doc 4

git-svn-id: svn://tug.org/texlive/trunk@80 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 4607 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/lineno/CHANGES.txt b/Master/texmf-dist/doc/latex/lineno/CHANGES.txt
new file mode 100644
index 00000000000..b8e2ea69241
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/CHANGES.txt
@@ -0,0 +1,148 @@
+CHANGES  for lineno.sty v4.4  2005/10/27: 
+
+1. Proper effective line depth at end of paragraphs. 
+   The spacing bug was quite obvious in two-column mode 
+   when a paragraph end was at a column bottom. 
+
+2. Another bug concerning two-column mode that had been 
+   introduced in v4.22 has been removed again. 
+
+3. Support for \addvspace introduced more and more bugs 
+   in versions of v4.32 and v4.33. The reasons seem to 
+   be clear now, and v4.4 should be stable. 
+
+
+CHANGES  for lineno.sty v4.32  2005/10/17: 
+
+1. Support for \addvspace 
+   (a math display or a list meets a heading -- or a sub-heading 
+   follows a heading -- or the like) 
+
+2. Clearly explained former option `displaymath' and its change 
+   to a default. 
+
+
+CHANGES  for lineno.sty v4.31  2005/10/01: 
+
+1. \modulolinenumbers* and a package option `modulo*' for 
+   printing first line number after interrupting editor's 
+   text, regardless of the modulo. 
+
+2. Improved explanation of \firstlinenumber and package 
+   options. 
+
+
+CHANGES  for lineno.sty v4.3  2005/05/16: 
+
+1. Option `displaymath' (proper numbering at paragraphs 
+   containing math displays) becomes default. 
+
+2. Compatibility with hyperref now indeed (at least much more). 
+
+3. Tidied up documentation: terrible confusion of \newcounter 
+   vs. \stepcounter; sections on the same matter written at 
+   different times; ... 
+
+4. Additional internal improvements that perhaps hardly are 
+   observable (no more spurious linenumbers in math displays 
+   from vertical mode; some compatibity with packages that use 
+   \holdinginserts; \linelabel in headings etc.). 
+
+
+CHANGES  for lineno.sty v4.22 2005/05/09: 
+
+1. Restored "global" version of numbering lines of a \parbox or 
+   minipage or ... (I had missed and disabled this in taking 
+   over lineno.sty), explained in documentation (lineno.pdf/dvi 
+   subsec. 7.2). 
+
+2. Enabled \flushbottom in two-column pagewise or switching 
+   mode. 
+
+3. Re-implemented modulo mode -- disabling certain users' tricks 
+   see lineno.pdf sec. 5.5, also for a still supported 
+   substituting trick. 
+
+4. Tidied up setting the next line number globally vs. locally 
+   (TeXbook p. 301). 
+
+5. Tidied up discussions (in documentation) of possible changes 
+   in implementation. 
+
+
+CHANGES  for lineno.sty v4.21 2005/04/28: 
+
+Removed serious flaws with math display, + something ... 
+
+
+CHANGES  for lineno.sty v4.2 2005/04/26: 
+
+1. Re-enabled package option `displaymath' (needed rearrangement 
+   after sec. 5). 
+
+2. New package option `addpageno' for adding page numbers to 
+   line number references -- see sec. 6.1 of lineno.pdf. 
+
+3. Improved support for \includeonly (and improved sec. 5.3, 
+   p. 27). 
+
+4. Improved compatibility with other packages that change \output 
+   (tameflts.sty, e.g., for saving footnotes against \marginpar 
+   and floats), added advice on this matter -- sec. 2.3, 
+   pp. 7, 14f.
+
+
+CHANGES  for lineno.sty v4.11 2005/03/08: 
+
+1. The `edtable' option now supports math environments like 
+`array'. This requires updating edtable.sty to v1.3. (The claim 
+in previous versions of edtable on this support simply was 
+wrong, sorry.) For how to make use of this support, we urge you 
+to read the usage instructions in edtable.sty (v1.3). These have 
+been extended very much, structured more clearly, and supplied 
+with examples. 
+
+2. \linelabel now complains when appearing outside line 
+numbering mode. This counters Stephan Boettcher's original 
+intention, but I generalize from my own experience that it is 
+helpful to be told when you have forgotten to switch into line 
+numbering mode and (e.g.) wonder why all the line number 
+references are 1 ... ednotes.sty users profit as well (at least 
+I expect and hope that anybody profits, which, to be sure, does 
+not mean that I hope that anybody forgets to switch ...). 
+
+3. The subsection on `edtable' in lineno.sty/tex/pdf was not 
+quite correct or complete -- corrected, improved. 
+
+4. The final list of user commands in lineno.sty/tex/pdf has not 
+been complete. This has not changed, but it is briefly explained 
+what is missing and where it can be found. 
+
+
+CHANGE  2005/01/20: 
+
+We have devised macros for indexing with line numbers, 
+yet we don't take the time to release them officially. 
+If you are interested, please ask via 
+
+    http://contact-ednotes.sty.de.vu 
+
+
+CHANGES  for lineno.sty v4.1 2004/10/19: 
+
+Extension packages from the Ednotes bundle for enabling 
+\linelabel in math mode and tabular environments are now 
+handled through new package options `mathrefs', `edtable', 
+`longtable', and `nolongtablepatch'. Two of these extension 
+packages moved from the ednotes folder to the lineno folder. 
+lineno.tex/pdf has been updated accordingly. 
+
+
+CHANGES  for lineno.sty v4.00 2004/09/03: 
+
+o incorporated earlier extension packages linenox0.sty, 
+  linenox1.sty, lnopatch.sty (which belonged to the 
+  Ednotes bundle before); 
+
+o adopted LaTeX Project Public License v1.3. 
+
diff --git a/Master/texmf-dist/doc/latex/lineno/COPYING.txt b/Master/texmf-dist/doc/latex/lineno/COPYING.txt
new file mode 100644
index 00000000000..48dca4a88f7
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/COPYING.txt
@@ -0,0 +1,24 @@
+% lineno.sty
+%
+% The files in this directory are
+%
+% Copyright 1995--2003 Stephan I. B"ottcher <boettcher@physik.uni-kiel.de>; 
+% Copyright 2002--2005 Uwe L"uck, http://contact-ednotes.sty.de.vu, 
+%                      for versions 4.x and code from former Ednotes 
+%                      bundle--author-maintained. 
+% 
+% The files can be redistributed and/or modified under 
+% the terms of the LaTeX Project Public License; either 
+% version 1.3a of the License, or any later version.
+% The latest version of this license is in
+%     http://www.latex-project.org/lppl.txt
+% We did our best to help you, but there is NO WARRANTY. 
+%
+% ============================================================================
+<- (UL) End of official declaration. 
+
+History: 
+This file -> The files 2004/10/12 ul 
+$Id: COPYING,v 3.0.2.1 2004/09/13 20:15:47 stephan Exp $
+LPPL v1.3a 2004/10/26 
+
diff --git a/Master/texmf-dist/doc/latex/lineno/README.txt b/Master/texmf-dist/doc/latex/lineno/README.txt
new file mode 100644
index 00000000000..5050f8dbd58
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/README.txt
@@ -0,0 +1,192 @@
+README
+                      lineno.sty  v4.31
+
+                         2005-10-03 
+
+The LaTeX package lineno.sty provides line numbers on paragraphs.
+After TeX has broken a paragraph into lines there will be line numbers
+attached to them, with the possibility to make references through the
+LaTeX \ref, \pageref cross reference mechanism.
+
+% Copyright 1995--2003 Stephan I. B"ottcher <boettcher@physik.uni-kiel.de>; 
+% Copyright 2002--2005 Uwe L"uck, http://www.contact-ednotes.sty.de.vu, 
+%                      for versions 4.x and code from former Ednotes 
+%                      bundle--author-maintained. 
+% 
+% The files listed below can be redistributed and/or modified under 
+% the terms of the LaTeX Project Public License; either 
+% version 1.3a of the License, or any later version.
+% The latest version of this license is in
+%     http://www.latex-project.org/lppl.txt
+% We did our best to help you, but there is NO WARRANTY. 
+
+** [ UL: A few festive words on history and responsibility   **
+**       are next preceding hard facts as to (see lower)     ** 
+**       o `Files'  and                                      ** 
+**       o `Installation and usage'.                       ] ** 
+
+2004-09-13 Uwe L"uck  [(UL)]  is new maintainer for lineno.sty. 
+
+lineno.sty served the purpose for which I wrote it years ago.  Uwe
+L"uck uses lineno.sty with his Ednotes package, which required quite a
+few changes and fixes.  His package depends on lineno, therefore
+Uwe agreed to take over the maintenance of lineno.sty.
+
+lineno.sty v4.0 includes most of the well tested changes that Uwe
+needs for Ednotes.  These changes blend well into the concepts of the
+package, so I am happy to let it go.  
+
+From here on it is Uwe's, and he may proceed to mangle it as he likes.
+Expect some radical changes.  You may find him to be quite a bit
+friendlier towards the poor souls who still use Windows :-).
+Currently, you need some kind of Unix environment to extract the
+source documentation from the sty file.
+
+If some version 3 users run into difficulties with Uwe's newer
+versions, but need a minor bug-fix in version 3, please do not
+hesitate to ask me for help.  But all requests for new features or
+major changes shall go to Uwe.
+
+Cheers
+Stephan
+
+
+[ Thanks!  And please let me know as well should 
+  compatibility problems arise!  The announced radical 
+  changes are postponed again this time (v4.1). 
+  --Ednotes is in CTAN:macros/latex/contrib/ednotes.
+                                                   Uwe ] 
+ 
+
+
+Changes:
+
+   2004-10-19  UL: package options for tabular and math 
+   2004-09-03  UL: merge Ednotes changes, taking over lineno.sty
+
+   2002 .. 2003 FMi, UL, SiB: bug fixes
+   2001-08-04 SiB: linenomath wrapping for \[ \]
+   2001-07-30 SiB: [hyperref] option obsolete.
+   2001-01-17 SiB: LaTeX class option [twocolumn] support
+   2001-01-04 SiB: LaTeX class option [fleqn] support
+   2000-12-18 SiB: longtable compatibility
+   2000-07-01 SiB: extra \newlabel items, [hyperref] option
+   2000-03-10 SiB: indirect call of \output, to work with multicol.
+   1999-08-28 SiB: fixed the footnote problem using \holdinginserts
+   1999-06-11 SiB: included the extensions into lineno.sty
+   1999-03-02 SIB: Added LPPL License
+
+
+Files:
+
+   README        This file.                              (v4.1: UL)
+   CHANGES       Differences to previous versions.       (v4.1: UL)
+   COPYING       The LPPL header.
+   lineno.sty    The package itself, ready to use.
+   edtable.sty   Module for tabular environments.        (UL, v4.1) 
+   ednmath0.sty  Module for \linelabel in math mode.     (UL, v4.1) 
+   lineno.tex    The source for the documentation.
+   lineno.pdf    PDF deriving from the  former.          (v4.1: UL)
+   lnosuppl.pdf  PDF listing of present non-PDF files 
+   ulineno.tex   The pathetic attempt of a users' manual. 
+                 [Describes v3.1 currently.]             (UL, v4.1) 
+   ulineno.pdf   PDF of former.
+   vplref.sty    Conditionally include page number in 
+                 line number references                  (UL, v4.2) 
+
+     As of version v3.00, the extension packages for lineno have all been
+     incorporated into lineno.sty itself.  Except for itemrule.sty,
+     which was removed.
+
+Home:
+
+   CTAN:macros/latex/contrib/lineno
+
+Authors:
+
+   Uwe L"uck <http://contact-ednotes.sty@web.de>
+   Stephan I. B"ottcher <boettcher@physik.uni-kiel.de>
+
+Compatibility with other packages:
+
+   wrapfig.sty   works since v2.05
+
+   multicol.sty  works partly since 3.02.  
+                 Do NOT use \linelabel.  Do NOT put a multicol in
+                 internal vertical mode {table}, {figure}, etc.
+
+   hyperref.sty  \ref to a \linelabel works since v3.03.
+
+   longtable.sty broke with lineno.sty loaded, but not enabled.  
+                 This is fixed in v3.04.
+
+Installation and usage (UL, v4.1): 
+
+   For being able to use ALL the new lineno.sty options, the 
+   following files must be "visible" to (La)TeX ("visible" 
+   explained below for beginners): 
+
+     lineno.sty, edtable.sty, ednmath0.sty, ltabptch.sty 
+ 
+   as above ("Home", note that clicking on "entire directory" 
+   suffices); 
+
+     longtable.sty -- from the standard LaTeX Tools bundle. 
+
+   Usage always starts with loading lineno.sty by \usepackage. 
+   The remaining .sty files are loaded automatically on the 
+   lineno.sty options (and we recommend not to load them through 
+   [the mandatory argument of] \usepackage). 
+ 
+   For details, see lineno.tex/pdf and the .sty files mentioned 
+   above--search especially for tabular and math mode. 
+   (+ `print' below here). 
+ 
+   "Visible to (LaTeX)": Some users don't understand this 
+   "visibility" for a while, and indeed it may be somewhat 
+   non-trivial. These users may find help in 
+
+      CTAN:macros/latex/ednotes/visible.txt .
+
+   E.g., former users of lineno.sty may just put all the .sty 
+   files into the folder (at their workplace) where they had 
+   placed lineno.sty before.                     (/UL, /v4.1)
+
+To print the documented source:
+
+   Take the style-file `lineno.sty', and feed it to a Un*x shell. 
+   (Or download the extracted source documentation `lineno.tex'.)
+
+      csh> source ./lineno.sty
+      sh>  . ./lineno.sty
+
+   [ I.e., type `sh lineno.sty' (e.g.) as a UNIX command line. 
+     Problems with awk may arise. I therefore switched to nawk 
+     in lineno.sty v4.00, but this may trouble you as well.    (UL) ] 
+
+   (Please ignore the error message at the beginning about the iffalse.)
+
+
+Please have a look at a similar work of Michal Jaegermann and James
+Fortune:
+         CTAN:macros/latex/contrib/numline/
+
+
+
+
+
+==============================================================================
+<- End of official README.txt (UL) 
+
+Changes for v4.1 (Oct. 2004): minor fixes (removed `supported/', e.g.); 
+bracketed text; lines with `(UL)'; redistribution with README only. 
+Formerly: 
+
+                      lineno.sty  v4.0
+
+     $Id: README,v 3.6.2.1 2004/09/13 20:15:47 stephan Exp $
+
+   CTAN:macros/latex/contrib/supported/lineno
+         CTAN:macros/latex/contrib/supported/numline/
+
+
diff --git a/Master/texmf-dist/doc/latex/lineno/lineno.pdf b/Master/texmf-dist/doc/latex/lineno/lineno.pdf
new file mode 100644
index 00000000000..6307ebe9773
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/lineno.pdf
diff --git a/Master/texmf-dist/doc/latex/lineno/lineno.tex b/Master/texmf-dist/doc/latex/lineno/lineno.tex
new file mode 100644
index 00000000000..428b5d5d8a5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/lineno.tex
@@ -0,0 +1,3167 @@
+\def\fileversion{v4.4} \def\filedate{2005/10/27}                      
+
+\title{\texttt{\itshape 
+lineno.sty \ \fileversion\ \filedate 
+\unskip}\\\ \\
+A \LaTeX\ package  to attach 
+\\        line numbers to paragraphs
+\unskip}\author{% 
+Stephan I. B\"ottcher 
+\\          Uwe L\"uck 
+\unskip}\date{% 
+boettcher@physik.uni-kiel.de 
+\\        http://contact-ednotes.sty.de.vu 
+\\}
+
+\documentclass[a4paper,12pt]{article}%D
+\usepackage{lineno}%D 
+\catcode`\_\active\let_~ 
+\def~{\verb~} 
+\let\lessthan< 
+\catcode`\<\active
+\def<#1>{$\langle${\itshape#1}\/$\rangle$}
+\catcode`\|\active
+\def|#1{\ttfamily\string#1}
+\newenvironment{code}
+{\par\runninglinenumbers
+\modulolinenumbers[1]%
+\linenumbersep.3em
+\footnotesize
+\def\linenumberfont
+{\normalfont\tiny\itshape}}
+{} 
+{\makeatletter \gdef\scs#1{\texttt
+{\protect\@backslashchar#1}}}
+\def\old{\par\footnotesize}
+{\catcode`\/\active
+\gdef\path{\begingroup\catcode`\/\active
+\let/\slash\dopath}
+\gdef\dopath#1{\slash\unpenalty#1\endgroup}}
+
+\begin{document}%D
+\pagewiselinenumbers
+\maketitle 
+\pagestyle{headings}
+\tableofcontents
+\sloppy
+
+\section{%
+Introductions 
+\unskip}
+
+(New v4.00)           Parts of former first section 
+have been rendered separate subsections for package 
+version_v4.00.                         (/New v4.00) 
+
+\subsection{% 
+Introduction to versions $\textrm{v}\lessthan4$
+\unskip} 
+
+This package provides line numbers on paragraphs.
+After \TeX\ has broken a paragraph into lines there will
+be line numbers attached to them, with the possibility to
+make references  through the \LaTeX\ ~\ref~, ~\pageref~
+cross reference mechanism.  This includes four issues:
+\begin{itemize}
+\item   attach a line number on each line,
+\item   create references to a line number,
+\item   control line numbering mode,
+\item   count the lines and print the numbers.
+\end{itemize}
+The first two points are implemented through patches to
+the output routine.  The third by redefining ~\par~, ~\@par~
+and ~\@@par~.  The counting is easy, as long as you want
+the line numbers run through the text.  If they shall
+start over at the top of each page, the aux-file as well
+as \TeX s memory have to carry a load for each counted line.
+
+I wrote this package for my wife Petra, who needs it for
+transcriptions of interviews.  This allows her to
+precisely refer to passages in the text.  It works well
+together with ~\marginpar~s, but not too well with displaymath.
+~\footnote~s are a problem, especially when they
+are split, but we may get there. 
+(New v4.00 UL) Version v4.00 overcomes the problem, I believe. 
+(/UL /New v4.00)
+
+lineno.sty works
+surprisingly well with other packages, for
+example, ~wrapfig.sty~.  So please try if it
+works with whatever you need, and if it does,
+please tell me, and if it does not, tell me as
+well, so I can try to fix it.
+
+\subsection{%
+Introduction to versions v4.00ff. (UL) 
+\unskip}
+
+~lineno.sty~ has been maintained by Stephan until version_v3.14.
+From version_v4.00 onwards, maintenance is shifting towards 
+Uwe L\"uck (UL), who is the author of v4\dots code and of v4\dots 
+changes in documentation. This came about as follows. 
+
+Since late 2002, Christian Tapp and Uwe L\"uck have employed 
+~lineno.sty~ for their ~ednotes.sty~, a package supporting 
+critical editions---cf.
+\[\mbox{\tt 
+http://ednotes.sty.de.vu 
+\unskip}\]
+---while you find ~ednotes.sty~ and surrounding files in 
+CTAN folder \path{macros/latex/contrib/ednotes}.
+
+Soon, some weaknesses of ~lineno.sty~ showed up, mainly since 
+Christian's critical editions (using ~ednotes.sty~) needed lots 
+of ~\linelabel~s and footnotes. (These weaknesses are due to 
+weaknesses of \LaTeX's ~\marginpar~ mechanism that Stephan 
+used for ~\linelabel~.) So we changed some ~lineno.sty~ 
+definitions in some extra files, which moreover offered new 
+features. We sent these files to Stephan, hoping he would take 
+the changes into ~lineno.sty~. However, he was too short of time. 
+
+Writing a TUGboat article on Ednotes in 2004, we hoped to 
+reduce the number of files in the Ednotes bundle and so asked 
+Stephan again. Now he generously offered maintenance to me, so 
+I could execute the changes on my own. 
+
+The improvements are as follows: 
+\begin{itemize}\item 
+[(i)]   Footnotes placement approaches intentions better 
+(footnotes formerly liked to pile up at late pages). 
+\item 
+[(ii)]  The number of ~\linelabel~s in one paragraph is no longer 
+limited to 18. 
+\item 
+[(iii)] ~\pagebreak~, ~\nopagebreak~, ~\vspace~, and the star 
+and optional versions of ~\\~ work as one would expect 
+(section_\ref{s:MVadj}).                                   %% Added for v4.1
+\item 
+[(iv)]  A command is offered which chooses the first line number 
+to be printed in the margin 
+(subsection_\ref{ss:Mod}).                                 %% Added for v4.1
+\item 
+[(v)]   (New v4.1) \LaTeX\ tabular environments (optionally) 
+get line numbers as well, and you can refer to them in the 
+usual automatic way. (It may be considered a shortcoming that, 
+precisely, \emph{rows} are numbered, not lines.---See 
+subsection_\ref{ss:Tab}.) 
+\item 
+[(vi)]  We are moving towards referring to math items 
+(subsection_\ref{ss:MathRef} and the hooks in 
+subsection_\ref{ss:LL}). 
+(/New v4.1) 
+\end{itemize}
+(Thanks to Stephan for making this possible!)
+
+
+Ednotes moreover profits from Stephan's offer with regard 
+to the documentation of our code which yielded these 
+improvements formerly. This documentation now becomes 
+printable, being part of the ~lineno.sty~ documentation. 
+
+Of course, Stephan's previous ~lineno.sty~ versions were a great 
+and ingenious work and exhibit greatest \TeX pertise. I never 
+could have done this. I learnt a lot in studying the code when 
+Christian pointed out strange output results and error 
+messages, and there are still large portions of ~lineno.sty~ 
+which I don't understand (consider only pagewise numbering of 
+lines). Fortunately, Stephan has offered future help if 
+needed.---My code for attaching line numbers to \emph{tabular 
+environments} (as mentioned above, now still in 
+~edtable.sty~) %%                                                      %% TODO
+developed from macros which Stephan and Christian experimented 
+with in December 2002. Stephan built the basics. 
+(However, I then became too proud to follow his advice only to 
+use and modify ~longtable.sty~.)
+
+There are some issues concerning use of counters on which I 
+don't agree with Stephan and where I would like to change the 
+code if ~lineno.sty~ is ``mine'' as Stephan offered. However, 
+Stephan is afraid of compatibility problems from which, in 
+particular, his wife could suffer in the near future. So he 
+demanded that I change as little as possible for my first 
+version. Instead of executing changes that I plan I just offer 
+my opinions at the single occasions. I hope to get in touch 
+this way with users who consider subtle features vital which I 
+consider strange. 
+
+On the other hand, the sections on improvements of the 
+implementation have been blown up very much and may be tiring 
+and litte understandable for mere \emph{users}. These users 
+may profit from the present presentation just by jumping to 
+sections_\ref{s:Opts} and_\ref{s:UserCmds}. There is a user's 
+guide ulineno.tex which may be even more helpful, but it has 
+not been updated for a while.                                        %% TODO
+
+\subsection{%
+Availability 
+\unskip}
+
+In case you have found the present file otherwise than from 
+CTAN: A recent version and documentation of this package 
+should be available from CTAN folder 
+\path{macros/latex/contrib/lineno}.
+Or mail to one of the addresses at top of file. 
+
+\subsection{% 
+Introductory code
+\unskip}
+
+This style option is written for \LaTeXe, November 1994 or later,
+since we need the ~\protected@write~ macro. 
+
+(New v4.00)               And we use ~\newcommand*~ for 
+controlling length of user macro arguments, which has been 
+available since December 1994. 
+\begin{code}\begin{verbatim}
+\NeedsTeXFormat{LaTeX2e}[1994/12/01] 
+\ProvidesPackage{lineno} 
+  [\filedate\space line numbers on paragraphs \fileversion] 
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+
+
+\section{%
+Put the line numbers to the lines
+\unskip}
+
+(New v4.00)                    This section contained the most 
+basic package code previously. For various purposes of 
+version_4\dots, much of these basics have been to be modified. 
+Much of my (UL's) reasoning on these modifications has been to 
+be reported. Sorry, the present section has been blown up 
+awfully thus and contains ramifications that may be difficult 
+to trace. We add some ~\subsection~ commands in order to cope 
+with the new situation. (/New v4.00) 
+
+\subsection{% 
+Basic code of \texttt{lineno.sty} \scs{output}
+\unskip}\label{ss:output} 
+
+The line numbers have to be attached by the output
+routine.  We simply set the ~\interlinepenalty~ to $-100000$.
+The output routine will be called after each line in the
+paragraph,  except the last,  where we trigger by ~\par~.
+The ~\linenopenalty~ is small enough to compensate a bunch of
+penalties (e.g., with ~\samepage~).
+
+(New v3.04)            Longtable uses 
+~\penalty~$-30000$.  The lineno penalty range was 
+shrunk to $-188000 \dots -32000$.  (/New v3.04)
+(New v4.00) New values are listed below (11111f.). (/New v4.00) 
+\begin{code}\begin{verbatim}
+\newcount\linenopenalty\linenopenalty=-100000
+\end{verbatim}
+\end{code}
+(UL)                              Hm. It is never needed below 
+that this is a counter. ~\def\linenopenalty{-100000\relax}~ 
+would do. (I guess this consumes more memory, but it 
+is more important to save counters than to save memory.) 
+I was frightened by ~-\linenopenalty~ below, but indeed 
+\TeX\ interprets the string ~--100000~ as 100000. 
+Has any user or extension package writer ever called 
+~\linenopenalty=xxx~, or could I really change this?---The 
+counter is somewhat faster than the macro. Together with the 
+compatibility question this seems to support keeping the 
+counter. (???) 
+(/UL) 
+\begin{code}\begin{verbatim}
+\mathchardef\linenopenaltypar=32000
+\end{verbatim}
+\end{code}
+So let's make a hook to ~\output~,  the direct way. The \LaTeX\ 
+macro ~\@reinserts~ puts the footnotes back on the page.
+
+(New v3.01)                ~\@reinserts~ badly
+screws up split footnotes.  The bottom part is
+still on the recent contributions list, and the
+top part will be put back there after the bottom
+part. Thus, since lineno.sty does not play well
+with ~\inserts~ anyway, we can safely experiment
+with ~\holdinginserts~, without making things
+much worse.    
+
+Or that's what I thought, but:  Just activating
+~\holdinginserts~ while doing the ~\par~ will
+not do the trick:  The ~\output~ routine may be
+called for a real page break before all line
+numbers are done, and how can we get control
+over ~\holdinginserts~ at that point?
+
+Let's try this:  When the ~\output~ routine is
+run with ~\holdinginserts=3~ for a real page
+break, then we reset ~\holdinginserts~ and
+restart ~\output~.
+
+Then, again, how do we keep the remaining
+~\inserts~ while doing further line numbers? 
+
+If we find ~\holdinginserts~=$-3$ we activate it again 
+after doing ~\output~.             (/New v3.01)
+
+(New v3.02)                    To work with
+multicol.sty, the original output routine is now
+called indirectly, instead of being replaced.
+When multicol.sty changes ~\output~, it is a
+toks register, not the real thing. (/New v3.02)
+
+(New v4.00)               Two further complications are added. 
+\begin{itemize}\item
+[(i)]  Problems with footnotes formerly resulted from 
+\LaTeX's ~\@reinserts~ in ~\@specialoutput~ which Stephan's 
+~\linelabel~ called via the ~\marginpar~ mechanism. 
+\item
+[(ii)] \LaTeX\ commands using ~\vadjust~ formerly didn't work 
+as one would have hoped. The problem is as follows: 
+Printing the line number results from 
+a box that the output routine inserts at the place of the 
+~\interlinepenalty~. ~\vadjust~ items appear \emph{above} the 
+~\interlinepenalty~ (\TeX book p._105). So ~\pagebreak~, e.g., 
+formerly sent the line number to the next page, while the 
+penalty from ~\nopagebreak~ could not tie the following line, 
+since it was screened off by the line number box.---Our trick 
+is putting the ~\vadjust~ items into a list macro from which 
+the output routine transfers them into the vertical list, 
+below the line number box. 
+\end{itemize}
+In this case_(ii), like in case_(i), footnotes would suffer 
+if ~\holdinginserts~ were non-positive. Indeed, in both 
+cases_(i) and_(ii) we tackle the footnote problem by extending 
+that part of Stephan's output routine that is active when 
+~\holdinginserts~ is positive. This extension writes the line 
+number ~\newlabel~ to the .aux file (which was formerly done 
+under $~\holdinginserts~=-3$) and handles the ~\vadjust~ 
+items.---To trigger ~\output~ and its ~\linelabel~ or, resp., 
+~\vadjust~ part, the list of signal penalties started 
+immediately before is increased here (first for ~\linelabel~, 
+second for postponed ~\vadjust~ items): 
+\begin{code}\begin{verbatim}
+\mathchardef\@Mllbcodepen=11111 
+\mathchardef\@Mppvacodepen=11112 
+\end{verbatim}
+\end{code}
+(/New v4.00) (New v4.2) David Kastrup urges to use a private 
+name instead of ~\the\output~ (LaTeX-L-list). Otherwise an 
+~\output~ routine loaded later and using ~\newtoks\output~ 
+again may get lost entirely. So we change use of ~\@LN@output~, 
+using it for the former purpose. Reference to what appeared 
+with the name of ~\output~ here lasts for a few lines and then 
+is given away. 
+\begin{code}\begin{verbatim}
+\let\@tempa\output
+\newtoks\output
+\let\@LN@output\output
+\output=\expandafter{\the\@tempa}
+\end{verbatim}
+\end{code}
+Now we add two cases to Stephan's output routine. (New v4.00)
+\begin{code}\begin{verbatim}
+\@tempa={%
+\end{verbatim}
+\end{code}
+(/New 4.2)
+\begin{code}\begin{verbatim}
+            \LineNoTest
+            \if@tempswa
+\end{verbatim}
+\end{code}
+(New v4.00)
+We insert recognition of waiting ~\linelabel~ items--- 
+\begin{code}\begin{verbatim}
+              \ifnum\outputpenalty=-\@Mllbcodepen 
+                \WriteLineNo 
+\end{verbatim}
+\end{code}
+---and of waiting ~\vadjust~ items: 
+\begin{code}\begin{verbatim}
+              \else 
+                \ifnum\outputpenalty=-\@Mppvacodepen 
+                  \PassVadjustList 
+                \else 
+\end{verbatim}
+\end{code}
+(/New v4.00) (New v4.2) Outsource ``Standard'' output 
+---which occurs so rarely---to subsection_\ref{ss:LLO}: 
+\begin{code}\begin{verbatim}
+                  \LineNoLaTeXOutput 
+\end{verbatim}
+\end{code}
+(/New v4.2) (New v4.00) 
+Two new ~\fi~s for the ~\linelabel~ and ~\vadjust~ tests--- 
+\begin{code}\begin{verbatim}
+                \fi 
+              \fi 
+\end{verbatim}
+\end{code}
+---and the remaining is 
+Stephan's code again: 
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+            \else  
+              \MakeLineNo
+            \fi
+            }
+\end{verbatim}
+\end{code}
+(New v4.00)                                  Our new macros 
+~\WriteLineNo~ and ~\PassVadjustList~ will be dealt with in 
+sections_\ref{s:LNref} and_\ref{ss:PVadj}. (/New v4.00) 
+
+\subsection{%
+\scs{LineNoTest}
+\unskip} 
+
+The float mechanism inserts ~\interlinepenalty~s during
+~\output~.  So carefully reset it before going on.  Else
+we get doubled line numbers on every float placed in
+horizontal mode, e.g, from ~\linelabel~.  
+
+Sorry, neither a ~\linelabel~ nor a ~\marginpar~ should
+insert a penalty, else the following linenumber
+could go to the next page. Nor should any other
+float.  So let us suppress the ~\interlinepenalty~ 
+altogether with the ~\@nobreak~ switch.
+
+Since (ltspace.dtx, v1.2p)[1996/07/26], the ~\@nobreaktrue~ does
+it's job globally.  We need to do it locally here.
+\begin{code}\begin{verbatim}
+\def\LineNoTest{%
+  \let\@@par\@@@par
+  \ifnum\interlinepenalty<-\linenopenaltypar
+     \advance\interlinepenalty-\linenopenalty
+     \@LN@nobreaktrue
+     \fi
+  \@tempswatrue
+  \ifnum\outputpenalty>-\linenopenaltypar\else
+     \ifnum\outputpenalty>-188000\relax
+       \@tempswafalse
+       \fi
+     \fi
+  }
+ 
+\def\@LN@nobreaktrue{\let\if@nobreak\iftrue} % renamed v4.33
+\end{verbatim}
+\end{code}
+(UL)                                      I thought here were 
+another case of the save stack problem explained in \TeX book, 
+p._301, namely through both local and global changing 
+~\if@nobreak~. However, ~\@LN@nobreak~ is called during 
+~\@LN@output~ only, while ~\@nobreaktrue~ is called by \LaTeX's 
+~\@startsection~ only. The latter never happens during 
+~\@LN@output~. So there is no local value of ~\if@nobreak~ on 
+save stack when ~\@nobreaktrue~ acts, since ~\the\@LN@output~ 
+(where ~\@LN@output~ is a new name for the original ~\output~) 
+is executed within a group (\TeX book p._21).
+(/UL) 
+
+\subsection{%
+Other output routines (v4.2)
+\unskip}\label{ss:LLO} 
+
+I had thought of dealing with bad interference of footnotes 
+(and ~\enlargethispage~) with (real) ~\marginpar~s and floats 
+\emph{here}. Yet this is done in 
+\[
+~http://~\mbox{[CTAN]}
+~/macros/latex/contrib/tamefloats/tameflts.sty~
+\]
+now, and I prefer striving for compatibility with the latter. 
+(See there for expanding on the problem.)
+This requires returning the special absolute value of 
+~\holdinginserts~ that ~lineno.sty~ finds at the end of a newly 
+typeset paragraph---now done in subsection_\ref{ss:calls}
+(~\linenumberpar~). 
+The former ~\LineNoHoldInsertsTest~ has been filled into here. 
+Note: when the following code is invoked, we have 
+~\if@tempswa~_ =_~\iftrue~. 
+WARNING: I am still not sure whether the present code is good 
+for cooperating with other packages that use ~\holdinginserts~. 
+\begin{code}\begin{verbatim}
+\def\LineNoLaTeXOutput{% 
+  \ifnum \holdinginserts=\thr@@   % v4.33 without \@tempswafalse
+    \global\holdinginserts-\thr@@ 
+    \unvbox\@cclv 
+    \ifnum \outputpenalty=\@M \else \penalty\outputpenalty \fi 
+  \else
+    \if@twocolumn \let\@makecol\@LN@makecol \fi
+    \the\@LN@output % finally following David Kastrup's advice. 
+    \ifnum \holdinginserts=-\thr@@ 
+      \global\holdinginserts\thr@@ \fi 
+  \fi
+}
+\end{verbatim}
+\end{code}
+\textit{More on dealing with output routines from other 
+packages:} 
+Since ~lineno.sty~'s output routine is called at least once 
+for each output line, I think it should be in \TeX's 
+original ~\output~, while output routines dealing with 
+building pages and with floats etc.\ should be filled into 
+registers addressed by ~\output~ after ~\newtoks\output~. 
+Therefore                                                  \begin{enumerate}
+\item 
+~tameflts.sty~ should be loaded \emph{after} ~lineno.sty~; 
+\item 
+if a class changes ~\output~ (APS journal class revtex4, 
+e.g.), ~lineno.sty~ should be loaded by ~\RequirePackage~ 
+[here presumably following some options in 
+brackets]~{lineno}~ \emph{preceding} ~\documentclass~. 
+\item 
+If you actually maintain such a class, please consider 
+loading ~lineno.sty~ on some draft option. The bunch of 
+lineno's package options may be a problem, but perhaps the 
+purpose of your class is offering only very few of lineno's 
+options anyway, maybe just one. 
+\end{enumerate} 
+The latter may also be needed with classes that don't follow 
+David Kastrup's rule on changing ~\output~. 
+
+\subsection{%
+\scs{MakeLineNo}: Actually attach line number 
+\unskip}\label{ss:MLN} 
+
+We have to return all the page to the current page, and
+add a box with the line number, without adding
+breakpoints, glue or space.  The depth of our line number
+should be equal to the previous depth of the page, in
+case the page breaks here,  and the box has to be moved up
+by that depth.  
+
+The ~\interlinepenalty~ comes after the ~\vadjust~ from a
+~\linelabel~,  so we increment the line number \emph{after}
+printing it. The macro ~\makeLineNumber~ produces the
+text of the line number, see section \ref{appearance}.
+
+(UL)                        I needed a while to understand 
+the sentence on incrementing. Correctly: writing the 
+~\newlabel~ to the .aux file is triggered by the signal 
+penalty that ~\end@float~ inserts via ~\vadjust~. 
+However, this could be changed by our new ~\PostponeVadjust~. 
+After ~\c@linenumber~ has been introduced as a \LaTeX\ 
+counter, it might be preferable that it behaved like standard 
+\LaTeX\ counters which are incremented shortly before printing. 
+But this may be of little practical relevance in this case, 
+as ~\c@linenumber~ is driven in a very non-standard 
+way.---However still, this behaviour of ~\c@linenumber~ 
+generates a problem with our ~edtable.sty~. 
+(/UL). 
+
+Finally we put in the natural ~\interlinepenalty~, except
+after the last line. 
+
+(New v3.10) Frank Mittelbach points out that box255 may be 
+less deep than the last box inside, so he proposes to 
+measure the page depth with ~\boxmaxdepth=\maxdimen~.
+(/New v3.10)
+
+(UL, New v4.00)               We also resume the matter of 
+~\vadjust~ items that was started in section_\ref{ss:output}. 
+
+\TeX\ puts only nonzero interline 
+penalties into the vertical list (\TeX book p._105), while 
+~lineno.sty~ formerly replaced the signal interline penalty by 
+something closing with an explicit penalty of the value that 
+the interline penalty would have without ~lineno.sty~. 
+This is usually 0. Now, explicit vertical penalties can be 
+very nasty with respect to ~\nopagebreak~, e.g., a low (even 
+positive) ~\widowpenalty~ may force a widow where you 
+explicitly tried to forbid it by ~\nopagebreak~ 
+(see explanation soon below). 
+The ~\nopagebreak~ we create here would never work if all 
+those zero penalties were present.---On 
+the other hand, we cannot just omit Stephan's zero penalties, 
+because \TeX\ puts a penalty of 10000 after what ~lineno.sty~ 
+inserts (\TeX book p._125). This penalty must be overridden 
+to allow page breaks between ordinary lines. To revive 
+~\nopagebreak~, we therefore replace those zero (or low) 
+penalties by penalties that the user demanded by 
+~\nopagebreak~.---This mechanism is not perfect and does not 
+exactly restore the original \LaTeX\ working of ~\pagebreak~ 
+and ~\nopagebreak~. Viz., if there are several vertical 
+penalties after a line which were produced by closely sitting 
+~\[no]pagebreak~s, without ~lineno.sty~ the lowest penalty would 
+be effective (cf._\TeX book exercise_14.10). Our mechanism, by 
+contrast, chooses the \emph{last} user-set penalty of the line 
+as the effective one. It would not be very difficult to come 
+more close to the original mechanism, but until someone urges 
+us we will cling to the present simple way. You may consider an 
+advantage of the difference between our mechanism and the 
+original one that the user here can actually override low 
+penalties by ~\nopagebreak~, which may be what a lay \LaTeX\ 
+user would expect. 
+(/UL, /New v4.00) 
+\begin{code}\begin{verbatim}
+\def\MakeLineNo{%
+   \@LN@maybe@normalLineNumber                        % v4.31 
+   \boxmaxdepth\maxdimen\setbox\z@\vbox{\unvbox\@cclv}%
+   \@tempdima\dp\z@ \unvbox\z@
+   \sbox\@tempboxa{\hb@xt@\z@{\makeLineNumber}}%
+\end{verbatim}
+\end{code}
+(New v4.00) Previously, 
+\begin{old}\begin{verbatim}
+%    \stepcounter{linenumber}%
+\end{verbatim}
+\end{old}
+followed. (Of course, there was no 
+comment mark; I put it there to make 
+reading the actual code easy.) 
+
+(New v4.22: improved) Why not just 
+\[~\global\advance\c@linenumber\@ne~?\]
+~\stepcounter~ additionally resets ``subordinate'' 
+counters, but which could these (usefully) be? 
+(New v4.4) I had forgotten v4.00, ``physical page counter'' 
+~\c@LN@truepage~ in section_\ref{ss:PW}! (/New v4.4) 
+
+But then, our ~edtable.sty~ and its ~longtable~ option 
+should use it as well. So use a shorthand supporting 
+uniformity. You can even use it as a hook for choosing 
+~\global\advance\c@linenumber\@ne~ instead of our choice. 
+(/New v4.22) 
+\begin{code}\begin{verbatim}
+   \stepLineNumber
+\end{verbatim}
+\end{code}
+(New v4.4)   Now 
+\begin{code}\begin{verbatim}
+   \ht\@tempboxa\z@ \@LN@depthbox 
+\end{verbatim}
+\end{code}
+appends the box containing the line number without changing 
+~\prevdepth~---see end of section. 
+Now is the time for inserting the $\dots$ (/New v4.4) 
+~\vadjust~ items. We cannot do this much later, because 
+their right place is above the artificial interline 
+penalty which Stephan's code will soon insert 
+(cf._\TeX book p._105). The next command is just ~\relax~ 
+if no ~\vadjust~ items have been accumulated for the 
+current line. Otherwise it is a list macro inserting 
+the ~\vadjust~ items and finally resetting itself. 
+(This is made in section_\ref{ss:PVadj} below.)
+If the final item is a penalty, it is stored so it can 
+compete with other things about page breaking. 
+\begin{code}\begin{verbatim}
+   \@LN@do@vadjusts 
+   \count@\lastpenalty 
+\end{verbatim}
+\end{code}
+At this place, 
+\begin{old}\begin{verbatim}
+%    \ifnum\outputpenalty=-\linenopenaltypar\else
+\end{verbatim}
+\end{old}
+originally followed. We need something \emph{before} the 
+~\else~: 
+\begin{code}\begin{verbatim}
+   \ifnum\outputpenalty=-\linenopenaltypar 
+     \ifnum\count@=\z@ \else 
+\end{verbatim}
+\end{code}
+So final ~\pagebreak[0]~ or ~\nopagebreak[0]~ has no 
+effect---but this will make a difference after headings only, 
+where nobody should place such a thing anyway. 
+\begin{code}\begin{verbatim}
+       \xdef\@LN@parpgbrk{% 
+         \penalty\the\count@
+         \global\let\noexpand\@LN@parpgbrk
+                      \noexpand\@LN@screenoff@pen}% v4.4 
+\end{verbatim}
+\end{code}
+That penalty will replace former ~\kern\z@~ in 
+~\linenumberpar~, see subsection_\ref{ss:calls}.---A
+few days earlier, I tried to send just a penalty value. 
+However, the ~\kern\z@~ in ~\linenumberpar~ is crucial, 
+as I then found out. See below.---The final penalty is 
+repeated, but this does no harm. (It would not be very 
+difficult to avoid the repeating, but it may even be 
+less efficient.) It may be repeated due to the previous 
+~\xdef~, but it may be repeated as well below in the 
+present macro where artificial interline penalty is to 
+be overridden.
+\begin{code}\begin{verbatim}
+     \fi
+   \else
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+     \@tempcnta\outputpenalty
+     \advance\@tempcnta -\linenopenalty
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{old}\begin{verbatim}
+%        \penalty\@tempcnta
+\end{verbatim}
+\end{old}
+followed previously. To give ~\nopagebreak~ a chance, 
+we do 
+\begin{code}\begin{verbatim}
+     \penalty \ifnum\count@<\@tempcnta \@tempcnta \else \count@ \fi 
+\end{verbatim}
+\end{code}
+instead.---In ~linenox0.sty~, the ~\else~ thing once was omitted. 
+Sergei Mariev's complaint (thanks!) showed that it is vital 
+(see comment before ~\MakeLineNo~). 
+The remaining ~\fi~ from previous package version closes the 
+~\ifnum\outputpenalty~\dots 
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+   \fi
+   }
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{code}\begin{verbatim}
+\newcommand\stepLineNumber{\stepcounter{linenumber}} 
+\end{verbatim}
+\end{code}
+For reason, see use above. (/New v4.00) 
+
+(New v4.4)   The depth preserving trick is drawn here from 
+~\MakeLineNo~ because it will be used again in 
+section_\ref{ss:calls}.
+\begin{code}\begin{verbatim}
+\def\@LN@depthbox{% 
+  \dp\@tempboxa=\@tempdima
+  \nointerlineskip \kern-\@tempdima \box\@tempboxa} 
+\end{verbatim}
+\end{code}
+(/New v4.4) 
+
+\section{%
+Control line numbering 
+\unskip}
+\subsection{%
+Inserting \scs{output} calls           %% own subsec. v4.4. 
+\unskip}\label{ss:calls}
+The line numbering is controlled via ~\par~.  \LaTeX\
+saved the \TeX-primitive ~\par~ in ~\@@par~.  We push it
+one level further out, and redefine ~\@@par~ to insert
+the ~\interlinepenalty~ needed to trigger the
+line numbering. And we need to allow pagebreaks after a
+paragraph. 
+
+New (2.05beta): the prevgraf test.  A paragraph that ends with a
+displayed equation, a ~\noindent\par~ or ~wrapfig.sty~ produce empty
+paragraphs. These should not get a spurious line number via
+~\linenopenaltypar~. 
+\begin{code}\begin{verbatim}
+\let\@@@par\@@par
+\newcount\linenoprevgraf
+\end{verbatim}
+\end{code}
+(UL)                          And needs ~\linenoprevgraf~ 
+to be a counter? Perhaps there may be a paragraph having 
+thousands of lines, so ~\mathchardef~ doesn't suffice (really??). 
+A macro ending on ~\relax~ might suffice, but would be 
+somewhat slow. I think I will use ~\mathchardef~ next time. 
+Or has any user used ~\linenoprevgraf~? (/UL) 
+\begin{code}\begin{verbatim}
+\def\linenumberpar{% 
+  \ifvmode \@@@par \else 
+    \ifinner \@@@par \else
+      \xdef\@LN@outer@holdins{\the\holdinginserts}% v4.2 
+      \advance \interlinepenalty \linenopenalty
+      \linenoprevgraf \prevgraf
+      \global \holdinginserts \thr@@ 
+      \@@@par
+      \ifnum\prevgraf>\linenoprevgraf
+        \penalty-\linenopenaltypar
+      \fi
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{old}\begin{verbatim}
+%          \kern\z@ 
+\end{verbatim}
+\end{old}
+was here previously. What for? 
+According to \TeX book p._125, Stephan's 
+interline penalty is changed into 10000. At the end of a 
+paragraph, the ~\parskip~ would follow that penalty of 10000, 
+so there could be a page break neither at the 
+~\parskip~ nor at the ~\baselineskip~ (\TeX book p._110)---so 
+there could never be a page break between two paragraphs. 
+So something must screen off the 10000 penalty. 
+Indeed, the ~\kern~ is a place to break. 
+(Stephan once knew this: see `allow pagebreaks' above.)
+
+Formerly, I tried to replace ~\kern\z@~ by 
+\begin{old}\begin{verbatim}
+%         \penalty\@LN@parpgpen\relax 
+\end{verbatim}
+\end{old}
+---but this allows a page break after heading. So: 
+\begin{code}\begin{verbatim}
+      \@LN@parpgbrk 
+\end{verbatim}
+\end{code}
+
+These and similar changes were formerly done by ~linenox1.sty~. 
+(/New v4.00) 
+
+(New v4.4) 
+A ~\belowdisplayskip~ may precede the previous when the paragraph 
+ends on a display-math; or there may be a ~\topsep~ from a list, etc. 
+~\addvspace~ couldn't take account for it with ~\kern\z@~ 
+here. v4.32 therefore moved the space down -- with at least two 
+bad consequences. 
+Moreover, David Josef Dev observes that ~\kern\z@~ may 
+inappropriately yield column depth 0pt. 
+For these reasons, we introduce ~\@LN@screenoff@pen~ below. 
+(/New v4.4) 
+\begin{code}\begin{verbatim}
+      \global\holdinginserts\@LN@outer@holdins % v4.2
+      \advance\interlinepenalty -\linenopenalty
+    \fi     % from \ifinner ... \else 
+  \fi}      % from \ifvmode ... \else 
+\end{verbatim}
+\end{code}
+(New v4.00, v4.4) Initialize ~\@LN@parpgbrk~, accounting 
+for earlier space and for appropriate columndepth. 
+We use former ~\MakeLineNo~'s depth-preverving trick 
+~\@LN@depthbox~ again: 
+\begin{code}\begin{verbatim}
+\def\@LN@screenoff@pen{% 
+  \ifdim\lastskip=\z@ 
+    \@tempdima\prevdepth \setbox\@tempboxa\null 
+    \@LN@depthbox                           \fi}
+ 
+\global\let\@LN@parpgbrk\@LN@screenoff@pen 
+\end{verbatim}
+\end{code}
+(/New v4.4, v4.00) 
+\subsection{%
+Turning on/off                         %% own subsec. v4.4.
+\unskip}\label{ss:OnOff}
+The basic commands to enable and disable line numbers.
+~\@par~ and ~\par~ are only touched, when they are ~\let~ 
+to ~\@@@par~/~\linenumberpar~.  The line number may be
+reset to 1 with the star-form, or set by an optional
+argument ~[~<number>~]~. 
+
+(New v4.00)        We add ~\ifLineNumbers~ etc.\ since 
+a number of our new adjustments need to know whether 
+linenumbering is active. This just provides a kind of 
+shorthand for ~\ifx\@@par\linenumberpar~; moreover it is 
+more stable: who knows what may happen to ~\@@par~?---A 
+caveat: ~\ifLineNumbers~ may be wrong. E.g., it may be 
+~\iffalse~ where it acts, while a ~\linenumbers~ a few 
+lines below---in the same paragraph---brings about that 
+the line where the ~\ifLineNumbers~ appears gets a 
+marginal number. 
+(New v4.3)        Just noticed: Such tricks have been 
+disallowed with v4.11, see subsections_\ref{ss:LL} 
+and_\ref{ss:OnOff}.---Moreover, the switching between
+meanings of ~\linelabel~ for a possible error message 
+as of v4.11 is removed. Speed is difficult to esteem 
+and also depends on applications. Just use the most 
+simple code you find.                      (/New v4.3) 
+\begin{code}\begin{verbatim}
+\newif\ifLineNumbers \LineNumbersfalse 
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+\def\linenumbers{% 
+     \LineNumberstrue                            % v4.00 
+     \xdef\@LN@outer@holdins{\the\holdinginserts}% v4.3 
+\end{verbatim}
+\end{code}
+(New v4.3) The previous line is for ~{linenomath}~ 
+in a first numbered paragraph.         (/New v4.3) 
+\begin{code}\begin{verbatim}
+     \let\@@par\linenumberpar
+ %      \let\linelabel\@LN@linelabel % v4.11, removed v4.3 
+     \ifx\@par\@@@par\let\@par\linenumberpar\fi
+     \ifx\par\@@@par\let\par\linenumberpar\fi
+     \@LN@maybe@moduloresume         % v4.31 
+     \@ifnextchar[{\resetlinenumber}%]
+                 {\@ifstar{\resetlinenumber}{}}%
+     }
+ 
+\def\nolinenumbers{% 
+  \LineNumbersfalse                              % v4.00
+  \let\@@par\@@@par
+ %   \let\linelabel\@LN@LLerror      % v4.11, removed v4.3 
+  \ifx\@par\linenumberpar\let\@par\@@@par\fi
+  \ifx\par\linenumberpar\let\par\@@@par\fi
+  }
+\end{verbatim}
+\end{code}
+(New v4.00)               Moreover, it is useful to switch to 
+~\nolinenumbers~ in ~\@arrayparboxrestore~. We postpone this 
+to section_\ref{ss:ReDef} where we'll have an appending macro 
+for doing this.                                  (/New v4.00) 
+
+What happens with a display math?  Since ~\par~ is not executed,
+when breaking the lines before a display, they will not get
+line numbers.  Sorry, but I do not dare to change
+~\interlinepenalty~ globally, nor do I want to redefine
+the display math environments here.
+\begin{displaymath}
+display \ math
+\end{displaymath}
+See the subsection below, for a wrapper environment to make
+it work.  But that requires to wrap each and every display
+in your \LaTeX\ source %%.
+(see option ~displaymath~ in subsections_\ref{ss:v3opts} 
+and_\ref{ss:display} for some relief [UL]). 
+
+The next two commands are provided to turn on line
+numbering in a specific mode. Please note the difference:
+for pagewise numbering, ~\linenumbers~ comes first to
+inhibit it from seeing optional arguments, since
+re-/presetting the counter is useless. 
+\begin{code}\begin{verbatim}
+\def\pagewiselinenumbers{\linenumbers\setpagewiselinenumbers}
+\def\runninglinenumbers{\setrunninglinenumbers\linenumbers}
+\end{verbatim}
+\end{code}
+Finally, it is a \LaTeX\ style, so we provide for the use
+of environments, including the suppression of the
+following paragraph's indentation.
+
+(UL)                                I am drawing the following 
+private thoughts of Stephan's to publicity so that others may 
+think about them---or to remind myself of them in an efficient 
+way.                                                     (/UL) 
+\begin{old}\begin{verbatim} 
+% TO DO: add \par to \linenumbers, if called from an environment.
+% To DO: add an \@endpe hack if \linenumbers are turned on
+%        in horizontal mode. {\par\parskip\z@\noindent} or
+%        something.
+\end{verbatim}
+\end{old} 
+(UL)     However, I rather think that ~\linenumbers~ and        %% v4.31 
+~\nolinenumbers~ should execute a ~\par~ already. (Then the 
+~\par~s in the following definitions should be removed.) (/UL) 
+\begin{code}\begin{verbatim}
+\@namedef{linenumbers*}{\par\linenumbers*}
+\@namedef{runninglinenumbers*}{\par\runninglinenumbers*}
+ 
+\def\endlinenumbers{\par\@endpetrue}
+\let\endrunninglinenumbers\endlinenumbers
+\let\endpagewiselinenumbers\endlinenumbers
+\expandafter\let\csname endlinenumbers*\endcsname\endlinenumbers
+\expandafter\let\csname endrunninglinenumbers*\endcsname\endlinenumbers
+\let\endnolinenumbers\endlinenumbers
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Display math
+\unskip}\label{ss:DM}
+
+Now we tackle the problem to get display math working.  
+There are different options.
+\begin{enumerate}\item[
+1.]  Precede every display math with a ~\par~.  
+Not too good.
+\item[
+2.]  Change ~\interlinepenalty~ and associates globally.  
+Unstable.
+\item[
+3.]  Wrap each display math with a ~{linenomath}~  
+environment. 
+\end{enumerate}
+We'll go for option 3.  See if it works:  
+\begin{linenomath}
+\begin{equation}
+display \ math
+\end{equation}
+\end{linenomath}
+The star form ~{linenomath*}~ should also number the lines
+of the display itself,
+\begin{linenomath*}
+\begin{eqnarray}
+multi   && line \\
+display && math \\
+& 
+\begin{array}{c}
+with \\
+array
+\end{array}
+&
+\end{eqnarray}
+\end{linenomath*}
+including multline displays.
+
+First, here are two macros to turn
+on linenumbering on paragraphs preceeding displays, with
+numbering the lines of the display itself, or without.
+The ~\ifx..~ tests if line numbering is turned on.  It
+does not harm to add these wrappers in sections that are
+not numbered.  Nor does it harm to wrap a display
+twice, e.q, in case you have some ~{equation}~s wrapped
+explicitely, and later you redefine ~\equation~ to do it
+automatically. 
+
+(New v4.3)  To avoid the spurious line number above a 
+display in vmode, I insert ~\ifhmode~.       (/New v4.3) 
+\begin{code}\begin{verbatim}
+\newcommand\linenomathNonumbers{%
+  \ifLineNumbers 
+    \ifnum\interlinepenalty>-\linenopenaltypar
+      \global\holdinginserts\thr@@ 
+      \advance\interlinepenalty \linenopenalty
+     \ifhmode                                   % v4.3 
+      \advance\predisplaypenalty \linenopenalty
+     \fi 
+    \fi
+  \fi
+  \ignorespaces
+  }
+ 
+\newcommand\linenomathWithnumbers{%
+  \ifLineNumbers 
+    \ifnum\interlinepenalty>-\linenopenaltypar
+      \global\holdinginserts\thr@@ 
+      \advance\interlinepenalty \linenopenalty
+     \ifhmode                                   % v4.3 
+      \advance\predisplaypenalty \linenopenalty
+     \fi 
+      \advance\postdisplaypenalty \linenopenalty
+      \advance\interdisplaylinepenalty \linenopenalty
+    \fi
+  \fi
+  \ignorespaces
+  }
+\end{verbatim}
+\end{code}
+The ~{linenomath}~ environment has two forms, with and
+without a star.  The following two macros define the
+environment, where the stared/non-stared form does/doesn't number the
+lines of the display or vice versa.
+\begin{code}\begin{verbatim}
+\newcommand\linenumberdisplaymath{%
+  \def\linenomath{\linenomathWithnumbers}%
+  \@namedef{linenomath*}{\linenomathNonumbers}%
+  }
+ 
+\newcommand\nolinenumberdisplaymath{%
+  \def\linenomath{\linenomathNonumbers}%
+  \@namedef{linenomath*}{\linenomathWithnumbers}%
+  }
+ 
+\def\endlinenomath{% 
+  \ifLineNumbers                            % v4.3 
+   \global\holdinginserts\@LN@outer@holdins % v4.21 
+  \fi 
+   \global % v4.21 support for LaTeX2e earlier than 1996/07/26. 
+   \@ignoretrue
+}
+\expandafter\let\csname endlinenomath*\endcsname\endlinenomath
+\end{verbatim}
+\end{code}
+The default is not to number the lines of a display.  But
+the package option ~mathlines~ may be used to switch
+that behavior.
+\begin{code}\begin{verbatim}
+\nolinenumberdisplaymath
+\end{verbatim}
+\end{code}
+
+\section{%
+Line number references
+\unskip}\label{s:LNref} 
+\subsection{% 
+Internals                              %% New subsec. v4.3. 
+\unskip}
+The only way to get a label to a line number in a
+paragraph is to ask the output routine to mark it.
+
+(New v4.00) The following two paragraphs don't hold any 
+longer, see below. (/New v4.00) 
+\begin{old}\begin{verbatim}
+% We use the marginpar mechanism to hook to ~\output~ for a
+% second time.  Marginpars are floats with number $-1$, we
+% fake marginpars with No $-2$. Originally, every negative
+% numbered float was considered to be a marginpar.
+% 
+% The float box number ~\@currbox~ is used to transfer the
+% label name in a macro called ~\@LNL@~<box-number>.
+\end{verbatim}
+\end{old}
+A ~\newlabel~ is written to the aux-file.  The reference
+is to ~\theLineNumber~, \emph{not} ~\thelinenumber~.
+This allows to hook in, as done below for pagewise line
+numbering. 
+
+(New v3.03) The ~\@LN@ExtraLabelItems~ are added for a hook
+to keep packages like ~{hyperref}~ happy.      (/New v3.03)
+
+(New v4.00) 
+We fire the ~\marginpar~ mechanism, so we leave \LaTeX's 
+~\@addmarginpar~ untouched. 
+\begin{old}\begin{verbatim}
+% \let\@LN@addmarginpar\@addmarginpar
+% \def\@addmarginpar{%
+%    \ifnum\count\@currbox>-2\relax
+%      \expandafter\@LN@addmarginpar
+%    \else
+%      \@cons\@freelist\@currbox
+%      \protected@write\@auxout{}{%
+%          \string\newlabel
+%             {\csname @LNL@\the\@currbox\endcsname}%
+%             {{\theLineNumber}{\thepage}\@LN@ExtraLabelItems}}%
+%    \fi}
+\end{verbatim}
+\end{old}
+OK, we keep Stephan's ~\@LN@ExtraLabelItems~: 
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+\let\@LN@ExtraLabelItems\@empty
+\end{verbatim}
+\end{code}
+(New v4.00) 
+We imitate the ~\marginpar~ mechanism without using the 
+~\@freelist~ boxes. ~\linelabel~ will indeed place a signal 
+penalty (~\@Mllbcodepen~, new), and it will put a label into 
+some list macro ~\@LN@labellist~. A new part of the output 
+routine will take the labels from the list and will write 
+~\newlabel~s to the .aux file. 
+
+The following is a version of \LaTeX's ~\@xnext~.
+\begin{code}\begin{verbatim}
+\def\@LN@xnext#1\@lt#2\@@#3#4{\def#3{#1}\gdef#4{#2}}
+\end{verbatim}
+\end{code}
+This takes an item ~#1~ from a list ~#4~ into ~#3~; 
+to be used as ~\expandafter\@LN@xnext#4\@@#3#4~. 
+Our lists use ~\@lt~ after each item for separating. 
+Indeed, there will be another list macro which can 
+appear as argument ~#4~, this will be used for moving 
+~\vadjust~ items (section_\ref{ss:PVadj}). 
+The list for ~\linelabel~s is the following: 
+\begin{code}\begin{verbatim}
+\global\let\@LN@labellist\@empty 
+\end{verbatim}
+\end{code}
+The next is the new part of the output routine writing the 
+~\newlabel~ to the .aux file. Since it is no real page output, 
+the page is put back to top of the main vertical list. 
+\begin{code}\begin{verbatim}
+\def\WriteLineNo{% 
+  \unvbox\@cclv 
+  \expandafter \@LN@xnext \@LN@labellist \@@ 
+                          \@LN@label \@LN@labellist 
+  \protected@write\@auxout{}{\string\newlabel{\@LN@label}% 
+         {{\theLineNumber}{\thepage}\@LN@ExtraLabelItems}}% 
+}
+\end{verbatim}
+\end{code}
+(/New v4.00)
+
+\subsection{%
+The \scs{linelabel} command
+\unskip}\label{ss:LL}
+To refer to a place in line ~\ref{~<foo>~}~ at page
+~\pageref{~<foo>~}~ you place a ~\linelabel{~<foo>~}~ at
+that place.
+
+\linelabel{demo}
+\marginpar{\tiny\raggedright
+See if it works: This paragraph
+starts on page \pageref{demo}, line
+\ref{demo}.  
+\unskip}%
+(New v4.11) 
+\begin{old}\begin{verbatim}
+% If you use this command outside a ~\linenumbers~
+% paragraph, you will get references to some bogus
+% line numbers, sorry.  But we don't disable the command,
+% because only the ~\par~ at the end of a paragraph  may
+% decide whether to print line numbers on this paragraph
+% or not.  A ~\linelabel~ may legally appear earlier than
+% ~\linenumbers~.
+\end{verbatim}
+\end{old} 
+This trick is better not allowed---see subsections_\ref{ss:LL} 
+and_\ref{ss:OnOff}.
+(/New v4.11)
+
+~\linelabel~ 
+\begin{old}\begin{verbatim}
+%, via a fake float number $-2$, %% new mechanism v4.00
+\end{verbatim}
+\end{old}
+puts a
+~\penalty~ into a ~\vadjust~, which triggers the
+pagebuilder after putting the current line to the main
+vertical list.  A ~\write~ is placed on the main vertical
+list, which prints a reference to the current value of
+~\thelinenumber~ and ~\thepage~ at the time of the
+~\shipout~.
+
+A ~\linelabel~ is allowed only in outer horizontal mode.
+In outer vertical mode we start a paragraph, and ignore
+trailing spaces (by fooling ~\@esphack~).
+
+(New v4.00) We aim at relaxing the previous condition. 
+We insert a hook ~\@LN@mathhook~ and a shorthand 
+~\@LN@postlabel~ to support the ~mathrefs~ option which 
+allows ~\linelabel~ in math mode. 
+
+The next paragraph is no longer valid. 
+\begin{old}\begin{verbatim}
+% The argument of ~\linelabel~ is put into a macro with a
+% name derived from the number of the allocated float box.
+% Much of the rest is dummy float setup.
+\end{verbatim}
+\end{old}
+(/New v4.00) 
+
+(New v4.11) 
+\begin{old}\begin{verbatim} 
+% \def\linelabel#1{%
+\end{verbatim}
+\end{old} 
+I forgot ~\linenumbers~ today, costed me hours or so. 
+\begin{code}\begin{verbatim}
+\def\@LN@LLerror{\PackageError{lineno}{% 
+  \string\linelabel\space without \string\linenumbers}{% 
+  Just see documentation. (New feature v4.11)}\@gobble}
+\end{verbatim}
+\end{code}
+(New v4.3)         Here some things have changed for v4.3. 
+The previous ~#1~ has been replaced by ~\@gobble~. 
+Ensuing, the ~\linelabel~ error message is re-implemented. 
+I find it difficult to compare efficiency of slight 
+alternatives---so choose an easy one. Explicit switching 
+in ~\linenumbers~ and ~\nolinenumbers~ is an additional 
+command that may better be avoided. 
+\begin{code}\begin{verbatim}
+\newcommand\linelabel{% 
+  \ifLineNumbers \expandafter \@LN@linelabel 
+  \else          \expandafter \@LN@LLerror   \fi}
+ 
+\gdef\@LN@linelabel#1{% 
+\end{verbatim}
+\end{code}
+~\gdef~ for hyperref ``symbolically''. (/New v4.11) 
+\begin{code}\begin{verbatim}
+  \ifx\protect\@typeset@protect 
+\end{verbatim}
+\end{code}
+$\gets$ And a ~\linelabel~ should never be replicated in a 
+mark or a TOC entry.                           (/New v4.3) 
+\begin{code}\begin{verbatim}
+   \ifvmode
+       \ifinner \else 
+          \leavevmode \@bsphack \@savsk\p@
+       \fi
+   \else
+       \@bsphack
+   \fi
+   \ifhmode
+     \ifinner
+       \@parmoderr
+     \else
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{code}\begin{verbatim}
+       \@LN@postlabel{#1}% 
+\end{verbatim}
+\end{code}
+\begin{old}\begin{verbatim}
+%        \@floatpenalty -\@Mii
+%        \@next\@currbox\@freelist
+%            {\global\count\@currbox-2%
+%             \expandafter\gdef\csname @LNL@\the\@currbox\endcsname{#1}}%
+%            {\@floatpenalty\z@ \@fltovf \def\@currbox{\@tempboxa}}%
+%        \begingroup
+%            \setbox\@currbox \color@vbox \vbox \bgroup \end@float
+%        \endgroup
+%        \@ignorefalse \@esphack
+\end{verbatim}
+\end{old} 
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+       \@esphack 
+\end{verbatim}
+\end{code}
+(New v4.00) 
+The ~\@ignorefalse~ was appropriate before because the 
+~\@Esphack~ in ~\end@float~ set ~\@ignoretrue~. Cf._\LaTeX's 
+~\@xympar~. (/New v4.00) 
+\begin{code}\begin{verbatim}
+     \fi
+   \else
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{code}\begin{verbatim}
+     \@LN@mathhook{#1}%
+\end{verbatim}
+\end{code}
+\begin{old}\begin{verbatim}
+%     \@parmoderr
+\end{verbatim}
+\end{old} 
+Instead of complaining, you may just do your job. 
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+   \fi
+  \fi 
+   }
+\end{verbatim}
+\end{code}
+(New v4.00)   The shorthand just does what happened 
+with ~linenox0.sty~ before ~ednmath0.sty~ (New v4.1: 
+now ~mathrefs~ option) appeared, and 
+the hook is initialized to serve the same purpose. 
+So errors come just where Stephan had built them in, 
+and this is just the \LaTeX\ ~\marginpar~ behaviour. 
+\begin{code}\begin{verbatim}
+\def\@LN@postlabel#1{\g@addto@macro\@LN@labellist{#1\@lt}%
+       \vadjust{\penalty-\@Mllbcodepen}} 
+\def\@LN@mathhook#1{\@parmoderr}
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+
+\modulolinenumbers[3] 
+\firstlinenumber{1}
+\section{%
+The appearance of the line numbers
+\unskip}\label{appearance}
+\subsection{%
+Basic code                             %% own subsec. v4.2. 
+\unskip}
+
+The line numbers are set as ~\tiny\sffamily\arabic{linenumber}~,
+$10pt$ left of the text.  With options to place it
+right of the text, or . . .
+
+. . . here are the hooks:
+\begin{code}\begin{verbatim}
+\def\makeLineNumberLeft{% 
+  \hss\linenumberfont\LineNumber\hskip\linenumbersep}
+ 
+\def\makeLineNumberRight{% 
+  \linenumberfont\hskip\linenumbersep\hskip\columnwidth
+  \hb@xt@\linenumberwidth{\hss\LineNumber}\hss}
+ 
+\def\linenumberfont{\normalfont\tiny\sffamily}
+ 
+\newdimen\linenumbersep
+\newdimen\linenumberwidth
+ 
+\linenumberwidth=10pt
+\linenumbersep=10pt
+\end{verbatim}
+\end{code}
+Margin switching requires ~pagewise~ numbering mode, but
+choosing the left or right margin for the numbers always
+works. 
+\begin{code}\begin{verbatim}
+\def\switchlinenumbers{\@ifstar
+    {\let\makeLineNumberOdd\makeLineNumberRight
+     \let\makeLineNumberEven\makeLineNumberLeft}%
+    {\let\makeLineNumberOdd\makeLineNumberLeft
+     \let\makeLineNumberEven\makeLineNumberRight}%
+    }
+ 
+\def\setmakelinenumbers#1{\@ifstar
+  {\let\makeLineNumberRunning#1%
+   \let\makeLineNumberOdd#1%
+   \let\makeLineNumberEven#1}%
+  {\ifx\c@linenumber\c@runninglinenumber
+      \let\makeLineNumberRunning#1%
+   \else
+      \let\makeLineNumberOdd#1%
+      \let\makeLineNumberEven#1%
+   \fi}%
+  }
+ 
+\def\leftlinenumbers{\setmakelinenumbers\makeLineNumberLeft}
+\def\rightlinenumbers{\setmakelinenumbers\makeLineNumberRight}
+ 
+\leftlinenumbers*
+\end{verbatim}
+\end{code}
+~\LineNumber~ is a hook which is used for the modulo stuff.
+It is the command to use for the line number, when you
+customize ~\makeLineNumber~.  Use ~\thelinenumber~ to
+change the outfit of the digits.
+
+
+We will implement two modes of operation:
+\begin{itemize}
+\item  numbers ~running~ through (parts of) the text
+\item  ~pagewise~ numbers starting over with one on top of
+each page.
+\end{itemize}
+Both modes have their own count register, but only one is
+allocated as a \LaTeX\ counter, with the attached
+facilities serving both.
+\begin{code}\begin{verbatim}
+\newcounter{linenumber}
+\newcount\c@pagewiselinenumber
+\let\c@runninglinenumber\c@linenumber
+\end{verbatim}
+\end{code}
+Only the running mode counter may be reset, or preset,
+for individual paragraphs.  The pagewise counter must
+give a unique anonymous number for each line.
+
+(New v4.3)                  ~\newcounter{linenumber}~ 
+was the only ~\newcounter~ in the whole package, and 
+formerly I was near using ~\newcount~ instead. Yet 
+~\newcounter~ may be quite useful for ~\includeonly~. 
+It also supports resetting ``subcounters'', but what 
+could these be? Well, ~edtable~ might introduce a 
+subcounter for columns. 
+(Note that \LaTeX's setting commands would work with 
+~\newcount\c@linenumber~ already, apart from this. 
+And perhaps sometimes ~\refstepcounter{linenumber}~ 
+wouldn't work---cf._my discussion of ~\stepcounter~ in 
+subsection_\ref{ss:MLN}, similarly ~\refstep...~ would 
+be quite useless. 
+Even the usual redefinitions of ~\thelinenumber~ would 
+work. It is nice, on the other hand, that 
+~\thelinenumber~ is predefined here. \LaTeX's 
+initialization of the value perhaps just serves making 
+clear \LaTeX\ counters should always be changed 
+globally.---Shortened and improved the discussion here.) 
+(/New v4.3) 
+
+(New v4.22) 
+~\c@linenumber~ usually is---globally---incremented by 
+~\stepcounter~ (at present), so resetting it locally would 
+raise the save stack problem of \TeX book p._301, moreover 
+it would be is useless, there is no hope of keeping the 
+values local (but see subsection_\ref{ss:ILN}). So I insert 
+~\global~:        (/New v4.22) 
+\begin{code}\begin{verbatim}
+\newcommand*\resetlinenumber[1][\@ne]{% 
+  \global                             % v4.22
+  \c@runninglinenumber#1\relax}
+\end{verbatim}
+\end{code}
+(New v4.00) 
+\begin{old}\begin{verbatim}
+% \newcommand\resetlinenumber[1][1]{\c@runninglinenumber#1}
+\end{verbatim}
+\end{old}
+Added ~\relax~, being quite sure that this does no harm 
+and is quite important, as with ~\setcounter~ etc. 
+I consider this a bug fix (although perhaps no user has 
+ever had a problem with this).    (/New v4.00) 
+
+(v4.22: I had made much fuss about resetting subordinate 
+counters here---removed, somewhat postponed.)
+
+
+\subsection{%
+Running line numbers
+\unskip} 
+
+Running mode is easy,  ~\LineNumber~ and ~\theLineNumber~
+produce ~\thelinenumber~, which defaults to
+~\arabic{linenumber}~, using the ~\c@runninglinenumber~
+counter.  This is the default mode of operation.
+\begin{code}\begin{verbatim}
+\def\makeRunningLineNumber{\makeLineNumberRunning}
+ 
+\def\setrunninglinenumbers{%
+   \def\theLineNumber{\thelinenumber}%
+   \let\c@linenumber\c@runninglinenumber
+   \let\makeLineNumber\makeRunningLineNumber
+   }
+ 
+\setrunninglinenumbers\resetlinenumber
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Pagewise line numbers
+\unskip}\label{ss:PW} 
+
+Difficult, if you think about it.  The number has to be
+printed when there is no means to know on which page it
+will end up,  except through the aux-file.  My solution  
+is really expensive, but quite robust.  
+
+With version ~v2.00~ the hashsize requirements are
+reduced, because we do not need one controlsequence for
+each line any more.  But this costs some computation time
+to find out on which page we are.
+
+~\makeLineNumber~ gets a hook to log the line and page
+number to the aux-file.  Another hook tries to find out
+what the page offset is, and subtracts it from the counter
+~\c@linenumber~.  Additionally, the switch
+~\ifoddNumberedPage~ is set true for odd numbered pages,
+false otherwise.
+\begin{code}\begin{verbatim}
+\def\setpagewiselinenumbers{%
+   \let\theLineNumber\thePagewiseLineNumber
+   \let\c@linenumber\c@pagewiselinenumber
+   \let\makeLineNumber\makePagewiseLineNumber
+   }
+ 
+\def\makePagewiseLineNumber{\logtheLineNumber\getLineNumber
+  \ifoddNumberedPage
+     \makeLineNumberOdd
+  \else
+     \makeLineNumberEven
+  \fi
+  }
+\end{verbatim}
+\end{code}
+Each numbered line gives a line to the aux file
+\begin{verse}
+~\@LN{~<line>~}{~<page>~}~
+\end{verse}
+very similar to the ~\newlabel~ business, except that we need
+an arabic representation of the page number, not what
+there might else be in ~\thepage~.
+\begin{code}\begin{verbatim}
+\def\logtheLineNumber{\protected@write\@auxout{}{%
+\end{verbatim}
+\end{code}
+(New v4.00) (UL)
+As Daniel Doherty observed, the earlier line 
+\begin{old}\begin{verbatim}
+%    \string\@LN{\the\c@linenumber}{\noexpand\the\c@page}}}
+\end{verbatim}
+\end{old}
+here may lead into an infinite loop when the user resets 
+the page number (think of ~\pagenumbering~, e.g.). 
+Stephan and I brief\/ly discussed the matter and decided 
+to introduce a ``physical''-page counter to which 
+~\logtheLineNumber~ refers. It was Stephan's idea to use 
+~\cl@page~ for reliably augmenting the ``physical''-page 
+counter. However, this relies on the output routine once 
+doing ~\stepcounter{page}~. Before Stephan's 
+suggestion, I had thought of appending the stepping to 
+\LaTeX's ~\@outputpage~.---So the macro definition ends 
+as follows. 
+\begin{code}\begin{verbatim}
+   \string\@LN{\the\c@linenumber}{% 
+\end{verbatim}
+\end{code}
+(New v4.2) 
+The `truepage' counter must start with ~\c@~ so it works 
+with ~\include~, and the ~\@addtoreset~ below is needed 
+for the same purpose. 
+\begin{code}\begin{verbatim}
+     \noexpand\the\c@LN@truepage}}} 
+ 
+\newcount\c@LN@truepage 
+\g@addto@macro\cl@page{\global\advance\c@LN@truepage\@ne}
+\@addtoreset{LN@truepage}{@ckpt}
+\end{verbatim}
+\end{code}
+(/New v4.2)                I had thought of offering more 
+features of a \LaTeX\ counter. However, the user should 
+better \emph{not} have access to this counter. ~\c@page~ 
+should suffice as a pagewise master counter.---To be sure, 
+along the present lines the user \emph{can} manipulate 
+~\c@LN@truepage~ by ~\stepcounter{page}~. E.g., she might 
+do this in order to manually insert a photograph. Well, 
+seems not to harm. 
+
+The above usage of ~\g@addto@macro~ and ~\cl@page~ may be 
+not as stable as Stephan intended. His proposal used 
+~\xdef~ directly. But he used ~\cl@page~ as well, and who 
+knows \dots{} And as to ~\g@addto@macro~, I have introduced 
+it for list macros anyway. 
+(/UL) (/New v4.00) 
+
+From the aux-file we get one macro ~\LN@P~<page> for each
+page with line numbers on it.  This macro calls four other
+macros with one argument each.  These macros are
+dynamically defined to do tests and actions, to find out
+on which page the current line number is located.
+
+We need sort of a pointer to the first page with line
+numbers, initiallized to point to nothing:
+\begin{code}\begin{verbatim}
+\def\LastNumberedPage{first} 
+\def\LN@Pfirst{\nextLN\relax}
+\end{verbatim}
+\end{code}
+The four dynamic macros are initiallized to reproduce
+themselves in an ~\xdef~
+\begin{code}\begin{verbatim}
+\let\lastLN\relax  % compare to last line on this page
+\let\firstLN\relax % compare to first line on this page
+\let\pageLN\relax  % get the page number, compute the linenumber
+\let\nextLN\relax  % move to the next page
+\end{verbatim}
+\end{code}
+During the end-document run through the aux-files, we
+disable ~\@LN~.  I may put in a check here later, to give
+a rerun recommendation.  
+\begin{code}\begin{verbatim}
+\AtEndDocument{\let\@LN\@gobbletwo}
+\end{verbatim}
+\end{code}
+Now, this is the tricky part.  First of all, the whole
+definition of ~\@LN~ is grouped, to avoid accumulation
+on the save stack. Somehow ~\csname~<cs>~\endcsname~ pushes
+an entry, which stays after an ~\xdef~ to that <cs>.
+
+If ~\LN@P~<page> is undefined, initialize it with the
+current page and line number, with the
+\emph{pointer-to-the-next-page} pointing to nothing.  And
+the macro for the previous page will be redefined to point
+to the current one. 
+
+If the macro for the current page already exists, just
+redefine the \emph{last-line-number} entry.
+
+Finally, save the current page number, to get the pointer to the
+following page later.
+\begin{code}\begin{verbatim}
+\def\@LN#1#2{{\expandafter\@@LN
+                 \csname LN@P#2C\@LN@column\expandafter\endcsname
+                 \csname LN@PO#2\endcsname
+                 {#1}{#2}}}
+ 
+\def\@@LN#1#2#3#4{\ifx#1\relax
+    \ifx#2\relax\gdef#2{#3}\fi
+    \expandafter\@@@LN\csname LN@P\LastNumberedPage\endcsname#1% 
+    \xdef#1{\lastLN{#3}\firstLN{#3}% 
+            \pageLN{#4}{\@LN@column}{#2}\nextLN\relax}%
+  \else
+    \def\lastLN##1{\noexpand\lastLN{#3}}%
+    \xdef#1{#1}%
+  \fi
+  \xdef\LastNumberedPage{#4C\@LN@column}}
+\end{verbatim}
+\end{code}
+The previous page macro gets its pointer to the
+current one, replacing the ~\relax~ with the cs-token
+~\LN@P~<page>.  
+\begin{code}\begin{verbatim}
+\def\@@@LN#1#2{{\def\nextLN##1{\noexpand\nextLN\noexpand#2}%
+                \xdef#1{#1}}}
+\end{verbatim}
+\end{code}
+Now, to print a line number, we need to find the page,
+where it resides.  This will most probably be the page where
+the last one came from, or maybe the next page.  However, it can
+be a completely different one.  We maintain a cache,
+which is ~\let~ to the last page's macro.  But for now
+it is initialized to expand ~\LN@first~, where the poiner
+to the first numbered page has been stored in. 
+\begin{code}\begin{verbatim}
+\def\NumberedPageCache{\LN@Pfirst}
+\end{verbatim}
+\end{code}
+To find out on which page the current ~\c@linenumber~ is, 
+we define the four dynamic macros to do something usefull
+and execute the current cache macro.  ~\lastLN~ is run
+first, testing if the line number in question may be on a
+later page.  If so, disable ~\firstLN~, and go on to the
+next page via ~\nextLN~.
+\begin{code}\begin{verbatim}
+\def\testLastNumberedPage#1{\ifnum#1<\c@linenumber
+      \let\firstLN\@gobble
+  \fi}
+\end{verbatim}
+\end{code}
+Else, if ~\firstLN~ finds out that we need an earlier
+page,  we start over from the beginning. Else, ~\nextLN~
+will be disabled, and ~\pageLN~ will run
+~\gotNumberedPage~ with four arguments: the first line
+number on this column, the page number, the column 
+number, and the first line on the page.
+\begin{code}\begin{verbatim}
+\def\testFirstNumberedPage#1{\ifnum#1>\c@linenumber
+     \def\nextLN##1{\testNextNumberedPage\LN@Pfirst}%
+  \else
+      \let\nextLN\@gobble
+      \def\pageLN{\gotNumberedPage{#1}}%
+  \fi}
+\end{verbatim}
+\end{code}
+We start with ~\pageLN~ disabled and ~\nextLN~ defined to
+continue the search with the next page.
+\begin{code}\begin{verbatim}
+\long\def \@gobblethree #1#2#3{}
+ 
+\def\testNumberedPage{%
+  \let\lastLN\testLastNumberedPage
+  \let\firstLN\testFirstNumberedPage
+  \let\pageLN\@gobblethree
+  \let\nextLN\testNextNumberedPage
+  \NumberedPageCache
+  }
+\end{verbatim}
+\end{code}
+When we switch to another page, we first have to make
+sure that it is there.  If we are done with the last 
+page, we probably need to run \TeX\ again, but for the
+rest of this run, the cache macro will just return four
+zeros. This saves a lot of time, for example if you have
+half of an aux-file from an aborted run,  in the next run
+the whole page-list would be searched in vain again and
+again for the second half of the document.
+
+If there is another page, we iterate the search. 
+\begin{code}\begin{verbatim}
+\def\testNextNumberedPage#1{\ifx#1\relax
+     \global\def\NumberedPageCache{\gotNumberedPage0000}%
+     \PackageWarningNoLine{lineno}%
+                    {Linenumber reference failed,
+      \MessageBreak  rerun to get it right}%
+   \else
+     \global\let\NumberedPageCache#1%
+   \fi
+   \testNumberedPage
+   }
+\end{verbatim}
+\end{code}
+\linelabel{demo2}
+\marginpar{\tiny\raggedright
+Let's see if it finds the label
+on page \pageref{demo}, 
+line \ref{demo}, and back here
+on page \pageref{demo2}, line
+\ref{demo2}. 
+\unskip}%
+To separate the official hooks from the internals there is
+this equivalence, to hook in later for whatever purpose:
+\begin{code}\begin{verbatim}
+\let\getLineNumber\testNumberedPage
+\end{verbatim}
+\end{code}
+So, now we got the page where the number is on.  We
+establish if we are on an odd or even page, and calculate
+the final line number to be printed.
+\begin{code}\begin{verbatim}
+\newif\ifoddNumberedPage
+\newif\ifcolumnwiselinenumbers
+\columnwiselinenumbersfalse
+ 
+\def\gotNumberedPage#1#2#3#4{\oddNumberedPagefalse
+  \ifodd \if@twocolumn #3\else #2\fi\relax\oddNumberedPagetrue\fi
+  \advance\c@linenumber\@ne 
+  \ifcolumnwiselinenumbers
+     \subtractlinenumberoffset{#1}%
+  \else
+     \subtractlinenumberoffset{#4}%
+  \fi
+  }
+\end{verbatim}
+\end{code}
+You might want to run the pagewise mode with running line
+numbers, or you might not.  It's your choice:
+\begin{code}\begin{verbatim}
+\def\runningpagewiselinenumbers{%
+  \let\subtractlinenumberoffset\@gobble
+  }
+ 
+\def\realpagewiselinenumbers{%
+  \def\subtractlinenumberoffset##1{\advance\c@linenumber-##1\relax}%
+  }
+ 
+\realpagewiselinenumbers
+\end{verbatim}
+\end{code}
+For line number references, we need a protected call to
+the whole procedure, with the requested line number stored
+in the ~\c@linenumber~ counter.  This is what gets printed
+to the aux-file to make a label:
+\begin{code}\begin{verbatim}
+\def\thePagewiseLineNumber{\protect 
+       \getpagewiselinenumber{\the\c@linenumber}}%
+\end{verbatim}
+\end{code}
+And here is what happens when the label is refered to:
+\begin{code}\begin{verbatim}
+\def\getpagewiselinenumber#1{{%
+  \c@linenumber #1\relax\testNumberedPage
+  \thelinenumber
+  }}
+\end{verbatim}
+\end{code}
+%
+A summary of all per line expenses:
+\begin{description}\item
+[CPU:]  The ~\output~ routine is called for each line,
+and the page-search is done.
+\item
+[DISK:] One line of output to the aux-file for each
+numbered line
+\item
+[MEM:]  One macro per page. Great improvement over v1.02,
+which had one control sequence per line in
+addition.  It blew the hash table after some five
+thousand lines. 
+\end{description}
+
+\subsection{%
+Twocolumn mode (New v3.06)
+\unskip}
+
+Twocolumn mode requires another patch to the ~\output~ 
+routine, in order to print a column tag to the .aux 
+file.
+\begin{code}\begin{verbatim}
+\AtBeginDocument{% v4.2, revtex4.cls (e.g.). 
+ % <- TODO v4.4+: Or better in \LineNoLaTeXOutput!? 
+  \let\@LN@orig@makecol\@makecol} 
+\def\@LN@makecol{%
+   \@LN@orig@makecol
+   \setbox\@outputbox \vbox{%
+      \boxmaxdepth \@maxdepth
+      \protected@write\@auxout{}{% 
+          \string\@LN@col{\if@firstcolumn1\else2\fi}%
+      }%
+      \box\@outputbox 
+   }% \vbox
+} %% TODO cf. revtexln.sty. 
+ 
+\def\@LN@col{\def\@LN@column} % v4.22, removed #1. 
+\@LN@col{1}
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Numbering modulo $m$, starting at $f$ 
+\unskip}\label{ss:Mod} 
+
+Most users want to have only one in five lines numbered.
+~\LineNumber~ is supposed to produce the outfit of the
+line number attached to the line,  while ~\thelinenumber~
+is used also for references, which should appear even if
+they are not multiples of five.   
+
+(New v4.00)                   Moreover, some users want to 
+control which line number should be printed first. Support 
+of this is now introduced here---see ~\firstlinenumber~ 
+below.---~numline.sty~ by Michael Jaegermann and 
+James Fortune offers controlling which \emph{final} 
+line numbers should not be printed. What is 
+it good for? We ignore this here until some user demands 
+it.---Peter Wilson's ~ledmac.sty~ offers much different 
+choices of line numbers to be printed, due to Wayne Sullivan. 
+(/New v4.00) 
+
+(New v4.22)   ~\c@linenumbermodulo~ is rendered a 
+fake counter, as discussed since v4.00. So it can 
+no longer be set by ~\setcounter~. ~\modulolinenumbers~ 
+serves this purpose. Well, does anybody want to do 
+what worked with ~\addtocounter~? (Then please tell 
+me.)---At least, ~\value~ still works. For the same 
+purpose I rename the fake `firstlinenumber' counter 
+~\n@...~ to ~\c@...~.                  (/New v4.22) 
+\begin{old}\begin{verbatim}
+% \newcount\c@linenumbermodulo % removed for v4.22 
+\end{verbatim}
+\end{old}
+
+
+(New v4.00)                                                             \par 
+~\themodulolinenumber~ waits for being declared 
+~\LineNumber~ by ~\modulolinenumbers~. (This has 
+been so before, no change.) Here is how it 
+looked before: 
+\begin{old}\begin{verbatim}
+% \def\themodulolinenumber{{\@tempcnta\c@linenumber
+%   \divide\@tempcnta\c@linenumbermodulo
+%   \multiply\@tempcnta\c@linenumbermodulo
+%   \ifnum\@tempcnta=\c@linenumber\thelinenumber\fi
+%   }}
+\end{verbatim}
+\end{old} 
+(UL)                   This was somewhat slow. This arithmetic 
+happens at every line. This time I tend to declare an extra 
+line counter (as opposed to my usual recommendations to use 
+counters as rarely as possible) which is stepped every line. 
+It could be incremented in the same way as ~\c@LN@truepage~ 
+is incremented via ~\cl@page~! This is another point in favour 
+of ~{linenumber}~ being a \LaTeX\ counter! 
+When this new counter equals ~\c@linenumbermodulo~, it is reset, 
+and ~\thelinenumber~ is executed.---It gets much slower by my 
+support of controlling the first line number below. I should 
+improve this.---On
+the other hand, time expense means very little nowadays, 
+while the number of \TeX\ counters still is limited. 
+
+For the same purpose, moreover, attaching the line number 
+box could be intercepted earlier (in ~\MakeLineNo~), 
+without changing ~\LineNumber~. However, this may be 
+bad for the latter's announcement as a wizard interface 
+in section_\ref{s:UserCmds}.
+(/UL) 
+
+Here is the new code. It is very near to my ~lnopatch.sty~ 
+code which introduced the first line number feature 
+before.---I add starting with a ~\relax~ which is so often 
+recommended---without understanding this really. At least, 
+it will not harm.---Former group braces appear as 
+~\begingroup~/~\endgroup~ here. 
+\begin{code}\begin{verbatim}
+\def\themodulolinenumber{\relax
+  \ifnum\c@linenumber<\c@firstlinenumber \else 
+    \begingroup 
+      \@tempcnta\c@linenumber
+      \advance\@tempcnta-\c@firstlinenumber 
+      \divide\@tempcnta\c@linenumbermodulo
+      \multiply\@tempcnta\c@linenumbermodulo
+      \advance\@tempcnta\c@firstlinenumber 
+      \ifnum\@tempcnta=\c@linenumber \thelinenumber \fi
+    \endgroup 
+  \fi 
+}
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+
+The user command to set the modulo counter:
+(New v4.31) \dots\ a star variant is introduced to implement 
+Hillel Chayim Yisraeli's idea to print the first line number 
+after an interruption of the edited text by some editor's 
+text, regardless of the modulo. If it is 1, it is printed only 
+with ~\firstlinenumber{1}~. I.e., you use ~\modulolinenumbers*~
+for the new feature, without the star you get the simpler 
+behaviour that we have had so far. And you can switch back 
+from the refined behaviour to the simple one by using 
+~\modulolinenumbers~ without the star.---This enhancement 
+is accompanied by a new package option ~modulo*~ which just 
+executes ~\modulolinenumbers*~ 
+(subsection_\ref{ss:v3opts}).---`With ~\firstlinenumber{1}~' 
+exactly means: `1' is printed if and only if the last 
+~\firstlinenumber~ before or in the paragraph that follows 
+the ``interruption'' has argument `1' (or something 
+\emph{expanding} to `1', or (to) something that \TeX\ 
+``reads'' as 1, e.g.: a \TeX\ count register storing 
+1).---At present, this behaviour may be unsatisfactory with 
+pagewise line-numbering $\dots$ I'll make an experimental 
+extra package if someone complains \dots
+\begin{code}\begin{verbatim}
+\newcommand\modulolinenumbers{% 
+  \@ifstar
+    {\def\@LN@maybe@moduloresume{% 
+       \global\let\@LN@maybe@normalLineNumber
+                            \@LN@normalLineNumber}% 
+                                       \@LN@modulolinenos}% 
+    {\let\@LN@maybe@moduloresume\relax \@LN@modulolinenos}%
+}
+ 
+\global\let\@LN@maybe@normalLineNumber\relax 
+\let\@LN@maybe@moduloresume\relax 
+\gdef\@LN@normalLineNumber{% 
+  \ifnum\c@linenumber=\c@firstlinenumber \else 
+    \ifnum\c@linenumber>\@ne
+      \def\LineNumber{\thelinenumber}% 
+    \fi 
+  \fi 
+\end{verbatim}
+\end{code}
+~\def~ instead of ~\let~ enables taking account of a 
+redefinition of ~\thelinenumber~ in a present numbering 
+environment (e.g.). 
+\begin{code}\begin{verbatim}
+  \global\let\@LN@maybe@normalLineNumber\relax}
+\end{verbatim}
+\end{code}
+Instead of changing ~\LineNumber~ directly by 
+~LN@moduloresume~, these tricks enable ~\modulolinenumbers*~
+to act as locally as I can make it. I don't know how to 
+avoid that the output routine switches back to the normal 
+modulo behaviour by a global change. (An ~\aftergroup~ may 
+fail in admittedly improbable cases.)
+\begin{code}\begin{verbatim}
+\newcommand*\@LN@modulolinenos[1][\z@]{%
+\end{verbatim}
+\end{code}
+The definition of this macro is that of the former 
+~\modulolinenumbers~.                 (/New v4.31) 
+\begin{code}\begin{verbatim}
+  \let\LineNumber\themodulolinenumber
+  \ifnum#1>\@ne 
+    \chardef                      % v4.22, note below 
+      \c@linenumbermodulo#1\relax
+  \else\ifnum#1=\@ne 
+\end{verbatim}
+\end{code}
+\begin{old}\begin{verbatim}
+%    \def\LineNumber{\thelinenumber}%
+\end{verbatim}
+\end{old} 
+(New v4.00)         I am putting something here to enable 
+~\firstlinenumber~ with $~\c@linenumbermodulo~=1$. 
+With ~lnopatch.sty~, a trick was offered for this purpose. 
+It is now obsolete. 
+
+\begin{code}\begin{verbatim}
+    \def\LineNumber{\@LN@ifgreat\thelinenumber}% 
+\end{verbatim}
+\end{code}
+(/New v4.00) 
+\begin{code}\begin{verbatim}
+  \fi\fi
+  }
+\end{verbatim}
+\end{code}
+(New v4.00)                The default of ~\@LN@ifgreat~ is 
+\begin{code}\begin{verbatim}
+\let\@LN@ifgreat\relax
+\end{verbatim}
+\end{code}
+The previous changes as soon as ~\firstlinenumber~ is used: 
+\begin{code}\begin{verbatim}
+\newcommand*\firstlinenumber[1]{% 
+  \chardef\c@firstlinenumber#1\relax 
+\end{verbatim}
+\end{code}
+No counter, little values allowed only---OK?---(UL) 
+The change is local---OK? The good thing is that 
+~\global\firstlinenumber{~<number>~}~ works. Moreover, 
+~\modulolinenumbers~ acts locally as well.    (/UL)
+
+(New v4.31) 
+\begin{code}\begin{verbatim}
+  \let\@LN@ifgreat\@LN@ifgreat@critical} 
+ 
+\def\@LN@ifgreat@critical{%
+  \ifnum\c@linenumber<\c@firstlinenumber 
+    \expandafter \@gobble 
+  \fi}% 
+\end{verbatim}
+\end{code}
+(/New v4.31) 
+
+The default 
+value of ~\c@firstlinenumber~                                %% v4.31 
+is 0. This is best for what one would expect from modulo 
+printing. 
+\begin{code}\begin{verbatim}
+\let\c@firstlinenumber=\z@
+\end{verbatim}
+\end{code}
+
+For usage and effects of ~\modulolinenumbers~ and            %% v4.31 
+~\firstlinenumbers~, please consult section_\ref{s:UserCmds}. 
+Two details on ~\firstlinenumbers~ here: 
+(i)_~\firstlinenumber~ acts on a paragraph if and only if 
+(a)_the paragraph is broken into lines ``in line-numbering 
+mode'' (after ~\linenumbers~, e.g.); 
+(b)_it is the last occurrence of a ~\firstlinenumbers~ 
+before or in the paragraph. 
+(The practical applications of this that I can imagine 
+don't seem appealing to me.) 
+Cf._the explanation above of how ~\modulolinenumbers~ and 
+~\firstlinenumbers~ interact---for this and for (ii), 
+which is concerned with possible arguments for 
+~\firstlinenumbers~. 
+
+Note that the line numbers of the present section 
+demonstrate the two devices.         (/New v4.00) 
+\begin{code}\begin{verbatim}
+\chardef\c@linenumbermodulo=5      % v4.2; ugly? 
+\modulolinenumbers[1]
+\end{verbatim}
+\end{code}
+(New v4.22)       The new implementation through ~\chardef~ 
+decreases the functionality and raises certain compatibility 
+problems. I face this without fear. The maximum modulo value 
+is now ~255~. I expect that this suffices for usual applications. 
+However, some users have ``abused'' ~lineno.sty~ to get 
+~ednotes.sty~ features without line numbers, so have set the 
+modulo to a value beyond the total number of lines in their 
+edition. This ought to be replaced by 
+~\let\makeLineNumber\relax~.          (/New v4.22) 
+
+\section{% 
+Package options
+\unskip}\label{s:Opts} 
+
+(New v4.1) 
+The last heading formerly was the heading of what is now 
+subsection_\ref{ss:v3opts}. The options declared there were 
+said to execute user commands only. This was wrong already 
+concerning ~displaymath~ and ~hyperref~. At least, however, 
+these options were no or almost no occasion to skip definitions 
+or allocations. This is different with the options that we now 
+insert. 
+
+
+\subsection{%
+Extended referencing to line numbers. (v4.2)
+\unskip}
+This subsection explains and declares package option ~addpageno~.   %% v4.31
+
+If a line to whose number you refer by ~\ref~ is not on the 
+present page, it may be useful to add the number of the page 
+on which the line occurs---and perhaps it should not be added 
+otherwise. In general, you could use the Standard \LaTeX\ 
+package varioref for this. However, the latter usually 
+produces verbose output like `on the preceding page'---
+unless costumized---, while in critical editions, e.g., one 
+may prefer just adding the page number and some mark on the 
+left of the line number, irrespectively of how far the page is 
+apart etc. To support this, package option ~addpageno~ 
+provides a command ~\vpagelineref~ to be used in place of 
+~\ref~. This produces, e.g., `34.15' when referring to line_15 
+on page_34 while the present page is not 34. You can customize 
+the outcome, see the package file ~vplref.sty~ where the code 
+and further details are. You may conceive of 
+~\vpagelineref~ as a certain customization of varioref's 
+~\vref~. 
+
+This implies that option ~addpageno~ requires the files 
+~vplref.sty~ and ~varioref.sty~. ~addpageno~ automatically 
+loads both of them. Yet you can also load ~varioref.sty~ 
+on your own to use its package options. 
+
+Of course, you might better introduce a shorter command name 
+for ~\vpagelineref~ for your work, while we cannot predict 
+here what shorthand will fit your work. E.g., 
+~\newcommand{\lref}{\vpagelineref}~.
+
+If you really want to add the page number in \emph{any} case, 
+use, e.g., some ~\myref~ instead of ~\ref~, after 
+\[~newcommand*{\myref}{\pageref{#1}.\ref{#1}}~\] 
+or what you like. You don't need the ~addpageno~ option in 
+this case. 
+
+~addpageno~ is due to a suggestion by Sergei Mariev. 
+\begin{code}\begin{verbatim}
+\DeclareOption{addpageno}{% 
+  \AtEndOfPackage{\RequirePackage{vplref}[2005/04/25]}} 
+\end{verbatim}
+\end{code}
+\subsection{% 
+\scs{linelabel} in math mode 
+\unskip}\label{ss:MathRef}
+
+We have made some first steps towards allowing ~\linelabel~ in 
+math mode. Because our code for this is presently experimental, 
+we leave it to the user to decide for the experiment by calling 
+option ~mathrefs~. We are in a hurry now and thus leave the 
+code, explanations, and discussion in the separate package 
+~ednmath0.sty~. Maybe we later find the time to improve the 
+code and move the relevant content of ~ednmath0.sty~ to here. 
+The optimal situation would be to define ~\linelabel~ from 
+the start so it works in math mode, omitting the ~mathrefs~ 
+option. 
+
+Actually, this package even provides adjustments for analogously 
+allowing ~ednotes.sty~ commands in math mode. Loading the package 
+is postponed to ~\AtBeginDocument~ when we know whether these 
+adjustments are needed. 
+\begin{code}\begin{verbatim}
+\DeclareOption{mathrefs}{\AtBeginDocument 
+  {\RequirePackage{ednmath0}[2004/08/20]}} 
+\end{verbatim}
+\end{code}
+
+\subsection{% 
+Arrays, tabular environments (Revised v4.11)
+\unskip}\label{ss:Tab} 
+
+This subsection explains and declares package options               %% v4.31
+~edtable~, ~longtable~, and ~nolongtablepatch~.
+
+The standard \LaTeX\ tabular environments come as single 
+boxes, so the ~lineno.sty~ versions before v4.00 treated them as 
+(parts of) single lines, printing (at most) one line number 
+beside each and stepping the line number counter once only. 
+Moreover, ~\linelabel~s got lost. Of course, tables are 
+usually so high that you will want to treat each row like a 
+line. (Christian Tapp even desires that the lines of table 
+entries belonging to a single row are treated like ordinary 
+lines.) Footnotes get lost in such environments as well, which 
+was bad for ~ednotes.sty~.
+
+We provide adjustments to count lines, print their numbers 
+etc.\ as desired at least for \emph{some} \LaTeX\ tabular 
+environments. (Like with other details, ``some'' is to some 
+extent explained in ~edtable.sty~.) We do this similarly as 
+with option ~mathrefs~ before.               We leave code 
+and explanations in the separate package ~edtable.sty~. 
+(For wizards: this package provides adjustments for 
+~ednotes.sty~ as well. However, in the present case we don't try 
+to avoid them unless ~ednotes.sty~ is loaded.) 
+Package option ~edtable~ 
+defines---by loading ~edtable.sty~---an environment ~{edtable}~ 
+which is able to change some \LaTeX\ tabular environments 
+with the desired effects. (v4.11: ~edtable.sty~ v1.3 counts 
+\LaTeX's ~{array}~ [etc.\@] as a ``tabular environment'' as 
+well.) 
+
+The ~{edtable}~ environment doesn't help with ~longtable.sty~, 
+however. To make up for this, ~{longtable}~ is adjusted in a 
+different way---and this happens only when another ~lineno.sty~ 
+option ~longtable~ is called. In this case, option ~edtable~ 
+needn't be called explicitly: option ~longtable~ works as if 
+~edtable~ had been called. 
+
+Now, we are convinced that vertical spacing around 
+~{longtable}~ works wrongly---see \LaTeX\ bugs database 
+tools/3180 and 3485, or see explanations in the package 
+~ltabptch.sty~ (which is to be obtained from CTAN folder
+\path{macros/latex/ltabptch}). Our conviction is so strong
+that the ~longtable~ option loads---after ~longtable.sty~---the
+patch package ~ltabptch.sty~. If the user doesn't want this
+(maybe preferring her own arrangement with the vertical 
+spacing), she can forbid it by calling ~nolongtablepatch~. 
+
+The following code just collects some choices, which are 
+then executed in section_\ref{ss:ExOpt}. We use an ~\if...~ 
+without ~\newif~ since ~\if...true~ and ~\if...false~ 
+would occur at most two times and only within the present 
+package. (~\AtEndOfClass{\RequirePackage{edtable}}~ 
+could be used instead, I just overlooked this. Now I don't 
+change it because it allows to change the version requirement 
+at one place only.)
+\begin{code}\begin{verbatim}
+\let\if@LN@edtable\iffalse 
+ 
+\DeclareOption{edtable}{\let\if@LN@edtable\iftrue}
+ 
+\DeclareOption{longtable}{\let\if@LN@edtable\iftrue 
+  \PassOptionsToPackage{longtable}{edtable}}
+ 
+\DeclareOption{nolongtablepatch}{% 
+  \PassOptionsToPackage{nolongtablepatch}{edtable}}
+\end{verbatim}
+\end{code}
+(/New v4.1) 
+
+\subsection{% 
+Switch among settings 
+\unskip}\label{ss:v3opts}
+
+There is a bunch of package options that execute                     %% v4.2 
+user commands only. 
+
+Options ~left~ (~right~) put the line numbers on the left
+(right) margin.  This works in all modes.  ~left~ is the
+default.
+\begin{code}\begin{verbatim}
+\DeclareOption{left}{\leftlinenumbers*}
+ 
+\DeclareOption{right}{\rightlinenumbers*}
+\end{verbatim}
+\end{code}
+Option ~switch~ (~switch*~) puts the line numbers on the
+outer (inner) margin of the text.   This requires running
+the pagewise mode,  but we turn off the page offset
+subtraction, getting sort of running numbers again.  The
+~pagewise~ option may restore true pagewise mode later.
+\begin{code}\begin{verbatim}
+\DeclareOption{switch}{\setpagewiselinenumbers
+                       \switchlinenumbers
+                       \runningpagewiselinenumbers}
+ 
+\DeclareOption{switch*}{\setpagewiselinenumbers
+                        \switchlinenumbers*%
+                        \runningpagewiselinenumbers}
+\end{verbatim}
+\end{code}
+In twocolumn mode, we can switch the line numbers to 
+the outer margin, and/or start with number 1 in each
+column.  Margin switching is covered by the ~switch~ 
+options.
+\begin{code}\begin{verbatim}
+\DeclareOption{columnwise}{\setpagewiselinenumbers
+                           \columnwiselinenumberstrue
+                           \realpagewiselinenumbers}
+\end{verbatim}
+\end{code}
+The options ~pagewise~ and ~running~ select the major
+linenumber mechanism.  ~running~ line numbers refer to a real
+counter value, which can be reset for any paragraph,
+even getting  multiple paragraphs on one page starting
+with line number one.  ~pagewise~ line numbers get a
+unique hidden number within the document,  but with the
+opportunity to establish the page on which they finally
+come to rest.  This allows the subtraction of the page
+offset, getting the numbers starting with 1 on top of each
+page, and margin switching in twoside formats becomes
+possible.  The default mode is ~running~.  
+
+The order of declaration of the options is important here
+~pagewise~ must come after ~switch~, to overide running
+pagewise mode. ~running~ comes last, to reset the running
+line number mode, e.g, after selecting margin switch mode
+for ~pagewise~ running.  Once more, if you specify all
+three of the options ~[switch,pagewise,running]~, the
+result is almost nothing, but if you later say
+~\pagewiselinenumbers~,  you get margin switching, with
+real pagewise line numbers.
+
+\begin{code}\begin{verbatim}
+\DeclareOption{pagewise}{\setpagewiselinenumbers
+                         \realpagewiselinenumbers}
+ 
+\DeclareOption{running}{\setrunninglinenumbers}
+\end{verbatim}
+\end{code}
+The option ~modulo~ causes only those linenumbers to be
+printed which are multiples of five. 
+\begin{code}\begin{verbatim}
+\DeclareOption{modulo}{\modulolinenumbers\relax}
+\end{verbatim}
+\end{code}
+Option ~modulo*~ modifies ~modulo~ in working like 
+~\modulolinenumbers*~---see section_\ref{s:UserCmds}. 
+\begin{code}\begin{verbatim}
+\DeclareOption{modulo*}{\modulolinenumbers*\relax}
+\end{verbatim}
+\end{code}
+The package option ~mathlines~ switches the behavior of
+the ~{linenomath}~ environment with its star-form.
+Without this option, the ~{linenomath}~ environment does
+not number the lines of the display, while the star-form
+does.  With this option, its just the opposite.
+
+\begin{code}\begin{verbatim}
+\DeclareOption{mathlines}{\linenumberdisplaymath}
+\end{verbatim}
+\end{code}
+~displaymath~ now calls for wrappers of the standard 
+\LaTeX\ display math environment.  This was previously 
+done by ~mlineno.sty~.
+
+(New v4.3) Option `displaymath' becomes default according 
+to Erik \mbox{Luijten}'s suggestion. I was finally convinced 
+of this as soon as I discovered how to avoid a spurious line 
+number above ~\begin{linenomath}~ (subsection_\ref{ss:DM}). 
+~\endlinenomath~ provides ~\ignorespaces~, so what could go 
+wrong now? 
+\begin{code}\begin{verbatim}
+\DeclareOption{displaymath}{\PackageWarningNoLine{lineno}{%
+                Option [displaymath] is obsolete -- default now!}} 
+\end{verbatim}
+\end{code}
+(/New v4.3) 
+
+\subsection{%
+Compatibility with \texttt{hyperref}      %% own subsec. v4.3. 
+\unskip}
+The ~hyperref~ package, via ~nameref~, requires three more 
+groups in the second argment of a ~\newlabel~.  Well, why 
+shouldn't it get them?  (New v3.07) The presence of the
+~nameref~ package is now detected automatically
+~\AtBeginDocument~. (/New v3.07) (Fixed in v3.09)  We try
+to be smart, and test ~\AtBeginDocument~ if the ~nameref~
+package is loaded, but ~hyperref~ postpones the loading of
+~nameref~ too, so this is all in vain.
+
+(New v4.3)  But we can also test at the first ~\linelabel~. 
+Regarding the error-message for misplaced ~\linelabel~ from v4.11: 
+previously, ~\linenumbers~ rendered ~\linelabel~ the genuine 
+version of ~\linelabel~ from the start on. This doesn't work 
+now, since ~\@LN@linelabel~ may change its meaning after the 
+first ~\linenumbers~ and before a next one (if there is some). 
+(/New v4.3) 
+\begin{code}\begin{verbatim}
+\DeclareOption{hyperref}{\PackageWarningNoLine{lineno}{%
+                Option [hyperref] is obsolete. 
+  \MessageBreak The hyperref package is detected automatically.}}
+ 
+\AtBeginDocument{% 
+  \@ifpackageloaded{nameref}{%
+\end{verbatim}
+\end{code}
+(New v4.3)  ``Global'' is merely ``symbolic'' ~\AtBeginDoc...~. 
+If ~nameref~ is not detected here, the next ~\@LN@linelabel~ 
+will do almost the same, then globally indeed. 
+\begin{code}\begin{verbatim}
+    \gdef\@LN@ExtraLabelItems{{}{}{}}% 
+  }{%
+    \global\let\@LN@@linelabel\@LN@linelabel 
+    \gdef\@LN@linelabel{% 
+\end{verbatim}
+\end{code}
+~\@ifpackageloaded~ is ``preamble only'', its---very 
+internal---preamble definition is replicated here: 
+\begin{code}\begin{verbatim}
+     \expandafter 
+      \ifx\csname ver@nameref.sty\endcsname\relax \else 
+        \gdef\@LN@ExtraLabelItems{{}{}{}}% 
+      \fi 
+\end{verbatim}
+\end{code}
+Now aim at the ``usual'' behaviour: 
+\begin{code}\begin{verbatim}
+      \global\let\@LN@linelabel\@LN@@linelabel 
+      \global\let\@LN@@linelabel\relax 
+      \@LN@linelabel
+    }% 
+  }%
+} 
+\end{verbatim}
+\end{code}
+(/New v4.3) 
+
+(New v4.1) 
+\subsection{% 
+A note on calling so many options 
+\unskip} 
+
+The number of package options may stimulate worrying about how to 
+\emph{enter} all the options that one would like to use---they may 
+not fit into one line. Fortunately, you can safely break code lines 
+after the commas separating the option names in the ~\usepackage~
+command (no comment marks needed). 
+
+\subsection{% 
+Execute options
+\unskip}\label{ss:ExOpt}
+
+We stop declaring options and execute the ones that are 
+called by the user.       (/New v4.1)
+\begin{code}\begin{verbatim}
+\ProcessOptions
+\end{verbatim}
+\end{code}
+(New v4.1)        Now we know whether ~edtable.sty~ is wanted 
+and (if it is) with which options it is to be called. 
+\begin{code}\begin{verbatim}
+\if@LN@edtable \RequirePackage{edtable}[2005/03/07] \fi 
+\end{verbatim}
+\end{code}
+(/New v4.1) 
+
+\section{%
+Former package extensions 
+\label{s:Xt}\unskip}
+
+The extensions in this section were previously supplied 
+in separate ~.sty~ files. 
+
+\subsection{%
+$display math$
+\unskip}\label{ss:display}
+(New v4.3)    From now on, you no longer need to type 
+the ~{linenomath}~ environment with the ~\[~, ~{equation}~, 
+and ~{eqnarray}~ environments---and you no longer need to 
+use the former package option ~displaymath~ for this feature. 
+(/New v4.3) 
+
+The standard \LaTeX\ display math environments are
+wrapped in a ~{linenomath}~ environment.
+
+(New 3.05)  The ~[fleqn]~ option of the standard
+\LaTeX\ classes defines the display math
+environments such that line numbers appear just
+fine.  Thus, we need not do any tricks when
+~[fleqn]~ is loaded, as indicated by presents of
+the ~\mathindent~ register.           (/New 3.05)
+
+(New 3.05a)  for ~{eqnarray}~s we rather keep the
+old trick.                            (/New 3.05a)
+
+(New 3.08) Wrap ~\[~ and ~\]~ into ~{linenomath}~, 
+instead of ~{displaymath}~.  Also save the definition
+of ~\equation~, instead of replicating the current 
+\LaTeX\ definition.                    (/New 3.08)
+\begin{code}\begin{verbatim}
+ \@ifundefined{mathindent}{
+ 
+  \let\LN@displaymath\[%
+  \let\LN@enddisplaymath\]%
+  \renewcommand\[{\begin{linenomath}\LN@displaymath}%
+  \renewcommand\]{\LN@enddisplaymath\end{linenomath}}%
+\end{verbatim}
+\end{code}
+
+\begin{code}\begin{verbatim}
+  \let\LN@equation\equation
+  \let\LN@endequation\endequation
+  \renewenvironment{equation}%
+     {\linenomath\LN@equation}%
+     {\LN@endequation\endlinenomath}%
+ 
+ }{}% \@ifundefined{mathindent} -- 3rd arg v4.2, was \par! 
+ 
+  \let\LN@eqnarray\eqnarray
+  \let\LN@endeqnarray\endeqnarray
+  \renewenvironment{eqnarray}%
+     {\linenomath\LN@eqnarray}%
+     {\LN@endeqnarray\endlinenomath}%
+\end{verbatim}
+\end{code}
+(UL)        Indeed. The \LaTeX\ macros are saved for 
+unnumbered mode, which is detected by ~\linenomath~. 
+(/UL) 
+
+\subsection{%
+Line numbers in internal vertical mode
+\unskip}\label{ss:ILN}
+
+The command ~\internallinenumbers~ adds line numbers in 
+internal vertical mode, but with limitations: we assume
+fixed baseline skip.
+
+(v4.22)       v3.10 provided a global (~\global\advance~) 
+as well as a local version (star-form, using 
+~\c@internallinenumber~). ~\resetlinenumbers~ acted 
+locally and was here used with the global version---save 
+stack danger, \TeX book p._301---in v4.00 I 
+disabled the global version therefore. Now I find that 
+it is better to keep a global version, and the now global 
+~\resetlinenumbers~ is perfect for this. The global version 
+allows continuing the ``internal'' numbers in the ensuing 
+``external'' text, and---unless reset by brackets 
+argument---continuing the above series of line numbers. 
+As with v3.10, the local version always starts with 
+line number one. A new ~\@LN@iglobal~ steps ~\global~ly 
+in the global version, otherwise it is ~\relax~. 
+(I also remove all my stupid discussions as of v4.00. 
+And I use ~\newcommand~.)     (v4.22)
+\begin{code}\begin{verbatim}
+\let\@LN@iglobal\global                           % v4.22 
+ 
+\newcommand\internallinenumbers{\setrunninglinenumbers 
+     \let\@@par\internallinenumberpar
+     \ifx\@par\@@@par\let\@par\internallinenumberpar\fi
+     \ifx\par\@@@par\let\par\internallinenumberpar\fi
+     \ifx\@par\linenumberpar\let\@par\internallinenumberpar\fi
+     \ifx\par\linenumberpar\let\par\internallinenumberpar\fi
+     \@ifnextchar[{\resetlinenumber}%]
+                 {\@ifstar{\let\c@linenumber\c@internallinenumber
+                           \let\@LN@iglobal\relax % v4.22
+                           \c@linenumber\@ne}{}}%
+     }
+ 
+\let\endinternallinenumbers\endlinenumbers
+\@namedef{internallinenumbers*}{\internallinenumbers*}
+\expandafter\let\csname endinternallinenumbers*\endcsname\endlinenumbers
+ 
+\newcount\c@internallinenumber
+\newcount\c@internallinenumbers
+ 
+\newcommand\internallinenumberpar{% 
+     \ifvmode\@@@par\else\ifinner\@@@par\else\@@@par
+     \begingroup
+        \c@internallinenumbers\prevgraf
+        \setbox\@tempboxa\hbox{\vbox{\makeinternalLinenumbers}}%
+        \dp\@tempboxa\prevdepth
+        \ht\@tempboxa\z@
+        \nobreak\vskip-\prevdepth
+        \nointerlineskip\box\@tempboxa
+     \endgroup 
+     \fi\fi
+     }
+ 
+\newcommand\makeinternalLinenumbers{% 
+   \ifnum\c@internallinenumbers>\z@               % v4.2
+   \hb@xt@\z@{\makeLineNumber}% 
+   \@LN@iglobal                                   % v4.22 
+     \advance\c@linenumber\@ne
+   \advance\c@internallinenumbers\m@ne
+   \expandafter\makeinternalLinenumbers\fi
+   }
+ % TODO v4.4+: star: line numbers right!? cf. lnocapt.sty
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Line number references with offset
+\unskip}
+
+This extension defines macros to refer to line
+numbers with an offset, e.g., to refer to a line
+which cannot be labeled directly (display math).
+This was formerly knows as ~rlineno.sty~.
+
+To refer to a pagewise line number with offset:
+\begin{quote}
+~\linerefp[~<OFFSET>~]{~<LABEL>~}~
+\end{quote}
+To refer to a running line number with offset:
+\begin{quote}
+~\linerefr[~<OFFSET>~]{~<LABEL>~}~
+\end{quote}
+To refer to a line number labeled in the same mode as currently
+selected:
+\begin{quote}
+~\lineref[~<OFFSET>~]{~<LABEL>~}~
+\end{quote}
+\begin{code}\begin{verbatim}
+\newcommand\lineref{%
+  \ifx\c@linenumber\c@runninglinenumber
+     \expandafter\linerefr
+  \else
+     \expandafter\linerefp
+  \fi
+}
+ 
+\newcommand*\linerefp[2][\z@]{{%
+   \let\@thelinenumber\thelinenumber
+   \edef\thelinenumber{\advance\c@linenumber#1\relax
+                       \noexpand\@thelinenumber}%
+   \ref{#2}%
+}}
+\end{verbatim}
+\end{code}
+This goes deep into \LaTeX's internals.
+\begin{code}\begin{verbatim}
+\newcommand*\linerefr[2][\z@]{{%
+   \def\@@linerefadd{\advance\c@linenumber#1}%
+   \expandafter\@setref\csname r@#2\endcsname
+   \@linerefadd{#2}%
+}}
+ 
+\newcommand*\@linerefadd[2]{\c@linenumber=#1\@@linerefadd\relax
+                            \thelinenumber}
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Numbered quotation environments
+\unskip}
+
+The ~{numquote}~ and ~{numquotation}~
+environments are like ~{quote}~ and
+~{quotation}~, except there will be line
+numbers.  
+
+An optional argument gives the number to count
+from.  A star ~*~ (inside or outside the closing
+~}~) prevent the reset of the line numbers.
+Default is to count from one.
+
+(v4.22: A local version using ~\c@internallinenumber~ 
+might be useful, see subsection_\ref{ss:ILN}.)                 %% TODO v4.4+
+\begin{code}\begin{verbatim}
+\newcommand\quotelinenumbers
+   {\@ifstar\linenumbers{\@ifnextchar[\linenumbers{\linenumbers*}}}
+ 
+\newdimen\quotelinenumbersep
+\quotelinenumbersep=\linenumbersep
+\let\quotelinenumberfont\linenumberfont
+ 
+\newcommand\numquotelist
+   {\leftlinenumbers
+    \linenumbersep\quotelinenumbersep
+    \let\linenumberfont\quotelinenumberfont
+    \addtolength{\linenumbersep}{-\@totalleftmargin}%
+    \quotelinenumbers
+   }
+ 
+\newenvironment{numquote}     {\quote\numquotelist}{\endquote}
+\newenvironment{numquotation} {\quotation\numquotelist}{\endquotation}
+\newenvironment{numquote*}    {\quote\numquotelist*}{\endquote}
+\newenvironment{numquotation*}{\quotation\numquotelist*}{\endquotation}
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Frame around a paragraph
+\unskip}
+
+The ~{bframe}~ environment draws a frame around
+some text, across page breaks, if necessary.
+
+This works only for plain text paragraphs,
+without special height lines. All lines must be
+~\baselineskip~ apart, no display math.
+\begin{code}\begin{verbatim}
+\newenvironment{bframe}
+  {\par
+   \@tempdima\textwidth
+   \advance\@tempdima 2\bframesep
+   \setbox\bframebox\hb@xt@\textwidth{%
+      \hskip-\bframesep
+      \vrule\@width\bframerule\@height\baselineskip\@depth\bframesep
+      \advance\@tempdima-2\bframerule
+      \hskip\@tempdima
+      \vrule\@width\bframerule\@height\baselineskip\@depth\bframesep
+      \hskip-\bframesep
+   }%
+   \hbox{\hskip-\bframesep
+         \vrule\@width\@tempdima\@height\bframerule\@depth\z@}%
+   \nointerlineskip
+   \copy\bframebox
+   \nobreak
+   \kern-\baselineskip
+   \runninglinenumbers
+   \def\makeLineNumber{\copy\bframebox\hss}%
+  }
+  {\par
+   \kern-\prevdepth
+   \kern\bframesep
+   \nointerlineskip
+   \@tempdima\textwidth
+   \advance\@tempdima 2\bframesep
+   \hbox{\hskip-\bframesep
+         \vrule\@width\@tempdima\@height\bframerule\@depth\z@}%
+  }
+ 
+\newdimen\bframerule
+\bframerule=\fboxrule
+ 
+\newdimen\bframesep
+\bframesep=\fboxsep
+ 
+\newbox\bframebox
+\end{verbatim}
+\end{code}
+
+
+\section{%
+Move \scs{vadjust} items (New v4.00)
+\unskip}\label{s:MVadj} 
+
+This section completes reviving ~\pagebreak~, ~\nopagebreak~, 
+~\vspace~, and the star and optional form of ~\\~. This was 
+started in section_\ref{ss:output} and resumed in 
+section_\ref{ss:MLN} and subsection_\ref{ss:calls}.
+The problem was explained in section_\ref{ss:output}: 
+~\vadjust~ items come out at a bad position, and the 
+\LaTeX\ commands named before work with ~\vadjust~ indeed. 
+Our solution was sketched there as well. 
+
+According to the caveat in subsection_\ref{ss:OnOff} concerning
+~\ifLineNumbers~, the \LaTeX\ commands enumerated may go 
+wrong if you switch line numbering inside or at the end of 
+a paragraph. 
+
+\subsection{%
+Redefining \scs{vadjust}
+\unskip}\label{ss:PVadj}
+
+~\vadjust~ will temporarily be changed into the following 
+command. 
+\begin{code}\begin{verbatim}
+\def\PostponeVadjust#1{% 
+  \global\let\vadjust\@LN@@vadjust 
+\end{verbatim}
+\end{code}
+This undoes a ~\global\let\vadjust\PostponeVadjust~ which will 
+start each of the refined \LaTeX\ commands. The ~\global~s 
+are most probably superfluous. They might be useful should one 
+~\vadjust~ appear in a group starting after the change of 
+~\vadjust~ into ~\PostponeVadjust~. 
+(UL) Even the undoing may be superfluous, cf._discussion 
+in section_\ref{ss:ReDef} below.  (UL) 
+\begin{code}\begin{verbatim}
+  \vadjust{\penalty-\@Mppvacodepen}% 
+  \g@addto@macro\@LN@vadjustlist{#1\@lt}% 
+}
+\let\@LN@@vadjust\vadjust 
+\global\let\@LN@vadjustlist\@empty 
+\global\let\@LN@do@vadjusts\relax 
+\end{verbatim}
+\end{code}
+These ~\global~s are just to remind that 
+all the changes of the strings after ~\let~ should be 
+~\global~ (\TeX book p._301). ~\@LN@vadjustlist~ collects 
+the ~\vadjust~ items of a paragraph. ~\PassVadjustList~ 
+tears one ~\vadjust~ item for the current line out of 
+~\@LN@vadjustlist~ and puts it into ~\@LN@do@vadjusts~. 
+The latter is encountered each line in ~\MakeLineNo~ 
+(section_\ref{ss:MLN}), while those \LaTeX\ ~\vadjust~ 
+commands will come rather rarely. So I decided that 
+~\@LN@do@vadjust~ is ~\relax~ until a ~\vadjust~ item 
+is waiting. In the latter case, ~\@LN@do@vadjusts~ 
+is turned into a list macro which resets itself to 
+~\relax~ when the other contents have been placed in 
+the vertical list.---~\PassVadjustList~ is invoked by 
+the output routine (section_\ref{ss:output}), so the 
+~\box255~ must be put back. 
+\begin{code}\begin{verbatim}
+\def\PassVadjustList{% 
+  \unvbox\@cclv 
+  \expandafter \@LN@xnext \@LN@vadjustlist \@@ 
+                          \@tempa \@LN@vadjustlist 
+  \ifx\@LN@do@vadjusts\relax 
+    \gdef\@LN@do@vadjusts{\global\let\@LN@do@vadjusts\relax}% 
+  \fi 
+  \expandafter \g@addto@macro \expandafter \@LN@do@vadjusts 
+    \expandafter {\@tempa}% 
+} 
+\end{verbatim}
+\end{code}
+
+\subsection{%
+Redefining the \LaTeX\ commands 
+\unskip}\label{ss:ReDef}
+
+Now we change ~\pagebreak~ etc.\ 
+so that they use ~\PostponeVadjust~ in place of ~\vadjust~. 
+We try to do this as independently as possible of the 
+implementation of the \LaTeX\ commands to be redefined. 
+Therefore, we don't just copy macro definition code from any 
+single implementation (say, latest \LaTeX) and insert our 
+changes, but attach a conditional 
+~\global\let\vadjust\PostponeVadjust~ 
+to their left ends in a way which should work rather 
+independantly of their actual code. 
+However, ~\vadjust~ should be the primitive again after 
+execution of the command. So the ~\global\let...~ may be used 
+only if it's guaranteed that a ~\vadjust~ is near.---(UL) 
+Sure? In line numbering mode, probably each ~\vadjust~ 
+coming from a \LaTeX\ command should be ~\PostponeVadjust~. 
+~\marginpar~s and floats seem to be the only cases which 
+are not explicitly dealt with in the present section. 
+This would be a way to avoid ~\@LN@nobreaktrue~! 
+Of course, the ~\vadjust~s that the present package uses 
+then must be replaced by ~\@LN@@vadjust~.---Maybe 
+next time.      (/UL) 
+
+The next command and something else will be added to the 
+\LaTeX\ commands we are concerned with here. 
+\begin{code}\begin{verbatim}
+\DeclareRobustCommand\@LN@changevadjust{% 
+  \ifvmode\else\ifinner\else 
+    \global\let\vadjust\PostponeVadjust 
+  \fi\fi 
+} 
+\end{verbatim}
+\end{code}
+(UL) What about math mode? Math display? Warn? (/UL) 
+
+~\@tempa~ will now become a two place macro which adds first 
+argument (single token), enclosed by ~\ifLineNumbers~\,\dots
+~\fi~ to the left of second argument. As long as we need it, 
+we can't use the star form of ~\DeclareRobustCommand~ or 
+the like, because AMS-\LaTeX\ uses ~\@tempa~ for ~\@ifstar~. 
+\begin{code}\begin{verbatim}
+\def\@tempa#1#2{% 
+  \expandafter \def \expandafter#2\expandafter{\expandafter
+    \ifLineNumbers\expandafter#1\expandafter\fi#2}% 
+} 
+\end{verbatim}
+\end{code}
+(UL)              This ~\ifLineNumber~ can be fooled by 
+~\linenumbers~ ahead etc. It might be better to place 
+a signal penalty in any case and let the output routine 
+decide what to do. 
+(/UL) 
+
+We use the occasion to switch off linenumbers where they 
+don't work anyway and where we don't want them, 
+especially in footnotes: 
+\begin{code}\begin{verbatim}
+\@tempa\nolinenumbers\@arrayparboxrestore 
+\end{verbatim}
+\end{code}
+We hope this suffices $\dots$ let's check one thing 
+at least: 
+\begin{code}\begin{verbatim}
+\CheckCommand*\@parboxrestore{\@arrayparboxrestore\let\\\@normalcr}
+\end{verbatim}
+\end{code}
+Now for the main theme of the section. 
+The next lines assume that ~\vspace~, ~\pagebreak~, and 
+~\nopagebreak~ use ~\vadjust~ whenever they occur outside 
+vertical mode; moreover, that they don't directly read 
+an argument. Indeed ~\pagebreak~ and ~\nopagebreak~ first 
+call something which tests for a left bracket ahead, 
+while ~\vspace~ first tests for a star. 
+\begin{code}\begin{verbatim}
+\@tempa\@LN@changevadjust\vspace 
+\@tempa\@LN@changevadjust\pagebreak 
+\@tempa\@LN@changevadjust\nopagebreak 
+\end{verbatim}
+\end{code}
+~\\~, however, uses ~\vadjust~ only in star or optional form. 
+We relax independency of implementation in assuming 
+that ~\@normalcr~ is the fragile version of ~\\~ 
+(and we use ~\@ifstar~!). 
+(Using a copy of ~\\~ would be safer, but an ugly repetition 
+of ~\protect~.) 
+\begin{code}\begin{verbatim}
+\DeclareRobustCommand\\{% 
+  \ifLineNumbers 
+    \expandafter \@LN@cr 
+  \else 
+    \expandafter \@normalcr 
+  \fi 
+} 
+\def\@LN@cr{% 
+  \@ifstar{\@LN@changevadjust\@normalcr*}% 
+          {\@ifnextchar[{\@LN@changevadjust\@normalcr}\@normalcr}% 
+} 
+\end{verbatim}
+\end{code}
+Moreover we hope that ~\newline~ never leads to a ~\vadjust~, 
+although names of some commands invoked by ~\\~ contain 
+~newline~. At last, this seems to have been OK since 1989 or 
+even earlier. 
+
+\modulolinenumbers[1]
+\firstlinenumber{0} 
+Let's have a few tests.\vspace*{.5\baselineskip} 
+Testing ~\pagebreak~ and ~\nopagebreak~ would be too expensive 
+here, but---oops!---we have just experienced a successful 
+~\vspace*{.5\baselineskip}~. A 
+~\\*[.5\baselineskip]~\\*[.5\baselineskip] may look even more 
+drastical, but this time we are happy about it. Note that the 
+line numbers have moved with the lines. Without our changes, 
+one line number\vadjust{\kern.5\baselineskip} would have 
+``anticipated'' the move of the next line, just as you can 
+observe it now. 
+(/New v4.00) 
+
+\switchlinenumbers 
+
+\subsection{% 
+Reminder on obsoleteness 
+\unskip} 
+
+(New v4.1)    We have completed inclusion of the earlier 
+extension packages ~linenox0.sty~, ~linenox1.sty~, and 
+~lnopatch.sty~. If one of them is loaded, though, 
+we produce an error message before something weird happens. 
+We avoid ~\newif~ because the switchings occur so rarely. 
+\begin{code}\begin{verbatim}
+\AtBeginDocument{% 
+  \let\if@LN@obsolete\iffalse 
+  \@ifpackageloaded{linenox0}{\let\if@LN@obsolete\iftrue}\relax 
+  \@ifpackageloaded{linenox1}{\let\if@LN@obsolete\iftrue}\relax 
+  \@ifpackageloaded{lnopatch}{\let\if@LN@obsolete\iftrue}\relax
+  \if@LN@obsolete 
+    \PackageError{lineno}{Obsolete extension package(s)}{% 
+    With lineno.sty version 4.00 or later,\MessageBreak 
+    linenox0/linenox1/lnopatch.sty must no longer be loaded.}% 
+  \fi 
+} 
+\end{verbatim}
+\end{code}
+
+\modulolinenumbers[1]
+\section{%
+The final touch
+\unskip}
+
+There is one deadcycle for each line number.
+\begin{code}\begin{verbatim}
+\advance\maxdeadcycles 100
+ 
+\endinput
+\end{verbatim}
+\end{code}
+
+\section{%
+The user commands
+\unskip}\label{s:UserCmds} 
+
+The user commands to turn on and off line numbering 
+are 
+\begin{description}\item
+[|\linenumbers]                                                       \ \par
+Turn on line numbering in the current mode.
+
+\item 
+[|\linenumbers*]                                              \ \par$\qquad$
+and reset the line number to 1.
+\def\NL{<number>]}\item 
+[|\linenumbers[\NL]                                           \ \par$\qquad$
+and start with <number>.  
+\item
+[|\nolinenumbers]                                                     \ \par
+Turn off line numbering.
+\item
+[|\runninglinenumbers*[\NL]                                           \ \par
+Turn on ~running~ line numbers, with the same optional
+arguments as ~\linenumbers~.  The numbers are running
+through the text over pagebreaks.  When you turn
+numbering off and on again, the numbers will continue,
+except, of cause, if you ask to reset or preset the
+counter.
+\item
+[|\pagewiselinenumbers]                                               \ \par
+Turn on ~pagewise~ line numbers.  The lines on each
+page are numbered beginning with one at the first
+~pagewise~ numbered line.
+\item
+[|\resetlinenumber[\NL]                                               \ \par
+Reset ~[~Set~]~ the line number to 1
+~[~<number>~]~.
+\item
+[|\setrunninglinenumbers]                                             \ \par
+Switch to ~running~ line number mode. Do \emph{not}
+turn it on or off.
+\item
+[|\setpagewiselinenumbers]                                            \ \par
+Switch to ~pagewise~ line number mode. Do \emph{not}
+turn it on or off.
+\item
+[|\switchlinenumbers*]                                                \ \par
+Causes margin switching in pagewise modes. With the
+star,  put the line numbers on the inner margin.
+\item
+[|\leftlinenumbers*]                                                  \ \par
+\item
+[|\rightlinenumbers*]                                                 \ \par
+Set the line numbers in the left/right margin. With the
+star this works for both modes of operation, without
+the star only for the currently selected mode. 
+\item
+[|\runningpagewiselinenumbers]                                        \ \par
+When using the pagewise line number mode,  do not
+subtract the page offset.  This results in running
+line numbers again,  but with the possibility to switch
+margins.  Be careful when doing line number
+referencing,  this mode status must be the same while
+setting the paragraph and during references.
+\item
+[|\realpagewiselinenumbers]                                           \ \par
+Reverses the effect of ~\runningpagewiselinenumbers~.
+\item
+[|\modulolinenumbers[\NL]                                             \ \par
+Give a number only to lines which are multiples of
+~[~<number>~]~.  If <number> is not specified, the
+current value in the counter ~linenumbermodulo~ is
+retained.  <number>=1 turns this off without changing
+~linenumbermodulo~.  The counter is initialized to 5.
+\item
+[|\modulolinenumbers*[\NL]                                            \ \par 
+Like ~\modulolinenumbers~, the only difference being 
+that the first line number after a ~\linenumbers~ 
+(or ~\runninglinenumbers~, ~\pagewiselinenumbers~, 
+~\quotelinenumbers~) is printed regardless of the 
+modulo---yet `1' is printed only after (or \dots) 
+~\firstlinenumber{1}~. 
+This also applies to the first line of a 
+~{linenumbers}~ or respective environment. 
+See subsection_\ref{ss:Mod} for another explanation. 
+The behaviour may be unsatisfactory with pagewise 
+line-numbering. 
+\item
+[|\firstlinenumber]                                                   \ \par 
+~\firstlinenumber{~<filino>~}~ brings about that 
+(after it) line numbers less than <filino> do 
+\emph{not} appear in the margin. Moreover, with 
+~\modulolinenumbers[~<number>~]~, just the line 
+numbers which are <filino> plus a multiple of 
+<number> are printed.---If you had 
+~\firstlinenumber{~<pos>~}~ with some $\mbox{<pos>}>0$ 
+and want to switch to printing multiples of, e.g., 
+4, you best do ~\modulolinenumbers[4]~ and 
+~\firstlinenumber{0}~. (See subsection_\ref{ss:Mod} 
+for technical details.) 
+\item
+[|\linenumberdisplaymath]                                             \ \par
+Number the lines of a display math in a ~{linenomath}~
+environment, but do not in a ~{linenomath*}~
+environment.  This is used by the package option
+~[mathlines]~. 
+\item
+[|\nolinenumberdisplaymath]                                           \ \par
+Do not Number the lines of a display math in a
+~{linenomath}~ environment, but do in a
+~{linenomath*}~ environment.  This is the default.
+\item
+[|\linelabel]                                                         \ \par
+Set a ~\linelabel{~<foo>~}~ to the line number where
+this commands is in.  Refer to it with the \LaTeX\
+referencing commands ~\ref{~<foo>~}~ and
+~\pageref{~<foo>~}~.
+\end{description}
+The commands can be used globally, locally within groups
+or as environments.  It is important to know that they 
+take action only when the ~\par~ is executed.  The
+~\end{~<mode>~linenumbers}~ commands provide a ~\par~.
+Examples:
+\begin{verse}
+~{\linenumbers~  <text> ~\par}~                                         \\
+\ \\
+~\begin{linenumbers}~                                                   \\
+<text>                                                              \\
+~\end{linenumbers}~                                                     \\
+\ \\
+<paragraph> ~{\linenumbers\par}~                                        \\
+\ \\
+~\linenumbers~                                                          \\
+<text> ~\par~                                                         \\
+~\nolinenumbers~                                                        \\
+\ \\
+~\linenumbers~                                                          \\
+<paragraph> ~{\nolinenumbers\par}~                                      \\
+\end{verse}
+(New v4.00) 
+However, the examples containing <paragraph> show what you 
+should \emph{not} do, at least if you use ~\pagebreak~, 
+~\nopagebreak~, ~\vspace~, ~\\*~ or 
+~\\[~<space>~]~---cf._section_\ref{s:MVadj}. 
+
+The same care should be applied to the ``wizard'' devices 
+~\ifLineNumbers~ (subsection_\ref{ss:OnOff}) and
+~\PostponeVadjust~ (section_\ref{ss:PVadj}). 
+(/New v4.00) 
+
+(New v4.11) Oh, and the commands and environments of 
+section_{s:Xt} are missing. Sorry, I am in a hurry now. 
+May be next time.%                                             %% TODO v4.4+ 
+---And the  environments ~{linenomath}~ and ~{linenomath*}~should 
+get an own paragraph. In short, each math display, equation, 
+or ~{eqnarray}~ should be ``wrapped'' in one of ~{linenomath}~ 
+and ~{linenomath*}~. 
+
+\subsection{%
+Customization hooks
+\unskip} 
+
+There are several hooks to customize the appearance of the
+line numbers, and some low level hooks for special
+effects. 
+\begin{description}\item
+[|\thelinenumber]                                                     \ \par
+This macro should give the representation of the line
+number in the \LaTeX-counter ~linenumber~.  The
+default is provided by \LaTeX:                              \par$\qquad$
+~\arabic{linenumber}~
+\item
+[|\makeLineNumberLeft]                                                \ \par
+This macro is used to attach a line number to the left
+of the text page.  This macro should fill an ~\hbox to 0pt~ 
+which will be placed at the left margin of the
+page, with the reference point aligned to the line to
+which it should give a number.  Please use the macro
+~\LineNumber~ to refer to the line number. 
+
+The default definition is                                   \par$\qquad$
+~\hss\linenumberfont\LineNumber\hskip\linenumbersep~
+\item
+[|\makeLineNumberRight]                                               \ \par
+Like ~\makeLineNumberLeft~, but for line numbers on
+the right margin.
+
+The default definition is                                   \par$\qquad$
+~\linenumberfont\hskip\linenumbersep\hskip\textwidth~    \par$\qquad$
+~\hbox to\linenumberwidth{\hss\LineNumber}\hss~
+\item
+[|\linenumberfont]                                                    \ \par
+This macro is initialized to                                \par$\qquad$
+~\normalfont\tiny\sffamily~
+\item
+[|\linenumbersep]                                                     \ \par
+This dimension register sets the separation of the
+linenumber to the text. Default value is ~10pt~.
+\item
+[|\linenumberwidth]                                                   \ \par
+This dimension register sets the width of the line
+number box on the right margin.  The distance of the
+right edge of the text to the right edge of the line
+number is ~\linenumbersep~ + ~\linenumberwidth~. The
+default value is ~10pt~.  
+\item
+[|\theLineNumber] (for wizards)                                       \ \par
+This macro is called for printing a ~\newlabel~ entry
+to the aux-file.  Its definition depends on the mode.
+For running line numbers it's just ~\thelinenumber~,
+while in pagewise mode, the page offset subtraction
+is done in here.
+\item
+[|\makeLineNumber] (for wizards)                                      \ \par
+This macro produces the line numbers.  The definition
+depends on the mode.  In the running line numbers
+mode it just expands ~\makeLineNumberLeft~.
+\item
+[|\LineNumber] (for wizards)                                          \ \par
+This macro is called by ~\makeLineNumber~ to typeset
+the line number.  This hook is changed by the modulo
+mechanism 
+and by ~\firstlinenumber~. 
+\end{description}
+\end{document}%D
diff --git a/Master/texmf-dist/doc/latex/lineno/lnosuppl.pdf b/Master/texmf-dist/doc/latex/lineno/lnosuppl.pdf
new file mode 100644
index 00000000000..d41d5364e56
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/lnosuppl.pdf
diff --git a/Master/texmf-dist/doc/latex/lineno/lnosuppl.tex b/Master/texmf-dist/doc/latex/lineno/lnosuppl.tex
new file mode 100644
index 00000000000..eb3889fb7bb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/lnosuppl.tex
@@ -0,0 +1,92 @@
+%% LNoSuppl.tex -- U.L. 
+\title{\LARGE \bf Supplementary files belonging \\ 
+       to the \textit{lineno.sty} distribution \\[1ex]
+       \normalfont \Large
+       Lazy \texttt{ASCII}$\to$\texttt{PDF} listings}
+\author{Uwe L\"uck}
+\documentclass[10pt]{article}
+\usepackage{verbatim}
+\pagestyle{headings}
+\newcommand*{\cs}[1]{\texttt{\char"5C#1}}
+\newcommand*{\lcurl}[1]{\[\texttt{CTAN:/macros/latex/contrib/#1}\]}
+\makeatletter
+\newcommand*{\notinaux}[1]{% 
+  \ifx\protect\@typeset@protect #1% 
+  \else 
+    \ifdim\lastskip>\z@\ignorespaces\fi 
+  \fi}
+\makeatother 
+\begin{document}
+\maketitle
+\section*{Preface}
+
+\texttt{lineno.sty} is a macro package made by 
+Stephan~I.~B\"ottcher for attaching line numbers to 
+\LaTeX\ documents. Some people have used it for revising 
+submittings in collaboration with referees or co-authors. 
+Documentations are nowadays preferred to be in 
+Adobe's \texttt{PDF}---so \texttt{lineno.sty}'s 
+documentation is \lcurl{lineno/lineno.pdf\,.}
+
+\texttt{ednotes.sty} uses \texttt{lineno.sty} for critical 
+editions, combining it with Alexander~I.~Rozhenko's 
+\texttt{manyfoot.sty}---this was Christian Tapp's idea, 
+who then hired me for adding the \TeX nical details. 
+In doing this, I had to change some internals of 
+\texttt{lineno.sty}, so Stephan transferred maintenance 
+to me; then some of my macro files that I originally had 
+made for \texttt{ednotes.sty} wandered into the 
+\texttt{lineno} directory of CTAN---because they turned 
+out not to need \texttt{ednotes.sty}, 
+just to work as extensions of \texttt{lineno.sty}\,. 
+
+Now, I haven't had the time for making \texttt{.dtx} versions 
+of the \texttt{.sty} files for \texttt{ednotes}. 
+Therefore, ordinary \texttt{.pdf} documentation for 
+the remaining \texttt{.sty} files of \lcurl{lineno/}
+is missing. 
+What you see here is nothing but a somewhat structured listing 
+of the additional \texttt{.txt} and \texttt{.sty} files in 
+\texttt{PDF}, deriving from the \texttt{verbatim} package and 
+its \cs{verbatiminput} command. I hope the high quality 
+(scalable) output is worth it. 
+
+\leavevmode\hfill \textit{U.\,L.}
+
+\newpage 
+\tableofcontents
+ 
+\section{The \texttt{.txt} files}
+\subsection{\texttt{README.txt}}
+\verbatiminput{README.txt}
+\subsection{\texttt{COPYING.txt}}
+\verbatiminput{COPYING.txt}
+\subsection{\texttt{CHANGES.txt}}
+\verbatiminput{CHANGES.txt}
+
+\section{Tabular and array environments}
+\texttt{lineno.sty}'s package options \texttt{edtable}, 
+\texttt{longtable}, and \texttt{nolongtablepatch} 
+redefine \LaTeX\ tabular and array environments 
+such that \texttt{lineno} and \texttt{ednotes} commands 
+can be used inside. The code for these options resides 
+in separate files at present. We are listing them here. 
+\subsection{\texttt{edtable.sty}}
+\verbatiminput{edtable.sty}
+\subsection{\texttt{ltabptch.sty}}
+\verbatiminput{ltabptch.sty}
+
+\section{\cs{linelabel} and notes from \textit{math} mode: 
+         \notinaux{\\} \texttt{ednmath0.sty}}
+\verbatiminput{ednmath0.sty}
+
+\section{Extended line number references: \texttt{vplref.sty}} 
+\texttt{vplref.sty} is input through the \texttt{lineno} 
+package option \texttt{addpageno}. This adds page numbers 
+to line number references to distant sides---using the 
+\texttt{varioref} package from the \LaTeX\ distribution. 
+\verbatiminput{vplref.sty} 
+
+\end{document}
+
+end of LNoSuppl.tex 
diff --git a/Master/texmf-dist/doc/latex/lineno/ulineno.pdf b/Master/texmf-dist/doc/latex/lineno/ulineno.pdf
new file mode 100644
index 00000000000..2d2a407647d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/ulineno.pdf
diff --git a/Master/texmf-dist/doc/latex/lineno/ulineno.tex b/Master/texmf-dist/doc/latex/lineno/ulineno.tex
new file mode 100644
index 00000000000..458a3366f2c
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/lineno/ulineno.tex
@@ -0,0 +1,984 @@
+% Copyright 1995--1999 Stephan I. B"ottcher <stephan@nevis1.columbia.edu>
+%
+% This program can be redistributed and/or modified under the terms
+% of the LaTeX Project Public License Distributed from CTAN
+% archives in directory macros/latex/base/lppl.txt; either
+% version 1 of the License, or any later version.
+%
+% $Id: ulineno.tex,v 3.1 2001/08/03 03:29:19 stephan Exp $
+%
+% 1999-06-11 SiB: updated for lineno.sty v3.00
+
+\documentclass[12pt,a4paper,titlepage]{article}
+
+                                              \date{\def\$##1: ##2 ##3${##2}%$
+                                                                      Version 
+   \$Revision: 3.1 $, 
+   \$Date: 2001/08/03 03:29:19 $
+                                                                             }
+                                 \def\lineno.sty{\texttt{\itshape lineno.sty}}
+
+
+\title{           \lineno.sty
+\\                Users Manual
+}
+\author{      Stephan I. B\"ottcher
+}
+
+\usepackage{lineno}
+\usepackage{url}
+
+\def~{\verb~}
+\catcode`\<\catcode`\~
+\def<#1>{$\langle${\itshape#1}\/$\rangle$}
+\catcode`\|\catcode`\~
+\def|#1{{\ttfamily\string#1}}
+\def\NL{<number>]}
+
+\begin{document}
+\begin{runninglinenumbers}
+\renewcommand\linenumberfont{\normalfont\small\bfseries}
+\setlength\linenumbersep{1cm}
+\maketitle
+\thispagestyle{empty}
+\resetlinenumber
+\tableofcontents
+\clearpage
+\setcounter{page}{1}
+\pagewiselinenumbers
+
+\section{When to use \lineno.sty}
+
+The primary use of \lineno.sty is to get line numbers in your LaTeX
+document.  \lineno.sty directly supports line numbers in various
+modes, and if you have any wishes that are not directly supported,
+chances are good that \lineno.sty can be adapted to do it.  And if it
+turns out to be difficult with \lineno.sty, then it will be even more
+difficult without.
+
+There is one class of cases however, where \lineno.sty is not the most
+appropriate tool.  When your text already comes in lines, like source
+listings, tables, poetry,  then \lineno.sty will propably do the job,
+but other tools could do it much more efficiently.
+
+\lineno.sty can only number lines in the main text.  Lines in any kind
+of boxes cannot be numbered.  But see section \ref{sec:ilineno} below.
+
+\lineno.sty is especially useful when the text is broken into lines by
+\TeX\ itself.  In this case, the task to attach line numbers is not
+easy, and a tool like \lineno.sty has good chances to break when used
+together with other packages.
+
+On the other hand, \lineno.sty proved to be quite stable, and I did
+not get any reports of complete failure yet.
+
+With \lineno.sty, you can refer to the line numbers via \LaTeX s
+~\ref~ and ~\pageref~ macros.
+
+There are other applications, not directly related to line numbering.
+Whenever you want to attach something to your text, after a paragraph
+was broken into lines, across pagebreaks, lineno may do the job.
+
+\begin{bframe}
+  Say, you need a frame around some text, but the text should be able
+  to break across pages, \lineno.sty can be used to draw rules on both
+  margins, which can be completed at the top and bottom by some
+  special environment, see section\,\,\ref{sec:bframe}.
+\end{bframe}
+
+There may be cases, where other packages do a better job, e.g.,
+\url{CTAN:macros/latex/contrib/supported/numline}.
+
+
+\section{Where to get \lineno.sty}
+
+\lineno.sty is available on the \emph{Comprehensive TeX Archive
+  Network} (CTAN), e.g, \url{ftp:// ftp.tex.ac.uk/ tex-archive/
+  macros/ latex/ contrib/ supported/ lineno/ lineno.sty}.
+
+The home of \lineno.sty is \url{http:// www.nevis.columbia.edu/
+  ~stephan/ tex/ #lineno}.  Here you can get the latest version.
+
+\end{runninglinenumbers}
+
+\section{How to use \lineno.sty}
+
+As any other \LaTeXe\ package, you need to load it with
+\begin{quote}
+   ~\usepackage[~<options>~]{lineno}~
+\end{quote}
+
+\subsection{Package options}
+
+The available <options> are:
+\begin{description}
+
+\item[\texttt{[left]}:]  Put the line numbers into the left margin
+  (default). 
+
+\item[\texttt{[right]}:]  Put the line numbers into the right margin.
+
+\item[\texttt{[switch]}:]  Put the line numbers into the outer margin
+  (left on even numbered pager, right on odd numbered pages).
+
+\item[\texttt{[switch*]}:]  Put the line numbers into the inner
+  margin.
+  
+\item[\texttt{[pagewise]}:] Number the lines from 1 on each page.
+
+\item[\texttt{[running]}:]  Continuously number the lines (default).
+  
+\item[\texttt{[modulo]}:] Print line numbers only if they are
+  multiples of five.
+
+\item[\texttt{[mathlines]}:]  When using the ~{linenomath}~
+  environment for display math, put line numbers also on the lines of
+  the display.
+
+\item[\texttt{[displaymath]}:]  Automatically wrap the standard LaTeX
+  display math environments in ~{linenomath}~.
+
+  \begin{itshape}
+    Change from v2 to v3:  ~[mathlines]~ was called ~[displaymath]~
+    before, and ~[displaymath]~ was ~\usepacke{mlineno}~.
+  \end{itshape}
+  
+\end{description}
+All effects of these option can also be obtained by calling certain
+macros later in the document, except for ~[displaymath]~.
+
+\subsection{How to turn on line numbering}
+
+The line numbering is not activated by default.  If you want line
+numbers, you have to turn it on.  The simplest way is to say
+\begin{quote}
+    ~\linenumbers~
+\end{quote}
+This will turn on line numbers within the current group, according to
+the currently selected mode.  If you do it right at the beginning, the
+whole document will be numbered.
+
+~\linenumbers~ takes effect only when a paragraph is finished.  This
+is important if you use ~\linenumbers~ for a single paragraph only.
+This will \emph{not} work:
+\begin{quote}\obeylines
+   ~\begingroup~\\%
+   ~\linenumbers~
+     Text of your paragraph.
+   ~\endgroup~
+\end{quote}
+because the ~\endgroup~ terminates the effect of ~\linenumbers~ before
+the paragraph is finished.  The solution is to insert an empty line,
+or an explicit ~\par~ before the ~\endgroup~.
+
+The prefered solution is to use an enviroment:
+\begin{quote}\obeylines
+   ~\begin{linenumbers}~ 
+     Text of your paragraph. 
+   ~\end{linenumbers}~
+\end{quote}
+~\end{linenumbers}~ terminates the paragraph for you.  It will also
+make sure that the next paragraph is not indented, if there is no
+empty line in between.
+
+This form will not finish any preceeding paragraph.  If you do not
+leave an empty line before ~\begin{linenumbers}~, the previous
+  paragraph may also get line numbers (this is not true after a list
+  environment).
+
+A quite esoteric form to number a single paragraph is:
+\begin{quote}\obeylines
+     Text of your paragraph.
+     ~{\linenumbers\par}~
+\end{quote}
+Here, the ~\linenumbers~ is turned on in a group that just executes
+the ~\par~ to terminate the previous paragraph.  Only this paragraph
+will have line numbers. (~\par~ is exactly equivalent to an empty
+line).
+
+
+\subsection{How to turn off line numbering}
+
+You do not usualy turn of line numbering explicitly, but rather
+restrict line numbering to a group or an environment.  However, you
+can turn it off with the command
+\begin{quote}
+   ~\nolinenumbers~
+\end{quote}
+This macro can also be used as an environment.  The same restrictions
+apply as for ~\linenumbers~.
+
+
+\section{Numbering modes}
+
+Attaching line numbers after \TeX\ has broken the paragraph into lines
+is already quite a difficult job for \TeX.  Why?  Because \TeX\ does
+not normally give you any control after line breaking.  \lineno.sty
+does it by pretending that the current page ends after each and every
+line.  This keeps \TeX\ quite busy, but works.
+
+Often, you want the line numbers to depend on the page they finally end
+up.  E.g., you want the numbers to start with~ ~1 one each new page,
+or you want them to appear on the outer margins in twoside mode.  This
+is an almost impossible demand, but \lineno.sty can do it, at some
+cost, in terms of computing time, memory, and disk space.  \lineno.sty
+needs to write a note into the auxiliary file for each line in the
+numbered part of the text, and \TeX\ keeps some memory for each page,
+and all that takes some computation time to figure out on which page
+the line was in the last \LaTeX\ run.
+
+Thus, there are two basic numbering modes
+\begin{enumerate}
+  
+\item \emph{Running} line numbers.  The numbers run continuously along
+  the document, without considering page breaks.  
+  
+  The line numbers can be reset, or preset at any point in the
+  document (except within a paragraph).  Margin switching (or any
+  other dependence on the page breaks) is not possible.
+  
+\item \emph{Pagewise} line numbers.  The lines on each page are
+  numbered from one.  Automatic margin switching is possible.
+
+  \emph{Running} mode can be simulated in pagewise mode, to get
+  automatic margin switching with continuous line numbers, but without
+  the ability to reset/preset the line numbers anywhere in the
+  document.  
+  
+  Any feature that depends on the page breaks must use this mode.
+
+\end{enumerate}
+
+\begin{runninglinenumbers*}
+
+\subsection{\emph{Running} line numbers}
+
+This is the default mode of operation.  The lines of your text are
+numbered continuously across page breaks.  
+
+You cannot get automatic margin switching in this mode, because at the
+time when the line numbers are attached, it is not yet decided on
+which page the line will end up.  However, you can simulate continuous
+line numbers in \emph{pagewise} mode (see below), where margin
+switching becomes possible.
+
+You get this mode by
+\begin{itemize}\raggedright
+\item \emph{not} specifying any of the package options
+  ~[switch,pagewise]~,
+\item specifying the package option ~[running]~,
+\item give the command ~\setrunninglinenumbers~ in the document, or
+\item turn on line numbering with ~\runninglinenumbers~ or
+  ~\begin{runninglinenumbers}~. 
+\end{itemize}
+
+\subsubsection{Reseting or setting the line number}
+
+You can reset the line number with
+\begin{quote}
+  ~\resetlinenumber[~<number>~]~
+\end{quote}
+where the default is to reset the line number to one.
+
+Alternatively, you can give the line number in an optional argument to
+any command that turns on the line numbering in this mode:
+\begin{quote}\obeylines
+  ~\linenumbers[~<number>~]~ 
+  ~\runninglinenumbers[~<number>~]~ 
+  ~\begin{linenumbers}[~<number>~]~
+  ~\begin{runninglinenumbers}[~<number>~]~
+\end{quote}
+or reset the line number to 1 with any of the following:
+\begin{quote}\obeylines
+  ~\linenumbers*~ 
+  ~\runninglinenumbers*~ 
+  ~\begin{linenumbers*}~
+  ~\begin{linenumbers}*~
+  ~\begin{runninglinenumbers*}~
+  ~\begin{runninglinenumbers}*~
+\end{quote}
+This section of the manual is enclosed in
+\begin{quote}\obeylines
+  ~\begin{runninglinenumbers*}~
+  ~\end{runninglinenumbers*}~
+\end{quote}
+\end{runninglinenumbers*}
+
+
+\begin{pagewiselinenumbers}
+
+\subsection{\emph{Pagewise} line numbers}
+
+Basically, this mode prints line numbers starting with 1 on top of
+each page, counting only lines where this mode is active.  If you
+turn on this mode in the middle of a page, the numbers start with 1
+at that point.
+
+The \emph{pagewise} mode of operation is quite a bit more work for
+\TeX.  When the line numbers are printed, \TeX\ does not know on which
+page the current line will go.  To get \emph{pagewise} mode working,
+\LaTeX\ has to remember on which page the line went in a previous run.
+This information is written into the ~.aux~ file, and like a table of
+contents, you will not see the numbers until you run \LaTeX\ at least
+twice on the document.  Sometimes the information in the ~.aux~ file
+becomes invalid in a way that causes \lineno.sty to hang.  In such a
+case you'll have to delete all ~.aux~ files of the document to get it
+going again.
+
+You get this mode by
+\begin{itemize}\raggedright
+\item specifying the package option
+  ~[pagewise]~, but not ~[running]~,
+\item give the command ~\setpagewiselinenumbers~ in the document, or
+\item turn on line numbering with ~\pagewiselinenumbers~ or
+  ~\begin{pagewiselinenumbers}~. 
+\end{itemize}
+
+You cannot reset or preset the line numbers in \emph{pagewise} mode.
+This mode uses a different counter than \emph{running} mode.  You can
+switch between the mode, and the \emph{running} numbers will continue
+where they left of, unless you reset the counter.
+
+\subsubsection{Margin switching}
+
+As a side effect of all the business to find out on which page the lines
+end up, margin switching becomes possible.  It is now possible to
+print the line number differently on odd and even pages.  The command
+\begin{quote}
+  ~\switchlinenumbers~
+\end{quote}
+will cause the line numbers to be printed on the outer margins, on the
+right side for odd pages, and on the left side for even numbered
+pages.  If you add a star, the numbers go on the inner margins
+\begin{quote}
+  ~\switchlinenumbers*~
+\end{quote}
+You can achieve the same effect by specifying the package
+option ~[switch]~ or ~[switch*]~ together with ~[pagewise]~. 
+
+Margin switching is independent of any ~[twoside]~ option of the
+document class.
+
+\subsubsection{\emph{Running} mode with margin switching}
+
+Margin switching is not possible in \emph{running} mode, but you can
+abuse the pagewise mode to produce continuous line numbers.  This mode
+is activated with the command
+\begin{quote}
+  ~\runningpagewiselinenumbers~
+\end{quote}
+It is not possible to reset the line number counter for this mode, the
+lines will be numbered starting from one at the beginning of the
+document, and continue.  You can switch back to real pagewise mode with
+\begin{quote}
+  ~\realpagewiselinenumbers~
+\end{quote}
+but when you resume \emph{running-pagewise}, the numbers will not
+continue where they left off, but jump by the number of lines that
+were numbered \emph{real-pagewise}.
+
+The package options ~[switch]~ and ~[switch*]~ will turn on
+\emph{running pagewise} mode with margin switching, unless you also
+specify ~[pagewise]~.
+
+Finally, if you give these options together with ~[running]~, like
+\begin{quote}
+  ~\usepackage[switch,pagewise,running]{lineno}~
+\end{quote}
+the mode is set to plain \emph{running} line numbers, but later in
+your document, if you say ~\pagewiselinenumbers~, the setings of the
+~[switch]~ and ~[pagewise]~ options will take effect.
+
+\subsubsection{Page numbers}
+
+Any pages that contain \emph{pagewise} numbered lines must have a
+different page number.  This may cause trouble with titlepages or
+simmilar fudging with the page number counter in the document.  (I am
+talking about ~\c@page~ or ~\count 0~ here, not ~\thepage~).
+
+If you get strange errors, like \emph{``the use of} ~\nextLN~
+\emph{does not match its definition''}, you should first delete all
+~.aux~ files, and rerun \LaTeX\ several times.  If the error does not
+reappear, fine, else check your page numbers, including those that are
+not printed.  You may use \emph{running} line numbers on your
+titlepages, since the page boundaries are predefined, usually.
+
+\end{pagewiselinenumbers}
+
+\begin{linenumbers*}
+
+\subsection{Margin selection}
+
+In any mode you can select a fixed margin on which the numbers shall
+be printed.  You can either give a package option ~[left]~ or
+~[right]~, or change the margin within the document with
+\begin{quote}\obeylines
+  ~\leftlinenumbers~
+\rightlinenumbers
+  ~\rightlinenumbers~
+\end{quote}
+\rightlinenumbers
+Neither of these commands actually turns on line numbering.  The
+margin setting is changed for the currently selected mode
+\emph{running} or \emph{pagewise}.  If you want to set the margin for
+both modes, append a star
+\begin{quote}\obeylines
+  ~\leftlinenumbers*~
+  ~\rightlinenumbers*~
+\end{quote}
+The default is ~\leftlinenumbers*~.
+
+\end{linenumbers*}
+
+
+\subsection{Summary of mode selection commands}
+
+The following commands change the major line numbering mode.
+\begin{description}\itemsep=0pt\parskip=0pt
+\item [|\setrunninglinenumbers]
+\item [|\setpagewiselinenumbers] \leavevmode\\
+  set the current mode, without activating or deactivating line
+  numbering. 
+\item [|\runninglinenumbers\texttt{*[\NL}]
+\item [|\pagewiselinenumbers] \leavevmode\\
+  set the current mode and activate line numbering, optionally reset
+  (~*~), or set the line number for \emph{running} mode. 
+\end{description}
+The following commands do not change the major mode, but modify the
+the behaviour of \emph{pagewise} mode
+\begin{description}\itemsep=0pt\parskip=0pt
+\item [|\realpagewiselinenumbers]
+\item [|\runningpagewiselinenumbers] \leavevmode\\
+  select if \emph{pagewise} mode should number continuously, or really
+  pagewise.
+\end{description}
+
+
+\subsection{Summary of margin selection commands}
+
+The following command select into which margin the numbers should be
+printed 
+\begin{description}\itemsep=0pt\parskip=0pt
+\item [|\leftlinenumbers\texttt*]
+\item [|\rightlinenumbers\texttt*] \leavevmode\\
+  put the line numbers in the left/right margin in both modes.
+\item [|\leftlinenumbers]
+\item [|\rightlinenumbers] \leavevmode\\
+  put the line number into the left/right margin in the currently
+  selected mode.
+\item [|\switchlinenumbers] \leavevmode\\
+  put the line numbers into the outer margin, when using
+  \emph{pagewise} mode.
+\item [|\switchlinenumbers\texttt*] \leavevmode\\
+  put the line numbers into the inner margin, when using
+  \emph{pagewise} mode.
+\end{description}
+
+\begin{linenumbers*}
+\modulolinenumbers[2]
+
+\subsection{Numbering only one in five lines}
+
+You can ask lineno to print the line numbers only if they devide by
+<n>, by saying
+\begin{quote}
+  ~\modulolinenumbers[~<n>~]~
+\end{quote}
+If you omit the optional argument, it will be every fifth line, or
+whatever you used last (the current value of the counter
+~linenumbermodulo~).  You get the same effect by giving the package
+option ~[modulo]~.
+
+If you set <n> to 1, the modulo value is not changed, but modulo
+numbering is turned off.  
+
+Changing the counter ~linenumbermodulo~ does not turn on modulo
+numbering, it just changes the modulo, if it is turned on without the
+optional argument.
+
+This section of the manual is enclosed in
+\begin{quote}
+  ~\begin{linenumbers*}~ \\ 
+  ~\modulolinenumbers[2]~
+
+  ~\end{linenumbers*}~
+\end{quote}
+
+\end{linenumbers*}
+
+\begin{pagewiselinenumbers}
+\switchlinenumbers
+
+\subsection{How the line numbers look like}
+
+This section of the manual is enclosed in
+\begin{quote}
+ ~\begin{pagewiselinenumbers}~ \\
+ ~\switchlinenumbers~
+
+ ~\end{pagewiselinenumbers}~
+\end{quote}
+By default, the line numbers are set in
+\begin{quote}
+  ~\normalfont\tiny\sffamily~
+\end{quote}
+right justified to 10\,pt left of the nominal left edge of the text.
+If the number is to appear on the right margin, it is right justified
+to 20\,pt right of the nominal right edge of the text.
+
+You can easily change that, of course.  The font is defined by the
+macro
+\begin{quote}
+  ~\linenumberfont~
+\end{quote}
+You can redefine it to make the numbers appear in a differnt font
+(with ~\renewcommand~).  I'll say right here in this manual
+\renewcommand\linenumberfont{\normalfont\bfseries\small}
+\begin{quote}
+  ~\renewcommand\linenumberfont{\normalfont\bfseries\small}~
+\end{quote}
+The distance on the left margin can be changed with
+\begin{quote}
+  ~\setlength\linenumbersep{~<distance>~}~
+\end{quote}
+The distance on the right margin is ~\linenumbersep~ plus
+~\linenumberwidth~, both are set to 10\,pt by default.
+Let's do right here
+\setlength\linenumberwidth{1cm}
+\begin{quote}
+  ~\setlength\linenumbersep{1cm}~
+\end{quote}
+I put the command at the end of the paragraph, but it effects the
+whole paragraph, because that is where everything happens: at the end
+of the paragraphs.
+
+The line numbers are printed as arabic numerals, as defined in the
+macro
+\begin{quote}
+  ~\thelinenumber~
+\end{quote}
+for the \LaTeX\ counter ~{linenumber}~.  You can redefine that, as
+for any other \LaTeX\ counter.  E.g.,
+\renewcommand\thelinenumber{\roman{linenumber}}
+\begin{quote}
+  ~\renewcommand\thelinenumber{\roman{linenumber}}~
+\end{quote}
+(For heavy duty line numbering, you should use \LaTeX s internal
+format, e.g., ~\@roman\c@linenumber~.)
+
+\subsubsection{Deeper customization}
+
+The line number is attached to the line by the macro
+\begin{quote}
+  ~\makeLineNumber~
+\end{quote}
+which is expanded inside a zero width ~\hbox~ alligned to the
+origin of the current line (left edge, baselines alligned).  You can
+do anything in this macro.  Let's assume you do not want line numbers
+at all, but just attach something else to each line of text: this is
+the macro to modify.  You can refer to the line number by the macro
+~\LineNumber~, which prints the current value of the counter
+~{linenumber}~, or nothing if \emph{modulo} mode is active, and the
+number does not divide by ~{linenumbermodulo}~.  You should not modify
+this macro when using any form of \emph{pagewise} mode.  At the end of
+this paragraph I put the following
+\begin{runninglinenumbers}
+\renewcommand\makeLineNumber
+   {\hss$\rightarrow$\ \rlap{\hskip\textwidth\ $\leftarrow$}}
+\end{runninglinenumbers}
+\begin{quote}
+  ~\begin{runninglinenumbers}~\\
+  ~\renewcommand\makeLineNumber~\\
+  ~ {\hss$\rightarrow$\ \rlap{\hskip\textwidth\ $\leftarrow$}}~\\
+  ~\end{runninglinenumbers}~
+\end{quote}
+
+Redefining ~\makeLineNumber~ cuts deep into the linenumber mode
+setting.  If you still want to use the basic modes \emph{running} and
+\emph{pagewise} you should go one level up and modify one of the
+following macros, which are called by (or assigned to)
+~\makeLineNumber~ depending on the current mode, and with the counter
+~{linenumber}~ allready adjusted for the current page when using
+\emph{pagewise} mode.
+\begin{quote}\obeylines
+  ~\makeLineNumberRunning~
+  ~\makeLineNumberOdd~
+  ~\makeLineNumberEven~
+\end{quote}
+The first is used in \emph{running} mode, the other two in
+\emph{pagewise} mode.  If you modify those, you cut into the
+margin selection mechanism as advertised above.  You will have to call
+a mode selection command after changing these macros, to make them take
+effect (at least for ~\makeLineNumberRunning~).  
+
+You can go up one more step.  The margin selection commands redefine
+the above macros by making them equivalent (~\let~) to one of the
+following macros
+\begin{quote}\obeylines
+  ~\makeLineNumberLeft~
+  ~\makeLineNumberRight~
+\end{quote}
+You may redefine these, and afterwards issue a margin selection
+command followed by a mode selection command.  The default definitions
+are
+\begin{quote}
+  ~\def\makeLineNumberLeft~\\
+  ~  {\hss\linenumberfont\LineNumber\hskip\linenumbersep}~
+\end{quote}
+and
+\begin{quote}
+  ~\def\makeLineNumberRight~\\
+  ~  {\linenumberfont\hskip\linenumbersep\hskip\textwidth~\\
+  ~    \hbox to\linenumberwidth{\hss\LineNumber}\hss}~
+\end{quote}
+Whatever you do, use ~\LineNumber~ to print the digits.  This ensures
+that the modulo mode setting is acknowledged.  If you want to
+customize that as well, this is the macro to change.  ~\LineNumber~
+eventually refers to ~\thelinenumber~, which is the place to customize
+the numerals themselves.  At the end of this paragraph I said
+\renewcommand\LineNumber{\ifodd\value{linenumber} \thelinenumber)\fi}
+\begin{quote}
+   ~\renewcommand\LineNumber~\\
+   ~   {\ifodd\value{linenumber} \thelinenumber)\fi}~
+\end{quote}
+Line number references are not affected by ~\LineNumber~, but you
+should keep track of ~\thelinenumber~.  Look at the following
+reference
+\begin{quote}
+  The setion title of the next section is on page \pageref{ll1}, line
+  \ref{ll1}.
+\end{quote}
+There is a mismatch in the definition of ~\thelinenumber~, from the
+point of the refered line to the reference here.
+\end{pagewiselinenumbers}
+
+\begin{pagewiselinenumbers}
+
+\section[Line number references]
+        {Line number references\linelabel{ll1}}
+
+\lineno.sty allows to refer to a line number with ~\ref{~<label>~}~.
+The label is set by ~\linelabel{~<label>~}~, anywhere in a paragraph
+that gets line numbers.  If you put a ~\linelabel~ somewhere else, the
+line number it refers to is pretty meaningless, but no error message
+is issued.  (This section begins on line \ref{ll1}, page
+\pageref{ll1} and ends on line \ref{ll2}, page \pageref{ll2}.)
+
+References work both in \emph{running} and \emph{pagewise} modes.
+However, you have to be very careful when using both \emph{real
+  pagewise} mode and \emph{running pagewise} mode: The mode setting
+must be the same during reference as during labeling.
+
+The restrictions on placing a ~\linelabel~ are the same as for a
+~\marginpar~.  (In fact, they are implemented as fake ~\marginpar~s.)
+E.g., the linelabel on the section header of this chapter could not be
+placed in the straight forward way, because it would cause an error in
+the table of contents.  (It should be disabled during \emph{toc}
+processing.)  Instead, I typed
+\begin{quote}
+  ~\section[Line number references]~\\
+  ~        {Line number references\linelabel{ll1}}~
+\end{quote}
+This works fine, with the standard \LaTeX\ ~{article}~ document
+style.  If more generic markup is required, you should avoid things
+like this (you should avoid \lineno.sty altogether, in that case).
+
+~\linelabel~ does not work in display math.  (Why,  you do not use
+equation numbers?)
+
+The ~\linelabel~ command starts a new paragraph if it is issued after
+an empty line.  It will properly ignore further whitespace before the
+first word of text. Thus you can easily get a label to the first line
+of a paragraph.  
+
+Furthermore, ~\linelabel~ uses \LaTeX s standart tricks to avoid
+unnecessary spaces if you place is between two words with spaces
+around, but you should not do that anyway, if you want to make sure
+that the label applies to a certain word in the text.  You should
+attach the line label to the word in question without intervening
+spaces, either before of after the word.  If you leave spaces both
+before and after the ~\linelabel~ command, the current implemenation
+attaches the line label to the following word (by ignoring the
+trailing space).
+
+Special care should be taken at the end of a paragraph.  You better
+put the line label without intervening spaces behind the period, like
+this 
+\begin{quote}
+  ~This is the end of this section.%~\\
+  ~\linelabel{ll2}~
+\end{quote}
+This is the end of this section.%
+\linelabel{ll2}
+
+\end{pagewiselinenumbers}
+
+\begin{linenumbers*}
+
+
+\section{Known incompatibilities}
+
+This section will expand whenever somebody discovers problems when
+using \lineno.sty together with other \LaTeX\ packages.
+
+\subsection{\texttt{wrapfig.sty}}
+
+\lineno.sty used to have problems with \texttt{wrapfig.sty}, but this
+is solved but \lineno.sty, version 2.05.
+
+
+\section{Extension packages}
+
+The extension packages were abolished with version v3.00 of
+\lineno.sty.  One package, ~itemrule.sty~, was dropped, the others
+were put directly into the the main \lineno.sty package file.
+
+\subsection{Display math, \texttt{\itshape mlineno}}
+
+\lineno.sty does not work well with display math.  The parts of a
+paragraph preceeding a display math will not get line numbers.  The
+reason is that the paragraph is not finished, but the part above the
+display is broken into lines anyway.
+
+Let me demonstrate the effect.  This paragraph contains a
+~{displaymath}~ environment.  The part before the Formula does not get
+line numbers.  Here comes the Formula
+\begin{displaymath}
+    \mathrm{6\,H_2O + 6\,CO_2 \ \rightarrow\  C_6H_{12}O_6 + 6\,O_2}
+\end{displaymath}
+which makes the line numbers disappear.  The trailing part of the
+paragraph does get line numbers.  
+
+There are several means to solve the problem, but none of them is
+fully satisfactory.  \lineno.sty defines a ~{linenomath}~ environment,
+which can be wrapped around a display math to make the line numbering
+work.  This will work with any kind of display math, even if you use
+explicit ~$$~ pairs.  There is a ~*~-form ~{linenomath*}~ which also
+numbers the lines of the display itself, as good as it can.  Here
+comes an example use of ~{linenomath*}~
+\begin{linenomath*}
+\begin{eqnarray*}
+  b_1 &=& a_{11}x_1 + a_{12}x_2 \\
+  b_2 &=& a_{21}x_1 + a_{22}x_2   
+\end{eqnarray*}
+\end{linenomath*}
+wrapping an ~{egnarray*}~ like this
+\begin{quote}
+  ~\begin{linenomath*}~\\
+  ~  \begin{eqnarray*}~\\
+  ~    b_1 &=& a_{11}x_1 + a_{12}x_2 \\~\\
+  ~    b_2 &=& a_{21}x_1 + a_{22}x_2~\\   
+  ~  \end{eqnarray*}~\\
+  ~\end{linenomath*}~
+\end{quote}
+Specifying the package option ~[mathlines]~, causes the
+~{linenomath}~ environment to switch its function with its *-form.
+This allows you to later decide if you want the numbers on the formulas
+or not, without putting in stars everywhere (as long as you have been
+consistent).
+
+The ~{linenomath}~ wrapper does nothing if line numbering is not
+activated.  You do not need to remove them if you decide to omit the
+line numbering later (although you still have to load \lineno.sty).
+
+The \texttt{\itshape mlineno} extension redefines the standard \LaTeX\ 
+display math environments to wrap themselves automatically into
+~{linenomath}~:
+\begin{quote}\obeylines
+   ~\[~ ~\]~
+   ~{displaymath}~
+   ~{equation}~
+   ~{eqnarray}~
+   ~{eqnarray*}~
+\end{quote}
+As of version 3.00 you can activate this by the package option
+~[displaymath]~.  You can keep existing explicit ~{linenomath}~
+wrappers without harm.  
+
+This will probably not work with AMSmath.
+
+Other solutions to make \lineno.sty work with display math are either
+ugly or less stable.  The ugly possibility is to precede every display
+math with an empty line, or better with
+\begin{quote}
+  ~{\par\nobreak\noindent}~
+\end{quote}
+but this gains you nothing compared to using the ~{linenomath}~
+environment, since you still have to modify your document.
+
+\end{linenumbers*}
+
+
+\subsection{\texttt{\itshape rlineno}}
+
+\begin{runninglinenumbers}
+It is currently not possible to put a ~\linelabel~ into math mode.
+This should not impose problems with inline math, since you can attach
+the label just outside the math shift, like\linelabel{rll1} 
+\begin{quote}
+  ~... \linelabel{~<label>~}$x=f(y)$ ...~
+\end{quote}
+but to refer to a line in display math, you cannot label it directly. 
+\end{runninglinenumbers}
+
+\begin{pagewiselinenumbers}
+The extension \texttt{\itshape rlineno} offers a solution,
+allowing to refer to a line number with an offset.  
+
+This extension is now available with plain \lineno.sty v3.00.
+
+You put the ~\linelabel~ at the end of the preceeding line, and refer
+to that number, plus 1 or, in case of multiline displays, by any other
+offset.\linelabel{rll2}
+\begin{quote}
+  ~...\linelabel{~<label>~}~ \\
+  ~\begin{equation}~ \\
+  ~     y=f'(x)~ \\
+  ~\end{equation}~ \\
+  ~... the formula in line \lineref[+1]{~<label>~}~ 
+\end{quote}
+The offset calculation is different for pagewise or running line
+numbers, and you will have to make sure the right method is used. 
+\end{pagewiselinenumbers}
+
+The macro ~\lineref[~<offset>~]{~<label>~}~ uses the method of the
+currently selected mode (line numbering need not be activated).  To
+specify the mode explicitly, use ~\linerefr~ or ~\linerefp~ for
+running or pagewise mode respectively.
+
+For example, the manual sets a ~\linelabel{rll1}~ at the end of the
+line preceeding the single line quote environment at
+line\,\linerefr[+1]{rll1} in the first paragraph of this chapter, and
+refered to it via
+\begin{quote}
+  ~\linerefr[+1]{rll1}~
+\end{quote}
+and another one preceeding the quote environment in the second
+paragraph of this chapter, with the central line
+numbered\,\linerefp[+3]{rll2}, which I just refered to via
+\begin{quote}
+  ~\linerefp[+3]{rll2}~
+\end{quote}
+\begin{runninglinenumbers}
+If the correct mode is selected (e.g., ~\setrunninglinenumbers~),
+you can use ~\lineref[+1]{rll1}~ to refer to
+line\,\lineref[+1]{rll1}.
+\end{runninglinenumbers}
+
+
+\subsection{\texttt{\itshape numquote}}
+
+This extension defines two environments, each of them with a *-form or
+alternatively an optional argument.
+\begin{quote}\obeylines
+  ~\begin{numquote}~
+  ~\end{numquote}~
+\end{quote}
+is like ~{quote}~,
+\begin{quote}\obeylines
+  ~\begin{numquotation}~
+  ~\end{numquotation}~
+\end{quote}
+is like ~{quotation}~, but with the lines numbered.  Numbering
+restarts with 1 each time it is used, except you use the *-form, or
+specify the line number to start with in an optional argument.
+\begin{numquote}
+The line numbers set to the left of the text, indented by the same
+amount as the quote or quotation.  This works as expected even if the
+quote appears in a nested list. 
+\end{numquote}
+To customize the distance from the text or the shape of the
+numbers, you can modify the macros ~\quotelinenumbersep~ and
+~\quotelinenumberfont~ respectively.
+
+As of version 3.00, this is available directly with \lineno.sty.
+
+\clearpage
+
+\subsection{\texttt{\itshape ilineno}}
+\label{sec:ilineno}
+
+\begin{center}
+\noindent\fbox{\parbox{0.8\textwidth}{
+  \internallinenumbers \resetlinenumber[13]
+  Sometimes you need line numbers within a |\parbox\ or figure.  This
+  extension can do that, if the text is simple enough.  It works by
+  drawing a ladder of numbers next to the paragraph, each number
+  vertically separated by |\baselineskip\ from the other.  This
+  obviously dose not work nicely with anything but straight text.
+  Extra high lines (like this: $\displaystyle x=\frac AB$) will
+  disturb the alignment.  The power of \lineno.sty is not necessary to
+  achieve this, but you may need both in one document with a somewhat
+  coherent interface, and some of the necessary infrastructure from
+  \lineno.sty is actually useful.
+}}\end{center}
+% Why is the v-spacing wrong here?
+
+The preceding paragraph was set like this:
+\begin{quote}
+  ~\begin{center}\fbox{\parbox{0.8\textwidth}{~ \\
+    ~\internallinenumbers~ \\
+    ~\resetlinenumber[13]~ \\
+    ~ ~ Sometimes you need \dots \\
+  ~}}\end{center}~
+\end{quote}
+
+\subsection{\texttt{\itshape itemrule.sty}}
+
+Somebody asked me if he can get a rule next to an itemized item, from
+the bullet downwards.  This style did that.  It was unstable and of
+little interest, so it is gone from the \lineno.sty distribution.
+
+\subsection{\texttt{\itshape bframe}}
+\label{sec:bframe}
+
+\setlength\bframesep{10pt}
+\begin{bframe}
+\lineno.sty can be used for unexpected purposes.  The environment 
+\begin{quote}\obeylines
+  ~\begin{bframe}~
+  ~\end{bframe}~
+\end{quote}
+draws boxes around some text, even across page breaks.  At a page
+break, the box is open (it is difficult to fix that).  There are two
+parameters:
+\begin{description}\itemsep=0pt\parskip=0pt
+\item [|\bframesep] \leavevmode\\
+  defines the separation of the box from the text.
+\item [|\bframerule] \leavevmode\\
+  defines the thickness of the lines around the text.
+\end{description}
+
+It works by asking \lineno.sty to draw small rules left and right to
+the lines.  The total height of the rules is ~\baselineskip~ plus
+~\bframesep~. This leaves some extra space for extra high lines.
+
+The current version is very preliminary.  In a future version there
+may be a possibility to move the vertical lines inwards for indented
+text.  The box may optionally be closed at page breaks.  It will not
+likely be possible to have a colored background in the box, at least
+not with a graphics driver that cannot put a background behind
+existing foreground (Postscript cannot, I've been told).  Tell me how
+to make a gray background, like block dots on transparent, and I can
+do shaded boxes.
+
+\end{bframe}
+
+\section{How to print the documented source}
+
+\begin{bframe}
+\lineno.sty is written in three programming languages: \TeX, sh,
+and awk.
+
+The file can be loaded as a \LaTeXe\ package as it is.  However, if
+you feed it into a Unix shell, like
+\begin{quote}
+   ~csh>  source ./lineno.sty~
+\end{quote}
+it will produce the files ~lineno.tex~ and ~lineno.dvi~, which is the
+documented source of \lineno.sty.  If you want to learn how it works,
+or you need to adapt \lineno.sty for some special requirements, you
+should read that document.
+\end{bframe}
+
+\end{document}