diff options
author | Karl Berry <karl@freefriends.org> | 2013-05-22 23:59:16 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2013-05-22 23:59:16 +0000 |
commit | 44be3cb6c02aa51896d009214a1329c043f0f672 (patch) | |
tree | 68c0eefbd26e38d8197a906cccb52623e4252296 /Master/texmf-dist/source/latex/amsmath | |
parent | f2724d7a2a6e09427794ce270a32ac4172fbfdaa (diff) |
amsmath from original ams -- updated pdfs only (and inconsequential diffs-m.txt move)
git-svn-id: svn://tug.org/texlive/trunk@30645 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex/amsmath')
-rw-r--r-- | Master/texmf-dist/source/latex/amsmath/diffs-m.txt | 552 |
1 files changed, 552 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/amsmath/diffs-m.txt b/Master/texmf-dist/source/latex/amsmath/diffs-m.txt new file mode 100644 index 00000000000..0bfa0ff69d4 --- /dev/null +++ b/Master/texmf-dist/source/latex/amsmath/diffs-m.txt @@ -0,0 +1,552 @@ +diffs-m.txt [1999/12/15] American Mathematical Society + +This is a synopsis of the principal differences between various versions +of the amsmath package and its companion packages. + +A synopsis of changes in the "AMS-LaTeX" distribution is included at the +end of this file. See also diffs-c.txt in the amslatex/classes area. + +Those upgrading from version 1.2 to version 2.0 will probably be +interested in the question: + + After I upgrade will anything fail in my pre-existing documents? + +Certain of the bug fixes have the potential to affect the output of +existing documents in the following ways: + +---Vertical spacing for some displayed equations will change because +"abovedisplayshortskip" is now applied when possible. + +---Incorrect horizontal spacing for certain math constructs will change, +e.g., for \iint\nolimits or a subscript on a double-accented letter. + +---The default subscript placement in displayed formulas for \varinjlim, +\varprojlim, \varliminf, \varlimsup is now below rather than to the +side. To get the old behavior, add \nolimits---e.g., +\varliminf\nolimits_{...}. + +---Ellipsis dots in text (\ldots or \dots) will now behave the same as +in standard LaTeX; the surrounding space may therefore change. + +During regression testing we found some errors cropping up in documents +from incorrect usage that had not been caught with version 1.2. Although +these errors are relatively rare, documents containing such usage will +need to be corrected before they will run properly with version 2.0: + +---Use of two mutually exclusive display structures for the same +display. In this example the outer \[ \] are redundant: + + \[ + \begin{align*} + ... + \end{align*} + \] + +---Inadequate argument markup for math accents: + + \hat \mathcal{C} + +This should have been written with braces surrounding the argument of +the \hat command: \hat{\mathcal{C}}. + +For documents where error messages crop up after the upgrade, there are +various possible approaches, including: + +(a) Change instances of incorrect usage (if applicable). + +(b) Put a copy of amsmath.sty version 1.2 into the home directory of the +document. Then it should continue to work the same as before. + +(c) Use the snapshot package in combination with a shell script to +arrange that version 1.2 of amsmath is found instead of 2.0 when +processing the document. See ftp://ftp.ams.org/pub/tex/snapshot.*. This +approach requires a certain amount of technical knowledge. + +(d) Downgrade to version 1.2 again. + +======================================================================== +Changes in amsmath 2.0 [November 1999] + +---The AMS-LaTeX User's Guide (amsldoc.tex) has been turned into the + AMSmath User's Guide by moving the amsthm documentation into a + separate file (amsthdoc.tex) in the amslatex/classes area. + +---Restored normal use of "shortskip" spacing in single equations. + +[!! NOTE: This means that page breaks may change in existing documents.] + +---Restored normal use of available shrink around binary operators in + single equations. + +---Fixed poor subscript placement for double-accented letters. Math +accent handling was reworked in the process in such a way that the +capitalized forms of the math accent commands are no longer necessary. +\hat{\hat{X}} will do proper alignment of the second accent. \Hat et +cetera are retained for compabitility reasons. (Thanks to Javier Bezos +for donating some code from his accents package.) + +[!! NOTE: Improper math accent use will now produce wrong output.] + +Suppose that we have \boldH defined in the preamble as +\newcommand{\boldH}{\mathbf{H}}. Then the following examples illustrate +recommended usage. + + \hat{\mathbf{H}} OK + \hat{\boldH} OK + \hat\boldH Works OK, but deprecated by the LaTeX book + \hat\mathbf{H} Not OK! Output will be incorrect. + +Since the output will be wrong, amsmath gives an error message when the +last variant is detected. + +---The following kinds of mixed structures worked by happenstance with + amsmath 1.2, although they should have produced an error message. + With amsmath 2.0 they will produce an error or warning message. + + [!! NOTE: Potential error messages] + + % Outer \[ \] is redundant + + \[ + \begin{align*} + ... + \end{align*} + \] + + % Outer \begin{equation*} ... \end{equation*} is redundant + + \begin{equation*}\begin{alignat*}{2} + ... + \end{alignat*} + \end{equation*} + + % No printed material is allowed between \begin{equation} and + % \begin{split}: + + \begin{equation*}\left \{ + \begin{split} + ... + \end{split}\right . + \end{equation*} + +---diff12.tex is replaced by diffs-m.txt and diffs-c.txt, with the + latter moving to the amslatex/classes area. + +---Added an "?" option which gives some information about the available + documentation. + +---The amsmath definitions for matrix, pmatrix, and cases are + incompatible with the plain-TeX syntax for \pmatrix, \matrix, and + \cases, which are used occasionally by some authors in LaTeX + documents. In version 2.0 the error messages resulting from the + plain-TeX syntax have been made more intelligible. + +---If you need the boldsymbol facilities of the amsbsy package, use of + the "bm" (boldmath) package is recommended instead for new documents. + The amsbsy package is retained for compatibility with existing + documents. If you have a recent version of LaTeX (1998 or newer) you + already have the bm package; otherwise you may need to get it from + CTAN. (It is not an AMS package.) + +---\iint\nolimits: Fixed poor placement of subscript (also \iiint, +\idotsint, etc). + +---\varinjlim, \varprojlim, \varliminf, \varlimsup: Default to +\displaylimits instead of nolimits. + +---Fixed alignedat so that it doesn't take the first token of its + contents and try to interpret it as a number. + +---Leave text version of \dots and \ldots unchanged. + +---Changed \numberwithin so it no longer assumes previous definition of + \thesomething contained no prefixes. + +---\mathbf{\Gamma}: Leave cap Greek letters alone instead of converting + them from variable (fam 7) to fixed (fam 0). \mathbf{\gamma} still + fails---but that's a math font problem. + +---\mathindent is aliased to \@mathmargin so that when the fleqn option + is used, users can reset it as the LaTeX book advertises. + +---With the showkeys package: Corrected loss of marginal notes when +labels occurred inside an align environment. + +---Carried over some tweaks (\bmod, \right/leftarrowfill) from the 1996 + version of plain.tex. + +---Adjusted spacing of overarrow@ and underarrow@ to allow more room for + larger cmsy arrowheads. + +---Corrected spurious "overfull \hbox" warnings for \xrightarrow. + +---Corrected poor spacing for \xleftarrow. + +---Removed the \leavevmode in \smash which caused trouble for some + applications (e.g., the crop package) that expected the original + LaTeX definition. + +---Changed \def to \newcommand/\newenvironment where appropriate. + +---Use \sqrtsign instead of \@@sqrt (but include a backward + compatibility hack for the latter). + +---Left brace in \env{cases} environment would fail to work in + certain circumstances: Fix by using \lbrace instead of \{. + +---Use \ignorespacesafterend where applicable instead of + \global\@ignoretrue. + +---Protected commands in the definition of \theequation were + incorrectly expanded by the subequations environment when copying + the definition to \theparentequation: Fix by using \protected@edef. + +---Spurious extra space following punctuation at that end of a display: + In \math@cr, \math@cr@@, etc, use \iffalse{\fi instead of simply { to + keep an unwanted mathord atom from being added at the end of the + current math list; added \endmultline@math to work around a similar + sort of problem specific to the `multline' environment. + +---Various wrong results or no effect for \displaybreak inside "align", + "alignat", etc. Resetting \dspbrk@level in the \everycr of + \@display@init cleared most of these up. + +---Changed \displaybreak to issue an error message if enclosed in boxing + environment that will keep it from having any effect. + +---Turned off \displaybreak during the measuring phase of multline. + +---Fixed some numbering problems with multline and multline* and error + for use of \tag. + +---Use \@gtempa instead of \@tempa where assigned globally (standard + save stack precaution). + +---Save and restore \column@ to keep aligned from screwing up the column + counting of a parent align environment. Made \column@ assignments + uniformly global, except in a couple of places where the risk of side + effects seemed too great. + +---Error recovery for misspelled '\end{multline}' was not very helpful. + Improve \collect@body along lines suggested by Hellström. + +---Fixed up certain number placement problems with align + +---Add \alignsafe@testopt to work around a LaTeX bug: when a nested + alignment environment that takes an optional argument has an empty + first cell (i.e., begins with an &) LaTeX's optional argument + scanning screws up the alignment state. + +---Add `mathdisplay' environment (internal use) to correct several + problems of \[ \] and the `equation' environment arising from the + previous implementation as a degenerate case of `gather'. + +---It is possible now to use \eeq as an abbreviation for \end{equation} +(one of the consequences of the preceding change). But still not \eal +for \end{align} or certain other display structures. + +---Reorganize `split' internal calling sequence to go along with the use + of `mathdisplay' in \[ \] and `equation'. + +---Suppression of LaTeX error messages during measuring phase made + primitive TeX errors harder to understand; stop suppressing. (As a + result, users will sometimes get redundant error messages now.) + Remove obsolete Sb, Sp environments again. + +---The file amsintx.dtx was removed from the distribution pending + further development. + +---Remove the \ifinany@ switch, use \spread@equation instead to achieve + the same ends. + +---Remove unbracefonts@ function, no longer needed after changes in + math accent handling. + +---Got rid of the special trap for '^x that had been carried over from +AMS-TeX. + +---Made \overline, \doteq, \longrightarrow, etc, robust. + +---Changed \relbar to use \std@minus---otherwise \underleftrightarrow +works poorly in a \DeclareMathOperator definition. + +---Use \new@ifnextchar in matrix, pmatrix, cases so that \\<newline>[x] +doesn't trigger an error. + +---Bug fix for nested use of \label inside minipage inside equation. + +---Add minalignsep after every second column in aligned, for consistency +with align. + +======================================================================== +Changes in amsmath 1.2 [January 1995] + +---Name change; relation to the "amsfonts" package + +In version 1.1 of AMS-LaTeX, the name of this package was "amstex". The +new name is "amsmath". The amstex package automatically invoked the +amsfonts package as well; the amsmath package does not. + +---Adapted for LaTeX2e + +Old method of invocation: + + \documentstyle[amstex]{article}% LaTeX 2.09 + +New method of invocation: + + \documentclass{article} + \usepackage{amsmath} + +---Handling of options intlim, nosumlim, nonamelm, righttag, ctagsplt + +Old usage: + + \documentstyle[amstex,righttag,intlim] + +New usage: + + \usepackage[reqno,intlimits]{amsmath} + +Several option names were changed (mainly, they are no longer restricted +to eight characters): + + intlim -> intlimits + nosumlim -> nosumlimits + nonamelm -> nonamelimits + righttag -> reqno [for consistency with "leqno"] + ctagsplt -> centertags + +---Character @ is no longer used as a special command prefix + +Certain commands in the amstex pkg started with "@" instead of "\". This +special usage has been discontinued, except for the amscd package, and +then only within the CD environment. Practically speaking, this means +primarily that it is no longer necessary to use doubled @@ to get a +single printed @ character (e.g., in e-mail addresses). + +---The @, and @! micro-spacing commands are no longer provided + +As a consequence of the @ character change, "@," and "@!" are no longer +recognized spacing commands. An \mspace command is provided that can be +used instead; see the AMSmath User's Guide. + +---Extensible arrow commands @>>> and @<<< + +The commands @>>> and @<<< are no longer available [except in the CD +environment of the amscd package]; alternative commands \xleftarrow and +\xrightarrow are provided by the amsmath package. The sub and +superscripts are given through an optional resp. mandatory argument, for +example + + X\xleftarrow{b}Y % superscript "b" only + X\xrightarrow[\alpha]{\beta}Y % sub alpha, sup beta + +---The command \bold has been superseded by the command \mathbf, as the +latter is now the standard name provided by LaTeX for this purpose. + +---The commands \newsymbol, \frak, \Bbb are no longer available because +the amsfonts package is not loaded by amsmath. In any case those +commands now have new names---\frak -> \mathfrak, \Bbb -> \mathbb, etc. +See the amsfonts documentation for further details. + +---The amsmath package provides \lvert and \rvert to use for vert-bar +symbols when they act as delimiters (compare \langle, \rangle for +angle-bracket delimiters). Commands \lVert and \rVert are likewise +provided instead of \| for paired-delimiter use of the double-vert +symbol. Use of | and \| for paired delimiters can lead to incorrect +spacing in rare cases. Further discussion is found in the AMS-LaTeX +user's guide (amsldoc.tex). + +---The ~ command is now left unchanged by amsmath; the change +that makes it remove a redundant preceding or following space character +is now done only by AMS documentclasses (in version 1.1 this was done by +the amstex package). + +---The following rarely used commands are removed to the amsxtra +package: \accentedsymbol, \sphat, \spcheck, \sptilde, \spdot, \spddot, +\spdddot, \spbreve, \@))), \@(((. + +---The six generalized fraction commands \over, \overwithdelims, \atop, +\atopwithdelims, \above, \abovewithdelims are deprecated and produce +warning messages. Their functionality can be obtained through \frac, +\binom, and \genfrac instead. See amsldoc.tex and technote.tex for +further details. + +---The \fracwithdelims command is gone, as \genfrac provides +equivalent functionality (and a little more). + +---The optional argument of \frac that allowed changing the thickness of +the fraction line is gone. That functionality is now provided only +through \genfrac: the need to change the line thickness is so rare in +practice that it seems better not to burden the ubiquitous \frac command +with the somewhat time-consuming look-ahead process required for an +optional argument. I.e., this change will contribute in a small way to +making your documents run faster. + +---The commands \lcfrac and \rcfrac for left or right alignment of +continued fraction numerators are gone; they are replaced by an optional +argument of the \cfrac command. + +---A new command \DeclareMathOperator is provided for defining new +operator names: + +\DeclareMathOperator{\Tr}{Tr} +\DeclareMathOperator*{\xlim}{x-lim} + +The * form makes the operator name produce limit-style sub and +superscripts, like \max or \lim. This is now the preferred method, +instead of using the old command \operatorname (which is, however, +retained for now). The command \operatornamewithlimits has been renamed +\operatorname*. These commands now can also be obtained through a +separate package amsopn, so it's not necessary to load the entire +amsmath package just to get that feature. + +---Environments "Sb", "Sp" retired. + +The environments Sb and Sp for multiline subscripts have been replaced +by a single command \substack, used as follows: + +\sum_{\substack{first line\\second line}} + +This command can be used equally well in a subscript or superscript, and +provides better vertical positioning (as compared to Sb, Sp) if a +multiline subscript is placed on the side, as perhaps for an integral. +There is also a slightly generalized alternative, an environment +subarray that allows you to specify either centering or left alignment +for the contents: + +\sum_{\begin{subarray}{l}first line\\second line\end{subarray}} + +---New command \nobreakdash + +A command \nobreakdash is provided to suppress the possibility of a +linebreak after the following hyphen or dash. For example, if you write +"$p$\nobreakdash-adic" then a linebreak will never be taken between the +hyphen and the "adic". + +---The placement of equation numbers has been substantially improved for +align, gather, and split. Numbers will now never overlap on top of the +equation body (as far as we can ascertain), and they are much less +likely to be shifted up or down unnecessarily when there is actually +adequate space to leave the number in the normal place. In a few +remaining cases, an equation number will be shifted unnecessarily +because technical complications make accurate measurement of the +available room too difficult; for those cases a \raisetag command is +provided that allows you to manually adjust the vertical position of the +equation number. + +---The [xx]align[at] family of environments has been thoroughly revised: +now the xalignat environment is gone, as its function has been merged +into the align environment (it's no longer necessary to specify how many +side-by-side structures, as was required for xalignat, because align +automatically handles any number of them). Similarly, the xxalignat +environment has been replaced by an environment flalign that doesn't +require you to specify how many side-by-side structures will be needed. +Certain numbering problems (presence of an equation number when it +should be absent, or vice versa) have also been cleared up. + +(Thanks to David M. Jones for his substantial [volunteer] work behind +this change and the preceding one.) + +---The alignedat environment was changed to take two arguments rather +than one: a mandatory argument (as formerly) specifying the number of +align structures, and a new optional one specifying the placement of the +environment (parallel to the optional argument of aligned). However, +aligned is simpler to use, allowing any number of aligned structures +automatically, and therefore the use of alignedat is deprecated. + +---The seldom-used command \oldnos is gone; if you need it, you should +consult the LaTeX documentation on using fonts (e.g., fntguide.tex) to +find out how to construct an equivalent command. + +---A new subequations environment causes all numbered equation +environments within its scope to be numbered (4.9a) (4.9b) (4.9c) etc., +if the preceding numbered equation was 4.8. A \label command immediately +after \begin{subequations} will produce a \ref of the parent number +`4.9', not `4.9a'. The counters used by the subequations environment are +parentequation and equation and standard uses of \addtocounter, +\setcounter, etc., are possible with those counter names. + +---The amsmath package (unlike amstex) respects the setting provided by +the documentclass for putting equation numbers on the right or the left. +[Technical note: a documentclass that has leqno as the default should +explicitly pass that option to the amsmath package with +\PassOptionsToPackage in order for it to be effective.] + +---The fleqn option for left-aligned instead of centered equations is +now supported (thanks to David M. Jones). + +************************************************************************ +The remainder of this file discusses some changes that do not directly +pertain to the amsmath package but to the parent distribution known as +"AMS-LaTeX". + +======================================================================== +Changes in AMS-LaTeX 2.0 + +---The AMS-LaTeX User's Guide (amsldoc.tex) is split up into amsldoc.tex +and amsthdoc.tex, with the latter moving into the "classes" area. + +---The file amslatex.faq was split into amsmath.faq and amsclass.faq. + +---The file amslatex.bug was done away with; most of the information was +merged into diffs-m.txt, diffs-c.txt, amsmath.faq, and amsclass.faq. + +======================================================================== +Changes in AMS-LaTeX 1.2 + +---Adapted for LaTeX2e + +AMS-LaTeX 1.0 and 1.1 were designed to work with LaTeX 2.09, which +became obsolete in 1994 with the appearance of "LaTeX2e". AMS-LaTeX 1.2 +has been extensively adapted to take advantage of various features of +LaTeX2e. It is no longer a separate TeX format---i.e., it does not need +to be invoked by a separate "amslatex" command. + +---LaTeX 2.09 font commands (\bf, \it, etc) + +Pre-existing documents will for the most part continue to work fine +without requiring any changes. However, depending on the installation +options used for your copy of AMS-LaTeX 1.1 you may need to update the +options list of the \documentstyle command by adding newlfont, for +example: + + \documentstyle[newlfont]{amsart} + +---The packages amsfonts, amssymb were moved to the AMSFonts +distribution. They used to be included in the AMS-LaTeX distribution for +pragmatic reasons but their natural home is with the AMSFonts +distribution. + +---Package amstex renamed to amsmath + +The amstex package has been renamed amsmath. The old name `amstex' came +from the fact that version 1.0 was a more or less straight port into +LaTeX of selected portions from the macro package AmS-TeX written by +Michael Spivak, but the historical origins of the package are likely of +less interest to the general usership---especially looking to the +future---than a straightforward declaration in the name `amsmath' of the +sort of features that are provided. + +Another important reason for the name change was to make possible some +progress that would be out of the question (because of the impact on +existing documents) if the name `amstex' were retained. For example, +unlike amstex, amsmath doesn't automatically load the amsfonts package, +as that package was moved out to the AMSFonts distribution as described +above. If this change were not accompanied by a name change, many +existing documents would have to be updated by hand (adding +\usepackage{amsfonts}) in order to run without error. A frozen version +of amstex.sty is provided for processing pre-existing documents; it +won't have active maintainence henceforth except for bug fixes. For new +documents, authors should use the amsmath package. + +Therefore, "\usepackage{amstex}" is incorrect usage---do not rely on the +1994 edition of `The LaTeX Companion' in this respect (unless you obtain +the errata for Chapter 8; see +http://ctan.tug.org/info/compan-rev/ch8.pdf). + +---New documentclass amsproc + +A new documentclass amsproc was added for collections of articles, such as +the proceedings of a conference. |