summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/scripts
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2013-11-15 00:51:07 +0000
committerKarl Berry <karl@freefriends.org>2013-11-15 00:51:07 +0000
commitbc1b5e3250223eb944aa85d3e420f400b63e0254 (patch)
tree74ca0858368ead9c5ae0af04bc8597ee1f0a8170 /Master/texmf-dist/scripts
parent4909c173ce26f3b8abbb198131d4c2846918c8b0 (diff)
latexindent (13nov13)
git-svn-id: svn://tug.org/texlive/trunk@32150 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/scripts')
-rwxr-xr-xMaster/texmf-dist/scripts/latexindent/defaultSettings.yaml181
-rwxr-xr-xMaster/texmf-dist/scripts/latexindent/latexindent.pl1784
2 files changed, 1965 insertions, 0 deletions
diff --git a/Master/texmf-dist/scripts/latexindent/defaultSettings.yaml b/Master/texmf-dist/scripts/latexindent/defaultSettings.yaml
new file mode 100755
index 00000000000..457629ce863
--- /dev/null
+++ b/Master/texmf-dist/scripts/latexindent/defaultSettings.yaml
@@ -0,0 +1,181 @@
+#
+# defaultSettings.yaml
+#
+# You're welcome to change anything you like in here, but
+# it would probably be better to have your own user settings
+# files somewhere else- remember that this file may be overwritten
+# anytime that you update your distribution. Please see the manual
+# for details of how to setup your own settings files.
+#
+# Please read the manual first to understand what each switch does :)
+
+# Default value of indentation
+defaultIndent: "\t"
+
+# default file extension of backup file (if original is overwritten with -w switch)
+# for example, if your .tex file is called
+# myfile.tex
+# and you specify the backupExtension as BACKUP.bak then your
+# backup file will be
+# myfileBACKUP.bak
+backupExtension: .bak
+
+# only one backup per file; if onlyOneBackUp is 0 then the
+# number on the extension increments by 1 each time
+# (this is in place as a safety measure) myfile.bak0, myfile.bak1, myfile.bak2
+#
+# if you set onlyOnebackUp to 1, then the backup file will
+# be overwritten each time (not recommended until you trust the script)
+onlyOneBackUp: 0
+
+# some users may only want a set number of backup files,
+# say at most 3; in which case, they can change this switch.
+# If maxNumberOfBackUps is set to 0 (or less) then infinitely
+# many backups are possible, unless onlyOneBackUp is switched on
+maxNumberOfBackUps: 0
+
+# indent preamble
+indentPreamble: 0
+
+# always look for split { }, which means that the user doesn't
+# have to complete checkunmatched, checkunmatchedELSE
+alwaysLookforSplitBraces: 1
+
+# always look for split [ ], which means that the user doesn't
+# have to complete checkunmatchedbracket
+alwaysLookforSplitBrackets: 1
+
+# remove trailing whitespace from all lines
+removeTrailingWhitespace: 0
+
+# environments that have tab delimiters, add more
+# as needed
+lookForAlignDelims:
+ tabular: 1
+ tabularx: 1
+ array: 1
+ matrix: 1
+ bmatrix: 1
+ pmatrix: 1
+ align: 1
+ align*: 1
+ alignat: 1
+ alignat*: 1
+ aligned: 1
+ cases: 1
+ dcases: 1
+ pmatrix: 1
+ listabla: 1
+
+# if you have indent rules for particular environments
+# or commands, put them in here; for example, you might just want
+# to use a space " " or maybe a double tab "\t\t"
+indentRules:
+ myenvironment: "\t\t"
+ anotherenvironment: "\t\t\t\t"
+ chapter: " "
+ section: " "
+
+# verbatim environments- environments specified
+# in this hash table will not be changed at all!
+verbatimEnvironments:
+ verbatim: 1
+ lstlisting: 1
+
+# no indent blocks (not necessarily verbatim
+# environments) which are marked as %\begin{noindent}
+# or anything else that the user puts in this hash
+# table
+noIndentBlock:
+ noindent: 1
+ cmhtest: 1
+
+# if you don't want to have additional indentation
+# in an environment put it in this hash table; note that
+# environments in this hash table will inherit
+# the *current* level of indentation they just won't
+# get any *additional*.
+noAdditionalIndent:
+ myexample: 1
+ mydefinition: 1
+ problem: 1
+ exercises: 1
+ mysolution: 1
+ foreach: 0
+ widepage: 1
+ comment: 1
+ \[: 0
+ \]: 0
+ document: 1
+ frame: 0
+
+# if you want to add indentation after
+# a heading, such as \part, \chapter, etc
+# then populate it in here - you can add
+# an indent rule to indentRules if you would
+# like something other than defaultIndent
+#
+# you can also change the level if you like,
+# or add your own title command
+indentAfterHeadings:
+ part:
+ indent: 0
+ level: 1
+ chapter:
+ indent: 0
+ level: 2
+ section:
+ indent: 0
+ level: 3
+ subsection:
+ indent: 0
+ level: 4
+ subsection*:
+ indent: 0
+ level: 4
+ subsubsection:
+ indent: 0
+ level: 5
+ paragraph:
+ indent: 0
+ level: 6
+ subparagraph:
+ indent: 0
+ level: 7
+
+# *** NOTE ***
+# If you have specified alwaysLookforSplitBraces: 1
+# and alwaysLookforSplitBrackets: 1 then you don't need
+# to worry about completing
+#
+# checkunmatched
+# checkunmatchedELSE
+# checkunmatchedbracket
+#
+# in other words, you don't really need to edit anything
+# below this line- it used to be necessary for older
+# versions of the script, but not anymore :)
+#*** ***
+
+# commands that might split {} across lines
+# such as \parbox, \marginpar, etc
+checkunmatched:
+ parbox: 1
+ vbox: 1
+
+# very similar to %checkunmatched except these
+# commands might have an else construct
+checkunmatchedELSE:
+ pgfkeysifdefined: 1
+ DTLforeach: 1
+ ifthenelse: 1
+
+# commands that might split [] across lines
+# such as \pgfplotstablecreatecol, etc
+checkunmatchedbracket:
+ pgfplotstablecreatecol: 1
+ pgfplotstablesave: 1
+ pgfplotstabletypeset: 1
+ mycommand: 1
+ psSolid: 1
+
diff --git a/Master/texmf-dist/scripts/latexindent/latexindent.pl b/Master/texmf-dist/scripts/latexindent/latexindent.pl
new file mode 100755
index 00000000000..74ab7ebb3e5
--- /dev/null
+++ b/Master/texmf-dist/scripts/latexindent/latexindent.pl
@@ -0,0 +1,1784 @@
+#!/usr/bin/perl
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# See http://www.gnu.org/licenses/.
+#
+# For details of how to use this file, please see readme.txt
+
+# load packages/modules
+use strict;
+use warnings;
+use FindBin; # help find defaultSettings.yaml
+use YAML::Tiny; # interpret defaultSettings.yaml
+use File::Copy; # to copy the original file to backup (if overwrite option set)
+use File::Basename; # to get the filename and directory path
+#use Getopt::Std;
+use Getopt::Long; # to get the switches/options/flags
+use File::HomeDir; # to get users home directory, regardless of OS
+
+# get the options
+my $overwrite;
+my $outputToFile;
+my $silentMode;
+my $tracingMode;
+my $readLocalSettings;
+my $onlyDefault;
+my $showhelp;
+my $cruftDirectory='./';
+
+GetOptions ("w"=>\$overwrite,
+"o"=>\$outputToFile,
+"s"=>\$silentMode,
+"t"=>\$tracingMode,
+"l"=>\$readLocalSettings,
+"d"=>\$onlyDefault,
+"h"=>\$showhelp,
+"c=s"=>\$cruftDirectory,
+);
+
+die "Could not find directory $cruftDirectory\nExiting, no indentation done." if(!(-d $cruftDirectory));
+
+# version number
+my $versionNumber = "1.1R";
+
+# Check the number of input arguments- if it is 0 then simply
+# display the list of options (like a manual)
+if(scalar(@ARGV) < 1 or $showhelp)
+{
+ print <<ENDQUOTE
+latexindent.pl version $versionNumber
+usage: latexindent.pl [options] [file][.tex]
+ -h help (see the documentation for detailed instructions and examples)
+ -o output to another file; sample usage
+ latexindent.pl -o myfile.tex outputfile.tex
+ -w overwrite the current file- a backup will be made, but still be careful
+ -s silent mode- no output will be given to the terminal
+ -t tracing mode- verbose information given to the log file
+ -l use localSettings.yaml (assuming it exists in the directory of your file)
+ -d ONLY use defaultSettings.yaml, ignore ALL user files
+ -c=cruft directory used to specify the location of backup files and indent.log
+ENDQUOTE
+ ;
+ exit(2);
+}
+
+
+# we'll be outputting to the logfile and to standard output
+my $logfile;
+my $out = *STDOUT;
+
+# open the log file
+open($logfile,">","$cruftDirectory/indent.log") or die "Can't open indent.log";
+
+# output time to log file
+my $time = localtime();
+print $logfile $time;
+
+# output version to log file
+print $logfile <<ENDQUOTE
+
+latexindent.pl version $versionNumber, a script to indent .tex files
+latexindent.pl lives here: $FindBin::RealBin/
+
+Directory for backup files and indent.log: $cruftDirectory
+
+file: $ARGV[0]
+ENDQUOTE
+;
+
+# a quick options check
+if($outputToFile and $overwrite)
+{
+ print $logfile <<ENDQUOTE
+
+WARNING:
+\t You have called latexindent.pl with both -o and -w
+\t -o (output to file) will take priority, and -w (over write) will be ignored
+
+ENDQUOTE
+;
+ $overwrite = 0;
+}
+
+# can't call the script with MORE THAN 2 files
+if(scalar(@ARGV)>2)
+{
+ for my $fh ($out,$logfile) {print $fh <<ENDQUOTE
+
+ERROR:
+\t You're calling latexindent.pl with more than two file names
+\t The script can take at MOST two file names, but you
+\t need to call it with the -o switch; for example
+
+\t latexindent.pl -o originalfile.tex outputfile.tex
+
+No indentation done :(
+Exiting...
+ENDQUOTE
+ };
+ exit(2);
+}
+
+# don't call the script with 2 files unless the -o flag is active
+if(!$outputToFile and scalar(@ARGV)==2)
+{
+for my $fh ($out,$logfile) {
+print $fh <<ENDQUOTE
+
+ERROR:
+\t You're calling latexindent.pl with two file names, but not the -o flag.
+\t Did you mean to use the -o flag ?
+
+No indentation done :(
+Exiting...
+ENDQUOTE
+};
+ exit(2);
+}
+
+# if the script is called with the -o switch, then check that
+# a second file is present in the call, e.g
+# latexindent.pl -o myfile.tex output.tex
+if($outputToFile and scalar(@ARGV)==1)
+{
+ for my $fh ($out,$logfile) {print $fh <<ENDQUOTE
+ERROR: When using the -o flag you need to call latexindent.pl with 2 arguments
+
+latexindent.pl -o "$ARGV[0]" [needs another name here]
+
+No indentation done :(
+Exiting...
+ENDQUOTE
+};
+ exit(2);
+}
+
+
+# Read in YAML file
+my $defaultSettings = YAML::Tiny->new;
+
+print $logfile "Reading defaultSettings.yaml from $FindBin::Bin/defaultSettings.yaml\n\n";
+
+# Open defaultSettings.yaml
+$defaultSettings = YAML::Tiny->read( "$FindBin::Bin/defaultSettings.yaml" );
+
+if(!$defaultSettings)
+{
+ for my $fh ($out,$logfile) {
+ print $fh <<ENDQUOTE
+ ERROR There seems to be a yaml formatting error in defaultSettings.yaml
+ Please check it for mistakes- you can find a working version at https://github.com/cmhughes/latexindent.plx
+ if you would like to overwrite your current version
+
+ Exiting, no indendation done.
+ENDQUOTE
+};
+ exit(2);
+}
+
+# setup the DEFAULT variables and hashes from the YAML file
+
+# scalar variables
+my $defaultIndent = $defaultSettings->[0]->{defaultIndent};
+my $alwaysLookforSplitBraces = $defaultSettings->[0]->{alwaysLookforSplitBraces};
+my $alwaysLookforSplitBrackets = $defaultSettings->[0]->{alwaysLookforSplitBrackets};
+my $backupExtension = $defaultSettings->[0]->{backupExtension};
+my $indentPreamble = $defaultSettings->[0]->{indentPreamble};
+my $onlyOneBackUp = $defaultSettings->[0]->{onlyOneBackUp};
+my $maxNumberOfBackUps = $defaultSettings->[0]->{maxNumberOfBackUps};
+my $removeTrailingWhitespace = $defaultSettings->[0]->{removeTrailingWhitespace};
+
+# hash variables
+my %lookForAlignDelims= %{$defaultSettings->[0]->{lookForAlignDelims}};
+my %indentRules= %{$defaultSettings->[0]->{indentRules}};
+my %verbatimEnvironments= %{$defaultSettings->[0]->{verbatimEnvironments}};
+my %noIndentBlock= %{$defaultSettings->[0]->{noIndentBlock}};
+my %checkunmatched= %{$defaultSettings->[0]->{checkunmatched}};
+my %checkunmatchedELSE= %{$defaultSettings->[0]->{checkunmatchedELSE}};
+my %checkunmatchedbracket= %{$defaultSettings->[0]->{checkunmatchedbracket}};
+my %noAdditionalIndent= %{$defaultSettings->[0]->{noAdditionalIndent}};
+my %indentAfterHeadings= %{$defaultSettings->[0]->{indentAfterHeadings}};
+
+# need new hashes to store the user and local data before
+# overwriting the default
+my %lookForAlignDelimsUSER;
+my %indentRulesUSER;
+my %verbatimEnvironmentsUSER;
+my %noIndentBlockUSER;
+my %checkunmatchedUSER;
+my %checkunmatchedELSEUSER;
+my %checkunmatchedbracketUSER;
+my %noAdditionalIndentUSER;
+my %indentAfterHeadingsUSER;
+
+# for printing the user and local settings to the log file
+my %dataDump;
+
+# empty array to store the paths
+my @absPaths;
+
+# scalar to read user settings
+my $userSettings;
+
+# get information about user settings- first check if indentconfig.yaml exists
+my $indentconfig = File::HomeDir->my_home . "/indentconfig.yaml";
+if ( -e $indentconfig and !$onlyDefault )
+{
+ print $logfile "Reading path information from ",File::HomeDir->my_home,"/indentconfig.yaml\n";
+
+ # read the absolute paths from indentconfig.yaml
+ $userSettings = YAML::Tiny->read( "$indentconfig" );
+
+ # integrity check
+ if($userSettings)
+ {
+ %dataDump = %{$userSettings->[0]};
+ print $logfile Dump \%dataDump;
+ print $logfile "\n";
+ @absPaths = @{$userSettings->[0]->{paths}};
+ }
+ else
+ {
+ print $logfile <<ENDQUOTE
+WARNING: $indentconfig
+ contains some invalid .yaml formatting- unable to read from it.
+ No user settings loaded.
+ENDQUOTE
+;
+ }
+}
+else
+{
+ if($onlyDefault)
+ {
+ print $logfile "Only default settings requested, not reading USER settings from indentconfig.yaml \n";
+ print $logfile "Ignoring localSettings.yaml\n" if($readLocalSettings);
+ $readLocalSettings = 0;
+ }
+ else
+ {
+ # give the user instructions on where to put indentconfig.yaml
+ print $logfile "Home directory is ",File::HomeDir->my_home,"\n";
+ print $logfile "To specify user settings you would put indentconfig.yaml here: \n\t",File::HomeDir->my_home,"/indentconfig.yaml\n\n";
+ }
+}
+
+# get information about LOCAL settings, assuming that localSettings.yaml exists
+my $directoryName = dirname $ARGV[0];
+
+# add local settings to the paths, if appropriate
+if ( (-e "$directoryName/localSettings.yaml") and $readLocalSettings and !(-z "$directoryName/localSettings.yaml"))
+{
+ print $logfile "\nAdding ./localSettings.yaml to paths\n\n";
+ push(@absPaths,"$directoryName/localSettings.yaml");
+}
+elsif ( !(-e "$directoryName/localSettings.yaml") and $readLocalSettings)
+{
+ print $logfile "WARNING\n\t$directoryName/localSettings.yaml not found\n";
+ print $logfile "\tcarrying on without it.\n";
+}
+
+# read in the settings from each file
+foreach my $settings (@absPaths)
+{
+ # check that the settings file exists and that it isn't empty
+ if (-e $settings and !(-z $settings))
+ {
+ print $logfile "Reading USER settings from $settings\n";
+ $userSettings = YAML::Tiny->read( "$settings" );
+
+ # if we can read userSettings
+ if($userSettings)
+ {
+ # output settings to $logfile
+ %dataDump = %{$userSettings->[0]};
+ print $logfile Dump \%dataDump;
+ print $logfile "\n";
+
+ # scalar variables
+ $defaultIndent = $userSettings->[0]->{defaultIndent} if defined($userSettings->[0]->{defaultIndent});
+ $alwaysLookforSplitBraces = $userSettings->[0]->{alwaysLookforSplitBraces} if defined($userSettings->[0]->{alwaysLookforSplitBraces});
+ $alwaysLookforSplitBrackets = $userSettings->[0]->{alwaysLookforSplitBrackets} if defined($userSettings->[0]->{alwaysLookforSplitBrackets});
+ $backupExtension = $userSettings->[0]->{backupExtension} if defined($userSettings->[0]->{backupExtension});
+ $indentPreamble = $userSettings->[0]->{indentPreamble} if defined($userSettings->[0]->{indentPreamble});
+ $onlyOneBackUp = $userSettings->[0]->{onlyOneBackUp} if defined($userSettings->[0]->{onlyOneBackUp});
+ $maxNumberOfBackUps = $userSettings->[0]->{maxNumberOfBackUps} if defined($userSettings->[0]->{maxNumberOfBackUps});
+ $removeTrailingWhitespace = $userSettings->[0]->{removeTrailingWhitespace} if defined($userSettings->[0]->{removeTrailingWhitespace});
+
+ # hash variables - note that each one requires two lines,
+ # one to read in the data, one to put the keys&values in correctly
+
+ %lookForAlignDelimsUSER= %{$userSettings->[0]->{lookForAlignDelims}} if defined($userSettings->[0]->{lookForAlignDelims});
+ @lookForAlignDelims{ keys %lookForAlignDelimsUSER } = values %lookForAlignDelimsUSER if (%lookForAlignDelimsUSER);
+
+ %indentRulesUSER= %{$userSettings->[0]->{indentRules}} if defined($userSettings->[0]->{indentRules});
+ @indentRules{ keys %indentRulesUSER } = values %indentRulesUSER if (%indentRulesUSER);
+
+ %verbatimEnvironmentsUSER= %{$userSettings->[0]->{verbatimEnvironments}} if defined($userSettings->[0]->{verbatimEnvironments});
+ @verbatimEnvironments{ keys %verbatimEnvironmentsUSER } = values %verbatimEnvironmentsUSER if (%verbatimEnvironmentsUSER);
+
+ %noIndentBlockUSER= %{$userSettings->[0]->{noIndentBlock}} if defined($userSettings->[0]->{noIndentBlock});
+ @noIndentBlock{ keys %noIndentBlockUSER } = values %noIndentBlockUSER if (%noIndentBlockUSER);
+
+ %checkunmatchedUSER= %{$userSettings->[0]->{checkunmatched}} if defined($userSettings->[0]->{checkunmatched});
+ @checkunmatched{ keys %checkunmatchedUSER } = values %checkunmatchedUSER if (%checkunmatchedUSER);
+
+ %checkunmatchedbracketUSER= %{$userSettings->[0]->{checkunmatchedbracket}} if defined($userSettings->[0]->{checkunmatchedbracket});
+ @checkunmatchedbracket{ keys %checkunmatchedbracketUSER } = values %checkunmatchedbracketUSER if (%checkunmatchedbracketUSER);
+
+ %noAdditionalIndentUSER= %{$userSettings->[0]->{noAdditionalIndent}} if defined($userSettings->[0]->{noAdditionalIndent});
+ @noAdditionalIndent{ keys %noAdditionalIndentUSER } = values %noAdditionalIndentUSER if (%noAdditionalIndentUSER);
+
+ %indentAfterHeadingsUSER= %{$userSettings->[0]->{indentAfterHeadings}} if defined($userSettings->[0]->{indentAfterHeadings});
+ @indentAfterHeadings{ keys %indentAfterHeadingsUSER } = values %indentAfterHeadingsUSER if (%indentAfterHeadingsUSER);
+
+ }
+ else
+ {
+ # otherwise print a warning that we can not read userSettings.yaml
+ print $logfile "WARNING\n\t$settings \n\t contains invalid yaml format- not reading from it\n";
+ }
+
+ }
+ else
+ {
+ # otherwise keep going, but put a warning in the log file
+ print $logfile "\nWARNING\n\t",File::HomeDir->my_home,"/indentconfig.yaml\n";
+ if (-z $settings)
+ {
+ print $logfile "\tspecifies $settings \n\tbut this file is EMPTY- not reading from it\n\n"
+ }
+ else
+ {
+ print $logfile "\tspecifies $settings \n\tbut this file does not exist- unable to read settings from this file\n\n"
+ }
+ }
+}
+
+
+# if we want to over write the current file
+# create a backup first
+if ($overwrite)
+{
+ print $logfile "\nBackup procedure:\n";
+ # original name of file
+ my $filename = $ARGV[0];
+ # copy it
+ my $backupFile = $filename;
+
+ # add the user's backup directory to the backup path
+ $backupFile = "$cruftDirectory/$backupFile";
+
+ # if both ($onlyOneBackUp and $maxNumberOfBackUps) then we have
+ # a conflict- er on the side of caution and turn off onlyOneBackUp
+ if($onlyOneBackUp and $maxNumberOfBackUps>1)
+ {
+ print $logfile "\t WARNING: onlyOneBackUp=$onlyOneBackUp and maxNumberOfBackUps: $maxNumberOfBackUps\n";
+ print $logfile "\t\t setting onlyOneBackUp=0 which will allow you to reach $maxNumberOfBackUps back ups\n";
+ $onlyOneBackUp = 0;
+ }
+
+ # if the user has specified that $maxNumberOfBackUps = 1 then
+ # they only want one backup
+ if($maxNumberOfBackUps==1)
+ {
+ $onlyOneBackUp=1 ;
+ print $logfile "\t FYI: you set maxNumberOfBackUps=1, so I'm setting onlyOneBackUp: 1 \n";
+ }
+ elsif($maxNumberOfBackUps<=0 and !$onlyOneBackUp)
+ {
+# print $logfile "\t FYI: maxNumberOfBackUps=$maxNumberOfBackUps which won't have any effect\n";
+# print $logfile "\t on the script- at least ONE backup is made when the -w flag is invoked.\n";
+# print $logfile "\t I'm setting onlyOneBackUp: 0, which means that you'll get a new back up file \n";
+# print $logfile "\t every time you run the script.\n";
+ $onlyOneBackUp=0 ;
+ $maxNumberOfBackUps=-1;
+ }
+
+ # if onlyOneBackUp is set, then the backup file will
+ # be overwritten each time
+ if($onlyOneBackUp)
+ {
+ $backupFile =~ s/\.tex/$backupExtension/;
+ print $logfile "\t copying $filename to $backupFile\n";
+ print $logfile "\t $backupFile was overwritten\n\n" if (-e $backupFile);
+ }
+ else
+ {
+ # start with a backup file .bak0 (or whatever $backupExtension is present)
+ my $backupCounter = 0;
+ $backupFile =~ s/\.tex$/$backupExtension$backupCounter/;
+
+ # if it exists, then keep going: .bak0, .bak1, ...
+ while (-e $backupFile or $maxNumberOfBackUps>1)
+ {
+ if($backupCounter==$maxNumberOfBackUps)
+ {
+ print $logfile "\t maxNumberOfBackUps reached ($maxNumberOfBackUps)\n";
+ $maxNumberOfBackUps=1 ;
+ last; # break out of the loop
+ }
+ elsif(!(-e $backupFile))
+ {
+ $maxNumberOfBackUps=1 ;
+ last; # break out of the loop
+ }
+ print $logfile "\t $backupFile already exists, incrementing by 1...\n";
+ $backupCounter++;
+ $backupFile =~ s/$backupExtension.*/$backupExtension$backupCounter/;
+ }
+ print $logfile "\n\t copying $filename to $backupFile\n\n";
+ }
+
+ # output these lines to the log file
+ print $logfile "\t Backup file: ",$backupFile,"\n";
+ print $logfile "\t Overwriting file: ",$filename,"\n\n";
+ copy($filename,$backupFile) or die "Could not write to backup file $backupFile. Please check permissions. Exiting.\n";
+}
+
+if(!($outputToFile or $overwrite))
+{
+ print $logfile "Just out put to the terminal :)\n\n" if !$silentMode ;
+}
+
+
+# scalar variables
+my $line; # $line: takes the $line of the file
+my $inpreamble=!$indentPreamble;
+ # $inpreamble: switch to determine if in
+ # preamble or not
+my $inverbatim=0; # $inverbatim: switch to determine if in
+ # a verbatim environment or not
+my $delimiters=0; # $delimiters: switch that governs if
+ # we need to check for & or not
+my $matchedbraces=0; # $matchedbraces: counter to see if { }
+ # are matched; it will be
+ # positive if too many {
+ # negative if too many }
+ # 0 if matched
+my $matchedBRACKETS=0; # $matchedBRACKETS: counter to see if [ ]
+ # are matched; it will be
+ # positive if too many {
+ # negative if too many }
+ # 0 if matched
+my $commandname; # $commandname: either \parbox, \marginpar,
+ # or anything else from %checkunmatched
+my $commanddetails; # $command details: a scalar that stores
+ # details about the command
+ # that splits {} across lines
+my $countzeros; # $countzeros: a counter that helps
+ # when determining if we're in
+ # an else construct
+my $lookforelse=0; # $lookforelse: a boolean to help determine
+ # if we need to look for an
+ # else construct
+my $trailingcomments; # $trailingcomments stores the comments at the end of
+ # a line
+my $lineCounter=0; # $lineCounter keeps track of the line number
+my $inIndentBlock=0; # $inindentblock: switch to determine if in
+ # a inindentblock or not
+my $headingLevel=0; # $headingLevel: scalar that stores which heading
+ # we are under: \part, \chapter, etc
+
+# array variables
+my @indent; # @indent: stores current level of indentation
+my @lines; # @lines: stores the newly indented lines
+my @block; # @block: stores blocks that have & delimiters
+my @commandstore; # @commandstore: stores commands that
+ # have split {} across lines
+my @commandstorebrackets; # @commandstorebrackets: stores commands that
+ # have split [] across lines
+my @mainfile; # @mainfile: stores input file; used to
+ # grep for \documentclass
+my @headingStore; # @headingStore: stores headings: chapter, section, etc
+my @indentNames; # @indentNames: keeps names of commands and
+ # environments that have caused
+ # indentation to increase
+my @environmentStack; # @environmentStack: stores the (nested) names
+ # of environments
+
+# check to see if the current file has \documentclass, if so, then
+# it's the main file, if not, then it doesn't have preamble
+open(MAINFILE, $ARGV[0]) or die "Could not open input file";
+ @mainfile=<MAINFILE>;
+close(MAINFILE);
+
+# if the MAINFILE doesn't have a \documentclass statement, then
+# it shouldn't have preamble
+if(scalar(@{[grep(m/^\s*\\documentclass/, @mainfile)]})==0)
+{
+ $inpreamble=0;
+
+ print $logfile "Trace:\tNo documentclass detected, assuming no preamble\n" if($tracingMode);
+}
+else
+{
+ print $logfile "Trace:\t documentclass detected, assuming preamble\n" if($tracingMode);
+}
+
+# the previous OPEN command puts us at the END of the file
+open(MAINFILE, $ARGV[0]) or die "Could not open input file";
+
+# loop through the lines in the INPUT file
+while(<MAINFILE>)
+{
+ # increment the line counter
+ $lineCounter++;
+
+ # tracing mode
+ print $logfile "\n" if($tracingMode and !($inpreamble or $inverbatim or $inIndentBlock));
+
+ # check to see if we're still in the preamble
+ # or in a verbatim environment or in IndentBlock
+ if(!($inpreamble or $inverbatim or $inIndentBlock))
+ {
+ # if not, remove all leading spaces and tabs
+ # from the current line, assuming it isn't empty
+ #s/^\ *//;
+ #s/^\s+//;
+ #s/^\t+//;
+ s/^\t*// if($_ !~ /^((\s*)|(\t*))*$/);
+ s/^\s*// if($_ !~ /^((\s*)|(\t*))*$/);
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t removing leading spaces\n" if($tracingMode);
+ }
+ else
+ {
+ # otherwise check to see if we've reached the main
+ # part of the document
+ if(m/^\s*\\begin{document}/)
+ {
+ $inpreamble = 0;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t \\begin{document} found \n" if($tracingMode);
+ }
+ else
+ {
+ # tracing mode
+ if($inpreamble)
+ {
+ print $logfile "Line $lineCounter\t still in PREAMBLE, doing nothing\n" if($tracingMode);
+ }
+ elsif($inverbatim)
+ {
+ print $logfile "Line $lineCounter\t in VERBATIM-LIKE environment, doing nothing\n" if($tracingMode);
+ }
+ elsif($inIndentBlock)
+ {
+ print $logfile "Line $lineCounter\t in NO INDENT BLOCK, doing nothing\n" if($tracingMode);
+ }
+ }
+ }
+
+ # check to see if we have \end{something} or \]
+ &at_end_of_env_or_eq() unless ($inpreamble or $inIndentBlock);
+
+ # check to see if we're at the end of a noindent
+ # block %\end{noindent}
+ &at_end_noindent();
+
+ # only check for unmatched braces if we're not in
+ # a verbatim-like environment or in the preamble or in a
+ # noIndentBlock
+ if(!($inverbatim or $inpreamble or $inIndentBlock))
+ {
+ # The check for closing } and ] relies on counting, so
+ # we have to remove trailing comments so that any {, }, [, ]
+ # that are found after % are not counted
+ #
+ # note that these lines are NOT in @lines, so we
+ # have to store the $trailingcomments to put
+ # back on after the counting
+ #
+ # note the use of (?<!\\)% so that we don't match \%
+ if ( $_=~ m/(?<!\\)%.*/)
+ {
+ s/((?<!\\)%.*)//;
+ $trailingcomments=$1;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Removed trailing comments to count braces and brackets: $1\n" if($tracingMode);
+ }
+
+ # check to see if we're at the end of a \parbox, \marginpar
+ # or other split-across-lines command and check that
+ # we're not starting another command that has split braces (nesting)
+ &end_command_or_key_unmatched_braces();
+
+ # check to see if we're at the end of a command that splits
+ # [ ] across lines
+ &end_command_or_key_unmatched_brackets();
+
+ # check for a heading
+ &indent_heading();
+
+ # add the trailing comments back to the end of the line
+ if(scalar($trailingcomments))
+ {
+ # some line break magic, http://stackoverflow.com/questions/881779/neatest-way-to-remove-linebreaks-in-perl
+ s/\R//;
+ $_ = $_ . $trailingcomments."\n" ;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t counting braces/brackets complete: added trailing comments back on $trailingcomments\n" if($tracingMode);
+
+ # empty the trailingcomments
+ $trailingcomments='';
+
+ }
+ }
+
+ # remove trailing whitespace
+ if ($removeTrailingWhitespace)
+ {
+ print $logfile "Line $lineCounter\t removing trailing whitespace\n" if ($tracingMode);
+ s/\s+$/\n/;
+ }
+
+ # ADD CURRENT LEVEL OF INDENTATION
+ # (unless we're in a delimiter-aligned block)
+ if(!$delimiters)
+ {
+ # make sure we're not in a verbatim block or in the preamble
+ if($inverbatim or $inpreamble or $inIndentBlock)
+ {
+ # just push the current line as is
+ push(@lines,$_);
+ }
+ else
+ {
+ # add current value of indentation to the current line
+ # and output it
+ # unless this would only create trailing whitespace and the
+ # corresponding option is set
+ unless ($_ =~ m/^$/ and $removeTrailingWhitespace){
+ $_ = join("",@indent).$_;
+ }
+ push(@lines,$_);
+ # tracing mode
+ print $logfile "Line $lineCounter\t Adding current level of indentation: ",join(", ",@indentNames),"\n" if($tracingMode);
+ }
+ }
+ else
+ {
+ # output to @block if we're in a delimiter block
+ push(@block,$_);
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t In delimeter block, waiting for block formatting\n" if($tracingMode);
+ }
+
+ # only check for new environments or commands if we're
+ # not in a verbatim-like environment or in the preamble
+ # or in a noIndentBlock, or delimiter block
+ if(!($inverbatim or $inpreamble or $inIndentBlock or $delimiters))
+ {
+
+ # check if we are in a
+ # % \begin{noindent}
+ # block; this is similar to a verbatim block, the user
+ # may not want some blocks of code to be touched
+ #
+ # IMPORTANT: this needs to go before the trailing comments
+ # are removed!
+ &at_beg_noindent();
+
+ # remove trailing comments so that any {, }, [, ]
+ # that are found after % are not counted
+ #
+ # note that these lines are already in @lines, so we
+ # can remove the trailing comments WITHOUT having
+ # to put them back in
+ #
+ # Note that this won't match \%
+ s/(?<!\\)%.*// if( $_=~ m/(?<!\\)%.*/);
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Removing trailing comments for brace count (line is already stored)\n" if($tracingMode);
+
+ # check to see if we have \begin{something} or \[
+ &at_beg_of_env_or_eq();
+
+ # check to see if we have \parbox, \marginpar, or
+ # something similar that might split braces {} across lines,
+ # specified in %checkunmatched hash table
+ &start_command_or_key_unmatched_braces();
+
+ # check for an else statement
+ &check_for_else();
+
+ # check for a command that splits [] across lines
+ &start_command_or_key_unmatched_brackets();
+
+ # check for a heading
+ &indent_after_heading();
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Environments: ",join(", ",@environmentStack),"\n" if($tracingMode and scalar(@environmentStack));
+ }
+}
+
+# close the main file
+close(MAINFILE);
+
+# put line count information in the log file
+print $logfile "Line Count of $ARGV[0]: ",scalar(@mainfile),"\n";
+print $logfile "Line Count of indented $ARGV[0]: ",scalar(@lines);
+if(scalar(@mainfile) != scalar(@lines))
+{
+ print $logfile <<ENDQUOTE
+WARNING: \t line count of original file and indented file does
+\t not match- consider reverting to a back up, see $backupExtension;
+ENDQUOTE
+;
+}
+else
+{
+ print $logfile "\n\nLine counts of original file and indented file match";
+}
+
+# output the formatted lines to the terminal
+print @lines if(!$silentMode);
+
+# if -w is active then output to $ARGV[0]
+if($overwrite)
+{
+ open(OUTPUTFILE,">",$ARGV[0]);
+ print OUTPUTFILE @lines;
+ close(OUTPUTFILE);
+}
+
+# if -o is active then output to $ARGV[1]
+if($outputToFile)
+{
+ open(OUTPUTFILE,">",$ARGV[1]);
+ print OUTPUTFILE @lines;
+ close(OUTPUTFILE);
+}
+
+# close the log file
+close($logfile);
+
+exit;
+
+sub indent_heading{
+ # PURPOSE: This matches
+ # \part
+ # \chapter
+ # \section
+ # \subsection
+ # \subsubsection
+ # \paragraph
+ # \subparagraph
+ #
+ # and anything else listed in indentAfterHeadings
+ #
+ # This subroutine specifies the indentation for the
+ # heading itself, i.e the line that has \chapter, \section etc
+ if( $_ =~ m/^\s*\\(.*?)(\[|{)/ and $indentAfterHeadings{$1})
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t Heading found: $1 \n" if($tracingMode);
+
+ # get the heading settings- it's a hash within a hash
+ my %currentHeading = %{$indentAfterHeadings{$1}};
+
+ # local scalar
+ my $previousHeadingLevel = $headingLevel;
+
+ # if current heading level < old heading level,
+ if($currentHeading{level}<$previousHeadingLevel)
+ {
+ # decrease indentation, but only if
+ # specified in indentHeadings. Note that this check
+ # needs to be done here- decrease_indent won't
+ # check a nested hash
+
+ if(scalar(@headingStore))
+ {
+ while($currentHeading{level}<$previousHeadingLevel and scalar(@headingStore))
+ {
+ my $higherHeadingName = pop(@headingStore);
+ my %higherLevelHeading = %{$indentAfterHeadings{$higherHeadingName}};
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t stepping UP heading level from $higherHeadingName \n" if($tracingMode);
+
+ &decrease_indent($higherHeadingName) if($higherLevelHeading{indent});
+ $previousHeadingLevel=$higherLevelHeading{level};
+ }
+ # put the heading name back in to storage
+ push(@headingStore,$1);
+ }
+ }
+ elsif($currentHeading{level}==$previousHeadingLevel)
+ {
+ if(scalar(@headingStore))
+ {
+ my $higherHeadingName = pop(@headingStore);
+ my %higherLevelHeading = %{$indentAfterHeadings{$higherHeadingName}};
+ &decrease_indent($higherHeadingName) if($higherLevelHeading{indent});
+ }
+ # put the heading name back in to storage
+ push(@headingStore,$1);
+ }
+ else
+ {
+ # put the heading name into storage
+ push(@headingStore,$1);
+ }
+ }
+}
+
+sub indent_after_heading{
+ # PURPOSE: This matches
+ # \part
+ # \chapter
+ # \section
+ # \subsection
+ # \subsubsection
+ # \paragraph
+ # \subparagraph
+ #
+ # and anything else listed in indentAfterHeadings
+ #
+ # This subroutine is specifies the indentation for
+ # the text AFTER the heading, i.e the body of conent
+ # in each \chapter, \section, etc
+ if( $_ =~ m/^\s*\\(.*?)(\[|{)/ and $indentAfterHeadings{$1})
+ {
+ # get the heading settings- it's a hash within a hash
+ my %currentHeading = %{$indentAfterHeadings{$1}};
+
+ &increase_indent($1) if($currentHeading{indent});
+
+ # update heading level
+ $headingLevel = $currentHeading{level};
+ }
+}
+
+
+
+sub at_end_noindent{
+ # PURPOSE: This matches
+ # % \end{noindent}
+ # with any number of spaces (possibly none) between
+ # the comment and \end{noindent}.
+ #
+ # the comment symbol IS indended!
+ #
+ # This is for blocks of code that the user wants
+ # to leave untouched- similar to verbatim blocks
+
+ if( $_ =~ m/^%\s*\\end{(.*?)}/ and $noIndentBlock{$1})
+ {
+ $inIndentBlock=0;
+ # tracing mode
+ print $logfile "Line $lineCounter\t % \\end{no indent block} found, switching inIndentBlock OFF \n" if($tracingMode);
+ }
+}
+
+sub at_beg_noindent{
+ # PURPOSE: This matches
+ # % \begin{noindent}
+ # with any number of spaces (possibly none) between
+ # the comment and \begin{noindent}.
+ #
+ # the comment symbol IS indended!
+ #
+ # This is for blocks of code that the user wants
+ # to leave untouched- similar to verbatim blocks
+
+ if( $_ =~ m/^%\s*\\begin{(.*?)}/ and $noIndentBlock{$1})
+ {
+ $inIndentBlock = 1;
+ # tracing mode
+ print $logfile "Line $lineCounter\t % \\begin{no indent block} found, switching inIndentBlock ON \n" if($tracingMode);
+ }
+}
+
+sub start_command_or_key_unmatched_brackets{
+ # PURPOSE: This matches
+ # \pgfplotstablecreatecol[...
+ #
+ # or any other command/key that has brackets [ ]
+ # split across lines specified in the
+ # hash tables, %checkunmatchedbracket
+ #
+ # How to read: ^\s*(\\)?(.*?)(\[\s*)
+ #
+ # ^ line begins with
+ # \s* any (or no)spaces
+ # (\\)? matches a \ backslash but not necessarily
+ # (.*?) non-greedy character match and store the result
+ # ((?<!\\)\[\s*) match [ possibly leading with spaces
+ # but it WON'T match \[
+
+ if ($_ =~ m/^\s*(\\)?(.*?)(\s*(?<!\\)\[)/
+ and (scalar($checkunmatchedbracket{$2})
+ or $alwaysLookforSplitBrackets)
+ )
+ {
+ # store the command name, because $2
+ # will not exist after the next match
+ $commandname = $2;
+ $matchedBRACKETS=0;
+
+ # match [ but don't match \[
+ $matchedBRACKETS++ while ($_ =~ /(?<!\\)\[/g);
+ # match ] but don't match \]
+ $matchedBRACKETS-- while ($_ =~ /(?<!\\)\]/g);
+
+ # set the indentation
+ if($matchedBRACKETS != 0 )
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t Found opening BRACKET [ $commandname\n" if($tracingMode);
+
+ &increase_indent($commandname);
+
+ # store the command name
+ # and the value of $matchedBRACKETS
+ push(@commandstorebrackets,{commandname=>$commandname,
+ matchedBRACKETS=>$matchedBRACKETS});
+
+ }
+ }
+}
+
+sub end_command_or_key_unmatched_brackets{
+ # PURPOSE: Check for the closing BRACKET of a command that
+ # splits its BRACKETS across lines, such as
+ #
+ # \pgfplotstablecreatecol[ ...
+ #
+ # It works by checking if we have any entries
+ # in the array @commandstorebrackets, and making
+ # sure that we're not starting another command/key
+ # that has split BRACKETS (nesting).
+ #
+ # It also checks that the line is not commented.
+ #
+ # We count the number of [ and ADD to the counter
+ # ] and SUBTRACT to the counter
+ if(scalar(@commandstorebrackets)
+ and !($_ =~ m/^\s*(\\)?(.*?)(\s*\[)/
+ and (scalar($checkunmatchedbracket{$2})
+ or $alwaysLookforSplitBrackets))
+ and $_ !~ m/^\s*%/
+ )
+ {
+ # get the details of the most recent command name
+ $commanddetails = pop(@commandstorebrackets);
+ $commandname = $commanddetails->{'commandname'};
+ $matchedBRACKETS = $commanddetails->{'matchedBRACKETS'};
+
+ # match [ but don't match \[
+ $matchedBRACKETS++ while ($_ =~ m/(?<!\\)\[/g);
+
+ # match ] but don't match \]
+ $matchedBRACKETS-- while ($_ =~ m/(?<!\\)\]/g);
+
+ # if we've matched up the BRACKETS then
+ # we can decrease the indent by 1 level
+ if($matchedBRACKETS == 0)
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t Found closing BRACKET ] $commandname\n" if($tracingMode);
+
+ # decrease the indentation (if appropriate)
+ &decrease_indent($commandname);
+ }
+ else
+ {
+ # otherwise we need to enter the new value
+ # of $matchedBRACKETS and the value of $command
+ # back into storage
+ push(@commandstorebrackets,{commandname=>$commandname,
+ matchedBRACKETS=>$matchedBRACKETS});
+ # tracing mode
+ print $logfile "Line $lineCounter\t Searching for closing BRACKET ] $commandname\n" if($tracingMode);
+ }
+ }
+}
+
+sub start_command_or_key_unmatched_braces{
+ # PURPOSE: This matches
+ # \parbox{...
+ # \parbox[..]..{
+ # empty header/.style={
+ # \foreach \something
+ # etc
+ #
+ # or any other command/key that has BRACES
+ # split across lines specified in the
+ # hash tables, %checkunmatched, %checkunmatchedELSE
+ #
+ # How to read: ^\s*(\\)?(.*?)(\[|{|\s)
+ #
+ # ^ line begins with
+ # \s* any (or no) spaces
+ # (\\)? matches a \ backslash but not necessarily
+ # (.*?) non-greedy character match and store the result
+ # (\[|}|=|(\s*\\)) either [ or { or = or space \
+
+ if ($_ =~ m/^\s*(\\)?(.*?)(\[|{|=|(\s*\\))/
+ and (scalar($checkunmatched{$2})
+ or scalar($checkunmatchedELSE{$2})
+ or $alwaysLookforSplitBraces)
+ )
+ {
+ # store the command name, because $2
+ # will not exist after the next match
+ $commandname = $2;
+ $matchedbraces=0;
+
+ # by default, don't look for an else construct
+ $lookforelse=0;
+ if(scalar($checkunmatchedELSE{$2}))
+ {
+ $lookforelse=1;
+ }
+
+ # match { but don't match \{
+ $matchedbraces++ while ($_ =~ /(?<!\\){/g);
+
+ # match } but don't match \}
+ $matchedbraces-- while ($_ =~ /(?<!\\)}/g);
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t matchedbraces = $matchedbraces\n" if($tracingMode);
+
+ # set the indentation
+ if($matchedbraces > 0 )
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t Found opening BRACE { $commandname\n" if($tracingMode);
+
+ &increase_indent($commandname);
+
+ # store the command name
+ # and the value of $matchedbraces
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>0});
+
+ }
+ elsif($matchedbraces<0)
+ {
+ # if $matchedbraces < 0 then we must be matching
+ # braces from a previous split-braces command
+
+ # keep matching { OR }, and don't match \{ or \}
+ while ($_ =~ m/(((?<!\\){)|((?<!\\)}))/g)
+ {
+
+ # store the match, either { or }
+ my $braceType = $1;
+
+ # get the details of the most recent command name
+ $commanddetails = pop(@commandstore);
+ $commandname = $commanddetails->{'commandname'};
+ $matchedbraces = $commanddetails->{'matchedbraces'};
+ $countzeros = $commanddetails->{'countzeros'};
+ $lookforelse= $commanddetails->{'lookforelse'};
+
+ $matchedbraces++ if($1 eq "{");
+ $matchedbraces-- if($1 eq "}");
+
+ # if we've matched up the braces then
+ # we can decrease the indent by 1 level
+ if($matchedbraces == 0)
+ {
+ $countzeros++ if $lookforelse;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Found closing BRACE } $1\n" if($tracingMode);
+
+ # decrease the indentation (if appropriate)
+ &decrease_indent($commandname);
+
+ if($countzeros==1)
+ {
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>$countzeros});
+ }
+ }
+ else
+ {
+ # otherwise we need to put the command back for the
+ # next brace count
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>$countzeros});
+ }
+ }
+ }
+ }
+}
+
+sub end_command_or_key_unmatched_braces{
+ # PURPOSE: Check for the closing BRACE of a command that
+ # splits its BRACES across lines, such as
+ #
+ # \parbox{ ...
+ #
+ # or one of the tikz keys, such as
+ #
+ # empty header/.style={
+ #
+ # It works by checking if we have any entries
+ # in the array @commandstore, and making
+ # sure that we're not starting another command/key
+ # that has split BRACES (nesting).
+ #
+ # It also checks that the line is not commented.
+ #
+ # We count the number of { and ADD to the counter
+ # } and SUBTRACT to the counter
+ if(scalar(@commandstore)
+ and !($_ =~ m/^\s*(\\)?(.*?)(\[|{|=|(\s*\\))/
+ and (scalar($checkunmatched{$2})
+ or scalar($checkunmatchedELSE{$2})
+ or $alwaysLookforSplitBraces))
+ and $_ !~ m/^\s*%/
+ )
+ {
+ # keep matching { OR }, and don't match \{ or \}
+ while ($_ =~ m/(((?<!\\){)|((?<!\\)}))/g)
+ {
+ # store the match, either { or }
+ my $braceType = $1;
+
+ # get the details of the most recent command name
+ $commanddetails = pop(@commandstore);
+ $commandname = $commanddetails->{'commandname'};
+ $matchedbraces = $commanddetails->{'matchedbraces'};
+ $countzeros = $commanddetails->{'countzeros'};
+ $lookforelse= $commanddetails->{'lookforelse'};
+
+ $matchedbraces++ if($1 eq "{");
+ $matchedbraces-- if($1 eq "}");
+
+ # if we've matched up the braces then
+ # we can decrease the indent by 1 level
+ if($matchedbraces == 0)
+ {
+ $countzeros++ if $lookforelse;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Found closing BRACE } $commandname\n" if($tracingMode);
+
+ # decrease the indentation (if appropriate)
+ &decrease_indent($commandname);
+
+ if($countzeros==1)
+ {
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>$countzeros});
+ }
+ }
+ else
+ {
+ # otherwise we need to enter the new value
+ # of $matchedbraces and the value of $command
+ # back into storage
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>$countzeros});
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Searching for closing BRACE } $commandname\n" if($tracingMode);
+ }
+ }
+ }
+}
+
+sub check_for_else{
+ # PURPOSE: Check for an else clause
+ #
+ # Some commands have the form
+ #
+ # \mycommand{
+ # if this
+ # }
+ # {
+ # else this
+ # }
+ #
+ # so we need to look for the else bit, and set
+ # the indentation appropriately.
+ #
+ # We only perform this check if there's something
+ # in the array @commandstore, and if
+ # the line itself is not a command, or comment,
+ # and if it begins with {
+
+ if(scalar(@commandstore)
+ and !($_ =~ m/^\s*(\\)?(.*?)(\[|{|=)/
+ and (scalar($checkunmatched{$2})
+ or scalar($checkunmatchedELSE{$2})
+ or $alwaysLookforSplitBraces))
+ and $_ =~ m/^\s*{/
+ and $_ !~ m/^\s*%/
+ )
+ {
+ # get the details of the most recent command name
+ $commanddetails = pop(@commandstore);
+ $commandname = $commanddetails->{'commandname'};
+ $matchedbraces = $commanddetails->{'matchedbraces'};
+ $countzeros = $commanddetails->{'countzeros'};
+ $lookforelse= $commanddetails->{'lookforelse'};
+
+ # increase indentation
+ if($lookforelse and $countzeros==1)
+ {
+ &increase_indent($commandname);
+ }
+
+ # put the array back together
+ push(@commandstore,{commandname=>$commandname,
+ matchedbraces=>$matchedbraces,
+ lookforelse=>$lookforelse,
+ countzeros=>$countzeros});
+ }
+}
+
+sub at_beg_of_env_or_eq{
+ # PURPOSE: Check if we're at the BEGINning of an environment
+ # or at the BEGINning of a displayed equation \[
+ #
+ # This subroutine checks for matches of the form
+ #
+ # \begin{environmentname}
+ # or
+ # \[
+ #
+ # It also checks to see if the current environment
+ # should have alignment delimiters; if so, we need to turn
+ # ON the $delimiter switch
+
+ # How to read
+ # m/^\s*(\$)?\\begin{(.*?)}/
+ #
+ # ^ beginning of a line
+ # \s* any white spaces (possibly none)
+ # (\$)? possibly a $ symbol, but not required
+ # \\begin{(.*)?} \begin{environmentname}
+ #
+ # How to read
+ # m/^\s*()(\\\[)/
+ #
+ # ^ beginning of a line
+ # \s* any white spaces (possibly none)
+ # () empty just so that $1 and $2 are defined
+ # (\\\[) \[ there are lots of \ because both \ and [ need escaping
+
+ if( ( ( $_ =~ m/^\s*(\$)?\\begin{(.*?)}/ and $_ !~ m/\\end{$2}/)
+ or ($_=~ m/^\s*()(\\\[)/ and $_ !~ m/\\\]/) )
+ and $_ !~ m/^\s*%/ )
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t \\begin{environment} found: $2 \n" if($tracingMode);
+
+ # increase the indentation
+ &increase_indent($2);
+
+ # check for verbatim-like environments
+ if($verbatimEnvironments{$2})
+ {
+ $inverbatim = 1;
+ # tracing mode
+ print $logfile "Line $lineCounter\t \\begin{verbatim-like} found, $2, switching ON verbatim \n" if($tracingMode);
+
+ # remove the key and value from %lookForAlignDelims hash
+ # to avoid any further confusion
+ if($lookForAlignDelims{$2})
+ {
+ print $logfile "WARNING\n\t Line $lineCounter\t $2 is in *both* lookForAlignDelims and verbatimEnvironments\n";
+ print $logfile "\t\t\t ignoring lookForAlignDelims and prioritizing verbatimEnvironments\n";
+ print $logfile "\t\t\t Note that you only get this message once per environment\n";
+ delete $lookForAlignDelims{$2};
+ }
+
+ }
+
+ # check to see if we need to look for alignment
+ # delimiters
+ if($lookForAlignDelims{$2})
+ {
+ $delimiters=1;
+ # tracing mode
+ print $logfile "Line $lineCounter\t Delimiter environment started: $2 (see lookForAlignDelims)\n" if($tracingMode);
+ }
+
+ # store the name of the environment
+ push(@environmentStack,$2);
+
+ }
+}
+
+sub at_end_of_env_or_eq{
+ # PURPOSE: Check if we're at the END of an environment
+ # or at the END of a displayed equation \]
+ #
+ # This subroutine checks for matches of the form
+ #
+ # \end{environmentname}
+ # or
+ # \]
+ #
+ # It also checks to see if the current environment
+ # had alignment delimiters; if so, we need to turn
+ # OFF the $delimiter switch
+
+ if( ($_ =~ m/^\s*\\end{(.*?)}/ or $_=~ m/^(\\\])/)
+ and $_ !~ m/\s*^%/)
+ {
+
+ # check if we're at the end of a verbatim-like environment
+ if($verbatimEnvironments{$1})
+ {
+ $inverbatim = 0;
+ # tracing mode
+
+ print $logfile "Line $lineCounter\t \\end{verbatim-like} found: $1, switching off verbatim \n" if($tracingMode);
+ print $logfile "Line $lineCounter\t removing leading spaces \n" if($tracingMode);
+ #s/^\ *//;
+ s/^\t+// if($_ ne "");
+ s/^\s+// if($_ ne "");
+ }
+
+ # check to see if \end{environment} fits with most recent \begin{...}
+ my $previousEnvironment = pop(@environmentStack);
+
+ # check to see if we need to turn off alignment
+ # delimiters and output the current block
+ if($lookForAlignDelims{$1} and ($previousEnvironment eq $1))
+ {
+ $delimiters=0;
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t Delimiter body FINISHED: $1\n" if($tracingMode);
+
+ # print the current FORMATTED block
+ @block = &format_block(@block);
+ foreach $line (@block)
+ {
+ # add the indentation and add the
+ # each line of the formatted block
+ # to the output
+ # unless this would only create trailing whitespace and the
+ # corresponding option is set
+ unless ($line =~ m/^$/ and $removeTrailingWhitespace)
+ {
+ $line = join("",@indent).$line;
+ }
+ push(@lines,$line);
+ }
+ # empty the @block, very important!
+ @block=();
+ }
+
+ # tracing mode
+ print $logfile "Line $lineCounter\t \\end{envrionment} found: $1 \n" if($tracingMode and !$verbatimEnvironments{$1});
+
+ # check to see if \end{environment} fits with most recent \begin{...}
+ if($previousEnvironment eq $1)
+ {
+ # decrease the indentation (if appropriate)
+ &decrease_indent($1);
+ }
+ else
+ {
+ # otherwise put the environment name back on the stack
+ push(@environmentStack,$previousEnvironment);
+ print $logfile "Line $lineCounter\t WARNING: \\end{$1} found on its own line, not matched to \\begin{$previousEnvironment}\n" unless ($delimiters or $inverbatim or $inIndentBlock or $1 eq "\\\]");
+ }
+
+ # need a special check for \[ and \]
+ if($1 eq "\\\]")
+ {
+ &decrease_indent($1);
+ pop(@environmentStack);
+ }
+
+ # if we're at the end of the document, we remove all current
+ # indentation- this is especially prominent in examples that
+ # have headings, and the user has chosen to indentAfterHeadings
+ if($1 eq "document" and !(grep(/filecontents/, @indentNames)) and !$inpreamble and !$delimiters and !$inverbatim and !$inIndentBlock)
+ {
+ @indent=();
+ @indentNames=();
+ print $logfile "Line $lineCounter\t \\end{$1} found- emptying indent array \n" unless ($delimiters or $inverbatim or $inIndentBlock or $1 eq "\\\]");
+ }
+ }
+}
+
+sub format_block{
+ # PURPOSE: Format a delimited environment such as the
+ # tabular or align environment that contains &
+ #
+ # INPUT: @block array containing unformatted block
+ # from, for example, align, or tabular
+ # OUTPUT: @formattedblock array containing FORMATTED block
+
+
+ # @block is the input
+ my @block=@_;
+
+ # tracing mode
+ print $logfile "\t\tFormatting alignment block\n" if($tracingMode);
+
+ # step the line counter back to the beginning of the block-
+ # it will be increased back to the end of the block in the
+ # loop later on: foreach $row (@tmpblock)
+ $lineCounter -= scalar(@block);
+
+
+ # local array variables
+ my @formattedblock;
+ my @tmprow=();
+ my @tmpblock=();
+ my @maxmstringsize=();
+ my @ampersandCount=();
+
+ # local scalar variables
+ my $alignrowcounter=-1;
+ my $aligncolcounter=-1;
+ my $tmpstring;
+ my $row;
+ my $column;
+ my $maxmcolstrlength;
+ my $i;
+ my $j;
+ my $fmtstring;
+ my $linebreak;
+ my $maxNumberAmpersands = 0;
+ my $currentNumberAmpersands;
+ my $trailingcomments;
+
+ # local hash table
+ my %stringsize=();
+
+ # loop through the block and count & per line- store the biggest
+ # NOTE: this needs to be done in its own block so that
+ # we can know what the maximum number of & in the block is
+ foreach $row (@block)
+ {
+ # delete trailing comments
+ $trailingcomments='';
+ if($row =~ m/((?<!\\)%.*$)/)
+ {
+ $row =~ s/((?<!\\)%.*)/%TC/;
+ $trailingcomments=$1;
+ }
+
+ # reset temporary counter
+ $currentNumberAmpersands=0;
+
+ # count & in current row (exclude \&)
+ $currentNumberAmpersands++ while ($row =~ /(?<!\\)&/g);
+
+ # store the ampersand count for future
+ push(@ampersandCount,$currentNumberAmpersands);
+
+ # overwrite maximum count if the temp count is higher
+ $maxNumberAmpersands = $currentNumberAmpersands if($currentNumberAmpersands > $maxNumberAmpersands );
+
+ # put trailing comments back on
+ if($trailingcomments)
+ {
+ $row =~ s/%TC/$trailingcomments/;
+ }
+ }
+
+ # tracing mode
+ print $logfile "\t\tmaximum number of & in any row: $maxNumberAmpersands\n" if($tracingMode);
+
+ # loop through the lines in the @block
+ foreach $row (@block)
+ {
+ # get the ampersand count
+ $currentNumberAmpersands = shift(@ampersandCount);
+
+ # increment row counter
+ $alignrowcounter++;
+
+ # clear the $linebreak variable
+ $linebreak='';
+
+ # check for line break \\
+ # and don't mess with a line that doesn't have the maximum
+ # number of &
+ if($row =~ m/\\\\/ and $currentNumberAmpersands==$maxNumberAmpersands )
+ {
+ # remove \\ and all characters that follow
+ # and put it back in later, once the measurement
+ # has been done
+ $row =~ s/(\\\\.*)//;
+ $linebreak = $1;
+ }
+
+ if($currentNumberAmpersands==$maxNumberAmpersands)
+ {
+
+ # remove trailing comments
+ $trailingcomments='';
+ if($row =~ m/((?<!\\)%.*$)/)
+ {
+ $row =~ s/((?<!\\)%.*)/%TC/;
+ $trailingcomments=$1;
+ }
+
+ # separate the row at each &, but not at \&
+ @tmprow = split(/(?<!\\)&/,$row);
+
+ # reset column counter
+ $aligncolcounter=-1;
+
+ # loop through each column element
+ # removing leading and trailing space
+ foreach $column (@tmprow)
+ {
+ # increment column counter
+ $aligncolcounter++;
+
+ # remove leading and trailing space from element
+ $column =~ s/^\s+//;
+ $column =~ s/\s+$//;
+
+ # assign string size to the array
+ $stringsize{$alignrowcounter.$aligncolcounter}=length($column);
+ if(length($column)==0)
+ {
+ $column=" ";
+ }
+
+ # put the row back together
+ if ($aligncolcounter ==0)
+ {
+ $tmpstring = $column;
+ }
+ else
+ {
+ $tmpstring .= "&".$column;
+ }
+ }
+
+
+ # put $linebreak back on the string, now that
+ # the measurement has been done
+ $tmpstring .= $linebreak;
+
+ # put trailing comments back on
+ if($trailingcomments)
+ {
+ $tmpstring =~ s/%TC/$trailingcomments/;
+ }
+
+ push(@tmpblock,$tmpstring);
+ }
+ else
+ {
+ # if there are no & then use the
+ # NOFORMATTING token
+ # remove leading space
+ s/^\s+//;
+ push(@tmpblock,$row."NOFORMATTING");
+ }
+ }
+
+ # calculate the maximum string size of each column
+ for($j=0;$j<=$aligncolcounter;$j++)
+ {
+ $maxmcolstrlength=0;
+ for($i=0; $i<=$alignrowcounter;$i++)
+ {
+ # make sure the stringsize is defined
+ if(defined $stringsize{$i.$j})
+ {
+ if ($stringsize{$i.$j}>$maxmcolstrlength)
+ {
+ $maxmcolstrlength = $stringsize{$i.$j};
+ }
+ }
+ }
+ push(@maxmstringsize,$maxmcolstrlength);
+ }
+
+ # README: printf( formatting, expression)
+ #
+ # formatting has the form %-50s & %-20s & %-19s
+ # (the numbers have been made up for example)
+ # the - symbols mean that each column should be left-aligned
+ # the numbers represent how wide each column is
+ # the s represents string
+ # the & needs to be inserted
+
+ # join up the maximum string lengths using "s %-"
+ $fmtstring = join("s & %-",@maxmstringsize);
+
+ # add an s to the end, and a newline
+ $fmtstring .= "s ";
+
+ # add %- to the beginning
+ $fmtstring = "%-".$fmtstring;
+
+ # process the @tmpblock of aligned material
+ foreach $row (@tmpblock)
+ {
+
+ $linebreak='';
+ # check for line break \\
+ if($row =~ m/\\\\/)
+ {
+ # remove \\ and all characters that follow
+ # and put it back in later
+ $row =~ s/(\\\\.*$)//;
+ $linebreak = $1;
+ }
+
+ if($row =~ m/NOFORMATTING/)
+ {
+ $row =~ s/NOFORMATTING//;
+ $tmpstring=$row;
+
+ # tracing mode
+ print $logfile "\t\tLine $lineCounter\t maximum number of & NOT found- not aligning delimiters \n" if($tracingMode);
+ }
+ else
+ {
+ # remove trailing comments
+ $trailingcomments='';
+ if($row =~ m/((?<!\\)%.*$)/)
+ {
+ $row =~ s/((?<!\\)%.*)/%TC/;
+ $trailingcomments=$1;
+ }
+
+ $tmpstring = sprintf($fmtstring,split(/(?<!\\)&/,$row)).$linebreak."\n";
+
+ # put trailing comments back on
+ if($trailingcomments)
+ {
+ $tmpstring =~ s/%TC/$trailingcomments/;
+ }
+
+ # tracing mode
+ print $logfile "\t\tLine $lineCounter\t Found maximum number of & so aligning delimiters\n" if($tracingMode);
+ }
+
+ # remove trailing whitespace
+ if ($removeTrailingWhitespace)
+ {
+ print $logfile "Line $lineCounter\t removing trailing whitespace from delimiter aligned line\n" if ($tracingMode);
+ $tmpstring =~ s/\s+$/\n/;
+ }
+
+ push(@formattedblock,$tmpstring);
+
+ # increase the line counter
+ $lineCounter++;
+ }
+
+ # return the formatted block
+ @formattedblock;
+}
+
+sub increase_indent{
+ # PURPOSE: Adjust the indentation
+ # of the current environment;
+ # check that it's not an environment
+ # that doesn't want indentation.
+
+ my $command = pop(@_);
+
+ # if the user has specified $indentRules{$command} and
+ # $noAdditionalIndent{$command} then they are a bit confused-
+ # we remove the $indentRules{$command} and assume that they
+ # want $noAdditionalIndent{$command}
+ if(scalar($indentRules{$command}) and $noAdditionalIndent{$command})
+ {
+ print $logfile "WARNING\n\t Line $lineCounter\t $command is in *both* indentRules and noAdditionalIndent\n";
+ print $logfile "\t\t\t ignoring indentRules and prioritizing noAdditionalIndent\n";
+ print $logfile "\t\t\t Note that you only get this message once per command/environment\n";
+
+ # remove the key and value from %indentRules hash
+ # to avoid any further confusion
+ delete $indentRules{$command};
+ }
+
+ # if the command is in verbatimEnvironments and in indentRules then
+ # remove it from %indentRules hash
+ # to avoid any further confusion
+ if($indentRules{$command} and $verbatimEnvironments{$command})
+ {
+ # remove the key and value from %indentRules hash
+ # to avoid any further confusion
+ print $logfile "WARNING\n\t Line $lineCounter\t $command is in *both* indentRules and verbatimEnvironments\n";
+ print $logfile "\t\t\t ignoring indentRules and prioritizing verbatimEnvironments\n";
+ print $logfile "\t\t\t Note that you only get this message once per environment\n";
+ delete $indentRules{$command};
+ }
+
+ if(scalar($indentRules{$command}))
+ {
+ # if there's a rule for indentation for this environment
+ push(@indent, $indentRules{$command});
+ # tracing mode
+ print $logfile "Line $lineCounter\t increasing indent using rule for $command (see indentRules)\n" if($tracingMode);
+ push(@indentNames,"$command (rule)");
+ }
+ else
+ {
+ # default indentation
+ if(!($noAdditionalIndent{$command} or $verbatimEnvironments{$command} or $inverbatim))
+ {
+ push(@indent, $defaultIndent);
+ push(@indentNames,"$command (default)");
+ # tracing mode
+ print $logfile "Line $lineCounter\t increasing indent using defaultIndent\n" if($tracingMode);
+ }
+ elsif($noAdditionalIndent{$command})
+ {
+ # tracing mode
+ print $logfile "Line $lineCounter\t no additional indent added for $command (see noAdditionalIndent)\n" if($tracingMode);
+ }
+ }
+}
+
+sub decrease_indent{
+ # PURPOSE: Adjust the indentation
+ # of the current environment;
+ # check that it's not an environment
+ # that doesn't want indentation.
+
+ my $command = pop(@_);
+
+ if(!($noAdditionalIndent{$command} or $verbatimEnvironments{$command} or $inverbatim))
+ {
+ pop(@indent);
+ pop(@indentNames);
+ # tracing mode
+ print $logfile "Line $lineCounter\t decreasing indent to: ",join(", ",@indentNames),"\n" if($tracingMode);
+ }
+}
+