dozenal (23jan15)

git-svn-id: svn://tug.org/texlive/trunk@36127 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 641 insertions, 16 deletions

diff --git a/Master/texmf-dist/source/fonts/dozenal/dozenal.dtx b/Master/texmf-dist/source/fonts/dozenal/dozenal.dtx
index 5be174d5ebe..4024348b6bb 100644
--- a/Master/texmf-dist/source/fonts/dozenal/dozenal.dtx
+++ b/Master/texmf-dist/source/fonts/dozenal/dozenal.dtx
@@ -19,28 +19,590 @@
 % The Current Maintainer of this work is Donald P. Goodman
 % (dgoodmaniii@gmail.com).
 % 
-% This work consists of the files dozenal.dtx, dozenal.sty,
-% dozchars6.mf, dozchars7.mf, dozchars8.mf, dozchars9.mf,
-% dozchars10.mf, dozchars12.mf, dozchars17.mf, dozchsl8.mf,
-% dozchsl9.mf, dozchsl10.mf, dozchsl12.mf, dozchb10.mf,
-% dozchbx5.mf, dozchbx6.mf, dozchbx7.mf, dozchbx8.mf, dozchbx9.mf, 
-% dozchbx10.mf, dozchbx12.mf, dozchit7.mf, dozchit8.mf, 
-% dozchit9.mf, dozchit10.mf, dozchit12.mf, dozchbxi10.mf, 
-% dozchbxsl10.mf, dozenal.mf, dozenalb.mf, dozenali.mf, 
-% testdozchars.tex, dozenal.sty, and dozenal.pdf, along with 
-% the README.
+% This work consists of the files listed in dozenalfilelist.txt.
 % \fi
 
-\documentclass{ltxdoc}
-\title{The \texttt{dozenal} Package, v3.3}
-\author{Donald P.\ Goodman III}
-\date{\today}
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{dozenal}[2015/01/01 v5.1 support for dozenal fonts]
+%<*driver>
 
+\documentclass{ltxdoc}
 \usepackage{doc}
-\usepackage{dozenal}
+\usepackage{url}
+\usepackage[typeone]{dozenal}
 \usepackage{mflogo}
 \usepackage{makeidx}
+\makeindex
 
 \begin{document}
-\DocInput{dozenal.sty}
+\DocInput{dozenal.dtx}
 \end{document}
+%</driver>
+% \fi
+% \title{The \texttt{dozenal} Package, v5.1}
+% \author{Donald P.\ Goodman III}
+% \date{\today}
+%
+% \maketitle
+% \begin{abstract}\noindent
+% The |dozenal| package provides some simple mechanisms for
+% working with the dozenal (duodecimal or ``base 12'')
+% numerical system.  It redefines all basic \LaTeX\
+% counters, provides a command for converting arbitrary
+% decimal numbers into dozenal, and provides new, real
+% Metafont characters for ten and eleven, though the
+% commands for producing them can be redefined to produce
+% any figure.  As of v2.0, it also includes Type 1 versions
+% of the fonts, used automatically whenever T1 encoding is
+% selected for the document.  This package uses the |\basexii| 
+% algorithm by David Kastrup.
+% \end{abstract}
+% 
+% \tableofcontents
+% 
+% \section{Introduction}
+% \label{sect:intro}
+% 
+% While most would probably call it at best overoptimistic and
+% at worst foolish, some people (the author included) do still
+% find themselves attracted to the dozenal (base-twelve)
+% system.  These people, however, have been pretty hard
+% up\footnote{This is an Americanism for ``out of luck'' or
+% ``in difficult circumstances,'' for those who do not
+% know.} in the \LaTeX\ world.  There is no package file
+% available which produces dozenal counters, like page and
+% chapter numbers, nor were there \emph{any} (I made a
+% pretty diligent search) dozenal characters for ten and
+% eleven, leaving dozenalists forced to use such makeshift
+% ugliness as the ``X/E'' or ``T/E'' or ``*/\#'' or whatever
+% other standard they decided to use.  While this sort of
+% thing may be acceptable in ASCII, it's absolutely
+% unacceptable in a beautiful, typeset document.
+% 
+% Enter the |dozenal| package.  This package automates all
+% the messiness of being a dozenalist and using \LaTeX.  It
+% redefines all the counters (though you'll have to redefine
+% them yourself if you're using your own), provides an
+% algorithm (generously donated by the intrepid David
+% Kastrup) for converting arbitrary positive whole numbers
+% into dozenal (this is e\TeX, but all modern distributions
+% will compile that), and finally, it includes original
+% dozenal characters, specifically designed to blend in well
+% with Knuth's Computer Modern fonts, though they should do
+% fine with the more common body fonts, as well.
+% 
+% This document was typeset in accordance with the \LaTeX\
+% \textsc{docstrip} utility.
+%
+% \section{Usage}
+% \label{sect:usage}
+%
+% The |dozenal| package provides four new commands (though
+% I can only take credit for two of them).  The first, and
+% by far the most important given the purpose and content of
+% this package, is |\basexii|\DescribeMacro{\basexii}.  This
+% is a very simple command which takes the following
+% structure:
+% \begin{quote}
+% \cs{basexii}\marg{number}\marg{ten symbol}\marg{eleven symbol}
+% \end{quote}
+% What the above means is that the command is |\basexii| and
+% it takes three mandatory arguments:  first, the number to
+% be converted into dozenal; second, the symbol that should
+% be used for ten; and third, the symbol that should be used
+% for eleven.  This number should be positive and whole;
+% that is, it should be zero or higher, and it should not
+% contain a fractional part.  \TeX\ is a typesetting
+% program, after all; if you want a robust decimal to
+% dozenal converter, there are many options that any
+% dozenalists caring enough to use this package will already
+% know about.
+% 
+% This |\basexii| algorithm was produced by David Kastrup,
+% well known and admired in the \TeX\ world for his many
+% useful packages and other contributions.  He posted this
+% algorithm on comp.text.tex; it is included here with his 
+% kind and generous permission.
+%
+% That one would want to use the same ten and eleven symbols
+% throughout a document seems a reasonable assumption;
+% therefore, I have provided a simplified version of the
+% |\basexii| command, |\dozens|\DescribeMacro{\dozens}.
+% |\dozens| takes only a single argument, the number to be
+% converted; the ten and eleven symbols used are those
+% produced by the commands |\x| and |\e|, to which we'll get
+% in a moment.
+% 
+% |\x|\DescribeMacro{\x}\ and |\e|\DescribeMacro{\e}\ are the
+% commands used to quickly and easily access the symbols for
+% ten and eleven without having to use active characters
+% (the \TeX\ gurus will know what that means; if you don't
+% know, that's okay; you don't need to to use this package
+% effectively).  In any case, |\x| and |\e| default to using
+% the special dozenal characters that are part of this
+% package; they could be easily redefined if for some reason
+% you don't like the Pitman characters (which this package,
+% and the Dozenal Society of Great Britain, prefer), in the
+% following manner:
+% \begin{quote}
+% |\renewcommand\x{X}|
+% \end{quote}
+% Or whichever characters you like to use.  If you prefer
+% the Dozenal Society of America's proposed characters (a
+% stylized X and E), then this package will disappoint you.
+% May I suggest |$\chi$| ($\chi$) and |$\xi$| ($\xi$) as a
+% stopgap while you locate or produce real characters of
+% your own?  Sorry; I'm an American myself, but I much
+% prefer the Pitman characters for a variety of reasons
+% (feel free to email me if you care), and creating fonts in
+% \MF, even small and inconsequential ones like this, is too
+% much work for characters that I don't even like.
+% 
+% The |dozenal| package also redefines all the standard
+% \LaTeX\ counters, such as |section| and |enumii|.  If
+% you've defined your own counters, you'll need to define
+% them yourself; however, this is an easy matter: 
+% \begin{quote}
+% |\renewcommand\thecounter{\basexii{\arabic{counter}}{\x}{\e}}|
+% \end{quote}
+% For example.  Of course, you can fill in the |\x| and |\e|
+% with whatever you want (though it would make more sense to
+% simply redefine |\x| and |\e|, so that all the counters
+% would use the same characters), or you could use the
+% |\dozens| command instead.  Whatever your pleasure might
+% be.
+%
+% The |nocounters|\DescribeMacro{nocounters}\ option to the
+% package prevents the redefinition of these counters.  The
+% effect of this is that the commands of the package
+% (|\basexii|, |\dozens|, etc.) are made available, but
+% all the counters will still be in decimal.  This permits
+% using dozenal characters in an otherwise decimal document;
+% it also proves useful in dozenal document in which these
+% counters are undefined (e.g., |minimal|).
+%
+% The |typeone|\DescribeMacro{typeone}\ option forces
+% |dozenal| to provide Postscript Type 1 fonts rather than
+% \MF\ bitmaps to \TeX.  Both of these are produced from the
+% same font files, though, so the difference is very slight.
+%
+% Finally, as of v5.0, we can convert numbers back to
+% decimal from dozenal, if we wish.  We do this with the
+% \DescribeMacro{\basex}|\basex| macro, which takes a single
+% argument, which is the dozenal number you wish to convert
+% to decimal.  This is subject to some pretty harsh
+% restrictions, however.  First, the only tokens allowed in
+% the number are 0--9, |\x|, and |\e|.  Second, these will
+% only work with \emph{unexpanded} |\x| and |\e|.  If you
+% don't know what this means, then good for you; \TeX\
+% programmers will sympathize.
+%
+% To illustrate these limitations, let's define a new
+% counter and dozenize it.  Here, we define the counter and
+% give it a nice value which will ensure that its dozenal
+% value will have an |\e| in it:
+%
+% \newcounter{testcount}\setcounter{testcount}{47}
+% \begin{quotation}
+% |\newcounter{testcount}\setcounter{testcount}{47}|
+% \end{quotation}
+%
+% In dozenal, of course, ``47'' is ``3\e.''  Now, let's
+% redefine that counter so that its results will be dozenal:
+%
+% \renewcommand\thetestcount{\basexii{\value{testcount}}{\x}{\e}}
+% \begin{quotation}
+% |\renewcommand\thetestcount{\basexii{\value{testcount}}{\x}{\e}}|
+% \end{quotation}
+%
+% Now we get to do lovely things like the following:
+%
+% \begin{quotation}
+% |\thetestcount| = \thetestcount
+% \end{quotation}
+%
+% Now we can try to get that number in decimal with
+% |\basex|.  But don't try it; |\basex{\thetestcount}|
+% doesn't work because the |\x| and |\e| are already
+% expanded.  Instead, use \LaTeX's built-in functions for
+% chores like this:
+%
+% \begin{quotation}
+% |\arabic{testcount}| = \arabic{testcount}
+% \end{quotation}
+%
+% On the other hand, if you have an actual string you want
+% converted, you can send it directly to |\basex| without
+% worrying about expansion, because through much trial and
+% error and banging head against wall, the expansion issues
+% have already been resolved:
+%
+% \begin{quotation}
+% |\basex{3\e}| = \basex{3\e}
+% \end{quotation}
+%
+% So |\basex| is of limited utility, but it's a nice tool to
+% add to the box.
+%
+% \section{The Fonts}
+% \label{sect:fonts}
+%
+% The fonts provided by the dozenal package are essentially
+% complete fonts which contain only the Pitman dozenal
+% characters; these are \x\ for ten and \e\ for eleven.
+% These characters are designed to blend well with the
+% Computer Modern fonts; they work passable well with
+% Times-type fonts and with kpfonts, and possibly with
+% others.
+%
+% The characters also come in all the appropriate shapes and
+% sizes; a few examples follow.
+%
+% \begin{center}
+% \begin{tabular}{lccc}
+% {} & Roman & \textit{Italic} & \textbf{Boldface} \\
+% \footnotesize Footnotesize & \footnotesize\x\ \e & \footnotesize\itshape
+% 	\x\ \e & \footnotesize\bfseries \x \e \\
+% \normalsize Normalsize & \normalsize\x\ \e & \normalsize\itshape
+% 	\x\ \e & \normalsize\bfseries \x \e \\
+% \LARGE LARGE & \LARGE\x\ \e & \LARGE\itshape
+% 	\x\ \e & \LARGE\bfseries \x \e \\
+% \Huge Huge & \Huge\x\ \e & \Huge\itshape
+% 	\x\ \e & \Huge\bfseries \x \e \\
+% \end{tabular}
+% \end{center}
+% 
+% They will work in paragraph or math mode without
+% distinction.
+% 
+% As of v4.0, |dozenal| also includes fonts for tally marks
+% specifically designed for use in the dozenal base.  In many
+% European countries tallies are kept in a very similar way;
+% this font demonstrates a way that such tally marks can be
+% made consistent as well as dozenal.
+% 
+% \begin{center}
+% \begin{tabular}{cccccc}
+% 1 & 2 & 3 & 4 & 5 & 6 \\
+% \Huge\tally{2}{\usefont{T1}{dozch}{m}{n}\selectfont 1} & \Huge\tally{2} & \Huge\tally{3} & \Huge\tally{4} & \Huge\tally{5} & \Huge\tally{6} \\
+% \end{tabular}
+% \end{center}
+%
+% These are accessed by the \DescribeMacro{\tally}|\tally|
+% command, which takes one argument:  the number, 1--6,
+% which you want to put in tallies.  Entering ``X'' or ``E''
+% will yield ``\x'' or ``\e'' respectively.  Other
+% characters will produce nothing.  Any character produced
+% by |\tally| is a \MF\ bitmap, not an outline, even if your
+% document is otherwise producing outlines.
+%
+% The fonts are called |dozch|, if for some reason direct
+% access to them is needed.  The Type 1 versions are
+% prefixed |fdz|; e.g., |fdzr8a|.
+% 
+% \section{Implementation}
+% \label{sect:code}
+% 
+% First, we name the package that we provide.  This is
+% not exactly the most difficult part of the code.
+%    \begin{macrocode}
+\ProvidesPackage{dozenal}[2012/05/13 v4.0 support for dozenal fonts]
+%    \end{macrocode}
+% Now we need to make sure that we have fixltx2e loaded, so
+% that the |\TextorMath| magic will work.
+%    \begin{macrocode}
+\RequirePackage{fixltx2e}
+%    \end{macrocode}
+% Now we ensure that |ifpdf| is loaded, so that we can test
+% for pdf or dvi modes.
+%    \begin{macrocode}
+\RequirePackage{ifpdf}
+%    \end{macrocode}
+% Now we declare the option ``nocounters'', which prevents
+% |dozenal| from redefining all the counters.  This prevents
+% errors in document classes which don't have these counters,
+% such as |minimal|.  Defines the command |\nocounters| if
+% and only if the options is named.
+%    \begin{macrocode}
+\DeclareOption{nocounters}{%
+	\def\nocounters{}%
+}%
+\newif\iftypeone\typeonefalse
+\DeclareOption{typeone}{\typeonetrue}
+\ProcessOptions\relax
+%    \end{macrocode}
+% We then define the font that we're using for our
+% \MF-produced Pitman characters.  Incidentally, we also
+% define the command |\doz|, though I can't foresee any
+% decent use for it except in packages and preambles; it is
+% then used to define |\x| and |\e|, which provide the ten
+% and eleven symbols for all the counter redefinitions.
+% This includes definitions for both T1 and OT1 encodings,
+% so it will work with either.
+%    \begin{macrocode}
+\DeclareFontFamily{OT1}{dozch}{}
+\DeclareFontShape{OT1}{dozch}{m}{n}{<-6> dozchars6 
+	<7> dozchars7 <8> dozchars8 <9> dozchars9 <10-11> 
+	dozchars10 <12-16> dozchars12 <17-> dozchars17  }{}
+\DeclareFontShape{OT1}{dozch}{b}{n}{<-> dozchb10 }{}
+\DeclareFontShape{OT1}{dozch}{bx}{n}{<-6> dozchbx6 
+	<7> dozchbx7 <8> dozchbx8 <9> dozchbx9 <10-11> 
+	dozchbx10 <12-> dozchbx12 }{}
+\DeclareFontShape{OT1}{dozch}{m}{sl}{<-8> dozchsl8 
+	<9> dozchsl9 <10-11> dozchsl10 <12-> dozchsl12 }{}
+\DeclareFontShape{OT1}{dozch}{bx}{sl}{<-> dozchbxsl10 }{}
+\DeclareFontShape{OT1}{dozch}{m}{it}{<-7> dozchit7 
+	<8> dozchit8 <9> dozchit9 <10-11> dozchit10 
+	<12-> dozchit12 }{}
+\DeclareFontShape{OT1}{dozch}{bx}{it}{<-> dozchbxi10 }{}
+\ifpdf
+	\pdfmapfile{=fdz.map}
+\fi
+\DeclareFontFamily{T1}{dozch}{}
+\DeclareFontShape{T1}{dozch}{m}{n}{<-> fdzr8r  }{}
+\DeclareFontShape{T1}{dozch}{bx}{n}{<-> fdzb8r }{}
+\DeclareFontShape{T1}{dozch}{m}{sl}{<-> fdzs8r }{}
+\DeclareFontShape{T1}{dozch}{bx}{sl}{<-> fdzbo8r }{}
+\DeclareFontShape{T1}{dozch}{m}{it}{<-> fdzso8r }{}
+\DeclareFontShape{T1}{dozch}{bx}{it}{<-> fdzbi8r }{}
+%\newcommand\doz[1]{{\fontfamily{dozch}\selectfont #1}}
+\iftypeone%
+	\def\doz#1{{\fontfamily{dozch}\fontencoding{T1}\selectfont #1}}%
+\else%
+	\def\doz#1{{\fontfamily{dozch}\fontencoding{OT1}\selectfont #1}}%
+\fi%
+\newcommand\x{\TextOrMath{\protect\doz{{X}}}{\X}}%
+\newcommand\e{\TextOrMath{\protect\doz{{E}}}{\E}}%
+\DeclareSymbolFont{dozens}{OT1}{dozch}{m}{n}
+\DeclareMathSymbol{\X}{\mathord}{dozens}{88}
+\DeclareMathSymbol{\E}{\mathord}{dozens}{69}
+%    \end{macrocode}
+% Put in some additional code for the tally marks.
+%    \begin{macrocode}
+\newcommand\tally[1]{%
+	\usefont{OT1}{dozch}{m}{n}\selectfont{#1}%
+}%
+%    \end{macrocode}
+% Then we define our command which will produce the dozenal
+% numbers from decimal sources.  This algorithm was taken
+% directly from the publicly available archives of
+% comp.text.tex, where it was posted by the well-known and
+% redoubtable David Kastrup.  We also define the |\dozens|
+% command, a simplified |\basexii| (which, in fact, depends
+% utterly upon |\basexii|), just to make it easy for
+% everyone.
+%    \begin{macrocode}
+\def\basexii#1#2#3{\ifcase\numexpr(#1)\relax
+0\or1\or2\or3\or4\or5\or6\or7\or8\or9\or#2\or#3\else
+\expandafter\basexii\expandafter{\number\numexpr((#1)-6)/12}{#2}{#3}\expandafter\basexii\expandafter{\number\numexpr(#1)-((#1)-6)/12*12}{#2}{#3}\fi}
+\newcommand\dozens[1]{\basexii{#1}{\x}{\e}}
+%    \end{macrocode}
+% Now that we can convert numbers \emph{to} dozenal, let's
+% set it up so that we can convert them \emph{from} dozenal.
+% This is pretty ugly stuff here, because it's mostly
+% straight \TeX\ (and e-\TeX) without higher-level
+% conveniences, and because it's an expansion nightmare.  If
+% we didn't have to account for |\x| and |\e| because
+% included in such strings, it's fairly easy; but it took a
+% great deal of troubleshooting to make it work with them.
+%
+% First, we work up some macros to help us count the
+% characters in an argument (the same, more or less, as is
+% used in the |basicarith| package, adapted from those by
+% ``Florent'' at \url{tex-and-stuff.blogspot.com}); then, we convert to
+% decimal with |\basex|.
+%    \begin{macrocode}
+\newcount\b@charcount
+\def\gobblechar{\let\char= }
+\def\assignthencheck{\afterassignment\checknil\gobblechar}
+\def\countunlessnil{%
+	\ifx\char\nil \let\next=\relax%
+	\else%
+		\let\next=\auxcountchar%
+		\advance\b@charcount by1%
+	\fi%
+	\ifx\char\backslash\advance\b@charcount by-1\fi%
+	\next%
+}%
+\def\auxcountchar{%
+	\afterassignment\countunlessnil\gobblechar%
+}%
+\def\countchar#1{\def\xx{#1}\b@charcount=0\expandafter\auxcountchar\xx\nil}
+%end Florent code
+\def\gobble#1{}%
+\newcount\@numdigs%
+\newcount\@decmult%
+\newcount\@loopindex\@loopindex=1%
+\newcount\@decnum\@decnum=0%
+\newcount\@digit\@digit=1%
+\def\basex#1{%
+	\countchar{#1}\@numdigs=\b@charcount%
+	\@decmult=1\@loopindex=1%
+	\loop\ifnum\@loopindex<\@numdigs%
+		\multiply\@decmult by12%
+		\advance\@loopindex by1%
+	\repeat%
+	\@loopindex=0%
+	\def\isten{x}\def\iselv{e}\def\isquote{\backslash}%
+	\edef\@doznum{\detokenize{#1}\relax}%
+	\@decnum=0%
+	\loop\ifnum\@loopindex<\@numdigs%
+		\def\@firstchar{\expandafter\@car\@doznum\@nil}%
+		\if\@firstchar\@backslashchar
+			\edef\@doznum{\@removefirstdig{\@doznum}}%
+		\else
+			\if\@firstchar\isten\def\@firstchar{10}\fi
+			\if\@firstchar\iselv\def\@firstchar{11}\fi
+			\advance\@loopindex by1%
+			\@digit=\@firstchar%
+			\edef\@doznum{\@removefirstdig{\@doznum}}%
+			\multiply\@digit by\@decmult%
+			\advance\@decnum by\@digit%
+			\divide\@decmult by12%
+		\fi
+	\repeat
+	\the\@decnum%
+}
+\def\@removefirstdig#1{%
+	\expandafter\expandafter\expandafter\gobble\expandafter\string#1%
+}
+%    \end{macrocode}
+% Now, of course, we simply redefine all the counters.  This
+% covers only those counters included in the basic \LaTeX\
+% document classes, however, so if you've written your own,
+% you'll need to redefine them yourself.
+%
+% This first bit ensures that the counters are redefined
+% even if the command |\mainmatter| is not defined.  We have
+% to do this outside of the |\g@addto@macro| below;
+% otherwise, in documents where |\mainmatter| is defined but
+% not used, the counters will not be redefined.  This way,
+% they're redefined in all cases.
+% 
+% This also takes care of ensuring that the counters are
+% only redefined if the ``nocounters'' options was
+% \emph{not} specified.
+%    \begin{macrocode}
+\@ifundefined{nocounters}{%
+	\@ifundefined{c@page}{}{%
+		\renewcommand\thepage{\basexii{\value{page}}{\x}{\e}}}
+	\@ifundefined{c@footnote}{}{%
+		\renewcommand\thefootnote{%
+			\basexii{\value{footnote}}{\x}{\e}}}
+	\@ifundefined{c@part}{}{%
+		\renewcommand\thepart{%
+			\basexii{\value{part}}{\x}{\e}}}
+	\@ifundefined{c@subparagraph}{}{%
+		\renewcommand\thesubparagraph{%
+		\basexii{\value{subparagraph}}{\x}{\e}}}
+	\@ifundefined{c@paragraph}{}{%
+		\renewcommand\theparagraph{%
+			\basexii{\value{paragraph}}{\x}{\e}}}
+	\@ifundefined{c@equation}{}{%
+		\renewcommand\theequation{%
+			\basexii{\value{equation}}{\x}{\e}}}
+	\@ifundefined{c@figure}{}{%
+		\renewcommand\thefigure{%
+			\basexii{\value{figure}}{\x}{\e}}}
+	\@ifundefined{c@table}{}{%
+		\renewcommand\thetable{%
+			\basexii{\value{table}}{\x}{\e}}}
+	\@ifundefined{c@table}{}{%
+		\renewcommand\thempfootnote{%
+			\basexii{\value{mpfootnote}}{\x}{\e}}}
+	\@ifundefined{c@enumi}{}{%
+		\renewcommand\theenumi{%
+			\basexii{\value{enumi}}{\x}{\e}}}
+	\@ifundefined{c@enumii}{}{%
+		\renewcommand\theenumii{%
+			\basexii{\value{enumii}}{\x}{\e}}}
+	\@ifundefined{c@enumiii}{}{%
+		\renewcommand\theenumiii{%
+			\basexii{\value{enumiii}}{\x}{\e}}}
+	\@ifundefined{c@enumiv}{}{%
+		\renewcommand\theenumiv{%
+			\basexii{\value{enumiv}}{\x}{\e}}}
+	\@ifundefined{c@chapter}{%
+		\renewcommand\thesection{%
+			\basexii{\value{section}}{\x}{\e}}
+		\renewcommand\thesubsection{%
+			\thesection.\basexii{\value{subsection}}{\x}{\e}}
+		\renewcommand\thesubsubsection{%
+			\thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
+	}{
+		\renewcommand\thechapter{%
+			\basexii{\value{chapter}}{\x}{\e}}
+		\renewcommand\thesection{%
+			\thechapter.\basexii{\value{section}}{\x}{\e}}
+		\renewcommand\thesubsection{%
+			\thesection.\basexii{\value{subsection}}{\x}{\e}}
+		\renewcommand\thesubsubsection{%
+			\thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
+	}
+%    \end{macrocode}
+% Finally, if the |\mainmatter| command is used, we need to
+% make sure that it doesn't mess up our numbering scheme.
+%    \begin{macrocode}
+\@ifundefined{mainmatter}{}{%
+	\g@addto@macro\mainmatter{%
+		\@ifundefined{c@page}{}{%
+			\renewcommand\thepage{\basexii{\value{page}}{\x}{\e}}}
+		\@ifundefined{c@footnote}{}{%
+			\renewcommand\thefootnote{\basexii{\value{footnote}}{\x}{\e}}}
+		\@ifundefined{c@part}{}{%
+			\renewcommand\thepart{\basexii{\value{part}}{\x}{\e}}}
+		\@ifundefined{c@subparagraph}{}{%
+			\renewcommand\thesubparagraph{%
+				\basexii{\value{subparagraph}}{\x}{\e}}}
+		\@ifundefined{c@paragraph}{}{%
+			\renewcommand\theparagraph{%
+				\basexii{\value{paragraph}}{\x}{\e}}}
+		\@ifundefined{c@equation}{}{%
+			\renewcommand\theequation{%
+				\basexii{\value{equation}}{\x}{\e}}}
+		\@ifundefined{c@figure}{}{%
+			\renewcommand\thefigure{%
+				\basexii{\value{figure}}{\x}{\e}}}
+		\@ifundefined{c@table}{}{%
+			\renewcommand\thetable{%
+				\basexii{\value{table}}{\x}{\e}}}
+		\@ifundefined{c@table}{}{%
+			\renewcommand\thempfootnote{%
+				\basexii{\value{mpfootnote}}{\x}{\e}}}
+		\@ifundefined{c@enumi}{}{%
+			\renewcommand\theenumi{%
+				\basexii{\value{enumi}}{\x}{\e}}}
+		\@ifundefined{c@enumii}{}{%
+			\renewcommand\theenumii{%
+				\basexii{\value{enumii}}{\x}{\e}}}
+		\@ifundefined{c@enumiii}{}{%
+			\renewcommand\theenumiii{%
+				\basexii{\value{enumiii}}{\x}{\e}}}
+		\@ifundefined{c@enumiv}{}{%
+			\renewcommand\theenumiv{%
+				\basexii{\value{enumiv}}{\x}{\e}}}
+		\@ifundefined{c@chapter}{
+			\renewcommand\thesection{%
+				\basexii{\value{section}}{\x}{\e}}
+			\renewcommand\thesubsection{%
+				\thesection.\basexii{\value{subsection}}{\x}{\e}}
+			\renewcommand\thesubsubsection{%
+				\thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
+		}{
+			\renewcommand\thechapter{%
+				\basexii{\value{chapter}}{\x}{\e}}
+			\renewcommand\thesection{%
+				\thechapter.\basexii{\value{section}}{\x}{\e}}
+			\renewcommand\thesubsection{%
+				\thesection.\basexii{\value{subsection}}{\x}{\e}}
+			\renewcommand\thesubsubsection{%
+				\thesubsection.\basexii{\value{subsubsection}}{\x}{\e}}
+		} % end if it's defined
+	}
+}
+}{} % end redefinition of counters block
+%    \end{macrocode}
+% And that's the end.  Thanks for reading, 
+% folks; please email me with any suggestions or improvements.
+% \printindex
diff --git a/Master/texmf-dist/source/fonts/dozenal/dozenal.ins b/Master/texmf-dist/source/fonts/dozenal/dozenal.ins
new file mode 100644
index 00000000000..2d0664d769f
--- /dev/null
+++ b/Master/texmf-dist/source/fonts/dozenal/dozenal.ins
@@ -0,0 +1,63 @@
+% +AMDG  This document was begun on 17 Jan 11EE, the
+% Commemoration of Ss. Marius, Martha, Audifax, and Abachum,
+% MM, and of St. Canute, M, and it is humbly dedicated to
+% them and to the Immaculate Heart of Mary for their
+% prayers, and to the Sacred Heart of Jesus for His mercy.
+%
+% This document is copyright 2015 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3 of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of the files listed in dozenalfilelist.txt.
+
+\input docstrip.tex
+
+\preamble
+This is a generated file.
+
+This document is copyright 2015 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3 of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of the files listed in dozenalfilelist.txt.
+\endpreamble
+
+\keepsilent
+\generate{\file{dozenal.sty}{\from{dozenal.dtx}{package}}}
+
+\Msg{******************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space dozenal.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file dozenal.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{******************************************************}
+
+\endbatchfile