new latex package simplecd 1.0 (4jul10)

git-svn-id: svn://tug.org/texlive/trunk@19231 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 785 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/simplecd/simplecd.dtx b/Master/texmf-dist/source/latex/simplecd/simplecd.dtx
new file mode 100644
index 00000000000..4b6b3245eae
--- /dev/null
+++ b/Master/texmf-dist/source/latex/simplecd/simplecd.dtx
@@ -0,0 +1,732 @@
+
+% \iffalse meta-comment
+%
+% Copyright (C) 2010 by Daniel Majoros
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.2 of this license or (at your option) any later
+% version. The latest version of this license is in:
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.2 or later is part of all distributions of
+% LaTeX version 1999/12/01 or later.
+%
+% \fi
+%
+%\iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{simplecd}
+%<package>    [2010/07/01 v1.0 simple cd, dvd covers]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{simplecd}
+\usepackage{fix-cm}
+\usepackage{rotating}
+
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+            
+\begin{document}
+     \DocInput{./simplecd.dtx} 
+\end{document}
+%</driver>
+%\fi
+% 
+% \CheckSum{451}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%     Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%     Digits \0\1\2\3\4\5\6\7\8\9
+%     Exclamation         \!     Double quote    \"     Hash (number)   \#
+%     Dollar              \$     Percent         \%     Ampersand       \&
+%     Acute accent        \'     Left paren      \(     Right paren     \)
+%     Asterisk            \*     Plus            \+     Comma           \,
+%     Minus               \-     Point           \.     Solidus         \/
+%     Colon               \:     Semicolon       \;     Less than       \<
+%     Equals              \=     Greater than    \>     Question mark   \?
+%     Commercial at       \@     Left bracket    \[     Backslash       \\
+%     Right bracket       \]     Circumflex      \^     Underscore      \_
+%     Grave accent        \`     Left brace      \{     Vertical bar    \|
+%     Right brace         \}     Tilde           \~}
+%
+% \changes{v1.0}{2010/07/01}{Initial version}
+%
+% \DoNotIndex{\newline, \\, \space, \begin, \end, \rule, \cline, \hspace, \vspace, \centering, \DeclareRobustCommand}
+% \DoNotIndex{\newcommand, \newlength, \setlength, \parbox, \line, \putline, \resizebox, \unitlength}
+% \DoNotIndex{\put, \RequirePackage, \vrule, \DeclareOption, \fontsize, \ProcessOptions, \relax}
+% \DoNotIndex{\renewcommand, \selectfont, \multicolumn, \! , !\! , !\ }
+%
+% \GetFileInfo{simplecd.sty}
+%
+% \title{The \textsf{simplecd} package\thanks{This document
+%  corresponds to \textsf{simplecd}~\fileversion,
+%  dated~\filedate.}}
+% \author{D\'aniel Majoros}
+%
+% \maketitle
+
+% \begin{abstract}
+%     The simplecd package provides printable cut-outs for various CD, DVD and other disc holders.
+%     The name of the package comes form it's implementation and ease of use.
+% \end{abstract}
+%
+% \section{Introduction}
+% The \textsf{simplecd} package was created for producing cut-outs for creating covers, inlays(inlets) for 
+% optical disc packaging such as jewel cases, keepcases. The covers were aimed for containing only 
+% simple text with different font sizes, but since it is only a |\parbox| in a tabular enviroment's cell, it can
+% contain anything that a |\parbox| can contain.
+%
+% There are also macros which can resize ready-to-print images to the appropriate size.
+%
+% It is worth to decrease the document's margins, so the covers can fit onto
+% an A4 sized paper. For this, use the \textsf{geometry} package, like so: \\
+% |\usepackage[left=1cm, top=1cm, right=1cm, bottom=1cm]{geometry}|
+%
+% Since \textsf{simplecd} package uses the \textsf{rotating} package for rotation, one important
+% note from the \textsf{rotating} package's documentation must be mentioned here.
+% \begin{quotation}
+% Note that the package uses rotation facilities from the graphicx package. When
+% generating DVI output, users should note that rotation is typically not visible in
+% a DVI viewer: conversion to, and viewing, PostScript or PDF is necessary.
+% \end{quotation}
+%
+% \section{Usage}
+%
+% This section gives a detailed information on macros. Lists their parameters also. The universal macros are
+% also detailed, which are behind the simple ones, and can be parmeterised with additional information
+% to meet other requirements. 
+%
+% Do not put too many text inside a cover, or an unwanted resize can happen. Some of the examples in this 
+% documentation were rotated, and all of them were shrunk.
+%
+% \DescribeMacro{\covers}
+% The first and foremost macro is for the standard jewel case and it's backsheet with two spines.
+% The parameters of the |\covers| macro are as follows:
+% |\covers| \oarg{backsheet text} \marg{cover title} \marg{spine text}. The first two can be
+% whole paragraphs with different font sized texts. For a new line, you can use |\\|,
+% and for a skip, use |\vspace{length to skip}| in the text after a new line. Besides the first text part,
+% the other texts after a |\vspace| can be resized with the \textsf{fix-cm} package's |\fontsize| command.
+% The spine text will be printed on both spines. The spine
+% text should be short enough to fit into the desired space.
+%
+% Example: \\
+% |\covers|\\
+%  \indent |[{\Large Backsheet text}]| \\
+%  \indent |{{\Huge Jewelcase Title} \\ \vspace{1cm} Subtitle}| \\
+%  \indent |{Spine Text}| \\
+%
+% \resizebox{0.95\textwidth}{!}{\covers[{\Large Backsheet text}]{{\Huge Jewelcase Title} \\ \vspace{1cm} Subtitle}{Spine Text}}
+% 
+% \vspace*{0.5cm}
+%
+% \DescribeMacro{\frontcover}
+% The |\frontcover|, which is called in the previously mentioned macro, produces the front cover for
+% the jewel case. It's mandatory argument is the cover text: |\frontcover| \marg{cover text}.
+%
+% \DescribeMacro{\backsheet}
+% The |\backsheet| macro is also called from the |\covers| macro. It produces the backsheet with two
+% identical spines. The usage is |\backsheet| \oarg{backsheet middle text} \marg{spine text}.
+%
+% \DescribeMacro{\jewelspine}
+% The |\jewelspine| macro creates a single spine for the jewelcase. It's usage is |\jewelspine| \marg{spine text}.
+%
+% \DescribeMacro{\djewel}
+% The |\djewel| macro creates a double page jewel case cover. Text can be put on one side, then it should be folded
+% in half. The usage is: |\djewel| \marg{first page text} \marg{second page text}.
+%
+% Example: \\
+% |\djewel| \\
+%   \indent |{\fontsize{70}{36}\selectfont Big Title}| \\
+%   \indent |{Second page}| \\
+%
+% \begin{sideways}\resizebox{0.48\textwidth}{!}{\djewel{\fontsize{70}{36}\selectfont Big Title}{Second page}}\end{sideways}
+%
+% \vspace*{0.5cm}
+%
+% This is also an example of using costum sized fonts with the \textsf{fix-cm} package.
+%
+% \DescribeMacro{\slimdvd} \DescribeMacro{\dvd}
+% The |\slimdvd| and |\dvd| macros creates a slim and a simple DVD keepcase. Text can be put on both 
+% sides plus the spine area. \DescribeMacro{\bluray} The |\bluray| macro creates a keepcase for Blu-Ray disks.
+% Their usage is: |\dvd| \oarg{backside text} \marg{cover text} \marg{spine text}.
+%
+% Example: \DescribeMacro{\slimdvd} \\
+% |\slimdvd| \\
+%  \indent |[{\Large Backsheet text}]| \\                                  
+%  \indent |{{\Huge \underline{SlimDVD Title}} \\ \vspace{1cm} Subtitle}|  \\    
+%  \indent |{Spine Text}|  \\
+%
+% \begin{turn}{270}\resizebox{0.65\textwidth}{!}{\slimdvd[{\Large Backsheet text}]%
+% {{\Huge \underline{SlimDVD Title}} \\ \vspace{1cm} Subtitle}{Spine Text}} \end{turn}
+%
+% \vspace*{0.5cm}
+%
+% \DescribeMacro{\keepcase}
+% The above mentioned macros are really similar, thus the introduction of the |\keepcase| macro. With this, one can create
+% a costum sized keepcase in the format of cover, spine and a backside. It's usage is: 
+% |\keepcase| \oarg{backtext} \marg{cover text} \marg{spinetext} \marg{cover height} \marg{cover width} \marg{spine width}.
+% The cover width refers to one side's width without the spine.
+%
+% \DescribeMacro{\sleeve}
+% The |\sleeve| macro creates a disk-sleeve which requires some glue after cutting it out. The upper part 
+% can be used to close the sleeve. Text can be put on 
+% it's cover. The usage is: |\sleeve| \marg{cover text}.
+%
+% Example: \\
+% |\sleeve| |{{\Huge Sleeve text}}| \\
+%
+% \resizebox{0.5\textwidth}{!}{\sleeve{{\Huge Sleeve text}}}
+%
+% \vspace*{0.5cm}
+%
+% \DescribeMacro{\coverimg} \DescribeMacro{\backsheetimg} \DescribeMacro{\dvdimg} \DescribeMacro{\slimdvdimg}
+% \DescribeMacro{\blurayimg}
+% The macros width the \emph{img} ending are expecting an image, and resizing this image to the appropriate cover
+% size. The macros are |\coverimg|, |\backsheetimg|, |\dvdimg|, |\slimdvdimg|, |\blurayimg|. Their usage is 
+% |\coverimg| \parg{picture}. No image macro for 
+% the sleeve. These macros does not keep the aspect ratio of the given image, thus it should already be at the 
+% correct ratio.
+%
+% An example without the result: 
+% |\dvdimg{includegraphics{coverpic}}| \\
+%
+% \vspace*{0.5cm}
+%
+% \DescribeMacro{\dvdinlay} \DescribeMacro{\blurayinlay}
+% The |\dvdinlay| and |\blurayinlay| macros create a one sided inlay for the appropriate keepcases.
+% Their usage is |\dvdinlay| \marg{text}. \DescribeMacro{\inlay} With the universal |\inlay| macro, one can create
+% a costum sized inlay. It's usage is: |\inlay| \marg{text} \marg{inlay width} \marg{inlay height}.
+%
+% Example: \\
+% |\dvdinlay| \\
+%   \indent |{{\Large DVD Inlay}| \\
+%   \ \\
+%   \indent |\vspace{5cm} TextTextText| \\
+%   \ \\
+%   \indent |\vspace{1cm} {\fontsize{20}{36}\selectfont TextText}}| \\
+%
+% \resizebox{0.5\textwidth}{!}%
+% {\dvdinlay{{\Large DVD Inlay}
+%
+% \vspace{5cm} TextTextText 
+%
+% \vspace{1cm} {\fontsize{20}{36}\selectfont TextText}}}
+%
+% \vspace*{0.5cm}
+%
+% \section{Package Options}
+%
+% All of the above presented macros are containing some text alignment lengths. Without them, the texts would be 
+% centered vertically in the cells. The |noalign| option zeroes these alignment lengths, so one can align the 
+% texts individually with the |\vspace| commands inside the text.
+%
+% As default, all covers contain folding lines. With the |nofold| option these can be removed. The only exception is 
+% the |\sleeve| macro where the areas to be glued are keeping their folding lines.
+%
+% The |spiner| option rotates all spine texts with $180^\circ$. The \textsf{rotating} package (which is used for 
+% rotating) is somewhat incompatible with
+% utf8 encoding and/or T1 font type when it comes to upside-down text. So do not use the packages mentioned below
+% with this option:
+% \begin{quotation}
+%   \noindent
+%   |\usepackage{t1enc}| \\
+%   |\usepackage{ucs}| \\
+%   |\usepackage[utf8x]{inputenc}| \\
+%   |\usepackage[T1]{fontenc}| \\
+% \end{quotation}
+% 
+% \StopEventually{\PrintChanges\PrintIndex}
+%
+% \section{Implementation}
+%
+% Used for rotating text.
+%    \begin{macrocode}
+\RequirePackage{rotating}
+%    \end{macrocode}
+%
+% Used for setting fix font size for spine texts.
+%    \begin{macrocode}
+\RequirePackage{fix-cm}
+%    \end{macrocode}
+%
+% Used for the m tabular column
+%    \begin{macrocode}
+\RequirePackage{array}
+%    \end{macrocode}
+%
+% Used for calculating lengths
+%    \begin{macrocode}
+\RequirePackage{calc}
+%    \end{macrocode}
+
+%    The |noalign| option sets all text aligning lengths to zero.
+%    \begin{macrocode}
+\DeclareOption{noalign}{
+    \setlength{\sc@jfcalign}{0cm}
+    \setlength{\sc@jbsalign}{0cm}
+    \setlength{\sc@slalign}{0cm}
+    \setlength{\sc@kcfalign}{0cm}
+    \setlength{\sc@kcbalign}{0cm}
+    \setlength{\sc@inalign}{0cm}
+    \setlength{\sc@djewsalign}{0cm}
+}
+%    \end{macrocode}
+%
+%    The |nofold| option removes the folding lines on the cut-outs.
+%    \begin{macrocode}
+\DeclareOption{nofold}{
+    \renewcommand{\sc@hfoldline}[1]{}
+    \setlength{\sc@vfoldline}{0pt}
+}
+%    \end{macrocode}
+
+% \begin{macro}{\sc@hfoldline}
+%    Creates a horizontal folding line. \\
+%    Usage: |\sc@hfoldline| \marg{columns} 
+%    \begin{macrocode}
+\newcommand{\sc@hfoldline}[1]{
+    \cline{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\sc@vfoldline}
+%    Size of the default vertical folding line.
+%    \begin{macrocode}
+\newlength{\sc@vfoldline}
+\setlength{\sc@vfoldline}{0.4pt}
+%    \end{macrocode}
+% \end{macro}
+
+%    Redefines rotation degrees to rotate spine text with $180^\circ$.
+%    \begin{macrocode}
+\DeclareOption{spiner}{
+    \renewcommand{\sc@spinerotone}{180}
+    \renewcommand{\sc@spinerottwo}{90}
+    \renewcommand{\sc@spinerotthree}{270}
+}
+%    \end{macrocode}
+
+% \begin{macro}{\sc@spinerotone}
+%    No rotation by default. \\
+%    Usage: |\sc@spinerotone|
+%    \begin{macrocode}
+\newcommand{\sc@spinerotone}{0}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\sc@spinerottwo}
+%    Default rotation degree. \\
+%    Usage: |\sc@spinerottwo|
+%    \begin{macrocode}
+\newcommand{\sc@spinerottwo}{270}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\sc@spinerotthree}
+%    Default rotation degree. \\
+%    Usage: |\sc@spinerotthree|
+%    \begin{macrocode}
+\newcommand{\sc@spinerotthree}{90}
+%    \end{macrocode}
+% \end{macro}
+
+% Dimension names are created as follows: prefixed with |sc@|, then some letters for
+% identifying the case, then place, then width or height.
+%
+%% CD jewelcase dimensions
+%    \begin{macrocode}
+\newlength{\sc@cdjccoverheight}
+\setlength{\sc@cdjccoverheight}{120mm}
+\newlength{\sc@cdjccoverwidth}
+\setlength{\sc@cdjccoverwidth}{120mm}
+\newlength{\sc@cdjcbackheight}
+\setlength{\sc@cdjcbackheight}{117.5mm}
+\newlength{\sc@cdjcbackwidth}
+\setlength{\sc@cdjcbackwidth}{138mm}
+\newlength{\sc@cdjcspinewidth}
+\setlength{\sc@cdjcspinewidth}{6mm}
+%    \end{macrocode}
+
+%% Jewelcase spine fixed text font size
+%    \begin{macrocode}
+\newcommand{\sc@cdjfontsize}{15}
+%    \end{macrocode}
+
+%% Disk sleeve dimensions
+%    \begin{macrocode}
+\newlength{\sc@dsdim}
+\setlength{\sc@dsdim}{125mm}
+%    \end{macrocode}
+
+%% Slim DVD keepcase dimensions
+%    \begin{macrocode}
+\newlength{\sc@sdvdcoverwidth}
+\setlength{\sc@sdvdcoverwidth}{128.5mm}
+\newlength{\sc@sdvdspinewidth}
+\setlength{\sc@sdvdspinewidth}{7mm}
+%    \end{macrocode}
+
+%% DVD keepcase dimensions
+%    \begin{macrocode}
+\newlength{\sc@dvdkcheight}
+\setlength{\sc@dvdkcheight}{183mm}
+\newlength{\sc@dvdkccoverwidth}
+\setlength{\sc@dvdkccoverwidth}{129.5mm}
+\newlength{\sc@dvdkcspinewidth}
+\setlength{\sc@dvdkcspinewidth}{14mm}
+\newlength{\sc@dvdkcinletwidth}
+\setlength{\sc@dvdkcinletwidth}{115mm}
+\newlength{\sc@dvdkcinletheight}
+\setlength{\sc@dvdkcinletheight}{175mm}
+%    \end{macrocode}
+
+%% Blu-Ray case dimensions
+%    \begin{macrocode}
+\newlength{\sc@brcoverwidth}
+\setlength{\sc@brcoverwidth}{128mm}
+\newlength{\sc@brcoverheight}
+\setlength{\sc@brcoverheight}{149mm}
+\newlength{\sc@brspinewidth}
+\setlength{\sc@brspinewidth}{14mm}
+\newlength{\sc@brinletwidth}
+\setlength{\sc@brinletwidth}{115mm}
+\newlength{\sc@brinletheight}
+\setlength{\sc@brinletheight}{140mm}
+%    \end{macrocode}
+
+%% Width and correction of the invisible |\rule|'s column 
+%    \begin{macrocode}
+\newlength{\sc@ircwidth}
+\setlength{\sc@ircwidth}{0.1mm}
+\newlength{\sc@ircorr}
+\setlength{\sc@ircorr}{1mm}
+%    \end{macrocode}
+
+% Naming conventions in the aligning lengths: first letters are for the case, then f for front, b for back,
+% and the align word.
+%
+%%Text aligning lengths
+% These lengths ensure that the text is not in the vertical center of a cell,
+% instead, they are little above of the center. 
+%    \begin{macrocode}
+\newlength{\sc@jfcalign}
+\setlength{\sc@jfcalign}{1.5cm}
+\newlength{\sc@jbsalign}
+\setlength{\sc@jbsalign}{3cm}
+\newlength{\sc@slalign}
+\setlength{\sc@slalign}{1.5cm}
+\newlength{\sc@kcfalign}
+\setlength{\sc@kcfalign}{4cm}
+\newlength{\sc@kcbalign}
+\setlength{\sc@kcbalign}{3cm}
+\newlength{\sc@inalign}
+\setlength{\sc@inalign}{3cm}
+\newlength{\sc@djewsalign}
+\setlength{\sc@djewsalign}{3cm}
+%    \end{macrocode}
+
+%    \begin{macrocode}
+\ProcessOptions\relax 
+%    \end{macrocode}
+
+% The covers are created as simple tabular cells, and in the rightmost cell is an invisible |\rule| that
+% ensures the height of the cell regardless of the text inserted into the other cells. The width of the 
+% cells are provided by the m column type of the \texttt{array} package.
+%
+% The space produced with the |\vspace| macros are for aligning purposes. Without them, the texts would be 
+% vertically centered in the cell. 
+
+% \begin{macro}{\covers}
+%    Creates a jewel case cover with a front and a backsheet. \\
+%    Usage: |\covers| \oarg{backsheet text} \marg{cover title} \marg{spine text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\covers}[3][\ ]{
+    \frontcover{#2}
+    
+    \vspace*{0.5cm}
+    \backsheet[#1]{#3}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\frontcover}
+%    Creates front cover for a jewel case. \\
+%    Usage: |\frontcover| \marg{cover title}
+%    \begin{macrocode}
+\DeclareRobustCommand{\frontcover}[1]{
+    \sc@cell{#1}{\sc@cdjccoverwidth}{\sc@cdjccoverheight}%
+    {\vspace{\sc@jfcalign}}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\backsheet}
+%    Creates backsheet for a jewel case with 2 spines. \\
+%    Usage: |\backsheet| \oarg{backsheet middle text} \marg{spine text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\backsheet}[2][\ ]{
+    \begin{tabular}%
+        {|@{\hspace{0.4mm}}m{\sc@cdjcspinewidth-0.4mm}@{}%
+            !{\vrule width \sc@vfoldline}%
+            @{}m{\sc@cdjcbackwidth}@{}%
+            !{\vrule width \sc@vfoldline}@{}%
+            m{\sc@cdjcspinewidth-0.4mm}@{\hspace{0.4mm}}%
+            |m{\sc@ircwidth}}
+        \cline{1-3}
+        \centering%
+        \begin{turn}{\sc@spinerotthree}%
+            {\fontsize{\sc@cdjfontsize}{36}\selectfont #2 }%
+        \end{turn} %
+        & \parbox[c]{\sc@cdjcbackwidth}{\centering #1 \\ 
+        \vspace{\sc@jbsalign}}%
+        & \centering %
+        \begin{turn}{\sc@spinerottwo}%
+            {\fontsize{\sc@cdjfontsize}{36}\selectfont #2}%
+        \end{turn} & \rule{0pt}{\sc@cdjcbackheight-\sc@ircorr} \\
+        \cline{1-3}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\jewelspine}
+%    Creates a single spine for a jewel case. \\
+%    Usage: |\jewelspine| \marg{text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\jewelspine}[1]{
+    \begin{tabular}{|@{}m{\sc@cdjcbackheight}@{}|m{\sc@ircwidth}}
+        \cline{1-1} %
+        \centering %
+        {\fontsize{\sc@cdjfontsize}{36}\selectfont #1}& %
+        \rule{0pt}{\sc@cdjcspinewidth-0.1cm} \\
+        \cline{1-1}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\sleeve}
+%    Creates a disk sleeve for cutting out and glueing together. \\
+%    Usage: |\sleeve| \marg{middle text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\sleeve}[1]{
+    \begin{tabular}{m{10mm}|@{}m{\sc@dsdim}@{}|m{10mm}m{\sc@ircwidth}}
+        \multicolumn{3}{c}{ \setlength{\unitlength}{0.5cm} 
+        \begin{picture}(0,0)% 
+            \put(-12.5,-0.25){\line(1,1){4}}
+            \put(-8.5,3.75){\line(1,0){17}}
+            \put(12.5,-0.25){\line(-1,1){4}}
+        \end{picture} \rule{0pt}{3cm}} \\
+        \cline{2-2}
+        \centering \setlength{\unitlength}{0.5cm}
+        \begin{picture}(0,0)%
+            \put(1.45,-12.38){\line(-1,1){1.5}}% 
+            \put(-0.06,-10.9){\line(0,1){22.08}} %
+            \put(-0.06,11.18){\line(1,1){1.5}}% 
+        \end{picture} & \parbox[c]{\sc@dsdim}%
+            {\centering #1 \\ \vspace{\sc@slalign}} &%
+        \setlength{\unitlength}{0.5cm} %
+        \begin{picture}(0,0)%
+            \put(-0.45,-12.38){\line(1,1){1.5}}% 
+            \put(1.04,-10.9){\line(0,1){22.08}} %
+            \put(1.04,11.18){\line(-1,1){1.5}}% 
+        \end{picture} & \rule{0pt}{\sc@dsdim-\sc@ircorr}\\
+        \sc@hfoldline{2-2}
+        & & & \rule{0pt}{\sc@dsdim-0.1cm} \\
+        \cline{2-2}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\keepcase}
+%    Universal macro for creating keepcases in various sizes.
+%    Usage: |\keepcase| \oarg{backtext} \marg{cover text} \marg{spinetext} \marg{cover height} \marg{cover width} \marg{spine width}
+%    \begin{macrocode}
+\DeclareRobustCommand{\keepcase}[6][]{
+    \begin{tabular}{|@{}m{#4}@{}|m{\sc@ircwidth}}
+        \cline{1-1}
+        \centering
+        \begin{sideways} \parbox[c]{#5}{\centering #2 %
+            \\ \vspace{\sc@kcfalign}} %
+        \end{sideways} & \rule{0pt}{#5-\sc@ircorr} \\
+        \sc@hfoldline{1-1} \centering %
+        \begin{turn}{\sc@spinerotone}%
+            #3 %
+        \end{turn}%
+        & \rule{0pt}{#6-\sc@ircorr} \\
+        \sc@hfoldline{1-1}%
+        \centering %
+        \begin{sideways} \parbox[c]{#5}{\centering #1\ \\ %
+        \vspace{\sc@kcbalign}} \end{sideways} & %
+        \rule{0pt} {#5-\sc@ircorr}\\
+        \cline{1-1}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\slimdvd}
+%    Creates a slim dvd keepcase cover. \\
+%    Usage: |\slimdvd| \oarg{back text} \marg{cover text} \marg{spine text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\slimdvd}[3][]{
+    \keepcase[#1]{#2}{#3}{\sc@dvdkcheight}{\sc@sdvdcoverwidth}%
+        {\sc@sdvdspinewidth}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\dvd}
+%    Creates a dvd keepcase. \\
+%    Usage: |\dvd| \oarg{back text} \marg{cover text} \marg{spine text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\dvd}[3][]{
+    \keepcase[#1]{#2}{#3}{\sc@dvdkcheight}{\sc@dvdkccoverwidth-1.5mm}%
+        {\sc@dvdkcspinewidth}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\bluray}
+%    Creates a Blu-Ray keepcase.\\
+%    Usage: |\bluray| \oarg{backtext} \marg{cover text} \marg{spine text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\bluray}[3][]{
+    \keepcase[#1]{#2}{#3}{\sc@brcoverheight}{\sc@brcoverwidth}%
+        {\sc@brspinewidth}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\coverimg}
+%    Resizes the image for a jewel case cover. \\
+%    Usage: |\coverimg| \parg{picture}
+%    \begin{macrocode}
+\DeclareRobustCommand{\coverimg}[1]{
+    \resizebox{\sc@cdjccoverwidth}{\sc@cdjccoverheight}{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\backsheetimg}
+%    Resizes the image for a jewel case backsheet with spines. \\
+%    Usage: |\backsheetimg| \parg{picture}
+%    \begin{macrocode}
+\DeclareRobustCommand{\backsheetimg}[1]{
+    \resizebox{\sc@cdjcbackwidth+\sc@cdjcspinewidth*2}%
+        {\sc@cdjcbackheight}{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\slimdvdimg}
+%    Resizes an image for the slim dvd keepcase. \\
+%    Usage: |\slimdvdimg| \parg{picture}
+%    \begin{macrocode}
+\DeclareRobustCommand{\slimdvdimg}[1]{
+    \resizebox{\sc@dvdkcheight}%
+        {\sc@sdvdcoverwidth*2+\sc@sdvdspinewidth}{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\dvdimg}
+%    Resizes an image for a dvd keepcase. \\
+%    Usage: |\dvdimg| \parg{picture}
+%    \begin{macrocode}
+\DeclareRobustCommand{\dvdimg}[1]{
+    \resizebox{\sc@dvdkcheight}%
+        {\sc@dvdkccoverwidth*2+\sc@dvdkcspinewidth}{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\blurayimg}
+%    Resizes an image for the Blu-Ray keepcase. \\
+%    Usage: |\blurayimg| \parg{picture}
+%    \begin{macrocode}
+\DeclareRobustCommand{\blurayimg}[1]{
+    \resizebox{\sc@brcoverheight}%
+        {\sc@brcoverwidth*2+\sc@brspinewidth}{#1}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\sc@cell}
+%    Creates a single cell for a cover, inlay. \\
+%    Usage: |\sc@cell| \marg{text} \marg{width} \marg{height} \marg{aligning space}
+%    \begin{macrocode}
+\DeclareRobustCommand{\sc@cell}[4]{
+    \begin{tabular}{|@{}m{#2}@{}|m{\sc@ircwidth}}
+        \cline{1-1}%
+        \centering %
+        \parbox[c]{#2}{\centering #1 \\ #4} & \rule{0pt}{{#3}-\sc@ircorr}\\
+        \cline{1-1}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\inlay}
+%    Creates a costum sized inlay.
+%    Usage: |\inlay| \marg{text} \marg{width} \marg{height}
+%    \begin{macrocode}
+\DeclareRobustCommand{\inlay}[3]{
+    \sc@cell{#1}{#2}{#3}{\vspace{\sc@inalign}}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\dvdinlay}
+%    Creates an inlay card for a dvd/slimdvd keepcase. \\
+%    Usage: |\dvdinlay| \marg{text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\dvdinlay}[1]{
+    \inlay{#1}{\sc@dvdkcinletwidth}{\sc@dvdkcinletheight}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\blurayinlay}
+%    Creates an inlay for a Blu-Ray keepcase.
+%    Usage: |\blurayinlay| \marg{text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\blurayinlay}[1]{
+    \inlay{#1}{\sc@brinletwidth}{\sc@brinletheight}
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\djewel}
+%    Creates a two-page jewel case cover. \\
+%    Usage: |\djewel| \marg{first page text} \marg{second page text}
+%    \begin{macrocode}
+\DeclareRobustCommand{\djewel}[2]{
+    \begin{tabular}{|@{}m{\sc@cdjccoverheight}@{}|m{\sc@ircwidth}}
+        \cline{1-1} %
+        \centering%
+        \begin{turn}{270}%
+            \parbox[c]{\sc@cdjccoverwidth-\sc@ircorr}%
+            {\centering #2 \\ \vspace{\sc@djewsalign}}%
+        \end{turn}& \rule{0pt}{\sc@cdjccoverwidth-\sc@ircorr} \\
+        \sc@hfoldline{1-1} %
+        \centering%
+        \begin{turn}{270}%
+            \parbox[c]{\sc@cdjccoverwidth-\sc@ircorr}%
+            {\centering #1 \\ \vspace{\sc@jfcalign}}%
+        \end{turn} & \rule{0pt}{\sc@cdjccoverwidth-\sc@ircorr} \\
+        \cline{1-1}
+    \end{tabular}
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/simplecd/simplecd.ins b/Master/texmf-dist/source/latex/simplecd/simplecd.ins
new file mode 100644
index 00000000000..930379a291e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/simplecd/simplecd.ins
@@ -0,0 +1,53 @@
+%%
+%% Copyright (C) 2010 by Daniel Majoros
+%%
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.2 of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.2 or later is part of all distributions of
+%% LaTeX version 1999/12/01 or later.
+%%
+
+\input docstrip.tex
+\keepsilent
+
+\preamble
+
+This is a generated file.
+
+Copyright (C) 2010 by Daniel Majoros
+
+This file may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.2 of this license or (at your option) any later
+version. The latest version of this license is in:
+
+	http://www.latex-project.org/lppl.txt
+	
+and version 1.2 or later is part of all distributions of
+LaTeX version 1999/12/01 or later.
+
+\endpreamble
+
+\generate{\file{simplecd.sty}{\from{./simplecd.dtx}{package}}}
+
+\obeyspaces
+\Msg{****************************************************}
+\Msg{*                                                  *}
+\Msg{* To finish the installation you have to move the  *}
+\Msg{* following file into a directory searched by TeX: *}
+\Msg{*                                                  *}
+\Msg{* simplecd.sty                                     *}
+\Msg{*                                                  *}
+\Msg{* To produce the documentation run the file        *}
+\Msg{* simplecd.dtx through LaTeX.                      *}
+\Msg{*                                                  *}
+\Msg{* Happy TeXing!                                    *}
+\Msg{*                                                  *}
+\Msg{****************************************************}
+
+\endbatchfile