foliono

git-svn-id: svn://tug.org/texlive/trunk@58877 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 1393 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/foliono/MANIFEST-Foliono.txt b/Master/texmf-dist/doc/latex/foliono/MANIFEST-Foliono.txt
new file mode 100644
index 00000000000..a955a2a757e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/MANIFEST-Foliono.txt
@@ -0,0 +1,30 @@
+Package: foliono
+Author: Tommi Syrjänen
+Version: 1.000
+Date: 25 III 2021
+
+Copyright (c) 2021 Tommi Syrjänen
+
+This work is released under the Latex Project Public License (LPPL)
+version 1.3c. See file lppl.txt for details.
+
+This work has the LPPL maintenance status "maintained".
+The Current Maintainer of this work is Tommi Syrjänen.
+This work consists of the files listed in this file. 
+
+1. The latex style file:
+- foliono.sty          - the latex style file
+
+2. Documentation files:
+- foliono.pdf          - the users' manual
+- README               - a short summary of the package
+
+3. Documentation source files:
+- foliono.tex          - LaTeX source for the manual
+- pics/standard.png    - image file for documentation
+- pics/skip-first.png  - image file for documentation
+- pics/only-folio.png  - image file for documentation
+- pics/only-quire.png  - image file for documentation
+
+4. License:
+- lppl.txt             - the Latex Project Public License
diff --git a/Master/texmf-dist/doc/latex/foliono/README b/Master/texmf-dist/doc/latex/foliono/README
new file mode 100644
index 00000000000..d716b80345d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/README
@@ -0,0 +1,24 @@
+Foliono is a package that replaces page numbering with medieval and
+early modern folio numbering.
+ 
+Folio numbering was used before modern page numbering convention came
+to use. In its basic form only every other page has a number and it
+has two parts: the quire number and the folio number inside the quire.
+A quire or a gathering is a collection of sheets that are bound into
+the book as one unit. For example, if a book has four-sheet quires,
+then each quire will have 16 modern pages and the folio 'B 1'
+corresponds to the modern page 17 and 'B 2' to page 19.
+
+The foliono package has direct support for several different folio
+numbering conventions that were used in books before the 19th century.
+The package works best in conjunction with fancyhdr and fontspec, but
+it can be used without them.
+
+
+This package is distributed under the Latex Project Public License
+(LPPL).
+
+-- 
+Tommi Syrjänen
+<tssyrjan@iki.fi>
+
diff --git a/Master/texmf-dist/doc/latex/foliono/foliono.pdf b/Master/texmf-dist/doc/latex/foliono/foliono.pdf
new file mode 100644
index 00000000000..104b0f0ff57
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/foliono.pdf
diff --git a/Master/texmf-dist/doc/latex/foliono/foliono.tex b/Master/texmf-dist/doc/latex/foliono/foliono.tex
new file mode 100644
index 00000000000..627406f7bbb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/foliono.tex
@@ -0,0 +1,923 @@
+%% missaali.tex
+%% Copyright 2021 Tommi Syrjänen 
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+% 
+% The Current Maintainer of this work is Tommi Syrjänen 
+%
+% See file MANIFEST-Foliono.txt to a list of files that make up this
+% work.
+\documentclass[a4paper, 12pt]{article}
+%% Author: Tommi Syrjänen (tssyrjan@iki.fi)
+%%
+%% This software is distributed under the LPPL license
+
+%% This is the documentation file for the foliono LaTeX package.
+\usepackage{fontspec}
+\usepackage{graphicx}
+
+\newcommand{\feature}[1]{\texttt{#1}}
+\newcommand{\command}[1]{\texttt{\textbackslash{}#1}}
+\newcommand{\commandone}[2]{\texttt{\textbackslash{}#1\{#2\}}}
+\newcommand{\commandtwo}[3]{\texttt{\textbackslash{}#1\{#2\}\{#3\}}}
+\newcommand{\argument}[1]{\texttt{#1}}
+
+\makeatletter
+
+\newcommand{\foliodemo}[2]{%
+  \setfoliono{#1}{#2}%
+  \currentfoliowithstyles% 
+}
+
+\makeatother
+
+
+
+\title{The \texttt{foliono} package \\
+  Folio numbering for old books}
+
+\author{Tommi Syrjänen\\ \texttt{tssyrjan@iki.fi}}
+\date{Version 1.0, 25 March, 2021}
+
+\usepackage{foliono}
+
+
+% Define the folionumber font. This font is available in the package
+% 'missaali'
+\folionofont{Missaali}
+\folionofontsize{14}
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+  The \texttt{foliono} package implements medieval and early modern
+  folio numbering with a few customizable options. In folio numbering
+  only every other page gets a number and the number has two parts
+  that identify both the quire and the folio inside of the quire. The
+  package works best in conjunction with the \texttt{fancyhdr} package
+  but it can be used also without it. 
+\end{abstract}
+
+\section{Introduction}
+
+Before modern page numbering was introduced, the pages of a book were
+numbered using \emph{folio numbering}. In this context \emph{folio}
+means a single leaf of a page, an odd page and the even page that is
+on the other side of. 
+
+A medieval book was composed of \emph{quires}. A quire is a collection
+of sheets of paper or parchment that are folded together to form
+pages. As the name suggests, most quires had four sheets that were
+folded to form eight folios and 16 pages, but there were also three,
+five, and even six sheet quires. With printed books the modern term
+\emph{gathering} is usually used in place of \emph{quire}, but I have
+used \emph{quire} throughout because it is shorter.
+
+A medieval scribe would write the text on quires and then a bookbinder
+would sew the completed quires together and attach the book covers.
+Most texts needed more than one quire. Scribes started to number the
+quires to help bookbinders to keep the quires in order. They were
+usually marked by writing letters in alphabetical order at the bottom
+or top right corner of the first page of the quire.
+
+\begin{figure}
+  \centering
+\begin{verbatim}
+\usepackage{foliono}
+\usepackage{fancyhdr}
+\pagestyle{fancy}
+\cfoot{}
+\renewcommand{\headrulewidth}{0pt} 
+\fancyfoot[R]{\folionumber}
+\end{verbatim}
+  \caption{Quick-start minimal code skeleton with \feature{fancyhdr}.}
+  \label{fig:quick_start}
+\end{figure}
+
+
+Later scribes started to add numbers for the individual folios of a
+quire. This was usually done for books that needed a table of contents
+or an index. Folio numbering became more prevalent with the advent of
+printing as including them helped the bookbinder to ensure that the
+sheets were folded right and put in the correct order.
+
+For printed books the quires are formed using two basic principles.
+The largest book format is called \emph{folio} and there the sheet is
+folded once so that the result has two folios and four pages. These
+sheets are collected in quires the same ways as manuscript sheets
+were. In late medieval and early modern times the number of sheets put
+in a quire varied also for printed books. I have seen examples ranging
+from three sheets (6 folios) to six sheets (12 folios), with five
+sheets (10 folios) being very common.
+
+In smaller format books one printed sheet usually makes up a quire by
+itself. In \emph{quarto} size the sheet is folded twice, so a quire
+will have only four folios, in \emph{octavo} it is folded three times
+so there are eight folios per quire, and in \emph{duodecimo} sheets
+are folded four times to produce 12 folios.
+
+\begin{table}[b]
+  \centering
+  \begin{tabular}{lcc}
+    Format & Folios per quire & Pages per quire \\
+    \hline
+    Folio (2:o) &  6-12 & 12-24 \\ 
+    Quarto (4:o) & 4 & 8 \\
+    Octavo (8:o) & 8 & 16 \\
+    Duodecimo (12:o) & 12 & 24 \\
+  \end{tabular}
+  \caption{Common old printed book formats}
+  \label{fig:formats}
+\end{table}
+
+A medieval or early modern folio number generally consists of two
+parts, the quire number (A, B) and the folio number within quire in
+Roman numerals (i, ii). There are some examples where the folios are
+numbered sequentially from the start with no respect to the quire
+structure. In many of these cases the folio numbers were added after
+the book had already been bound.
+
+In modern reference convention the
+two pages of a folio are called \emph{recto} (r) and \emph{verso} (v).
+The recto is the first page of the folio that is shown on the right
+hand side of the spread and the verso is the second page on the left
+hand side.
+
+Bookprinters often did not include the folio number for each folio of
+the quire. For example, with the \emph{folio} and \emph{octavo}
+formats it was common that only the folios of the first half of a
+quire had numbers. Similarly, with \emph{quarto} the last folio number
+of a quire was often left out.
+
+The \feature{foliono} package supports several different folio
+numbering conventions and it also provides very rudimentary support
+for creating tables of content and indices for folio-numbered
+documents. However, a lot of manual work is necessary for creating
+them. 
+
+\begin{figure}
+  \centering
+  \begin{tabular}{cc}
+    \includegraphics[width=5cm]{pics/standard.png} & 
+    \includegraphics[width=5cm]{pics/skip-first.png} \\
+    (a) Default & (b) \feature{SkipFirst} \\
+    \includegraphics[width=5cm]{pics/only-quire.png} & 
+    \includegraphics[width=5cm]{pics/only-folio} \\
+    (c) \feature{OnlyQuire} & (d) \feature{NoQuires} \\
+  \end{tabular}
+  \caption{Mode of operation samples}
+  \label{fig:modes}
+\end{figure}
+
+In the examples I will be using the font \emph{Missaali} to typeset
+the folio numbers as they would appear on the page. \emph{Missaali} is
+a free opentype font that comes with the package \feature{missaali}
+that is based on late 15th century book Northern German book textura. 
+
+\section{Modes of operation}
+ 
+The \feature{foliono} package can operate in several different modes
+that are controlled using the package options. A folio number consists
+of two parts, the quire number and the folio number, and the different
+modes show them using different principles. Figure \ref{fig:modes}
+shows four of the basic modes in schematics. 
+
+\begin{description}
+\item [Default] \mbox{} \\
+  The default behavior of \emph{foliono} is that each folio is
+  numbered with both the quire number and the folio number inside a
+  quire. Thus, the folio numbers advance like:
+  \begin{center}
+    A 1, A 2, \textellipsis, A 8, B 1, B 2, \textellipsis, B 8, C 1, \textellipsis
+  \end{center}
+  
+\item [Skip first folio number (\feature{SkipFirst})] \mbox{} \\
+  The first folio number skipping mode is otherwise the same as the
+  default mode, but the first folio of a quire contains only the quire
+  number and not the folio counter. The numbers advance like:
+  \begin{center}
+    A, A 2, A 3, \textellipsis, A 8, B, B 2, \textellipsis, C , C 2 \textellipsis
+  \end{center}
+
+
+  
+\item [Only quire numbers (\feature{OnlyQuire})] \mbox{}\\
+  In the only quire numbers mode the folio numbers are not included
+  at all and only the first pages of a quire have the mark:
+  \begin{center}
+    A, \{\}, \{\}, \{\}, \{\}, \{\}, \{\}, \{\}, B, \{\}, \textellipsis
+  \end{center}
+  
+\item [No quires (\feature{NoQuires})]\mbox{} \\
+  In this mode the folios are numbered sequentially from the start of
+  the book paying no regards to the quire structure. Here the numbers
+  are simply:
+  \begin{center}
+    1, 2, 3, 4, 5, \textellipsis
+  \end{center}
+
+\item [Sheet numbering (\feature{SheetNumbering})] \mbox{}\\
+  In sheet numbering mode there is only one folio number per a two
+  page sheet. In practice, this means that the first half folios of a
+  quire are numbered using the default style and the latter half are
+  left unnumbered:
+  \begin{center}
+    A 1, A 2, A 3, A 4, \{\}, \{\}, \{\}, \{\}, B 1, B 2, \textellipsis
+  \end{center}
+  This mode can be combined with skipping the first folio number. 
+
+
+\item [Skip end half (\feature{SkipEnd})] \mbox{} \\
+  In this mode the folio numbers are printed to the first half + 1
+  folios of a quire and the rest are left empty. In practice the
+  effect is otherwise same as with sheet numbering except that one
+  more folio has a number.
+
+  For quarto format the numbers go:
+  \begin{center}
+    A 1, A 2, A 3,  \{\}, B 1, B 2, \textellipsis
+  \end{center}
+  For octavo format the numbers are:
+  \begin{center}
+    A 1, A 2, \textellipsis, A 5,  \{\},  \{\},  \{\}, B 1, B 2, \textellipsis
+  \end{center}
+  For duodecimo they go:
+  \begin{center}
+    A 1, A 2, \textellipsis, A 7,  \{\},  \{\},  \{\}, \{\}, \{\}, B 1, B 2, \textellipsis
+  \end{center}
+  This mode can be combined with skipping the first folio number.   
+
+\end{description}
+
+\section{General usage}
+
+The basic command in the package is \command{folionumber}. This should
+be put either in the header or footer of the page and it should be run
+exactly once on each page since it keeps track of the folio number
+counters and also whether we are on recto or verso side of the folio.
+Manipulating headers and footers is simplest with the
+\feature{fancyhdr} package. For the basic functionality you can add
+the following to the preamble of the document:
+
+\begin{verbatim}
+\usepackage{fancyhdr}
+\usepackage{foliono}
+\cfoot{}
+\renewcommand{\headrulewidth}{0pt}
+\fancyfoot[R]{\folionumber}
+\pagestyle{fancy}
+\end{verbatim}
+
+Here the \command{cfoot} removes the modern page number,
+\command{fancyfoot} adds the folio number to the right footer,
+overriding the \command{headrulewidth} removes the horizontal line
+from top that \feature{fancyhdr} wants to add there, and
+\command{pagestyle} enables the fancy header style.
+
+You need to decide how big your quires are. The package defaults to
+eight folio quires, meaning that when printed there are four sheets in
+the quire. Historically that was the most common quire size for
+manuscripts, but other sizes were also used. You can set the quire
+size with the \command{folionoquirefolios} command. For example:
+\begin{verbatim}
+\folionoquirefolios{10}
+\end{verbatim}
+sets the quires to have 10 folios and 20 pages each. It is possible to
+change the value in the middle of the document to get quires of
+different sizes. 
+
+In case you need to set the folio number manually, there are two ways
+to do it:
+
+\begin{enumerate}
+\item \command{stepfolio}: this moves the counters to the next folio.
+\item \commandtwo{setfoliono}{quireNo}{folioNo}: sets the quire
+  counter to \argument{quireNo} and the folio counter to
+  \argument{folioNo}. 
+\end{enumerate}
+
+There are three commands that you can use to access the current folio
+number from text. All of these commands set the folio number even if
+\command{folionumber} does not print it on the page.
+\begin{enumerate}
+\item \command{currentfolio} this sets the current folio number as
+  unformatted string. 
+
+\item \command{currentfoliowithsides} this sets the current folio
+  number as unformatted string that is followed by the side reference
+  \feature{r} or \feature{v}. 
+
+\item \command{currentfoliowithstyles} this sets the current folio
+  number formatted and styled the exact same way as it is  
+
+\end{enumerate}
+
+Here is an example for their use:
+
+\begin{center}
+\begin{tabular}{lc}
+    \begin{minipage}{0.5\linewidth}
+\begin{verbatim}
+\setfoliono{2}{4}
+1: \currentfolio \\
+2: \currentfoliowithsides \\
+3: \currentfoliowithstyles \\
+\end{verbatim}
+    \end{minipage}
+&
+    \begin{minipage}{0.4\linewidth}
+      \setfoliono{3}{4}\strut\mbox{}\\
+      \strut\mbox{}\\
+      1: \currentfolio \\
+      2: \currentfoliowithsides \\
+      3: \currentfoliowithstyles \\
+      \end{minipage}
+  \end{tabular}
+\end{center}
+
+\subsection{Font selection and properties}
+
+By default the folio numbers are set using the default document font
+and size. There are commands that allow you to select the font when
+using the \feature{fontspec} package. If you are using some other
+environment, you can redefine the \command{folionostyle} command that
+adds style to the folio numbers.
+
+The font selection commands are:
+\begin{enumerate}
+\item \commandone{folionofont}{FontName}: set the \feature{fontspec}
+  font that is used to set the folio number. You need to set this for
+  the other two font setting commands having effect.
+
+\item \commandone{folionofontsize}{size}: set the size of the folio
+  number. The font must have been set eariler. 
+
+\item \commandone{folionofontcolor}{color}: set the color for the
+  folio number. The font must have been set eariler.
+
+\end{enumerate}
+
+\begin{center}
+  \begin{tabular}{lc}
+    \begin{minipage}{0.6\linewidth}
+\begin{verbatim}
+Before: \currentfoliowithstyles \\
+\folionofont{Missaali}
+\folionofontsize{18}
+\folionofontcolor{c55e47}
+After: \currentfoliowithstyles 
+\end{verbatim}
+    \end{minipage}
+    &
+    \begin{minipage}{0.3\linewidth}
+      \begingroup
+      Before: \currentfoliowithstyles \\
+      \folionofont{Missaali}
+      \folionofontsize{18}
+      \folionofontcolor{c55e47}
+      After: \currentfoliowithstyles 
+      \folionofontsize{14}
+      \folionofontcolor{000000}
+      \endgroup
+    \end{minipage}
+  \end{tabular}
+\end{center}
+
+\subsection{Controlling the formatting}
+
+By default the folio number is typeset with a space between the quire
+and folio numbers. There are commands to add content or commands
+before and after the both commands as well as to override the default
+separator. 
+
+\begin{enumerate}
+\item \commandone{quirenoprefix}{text}: the \emph{text} is added
+  before the quire number.
+\item \commandone{quirenosuffix}{text}: the \emph{text} is added
+  after the quire number.
+\item \commandone{folionoprefix}{text}: the \emph{text} is added
+  before the folio number.
+\item \commandone{folionosuffix}{text}: the \emph{text} is added
+  after the folio number.
+\item \commandone{folionoseparator}{text}: the \emph{text} is added
+  between the quire and folio numbers. 
+\end{enumerate}
+
+\begin{figure}
+  \centering
+\begin{verbatim}
+\quirenostyle{%
+  \quirenoprefix%
+  QUIRE COUNTER%
+  \quirenosuffix%
+  \folionoseparator}%
+\folionostyle{%
+  \folionoprefix%
+  FOLIO COUNTER%
+  \folionosuffix%
+}
+\end{verbatim}
+  \caption{A pseudocode explanation on how the quire number is
+    formatted. The separator is formatted using the quire number
+    style.}
+  \label{fig:foliono}
+\end{figure}
+For example, you can add periods before, after, and in the middle of
+the folio number with:
+\begin{center}
+  \begin{tabular}{lc}
+    \begin{minipage}{0.6\linewidth}
+\begin{verbatim}
+\quirenoprefix{.}
+\folionoseparator{.}
+\folionosuffix{.}
+\currentfoliowithstyles
+\end{verbatim}
+    \end{minipage}
+    &
+    \begin{minipage}{0.3\linewidth}
+       \quirenoprefix{.}
+       \folionoseparator{.}
+       \folionosuffix{.}
+       \currentfoliowithstyles
+       \quirenoprefix{}
+       \folionosuffix{}
+       \folionoseparator{\hbox{ }}
+    \end{minipage}
+  \end{tabular}
+\end{center}
+
+You can also add formatting commands to the prefixes. For example, you
+can achieve two-colored folio numbers with:
+\begin{verbatim}
+\quirenoprefix{\addfontfeature{Color=455f9b}}
+\folionoprefix{\addfontfeature{Color=c55e47}}
+\currentfoliowithstyles
+\end{verbatim}
+This produces the result:
+\begin{center}
+  \begin{minipage}{0.3\linewidth}
+    \quirenoprefix{\addfontfeature{Color=455f9b}}
+    \folionoprefix{\addfontfeature{Color=c55e47}}
+    \currentfoliowithstyles
+    \quirenoprefix{}
+    \folionoprefix{}
+    \end{minipage}
+\end{center}
+
+\subsection{Labels and indices}
+
+There are two commands for creating labels that have folio numbers for
+the reference and two commands for creating index entries. The basic
+forms of the commands typeset the folio numbers without formatting or
+prefixes and suffixes, and the two others typeset the numbers as they
+appear on page. All of these commands produce the folio number string
+even if it is not printed on the current page. Note that commands that
+are read in from auxiliary and index files break easily and often
+cause weird error messages.
+
+If you want to create a medieval-styled table of contents, the best
+way to proceed is probably to use the indexing commands, copy the
+index file as a base for a new LaTeX document, and then manipulate
+them by hand to get the desired outcome. You can then combine the
+original document and the index using the \feature{pdfpages} package.
+There are two main reasons to do it this way: as far as I know there
+are no existing index formats that would produce results that are even
+remotely close to medieval tables of contents or indices, and the main
+text should start on the folio A 1 of the document. If the table of
+contents is at the beginning, it should be on a separate unnumbered
+sheet.
+
+\begin{enumerate}
+\item \commandone{folionolabel}{label}: defines a label whose
+  reference string is unformatted version of the current folio number.
+
+\item \commandone{folionolabelwithstyles}{label}: defines a label
+  whose reference string is the formatted version of the current folio
+  number.
+
+\item \commandone{folionoindex}{text}: adds \feature{text} as an index
+  entry in the index file.\footnote{Remember to use
+    \command{makeindex} command in the preamble if you use index
+    commands.}
+
+\item \commandone{folionoindexwithstyles}{text}: adds \feature{text}
+  as an index entry in the index file with complete styling.
+
+\end{enumerate}
+
+
+
+
+
+
+
+
+\section{Package options}
+
+The \feature{foliono} package defines the following options:
+
+\begin{description}
+\item [\feature{AllQuires}] \mbox{} \\
+  Before the 17th century the letters \emph{i} and \emph{j} were not
+  yet separated and they were considered to be two variant forms of
+  the same letter that could be used almost interchangeably.
+  Similarly, \emph{u} and \emph{v} were still the same. Because of
+  this \feature{foliono} does not use \emph{i} and \emph{u} as quire
+  numbers by default. The package option \feature{AllQuires} takes the
+  two missing letters in use as quire numbers.
+
+\item [\feature{ArabicNumbers}] \mbox{} \\
+  This option changes the folio numbers into Arabic numerals instead
+  of the Roman numberals. This is most useful together with the
+  \feature{NoQuires} option. However, some later printed books used
+  Arabic numerals in folio numbers.
+  
+  \item [\feature{LowerCase}] \mbox{} \\
+    This changes the quire numbers to be in lower case instead of the
+    default upper case letters. 
+    
+  \item [\feature{NoQuires}] \mbox{} \\
+    This turns on the no quires mode where folio numbers are numbered
+    sequentially from one upwards with no regard to quire structure. 
+
+  \item [\feature{OnlyQuire}] \mbox{} \\
+    This turns on the only quires mode where folio numbers are left out
+    and the quires have a quire number on their first page. 
+  
+  \item [\feature{SheetNumbers}] \mbox{} \\
+    This turns on sheet numbering mode where there is only one folio
+    number on a two-folio sheet of paper. In practice the first half
+    of folios on a quire will have a number and the rest are empty.
+    This does not work together with \feature{NoQuires}.
+
+  \item [\feature{ShowSides}] \mbox{} \\
+    If enabled, it will add the indicator \emph{r} or \emph{v} to
+    labels and index entries to show if they land on recto or verso
+    side of the folio. This is not added to the folio numbers printed
+    on pages, only on the references. 
+
+  \item [\feature{SkipFirst}] \mbox{} \\
+    When enabled the first folio of a quire will have only the quire
+    number and not the folio number. 
+
+
+  \item [\feature{SkipEnd}] \mbox{} \\
+    When enabled the folio numbers are printed on first half + 1
+    folios of a quire. The effect is otherwise the same as with
+    \feature{SheetNumbers} except that one more folio has the number.
+\end{description}
+
+\section{Command Reference}
+
+
+\begin{description}
+\item [\command{folionumber}] \mbox{} \\
+  Sets both the formatted and styled folio number to the page and it
+  also keeps track of the quire and folio counters as well as the
+  recto and verso sides on the document. It should be run exactly once
+  per page of output.
+
+\item [\commandone{folionoquirefolios}{folioNo}] \mbox{} \\
+  Sets the size of quires to \argument{folioNo} folios.
+  The value should be even. This can be run multiple times inside a
+  document to get quires of different sizes.
+
+\item [\commandone{folionofont}{fontId}] \mbox{} \\
+  Sets the font that is used to folio numbers to the
+  \feature{fontspec} font \argument{fontId}. If you are using some
+  other font system, you need to redefine \command{folionostyle} and
+  \command{quirenostyle} instead.
+  
+\item [\commandone{folionofontsize}{points}] \mbox{} \\
+  Sets the size of the folio number font to \argument{points}. This
+  has an effect only if the font has been selected with
+  \command{folionofont}. Default size is 10 points. 
+
+\item [\commandone{folionofontcolor}{color}] \mbox{} \\
+  Sets the folio number font color to \argument{color}. This has an
+  effect only if the font has been selected with
+  \command{folionofont}. Default color is black. 
+
+\item [\commandone{quirenostyle}{commands}] \mbox{} \\
+  A styling command for non-\feature{fontspec} users. Redefine this
+  command to apply styling to the quire counter. This defaults to
+  using the font, size, and color set using the previous font
+  selection commands.
+
+\item [\commandone{folionostyle}{commands}] \mbox{} \\
+  A styling command for non-\feature{fontspec} users. Redefine this to
+  apply styling to the folio counter. This defaults to using the font,
+  size, and color set using the previous font selection commands.
+
+\item [\commandone{folionolabel}{label}] \mbox{} \\
+  Adds a \argument{label} that can be accessed with the \command{ref}
+  command. The label text will be an unformatted folio number string.
+  This creates a reference using the folio number of that particular
+  page even if the number is not printed on the page. This has the
+  most obvious effect when the \feature{SheetNumbers} option is turned
+  on.
+
+\item [\commandone{folionolabelwithstyles}{label}] \mbox{} \\
+  Adds a \argument{label} whose reference text contains all the styles
+  and formatting of the current folio number. Otherwise this works the
+  same as \command{folionolabel}. \emph{Note! It is very easy to get
+    weird TeX error messages if there is anything complex or fragile
+    in the commands read from .aux files}.
+
+\item [\commandone{folionoindex}{text}] \mbox{} \\
+  This adds \argument{text} as an index entry where the page number is
+  replaced with unformatted current folio number. Using this command
+  and some manual manipulation is the easiest way to create medieval
+  tables of context. 
+
+\item [\commandone{folionoindexwithstyles}{text}] \mbox{} \\
+  This adds \argument{text} as an index entry where the page number is
+  replaced with styled current folio number. 
+
+\item [\commandtwo{setfoliono}{quireNo}{folioNo}] \mbox{} \\
+  Sets the quire counter to \argument{quireNo} and the folio counter
+  to \argument{folioNo}.
+
+\item [\command{stepfolio}] \mbox{} \\
+  Moves the folio number to the next folio. This is most useful in
+  cases you want to remove the folio number from a single page as
+  setting the page style to \argument{empty} also prevents
+  \command{folionumber} from moving to the next number.
+
+\item [\commandone{quirenoprefix}{text}] \mbox{} \\
+  Sets a prefix of the quire number to be \argument{text}. The prefix
+  can contain formatting commands, but the more complex the commands
+  are, the more likely is that \command{folionolabelwithstyles} and
+  \command{folionoindexwithstyles} commands break. 
+
+\item [\commandone{quirenosuffix}{text}] \mbox{} \\
+  Sets the quire number suffix to \argument{text}. The suffix may
+  contain both text and commands.
+
+\item [\commandone{folionoprefix}{text}] \mbox{} \\
+  Sets the folio counter prefix to \argument{text}. 
+
+\item [\commandone{folionosuffix}{text}] \mbox{} \\
+  Sets the folio number suffix to \argument{text}. 
+
+\item [\commandone{folionoseparator}{text}] \mbox{} \\
+  Sets the separator that is placed between quire and folio numbers to
+  \argument{text}. The separator is formatted according to the quire
+  number style. 
+
+\item [\command{currentfolio}] \mbox{} \\
+  Gives the unformatted and non-styled version of the current folio
+  number. In particular, the prefixes, suffixes, and the separator are
+  left out of it.
+
+\item [\command{currentfoliowithsides}] \mbox{} \\
+  Gives the unformatted and non-styled version of the current folio
+  number with the side indicator (\emph{r} or \emph{v}) added to its
+  end.
+
+\item [\command{currentfoliowithstyles}] \mbox{} \\
+  Gives the current folio number formatted the same way as it is added
+  to the page by \command{folionumber}. This gives the real folio
+  number even if \command{folionumber} will skip it, for example, if
+  we are in the second half of a quire and \feature{SheetNumbers} is
+  turned on.
+
+
+\end{description}
+
+\section{Examples}
+
+\begin{description}
+  
+\item [Codex Montpellier, c.1300] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & unknown \\
+    Format: & manuscript \\
+    Folio numbers: & continuously running folio numbers, roman numbers
+    surrounded by centered dots.  \\
+    Sample: &
+    \begin{minipage}{7cm}
+      \makeatletter
+      \FolioNo@noQuirestrue
+      \folionoprefix{·}
+      \folionosuffix{·}
+      \folionoseparator{}
+      \foliono@createFormattedFolioLabel      
+      \folionoprefix{}
+      \folionosuffix{}
+      \folionoseparator{\hbox{ }}
+      \makeatother
+    \end{minipage} \\
+  \end{tabular}
+
+  Code:
+
+  \begin{minipage}{5cm}
+    \verb!\usepackage[NoQuires]{foliono}!\\
+    \verb!\folionoprefix{·}! \\
+    \verb!\folionosuffix{·}! \\
+  \end{minipage}
+  
+
+\item [Glogauer Liederbuch, c. 1480] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & unknown \\
+    Format: & manuscript \\
+    Folios: & 12 per quire \\
+    Folio numbers: & on top right of every folio, most quires have
+    lower case quire numbers but some use upper case \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \makeatletter
+      \Foliono@capitalizeQuireNumberfalse
+      \foliono@createFormattedFolioLabel      
+      \makeatother
+    \end{minipage} \\
+  \end{tabular}
+
+  Code: 
+
+  \begin{minipage}{5cm}
+    \verb!\usepackage[LowerCase]{foliono}!\\
+    \verb!\folionoquirefolios{12}!\\
+  \end{minipage}
+
+\item [Missale Aboense, 1488] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Bookprinter: & Barthomolew Ghotan \\
+    Format: & folio \\
+    Folios: & 12 per quire \\
+    Folio numbers: & on every folio, capital quire number, centered dots surround  folio number \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \folionoprefix{·}
+      \folionosuffix{·}
+      \folionoseparator{}
+      \currentfoliowithstyles
+      \folionoprefix{}
+      \folionosuffix{·}
+      \folionoseparator{\hbox{ }}
+    \end{minipage} \\
+  \end{tabular}
+
+  Code:
+
+  \begin{minipage}{5cm}
+    \verb!\usepackage{foliono}!\\
+    \verb!\folionoquirefolios{12}!\\
+    \verb!\folionoprefix{·}! \\
+    \verb!\folionosuffix{·}! \\
+    \verb!\folionoseparator{}!
+  \end{minipage}
+
+  
+\item [Revelationes Sancti Birgitte, 1492] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Bookprinter: & Barthomolew Ghotan \\
+    Format: & folio \\
+    Folios: & 10 per quire \\
+    Folio numbers: & on first half of a quire, lower case quire number, periods surround  folio number \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \makeatletter
+      \Foliono@capitalizeQuireNumberfalse
+      \makeatother
+      \folionoprefix{.}
+      \folionosuffix{.}
+      \folionoseparator{}
+      \currentfoliowithstyles
+      \folionoprefix{}
+      \folionosuffix{}
+      \folionoseparator{\hbox{ }}
+    \end{minipage} 
+  \end{tabular}  
+
+Code:
+
+\begin{minipage}{5cm}
+  \verb!\usepackage[LowerCase,SheetNumbers]{foliono}!\\
+  \verb!\folionoquirefolios{10}!\\
+  \verb!\folionoprefix{.}! \\
+  \verb!\folionosuffix{.}! \\
+  \verb!\folionoseparator{}!
+\end{minipage}
+
+\item[Messu eli Herran Echtolinen, 1549] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & Mikael Agricola \\
+    Format: & quarto \\
+    Folios: & 8 per quire \\
+    Folio numbers: & first folio of a quire has only quire number,
+    quire numbers are capitalized. \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \currentfoliowithstyles
+    \end{minipage} 
+  \end{tabular}  
+
+Code:
+
+\begin{minipage}{5cm}
+  \verb!\usepackage[SkipFirst]{foliono}!\\
+  \verb!\folionoquirefolios{8}!\\
+\end{minipage}
+
+\item[Historiae animalum, 1551] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & Conrad Gessner \\
+    Format: & folio \\
+    Folios: & 6 or 8 per quire \\
+    Folio numbers: & quire numbers are set in Roman typeface, most are
+    upper case but preface uses lower case, folio
+    numbers with arabic numbers, only one folio number per sheet.
+    \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \makeatletter
+      \def\quirenostyle{}
+      \def\folionostyle{}
+      \FolioNo@useSheetNumberingtrue
+      \FolioNo@UseArabicNumberstrue
+      \setfoliono{3}{2}
+      \makeatother
+      \currentfoliowithstyles
+    \end{minipage} 
+  \end{tabular}  
+
+  Code: 
+
+\begin{minipage}{5cm}
+  \verb!\usepackage[SheetNumbers,ArabicNumbers]{foliono}!\\
+  \verb!\folionoquirefolios{6}!\\
+\end{minipage}
+
+
+
+\item[Wanhain Suomen maan Pijspain Latinan kielised laulud, 1616] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & Hemminki Maskulainen \\
+    Format: & octavo \\
+    Folios: & 8 per quire \\
+    Folio numbers: & folio numbers on first five folios of a quire,
+    the first folio has just the quire number, quire number in upper
+    case.  \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \makeatletter
+      \setfoliono{3}{4}
+      \FolioNo@skipFirstFolioNumbertrue
+      \FolioNo@onlyFirstHalftrue
+      \makeatother
+      \currentfoliowithstyles
+    \end{minipage} 
+  \end{tabular}  
+
+Code:
+
+\begin{minipage}{5cm}
+  \verb!\usepackage[SkipFirst,SkipEnd]{foliono}!\\
+  \verb!\folionoquirefolios{8}!\\
+\end{minipage}
+
+
+\item[Somen Kielinen Catechismus, 1628] \mbox{} \\
+  \begin{tabular}{lp{7cm}}
+    Author: & Martin Luther \\
+    Translator: &  Knut Carelius \\
+    Format: & quarto \\
+    Folios: & 4 per quire \\
+    Folio numbers: & first folio of a quire has only quire number,
+    last folio of a quire is without number, 
+    quire numbers are capitalized. \\
+    Sample: &
+    \begin{minipage}{6cm}
+      \currentfoliowithstyles
+    \end{minipage} 
+  \end{tabular}  
+
+Code:
+
+\begin{minipage}{5cm}
+  \verb!\usepackage[SkipFirst,SkipEnd]{foliono}!\\
+  \verb!\folionoquirefolios{4}!\\
+\end{minipage}
+
+
+\end{description}
+
+
+
+
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/foliono/lppl.txt b/Master/texmf-dist/doc/latex/foliono/lppl.txt
new file mode 100644
index 00000000000..90e5e3ab797
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/lppl.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2006-05-20
+
+Copyright 1999 2002-2006 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/foliono/pics/only-folio.png b/Master/texmf-dist/doc/latex/foliono/pics/only-folio.png
new file mode 100644
index 00000000000..1b85e4debda
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/pics/only-folio.png
diff --git a/Master/texmf-dist/doc/latex/foliono/pics/only-quire.png b/Master/texmf-dist/doc/latex/foliono/pics/only-quire.png
new file mode 100644
index 00000000000..10d07ffdfeb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/pics/only-quire.png
diff --git a/Master/texmf-dist/doc/latex/foliono/pics/skip-first.png b/Master/texmf-dist/doc/latex/foliono/pics/skip-first.png
new file mode 100644
index 00000000000..778bec094eb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/pics/skip-first.png
diff --git a/Master/texmf-dist/doc/latex/foliono/pics/standard.png b/Master/texmf-dist/doc/latex/foliono/pics/standard.png
new file mode 100644
index 00000000000..798655e013b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/foliono/pics/standard.png