rm fancybox, included in seminar

git-svn-id: svn://tug.org/texlive/trunk@4760 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 1399 deletions

diff --git a/Master/texmf-dist/doc/latex/fancybox/artistic.txt b/Master/texmf-dist/doc/latex/fancybox/artistic.txt
deleted file mode 100644
index 49be276f20d..00000000000
--- a/Master/texmf-dist/doc/latex/fancybox/artistic.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Preamble
-
-  The intent of this document is to state the conditions under which a
-  Package may be copied, such that the Copyright Holder maintains some
-  semblance of artistic control over the development of the package,
-  while giving the users of the package the right to use and distribute
-  the Package in a more-or-less customary fashion, plus the right to
-  make reasonable modifications.
-
-Definitions
-
-  "Package" refers to the collection of files distributed by the Copyright
-  Holder, and derivatives of that collection of files created through
-  textual modification.
-
-  "Standard Version" refers to such a Package if it has not been modified,
-  or has been modified in accordance with the wishes of the Copyright
-  Holder as specified below.
-
-  "Copyright Holder" is whoever is named in the copyright or copyrights
-  for the package.
-
-  "You" is you, if you're thinking about copying or distributing this
-  Package.
-
-  "Reasonable copying fee" is whatever you can justify on the basis
-  of media cost, duplication charges, time of people involved, and so
-  on. (You will not be required to justify it to the Copyright Holder,
-  but only to the computing community at large as a market that must
-  bear the fee.)
-
-  "Freely Available" means that no fee is charged for the item itself,
-  though there may be fees involved in handling the item. It also
-  means that recipients of the item may redistribute it under the same
-  conditions they received it.
-
-1. You may make and give away verbatim copies of the source form of the
-   Standard Version of this Package without restriction, provided that
-   you duplicate all of the original copyright notices and associated
-   disclaimers.
-
-2. You may apply bug fixes, portability fixes and other modifications
-   derived from the Public Domain or from the Copyright Holder. A Package
-   modified in such a way shall still be considered the Standard Version.
-
-3. You may otherwise modify your copy of this Package in any way,
-   provided that you insert a prominent notice in each changed file
-   stating how and when you changed that file, and provided that you do
-   at least ONE of the following:
-
-      a. place your modifications in the Public Domain or otherwise
-         make them Freely Available, such as by posting said modifications
-         to Usenet or an equivalent medium, or placing the modifications
-         on a major archive site such as uunet.uu.net, or by allowing the
-         Copyright Holder to include your modifications in the Standard
-         Version of the Package.
-
-      b. use the modified Package only within your corporation or
-         organization.
-
-      c. rename any non-standard executables so the names do not
-         conflict with standard executables, which must also be provided,
-         and provide a separate manual page for each non-standard
-         executable that clearly documents how it differs from the
-         Standard Version.
-
-      d. make other distribution arrangements with the Copyright
-         Holder.
-
-4. You may distribute the programs of this Package in object code or
-   executable form, provided that you do at least ONE of the following:
-
-      a. distribute a Standard Version of the executables and library
-         files, together with instructions (in the manual page or
-         equivalent) on where to get the Standard Version.
-
-      b. accompany the distribution with the machine-readable source of
-         the Package with your modifications.
-
-      c. give non-standard executables non-standard names, and clearly
-         document the differences in manual pages (or equivalent),
-         together with instructions on where to get the Standard Version.
-
-      d. make other distribution arrangements with the Copyright Holder.
-
-5. You may charge a reasonable copying fee for any distribution of
-   this Package. You may charge any fee you choose for support of this
-   Package. You may not charge a fee for this Package itself. However,
-   you may distribute this Package in aggregate with other (possibly
-   commercial) programs as part of a larger (possibly commercial)
-   software distribution provided that you do not advertise this Package
-   as a product of your own. You may embed this Package's interpreter
-   within an executable of yours (by linking); this shall be construed
-   as a mere form of aggregation, provided that the complete Standard
-   Version of the interpreter is so embedded.
-
-6. The scripts and library files supplied as input to or produced as
-   output from the programs of this Package do not automatically fall
-   under the copyright of this Package, but belong to whomever generated
-   them, and may be sold commercially, and may be aggregated with this
-   Package. If such scripts or library files are aggregated with this
-   Package via the so-called "undump" or "unexec" methods of producing
-   a binary executable image, then distribution of such an image shall
-   neither be construed as a distribution of this Package nor shall it
-   fall under the restrictions of Paragraphs 3 and 4, provided that you
-   do not represent such an executable image as a Standard Version of
-   this Package.
-
-7. C subroutines (or comparably compiled subroutines in other
-   languages) supplied by you and linked into this Package in order to
-   emulate subroutines and variables of the language defined by this
-   Package shall not be considered part of this Package, but are the
-   equivalent of input as in Paragraph 6, provided these subroutines do
-   not change the language in any way that would cause it to fail the
-   regression tests for the language.
-
-8. Aggregation of this Package with a commercial distribution is always
-   permitted provided that the use of this Package is embedded; that
-   is, when no overt attempt is made to make this Package's interfaces
-   visible to the end user of the commercial distribution. Such use
-   shall not be construed as a distribution of this Package.
-
-9. The name of the Copyright Holder may not be used to endorse or
-   promote products derived from this software without specific prior
-   written permission.
-
-10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
-  WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-  MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-The End
diff --git a/Master/texmf-dist/doc/latex/fancybox/fancybox.doc b/Master/texmf-dist/doc/latex/fancybox/fancybox.doc
deleted file mode 100644
index 43a7e46295b..00000000000
--- a/Master/texmf-dist/doc/latex/fancybox/fancybox.doc
+++ /dev/null
@@ -1,1268 +0,0 @@
-%% BEGIN fancybox.doc
-%%
-%% COPYRIGHT 1992, by Timothy Van Zandt, tvz@Princeton.EDU.
-%% For copying restrictions, see fancybox.sty.
-%%
-%% Documentation for fancybox.sty.
-%% Run through LaTeX, with or without the NFSS.
-%%
-\def\FileVersion{1.3}
-\def\FileDate{2000/09/19}
-%%
-%% This creates two temporary files: \jobname.ex1 and \jobname.tmp
-
-\documentclass[12pt]{article}
-
-\makeatletter
-
-%% INPUT FANCYBOX.STY HERE TO CHECK FILE VERSION.
-
-\usepackage{fancybox}
-
-\ifx\FileVersion\fileversion\else
-  \@latexerr{Fancybox style file and documentation do not have the same
-    version}\@ehd
-\fi
-
-%% DATES, VERSIONS AND TITLES:
-
-\def\expanddate#1/#2/#3/{\year=#1 \month=#2 \day=#3}
-\begingroup
-  \expandafter\expanddate\filedate/
-  \xdef\thefiledate{\today}
-\endgroup
-
-\title{Documentation for fancybox.sty:\\
-  Box tips and tricks for \LaTeX}
-\author{Timothy Van Zandt\\ tvz@Princeton.EDU}
-\date{Version \fileversion\\ \thefiledate}
-
-\def\@maketitle{%
- \begin{center}
-   {\Large\bf \@title \par}
-   \vskip 1.2em {\lineskip .5em
-   \begin{tabular}[t]{c}\@author\end{tabular}\par}
-   \vskip .8em {\@date}%
-  \end{center}
-  \par
-  \vskip .5em}
-
-%% PAGE STYLE:
-
-\pagestyle{myheadings}
-\if@twoside
-  \markboth{Documentation for fancybox.sty}%
-    {Version \fileversion, \thefiledate}%
-\else
-  \markright{fancybox.sty, Version \fileversion}
-\fi
-
-%% PAGE PARAMETERS:
-
-% Paragraphs are marked by large space rather than indentation:
-\parindent 0pt
-\parskip 7pt plus 1pt minus 1pt
-
-\setlength{\topmargin}{0pt}
-\setlength{\headheight}{12pt}        % height of running head
-\setlength{\headsep}{30pt}           % distance between header and text
-\setlength{\textheight}{8.2in}       % height of text on page
-
-%% TABLE OF CONTENTS
-
-\newskip\myskip
-
-\def\tableofcontents{%
-  \par\vfill
-  \begin{quote}
-    \begin{center} \Large\bf Contents \end{center}
-    \def\numberline##1{\hbox to 0pt{\hss##1\hskip 1em}}%
-    \let\oldaddvspace\addvspace
-    \def\addvspace##1{%
-      \myskip##1\relax
-      \oldaddvspace{.5\myskip}}
-    \@starttoc{toc}%
-  \end{quote}
-  \thispagestyle{empty}
-  \vfill
-  \clearpage}
-
-
-%% VERBATIM HACKS:
-
-\VerbatimFootnotes
-
-% Short meta (works in verbatim. Can't use < for other purposes.
-\catcode`\<=13 \def<#1>{{\rm\it #1\/}}    % <meta> (works in verbatim)
-
-% Short verbatim. " can appear in verbatim environments.
-\def\temp{\Verb"}
-\expandafter\def\expandafter\dospecials\expandafter{\dospecials\do\"}
-\catcode`\"=13
-\let"\temp
-
-% Verbatim item:
-\newcommand{\vitem}{\SaveVerb[{\def\bf{}\item[\UseVerb{\MyTemp}]}]{\MyTemp}}
-
-%% EXAMPLES:
-
-\setlength{\fboxsep}{6pt}
-
-\begin{VerbatimOut}{\jobname.ex1}
-% 1. Save example verbatim to \jobname.tmp,
-% 2. Input verbatim with \catcode`\"=14 (" is a comment).
-% 3. Input again with \catcode\`"=9 (" is ignored).
-
-\renewcommand{\EveryVerbatimLine}[2]{}
-
-\renewcommand{\EveryVerbOutLine}[2]{}
-
-\newcommand{\BeginExample}{%
-  \VerbatimEnvironment\begin{VerbatimOut}{\jobname.tmp}}
-
-\newcommand{\EndExample}{%
-  \end{VerbatimOut}%.
-  \renewcommand{\EveryVerbatimLine}{}%
-  \renewcommand{\EveryVerbatimCodes}{\catcode`\"=14}%
-  \LVerbatimInput{\jobname.tmp}%
-  \catcode`\"=9}
-
-\newenvironment{example}{\BeginExample}{\EndExample
-  \begin{center}\input{\jobname.tmp}\end{center}}
-
-\newenvironment{example*}{\BeginExample}%
-  {\EndExample \input{\jobname.tmp}}
-
-\newenvironment{example**}{\BeginExample}%
-  {\EndExample \globaldefs=1 \input{\jobname.tmp}}
-
-\end{VerbatimOut}
-
-\input{\jobname.ex1}
-
-%% END PREAMBLE:
-\makeatother
-
-\begin{document}
-\setcounter{page}{0}
-\maketitle
-\begin{quote}
-"fancybox.sty", together with its documentation, gives extensive answers to
-and solutions for many questions about how to frame or rotate this or that in
-\LaTeX. It also contains commands for shadow, double and oval frames.
-\end{quote}
-
-\tableofcontents
-
-\section{Fancy frames}
-
-"fancybox.sty" has five variants of \LaTeX's "\fbox" command:
-\begin{quote}\raggedright
-"\shadowbox", "\doublebox", "\ovalbox" (with "\thinlines") and "\Ovalbox"
-(with "\thicklines").
-\end{quote}
-Here are examples:\footnote{In this documentation, the default value of
-"\fboxsep" has been changed from 3pt to 6pt.}
-\begin{example}
-  \shadowbox{\large\bf New Glarus Birdwatch}
-\end{example}
-\begin{example}
-  \doublebox{\large\bf New Glarus Birdwatch}
-\end{example}
-\begin{example}
-  \ovalbox{\large\bf New Glarus Birdwatch}
-\end{example}
-\begin{example}
-  \Ovalbox{\large\bf New Glarus Birdwatch}
-\end{example}
-
-The distance between the box and the frame is "\fboxsep", as with \LaTeX's
-"\fbox" command. The commands use other parameters as well:
-\begin{description}
-\vitem"\shadowbox" The width of the frame is "\fboxrule" (the same as with
-"\fbox"). The width of the shadow is "\shadowsize" (default: "4pt").
-
-\vitem"\doublebox" The width of the inner frame is .75"\fboxrule", and the
-width of the outer frame is 1.5"\fboxrule". The distance between the two
-frames is 1.5"\fboxrule" plus .5pt.
-
-\vitem"\ovalbox" The width of the frame is set by the "\thinlines"
-declaration. The diameter of the corner arcs is set with the "\cornersize"
-command.
-\begin{LVerbatim}
-  \cornersize{<num>}
-\end{LVerbatim}
-sets the diameter of the corners arcs to <num> times the lessor of the width
-and height of the box.
-\begin{LVerbatim}
-  \cornersize*{<dim>}
-\end{LVerbatim}
-sets the diameter of the corner arcs to <dim>. This is all approximate,
-because \LaTeX\ has a limited range of arc sizes to choose from. The default
-is
-\begin{LVerbatim}
-  \cornersize{.5}
-\end{LVerbatim}
-
-\vitem"\Ovalbox" This is like "\ovalbox", except that the width of the lines
-is set by the "\thicklines" declaration.
-\end{description}
-
-There are no analogs to \LaTeX's "\framebox" command, which has various
-optional arguments not supported by "\fbox". You can get the exact same
-functionality by putting the argument of the above framing commands in a
-"\makebox".
-
-There is also a variant "\fancyoval" of \LaTeX's "\oval" picture object. The
-difference is that "\oval" always makes the diameter of the corner arcs as
-large as possible, and "\fancyoval" uses the "\cornersize" command to set the
-diameter.
-
-\section{A short course on boxes}
-
-\begingroup\sloppy
-The "\shadowbox", "\doublebox", "\ovalbox" and "\Ovalbox" commands described
-in the previous section are examples of LR-box commands, meaning that their
-argument is processed in LR mode. \LaTeX\ LR-box commands include "\mbox",
-"\makebox", "\fbox", "\framebox", "\sbox" and "\savebox". All the PSTricks
-commands whose argument is text are LR-box commands, including, e.g, the
-framing, rotating, scaling and positioning commands, and some of the node
-commands. Any rotation command is an LR-box command.
-
-\endgroup
-
-The purpose of the rest of this documentation is to provide answers to, and
-solutions for, frequently asked questions about using LR-box commands with
-\LaTeX. I will use "\fbox" for the leading example of a box framing
-command,\footnote{In the examples using "\fbox", be aware that the default
-value of "\fboxsep" has been changed in this documentation from 3pt to 6pt.}
-and "\rotateleft" for the leading example of a box rotation command.
-("fancybox.sty" does not contain a "\rotateleft" command, as this must be
-implemented via "\special"'s, but there are numerous box-rotation style files
-around.) However, most of what is said here applies to any LR-box command.
-
-In each LR-box command, the text is processed in restricted horizontal mode,
-which is referred to as ``LR-mode'' in Lamport's {\em \LaTeX: User's Guide and
-Reference Manual}. In restricted horizontal mode, the input, consisting of
-regular characters and boxes, is made into one (long or short) line. There is
-no line-breaking, nor can there be vertical mode material such as an entire
-displayed equation. However, the fact that you can include another box means
-that this isn't really a restriction.
-
-For one thing, alignment environments such as \LaTeX's "tabular" are just
-boxes, and thus present no problem. Picture environments and the LR-box
-commands themselves are also just boxes. Entire paragraphs or other vertical
-mode material such as displayed equations can be nested in a "\parbox" or
-"minipage".
-
-\section{Defining LR-box environments}
-
-To frame a "minipage", you have to write
-\begin{LVerbatim}
-  \fbox{%
-    \begin{minipage}{3in}
-      blah
-    \end{minipage}}
-\end{LVerbatim}
-You might want to define an environment "fminipage" that frames its contents,
-but you can't use
-\begin{LVerbatim}
-  \newenvironment{fminipage}%
-    {\fbox{\begin{minipage}}%
-    {\end{minipage}}}
-\end{LVerbatim}
-because the braces are not balanced in the definition.
-
-"fancybox.sty" contains an "Sbox" environment that makes it easy to define
-your own LR-box environments. It is a variant of \LaTeX's "\sbox" command that
-saves the contents of the environment in a storage bin that can be retrieved
-with the command "\TheSbox".\footnote{The difference between
-\begin{LVerbatim}
-  \begin{Sbox}
-    blah
-  \end{Sbox}
-  \TheSbox
-\end{LVerbatim}
-and
-\begin{LVerbatim}
-  \newsavebox{\mybox}
-  \sbox{\mybox}{blah}
-  \usebox{\mybox}
-\end{LVerbatim}
-is that "Sbox" saves the contents globally, and "\TheSbox" erases the contents
-globally.}
-For example, here is a framed minipage:
-\begin{LVerbatim}
-  \begin{Sbox}
-    \begin{minipage}{3in}
-      blah
-    \end{minipage}
-  \end{Sbox}
-  \fbox{\TheSbox}
-\end{LVerbatim}
-and here is an "fminipage" environment that works:
-\begin{example**}
-  \newenvironment{fminipage}%
-    {\begin{Sbox}\begin{minipage}}%
-    {\end{minipage}\end{Sbox}\fbox{\TheSbox}}
-\end{example**}
-Let's see that it really works:
-\begin{example}
-  \begin{fminipage}{2in}
-    Since the former doesn't use braces to delimit
-    the contents of the box, $\ldots$
-  \end{fminipage}
-\end{example}
-
-
-\section{Math}
-
-In-line math, or pieces of a displayed equation (as opposed to a whole
-equation), are horizontal mode material, but most LR-box commands switch out
-of math mode when they occur in math mode. Thus, you have to explicitly switch
-back in to math mode when desired.\footnote{This is {\em not} true for the
-PSTricks LR-box commands.}
-For example:
-\begin{example}
-  $x + y = \fbox{$\Omega$}$
-\end{example}
-
-You also have to explicitly write
-\begin{quote}
-  "\scriptstyle", "\scriptscriptstyle" or "\displaystyle"
-\end{quote}
-if you want one of these special math styles. For example, here I will frame
-an equation, but not the equation number:
-\begin{example*}
-  \begin{equation}
-    \fbox{$\displaystyle
-      \int_{\Omega_0} \zeta(\omega) d\omega
-      \geq \bar{r}$}
-  \end{equation}
-\end{example*}
-
-Entire displayed equations or "eqnarray" environments work differently because
-they are vertical mode material. Thus, they have to go inside a "\parbox" or
-"minipage". E.g.,
-\begin{example*}
-  \newlength{\mylength}
-  \[
-    \setlength{\fboxsep}{15pt}
-    \setlength{\mylength}{\linewidth}
-    \addtolength{\mylength}{-2\fboxsep}
-    \addtolength{\mylength}{-2\fboxrule}
-    \fbox{%
-      \parbox{\mylength}{
-        \setlength{\abovedisplayskip}{0pt}
-        \setlength{\belowdisplayskip}{0pt}
-        \begin{equation}
-          x + y = z
-        \end{equation}}}
-  \]
-\end{example*}
-The outer "\[" "\]" are just used to display the boxed equation, rather than
-actually switch into math mode. Note how I set the width of the "\parbox" so
-that the displayed box would exactly have width "\linewidth".\footnote{That is
-what "\mylength" is for. It is better to define a single scratch length that
-you reuse rather than creating a new one each time.}
-
- I also set the display skips to "0pt" and increased the size of "\fboxsep" so
-that I would have the same distance all around between the equation and the
-frame.
-
-This is again a mouthful, and so I might instead define:\footnote{The reason
-for using "\minipage" instead of "\begin{minipage}", and so on, is that with
-AmS-\LaTeX, "\begin" and "\end" cannot appear in the definition of a new
-equation environment.}
-\begin{example**}
-  \newenvironment{FramedEqn}%
-    {\setlength{\fboxsep}{15pt}
-      \setlength{\mylength}{\linewidth}%
-      \addtolength{\mylength}{-2\fboxsep}%
-      \addtolength{\mylength}{-2\fboxrule}%
-      \Sbox
-      \minipage{\mylength}%
-         \setlength{\abovedisplayskip}{0pt}%
-         \setlength{\belowdisplayskip}{0pt}%
-         \equation}%
-    {\endequation\endminipage\endSbox
-      \[\fbox{\TheSbox}\]}
-\end{example**}
-"fancybox.sty" doesn't bother defining any such environments, because there
-are too many possible designs. But let's see if the one above works:
-\begin{example*}
-  \begin{FramedEqn}
-    \Rightarrow P\sim\xi(P_\gamma)- \frac{1}{3}
-  \end{FramedEqn}
-\end{example*}
-
-"fancybox.sty" contains a "Beqnarray" environment, which is like the
-"eqnarray" environment but it is not vertical mode material. Instead, it
-produces a box just large enough to hold all the equations. For example:
-\begin{example}
-  \fbox{%
-    \begin{Beqnarray*}
-      x & = & y\\
-      y & > & x \\
-      \int_4^5 f(x)dx & = & \sum_{i\in F} x_i
-    \end{Beqnarray*}}
-\end{example}
-The unstarred version produces standard equation numbers on the right (even
-with the "leqno" style option and AmS-\LaTeX). It might not work with special
-equation numbering macros.
-
-
-\section{Floats}\label{floats}
-
-A common mistake is to put a whole "table", "figure" or other float
-environment inside an LR-box command. Instead, you should put everything that
-is {\em inside} the environment (including the "\caption", if you want that
-boxed too) inside a "minipage" of the desired width, and then put the
-"minipage" inside the LR-box command.
-
-For example:
-\begin{example*}
-  \begin{table}[h]
-    \begin{center}
-      \fbox{%
-        \begin{minipage}{.8\textwidth}
-          \begin{center}
-            \begin{tabular}{rl}
-              foo & bar
-            \end{tabular}
-          \end{center}
-          \caption{A table of foo and bar.}
-        \end{minipage}}
-    \end{center}
-  \end{table}
-\end{example*}
-Note how I had to use "center" twice: once to center the framed box, and again
-to center the stuff inside the box.
-
-That is a mouthful, and so I might define a "FramedTable" environment like the
-following, which sets the size of the "minipage" so that the framed box is
-exactly the width of the page (no need for the first "center" environment this
-time):
-\begin{example**}
-  \newenvironment{FramedTable}%
-    {\begin{table}[h]
-      \begin{Sbox}%
-      \setlength{\mylength}{\textwidth}%
-      \addtolength{\mylength}{-2\fboxsep}%
-      \addtolength{\mylength}{-2\fboxrule}%
-      \begin{minipage}{\mylength}}%
-    {\end{minipage}\end{Sbox}\fbox{\TheSbox}\end{table}}%
-\end{example**}
-Now let's see if it works:
-\begin{example*}
-  \begin{FramedTable}
-    \begin{center}
-      \begin{tabular}{rl}
-        foo & bar
-      \end{tabular}
-    \end{center}
-    \caption{A table of foo and bar.}
-  \end{FramedTable}
-\end{example*}
-
-The most common reason to want to rotate an entire float, caption and all, is
-to put it on a page by itself in landscape mode, centered both horizontally
-and vertically. Compared to the table framing we did above, we just have to
-replace "\fbox" by our box rotation command (e.g., "\rotateleft" or whatever),
-set the width of the minipage to "\textheight" (if you want to use the full
-size of the page), and use the float position specifier "[p]". "fancybox.sty"
-contains an environment,
-\begin{LVerbatim}
-  \begin{landfloat}{<float>}{<rotation command>}
-    ...
-  \end{landfloat}
-\end{LVerbatim}
-that automates this. It has two arguments: the name of the floating
-environment, and your rotation command. For example, if "\rotateleft{foo}"
-rotates "foo" by 90 degrees, and you want a landscape mode "table", then try
-\begin{LVerbatim}
-  \begin{landfloat}{table}{\rotateleft}
-    ...
-  \end{landfloat}
-\end{LVerbatim}
-If the whole document is in landscape mode, then "landfloat" gives you a
-portrait-mode float---good for a table that is too tall to fit in landscape
-mode.
-
-If you don't add a caption to a float, it doesn't matter much what floating
-environment you use (e.g., "table", "figure" or whatever). Thus, you can put
-anything in a landscape float. For example, suppose I have a very wide
-equation. Then I can write:
-\begin{LVerbatim}
-  \begin{landfloat}{table}{\rotateleft}
-    \begin{equation}
-      ...
-    \end{equation}
-  \end{landfloat}
-\end{LVerbatim}
-"fancybox.sty" defines a generic caption, "\GenericCaption", that doesn't
-affect the numbering of floats, doesn't make an entry in a list of floats, and
-doesn't add anything to the argument you give. I could have used this if I
-wanted to add a caption to the previous example.
-
-\section{Center, flushleft and flushright}
-
-There are two ways to box a "center", "flushleft" or "flushright" environment.
-If you have long lines and you want \TeX\ to do the line breaking, then put
-the environment inside a "minipage".\footnote{List and other such environments
-work best inside a "minipage" environment rather than a "\parbox".} If you
-have short lines and you want the frame to adjust itself to the size of the
-longest line, then use "fancybox.sty"'s
-\begin{quote}
-  "Bcenter", "Bflushleft" or "Bflushright"
-\end{quote}
-environment instead.
-
-These are basically just "tabular" environments with a single column, and so
-each line should end with "\\", or "\\["<dim>"]" to insert extra space, and
-the text on each line must be balanced. Also, each line is sitting in its own
-group, and so, e.g., if you want to change the font for the whole environment,
-you should do this before the environment rather than after.
-Like the "tabular" environment, the box that is produced has the baseline at
-the center, unless you include an optional argument "[t]" to align the box
-with the top line or "[b]" to align the box with the bottom line.
-
-For example:
-\begin{example}
-  \setlength{\fboxsep}{10pt}%
-  \fbox{%
-    \begin{Bcenter}
-      Love of life\\
-      and other short stories\\
-      by Policarpa Salabarrieta
-  \end{Bcenter}}
-\end{example}
-Compare this with:
-\begin{example}
-  \setlength{\fboxsep}{10pt}%
-  \fbox{%
-    \begin{minipage}{6cm}
-    \begin{center}
-      Love of life and other short stories
-      by Policarpa Salabarrieta
-    \end{center}
-    \end{minipage}}
-\end{example}
-
-In either case, if we want the resulting framed box centered, we have to
-include it inside another "center" environment.
-
-Here is another example:
-\begin{example}
-  My list: \fbox{%
-    \begin{Bflushleft}[b]
-      Galanga root\\
-      Coconut\\
-      Tempeh
-    \end{Bflushleft}}
-\end{example}
-
-
-\section{Lists}
-
-There are again two ways to box a list environment such as
-\begin{quote}
-  "itemize", "enumerate" or "description".
-\end{quote}
-You can put it in a "minipage" of pre-determined size and let \TeX\ do the
-line breaking, or you can use
-\begin{quote}
-  "Bitemize", "Benumerate" or "Bdescription"
-\end{quote}
-instead, and let the box adjust to the size of the longest line.
-
-For example.
-\begin{example}
-  \fbox{%
-    \begin{Bitemize}
-      \item Groceries
-      \item Clean hamster cages
-      \item Pick up Peter
-    \end{Bitemize}}
-\end{example}
-
- Most of the usual list parameters are irrelevant except for "\itemsep" and
-"\labelsep". These environments are also based on the "tabular" environment,
-and so each item should be balanced text. You can't write "\vspace{4pt}"
-either, but you can insert an extra amount of space before an item by writing
-"\item(4pt)" (or "\item(4pt)[label]" if you have a label). Also, you can break
-lines within an item using "\\" or "\\[<dim>]". For example:
-\begin{example}
-  \fbox{%
-    \begin{Bdescription}
-      \item[David] Groceries
-      \item[Eli]  Hamster cages\\
-                  Surreal numbers
-      \item(3pt)[Doris] Pick up Peter
-    \end{Bdescription}}
-\end{example}
-
-These environments also have an optional argument, "[t]" to align the box with
-the top line, and "[b]" to align the box with the bottom line.
-\begin{example}
-  To do:
-  \fbox{\setlength{\itemsep}{0pt}%
-    \begin{Benumerate}[t]
-      \item Groceries
-      \item Hamster cages
-      \item Pick up Peter
-    \end{Benumerate}}
-\end{example}
-
-There is also a generic "\Blist" command that is analogous to \LaTeX's
-"\list".  It has the same two obligatory arguments, plus a third optional
-"[t]" or "[b]" argument for changing the alignment.
-
-\section{Superimposing boxes}
-
-The command
-\begin{LVerbatim}
-  \boxput*(<x>,<y>){<LR stuff1>}{<LR stuff2>}
-\end{LVerbatim}
-puts <LR stuff1> either behind (the default) or in front of (with the "*") <LR
-stuff2>.\footnote{You will only notice the difference between "\boxput" and
-"\boxput*" if you are using color implemented by "\special"'s} The resulting
-box has the dimensions of <LR stuff2>.
-
-The coordinates "(<x>,<y>)" determine where the center of <LR stuff1> is
-positioned. For example, "(0,0)" puts it at the center of <LR stuff2>, "(0,1)"
-puts it at the center-top, and "(-1,-1)" puts it in the bottom-left corner.
-
-More generally, the origin of the coordinate system is at the center of <LR
-stuff2>, one unit in the vertical direction is half the vertical size of <LR
-stuff2>, and one unit in the horizontal direction is half the width of <LR
-stuff2>. Thus, <x> and <y> should always be numbers (without units such as
-"pt" or "cm"), with one exception: If <y> is "b" or "B", <LR stuff1> is
-positioned vertically at the baseline of <LR stuff2>. "(<x>,<y>)" is
-optional---the default is "(0,0)".
-
-Except for the funny coordinate system, "\boxput" is like the "\put" command
-in a "picture". In particular, you can use "\makebox" in <LR stuff1> to
-fine-tune the positioning, and <LR-stuff1> can contain a "picture"
-environment.
-
-You might use "\boxput" to put a ``water mark'' in the background of a box, or
-to put a label next to a box, when you don't want this label to take up any
-space. Here is a lazy example:
-\begin{example}
-  \boxput{\makebox(0,0){\Huge Censored!}}{\parbox{3in}{%
-    The origin of the coordinate system is at the center of
-    {\em LR stuff2}, and one unit in the x-direction
-    is half the width of {\em LR stuff2}.}}
-\end{example}
-
-This would be a lot more interesting using PSTricks, with ``Censored!'' in the
-foreground, rotated 30 degrees, and red:
-\begin{LVerbatim}
-  \boxput*{\rput{30}{\Huge\red Censored}}{\parbox{3in}{%
-    blah blah}}
-\end{LVerbatim}
-
-Here is another example using PSTricks:
-\begin{LVerbatim}
-  \newcommand{\titledframe}[2]{%
-    \boxput*(0,1){\psframebox*{#1}}%
-      {\psframebox[framesep=12pt]{#2}}}
-\end{LVerbatim}
-\newcommand{\titledframe}[2]{%
-  \boxput*(0,1){#1}%
-    {\fboxsep=12pt \fbox{#2}}}
-The following example illustrated roughly how it works, but ``My title'' does
-not blot out the frame behind it because this documentation does not use
-PSTricks. \begin{example}
-  \titledframe{My title}{%
-    \parbox{2in}{The title is superimposed
-      on the top part of the frame.}}
-\end{example}
-
-\section{Framing a whole page}
-
-The commands
-\begin{LVerbatim}
-  \fancyput*(<x>,<y>){<LR stuff>}
-  \thisfancyput*(<x>,<y>){<LR stuff>}
-\end{LVerbatim}
-are pretty much like "\put" commands in a \LaTeX\ picture environment whose
-origin is 1 inch down and to the right from the top left corner of the
-page.\footnote{Don't blame me for \TeX's peculiar 1 inch margins.} The only
-differences are that (i) that any LR-mode material is permitted (including
-\LaTeX\ "picture" environment, of course), (ii) the coordinate is optional
-"(0pt,0pt)" is substituted by default), and (iii) if the coordinate is
-included, you {\em must} specify the units.
-
-"\thisfancyput" affects only the current page, and is a global declaration
-(analogous to "\thispagestyle").
-
-If you include the optional "*", then the command adds to, rather than
-replaces, other things that have been inserted with "\fancyput" or
-"\thisfancyput".
-
-These commands are particularly useful for framing a page, because you can get
-a frame that is, e.g., 1 inch from each side of the physical page without
-having to worry about what margins you are using for the document. Here is an
-example:
-\begin{example*}
-  \thisfancyput(3.25in,-4.5in){%
-    \setlength{\unitlength}{1in}\fancyoval(7,9.5)}
-\end{example*}
-You could also use "\fancyput" to add some kind of ``watermark'' or background
-image (e.g., a light gray ``DRAFT'').
-
-There are other commands that directly frame or in some other way box the page
-of text:
-\begin{LVerbatim}
-  \fancypage{<cmds1>}{<cmds2>}
-  \thisfancypage{<cmds1>}{<cmds2>}
-\end{LVerbatim}
-
-Each finished page, before adding the headers and footers, (and thus having
-width and height "\textwidth" and "\textheight", is boxed with
-\begin{LVerbatim}
-  <cmds1>{<pagebox>}
-\end{LVerbatim}
-Thus, <cmds1> should be, or should end with, a command whose argument can be a
-box, such as "\fbox" or "\rotateleft".
-
-Then the headers and footers are added, using the new width of the page, and
-this is boxed with
-\begin{LVerbatim}
-  <cmds2>{<pagebox>}
-\end{LVerbatim}
-The same rules apply to <cmds2> as to <cmds1>.
-
-Here is an example:
-\begin{example*}
-  \thisfancypage{%
-    \setlength{\fboxsep}{8pt}%
-    \setlength{\shadowsize}{8pt}%
-    \shadowbox}{}
-\end{example*}
-
-{\bf Warning:} The commands described in this section change \LaTeX's output
-routine, and may not work with document styles that do the same. Also, bad
-arguments can cause serious errors with uninformative error messages.
-
-\section{Switching to landscape mode midstream}
-
-The most common reason to switch to landscape mode midstream is to rotate a
-float, such as a table or figure. This was discussed in Section \ref{floats}.
-
-If you want to rotate one or more pages, without rotating the headers and
-footers, use the
-\begin{LVerbatim}
-  \begin{LandScape}{<cmd>}
-    ...
-  \end{LandScape}
-\end{LVerbatim}
-environment. <cmd> should be the command for rotating the page 90 degrees to
-the left or right. (E.g., "\rotateleft", or "\rotate[l]".)
-
-If you want to rotate the headers, footers and margins as well, use the
-\begin{LVerbatim}
-  \begin{Landscape}{<paperwidth>}{<paperheight>}{<cmd>}
-    ...
-  \end{Landscape}
-\end{LVerbatim}
-environment (the small "s" makes the difference) to rotate the pages left
-(counterclockwise), and use the "Landscape*" environment (same arguments) to
-rotate the pages right (clockwise). The three arguments are the width of the
-paper, the height of the paper, and the rotation command you are using. For
-example, if I have a portrait mode document using the US 8.5in by 11in paper,
-and if "\rotateleft{foo}" rotates "foo" 90 degrees counterclockwise, then I
-can write
-\begin{LVerbatim}
-  \begin{Landscape}{8.5in}{11in}{\rotateleft}
-\end{LVerbatim}
-
-You can use "\LandScape", "\Landscape" and "\Landscape*", rather then the
-"LandScape", "Landscape" and "Landscape*" environments, if you want the rest
-of the document to be in landscape mode.
-
-If your document is being printed in landscape mode, then these environments 
-switch to portrait mode.
-
-For example, suppose I have a landscape mode document, and I want to switch to
-portrait mode for the rest of the document, rotating the pages to the
-``right'' with "\rotateright". Then I would write
-\begin{LVerbatim}
-  \Landscape*{11in}{8.5in}{\rotateright}
-\end{LVerbatim}
-
-These environments switch the text width and height, leaving the margins
-exactly as they were before. It is quite possible that you want to make other
-changes to the page parameters after switching to landscape mode, but as
-Lamport points out the \LaTeX\ {\em User's Guide and Reference Manual}, this
-generally doesn't work right in the middle of the document. "fancybox.sty" has
-a command "\UsePageParameters" which gets around this. It should be used right
-after you change the page parameters (and the page parameter changes should
-come right after the beginning of the landscape environment, or "\clearpage").
-
-{\bf Warning:} The commands and environments described in this section change
-\LaTeX's output routine, and may not work with document styles that do the
-same. Also, bad arguments can cause serious errors with uninformative error
-messages.
-
-\section{Verbatim}
-
-If you try to frame some verbatim text by typing
-\begin{LVerbatim}
-  \fbox{%
-    \begin{minipage}{5cm}
-      \begin{verbatim}
-        \My \Program \Listing
-        if { foo } { bar } fi
-      \end{verbatim}
-    \end{minipage}}
-\end{LVerbatim}
-you will get nonsense at best. This is because the argument to "\fbox" is read
-before the "\begin{verbatim}" is processed. But then it is too late for \TeX\
-to go back and interpret the contents of the verbatim environment literally
-rather than as special \TeX\ commands and characters.
-
-One solution is to use the "Sbox" environment:
-\begin{example}
-  \begin{Sbox}
-  \begin{minipage}{5cm}
-  \begin{verbatim}
-  \My \Program \Listing
-  if { foo } { bar } fi
-  \end{verbatim}
-  \end{minipage}
-  \end{Sbox}
-  \setlength{\fboxsep}{8pt}
-  \fbox{\TheSbox}
-\end{example}
-
-"fancybox.sty" also contains a command that ``fixes'' \LaTeX's LR-box commands
-for use with verbatim text:
-\begin{LVerbatim}
-  \VerbBox{<cmd>}{<LR stuff>}
-\end{LVerbatim}
-This is like
-\begin{LVerbatim}
-  <cmd>{<LR stuff>}
-\end{LVerbatim}
-but <LR stuff> can contain verbatim text.\footnote{Or other tricks that
-involve "\catcode" changes, as occurs with some foreign language macros.} For
-example:
-\begin{example}
-  \VerbBox{\fbox}{\verb+\foo{bar}+}
-\end{example}
-
-For footnotes, put the command "\VerbatimFootnotes" in the preamble, and then
-you can use verbatim commands or environments in the argument of "\footnote".
-This is an optional feature because it might conflict with somebody else's
-modification of the footnote system.
-
-If you try to define your own framed verbatim environment with
-\begin{LVerbatim}
-  \newenvironment{FramedVerb}%
-    {\begin{Sbox}\begin{minipage}{5in}\begin{verbatim}}
-    {\end{verbatim}\end{minipage}\end{Sbox}
-      \setlength{\fboxsep}{8pt}\fbox{\TheSbox}}
-\end{LVerbatim}
-and then type
-\begin{LVerbatim}
-  \begin{FramedVerb}
-    if { foo } { bar } fi
-  \end{FramedVerb}
-\end{LVerbatim}
-you will again run into trouble because after the "\begin{verbatim}", \LaTeX\
-is searching for the literal string "\end{verbatim}" as the end of the
-verbatim text. It just skips right over the "\end{FramedVerb}" and may well
-continue to the end of the file or until it throws up.
-
-"fancybox.sty" contains some verbatim environments that get around this
-problem and that have other advantages for LR-boxing verbatim listings, when
-compared to the standard \LaTeX\ "verbatim" environment. Admittedly, many of
-their special features have nothing to do with boxes.
-
-Here are the basic verbatim environments:
-\begin{description}
-  \vitem"Verbatim" Works pretty much like \LaTeX's "verbatim".
-  \vitem"LVerbatim" Like "Verbatim", but "list" rather than "trivlist" is used
-to display the listing, and so it is indented from the left margin. (This is
-what I am using for verbatim listings in this document.)
-  \vitem"BVerbatim[<pos>]" Produces a box with the same width as the longest
-verbatim line. The baseline is in the center, unless you include the optional
-argument "[t]" for alignment with the top line or "[b]" for alignment with the
-bottom line.
-  \vitem"VerbatimOut{<file>}" Writes the verbatim text to <file>.
-  \vitem"SaveVerbatim{<cmd>}" Saves the verbatim text as <cmd>. <cmd> is
-defined globally, without checking whether <cmd> is already defined. Use
-obviously innocuous names like "\MyTemp".
-\end{description}
-
-{\bf Important:} For any of these verbatim environments, or new verbatim
-environments you define yourself (see below), nothing should come after
-"\begin{Verbatim}" or before "\end{Verbatim}" on the same line --- not even
-spaces!%
-  \footnote{If you need to allow something to come before "\end{Verbatim}",
-then you have two options:
-  \begin{itemize}
-  \item Put the command "\AltGetVerbatim" in the preamble. This switches to a
-scheme where anything preceding "\end{Verbatim}" is simply ignored. This can
-cause problems if you do really weird things with active characters or other
-commands within the verbatim environment (e.g., active conditionals that are
-not balanced within a line of verbatim text), but in this case you are
-probably a good enough hacker to use the next option.
-  \item "\EndVerbatimTokens" is a token register that you can set to the
-tokens that should precede "\end{Verbatim}" on the same line, with their
-verbatim "\catcode"'s.
-  \end{itemize}}
-If you put something after "\begin{Verbatim}" on the same line, it is simply
-ignored. However, if you put something after "\end{Verbatim}" on the same
-line, or if you misspell "\end{Verbatim}", you will get an error such as
-\begin{LVerbatim}
-  ! File ended while scanning use of \Verbatim.
-\end{LVerbatim}
-and the document will end at that point.
-
-You can define new verbatim environments using "\newenvironment". You just
-have to start the definition with
-\begin{LVerbatim}
-  \VerbatimEnvironment
-\end{LVerbatim}
- For example, here is the framed verbatim environment we tried earlier:
-\begin{example**}
-  \newenvironment{FramedVerb}%
-    {\VerbatimEnvironment
-      \begin{Sbox}\begin{minipage}{5cm}\begin{Verbatim}}%
-    {\end{Verbatim}\end{minipage}\end{Sbox}
-      \setlength{\fboxsep}{8pt}\fbox{\TheSbox}}
-\end{example**}
-Let's give it a try:
-\begin{example}
-  \begin{FramedVerb}
-  if { foo } { bar } fi
-  \end{FramedVerb}
-\end{example}
-
-Here are three commands for inputting a whole file verbatim. The file must end
-with a new line.
-\begin{description}
-  \vitem"\VerbatimInput{<file>}" Like "\Verbatim".
-  \vitem"\LVerbatimInput{<file>}" Like "\LVerbatim".
-  \vitem"\BVerbatimInput[<pos>]{<file>}" Like "\BVerbatim".
-\end{description}
-
-Here are three commands for making use of verbatim text that has been saved to
-a command:
-\begin{description}
-  \vitem"\UseVerbatim{<cmd>}" Like "\Verbatim".
-  \vitem"\LUseVerbatim{<cmd>}" Like "\LVerbatim".
-  \vitem"\BUseVerbatim[<pos>]{<cmd>}" Like "\BVerbatim".
-\end{description}
-The "SaveVerbatim" environment and the "\UseVerbatim" commands are useful for 
-including verbatim text in the argument of "\marginpar", "\fbox" and other
-commands. For example, here is another way to define the "FramedVerb"
-environment:
-\begin{LVerbatim}
-  \newenvironment{FramedVerb}%
-    {\VerbatimEnvironment
-      \begin{SaveVerbatim}{\MyTemp}}%
-    {\end{SaveVerbatim}%
-      \setlength{\fboxsep}{8pt}%
-      \fbox{\begin{minipage}{5cm}\UseVerbatim{\MyTemp}
-        \end{minipage}}}
-\end{LVerbatim}
-
-Here are some verbatim commands for short-pieces of (in-line) verbatim text:
-\begin{description}
-  \vitem"\Verb<char> <literal> <char>" \ \\
-  Like \LaTeX's "\verb" command, but it will complain if it encounters a new
-line in <literal>.\footnote{Be careful that your word processing does not
-insert one for you.} For example:
-\begin{example*}
-  "\begin{quote}
-  The main use for the \Verb+SaveVerbatim+
-  environment and the \Verb+\UseVerbatim+
-  commands is to include $\ldots$
-  "\end{quote}
-\end{example*}
-  \vitem"\UseVerb{<cmd>}" Like "\UseVerbatim", but without any particular
-formatting. It is intended for including short pieces of literal text saved
-with "\SaveVerb" (below).\footnote{But it can also be used for multiple lines
-saved with the "SaveVerbatim" environment if you want to do the formatting
-yourself. E.g., try this in a tabbing environment with "\VerbatimTab"
-appropriately defined.}
-  \vitem"\SaveVerb[<whatever>]{<cmd>}<char> <literal> <char>"\ \\
-  This is like "\Verb", but it saves <literal> as <cmd>, and then returns to
-the optional argument <whatever>. Like the "SaveVerbatim" environment, it
-defines <cmd> globally without checking whether <cmd> is already defined.
-Without the optional argument, the most common use is for including verbatim
-text in a "\marginpar", "\section" or other command argument.
-
-  The optional argument can be used for special tricks. For example, all the
-listings of commands in this documentation use "\vitem" in a "description"
-environment, where "\vitem" is defined by:\footnote{The braces enclosing the
-optional argument of "\SaveVerb" prevent the "]" inside the argument from
-being mistaken for the end of the argument.}
-\begin{LVerbatim}
-  \newcommand{\vitem}%
-    {\SaveVerb[{\item[\UseVerb{\MyTemp}]}]{\MyTemp}}
-\end{LVerbatim}
-Whereas
-\begin{LVerbatim}
-  \item[\Verb"\foo"]
-\end{LVerbatim}
-would not work because after "\item" reads its argument it is too late to
-interpret "\foo" literally,
-\begin{LVerbatim}
-  \vitem"foo"
-\end{LVerbatim}
-does work because it is equivalent to
-\begin{LVerbatim}
-  \SaveVerb{\MyTemp}"foo"\item[\UseVerb{\MyTemp}]
-\end{LVerbatim}
-\end{description}
-
-
-These environments and commands use various parameters that make it easy to
-customize their behavior. However, until you want to find the need for such
-customization, you might as well ignore the rest of this section.
-
-Internally, "fancybox.sty" separates the reading and formatting of verbatim
-text. Most of the environments and commands perform both functions, but
-"SaveVerbatim" and "\SaveVerb" only read the text, while "UseVerbatim" (and
-company) and "\UseVerb" only format the text. "VerbatimOut" gets special
-treatment. The parameters that apply to each class of verbatim environment or
-command is listed in Table \ref{verbtable}.
-
-\begin{table}
-\begin{center}
-\renewcommand{\arraystretch}{0}
-\setlength{\tabcolsep}{7pt}
-\newcommand{\vs}{& \\[\tabcolsep]}
-\newcommand{\VS}{\\ \vs \hline \vs}
-\begin{tabular}{|l|l|}
-\hline \vs
-{\em Where} & {\em What}
-\\ \vs \hline
-\hline \vs
-  \begin{Bflushleft}
-    Environments\\
-    that format
-  \end{Bflushleft}
-&
-  \begin{Bflushleft}
-    "\VerbatimSpace"\\
-    "\VerbatimTab"\\
-    "\VerbatimFont"\\
-    "\VerbatimFuzz"\\
-    "\EveryVerbatimLine"\\
-    "\EveryVerbatim"\\
-    "\ThisVerb"
-  \end{Bflushleft}
-\VS
-  \begin{Bflushleft}
-    Environments\\
-    that read
-  \end{Bflushleft}
-&
-  \begin{Bflushleft}
-    "\EveryVerbatimCodes"\\
-    "\ThisVerbCodes"
-  \end{Bflushleft}
-\VS
-  \begin{Bflushleft}
-    "\Verb" and\\
-    "\UseVerb"
-  \end{Bflushleft}
-&
-  \begin{Bflushleft}
-    "\VerbSpace"\\
-    "\VerbTab"\\
-    "\VerbFont"\\
-    "\EveryVerb"\\
-    "\ThisVerb"
-  \end{Bflushleft}
-\VS
-  \begin{Bflushleft}
-    "\Verb" and\\
-    "\SaveVerb"
-  \end{Bflushleft}
-&
-  \begin{Bflushleft}
-    "\EveryVerbCodes"\\
-    "\ThisVerbCodes"
-  \end{Bflushleft}
-\VS
-  \begin{Bflushleft}
-    "VerbatimOut"
-  \end{Bflushleft}
-&
-  \begin{Bflushleft}
-    "\EveryVerbOutCodes"\\
-    "\ThisVerbCodes"\\
-    "\EveryVerbOutLine"\\
-    "\ThisVerb"
-  \end{Bflushleft}
-\\ \vs \hline
-\end{tabular}
-\caption{Parameters for the verbatim environments and
-commands.\label{verbtable}}
-\end{center}
-\end{table}
-
-All the parameters, including "\VerbatimFuzz", are ordinary commands, and
-should be changed with "\renewcommand".
-
-Here is a description of each of the parameters for environments that format
-the verbatim text:
-\begin{description}
-  \vitem"\VerbatimSpace" The insertion text for spaces. The default is "\ ",
-which produces a blank space. Change it to "\ttspace" to get \ttspace.
-  \vitem"\VerbatimTab" The insertion text for tabs. The default is
-\begin{LVerbatim}
-  \ \ \ \ \ \ \ \
-\end{LVerbatim}
-  \vitem"\VerbatimFont" The font to use for verbatim text. The default is
-"\tt"
-  \vitem"\VerbatimFuzz" This is the amount by which lines can be too long in a
-"Verbatim" or "LVerbatim" environment before you get overfull "\hbox"
-warnings. This threshold is usually .1pt, but the default definition of
-"\VerbatimFuzz" is "2pt" because verbatim lines won't break and are therefore
-often too long.
-  \vitem"\EveryVerbatimLine" This is inserted at the beginning of each line of
-verbatim environments or verbatim files. By default it does nothing. I like to
-indent each line in the verbatim environment in the input file by 2 spaces, so
-I define
-\begin{LVerbatim}
-  \renewcommand{\EveryVerbatimLine}[2]{}
-\end{LVerbatim}
-to eat those spaces. (But I have to remember to put in two spaces or space
-markers for blank lines too.) You might also use it to number the lines. For
-example:
-\begin{example}
-  \newcounter{VerbLineNo}
-  \renewcommand{\EveryVerbatimLine}%
-    {\makebox[10pt][r]{%
-       \stepcounter{VerbLineNo}%
-       \tiny\rm\arabic{VerbLineNo}}%
-    \hspace{10pt}}
-  \renewcommand{\EveryVerbatim}%
-    {\setcounter{VerbLineNo}{0}}
-  \begin{SaveVerbatim}{\MyTemp}
-  \setlength{\fboxsep}{15pt}
-  \setlength{\mylength}{\linewidth}
-  \end{SaveVerbatim}
-  \fbox{\BUseVerbatim{\MyTemp}}
-\end{example}
-  \vitem"\EveryVerbatim" Whatever else you want to say before formatting the
-verbatim text. By default, it does nothing.
-  \vitem"\ThisVerb" This is executed before any of the commands above, and
-then its value is cleared. Use this to customize a single verbatim formatting
-environment.
-\end{description}
-
-Here is a description of the parameters for environments that read the
-verbatim text:
-\begin{description}
-  \vitem"\EveryVerbatimCodes" This command is inserted just before reading the
-verbatim text. Use it to play with "\catcode"'s (see the {\em \TeX book}). For
-example, I might type
-\begin{LVerbatim}
-  \renewcommand{\EveryVerbatimCodes}{\catcode`\"=14}
-\end{LVerbatim}
-if I want to use \Verb+"+ as a comment character in verbatim text.%
-%% The use of SaveVerbatim and \SaveVerb is not necessary here because
-%% \VerbatimFootnotes is in effect. This is just a test.
-\begin{SaveVerbatim}{\MyTemp}
-  \def\MyQuote{"}    % \MyQuote is now the character ",
-  \def\temp{\Verb"}  %    in case I need it.
-  \catcode`\"=13     % Now " is like a command.
-  \let"\temp         % Now "foo" is like \Verb"foo"
-  \def\do{\noexpand\do\noexpand}      % Now " can be used in verbatim
-  \edef\dospecials{\dospecials\do\"}  % environments anyway.
-\end{SaveVerbatim}\SaveVerb{\Foo}+"+\SaveVerb{\FFoo}+\Verb"foo"+%
-\footnote{Here is another "\catcode" trick. We make \UseVerb{\Foo} a short
-verbatim command, so that we can say \UseVerb{\Foo foo\Foo} instead of
-\UseVerb{\FFoo}:
-\LUseVerbatim{\MyTemp}}
-  \vitem"\ThisVerbCodes" This command is executed before "\EveryVerbCodes",
-and then it is cleared. Use this to fool with the "\catcode"`s of a single
-verbatim environment.
-\end{description}
-
-The parameters for "\Verb", "\UseVerb" and "\SaveVerb" and the "VerbatimOut"
-environment are analogous to the similar commands for other environments.
-
-Here is an example of the use of "\ThisVerb" to define a variant of "\Verb"
-that uses \ttspace\ to mark spaces:
-\begin{LVerbatim}
-  \newcommand{\SVerb}{%
-    \renewcommand{\ThisVerb}%
-      {\renewcommand{\VerbatimSpace}{\ttspace}}%
-    \Verb}
-\end{LVerbatim}
-
-Finally, without further comment, here are the definitions of the "example"
-and "example*" environments that were used for the examples in this document:
-{\renewcommand{\EveryVerbatimLine}{}\LVerbatimInput{\jobname.ex1}}
-
-\section{Changes}
-\raggedright
-
-\paragraph*{Version 0.9, November 23, 1992} First release.
-
-\paragraph*{Version 0.91, November 25, 1992}
-\begin{enumerate}
-  \item "\shadowsize" is now a length, to be set with "\setlength" or
-"\addtolength".
-  \item "\fancypage" split into "\fancypage" and "\fancyput"
-\end{enumerate}
-
-\paragraph*{Version 0.92, December 20, 1992}
-\begin{enumerate}
-  \item New "\boxput" command for superimposing boxes.
-  \item New "\VerbatimFootnotes" command.
-  \item New "\VerbBox" command for verbatim boxes.
-  \item New "Sbox" environment. Makes "\beginsbox" and "\endsbox"
-    obsolete, but the latter have been retained for compatibility.
-\end{enumerate}
-
-\paragraph{Version 0.93, January 20, 1993}
-\begin{enumerate}
-  \item New "\EndVerbatimTokens" for tokens that precede "\end{Verbatim}".
-  \item New "\AltGetVerbatim", to allow any tokens to precede
-"\end{Verbatim}".
-  \item Fixed bug in "\BVerbatimInput" that caused second line to be repeated.
-  \item New "LandScape" environment, for rotating pages without rotating
-headers and footers.
-  \item Slide frames "Oval", "oval", "shadow" and "double" are defined when
-"seminar.sty" v0.93 (and maybe later) is loaded.
-\end{enumerate}
-
-\paragraph{Version 1.0, February 10, 1993}
-\begin{enumerate}
-  \item Fixed bugs in "\boxput".
-  \item New "Beqnarray" environment.
-\end{enumerate}
-
-\paragraph{Version 1.1, 1997 (D.G./S.R.)}
-\begin{enumerate}
-  \item Minimal adaptations for \LaTeX{} 2e compatibility (macros
-  "\fancypage", "\thisfancypage", "\fancyput", "\thisfancyput",
-  "\@Landscape", "\LandScape").
-\end{enumerate}
-
-\paragraph{Version 1.2, February 27, 1998 (D.G./S.R.)}
-\begin{enumerate}
-  \item Other adaptations for \LaTeX{} 2e.
-\end{enumerate}
-
-\paragraph{Version 1.3, September 19, 2000 (D.G./S.R.)}
-\begin{enumerate}
-  \item Corrections of the output routine for \LaTeX{} 2e compatibility
-  (from Marcin Wolinski and Heiko Oberdiek).
-  \item Add a "\ProvidesPackage" command (from Heiko Oberdiek).
-\end{enumerate}
-
-\end{document}
-%% END fancybox.doc