trunk/Master/texmf-dist/source/latex/minutes

git-svn-id: svn://tug.org/texlive/trunk@391 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 3207 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/minutes/blindtext.dtx b/Master/texmf-dist/source/latex/minutes/blindtext.dtx
new file mode 100644
index 00000000000..e37f2f12712
--- /dev/null
+++ b/Master/texmf-dist/source/latex/minutes/blindtext.dtx
@@ -0,0 +1,686 @@
+% ^^A CTAN:macros/latex/contrib/supported/minutes
+\def\fileversion{V1.4}
+\def\filedate{2003/12/14}
+% ^^A For index and changes, run:
+% ^^A makeindex -s gglo -o blindtext.gls blindtext.glo
+% ^^A makeindex -s gind -o blindtext.ind blindtext.idx
+%
+% \CheckSum{451}
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+% \DoNotIndex{\" , \-, \flqq,\frqq, \ ,\def, \begin, \end}
+% \DoNotIndex{\csname,\endcsname, \expandafter, \global, \newcommand}
+% \DoNotIndex{\advance, \filedate, \fileversion, \MessageBreak}
+% \DoNotIndex{\newcount, \newcounter, \newif, \or}
+% \DoNotIndex{\if, \else, \fi, \ifcase, \ifdefined, \ifnum, \ifx, \loop, \repeat}
+% \DoNotIndex{\heartsuit}
+% \DoNotIndex{\NeedsTeXFormat, \providecommand, \ProvidesPackage, \relax, \RequirePackage}
+% \DoNotIndex{\par, \chapter, \section, \subsection, \subsubsection, \paragraph, }
+% \DoNotIndex{\selectlanguage, \stepcounter, \ss, \space, \setcounter}
+% \DoNotIndex{\value, \typeout, \long, \renewcommand}
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+%\documentclass{refart}
+%\usepackage{doc}
+\usepackage[german,english]{babel}
+\usepackage{blindtext}
+\usepackage{makeidx}
+\IfFileExists{hyperref.sty}{\usepackage{hyperref}}{}
+\CodelineIndex
+\makeindex
+%\OnlyDescription
+\begin{document}
+ \DocInput{Blindtext.dtx}
+\end{document}
+%</driver>
+%
+%<*package>
+% \fi
+%
+% \newcommand*{\Lpack}[1]{\textsf {#1}}           ^^A typeset a package
+% \newcommand*{\Lenv}[1]{\texttt {#1}}           ^^A typeset a package
+%
+% \title{Blindtext.sty:\\
+%   Creating text for testing/
+%   Texterzeugung zum testen}
+%
+% \author{Knut Lickert\\knut@lickert.net}
+% \maketitle
+%
+%\begin{abstract}
+%\selectlanguage{english}
+%This packet create text with the commands \verb|\blindtext| and
+%\verb|\Blindtext|.
+%With this created text you can get an impression of the look
+%of new classes and packages.
+%
+%\selectlanguage{german}
+%Mit diesem Paket kann man lange Texte erzeugen, ohne lange
+%Texte einzugeben.
+%Sinn ist die Erzeugung langer Beispieltexte, ohne den
+%Quelltext lang zu machen.
+%\end{abstract}
+%
+%\selectlanguage{english}
+%\section{Overview/{\"U}bersicht}
+%\subsection{The commands/Die Kommandos}
+%\begin{figure}
+%\renewcommand{\arraystretch}{1.1}
+%\begin{tabular}{p{0.3\textwidth}*{2}{p{0.3\textwidth}}}\hline
+%Command/Makro       & englisch      & german    \\\hline
+%\verb|\blinddocument|   & creates a document  & erzeugt ein Dokument\\
+%\verb|\Blinddocument|   & creates a big document  & erzeugt ein gro{\ss}es Dokument\\
+%\verb|\blindtext|   & creates text  & erzeugt Text\\
+%\verb|\Blindtext|   & creates more text & erzeugt mehr Text\\
+%\verb|\blindlist{env}|   & creates a list  & erzeugt eine Liste\\
+%\verb|\blindlistoptional|\newline\hspace*{2em}\verb|{env}|   & creates a list with \verb|\item[]|  & erzeugt eine Liste mit \verb|\item[]|\\
+%\verb|\blindlistlist[level]{env}|   & creates cascaded lists  & erzeugt geschachtelte Listen\\
+%\verb|\Blindlist{env}|   & creates a big list  & erzeugt eine gro{\ss}e Liste\\
+%\verb|\Blindlistoptional|\newline\hspace*{2em}\verb|{env}|   & creates a big list with \verb|\item[]|  & erzeugt eine gro{\ss}e Liste mit \verb|\item[]|\\
+%\verb|\blinditemize|   & creates an itemize list  & erzeugt eine itemize-Liste\\
+%\verb|\blindenumerate|   & creates an enumerate list  & erzeugt eine enume\-ra\-te-Liste\\
+%\verb|\blinddescription|   & creates a description list  & erzeugt eine des\-crip\-tion-Liste\\\hline
+%$\sim$[x]   & repetition & Wiederholungsfaktor\\
+% ^^A%\verb|\lovetext|   & I love you in different languages & mehrsprachig: Ich liebe dich\\
+%\end{tabular}
+%\caption{Command Overview}
+%\end{figure}
+%
+% \DescribeMacro{\blinddocument}
+% {\verb|\blinddocument|} create a document with sections,
+% subsections\ldots and lists (\Lenv{itemize},
+% \Lenv{enumerate} and \Lenv{description}).
+% \DescribeMacro{\Blinddocument}
+% {\verb|\Blinddocument|} create a
+% document with bigger sections, subsections\ldots and longer
+% lists.\par
+%
+% The smallest document to check the look of a class would be:
+% \begin{quote}
+% \begin{verbatim}
+% \documentclass{<class>}
+% \usepackage{blindtext}
+% \begin{document}
+%     \blinddocument
+% \end{document}
+% \end{verbatim}
+% \end{quote}
+%
+% \DescribeMacro{\blindtext}
+% \verb|\blindtext[x]| create a text. The optional parameter defines a
+% repetition. Default for the repetition is one and can be modified
+% with \verb|\setcounter{blindtext}{1}|.
+%
+% \DescribeMacro{\Blindtext}
+% {\verb|\Blindtext[x][y]|} create $x$ paragraphs with the text of
+% {\verb|\blindtext|}. The first optional parameter defines a
+% repetition of the paragraphs. Default for the repetition is five
+% and can be modified with \verb|\setcounter{Blindtext}{5}|. The
+% second optional parameter is given to \verb|\blindtext|.
+%
+% It is possible to add a start and end sequence for each paragraph.
+%
+% \DescribeMacro{\parstart}
+% \DescribeMacro{\parend}
+% The two macros \verb|\parstart| and \verb|\parend| define a
+% starting and ending sequence for each paragraph in
+% \verb|\Blindtext|.
+%
+% \DescribeMacro{\blindlist}
+% {\verb|\blindlist{env}[x]|} create a list, the type is defined by the
+% obligatory parameter. The optional parameter defines a repetition.
+% Default for the repetition is five and can be modified with
+% \verb|\setcounter{blindlist}{x}|.
+%
+% \DescribeMacro{\blindlistlist}
+%  {\verb|\blindlistlist[level]{env}[x]|} creates cascaded lists up to
+%  level \verb|level|, the type is defined by the second obligatory
+%  parameter. The optional parameter defines a repetition. Default is the
+%  same like in \verb|\blindlist|.
+%
+% \DescribeMacro{\Blindlist}
+% \verb|\Blindlist{env}[x]| create a list with long texts. The optional parameter defines a
+% repetition. Default for the repetition is five and can be modified
+% with \verb|\setcounter{blindlist}{x}|.
+%
+% \DescribeMacro{\blindlistoptional}
+% {\verb|\blindlistoptional{env}[x]|} create a list with \verb|\item[]|. The
+% list is defined by the obligatory parameter. The optional
+% parameter defines a repetition. Default for the repetition is five
+% and can be modified with \verb|\setcounter{blindlist}{x}|.
+%
+% \DescribeMacro{\Blindlistoptional}
+% \verb|\Blindlistoptional| create a list like
+% \verb|\blindlistoptional| with long texts.
+%
+% \DescribeMacro{\blinditemize}     \DescribeMacro{\Blinditemize}
+% \DescribeMacro{\blindenumerate}   \DescribeMacro{\Blindenumerate}
+% \DescribeMacro{\blinddescription} \DescribeMacro{\Blinddescription}
+% This commands are a abbreviation for \verb|\blindlist{itemize}|, \verb|\blindlist{enumerate}|
+% and \verb|\blindlist{description}|.
+%
+% \StopEventually
+%
+% \selectlanguage{english}
+% \section{Implementation/Implementierung}
+%
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{blindtext}[\filedate\space\fileversion\space%
+                 blindtext-Package]
+\typeout{Minutes-Package}
+\RequirePackage{xspace}
+%    \end{macrocode}
+% Just in case the french quote are not defined
+%    \begin{macrocode}
+\providecommand{\frqq}{}
+\providecommand{\flqq}{}
+%    \end{macrocode}
+%
+% First we need some counters for the number of repetitions of the
+% text and the paragraphs.
+%    \begin{macrocode}
+\newcounter{blindtext}\setcounter{blindtext}{1}
+\newcounter{Blindtext}\setcounter{Blindtext}{5}
+%    \end{macrocode}
+%
+%    \begin{macro}{\blindtext}
+%
+% \verb|\blindtext[x]| write $x\times$ a sentence.
+% The default is stored in the counter \verb|blindtext|. This value
+% can be changed with \verb|\setcounter{blindtext}{1}|.
+%
+%    \begin{macrocode}
+\newcommand{\blindtext}[1][\value{blindtext}]{
+\newcount\xx\xx=1
+\loop
+\blindtext@text
+\ifnum\xx<#1\advance\xx by 1
+\repeat
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\Blindtext}
+% \verb|\Blindtext[x][y]| execute $x\times$\verb|\blindtext[y]|. Each
+% \verb|\blindtext[y]| built a paragraph.
+% The default is stored in the counter \verb|Blindtext|. This value
+% can be changed with \verb|\setcounter{Blindtext}{5}|.
+% The counter \verb|blindtext@numBlindtext| stores the first
+% optional parameter to be used in \verb|\blindtext@Blindtext|.
+%    \begin{macrocode}
+\newcount\blindtext@numBlindtext
+\newcommand{\Blindtext}[1][\value{Blindtext}]{
+\blindtext@numBlindtext=#1
+\blind@Blindtext}
+%    \end{macrocode}
+%    \end{macro} %^^ABlindtext
+%
+% \begin{macro}{\blind@Blindtext}
+% This macro continue \verb|\Blindtext| with a second optional parameter.
+%
+% Each paragraph starts and end with a text, which can be defined with
+% \verb|\starttext| or \verb|\endtext|.
+%    \begin{macrocode}
+\newcommand{\blind@Blindtext}[1][\value{blindtext}]{
+\newcount\yy\yy=1
+\loop
+{\blindtext@parstart\blindtext[#1]\blindtext@parend\par}
+\ifnum\yy<\blindtext@numBlindtext\advance\yy by 1
+\repeat
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blind@Blindtext}
+%
+% \begin{macro}{\parstart}
+% \begin{macro}{\parend}
+%    \begin{macrocode}
+\newcommand{\blindtext@parstart}{}   %Text at start of paragraph
+\newcommand{\blindtext@parend}{}     %Text at end   of paragraph
+\newcommand{\parstart}[1]{\renewcommand{\blindtext@parstart}{#1}}
+\newcommand{\parend}[1]{\renewcommand{\blindtext@parend}{#1}}
+%    \end{macrocode}
+% \end{macro}%^^A{\parstart}
+% \end{macro}%^^A{\parend}
+%
+% \section{Lists}
+% Here I define some flags to decide in the lists, if we have to
+% create big items and if we need the optional parameter at
+% \verb|\item|. This flags are reset in \verb|\blind@list|.\par
+% The counter \verb|blindlist| define the default number of items in a list.
+% The counter \verb|blindlistitem| is needed by \verb|\blindtext@count|
+% to write a text like 'first', 'second'\ldots.
+%    \begin{macrocode}
+\newif\ifblind@long\blind@longfalse
+\newif\ifblind@optional\blind@optionalfalse
+\newcounter{blindlist}
+\newcounter{blindlistlevel}%Up tu X level
+\newcounter{blindlist@level}%internal counter
+\newcount\blind@listitem
+%    \end{macrocode}
+%
+% \begin{macro}{\blindlist}
+% \begin{macro}{\blind@listtype}
+% \verb|\blindlist{env}[x]| write a env-list with $x$ items.
+% The default is stored in the counter \verb|blindlist|. This value
+% can be changed with \verb|\setcounter{blindlist}{1}|.
+% The type of list is stored in \verb|\blind@listtype|.
+%    \begin{macrocode}
+%% ^^A-----------------------------------------------------------
+\newcommand{\blindlist}[1]{
+\def\blind@listtype{#1}
+\setcounter{blind@levelcount}{1}
+\blind@list
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blindlist}
+% \end{macro}%^^A{\blind@listtype}
+%
+% \begin{macro}{\blind@list}
+% This macro continue the macro \verb|\blindlist| and with the
+% optional parameter. After the printout, we reset the flags and the
+% counter for the list text.
+%    \begin{macrocode}
+\newcommand{\blind@list}[1][5]{
+\setcounter{blindlist}{#1}
+\addtocounter{blindlist@level}{1}%depth of list
+\blind@listitem=1
+\begin{\blind@listtype}
+\blind@items
+\end{\blind@listtype}
+\blind@longfalse
+\blind@optionalfalse
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blind@list}
+%
+% \begin{macro}{\blindlistlist}
+% \verb|\blindlistlist[num]{env}[x]| writes cascaded lists up to level num.
+%    \begin{macrocode}
+\newcommand{\blindlistlist}[2][4]{
+\setcounter{blindlistlevel}{#1}
+\setcounter{blindlist@level}{0}%deepest reached level
+\setcounter{blind@levelcount}{1}%actual level for printout
+\def\blind@listtype{#2}
+\blind@list
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blindlistlist}
+% \begin{macro}{\blindlistlistoptional}
+% Like \verb|\blindlistlist[num]{env}[x]| but for environment with optional parameters.
+%    \begin{macrocode}
+\newcommand{\blindlistlistoptional}{
+\blind@optionaltrue
+\blindlistlist
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blindlistlistoptional}
+%
+% \begin{macro}{\blinditemize}
+% \begin{macro}{\blindenumerate}
+% Some default macros for the standard environments.
+%    \begin{macrocode}
+\newcommand{\blinditemize}{\blindlist{itemize}}
+\newcommand{\blindenumerate}{\blindlist{enumerate}}
+%    \end{macrocode}
+% \end{macro}%^^A{\blinditemize}
+% \end{macro}%^^A{\blindenumerate}
+%
+% \verb|\Blindlist[x]| write a list with $x$ items.
+% The default is stored in the counter \verb|blindlist|. This value
+% can be changed with \verb|\setcounter{blindlist}{1}|.
+%
+%
+% \begin{macro}{\Blindlist}
+%    \begin{macrocode}
+\newcommand{\Blindlist}[1]{
+\blind@longtrue
+\blindlist{#1}
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\Blindlist}
+%
+% \begin{macro}{\Blinditemize}
+% \begin{macro}{\Blindenumerate}
+% Some default macros for the standard environments.
+%    \begin{macrocode}
+\newcommand{\Blinditemize}{\Blindlist{itemize}}
+\newcommand{\Blindenumerate}{\Blindlist{enumerate}}
+%    \end{macrocode}
+% \end{macro}%^^A{\Blinditemize}
+% \end{macro}%^^A{\Blindenumerate}
+%
+% \begin{macro}{\blindlistoptional}
+% Here we start a list with \verb|\item[]|. So we set the flag for optional
+% parameter and start the normal list.
+%    \begin{macrocode}
+\newcommand{\blindlistoptional}[1]{
+\blind@optionaltrue
+\blindlist{#1}
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blindlistoptional}
+%
+% \begin{macro}{\Blindlistoptional}
+% Now a big list with optional parameter at \verb|\item|.
+%    \begin{macrocode}
+\newcommand{\Blindlistoptional}[1]{
+\blind@optionaltrue
+\blind@longtrue
+\blindlist{#1}
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blindlistoptional}
+%
+% \begin{macro}{\blinddescription}
+% \begin{macro}{\Blinddescription}
+% Some default macros for the standard environment description.
+%    \begin{macrocode}
+\newcommand{\blinddescription}{\blindlistoptional{description}}
+\newcommand{\Blinddescription}{\Blindlistoptional{description}}
+\newcounter{listcount}
+\newcounter{blind@levelcount}
+%    \end{macrocode}
+% \end{macro}%^^A{\blinddescription}
+% \end{macro}%^^A{\Blinddescription}
+%
+% \begin{macro}{\blind@items}
+% Here the \verb|\item| are written.
+% A local counter is defined and the \verb|\item| is written. The
+% type of \verb|\item| is influenced by the flags.
+%    \begin{macrocode}
+\newcommand{\blind@items}{
+\setcounter{listcount}{1}
+\loop
+\ifblind@optional
+    \ifblind@long
+        \item[\blindtext@countitem] \blindtext@text
+    \else
+        \item[\blindtext@count] \blindtext@item
+    \fi
+\else%\blind@optionalfalse
+    \ifblind@long
+        \item \blindtext@text
+    \else
+        \item \blindtext@countitem
+    \fi
+\fi%\ifblind@optional
+%    \end{macrocode}
+% Loop for cascaded lists.
+% \changes{V1.3}{2003-05-18}{Cascaded lists}
+%    \begin{macrocode}
+{\loop
+    \ifnum\value{blindlistlevel}>\value{blindlist@level}
+    \addtocounter{blind@levelcount}{1}
+    \blind@list[\value{blindlist}]\relax
+    \addtocounter{blind@levelcount}{-1}
+    \setcounter{listcount}{1}
+\repeat}
+\ifnum\value{listcount}<\value{blindlist}\addtocounter{listcount}{1}
+%    \end{macrocode}
+% Correction for nested values.
+%    \begin{macrocode}
+%    \end{macrocode}
+% Close the loop
+%    \begin{macrocode}
+\repeat
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\blind@item}
+%% ^^A-----------------------------------------------------------
+% \section{A sample document}
+%    \begin{macro}{\blinddocument}
+% \verb|\blinddocument| adds a document with \verb|\chapter|,
+% \verb|\section|\ldots, texts and lists (itemize, enumerate,
+% description).
+%    \begin{macrocode}
+\newcommand{\blinddocument}{
+\@ifundefined{chapter}{}{%
+    \chapter{\blindtext@heading 0 (chapter)}\blindtext%
+    }
+\section{       \blindtext@heading 1 (section)}     \blindtext
+\subsection{    \blindtext@heading 2 (subsection)}  \blindtext
+\subsubsection{ \blindtext@heading 3 (subsubsection)}  \blindtext
+\paragraph{     \blindtext@heading 4 (paragraph)}   \blindtext
+\section{\blindtext@list}
+\subsection{\blindtext@listEx (itemize)}
+    \blinditemize
+    \subsubsection{\blindtext@listEx (4*itemize)}
+    \blindlistlist{itemize}[2]
+\subsection{\blindtext@listEx (enumerate)}
+    \blindenumerate
+    \subsubsection{\blindtext@listEx (4*enumerate)}
+    \blindlistlist{enumerate}[2]
+\subsection{\blindtext@listEx (description)}
+    \blinddescription
+    \subsubsection{\blindtext@listEx (4*description)}
+    \blindlistlistoptional{description}[2]
+}
+%    \end{macrocode}
+%    \end{macro}%^^A{\blinddocument}
+%
+%    \begin{macro}{\Blinddocument}
+% \verb|\blinddocument| adds a document with \verb|\chapter|,
+% \verb|\section|\ldots, texts and lists (itemize, enumerate,
+% description).
+%    \begin{macrocode}
+\newcommand{\Blinddocument}{
+\@ifundefined{chapter}{}{%
+    \chapter{\blindtext@heading 0 (chapter)}\blindtext%
+    }
+\section{       \blindtext@heading 1 (section)}     \Blindtext
+\subsection{    \blindtext@heading 2 (subsection)}  \Blindtext
+\subsubsection{ \blindtext@heading 3 (subsection)}  \Blindtext
+\paragraph{     \blindtext@heading 4 (paragraph)}   \Blindtext
+\section{\blindtext@list}
+\subsection{\blindtext@listEx (itemize)}
+    \Blinditemize
+    \subsubsection{\blindtext@listEx (4*itemize)}
+    \blind@longtrue
+    \blindlistlist{itemize}[2]
+\subsection{\blindtext@listEx (enumerate)}
+    \Blindenumerate
+    \subsubsection{\blindtext@listEx (4*enumerate)}
+    \blind@longtrue
+    \blindlistlist{enumerate}[2]
+\subsection{\blindtext@listEx (description)}
+    \Blinddescription
+    \subsubsection{\blindtext@listEx (4*description)}
+    \blind@longtrue
+    \blindlistlistoptional{description}[2]
+}
+%    \end{macrocode}
+%    \end{macro}%^^A{\Blinddocument}
+%
+%% ^^A-----------------------------------------------------------
+% \section{The texts}
+%    \begin{macro}{\addto}
+% If babel is not loaded, we need the command \verb|\addto|.
+%    \begin{macrocode}
+%\providecommand{\addto}[2]{#2}
+\@ifundefined{addto}{
+\@ifpackageloaded{babel}{}{
+\PackageWarning{blindtext}{%
+You are not using babel.sty -> Language by random\MessageBreak
+Kein babel.sty verwendet -> Zufallssprache}}
+\newcommand{\addto}[2]{#2}
+}{}
+%    \end{macrocode}
+%    \end{macro}%^^A\addto
+%
+% \subsection{Default without language}
+% First all texts without any language. If you make a new translation, please
+% define all this macros.
+%    \begin{macrocode}
+\def\blindtext@text{Text}
+\def\blindtext@count{\ifcase\blind@listitem\or
+    First\or Second %...
+    \else Last\blind@listitem=0\fi
+    \global\advance\blind@listitem by 1
+}%\blindtext@count}
+\def\blindtext@item{itemtext}
+\def\blindtext@countitem{\blindtext@count\ \blindtext@item}
+\def\blindtext@heading{Heading on level\xspace}
+\def\blindtext@list{Lists}
+\def\blindtext@listEx{Example for list\xspace}
+%    \end{macrocode}
+%
+% \subsection{English Texts}
+%    \begin{macrocode}
+\addto\extrasenglish{
+\def\blindtext@text{
+Hello, here is some text without a meaning. This text should show,
+how a printed text will look like at this place. If you read this
+text, you will get no information. Really? Is there no
+information? Is there a difference between this text and some
+nonsense like \frqq Huardest gefburn\flqq? Kjift -- Never mind! A
+blind text like this gives you information about the selected
+font, how the letters are written and the impression of the look.
+This text should contain all letters of the alphabet and it should
+be written in of the original language. There is no need for a
+special contents, but the length of words should match to the
+language.}%\blindtext@text
+}
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasenglish{
+\def\blindtext@count{\ifcase\value{listcount}\or
+    First\or Second \or Third \or Fourth\or Fivth\or
+    Sixth\or Seventh\or Eighth \or Ninth\or Tenth\or
+    Eleventh\or Twelfth
+    \else Another
+    \fi
+}%\blindtext@count
+\def\blindtext@item{item in a list} %, level~\arabic{blindlist@level}}
+} %\addto\extrasenglish
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasenglish{
+    \def\blindtext@heading{Heading on level\xspace}
+    \def\blindtext@list{Lists}
+    \def\blindtext@listEx{Example for list\xspace}
+} %\addto\extrasenglish
+%
+%    \end{macrocode}
+% \subsection{German Texts}
+%
+%    \begin{macrocode}
+\addto\extrasgerman{
+\def\blindtext@text{
+Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
+diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
+Grauwert der Schrift an. Ist das wirklich so? Ist es
+gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
+Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
+mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
+ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
+harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
+oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
+verschiedene Buchstaben enthalten und in der Originalsprache
+gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
+sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
+nicht dem eigentlichen Zweck, da sie eine
+falsche Anmutung vermitteln.}%\blindtext@text
+}
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasgerman{
+\def\blindtext@count{\ifcase\value{listcount}\or
+    Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
+    Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
+    Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter
+    \else Noch ein\fi
+}%\blindtext@count
+\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
+}% %\addto\extrasgerman
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasgerman{
+    \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
+    \def\blindtext@list{Listen}
+    \def\blindtext@listEx{Beispiel einer Liste\xspace}
+} %\addto\extrasgerman
+%
+% If the packet \Lpack{german} is loaded, select the language.
+%    \begin{macrocode}
+\@ifpackageloaded{german}{\selectlanguage{german}}{}
+%    \end{macrocode}
+%
+% \subsection{German - New typesetting}
+%    \begin{macrocode}
+\addto\extrasngerman{
+\def\blindtext@text{
+Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer
+diesen Text liest, ist selbst schuld. Der Text gibt lediglich den
+Grauwert der Schrift an. Ist das wirklich so? Ist es
+gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein
+Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift --
+mitnichten! Ein Blindtext bietet mir wichtige Informationen. An
+ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie
+harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit
+oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele
+verschiedene Buchstaben enthalten und in der Originalsprache
+gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar
+sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen
+nicht dem eigentlichen Zweck, da sie eine
+falsche Anmutung vermitteln.}%\blindtext@text
+}
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasngerman{
+\def\blindtext@count{\ifcase\value{listcount}\or
+    Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or
+    Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or
+    Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter
+    \else Noch ein\fi
+}%\blindtext@count
+\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}}
+}% %\addto\extrasgerman
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\addto\extrasngerman{
+    \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace}
+    \def\blindtext@list{Listen}
+    \def\blindtext@listEx{Beispiel einer Liste\xspace}
+} %\addto\extrasngerman
+%
+% If the packet \Lpack{ngerman} is loaded, select the language.
+%    \begin{macrocode}
+\@ifpackageloaded{ngerman}{\selectlanguage{ngerman}}{}
+%    \end{macrocode}
+%
+% \section{Some other macros}
+% \changes{V1.2b}{2001/05/25}{Add macros vieltext and alotoftext}
+%    \begin{macro}{\alotoftext}
+%    \begin{macrocode}
+\let\alotoftext=\blindtext
+%    \end{macrocode}
+%    \end{macro}%^^A\alotoftext
+%
+% \Finale
+% \PrintIndex
+% \end{document}
+%</package>
diff --git a/Master/texmf-dist/source/latex/minutes/blindtext.ins b/Master/texmf-dist/source/latex/minutes/blindtext.ins
new file mode 100644
index 00000000000..20275f130ef
--- /dev/null
+++ b/Master/texmf-dist/source/latex/minutes/blindtext.ins
@@ -0,0 +1,35 @@
+\def\batchfile{blindtext.ins}
+\input docstrip.tex
+\keepsilent
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\preamble
+----------------------------------------------------------------------
+The original file is loadable from CTAN on:
+macros/latex/contrib/supported/minutes
+
+Name of contribution: minutes
+Name and email:       Knut Lickert <knut.lickert@gmx.de>
+Location on CTAN:     tex-archive/macros/latex/contrib/supported/lickert
+Summary description:  Package for writing text
+License type:         Free
+
+Announcement text:
+blindtext.sty:
+    Style to create text.
+    Can be used to create examples with a lot text to become a feeling
+    for the look of classes, packages...
+----------------------------------------------------------------------
+\endpreamble
+
+\generateFile{blindtext.sty}{f}{\from{blindtext.dtx}{package}}
+
+\Msg{***************************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to copy the files }
+\Msg{*}
+\Msg{*\space\space *.sty, *.cfg into a directory searched by TeX}
+\Msg{*}
+\Msg{***************************************************************}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\endinput
diff --git a/Master/texmf-dist/source/latex/minutes/minutes.dtx b/Master/texmf-dist/source/latex/minutes/minutes.dtx
new file mode 100644
index 00000000000..df6b27c1741
--- /dev/null
+++ b/Master/texmf-dist/source/latex/minutes/minutes.dtx
@@ -0,0 +1,2385 @@
+\def\minfileversion{V1.7}     %^^Aof minutes.sty
+\def\minfiledate{2001/09/19}   %^^Aof minutes.sty
+% \CheckSum{1736}
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+% \DoNotIndex{\@,\@@par,\@beginparpenalty,\@empty}
+% \DoNotIndex{\@flushglue,\@gobble,\@input}
+% \DoNotIndex{\@makefnmark,\@makeother,\@maketitle}
+% \DoNotIndex{\@namedef,\@ne,\@spaces,\@tempa}
+% \DoNotIndex{\@tempb,\@tempswafalse,\@tempswatrue}
+% \DoNotIndex{\@thanks,\@thefnmark,\@topnum}
+% \DoNotIndex{\@@,\@elt,\@forloop,\@fortmp,\@gtempa,\@totalleftmargin}
+% \DoNotIndex{\",\/,\@ifundefined,\@nil,\@verbatim,\@vobeyspaces}
+% \DoNotIndex{\|,\~,\ ,\active,\advance,\aftergroup,\begingroup,\bgroup}
+% \DoNotIndex{\mathcal,\csname,\documentstyle,\dospecials}
+% \DoNotIndex{\egroup}
+% \DoNotIndex{\else,\endcsname,\endgroup,\endinput,\endtrivlist}
+% \DoNotIndex{\expandafter,\fi,\fnsymbol,\futurelet,\gdef,\global}
+% \DoNotIndex{\hbox,\hss,\if,\if@inlabel,\if@tempswa,\if@twocolumn}
+% \DoNotIndex{\ifcase}
+% \DoNotIndex{\ifcat,\iffalse,\ifx,\ignorespaces,\index,\input,\item}
+% \DoNotIndex{\jobname,\kern,\leavevmode,\leftskip,\let,\llap,\lower}
+% \DoNotIndex{\m@ne,\next,\newpage,\nobreak,\noexpand,\nonfrenchspacing}
+% \DoNotIndex{\obeylines,\or,\protect,\raggedleft,\rightskip,\rm,\sc}
+% \DoNotIndex{\setbox,\setcounter,\small,\space,\string,\strut}
+% \DoNotIndex{\strutbox}
+% \DoNotIndex{\thefootnote,\thispagestyle,\topmargin,\trivlist,\tt}
+% \DoNotIndex{\twocolumn,\typeout,\vss,\vtop,\xdef,\z@}
+% \DoNotIndex{\,,\@bsphack,\@esphack,\@noligs,\@vobeyspaces,\@xverbatim}
+% \DoNotIndex{\`,\catcode,\end,\escapechar,\frenchspacing,\glossary}
+% \DoNotIndex{\hangindent,\hfil,\hfill,\hskip,\hspace,\ht,\it,\langle}
+% \DoNotIndex{\leaders,\long,\makelabel,\marginpar,\markboth,\mathcode}
+% \DoNotIndex{\mathsurround,\mbox,\newcount,\newdimen,\newskip}
+% \DoNotIndex{\nopagebreak}
+% \DoNotIndex{\parfillskip,\parindent,\parskip,\penalty,\raise,\rangle}
+% \DoNotIndex{\section,\setlength,\TeX,\topsep,\underline,\unskip,\verb}
+% \DoNotIndex{\vskip,\vspace,\widetilde,\\,\%,\@date,\@defpar}
+% \DoNotIndex{\[,\{,\},\]}
+% \DoNotIndex{\count@,\ifnum,\loop,\today,\uppercase,\uccode}
+% \DoNotIndex{\baselineskip,\begin,\tw@}
+% \DoNotIndex{\a,\b,\c,\d,\e,\f,\g,\h,\i,\j,\k,\l,\m,\n,\o,\p,\q}
+% \DoNotIndex{\r,\s,\t,\u,\v,\w,\x,\y,\z,\A,\B,\C,\D,\E,\F,\G,\H}
+% \DoNotIndex{\I,\J,\K,\L,\M,\N,\O,\P,\Q,\R,\S,\T,\U,\V,\W,\X,\Y,\Z}
+% \DoNotIndex{\1,\2,\3,\4,\5,\6,\7,\8,\9,\0}
+% \DoNotIndex{\!,\#,\$,\&,\',\(,\),\+,\.,\:,\;,\<,\=,\>,\?,\_}
+% \DoNotIndex{\discretionary,\immediate,\makeatletter,\makeatother}
+% \DoNotIndex{\meaning,\newenvironment,\par,\relax,\renewenvironment}
+% \DoNotIndex{\repeat,\scriptsize,\selectfont,\the,\undefined}
+% \DoNotIndex{\arabic,\do,\makeindex,\null,\number,\show,\write,\@ehc}
+% \DoNotIndex{\@author,\@ehc,\@ifstar,\@sanitize,\@title,\everypar}
+% \DoNotIndex{\if@minipage,\if@restonecol,\ifeof,\ifmmode}
+% \DoNotIndex{\lccode,\newtoks,\onecolumn,\openin,\p@,\SelfDocumenting}
+% \DoNotIndex{\settowidth,\@resetonecoltrue,\@resetonecolfalse,\bf}
+% \DoNotIndex{\clearpage,\closein,\lowercase,\@inlabelfalse}
+% \DoNotIndex{\selectfont,\mathcode,\newmathalphabet,\rmdefault}
+% \DoNotIndex{\bfdefault}
+% \DoNotIndex{\LaTeXe,\hline,\hrulefill,\@Roman,\addtocounter,\documentclass}
+% \DoNotIndex{\footnotesize,\tiny,\em,\value,\@afterheading,\@afterindentfalse}
+% \DoNotIndex{\filedate,\fileversion,\linewidth,\MessageBreak}
+% \DoNotIndex{\newcommand,\newcounter,\pageref,\noindent,\newlength}
+% \DoNotIndex{\renewcommand,\stepcounter}
+% \DoNotIndex{\Lopt,\Lpack,\Lenv,\DTK}
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\IfFileExists{hyperref.sty}{\usepackage{hyperref}}{}
+\IfFileExists{thumbpdf.sty}{\usepackage{thumbpdf}}{}
+\usepackage{makeidx}
+\usepackage{url}
+\input{Overview}%Tables for minutes.dtx and protokol.tex
+\CodelineIndex
+\makeindex
+%^^A\OnlyDescription
+\begin{document}
+ \RecordChanges
+ \DocInput{minutes.dtx}
+\end{document}
+%</driver>
+%<*package>
+% \fi
+%
+% \title{
+%   \LaTeXe\ for people in associations\\
+%            \Lpack{Minutes.sty}\thanks{
+%   Download possible from CTAN
+%   ftp.dante.de/macros/latex/contrib/supported/minutes/
+%   }}
+% \author{\\
+%   Version \minfileversion\ from \minfiledate\\~\\
+%   Knut Lickert\\
+%^^A   vorstand@koki-es.de\\
+%^^A   lickert@gemeinschaftsauto.de\\
+%      knut@lickert.net}
+% \maketitle
+%
+% \changes{V1.5b}{2000/12/02}{Separation of package and german description}
+%
+%\begin{abstract}
+%
+% With \Lpack{minutes.sty} you can write minutes for
+% associations or similar organisations.
+%
+% Special features:
+% \begin{itemize}
+% \item header can be choosen
+% \item  Support of tasks (who, schedule, what, date of finishing),
+%   possibility of creating a list of open tasks
+% \item  Support of attachments
+% \item  Support of schedule dates (support of \Lpack{calendar.sty})
+% \item Different versions (`secret parts')
+% \item Macros for votes and decisions (list of decisions)
+% \end{itemize}
+%\end{abstract}
+%
+% \tableofcontents
+%
+% \section{Some hints for \Lpack{minutes.sty}}
+% \begin{itemize}
+%   \item There is no english description of the package up to now.
+%       Please refer the samples and the Style Guide.
+%   \item The file \file{Protokol.tex} contains a
+%           german description of the package.
+%   \item Try the difference of using \Lpack{scrartcl} and
+%   \Lpack{scrreprt}.
+% \end{itemize}
+%
+% \subsection{Options}
+% \minOptions
+% \minStyles
+% \subsection{Commands}
+% \minCommands
+%
+% \subsection{Bugs and wishes}
+% \changes{V1.4b}{2000/08/09}{list of known bugs}
+% Known bugs:\label{sec:bugs}
+% \begin{itemize}
+%   \item Error with \Lopt{TwoColumn} and \Lenv{Secret}
+%       (\emph{V1.4})
+%   \item Dates get two :: (\Lopt{refrep})
+%   \item Long numbers in the list of topics create bad output (\emph{V1.4}).
+%   With \verb|\addtopic| it happen often (long roman Numbers)
+%   \item Calender \Lpack{calendar.sty} breaks easily (\emph{V1.4}).
+%   \item List of task with dates are printed bad (\emph{1.3})
+% \end{itemize}
+%
+% Issues for the future:
+% \begin{itemize}
+%   \item Attachments with \LaTeX-Documents should be possible
+%   \item List of Attachments also for each minutes.
+%   \item The Macro \verb|\schedule| allows no long text
+%   \item List of decisions are not complete. Decisions should be arranged
+%         in groups (\verb|\decisiontheme|), but the grouping must be done
+%         manual. (makeglossary?)
+%   \item \verb|\task| and \verb|\schedule| contain both dates,
+%   but have different inputs.
+%   (\verb|\schedule| need input like yyyy/mm/dd, \verb|\task| is free.
+%   There should be one behaviour of both commands.
+% \end{itemize}
+%
+%\iffalse
+%</package>
+%<*sample>
+%\fi
+% \section{Samples}\label{sec:Samples}
+% This samples contain all features of \Lpack{minutes.sty}.
+% Can be used as a torture test for cooperation with classes and other packages.
+% If you are using the calendar option you must test it with \Lpack{calendar.sty}.
+%
+% \subsection{Start a collection of minutes}
+% You can use \Lpack{minutes} with \Lpack{report.cls} or
+% \Lpack{article.cls} (or similar packets like \Lpack{scrarctl}).
+% With \Lpack{article} each
+% minutes is a \verb|\part*|, with \Lpack{book} a
+% \verb|\chapter|.
+%    \begin{macrocode}
+\documentclass{report}
+%%\documentclass{article}
+%%\documentclass{scrreprt}
+%%\documentclass{scrarctl}
+\usepackage[english,german]{babel}
+\usepackage{minutes}
+
+%%\usepackage{Evntlist}%\usepackage{Calendar}
+\title{Collection of minutes\\Protokollsammlung\\[1cm]
+minutes.sty}
+\author{\LaTeXe}
+\minutesstyle{
+%   columns  = {1},
+    header   = {list}, %or {table},
+    vote     = {list}, %or {table},
+    contents = {true}, %or {false}
+}
+\begin{document}
+%    \end{macrocode}
+% You can create your own title and make a table of contents for
+% the main topics of the minutes.
+%    \begin{macrocode}
+\maketitle
+\tableofcontents
+%    \end{macrocode}
+% Here we load two samples. You can insert your minutes here.
+%    \begin{macrocode}
+\selectlanguage{english}
+\inputminutes{SampleEN}%A english minutes
+\selectlanguage{german}
+\inputminutes{SampleDE}%Ein deutsches Protokoll
+%    \end{macrocode}
+%
+%\iffalse
+%</sample>
+%<*sampleEN>
+%\fi
+%
+% \subsection{How to write a minutes}
+% Here an example of the look of a minutes with all features of
+% \Lpack{minutes.sty}.
+%
+% \subsubsection{Minutes with english macros}
+%    \begin{macrocode}
+\begin{Minutes}{Title of the english minutes}
+%%\subtitle{}
+%%\moderation{}
+%%\minutetaker{}
+\participant{list of participants}
+\missing[with excuse]{no excuse}
+%%\missingExcused{}
+%%\missingNoExcuse{}
+\guest{guests}
+\minutesdate{24. December 2000}
+%%\starttime{}
+%%\endtime{}
+\location{Esslingen}
+%%\cc{}
+\maketitle
+
+\topic{Topic one}%<-- insert title of topic
+\subtopic{Sub Topic to Topic one}
+Text for the topic.
+
+\topic{Dates}
+\schedule{2000/12/24}{Christmas eve}
+\schedule{2000/12/24}[20:00]{distribution of presents}
+\schedule*{2000/12/25}{Christmas day (without entry in calendar)}
+
+\topic{Tasks}
+\task{Who}{Action}
+\task*{Somebody has to do it}
+\task*[today]{Somebody do it}
+\task[done]{responsible}[yesterday]{Somebody did it}
+
+\newcols[][1]%because of a Bug
+\begin{Secret}
+\topic{Secret Topic}
+This topic is secret and is printed with the option
+\texttt{Secret}.
+\end{Secret}
+\subtopic{After secret topic}
+\secret{small secret}
+If this section is printed outside the section "secret", some
+secret stuff is not printed. Check the option \texttt{Secret}.
+\newcols
+
+\addtopic{Additional Topic}
+\subtopic{subtopic}
+
+\topic{Attachments}
+\attachment{Attachment with two pages}{2}
+
+\topic{Decisions and votes}
+\subtopic{A single vote}
+\vote{Short voting}{1}{2}{3}
+
+And a single vote with decision:\par
+\vote{Short voting}{1}{2}{3}[Decision]
+
+\subtopic{A couple of votes}
+\begin{Vote}
+\vote{Vote one}{1}{2}{3}
+\vote{Vote two}{1}{2}{3}[decision]
+\vote{Vote three}{1}{2}{3}
+\end{Vote}
+
+\subtopic{Decisions}
+\decisiontheme{Theme}{Theme for a decision}
+\decision{Theme}{Decision}
+\decision*{Decision without theme}[Long text for the decision]
+\end{Minutes}
+%    \end{macrocode}
+%
+%\iffalse
+%</sampleEN>
+%<*sampleDE>
+%\fi
+%
+% \subsection{Minutes with german commands}
+% Some of my german friends complaint about all the english commands
+% they have to learn. They do not want to write \verb|\task|, they
+% want to use the german word \verb|\aufgabe| for this. So here an
+% example for this, a translation table is in
+% section~\ref{tab:commands}. There is no difference between the
+% german and the english commands, they can be mixed as you
+% want.\footnote{Please check the remarks for secret}
+%
+%    \begin{macrocode}
+\begin{Protokoll}{Titel des deutschen Protokolls}
+\untertitel{Untertitel}
+\moderation{Moderator, Sitzungsleiter}
+\protokollant{Protokollant}
+\teilnehmer{Teilnehmer}
+\gaeste{G\"aste}
+\sitzungsdatum{25.\ Dezember 1999}
+\sitzungsbeginn{10:00}
+\sitzungsende{20:00}
+\sitzungsort{Esslingen}
+\verteiler{Vereinsmitglieder}
+\fehlend[fehlt entschuldigt]{fehlt unentschuldigt}
+%%\fehlendEntschuldigt{}
+%%\fehlendUnentschuldigt{}
+\protokollKopf
+
+\topic{Top eins}%<-- hier Tagesordnungspunkt einfuegen
+\subtopic{Unterpunkt zu Top eins}%<-- Unterpunkt
+Text zum Tagesordnungspunkt.
+%%
+\topic{Termine und Aufgaben}
+\subtopic{Termine}
+\termin{2000/12/24}[10:00]{Heiliger Vormittag}
+\termin{2000/12/24}{Heiligabend}
+\termin{2000/12/24}[20:00]{Bescherung}[Ob meine W\"unsche erf\"ullt werden?]
+\termin*{2000/12/25}{Weihnachten (ohne Kalendereintrag)}
+
+\topic{Aufgaben}
+\aufgabe{Wer}{Was}
+\aufgabe*{Jemand macht was}
+\aufgabe*[Heute]{Jemand soll heute was machen}
+\aufgabe[Erledigt]{Zust{\"a}ndig}[Gestern]{Jemand macht was}
+
+\newcols[][1]%notwendig wegen einem Fehler
+\begin{Geheim}
+\topic{Geheimer Punkt}
+Dieser Text ist geheim und kann mit der Option \texttt{Secret}
+ausgegeben werden.
+\end{Geheim}
+
+\subtopic{Nach Geheimen Text}
+Wenn dieser Abschnitt nicht im Hauptabschnitt "`Geheim"' liegt,
+dann wurde die Ausgabe des geheimen Textes unterdr{\"u}ckt.
+\geheim{Jetzt noch ein kleines Geheimnis}
+\newcols
+
+\zusatztopic{Au{\ss}erordentlicher Tagesordnungspunkt}
+\subtopic{Unterpunkt}
+
+\topic{Anh{\"a}nge}
+\anhang{Anhang mit zwei Seiten}{2}
+
+\topic{Abstimmungen und Entscheidungen}
+\subtopic{Einzelne Abstimmungen}
+\abstimmung{Kurze Abstimmung}{1}{2}{3}
+
+Und noch eine Abstimmung mit Ergebnis:\par
+\abstimmung{Kurze Abstimmung}{1}{2}{3}[Ergebnis]
+
+%
+\subtopic{Mehrere Abstimmungen in Folge}
+\begin{Abstimmung}
+\abstimmung{Abstimmung eins}{1}{2}{3}
+\abstimmung{Abstimmung zwei}{1}{2}{3}[Entscheidung]
+\abstimmung{Abstimmung drei}{1}{2}{3}
+\end{Abstimmung}
+
+\subtopic{Beschl{\"u}sse}
+\beschlussthema{Thema}{Titel des Themas}
+\beschluss{Thema}{Entscheidung gefallen}
+\beschluss*{Entscheidung ohne Thema}[Langtext zur Entscheidung]
+\end{Protokoll}
+%    \end{macrocode}
+%
+%\iffalse
+%</sampleDE>
+%<*sample>
+%\fi
+%
+% \subsection{Finish the collection of minutes}
+% When you finish your minutes, you want to print
+% \begin{itemize}
+%   \item All decisions
+%   \item All open tasks
+%   \item A list of attachments
+%   \item A calendar with scheduled dates (event list\ldots)
+% \end{itemize}
+%
+%    \begin{macrocode}
+%%-----------------
+\appendix
+\chapter{Appendix}
+\selectlanguage{english}
+\section{List of decisions in sample.tex}\listofdecisions
+\section{List of open tasks from sample.tex}\listoftasks
+\section{list of attachments in sample.tex}\listofattachments
+%%\selectlanguage{german}
+%%\section{Liste der Beschl{\"u}sse}\beschlussliste
+%%\section{Liste offener Aufgaben}\aufgabenliste
+%%\section{Liste der Anh{\"a}nge}\anhangsliste
+\section{Calendar}
+\prepareCal
+%%\begin{eventlist}{}{Sample}
+%%1 dec 2000 to 31 dec 2000
+%%\end{eventlist}
+\end{document}
+%    \end{macrocode}
+%
+%\iffalse
+%</sample>
+%<*styleguide>
+%\fi
+%
+% \section{Style Guide}
+% This part creates a file \url{MinStyGd.tex} to see the
+% look of the different options. To check another class, just modify
+% the class in header.
+%    \begin{macrocode}
+\documentclass[10pt,german]{report}
+%%\documentclass[10pt,german]{scrreprt}
+%%\documentclass[10pt,german]{refrep}
+%% This document can be used to check the look of different
+%% minutes-styles.
+%% To see the effects of other classes and the cooperation with
+%% different classes and styles, just add them to this document.
+%%
+%% Dieses Dokument kann genutzt werden einen Ueberblick ueber
+%% die verschiedenen Protokollstile zu bekommen.
+%%
+\usepackage{babel}%blindtext mag kein german.sty
+\usepackage{minutes}
+\usepackage{blindtext}
+\newcommand{\Lpack}[1]{\texttt{#1}}
+\newcommand{\minutes}{\Lpack{minutes.sty}}
+
+\makeatletter
+\newcommand{\minexample}[1]{
+\begin{Protokoll}{Beispiel eines Protokolls mit #1}
+\untertitel{Dieses Protokoll ist mit \minutes\ erzeugt}
+\moderation{Knut Lickert}
+\protokollant{Knut Lickert}
+\teilnehmer{Alle Anwesenden}
+\gaeste{G\"aste}
+\sitzungsdatum{\today}
+\sitzungsbeginn{20:00}
+\sitzungsende{23:00}
+\sitzungsort{Vereinsgastst{\"a}tte}
+\verteiler{alle Interessierten}
+\fehlend[alle Analphabeten]{Vereinsm{\"u}ller}
+\protokollKopf
+\topic{Tagesordnung 1}
+\subtopic{Unterpunkt zu Tagesordnung 1}\blindtext
+\subtopic{Noch ein Unterpunkt zu Tagesordnung 1}\blindtext
+\addtopic{Einschub in die Tagesordnung}\blindtext
+\topic{Tagesordnung 2}\blindtext
+\end{Protokoll}
+}%\minexample
+% %\makeatother %no/needed for different maketitle
+
+\begin{document}
+\title{Styleguide \minutes:\\~\\
+Test for the different options\\ Test der verschiedenen Optionen}
+\author{\minutes}
+\maketitle
+
+\tableofcontents
+
+\minutesstyle{header={list},columns={1}}
+\minexample{Listenkopf}
+
+\minutesstyle{header={table},columns={1}}
+\minexample{Tabellenkopf}
+
+\minutesstyle{header={list},columns={1},contents={false}}
+\minexample{Listenkopf ohne Topicliste}
+
+\minutesstyle{header={table},columns={1},contents={false}}
+\minexample{Tabellenkopf ohne Topicliste}
+
+\minutesstyle{header={list},columns={2},contents={true}}
+\minexample{Listenkopf/zweispaltig}
+
+\minutesstyle{header={table},columns={2}}
+\minexample{Tabellenkopf/zweispaltig}
+
+\minutesstyle{header={list},columns={3}}
+\minexample{Listenkopf/dreispaltig}
+
+\minutesstyle{header={table},columns={3}}
+\minexample{Tabellenkopf/dreispaltig}
+
+\end{document}
+%    \end{macrocode}
+%
+%\iffalse
+%</styleguide>
+%<*package>
+%\fi
+%
+% \StopEventually
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \part*{Implementation}
+%
+% \section{Starting the package}
+% \setcounter{CodelineNo}{0}%^^A reset line number after samples, style guide...
+% \subsection{Needed Packages}
+% What do we need and expect:
+% \changes{V1.4b}{2000/09/05}{require minitoc 2000/08/08 v32}
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{minutes}[\minfiledate\space\minfileversion\space
+                            minutes.sty]
+\RequirePackage{multicol}[1999/10/21 v1.5w]
+\RequirePackage{xspace}[1997/10/13 v1.06]
+\RequirePackage{url}[1999/03/28]
+\RequirePackage{minitoc}[2000/12/13 v34]
+\RequirePackage{keyval}[1999/03/16 v1.13]
+%    \end{macrocode}
+%
+% If \Lpack{hyperref} is loaded, we must set some special flags.
+% \Lpack[2000/08/08 V32]{minitoc} is patched by Heiko Oberdiek for use with and without
+% \Lpack{hyperref}. So forget \Lpack{minitoc\_href} and \Lpack{minitoc-hyper}.
+% \changes{V1.4b}{2000/08/08}{Adaption for hyperref 2000/05/08 v6.70f}
+% When the levels for the hyperlinks in the lists are undefined we
+% get a lot of warnings.
+%    \begin{macrocode}
+\newif\ifhyperloaded
+\@ifpackageloaded{hyperref}{
+\global\hyperloadedtrue
+\def\theHattachment{\theattachment}%?
+%\def\theHdecision{\thedecision}%
+%\def\theHschedule{\theschedule}%
+%\def\theHtask{\thetask}%
+\def\toclevel@attachment{1}%like section
+\def\toclevel@decisiontheme{0}%  like section
+\def\toclevel@decision{1}%  like section
+\def\toclevel@schedule{1}%  like section
+\def\toclevel@task{1}%      like section
+}{}
+%    \end{macrocode}
+%
+% If \Lpack{hyperref} is loaded after \Lpack{minutes}, minutes is
+% not able to work correct (up to now). So here we check if the sequence is
+% correct.
+%    \begin{macrocode}
+\AtBeginDocument{
+\@ifpackageloaded{hyperref}{
+\ifhyperloaded\else
+\PackageError{minutes.sty}{load hyperref.sty before minutes.sty}{
+  minutes.sty:\MessageBreak
+  You try to use minutes.sty with hyperref.sty\MessageBreak
+  minutes.sty must adapt some feature for it,\MessageBreak
+  so please load hyperref.sty first.}%
+\fi
+}{}
+}
+%    \end{macrocode}
+%
+% \subsection{Default Settings}
+%    \begin{macro}{\minustesstyle}
+% \changes{2001/09/19}{V1.6c}{add \cmd{minutesstyle}}
+% With the \Lpack{keyval} package you can select parameters better
+% then with options. For the options see~\pageref{sec:minStyles}
+%    \begin{macrocode}
+\newcommand{\minutesstyle}[1]{%
+    \setkeys{min@style}{#1}%
+}
+%    \end{macrocode}
+%    \end{macro}%
+%
+% \changes{2001/10/12}{V1.6c}{Add flag for printing list of topics}
+%    \begin{macrocode}
+\newif\ifmin@listoftopics
+\min@listoftopicstrue
+\define@key{min@style}{contents}[true]{%
+    \def\min@xx{#1}
+    \def\min@yy{true}
+    \ifx\min@xx\min@yy
+        \min@listoftopicstrue
+    \else
+        \min@listoftopicsfalse
+    \fi
+}
+%    \end{macrocode}
+%
+%
+% First some settings for pages, columns for \Lpack{multicol}
+% Standard is one column for each (\verb|\topic|).
+% In case of two columns, the title of the topic is written on both columns.
+% The Option \Lopt{OneColumn} set one column, \Lopt{TwoColumn} set two column.
+%
+% There are two counters. \verb|\columns| is a local counter for
+% internal changes. \verb|\min@columns| is a global value for
+% reseting \verb|\columns| each start of a new minutes.
+%    \begin{macrocode}
+\newcounter{columns}\setcounter{columns}{1}
+\newcounter{min@columns}\setcounter{min@columns}{1}
+\define@key{min@style}{columns}[1]{
+    \setcounter{min@columns}{#1}
+}
+\DeclareOption{OneColumn}{
+\minutesstyle{columns = {1}}
+}
+\DeclareOption{TwoColumn}{
+\minutesstyle{columns = {2}}
+}
+\pagestyle{headings}
+%    \end{macrocode}
+%
+% With the flag \verb|\ifmin@fileinfo| you can influence if you want
+% a paper with or without information of the file and line number,
+% where some parts occurs. With the option \Lopt{Fileinfo} the file name
+% (loaded with \verb|\inputminutes|) and the line number of a task
+% will be printed in the list of tasks.
+%    \begin{macrocode}
+\newif\ifmin@fileinfo
+\min@fileinfofalse
+\DeclareOption{Fileinfo}{
+\min@fileinfotrue
+}
+%    \end{macrocode}
+%
+%\changes{2000/08/22}{V1.4b}{Option ASCII added}
+% If you prepare your minutes with \Lprog{dvi2tty} for direct
+% ASCII-output in a mail program the option \Lopt{ASCII} will be
+% helpful to suppress some special characters and the page numbers.
+%    \begin{macrocode}
+\DeclareOption{ASCII}{
+\renewcommand\result{\item [-->]}
+\renewcommand\contra{\item [-]}
+\renewcommand\pro{\item [+]}
+\renewcommand\to{->}
+\renewcommand\hookrightarrow{->}%used in in task
+\renewcommand\@dotsep{1000}%no dots at \tableofcontents
+\renewcommand\thepage{}%no pages in ASCII-lists
+\pagestyle{empty}
+\setcounter{columns}{1}
+%\textwidth=80ex
+}
+%    \end{macrocode}
+% \subsection{Definition for table of contents}
+%
+% If \verb|\chapter| is defined, a collection of minutes is built.
+% Each minutes get a table of contents (\Lpack{minitoc}).
+% With the macro \verb|\tableofcontents| you get a table of contents with
+% the main topics of the minutes.
+%
+% If \verb|\chapter| is not defined, each minutes get a table of
+% contents with \verb|\tableofcontents|.
+% \changes{V1.5b}{2000/12/20}{For article: Use \cmd{parttoc} instead \cmd{tableofcontents}}
+%    \begin{macrocode}
+\@ifundefined{chapter}{
+    \newcounter{min@savesecnumdepth}
+    \doparttoc
+    }{
+    \setcounter{tocdepth}{1}
+    \setcounter{minitocdepth}{4}
+    \dominitoc
+    }
+%    \end{macrocode}
+%
+% \changes{V1.5b}{2000/12/20}{Add \cmd{faketableofcontents}}
+% With \verb|\faketableofcontents| the minitoc is possible without a
+% \verb|\tableofcontents|. When you insert it in the top of the document,
+% a table of contents remain empty. In the end of the document it works.
+%    \begin{macrocode}
+\AtEndDocument{\faketableofcontents}
+%    \end{macrocode}
+%
+% If \verb|\section| is undefined give an error.
+%    \begin{macrocode}
+\@ifundefined{section}%
+{\PackageError{minutes.sty}{section not defined}{
+  minutes.sty:\MessageBreak
+  You try to use minutes.sty with a class\MessageBreak
+  which does not support the section command\MessageBreak
+  Please check your class.}%
+}{\relax}
+%    \end{macrocode}
+%
+% \changes{V1.4b}{2000/08/09}{filenames in length 8+3}
+% \Lpack{minutes} creates file with an extension, longer than 3 letters.
+% The option \Lopt{8+3} creates shorter file names.
+%    \begin{macrocode}
+\newcommand{\min@file@Att}{minAtt}
+\newcommand{\min@file@Cld}{minCld}
+\newcommand{\min@file@Dec}{minDec}
+\newcommand{\min@file@task}{minTsk}
+\DeclareOption{8+3}{
+\renewcommand{\min@file@Att}{miA}
+\renewcommand{\min@file@Cld}{miC}
+\renewcommand{\min@file@Dec}{miD}
+\renewcommand{\min@file@task}{miT}
+\PackageWarningNoLine{minutes.sty}{
+  You selected the option 8+3\MessageBreak
+  Check for a correct installation of minitoc.sty.
+}
+}
+%    \end{macrocode}
+%
+%\subsection{Configuration File}
+% For the re-use of address data, you can define your local
+% address in the file \file{minutes.cfg}.
+%
+% The option \Lopt{Dante} gives you an example.
+%    \begin{macrocode}
+\InputIfFileExists{minutes.cfg}{
+\typeout{Using the configuration file minutes.cfg}}{}
+%    \end{macrocode}
+%
+% The option \Lopt{Dante} gives you an example how to define some data in
+% the configuration file.
+%\iffalse
+%</package>
+%<*config>
+%\fi
+%    \begin{macrocode}
+\DeclareOption{Dante}{
+\newcommand\name{Deutschsprachige Anwendungsvereinigung
+                    von \TeX-Anwendern e.V.}
+\newcommand\address{Postfach 101640, 69008 Heidelberg}
+\newcommand\phone{06221/29766}
+\newcommand\eMail{dante@dante.de}
+% ^^A Additional constants
+}
+\DeclareOption{KoKi}{
+\newcommand\name{Kommunales Kino Esslingen}
+\newcommand\address{Maille 5, 73728 Esslingen}
+\newcommand\phone{0711/356 799}
+\newcommand\eMail{info@koki-es.de}
+\newcommand\film[1]{\emph{#1}}
+% ^^A Additional constants
+}
+%    \end{macrocode}
+%\iffalse
+%</config>
+%
+%<*package>
+%\fi
+% \section{Defining a Minutes}
+% \subsection{The different Title-Styles}
+%
+%With \verb|\maketitle| you create the title of a minutes.
+%By Option you can choose different styles for the title of
+%a minutes. Standard is a list-like title. An Option set the
+%macro \verb|\min@maketitle| to the value of the wanted
+%title.
+%
+% All values are stored in the macros \verb|\min@...|, the texts
+% are in \verb|\min@text...|.
+%
+% \subsubsection{List-like title}
+%This title creates a list of all filled values for the
+%title. If you are using many parameters, it will look long
+%and awful. In this case, choose a more compact version or a
+%tabular-like version.\par
+%
+% \begin{macro}{\min@maketitleList}
+% First we write the title. Here we use the functionality of
+% the sectioning command of \LaTeX\ and \Lpack{minitoc.sty}.
+%    \begin{macrocode}
+\def\min@maketitleList{
+\minutes@titlesettrue
+\@ifundefined{chapter}{%
+    \setcounter{min@savesecnumdepth}{\value{secnumdepth}}
+    \setcounter{secnumdepth}{-1}%no numbering for minutes
+    \part[\min@titleshort]{\min@title}
+    \setcounter{section}{0}
+    \setcounter{secnumdepth}{\value{min@savesecnumdepth}}
+}{  \chapter[\min@titleshort]{\min@title}}
+%    \end{macrocode}
+%
+% \begin{macro}{\min@writeNotRelax}
+% A small macro to print a \verb|\item[]|,
+% if the according first value is not \verb|\relax|.
+%    \begin{macrocode}
+\def\min@writeNotRelax##1##2{
+\ifx\relax##1\else
+\item[##2] ##1
+\fi}
+%    \end{macrocode}
+% \end{macro}% ^^A  \min@writeNotRelax
+%
+% Here we start the output of the header data using the
+% functionality of \verb|\min@writeNotRelax|.
+%    \begin{macrocode}
+\begin{quote}
+\ifx\relax\min@subtitle\else\min@subtitle\fi
+\begin{description}
+%\settowidth{\leftmargin}{\min@textPresent}
+\settowidth{\leftmargin}{10cm}
+\min@writeNotRelax{\min@information}{$\Rightarrow$}
+\min@writeNotRelax{\min@moderation}{\min@textModerator}
+\min@writeNotRelax{\min@minutetaker}{\min@textMinutesTaker}
+\min@writeNotRelax{\min@participiant}{\min@textPresent}
+\min@writeNotRelax{\min@missing}{\min@textAbsent}
+\min@writeNotRelax{\min@missingExc}{\min@textAbsentExcused}
+\min@writeNotRelax{\min@missingNoExc}{\min@textAbsentNoExcuse}
+\min@writeNotRelax{\min@guest}{\min@textGuest}
+%\min@writeNotRelax{\min@date}{\min@textDate}
+%\min@writeNotRelax{\min@starttime}{\min@textStarttime}
+%\min@writeNotRelax{\min@endtime}{\min@textEndtime}
+\min@writeNotRelax{\min@location}{\min@textLocation}
+\ifx\relax\min@date\else
+\item [\min@textDate] \min@date\
+    \min@starttime
+    \ifx\relax\min@endtime\else\ -- \min@endtime\fi
+\fi
+\min@writeNotRelax{\min@cc}{\min@textCc}
+%\secret{\item[!] \min@textSecret}
+\end{description}
+\end{quote}
+%    \end{macrocode}
+% Insert the list of topics.
+%    \begin{macrocode}
+\ifmin@listoftopics
+    \vspace{1ex}
+    \@ifundefined{chapter}{\parttoc}{\minitoc}%
+\fi%
+%    \end{macrocode}
+% Start the multicols-environment if required.
+%    \begin{macrocode}
+\ifnum\value{columns} > 1
+\begin{multicols}{\value{columns}}[][1cm]
+\fi
+}%
+%    \end{macrocode}
+% \end{macro} %^^A \min@maketitleList
+%
+%
+% \subsubsection{Table-like title}
+% This title creates a table with all values for the title.\par
+%
+% \begin{macro}{\min@maketitleTable}
+% First we write the title. Here we use the functionality of
+% the sectioning command of \LaTeX\ and minitoc.sty.
+%    \begin{macrocode}
+\def\min@maketitleTable{
+\minutes@titlesettrue
+\@ifundefined{chapter}{
+    \setcounter{min@savesecnumdepth}{\value{secnumdepth}}
+    \setcounter{secnumdepth}{-1}%no numbering for minutes
+    \part[\min@titleshort]{\min@title}
+    \setcounter{section}{0}
+    \setcounter{secnumdepth}{\value{min@savesecnumdepth}}
+}{  \chapter[\min@titleshort]{\min@title}}
+%    \end{macrocode}
+%
+% Here we start the output of the header data using the
+% tabular-environment.
+% \changes{V1.5b}{2000/11/09}{Fehler behoben bei Datumsausgabe}
+%    \begin{macrocode}
+\begin{tabular}{|*{2}{p{0.45\linewidth}|}}\hline
+%% \min@location is missing
+%% \min@guest is missing
+  \ifx\relax\min@subtitle\else
+    \multicolumn{2}{|p{0.9\linewidth}|}{\min@subtitle}\\\hline\fi
+  \ifx\relax\min@date\else
+    \multicolumn{2}{|p{0.9\linewidth}|}{
+          \min@textDate: \min@date\ \min@starttime
+          \ifx\relax\min@endtime\else -- \min@endtime\fi
+    }\\\hline
+  \fi%\min@date
+  \min@textModerator: \min@moderation
+  &\min@textMinutesTaker: \min@minutetaker\\\hline
+  \min@textPresent:\newline \min@participiant
+  &\min@textCc:\newline \min@cc\\\hline
+  \ifx\relax\min@missingExc1
+        \min@textAbsent:\newline \min@missing&\\\hline
+    \else
+        \min@textAbsentExcused:\newline \min@missingExc
+        &\min@textAbsentNoExcuse:\newline \min@missingNoExc\\\hline
+    \fi
+\end{tabular}
+%    \end{macrocode}
+% And the contents of this minutes.
+%    \begin{macrocode}
+\ifmin@listoftopics%
+    \@ifundefined{chapter}{\tableofcontents}{\minitoc}%
+\fi%
+%    \end{macrocode}
+% Start the multicols-environment if required.
+%    \begin{macrocode}
+\ifnum\value{columns} > 1
+\begin{multicols}{\value{columns}}[][1cm]
+\fi
+}%
+%    \end{macrocode}
+% \end{macro} %^^A \min@maketitleTable
+%
+% \subsection{The decision for a title}
+%Standard is a list-like header.
+%    \begin{macrocode}
+\let\min@maketitle\min@maketitleList
+\DeclareOption{ListTitle}{
+\minutesstyle{header = {list}}
+}
+\DeclareOption{TableTitle}{
+\minutesstyle{header = {table}}
+}
+%    \end{macrocode}
+%
+%    \begin{macro}{\minustesstyle/header}
+% \label{sec:vote:header}
+% With the command |\minutesstyle| you can define different
+% parameters of a minutes. Here the definitions for headers.
+% There are two possibilities:
+% \begin{itemize}
+%   \item |\minutesstyle{header={list}|
+%   \item |\minutesstyle{header={table}|
+% \end{itemize}
+%    \begin{macrocode}
+\define@key{min@style}{header}{
+    \def\min@xx{#1}
+    \def\min@yy{list}
+    \ifx\min@xx\min@yy
+        \let\min@maketitle\min@maketitleList
+    \else
+        \def\min@yy{table}
+        \ifx\min@xx\min@yy
+            \let\min@maketitle\min@maketitleTable
+        \else
+%            \def\min@yy{\relax}
+%            \ifcat\min@xx\min@yy??
+%            Wie prüfen, ob Kommando vorliegt?
+%                \let\min@maketitle#1
+%            \else
+                \PackageError{minutes.sty}{Unknown Header-Style}{
+                    minutes.sty:\MessageBreak
+                }
+%            \fi
+        \fi
+    \fi
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \subsection{The Minutes-Environment}
+% \DescribeEnv{Minutes}
+% Minutes are defined with the environment \Lenv{Minutes}.
+%Each minute must contain a \verb|\maketitle|. The flag
+%\verb|\ifminutes@titleset| controls this.
+%    \begin{macrocode}
+\newif\ifminutes@titleset
+%    \end{macrocode}
+% \subsubsection{Start of the environment}
+% \begin{environment}{Minutes}
+% The environment has one parameter: the title of the minutes. In an
+% optional parameter you can set a short title for the list of
+% contents.
+%    \begin{macrocode}
+\newenvironment{Minutes}[2][\relax]{%[short title]{Titel}
+%    \end{macrocode}
+% Set \verb|\ifminutes@titleset| to false.
+% The flag \verb|\ifminutes@titleset| is used at
+% \verb|\end{Minutes}| to check, if \verb|\maketitle| was
+% used.
+%    \begin{macrocode}
+\minutes@titlesetfalse
+\setcounter{columns}{\value{min@columns}}
+\let\maketitle\min@maketitle
+\let\protokollKopf\maketitle
+%    \end{macrocode}
+%Define the title for use in \verb|\maketitle| and clear the
+%other texts. All this macros are defined local inside the
+%\Lenv{minutes} environment.
+%    \begin{macrocode}
+\def\min@title{#2}
+\ifx#1\relax
+\def\min@titleshort{#2}
+\else
+\def\min@titleshort{#1}
+\fi
+\let\min@information\relax
+\let\min@subtitle\relax
+\let\min@moderation\relax
+\let\min@minutetaker\relax
+\let\min@participiant\relax
+\let\min@missing\relax
+\let\min@missingExc\relax
+\let\min@missingNoExc\relax
+\let\min@guest\relax
+\let\min@date\relax
+\let\min@starttime\relax
+\let\min@endtime\relax
+\let\min@location\relax
+\let\min@cc\relax
+}%
+%    \end{macrocode}
+%
+% \subsubsection{End of the environment}
+% If there is a \Lopt{TwoColumn} version, we must close the
+% \Lpack{multicols} environment.
+%    \begin{macrocode}
+{
+\ifnum\value{columns} > 1
+\end{multicols}
+\fi
+%    \end{macrocode}
+% If the command \verb|\addtopic| is used, \verb|\thesection| was modified. Here we built the standard.
+%    \begin{macrocode}
+\global\let\thesection=\min@thesection
+%    \end{macrocode}
+% Reset the date of minutes (If it is used outside the minutes environment).
+% \changes{V1.6b}{2001/02/18}{reset date for task outside a minutes environment}
+%    \begin{macrocode}
+\let\min@date\relax
+%    \end{macrocode}
+% Close the environment.
+%    \begin{macrocode}
+}
+%    \end{macrocode}
+% \end{environment}
+%
+% \subsection{The title of a minutes}
+% Here we give the minutes taker the possibility to define author
+% etc.\par
+% \DescribeMacro{\subtitle}
+%    \begin{macrocode}
+\def\subtitle#1{\def\min@subtitle{#1}}
+%    \end{macrocode}
+%
+% \DescribeMacro{\moderation}
+% \DescribeMacro{\minutetaker}
+% \DescribeMacro{\cc}
+%    \begin{macrocode}
+\def\moderation#1{\def\min@moderation{#1}}
+\def\minutetaker#1{\def\min@minutetaker{#1}}
+\def\cc#1{\def\min@cc{#1}}
+%    \end{macrocode}
+% \DescribeMacro{\minutesdate}
+% \DescribeMacro{\starttime}
+% \DescribeMacro{\endtime}
+% \changes{V1.5b}{2000/10/10}{\cmd{location} added}
+% \DescribeMacro{\location}
+%    \begin{macrocode}
+\def\minutesdate#1{\gdef\min@date{#1}}%use in \task
+\def\starttime#1{\def\min@starttime{#1}}
+\def\endtime#1{\def\min@endtime{#1}}
+\def\location#1{\def\min@location{#1}}
+%    \end{macrocode}
+%
+% \DescribeMacro{\participant}
+% \changes{V1.5b}{2000/12/20}{\cmd{guest} added}
+% \DescribeMacro{\guest}
+%    \begin{macrocode}
+\def\participant#1{\def\min@participiant{#1}}
+\def\guest#1{\def\min@guest{#1}}
+%    \end{macrocode}
+%
+% \DescribeMacro{\missing}
+% \DescribeMacro{\missingExcused}
+% \DescribeMacro{\missingNoExcuse}
+% The declaration of missing people is divided into people with an excuse
+% and people without. If you define only \verb|\missing| without an
+% optional parameter, there is no difference taken.
+%    \begin{macrocode}
+\newcommand{\missing}[2][\min@empty]{
+\ifx#1\min@empty\def\min@missing{#2}
+\else
+\missingExcused{#1}
+\missingNoExcuse{#2}
+\fi
+}
+\def\missingExcused#1{\def\min@missingExc{#1}}
+\def\missingNoExcuse#1{\def\min@missingNoExc{#1}}
+%    \end{macrocode}
+%
+% \subsection{Signature}
+% \DescribeMacro{\signature}
+% If you must sign a minutes, add this before
+% \verb|\end{Minutes}|.
+%    \begin{macrocode}
+\newcommand{\signature}[1]{
+\begin{tabular}{p{4cm}}
+  \vspace{2em}\\ \hline
+  \footnotesize #1
+\end{tabular}
+}
+%    \end{macrocode}
+%
+% \subsection{Compatibility with old version}
+%
+% \DescribeEnv{Protocoll}
+% The \Lenv{Protocoll}-environment is needed for compatibility
+% with an old version (I don't want to modify all my old minutes).
+% There are five parameters:
+%the title, the moderator, the minutes taker, the participants
+%and the people you are missing.
+%
+% Do not mix up with \verb|\begin{Protokoll}| with `k' instead of the `c'.
+%
+% \begin{environment}{Protocoll}
+%    \begin{macrocode}
+\newenvironment{Protocoll}[5]{
+\PackageWarning{minutes.sty}{Old environment protocoll, do not use!}
+\begin{Minutes}{#1}
+\ifx\empty#2\else\moderation{#2}\fi
+\ifx\empty#3\else\minutetaker{#3}\fi
+\ifx\empty#4\else\participant{#4}\fi
+\ifx\empty#5\else\missing{#5}\fi
+\maketitle
+}{\end{Minutes}}
+%    \end{macrocode}
+% \end{environment}%^^A Protocoll
+%
+% \subsection{Load a minutes}
+% \begin{macro}{\inputminutes}%
+% \changes{V1.4B}{2000/08/10}{Add commands for loading minutes in file}
+% If you have a master file for all minutes and the minutes in
+% special files, you can load the fields with \verb|\inputminutes|.
+% As an advantage the filename is stored and can be used for the
+% list of tasks. So you can easily find the file, where you have to
+% mark the finishing of a task.
+%    \begin{macrocode}
+\newcommand{\min@file}{\relax}
+%\newcommand{\min@file}{\jobname}%Bad, wenn _ in name
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\newcommand*{\inputminutes}[1]{
+\renewcommand{\min@file}{\protect\path{#1}}
+\input{#1}
+\renewcommand{\min@file}{\relax}
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\inputminutes}
+%
+% \section{Topics and Subtopics}
+% \DescribeMacro{\topic}
+% The topics of a minutes are defined with \verb|\topic|,
+% \verb|\subtopic| and \verb|\subsubtopic|.
+% The check for an existing \verb|\maketitle| requires a special
+% definition of \verb|\topic|\par
+%
+% \verb|\addtopic| change \verb|\thesection|, so we save it here.
+% For the \verb|\subtopic| after a \verb|\addtopic| we need a counter.
+%    \begin{macrocode}
+\let\min@thesection=\thesection
+\@ifundefined{chapter}{
+\newcounter{min@section}[part]
+}{
+\newcounter{min@section}[chapter]
+}
+%    \end{macrocode}
+% \verb|\topic| check for \verb|\maketitle| and call \verb|\section|.
+%    \begin{macrocode}
+\newcommand*{\topic}[2][\minxx]{
+\min@checktitle
+%    \end{macrocode}
+% \changes{V1.5b}{2000/11/09}{write TOP before sectioning (german)}
+% In Germany the text "Top" is written in front of the topics. The
+% macro \verb|\min@toptext| contains this text.\footnote{Thanks to Peter Tillmann for this hint}.
+% If you do so, the
+% table of topics will become ugly, because of the long numbers.
+%    \begin{macrocode}
+\immediate\gdef\thesection{\min@toptext\xspace\min@thesection}
+\ifx\minxx#1\min@newcoltopic{\section}{#2}{#2}%
+\else\min@newcoltopic{\section}{#1}{#2}\fi%
+%%\let\thesection=\min@thesection %subtopic without "TOP"
+}
+%    \end{macrocode}
+%
+% \DescribeMacro{\addtopic}
+% With \verb|\addtopic| you can insert a topic without a number, but
+% within the list of topics. Here you can administrate the
+% difference between topics which where in an invitation and the
+% real topics.\par
+% A following \verb|\subtopic| will get a number in roman numbers.
+% For this we define the counter \verb|min@section| and we reset all
+% subsidiary counters.
+%\changes{V1.5}{2000/09/15}{Bug: \cmd{addtopic} and \Lpack{scrartlc}}
+%    \begin{macrocode}
+\newcommand*{\addtopic}[2][\minxx]{
+\min@checktitle
+\refstepcounter{min@section}
+\@ifundefined{chapter}{
+\immediate\gdef\thesection{(\min@toptext\xspace\@Roman\c@min@section)}
+}{
+\immediate\gdef\thesection{(\min@toptext\xspace\thechapter.\@Roman\c@min@section)}
+}
+\ifx\minxx#1\min@newcoltopic{\section}{#2}{#2}%
+\else\min@newcoltopic{\section}{#1}{#2}\fi%
+\global\addtocounter{section}{-1}
+%%%If you do not like the roman number
+%%\section*{#2}
+%%\ifx\minxx#1\addcontentsline{toc}{section}{#2}
+%%\else\addcontentsline{toc}{section}{#1}\fi%
+}
+%    \end{macrocode}
+%
+% \DescribeMacro{\min@checktitle}
+%Here we check with \verb|\ifminutes@titleset|, if the
+%title is printed. If not we make an error message.\par
+%After the first error message in a minutes, there is no
+%other error message in this minutes.
+%    \begin{macrocode}
+\newcommand{\min@checktitle}{
+\ifminutes@titleset\else
+\minutes@titlesettrue
+\PackageError{minutes.sty}{no output of title}{
+minutes.sty:\MessageBreak
+  You called the environment minutes,\MessageBreak
+  but you forgot to call the 'maketitle'.\MessageBreak
+  If you do not use twocolumn, you can continue.\MessageBreak
+  With twocolumn, you will become trouble later
+}%
+\fi}
+%    \end{macrocode}
+%
+% \DescribeMacro{\min@newcoltopic}
+% Because we are using \Lpack{multicols} the definition of
+% \verb|\min@newcoltopic| must contain a \verb|\end{multicols}| and the start
+% of a new \Lenv{multicols}-environment.
+% Parameter one contains \verb|\section| or \verb|\section*|.
+%    \begin{macrocode}
+\newcommand{\min@newcoltopic}[3]{
+\ifnum\value{columns} > 1
+\end{multicols}
+\hrulefill
+\begin{multicols}{\value{columns}}[{#1[#2]{#3}}]
+\else
+#1[#2]{#3}
+\fi
+}
+%    \end{macrocode}
+% \DescribeMacro{\subtopic}
+% \DescribeMacro{\subsubtopic}
+%    \begin{macrocode}
+\let\subtopic=\subsection
+\let\subsubtopic=\subsubsection
+%    \end{macrocode}
+%
+% \DescribeMacro{\minitopic}
+% Copy of \verb|\minisec| from \Lpack{scrrept.cls}.
+% There is no \verb|\let|, because of the freedom of the choice of the class.
+%    \begin{macrocode}
+\newcommand\minitopic[1]{\@afterindentfalse \vskip 1.5ex
+  {\parindent \z@ \textbf{#1}\par\nobreak}%
+  \@afterheading}
+%    \end{macrocode}
+%
+% \subsection{Finish and start the columns}
+%    \begin{macro}{\newcols}
+% If you want to finish the actual \Lenv{multicols} and restart it, you
+% can use \verb|\newcols|. The macro has two optional parameters:
+% a title and a new number of columns.\par
+% With \verb|\newcols[][1]| you can change the number of columns.
+% This number will be used until a new \Lenv{minutes} starts or
+% another \verb|\newcols| reset the value.
+% Store the first optional parameter in \verb|\min@newcolsTitle|
+% and start \verb|\min@newcols|.
+%    \begin{macrocode}
+\newcommand{\newcols}[1][\relax]{
+\global\def\min@newcolsTitle{#1}
+\min@newcols
+}
+%    \end{macrocode}
+%    \end{macro}%^^A {\newcols}
+%
+%    \begin{macro}{\min@newcols}
+% Close and open the minutes environment. In between modify
+% the counter \verb|columns|. The first optional parameter
+% for the new columns block is going on all columns.
+%    \begin{macrocode}
+\newcommand{\min@newcols}[1][\value{min@columns}]{
+\ifnum\value{columns} > 1
+\end{multicols}
+\fi
+\setcounter{columns}{#1}
+\ifnum\value{columns} > 1
+\begin{multicols}{\value{columns}}[\min@newcolsTitle][2cm]
+\else
+\min@newcolsTitle
+\fi
+}
+%    \end{macrocode}
+%    \end{macro}^^A {\min@newcols}
+%
+% \section{Different versions of minutes (secret parts)}
+%
+% With \verb|\includeversion{Env}| and \verb|\excludeversion{Env}|
+% you can prepare different versions of the minutes.
+%
+% Parts for special people can be between \verb|\begin{Env}| and
+% \verb|\end{Env}|.
+% By default the \verb|minutes.sty| contains an environment for
+% Secret parts.
+%
+% This coding is based on coding from \verb+version.sty+ of
+% Stephen Bellantoni 1990, loosely based on
+% "`annotation.sty"' by Tom Hofmann.
+% The command \verb|\includeversion| must be adapted for \Lpack{minutes.sty}.
+% See this example:
+% \begin{center}\begin{minipage}{10cm}
+%\begin{verbatim}
+%\begin{Secret}
+%\topic{xxx}
+%\end{Secret}
+%\end{verbatim}
+%\end{minipage}\end{center}
+%This will create an error, because \verb|\topic| will
+%closing the \Lenv{multicolumns}, but the last opened environment
+%was \Lenv{Secret}. So we have to manipulate a little bit the
+%actual name of the current environment. When we close
+%\Lenv{Secret} again, we must also close first our opened
+%\Lenv{multicols}.\par
+%
+% \DescribeMacro{\includeversion}
+% \DescribeMacro{\excludeversion}
+%    \begin{macrocode}
+\begingroup
+\catcode`@=11\relax%
+\catcode`{=12\relax\catcode`}=12\relax%
+\catcode`(=1\relax \catcode`)=2\relax%
+\gdef\includeversion#1(%
+  \expandafter\gdef\csname #1\endcsname%
+    (   \ifnum\value(columns) > 1
+        \def\@currenvir(multicols)
+        \fi
+    )%
+  \expandafter\gdef\csname end#1\endcsname%
+    (   \ifnum\value(columns) > 1
+        \def\@currenvir(#1)
+        \fi
+    )%
+)%
+\gdef\excludeversion#1(%
+  \expandafter\gdef\csname #1\endcsname%
+    (\@bsphack\catcode`{=12\relax\catcode`}=12\relax\csname #1@NOTE\endcsname)%
+  \long\expandafter\gdef\csname #1@NOTE\endcsname ##1\end{#1}%
+    (\csname #1END@NOTE\endcsname)%
+  \expandafter\gdef\csname #1END@NOTE\endcsname%
+    (\@esphack\end(#1))%
+)%
+\endgroup
+%    \end{macrocode}
+%
+% \subsection{Secret parts}
+% There is a possibility to mark secret parts of minutes. Short
+% secret parts can be defined with \verb|\secret|, longer secret
+% parts can be between \verb|\begin{Secret}| and
+% \verb|\end{Secret}|.
+%
+% \DescribeMacro{\secret}
+% \DescribeEnv{Secret}
+%    \begin{macrocode}
+\excludeversion{Secret}
+\excludeversion{Geheim}
+\newcommand{\secret}[1]{}
+\newcommand{\geheim}[1]{}
+\DeclareOption{Secret}{
+\includeversion{Secret}
+\includeversion{Geheim}
+\renewcommand{\secret}[1]{#1}
+\renewcommand{\geheim}[1]{#1}
+}
+%    \end{macrocode}
+%
+% %%%%%%%%%%%%%%
+% \subsection{Postscripts}
+% \begin{macro}{postscript}
+% \begin{environment}{Postscript}
+% The environment \Lenv{Postscript} is defined for additional
+% information, which belong not to the original minutes,
+% but they should inserted here.
+%    \begin{macrocode}
+\newcommand{\postscript}[1]{[\emph{#1}]}
+\newenvironment{Postscript}{
+\begin{description}
+\item[\min@textPostscript:]~\\ \em}{
+\em\end{description}}
+%    \end{macrocode}
+% \end{environment}
+% \end{macro}
+%
+% \section{Non-\LaTeXe documents}
+% \subsection{Foreign Minutes}
+%   \begin{macro}{\ForeignMinutes}
+% If you have minutes from a foreign system (e.g.\ from a
+% M\$-Product), you can start a \Lenv{Minutes}-environment.
+% Instead a \verb|\maketitle| you give the information, where you
+% find the foreign minutes.\par
+% Using the optional parameter, you can define free pages for the
+% printouts of the minutes, you want to insert. Default is one page.\par
+% In addition you can use all parameters of the
+% \Lenv{Minutes}-Environment.
+%    \begin{macrocode}
+\newcounter{@pagecount}%
+\newcommand{\foreignMinutes}[2][1]{%[pages]{Description}
+\ifnum #1 > 0
+\def\min@information{\min@textforeignMinutes: #2}
+\fi
+\maketitle
+\setcounter{@pagecount}{#1}\addtocounter{@pagecount}{-1}%
+\addtocounter{page}{\value{@pagecount}}%
+}
+%    \end{macrocode}
+%    \end{macro}%^^A    \ForeignMinutes
+%
+% \subsection{Attachements}
+% Data for the appendix with foreign documents are saved in a
+% *.min-File. The *.min-File is filled via the *.aux-file.
+%
+% \begin{macro}{\theminutes@attachment}
+% First we need some counter and their outputs.
+%    \begin{macrocode}
+\newcounter{minutes@page}
+\@ifundefined{chapter}{
+\newcounter{minutes@attachment}
+\renewcommand{\theminutes@attachment}{\roman{minutes@attachment}}
+}{
+\newcounter{minutes@attachment}[chapter]
+\renewcommand{\theminutes@attachment}{
+    \thechapter.\roman{minutes@attachment}}
+}
+%    \end{macrocode}
+% \end{macro}   %^^A{\theminutes@attachment}
+%
+%    \begin{macro}{\attachment}
+% With \verb|\attachment| you are able to define an attachment.
+% There are three parameters:
+%\begin{enumerate}
+%  \item a label [optional]. This value can be used for references with
+%  \verb|\ref| \ldots. With this parameter, you get also a reference to the
+%   page, where you have to insert the attachment.
+%  \item A title
+%  \item Number of pages.
+%\end{enumerate}
+%At the location, where you placed the \verb|\attachment| you get a
+%text `enclosure:', the title and with an defined label
+% a reference to the page, where you
+% should insert the attachment.\par
+%
+% First write the text "enclosure".
+%    \begin{macrocode}
+\newcommand{\attachment}[3][\relax]{%[label]{titel}{Seiten}
+\stepcounter{minutes@attachment}
+\par
+\min@textEnclosure\ \theminutes@attachment: #2
+\ifx\relax#1\else\min@textPage~\pageref{#1}\fi[#3]%
+%    \end{macrocode}
+% The add the informations to the *.aux-file. The value of the
+%second parameter of \verb|\contentsline| contains four parts.
+%These parts will be analysed by \verb|\l@attachment|.
+%    \begin{macrocode}
+\addcontentsline{\min@file@Att}{attachment}{%
+    {#1}{\theminutes@attachment}{#2}{#3}}
+}%^^A       \attachment
+%    \end{macrocode}
+%    \end{macro}%^^A    attachment
+%
+% \DescribeMacro{\listofattachments}
+% Bugs:
+% \begin{itemize}
+%   \item empty list is not supressed!!!!
+%   \item If the list is longer then two pages, the next numbering
+%   will be wrong.
+% \end{itemize}
+%
+%    \begin{macrocode}
+\newcommand{\listofattachments}{
+\ifhyperloaded
+\renewcommand{\contentsline}[4]{
+\csname l@##1\endcsname{##2}{##3}
+}
+\fi
+\renewcommand\@pnumwidth{2em}%Original: 1.55em
+\setcounter{minutes@page}{\value{page}}\stepcounter{minutes@page}
+{\@starttoc{\min@file@Att}}
+\clearpage
+\setcounter{page}{\value{minutes@page}}%
+}
+%    \end{macrocode}
+%
+%    \begin{macro}{\l@attachment}
+% \verb|\l@attachment| is called by \verb|\contentsline|.
+%
+% Parameter two contains the page, where the attachment is
+% inserted. This value is not used (do we need a back reference?)
+%
+% Parameter one contains the four variables from \verb|\attachment|.
+% To parse this, we expand them, before we call \verb|\min@l@attachment|
+%
+% Hyperref modify the parameters for \verb|\l@attachment|.
+%    \begin{macrocode}
+\newcommand{\l@attachment}[2]{%
+\expandafter\min@l@attachment#1
+}%^^A       \listofAttachments
+%    \end{macrocode}
+%    \end{macro}%^^A \l@attachment
+%
+%    \begin{macro}{\min@l@attachment}
+%The command \verb|\min@l@attachment| prepares a line for the
+%list of the attachments and it makes an entry to the aux-file for
+%the table of contents and the label.
+%
+% First the output. Here we use the macro \verb|\contentsline|.
+%    \begin{macrocode}
+\newcommand{\min@l@attachment}[4]{%{label}{theattachment}{title}{pages}
+\@dottedtocline{1}{0mm}{20mm}{%
+\numberline {#2} #3}{%
+\arabic{minutes@page} [#4]}
+%    \end{macrocode}
+%
+%The entry to the aux-file should be done normally with
+%\verb|\addcontentsline| and \verb|\label|, but this commands give
+%the actual number of the page. We want to give our own numbering.
+%So we need to create the toc-entry and labels on our own.\par
+%
+% Prepare the label information.
+%    \begin{macrocode}
+\ifx\relax#1\else
+\ifhyperloaded
+\protected@write\@auxout{}%
+{\string\newlabel%
+{#1}%Label
+{%
+{#2}%number of section
+{\arabic{minutes@page}}%pagenumber
+{#2\relax }%title+\relax
+{section.\thesection}%"section"+sectionnumber
+{}%
+}%closenewlabel
+}%close \protected@write
+\else% hyperref is not used
+\protected@write\@auxout{}%
+{\string\newlabel{#1}{{#2}{\arabic{minutes@page}}}}%
+\fi%\ifhyperloaded
+\fi%\ifx\relax
+%    \end{macrocode}
+% Increase the internal pagenumber for the list.
+%    \begin{macrocode}
+\addtocounter{minutes@page}{#4}%
+}%\def\min@l@attachment
+%    \end{macrocode}
+%    \end{macro}%^^A    \min@l@attachment
+%
+% \subsection{Compatibility with old version}
+%    \begin{macro}{\enclosure}
+% The macro \verb|\enclosure| is used for compatibility with an old version.
+% It is the same behaviour as \verb|attachment|, the sequence of
+% parameters is modified.
+%    \begin{macrocode}
+\newcommand{\enclosure}[3][1]{%[pages]{label}{titel}
+\attachment[#2]{#3}{#1}
+}%^^A       \enclosure
+\let\listofenclosure\listofattachments
+%    \end{macrocode}
+%    \end{macro}%^^A    enclosure
+%
+%
+% \section{Some Macros for Votes}
+% \changes{V1.6c}{2001/09/19}{new layout/version}
+%
+%
+%    \begin{macro}{\vote}
+% \changes{V1.5b}{2000/12/30}{reconstruction Vote-environment}
+% The syntax of this macro is
+%     \verb|\vote{text}{yes}{no}{no vote}[decision]|.
+% Each number (yes/no/no vote) can get a text on its own. For better
+% understanding, look to the samples.
+%
+% First the title is written to \verb|\min@voteT|, then we call
+% \verb|\min@voteI| to parse the optional texts for "yes".
+%    \begin{macrocode}
+\newcommand{\vote}[1]{
+\gdef\min@voteT{#1}
+\min@voteI}
+%    \end{macrocode}
+%    \end{macro}%^^A    vote
+%    \begin{macro}{\min@voteI}
+%    Read the text and number of yes-votes and save them. The next
+%    macros do the same for no\ldots
+%    \begin{macro}{\min@voteTI}
+%    \begin{macro}{\min@voteVI}
+%    \begin{macrocode}
+\newcommand{\min@voteI}[2][\min@textYes]{
+\gdef\min@voteTI{#1}
+\gdef\min@voteVI{#2}
+\min@voteII
+}
+%    \end{macrocode}
+%    \end{macro}
+%    \end{macro}
+%    \end{macro}
+%    \begin{macro}{\min@voteII}
+%    \begin{macro}{\min@voteTII}
+%    \begin{macro}{\min@voteVII}
+%    Now we fill the values for "no".
+%    \begin{macrocode}
+\newcommand{\min@voteII}[2][\min@textNo]{
+\gdef\min@voteTII{#1}
+\gdef\min@voteVII{#2}
+\min@voteIII
+}
+%    \end{macrocode}
+%    \end{macro}
+%    \end{macro}
+%    \end{macro}
+%    \begin{macro}{\min@voteIII}
+%    \begin{macro}{\min@voteTIII}
+%    \begin{macro}{\min@voteVIII}
+% And now the values for "no vote".
+%    \begin{macrocode}
+\newcommand{\min@voteIII}[2][\min@textNoVote]{
+\gdef\min@voteTIII{#1}
+\gdef\min@voteVIII{#2}
+\min@voteIV
+}
+%    \end{macrocode}
+%    \end{macro}%^^A    Votes
+%    \end{macro}
+%    \end{macro}
+%
+%    \begin{macro}{\min@voteIV}
+% |\min@voteIV| calls |\min@voteV|. There is the final preparation
+% of a vote.
+%    \begin{macrocode}
+\newcommand{\min@voteIV}[1][\min@empty]{
+\min@voteV{#1}
+}
+%    \end{macrocode}
+%    \end{macro}%^^A    Votes
+%
+%    \begin{macro}{\min@voteV}
+% |\min@voteV| is a dummy for the final preparation of a vote. The
+% real macro is defined by an option. Default is |\min@voteIVlist|.
+% If you want to change the look, add a new macro and replace it
+% here. There are the following parameters:
+% \begin{itemize}
+%   \item |\min@voteT| The text of the decision.
+%   \item |min@voteVI| and |\min@voteTI| Number of "yes" (and Text
+%   "yes".
+%   \item |min@voteVII| and |\min@voteTII| Number of "no" (and Text)
+%   \item |min@voteVIII| and |\min@voteTIII| Number of "no vote" (and Text)
+% \end{itemize}
+%    \begin{macrocode}
+\newcommand{\min@voteV}{\min@voteIVlist}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\minustesstyle/vote}
+% \label{sec:vote:look}
+% With the command |\minutesstyle| you can define different
+% parameters of a minutes. Here the definitions for votes.
+% There are two possibilities:
+% \begin{itemize}
+%   \item |\minutesstyle{vote={list}|
+%   \item |\minutesstyle{vote={table}|
+% \end{itemize}
+%    \begin{macrocode}
+\define@key{min@style}{vote}{
+    \newif\ifmin@nofound
+    \min@nofoundtrue
+    \def\min@xx{#1}
+    \def\min@yy{list}
+    \ifx\min@xx\min@yy
+        \renewcommand{\min@voteV}{\min@voteIVlist}
+        \min@nofoundfalse
+    \fi
+    \def\min@yy{table}
+    \ifx\min@xx\min@yy
+        \renewcommand{\min@voteV}{\min@voteIVtable}
+        \min@nofoundfalse
+    \fi
+    \ifmin@nofound
+        \PackageError{minutes.sty}{Unknown Vote-Style}{
+            minutes.sty:\MessageBreak
+            You try to use the style #1 for votes.\MessageBreak
+            This style is unknown}%
+    \fi
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\min@voteIVtable}
+% \verb|\min@voteIVtable| close and open a tabular-environment.
+% This allows a page break between two votes.
+% longtab.sty would allow the same behavior, but I want to keep the number
+% of needed packages low.\par
+% First we define the length for the width of an vote-box.
+% The width will a quarter of the total place, but not more
+% than 2 cm. The total place is the \verb|\linewidth|.
+% \changes{2001/09/20}{V1.6c}{add decisions to list of decisions}%
+%    \begin{macrocode}
+\newlength{\votelength}
+\newcommand{\min@voteIVtable}[1]{
+    \setlength{\votelength}{0.25\linewidth}
+    \ifdim\votelength > 2cm \setlength{\votelength}{2cm} \fi
+    \par\noindent
+    \begin{tabular}{*{3}{p{\votelength}}}% \hline
+    \multicolumn{3}{p{3\votelength}}{\min@voteT}\\\hline
+    \tiny \min@voteTI & \tiny \min@voteTII & \tiny \min@voteTIII \\
+    \hfill \min@voteVI & \hfill \min@voteVII
+            & \hfill \min@voteVIII\\\hline
+    \ifx\min@empty#1\else%
+        \multicolumn{3}{p{3\votelength}}{\decision{-}{#1}}%
+    \fi
+    \end{tabular}\par
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\min@voteIVlist}
+% \verb|\min@voteIVlist| shows the result in a list with "yes, "no"\ldots
+%    \begin{macrocode}
+\newcommand{\min@voteIVlist}[1]{
+    \par
+    \begin{tabular}{ll}
+    \multicolumn{2}{p{0.9\textwidth}}{\min@voteT}\\
+    \min@voteTI:    & \min@voteVI\\
+    \min@voteTII:   & \min@voteVII\\
+    \min@voteTIII:  &\min@voteVIII\\
+    \ifx\min@empty#1\else%
+        \multicolumn{2}{p{0.9\textwidth}}{\decision{-}{#1}}%
+    \fi
+    \end{tabular}\par
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \subsubsection{Old environment/macros}
+% \begin{environment}{Vote}
+% If you want to hold some votes together, use a
+% \Lenv{Vote}-Environment. There was a sense for it
+% before Version V1.6c.
+%    \begin{macrocode}
+\newenvironment{Vote}{
+    \setlength{\parindent}{0mm}
+}{}
+%    \end{macrocode}
+% \end{environment} ^^A Vote
+%
+%    \begin{macro}{\Onevote}
+% \verb|\Onevote| was defined in version less V1.6c.
+% For compatibility it is remained.
+%    \begin{macrocode}
+\newcommand{\Onevote}{\vote}
+%    \end{macrocode}
+%    \end{macro}%^^A    OneVote
+%
+%\section{Decisions}
+%
+% You can insert the list of decisions with the command
+% \verb|\listofdecisions|
+%
+% \subsection{Declare decisions}
+%Decisions are taken down in the command \verb|\decision|.
+%Each decision will be put to an overview of all decisions
+%(glossary). So decisions must belong to a decision theme.
+%
+%    \begin{macro}{\decisiontheme}
+%The command \verb|\decisiontheme| has two parameter: A
+%classifier and a Title. All decisions must be assigned to one of these
+% classified decisions.
+%    \begin{macrocode}
+\newcommand{\decisiontheme}[2]{
+\@ifundefined{chapter}{
+\addcontentsline{\min@file@Dec}{decisiontheme}{{#1}{#2}{\thepart}}
+}{
+\addcontentsline{\min@file@Dec}{decisiontheme}{{#1}{#2}{\thechapter}}
+}%
+}
+%    \end{macrocode}
+%    \end{macro}%^^A    \decisiontheme
+%
+%    \begin{macro}{\decision}
+% Called with:
+% \verb|\decision{Theme}{Short descr}[long]| or
+% \verb|\decision*{...|.\par
+% The asterisk-version will not produce an entry in the
+% list of all decisions.\par
+% Here we check the asterisk.
+%    \begin{macrocode}
+\newcommand{\decision}[2]{%
+\def\min@decisionTheme{#1}%
+\def\min@decisionShorttext{#2}%
+\min@decision%
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\min@decision}
+%    \begin{macrocode}
+\newcommand{\min@decision}[1][\min@xx]{%
+\if*\min@decisionTheme\else%
+\@ifundefined{chapter}{%
+\addcontentsline{\min@file@Dec}{decision}{%
+    {\min@decisionTheme}{\min@decisionShorttext}{\thepart}}%
+}{%
+\addcontentsline{\min@file@Dec}{decision}{%
+    {\min@decisionTheme}{\min@decisionShorttext}{\thechapter}}%
+}%
+\fi%
+\par\noindent\textbf{\min@textDecision\ifx*\min@decisionTheme$^*$\fi: }%
+\min@decisionShorttext\par%
+\ifx#1\min@xx\else%
+\begin{quote}\small #1\end{quote}%
+\fi%
+}
+%    \end{macrocode}
+%    \end{macro}%^^A    \min@decision
+%
+%\subsection{Output of the list of decisions}
+%    \begin{macro}{\listofdecisions}
+% If hyperref is loaded, \verb|\contentsline| must be modified.
+%    \begin{macrocode}
+\newcommand{\listofdecisions}{
+\ifhyperloaded
+\renewcommand{\contentsline}[4]{
+\csname l@##1\endcsname{##2}{##3}
+}
+\fi
+\@starttoc{\min@file@Dec}
+}% \listofdecisions
+%    \end{macrocode}
+%    \end{macro}    %^^A\listofdecisions
+%
+% \begin{macro}{\l@decisiontheme}
+% \begin{macro}{\min@l@decisiontheme}
+% Here it is defined how one line for the theme looks like.
+%    \begin{macrocode}
+\newcommand{\l@decisiontheme}[2]{
+\expandafter\min@l@decisiontheme#1
+}
+\newcommand{\min@l@decisiontheme}[3]{%Theme}{Decision}{Chapter}
+\noindent\textbf{#2}\par
+}
+%    \end{macrocode}
+% \end{macro}    %^^A{\l@decisiontheme}
+% \end{macro}    %^^A{\min@l@decisiontheme}
+%
+% \begin{macro}{\l@decision}
+% \begin{macro}{\min@l@decision}
+% Here it is defined how one line for the decision looks like.
+%    \begin{macrocode}
+\newcommand{\l@decision}[2]{
+\noindent\expandafter\min@l@decision#1{#2}
+}
+\newcommand{\min@l@decision}[4]{%{Theme}{Decision}{Chapter}{page}
+\@dottedtocline{1}{0mm}{0mm}{#2}{#4}
+}
+%    \end{macrocode}
+% \end{macro}   %^^A{\l@decision}
+% \end{macro}   %^^A{\min@l@decision}
+%
+% \subsection{Argumentations}
+% \begin{environment}{Argumentation}
+% \changes{V1.4b}{2000/07/24}{Added the environment Argumentation with pro and contra}
+% Before you make a decision you want to discuss the problem.
+% A comparison of arguments can be done with \Lopt{Argumentation}.
+%
+%    \begin{macrocode}
+\newenvironment{Argumentation}{\begin{itemize}}{\end{itemize}}
+%    \end{macrocode}
+% \end{environment} %^^A{Argumentation}
+%
+% \begin{macro}{\pro}   \begin{macro}{\Pro}
+% \begin{macro}{\contra}\begin{macro}{\Contra}
+% \begin{macro}{\result}
+% The macros \verb|\pro| and \verb|\contra| (respective the big
+% alternatives) define argument for and against the discussed point.
+% \verb|\result| gives a result.
+%    \begin{macrocode}
+\newcommand{\pro}{\item[\textcircled{+}]}
+\newcommand{\Pro}{\item[\textbf{\textcircled{+}}]}
+\newcommand{\contra}{\item[\textcircled{-}]}
+\newcommand{\Contra}{\item[\textbf{\textcircled{-}}]}
+\newcommand{\result}{\item[$\Rightarrow$]}
+%    \end{macrocode}
+% \end{macro}               %^^A\result
+% \end{macro}\end{macro}    %^^A\contra/\Contra
+% \end{macro}\end{macro}    %^^A\pro/\Pro
+%
+%
+% \section{Tasks}
+% \changes{V1.6b}{2001/02/18}{task possible outside minutes environment}
+% \begin{macro}{\task}
+% Tasks are defined with the macro \verb|\task|. There are
+% following parameters:
+% \begin{itemize}
+%   \item {}[optional] Date of completion.\par
+%   If this parameter is not set, the task will be listed in the
+%   list of all open tasks. If it is filled a footnote is printed
+%   with the information.
+%   \item Responsible person. An Asterisk means `anybody' and
+%   nothing is printed.
+%   \item {}[optional] Date to to it
+%   \item What to do.
+% \end{itemize}
+% If \verb|\task| is used outside the minutes environment, we need the macro
+% \verb|\min@date|.
+%    \begin{macrocode}
+\let\min@date\relax
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\newcommand{\task}[2][\relax]{
+\def\min@taskDone{#1}
+\def\min@taskWho{#2}
+\min@task
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\task}
+% \changes{V1.4B}{2000/08/10}{date and fileinfo of the minutes in task list}
+% \begin{macro}{\min@task}
+%    \begin{macrocode}
+\newcommand{\min@task}[2][\relax]{
+\def\min@taskWhen{#1}
+\def\min@taskWhat{#2}
+\ifx\relax\min@file
+    \def\min@fileinfo{}
+\else
+    \def\min@fileinfo{\min@file/\the\inputlineno}
+\fi
+\def\min@space{}
+\par\noindent\textbf{\min@textTask}%
+\if\relax\min@taskWhen\else\ (\min@taskWhen)\fi%
+\if\relax\min@taskDone{%
+\@ifundefined{chapter}{%
+\addcontentsline{minTsk}{task}{\protect\minutestask%
+   {\min@taskWhat}{\thepart}{\min@taskWhen}%
+   {\min@taskWho}{\min@date}{\min@fileinfo}}%
+}{%
+\addcontentsline{minTsk}{task}{\protect\minutestask%
+   {\min@taskWhat}{\thechapter}{\min@taskWhen}%
+   {\min@taskWho}{\min@date}{\min@fileinfo}}%
+}%chapter defined
+}\else%\relax\min@taskDone
+\ifx\min@space\min@taskDone\else\footnote{\min@taskDone}\fi%
+\fi%\relax\min@taskDone
+:
+\min@taskWhat\
+\if*\min@taskWho\else (\min@taskWho)\fi
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\min@task}
+%
+%\subsection{Output of the list of tasks}
+%    \begin{macro}{\listoftasks}
+%    \begin{macrocode}
+\newcommand{\listoftasks}[1][\relax]{
+\bgroup
+\ifhyperloaded
+\renewcommand{\contentsline}[4]{
+\csname l@##1\endcsname{##2}{##3}
+}
+\fi
+\ifx\relax#1
+\@starttoc{minTsk}
+\else
+\PackageWarning{minutes.sty}{
+    foreign minTsk -> Check Hyper\MessageBreak
+    You are using the list of tasks with tasks from a foreign
+    document\MessageBreak
+    This document must use the hyperref-package like this document.
+}%
+{\InputIfFileExists{#1.minTsk}{}{}}
+\fi
+\egroup
+}% \listoftasks
+%    \end{macrocode}
+%    \end{macro}    %^^A\listoftasks
+%
+% To write one task, we must define the width for the responsible persons.
+% If somebody want's to modify it, just set another value for
+% \verb|\min@responsiblelength|. This
+% value reduce the place for the tasks itself.
+%    \begin{macrocode}
+\newlength{\responsiblelength}
+\setlength{\responsiblelength}{0.15\linewidth}
+%    \end{macrocode}
+%
+% \begin{macro}{\l@task}
+% Call \verb|\minutestask| from task-file with the page information.
+%    \begin{macrocode}
+\newcommand{\l@task}[2]{#1{#2}}
+%    \end{macrocode}
+% \end{macro}%^^A{\l@task}
+%
+% \begin{macro}{\minutestask}
+% Write one task in the list of all tasks. There are a lot of data,
+% and it is a problem who to print them in a nice way.
+%
+% \verb|\minutestask| contains following information:
+% \begin{enumerate}
+%   \item Text of the task
+%   \item Minutes where the task is defined
+%   \item When the task should be done
+%   \item Who should do the task. Asterisk is for anybody.
+%   \item Date of the minutes (defined by \verb|\minutesdate|)
+%   \item Page in the document, where the task is defined.
+% \end{enumerate}
+%
+% \changes{1.6B}{2001/03/09}{Hint from Albert Sill: with scrartcl in unneeded / in listoftasks}
+%    \begin{macrocode}
+\newcommand{\minutestask}[7]{%
+%       {What}{section}{When}{Who}{date}{file}{page}
+\if*#4
+\def\min@l@taskWho{\min@textAnybody}
+\else
+\def\min@l@taskWho{#4}
+\fi
+\def\numberline##1{\parbox[t]{\responsiblelength}{##1\hfil}~}
+\@dottedtocline{1}{0mm}{\responsiblelength}{
+\numberline{\min@l@taskWho}
+\if\relax#3\else$\hookrightarrow$ #3\\\fi%date to do
+#1 \if\relax#5\else (#5)\fi%Text (date of minutes)
+\ifmin@fileinfo\footnotesize\relax~[#6]\fi}%File/linenumber
+{#2\ifx#2\empty\else/\fi#7}%sec/page,
+}
+%    \end{macrocode}
+% \end{macro}%^^A{\minutestask}
+%
+%
+% \section{Schedule}
+% \begin{macro}{\schedule}
+% Called as \verb|\schedule*[File]{yyyy/mm/dd}[xx:xx]{What}|. The
+% first optional parameter defines the filename of the
+% \file{cld}-File. Default is \verb|\jobname|.
+%
+% There are only pseudo parameters.
+% There is a sequence of actions:
+% \begin{enumerate}
+%   \item \verb|\schedule| checks for an asteriks and after it, it calls
+%   \verb|\min@scheduleStar| or \verb|\min@scheduleNoStar|.
+%   \item \verb|\min@scheduleStar| or \verb|\min@scheduleNoStar| set
+%   a flag and then they call \verb|\min@scheduleI|.
+%   \item \verb|\min@scheduleI| saves the optional jobname and the
+%   date. After this \verb|\min@scheduleII| is called.
+%   \item \verb|\min@scheduleII| read the rest of the data and do
+%   the work.
+% \end{enumerate}
+%
+% Better: \verb|\appointment|, \verb|\event|?
+%    \begin{macrocode}
+\newcommand*{\schedule}{\@ifstar\min@scheduleStar\min@scheduleNoStar}
+\newif{\ifmin@scheduleStar}
+\newcommand{\min@scheduleNoStar}{\global\min@scheduleStarfalse\min@scheduleI}
+\newcommand{\min@scheduleStar}{\global\min@scheduleStartrue\min@scheduleI}
+%    \end{macrocode}
+%    \end{macro} %^^A \schedule
+%
+% \begin{macro}{\min@scheduleI}
+%    \begin{macrocode}
+\newcommand*{\min@scheduleI}[2][\jobname]{%[file]{yyyy/mm/dd}
+\def\min@sch@file{#1}
+\def\min@sch@date{#2}
+\min@scheduleII
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \begin{macro}{\min@scheduleII}
+%    \begin{macrocode}
+\newcommand*{\min@scheduleII}[2][]{%[time]{schedule text}
+\def\min@sch@time{#1}
+\def\min@sch@text{#2}
+\min@scheduleIII
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \begin{macro}{\min@scheduleIII}
+%
+% Write the schedule line. The date is bold, rest normal.
+% The date is built by the defined format for a date.
+%
+% In addition an entry to the \file{aux}-File is created with all
+% parameters. This entry can be used to create a \file{cld}-File for
+% \Lpack{calendar.sty}
+% \changes{V1.5b}{2000/12/19}{Modified look for dates}
+%    \begin{macrocode}
+\newcommand{\min@scheduleIII}[1][\min@xx]{%[long text]
+    \par\noindent\emph{\expandafter\min@writedate \min@sch@date/%
+          \ifx\@empty\min@sch@time\else\ \min@sch@time\fi:}
+    \min@sch@text
+  \ifx#1\min@xx\else\nobreak%
+    \begin{list}{}{\setlength{\leftmargin}{1em}\setlength{\partopsep}{\parsep}}
+    \item #1
+    \end{list}
+  \fi\par%
+  \ifmin@scheduleStar\else
+   \ifx#1\min@xx%
+    \addcontentsline{\min@file@Cld}{schedule}{\protect\min@l@schedule{\min@sch@file}%
+                    {\min@sch@date}{\min@sch@time}{\min@sch@text}{}}
+   \else
+    \addcontentsline{\min@file@Cld}{schedule}{\protect\min@l@schedule{\min@sch@file}%
+                    {\min@sch@date}{\min@sch@time}{\min@sch@text}{#1}}
+   \fi
+  \fi
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \begin{macro}{\min@writedate}
+% ^^A check CTAN/macros/latex/contrib/supported/isodate
+% Fill \verb|\day|\ldots and call \verb|\today| for a language specific
+% printout of the date. The modification of \verb|\day|\ldots are local.
+%    \begin{macrocode}
+\def\min@writedate#1/#2/#3/{
+\day=#3
+\month=#2
+\year=#1
+\today
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%
+% \subsection{Commands to prepare \file{cld}-File}
+% \changes{V1.3}{2000/07/22}{Support of calendar.sty}
+% Preparation can be called by an option \Lopt{CreateCld}.
+%    \begin{macrocode}
+\DeclareOption{CreateCld}{\prepareCal}
+%    \end{macrocode}
+%
+% \begin{macro}{\prepareCal}
+% Extract data from \file{aux} and fill \file{cld}. The target file
+% is in the optional parameter.
+%    \begin{macrocode}
+\newcommand{\prepareCal}[1][\jobname]{
+\ifhyperloaded
+\renewcommand{\contentsline}[4]{
+\csname l@##1\endcsname{##2}{##3}
+}
+\fi
+\newwrite\cld
+\gdef\min@calfilename{#1}
+\immediate\openout\cld=#1.cld
+\@starttoc{\min@file@Cld}
+\immediate\closeout\cld %
+}
+%    \end{macrocode}
+%    \end{macro}    %^^A\prepareCal
+%
+% \begin{macro}{\l@schedule}
+% This macro is called from \verb|\@starttoc|. The first parameter
+% contains the data in the macro \verb|\min@l@schedule|.
+%    \begin{macrocode}
+\newcommand{\l@schedule}[2]{#1}
+%    \end{macrocode}
+%    \end{macro}    %^^A\l@schedule
+%
+% \begin{macro}{\min@l@schedule}
+% Writes one entry to the \file{cld}-File.
+% If \#4 or \#5 is complex, there is an overflow.
+%    \begin{macrocode}
+\newcommand{\min@l@schedule}[5]{%{file}{date}{time}{what}{longtext}
+\let\"\relax%no expansion for "Umlaute"
+\let\ss\relax%no expansion for sz
+\catcode`\"12\relax%"is normal
+\def\min@xx{#5}
+%\def\min@temp{#1}
+%\if\jobname\min@calfilename--> output to other file.cld
+\ifx\min@xx\@empty
+\immediate\write\cld{\expandafter\min@writecal#2/ #3 {#4}}
+\else
+%%This is not robust
+%%\immediate\write\cld{\expandafter\min@writecal#2/ #3 {#4}[#4:\noexpand\\ #5]}
+%%This is robust, but not the expected behaviour.
+\immediate\write\cld{\expandafter\min@writecal#2/ #3 {#4}}
+\fi
+}
+%    \end{macrocode}
+%    \end{macro}    %^^A\l@schedule
+%
+% \begin{macro}{\min@writecal}
+% Write the date in a version, understood by \Lpack{calendar.sty}.
+% Without the dot after the month there is no space between month
+% and year. A \verb|\ | is not extracted and can not be interpreted
+% by \Lpack{calendar.sty}.
+%    \begin{macrocode}
+\def\min@writecal#1/#2/#3/{
+#3
+\ifcase#2 \or jan\or feb\or mar\or apr\or may\or
+jun\or jul\or aug\or sep\or oct\or nov\or dec\fi.
+ #1
+}
+%    \end{macrocode}
+%    \end{macro}    %^^A\min@writecal
+%
+% \section{Multilingual texts, Support of Babel.sty}
+% \subsection{German commands}\label{german!commands}
+% \begin{macro}{German Alias}
+% German minutetaker can use german macros. There is no difference
+% in the look or the handling of the parameters, the german macros
+% are only alias.\par
+% \DescribeMacro{german header macros}
+%    \begin{macrocode}
+\let\Protokoll\Minutes
+\let\endProtokoll\endMinutes
+\let\untertitel\subtitle
+\let\moderation\moderation
+\let\protokollant\minutetaker
+\let\teilnehmer\participant
+\let\sitzungsdatum\minutesdate
+\let\sitzungsbeginn\starttime
+\let\sitzungsende\endtime
+\let\sitzungsort\location
+\let\gaeste\guest
+\let\verteiler\cc
+\let\fehlend\missing
+\let\fehlendEntschuldigt\missingExcused
+\let\fehlendUnentschuldigt\missingNoExcuse
+%\let\protokollKopf\min@maketitle%->in \begin{Minutes}
+\let\fremdProtokoll\foreignMinutes
+%    \end{macrocode}
+% \DescribeMacro{german topic macros}
+% \verb|\topic| is also ok for german.
+%    \begin{macrocode}
+\let\neueSpalte\newcols
+\let\zusatztopic\addtopic
+%    \end{macrocode}
+% \DescribeMacro{german voting macros}
+%    \begin{macrocode}
+\newenvironment{Abstimmung}{\begin{Vote}}{\end{Vote}}
+\let\abstimmung\vote
+\let\Einzelabstimmung\Onevote
+%    \end{macrocode}
+% \DescribeMacro{german argumentations}
+%    \begin{macrocode}
+\let\ergebnis\result
+%    \end{macrocode}
+% \DescribeMacro{german decision macros}
+%    \begin{macrocode}
+\let\beschluss\decision
+\let\beschlussthema\decisiontheme
+\let\beschlussliste\listofdecisions
+%    \end{macrocode}
+%
+% \DescribeMacro{german task macros}
+%    \begin{macrocode}
+\let\aufgabe\task
+\let\aufgabenliste\listoftasks
+%    \end{macrocode}
+%
+% \DescribeMacro{german schedule macros}
+%    \begin{macrocode}
+\let\termin\schedule
+%    \end{macrocode}
+% \DescribeMacro{german attachment macros}
+%    \begin{macrocode}
+\let\anhang\attachment
+\let\anhangsliste\listofattachments
+%    \end{macrocode}
+% \DescribeMacro{other german macros}
+%    \begin{macrocode}
+\let\nachtrag\postscript
+\newenvironment{Nachtrag}{\begin{Postscript}}{\end{Postscript}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{The texts of \texttt{minutes.sty}}
+% For multilingual use, the packet expect the use of babel.sty.
+% If babel.sty is not used, the last defined language will be used
+% (up to now german).
+%    \begin{macro}{\addto}
+%    \begin{macrocode}
+\@ifundefined{addto}{\newcommand{\addto}[2]{#2}}{\relax}
+%    \end{macrocode}
+%    \end{macro}
+% Now the definition of the german and english text.
+%    \begin{macro}{\extrasenglisch}
+%    \begin{macrocode}
+\addto\extrasenglish{
+\def\min@textModerator{Moderation}
+\def\min@textMinutesTaker{Minutes taker}
+\def\min@textPresent{Those present} %Participiant:
+\def\min@textAbsent{Absent}
+\def\min@textAbsentExcused{\min@textAbsent (excused)}
+\def\min@textAbsentNoExcuse{\min@textAbsent (not excused)}
+\def\min@textGuest{Guest}
+\def\min@textDate{Date}
+\def\min@textStarttime{Begin of the meeting}
+\def\min@textEndtime{End of the meeting}
+\def\min@textLocation{Location of the meeting}
+\def\min@textCc{Distribution}
+\def\min@textPostscript{Postscript}
+\def\min@textEnclosure{Enclosure}
+\def\min@textforeignMinutes{Foreign minutes}
+\def\min@textSecret{including non-public informations}
+\def\min@textPage{page}
+\def\min@toptext{}%Text before Topic
+\def\min@textForeign{(no \LaTeXe -minute)}
+\def\min@textYes{Yes}
+\def\min@textNo{No}
+\def\min@textNoVote{no vote}
+\def\min@textDecision{Decision}
+\def\min@textTask{Task}
+\def\min@textResponsible{Responsible}
+\def\min@textAnybody{Anybody}
+\@ifundefined{chapter}{
+    \renewcommand{\partname}{Minutes}
+    \renewcommand{\ptctitle}{Overview of topics}
+    }{
+    \renewcommand{\chaptername}{Minutes}
+    \def\mtctitle{List of topics}
+    }
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\min@germanText}
+% And the german textes. German got a new spelling,
+% so we have to define it for german and ngerman.
+% The texts in this packet are written in the same manner for both
+% spellings.
+%    \begin{macrocode}
+\def\min@germanText{
+\def\min@textModerator{Moderation}
+\def\min@textMinutesTaker{Protokollant}
+\def\min@textPresent{Anwesend}
+\def\min@textAbsent{Fehlend}
+\def\min@textAbsentExcused{\min@textAbsent (entschuldigt)}
+\def\min@textAbsentNoExcuse{\min@textAbsent (unentschuldigt)}
+\def\min@textGuest{G\"aste}
+\def\min@textDate{Datum}
+\def\min@textStarttime{Beginn der Sitzung}
+\def\min@textEndtime{Ende der Sitzung}
+\def\min@textLocation{Sitzungsort}
+\def\min@textCc{Verteiler}
+\def\min@textPostscript{Nachtrag}
+\def\min@textEnclosure{Anhang}
+\def\min@textforeignMinutes{Fremdes Protokoll}
+\def\min@textSecret{mit nicht\"offentlichen Informationen}
+\def\min@textPage{Seite}
+\def\min@textForeign{(kein \LaTeXe -Protokoll)}
+\def\min@textYes{Ja}
+\def\min@textNo{Nein}
+\def\min@textNoVote{Enthaltung}
+\def\min@textDecision{Beschlu{\ss}}
+\def\min@textTask{Aufgabe}
+\def\min@textResponsible{Verantwortlich}
+\def\min@textAnybody{Irgendwer}
+\def\min@toptext{}%Top} %-> ugly table of contents
+\@ifundefined{chapter}{
+    \renewcommand{\partname}{Protokoll}
+    \renewcommand{\ptctitle}{Tagesordnung}
+    }{
+    \renewcommand{\chaptername}{Protokoll}
+    \renewcommand{\mtctitle}{Tagesordnung}
+    }
+}
+%    \end{macrocode}
+% \DescribeMacro{\extrasgerman}
+% \DescribeMacro{\extrasngerman}
+%    \begin{macrocode}
+\addto\extrasgerman{\min@germanText}
+\addto\extrasngerman{\min@germanText}
+%    \end{macrocode}
+%    \end{macro}
+%
+% \section{Execute the Options}
+%    \begin{macrocode}
+\ProcessOptions\relax
+%    \end{macrocode}
+% \PrintIndex
+% \Finale
+%\iffalse
+%</package>
+%\fi
+% \end{document}
diff --git a/Master/texmf-dist/source/latex/minutes/minutes.ins b/Master/texmf-dist/source/latex/minutes/minutes.ins
new file mode 100644
index 00000000000..c40111ea37a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/minutes/minutes.ins
@@ -0,0 +1,101 @@
+\def\batchfile{minutes.ins}
+\input docstrip.tex
+\keepsilent
+% For documentation with index and changes, run:
+%   latex minutes
+%   latex minutes
+%   makeindex -s gglo -o minutes.gls minutes.glo
+%   makeindex -s gind -o minutes.ind minutes.idx
+%   latex minutes
+% 
+% or for PDF-Documentation run
+%
+%   pdflatex minutes.dtx
+%   pdflatex minutes.dtx
+%   makeindex -s gglo -o minutes.gls minutes.glo
+%   makeindex -s gind -o minutes.ind minutes.idx
+%   pdflatex minutes.dtx
+%   thumbpdf minutes
+%   pdflatex minutes.dtx
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\preamble
+----------------------------------------------------------------------
+The original file is loadable from CTAN on:
+macros/latex/contrib/supported/minutes
+
+Name of contribution: minutes
+Name and email:       Knut Lickert <knut@lickert.net>
+Location on CTAN:     tex-archive/macros/latex/contrib/supported/minutes
+Summary description:  Package for writing (collection of) minutes
+German Information:   Paket zum Erstellen von Protokollen
+                        to take minutes = Protokoll schreiben
+                        protocoll = diplomatische Protokoll
+License type:         Free
+
+Announcement text:
+----------------------------------------------------------------------
+minutes.sty provides the creation of a collection of minutes.
+Special features:
+- Support of tasks (who, schedule, what, date of finishing),
+    possibility of creating a list of open tasks
+    inclusion of open tasks from other minutes ('open last year tasks')
+    (also possible as task.sty)
+- Support of attachments
+- Support of schedule dates (support of calendar.sty)
+- Different versions (`secret parts')
+- Macros for votes and decisions (list of decisions)
+
+The minutes package contains:
+- minutes.dtx
+- minutes.ins
+- blindtext.dtx
+- blindtext.ins
+- protokol.tex  German description
+- Overview.tex  Include for minutes.dtx and protokol.tex
+                Also stand-alone document 
+- Tagesordnung.tex
+                A template for a "Mitgliederversammlung"
+
+After running minutes.ins this package include:
+- minutes.sty   The style itself
+- minutes.cfg   A configuration file
+- Sample.tex    A file, including an english and german minute
+- SampleEN.tex  An english minutes (loaded by Sample.tex)
+- SampleDE.tex  A german minutes (loaded by Sample.tex)
+- MinStyGd.tex  A file to check the behaviour with other classes...
+
+Additional package included:
+blindtext.sty:
+    Style to create text (commands blindtext and Blindtext)
+    Can be used to create examples with a lot text to become a feeling
+    for the look of classes, packages...
+    See MinStyGd.tex
+----------------------------------------------------------------------
+\endpreamble
+
+\generateFile{minutes.sty}{f}{\from{minutes.dtx}{package}}
+\generateFile{blindtext.sty}{f}{\from{blindtext.dtx}{package}}
+\nopreamble
+%\generateFile{minutes.cfg}{t}{\from{minutes.dtx}{config}}
+\generateFile{Sample.tex}{f}{\from{minutes.dtx}{sample}}
+\generateFile{SampleEN.tex}{f}{\from{minutes.dtx}{sampleEN}}
+\generateFile{SampleDE.tex}{f}{\from{minutes.dtx}{sampleDE}}
+\generateFile{MinStyGd.tex}{f}{\from{minutes.dtx}{styleguide}}
+
+\Msg{***************************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to copy the files }
+\Msg{*}
+\Msg{*\space\space *.sty, *.cfg into a directory searched by TeX}
+\Msg{*}
+\Msg{* Adapt the *.cfg-File to your need}
+\Msg{*}
+\Msg{* in Sample.tex you will find an example}
+\Msg{*  SampleEN.tex contains an example for an english minutes}
+\Msg{*  SampleGE.tex enth"alt ein Beispiel eines deutschen Protokolls}
+\Msg{*}
+\Msg{***************************************************************}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\endinput