trunk/Master/texmf-dist/source/latex/tocloft

git-svn-id: svn://tug.org/texlive/trunk@555 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 3757 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/tocloft/tocloft.dtx b/Master/texmf-dist/source/latex/tocloft/tocloft.dtx
new file mode 100644
index 00000000000..624fbfcab75
--- /dev/null
+++ b/Master/texmf-dist/source/latex/tocloft/tocloft.dtx
@@ -0,0 +1,3681 @@
+% \iffalse meta-comment
+%
+% tocloft.dtx
+% Author: Peter Wilson (CUA) now at peter.r.wilson@boeing.com
+%                            (or pandgwilson@earthlink.net) 
+% Copyright 1998-2003 Peter R. Wilson
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.3 of this license or (at your option) any 
+% later version.
+% The latest version of the license is in
+%    http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of
+% LaTeX version 2003/06/01 or later.
+%
+% This work has the LPPL maintenance status "author-maintained".
+%
+% This work consists of the files listed in the README file.
+%
+% 
+%<*driver>
+\documentclass{ltxdoc}
+\EnableCrossrefs
+\CodelineIndex
+\setcounter{StandardModuleDepth}{1}
+\begin{document}
+  \DocInput{tocloft.dtx}
+\end{document}
+%</driver>
+%
+% \fi
+%
+% \CheckSum{2208}
+%
+% \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
+% \DoNotIndex{\@centercr,\@cite}
+% \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
+% \DoNotIndex{\@input,\@ixpt,\@m}
+% \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
+% \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
+% \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
+% \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
+% \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
+% \DoNotIndex{\advance,\Alph,\alph}
+% \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
+% \DoNotIndex{\bullet}
+% \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
+% \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
+% \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
+% \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
+% \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
+% \DoNotIndex{\fbox}
+% \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
+% \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
+% \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
+% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
+% \DoNotIndex{\input}
+% \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
+% \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
+% \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
+% \DoNotIndex{\NeedsTeXFormat,\newdimen}
+% \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
+% \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
+% \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
+% \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
+% \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
+% \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
+% \DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
+% \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
+% \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
+% \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
+% \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
+% \DoNotIndex{\viipt,\vipt,\vskip,\vspace}
+% \DoNotIndex{\wd,\xiipt,\year,\z@}
+%
+% \changes{v0.1}{1998/12/31}{First public (alpha) release}
+% \changes{v0.1a}{1999/01/15}{Improved documentation}
+% \changes{v0.2}{1999/01/17}{Uses the stdclsdv package}
+% \changes{v0.2a}{1999/01/17}{Interfaced with the tocbibind package}
+% \changes{v0.2b}{1999/03/07}{Corrected failure when used with float package}
+% \changes{v0.2c}{1999/06/30}{Added raggedright example}
+% \changes{v0.3}{1999/08/22}{Added option to prevent ToC head change}
+% \changes{v1.0}{1999/09/19}{Added PackageNote reporting}
+% \changes{v1.1}{2000/02/11}{Added cftXpresnum commands}
+% \changes{v1.1}{2000/02/11}{Added support for subfigure package}
+% \changes{v1.1a}{2000/02/11}{Changed X to Z in section 2.2}
+% \changes{v2.0}{2001/03/03}{Added command for new list of...}
+% \changes{v2.0}{2001/03/03}{Removed requirement for stdclsdv package}
+% \changes{v2.0}{2001/03/15}{Removed requirement for hyperref option}
+% \changes{v2.1}{2001/04/08}{Added control over parskip in ToC etc.}
+% \changes{v2.2}{2001/04/17}{Another fix for hyperref}
+% \changes{v2.3}{2002/06/15}{Made to work with the koma classes}
+% \changes{v2.3a}{2002/10/03}{Partial fix for Part changes}
+% \changes{v2.3b}{2003/01/20}{More fixes for Part changes}
+% \changes{v2.3c}{2003/09/26}{More fixes for hyperref}
+%
+% \def\dtxfile{\texttt{tocloft.dtx}}
+% \def\fileversion{v1.1a}  \def\filedate{2000/02/11}
+% \def\fileversion{v2.0} \def\filedate{2001/03/15}
+% \def\fileversion{v2.1} \def\filedate{2001/04/08}
+% \def\fileversion{v2.2} \def\filedate{2001/04/17}
+% \def\fileversion{v2.3} \def\filedate{2002/06/15}
+% \def\fileversion{v2.3a} \def\filedate{2002/10/03}
+% \def\fileversion{v2.3b} \def\filedate{2003/01/20}
+% \def\fileversion{v2.3c} \def\filedate{2003/09/26}
+% \newcommand*{\Lpack}[1]{\textsf {#1}}           ^^A typeset a package
+% \newcommand*{\Lopt}[1]{\textsf {#1}}            ^^A typeset an option
+% \newcommand*{\file}[1]{\texttt {#1}}            ^^A typeset a file
+% \newcommand*{\Lcount}[1]{\textsl {\small#1}}    ^^A typeset a counter
+% \newcommand*{\pstyle}[1]{\textsl {#1}}          ^^A typeset a pagestyle
+% \newcommand*{\Lenv}[1]{\texttt {#1}}            ^^A typeset an environment
+% \providecommand{\bs}{\textbackslash}
+%
+% \title{The \Lpack{tocloft} package\thanks{This
+%        file (\dtxfile) has version number \fileversion, last revised
+%        \filedate.}}
+%
+% \author{%
+% Peter Wilson\thanks{After May 2004 at: \texttt{pandgwilson at earthlink dot net}}\\
+% Catholic University of America \\
+% Now at \texttt{peter.r.wilson@boeing.com}
+% }
+% \date{\filedate}
+% \maketitle
+% \begin{abstract}
+%    The \Lpack{tocloft} package provides means of controlling the 
+% typographic design of the Table of Contents, List of Figures and List of
+% Tables. New kinds of `List of \ldots' can be defined.
+%
+% The package has been tested with the 
+% \Lpack{tocbibind}, 
+% \Lpack{minitoc}, 
+% \Lpack{ccaption},
+% \Lpack{subfigure}, 
+% \Lpack{float},
+% \Lpack{fncychap}, and
+% \Lpack{hyperref} 
+% packages.
+% \end{abstract}
+% \tableofcontents
+% \makeatletter \renewcommand{\@dotsep}{9.0} \makeatother
+% \listoffigures
+% \listoftables
+% \StopEventually{}
+%
+% 
+%
+% \section{Introduction}
+%
+% In the standard classes the typographic design of the Table of Contents
+% (ToC), the List of Figures (LoF) and List of Tables (LoT) is fixed or,
+% more precisely, it is buried within the class definitions.
+% The \Lpack{tocloft} package provides handles for an author to
+% change the design to meet the needs of the particular document.
+% 
+% Elements of the package were developed as part of a class
+% and package bundle for typesetting ISO standards~\cite{PRW96i}.
+% This manual is typeset according to the conventions of the
+% \LaTeX{} \textsc{docstrip} utility which enables the automatic
+% extraction of the \LaTeX{} macro source files~\cite{GOOSSENS94}.
+%
+%    Section~\ref{sec:usc} describes the usage of the package.
+% Commented source code for the package is in Section~\ref{sec:code}.
+%
+% The package has been tested in combination with at least 
+% the \Lpack{tocbibind} package~\cite{TOCBIBIND}, 
+% the \Lpack{minitoc} package~\cite{MINITOC}, 
+% the \Lpack{ccaption} package~\cite{CCAPTION},
+% the \Lpack{subfigure} package~\cite{SUBFIGURE} (versions 2.0 and 2.1),
+% the \Lpack{algorithm} package~\cite{ALGORITHM} (which, in turn, calls the
+% \Lpack{float} package~\cite{FLOAT}) and the \Lpack{fncychap} package~\cite{FNCYCHAP}.
+% It also works with the \Lpack{hyperref} package.
+% Please send me any comments as to how you think
+% that the package can be improved, or of any interesting examples of 
+% how you have used 
+% it.\footnote{Thanks to Rowland (\texttt{rebecca@astrid.u-net.com}),
+%   John Foster (\texttt{john@isjf.demon.co.uk}),
+%   Kasper (\texttt{kbg@dkik.dk}),
+%   Lee Nave (\texttt{nave@math.washington.edu}),
+%   and Andrew Thurber (\texttt{athurber@emba.uvm.edu})
+%   for their suggestions.}
+%
+% \subsection{\LaTeX 's methods}
+%
+%    This is a general description of how \LaTeX{} does the processing
+% for a Table of Contents. As the processing for List of Figures and
+% List of Tables is similar I will, without loss of generality, just
+% discuss the ToC.
+%
+% \DescribeMacro{\addcontentsline}
+%    \LaTeX{} generates a \file{.toc} file if the document contains a
+% |\tableofcontents| command. The sectioning 
+% commands\footnote{For figures and tables it is the \texttt{\bs caption} command
+% that populates the \file{.lof} and \file{.lot} files.}
+% put entries into the \file{.toc} file by calling the \LaTeX{}
+% |\addcontentsline{|\meta{file}|}{|\meta{kind}|}{|\meta{title}|}|
+% command, where \meta{file} is the file extension (e.g., |toc|),
+% \meta{kind} is the kind of entry (e.g., |section| or |subsection|),
+% and \meta{title} is the (numberered) title text. In the cases where
+% there is a number, the \meta{title} argument is given in the
+% form |{\numberline{number} title-text}|.
+%
+% NOTE: The \Lpack{hyperref} package dislikes authors using 
+% |\addcontentsline|. To get it to work properly with \Lpack{hyperref}
+% you normally have to put |\phantomsection| (a macro defined within
+% the \Lpack{hyperref} package) immediately 
+% before |\addcontentsline|.
+%
+% \DescribeMacro{\contentsline}
+%     The |\addcontentsline| command writes an entry to the given file
+% in the form |\contentsline{|\meta{kind}|}{|\meta{title}|}{|\meta{page}|}|
+% where \meta{page} is the page number.
+%     For each \meta{kind}, \LaTeX{} provides a command 
+% |\l@kind{|\meta{title}|}{|\meta{page}|}| which performs the actual
+% typesetting of the |\contentsline| entry. 
+%
+% \newcommand{\maxx}{120}       ^^A picture width
+% \newcommand{\maxxm}{118}      ^^A \maxx - 2\
+% \newcommand{\maxy}{55}        ^^A picture height
+% \newcommand{\maxym}{53}       ^^A \maxy - 2
+% \newcommand{\findent}{20}     ^^A indent
+% \newcommand{\findentp}{22}    ^^A \findent + 2
+% \newcommand{\fnumwidth}{10}   ^^A numwidth
+% \newcommand{\ftocrmarg}{30}   ^^A \@tocrmarg
+% \newcommand{\fpnumwidth}{20}  ^^A \@pnumwidth
+% \newcommand{\fipn}{30}        ^^A \findent + \fnumwidth
+% \newcommand{\frmarg}{90}      ^^A \maxx - \ftocrmarg
+% \newcommand{\frnum}{100}      ^^A \maxx - \fpnumwidth
+% \newcommand{\fyi}{10}         ^^A 1st y height
+% \newcommand{\fyim}{8}         ^^A \fyi - 2
+% \newcommand{\fyii}{20}        ^^A 2nd y height
+% \newcommand{\fyiii}{25}       ^^A 3rd y height
+% \newcommand{\fyiv}{30}        ^^A 4th y height
+% \newcommand{\fyv}{40}         ^^A 5th y height
+% \newcommand{\fyvp}{42}        ^^A \fyv + 2
+% \newcommand{\flin}{4}         ^^A length of leader lines
+% \newcommand{\frmargm}{89}     ^^A \frmarg (90) - a little bit
+% 
+% \providecommand{\bs}{\textbackslash}
+% \begin{figure}
+% \centering
+% \setlength{\unitlength}{1mm}
+% \begin{picture}(\maxx,\maxy)
+%     ^^A side lines and linewidth
+%   \put(0,0){\line(0,1){\maxy}}
+%   \put(\maxx,0){\line(0,1){\maxy}}
+%   \put(0,\maxy){\vector(1,0){\maxx}}
+%   \put(2,\maxym){\makebox(0,0)[tl]{\texttt{\bs linewidth}}}
+%     ^^A \@pnumwidth
+%   \put(\maxx,\fyi){\vector(-1,0){\fpnumwidth}}
+%   \put(\maxxm,\fyim){\makebox(0,0)[tr]{\texttt{\bs @pnumwidth}}}
+%   \put(\frnum,\fyi){\line(0,1){\flin}}
+%     ^^A \@tocrmarg
+%   \put(\maxx,\fyv){\vector(-1,0){\ftocrmarg}}
+%   \put(\maxxm,\fyvp){\makebox(0,0)[br]{\texttt{\bs @tocrmarg}}}
+%   \put(\frmarg,\fyv){\line(0,-1){\flin}}
+%     ^^A indent
+%   \put(0,\fyv){\vector(1,0){\findent}}
+%   \put(2,\fyvp){\makebox(0,0)[bl]{\textit{indent}}}
+%   \put(\findent,\fyv){\line(0,-1){\flin}}
+%     ^^A numwidth
+%   \put(\findent,\fyv){\vector(1,0){\fnumwidth}}
+%   \put(\findentp,\fyvp){\makebox(0,0)[bl]{\textit{numwidth}}}
+%   \put(\fipn,\fyv){\line(0,-1){\flin}}
+%     ^^A last title line
+%   \put(\maxx,\fyii){\makebox(0,0)[br]{487}}
+%   \put(\fipn,\fyii){title end}
+%     ^^A second title line
+%   \put(\fipn,\fyiii){continue\ldots}
+%   \put(\frmarg,\fyiii){\makebox(0,0)[br]{\ldots title}}
+%     ^^A first title line
+%   \put(\findent,\fyiv){\textbf{3.5}}
+%   \put(\fipn,\fyiv){Heading\ldots}
+%   \put(\frmarg,\fyiv){\makebox(0,0)[br]{\ldots title}}
+%     ^^A dotted leader
+%   \multiput(\frmargm,\fyii)(-\flin,0){12}{.}
+%   \multiput(\frmarg,\fyi)(-\flin,0){2}{\line(0,1){\flin}}
+%   \put(\frmarg,\fyi){\vector(-1,0){\flin}}
+%   \put(\frmarg,\fyi){\vector(1,0){0}}
+%   \put(\frmarg,\fyim){\makebox(0,0)[tr]{\texttt{\bs @dotsep}}}
+% 
+% \end{picture}
+% \setlength{\unitlength}{1pt}
+% \caption{Layout of a ToC (LoF, LoT) entry} \label{fig:ltoc}
+% \end{figure}
+% 
+% 
+% \DescribeMacro{\@pnumwidth}
+% \DescribeMacro{\@tocrmarg}
+% \DescribeMacro{\@dotsep}
+% The general layout of a
+% typeset entry is illustrated in Figure~\ref{fig:ltoc}. There are three
+% internal \LaTeX{} commands that are used in the typesetting. The page
+% number is typeset flushright in a box of width |\@pnumwidth|, and the box
+% is at the righthand margin. If the page number is too long to fit into
+% the box it will stick out into the righthand margin. The title text
+% is indented from the righthand margin by an amount given by |\@tocrmarg|.
+% Note that |\@tocrmarg| should be greater than |\@pnumwidth|. Some
+% entries are typeset with a dotted leader between the end of the title
+% title text and the righthand margin indentation. The distance, in
+% \emph{math units}\footnote{There are 18mu to 1em.} between the dots
+% in the leader is given by the value of |\@dotsep|. In the standard
+% classes the same values are used for the ToC, LoF and the LoT.
+%
+%    The standard values for these internal commands are:
+% \begin{itemize}
+% \item |\@pnumwidth| = 1.55em
+% \item |\@tocrmarg| = 2.55em 
+% \item |\@dotsep| = 4.5
+% \end{itemize}
+% The values can be changed by using |\renewcommand|, in spite of the
+% fact that the first two appear to be lengths.
+%
+%    Dotted leaders are not available for Part and Chapter ToC entries
+% (nor for Section entries in the \Lpack{article} class and its derivatives).
+%
+% \DescribeMacro{\numberline}
+%    Each |\l@kind| macro is responsible for setting the general 
+% \textit{indent} from the lefthand margin, and the \textit{numwidth}.
+% The |\numberline{|\meta{number}|}| macro is responsible for typesetting
+% the number flushleft in a box of width 
+% \textit{numwidth}. If the number is too long for the box then it will
+% protrude into the title text. The title text is indented by
+% (\textit{indent + numwidth}) from the lefthand margin. That is, the title
+% text is typeset in a block of width \\
+% (|\linewidth| - \textit{indent} - \textit{numwidth} - |\@tocrmarg|). 
+%
+% \begin{table}
+% \centering
+% \caption[Indents and Numwidths]{Indents and Numwidths (in ems)} \label{tab:indents}
+% \begin{tabular}{lcrrrr} \hline
+% Entry & Level & \multicolumn{2}{c}{Chaptered} & \multicolumn{2}{c}{Otherwise} \\
+%       &       & indent & numwidth & indent & numwidth \\ \hline
+% part          & -1 & 0    & --- & 0    & --- \\
+% chapter       & 0  & 0    & 1.5 &      &     \\
+% section       & 1  & 1.5  & 2.3 & 0    & 1.5 \\
+% subsection    & 2  & 3.8  & 3.2 & 1.5  & 2.3 \\
+% subsubsection & 3  & 7.0  & 4.1 & 3.8  & 3.2 \\
+% paragraph     & 4  & 10.0 & 5.0 & 7.0  & 4.1 \\
+% subparagraph  & 5  & 12.0 & 6.0 & 10.0 & 5.0 \\
+% figure/table  & (1) & 1.5 & 2.3 & 1.5  & 2.3 \\ \hline
+% \end{tabular}
+% \end{table}
+%
+% Table~\ref{tab:indents} lists the standard values for the \textit{indent}
+% and \textit{numwidth}. There is no explicit \textit{numwidth} for a
+% part; instead a gap of 1em is put between the number and the title text.
+% Note that for a sectioning command the values
+% depend on whether or not the document class provides the |\chapter|
+% command. Also, which somewhat surprises me, the table and figure entries
+% are all indented.
+%
+% \DescribeMacro{\@dottedtocline}
+%    Most of the |\l@kind| commands are defined in terms of the
+% |\@dottedtocline| command. This command takes three arguments: \\
+% |\@dottedtocline{|\meta{seclevel}|}{|\meta{indent}|}{|\meta{numwidth}|}|. \\
+% For example, one definition of the |\l@section| command is: \\
+% |\newcommand*{\l@section}{\@dottedtocline{1}{1.5em}{2.3em}}| \\
+% If it is necessary to change the default typesetting of the entries,
+% then it is usually necessary to change these definitions (but the
+% \Lpack{tocloft} package gives you handles to easily alter things without
+% having to know the \LaTeX{} internals).
+%
+%    You can use the |\addcontentsline| command to add |\contentsline|
+% commands to a file. 
+%
+% \DescribeMacro{\addtocontents}
+%    \LaTeX{} also provides the |\addtocontents{|\meta{file}|}{|\meta{text}|}|
+% command that will insert \meta{text} into \meta{file}. You can use
+% this for adding extra text and/or macros into the file, for processing
+% when the file is typeset by |\tableofcontents| (or whatever other
+% command is used for \meta{file} processing, such as |\listoftables|
+% for a \file{.lot} file).
+%
+% As |\addcontentsline| and |\addtocontents| write their arguments to a
+% file, any fragile commands used in their arguments must be |\protect|ed.
+% 
+%    You can make certain adjustments to the ToC etc., layout without
+% using any package. Some examples are:
+% \begin{itemize}
+% \item If your page numbers stick out into the righthand margin
+%  \begin{verbatim}
+%  \renewcommand{\@pnumwidth}{3em} \renewcommand{\@tocrmarg}{4em}
+%  \end{verbatim}
+% but using lengths appropriate to your document.
+%
+% \item To have the (sectional) titles in the ToC, etc., typeset ragged right with no
+% hyphenation
+% \begin{verbatim}
+% \renewcommand{\@tocrmarg}{2.55em plus1fil}
+% \end{verbatim}
+% where the value |2.55em| can be changed for whatever margin space you want.
+%
+% \item The dots in the leaders can be eliminated by increasing |\@dotsep|
+% to a large value:
+%  \begin{verbatim}
+%  \renewcommand{\@dotsep}{10000}
+%  \end{verbatim}
+%
+% \item To have dotted leaders in your ToC and LoF but not in your LoT:
+% \begin{verbatim}
+% ...
+% \tableofcontents
+% \makeatletter \renewcommand{\@dotsep}{10000} \makeatother
+% \listoftables
+% \makeatletter \renewcommand{\@dotsep}{4.5} \makeatother
+% \listoffigures
+% ...
+% \end{verbatim}
+% For this document I used this method to double the dot spacing for
+% the LoF with respect to that for the ToC. As you can see, it is much
+% better that all dot leaders have the same spacing.
+%
+% \item To add a horizontal line across the whole width of the ToC below 
+% an entry for a Part:
+% \begin{verbatim}
+% \part{Part title}
+% \addtocontents{toc}{\protect\mbox{}\protect\hrulefill\par}
+% \end{verbatim}
+% Note that as both |\addtocontents| and |\addcontentsline| write their
+% arguments to a file, it means that any \emph{fragile} commands in
+% their arguments must be protected
+% by preceeding each fragile command with |\protect|. 
+% The result of the example above
+% would be the following two lines in the \file{.toc} file (assuming that it
+% is the second Part and is on page 34):
+% \begin{verbatim}
+% \contentsline {part}{II\hspace {1em}Part title}{34}
+% \mbox {}\hrulefill \par
+% \end{verbatim}
+% If the |\protect|s were not used, then the second line would instead be:
+% \begin{small}
+% \begin{verbatim}
+% \unhbox \voidb@x \hbox {}\unhbox \voidb@x \leaders \hrule \hfill \kern \z@ \par
+% \end{verbatim}
+% \end{small}
+%
+% \item You may get undesired page breaks in the ToC. For example you 
+% may have a long multiline section title and in the ToC there is a page
+% break between the lines. After your document is stable you can use
+% |\addtocontents| at appropriate places in the body of the document
+% to adjust the page breaking in the ToC. As examples:
+%  \begin{itemize}
+%  \item |\addtocontents{toc}{\protect\newpage}| to force a page break.
+%  \item |\addtocontents{toc}{\protect\enlargethispage{2\baselineskip}}| to 
+%        make the page longer.
+%  \item |\addtocontents{toc}{\protect\needspace{2\baselineskip}}| to specify
+%        that if there is not a vertical space of two baselines left on
+%        the page then start a new page (the |\needspace| macro is defined
+%        in the \Lpack{needspace} package).
+%  \end{itemize}
+%
+% \end{itemize}
+% Remember, if you are modifying any command that includes an |@| sign then this
+% must be done in either a \file{.sty} file or if in the document itself
+% it must be 
+% surrounded by |\makeatletter| and |\makeatother|. For example, if you
+% want to modify |\@dotsep| in the preamble to your document you have
+% to do it like this:
+% \begin{verbatim}
+% \makeatletter
+% \renewcommand{\@dotsep}{9.0}
+% \makeatother
+% \end{verbatim}
+% 
+%
+% \section{The \Lpack{tocloft} package} \label{sec:usc}
+%
+% The \Lpack{tocloft} package provides means of specifying the
+% typography of the Table of Contents (ToC), the List of Figures (LoF)
+% and the List of Tables (LoT).
+%
+% \DescribeMacro{\tableofcontents}
+% \DescribeMacro{\listoffigures}
+% \DescribeMacro{\listoftables}
+% The ToC, LoF, and LoT are printed at the point in the document where
+% these commands are called, as per normal \LaTeX. However, there is
+% one difference between the standard \LaTeX{} behaviour and the behaviour
+% with the \Lpack{tocloft} package. In the standard \LaTeX{} classes
+% that have |\chapter| headings, the ToC, LoF and LoT each appear on
+% a new page. With the \Lpack{tocloft} package they do not necessarily
+% start new pages; if you want them to be on new pages you may have to
+% specifically issue an appropriate command beforehand. For example:
+% \begin{verbatim}
+%  ...
+% \clearpage
+% \tableofcontents
+% \clearpage
+% \listoftables
+% ...
+% \end{verbatim}
+%
+% \DescribeMacro{\tocloftpagestyle}
+% The |\thispagestyle| page style of the ToC, LoF and/or LoT is set 
+% by the command
+% |\tocloftpagestyle{|\meta{style}|}|, where \meta{style} is one of
+% the available page styles. The package initially
+% sets |\tocloftpagestyle{plain}|.
+%
+% \subsection{Package options}
+%
+%    The package takes the following options:
+% \begin{itemize}
+% \item[\Lopt{subfigure}] This option is required if, and only if,
+% the \Lpack{tocloft} and
+% \Lpack{subfigure} packages are being used together. The two packages 
+% can be specified in any order.
+%
+% \item[\Lopt{titles}]
+% The \Lopt{titles} option causes
+% the titles of the ToC, LoF, and LoT lists to be typeset using the
+% default \LaTeX{} methods. This can be useful, for example, when the
+% \Lpack{tocloft} and \Lpack{fncychap} packages are used together and
+% the `fancy' chapter styles should be used for the ToC, etc., titles.
+%
+% \end{itemize}
+%
+% If you use the \Lopt{titles} option you can ignore the next 
+% section and continue reading at section~\ref{sec:entries}.
+%
+% \subsection{Changing the titles} \label{sec:titles}
+%
+%    Commands are provided for controlling the appearance of the
+% titles. Following \LaTeX{} custom, the title texts are the values
+% of the |\contentsname|, |\listfigurename| and |\listtablename| commands.
+%
+% Similar sets of commands are provided for ToC, LoF and LoT title
+% typsetting control. For convenience (certainly mine, and hopefully yours)
+% in the following
+% descriptions I will use |Z| to stand for `toc' or `lof' or `lot'. For
+% example, |\cftmarkZ| stands for |\cftmarktoc| or |\cftmarklof| or
+% |\cftmarklot|.
+%
+% \DescribeMacro{\cftmarkZ}
+% These macros set the appearance of the running heads on the ToC, LoF, and
+% LoT pages. You probably don't need to change these.
+%
+% \DescribeMacro{\cftbeforeZtitleskip}
+% \DescribeMacro{\cftafterZtitleskip}
+% These lengths control the vertical spacing before and after the titles.
+% You can change them from their default values by using |\setlength|.
+%
+% \DescribeMacro{\cftZtitlefont}
+% \DescribeMacro{\cftafterZtitle}
+% The code used for typesetting the ToC title looks like
+% \begin{verbatim}
+% {\cfttoctitlefont \contentsname}{\cftaftertoctitle}\par
+% \end{verbatim}
+% By default, |\cftZtitlefont| is defined as a font specification
+% (e.g., |\Large\bfseries|), and |\cftafterZtitle| is empty.
+% These commands can be changed (via |\renewcommand|) to change
+% the typesetting. As examples:
+% \begin{itemize}
+% \item |\renewcommand{\cftZtitlefont}{\hfill\Large\itshape}| will
+%       result in a Large italic title typeset flushright.
+% \item |\renewcommand{\cftZtitlefont}{\hfill\Large\bfseries}| together
+%       with |\renewcommand{\cftafterZtitle}{\hfill}| will give
+%       a centered Large bold title.
+% \item Doing
+% \begin{verbatim}
+% \renewcommand{\cftafterZtitle}{%
+%   \\[\baselineskip]\mbox{}\hfill{\normalfont Page}}
+% \end{verbatim}
+%       will put the word `Page' flushright on the line following the title.
+%       (If you do this, then you may need to decrease 
+%        |\cftafterZtitleskip|).
+% \item |\renewcommand{\cftafterZtitle}{\thispagestyle{empty}}| will
+%       make the page with the title empty (i.e., the page
+%       number will not be printed).
+% \end{itemize}
+%
+%
+% \subsection{Typesetting the entries} \label{sec:entries}
+%
+% Commands are also provided to enable finer control over the typesetting
+% of the different kinds of entries. The parameters defining the default
+% layout of the entries are illustrated as part of the \Lpack{layouts}
+% package or in~\cite[page 34]{GOOSSENS94}, and are repeated in
+% Figure~\ref{fig:ltoc}.
+%
+% \DescribeMacro{\cftdot}
+%  In the default ToC typsetting only the more minor entries have dotted
+% leader lines between the sectioning title and the page number. The
+% \Lpack{tocloft} package provides for general leaders for all entries.
+% The `dot' in a leader is given by the value of |\cftdot|. Its default
+% definition is |\newcommand{\cftdot}{.}| which gives the default
+% dotted leader. By changing |\cftdot| you can use symbols other than
+% a period in the leader. For example 
+% \begin{verbatim}
+% \renewcommand{\cftdot}{\ensuremath{\ast}}
+% \end{verbatim}
+% will result in a dotted leader using asterisks as the symbol.
+%
+% \DescribeMacro{\cftdotsep}
+% \DescribeMacro{\cftnodots}
+%    Each kind of entry can control the seperation between the dots
+% in its leader (see below). For consistency though, all dotted leaders
+% should use the same spacing. The macro |\cftdotsep| specifies the
+% default spacing. Its value is a number. 
+% However, if the seperation is too large
+% then no dots will be actually typeset. The macro |\cftnodots| is
+% a seperation value that is `too large'.
+%
+% \DescribeMacro{\cftsetpnumwidth}
+% \DescribeMacro{\cftsetrmarg}
+% The page numbers are typeset in a fixed width box. The command
+% |\cftsetpnumwidth{|\meta{length}|}| can be used to change the width
+% of the box (\LaTeX 's internal |\@pnumwidth|). 
+% The title texts will end before reaching the righthand margin.
+% |\cftsetrmarg{|\meta{length}|}| can be used to set this distance 
+% (\LaTeX 's internal |\@tocrmarg|).
+% Note that the length used in |\cftsetrmarg| should be greater
+% than the length set in |\cftsetpnumwidth|. These values should remain
+% constant in any given document.
+%
+% \DescribeMacro{\cftparskip}
+% Normally the |\parskip| in the ToC, etc., is zero. This may be changed
+% by changing the |\cftparskip| length. Note that the current value
+% of |\cftparskip| is used for the ToC, LoF and LoT, but you can change
+% the value before calling |\tableofcontents| or |\listoffigures| or
+% |\listoftables| if one or other of these should have different values
+% (which is not a good idea).
+%
+%
+%    In the following I will use |X| to stand for the following:
+% \begin{itemize}
+% \item |part| for |\part| titles
+% \item |chap| for |\chapter| titles
+% \item |sec| for |\section| titles
+% \item |subsec| for |\subsection| titles
+% \item |subsubsec| for |\subsubsection| titles
+% \item |para| for |\paragraph| titles
+% \item |subpara| for |\subparagraph| titles
+% \item |fig| for figure |\caption| titles
+% \item |subfig| for subfigure |\caption| titles
+% \item |tab| for table |\caption| titles
+% \item |subtab| for subtable |\caption| titles
+% \end{itemize}
+%
+% \DescribeMacro{\cftbeforeXskip}
+% This controls the vertical space before an entry. It can be changed
+% by using |\setlength|. 
+%
+% \DescribeMacro{\cftXindent}
+% This controls the indentation of an entry from the left margin 
+% (\textit{indent} in Figure~\ref{fig:ltoc}). It
+% can be changed using |\setlength|. 
+%
+% \DescribeMacro{\cftXnumwidth}
+% This controls the space allowed for typesetting title numbers 
+% (\textit{numwidth} in Figure~\ref{fig:ltoc}). It can
+% be changed using |\setlength|. Second and subsequent lines of a multiline
+% title will be indented by this amount.
+%
+% The remaining commands are related to the specifics of typesetting
+% an entry.
+% This is a simplified pseudo-code version for the typesetting of numbered 
+% and unnumbered entries.
+% \begin{verbatim}
+% {\cftXfont {\cftXpresnum SNUM\cftXaftersnum\hfil} \cftXaftersnumb TITLE}%
+%         {\cftXleader}{\cftXpagefont PAGE}\cftXafterpnum\par
+%
+% {\cftXfont TITLE}{\cftXleader}{\cftXpagefont PAGE}\cftXafterpnum\par
+% \end{verbatim}
+% where |SNUM| is the section number, |TITLE| is the title text and |PAGE| 
+% is the page number. In the numbered entry the pseudo-code \\
+% |{\cftXpresnum SNUM\cftaftersnum\hfil}| \\
+% is typeset within a box of width |\cftXnumwidth|.
+%
+% \DescribeMacro{\cftXfont}
+% This controls the appearance of the title (and its preceeding number, 
+% if any). It may be changed using |\renewcommand|.
+%
+% \DescribeMacro{\cftXpresnum}
+% \DescribeMacro{\cftXaftersnum}
+% \DescribeMacro{\cftXaftersnumb}
+% \changes{v1.1}{2000/02/11}{Added description of \cs{cftXpresnum}}
+% Normally the section number is typeset within a box of width |\cftXnumwidth|.
+% Within the box the macro |\cftXpresnum| is first called, then the
+% number is typeset, and next the |\cftXaftersnum|
+% macro is called after the number is typeset. The last command
+% within the box is |\hfil| to make the box contents flushleft.
+% After the box is
+% typeset the |\cftXaftersnumb| macro is called before typesetting
+% the title text. All three of these can be changed by |\renewcommand|.
+% By default they are defined to do nothing.
+%
+% In the standard classes the ToC entry for a |\part| is just typeset as
+% the number and title, followed by the page number, with the 
+% |\cftpartpresnum|
+% macro being called before typesetting the number and title. When a 
+% standard class is used the |\cftpartaftersnum| and 
+% |\cftpartaftersnumb| macros have no effect, but they may do something
+% if a non-standard class is used.
+%
+%
+% \DescribeMacro{\cftXleader}
+% \DescribeMacro{\cftXdotsep}
+% |\cftXleader| defines the leader between the title and the page number;
+% it can be changed by |\renewcommand|.
+% The spacing between any dots in the leader is controlled by |\cftXdotsep| 
+% (|\@dotsep| in Figure~\ref{fig:ltoc}).
+% It can be changed by |\renewcommand| and its value must be either a
+% number (e.g., 6.6 or |\cftdotsep|) or |\cftnodots| (to disable the dots).
+% The spacing
+% is in terms of \emph{math units} where there are 18mu to 1em.
+%
+% \DescribeMacro{\cftXpagefont}
+% This defines the font to be used for typesetting the page number. It
+% can be changed by |\renewcommand|.
+%
+% \DescribeMacro{\cftXafterpnum}
+% This macro is called after the page number has been typeset. Its default
+% is to do nothing. It can be changed by |\renewcommand|.
+%
+% \DescribeMacro{\cftsetindents}
+% The command 
+% |\cftsetindents{|\meta{entry}|}{|\meta{indent}|}{|\meta{numwidth}|}|
+% sets the \meta{entry}'s \textit{indent} to the length \meta{indent} and its
+% \textit{numwidth} to the length \meta{numwidth}. The \meta{entry} argument
+% is the name of one of the standard entries (e.g., |subsection|) or the name of 
+% entry that has been defined with the \Lpack{tocloft} package. 
+% For example \\
+% |\cftsetindents{figure}{0em}{1.5em}| \\
+% will make figure entries left justified.
+%
+%
+% Various effects can be achieved by changing the definitions of |\cftXfont|,
+% |\cftXaftersnum|, |\cftXaftersnumb|, |\cftXleader| and |\cftXafterpnum|, 
+% either singly or in combination.
+% For the sake of some examples, assume that we have the following initial
+% definitions
+% \begin{verbatim}
+% \newcommand{\cftXfont}{}
+% \newcommand{\cftXaftersnum}{}
+% \newcommand{\cftXaftersnumb}{}
+% \newcommand{\cftXleader}{\cftdotfill{\cftXdotsep}}
+% \newcommand{\cftXdotsep}{\cftdotsep}
+% \newcommand{\cftXpagefont}{}
+% \newcommand{\cftXafterpnum}{}
+% \end{verbatim}
+% (Note that the same font should be used for the title, leader and page 
+% number to provide a coherent appearance).
+%
+% \begin{itemize}
+% \item To eliminate the dots in the leader:
+% \begin{verbatim}
+% \renewcommand{\cftXdotsep}{\cftnodots}
+% \end{verbatim}
+%
+% \item To put something (e.g., a name) before the title (number):
+% \begin{verbatim}
+% \renewcommand{\cftXpresnum}{SOMETHING }
+% \end{verbatim}
+%
+% \item To add a colon after the section number:
+% \begin{verbatim}
+% \renewcommand{\cftXaftersnum}{:}
+% \end{verbatim}
+%
+% \item To put something before the title number, add a colon after the
+%    the title number, set everything in bold font,
+% and start the title text on the following line:
+% \begin{verbatim}
+% \renewcommand{\cftXfont}{\bfseries}
+% \renewcommand{\cftXleader}{\bfseries\cftdotfill{\cftXdotsep}}
+% \renewcommand{\cftXpagefont}{\bfseries}
+% \renewcommand{\cftXpresnum}{SOMETHING }
+% \renewcommand{\cftXaftersnum}{:}
+% \renewcommand{\cftXaftersnumb}{\\}
+% \end{verbatim}
+%
+%    If you are adding text in the number box in addition to the number,
+% then you will probably have to increase the width of the box so that
+% multiline titles have a neat vertical alignment; changing box widths
+% usually implies that the indents will require modification as 
+% well.\footnote{Lyndon Dudding (\texttt{lyndon.dudding@totalise.co.uk})
+% discovered this.}
+% One possible method of adjusting the box width for the above example
+% is:
+% \begin{verbatim}
+% \newlength{\mylen}   % a "scratch" length
+% \settowidth{\mylen}{\bfseries\cftXpresnum\cftXaftersnum} % extra space
+% \addtolength{\cftXnumwidth}{\mylen} % add the extra space
+% \end{verbatim} 
+%
+% \item To set the section numbers flushright:\footnote{With thanks to
+% David Holz (\texttt{lbda@earthlink.net}) for requesting this.}
+% \begin{verbatim}
+% \setlength{\mylen}{0.5em}   % need some extra space at end of number
+% \renewcommand{\cftXpresnum}{\hfill}  % note the double `l'
+% \renewcommand{\cftXaftersnum}{\hspace*{\mylen}}
+% \addtolength{\cftXnumwidth}{\mylen}
+% \end{verbatim}
+% In the above, the added initial |\hfill| in the box overrides the
+% final |\hfil| in the box, thus shifting everything to the right hand
+% end of the box. The extra space is so that the number is not typeset
+% immediately at the left of the title text.
+%
+% \item To set the entry ragged left (but this only looks good for single
+%       line titles):
+% \begin{verbatim}
+% \renewcommand{\cftXfont}{\hfill\bfseries}
+% \renewcommand{\cftXleader}{}
+% \end{verbatim}
+%
+% \item To set the page number immediately after the entry text instead of at
+%       the righthand margin:
+% \begin{verbatim}
+% \renewcommand{\cftXleader}{}
+% \renewcommand{\cftXafterpnum}{\cftparfillskip}
+% \end{verbatim}
+% By default the |\parfillskip| value is locally set to fill up the last
+% line of a paragraph. Just changing |\cftXleader| puts horrible interword
+% spaces into the last line of the title. The |\cftparfillskip| 
+% command
+% is part of the \Lpack{tocloft} package and is provided just so that
+% the above effect can be achieved.
+% \end{itemize}
+%
+% \DescribeMacro{\cftpagenumbersoff}
+% \DescribeMacro{\cftpagenumberson}
+% The command |\cftpagenumbersoff{|\meta{entry}|}| will
+% eliminate the page numbers for \meta{entry} in the listing, where
+% \meta{entry} is the name of one of the standard
+% kinds of entries (e.g., |subsection|, or |figure| --- including |subfigure|
+% if the \Lpack{subfigure} package is used --- etc.), or the name of a
+% new entry defined wih the \Lpack{tocloft} package. 
+%
+%    The command |\cftpagenumberson{|\meta{entry}|}| reverses
+% the effect of a corresponding |\cftpagenumbersoff|.
+% 
+% One question that appeared on the \file{comp.text.tex} newsgroup asked
+% how to get the titles of Appendices list in the ToC \emph{without} 
+% page numbers. Here is a simple way of doing it, assuming the document
+% has chapters
+% \begin{verbatim}
+% ...
+% \appendix
+% \addtocontents{toc}{\cftpagenumbersoff{chapter}}
+% \chapter{First appendix}
+% \end{verbatim}
+% If there are other chaptered headings to go into the ToC after the 
+% appendices, then it will be necessary to do a similar \\
+% |\addtocontents{toc}{\cftpagenumberson{chapter}}| \\
+% to restore the page numbering in the ToC.
+%
+%    Similarly, if you are using the \Lpack{subfigure} package you may
+% want to eliminate the page numbers for the subfigure captions. This
+% can be accomplished by: \\
+% |\cftpagenumbersoff{subfigure}|
+%
+% At this point, I leave it up to your ingenuity as to other effects that
+% you can achieve. However, if you come up with further examples, let me
+% know for possible inclusion in a later version of this document.
+%
+% \subsection{New list of\ldots}
+%
+% \DescribeMacro{\newlistof}
+% The command |\newlistof[|\meta{within}|]{|\meta{entry}|}{|\meta{ext}|}{|\meta{listofname}|}|
+% creates a new List of \ldots, and assorted commands to go along with it.
+% 
+% The first required argument, \meta{entry} is used to define a new
+% counter called |entry|. The optional \meta{within} argument can
+% be used so that |entry| gets reset to one every time the counter called 
+% |within| is changed. That is, the first two arguments are equivalent to
+% calling |\newcounter{|\meta{entry}|}[|\meta{within}|]|. 
+%
+% The next argument, \meta{ext}, is the file extension for the new List of.
+% The last argument, \meta{listofname}, is the text for the heading of the
+% new List of. As an example:
+% \begin{verbatim}
+% \newcommand{\listanswername}{List of Answers}
+% \newlistof[chapter]{answer}{ans}{\listanswername}
+% \end{verbatim}
+% will create a new |answer| counter that will be reset at the start of each
+% |\chapter{...}|. Any answer titles will be written to the file 
+% \file{jobname.ans} and |\listanswername| will be used as the list heading.
+% A command |\listofanswer| is created which can be used just like the
+% |\listoftables| or |tableofcontents| commands to generate a listing.
+% It is up to you to specify how the entries are put into the 
+% new List of Answers. Here is a very simple example, remembering that an
+% |answer| counter has been created.
+% \begin{verbatim}
+% \newcommand{\answer}[1]{%
+%   \refstepcounter{answer}
+%   \par\noindent\textbf{Answer \theanswer. #1}
+%   \addcontentsline{ans}{answer}{\protect\numberline{\theanswer}#1}\par}
+% \end{verbatim}
+% which, when used like: \\ 
+% |\answer{Hard} The \ldots|  will print as: 
+% \par\noindent\textbf{Answer 1. Hard}\par The \ldots
+%
+%    As mentioned above, the |\newlistof| command creates several new 
+% commands, most of which you should now be familiar with. For convenience,
+% assume that |\newlistof{X}{Z}{...}| has been issued; so |X| is the name
+% of the new counter and corresponds to the |X| in section~\ref{sec:entries},
+% and |Z| is the new file extension and corresponds to the |Z| in
+% section~\ref{sec:titles}. Then, among others, the following new commands 
+% will be made available.
+%
+% The five commands, |\cftmarkZ|, 
+% |\cftbeforeZtitleskip|, 
+% |\cftafterZtitleskip|, 
+% |\cftZtitlefont|, and
+% |\cftafterZtitle|, 
+% are analagous to the commands of the same names
+% described in section~\ref{sec:titles}.
+%
+% \DescribeMacro{\listofX}
+% The command |\listofX| is similar to |\listoftables|, etc., 
+% in that it typesets
+% the new listing at the point where it is called.
+%
+% \DescribeMacro{\Zdepth}
+% The command |\Zdepth{|\meta{number}|}| is analagous to the standard
+% |\tocdepth{|\meta{number}|}| command, in that it specifies that entries
+% in the new listing should not be typeset if their numbering level 
+% is greater
+% than \meta{number}. The default definition is 
+% |\setcounter{Zdepth}{1}|.
+%
+% \DescribeMacro{\newlistentry}
+% The command 
+% |\newlistentry[|\meta{within}|]{|\meta{entry}|}{|\meta{ext}|}{|\meta{level-1}|}| creates
+% new commands for typesetting a new kind of entry in a listing. It is used
+% internally by the |\newlistof| command but may be used independently.
+% 
+% The first required argument, \meta{entry} is used to define a new
+% counter called |entry|. The optional \meta{within} argument can
+% be used so that |entry| gets reset to one every time the counter called 
+% |within| is changed. That is, the first two arguments are equivalent to
+% calling |\newcounter{|\meta{entry}|}[|\meta{within}|]|. 
+% The second required argument, \meta{ext}, is the file extension for the
+% entry listing.
+% The last argument, \meta{level-1}, is a number specifying the numbering
+% level minus one, 
+% of the entry in a listing.
+% For example, the command \\
+% |\newlistof[chapter]{answer}{ans}{\listanswername}| \\
+% will call the command: \\
+% |\newlistentry[chapter]{answer}{ans}{0}| \\
+%
+%
+%    Calling |\newlistentry| creates several new commands. Assuming that
+% it is called as |\newlistentry[within]{X}{Z}{N}|, where |X| and |Z| are
+% similar to the
+% previous uses of them, and |N| is an integer number, then the following
+% commands are made available.
+%
+%  The set of commands |\cftbeforeXskip|, 
+% |\cftXfont|, 
+% |\cftXpresnum|, 
+% |\cftXaftersnum|, 
+% |\cftXaftersnumb|, 
+% |\cftXleader|, 
+% |\cftXdotsep|, 
+% |\cftXpagefont|, and
+% |\cftXafterpnum|,
+%  are analagous to the commands of the same names
+% described in section~\ref{sec:entries}. Their default values are also
+% as described earlier.
+%
+% The default values of |\cftXindent| and |\cftXnumwidth| are set according
+% to the value of the \meta{level-1} argument (i.e., |N| in this example).
+% For |N=0| the settings correspond to those for 
+% sections in non-chaptered documents, as listed in Table~\ref{tab:indents}.
+% For |N=4| the settings correspond
+% to subparagraphs in non-chaptered documents, and for intermediate values
+% correspond to the matching sectional division in chaptered documents.
+% For values of |N| less than zero or greater than four, 
+% or for non-default values, use the
+% |\cftsetindents| command to set the values.
+%
+%
+% \DescribeMacro{\l@X}
+%  |\l@X| is an internal command that typesets an entry in the list, and
+% is defined in terms of the above |\cft*X*| commands. It will not typeset
+% an entry if |\Zdepth| is |N| or less, where |Z| is the listing's file
+% extension.
+%
+% \DescribeMacro{\theX}
+% The command |\theX| prints the value of the |X| counter. It is initially
+% defined so that it prints arabic numerals. If the optional \meta{within}
+% argument is used, |\theX| is defined as \\
+% |\renewcommand{\theX}{\thewithin.\arabic{X}}| otherwise as \\
+% |\renewcommand{\theX}{\arabic{X}}|.
+%
+%
+% As an example of the independent use of |\newlistentry|, the following
+% will set up for sub-answers.
+% \begin{verbatim}
+% \newlistentry[answer]{subanswer}{1}
+% \cftsetindents{subanswer}{1.5em}{3.0em}
+% \renewcommand{\thesubanswer}{\theanswer.\alph{subanswer}}
+% \newcommand{\subanswer}[1]{%
+%    \refstepcounter{subanswer}
+%    \par\textbf{\thesubanswer) #1}
+%    \addcontentsline{ans}{subanswer{\protect\numberline{\thesubanswer}#1}}
+% \setcounter{ansdepth}{2}
+% \end{verbatim}
+% And then:
+% \begin{verbatim}
+% \answer{Harder} The \ldots
+%   \subanswer{Reformulate the problem} It assists \ldots
+% \end{verbatim}
+% will be typeset as:
+% \par\noindent\textbf{Answer 2. Harder}\par The \ldots
+% \par\textbf{2.a) Reformulate the problem} It assists \ldots
+%
+% By default the answer entries will appear in the List of Answers listing
+% (typeset by the |\listofanswer| command).
+% In order to get the subanswers to appear, 
+% the |\setcounter{ansdepth}{2}| command was used above.
+%
+% To turn off page numbering for the subanswers, do \\
+% |\cftpagenumbersoff{subanswer}|
+%
+%    As another example of |\newlistentry|, suppose that an extra sectioning
+% division below |subparagraph| is required, called |subsubpara|.
+% The |\subsubpara| command itself can be defined via the LaTeX kernel
+% |\@startsection| command. 
+% Also it is necessary to define a |\subsubparamark| macro,
+% a new |subsubpara| counter, a |\thesubsubpara| macro and a |\l@subsubpara|
+% macro. Using the \Lpack{tocloft} package's |\newlistentry| 
+% takes care of most of these as shown below (remember
+% the caveats about commands with |@| signs in them).
+% \begin{verbatim}
+% \newcommand{\subsubpara}{\@startsection{subpara}%
+%    {6}%                                                level
+%    {\parindent}%                     indent from left margin
+%    {3.25ex \@plus1ex \@minus .2ex}%       skip above heading
+%    {-1em}%       runin heading with 1em between title & text
+%    {\normalfont\normalsize\itshape}% italic number and title 
+% }
+% \newlistentry[subparagraph]{subsubpara}{toc}{5}
+% \cftsetindents{subsubpara}{14.0em}{7.0em}
+% \newcommand*{\subsubparamark}[1]{}     % gobble heading mark
+% \end{verbatim}
+% 
+%
+%     Each List of\ldots uses a file to store the list entries, and these
+% files must remain open for writing throughout the document processing.
+% TeX has only a limited number of files that it can keep open, and this
+% puts a limit on the number of listings that can be used. For a document
+% that includes a ToC but no other extra ancilliary files (e.g., no
+% index or bibliography output files) the maximum number of LoX's, including
+% a LoF and LoT, is no more than about eleven. If you try and create too many
+% new listings LaTeX will respond with the error message: 
+% \begin{center}
+% |No room for a new write| 
+% \end{center}
+% If you get such a message the only recourse is to redesign your document.
+%
+%    The \Lpack{tocloft} package does not provide a simple means of specifying
+% new Lists of Floats or float environments. 
+% For those, I recommend the \Lpack{ccaption} package~\cite{CCAPTION}.
+%
+% \subsection{Experimental utilities}
+%
+% The macros described in this section are even more experimental than
+% those described previously.
+%
+% \DescribeMacro{\cftchapterprecis}
+%   Some old style novels, and even some modern text 
+% books,\footnote{For example, Robert Sedgewick, \textit{Algorithms},
+% Addison-Wesley, 1983.} include a short synopsis of the contents of 
+% the chapter either immediately
+% after the chapter heading or in the Toc, or in both places.
+%
+%     The command |\cftchapterprecis{|\meta{text}|}| prints its argument 
+% both at the
+% point in the document where it is called, and also adds it to the \file{.toc}
+% file. For example:
+% \begin{verbatim}
+% ...
+% \chapter{} % first chapter
+% \cftchapterprecis{Our hero is introduced; family tree; early days.}
+% ...
+% \end{verbatim}
+%
+% \DescribeMacro{\cftchapterprecishere}
+% \DescribeMacro{\cftchapterprecistoc}
+% The |\cftchapterprecis| command calls these two commands to print the
+% text in the document (the |\...here{|\meta{text}|}| command) 
+% and to put it into the ToC (the |\...toc{|\meta{text}|}| command). 
+% These can be used individually if required.
+%
+% Sometimes it may be desirable to make a change to the global parameters
+% for an individual entry. For example, a figure might be placed on
+% the end paper of a book (the inside of the front or back cover), and
+% this needs to be placed in a LoF with the page number set as, say
+% `inside front cover'. If `inside front cover' is typeset as an ordinary
+% page number it will stick out into the margin. Therefore, the parameters
+% for this particular entry need to be changed.
+%
+% \DescribeMacro{\cftlocalchange}
+% The command |\cftlocalchange{|\meta{file}|}{|\meta{pnumwidth}|}{|\meta{tocrmarg}|}|
+% will write an entry into \meta{file} to reset the global parameters. 
+% The command should be called again after any special entry to reset
+% the parameters back to their usual values. Any fragile commands used
+% in the arguments must be protected.
+%
+% \DescribeMacro{\cftaddtitleline}
+% The command |\cftaddtitleline{|\meta{file}|}{|\meta{kind}|}{|\meta{title}|}{|\meta{page}|}|
+% will write a |\contentsline| entry into \meta{file} for a \meta{kind}
+% entry with title \meta{title} and page number \meta{page}. That is,
+% an entry is made of the form: \\
+% |\contentsline{kind}{title}{page}| \\
+% Any fragile commands used in the arguments must be protected.
+%
+% \DescribeMacro{\cftaddnumtitleline}
+% The command |\cftaddnumtitleline{|\meta{file}|}{|\meta{kind}|}{|\meta{num}|}{|\meta{title}|}{|\meta{page}|}|
+% is similar except that it also includes \meta{num} as the argument to
+% the |\numberline|. That is, an entry is made of the form: \\
+% |\contentsline{kind}{\numberline{num} title}{page}| \\
+% Any fragile commands used in the arguments must be protected.
+%
+% As an example of the use of these commands, 
+% noting that the default \LaTeX{} values for 
+% |\@pnumwidth| and |\@tocrmarg| are 1.55em and 2.55em respectively, 
+% one might do the
+% following for a figure on the frontispiece page.
+% \begin{verbatim}
+% ...
+% % this is the frontispiece page with no number
+% % draw or import the picture (with no \caption)
+% \cftlocalchange{lof}{4em}{5em} % make pnumwidth big enough for 
+%                                % frontispiece and change margin to suit
+% \cftaddtitleline{lof}{figure}{The title}{frontispiece}
+% \cftlocalchange{lof}{1.55em}{2.55em} % return to normal settings
+% ...
+% \end{verbatim}
+%    Recall that a |\caption| command will put an entry in the \file{.lof}
+% file, which is not wanted here. If a caption is required, then you can 
+% either craft one youself or, assuming that your general captions are not
+% too exotic, use the |\legend| command from the
+% \Lpack{ccaption} package. If the illustration is numbered, use the
+% |\cftaddnumtitleline| command instead of |\cftaddtitleline|.
+%
+% \subsection{Usage with other packages}
+%
+%    The \Lpack{tocloft} and \Lpack{tocbibind} packages can be used together
+% in the same document. The \Lpack{tocbibind} package provides easy means
+% of adding document elements like the bibliography or the index to the 
+% Table of Contents. However there are two known potential problems:
+% \begin{itemize}
+% \item The 1998/11/15 version of \Lpack{tocbibind} may give surprising
+% results if the |\toctocname|, |\toclotname| or |\toclofname| commands
+% have been used. You should consider getting the current version of
+% \Lpack{tocbibind}.
+% \item If the argument to the |\tocotherhead| command is other than one
+% of the normal sectioning divisions (i.e., part through to sub-paragraph)
+% such as |\tocotherhead{clause}|,
+% then this will almost certainly cause a problem (as the \Lpack{tocloft}
+% package will not know how to define the corresponding |\l@clause| command).
+% In such a case you will have to supply the appropriate macros youself.
+% \end{itemize}
+%
+% \DescribeMacro{\@cftbsnum}
+% \DescribeMacro{\@cftasnum}
+% \DescribeMacro{\@cftasnumb}
+%    Some packages, like the \Lpack{float} package by Anselm Lingnau,
+% enable the creation of other kinds of \textit{List of \ldots}. 
+% The \Lpack{tocloft} package is only minimally able to change the 
+% formatting of these, 
+% principally because the packages are independent of each other and, in
+% the case of the \Lpack{float} package, new kinds of float environments
+% and their associated lists can be created on the fly at any point in 
+% a document. Some aspects of the typesetting 
+% are controlled by |\@cftbsnum|, |\@cftasnum| and |\@cftasnumb| commands.
+% These are equivalent to the |\cftXpresnum|, |\cftXaftersnum| and |\cftXaftersnumb|
+% commands described earlier. By default they are defined to do nothing, but
+% may be renewed to do something.
+%
+%   The \Lpack{tocloft} and \Lpack{minitoc} packages have an unfortunate
+% interaction,\footnote{Discovered by Lyndon Dudding 
+% (\texttt{lyndon.dudding@totalise.co.uk}).} which fortunately can be fixed.
+% In the normal course of events, when \Lpack{minitoc} is used in a chaptered
+% document it will typeset section
+% entries in the minitocs in bold font. If \Lpack{tocloft} is used in
+% conjunction with \Lpack{minitoc}, then the minitoc section entries are 
+% typeset in the normal font, except for the page numbers which are in
+% bold font, while the ToC section entries are all in normal font.
+%
+%    One cure, if you want the minitoc section entries to be all in normal
+% font is to put:
+% \begin{verbatim}
+% \renewcommand{\mtcSfont}{\small\normalfont}
+% \end{verbatim}
+% in the preamble.
+%
+%    Otherwise, the cure is the following incantation:
+% \begin{verbatim}
+% \renewcommand{\cftsecfont}{\bfseries}
+% \renewcommand{\cftsecleader}{\bfseries\cftdotfill{\cftdotsep}}
+% \renewcommand{\cftsecpagefont}{\bfseries}
+% \end{verbatim}
+% To have the section entries in both the ToC and the minitocs in bold then
+% put the incantation in the preamble. To have only the minitoc section
+% entries in bold while the ToC entries are in the normal font, 
+% put the incantation between the |\tableofcontents|
+% command and the first |\chapter| command.
+%
+%
+% In general, use with other packages that redefine any of the macros that
+% \Lpack{tocloft} also modifies is likely to be problematic.
+%
+% \section{The package code} \label{sec:code}
+%
+%    Announce the name and version of the package, which requires
+% \LaTeXe{} but no extra packages.
+%    \begin{macrocode}
+%<*usc>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{tocloft}[2003/09/26 v2.3c parameterised ToC, etc., typesetting]
+%    \end{macrocode}
+%
+% \begin{macro}{\PRWPackageNote}
+% \begin{macro}{\PRWPackageNoteNoLine}
+% These two commands write a Package Note to the terminal and the log file.
+% Use as: |\PRWPackageNote{|\meta{package name}|}{|\meta{note text}|}|.
+% The NoLine version does not show the line number. The commands are intermediate
+% between the kernel |\PackageWarning| and |\PackageInfo| commands.
+% I have |\provide|d the |\PRW...| commands as other packages (of mine)
+% may also incorporate them. The code is based on \file{lterror.dtx}.
+% \changes{v1.0}{1999/09/19}{Added PRWPackageNote and PRWPackageNoteNoLine
+%                            commands}
+%    \begin{macrocode}
+\providecommand{\PRWPackageNote}[2]{%
+  \GenericWarning{%
+    (#1)\@spaces\@spaces\@spaces\@spaces
+  }{%
+   Package #1 Note: #2%
+   }%
+}
+\providecommand{\PRWPackageNoteNoLine}[2]{%
+  \PRWPackageNote{#1}{#2\@gobble}%
+}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% In order to try and avoid name clashes with other packages, each internal
+% name will include the character string \texttt{@cft}.
+%
+% \begin{macro}{\@cftquit}
+% \begin{macro}{\if@cfthaschapter}
+% We will be using either chapter or section type headings for the ToC, etc.,
+% so we need to know which of these the document class supports.
+% \changes{v2.0}{2001/03/03}{Revamped chapter checking so the stdclsdv package no longer required}
+%    \begin{macrocode}
+\newcommand{\@cftquit}{}
+\newif\if@cfthaschapter
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\if@cftkoma}
+% The \Lpack{koma} classes have different defaults than the standard classes,
+% so we need to know if a \Lpack{koma} class has been loaded.
+% \changes{v2.3}{2002/06/15}{Added check for a koma class}
+%    \begin{macrocode}
+\newif\if@cftkoma
+  \@cftkomafalse
+\@ifclassloaded{scrartcl}{\@cftkomatrue}{}
+\@ifclassloaded{scrreprt}{\@cftkomatrue}{}
+\@ifclassloaded{scrbook}{\@cftkomatrue}{}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% Issue a warning if there are no recognised sectional divisions 
+% and then skip the rest of the package code.
+%    \begin{macrocode}
+\@ifundefined{chapter}{%
+  \@cfthaschapterfalse
+  \@ifundefined{section}{%
+    \PackageWarning{tocloft}%
+      {I don't recognize any sectional divisions so I'll do nothing}
+    \renewcommand{\@cftquit}{\endinput}
+    }{\PRWPackageNoteNoLine{tocloft}{The document has section divisions}} 
+  }{\@cfthaschaptertrue
+    \PRWPackageNoteNoLine{tocloft}{The document has chapter divisions}}
+%    \end{macrocode}
+% Perhaps quit now.
+%    \begin{macrocode}
+\@cftquit
+%    \end{macrocode}
+% 
+% Use chapter style if |\if@cfthaschapter| is TRUE, otherwise section style.
+%
+% \begin{macro}{\if@cfttocbibind}
+% A flag that is set TRUE iff the \Lpack{tocbibind} package has been loaded.
+% The 1998/11/15 version of \Lpack{tocbibind} does not necessarily work well
+% with \Lpack{tocloft}.
+%    \begin{macrocode}
+\newif\if@cfttocbibind
+\AtBeginDocument{%
+  \@ifpackageloaded{tocbibind}{\@cfttocbibindtrue}{\@cfttocbibindfalse}
+  \if@cfttocbibind
+    \@ifpackagelater{tocbibind}{1998/11/16}{}{%
+      \PackageWarning{tocloft}{%
+You are using a version of the tocbibind package\MessageBreak
+that is not compatible with tocloft.\MessageBreak
+The results may be surprising.\MessageBreak
+Consider installing the current version of tocbibind.}}
+  \fi
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@cftnctoc}
+% A boolean used to implement the \Lopt{titles} option. It is TRUE
+% if the ToC, LoT, LoF titles should use the default styles.
+%    \begin{macrocode}
+\newif\if@cftnctoc\@cftnctocfalse
+\DeclareOption{titles}{\@cftnctoctrue}
+  %% \ProcessOptions\relax
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@cftsubfigopt}
+% A boolean used to implement the \Lopt{subfigure} option. 
+%    \begin{macrocode}
+\newif\if@cftsubfigopt\@cftsubfigoptfalse
+\DeclareOption{subfigure}{\@cftsubfigopttrue}
+%    \end{macrocode}
+% \end{macro}
+%
+% Process the options.
+%
+%    \begin{macrocode}
+
+\ProcessOptions\relax
+
+%    \end{macrocode}
+%
+% \begin{macro}{\tocloftpagestyle}
+% \begin{macro}{\@cftpagestyle}
+% A user-level macro to set the pagestyle for the first page of the ToC, etc.
+% The default is the |plain| pagestyle.
+% \changes{v2.3}{2002/06/15}{Added \cs{tocloftpagestyle}}
+%    \begin{macrocode}
+\newcommand{\tocloftpagestyle}[1]{%
+  \def\@cftpagestyle{\thispagestyle{#1}}}
+\tocloftpagestyle{plain}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftmarktoc}
+% \begin{macro}{\cftmarklof}
+% \begin{macro}{\cftmarklot}
+%  These three macros set the style for running heads. They are initialised
+% to give the default appearance.
+% \changes{v2.3}{2002/06/15}{Marking commands are different for koma}
+%    \begin{macrocode}
+\newcommand{\cftmarktoc}{%
+  \@mkboth{\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}
+\newcommand{\cftmarklof}{%
+  \@mkboth{\MakeUppercase\listfigurename}{\MakeUppercase\listfigurename}}
+\newcommand{\cftmarklot}{%
+  \@mkboth{\MakeUppercase\listtablename}{\MakeUppercase\listtablename}}
+\if@cftkoma
+  \renewcommand{\cftmarktoc}{%
+    \@mkboth{\contentsname}{\contentsname}}
+  \renewcommand{\cftmarklof}{%
+    \@mkboth{\listfigurename}{\listfigurename}}
+  \renewcommand{\cftmarklot}{%
+    \@mkboth{\listtablename}{\listtablename}}
+\fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@cfttocstart}
+% \begin{macro}{\@cfttocfinish}
+% Two macros to perform the actions at the beginning and end of the
+% |\tableofcontents| command (and friends). |\@cfttocstart| deals with
+% chaptered documents, ensuring that the ToC is typeset in a single
+% column (see \file{classes.dtx} for the original code).
+% These macros are also provided by the \Lpack{ccaption} package.
+%    \begin{macrocode}
+\providecommand{\@cfttocstart}{%
+  \if@cfthaschapter
+    \if@twocolumn
+      \@restonecoltrue\onecolumn
+    \else
+      \@restonecolfalse
+    \fi
+  \fi}
+%    \end{macrocode}
+% |\@cfttocfinish| resets, if required, twocolumn typesetting.
+%    \begin{macrocode}
+\providecommand{\@cfttocfinish}{%
+  \if@cfthaschapter
+    \if@restonecol\twocolumn\fi
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\phantomsection}
+% This is provided because the \Lopt{hyperref} package screws with 
+% |\addcontentsline|.
+% \changes{v2.2}{2001/04/17}{Provided \cs{phantomsection}}
+% \changes{v2.2}{2001/04/17}{Added \cs{phantomsection} before \cs{addcontentsline} commands}
+%    \begin{macrocode}
+\providecommand{\phantomsection}{}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftdobibtoc}
+% If the \Lpack{tocbibind} package has been used and it has 
+% redefined |\tableofcontents| we need to cater for that. The contents
+% of the definition are defined in \Lpack{tocbibind}.
+%    \begin{macrocode}
+\newcommand{\@cftdobibtoc}{%
+  \if@dotoctoc
+    \if@bibchapter
+      \phantomsection
+      \addcontentsline{toc}{chapter}{\contentsname}
+    \else
+      \phantomsection
+      \addcontentsline{toc}{\@tocextra}{\contentsname}
+    \fi
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftparskip}
+% The |\parskip| local to the ToC, etc., is set to the length |\cftparskip|.
+% \changes{v2.1}{2001/04/08}{Added \cs{cftparskip} for local parskip in ToC, etc}
+%    \begin{macrocode}
+\newlength{\cftparskip}
+\setlength{\cftparskip}{0pt}
+
+%    \end{macrocode}
+% \end{macro}
+% 
+%
+% \begin{macro}{\tableofcontents}
+% This is a parameterised version of the default |\tableofcontents| command.
+% Each class has its own definition, but we have to cater for all classes
+% in one definition, hence some of the checks. The definition is
+% modified after all packages have been loaded.
+%
+% If the \Lopt{titles} option has been used, then the command is not modified.
+%
+%    \begin{macrocode}
+\AtBeginDocument{%
+\if@cftnctoc\else
+  \renewcommand{\tableofcontents}{%
+    \@cfttocstart
+%    \end{macrocode}
+% Ensure that any previous paragraph has been finished. Within a group set
+% the local paragraphing style and typeset the title.
+%    \begin{macrocode}
+    \par
+    \begingroup
+      \parindent\z@ \parskip\cftparskip
+      \@cftmaketoctitle
+%    \end{macrocode}
+% If \Lpack{tocbibind} has been used, then add the ToC 
+% name to the ToC.
+%    \begin{macrocode}
+      \if@cfttocbibind
+        \@cftdobibtoc
+      \fi
+%    \end{macrocode}
+% Finally, read the \file{.toc} file and finish up.
+%    \begin{macrocode}
+      \@starttoc{toc}%
+    \endgroup
+    \@cfttocfinish}
+\fi
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftmaketoctitle}
+% This command typesets the title for the ToC.
+% \changes{v2.3}{2002/06/15}{Added \cs{@secpenalty} to \cs{@cftmaketoctitle}}
+% \changes{v2.3}{2002/06/15}{Added \cs{@cftpagestyle} to \cs{@cftmaketoctitle}}
+%    \begin{macrocode}
+\newcommand{\@cftmaketoctitle}{%
+  \addpenalty\@secpenalty
+  \if@cfthaschapter
+    \vspace*{\cftbeforetoctitleskip}
+  \else
+    \vspace{\cftbeforetoctitleskip}
+  \fi
+  \@cftpagestyle
+  {\interlinepenalty\@M
+  {\cfttoctitlefont\contentsname}{\cftaftertoctitle}
+  \cftmarktoc
+  \par\nobreak
+  \vskip \cftaftertoctitleskip
+  \@afterheading}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforetoctitleskip}
+% \begin{macro}{\cftaftertoctitleskip}
+%  These two lengths control the vertical spacing before and after the 
+%  ToC title.
+%    \begin{macrocode}
+\newlength{\cftbeforetoctitleskip}
+\newlength{\cftaftertoctitleskip}
+%    \end{macrocode}
+% Their values depend on whether the document has chapters or not. In
+% chaptered documents the default ToC title is typeset as a |\chapter*|,
+% otherwise as a |\section*|.
+%    \begin{macrocode}
+\if@cfthaschapter
+  \setlength{\cftbeforetoctitleskip}{50pt}
+  \setlength{\cftaftertoctitleskip}{40pt}
+\else
+  \setlength{\cftbeforetoctitleskip}{3.5ex \@plus 1ex \@minus .2ex}
+  \setlength{\cftaftertoctitleskip}{2.3ex \@plus.2ex}
+\fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cfttoctitlefont}
+% \begin{macro}{\cftaftertoctitle}
+% The ToC title is typeset in the style given by |\cfttoctitlefont|.
+% The macro |\cftaftertoctitle| is called after typesetting the title.
+% This is initialised to do nothing.
+% Both these macros can be redefined to do other things (e.g., adding
+% an |\hfill| to |\cfttoctitlefont| will make the title flushright).
+% \changes{v2.3}{2002/06/15}{koma changes the title fonts}
+%    \begin{macrocode}
+\if@cfthaschapter
+  \newcommand{\cfttoctitlefont}{\normalfont\Huge\bfseries}
+  \if@cftkoma\renewcommand{\cfttoctitlefont}{\size@chapter\sectfont}\fi
+\else
+  \newcommand{\cfttoctitlefont}{\normalfont\Large\bfseries}
+  \if@cftkoma\renewcommand{\cfttoctitlefont}{\size@section\sectfont}\fi
+\fi
+\newcommand{\cftaftertoctitle}{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftsetpnumwidth}
+% \begin{macro}{\cftsetrmarg}
+%  Users commands for setting |\@pnumwidth| and |\@tocrmarg|.
+%    \begin{macrocode}
+\newcommand{\cftsetpnumwidth}[1]{\renewcommand{\@pnumwidth}{#1}}
+\newcommand{\cftsetrmarg}[1]{\renewcommand{\@tocrmarg}{#1}}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftdot}
+% \begin{macro}{\cftdotfill}
+% In the default ToC, a dotted line can be used to provide a leader between
+% a title and the page number. The definition of this leader is buried
+% in the |\@dottedtocline| command. The |\cftdotfill{|\meta{sep}|}|
+% command provides a parameterised version of the leader code, where
+% \meta{sep} is the seperation between the dots in mu units.
+% The symbol used for the `dots' in the leader is given by the value
+% of |\cftdot|. These macros are also provided by the \Lpack{ccaption} package.
+%    \begin{macrocode}
+\providecommand{\cftdot}{.}
+\providecommand{\cftdotfill}[1]{%
+  \leaders\hbox{$\m@th\mkern #1 mu\hbox{\cftdot}\mkern #1 mu$}\hfill}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftdotsep}
+% \begin{macro}{\cftnodots}
+% |\cftdotsep| holds the default dot seperation, and is also provided
+% by the \Lpack{ccaption} package.
+% If the kerns in |\cftdotfill| are large enough, then no dots will
+% be printed. |\cftnodots| should be `large enough'.
+%    \begin{macrocode}
+\providecommand{\cftdotsep}{4.5}
+\newcommand{\cftnodots}{10000}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%     Now for the trickier bits regarding the typesetting of the ToC
+% entries.
+%
+%     A \file{.toc} (also \file{.lof} and \file{.lot}) file consists
+% of a list of 
+% |\contentsline{|\meta{kind}|}{|\meta{title}|}{|\meta{page}|}|
+% commands, where \meta{kind} is the kind of heading (e.g., |part| or
+% |section| or |figure|), \meta{title} is the title text (including the number),
+% and \meta{page} is the page number. The entries are inserted into the
+% file by calling the 
+% |\addcontentsline{|\meta{file}|}{|\meta{kind}|}{|\meta{title}|}|
+% command, where \meta{file} is the file extension (e.g., |toc|, |lot|)
+% and the other arguments are the same as for the |\contentsline|
+% command. (Arbitrary stuff may also be put into the file via the
+% |\addtocontents{|\meta{file}|}{|\meta{text}|}| command).
+% The typesetting of the |\contentsline| entries is performed by 
+% commands of the form |\l@kind|. The sectioning and captioning commands
+% call |\addcontentsline| to insert their titles into the \file{.toc}
+% etc., files.
+%
+%     For the purposes at hand it is generally impossible to treat 
+% the typesetting
+% of a title and its number seperately, as both are bundled into the
+% \meta{title} argument within |\contentsline|. They could be handled
+% seperately if the |\contentsline| command was suitably modified. If
+% this was done, then the |\addtocontentsline| command would also need
+% to be changed which would then require the sectioning and captioning
+% commands to be modified as well. This is certainly possible, but would
+% cause problems if any other package also modified the sectioning or
+% captioning commands, and there are several packages which do this.
+%
+%     Having said this, for all but Part entries, the sectional number
+% is typeset via the |\numberline| command. We can take advantage of
+% this fact.
+%
+%     I have taken the decision to not touch the |\contentsline| macro
+% and instead to do what can be done with it as it exists. That is, I will
+% modify the |\l@kind| commands. Essentially, my new definitions
+% consist of inlined versions of the code for |\@dottedtocline|.
+%
+% \begin{macro}{\cftparfillskip}
+% The |\l@kind| commands modify (locally) the value of |\parfillskip|.
+% |\cftparfillskip| is a copy of the default \textit{\TeX book}
+% |\parfillskip| definition.
+%    \begin{macrocode}
+\newcommand{\cftparfillskip}{\parfillskip=0pt plus1fil}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\numberline}
+% \changes{v1.1}{2000/02/11}{Added \cs{@cftbsnum} to \cs{numberline}}
+% The purpose of the |\numberline{|\meta{secnum}|}| command is to typeset
+% \meta{secnum} left justified in a box of width |\@tempdima|. I redefine
+% it to add three additional parameters, namely |\@cftbsnum|, 
+% |\@cftasnum| and |\@cftasnumb| 
+% (see \file{ltsect.dtx} for the original
+% definition).
+%    \begin{macrocode}
+\renewcommand{\numberline}[1]{% 
+  \hb@xt@\@tempdima{\@cftbsnum #1\@cftasnum\hfil}\@cftasnumb}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftbsnum}
+% \begin{macro}{\@cftasnum}
+% \begin{macro}{\@cftasnumb}
+% \changes{v0.2b}{1999/03/07}{Added empty definitions for @cftasnum and @cftasnumb commands}
+% \changes{v1.1}{2000/02/11}{Added empty definition of \cs{@cftbsnum}}
+% Originally these were not defined but were |\let| to appropriate commands
+% in the |\l@...| commands, but they
+% have to be defined in case something unexpected calls |\numberline|,
+% for example through use of the \Lpack{float} package.\footnote{This bug
+% was discovered by Andrew Thurber when using the \Lpack{tocloft} and
+% \Lpack{algorithm} packages together.}
+%    \begin{macrocode}
+\newcommand{\@cftbsnum}{}
+\newcommand{\@cftasnum}{}
+\newcommand{\@cftasnumb}{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% 
+% 
+%
+% \begin{macro}{\l@part}
+% \begin{macro}{\if@cftdopart}
+% \changes{v1.1}{2000/02/11}{Added \cs{@cftbsnum} and \cs{cftXpresnum} to
+%                            all \cs{\l@X} commands}
+% \changes{v1.1}{2000/02/11}{Added \cs{cftXpresnum} commands}
+%  |\l@part{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |part| heading. It is a parameterised copy of the default |\l@part|
+% (see \file{classes.dtx} for the original definition and the code
+%  below for |\l@subsection| for an explanation of most of this
+%  code). By default, Parts
+% (and Chapters) do not have dotted leaders. This package provides
+% for all entries to have dotted leaders.
+% \changes{v0.2a}{1999/01/24}{In article class, Part level is 0 not -1}
+% \changes{v2.0}{2001/03/03}{Checked directly for \cs{part} definition}
+% \changes{v2.3a}{2002/10/03}{Added \cs{cftpartpresnum} to \cs{l@part}}
+% 
+%    \begin{macrocode}
+\newif\if@cftdopart
+\newif\if@cfthaspart
+\@ifundefined{part}{\@cfthaspartfalse}{\@cfthasparttrue}
+\if@cfthaspart
+\renewcommand*{\l@part}[2]{%
+  \@cftdopartfalse
+  \ifnum \c@tocdepth >-2\relax
+    \if@cfthaschapter
+      \@cftdoparttrue
+    \fi
+    \ifnum \c@tocdepth >\m@ne
+      \if@cfthaschapter\else
+        \@cftdoparttrue
+      \fi
+    \fi
+  \fi
+  \if@cftdopart
+    \if@cfthaschapter
+      \addpenalty{-\@highpenalty}%
+    \else
+      \addpenalty\@secpenalty
+    \fi
+    \addvspace{\cftbeforepartskip}%
+    \begingroup
+      {\leftskip \cftpartindent\relax
+       \rightskip \@tocrmarg
+       \parfillskip -\rightskip
+       \parindent \cftpartindent\relax\@afterindenttrue
+       \interlinepenalty\@M
+       \leavevmode    
+       \@tempdima \cftpartnumwidth\relax
+       \let\@cftbsnum \cftpartpresnum
+       \let\@cftasnum \cftpartaftersnum
+       \let\@cftasnumb \cftpartaftersnumb
+       \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+       {\cftpartfont \cftpartpresnum #1}%
+       \cftpartfillnum{#2}}
+      \nobreak
+      \if@cfthaschapter
+        \global\@nobreaktrue
+        \everypar{\global\@nobreakfalse\everypar{}}%
+      \else
+        \if@compatibility
+          \global\@nobreaktrue
+          \everypar{\global\@nobreakfalse\everypar{}}%
+        \fi
+      \fi
+    \endgroup
+  \fi}
+\fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforepartskip}
+% \begin{macro}{\cftpartnumwidth}
+% \begin{macro}{\cftpartfont}
+% \begin{macro}{\cftpartpresnum}
+% \begin{macro}{\cftpartaftersnum}
+% \begin{macro}{\cftpartaftersnumb}
+% \begin{macro}{\cftpartleader}
+% \begin{macro}{\cftpartdotsep}
+% \begin{macro}{\cftpartpagefont}
+% \begin{macro}{\cftpartafterpnum}
+% \begin{macro}{\cftpartindent}
+% \begin{macro}{\cftpartfillnum}
+%  These are the user commands to control the typesetting of Part entries.
+%  They are initialised to give the standard appearance.
+% \changes{v2.3a}{2002/10/03}{Deleted \cs{cftpartaftersnum} and \cs{cftpartaftersnumb}}
+% \changes{v2.3b}{2003/01/20}{Reinstated \cs{cftpartaftersnum} and \cs{cftpartaftersnumb}}
+%    \begin{macrocode}
+\if@cfthaspart
+  \newlength{\cftbeforepartskip}
+    \setlength{\cftbeforepartskip}{2.25em \@plus\p@}
+  \newlength{\cftpartnumwidth}
+    \setlength{\cftpartnumwidth}{0em}
+  \newcommand{\cftpartfont}{\large\bfseries}
+  \newcommand{\cftpartpresnum}{}
+  \newcommand{\cftpartaftersnum}{}
+  \newcommand{\cftpartaftersnumb}{}
+  \newcommand{\cftpartleader}{\large\bfseries\cftdotfill{\cftpartdotsep}}
+  \newcommand{\cftpartdotsep}{\cftnodots}
+  \newcommand{\cftpartpagefont}{\large\bfseries}
+  \newcommand{\cftpartafterpnum}{}
+  \newlength{\cftpartindent}
+    \setlength{\cftpartindent}{0em}
+  \newcommand{\cftpartfillnum}[1]{%
+    {\cftpartleader}%
+    {\hb@xt@\@pnumwidth{\hss {\cftpartpagefont #1}}}\cftpartafterpnum\par}
+%    \end{macrocode}
+% \Lpack{koma} classes use some different settings.
+% \changes{v2.3}{2002/06/15}{koma has different part settings}
+%    \begin{macrocode}
+  \if@cftkoma
+    \setlength{\cftpartnumwidth}{2em}
+    \renewcommand{\cftpartfont}{\sectfont\large}
+    \renewcommand{\cftpartpagefont}{\sectfont\large}
+  \fi
+\fi
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@chapter}
+%  |\l@chapter{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |chapter| heading. It is a parameterised copy of the default |\l@chapter|
+% (see \file{classes.dtx} for the original definition). This only applies
+% to chaptered documents.
+%    \begin{macrocode}
+\if@cfthaschapter
+\renewcommand*{\l@chapter}[2]{%
+  \ifnum \c@tocdepth >\m@ne
+    \addpenalty{-\@highpenalty}%
+    \vskip \cftbeforechapskip
+    {\leftskip \cftchapindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftchapindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftchapnumwidth\relax
+     \let\@cftbsnum \cftchappresnum
+     \let\@cftasnum \cftchapaftersnum
+     \let\@cftasnumb \cftchapaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftchapfont #1}\nobreak
+     \cftchapfillnum{#2}}
+  \fi}
+\fi
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforechapskip}
+% \begin{macro}{\cftchapindent}
+% \begin{macro}{\cftchapnumwidth}
+% \begin{macro}{\cftchapfont}
+% \begin{macro}{\cftchappresnum}
+% \begin{macro}{\cftchapaftersnum}
+% \begin{macro}{\cftchapaftersnumb}
+% \begin{macro}{\cftchapleader}
+% \begin{macro}{\cftchapdotsep}
+% \begin{macro}{\cftchappagefont}
+% \begin{macro}{\cftchapafterpnum}
+% \begin{macro}{\cftchapfillnum}
+%  These are the user commands to control the typesetting of Chapter entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\if@cfthaschapter
+  \newlength{\cftbeforechapskip}
+    \setlength{\cftbeforechapskip}{1.0em \@plus\p@}
+  \newlength{\cftchapindent}
+    \setlength{\cftchapindent}{0em}
+  \newlength{\cftchapnumwidth}
+    \setlength{\cftchapnumwidth}{1.5em}
+  \newcommand{\cftchapfont}{\bfseries}
+  \newcommand{\cftchappresnum}{}
+  \newcommand{\cftchapaftersnum}{}
+  \newcommand{\cftchapaftersnumb}{}
+  \newcommand{\cftchapleader}{\bfseries\cftdotfill{\cftchapdotsep}}
+  \newcommand{\cftchapdotsep}{\cftnodots}
+  \newcommand{\cftchappagefont}{\bfseries}
+  \newcommand{\cftchapafterpnum}{}
+  \newcommand{\cftchapfillnum}[1]{
+    {\cftchapleader}\nobreak
+    \hb@xt@\@pnumwidth{\hfil\cftchappagefont #1}\cftchapafterpnum\par}
+%    \end{macrocode}
+% \Lpack{koma} classes have different chapter settings.
+% \changes{v2.3}{2002/06/15}{koma has different chapter settings}
+%    \begin{macrocode}
+  \if@cftkoma
+    \renewcommand{\cftchapfont}{\sectfont}
+  \fi
+\fi
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@section}
+%  |\l@section{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |section| heading. It is a parameterised copy of the default |\l@section|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@section}[2]{%
+  \ifnum \c@tocdepth >\z@
+    \if@cfthaschapter
+      \vskip \cftbeforesecskip
+    \else
+      \addpenalty\@secpenalty
+      \addvspace{\cftbeforesecskip}
+    \fi
+    {\leftskip \cftsecindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftsecindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftsecnumwidth\relax
+     \let\@cftbsnum \cftsecpresnum
+     \let\@cftasnum \cftsecaftersnum
+     \let\@cftasnumb \cftsecaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftsecfont #1}\nobreak
+     \cftsecfillnum{#2}}
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforesecskip}
+% \begin{macro}{\cftsecindent}
+% \begin{macro}{\cftsecnumwidth}
+% \begin{macro}{\cftsecfont}
+% \begin{macro}{\cftsecpresnum}
+% \begin{macro}{\cftsecaftersnum}
+% \begin{macro}{\cftsecaftersnumb}
+% \begin{macro}{\cftsecleader}
+% \begin{macro}{\cftsecdotsep}
+% \begin{macro}{\cftsecpagefont}
+% \begin{macro}{\cftsecafterpnum}
+% \begin{macro}{\cftsecfillnum}
+%  These are the user commands to control the typesetting of Section entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforesecskip}
+\newlength{\cftsecindent}
+\newlength{\cftsecnumwidth}
+\newcommand{\cftsecpresnum}{}
+\newcommand{\cftsecaftersnum}{}
+\newcommand{\cftsecaftersnumb}{}
+\if@cfthaschapter
+  \setlength{\cftbeforesecskip}{\z@ \@plus.2\p@}
+  \setlength{\cftsecindent}{1.5em}
+  \setlength{\cftsecnumwidth}{2.3em}
+  \newcommand{\cftsecfont}{\normalfont}
+  \newcommand{\cftsecleader}{\normalfont\cftdotfill{\cftsecdotsep}}
+  \newcommand{\cftsecdotsep}{\cftdotsep}
+  \newcommand{\cftsecpagefont}{\normalfont}
+\else
+  \setlength{\cftbeforesecskip}{1.0em \@plus\p@}
+  \setlength{\cftsecindent}{0em}
+  \setlength{\cftsecnumwidth}{1.5em}
+  \newcommand{\cftsecfont}{\bfseries}
+  \newcommand{\cftsecleader}{\bfseries\cftdotfill{\cftsecdotsep}}
+  \newcommand{\cftsecdotsep}{\cftnodots}
+  \newcommand{\cftsecpagefont}{\bfseries}
+\fi
+\newcommand{\cftsecafterpnum}{}
+\newcommand{\cftsecfillnum}[1]{%
+  {\cftsecleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsecpagefont #1}\cftsecafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@subsection}
+%  |\l@subsection{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |subsection| heading. It is a parameterised copy of the default 
+% |\l@subsection|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@subsection}[2]{%
+%    \end{macrocode}
+% Only typeset the entry if it falls within the |tocdepth|.
+%    \begin{macrocode}
+  \ifnum \c@tocdepth >\@ne
+%    \end{macrocode}
+% Add some vertical space.
+%    \begin{macrocode}
+    \vskip \cftbeforesubsecskip
+%    \end{macrocode}
+% Start a group to keep paragraphing changes local. Set the |\leftskip|
+% to the entry's indentation.
+%    \begin{macrocode}
+    {\leftskip \cftsubsecindent\relax
+%    \end{macrocode}
+% Set the |\rightskip| to |\@tocrmarg| to leave room for the page number.
+%    \begin{macrocode}
+     \rightskip \@tocrmarg
+%    \end{macrocode}
+% Ensure that the last line of the entry will be filled. Setting 
+% |\parfillskip| to a negative number prevents any overfull box messages.
+%    \begin{macrocode}
+     \parfillskip -\rightskip
+%    \end{macrocode}
+% Set the paragraph indent to the entry's indentation.
+%    \begin{macrocode}
+     \parindent \cftsubsecindent\relax\@afterindenttrue
+%    \end{macrocode}
+% Try and prevent breaks between lines in a multiple line entry.
+%    \begin{macrocode}
+     \interlinepenalty\@M
+%    \end{macrocode}
+% Make sure that we have left vertical mode.
+%    \begin{macrocode}
+     \leavevmode
+%    \end{macrocode}
+% Our version of |\numberline| expects that the width of the number box
+% is in |\@tempdima|, and that the three macros |\@cftbsnum|, 
+% |\@cftasnum| and |\@cftasnumb|
+% are defined. We set all these to the values for this entry.
+%    \begin{macrocode}
+     \@tempdima \cftsubsecnumwidth\relax
+     \let\@cftbsnum \cftsubsecpresnum
+     \let\@cftasnum \cftsubsecaftersnum
+     \let\@cftasnumb \cftsubsecaftersnumb
+%    \end{macrocode}
+% Arrange that the (section number and) first line of the title is set
+% at the current indent, and any further lines are further indented.
+%    \begin{macrocode}
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+%    \end{macrocode}
+% Print the (number and) title, prohibiting any breaking.
+%    \begin{macrocode}
+     {\cftsubsecfont #1}\nobreak
+%    \end{macrocode}
+% Print the leader and the page number, and close the group.
+%    \begin{macrocode}
+     \cftsubsecfillnum{#2}}
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforesubsecskip}
+% \begin{macro}{\cftsubsecindent}
+% \begin{macro}{\cftsubsecnumwidth}
+% \begin{macro}{\cftsubsecfont}
+% \begin{macro}{\cftsubsecpresnum}
+% \begin{macro}{\cftsubsecaftersnum}
+% \begin{macro}{\cftsubsecaftersnumb}
+% \begin{macro}{\cftsubsecleader}
+% \begin{macro}{\cftsubsecdotsep}
+% \begin{macro}{\cftsubsecpagefont}
+% \begin{macro}{\cftsubsecafterpnum}
+%  These are the user commands to control the typesetting of Sub-section entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforesubsecskip}
+  \setlength{\cftbeforesubsecskip}{\z@ \@plus.2\p@}
+\newlength{\cftsubsecindent}
+\newlength{\cftsubsecnumwidth}
+\if@cfthaschapter
+  \setlength{\cftsubsecindent}{3.8em}
+  \setlength{\cftsubsecnumwidth}{3.2em}
+\else
+  \setlength{\cftsubsecindent}{1.5em}
+  \setlength{\cftsubsecnumwidth}{2.3em}
+\fi
+\newcommand{\cftsubsecfont}{\normalfont}
+\newcommand{\cftsubsecpresnum}{}
+\newcommand{\cftsubsecaftersnum}{}
+\newcommand{\cftsubsecaftersnumb}{}
+\newcommand{\cftsubsecleader}{\normalfont\cftdotfill{\cftsubsecdotsep}}
+\newcommand{\cftsubsecdotsep}{\cftdotsep}
+\newcommand{\cftsubsecpagefont}{\normalfont}
+\newcommand{\cftsubsecafterpnum}{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftsubsecfillnum}
+% |\cftsubsecfillnum{|\meta{page}|}| typesets the leader and the \meta{page}
+% number of a |subsection| entry.
+% First print the leader and then, with no break, set the page number
+% flushright in  a box of width |\@pnumwidth|,
+% not forgetting to finish the paragraph.
+%    \begin{macrocode}
+\newcommand{\cftsubsecfillnum}[1]{%
+  {\cftsubsecleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsubsecpagefont #1}\cftsubsecafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\l@subsubsection}
+%  |\l@subsubsection{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |subsubsection| heading. It is a parameterised copy of the default 
+% |\l@subsubsection|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@subsubsection}[2]{%
+  \ifnum \c@tocdepth >\tw@
+    \vskip \cftbeforesubsubsecskip
+    {\leftskip \cftsubsubsecindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftsubsubsecindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftsubsubsecnumwidth\relax
+     \let\@cftbsnum \cftsubsubsecpresnum
+     \let\@cftasnum \cftsubsubsecaftersnum
+     \let\@cftasnumb \cftsubsubsecaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftsubsubsecfont #1}\nobreak
+     \cftsubsubsecfillnum{#2}}
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforesubsubsecskip}
+% \begin{macro}{\cftsubsubsecindent}
+% \begin{macro}{\cftsubsubsecnumwidth}
+% \begin{macro}{\cftsubsubsecfont}
+% \begin{macro}{\cftsubsubsecpresnum}
+% \begin{macro}{\cftsubsubsecaftersnum}
+% \begin{macro}{\cftsubsubsecaftersnumb}
+% \begin{macro}{\cftsubsubsecleader}
+% \begin{macro}{\cftsubsubsecdotsep}
+% \begin{macro}{\cftsubsubsecpagefont}
+% \begin{macro}{\cftsubsubsecafterpnum}
+% \begin{macro}{\cftsubsubsecfillnum}
+%  These are the user commands to control the typesetting of Sub-sub-section entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforesubsubsecskip}
+  \setlength{\cftbeforesubsubsecskip}{\z@ \@plus.2\p@}
+\newlength{\cftsubsubsecindent}
+\newlength{\cftsubsubsecnumwidth}
+\if@cfthaschapter
+  \setlength{\cftsubsubsecindent}{7.0em}
+  \setlength{\cftsubsubsecnumwidth}{4.1em}
+\else
+  \setlength{\cftsubsubsecindent}{3.8em}
+  \setlength{\cftsubsubsecnumwidth}{3.2em}
+\fi
+\newcommand{\cftsubsubsecfont}{\normalfont}
+\newcommand{\cftsubsubsecpresnum}{}
+\newcommand{\cftsubsubsecaftersnum}{}
+\newcommand{\cftsubsubsecaftersnumb}{}
+\newcommand{\cftsubsubsecleader}{\normalfont\cftdotfill{\cftsubsubsecdotsep}}
+\newcommand{\cftsubsubsecdotsep}{\cftdotsep}
+\newcommand{\cftsubsubsecpagefont}{\normalfont}
+\newcommand{\cftsubsubsecafterpnum}{}
+\newcommand{\cftsubsubsecfillnum}[1]{%
+  {\cftsubsubsecleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsubsubsecpagefont #1}\cftsubsubsecafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@paragraph}
+%  |\l@paragraph{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |paragraph| heading. It is a parameterised copy of the default 
+% |\l@paragraph|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@paragraph}[2]{%
+  \ifnum \c@tocdepth >3\relax
+    \vskip \cftbeforeparaskip
+    {\leftskip \cftparaindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftparaindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftparanumwidth\relax
+     \let\@cftbsnum \cftparapresnum
+     \let\@cftasnum \cftparaaftersnum
+     \let\@cftasnumb \cftparaaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftparafont #1}\nobreak
+     \cftparafillnum{#2}}
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforeparaskip}
+% \begin{macro}{\cftparaindent}
+% \begin{macro}{\cftparanumwidth}
+% \begin{macro}{\cftparafont}
+% \begin{macro}{\cftparapresnum}
+% \begin{macro}{\cftparaaftersnum}
+% \begin{macro}{\cftparaaftersnumb}
+% \begin{macro}{\cftparaleader}
+% \begin{macro}{\cftparadotsep}
+% \begin{macro}{\cftparapagefont}
+% \begin{macro}{\cftparaafterpnum}
+% \begin{macro}{\cftparafillnum}
+%  These are the user commands to control the typesetting of Paragraph entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforeparaskip}
+  \setlength{\cftbeforeparaskip}{\z@ \@plus.2\p@}
+\newlength{\cftparaindent}
+\newlength{\cftparanumwidth}
+\if@cfthaschapter
+  \setlength{\cftparaindent}{10em}
+  \setlength{\cftparanumwidth}{5em}
+\else
+  \setlength{\cftparaindent}{7.0em}
+  \setlength{\cftparanumwidth}{4.1em}
+\fi
+\newcommand{\cftparafont}{\normalfont}
+\newcommand{\cftparapresnum}{}
+\newcommand{\cftparaaftersnum}{}
+\newcommand{\cftparaaftersnumb}{}
+\newcommand{\cftparaleader}{\normalfont\cftdotfill{\cftparadotsep}}
+\newcommand{\cftparadotsep}{\cftdotsep}
+\newcommand{\cftparapagefont}{\normalfont}
+\newcommand{\cftparaafterpnum}{}
+\newcommand{\cftparafillnum}[1]{%
+  {\cftparaleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftparapagefont #1}\cftparaafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@subparagraph}
+%  |\l@subparagraph{|\meta{title}|}{|\meta{page}|}| typesets the ToC entry for
+% a |subparagraph| heading. It is a parameterised copy of the default 
+% |\l@subparagraph|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@subparagraph}[2]{%
+  \ifnum \c@tocdepth >4\relax
+    \vskip \cftbeforesubparaskip
+    {\leftskip \cftsubparaindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftsubparaindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftsubparanumwidth\relax
+     \let\@cftbsnum \cftsubparapresnum
+     \let\@cftasnum \cftsubparaaftersnum
+     \let\@cftasnumb \cftsubparaaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftsubparafont #1}\nobreak
+     \cftsubparafillnum{#2}}
+  \fi}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforesubparaskip}
+% \begin{macro}{\cftsubparaindent}
+% \begin{macro}{\cftsubparanumwidth}
+% \begin{macro}{\cftsubparafont}
+% \begin{macro}{\cftsubparapresnum}
+% \begin{macro}{\cftsubparaaftersnum}
+% \begin{macro}{\cftsubparaaftersnumb}
+% \begin{macro}{\cftsubparaleader}
+% \begin{macro}{\cftsubparadotsep}
+% \begin{macro}{\cftsubparapagefont}
+% \begin{macro}{\cftsubparaafterpnum}
+% \begin{macro}{\cftsubparafillnum}
+%  These are the user commands to control the typesetting of Sub-paragraph entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforesubparaskip}
+  \setlength{\cftbeforesubparaskip}{\z@ \@plus.2\p@}
+\newlength{\cftsubparaindent}
+\newlength{\cftsubparanumwidth}
+\if@cfthaschapter
+  \setlength{\cftsubparaindent}{12em}
+  \setlength{\cftsubparanumwidth}{6em}
+\else
+  \setlength{\cftsubparaindent}{10em}
+  \setlength{\cftsubparanumwidth}{5em}
+\fi
+\newcommand{\cftsubparafont}{\normalfont}
+\newcommand{\cftsubparapresnum}{}
+\newcommand{\cftsubparaaftersnum}{}
+\newcommand{\cftsubparaaftersnumb}{}
+\newcommand{\cftsubparaleader}{\normalfont\cftdotfill{\cftsubparadotsep}}
+\newcommand{\cftsubparadotsep}{\cftdotsep}
+\newcommand{\cftsubparapagefont}{\normalfont}
+\newcommand{\cftsubparaafterpnum}{}
+\newcommand{\cftsubparafillnum}[1]{%
+  {\cftsubparaleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsubparapagefont #1}\cftsubparaafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\@cftdobiblof}
+% If the \Lpack{tocbibind} package has been used and it has 
+% redefined |\listoffigures| we need to cater for that. The contents
+% of the definition are defined in \Lpack{tocbibind}.
+%    \begin{macrocode}
+\newcommand{\@cftdobiblof}{%
+  \if@dotoclof
+    \if@bibchapter
+      \phantomsection
+      \addcontentsline{toc}{chapter}{\listfigurename}
+    \else
+      \phantomsection
+      \addcontentsline{toc}{\@tocextra}{\listfigurename}
+    \fi
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\listoffigures}
+% This is a parameterised version of the default |\listoffigures| command.
+% The changes are postponed until after all packages have been loaded.
+% Each class has its own definition, but we have to cater for all classes
+% in one definition, hence some of the checks. First, perform the default
+% checks for multicolumns. (Do nothing if \Lopt{titles} option is used).
+%    \begin{macrocode}
+\AtBeginDocument{
+\if@cftnctoc\else
+\renewcommand{\listoffigures}{%
+  \@cfttocstart
+%    \end{macrocode}
+% Ensure that any previous paragraph has been finished. Within a group set
+% the local paragraphing style. Typeset the title and then do the contents
+% of the \file{.lof} file.
+%    \begin{macrocode}
+  \par
+  \begingroup
+    \parindent\z@ \parskip\cftparskip
+    \@cftmakeloftitle
+    \if@cfttocbibind
+      \@cftdobiblof
+    \fi
+    \@starttoc{lof}%
+  \endgroup
+%    \end{macrocode}
+% Finally, restore any multicolumn typesetting.
+%    \begin{macrocode}
+  \@cfttocfinish}
+\fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftmakeloftitle}
+% This command typesets the title for the LoF.
+% \changes{v2.3}{2002/06/15}{Added \cs{@secpenalty} to \cs{cftmakeloftitle}}
+% \changes{v2.3}{2002/06/15}{Added \cs{@cftpagestyle} to \cs{cftmakeloftitle}}
+%    \begin{macrocode}
+\newcommand{\@cftmakeloftitle}{%
+  \addpenalty\@secpenalty
+  \if@cfthaschapter
+    \vspace*{\cftbeforeloftitleskip}
+  \else
+    \vspace{\cftbeforeloftitleskip}
+  \fi
+  \@cftpagestyle
+  {\interlinepenalty\@M
+  {\cftloftitlefont\listfigurename}{\cftafterloftitle}
+  \cftmarklof
+  \par\nobreak
+  \vskip \cftafterloftitleskip
+  \@afterheading}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforeloftitleskip}
+% \begin{macro}{\cftafterloftitleskip}
+%  These two lengths control the vertical spacing before and after the 
+%  LoF title.
+%    \begin{macrocode}
+\newlength{\cftbeforeloftitleskip}
+\newlength{\cftafterloftitleskip}
+%    \end{macrocode}
+% Their values depend on whether the document has chapters or not. In
+% chaptered documents the default LoF title is typeset as a |\chapter*|,
+% otherwise as a |\section*|.
+%    \begin{macrocode}
+\if@cfthaschapter
+  \setlength{\cftbeforeloftitleskip}{50pt}
+  \setlength{\cftafterloftitleskip}{40pt}
+\else
+  \setlength{\cftbeforeloftitleskip}{3.5ex \@plus 1ex \@minus .2ex}
+  \setlength{\cftafterloftitleskip}{2.3ex \@plus.2ex}
+\fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftloftitlefont}
+% \begin{macro}{\cftafterloftitle}
+% The LoF title is typeset in the style given by |\cftloftitlefont|.
+% The macro |\cftafterloftitle| is called after typesetting the title.
+% This is initialised to do nothing.
+% Both these macros can be redefined to do other things (e.g., adding
+% an |\hfill| to |\cftloftitlefont| will make the title flushright).
+% \changes{v2.3}{2002/06/15}{koma has different settings for LoF titles}
+%    \begin{macrocode}
+\if@cfthaschapter
+  \newcommand{\cftloftitlefont}{\normalfont\Huge\bfseries}
+  \if@cftkoma\renewcommand{\cftloftitlefont}{\size@chapter\sectfont}\fi
+\else
+  \newcommand{\cftloftitlefont}{\normalfont\Large\bfseries}
+  \if@cftkoma\renewcommand{\cftloftitlefont}{\size@section\sectfont}\fi
+\fi
+\newcommand{\cftafterloftitle}{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@figure}
+%  |\l@figure{|\meta{title}|}{|\meta{page}|}| typesets the LoF entry for
+% a |figure| caption heading. It is a parameterised copy of the default 
+% |\l@figure|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@figure}[2]{%
+  \ifnum \c@lofdepth >\z@
+    \vskip \cftbeforefigskip
+    {\leftskip \cftfigindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftfigindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftfignumwidth\relax
+     \let\@cftbsnum \cftfigpresnum
+     \let\@cftasnum \cftfigaftersnum
+     \let\@cftasnumb \cftfigaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftfigfont #1}\nobreak
+     \cftfigfillnum{#2}}
+   \fi
+  }
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforefigskip}
+% \begin{macro}{\cftfigindent}
+% \begin{macro}{\cftfignumwidth}
+% \begin{macro}{\cftfigfont}
+% \begin{macro}{\cftfigpresnum}
+% \begin{macro}{\cftfigaftersnum}
+% \begin{macro}{\cftfigaftersnumb}
+% \begin{macro}{\cftfigleader}
+% \begin{macro}{\cftfigdotsep}
+% \begin{macro}{\cftfigpagefont}
+% \begin{macro}{\cftfigafterpnum}
+% \begin{macro}{\cftfigfillnum}
+%  These are the user commands to control the typesetting of Figure caption entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforefigskip}
+  \setlength{\cftbeforefigskip}{\z@ \@plus.2\p@}
+\newlength{\cftfigindent}
+  \setlength{\cftfigindent}{1.5em}
+\newlength{\cftfignumwidth}
+  \setlength{\cftfignumwidth}{2.3em}
+\newcommand{\cftfigfont}{\normalfont}
+\newcommand{\cftfigpresnum}{}
+\newcommand{\cftfigaftersnum}{}
+\newcommand{\cftfigaftersnumb}{}
+\newcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}}
+\newcommand{\cftfigdotsep}{\cftdotsep}
+\newcommand{\cftfigpagefont}{\normalfont}
+\newcommand{\cftfigafterpnum}{}
+\newcommand{\cftfigfillnum}[1]{%
+  {\cftfigleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftfigpagefont #1}\cftfigafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{lofdepth}
+% \begin{macro}{lotdepth}
+% The counters |lofdepth| and |lotdepth| are defined by the 
+% \Lpack{subfigure} package.
+% Define them here if that package is not used.
+%    \begin{macrocode}
+\if@cftsubfigopt\else
+  \newcounter{lofdepth}\setcounter{lofdepth}{1}
+  \newcounter{lotdepth}\setcounter{lotdepth}{1}
+\fi
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@cftdobiblot}
+% If the \Lpack{tocbibind} package has been used and it has 
+% redefined |\listoftables| we need to cater for that. The contents
+% of the definition are defined in \Lpack{tocbibind}.
+%    \begin{macrocode}
+\newcommand{\@cftdobiblot}{%
+  \if@dotoclot
+    \if@bibchapter
+      \phantomsection
+      \addcontentsline{toc}{chapter}{\listtablename}
+    \else
+      \phantomsection
+      \addcontentsline{toc}{\@tocextra}{\listtablename}
+    \fi
+  \fi}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\listoftables}
+% This is a parameterised version of the default |\listoftables| command.
+% The changes are postponed until after all packages have been loaded.
+% Each class has its own definition, but we have to cater for all classes
+% in one definition, hence some of the checks. First, perform the default
+% checks for multicolumns. (Do nothing if the \Lopt{titles} option has
+%  been used).
+%    \begin{macrocode}
+\AtBeginDocument{
+\if@cftnctoc\else
+\renewcommand{\listoftables}{%
+  \@cfttocstart
+%    \end{macrocode}
+% Ensure that any previous paragraph has been finished. Within a group set
+% the local paragraphing style. Typeset the title and then do the contents
+% of the \file{.lot} file.
+%    \begin{macrocode}
+  \par
+  \begingroup
+    \parindent\z@ \parskip\cftparskip	
+    \@cftmakelottitle
+    \if@cfttocbibind
+      \@cftdobiblot
+    \fi
+    \@starttoc{lot}%
+  \endgroup
+%    \end{macrocode}
+% Finally, restore any multicolumn typesetting.
+%    \begin{macrocode}
+  \@cfttocfinish}
+\fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftmakelottitle}
+% This command typesets the title for the LoT.
+% \changes{v2.3}{2002/06/15}{Added \cs{@secpenalty} to \cs{@cftmakelottitle}}
+% \changes{v2.3}{2002/06/15}{Added \cs{@cftpagestyle} to \cs{@cftmakelottitle}}
+%    \begin{macrocode}
+\newcommand{\@cftmakelottitle}{%
+  \addpenalty\@secpenalty
+  \if@cfthaschapter
+    \vspace*{\cftbeforelottitleskip}
+  \else
+    \vspace{\cftbeforelottitleskip}
+  \fi
+  \@cftpagestyle
+  {\interlinepenalty\@M
+  {\cftlottitlefont\listtablename}{\cftafterlottitle}
+  \cftmarklot
+  \par\nobreak
+  \vskip \cftafterlottitleskip
+  \@afterheading}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforelottitleskip}
+% \begin{macro}{\cftafterlottitleskip}
+%  These two lengths control the vertical spacing before and after the 
+%  LoT title.
+%    \begin{macrocode}
+\newlength{\cftbeforelottitleskip}
+\newlength{\cftafterlottitleskip}
+%    \end{macrocode}
+% Their values depend on whether the document has chapters or not. In
+% chaptered documents the default LoT title is typeset as a |\chapter*|,
+% otherwise as a |\section*|.
+%    \begin{macrocode}
+\if@cfthaschapter
+  \setlength{\cftbeforelottitleskip}{50pt}
+  \setlength{\cftafterlottitleskip}{40pt}
+\else
+  \setlength{\cftbeforelottitleskip}{3.5ex \@plus 1ex \@minus .2ex}
+  \setlength{\cftafterlottitleskip}{2.3ex \@plus.2ex}
+\fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftlottitlefont}
+% \begin{macro}{\cftafterlottitle}
+% The LoT title is typeset in the style given by |\cftlottitlefont|.
+% The macro |\cftafterlottitle| is called after typesetting the title.
+% This is initialised to do nothing.
+% Both these macros can be redefined to do other things (e.g., adding
+% an |\hfill| to |\cftlottitlefont| will make the title flushright).
+% \changes{v2.3}{2002/06/15}{koma has different settings for LoT titles}
+%    \begin{macrocode}
+\if@cfthaschapter
+  \newcommand{\cftlottitlefont}{\normalfont\Huge\bfseries}
+  \if@cftkoma\renewcommand{\cftlottitlefont}{\size@chapter\sectfont}\fi
+\else
+  \newcommand{\cftlottitlefont}{\normalfont\Large\bfseries}
+  \if@cftkoma\renewcommand{\cftlottitlefont}{\size@section\sectfont}\fi
+\fi
+\newcommand{\cftafterlottitle}{}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\l@table}
+%  |\l@table{|\meta{title}|}{|\meta{page}|}| typesets the LoT entry for
+% a |table| caption heading. It is a parameterised copy of the default 
+% |\l@table|
+% (see \file{classes.dtx} for the original definition). 
+%    \begin{macrocode}
+\renewcommand*{\l@table}[2]{%
+  \ifnum\c@lotdepth >\z@
+    \vskip \cftbeforetabskip
+    {\leftskip \cfttabindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cfttabindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cfttabnumwidth\relax
+     \let\@cftbsnum \cfttabpresnum
+     \let\@cftasnum \cfttabaftersnum
+     \let\@cftasnumb \cfttabaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cfttabfont #1}\nobreak
+     \cfttabfillnum{#2}}
+   \fi
+  }
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforetabskip}
+% \begin{macro}{\cfttabindent}
+% \begin{macro}{\cfttabnumwidth}
+% \begin{macro}{\cfttabfont}
+% \begin{macro}{\cfttabpresnum}
+% \begin{macro}{\cfttabaftersnum}
+% \begin{macro}{\cfttabaftersnumb}
+% \begin{macro}{\cfttableader}
+% \begin{macro}{\cfttabdotsep}
+% \begin{macro}{\cfttabpagefont}
+% \begin{macro}{\cfttabafterpnum}
+% \begin{macro}{\cfttabfillnum}
+%  These are the user commands to control the typesetting of Table caption entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforetabskip}
+  \setlength{\cftbeforetabskip}{\z@ \@plus.2\p@}
+\newlength{\cfttabindent}
+  \setlength{\cfttabindent}{1.5em}
+\newlength{\cfttabnumwidth}
+  \setlength{\cfttabnumwidth}{2.3em}
+\newcommand{\cfttabfont}{\normalfont}
+\newcommand{\cfttabpresnum}{}
+\newcommand{\cfttabaftersnum}{}
+\newcommand{\cfttabaftersnumb}{}
+\newcommand{\cfttableader}{\normalfont\cftdotfill{\cfttabdotsep}}
+\newcommand{\cfttabdotsep}{\cftdotsep}
+\newcommand{\cfttabpagefont}{\normalfont}
+\newcommand{\cfttabafterpnum}{}
+\newcommand{\cfttabfillnum}[1]{%
+  {\cfttableader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cfttabpagefont #1}\cfttabafterpnum\par}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Support for the \Lpack{subfigure} package}
+% \changes{v1.1}{2000/02/12}{Added subfigure support}
+%
+%  The code for supporting the \Lpack{subfigure} package is, in all 
+% essentials, the same as that for the figure and table captions; only the
+% names are changed. However, the code need only be executed if the
+% \Lpack{subfigure} package is actually loaded. 
+%
+% \begin{macro}{\@cftl@subfig}
+%    This command redefines the |\l@subfigure| command. 
+%    \begin{macrocode}
+\newcommand{\@cftl@subfig}{
+%    \end{macrocode}
+% \begin{macro}{\l@subfigure}
+%  |\l@subfigure{|\meta{title}|}{|\meta{page}|}| typesets the LoF entry for
+% a |subfigure| caption heading. It is essentially the same as the 
+% parameterised code for |\l@figure| except that account has to be taken
+% of |lofdepth|.
+%    \begin{macrocode}
+\renewcommand*{\l@subfigure}[2]{%
+  \ifnum \c@lofdepth > \toclevel@subfigure
+    \vskip \cftbeforesubfigskip
+    {\leftskip \cftsubfigindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftsubfigindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftsubfignumwidth\relax
+     \let\@cftbsnum \cftsubfigpresnum
+     \let\@cftasnum \cftsubfigaftersnum
+     \let\@cftasnumb \cftsubfigaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftsubfigfont ##1}\nobreak
+     \cftsubfigfillnum{##2}}
+  \fi
+  }
+}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@cftsetsubfig}
+% This command initialises the setup for subfigure captions in the LoF.
+%    \begin{macrocode}
+\newcommand{\@cftsetsubfig}{%
+%    \end{macrocode}
+% \begin{macro}{\cftbeforesubfigskip}
+% \begin{macro}{\cftsubfigindent}
+% \begin{macro}{\cftsubfignumwidth}
+% \begin{macro}{\cftsubfigfont}
+% \begin{macro}{\cftsubfigpresnum}
+% \begin{macro}{\cftsubfigaftersnum}
+% \begin{macro}{\cftsubfigaftersnumb}
+% \begin{macro}{\cftsubfigleader}
+% \begin{macro}{\cftsubfigdotsep}
+% \begin{macro}{\cftsubfigpagefont}
+% \begin{macro}{\cftsubfigafterpnum}
+% \begin{macro}{\toclevel@subfig}
+% \begin{macro}{\cftsubfigfillnum}
+%    \begin{macrocode}
+\newlength{\cftbeforesubfigskip}
+  \setlength{\cftbeforesubfigskip}{\z@ \@plus.2\p@}
+\newlength{\cftsubfigindent}
+  \setlength{\cftsubfigindent}{3.8em}
+\newlength{\cftsubfignumwidth}
+  \setlength{\cftsubfignumwidth}{2.5em}
+\newcommand{\cftsubfigfont}{\normalfont}
+\newcommand{\cftsubfigpresnum}{}
+\newcommand{\cftsubfigaftersnum}{}
+\newcommand{\cftsubfigaftersnumb}{}
+\newcommand{\cftsubfigleader}{\normalfont\cftdotfill{\cftsubtabdotsep}}
+\newcommand{\cftsubfigdotsep}{\cftdotsep}
+\newcommand{\cftsubfigpagefont}{\normalfont}
+\newcommand{\cftsubfigafterpnum}{}
+\providecommand{\toclevel@subfigure}{1}
+\newcommand{\cftsubfigfillnum}[1]{%
+  {\cftsubfigleader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsubfigpagefont ##1}\cftsubfigafterpnum\par}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% This is the end of |\@cftsetsubfig|.
+%    \begin{macrocode}
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftl@subtab}
+%    This code redefines the code for |\l@subtable|.
+%    \begin{macrocode}
+\newcommand{\@cftl@subtab}{
+%    \end{macrocode}
+% \begin{macro}{\l@subtable}
+%  |\l@subtable{|\meta{title}|}{|\meta{page}|}| typesets the LoT entry for
+% a |subtable| caption heading. It is essentially the same as the 
+% parameterised code for |\l@table| except account has to be taken of 
+% |lotdepth|.
+%    \begin{macrocode}
+\renewcommand*{\l@subtable}[2]{%
+  \ifnum \c@lotdepth > \toclevel@subtable
+    \vskip \cftbeforesubtabskip
+    {\leftskip \cftsubtabindent\relax
+     \rightskip \@tocrmarg
+     \parfillskip -\rightskip
+     \parindent \cftsubtabindent\relax\@afterindenttrue
+     \interlinepenalty\@M
+     \leavevmode
+     \@tempdima \cftsubtabnumwidth\relax
+     \let\@cftbsnum \cftsubtabpresnum
+     \let\@cftasnum \cftsubtabaftersnum
+     \let\@cftasnumb \cftsubtabaftersnumb
+     \advance\leftskip \@tempdima \null\nobreak\hskip -\leftskip
+     {\cftsubtabfont ##1}\nobreak
+     \cftsubtabfillnum{##2}}
+  \fi
+  }
+}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@cftsetsubtab}
+% This command sets up the defaults for subtable entries in the LoT.
+%    \begin{macrocode}
+\newcommand{\@cftsetsubtab}{
+%    \end{macrocode}
+% \begin{macro}{\cftbeforesubtabskip}
+% \begin{macro}{\cftsubtabindent}
+% \begin{macro}{\cftsubtabnumwidth}
+% \begin{macro}{\cftsubtabfont}
+% \begin{macro}{\cftsubtabpresnum}
+% \begin{macro}{\cftsubtabaftersnum}
+% \begin{macro}{\cftsubtabaftersnumb}
+% \begin{macro}{\cftsubtableader}
+% \begin{macro}{\cftsubtabdotsep}
+% \begin{macro}{\cftsubtabpagefont}
+% \begin{macro}{\cftsubtabafterpnum}
+% \begin{macro}{\toclevel@subtable}
+% \begin{macro}{\cftsubtabfillnum}
+%  These are the user commands to control the typesetting of Subtable 
+% caption entries.
+%  They are initialised to give the standard appearance.
+%    \begin{macrocode}
+\newlength{\cftbeforesubtabskip}
+  \setlength{\cftbeforesubtabskip}{\z@ \@plus.2\p@}
+\newlength{\cftsubtabindent}
+  \setlength{\cftsubtabindent}{3.8em}
+\newlength{\cftsubtabnumwidth}
+  \setlength{\cftsubtabnumwidth}{2.5em}
+\newcommand{\cftsubtabfont}{\normalfont}
+\newcommand{\cftsubtabpresnum}{}
+\newcommand{\cftsubtabaftersnum}{}
+\newcommand{\cftsubtabaftersnumb}{}
+\newcommand{\cftsubtableader}{\normalfont\cftdotfill{\cftsubtabdotsep}}
+\newcommand{\cftsubtabdotsep}{\cftdotsep}
+\newcommand{\cftsubtabpagefont}{\normalfont}
+\newcommand{\cftsubtabafterpnum}{}
+\providecommand{\toclevel@subtable}{1}
+\newcommand{\cftsubtabfillnum}[1]{%
+  {\cftsubtableader}\nobreak
+  \hb@xt@\@pnumwidth{\hfil\cftsubtabpagefont ##1}\cftsubtabafterpnum\par}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% This is the end of |\@cftsetsubtab|.
+%    \begin{macrocode}
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%    Call the \Lpack{subfigure} package setup code only if the 
+% \Lopt{subfigure} option is specified. The |\l@...| redefinitions have to
+% come after the \Lpack{subfigure} package is loaded.
+%    \begin{macrocode}
+
+\if@cftsubfigopt
+  \@cftsetsubfig\@cftsetsubtab
+  \AtBeginDocument{\@cftl@subfig\@cftl@subtab}
+\fi
+%%  \AtBeginDocument{\if@cftsubfigopt
+%%    \@cftsetsubfig\@cftsetsubtab
+%%    \@cftl@subfig\@cftl@subtab
+%%  \fi}
+
+%    \end{macrocode}
+%
+%
+% \subsection{New list of\ldots}
+% \changes{v2.0}{2001/03/03}{Added \cs{newlistof} and \cs{newlistentry}}
+%
+% \begin{macro}{\newlistentry}
+% |\newlistentry[|\meta{within}|]{|\meta{counter}|}{|\meta{ext}|}{|\meta{level-1}|}| creates a set of commands for a new kind of entry into a List of.
+%    \begin{macrocode}
+\newcommand{\newlistentry}[4][\@empty]{%
+%    \end{macrocode}
+% \begin{macro}{\c@X}
+% \begin{macro}{\theX}
+% Check if \meta{within} and \meta{counter} have been defined. It is
+% an error if \meta{within} has not been defined, and an error if
+% \meta{counter} has been defined. Set the default counter values.
+%    \begin{macrocode}
+  \@ifundefined{c@#2}{%    check & set the counter
+    \ifx \@empty#1\relax
+      \newcounter{#2}
+    \else
+      \@ifundefined{c@#1}{\PackageWarning{tocloft}%
+                          {#1 has no counter for use as a `within'}
+        \newcounter{#2}}%
+      {\newcounter{#2}[#1]%
+       \expandafter\edef\csname the#2\endcsname{%
+         \expandafter\noexpand\csname the#1\endcsname.\noexpand\arabic{#2}}}
+    \fi
+    \setcounter{#2}{0}
+  }
+  {\PackageError{tocloft}{#2 has been previously defined}{\@eha}}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% That finishes off the error checking. No matter what the result, the
+% rest of the new commands are defined.
+%
+% \begin{macro}{\l@X}
+% |\l@X{|\meta{title}|}{|\meta{page}|}| typesets the entry.
+%    \begin{macrocode}
+  \@namedef{l@#2}##1##2{%
+%    \end{macrocode}
+% Only typeset if the |\Zdepth| is greater than \meta{level-1}.
+%    \begin{macrocode}
+    \ifnum \@nameuse{c@#3depth} > #4\relax
+      \vskip \@nameuse{cftbefore#2skip}
+      {\leftskip \@nameuse{cft#2indent}\relax
+       \rightskip \@tocrmarg
+       \parfillskip -\rightskip
+       \parindent \@nameuse{cft#2indent}\relax\@afterindenttrue
+       \interlinepenalty\@M
+       \leavevmode
+       \@tempdima \@nameuse{cft#2numwidth}\relax
+       \expandafter\let\expandafter\@cftbsnum\csname cft#2presnum\endcsname
+       \expandafter\let\expandafter\@cftasnum\csname cft#2aftersnum\endcsname
+       \expandafter\let\expandafter\@cftasnumb\csname cft#2aftersnumb\endcsname
+       \advance\leftskip\@tempdima \null\nobreak\hskip -\leftskip
+       {\@nameuse{cft#2font}##1}\nobreak
+       \@nameuse{cft#2fillnum}{##2}}
+    \fi
+  }  % end of \l@#2
+
+%    \end{macrocode}
+% \end{macro}
+%
+% Now define all the layout commands used by |\l@X|. The default
+% values of these correspond to those for section entries in
+% non-chaptered documents.
+% \begin{macro}{\cftbeforeXskip}
+%    \begin{macrocode}
+  \expandafter\newlength\csname cftbefore#2skip\endcsname
+    \setlength{\@nameuse{cftbefore#2skip}}{\z@ \@plus .2\p@}
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{\cftXindent}
+% \begin{macro}{\cftXnumwidth}
+%    \begin{macrocode}
+  \expandafter\newlength\csname cft#2indent\endcsname
+  \expandafter\newlength\csname cft#2numwidth\endcsname
+%    \end{macrocode}
+% Set the default values for the indent and numwidth depending on
+% the entry's level. A level of 1 corresponds to a figure entry.
+%    \begin{macrocode}
+  \ifcase #4\relax  % 0
+    \setlength{\@nameuse{cft#2indent}}{0em}
+    \setlength{\@nameuse{cft#2numwidth}}{1.5em}
+  \or               % 1
+    \setlength{\@nameuse{cft#2indent}}{1.5em}
+    \setlength{\@nameuse{cft#2numwidth}}{2.3em}
+  \or               % 2
+    \setlength{\@nameuse{cft#2indent}}{3.8em}
+    \setlength{\@nameuse{cft#2numwidth}}{3.2em}
+  \or               % 3
+    \setlength{\@nameuse{cft#2indent}}{7.0em}
+    \setlength{\@nameuse{cft#2numwidth}}{4.1em}
+  \else             % anything else
+    \setlength{\@nameuse{cft#2indent}}{10.0em}
+    \setlength{\@nameuse{cft#2numwidth}}{5.0em}
+  \fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\cftXfont}
+% \begin{macro}{\cftXpresnum}
+% \begin{macro}{\cftXaftersnum}
+% \begin{macro}{\cftXaftersnumb}
+% \begin{macro}{\cftXdotsep}
+% \begin{macro}{\cftXleader}
+% \begin{macro}{\cftXpagefont}
+% \begin{macro}{\cftXafterpnum}
+% And the remaining commands.
+%    \begin{macrocode}
+  \@namedef{cft#2font}{\normalfont}
+  \@namedef{cft#2presnum}{}
+  \@namedef{cft#2aftersnum}{}
+  \@namedef{cft#2aftersnumb}{}
+  \@namedef{cft#2dotsep}{\cftdotsep}
+  \@namedef{cft#2leader}{\normalfont\cftdotfill{\@nameuse{cft#2dotsep}}}
+  \@namedef{cft#2pagefont}{\normalfont}
+  \@namedef{cft#2afterpnum}{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\toclevel@X}
+% The hyperref package needs a command |\toclevel@X|, holding
+% the \meta{level-1} value.
+%    \begin{macrocode}
+  \@namedef{toclevel@#2}{#4}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftXfillnum}
+% Typeset the leader and page number.
+%    \begin{macrocode}
+  \@namedef{cft#2fillnum}##1{%
+    {\@nameuse{cft#2leader}}\nobreak
+    \hb@xt@\@pnumwidth{\hfil\@nameuse{cft#2pagefont}##1}\@nameuse{cft#2afterpnum}\par}
+%    \end{macrocode}
+% \end{macro}
+% This ends the definition of |\newlistentry|.
+%    \begin{macrocode}
+} % end \newlistentry
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\newlistof}
+% |\newlistof[|\meta{within}|]{|\meta{counter}|}{|\meta{ext}|}{|\meta{listofname}|}|
+% creates the commands for a new List of.
+%    \begin{macrocode}
+\newcommand{\newlistof}[4][\@empty]{%
+%    \end{macrocode}
+% Call |\newlistentry| to set up the first level entry.
+%    \begin{macrocode}
+  \ifx \@empty#1\relax
+    \newlistentry{#2}{#3}{0}
+  \else
+    \newlistentry[#1]{#2}{#3}{0}
+  \fi
+
+%    \end{macrocode}
+%
+% \begin{macro}{\ext@Z}
+% \begin{macro}{\Zdepth}
+% The file extension and listing depth.
+%    \begin{macrocode}
+  \@namedef{ext@#3}{#3}
+  \newcounter{#3depth}
+  \setcounter{#3depth}{1}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftmarkZ}
+% The heading marks for the listing.
+% \changes{v2.3}{2002/06/15}{different koma settings in \cs{newlistof}}
+%    \begin{macrocode}
+  \if@cftkoma
+    \@namedef{cftmark#3}{%
+      \@mkboth{#4}{#4}}
+  \else
+    \@namedef{cftmark#3}{%
+      \@mkboth{\MakeUppercase{#4}}{\MakeUppercase{#4}}}
+  \fi
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\listofX}
+% Typeset the listing title and entries.
+%    \begin{macrocode}
+ \if@cftnctoc  
+%    \end{macrocode}
+% For the \Lopt{titles} option, basically copy the code from
+% the standard |\tableofcontents| command.
+%    \begin{macrocode}
+  \@namedef{listof#2}{%
+    \@cfttocstart
+    \if@cfthaschapter
+      \chapter*{#4}
+    \else
+      \section*{#4}
+    \fi
+    \@nameuse{cftmark#3}
+    \@starttoc{#3}%
+    \@cfttocfinish}
+ \else
+%    \end{macrocode}
+% Otherwise use the fully parameterised definition.
+%    \begin{macrocode}
+  \@namedef{listof#2}{%
+    \@cfttocstart
+    \par
+    \begingroup
+      \parindent\z@ \parskip\cftparskip
+      \@nameuse{@cftmake#3title}
+      \@starttoc{#3}%
+    \endgroup
+    \@cfttocfinish}
+ \fi
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftmakeZtitle}
+% Typeset the title.
+% \changes{v2.3}{2002/06/15}{Added \cs{@secpenalty} to \cs{@cftmakeZtitle}}
+% \changes{v2.3}{2002/06/15}{Added \cs{@cftpagestyle} to \cs{@cftmakeZtitle}}
+%    \begin{macrocode}
+  \@namedef{@cftmake#3title}{%
+    \addpenalty\@secpenalty
+    \if@cfthaschapter
+      \vspace*{\@nameuse{cftbefore#3titleskip}}
+    \else
+      \vspace{\@nameuse{cftbefore#3titleskip}}
+    \fi
+    \@cftpagestyle
+    {\interlinepenalty\@M
+    {\@nameuse{cft#3titlefont}#4}{\@nameuse{cftafter#3title}}
+    \@nameuse{cftmark#3}
+    \par\nobreak
+    \vskip \@nameuse{cftafter#3titleskip}
+    \@afterheading}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftbeforeZtitleskip}
+% \begin{macro}{\cftafterZtitleskip}
+% \begin{macro}{\cftZtitlefont}
+% The skips before and after the title heading, and the title font.
+% The default values depend on whether or not the document class
+% has chapters.
+%    \begin{macrocode}
+   \expandafter\newlength\csname cftbefore#3titleskip\endcsname
+   \expandafter\newlength\csname cftafter#3titleskip\endcsname
+   \if@cfthaschapter
+      \setlength{\@nameuse{cftbefore#3titleskip}}{50pt}
+      \setlength{\@nameuse{cftafter#3titleskip}}{40pt}
+      \if@cftkoma
+        \@namedef{cft#3titlefont}{\size@chapter\sectfont}
+      \else
+        \@namedef{cft#3titlefont}{\normalfont\Huge\bfseries}
+      \fi
+    \else
+      \setlength{\@nameuse{cftbefore#3titleskip}}{3.5ex \@plus 1ex \@minus .2ex}
+      \setlength{\@nameuse{cftafter#3titleskip}}{2.3ex \@plus .2ex}
+      \if@cftkoma
+        \@namedef{cft#3titlefont}{\size@section\sectfont}
+      \else
+        \@namedef{cft#3titlefont}{\normalfont\Huge\bfseries}
+      \fi
+    \fi
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftafterZtitle}
+% Something to go after the title.
+%    \begin{macrocode}
+    \@namedef{cftafter#3title}{}
+%    \end{macrocode}
+% \end{macro}
+%
+% This is the end of the definition of |\newlistof|.
+%    \begin{macrocode}
+} % end \newlistof
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftsetindents}
+% \changes{v2.0}{2001/03/15}{Added \cs{cftsetindents}}
+% |\cftsetindents{|\meta{entry}|}{|\meta{indent}|}{|\meta{numwidth}|}| sets
+% the \textit{indent} and \textit{numwidth} for entry \meta{entry}. The macro
+% has to map between the external entry name and the internal shorthand.
+%    \begin{macrocode}
+\newcommand{\cftsetindents}[3]{%
+  \def\@cftemp{#1}
+  \ifx\@cftemp\cftchapname 
+    \@cftsetindents{chap}{#2}{#3}
+  \else
+    \ifx\@cftemp\cftsecname \@cftsetindents{sec}{#2}{#3}
+    \else
+      \ifx\@cftemp\cftsubsecname \@cftsetindents{subsec}{#2}{#3}
+      \else
+        \ifx\@cftemp\cftsubsubsecname \@cftsetindents{subsubsec}{#2}{#3}
+        \else
+          \ifx\@cftemp\cftparaname \@cftsetindents{para}{#2}{#3}
+          \else
+            \ifx\@cftemp\cftsubparaname \@cftsetindents{subpara}{#2}{#3} 
+            \else
+              \ifx\@cftemp\cftfigname \@cftsetindents{fig}{#2}{#3}
+              \else
+                \ifx\@cftemp\cftsubfigname \@cftsetindents{subfig}{#2}{#3} 
+                \else
+                  \ifx\@cftemp\cfttabname \@cftsetindents{tab}{#2}{#3}
+                  \else
+                    \ifx\@cftemp\cftsubtabname \@cftsetindents{subtab}{#2}{#3}
+                    \else
+                      \@cftsetindents{#1}{#2}{#3}
+                    \fi
+                  \fi
+                \fi
+              \fi
+            \fi
+          \fi
+        \fi
+      \fi
+    \fi
+  \fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cftsetindents}
+% |\@cftsetindents{|\meta{X}|}{|\meta{indent}|}{|\meta{numwidth}|}| is
+% the internal version of |\cftsetindents|, where in this case \meta{X}
+% is the internal (shorthand) name of the entry.
+%    \begin{macrocode}
+\newcommand{\@cftsetindents}[3]{%
+  \setlength{\@nameuse{cft#1indent}}{#2}
+  \setlength{\@nameuse{cft#1numwidth}}{#3}
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Switching page numbering}
+% \changes{v2.0}{2001/03/03}{Added page number switching off/on}
+%
+% \begin{macro}{\@cftpnumoff}
+% |\@cftpnumoff{|\meta{shorthand}|}| is the workhorse
+% for switching page numbering off. The \meta{shorthand} argument is the
+% shorthand name of the entry (e.g. |subsec| for |subsection|).
+% The macro redefines the |\cftXnumfill| command so that there is no leader
+% and the page number is ignored.
+%    \begin{macrocode}
+\newcommand{\@cftpnumoff}[1]{%
+  \@namedef{cft#1fillnum}##1{%
+    \cftparfillskip\@nameuse{cft#1afterpnum}\par}}
+    
+%    \end{macrocode}
+% \end{macro}  
+%
+% \begin{macro}{\cftchapname}
+% \begin{macro}{\cftsecname}
+% \begin{macro}{\cftsubsecname}
+% \begin{macro}{\cftsubsubsecname}
+% \begin{macro}{\cftparaname}
+% \begin{macro}{\cftsubparaname}
+% \begin{macro}{\cftfigname}
+% \begin{macro}{\cftsubfigname}
+% \begin{macro}{\cfttabname}
+% \begin{macro}{\cftsubtabname}
+%  Unfortunately an early design decision was the use shorthands like |sec|
+% for |section|. For the page switching I need to be able to correlate the
+% shorthands and longhands.
+%    \begin{macrocode}
+\newcommand*{\cftchapname}{chapter}
+\newcommand*{\cftsecname}{section}
+\newcommand*{\cftsubsecname}{subsection}
+\newcommand*{\cftsubsubsecname}{subsubsection}
+\newcommand*{\cftparaname}{paragraph}
+\newcommand*{\cftsubparaname}{subparagraph}
+\newcommand*{\cftfigname}{figure}
+\newcommand*{\cftsubfigname}{subfigure}
+\newcommand*{\cfttabname}{table}
+\newcommand*{\cftsubtabname}{subtable}
+
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cftpagenumbersoff}
+% The user level command for switching off page numbers is 
+% |\cftpagenumbersoff{|\meta{entry}|}| where \meta{entry} is the longhand
+% name of the entry. The principal task opf this macro is to determine
+% the corresponding shorthand name of the \meta{entry} and then call
+% |\@cftpnumoff| to do the work. For |part| and user-defined entries
+% the long- and short-hand entry names are identical.
+%    \begin{macrocode}
+\DeclareRobustCommand{\cftpagenumbersoff}[1]{%
+  \def\@cftemp{#1}
+  \ifx\@cftemp\cftchapname 
+    \@cftpnumoff{chap}
+  \else
+    \ifx\@cftemp\cftsecname \@cftpnumoff{sec} 
+    \else
+      \ifx\@cftemp\cftsubsecname \@cftpnumoff{subsec}
+      \else
+        \ifx\@cftemp\cftsubsubsecname \@cftpnumoff{subsubsec}
+        \else
+          \ifx\@cftemp\cftparaname \@cftpnumoff{para}
+          \else
+            \ifx\@cftemp\cftsubparaname \@cftpnumoff{subpara} 
+            \else
+              \ifx\@cftemp\cftfigname \@cftpnumoff{fig}
+              \else
+                \ifx\@cftemp\cftsubfigname \@cftpnumoff{subfig} 
+                \else
+                  \ifx\@cftemp\cfttabname \@cftpnumoff{tab} 
+                  \else
+                    \ifx\@cftemp\cftsubtabname \@cftpnumoff{subtab}
+                    \else
+                      \@cftpnumoff{#1}
+                    \fi
+                  \fi
+                \fi
+              \fi
+            \fi
+          \fi
+        \fi
+      \fi
+    \fi
+  \fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftpagenumberson}
+% |\cftpagenumberson{|\meta{entry}|}| is the user level command for 
+% reversing the corresponding |\cftpagenumbersoff|.
+%    \begin{macrocode}
+\DeclareRobustCommand{\cftpagenumberson}[1]{%
+  \def\@cftemp{#1}
+  \ifx\@cftemp\cftchapname 
+    \@cftpnumon{chap}
+  \else
+    \ifx\@cftemp\cftsecname \@cftpnumon{sec} 
+    \else
+      \ifx\@cftemp\cftsubsecname \@cftpnumon{subsec}
+      \else
+        \ifx\@cftemp\cftsubsubsecname \@cftpnumon{subsubsec}
+        \else
+          \ifx\@cftemp\cftparaname \@cftpnumon{para}
+          \else
+            \ifx\@cftemp\cftsubparaname \@cftpnumon{subpara} 
+            \else
+              \ifx\@cftemp\cftfigname \@cftpnumon{fig}
+              \else
+                \ifx\@cftemp\cftsubfigname \@cftpnumon{subfig} 
+                \else
+                  \ifx\@cftemp\cfttabname \@cftpnumon{tab} 
+                  \else
+                    \ifx\@cftemp\cftsubtabname \@cftpnumon{subtab}
+                    \else
+                      \@cftpnumon{#1}
+                    \fi
+                  \fi
+                \fi
+              \fi
+            \fi
+          \fi
+        \fi
+      \fi
+    \fi
+  \fi
+}
+
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\@cftpnumon}
+% |\@cftpnumon{|\meta{shorthand}|}| is the workhorse
+% for switching page numbering off. The \meta{shorthand} argument is the
+% shorthand name of the entry (e.g. |subsec| for |subsection|).
+% The macro defines the |\cftXnumfill| command to correspond to 
+% the default definition.
+%    \begin{macrocode}
+\newcommand{\@cftpnumon}[1]{%
+  \@namedef{cft#1fillnum}##1{%
+    {\@nameuse{cft#1leader}}\nobreak
+    \hb@xt@\@pnumwidth{\hfil\@nameuse{cft#1pagefont}##1}\@nameuse{cft#1afterpnum}\par}}
+    
+%    \end{macrocode}
+% \end{macro}  
+%
+%
+%
+%
+%
+%
+% \subsection{Experimental utilities}
+%
+%    The code in this section is experimental but in the sense that the
+% capabilities might be modified in the future rather than that the code
+% does not work.
+%
+% \begin{macro}{\cftchapterprecis}
+% This is experimental. |\cftchapterprecis{|\meta{text}|}| typesets
+% \meta{text} at the point where it is called, and also adds \meta{text}
+% to the \file{.toc} file. It is expects to be called immediately after
+% a |\chapter| command.
+%    \begin{macrocode}
+\newcommand{\cftchapterprecis}[1]{%
+  \cftchapterprecishere{#1}
+  \cftchapterprecistoc{#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftchapterprecishere}
+% |\cftchapterprecishere{|\meta{text}|}| typesets \meta{text}. It expects
+% to be called immediately after a |\chapter| command. First add some
+% negative vertical space to move it closer to the chapter heading.
+%    \begin{macrocode}
+\newcommand{\cftchapterprecishere}[1]{%
+  \vspace*{-2\baselineskip}
+%    \end{macrocode}
+% Typeset its argument using italic font in a |quote| environment.
+%    \begin{macrocode}
+  \begin{quote}\textit{#1}\end{quote}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftchapterprecistoc}
+% |\cftchapterprecistoc{|\meta{text}|}| adds \meta{text} to the \file{.toc}
+% file. The \meta{text} will be typeset within the same margins as the
+% the title text of a |\chapter| heading, using an italic font.
+%    \begin{macrocode}
+\newcommand{\cftchapterprecistoc}[1]{\addtocontents{toc}{%
+%    \end{macrocode}
+% Start a group to localize changes to the paragraphing. Set the 
+% left margin to the chapter indent plus the chapter number width.
+%    \begin{macrocode}
+  {\leftskip \cftchapindent\relax
+   \advance\leftskip \cftchapnumwidth\relax
+%    \end{macrocode}
+% Set the right hand margin to |\@tocrmarg|.
+%    \begin{macrocode}
+   \rightskip \@tocrmarg\relax
+%    \end{macrocode}
+% Typeset \meta{text} using an italic font, then ensure that the paragraph
+% is finished (to use the local skips). Finally close the group and we 
+% are done.
+%    \begin{macrocode}
+   \textit{#1}\protect\par}}}
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftlocalchange}
+% |\cftmakelocalchange{|\meta{file}|}{|\meta{pnumwidth}|}{|\meta{tocrmarg}|}|
+% makes an entry into \meta{file} to change the |\@pnumwidth| and
+% the |\@tocrmarg| values.
+%    \begin{macrocode}
+\newcommand{\cftlocalchange}[3]{%
+  \addtocontents{#1}{\protect\cftsetpnumwidth{#2} \protect\cftsetrmarg{#3}}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftaddtitleline}
+% |\cftaddtitleline{|\meta{file}|}{|\meta{kind}|}{|\meta{title}|}{|\meta{page}|}|
+% adds a |\contentsline| entry to \meta{file} with the given information.
+%    \begin{macrocode}
+\newcommand{\cftaddtitleline}[4]{\addtocontents{#1}{%
+  \protect\contentsline{#2}{#3}{#4}}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\cftaddnumtitleline}
+% |\cftaddtitleline{|\meta{file}|}{|\meta{kind}|}{|\meta{num}|}{|\meta{title}|}{|\meta{page}|}|
+% adds a |\contentsline| entry to \meta{file} with the given information.
+% \changes{v2.3c}{2003/09/26}{Removed \cs{ignorespaces} from \cs{cftaddnumtitleline}}
+%    \begin{macrocode}
+\newcommand{\cftaddnumtitleline}[5]{\addtocontents{#1}{%
+    \protect\contentsline{#2}{\protect\numberline{#3}#4}{#5}}}
+%    \end{macrocode}
+% \end{macro}
+%
+% And, if dear old \Lpack{hyperref} has been used, we have to fix up these
+% two macros.
+% \changes{2003/09/26}{v2.3c}{Hyperref fix for \cs{cftaddtitleline} and
+%                             \cs{cftaddnumtitleline}}
+%    \begin{macrocode}
+\AtBeginDocument{%
+  \@ifpackageloaded{hyperref}{%
+    \renewcommand{\cftaddtitleline}[4]{\addtocontents{#1}{%
+      \protect\contentsline{#2}{#3}{#4}{\@currentHref}}}
+    \renewcommand{\cftaddnumtitleline}[5]{\addtocontents{#1}{%
+      \protect\contentsline{#2}{\protect\numberline{#3}#4}{#5}{\@currentHref}}}
+  }{}
+}
+
+%    \end{macrocode}
+%
+%
+%
+%
+%    The end of this package.
+%    \begin{macrocode}
+%</usc>
+%    \end{macrocode}
+%
+%
+% \bibliographystyle{alpha}
+%
+% \begin{thebibliography}{GMS94}
+%
+% \bibitem[Coc95]{SUBFIGURE}
+% Steven Douglas Cochran.
+% \newblock \emph{{The subfigure package}}.
+% \newblock March 1995.
+% \newblock (Available from CTAN as file \texttt{subfigure.dtx})
+%
+% \bibitem[Dru99]{MINITOC}
+% Jean-Pierre Drucbert.
+% \newblock \emph{{The minitoc package}}.
+% \newblock August 1999.
+% \newblock (Available from CTAN in subdirectory \texttt{/minitoc})
+%
+% \bibitem[GMS94]{GOOSSENS94}
+% Michel Goossens, Frank Mittelbach, and Alexander Samarin.
+% \newblock {\em The LaTeX Companion}.
+% \newblock Addison-Wesley Publishing Company, 1994.
+%
+% \bibitem[Lin97]{FNCYCHAP}
+% Ulf~A. Lindgren.
+% \newblock \emph{{FncyChap V1.11}}.
+% \newblock April 1997.
+% \newblock (Available from CTAN in subdirectory \texttt{/fncychap})
+%
+% \bibitem[Lin95]{FLOAT}
+% Anselm Lingnau.
+% \newblock \emph{{An Improved Environment for Floats}}.
+% \newblock March 1995.
+% \newblock (Available from CTAN in subdirectory \texttt{/float})
+%
+% \bibitem[Wil96a]{ALGORITHM}
+% Peter Williams.
+% \newblock \emph{{Algorithms}}.
+% \newblock April 1996.
+% \newblock (Available from CTAN in subdirectory \texttt{/algorithm})
+%
+% \bibitem[Wil96b]{PRW96i}
+% Peter~R. Wilson.
+% \newblock \emph{{LaTeX for standards: The LaTeX package files user manual}}.
+% \newblock NIST Report NISTIR, June 1996.
+%
+% \bibitem[Wil00]{TOCBIBIND}
+% Peter~R. Wilson.
+% \newblock \emph{{The tocbibind package}}.
+% \newblock March 2000.
+% \newblock (Available from CTAN as file \texttt{tocbibind.dtx})
+%
+% \bibitem[Wil01]{CCAPTION}
+% Peter~R. Wilson.
+% \newblock \emph{{The ccaption package}}.
+% \newblock March 2001.
+% \newblock (Available from CTAN as file \texttt{ccaption.dtx})
+%
+% \end{thebibliography}
+%
+%
+% \Finale
+% \PrintIndex
+%
+\endinput
+
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+
+
diff --git a/Master/texmf-dist/source/latex/tocloft/tocloft.ins b/Master/texmf-dist/source/latex/tocloft/tocloft.ins
new file mode 100644
index 00000000000..55f10d39567
--- /dev/null
+++ b/Master/texmf-dist/source/latex/tocloft/tocloft.ins
@@ -0,0 +1,76 @@
+%% tocloft.ins
+%% Author: Peter Wilson (CUA) now at peter.r.wilson@boeing.com
+%%                            (or pandgwilson@earthlink.net) 
+%% Copyright 1998-2003 Peter R. Wilson
+%%
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3 of this license or (at your option) any 
+%% later version.
+%% The latest version of the license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of
+%% LaTeX version 2003/06/01 or later.
+%%
+%% This work has the LPPL maintenance status "author-maintained".
+%%
+%% This work consists of the files listed in the README file.
+%%
+%%
+%% This file will generate fast loadable files and documentation
+%% driver files from the doc files in this work when run through
+%% LaTeX.
+%%
+%% --------------- start of docstrip commands ------------------
+%%
+\def\batchfile{tocloft.ins}
+\input docstrip.tex
+\preamble
+
+  Author: Peter Wilson (CUA) now at peter.r.wilson@boeing.com
+                             (or pandgwilson@earthlink.net) 
+  Copyright 1998-2003 Peter R. Wilson
+ 
+  This work may be distributed and/or modified under the
+  conditions of the LaTeX Project Public License, either
+  version 1.3 of this license or (at your option) any 
+  later version.
+  The latest version of the license is in
+     http://www.latex-project.org/lppl.txt
+  and version 1.3 or later is part of all distributions of
+  LaTeX version 2003/06/01 or later.
+ 
+  This work has the LPPL maintenance status "author-maintained".
+ 
+  This work consists of the files listed in the README file.
+
+\endpreamble
+
+\keepsilent
+
+%%% \Msg{*** Generating the driver file ***}
+%%% \generateFile{tocloft.drv}{t}{\from{tocloft.dtx}{driver}}
+
+\Msg{*** Generating the LaTeX2e package files ***}
+
+\generateFile{tocloft.sty}{t}{\from{tocloft.dtx}{usc}}
+
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* file(s) into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space tocloft.sty}
+\Msg{*}
+\Msg{*}
+\Msg{* To produce the documentation run the files ending with}
+\Msg{* `.dtx' through LaTeX.}
+\Msg{* Process any name.idx file by:}
+\Msg{* \space\space\space\space makeindex -s gind.ist name}
+\Msg{* Process any name.glo file by:}
+\Msg{* \space\space\space\space makeindex -s gglo.ist -o name.gls name.glo}
+\Msg{*}
+\Msg{* Happy TeXing}
+\Msg{***********************************************************}
+
+\endinput