update curve from CTAN

git-svn-id: svn://tug.org/texlive/trunk@5621 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 109 insertions, 88 deletions

diff --git a/Master/texmf-dist/source/latex/curve/curve.dtx b/Master/texmf-dist/source/latex/curve/curve.dtx
index c6a849cca3d..99585445cb4 100644
--- a/Master/texmf-dist/source/latex/curve/curve.dtx
+++ b/Master/texmf-dist/source/latex/curve/curve.dtx
@@ -50,7 +50,7 @@
 % \fi
 %
 % \catcode`\¡=14
-% \CheckSum{1115}
+% ^^A\CheckSum{1099}
 %% \CharacterTable
 %%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
 %%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
@@ -67,8 +67,8 @@
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
 %
-% \newcommand\version{1.13}
-% \newcommand\releasedate{2007/07/18}
+% \newcommand\version{1.14}
+% \newcommand\releasedate{2007/11/27}
 % \newcommand\packagecopyright{Copyright \copyright{} 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Didier Verna}
 % \newcommand\auctex{AUC-\TeX}
 % \newcommand\cv{\textsc{CV}}
@@ -121,13 +121,13 @@
 %
 % \begin{enumerate}
 % \item
-%   \textbf{Is there a way to align entries across several (all) rubrics ?}\\
+%   \textbf{Is there a way to align entries across several (all) rubrics?}\\
 %   Not automatically because rubrics are typeset as individual tables. There
 %   are many ways to manually ``trick'' too narrow keys in order to enlarge
 %   them however. As of version 1.11, \curve{} provides a new convenience
 %   macro to do something similar: see section \ref{sec:noentry}.
 % \item
-%   \textbf{How can I change the interline spacing ?}\\
+%   \textbf{How can I change the interline spacing?}\\
 %   Internally, \curve{} uses \LaTeX{} tabular-based environments. As such,
 %   you can play with |\arraystretch| to modify the space between rows.
 % \item
@@ -141,7 +141,7 @@
 %   into different ones, starting at the appropriate entries to avoid page
 %   breaking in the middle.
 % \item
-%   \textbf{How can I make multi-line subrubrics ?}\\
+%   \textbf{How can I make multi-line subrubrics?}\\
 %   Here are two ideas:
 %   \begin{itemize}
 %   \item Put your text in several consecutive subrubrics (one per line).
@@ -152,7 +152,7 @@
 %     your parbox, but this will work.
 %   \end{itemize}
 % \item
-%   \textbf{How can I make multi-line keys ?}\\
+%   \textbf{How can I make multi-line keys?}\\
 %   The trick is to temporarily change the key cell type to a paragraph one
 %   (remember that we're in a tabular environment).
 %   \begin{enumerate}
@@ -168,11 +168,11 @@
 % \end{verbatim}
 %   \end{enumerate}
 % \item
-%   \textbf{How to deal with long keys ?}\\
+%   \textbf{How to deal with long keys?}\\
 %   The best thing to do is to make them multi-line manually. Please refer to
 %   the previous question.
 % \item
-%   \textbf{Can I change the prefix locally ?}\\
+%   \textbf{Can I change the prefix locally?}\\
 %   Yes and no. The |\prefix| command can only be used in the preamble or
 %   between rubrics. Otherwise, there is currently no way to change the prefix
 %   for a single entry. This limitation will disappear in a future release.
@@ -480,7 +480,60 @@
 % subrubrics. This is a \LaTeX{} length that defaults to \texttt{5pt}.
 % |\subrubricbeforespace| controls the amount of extra vertical space to put
 % \textit{before} a subrubric when there are entries above. This is a \LaTeX{}
-% length that defaults to \texttt{10pt}.
+% length that defaults to \texttt{20pt}.
+%
+% \subsection{Bibliography\label{sec:biblio}}
+% Most scientists include their own list of publications in their \cv, so
+% \curve{} has support for different forms of bibliography.
+% \subsubsection{Manual bibliography}
+% The first thing you can do is create your own bibliography manually (I mean,
+% just like an ordinary rubric), and although this may appear boring, I
+% actually encourage people to do so for at least three reasons (only my
+% opinion of course):
+% \begin{itemize}
+% \item A \cv{} should be strictly formatted and coherent in layout.
+% Bibliography is no exception to this rule. In other words, it is prettier to
+% have your publications formatted like the rest of your \cv.
+% \item Automatic bibliography generation tools produce references, which is
+% silly in a \cv{} because you don't actually reference your papers anywhere
+% (or do you?). So better to sort them another way, like, by year of
+% publication as I do in my own \cv.
+% \item Manually adding, like, what? Half a dozen papers a year in your
+% \cv{} is not that much of a burden after all.
+% \end{itemize}
+% \subsubsection{The \texttt{bibliography} environment}
+% Some people however have expressed the wish of having standard bibliography
+% support in \curve. Version 1.2 provides that.
+% \DescribeEnv{thebibliography}
+% \DescribeMacro{\bibitem}
+% The standard |thebibliography| environment is now supported along with its
+% |\bibitem| companion. The behavior is actually that of a |rubric|
+% environment with its |\entry*| companion (with an empty prefix however).
+% This fact has two implications: firstly, the argument to the environment is
+% unused in \curve{} (but remains for compatibility with the rest of \LaTeX)
+% because \curve{} itself formats the keys and contents properly aligned.
+% Secondly, the bibliographic environment \textbf{must} reside in its own
+% file, as any other rubric. Don't forget that if you happen to write the
+% environment manually.\par
+% \DescribeEnv{revbib}
+% As of version 1.14, it is possible to count bibliographic items in a reverse
+% order, which comes in handy when you display your publications from the most
+% recent to the oldest one. The \texttt{revbib} option triggers this behavior.
+% Note that this also works when you use \BibTeX{} (see below).
+% \subsubsection{\BibTeX}
+% \DescribeMacro{\nocite}
+% \DescribeMacro{\bibliographystyle}
+% \DescribeMacro{\bibliography}
+% If you want to use \BibTeX, that's also possible of course. Do it as you
+% would do in a random paper. You will probably issue a |\nocite{*}| command
+% followed by a call to |\bibliography|. In \curve, this uses the |bbl| file
+% as a rubric one.\par
+% \subsubsection{Compatibility concerns}
+% As of version 1.9, \curve{} is compatible with the |bibentry| package. Note
+% however that there is an incompatibility between |bibentry| and |hyperref|,
+% and a workaround described in the |hyperref| README file.
+%
+% As of version 1.12, \curve{} is compatible with the |multibbl| package.
 %
 % \subsection{Standard Class Features}
 %
@@ -497,7 +550,7 @@
 % page format you want. By default, \texttt{letterpaper} is used. The
 % \texttt{landscape} options switches the horizontal and vertical settings.
 % I'm not sure why I propose this option. Nobody wants to write a \cv{} in
-% landscape mode, right ?\par
+% landscape mode, right?\par
 %
 % \DescribeEnv{oneside}
 % \DescribeEnv{twoside}
@@ -532,58 +585,14 @@
 % (the equivalent of chapters and sections in books for instance).
 % By default, the page style is \texttt{empty}.
 %
-% \subsubsection{Bibliography\label{sec:biblio}}
-% Most scientists include their own list of publications in their \cv. The
-% first thing you can do is create your own bibliography manually, and
-% although this may appear boring, I actually encourage people to do so for at
-% least three reasons (only my opinion of course):
-% \begin{itemize}
-% \item A \cv{} should be strictly formatted and coherent in layout.
-% Bibliography is no exception to this rule. In other words, it is prettier to
-% have your publications formatted like the rest of your \cv.
-% \item Automatic bibliography generation tools produce references, which is
-% silly in a \cv{} because you don't actually reference your papers anywhere
-% (or do you ?). So better to sort them another way, like, by year of
-% publication as I do in my own \cv.
-% \item Manually adding, like, what ? Half a dozen papers a year in your
-% \cv{} is not that much of a burden after all.
-% \end{itemize}
-%
-% Some people however have expressed the wish of having standard bibliography
-% support in \curve. Version 1.2 provides that.
-% \DescribeEnv{thebibliography}
-% \DescribeMacro{\bibitem}
-% The standard |thebibliography| environment is now supported along with its
-% |\bibitem| companion. The behavior is actually that of a |rubric|
-% environment with its |\entry*| companion (with an empty prefix however).
-% This fact has two implications: firstly, the argument to the environment is
-% unused in \curve{} (but remains for compatibility with the rest of \LaTeX)
-% because \curve{} itself formats the keys and contents properly aligned.
-% Secondly, the bibliographic environment \textbf{must} reside in its own
-% file, as any other rubric. Don't forget that if you happen to write the
-% environment manually.\par
-% \DescribeMacro{\nocite}
-% \DescribeMacro{\bibliographystyle}
-% \DescribeMacro{\bibliography}
-% If you want to use \BibTeX, that's also possible of course. Do it as you
-% would do in a random paper. You will probably issue a |\nocite{*}| command
-% followed by a call to |\bibliography|. In \curve, this uses the |bbl| file
-% as a rubric one.\par
-%
-% As of version 1.9, \curve{} is compatible with the |bibentry| package. Note
-% however that there is an incompatibility between |bibentry| and |hyperref|,
-% and a workaround described in the |hyperref| README file.
-%
-% As of version 1.12, \curve{} is compatible with the |multibbl| package.
-%
 % \subsubsection{Internationalization}
-% \curve{} currently supports 11 languages via the following options:
+% \curve{} currently supports 12 languages via the following options:
 % \texttt{english}, \texttt{french} (or \texttt{francais}), \texttt{spanish},
 % \texttt{portuguese} (or \texttt{portuges}), \texttt{brazilian} (or
 % \texttt{brazil}), \texttt{italian}, \texttt{german}, \texttt{ngerman},
-% \texttt{dutch}, \texttt{danish} and \texttt{swedish}. The \texttt{german}
-% and \texttt{ngerman} options are currently equivalent; so are the
-% \texttt{portuguese} and \texttt{brazilian} ones.\par
+% \texttt{dutch}, \texttt{danish}, \texttt{swedish} and \texttt{polish}. The
+% \texttt{german} and \texttt{ngerman} options are currently equivalent; so
+% are the \texttt{portuguese} and \texttt{brazilian} ones.\par
 % If you want a finer grain on the language-dependent parts of \curve, the
 % following macros are provided.\par
 % \DescribeMacro{\continuedname}
@@ -665,7 +674,7 @@
 % To remedy this problem, I usually use the \texttt{ask} option and a
 % makefile to build the different flavors and move the output file to
 % flavor-specific name. Here is a typical makefile target that should clarify
-% (or maybe darken ?) what I am saying:
+% (or maybe darken?) what I am saying:
 % \begin{verbatim}
 %cv.$(FLAVOR).dvi: cv.ltx $(RUBRICS)
 %       echo $(FLAVOR) | latex cv.ltx
@@ -704,6 +713,10 @@
 %
 % \section{Changes}
 % \begin{itemize}
+% \item[v1.14] Support for reverse counting bibliographic entries, suggested
+%   by Joseph Wright\\
+%   Support for Polish thanks to Radek Dominiak\\
+%   |<radoslaw.dominiak@gmail.com>|
 % \item[v1.13] Support for title alignment, suggested by Lars Kasper\\
 %   Support for footnotes, suggested by Alain Coletta\\
 %   Let rubrics honor the current |\linewidth|\\
@@ -771,22 +784,14 @@
 % First, the class announcement and the initial requirements:
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e}
-\ProvidesClass{curve}[2007/07/18 v1.13
+\ProvidesClass{curve}[2007/11/27 v1.14
                       Curriculum Vitae class for LaTeX2e]
 
 \RequirePackage{ltxtable}
+\RequirePackage{ifthen}
 \RequirePackage{calc}
 
 %    \end{macrocode}
-% The following macro tests strings equality. It avoids the hassle of this
-% stupid \TeX{} scheme that prevents simple conditionals imbrication.
-%    \begin{macrocode}
-\newif\ifstrok\strokfalse
-\def\strtest#1#2{%
-  \def\@strone{#1}\def\@strtwo{#2}%
-  \ifstrok\else\ifx\@strone\@strtwo\stroktrue\fi\fi}
-
-%    \end{macrocode}
 %
 % \subsection{The Rubric File}
 % We don't want to output an extra |subrubricbeforespace| if no entry is
@@ -812,16 +817,15 @@
 %    \begin{macrocode}
 \newcolumntype{k}{>{\@keyfont}l}
 \newcommand\keyalignment[1]{%
-  \strokfalse\strtest{#1}{l}\strtest{#1}{r}\strtest{#1}{c}%
-  \ifstrok\else%
-    \ClassError{curve}{Invalid key alignment}{%
-      You have called \protect\keyalignment\space with an invalid value.%
-      \MessageBreak
-      Valid options include l, c, and r.\MessageBreak
-      Type X <return> to quit, fix the typo, and rerun LaTeX.}%
-  \fi
-  \newcolumntype{k}{>{\@keyfont}#1}
-}
+  \ifthenelse{\equal{#1}{l}}{}{%
+    \ifthenelse{\equal{#1}{r}}{}{%
+      \ifthenelse{\equal{#1}{c}}{}{%
+        \ClassError{curve}{Invalid key alignment}{%
+          You have called \protect\keyalignment\space with an invalid value.%
+          \MessageBreak
+          Valid options include l, c, and r.\MessageBreak
+          Type X <return> to quit, fix the typo, and rerun LaTeX.}}}}%
+  \newcolumntype{k}{>{\@keyfont}#1}}
 
 %    \end{macrocode}
 % \DescribeMacro{\prefix}
@@ -1092,9 +1096,11 @@
 
 \newcommand\photo[2][l]{%
   \RequirePackage{graphicx}
-  \strokfalse\strtest{#1}{l}\strtest{#1}{r}\strtest{#1}{c}%
-  \ifstrok\else\ClassError{curve}{Invalid argument to \protect\photo}{%
-    Argument 2 of \protect\photo must be `l', `r' or `c'.}\fi
+  \ifthenelse{\equal{#1}{l}}{}{%
+    \ifthenelse{\equal{#1}{r}}{}{%
+      \ifthenelse{\equal{#1}{c}}{}{%
+        \ClassError{curve}{Invalid argument to \protect\photo}{%
+          Argument 2 of \protect\photo must be `l', `r' or `c'.}}}}%
   \def\tmp@cmd{\global\let\makeheaders@}
   \expandafter\tmp@cmd\csname makeheaders@#1\endcsname
   \gdef\photo@file{#2}}
@@ -1158,9 +1164,11 @@
   \parbox[#1]{\rightheader@width}{\raggedleft\@rightheader}}
 
 \newcommand\makeheaders[1][c]{%
-  \strokfalse\strtest{#1}{t}\strtest{#1}{b}\strtest{#1}{c}%
-  \ifstrok\else\ClassError{curve}{Invalid argument to \protect\makeheaders}{%
-    Argument of \protect\makeheaders must be `t', `b' or `c'.}\fi
+  \ifthenelse{\equal{#1}{t}}{}{%
+    \ifthenelse{\equal{#1}{b}}{}{%
+      \ifthenelse{\equal{#1}{c}}{}{%
+        \ClassError{curve}{Invalid argument to \protect\makeheaders}{%
+          Argument of \protect\makeheaders must be `t', `b' or `c'.}}}}%
   \def\tmp@cmd{\global\let\includephoto@}
   \expandafter\tmp@cmd\csname includephoto@#1\endcsname
   \makeheaders@{#1}%
@@ -1264,6 +1272,10 @@
 %    \begin{macrocode}
 \let\newblock\par
 \newcounter{bibcount}
+\newcounter{bibtotal}
+
+\newif\ifcurve@revbib\curve@revbibfalse
+\DeclareOption{revbib}{\curve@revbibtrue}
 
 %    \end{macrocode}
 % \DescribeMacro{\bibliography}
@@ -1309,7 +1321,9 @@
 	\immediate\write\@auxout{\string\bibcite{#2}{#1}}}
       \fi%
       \ignorespaces}
-    \def\@bibitem#1{\stepcounter{bibcount}\@sentry[\@biblabel{\thebibcount}]%
+    \def\@bibitem#1{\stepcounter{bibcount}%
+      \@sentry[\@biblabel{\ifcurve@revbib\thebibtotal\else\thebibcount\fi}]%
+      \ifcurve@revbib\addtocounter{bibtotal}{-1}\fi%
       \if@filesw%
 	\immediate\write\@auxout{\string\bibcite{#1}{\thebibcount}}%
       \fi%
@@ -1323,6 +1337,11 @@
   }
 }
 
+\AtEndDocument{%
+  \if@filesw%
+    \immediate\write\@auxout{\string\setcounter{bibtotal}{\thebibcount}}%
+  \fi}
+
 %    \end{macrocode}
 % \DescribeMacro{\listpubname}
 %    \begin{macrocode}
@@ -1391,7 +1410,9 @@
 \DeclareOption{swedish}{%
  \continuedname{~(forts.)}
  \listpubname{Publikationer}}
-
+\DeclareOption{polish}{
+  \continuedname{~(kontynuacja)}
+  \listpubname{Publikacje}}
 
 %    \end{macrocode}
 % \subsection{Standard Class Processing}