\@biblabel[1]{[#1]\hfill}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@cite}
-% The output of the |\cite| command is produced by this macro. The
-% default from \file{latex.dtx} is used.
-% \begin{macrocode}
-% \renewcommand\@cite[1]{[#1]}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{The index}
-%
-% \begin{environment}{theindex}
-% The environment `theindex' can be used for indices. It makes an
-% index with two columns, with each entry a seperate paragraph. At
-% the user level the commands |\item|, |\subitem| and |\subsubitem|
-% are used to produce index entries of various levels. When a new
-% letter of the alphabet is encountered an amount of |\indexspace|
-% white space can be added.
-%
-% \begin{macrocode}
-\newenvironment{theindex}
- {\if@twocolumn
- \@restonecolfalse
- \else
- \@restonecoltrue
- \fi
- \columnseprule \z@
- \columnsep 35\p@
- \twocolumn[\@makeschapterhead{\indexname}]%
- \@mkboth{\uppercase{\indexname}}%
- {\uppercase{\indexname}}%
- \thispagestyle{plain}\parindent\z@
- \parskip\z@ \@plus .3\p@\relax
- \let\item\@idxitem}
-% \end{macrocode}
-% When the document continues after the index and it was a one
-% column document we have to switch back to one column after the
-% index.
-% \begin{macrocode}
- {\if@restonecol\onecolumn\else\clearpage\fi}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\@idxitem}
-% \begin{macro}{\subitem}
-% \begin{macro}{\subsubitem}
-% Thsee macros are used to format the entries in the index. ^^AA ???
-% \begin{macrocode}
-\newcommand\@idxitem {\par\hangindent 40\p@}
-\newcommand\subitem {\par\hangindent 40\p@ \hspace*{20\p@}}
-\newcommand\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\indexspace}
-% The amount of white space that is inserted between `letter
-% blocks' in the index.
-% \begin{macrocode}
-\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Footnotes}
-%
-% \begin{macro}{\footnoterule}
-% Usually, footnotes are separated from the main body of the text
-% by a small rule. This rule is drawn by the macro |\footnoterule|.
-% We have to make sure that the rule takes no vertical space (see
-% \file{plain.tex}) so we compensate for the natural heigth of the
-% rule of 0.4pt by adding the right amount of vertical skip.
-%
-% To prevent the rule from colliding with the footnote we first add
-% a little negative vertical skip, then we put the rule and add
-% some positive vertical skip.
-% \begin{macrocode}
-\renewcommand\footnoterule{%
- \kern-3\p@
- \kern.5\baselineskip
- \hrule\@width\unitindent
- \kern.4\baselineskip
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@footnote}
-% Footnotes are numbered within chapters.
-% \begin{macrocode}
-% \newcounter{footnote}
-\@addtoreset{footnote}{chapter}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makefntext}
-% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext|
-% to produce the actual footnote. The macro gets the text of the
-% footnote as its argument and should use |\@thefnmark| as the mark
-% of the footnote. The macro |\@makefntext|is called when
-% effectively inside a |\parbox| of width |\columnwidth| (i.e.,
-% with |\hsize| = |\columnwidth|).
-%
-% An example of what can be achieved is given by the following piece
-% of \TeX\ code.
-% \begin{verbatim}
-% \long\def\@xmakefntext#1#2{%
-% %<-type3> \parindent=.5\unitindent
-% %<+type3> \parindent=\z@\parskip=.5\baselineskip
-% \def\labelitemi{--}\@revlabeltrue
-% {\setbox0=\hbox {#1\hskip.5em plus 1fil}%
-% \dimen0=2\wd0
-% \ifdim\dimen0>\unitindent
-% \global\unitindent=\dimen0
-% \@indentset
-% \fi}%
-% \@setpar{\@@par
-% \@tempdima \hsize
-% \advance\@tempdima-.5\unitindent
-% \parshape \@ne .5\unitindent \@tempdima}%
-% \par
-% \noindent\llap{\hbox to .5\unitindent{#1\hfil}}#2}
-% \end{verbatim}
-% The effect of this definition is that all lines of the footnote
-% are indented by 10pt, while the first line of a new paragraph is
-% indented by 1em. To change these dimensions, just substitute the
-% desired value for `10pt' (in both places) or `1em'. The mark is
-% flushright against the footnote.
-%
-% In these document classes we use a simpler macro, in which the
-% footnote text is set like an ordinary text paragraph, with no
-% indentation except on the first line of the footnote. Thus, all
-% the macro must do is set |\parindent| to the appropriate value
-% for succeeding paragraphs and put the proper indentation before
-% the mark. We change the label of itemized lists inside footnotes
-% and need to check that the |\unitindent| is large enough for our
-% purposes.
-%
-% For most of the document classes produced from this file we need
-% a slightly modified |\@makefntext| on the title page, so we
-% introduce an extra macro, |\@xmakefntext|.
-% \begin{macrocode}
-\def\@makefntext{\@xmakefntext{$\m@th\@thefnmark$.}}
-\long\def\@xmakefntext#1{%
- \parindent\z@
- \def\labelitemi{--}\@revlabeltrue
- {\setbox0=\hbox {#1\hskip.5em plus 1fil}
- \dimen0=2\wd0\relax
- \ifdim\dimen0>\unitindent
- \global\unitindent=\dimen0\relax
- \@indentset
- \fi}
- \leavevmode\hbox to .5\unitindent{#1\hfil}}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makefnmark}
-% The footnote markers that are printed in the text to point to the
-% footnotes should be produced by the macro |\@makefnmark|. We use
-% the default definition for it.
-% \begin{macrocode}
-%\def\@makefnmark{\hbox{$^{\@thefnmark}\m@th$}}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Initialization}
-%
-% \subsection{Words}
-%
-% \begin{macro}{\contentsname}
-% \begin{macro}{\listfigurename}
-% \begin{macro}{\listtablename}
-% \begin{macro}{\refname}
-% \begin{macro}{\bibname}
-% \begin{macro}{\indexname}
-% \begin{macro}{\figurename}
-% \begin{macro}{\tablename}
-% \begin{macro}{\partname}
-% \begin{macro}{\chaptername}
-% \begin{macro}{\appendixname}
-% \begin{macro}{\abstractname}
-% \begin{macro}{\seename}
-% \begin{macro}{\andname}
-% This document class is for documents prepared in the English language.
-% To prepare a version for another language, various English words must
-% be replaced. All the English words that require replacement are
-% defined below in command names.
-%
-% \begin{macrocode}
-\newcommand\contentsname{Contents}
-\newcommand\listfigurename{List of Figures}
-\newcommand\listtablename{List of Tables}
-\newcommand\bibname{Bibliography}
-\newcommand\indexname{Index}
-\newcommand\figurename{Figure}
-\newcommand\tablename{Table}
-\newcommand\partname{Part}
-\newcommand\chaptername{Chapter}
-\newcommand\appendixname{Appendix}
-\newcommand\abstractname{Abstract}
-\newcommand\seename{see}
-\newcommand\andname{and}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsection{Date}
-%
-% \begin{macro}{\today}
-% This macro uses the \TeX\ primitives |\month|, |\day| and |\year|
-% to provide the date of the \LaTeX-run.
-% \begin{macrocode}
-\newcommand\today{\ifcase\month\or
- January\or February\or March\or April\or May\or June\or
- July\or August\or September\or October\or November\or December\fi
- \space\number\day, \number\year}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Two column mode}
-%
-% \begin{macro}{\columnsep}
-% This gives the distance between two columns in two column mode.
-% \begin{macrocode}
-\setlength\columnsep{10\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\columnseprule}
-% This gives the width of the rule between two columns in two
-% column mode. We have no visible rule.
-% \begin{macrocode}
-\setlength\columnseprule{0\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{The page style}
-%
-% We have \pstyle{plain} pages unless the user specified
-% otherwise. We use arabic pagenumbers.
-% \begin{macrocode}
-\pagestyle{plain}
-\pagenumbering{arabic} % Arabic page numbers
-% \end{macrocode}
-%
-% When the \Lopt{twocolumn} option was specified we call
-% |\twocolumn| to activate this mode. We try to make each column as
-% long as the others, but call |sloppy| to make our life easier.
-% \begin{macrocode}
-\if@twocolumn
- \twocolumn
- \sloppy
- \flushbottom
-% \end{macrocode}
-% Normally we call |\onecolumn| to initiate typesetting in one
-% column.
-% \begin{macrocode}
-\else
- \onecolumn
-\fi
-% \end{macrocode}
-%
-% \begin{macro}{\frenchspacing}
-% Controls the amount of space after a punctuation mark.
-% \begin{macrocode}
-\frenchspacing
-%</class>
-% \end{macrocode}
-% \end{macro}
-%
-% \Finale
-%
-\endinput
-%
diff --git a/Master/texmf-dist/source/latex/ntgclass/wijzer.dtx b/Master/texmf-dist/source/latex/ntgclass/wijzer.dtx
deleted file mode 100644
index 9033f939acb..00000000000
--- a/Master/texmf-dist/source/latex/ntgclass/wijzer.dtx
+++ /dev/null
@@ -1,3560 +0,0 @@
-% \CheckSum{0}
-%
-%
-% \iffalse
-%<*dtx>
-\Providesfile{wijzer.dtx}
-%</dtx>
-%<class>\NeedsTeXFormat{LaTeX2e}
-%<class>\ProvidesClass{wijzer}
-%<driver>\ProvidesFile{wijzer.drv}
-%\Providesfile{wijzer.dtx}
- [PTT Research computer handboeken]
-%
-%<*driver>
-\documentclass{ptt-ltxdoc}
-\usepackage[dutch]{babel}
-\CodelineNumbered
-\CodelineIndex
-\EnableCrossrefs
-\DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
-\DoNotIndex{\@centercr,\@cite}
-\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
-\DoNotIndex{\@input,\@ixpt,\@m}
-\DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
-\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
-\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
-\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
-\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
-\DoNotIndex{\advance,\Alph,\alph}
-\DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
-\DoNotIndex{\bullet}
-\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
-\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
-\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
-\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
-\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
-\DoNotIndex{\fbox}
-\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
-\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
-\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
-\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
-\DoNotIndex{\input}
-\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
-\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
-\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
-\DoNotIndex{\NeedsTeXFormat,\newdimen}
-\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
-\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
-\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
-\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
-\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
-\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
-\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
-\DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
-\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
-\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
-\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
-\DoNotIndex{\viipt,\vipt,\vskip,\vspace}
-\DoNotIndex{\wd,\xiipt,\year,\z@}
-\newcommand{\m}[1]{\mbox{$\langle$\it #1\/$\rangle$}}
-\providecommand{\marg}[1]{{\ttfamiliy\char`\{}\m{#1}{\ttfamiliy\char`\}}}
-\providecommand{\oarg}[1]{{\ttfamiliy[}\m{#1}{\ttfamiliy]}}
-\begin{document}
-\DocInput{wijzer.dtx}
-\clearpage
-\PrintIndex
-\end{document}
-%</driver>
-% \fi
-%
-% \GetFileInfo{wijzer.dtx}
-% \title{Document Class \texttt{wijzer}}
-% \author{Johannes Braams}
-% \date{Version~\fileversion, dated~\filedate}
-% \maketitle
-% \tableofcontents
-% \clearpage
-%
-% \StopEventually{} ^^A
-%
-% \section{Introduction}
-%
-% \section{The {\sc docstrip} modules}
-%
-% The following modules are used in the implementation to direct
-% {\sc docstrip} in generating the external files:
-% \begin{center}
-% \begin{tabular}{ll}
-% class & produce the document class\\
-% type1 & produce the `1' variants of the classes\\
-% type3 & produce the `3' variants of the classes\\
-% driver & produce a documentation driver file \\
-% \end{tabular}
-% \end{center}
-%
-% \section{Initial Code}
-%
-% In this part we define a few commands that are used later on.
-%
-% \begin{macro}{\@ptsize}
-% This control sequence is used to store the second digit of the
-% pointsize we are typesetting in. So, normally, it's value is one
-% of 0, 1 or 2.
-% \begin{macrocode}
-%<*class>
-\newcommand\@ptsize{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@restonecol}
-% When the document has to printed in two columns, we sometimes
-% have to temporarily switch to one column. This switch is used to
-% remember to switch back.
-% \begin{macrocode}
-\newif\if@restonecol
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@titlepage}
-% A switch to indicate if a titlepage has to be produced.
-% \begin{macrocode}
-\newif\if@titlepage
-\@titlepagetrue
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@openright}
-% A switch to indicate if chapters must start on a right-hand page.
-% The default for the report class is no; for the book class it's
-% yes.
-% \begin{macrocode}
-\newif\if@openright
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@openbib}
-% A switch to indicate if the bibliography has to be produced in
-% the ``open'' format. The default is to use a ``closed'' format.
-% \begin{macrocode}
-\newif\if@openbib
-\@openbibfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@oldtoc}
-% A switch to indicate if `old' layout of the table of contents
-% should be produced. These document classes normally produce a
-% table of contents that looks quite different from what the
-% standard classes produce.
-% \begin{macrocode}
-\newif\if@oldtoc
-\@oldtocfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@allcaps}
-% By default the text on the titlepage is set in capital letters.
-% This can be disabled by the option \Lopt{mctitle}, which sets the
-% switch |\if@allcaps| to false.
-% \begin{macrocode}
-\newif\if@allcaps
-% \end{macro}
-%
-% \begin{macro}{\if@titlecentered}
-% In the document classes \file{wijzer3} the
-% default placement of the title that is produced by |\maketitle|
-% is flushleft. This can be changed by the switch
-% |\if@titlecentered|.
-% \begin{macrocode}
-%<+type3>\newif\if@titlecentered
-%<+type3>\@titlecenteredfalse
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\if@revlabel}
-% These document classes need to be able to change the positioning
-% of the label in labeled lists. This switch is used for that
-% purpose.
-% \begin{macrocode}
-\newif\if@revlabel
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Declaration of Options}
-%
-%
-% \subsection{Setting Paper Sizes}
-%
-% The variables |\paperwidth| and |\paperheight| should reflect the
-% physical paper size after trimming. For desk printer output this
-% is usually the real paper size since there is no post-processing.
-% Classes for real book production will probably add other paper
-% sizes and additionally the production of crop marks for trimming.
-% \begin{macrocode}
-\DeclareOption{a4paper}
- {\setlength\paperheight {297mm}%
- \setlength\paperwidth {210mm}}
-\DeclareOption{a5paper}
- {\setlength\paperheight {210mm}%
- \setlength\paperwidth {148mm}}
-\DeclareOption{b5paper}
- {\setlength\paperheight {250mm}%
- \setlength\paperwidth {176mm}}
-\DeclareOption{letterpaper}
- {\setlength\paperheight {11in}%
- \setlength\paperwidth {8.5in}}
-\DeclareOption{legalpaper}
- {\setlength\paperheight {14in}%
- \setlength\paperwidth {8.5in}}
-\DeclareOption{executivepaper}
- {\setlength\paperheight {10.5in}%
- \setlength\paperwidth {7.25in}}
-% \end{macrocode}
-%
-% The option \Lopt{landscape} switches the values of |\paperheight|
-% and |\paperwidth|, assuming the dimensions wer given for portrait
-% paper.
-% \begin{macrocode}
-\DeclareOption{landscape}
- {\setlength\@tempdima {\paperheight}%
- \setlength\paperheight {\paperwidth}%
- \setlength\paperwidth {\@tempdima}}
-% \end{macrocode}
-%
-% \subsection{Choosing the type size}
-%
-% The type size options are handled by defining |\@ptsize| to contain
-% the last digit of the size in question and branching on |\ifcase|
-% statements. This is done for historical reasons to stay compatible
-% with other packages that use the |\@ptsize| variable to select
-% special actions. It makes the declarations of size options less
-% than 10pt difficult, although one can probably use \texttt{9}
-% and \texttt{8} assuming that a class won't define both
-% \Lopt{8pt} and \Lopt{18pt} options.
-%
-% \begin{macrocode}
-\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
-\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
-\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
-% \end{macrocode}
-%
-%
-% \subsection{Two-side or one-side printing}
-%
-% For two-sided printing we use the switch |\if@twoside|. In
-% addition we have to set the |\if@mparswitch| to get any margin
-% paragraphs into the outside margin.
-% \begin{macrocode}
-\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
-\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
-% \end{macrocode}
-%
-%
-% \subsection{Draft option}
-%
-% If the user requests \Lopt{draft} we show any overfull boxes.
-% We could probably add some more interesting stuff to this option.
-% \begin{macrocode}
-\DeclareOption{draft}{\setlength\overfullrule{5pt}}
-\DeclareOption{final}{\setlength\overfullrule{0pt}}
-% \end{macrocode}
-%
-% \subsection{Titlepage option}
-% An article usually has no separate titlepage, but the user can
-% request one.
-% \begin{macrocode}
-\DeclareOption{titlepage}{\@titlepagetrue}
-\DeclareOption{notitlepage}{\@titlepagefalse}
-% \end{macrocode}
-%
-% \subsection{openright option}
-% This option determines whether or not a chapter must start on
-% a right-hand page
-% request one.
-% \begin{macrocode}
-\DeclareOption{openright}{\@openrighttrue}
-\DeclareOption{openany}{\@openrightfalse}
-% \end{macrocode}
-%
-% For these document classes there used to be a file
-% \file{voorwerk.sty} which was a replacement for
-% \file{titlepag.sty}. Therefore we also have the option
-% \Lopt{voorwerk}.
-% \begin{macrocode}
-\DeclareOption{voorwerk}{\@titlepagetrue}
-\DeclareOption{geenvoorwerk}{\@titlepagefalse}
-% \end{macrocode}
-%
-%
-% \subsection{Table of contents formatting}
-%
-% This document class uses a new layout for the table of contents,
-% but in order to maintain compatibility with the standard \LaTeXe
-% document classes we supply an extra option: \Lopt{oldtoc}. If
-% this option is specified the switch |\if@oldtoc| will be set
-% true.
-% \begin{macrocode}
-\DeclareOption{oldtoc}{\@oldtoctrue}
-% \end{macrocode}
-%
-% \subsection{Formatting of the title}
-%
-% The option \Lopt{titlecentered} changes the behaviour of the
-% |\maketitle| command. It then produces a title like it does for
-% the \file{artikel1} document class.
-% \begin{macrocode}
-%<+type3>\DeclareOption{titlecentered}{\@titlecenteredtrue}
-% \end{macrocode}
-%
-% In this document class the titlepage uses all capital
-% letters. The option \Lopt{mctitle} (for `mixed case') prevents
-% this.
-% \begin{macrocode}
-\DeclareOption{mctitle}{\@allcapsfalse}
-\DeclareOption{uctitle}{\@allcapstrue}
-% \end{macrocode}
-%
-% \subsection{Twocolumn printing}
-%
-% Two-column and one-column printing is again realized via a switch.
-% \begin{macrocode}
-\DeclareOption{onecolumn}{\@twocolumnfalse}
-\DeclareOption{twocolumn}{\@twocolumntrue}
-% \end{macrocode}
-%
-% \subsection{Equation numbering on the left}
-%
-% The option \Lopt{leqno} can be used to get the equation numbers
-% on the left side of the equation.
-% \begin{macrocode}
-\DeclareOption{leqno}{\input{leqno.clo}}
-% \end{macrocode}
-%
-% \subsection{Flush left displays}
-%
-% The option \Lopt{fleqn} redefines the displayed math environmens
-% in such a way that they come out flush left, with an indentation
-% of |\mathindent| from the prevailing left margin.
-% \begin{macrocode}
-\DeclareOption{fleqn}{\input{fleqn.clo}}
-% \end{macrocode}
-%
-% \subsection{Open bibliography}
-%
-% The option \Lopt{openbib} produces the ``open'' bibliography
-% style, in which each block starts on a new line, and succeeding
-% lines in a block are indented by |\bibindent|.
-% \begin{macrocode}
-\DeclareOption{openbib}{\@openbibtrue}
-% \end{macrocode}
-%
-%
-% \section{Executing Options}
-%
-% Here we execute the default options to initialize certain
-% variables.
-% \begin{macrocode}
-\ExecuteOptions{a4paper,10pt,oneside,onecolumn,final,uctitle,openany}
-% \end{macrocode}
-%
-% The |\ProcessOptions| command causes the execution of the code
-% for every option \Lopt{FOO}
-% which is declared and for which the user typed
-% the \Lopt{FOO} option in his
-% |\documentclass| command. For every option \Lopt{BAR} he typed,
-% which is not declared, the option is assumed to be a global option.
-% All options will be passed as document options to any
-% |\usepackage| command in the document preamble.
-% \begin{macrocode}
-\ProcessOptions
-% \end{macrocode}
-% Now that all the options have been executed we can load the
-% chosen class option file that contains all size dependent code.
-% \begin{macrocode}
-\input{ntg1\@ptsize.clo}
-% \end{macrocode}
-%
-% \section{Loading Packages}
-%
-% These class files do not load additional packages.
-%
-%
-% \section{Document Layout}
-% \label{sec:maincode}
-%
-% In this section we are finally dealing with the nasty typographical
-% details.
-%
-% \subsection{Paragraphing}
-%
-% \begin{macro}{\lineskip}
-% \begin{macro}{\normallineskip}
-% These parameters control \TeX's behaviour when two lines tend to
-% come too close together.
-% \begin{macrocode}
-\setlength\lineskip{1\p@}
-\setlength\normallineskip{1\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\baselinestretch}
-% This is used as a multiplier for |\baselineskip|. The default is
-% to {\em not\/} stretch the baselines.
-% \begin{macrocode}
-\renewcommand\baselinestretch{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\unitindent}
-% These document classes all use a single dimension for a number of
-% layout parameters:
-% \begin{itemize}
-% \item the label width in section heading,
-% \item the |\parindent|
-% \item the footnote label indent (= half |\unitindent|)
-% \item listindent on the first level
-% \end{itemize}
-% \begin{macrocode}
-\newdimen\unitindent
-% \end{macrocode}
-% The default setting accomodates three levels of single digit
-% section numbering.
-% \begin{macrocode}
-{\setbox0\hbox{\normalsize\rmfamily 2.2.2\hskip.5em}
- \global\unitindent=\wd0}
-% \end{macrocode}
-%
-% \begin{macro}{\othermargin}
-% Other indentations are maximal label width plus white space.
-% \begin{macrocode}
-\newdimen\othermargin
-{\setbox0\hbox{\normalsize (m)\hskip.6em}\global\othermargin=\wd0}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{if@needwriteindent}
-% If this is not enough, a new width is calculated, set, and the
-% file{.aux} file contains an instruction that will set
-% |\unitindent| on the next run.
-%
-% For this we need a switch
-% \begin{macrocode}
-\newif\if@needwriteindent
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@indentset}
-% And a command that sets the various parameters.
-% \begin{macrocode}
-\newcommand\@indentset{%
-%<-type3> \global\parindent=\unitindent
- \global\leftmargini=\unitindent
- \global\@needwriteindenttrue}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@writeindent}
-% The |\end{document}| command will call |\@writeindent| to write
-% the final width of |\unitindent| on the \file{.aux} file. Also a
-% command is written to set |\unitindent|. To be compatible with
-% other document classes a check is written to the \file{.aux} file
-% for the existence of |\unitindent|. This prevents nasty errors
-% when another document class is used.
-% \begin{macrocode}
-\newcommand\@writeindent[1]{\immediate\write\@mainaux
- {\string\@ifundefined{unitindent}{\string\newdimen\string\unitindent
- \let\string\@indentset\relax}{}}
- \immediate\write\@mainaux{\global\string\unitindent=#1\string\relax
- \string\@indentset \string\relax}}
-% \end{macrocode}
-% \end{macro}
-%
-% We need to use the hook into |\end{document}| to write the final
-% value of |\unitindent| om the file{.aux} file for the next run.
-% \begin{macrocode}
-\AtEndDocument{%
- \if@filesw
- \if@needwriteindent
- \@writeindent{\the\unitindent}
- \fi
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\parskip}
-% \begin{macro}{\parindent}
-% |\parskip| gives extra vertical space between paragraphs and
-% |\parindent| is the width of the paragraph indentation. The value
-% of |\parindent| depends on whether we are in two column mode.
-% \begin{macrocode}
-%<*type1>
-\setlength\parskip{0\p@}
-\setlength\parindent{\unitindent}
-%</type1>
-%<*type3>
-\setlength\parskip{.5\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip}
-\setlength\parindent{\z@}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@lowpenalty}
-% \begin{macro}{\@medpenalty}
-% \begin{macro}{\@highpenalty}%
-% The commands |\nopagebreak| and |\nolinebreak| put in penalties
-% to discourage these breaks at the point they are put in.
-% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|,
-% dependent on their argument.
-% \begin{macrocode}
-\@lowpenalty 51
-\@medpenalty 151
-\@highpenalty 301
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\clubpenalty}
-% \begin{macro}{\widowpenalty}
-% These penalties are use to discourrage club and widow lines.
-% Because we use their default values we only show them here,
-% commented out.
-% \begin{macrocode}
-% \clubpenalty 150
-% \widowpenalty 150
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\displaywidowpenalty}
-% \begin{macro}{\predisplaypenalty}
-% \begin{macro}{\postdisplaypenalty}
-% Discourrage (but not so much) widows in front of a math display
-% and forbid breaking directly in front of a display. Allow break
-% after a display without a penalty. Again the default values are
-% used, therefore we only show them here.
-% \begin{macrocode}
-% \displaywidowpenalty 50
-% \predisplaypenalty 10000
-% \postdisplaypenalty 0
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\interlinepenalty}
-% Allow the breaking of a page in the middle of a paragraph.
-% \begin{macrocode}
-% \interlinepenalty 0
-% \end{macrocode}
-% \end{macro}
-%
-%
-% \begin{macro}{\brokenpenalty}
-% We allow the breaking of a page after a hyphenated line.
-% \begin{macrocode}
-% \brokenpenalty 0
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Float placement parameters}
-%
-% All float parameters are given default values in the \LaTeXe{}
-% kernel. For this reason counters only need to be set with
-% |\setcounter| and other parameters are set using |\renewcommand|.
-%
-% \paragraph{Limits for the placement of floating objects}
-%
-% \begin{macro}{\c@topnumber}
-% The \Lcount{topnumber} counter holds the maximum number of
-% floats that can appear on the top of a text page.
-% \begin{macrocode}
-\setcounter{topnumber}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\topfraction}
-% This indicates the maximum part of a text page that can be
-% occupied by floats at the top.
-% \begin{macrocode}
-\renewcommand\topfraction{.7}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@bottomnumber}
-% The \Lcount{bottomnumber} counter holds the maximum number of
-% floats that can appear on the bottom of a text page.
-% \begin{macrocode}
-\setcounter{bottomnumber}{1}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\bottomfraction}
-% This indicates the maximum part of a text page that can be
-% occupied by floats at the bottom.
-% \begin{macrocode}
-\renewcommand\bottomfraction{.3}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@totalnumber}
-% This indicates the maximum number of floats that can appear on
-% any text page.
-% \begin{macrocode}
-\setcounter{totalnumber}{3}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\textfraction}
-% This indicates the minimum part of a text page that has to be
-% occupied by text.
-% \begin{macrocode}
-\renewcommand\textfraction{.2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\floatpagefraction}
-% This indicates the minimum part of a page that has to be
-% occupied by floating objects before a `float page' is produced.
-% \begin{macrocode}
-\renewcommand\floatpagefraction{.5}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@dbltopnumber}
-% The \Lcount{dbltopnumber} counter holds the maximum number of
-% two column floats that can appear on the top of a two column text
-% page.
-% \begin{macrocode}
-\setcounter{dbltopnumber}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\dbltopfraction}
-% This indicates the maximum part of a two column text page that
-% can be occupied by two column floats at the top.
-% \begin{macrocode}
-\renewcommand\dbltopfraction{.7}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\dblfloatpagefraction}
-% This indicates the minimum part of a page that has to be
-% occupied by two column wide floating objects before a `float
-% page' is produced.
-% \begin{macrocode}
-\renewcommand\dblfloatpagefraction{.5}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Page Styles}
-%
-% The page style \pstyle{foo} is defined by defining the command
-% |\ps@foo|. This command should make only local definitions.
-% There should be no stray spaces in the definition, since they
-% could lead to mysterious extra spaces in the output (well, that's
-% something that should be always avoided).
-%
-% \begin{macro}{\@evenhead}
-% \begin{macro}{\@oddhead}
-% \begin{macro}{\@evenfoot}
-% \begin{macro}{\@oddfoot}
-% The |\ps@...| command defines the macros |\@oddhead|,
-% |\@oddfoot|, |\@evenhead|, and |\@evenfoot| to define the running
-% heads and feet---e.g., |\@oddhead| is the macro to produce the
-% contents of the heading box for odd-numbered pages. It is called
-% inside an |\hbox| of width |\textwidth|.
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\thispagestyle}
-% Several commands (|\index|, |\maketitle|) give a
-% |\thispagestyle{plain}| command, which will overrule a
-% |\pagestyle{empty}| command. This situation is almost always
-% unwanted. Therefore we provide a more careful definition.
-%
-% First save the original definition.
-% \begin{macrocode}
-\let\Thispagestyle\thispagestyle
-% \end{macrocode}
-% Then we provide the new definition, for which we must also adapt
-% |\pagestyle| a little.
-% \begin{macrocode}
-\newcommand\@emptypagestyle{empty}
-\renewcommand\pagestyle[1]{\@nameuse{ps@#1}\def\@currentpagestyle{#1}}
-\renewcommand\thispagestyle[1]{%
- \ifx\@currentpagestyle\@emptypagestyle
- \else
- \global\@specialpagetrue
- \gdef\@specialstyle{#1}%
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Marking conventions}
-%
-% To make headings determined by the sectioning commands, the page
-% style defines the commands |\chaptermark|, |\sectionmark|,
-% \ldots,\\
-% where |\chaptermark{|\meta{TEXT}|}| is called by
-% |\chapter| to set a mark, and so on.
-%
-% The |\...mark| commands and the |\...head| macros are defined
-% with the help of the following macros. (All the |\...mark|
-% commands should be initialized to no-ops.)
-%
-% \LaTeX{} extends \TeX's |\mark| facility by producing two kinds
-% of marks, a `left' and a `right' mark, using the following
-% commands:
-% \begin{flushleft}
-% |\markboth{|\meta{LEFT}|}{|\meta{RIGHT}|}|: Adds both marks.
-%
-% |\markright{|\meta{RIGHT}|}|: Adds a `right' mark.
-%
-% |\leftmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
-% or |\@evenfoot| macros, it gets the current `left'
-% mark. |\leftmark| works like \TeX's |\botmark|
-% command.
-%
-% |\rightmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
-% or |\@evenfoot| macros, it gets the current
-% `right' mark. |\rightmark| works like \TeX's
-% |\firstmark| command.
-% \end{flushleft}
-%
-% The marking commands work reasonably well for right marks
-% `numbered within' left marks--e.g., the left mark is changed by a
-% |\chapter| command and the right mark is changed by a |\section|
-% command. However, it does produce somewhat anomalous results if
-% two |\markboth|'s occur on the same page.
-%
-%
-% Commands like |\tableofcontents| that should set the marks in some
-% page styles use a |\@mkboth| command, which is |\let| by the
-% pagestyle command (|\ps@...|) to |\markboth| for setting the
-% heading or to |\@gobbletwo| to do nothing.
-%
-%
-% \begin{macrocode}
-% %%%\mark{{}{}} % Initializes TeX's marks <--- can vanish
-% \end{macrocode}
-%
-% \subsubsection{Defining the page styles}
-% \label{sec:pagestyle}
-%
-% The pagestyle \pstyle{empty} is defined in \file{latex.dtx}, but
-% the pagestyle \pstyle{plain} is slightly altered here. The
-% difference is that the page numbers are set flush right in
-% onesided and flush left and right in the twosided style.
-%
-% \begin{macro}{\ps@plain}
-%
-% \begin{macrocode}
-\renewcommand\ps@plain{%
-% \end{macrocode}
-% The running head are empty in this pagestyle, the page number
-% appears in the running foot.
-% \begin{macrocode}
- \let\@oddhead\@empty\let\@evenhead\@empty
- \def\@oddfoot{\hfil\PageFont\thepage}%
- \if@twoside
- \def\@evenfoot{\PageFont\thepage\hfil}%
- \else
- \let\@evenfoot\@oddfoot
- \fi
-% \end{macrocode}
-% Because the running heads should be empty we |let| |\@mkboth| to
-% |\@gobbletwo|, thus disabling the mark commands.
-% \begin{macrocode}
- \let\@mkboth\@gobbletwo}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ps@headings}
-% The definition of the page style \pstyle{headings} has to be
-% different for two sided printing than it is for one sided
-% printing.
-%
-% \begin{macrocode}
-\if@twoside
- \def\ps@headings{%
-% \end{macrocode}
-% The running feet are empty in this page style, the running head
-% contains the page number and one of the marks.
-% \begin{macrocode}
- \let\@oddfoot\@empty\let\@evenfoot\@empty
- \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}%
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
-% \end{macrocode}
-%
-% When using this page style, the contents of the running head is
-% determined by the chapter and section titles. So we |\let|
-% |\@mkboth| to |\markboth|.
-% \begin{macrocode}
- \let\@mkboth\markboth
-% \end{macrocode}
-%
-% In thisdocument class we use the |\chaptermark|
-% and |\sectionmark| macros to fill the running heads.
-%
-% Note the use of |##1| for the parameter of the |\chaptermark|
-% command, which will be defined when |\ps@headings| is executed.
-%
-% \begin{macrocode}
- \def\chaptermark##1{%
- \markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne
- \@chapapp\ \thechapter. \ \fi
- ##1}}{}}%
- \def\sectionmark##1{%
- \markright {\uppercase{\ifnum \c@secnumdepth >\z@
- \thesection. \ \fi
- ##1}}}}
-% \end{macrocode}
-%
-% The definition of |\ps@headings| for one sided printing can be
-% much simpler, because we treat even and odd pages the same.
-% Therefore we don't need to define |\@even...|.
-% \begin{macrocode}
-\else
- \def\ps@headings{%
- \let\@oddfoot\@empty
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
- \let\@mkboth\markboth
-% \end{macrocode}
-% We use |\markright| now instead of |\markboth| as we did for two
-% sided printing.
-% \begin{macrocode}
- \def\chaptermark##1{%
- \markright {\uppercase{\ifnum \c@secnumdepth >\m@ne
- \@chapapp\ \thechapter. \ \fi
- ##1}}}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ps@myheadings}
-% The definition of the page style \pstyle{myheadings} is fairly
-% simple because the user determines the contents of the running
-% head himself by using the |\markboth| and |\markright| commands.
-%
-% \begin{macrocode}
-\def\ps@myheadings{%
- \let\@oddfoot\@empty\let\@evenfoot\@empty
- \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}%
- \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}%
-% \end{macrocode}
-%
-% We have to make sure that the marking commands that are used by
-% the chapter and section headings are disabled. We do this
-% |\let|ting them to a macro that gobbles its argument(s).
-% \begin{macrocode}
- \let\@mkboth\@gobbletwo
- \let\chaptermark\@gobble
- \let\sectionmark\@gobble
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\PageFont}
-% \begin{macro}{\MarkFont}
-% These macros are use to store the fonts that are used to typeset
-% the pagenumber (|\PageFont|) and the marks (|\MarkFont|) in the
-% running head and feet.
-% \begin{macrocode}
-\newcommand\PageFont{\rmfamily}
-\newcommand\MarkFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\RunningFonts}
-% Use this macro to change the fonts that are used in the running
-% heads.
-% \begin{macrocode}
-\newcommand\RunningFonts[2]{%
- \renewcommand\PageFont{#1}\renewcommand\MarkFont{#2}}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Document Markup}
-%
-% \subsection{The title}
-%
-% \begin{macro}{\title}
-% \begin{macro}{\author}
-% \begin{macro}{\date}
-% These three macros are provided by \file{latex.dtx} to provide
-% information about the title, author(s) and date of the document.
-% The information is stored away in internal control sequences.
-% It is the task of the |\maketitle| command to use the
-% information provided. The definitions of these macros are shown
-% here for information.
-% \begin{macrocode}
-% \newcommand\title[1]{\gdef\@title{#1}}
-% \newcommand\author[1]{\gdef\@author{#1}}
-% \newcommand\date[1]{\gdef\@date{#1}}
-% \end{macrocode}
-% The |\date| macro gets today's date by default.
-% \begin{macrocode}
-% \gdef\@date{\today}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\TitleFont}
-% This selects the font to use in the title of the document.
-% \begin{macrocode}
-\newcommand\TitleFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\maketitle}
-% The definition of |\maketitle| depends on whether a seperate
-% title page is made. This is the default for this document class.
-% Note that the title, author and date information is printed in
-% capital letters by default. This can be changed by the option
-% \Lopt{mctitle}.
-%
-% When we are making a title page, we locally redefine
-% |\footnotesize| and |\footnoterule| to change the appearance of
-% the footnotes that are produced by the |\thanks| command.
-% \begin{macrocode}
-\renewcommand\TitleFont{\rmfamily}
-\newcommand\maketitle{%
- \begin{titlepage}%
- \let\footnotesize\small
- \let\footnoterule\relax
-% \end{macrocode}
-% Footnotes on the titlepage, generated by the use of |\thanks|,
-% use symbols in these document classes.
-% \begin{macrocode}
- \long\def\@makefntext##1{\parindent\z@
- \def\labelitemi{--}\@revlabeltrue
- \leavevmode$\m@th^{\@thefnmark}$\kern1em\relax ##1}
- \renewcommand\thefootnote{\fnsymbol{footnote}}%
-% \end{macrocode}
-% We center the entire title vertically; the centering is set off a
-% little by adding a |\vskip|. In compatibility mode the pagenumber
-% is set to 0 to keep the behaviour of \LaTeX\ 2.09 style files
-% \begin{macrocode}
- \if@compatibility\setcounter{page}{0}\fi
- \null\vfil
- \vskip 60\p@
-% \end{macrocode}
-% Then we set the title, in a |\LARGE| font; leave a little space
-% and set the author(s) in a |\large| font. We do this inside a
-% tabular environment to get them in a single column.
-% Before the date we leave a little whitespace again.
-% \begin{macrocode}
- \begin{center}%
- \TitleFont
- {\LARGE \def\\{\penalty -\@M}
- \if@allcaps
- \expandafter\uc@nothanks\@title\thanks\relax
- \else
- \@title
- \fi\par}%
- \vskip 3em%
- {\large
- \lineskip .75em \parindent\z@
- \begin{tabular}[t]{c}%
- \if@allcaps
- \expandafter\uc@authornothanks\@author\and\relax
- \else
- \@author
- \fi
- \end{tabular}\par}%
- \vskip 1.5em%
- {\large
- \if@allcaps
- \uppercase\expandafter{\@date}%
- \else
- \@date
- \fi\par}%
- \end{center}\par
-% \end{macrocode}
-% Then we call |\@thanks| to print the information that goes into
-% the footnote and finish the page.
-% \begin{macrocode}
- \@thanks
- \vfil\null
- \end{titlepage}%
-% \end{macrocode}
-% We reset the \Lcount{footnote} counter, disable |\thanks| and
-% |\maketitle| and save some storage space by emptying the internal
-% information macros.
-% \begin{macrocode}
- \setcounter{footnote}{0}%
- \let\thanks\relax\let\maketitle\relax
- \gdef\@thanks{}\gdef\@author{}\gdef\@title{}}
-% \end{macrocode}
-%
-% We want to have the title, author and date information in
-% uppercase, but we have to be very carefull not to put too much
-% text in uppercase. The macros that perform the filtering of texts
-% that shouldn't be in uppercase were developped with th help of
-% Howard Trickey.
-%
-% \begin{macro}{\uc@nothanks}
-% This macro takes all the text up to the first use of |\thanks|
-% and passes it to |\uppercase|. The use of |\futurelet| will store
-% the token \emph{after} the |\thanks| in |\@tempa|. The macro
-% |\u@tx| uses that information to determine what to do next.
-% \begin{macrocode}
-\def\uc@nothanks#1\thanks{\uppercase{#1}\futurelet\@tempa\uc@tx}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@authornothanks}
-% A document can have more than one author. Usually they are
-% seperated with |\and|. For each author a footnote --using
-% |\thanks| can be present. Therefore this macro takes all the text
-% up to the first use of |\and|, thus picking up all the
-% information for one author. This is than passsed to
-% |\uc@nothanks|, which checks for the presence of |\thanks|. For
-% this to work the argument of |\uc@nothanks| has to be delimited
-% by |\thanks\relax|.
-% \begin{macrocode}
-\def\uc@authornothanks#1\and{\uc@nothanks#1\thanks\relax
-% \end{macrocode}
-% Then we have to check whether the |\and| we ound earlier was put
-% in by the user, in which case information for another user will
-% follow, or by the call from another macro, in which case the
-% |\and| will be followed by a |\relax| token. The |\futurelet|
-% contstruct stores the first token \emph{after} the |\and| in
-% |\@tempa| to be inspected by |\u@ax|.
-% \begin{macrocode}
- \futurelet\@tempa\uc@ax}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@ax}
-% When |\@tempa| contains a |\relax| token nothing needs to be
-% done, when it doesn't we put in a linebreak |\\| the word `and'
-% (stored in |\andname| so that this control sequence can be
-% redeined for other languages), another linebreak and we call
-% |\uc@authornothanks| to continue processing. The |\expandafter|
-% lets \TeX\ see the |\fi| first.
-% \begin{macrocode}
-\def\uc@ax{%
- \ifx\@tempa\relax
- \else
- \\ \andname \\ \expandafter\uc@authornothanks
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@tx}
-% This macro simply checks whether |\@tempa| contains a |\relax|
-% token. When it doesn't further processing is performed by
-% |\u@ty|.
-% \begin{macrocode}
-\def\uc@tx{\ifx\@tempa\relax
- \else \expandafter\uc@ty \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\uc@ty}
-% The macro |\uc@ty| gets executed when the |\thanks| that
-% delimited text earlier on in the processing had a real argument.
-% In that case it was a |\thanks| put in by the user, \emph{not} by
-% these macros. Therefore the argument is now passed to |\thanks|
-% and processing continues by calling |\uc@nothanks|.
-% \begin{macrocode}
-\def\uc@ty#1{\thanks{#1}\uc@nothanks}
-% \end{macrocode}
-% \end{macro}
-%
-% When the title is not on a page of its own, the layout of the
-% title is a little different. We use symbols to mark the footnotes
-% and we have to deal with two column documents.
-%
-% Therefore we first start a new group to keep changes local. Then
-% we redefine |\thefootnote| to use |\fnsymbol|; and change
-% |\@makefnmark| so that footnotemarks have zero width (to make the
-% centering of the author names look better). We also want raised
-% footnotemarkers in the footnotes here.
-% \begin{macrocode}
-\else
-\newcommand\maketitle{\par
- \begingroup
- \renewcommand\thefootnote{\fnsymbol{footnote}}%
- \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}%
- \def\@makefntext{\@xmakefntext{$\m@th^{\@thefnmark}$}}%
-% \end{macrocode}
-% If this is a twocolumn document we start a new page in twocolumn
-% mode, with the title set to the full width of the text. The
-% actual printing of the title information is left to
-% |\@maketitle|.
-% \begin{macrocode}
- \if@twocolumn
- \ifnum \col@number=\@ne
- \@maketitle
- \else
- \twocolumn[\@maketitle]%
- \fi
- \else
-% \end{macrocode}
-% When this is not a twocolumn document we just start a new page,
-% prevent floating objects from appearing on the top of this page
-% and print the title information.
-% \begin{macrocode}
- \newpage
- \global\@topnum\z@
- \@maketitle
- \fi
-% \end{macrocode}
-% This page gets a \pstyle{plain} layout. We call |\@thanks| to
-% produce the footnotes.
-% \begin{macrocode}
- \thispagestyle{plain}\@thanks
-% \end{macrocode}
-% Now we can close the group, reset the \Lcount{footnote} counter,
-% disable |\thanks|, |\maketitle| and |\@maketitle| and save some
-% storage space by emptying the internal information macros.
-% \begin{macrocode}
- \endgroup
- \setcounter{footnote}{0}%
- \let\thanks\relax
- \let\maketitle\relax\let\@maketitle\relax
- \gdef\@thanks{}\gdef\@author{}\gdef\@title{}}
-% \end{macrocode}
-%
-% \begin{macro}{\@maketitle}
-% This macro takes care of formatting the title information when we
-% have no seperate title page.
-%
-% We always start a new page, leave some white space and center the
-% information. The title is set in a |\LARGE| font, the author
-% names and the in a |\large| font.
-% \begin{macrocode}
-\def\@maketitle{%
- \newpage
- \null
- \vskip 2em%
-%<+type3>\if@titlecentered
- \begin{center}%
- {\LARGE \TitleFont \@title \par}%
- \vskip 1.5em%
- {\large \TitleFont
- \lineskip .5em%
- \begin{tabular}[t]{c}%
- \@author
- \end{tabular}\par}%
- \vskip 1em%
- {\large \TitleFont \@date}%
- \end{center}%
-%<*type3>
- \else
- {\LARGE \TitleFont \head@style \@title \par} \vskip 1.5em
- {\large \TitleFont \lineskip .5em \tabcolsep\z@
- \def\and{%%% \begin{tabular} has already started
- \end{tabular}\hskip 1em plus .17fil
- \begin{tabular}[t]{l}}%% \end{tabular} will come
- \begin{tabular}[t]{l}\@author\end{tabular}\par}
- \vskip 1em {\large \TitleFont \@date}
- \fi
-%</type3>
- \par
- \vskip 1.5em}
-\fi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsection{Chapters and Sections}
-%
-% \subsubsection{Building blocks}
-% The definitions in this part of the class file make use of two
-% macros, |\@startsection| and |\secdef|, which are defined by
-% \file{latex.dtx}. To understand what is going on here, we
-% describe their syntax.
-%
-% The macro |\@startsection| has 6 required arguments, optionally
-% followed by a $*$, an optional argument and a required argument:
-%
-% |\@startsection|\meta{name}\meta{level}\meta{indent}^^A
-% \meta{beforeskip}\meta{afterskip}\meta{style}
-% optional *\\
-% \null\hphantom{\bslash @startsection}^^A
-% |[|\meta{altheading}|]|\meta{heading}
-%
-% It is a generic command to start a section, the arguments have
-% the following meaning:
-%
-% \begin{description}
-% \item[\meta{name}] The name of the user level command, e.g.,
-% `section'.
-% \item[\meta{level}] A number, denoting the depth of the section
-% -- e.g., chapter=1, section = 2, etc. A section number
-% will be printed if and only if \meta{level} $<=$ the value
-% of the \Lcount{secnumdepth} counter.
-% \item[\meta{indent}] The indentation of the heading from the left
-% margin
-% \item[\meta{beforeskip}] The absolute value of this argument
-% gives the skip to leave above the heading. If it is
-% negative, then the paragraph indent of the text following
-% the heading is suppressed.
-% \item[\meta{afterskip}] If positive, this gives the skip to leave
-% below the heading, else it gives the skip to leave to the
-% right of a run-in heading.
-% \item[\meta{style}] Commands to set the style of the heading.
-% \item[$*$] When this is missing the heading is numbered and the
-% corresponding counter is incremented.
-% \item[\meta{altheading}] Gives an alternative heading to use in
-% the table of contents and in the running heads. This should
-% be present when the $*$ form is used.
-% \item[\meta{heading}] The heading of the new section.
-% \end{description}
-% A sectioning command is normally defined to |\@startsection| and
-% its first six arguments.
-%
-% The macro |\secdef| can be used when a sectioning command is
-% defined without using |\@startsection|. It has two arguments:
-%
-% |\secdef|\meta{unstarcmds}\meta{starcmds}
-%
-% \begin{description}
-% \item[\meta{unstarcmds}] Used for the normal form of the
-% sectioning command.
-% \item[\meta{starcmds}] Used for the $*$-form of the
-% sectioning command.
-% \end{description}
-%
-% You can use |\secdef| as follows:
-% \begin{verbatim}
-% \def\chapter { ... \secdef \CMDA \CMDB }
-% \def\CMDA [#1]#2{ ... } % Command to define
-% % \chapter[...]{...}
-% \def\CMDB #1{ ... } % Command to define
-% % \chapter*{...}
-% \end{verbatim}
-%
-% \begin{macro}{\head@style}
-% In the definition of chapter and section commands a number of
-% settings frequently occur. Therefore we store them in a control
-% sequence.
-%
-% Section headings are to be set extremely raggedright, with no
-% hyphenations, not even at explicit hyphens.
-%
-% \begin{macrocode}
-\newcommand\head@style{%
- \interlinepenalty \@M
- \hyphenpenalty=\@M \exhyphenpenalty=\@M
- \rightskip=0cm plus .7\hsize\relax}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@sect}
-% The definition of this macro from \file{latex.dtx} needs to be
-% repeated here because we want to modify its behaviour with
-% respect to:
-% \begin{enumerate}
-% \item the width of the number, which is fixed;
-% \item checking the value of |\unitindent|;
-% \item formatting the section title ragged right;
-% \item changing the argument of |\contentsline|.
-% \end{enumerate}
-% \begin{macrocode}
-\def\@sect#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth
- \let\@svsec\@empty\else
- \refstepcounter{#1}%
-% \end{macrocode}
-% The following code (within the group) checks the value of
-% |\unitindent|. If the sectionnumber is wider than |\unitindent|
-% its value is adapted and a flag is set to rememeber to store the
-% new value in the \file{.aux}-file.
-% \begin{macrocode}
- \begingroup
- \setbox\@tempboxa=\hbox{#6\relax
- \csname the#1\endcsname
- \hskip.5em}
- \ifdim\wd\@tempboxa>\unitindent
- \global\unitindent=\wd\@tempboxa
- \@indentset
- \fi
- \endgroup
- \let\@@protect\protect
- \def\protect{\noexpand\protect\noexpand}%
- \edef\@svsec{\@seccntformat{#1}}%
- \let\protect\@@protect\fi
- \@tempskipa #5\relax
- \ifdim \@tempskipa>\z@
- \begingroup #6\relax
- \@hangfrom{\hskip #3\relax\@svsec}{\head@style #8\par}%
- \endgroup
- \csname #1mark\endcsname{#7}%
- \addcontentsline{toc}{#1}{%
- \ifnum #2>\c@secnumdepth
- \else
- \protect\numberline{\csname the#1\endcsname}%
- \fi
- \toc@font#2 #7}%
- \else
- \def\@svsechd{#6\hskip #3\relax
- \@svsec #8\csname #1mark\endcsname{#7}%
- \addcontentsline{toc}{#1}{%
- \ifnum #2>\c@secnumdepth
- \else
- \protect\numberline{\csname the#1\endcsname}%
- \fi
- \toc@font#2 #7}}%
- \fi
- \@xsect{#5}}
-% \end{macrocode}
-% This macro was introduced in \LaTeXe, its definition is changed
-% here to get the fixed with of the section number.
-% \begin{macrocode}
-\def\@seccntformat#1{%
- \hbox to \unitindent{\csname the#1\endcsname \hfil}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@ssect}
-% Similar changes need to be made to the definition of |\@ssect|,
-% which is used in `starred' sections.
-% \begin{macrocode}
-\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax
- \ifdim \@tempskipa>\z@
- \begingroup #4\relax
- \@hangfrom{\hskip #1}{\head@style #5\par}\endgroup
- \else \def\@svsechd{#4\hskip #1\relax #5}\fi
- \@xsect{#3}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Mark commands}
-%
-% \begin{macro}{\chaptermark}
-% \begin{macro}{\sectionmark}
-% \begin{macro}{\subsectionmark}
-% \begin{macro}{\subsubsectionmark}
-% \begin{macro}{\paragraphmark}
-% \begin{macro}{\subparagraphmark}
-% Default initializations of |\...mark| commands. These commands
-% are used in the definition of the page styles (see
-% section~\ref{sec:pagestyle}) Most of them are already defined by
-% \file{latex.ltx}, so they are only shown here.
-%
-% \begin{macrocode}
-\newcommand\chaptermark[1]{}
-% \newcommand\sectionmark[1]{}
-% \newcommand\subsectionmark[1]{}
-% \newcommand\subsubsectionmark[1]{}
-% \newcommand\paragraphmark[1]{}
-% \newcommand\subparagraphmark[1]{}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Define Counters}
-%
-% \begin{macro}{\c@secnumdepth}
-% The value of the counter \Lcount{secnumdepth} gives the depth of
-% the highest-level sectioning command that is to produce section
-% numbers.
-% \begin{macrocode}
-\setcounter{secnumdepth}{2}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@part}
-% \begin{macro}{\c@chapter}
-% \begin{macro}{\c@section}
-% \begin{macro}{\c@subsection}
-% \begin{macro}{\c@subsubsection}
-% \begin{macro}{\c@paragraph}
-% \begin{macro}{\c@subparagraph}
-% These counters are used for the section numbers. The macro\\
-% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\
-% defines \meta{newctr} to be a counter, which is reset to zero when
-% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must
-% already be defined.
-%
-% \begin{macrocode}
-\newcounter {part}
-\newcounter {chapter}
-\newcounter {section}[chapter]
-\newcounter {subsection}[section]
-\newcounter {subsubsection}[subsection]
-\newcounter {paragraph}[subsubsection]
-\newcounter {subparagraph}[paragraph]
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\thepart}
-% \begin{macro}{\thechapter}
-% \begin{macro}{\thesection}
-% \begin{macro}{\thesubsection}
-% \begin{macro}{\thesubsubsection}
-% \begin{macro}{\theparagraph}
-% \begin{macro}{\thesubparagraph}
-% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines
-% the printed version of counter \Lcount{CTR}. It is defined in
-% terms of the following macros:
-%
-% |\arabic{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as an arabic numeral.
-%
-% |\roman{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as a lowercase roman numberal.
-%
-% |\Roman{|\Lcount{COUNTER}|}| prints the value of
-% \Lcount{COUNTER} as an uppercase roman numberal.
-%
-% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
-% as a lowercase letter: $1 =$~a, $2 =$~ b, etc.
-%
-% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
-% as an uppercase letter: $1 =$~A, $2 =$~B, etc.
-%
-% \begin{macrocode}
-\renewcommand\thepart {\Roman{part}}
-\renewcommand\thechapter {\arabic{chapter}}
-\renewcommand\thesection {\thechapter.\arabic{section}}
-\renewcommand\thesubsection {\thesection.\arabic{subsection}}
-\renewcommand\thesubsubsection {\thesubsection .\arabic{subsubsection}}
-\renewcommand\theparagraph {\thesubsubsection.\arabic{paragraph}}
-\renewcommand\thesubparagraph {\theparagraph.\arabic{subparagraph}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@chapapp}
-% |\@chapapp| is initially defined to be `|\chaptername|'. The
-% |\appendix| command redefines it to be `|\appendixname|'.
-%
-% \begin{macrocode}
-\newcommand\@chapapp{\chaptername}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Parts}
-%
-% \begin{macro}{\part}
-% The command to start a new part of our document.
-%
-% We start a new (righthand) page and use the \pstyle{empty}.
-% \begin{macrocode}
-\newcommand\part{\cleardoublepage
- \thispagestyle{empty}%
-% \end{macrocode}
-% When we are making a two column document, this will be a one
-% column page. We use |@tempswa| to remember to switch back to two
-% columns.
-% \begin{macrocode}
- \if@twocolumn
- \onecolumn
- \@tempswatrue
- \else
- \@tempswafalse
- \fi
-% \end{macrocode}
-% We need an empty box to prevent the fil glue from disappearing.
-% \begin{macrocode}
- \hbox{}\vfil
-% \end{macrocode}
-% Here we use |\secdef| to indicate wwhich commands to use to make
-% the actual heading.
-% \begin{macrocode}
- \secdef\@part\@spart}
-% \end{macrocode}
-%
-% \begin{macro}{\@part}
-% This macro does the actual formatting of the title of the part.
-%
-% \begin{macro}{\PartFont}
-% The font used to typeset the part is stored in this maro.
-% \begin{macrocode}
-\newcommand\PartFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% When \Lcount{secnumdepth} is larger than $-2$ for this document
-% class, we have a numbered part, otherwise it is unnumbered.
-% \begin{macrocode}
-\def\@part[#1]#2{%
- \ifnum \c@secnumdepth >-2\relax
- \refstepcounter{part}%
- \addcontentsline{toc}{part}{\thepart\hspace{1em}\toc@case{#1}}%
- \else
- \addcontentsline{toc}{part}{\toc@case{#1}}%
- \fi
-% \end{macrocode}
-% We empty the mark registers and center the title on the page.
-% Also we prevent breaking between lines and reset the font.
-% \begin{macrocode}
- \markboth{}{}
- {\centering
- \interlinepenalty \@M
- \reset@font
-% \end{macrocode}
-% When this is a numbered part we have to print the number. We have
-% to expand |\partname| before |\uppercase| is called, therefore we
-% use a temporary control sequence that, when called will execute
-% |\uppercase| on the contents of |\partname|.
-% \begin{macrocode}
- \ifnum \c@secnumdepth >-2\relax
- \Large\PartFont
- \edef\@tempa{\noexpand\uppercase{\partname}}\@tempa~\thepart
- \par
-% \end{macrocode}
-% We leave some space before we print the title and leave the
-% finishing up to |\@endpart|.
-% \begin{macrocode}
- \vskip 20\p@
- \fi
- \Large \PartFont \uppercase{#2}\par}%
- \@endpart}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@spart}
-% This macro does the actual formatting of the title of the part
-% when the star form of the user command was used. In this case we
-% {\em never} print a number. Otherwise the formatting is the same.
-%
-% \begin{macrocode}
-\def\@spart#1{%
- {\centering
- \interlinepenalty \@M
- \reset@font
- \Large \PartFont #1\par}%
- \@endpart}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@endpart}
-% This macro finishes the part page, for both |\@part| and
-% |\@spart|.
-%
-% First we fill the current page.
-% \begin{macrocode}
-\def\@endpart{\vfil\newpage
-% \end{macrocode}
-% Then, when we are in twosided mode, we produce a completely blank
-% page.
-% \begin{macrocode}
- \if@twoside
- \hbox{}%
- \thispagestyle{empty}%
- \newpage
- \fi
-% \end{macrocode}
-% When this was a two column document we have to switch back to two
-% column mode.
-% \begin{macrocode}
- \if@tempswa
- \twocolumn
- \fi}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Chapters}
-%
-% \begin{macro}{\chapter}
-% A chapter should always start on a new page therefore we start by
-% calling |\clearpage| and setting the pagestyle for this page to
-% \pstyle{plain}.
-% \begin{macrocode}
-\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi
- \thispagestyle{plain}%
-% \end{macrocode}
-% Then we prevent floats from appearing at the top of this page
-% because it looks weird to see a floating object above a chapter
-% title.
-% \begin{macrocode}
- \global\@topnum\z@
-% \end{macrocode}
-% Then we suppress the indentation of the first paragraph by
-% setting the switch |\@afterindent| to |false|. We use |\secdef|
-% to specify the macros to use for actually setting the chapter
-% title.
-% \begin{macrocode}
- \@afterindentfalse
- \secdef\@chapter\@schapter}
-% \end{macrocode}
-%
-% \begin{macro}{\@chapter}
-% This macro is called when we have a numbered chapter. When
-% \Lcount{secnumdepth} is larger than $-1$ we display the chapter
-% number. We also inform the user that a new chapter is about to be
-% typeset by writing a message to the terminal.
-% \begin{macrocode}
-\def\@chapter[#1]#2{%
- \ifnum \c@secnumdepth >\m@ne
- \refstepcounter{chapter}%
- \typeout{\@chapapp\space\thechapter.}%
- \addcontentsline{toc}{chapter}%
- {\protect\numberline{\thechapter}\toc@font0 #1}%
- \else
- \addcontentsline{toc}{chapter}{\toc@font0 #1}%
- \fi
-% \end{macrocode}
-% After having written an entry to the table of contents we store
-% the (alternative) title of this chapter with |\chaptermark| and
-% add some white space to the lists of figures and tables.
-% \begin{macrocode}
- \chaptermark{#1}%
- \addtocontents{lof}{\protect\addvspace{10\p@}}%
- \addtocontents{lot}{\protect\addvspace{10\p@}}%
-% \end{macrocode}
-% Then we call upon |\@makechapterhead| to format the actual
-% chapter title. We have to do this in a special way when we are in
-% twocolumn mode in order to have the chapter title use the entire
-% |\textwidth|. In one column mode we call |\@afterheading| which
-% takes care of suppressing the indentation.
-% \begin{macrocode}
- \if@twocolumn
- \@topnewpage[\@makechapterhead{#2}]%
- \else
- \@makechapterhead{#2}%
- \@afterheading
- \fi}
-% \end{macrocode}
-%
-% \begin{macro}{\ChapFont}
-% The font used to typeset the chapters is stored in this maro.
-% \begin{macrocode}
-\newcommand\ChapFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makechapterhead}
-% The macro above uses |\@makechapterhead|\meta{text} to format the
-% heading of the chapter.
-%
-% We begin by leaving some white space. The we open a group in
-% which we have a paragraph indent of 0pt, and in which we have the
-% text set ragged right. We also reset the font.
-% \begin{macrocode}
-\def\@makechapterhead#1{%
- \vspace*{50\p@ \@plus 5\p@}%
- {\setlength\parindent{\z@}%
- \setlength\parskip {\z@}%
- \head@style \reset@font
-% \end{macrocode}
-% Then we check whether the number of the chapter has to be printed.
-% If so we leave some whitespace between the chapternumber and its
-% title.
-% \begin{macrocode}
- \ifnum \c@secnumdepth >\m@ne
- \Large\ChapFont \@chapapp{} \thechapter
- \par
- \vskip 20\p@
- \fi
-% \end{macrocode}
-% Now we set the title in a large bold font. We prevent a pagebreak
-% at this point and leave some whitespace before the text begins.
-% \begin{macrocode}
- \Large \ChapFont #1\par
- \nobreak
- \vskip 40\p@
- }}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@schapter}
-% This macro is called when we have an unnumbered chapter. It is
-% much simpler than |\@chapter| because it only needs to typeset
-% the chapter title.
-% \begin{macrocode}
-\def\@schapter#1{\if@twocolumn
- \@topnewpage[\@makeschapterhead{#1}]%
- \else
- \@makeschapterhead{#1}%
- \@afterheading
- \fi}
-% \end{macrocode}
-%
-% \begin{macro}{\@makeschapterhead}
-% The macro above uses |\@makeschapterhead|\meta{text}to format
-% the heading of the chapter. It is similar to |\@makechapterhead|
-% except that it never has to print a chapter number.
-%
-% \begin{macrocode}
-\def\@makeschapterhead#1{%
- \vspace*{50\p@\@plus 5\p@}%
- {\setlength\parindent{\z@}%
- \setlength\parskip{\z@}%
- \head@style
- \reset@font
- \Large \ChapFont #1\par
- \nobreak
- \vskip 40\p@
- }}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \subsubsection{Lower level headings}
-%
-% These commands all make use of |\@startsection|.
-% \begin{macro}{\section}
-% This gives a normal heading with white space above the heading
-% (the whitespace below the heading will be generated by the
-% |\parskip| that is inserted at the start of the first paragraph),
-% the title set in |\large\bfseries|, and no indentation on the
-% first paragraph.
-% \begin{macrocode}
-\newcommand\section{%
- \@startsection {section}{1}{\z@}%
- {-2\baselineskip\@plus -1\baselineskip \@minus -.5\baselineskip}%
-%<+type1> {.5\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\large\SectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SectFont}
-% The font used to typeset the sections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SectFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subsection}
-% This gives a normal heading with white space above the heading,
-% the title set in |\normalsize\bfseries|, and no indentation on
-% the first paragraph.
-% \begin{macrocode}
-\newcommand\subsection{%
- \@startsection{subsection}{2}{\z@}%
- {-1\baselineskip\@plus -.5\baselineskip \@minus -.25\baselineskip}%
-%<+type1> {.25\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\normalsize\SSectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SSectFont}
-% The font used to typeset the subsections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SSectFont{\bfseries}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subsubsection}
-% This gives a normal heading with white space above the heading,
-% the title set in |\normalsize\tm|, and no indentation on the
-% first paragraph.
-% \begin{macrocode}
-\newcommand\subsubsection{%
- \@startsection{subsubsection}{3}{\z@}%
- {-1\baselineskip plus -.5\baselineskip minus -.25\baselineskip}%
-%<+type1> {.25\baselineskip}%
-%<+type3> {.01\baselineskip}%
- {\reset@font\normalsize\SSSectFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SSSectFont}
-% The font used to typeset the subsubsections is stored in this maro.
-% \begin{macrocode}
-\newcommand\SSSectFont{\rmfamily}
-\newcommand\SSSectFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\paragraph}
-% This gives a run-in heading with white space above and to the
-% right of the heading, the title set in |\normalsize\slshape|.
-% \begin{macrocode}
-\newcommand\paragraph{%
- \@startsection{paragraph}{4}{\z@}%
- {3.25ex \@plus1ex \@minus.2ex}%
- {-1em}%
- {\reset@font\normalsize\ParaFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\ParaFont}
-% The font used to typeset the paragraphs is stored in this maro.
-% \begin{macrocode}
-\newcommand\ParaFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\subparagraph}
-% This gives an indented run-in heading with white space above and
-% to the right of the heading, the title set in
-% |\normalsize\slshape|.
-% \begin{macrocode}
-\newcommand\subparagraph{%
- \@startsection{subparagraph}{5}{\parindent}%
- {3.25ex \@plus1ex \@minus .2ex}%
- {-1em}%
- {\reset@font\normalsize\SParaFont}}
-% \end{macrocode}
-%
-% \begin{macro}{\SParaFont}
-% The font used to typeset the subparagraphs is stored in this maro.
-% \begin{macrocode}
-\newcommand\SParaFont{\slshape}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\Headingfonts}
-% To change the fonts that are used to typeset the title,part,
-% chapter and section headings this macro can be used.
-% \begin{macrocode}
-\newcommand\HeadingFonts[8]{%
- \renewcommand\TitleFont{#1}%
- \renewcommand\PartFont{#2}%
- \renewcommand\ChapFont{#3}%
- \renewcommand\SectFont{#4}%
- \renewcommand\SSectFont{#5}%
- \renewcommand\SSSectFont{#6}%
- \renewcommand\ParaFont{#7}%
- \renewcommand\SParaFont{#8}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Lists}
-%
-% \subsubsection{General List Parameters}
-%
-% The following commands are used to set the default values for the list
-% environment's parameters. See the \LaTeX{} manual for an explanation
-% of the meanings of the parameters. Defaults for the list
-% environment are set as follows. First, |\rightmargin|,
-% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth
-% level list, the command |\@listK| is called, where `K' denotes `i',
-% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level
-% list.) By convention, |\@listK| should set |\leftmargin| to
-% |\leftmarginK|.
-%
-% \begin{macro}{\leftmargin}
-% \begin{macro}{\leftmargini}
-% \begin{macro}{\leftmarginii}
-% \begin{macro}{\leftmarginiii}
-% \begin{macro}{\leftmarginiv}
-% \begin{macro}{\leftmarginv}
-% \begin{macro}{\leftmarginvi}
-% For efficiency, level-one list's values are defined at top level, and
-% |\@listi| is defined to set only |\leftmargin|.
-%
-% \begin{macrocode}
-\setlength\leftmargini {\unitindent}
-\setlength\leftmarginii {\othermargin}
-\setlength\leftmarginiii{\othermargin}
-\setlength\leftmarginiv {\othermargin}
-\setlength\leftmarginv {\othermargin}
-\setlength\leftmarginvi {1em}
-% \end{macrocode}
-% Here we set the top level leftmargin.
-% \begin{macrocode}
-\setlength\leftmargin {\leftmargini}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\labelsep}
-% \begin{macro}{\labelwidth}
-% |\labelsep| is the distance between the label and the text of an
-% item; |\labelwidth| is the width of the label.
-% \begin{macrocode}
-\setlength \labelsep {5\p@}
-\setlength \labelwidth{\leftmargini}
-\addtolength\labelwidth{-\labelsep}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\partopsep}
-% When the user leaves a blank line before the environment an extra
-% vertical space of |\partopsep| is inserted, in addition to
-% |\parskip| and |\topsep|.
-% \begin{macrocode}
-\setlength\partopsep{\z@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\topsep}
-% Extra vertical space, in addition to |\parskip|, added above and
-% below list and paragraphing environments.
-% \begin{macrocode}
-\setlength\topsep{\z@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@beginparpenalty}
-% \begin{macro}{\@endparpenalty}
-% These penalties are inserted before and after a list or paragraph
-% environment. They are set to a bonus value to encourage page
-% breaking at these points.
-% \begin{macro}{\@itempenalty}
-% This penalty is inserted between list items.
-% \begin{macrocode}
-\@beginparpenalty -\@lowpenalty
-\@endparpenalty -\@lowpenalty
-\@itempenalty -\@lowpenalty
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@listI}
-% \begin{macro}{\@listi}
-% |\@listI| defines top level and |\@listi| values of
-% |\leftmargin|, |\parsep|, |\topsep|, and |\itemsep|
-%
-% \begin{macrocode}
-\def\@listI{%
- \leftmargin\unitindent
- \labelsep.5em%
- \labelwidth\leftmargin
- \advance\labelwidth-\labelsep
- \parsep \z@
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip \@plus\p@
- \itemsep 0\p@ \@plus1\p@}
-\let\@listi\@listI
-% \end{macrocode}
-% We have to initialise these parameters.
-% \begin{macrocode}
-\@listi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\@listii}
-% \begin{macro}{\@listiii}
-% \begin{macro}{\@listiv}
-% \begin{macro}{\@listv}
-% \begin{macro}{\@listvi}
-% Here are the same macros for the higher level lists.
-% \begin{macrocode}
-\def\@listii {\leftmargin\leftmarginii
- \labelsep .5em%
- \labelwidth\leftmarginii
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listiii{\leftmargin\leftmarginiii
- \labelsep .5em%
- \labelwidth\leftmarginiii
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \partopsep \z@ \@plus\p@
- \itemsep \z@ \@plus\p@}
-\def\@listiv {\leftmargin\leftmarginiv
- \labelsep .5em%
- \labelwidth\leftmarginiv%
- \advance\labelwidth-\labelsep
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listv {\leftmargin\leftmarginv
- \labelsep .5em%
- \labelwidth\leftmarginv
- \advance\labelwidth-\labelsep%
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-\def\@listvi {\leftmargin\leftmarginvi
- \labelsep .5em
- \labelwidth\leftmarginvi
- \advance\labelwidth{-\labelsep}%
-%<-type3> \topsep 0\p@ \@plus\p@
-%<+type3> \topsep -.5\parskip\@plus\p@
- \parsep \z@
- \itemsep \z@ \@plus\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Enumerate}
-%
-% The enumerate environment uses four counters: \Lcount{enumi},
-% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where
-% \Lcount{enumN} controls the numbering of the Nth level
-% enumeration.
-%
-% \begin{macro}{\theenumi}
-% \begin{macro}{\theenumii}
-% \begin{macro}{\theenumiii}
-% \begin{macro}{\theenumiv}
-% The counters are already defined in \file{latex.dtx}, but their
-% representation is changed here.
-%
-% \begin{macrocode}
-\renewcommand\theenumi{\arabic{enumi}}
-\renewcommand\theenumii{\alph{enumii}}
-\renewcommand\theenumiii{\roman{enumiii}}
-\renewcommand\theenumiv{\Alph{enumiv}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\labelenumi}
-% \begin{macro}{\labelenumii}
-% \begin{macro}{\labelenumiii}
-% \begin{macro}{\labelenumiv}
-% The label for each item is generated by the commands\\
-% |\labelenumi| ... |\labelenumiv|.
-% \begin{macrocode}
-\newcommand\labelenumi{\theenumi.}
-\newcommand\labelenumii{(\theenumii)}
-\newcommand\labelenumiii{\theenumiii.}
-\newcommand\labelenumiv{\theenumiv.}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\p@enumii}
-% \begin{macro}{\p@enumiii}
-% \begin{macro}{\p@enumiv}
-% The expansion of |\p@enumN||\theenumN| defines the output of a
-% |\ref| command when referencing an item of the Nth level of an
-% enumerated list.
-% \begin{macrocode}
-\renewcommand\p@enumii{\theenumi}
-\renewcommand\p@enumiii{\theenumi(\theenumii)}
-\renewcommand\p@enumiv{\p@enumiii\theenumiii}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \begin{environment}{enumerate}
-% We want to have different label positioning on different levels of
-% list. To acheive this we have to redefine the \Lenv{enumerate}
-% environment.
-%
-% \begin{macrocode}
-\renewenvironment{enumerate}{%
- \ifnum \@enumdepth >3
- \@toodeep
- \else
- \advance\@enumdepth \@ne
- \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
- \list{\csname label\@enumctr\endcsname}
- {\usecounter{\@enumctr}%
-%<+type1> \ifnum \@listdepth=1
- \if@revlabel
- \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}%
- \else
-%<-type3> \def\makelabel##1{\hfil##1}
-%<+type3> \def\makelabel##1{##1\hfil}
- \fi
-%<*type1>
- \else
- \def\makelabel##1{##1\hfil}%
-%</type1>
- \fi
- }%
- \fi}
-% \end{macrocode}
-% We try to suppress spaces after these list constructs.
-% \begin{macrocode}
- {\global\@ignoretrue \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Itemize}
-%
-% \begin{macro}{\labelitemi}
-% \begin{macro}{\labelitemii}
-% \begin{macro}{\labelitemiii}
-% \begin{macro}{\labelitemiv}
-% Itemization is controlled by four commands: |\labelitemi|,
-% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define
-% the labels of thevarious itemization levels: the symbols used are
-% bullet, bold en-dash, asterisk and centred dot.
-%
-% \begin{macrocode}
-\newcommand\labelitemi{$\m@th\bullet$}
-\newcommand\labelitemii{\bfseries --}
-\newcommand\labelitemiii{$\m@th\ast$}
-\newcommand\labelitemiv{$\m@th\cdot$}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{itemize}
-% We want to have differen label positioning on different levels of
-% list. To acheive this we have to redefine the \Lenv{itemize}
-% environment.
-% \begin{macrocode}
-\renewenvironment{itemize}{%
- \ifnum \@itemdepth >3
- \@toodeep
- \else
- \advance\@itemdepth \@ne
- \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
- \list{\csname\@itemitem\endcsname}%
- {%
-%<+type1> \ifnum \@listdepth=1\relax
- \if@revlabel
- \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}\else
-%<+type1> \def\makelabel##1{\hfil##1}
-%<+type3> \def\makelabel##1{##1\hfil}
- \fi
-%<*type1>
- \else
- \def\makelabel##1{##1\hfil}
- \fi
-%</type1>
- }%
- \fi}
-% \end{macrocode}
-% We try to suppress spaces after these list constructs.
-% \begin{macrocode}
- {\global\@ignoretrue \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Description}
-%
-% \begin{environment}{description}
-% The description environment is defined here -- while the itemize
-% and enumerate environments are defined in \file{latex.dtx}.
-%
-% \begin{macrocode}
-\newenvironment{description}
- {\list{}{\labelwidth\z@ \itemindent-\leftmargin
- \let\makelabel\descriptionlabel}}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\descriptionlabel}
-% To change the formatting of the label, you must redefine
-% |\descriptionlabel|.
-%
-% \begin{macrocode}
-\newcommand\descriptionlabel[1]{\hspace\labelsep \bfseries #1}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Adapting existing environments}
-%
-% Because we globally set |\topsep| to zero, we need to modify the
-% definitions of a number of environments slightly to get a litle
-% whitespace around them.
-%
-% \begin{environment}{center}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-%<*type1>
-\def\center
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \centering\item[]}
-\let\endcenter\endtrivlist
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{flushleft}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-\def\flushleft
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \raggedright\item[]}
-\let\endflushleft=\endtrivlist
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{flushright}
-% Add a litle surrounding whitespace.
-% \begin{macrocode}
-\def\flushright
- {\topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \trivlist \raggedleft\item[]}
-\let\endflushright=\endtrivlist
-%</type1>
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{environment}{verbatim}
-% In \Lenv{verbatim} we add a little surrounding whitespace,
-% --which for \file{rapport3} is negative to
-% compensate for the positive |\parskip|-- but also an indent for
-% the \file{rapport1} document class.
-% \begin{macrocode}
-\def\verbatim{%
-%<*type1>
- \topsep=.25\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip
- \@verbatim
- \leftskip\unitindent
-%</type1>
-%<*type3>
- \topsep=-.5\parskip
- \@verbatim
-%</type3>
- \frenchspacing\@vobeyspaces \@xverbatim}
-%<+type1>\def\endverbatim{\if@newlist \leavevmode\fi\endtrivlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsection{Defining new environments}
-%
-% \subsubsection{Abstract}
-%
-% \begin{environment}{abstract}
-% When we are producing a separate titlepage we also put the
-% abstract on a page of its own. It will be centred vertically on
-% the page.
-%
-% \begin{macrocode}
-\if@titlepage
- \newenvironment{abstract}{%
- \titlepage
- \null\vfil
- \hbox{\SectFont \abstractname}
- \noindent\ignorespaces}
- {\par\vfil\null\endtitlepage}
-% \end{macrocode}
-% When we are not making a seperate titlepagewe have to check if we
-% are in twocolumn mode. In that case the abstract is set as a
-% |\section*|, otherwise the abstract is typeset flushleft, an
-% amount |\unitindent| smaller as the normal text.
-% \begin{macrocode}
-\else
- \newenvironment{abstract}{%
- \if@twocolumn
- \section*{\abstractname}%
- \else
- \small
- \bgroup\rightskip=\unitindent
- \hbox{\SectFont \abstractname}%
- \noindent\ignorespaces
-% \end{macrocode}
- \fi}
-% \end{macrocode}
-% Which implies that the definition of |\end{abstract}| is also
-% different.
-% \begin{macrocode}
- {\if@twocolumn\else\par\egroup\fi}
-\fi
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Verse}
-%
-% \begin{environment}{verse}
-% The verse environment is defined by making clever use of the
-% list environment's parameters. The user types |\\| to end a line.
-% This is implemented by |\let|'ing |\\| equal |\@centercr|.
-%
-% \begin{macrocode}
-\newenvironment{verse}
- {\let\\=\@centercr
- \list{}{\itemsep\z@
- \itemindent-1.5em%
- \listparindent\itemindent
- \rightmargin\leftmargin
- \advance\leftmargin1.5em}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Quotation}
-%
-% \begin{environment}{quotation}
-% The quotation environment is also defined by making clever use of
-% the list environment's parameters. The lines in the environment
-% are set smaller than |\textwidth|. The first line of a paragraph
-% inside this environment is indented.
-%
-% \begin{macrocode}
-\newenvironment{quotation}
- {\list{}{%
- \listparindent\z@
- \itemindent\listparindent
- \rightmargin\leftmargin
- \parsep\z@ \@plus\p@}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Quote}
-%
-% \begin{environment}{quote}
-% The quote environment is like the quotation environment except
-% that paragraphs are not indented.
-%
-% \begin{macrocode}
-\newenvironment{quote}
- {\list{}{\rightmargin\leftmargin}%
- \item[]}
- {\endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Theorem}
-%
-% \begin{macro}{\@begintheorem}
-% \begin{macro}{\@opargbegintheorem}
-% \begin{macro}{\@endtheorem}
-% These document classes have a slightly modified \Lenv{theorem}
-% environment style. Surrounding whitespace is added and an
-% initialisation of |\labelsep|. Finally a slanted font instead of
-% an italic font is used.
-% \begin{macrocode}
-\def\@begintheorem#1#2{%
- \vskip\baselineskip \labelsep=.5em%
- \trivlist
- \item[\hskip \labelsep{\bfseries #1\ #2}]\slshape}
-\def\@opargbegintheorem#1#2#3{%
- \vskip\baselineskip \labelsep=.5em%
- \trivlist
- \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]\slshape}
-\def\@endtheorem{\endtrivlist \vskip\baselineskip}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Titlepage}
-%
-% \begin{environment}{titlepage}
-% In the normal environments, the titlepage environment does nothing
-% but start and end a page, and inhibit page numbers. It also resets
-% the page number to zero. In two-column style, it still makes a
-% one-column page.
-%
-% \begin{macrocode}
-\newenvironment{titlepage}
- {
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse\newpage
- \fi
- \thispagestyle{empty}%
- \if@compatibility
- \setcounter{page}{0}
- \else
- \setcounter{page}{1}%
- \fi}
- {\if@restonecol\twocolumn \else \newpage \fi
- \setcounter{page}{1}%
- }
-% \end{macrocode}
-% \end{environment}
-%
-% \subsubsection{Appendix}
-%
-% \begin{macro}{\appendix}
-%
-% The |\appendix| command is not really an environment, it is a
-% macro that makes some changes in the way things are done.
-%
-% In this document class the |\appendix| command must do the
-% following:
-% \begin{itemize}
-% \item reset the chapter and section counters to zero,
-% \item set |\@chapapp| to |\appendixname| (for messages),
-% \item redefine the chapter counter to produce appendix numbers,
-% \item possibly redefine the |\chapter| command if appendix titles
-% and headings are to look different from chapter titles and
-% headings.
-% \end{itemize}
-%
-% \begin{macrocode}
-\newcommand\appendix{\par
- \setcounter{chapter}{0}%
- \setcounter{section}{0}%
- \renewcommand\@chapapp{\appendixname}%
- \renewcommand\thechapter{\Alph{chapter}}}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Setting parameters for existing environments}
-%
-% \subsubsection{Array and tabular}
-%
-% \begin{macro}{\arraycolsep}
-% The columns in an array environment are separated by
-% 2|\arraycolsep|.
-% \begin{macrocode}
-\setlength\arraycolsep{5\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\tabcolsep}
-% The columns in an tabular environment are separated by
-% 2|\tabcolsep|.
-% \begin{macrocode}
-\setlength\tabcolsep{6\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\arrayrulewidth}
-% The width of rules in the array and tabular environments is given
-% by |\arrayrulewidth|.
-% \begin{macrocode}
-\setlength\arrayrulewidth{.4\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\doublerulesep}
-% The space between adjacent rules in the array and tabular
-% environments is given by |\doublerulesep|.
-% \begin{macrocode}
-\setlength\doublerulesep{2\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Tabbing}
-%
-% \begin{macro}{\tabbingsep}
-% This controls the space that the |\'| command puts in. (See
-% \LaTeX{} manual for an explanation.)
-% \begin{macrocode}
-\setlength\tabbingsep{\labelsep}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Minipage}
-%
-% \begin{macro}{\@minipagerestore}
-% The macro |\@minipagerestore| is called upon entry to a minipage
-% environment to set up things that are to be handled differently
-% inside a minipage environment.
-%
-% \begin{macrocode}
-%<+type1>\def\@minipagerestore{\parindent\unitindent}
-%<*type3>
-\def\@minipagerestore{%
- \parskip=.5\baselineskip \@plus .1\baselineskip
- \@minus .1\baselineskip}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@mpfootins}
-% Minipages have their own footnotes; |\skip||\@mpfootins| plays
-% same r\^ole for footnotes in a minipage as |\skip||\footins| does
-% for ordinary footnotes.
-%
-% \begin{macrocode}
-\skip\@mpfootins = \skip\footins
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{Framed boxes}
-%
-% \begin{macro}{\fboxsep}
-% The space left by |\fbox| and |\framebox| between the box and the
-% text in it.
-% \begin{macro}{\fboxrule}
-% The width of the rules in the box made by |\fbox| and |\framebox|.
-% \begin{macrocode}
-\setlength\fboxsep{3\p@}
-\setlength\fboxrule{.4\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Equation and eqnarray}
-%
-% \begin{macro}{\theequation}
-% The equation counter will be reset at beginning of a new chapter
-% and the equation number will be prefixed by the chapter number.
-%
-% This code must follow the |\chapter| definition, or more exactly
-% the definition of the chapter counter.
-% \begin{macrocode}
-\@addtoreset{equation}{chapter}
-\renewcommand\theequation{\thechapter.\arabic{equation}}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\jot}
-% |\jot| is the extra space added between lines of an eqnarray
-% environment. The default value is used.
-% \begin{macrocode}
-% \setlength\jot{3pt}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@eqnnum}
-% The macro |\@eqnnum| defines how equation numbers are to appear in
-% equations. Again the default is used.
-%
-% \begin{macrocode}
-% \def\@eqnnum{(\theequation)}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Floating objects}
-%
-% The file \file{latex.dtx} only defines a number of tools with
-% which floating objects can be defined. This is done in the
-% document class. It needs to define the following macros for each
-% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} =
-% figure).
-%
-% \begin{description}
-% \item[\texttt{\bslash fps@TYPE}]
-% The default placement specifier for floats of type
-% \texttt{TYPE}.
-%
-% \item[\texttt{\bslash ftype@TYPE}]
-% The type number for floats of type \texttt{TYPE}. Each
-% \texttt{TYPE} has associated a unique positive {\texttt
-% TYPE} number, which is a power of two. E.g., figures might
-% have type number 1, tables type number 2, programs type
-% number 4, etc.
-%
-% \item[\texttt{\bslash ext@TYPE}]
-% The file extension indicating the file on which the contents
-% list for float type \texttt{TYPE} is stored. For example,
-% |\ext@figure| = `lof'.
-%
-% \item[\texttt{\bslash fnum@TYPE}]
-% A macro to generate the figure number for a caption. For
-% example, |\fnum@TYPE| == `Figure |\thefigure|'.
-%
-% \item[\texttt{\bslash @makecaption{\meta{num}}{\meta{text}}}]
-% A macro to make a caption, with \meta{num} the value produced
-% by |\fnum@...| and \meta{text} the text of the caption. It
-% can assume it's in a |\parbox| of the appropriate width.
-% This will be used for {\em all} floating objects.
-%
-% \end{description}
-%
-% The actual environment that implements a floating object such as
-% a figure is defined using the macros |\@float| and |\end@float|,
-% which are defined in \file{latex.dtx}.
-%
-% An environment that implements a single column floating object is
-% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type
-% \texttt{TYPE} with \meta{placement} as the placement specifier.
-% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|.
-%
-% The environment is ended by |\end@float|. E.g., |\figure| ==
-% |\@float|{figure}, |\endfigure| == |\end@float|.
-%
-% \subsubsection{Figure}
-%
-% Here is the implementation of the figure environment.
-%
-% \begin{macro}{\c@figure}
-% First we have to allocate a counter to number the figures. In
-% this document class the figures are numbered per chapter.
-% \begin{macrocode}
-\newcounter{figure}[chapter]
-\renewcommand\thefigure{\thechapter.\@arabic\c@figure}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\fps@figure}
-% \begin{macro}{\ftype@figure}
-% \begin{macro}{\ext@figure}
-% \begin{macro}{\num@figure}
-% Here are the parameters for the floating objects of type `figure'.
-% \begin{macrocode}
-\def\fps@figure{tbp}
-\def\ftype@figure{1}
-\def\ext@figure{lof}
-\def\fnum@figure{\figurename~\thefigure}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{figure}
-% \begin{environment}{figure*}
-% And the definition of the actual environment. The form with the
-% |*| is used for double column figures.
-% \begin{macrocode}
-\newenvironment{figure}
- {\@float{figure}}
- {\end@float}
-\newenvironment{figure*}
- {\@dblfloat{figure}}
- {\end@dblfloat}
-% \end{macrocode}
-% \end{environment}
-% \end{environment}
-%
-% \subsubsection{Table}
-%
-% Here is the implementation of the table environment. It is very
-% much the same as the figure environment.
-%
-% \begin{macro}{\c@table}
-% First we have to allocate a counter to number the tables. In this
-% document class the tables are numbered per chapter.
-% \begin{macrocode}
-\newcounter{table}[chapter]
-\renewcommand\thetable{\thechapter.\@arabic\c@table}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\fps@table}
-% \begin{macro}{\ftype@table}
-% \begin{macro}{\ext@table}
-% \begin{macro}{\num@table}
-% Here are the parameters for the floating objects of type `table'.
-% \begin{macrocode}
-\def\fps@table{tbp}
-\def\ftype@table{2}
-\def\ext@table{lot}
-\def\fnum@table{\tablename~\thetable}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{environment}{table}
-% \begin{environment}{table*}
-% And the definition of the actual environment. The form with the
-% |*| is used for double column tables.
-% \begin{macrocode}
-\newenvironment{table}
- {\@float{table}}
- {\end@float}
-\newenvironment{table*}
- {\@dblfloat{table}}
- {\end@dblfloat}
-% \end{macrocode}
-% \end{environment}
-% \end{environment}
-%
-% \subsubsection{Captions}
-%
-% \begin{macro}{\@makecaption}
-% The |\caption| command calls |\@makecaption| to format the
-% caption of floating objects. It gets two arguments,
-% \meta{number}, the number of the floating object and \meta{text},
-% the text of the caption. Usually \meta{number} contains a string
-% such as `Figure 3.2'. The macro can assume it is called inside a
-% |\parbox| of right width, with |\normalsize|.
-%
-% \begin{macro}{\abovecaptionskip}
-% \begin{macro}{\belowcaptionskip}
-% These lengths contain the amount of white space to leave above
-% and below the caption.
-% \begin{macrocode}
-\newlength\abovecaptionskip
-\newlength\belowcaptionskip
-\setlength\abovecaptionskip{10\p@}
-\setlength\belowcaptionskip{0\p@}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% The definition of this macro is |\long| in order to allow more
-% then one paragraph in a caption.
-% \begin{macrocode}
-\long\def\@makecaption#1#2{%
- \vskip\abovecaptionskip
-% \end{macrocode}
-% We want to see if the caption fits on one line on the page,
-% therefore we first typeset it in a temporary box.
-% \begin{macrocode}
- \sbox\@tempboxa{{\CaptionLabelFont#1:} \CaptionTextFont#2}%
-% \end{macrocode}
-% We can the measure its width. It that is larger than the current
-% |\hsize| we typeset the caption as an ordinary paragraph.
-% \begin{macrocode}
- \ifdim \wd\@tempboxa >\hsize
- {\CaptionLabelFont#1:} \CaptionTextFont#2\par
-% \end{macrocode}
-% If the caption fits, we center it.
-% \begin{macrocode}
- \else
- \hbox to\hsize{\hfil\box\@tempboxa\hfil}%
- \fi
- \vskip\belowcaptionskip}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\CaptionLabelFont}
-% \begin{macro}{\CaptionTextFont}
-% These macros can contain the fonts used for typesetting captions.
-% By default they do nothing.
-% \begin{macrocode}
-\newcommand\CaptionLabelFont{\relax}
-\newcommand\CaptionTextFont{\relax}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\CaptionFonts}
-% To change the fonts that are used to typeset captions
-% this macro can be used.
-% \begin{macrocode}
-\newcommand\CaptionFonts[2]{%
- \renewcommand\CaptionLabelFont{#1}%
- \renewcommand\CaptionTextFont{#2}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Font changing}
-%
-% Here we supply the declarative font changing commands that were
-% common in \LaTeX\ version 2.09 and earlier. These commands work
-% in text mode \emph{and} in math mode. They are provided for
-% compatibility, but one should start using the |\text...| and
-% |\math...| commands instead. These commands are defined using
-% |\DeclareOldFontCommand|, a command with three arguments: the user
-% command to be defined; \LaTeX\ commands to execute in text mode
-% and \LaTeX\ commands to execute in math mode.
-%
-% \begin{macro}{\rm}
-% \begin{macro}{\tt}
-% \begin{macro}{\sf}
-%
-% The commands to change the family. When in compatibility mode we
-% select the `default' font first, to get \LaTeX2.09 behviour.
-% \begin{macrocode}
-\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
-\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
-\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\bf}
-% The command to change to the bold series. One should use
-% |\mdseries| to explicitly switch back to medium series.
-% \begin{macrocode}
-\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\sl}
-% \begin{macro}{\it}
-% \begin{macro}{\sc}
-%
-% And the commands to change the shape of the font. The slanted and
-% small caps shapes are not available by default as math alphabets,
-% so those changes do nothing in math mode. One should use
-% |\upshape| to explicitly change back to the upright shape.
-% \begin{macrocode}
-\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
-\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\relax}
-\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\relax}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\cal}
-% \begin{macro}{\mit}
-%
-% The commands |\cal| and |\mit| should only be used in math mode,
-% outside math mode they have no effect. Currently the New Font
-% Selection Scheme defines these commands to generate warning
-% messages. Therefore we have to define them `by hand'.
-% \begin{macrocode}
-\renewcommand{\cal}{\protect\pcal}
-\newcommand{\pcal}{\@fontswitch{\relax}{\mathcal}}
-\renewcommand{\mit}{\protect\pmit}
-\newcommand{\pmit}{\@fontswitch{\relax}{\mathnormal}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\pem}
-% The definition of |\pem| is changed here to have slanted instead
-% of italic fonts.
-% \begin{macrocode}
-\def\pem{\@nomath\em \ifdim \fontdimen\@ne\font >\z@
- \upshape \else \slshape \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Cross Referencing}
-% \subsection{Table of Contents, etc.}
-%
-% A |\section| command writes a
-% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command
-% on the \file{.toc} file, where \meta{title} contains the
-% contents of the entry and \meta{page} is the page number. If
-% sections are being numbered, then \meta{title} will be of the
-% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where
-% \meta{num} is the number produced by |\thesection|. Other
-% sectioning commands work similarly.
-%
-% A |\caption| command in a `figure' environment writes
-%
-% |\contentsline{figure}{\numberline{|\meta{num}|}{|%
-% \meta{caption}|}}{|\meta{page}|}|
-%
-% on the .\file{lof} file, where \meta{num} is the number produced
-% by |\thefigure| and \meta{caption} is the figure caption. It
-% works similarly for a `table' environment.
-%
-% The command |\contentsline{|\meta{name}|}| expands to
-% |\l@|\meta{name}. So, to specify the table of contents, we must
-% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to
-% specify the list of figures, we must define |\l@figure|; and so
-% on. Most of these can be defined with either the
-% |\@dottedtocline| or the |\@regtocline| command, which work as
-% follows.
-%
-% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A
-% \meta{numwidth}|}{|^^A
-% \meta{title}|}{|\meta{page}|}|
-%
-% |\@regtocline{|\meta{level}|}{|\meta{title}|}{|\meta{page}|}|
-%
-% \begin{description}
-% \item[\meta{level}] An entry is produced only if\meta{ level}
-% $<=$ value of the \Lcount{tocdepth} counter. Note,
-% |\chapter| is level 0, |\section| is level 1, etc.
-% \item[\meta{indent}] The indentation from the outer left margin
-% of the start of the contents line.
-% \item[\meta{numwidth}] The width of a box in which the section
-% number is to go, if \meta{title} includes a |\numberline|
-% command.
-% \end{description}
-%
-% \begin{macro}{\@pnumwidth}
-% \begin{macro}{\@tocrmarg}
-% \begin{macro}{\@dotsep}
-% This command uses the following three parameters, which are set
-% with a |\newcommand| (so em's can be used to make them depend upon
-% the font).
-% \begin{description}
-% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the
-% page number is put.
-% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple
-% line entries. One wants |\@tocrmarg| > or = |\@pnumwidth|
-% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu
-% units. Should be defined as a number like 2 or 1.7
-% \end{description}
-%
-% \begin{macrocode}
-\newcommand\@pnumwidth{1.55em}
-\newcommand\@tocrmarg {2.55em}
-\newcommand\@dotsep{4.5}
-\setcounter{tocdepth}{2}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{Table of Contents}
-%
-% \begin{macro}{\tableofcontents}
-% This macro is used to request that \LaTeX{} produces a table of
-% contents. The tables of contents, figures etc. are always set in
-% single-column style.
-%
-% \begin{macrocode}
-\newcommand\tableofcontents{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
-% \end{macrocode}
-% The title is set using the |\chapter*| command, making sure that
-% the running head --if one is required-- contains the right
-% information.
-% \begin{macrocode}
- \chapter*{\contentsname
- \@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}%
-% \end{macrocode}
-% The the actual table of contents is made by calling
-% |\@starttoc{toc}|. After that we restore twocolumn mode if
-% necessary.
-% \begin{macrocode}
- \@starttoc{toc}%
- \if@restonecol\twocolumn\fi
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@starttoc}
-% The internal \LaTeXe macro |\@starttoc| needs to be adapted for
-% the \file{rapport3} document classes,in order to deal with a the
-% fact that for these document classes the |\parskip| is normally
-% non-zero. We don't want that in the table of contents.
-% \begin{macrocode}
-%<*type3>
-\def\@starttoc#1{\begingroup
- \makeatletter
- \parskip\z@
- \@input{\jobname.#1}%
- \if@filesw
- \expandafter\newwrite\csname tf@#1\endcsname
- \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
- \fi \global\@nobreakfalse \endgroup}
-%</type3>
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@regtocline}
-% These document classes use a different format for the table of
-% contents than the standard classes from which they were
-% developped. In order to acheive this different format we defined
-% the macro |\@regtocline|.
-% \begin{macrocode}
-\newcommand\@regtocline[3]{%
- \ifnum #1>\c@tocdepth
- \else
- \vskip \z@ plus .2pt
- {\hangindent\z@ \@afterindenttrue \interlinepenalty\@M
- \leftskip\unitindent
- \rightskip=\unitindent plus 1fil
- \parfillskip=0cm
- \@tempdima=\unitindent
- \parindent\z@
- \leavevmode
- \hbox{}\hskip -\leftskip\relax#2\nobreak
- \hskip 1em \nobreak{\slshape #3}\par
- }%
- \fi}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\toc@font}
-% The changed definition of |\@sect| that we use, selects a
-% different font for the table of contents for the various header
-% levels. It does this using |\toc@font|.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\toc@font[1]{\relax}
-\else
- \newcommand\toc@font[1]{%
- \ifcase#1\relax
- \bfseries
- \or\slshape
- \or\rmfamily
- \fi}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\toc@case}
-% The entries for parts are typeset in capital letters in the new
-% style of the table of contents. In the old style this isn't
-% done. The macro |\toc@case| is used to switch this.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\toc@case{\relax}
-\else
- \newcommand\toc@case{\uppercase}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@part}
-% Each sectioning command needs an additional macro to format its
-% entry in the table of contents, as described above. The macro for
-% the entry for parts is defined in a special way.
-%
-% First we make sure that if a pagebreak should occur, it occurs
-% {\em before} this entry. Also a little whitespace is added and a
-% group begun to keep changes local.
-%
-% First we have the definition from the standard classes.
-% \begin{macrocode}
-\if@oldtoc
-\newcommand\l@part[2]{%
- \addpenalty{-\@highpenalty}%
- \addvspace{2.25em \@plus\p@}%
- \begingroup
-% \end{macrocode}
-% The macro |\numberline| requires that the width of the box that
-% holds the part number is stored in \LaTeX's scratch register
-% |\@tempdima|. Therefore we put it there.
-% \begin{macrocode}
- \setlength\@tempdima{3em}%
-% \end{macrocode}
-% The we set |\parindent| to 0pt and use |\rightskip| to leave
-% enough room for the pagenumbers. To prevent overfull box messages
-% the |\parfillskip| is set to a negative value.
-% \begin{macrocode}
- \parindent \z@ \rightskip \@pnumwidth
- \parfillskip -\@pnumwidth
-% \end{macrocode}
-% Now we can set the entry, in a large bold font. We make sure to
-% leave vertical mode, set the part title and add the pagenumber,
-% set flush right.
-% \begin{macrocode}
- {\leavevmode
- \large \bfseries #1\hfil \hbox to\@pnumwidth{\hss #2}}\par
-% \end{macrocode}
-% Prevent a pagebreak immediately after this entry, but use
-% |\everypar| to reset the |\if@nobreak| switch. Finally we close
-% the group.
-% \begin{macrocode}
- \nobreak
- \global\@nobreaktrue
- \everypar{\global\@nobreakfalse\everypar{}}
- \endgroup}
-% \end{macrocode}
-% Then we can introduce our new definition.
-% \begin{macrocode}
-\else
- \newcommand\l@part{\addpenalty{-\@highpenalty}
- \addvspace{2.25em \@plus \p@}\@regtocline{0}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@chapter}
-% This macro formats the entries in the table of contents for
-% chapters. It is very similar to |\l@part|
-%
-% First we make sure that if a pagebreak should occur, it occurs
-% {\em before} this entry. Also a little whitespace is added and a
-% group begun to keep changes local.
-%
-% Again we first present the `standard' definition
-% \begin{macrocode}
-\if@oldtoc
-\newcommand\l@chapter[2]{%
- \addpenalty{-\@highpenalty}%
- \vskip 1.0em \@plus\p@
-% \end{macrocode}
-%
-% The macro |\numberline| requires that the width of the box that
-% holds the part number is stored in \LaTeX's scratch register
-% |\@tempdima|. Therefore we put it there. We begin a group, and
-% change some of the paragraph parameters.
-% \begin{macrocode}
- \setlength\@tempdima{1.5em}%
- \begingroup
- \parindent \z@ \rightskip \@pnumwidth
- \parfillskip -\@pnumwidth
-% \end{macrocode}
-% Then we leave vertical mode and switch to a bold font.
-% \begin{macrocode}
- \leavevmode \bfseries
-% \end{macrocode}
-% Because we do not use |\numberline| here, we have do some fine
-% tuning `by hand', before we can set the entry. We discourage but
-% not disallow a pagebreak immediately after a chapter entry.
-% \begin{macrocode}
- \advance\leftskip\@tempdima
- \hskip -\leftskip
- #1\nobreak\hfil \nobreak\hbox to\@pnumwidth{\hss #2}\par
- \penalty\@highpenalty
- \endgroup}
-% \end{macrocode}
-% Then we present our new definition.
-% \begin{macrocode}
-\else
- \newcommand\l@chapter{\@regtocline{0}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@section}
-% In this document class the definition for
-% |\l@section| is very simple.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@section {\@dottedtocline{1}{1.5em}{2.3em}}
-\else
- \newcommand\l@section {\@regtocline{1}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@subsection}
-% \begin{macro}{\l@subsubsection}
-% \begin{macro}{\l@paragraph}
-% \begin{macro}{\l@subparagraph}
-% All lower level entries are defined using the macro
-% |\@dottedtocline| or |\@regtocline| (see above).
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@subsection {\@dottedtocline{2}{3.8em}{3.2em}}
- \newcommand\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
- \newcommand\l@paragraph {\@dottedtocline{4}{10em}{5em}}
- \newcommand\l@subparagraph {\@dottedtocline{5}{12em}{6em}}
-\else
- \newcommand\l@subsection {\@regtocline{2}}
- \newcommand\l@subsubsection{\@regtocline{3}}
- \newcommand\l@paragraph {\@regtocline{4}}
- \newcommand\l@subparagraph {\@regtocline{5}}
-\fi
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsubsection{List of figures}
-%
-% \begin{macro}{\listoffigures}
-% This macro is used to request that \LaTeX{} produces a list of
-% figures. It is very similar to |\tableofcontents|.
-%
-% \begin{macrocode}
-\newcommand\listoffigures{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
- \chapter*{\listfigurename
- \@mkboth{\uppercase{\listfigurename}}%
- {\uppercase{\listfigurename}}}%
- \@starttoc{lof}%
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@figure}
-% This macro produces an entry in the list of figures.
-% \begin{macrocode}
-\if@oldtoc
- \newcommand\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
-\else
- \newcommand\l@figure{\@regtocline{1}}
-\fi
-% \end{macrocode}
-% \end{macro}
-%
-% \subsubsection{List of tables}
-%
-% \begin{macro}{\listoftables}
-% This macro is used to request that \LaTeX{} produces a list of
-% tables. It is very similar to |\tableofcontents|.
-%
-% \begin{macrocode}
-\newcommand\listoftables{%
- \if@twocolumn
- \@restonecoltrue\onecolumn
- \else
- \@restonecolfalse
- \fi
- \chapter*{\listtablename
- \@mkboth{\uppercase{\listtablename}}{\uppercase{\listtablename}}}%
- \@starttoc{lot}%
- \if@restonecol\twocolumn\fi
- }
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\l@table}
-% This macro produces an entry in the list of tables.
-% \begin{macrocode}
-\let\l@table\l@figure
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Bibliography}
-%
-% \begin{macro}{\bibindent}
-% The ``open'' bibliography format uses an indentation of
-% |\bibindent|.
-% \begin{macrocode}
-\newdimen\bibindent
-\bibindent=1.5em
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\newblock}
-% This is a dummy definition for this macro which is used in the
-% \textsf{thebibliography} environment.
-% \begin{macrocode}
-\newcommand\newblock{}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{environment}{thebibliography}
-% The `thebibliography' environment executes the following
-% commands:
-%
-% |\renewcommand\newblock{\hskip .11em \@plus .33em \@minus .07em}|
-% -- Defines the ``closed'' format, where the blocks (major units
-% of information) of an entry run together.
-%
-% |\sloppy| -- Used because it's rather hard to do line breaks in
-% bibliographies,
-%
-% |\sfcode`\.=1000\relax| --
-% Causes a `.' (period) not to produce an end-of-sentence space.
-%
-% The implementation of this environment is based on the generic
-% list environment. It uses the \Lcount{enumiv} counter internally
-% to generate the labels of the list.
-%
-% When an empty `thebibliography' environment is found, a warning
-% is issued.
-%
-% \begin{macrocode}
-\newenvironment{thebibliography}[1]
- {\chapter*{\bibname
- \@mkboth{\uppercase{\bibname}}%
- {\uppercase{\bibname}}}%
- \list{\@biblabel{\arabic{enumiv}}}%
- {\settowidth\labelwidth{\@biblabel{#1}}%
- \leftmargin\labelwidth
- \advance\leftmargin\labelsep
- \if@openbib
- \advance\leftmargin\bibindent
- \itemindent -\bibindent
- \listparindent \itemindent
- \parsep \z@
- \fi
- \usecounter{enumiv}%
- \let\p@enumiv\@empty
- \renewcommand\theenumiv{\arabic{enumiv}}}%
- \if@openbib
- \renewcommand\newblock{\par}
- \else
- \renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}%
- \fi
- \sloppy\clubpenalty4000\widowpenalty4000%
- \sfcode`\.=\@m}
- {\def\@noitemerr{\@warning{Empty `thebibliography' environment}}%
- \endlist}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\@biblabel}
-% The label for a |\bibitem[...]| command is produced by this
-% macro. The default from \file{latex.dtx} is used.
-% \begin{macrocode}
-% \renewcommand\@biblabel[1]{[#1]\hfill}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@cite}
-% The output of the |\cite| command is produced by this macro. The
-% default from \file{latex.dtx} is used.
-% \begin{macrocode}
-% \renewcommand\@cite[1]{[#1]}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{The index}
-%
-% \begin{environment}{theindex}
-% The environment `theindex' can be used for indices. It makes an
-% index with two columns, with each entry a seperate paragraph. At
-% the user level the commands |\item|, |\subitem| and |\subsubitem|
-% are used to produce index entries of various levels. When a new
-% letter of the alphabet is encountered an amount of |\indexspace|
-% white space can be added.
-%
-% \begin{macrocode}
-\newenvironment{theindex}
- {\if@twocolumn
- \@restonecolfalse
- \else
- \@restonecoltrue
- \fi
- \columnseprule \z@
- \columnsep 35\p@
- \twocolumn[\@makeschapterhead{\indexname}]%
- \@mkboth{\uppercase{\indexname}}%
- {\uppercase{\indexname}}%
- \thispagestyle{plain}\parindent\z@
- \parskip\z@ \@plus .3\p@\relax
- \let\item\@idxitem}
-% \end{macrocode}
-% When the document continues after the index and it was a one
-% column document we have to switch back to one column after the
-% index.
-% \begin{macrocode}
- {\if@restonecol\onecolumn\else\clearpage\fi}
-% \end{macrocode}
-% \end{environment}
-%
-% \begin{macro}{\@idxitem}
-% \begin{macro}{\subitem}
-% \begin{macro}{\subsubitem}
-% Thsee macros are used to format the entries in the index. ^^AA ???
-% \begin{macrocode}
-\newcommand\@idxitem {\par\hangindent 40\p@}
-\newcommand\subitem {\par\hangindent 40\p@ \hspace*{20\p@}}
-\newcommand\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\indexspace}
-% The amount of white space that is inserted between `letter
-% blocks' in the index.
-% \begin{macrocode}
-\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Footnotes}
-%
-% \begin{macro}{\footnoterule}
-% Usually, footnotes are separated from the main body of the text
-% by a small rule. This rule is drawn by the macro |\footnoterule|.
-% We have to make sure that the rule takes no vertical space (see
-% \file{plain.tex}) so we compensate for the natural heigth of the
-% rule of 0.4pt by adding the right amount of vertical skip.
-%
-% To prevent the rule from colliding with the footnote we first add
-% a little negative vertical skip, then we put the rule and add
-% some positive vertical skip.
-% \begin{macrocode}
-\renewcommand\footnoterule{%
- \kern-3\p@
- \kern.5\baselineskip
- \hrule\@width\unitindent
- \kern.4\baselineskip
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\c@footnote}
-% Footnotes are numbered within chapters.
-% \begin{macrocode}
-% \newcounter{footnote}
-\@addtoreset{footnote}{chapter}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makefntext}
-% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext|
-% to produce the actual footnote. The macro gets the text of the
-% footnote as its argument and should use |\@thefnmark| as the mark
-% of the footnote. The macro |\@makefntext|is called when
-% effectively inside a |\parbox| of width |\columnwidth| (i.e.,
-% with |\hsize| = |\columnwidth|).
-%
-% An example of what can be achieved is given by the following piece
-% of \TeX\ code.
-% \begin{verbatim}
-% \long\def\@xmakefntext#1#2{%
-% %<-type3> \parindent=.5\unitindent
-% %<+type3> \parindent=\z@\parskip=.5\baselineskip
-% \def\labelitemi{--}\@revlabeltrue
-% {\setbox0=\hbox {#1\hskip.5em plus 1fil}%
-% \dimen0=2\wd0
-% \ifdim\dimen0>\unitindent
-% \global\unitindent=\dimen0
-% \@indentset
-% \fi}%
-% \@setpar{\@@par
-% \@tempdima \hsize
-% \advance\@tempdima-.5\unitindent
-% \parshape \@ne .5\unitindent \@tempdima}%
-% \par
-% \noindent\llap{\hbox to .5\unitindent{#1\hfil}}#2}
-% \end{verbatim}
-% The effect of this definition is that all lines of the footnote
-% are indented by 10pt, while the first line of a new paragraph is
-% indented by 1em. To change these dimensions, just substitute the
-% desired value for `10pt' (in both places) or `1em'. The mark is
-% flushright against the footnote.
-%
-% In these document classes we use a simpler macro, in which the
-% footnote text is set like an ordinary text paragraph, with no
-% indentation except on the first line of the footnote. Thus, all
-% the macro must do is set |\parindent| to the appropriate value
-% for succeeding paragraphs and put the proper indentation before
-% the mark. We change the label of itemized lists inside footnotes
-% and need to check that the |\unitindent| is large enough for our
-% purposes.
-%
-% For most of the document classes produced from this file we need
-% a slightly modified |\@makefntext| on the title page, so we
-% introduce an extra macro, |\@xmakefntext|.
-% \begin{macrocode}
-\def\@makefntext{\@xmakefntext{$\m@th\@thefnmark$.}}
-\long\def\@xmakefntext#1{%
- \parindent\z@
- \def\labelitemi{--}\@revlabeltrue
- {\setbox0=\hbox {#1\hskip.5em plus 1fil}
- \dimen0=2\wd0\relax
- \ifdim\dimen0>\unitindent
- \global\unitindent=\dimen0\relax
- \@indentset
- \fi}
- \leavevmode\hbox to .5\unitindent{#1\hfil}}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\@makefnmark}
-% The footnote markers that are printed in the text to point to the
-% footnotes should be produced by the macro |\@makefnmark|. We use
-% the default definition for it.
-% \begin{macrocode}
-%\def\@makefnmark{\hbox{$^{\@thefnmark}\m@th$}}
-% \end{macrocode}
-% \end{macro}
-%
-% \section{Initialization}
-%
-% \subsection{Words}
-%
-% \begin{macro}{\contentsname}
-% \begin{macro}{\listfigurename}
-% \begin{macro}{\listtablename}
-% \begin{macro}{\refname}
-% \begin{macro}{\bibname}
-% \begin{macro}{\indexname}
-% \begin{macro}{\figurename}
-% \begin{macro}{\tablename}
-% \begin{macro}{\partname}
-% \begin{macro}{\chaptername}
-% \begin{macro}{\appendixname}
-% \begin{macro}{\abstractname}
-% \begin{macro}{\seename}
-% \begin{macro}{\andname}
-% This document class is for documents prepared in the English language.
-% To prepare a version for another language, various English words must
-% be replaced. All the English words that require replacement are
-% defined below in command names.
-%
-% \begin{macrocode}
-\newcommand\contentsname{Contents}
-\newcommand\listfigurename{List of Figures}
-\newcommand\listtablename{List of Tables}
-\newcommand\bibname{Bibliography}
-\newcommand\indexname{Index}
-\newcommand\figurename{Figure}
-\newcommand\tablename{Table}
-\newcommand\partname{Part}
-\newcommand\chaptername{Chapter}
-\newcommand\appendixname{Appendix}
-\newcommand\abstractname{Abstract}
-\newcommand\seename{see}
-\newcommand\andname{and}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \subsection{Date}
-%
-% \begin{macro}{\today}
-% This macro uses the \TeX\ primitives |\month|, |\day| and |\year|
-% to provide the date of the \LaTeX-run.
-% \begin{macrocode}
-\newcommand\today{\ifcase\month\or
- January\or February\or March\or April\or May\or June\or
- July\or August\or September\or October\or November\or December\fi
- \space\number\day, \number\year}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{Two column mode}
-%
-% \begin{macro}{\columnsep}
-% This gives the distance between two columns in two column mode.
-% \begin{macrocode}
-\setlength\columnsep{10\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\columnseprule}
-% This gives the width of the rule between two columns in two
-% column mode. We have no visible rule.
-% \begin{macrocode}
-\setlength\columnseprule{0\p@}
-% \end{macrocode}
-% \end{macro}
-%
-% \subsection{The page style}
-%
-% We have \pstyle{plain} pages unless the user specified
-% otherwise. We use arabic pagenumbers.
-% \begin{macrocode}
-\pagestyle{plain}
-\pagenumbering{arabic} % Arabic page numbers
-% \end{macrocode}
-%
-% When the \Lopt{twocolumn} option was specified we call
-% |\twocolumn| to activate this mode. We try to make each column as
-% long as the others, but call |sloppy| to make our life easier.
-% \begin{macrocode}
-\if@twocolumn
- \twocolumn
- \sloppy
- \flushbottom
-% \end{macrocode}
-% Normally we call |\onecolumn| to initiate typesetting in one
-% column.
-% \begin{macrocode}
-\else
- \onecolumn
-\fi
-% \end{macrocode}
-%
-% \begin{macro}{\frenchspacing}
-% Controls the amount of space after a punctuation mark.
-% \begin{macrocode}
-\frenchspacing
-%</class>
-% \end{macrocode}
-% \end{macro}
-%
-% \Finale
-%
-\endinput
-%