rm eCards, per author request

git-svn-id: svn://tug.org/texlive/trunk@19331 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 1054 deletions

diff --git a/Master/texmf-dist/source/latex/eCards/eCards.dtx b/Master/texmf-dist/source/latex/eCards/eCards.dtx
deleted file mode 100644
index 1841dc70a05..00000000000
--- a/Master/texmf-dist/source/latex/eCards/eCards.dtx
+++ /dev/null
@@ -1,989 +0,0 @@
-%\iffalse
-%<*copyright>
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%% eCards.sty package,                  2003-3-10       %%
-%% Copyright (C) 1999-2002  D. P. Story                 %%
-%%   dpstory@uakron.edu                                 %%
-%%                                                      %%
-%% This program can redistributed and/or modified under %%
-%% the terms of the LaTeX Project Public License        %%
-%% Distributed from CTAN archives in directory          %%
-%% macros/latex/base/lppl.txt; either version 1 of the  %%
-%% License, or (at your option) any later version.      %%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%</copyright>
-%<package>\NeedsTeXFormat{LaTeX2e}[1997/12/01]
-%<package>\ProvidesPackage{eCards}
-%<package> [2003/05/18 v1.0 eCards: An electronic flash cards package (dps)]
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage[dviwindo,colorlinks,hyperindex]{hyperref}
-%\pdfstringdefDisableCommands{\let\\\textbackslash}
-%\EnableCrossrefs \CodelineIndex
-\begin{document}
-  \GetFileInfo{eCards.sty}
-  \title{eCards: Electronic Flash Cards}
-  \author{D. P. Story\\
-    Email: \texttt{dpstory@uakron.edu}}
-  \date{processed \today}
-  \maketitle
-  \tableofcontents
-  \let\Email\texttt
-  \DocInput{eCards.dtx}
-  \PrintIndex
-\end{document}
-%</driver>
-% \fi
-% \MakeShortVerb{|}
-% \StopEventually{}
-%
-% \DoNotIndex{\def,\edef,\gdef,\xdef,\global,\long,\let}
-% \DoNotIndex{\expandafter,\string,\the,\ifx,\else,\fi}
-% \DoNotIndex{\csname,\endcsname,\relax,\begingroup,\endgroup}
-% \DoNotIndex{\DeclareTextCommand,\DeclareTextCompositeCommand}
-% \DoNotIndex{\space,\@empty,\special}
-%
-%    \begin{macrocode}
-%<*package>
-%    \end{macrocode}
-%
-% \section{Introduction}
-%
-% The initial version of this package was developed at the request of my colleague, Dr.\ Thomas
-% Price, for use in the senior honors project of Ms.\ Katie Jones on
-% \href{http://www.math.uakron.edu/~teprice/Trig/}{Trig Flash Cards}.
-% Upon completion of the honors project, I generalized and extended
-% the original package developed specifically for them.
-%
-% \section{Documentation}
-%
-% In this section, the major elements of this package are highlighted. For those
-% who want to know more, you can peruse the {\LaTeX} code, there are comments
-% contained there as well.
-%
-% \subsection{Preamble: Required Packages and Options}
-%
-% \subsubsection{Required Packages}
-%
-% This package depends heavily on the
-% \textbf{\href{http://www.math.uakron.edu/~dpstory/webeq.html}
-% {Acro\negthinspace\TeX{} eDucation Bundle}}: (1) the \textsf{web}
-% package provides page setup, backgrounds, and navigational
-% elements; (2) the \textsf{exerquiz} package allows you to author
-% the questions, both non-responsive and responsive (fill-in and
-% multiple choice); and (3) the \textsf{insdljs} packages is the
-% mechanism for introducing document-level JavaScripts into the
-% final document.
-%
-% Each of the packages listed above have their own required packages:
-% \textsf{hyperref}, \textsf{color}, \textsf{verbatim}, \textsf{everyshi}
-% and \textsf{eso-pic}. Theses are all available as part of the standard
-% distribution of {\LaTeX} or through any CTAN site.
-%
-% \subsubsection{Options}
-%
-% \paragraph{eCards options.}\hskip-\lastskip\
-% The \textsf{eCards} package really has only 4 options:
-% \begin{enumerate}
-%    \item \texttt{nohints}: If you do not want to provide hints in your eCards,
-%        use this option. See also the comments in \Nameref{hint}.
-%    \item \texttt{listing}:\label{listing} This option gives you a printable version of your
-%        eCards. In this way, you can proofread, check your questions, hints,
-%        and answers. Suggested packages and options are given below:
-%\begin{verbatim}
-%\usepackage[<driver_option>,forpaper,tight,nodirectory]{web}
-%\usepackage[solutionsafter,proofing,preview]{exerquiz}
-%\usepackage[listing]{eCards}
-%\end{verbatim}
-%   \item \texttt{memLogo}: The logo, if any, is read and re-read
-%       for each page on which it appears.  Using this option, the logo
-%    is read once and saved in a box for use.
-%   \item \texttt{custom}: If this option is chosen, the package
-%        will look for and input a file \texttt{eCard.cus}. This file can
-%        be used to customize the environments. This file should be kept
-%        in the source directory, not in the {\LaTeX} search path.
-% \end{enumerate}
-%
-% \paragraph{Other options.}\hskip-\lastskip\
-% Selecting the various options of the \textsf{web} and
-% \textsf{exerquiz} packages can give you different looks.  It is
-% important to be aware of all the options associated with these
-% two package; in the paragraphs below, various options are
-% discussed that may be useful in \textsf{eCards}.
-%
-%\paragraph{Useful Web Package Options.}\hskip-\lastskip\
-% There are three background/panel options: \texttt{usetemplates},
-% \texttt{rightpanel} and \texttt{leftpanel}.  Using the
-% \texttt{usetemplates} option does not give you the vertical
-% navigational strip, but it does give you the background colors;
-% the \texttt{rightpanel} and \texttt{leftpanel} given you a
-% vertical panel on the right and left, respectively.  Use one of
-% these three options only, if any at all. Using none of these three
-% will just get you the default white background.
-%
-%There are certain ``standard'' page designs, or you can create your own using
-%the \cs{margins} and \cs{screensize}; the demo document has
-%\begin{verbatim}
-%\margins{.25in}{.25in}{24pt}{.25in} % left,right,top, bottom
-%\screensize{3.72in}{366.24bp}       % height, width
-%\end{verbatim}
-% See the \textsf{Web} package documentation for details on these and other
-% options.
-%
-% \paragraph{Useful Exerquiz Package Options.}\hskip-\lastskip\
-% If you are not using  multiple choice or fill-in questions, you should use
-% the \texttt{exercisesonly} option. This removes much of the document level JavaScript
-% from the PDF document.
-%
-% For authors that use the full Acrobat~5.0, or the newer Acrobat
-% 6.0 Standard or Acrobat 6.0 Professional, you can use the
-% \texttt{execJS} option. If this option is taken, then when the
-% document is first loaded into Acrobat (following distillation, or
-% creation using \textsf{dvipdfm} or \textsf{pdftex}), the document
-% will be automatically saved; this saves any imported document
-% level JavaScript in the document. The document always needs to be saved
-% after creation so save the scripts with the document, this does it automatically
-% so you can't forget to do it---as one of my colleagues once did.
-%
-% The \texttt{nosolutions} option removes the \texttt{response} environment
-% leaving only the questions. The \texttt{proofing} and \texttt{preview} options
-% can be useful for proofreading, as described in the \texttt{\hyperref[listing]{listing}}
-% option described above.
-%
-% \subsection{\protect\cs{begin\{document\}}: Start creating Cards}
-%
-% The process of creating these electronic cards is quite simple, the sections below
-% describe the various environments used.
-%
-% \subsubsection{The \texttt{card} Environment}
-%
-% The main environment is the \texttt{card} environment, which is used for posing
-% questions, offering a hint, and an answer. The \hypertarget{cardsyntax}{syntax} is
-%\begin{verbatim}
-%\begin{card}
-%   < a question >
-%   \begin{response}
-%       \begin{hint}
-%           < a hint >
-%       \end{hint}
-%       \begin{answer}
-%           < an answer >
-%       \end{answer}
-%   \end{response}
-%\end{card}
-%\end{verbatim}
-% \textcolor{red}{Important.} You can pose a question which requires
-% a verbal response, or one for which there is a choice of
-% alternatives, or a fill-in the blank (math or text). See the demo
-% file \texttt{eCardstst.tex} for examples.
-%
-%   \subsubsection{The \texttt{response} Environment}
-%
-% Immediately following and nested within the \texttt{card} environment is the \texttt{response}
-% environment.  This sets things up for the responses to the question: the hint
-% and the answer.
-%
-%   \subsubsection{The \texttt{hint} Environment}\label{hint}
-%
-% The first environment to appear within the \texttt{response} is
-% the \texttt{hint} environment.  Here you can provide additional
-% information to help the student answer the question successfully.
-% I've you've posed a multiple choice or fill-in question, you can simply
-% copy the multiple choice or fill-in into the hint, just as I have done
-% in the demo file \texttt{eCardstst.tex}.
-%
-% In this release, hints can be provided for \textbf{all} of the questions or for
-% \textbf{none} of the questions. You can enter hints using the
-% \texttt{hint} environment, illustrated \hyperlink{cardsyntax}{above}, or not include a
-% \texttt{hint} environment.  When you do not want to include
-% hints---whether you've entered the environments or not---use the
-% \texttt{nohints} package option. This will convert the
-% \texttt{hint} environment into a \texttt{comments}, and redefined
-% some of the navigational buttons.
-%
-% \subsubsection{\texttt{answer} Environment}
-%
-% After the hint environment comes the answer environment where the answer to the original question
-% can be presented. At the end of this environment, you need to back out of your nest:
-% \verb+\end{answer}+, \verb+\end{response}+ and \verb+\end{card}+.
-%
-% \subsection{\protect\cs{end\{document\}}}
-%
-% \section{Main Code}
-%
-% \subsection{Declare Options}
-%
-% This package builds upon the \textbf{Acro\negthinspace\TeX{} eDucation Bundle}, the options of the
-% \textsf{web} and \textsf{exerquiz} packages can be used with with \textsf{eCards}. Additional options
-% are declared below.
-%    \begin{macro}{memLogo}
-% The logo, if any, is read and re-read for each page on which it appears.  Using this
-% option, the logo is read once and saved in a box for use.
-%    \begin{macrocode}
-\DeclareOption{memLogo}{\let\@memLogo=y}
-\let\@memLogo=n
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{listing}
-% The \texttt{listing} gives a listing of questions, hints, and answers. When used in conjunction
-% with various \textsf{exerquiz} options, this option can be used to review all cards and answers.
-% Suggested options:
-%\begin{verbatim}
-%\usepackage[<driver_option>,forpaper,tight,nodirectory]{web}
-%\usepackage[solutionsafter,proofing,preview]{exerquiz}
-%\usepackage[memLogo,listing]{eCards}
-%\end{verbatim}
-% The boolean switch \cs{ecListing} can be used to get a better looking listing by removing
-% graphics---see the demo file \texttt{eCardstst.tex}.
-%    \begin{macrocode}
-\DeclareOption{listing}{\ecListingtrue}
-\newif\ifecListing \ecListingfalse
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{custom}
-% If this option is chosen, the package will look for and input a file \texttt{eCard.cus}.
-% This file can be used to customize the environments. This file should be kept in the
-% source directory, not in the {\LaTeX} search path.
-%    \begin{macrocode}
-\DeclareOption{custom}{\let\@ecCustom=y}
-\let\@ecCustom=n
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{nohints}
-% In some applications, the author may not want to have hints provided, so, compile
-% the document with the \texttt{nohints} option.
-%    \begin{macrocode}
-\DeclareOption{nohints}
-    {%
-        \let\@ecNoHints=y
-        \def\hintDest{ex.\exnoCard}%
-        \def\solnDest{ex.\exnoCard}%
-    }
-\let\@ecNoHints=n
-\def\hintDest{ex.\exnoCard}%
-\def\solnDest{ex.\exnoCard.s}%
-%    \end{macrocode}
-%    \end{macro}
-% \subsection{ProcessOptions and Required Packages}
-%    \begin{macrocode}
-\ProcessOptions
-\RequirePackage{web}
-\RequirePackage{exerquiz}
-%\RequirePackage{graphicx}
-%    \end{macrocode}
-% \subsection{String Data}
-%    \begin{macro}{\cardsFinishedMsg}
-% When user finishes the cards, a message appears announcing that event. The
-% \cs{cardsFinishedMsg} holds the content of that message.
-%    \begin{macrocode}
-\newcommand{\cardsFinishedMsg}[1]{\def\CARDSFINISHED{#1}}
-\cardsFinishedMsg{You've seen all the cards!}
-%    \end{macrocode}
-%    \end{macro}
-% \subsection{Colors for Backgrounds}
-% Some definitions for coloring the background page for the question page, the
-% hint page and the answer page.
-%    \begin{macrocode}
-\textBgColor{cornsilk}
-\def\cardColor#1{\def\@cardColor{#1}}
-\def\hintColor#1{\def\@hintColor{#1}}
-\def\solnColor#1{\def\@solnColor{#1}}
-%    \end{macrocode}
-% Default colors
-%    \begin{macrocode}
-\cardColor{vlightblue}
-\hintColor{cornsilk}
-\solnColor{webyellow}
-%    \end{macrocode}
-% \subsection{Modifying Exerquiz Environments}
-%    \begin{macrocode}
-\let\web@copyright=\@gobble
-\let\exnoCard=\the@exno
-\let\web@rightheader=\@empty
-\def\io#1{\immediate\write\@auxout{#1}}
-%    \end{macrocode}
-% \subsubsection{Modify the \texttt{exercise} Environment}
-% The \cs{endsolnexerhookaux} macro gets executed just prior to the end of the
-% solution environment, but before the final trailer is written to the .sol file. Here,
-% we use it to insert a navigational bar at the bottom of the solution page.
-%    \begin{macrocode}
-\def\endsolnexerhookaux{%
-    \ifnum\@panelconfig=0\relax
-        \immediate\write\verbatim@out
-            {\string\insNaviBar*{\hfil\string\NextCard\hfil}}%
-    \fi
-}
-\def\include@solutions{%
-    \let\webnewpage=\relax
-    \immediate\closeout\ex@solns
-    \ifeq@nosolutions\else
-        \iftherearesolutions\newpage\markright{\exsecrunhead}%
-            \ifx\webnewpage\relax
-                \def\webnewpage{\let\webnewpage=\newpage}%
-            \fi
-            \eqsolutionshook
-            \addcontentsline{toc}{section}
-                {\protect\numberline{}\exsectitle}%
-            \input{\jobname.sol}%
-        \fi
-    \fi
-}
-%    \end{macrocode}
-% Write the total number of questions (cards) to the aux file.
-%    \begin{macrocode}
-\AtEndDocument{\io{\string\gdef\string\totalCards{\the@exno}}\clearpage}
-%    \end{macrocode}
-% This macro holds the number of cards composed.
-%    \begin{macrocode}
-\def\theNumCards{\csname totalCards\endcsname}
-%    \end{macrocode}
-% \cs{nMarker} identifies the type of page, 0 for a question, 1 for a hint, 2 for a solution
-%    \begin{macrocode}
-\def\nMarker{0}
-%    \end{macrocode}
-% Redefine \cs{ReturnTo} so there is no link, we encourage the user to use the navigational
-% buttons.
-%    \begin{macrocode}
-\def\ReturnTo#1#2{\eq@fititin#2}
-%    \end{macrocode}
-% Miscellaneous macro definitions associated with the \textsf{exercise} environment.
-%    \begin{macrocode}
-\renewcommand\exsecrunhead{}
-\renewcommand\exlabel{}
-\renewcommand\exsectitle{}
-%    \end{macrocode}
-% \subsubsection{Modify the \texttt{shortquiz} Environment}
-%    \begin{environment}{multiChoice}
-% An environment for posing a multiple choice question, based on the \texttt{shortquiz} environment
-% of \textsf{exerquiz}.
-%    \begin{macrocode}
-\newenvironment{multiChoice}[1]
-{%
-    \par\smallskip\def\aftershortquizskip{}%
-    \def\sq@priorhook{}\renewcommand\sqlabel{\@gobble}%
-    \ifnum\nMarker=0\relax
-        \def\sqWrongRespJS{app.alert(\eqsqwgmsg,3);
-            this.gotoNamedDest("\hintDest");}%
-%            this.gotoNamedDest("ex.\exnoCard");}%
-    \fi
-    \begin{shortquiz}
-        \begin{answers}[\solnDest]{#1}%
-%        \begin{answers}[ex.\exnoCard.s]{#1}%
-}%
-{%
-        \end{answers}
-    \end{shortquiz}
-}
-%    \end{macrocode}
-%    \end{environment}
-% \subsubsection{Modify the \texttt{oQuestion} Environment}
-% Set the appearance of any text fields that the author might use.
-%    \begin{macrocode}
-\everyRespBoxTxt{\BG{1 1 1}}\everyRespBoxMath{\BG{1 1 1}}
-%    \end{macrocode}
-%    \begin{environment}{fillIn}
-% The \texttt{fillIn} environment one to pose a fill in type question, either
-% text or math.  Based on the \texttt{oQuestion} environment of \textsf{exerquiz}.
-%    \begin{macrocode}
-\newenvironment{fillIn}
-{%
-    \def\RespBoxTxtOnBlur{ecOnBlurRespBox(retn, \exnoCard, \nMarker);}%
-    \unskip\begin{oQuestion}{\ifnum\nMarker>0\relax
-        \solnDest\else\hintDest\fi}%
-%    \unskip\begin{oQuestion}{ex.\exnoCard\ifnum\nMarker>0.s\fi}%
-}
-{\end{oQuestion}}
-%    \end{macrocode}
-%    \end{environment}
-
-% \subsection{New Environments}
-% \subsubsection{The \texttt{card} Environment}
-%    \begin{environment}{card}
-% This is the main environment for writing questions, hints and answers. This environment
-% encloses all.
-%    \begin{macrocode}
-\newenvironment{card}
-{%
-    \newpage
-    \gdef\nMarker{0}
-    \def\eqexheader{\noindent}
-        \renewcommand\exsllabelformat{\noindent}
-    \renewcommand\exrtnlabelformat{}
-    \renewcommand\exsecrunhead{}
-    \ifnum\@panelconfig=0\relax
-        \def\exersolnheadhook
-            {\string\def\string\solndest{\solnDest}}%
-%            {\string\def\string\solndest{ex.\exnoCard.s}}%
-    \else
-        \def\exersolnheadhook{\string\def\string\exnoCard{\exnoCard}%
-            \string\def\string\solndest{\solnDest}%
-            \string\gdef\string\nMarker
-                {\if\@ecNoHints y2\else1\fi}\string\defineSoln}%
-%            \string\def\string\solndest{ex.\exnoCard.s}%
-%            \string\gdef\string\nMarker{1}\string\defineSoln}%
-    \fi
-    \begin{exercise}
-        \textBgColor{\@cardColor}%
-        \headCard
-}%
-{%
-        \tailCard
-    \end{exercise}%
-    \ifnum\@panelconfig=0\relax\aftergroup\cardNaviBar\fi
-}
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macro}{\headCard}
-% The ``design'' of the ``question'' page. Can re-design.
-%    \begin{macrocode}
-\newcommand{\headCard}
-{%
-    \vspace*{\stretch{.1}}%
-    \begin{center}%
-    \Large\textbf{QUESTION}\par\vspace*{.25in}%
-    \begin{minipage}{.85\linewidth}%
-        \large\unskip\noindent\ignorespaces%
-}
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{\tailCard}
-% Complete any environments begun by \cs{headCard}
-%    \begin{macrocode}
-\newcommand{\tailCard}
-{%
-    \end{minipage}
-    \end{center}
-    \par\vspace{\stretch{2}}%
-}
-%    \end{macrocode}
-%    \end{macro}
-% \subsubsection{The \texttt{response} Environment}
-%    \begin{environment}{response}
-% Nested within the \texttt{card} environment is the
-% \texttt{response} environment, which, in turn, contains the
-% \texttt{hint} and \texttt{answer} environments. This basically
-% the \texttt{solution} environment for an \texttt{exercise} of
-% \textsf{exerquiz}.
-%    \begin{macrocode}
-\newenvironment{response}
-    {\solnexer@woparts[0pt]}{\endsolnexer@woparts}
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{environment}{hint}
-% Right now, a hint is required. Place this environment within the \texttt{response}
-% environment and \textit{before} the \texttt{answer} environment.
-%    \begin{macrocode}
-\newenvironment{hint}
-{%
-    \textBgColor{\@hintColor}%
-    \headHint
-}%
-{%
-    \tailHint
-    \ifnum\@panelconfig=0\relax
-        \insNaviBar{\hfill\hintSoln\ \hintNextCard\hfill}\fi
-    \newpage\gdef\nMarker{2}\noindent\hypertarget{\solndest}{}%
-}
-\if\@ecNoHints y%
-    \let\hint=\comment
-    \let\endhint=\endcomment
-\fi
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macro}{\headHint}
-% The ``design'' of the ``hint'' page. Can re-design.
-%    \begin{macrocode}
-\newcommand{\headHint}
-{%
-    \vspace*{\stretch{.1}}%
-    \begin{center}%
-        \Large\textbf{HINT}\par\vspace*{.25in}%
-        \begin{minipage}{.85\linewidth}%
-        \large\unskip\noindent\ignorespaces%
-}
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{\tailHint}
-% Close any environments begun in \cs{headHint}
-%    \begin{macrocode}
-\newcommand{\tailHint}
-{%
-        \end{minipage}
-    \end{center}
-    \par\vspace{\stretch{2}}%
-}
-%    \end{macrocode}
-%    \end{macro}
-% \subsubsection{The \texttt{answer} Environment}
-%    \begin{environment}{answer}
-% The \texttt{answer} environment follows the \texttt{hint}, also listed within
-% the \texttt{response} environment.
-%    \begin{macrocode}
-\newenvironment{answer}
-{%
-    \textBgColor{\@solnColor}%
-    \headAnswer
-}%
-{%
-    \tailAnswer
-}
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macro}{\headAnswer}
-% The ``design'' of the ``answer'' page. Can re-design.
-%    \begin{macrocode}
-\newcommand{\headAnswer}
-{%
-    \vspace*{\stretch{.1}}%
-    \begin{center}%
-        \Large\textbf{ANSWER} \\\vspace*{.25in}%
-        \begin{minipage}{.85\linewidth}%
-        \large\unskip\noindent\ignorespaces%
-}
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{\tailAnswer}
-% Close any environments opened by \cs{headAnswer}
-%    \begin{macrocode}
-\newcommand{\tailAnswer}
-{%
-        \end{minipage}
-    \end{center}
-    \vspace*{\stretch{2}}
-}
-%    \end{macrocode}
-%    \end{macro}
-% \subsection{Navigational Support}
-% In this section we build navigational support.
-%    \begin{macrocode}
-\def\iconWidth{40pt}\def\iconHeight{15pt}
-%    \end{macrocode}
-%    \begin{macro}{\ecHomePage}
-%    \begin{macro}{\ecLogo}
-%    \begin{macro}{\ecLogoLink}
-% \cs{ecHomePage}, for the `Home' button, and \cs{ecLogo}, for the logo. The argument
-% for \cs{ecLogo} should be a LaTeX graphics command such as \cs{includegraphics}. See
-% the default for an example. With \cs{ecLogoLink}, you can optionally associate a link
-% with your logo.
-%    \begin{macrocode}
-\def\ecHomePage#1{\def\@ecHomePage{#1}}
-\ecHomePage{http://www.math.uakron.edu/\string~dpstory/acrotex.html}
-\def\ecLogo#1{\def\@ecLogo{#1}}
-\ecLogo{\includegraphics[scale=.4]{graphics/uakron}}
-\def\ecLogoLink#1{\def\@ecLogoLink{#1}}
-\let\@ecLogoLink=\@empty
-%    \end{macrocode}
-%    \end{macro}
-%    \end{macro}
-%    \end{macro}
-% \subsubsection{Define JS Actions for Icons}
-% Below are some JavaScript definitions that are used for navigation.
-%    \begin{macrocode}
-\def\makeesc#1{\catcode`#1=0\relax}
-%    \end{macrocode}
-%    \DescribeMacro{\fsJS}\noindent
-% Action for the fullscreen button `FS'.
-%    \begin{macrocode}
-\begin{defineJS}{\fsJS}
-if (app.viewerVersion < 5.0)
-    app.fullscreen = !app.fullscreen
-else
-{
-    app.fs.cursor = cursor.visible;
-    app.fs.defaultTransition = "";
-    app.fs.useTimer = false;
-    app.fs.isFullScreen = !app.fs.isFullScreen;
-}
-\end{defineJS}
-%    \end{macrocode}
-%    \DescribeMacro{\beginJS}
-% This is the JavaScript for the begin button `Begin'.
-%    \begin{macrocode}
-\begin{defineJS}[\makeesc\@]{\beginJS}
-aCardsReviewed = new Array();
-getNextCard();
-this.resetForm();
-var f = this.getField("ex");
-if ( f != null )
-{
-    var g = f.getArray();
-    for (var i = 0; i < g.length; i++)
-        g[i].strokeColor  = @eqDefaultColor;
-}
-\end{defineJS}
-%    \end{macrocode}
-% \subsubsection{Define Nagational Icons}
-% Some navigation icons, \cs{newNaviIcon} is defined in the \textsf{Web Package}.
-%    \begin{macrocode}
-% if  nohint option is used, this is the JS action when hint is clicked.
-\newcommand\noHintJSAction{}
-\newNaviIcon[j]{\Soln}\iconWidth\iconHeight{\footnotesize Soln}
-    {\ifnum\nMarker=2\relax\else
-        this.gotoNamedDest("\solnDest");\fi}
-%        this.gotoNamedDest("ex.\exnoCard.s");\fi}
-\newNaviIcon[j]{\Hint}\iconWidth\iconHeight{\footnotesize Hint}
-    {\if\@ecNoHints y\noHintJSAction
-        \else\ifnum\nMarker=0this.gotoNamedDest("\hintDest");\fi\fi}
-%    {\if\@ecNoHints y\noHintJSAction
-%       \else\ifnum\nMarker=0 this.gotoNamedDest("ex.\exnoCard");\fi\fi}
-\newNaviIcon[j]{\NextCard}\iconWidth\iconHeight{\footnotesize Next}
-    {getNextCard();}
-\newNaviIcon[j]{\hintNextCard}\iconWidth\iconHeight
-    {\footnotesize Next}{getNextCard();}
-\newNaviIcon[j]{\hintSoln}\iconWidth\iconHeight{\footnotesize Soln}
-    {this.gotoNamedDest("\solndest");}
-\newNaviIcon[j]{\Begin}\iconWidth\iconHeight
-    {\footnotesize Begin}{\beginJS}
-\newNaviIcon[l]{\Home}\iconWidth\iconHeight{\footnotesize Home}
-    {\ifnum\arabic{page}=1\relax\def\next{\href{\@ecHomePage}}\else
-    \def\next{\hyperlink{page.1}}\fi\next}
-\newNaviIcon[j]{\FullScreen}\iconWidth\iconHeight
-    {\footnotesize FS}{\fsJS}
-\newNaviIcon[j]{\Close}\iconWidth\iconHeight{\footnotesize Close}
-    {app.execMenuItem("Close")}
-%    \end{macrocode}
-% If \cs{@memLogo} has a value of `y', then the logo is put in a box and copied
-% onto each page; otherwise, the logo is read from its file on each page.
-%    \begin{macrocode}
-\edef\@@Logo{\if\@memLogo y\relax
-    \noexpand\unhcopy\noexpand\Logo\else\noexpand\@ecLogo\fi}
-%    \end{macrocode}
-% Build the button panel for the navigational bar. Can re-design as desired.
-%    \begin{macrocode}
-\ifnum\@panelconfig>0\relax
-%    \end{macrocode}
-% if \cs{@panelconfig} (a macro defined in \textsf{web}, is positive, then the author has chosen
-% a left or a right navigational panel. So, we must build a panel.
-%    \begin{macro}{\panelNaviGroup}
-% This is the group of panel buttons used for navigational purposes.
-%    \begin{macrocode}
-    \renewcommand\panelNaviGroup
-    {%
-        \def\iconWidth{28pt}
-        \ifnum\thepage=1\relax
-            \parbox[c]{58pt}
-            {%
-                \Begin\hfil\FullScreen\\
-                \Close\hfil\Home
-            }%
-            \else
-            \parbox[c]{58pt}
-            {%
-                {\ifnum\nMarker>0\relax
-                    \navibarTextColor{lightblue}\fi
-                 \if\@ecNoHints y\relax
-                    \navibarTextColor{lightblue}\fi\Hint}\hfil
-                {\ifnum\nMarker=2\relax
-                    \navibarTextColor{lightblue}\fi\Soln}\\
-                \NextCard\hfil\Home
-            }%
-        \fi
-    }
-%    \end{macrocode}
-%    \end{macro}
-% If \cs{@memLogo} is `y', create a new box, read logo with \cs{@ecLogo}, and store
-% in box
-%    \begin{macrocode}
-    \newbox\Logo
-    \if\@memLogo y\relax
-        \AtBeginDocument{\global\setbox\Logo = \hbox{\@ecLogo}}
-    \fi
-%    \end{macrocode}
-%    \begin{macro}{\buildpanel}
-% The \cs{buildpanel} command is defined in the \textsf{Web Package} and determines the layout of
-% the vertical navigational panel. You can re-design your own.
-%    \begin{macrocode}
-    \buildpanel
-    {%
-        \ifx\@ecLogoLink\@empty\@@Logo
-        \else\href{\@ecLogoLink}{\@@Logo}\fi
-        \par\vspace{\stretch{1}}%
-        \rotatebox{-90}{\aebLogo}%
-        \par\vspace{\stretch{1}}%
-        \panelNaviGroup
-    }
-%    \end{macrocode}
-%    \end{macro}
-% Delay the expansion of the \cs{newNaviIcon} macro for the solution page
-%    \begin{macrocode}
-    \def\defineSoln{\newNaviIcon[j]{\Soln}\iconWidth\iconHeight
-        {\footnotesize Soln}{this.gotoNamedDest("\solndest");}
-        \def\sqWrongRespJS{app.alert(\eqsqwgmsg,3);
-            this.gotoNamedDest("\solndest");}%
-    }
-\else
-%    \end{macrocode}
-%    \begin{macro}{\cardNavibar}
-% \cs{@panelconfig} must be zero, the author does not want a navigational panel, so well
-% put buttons at the bottom of each page to navigate by.
-% Standard navigational bar.
-%    \begin{macrocode}
-    \def\cardNaviBar{\insNaviBar{\hfill
-        \if\@ecNoHints n\Hint\ \fi\Soln\ \NextCard \ \Home\hfill}%
-    }
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macrocode}
-\fi
-%    \end{macrocode}
-% \subsection{Document Level JavaScript}
-% Insert document level JavaScripts to get the functionality of randomly selected questions.
-%
-% \smallskip\noindent If author has used the \texttt{nodljs} or \texttt{exercises} only, then
-% we need to turn the \textsf{insdljs} package back on by emitting
-%    \begin{macrocode}
-\let\importdljs=y
-%    \end{macrocode}
-% This is the JavaScript to control the eCards action. Some global variables followed by the
-% \texttt{getNextCard()} method.
-%    \begin{macrocode}
-\begin{insDLJS}[isCardloaded]{flashcrd}{Flash Card JS}
-var isCardloaded=true;
-var maxNumberCards = 100;
-var aCardsReviewed = new Array();
-var cardsFinished = "\CARDSFINISHED";
-function getNextCard()
-{
-    numCards = \theNumCards;
-    var nCardsReviewed = aCardsReviewed.length;
-    if ( nCardsReviewed == numCards )
-    {
-        app.alert(cardsFinished,3);
-        this.gotoNamedDest("page.1");
-    }
-    else
-    {
-        var look4Next = true;
-        while (look4Next)
-        {
-            var nextCard = Math.random();
-            nextCard *= maxNumberCards;
-            nextCard = Math.ceil(nextCard);
-            nextCard \%= numCards;
-            nextCard += 1;
-            for ( var i = 0; i < nCardsReviewed; i++)
-                if ( aCardsReviewed[i] == nextCard ) break;
-            if ( i == nCardsReviewed ) look4Next = false;
-        }
-        aCardsReviewed.push(nextCard);
-        this.gotoNamedDest("qex."+nextCard);
-    }
-}
-%    \end{macrocode}
-% We also define a function \texttt{ecOnBlurRespBox()} to
-% correctly control the page changes: If a wrong answer is given, then we go to
-% the hint or the solution depending on whether user is responding to the original
-% question or to the hint.
-%    \begin{macrocode}
-function ecOnBlurRespBox (retn, exnoCard, nMarker)
-{
-    if (retn != null) {
-        if (retn) {
-            app.alert(\eqsqrtmsg,3);
-            var dest = "ex." + exnoCard + ".s";
-            this.gotoNamedDest(dest);
-        }
-        else {
-            app.alert(\eqsqwgmsg,3);
-            if (nMarker==0) {
-                var dest = "ex." + exnoCard;
-                this.gotoNamedDest(dest);
-            }
-            else {
-                var dest = "ex." + exnoCard + ".s";
-                this.gotoNamedDest(dest);
-            }
-        }
-    }
-    else {
-        var str = event.target.value.toString();
-        if (str.replace(/\s/g,"") == "")
-        event.target.strokeColor = \eqDefaultColor;
-    }
-}
-\end{insDLJS}
-%    \end{macrocode}
-% This requires the document author to be using the full Acrobat 5.0 or greater, not
-% just the Adobe Reader.
-%    \begin{macrocode}
-\begin{execJS}{execjs}
-app.execMenuItem("Save");
-\end{execJS}
-%    \end{macrocode}
-% If we have the \texttt{listing} option taken, then we import the \texttt{eCardsList.def}
-% file to redefine portions of the \texttt{card} environment.
-% just the Adobe Reader.
-%    \begin{macrocode}
-\ifecListing
-    \input{eCardsList.def}
-\fi
-%    \end{macrocode}
-% If document author  wants to modify these environments, s/he can place redefinitions in
-% \texttt{eCard.cus}.
-%    \begin{macrocode}
-\if\@ecCustom y\InputIfFileExists{eCard.cus}{}{}\fi
-%</package>
-%    \end{macrocode}
-% \subsection{Support for the \texttt{listing} option}
-% When the \texttt{listing} option is taken, we list out the questions, hints, and answers.
-% In this section, a number of environments and commands are defined, the name of each
-% begin with `\texttt{listing@}'. The document author can \cs{renewcommand} there to
-% create a printed listing of easy review. If you say
-%\begin{verbatim}
-%\usepackage[dvipsone,forpaper,tight,nodirectory]{web}
-%\usepackage[execJS,solutionsafter,proofing,preview]{exerquiz}
-%\usepackage[memLogo,listing]{eCards}
-%\end{verbatim}
-% then the multiple choice and fill-in questions will display the correct answers. Place any
-% customizations in a text field named \texttt{eCards.cus}, and use the \texttt{custom}
-% option.
-% \subsubsection{The \texttt{card} Environment}
-%    \begin{macrocode}
-%<*listing>
-%    \end{macrocode}
-%    \begin{environment}{card}
-% This is the main environment for writing questions, hints and answers. This environment
-% encloses all.
-%    \begin{macrocode}
-\newcounter{ecCnt}
-\renewcommand\exsolafter{}
-\eqexerskip{0pt}
-\newenvironment{listing@card}
-{%
-    \stepcounter{ecCnt}%
-    \gdef\nMarker{0}%
-    \def\eqexheader{\noindent}%
-        \renewcommand\exsllabelformat{\noindent}%
-    \renewcommand\exrtnlabelformat{}%
-    \renewcommand\exsecrunhead{}%
-    \begin{exercise}%
-        \textBgColor{\@cardColor}%
-        \headCard
-}%
-{%
-        \tailCard
-    \end{exercise}%
-}
-%\let\card = \listing@card
-%\let\endcard = \endlisting@card
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macro}{\headCard}
-% The ``design'' of the ``question'' page. Can re-design.
-%    \begin{macrocode}
-\newcommand{\listing@headCard}
-{%
-    \unskip\makebox[0pt][r]
-        {\textbf{\arabic{ecCnt}.\enspace}}\ignorespaces%
-}
-%\let\headCard = \listing@headCard
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{\tailCard}
-% Complete any environments begun by \cs{headCard}
-%    \begin{macrocode}
-\newcommand{\listing@tailCard}{\par}
-%\let\tailCard = \listing@tailCard
-%    \end{macrocode}
-%    \end{macro}
-% \subsubsection{The \texttt{response} Environment}
-%    \begin{environment}{response}
-% Nested within the \texttt{card} environment is the
-% \texttt{response} environment, which, in turn, contains the
-% \texttt{hint} and \texttt{answer} environments. This basically
-% the \texttt{solution} environment for an \texttt{exercise} of
-% \textsf{exerquiz}.
-%    \begin{macrocode}
-\newenvironment{listing@response}
-    {\solnexer@woparts[0pt]}{\endsolnexer@woparts}
-%\let\headresponse = \listing@response
-%\let\endresponse = \listing@response
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{environment}{hint}
-% Right now, a hint is required. Place this environment within the \texttt{response}
-% environment and \textit{before} the \texttt{answer} environment.
-%    \begin{macrocode}
-\newenvironment{listing@hint}
-{%
-    \textBgColor{\@hintColor}%
-    \headHint
-}%
-{%
-    \tailHint
-}
-%\let\headhint = \listing@hint
-%\let\endhint = \listing@endhint
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macro}{\headHint}
-% The ``design'' of the ``hint'' page. Can re-design.
-%    \begin{macrocode}
-\newcommand{\listing@headHint}
-{%
-    \unskip\par\textit{Hint}:\space\ignorespaces
-}
-%\let\headHint = \listing@headHint
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macro}{\tailHint}
-% Close any environments begun in \cs{headHint}
-%    \begin{macrocode}
-\newcommand{\listing@tailHint}{}
-%\let\tailHint = \listing@tailHint
-%    \end{macrocode}
-%    \end{macro}
-% \subsubsection{The \texttt{answer} Environment}
-%    \begin{macro}{\headAnswer}
-% The ``design'' of the ``answer'' page. Can re-design.
-%    \end{macro}
-%    \begin{environment}{answer}
-% The \texttt{answer} environment follows the \texttt{hint}, also listed within
-% the \texttt{response} environment.
-%    \begin{macrocode}
-\newenvironment{listing@answer}
-{%
-    \textBgColor{\@solnColor}%
-    \headAnswer
-}%
-{%
-    \tailAnswer
-}
-%\let\answer = \listing@answer
-%\let\endanswer = \listing@endanswer
-%    \end{macrocode}
-%    \end{environment}
-%    \begin{macrocode}
-\newcommand{\listing@headAnswer}
-{%
-    \unskip\par\textit{Answer}:\space\ignorespaces
-}
-%\let\headAnswer = \listing@headAnswer
-%    \end{macrocode}
-%    \begin{macro}{\tailAnswer}
-% Close any environments opened by \cs{headAnswer}
-%    \begin{macrocode}
-\newcommand{\listing@tailAnswer}{}
-%\let\tailAnswer = \listing@tailAnswer
-%    \end{macrocode}
-%    \end{macro}
-%    \begin{macrocode}
-\AtBeginDocument{%
-    \let\card = \listing@card
-    \let\endcard = \endlisting@card
-    \let\headCard = \listing@headCard
-    \let\tailCard = \listing@tailCard
-    \let\headresponse = \listing@response
-    \let\endresponse = \listing@response
-    \let\headhint = \listing@hint
-    \let\endhint = \listing@endhint
-    \let\headHint = \listing@headHint
-    \let\tailHint = \listing@tailHint
-    \let\answer = \listing@answer
-    \let\endanswer = \listing@endanswer
-    \let\headAnswer = \listing@headAnswer
-    \let\tailAnswer = \listing@tailAnswer
-}
-%</listing>
-%    \end{macrocode}
-\endinput
diff --git a/Master/texmf-dist/source/latex/eCards/eCards.ins b/Master/texmf-dist/source/latex/eCards/eCards.ins
deleted file mode 100644
index 69000e6cfd6..00000000000
--- a/Master/texmf-dist/source/latex/eCards/eCards.ins
+++ /dev/null
@@ -1,65 +0,0 @@
-%%

-%% This file will generate fast loadable files and documentation

-%% driver files from the doc files in this package when run through

-%% LaTeX or TeX.

-%%

-%% Copyright 1999-2002 D. P. Story

-%%

-%% This file is part of the `Web and Exerquiz Distribution'.

-%% -------------------------------------------

-%%

-%% It may be distributed under the conditions of the LaTeX Project Public

-%% License, either version 1.2 of this license or (at your option) any

-%% later version.  The latest version of this license is in

-%%    http://www.latex-project.org/lppl.txt

-%% and version 1.2 or later is part of all distributions of LaTeX

-%% version 1999/12/01 or later.

-%%

-%% --------------- start of docstrip commands ------------------

-%%

-\def\filedate{2001/05/26}

-\def\batchfile{eCards.ins}

-%

-% If you can assume that the target audience for the document all have

-% Acrobat Reader 5.0 or later, then chance the following switch to true,

-% else, leave it as false.

-

-\input docstrip

-\ifx\generate\undefined

-  \Msg{**********************************************}

-  \Msg{*}

-  \Msg{* This installation requires docstrip}

-  \Msg{* version 2.4 or later.}

-  \Msg{*}

-  \Msg{* An older version of docstrip has been input}

-  \Msg{*}

-  \Msg{**********************************************}

-  \errhelp{Move or rename old docstrip.tex and get a newer one.}

-  \errmessage{Old docstrip in input path}

-  \batchmode

-  \csname @@end\endcsname\end

-\fi

-

-\keepsilent

-\askforoverwritefalse

-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

-

-\preamble

-\endpreamble

-

-\generate

-{%

-    \file{eCards.sty}{\from{eCards.dtx}{copyright,package}}

-    \file{eCardsList.def}{\from{eCards.dtx}{copyright,listing}}

-}

-

-\Msg{***************************************************************}

-\Msg{*}

-\Msg{* \space To finish the installation you have to copy the files }

-\Msg{*}

-\Msg{* \space *.sty, *.cfg and *.def into a directory searched by TeX}

-\Msg{*}

-\Msg{***************************************************************}

-

-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

-\endinput