cmpj (5sep11)

git-svn-id: svn://tug.org/texlive/trunk@23833 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 808 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/cmpj/template.tex b/Master/texmf-dist/doc/latex/cmpj/template.tex
new file mode 100644
index 00000000000..950cbfe2e1a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/cmpj/template.tex
@@ -0,0 +1,808 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%                                                                      %%%
+%%%    INSTITUTE FOR CONDENSED MATTER PHYSICS                            %%%
+%%%                                                                      %%%
+%%%    Template for preparing an article for publication                 %%%
+%%%    in the Condensed Matter Physics journal <cmp@icmp.lviv.ua>        %%%
+%%%    using LaTeX2e                                                     %%%
+%%%                                                                      %%%
+%%%    Last time modified: August 28, 2011                               %%%
+%%%                                                                      %%%
+%%%    Copyright (C) 2011 by the Institute for Condensed Matter Physics  %%%
+%%%                      of the National Academy of Sciences of Ukraine  %%%
+%%%                                                                      %%%
+%%%    This file can be redistributed and/or modified under the terms    %%%
+%%%    of the LaTeX Project Public License (lppl).                       %%%
+%%%                                                                      %%%
+%%%    Please report errors to: Andrij Shvaika                           %%%
+%%%                             ashv (a) icmp lviv ua                    %%%
+%%%                                                                      %%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\documentclass[intlimits,twoside,a4paper]{article}
+
+\usepackage{amsmath,amssymb}
+\usepackage{graphicx}
+\usepackage{wrapfig}
+
+\usepackage[T2A]{fontenc}
+\usepackage[cp1251]{inputenc}
+%
+%% Support for Ukrainian language. Comment two lines above if you do 
+%% not use Ukrainian.
+
+
+\usepackage[eqsecnum]{cmpj}
+%% Field in square brackets is optional. Use it for equation numbering 
+%% by sections.
+
+\articletype{Regular article}
+
+%% If the title of your article is longer than 45 characters please 
+%% indicate its short form (optional argument) which goes into the 
+%% running head.
+
+
+%
+\title[Short title: Template and instructions]%
+{Long title: Template and instructions to the authors%
+\thanks{``\ldots{}I wouldn't stand
+by and see the rules broken -- because right is right, and wrong
+is wrong, and a  body ain't got no business doing wrong when he
+ain't ignorant and knows better.'' \protect\\ [0.9ex] \strut\qquad
+Twain~M., The Adventures of Huckleberry Finn. 1884.}}
+%
+\author[Short authors list]{A.U. Thor\refaddr{label1,label2},
+        B.U. Thor\refaddr{label2}, \ldots}
+\addresses{
+\addr{label1} Ornstein University, 1 Rain Str., 10041 Celsius, Softland
+\addr{label2} Zernike Institute, 2 River Ave., 20451 Fahrenheit, Solidshire
+}
+%
+%% or for single author or if all authors are from the same institute:
+%
+%  \author[Short authors list]{1st Author, 2st Author, \ldots}
+%  \address{Institute}
+%
+%% Fields in square brakets (short title and short authors list) are
+%% optional. Use them if your entries exceeds 45 characters.
+%
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+These instructions describe how to prepare and submit an article
+using \LaTeX{} and \texttt{cmpj.sty} for publishing in
+``Condensed Matter Physics'' journal. Each submitted manuscript
+should contain an abstract reflecting the essence of the study.
+The abstract will be published separately from the article in a
+variety of bibliographical services so it should be completely
+self-contained (\emph{no footnotes or numbered references}).
+Extremely important references may be incorporated into the
+abstract itself: [Thor~A.U. et al., Condens. Matter Phys., 2004,
+\textbf{7}, 111]. The abstract should be written as a single
+paragraph not exceeding 150 words. Mathematical expressions are
+discouraged. Please define all nonstandard symbols and
+abbreviations.
+%
+\keywords Up to six keywords
+%
+\pacs Up to six PACS numbers
+\end{abstract}
+
+
+
+
+\section{Editorial process: from submission to offprints}
+
+This guide is intended to help in preparing \LaTeX{} compuscripts
+for publication in ``Condensed Matter Physics'' (hereinafter CMP)
+journal. We appreciate your effort to follow our style in
+preparing your article for mutual benefit: speedier publication,
+greater accuracy and higher quality. Below is a description of the
+features of CMP style. In addition, you will find some general 
+advice and specific remarks on preparing your compuscripts.
+
+Authors are encouraged to submit their manuscripts electronically,
+through the Editorial Office at \href{mailto:cmp@icmp.lviv.ua}{\texttt{cmp@icmp.lviv.ua}}.
+Third-party submissions cause excessive problems. Author
+self-submissions are exceedingly preferred. Please send articles as
+attachments to e-mail messages. All appropriate files (\LaTeX{}
+sources and figure files) should be combined into a single archive. 
+However, if the size of files exceeds 5~MB a multi-part archive 
+should be created. Then every part of the archive should be sent 
+separately with a clear description 
+(e.g. ``Manuscript of A.U.~Thor et al., part~1 of~5'' etc.). 
+All information about the submission should be included in
+the main body of the message. This must include: full name, postal
+and e-mail addresses, telephone and fax numbers of the
+corresponding author, the full title of the article, the full list
+of authors and the full list of files in the attached archive(s).
+
+Please check your article carefully for accuracy, consistency and
+clarity before submission. Ask someone else (preferably native
+speaker or person with perfect knowledge of English) to read the
+manuscript, however satisfied you may be with its quality. Your
+colleague can often find errors or obscure passages missed by the
+author.
+
+Compuscripts should be coded in \LaTeXe{} with the \verb|article| class,
+preferably using the CMP style available at the journal Web page
+\\
+\centerline{\href{http://www.icmp.lviv.ua/journal/src/cmpj.zip}{\texttt{http://www.icmp.lviv.ua/journal/src/cmpj.zip}}}
+\\
+%Instructions how to use style files are in the \verb|readme| file.
+Manuscript should be arranged in the following order: title of
+article, short title of not more than 45~characters, author's name
+and affiliation, abstract (up to 150~words), up to six key words
+and PACS numbers, text of the article, acknowledgements,
+appendices and references. At the end of the document or in
+separate file the contributors are asked to provide title,
+author's name and institute, abstract and key words in Ukrainian
+(see subsection \ref{ua-part}). Figures and tables should be
+included in the text where they have appeared or at the end of the
+article.
+
+The Editorial Office acknowledges receipt of a compuscript by
+e-mail to the corresponding author. All contributions will be
+evaluated according to the standard procedures of peer review,
+usually by two referees. Only contributions which meet the
+scientific and formal standards of the journal can be accepted for
+publication. The Editorial Office will send an acceptance letter
+to the corresponding author. Proofs are provided in the form of
+PDF files after preparing an article for publishing by the production
+department. Authors should prepare a list of necessary corrections
+as soon as possible and e-mail it to the Editorial Office. All
+articles are freely available in electronic forms (PS, PDF)
+at the journal Web page:
+\\
+\centerline{\href{http://www.icmp.lviv.ua/journal/}{\texttt{http://www.icmp.lviv.ua/journal/}}}
+
+We look forward to receiving your articles!
+
+
+
+
+\section{Style guide}
+
+
+\subsection{Title information}
+
+The manuscript should begin with the title of the paper in lower
+case letters except for proper nouns, certain abbreviations,
+physical quantities, chemical symbols etc. The use of nonstandard
+abbreviations and acronyms is not allowed. Unnecessary words in
+the title should be dropped. The title is followed by the names of
+all authors (with first name initials) and the corresponding
+institutions (from the smallest to the largest unit, e.g. group,
+department, university) with addresses, as given in the above
+example (street or P.O. box, city with zip codes, country).
+Countries should be written in English. There are two slightly
+different forms of affiliations in the CMP style depending on
+whether all authors work in the same institution. The
+corresponding author electronic mail address and optionally phone
+and fax numbers can be placed in a footnote. Dates of receipt of
+original and revised versions will be added by the Editorial
+Office.
+
+An abstract should accompany each manuscript; it should
+be completely self-contained, not exceeding 150 words and
+written as a single paragraph. Mathematical expressions
+should be avoided.
+
+Up to six keywords should at a glance give a general idea of the
+article to a reader. PACS numbers (up to six classification codes) 
+\emph{must} be given.
+Please use the full, permanently updated classification system which
+is available online at
+\\
+\centerline{\href{http://publish.aps.org/PACS/}{\texttt{http://publish.aps.org/PACS/}}}
+\\
+There should be no more than six numbers, the principal number
+should be placed first, and the check characters should always be
+included.
+
+
+\subsection{Main body of the paper}
+
+The CMP style makes use of the conventional \LaTeX{} document
+layout so below we will only point out peculiarities of the style
+and some important general features (see also
+section~\ref{tex-issues} for \TeX{}-related issues).
+
+The body of the paper should be divided into sections, subsections
+etc. (however, in short papers sections may not be necessary)
+using standard \LaTeX{} commands. Text should be typed as usual.
+Compounded words like ``semi-infinite, $a$-axis'' are separated by
+a short hyphen ``\verb|-|'', the en-dash ``\verb|--|'' is used in
+number ranges (12--21) and em-dash ``\verb|---|''~--- in sentences. Please, make
+a difference between left and right quotes (\verb|`| vs. \verb|'|
+or \verb|``| vs. \verb|''|, respectively) instead of using the
+symbol \verb|"| everywhere. \emph{Emphasized text} is obtained with
+the command \verb|\emph{...}|. Extra or exceptional hyphenations
+are added by means of the
+command \verb|\hyphenation|, which should be placed in the
+preamble of the document.
+
+Use \verb|\label| and \verb|\ref| for cross-references to
+equations, figures, tables, sections, subsections, etc., instead of
+plain numbers. The \verb|\label| instruction should be typed
+immediately after (or one line below), but not inside the argument
+of a number-generating instruction such as \verb|\section| or
+\verb|\caption|, roughly in the position where the number appears,
+in environments such as \texttt{equation}, \texttt{figure},
+\texttt{table}, etc.
+
+A limited number of private definitions should be placed in the
+preamble of the article, and not at any other place in the
+document. Such private definitions, i.e. definitions made using
+the commands \verb|\newcommand| and \verb|\newenvironment|, should
+be used with great care. Large macro packages should be avoided.
+Definitions that are not used in the article should be omitted. Do
+not change existing environments, commands and other standard
+parts of \LaTeX{}. A short description of the various definitions,
+in the form of \TeX{} comment lines, is appreciated. Deviation
+from these rules may cause inaccuracies in the article or a delay
+in publication.
+
+Footnotes should be avoided whenever possible. If required they
+should be used only for brief notes that do not fit conveniently
+into the text. The standard \LaTeX{} macro \verb|\footnote| should
+be used and will normally give an appropriate symbol.
+
+Your article will be read by many people whose native language is
+not English so keep sentences as short and simple as possible.
+UK~English spellings are preferred (colour, flavour, behaviour,
+tunnelling, artefact, focused, focusing, fibre, etc.). Using of
+``-ize'' spellings is encouraged (diagonalize, renormalization,
+minimization, etc.). The words ``table'', ``figure'', ``equation''
+and ``reference'' should be written in full and \emph{not}
+contracted to ``Tab.'', ``Fig.'', ``eq.'' and ``Ref.''
+
+
+
+
+\subsection{Mathematical material}
+
+\subsubsection{General advice}
+
+For in-line formulas use \verb|\(...\)| or \verb|$...$|:
+$E_{\textrm{F}}$, \(T_{\textrm{C}}=123\)~K. Avoid built-up
+constructions, for example fractions, matrices, integrals, sums,
+etc., in in-line formulas. For unnumbered displayed one-line
+formulas use the \verb|displaymath| environment or the shorthand
+notation \verb|\[...\]|. For numbered displayed one-line formulas
+use the equation environment. Do \emph{not} use \verb|$$...$$|,
+but only the \LaTeX{} environments, so that the document style
+determines the formula layout. For example, the definition of
+Dirac $\delta$-function in the Fourier representation looks like
+\begin{equation}
+\label{delta-def}
+\delta(x) = \frac{1}{2\pi}
+           \int_{-\infty}^{\infty} \re^{\ri sx}
+           \rd s,
+\end{equation}
+where the expression $\re^{\ri sx}$ is tolerable but the exponents
+with more complex arguments should be replaced by $\exp({\ri sx})$.
+For displayed multi-line formulas use the standard \verb|eqnarray| environment or \verb|align| one of the \AmS-\LaTeX{} bundle.
+For example,
+\begin{align}
+\Delta^{(+)} &\equiv 1-\Theta (\varphi^{(+)}_1 Q_{11}+\varphi^{(+)}_4 Q_{22})
+-\Theta (\varphi^{(+)}_2 +\varphi^{(+)}_3) Q_{12}
+\nonumber\\
+&+\Theta^2 (Q_{11}Q_{22}-Q_{12}^2)(\varphi^{(+)}_1 \varphi^{(+)}_4 -
+\varphi^{(+)}_2 \varphi^{(+)}_3)=0.
+\label{multi-line}
+\end{align}
+Please note that the equation number stands in the last line of the
+multi-line mathematical expression numbered as a whole.
+
+Keep in mind that an \emph{empty} line in \TeX{} sources starts
+a \emph{new} paragraph! So do \emph{not} separate mathematical
+environments (and other too!) by empty lines unless you do
+\emph{want} start a paragraph at this place!
+
+
+
+
+
+\subsubsection{Roman vs. italic}
+
+
+In mathematics mode \LaTeX{} automatically sets variables in a
+math italic font. Such an italicization should be accepted in
+general. However, there are some cases where it is better to use a
+Roman font to mark a special meaning of certain symbols: the Euler
+number ``$\re$'', ``$\ri$'' when used as imaginary
+unit ($\ri=\sqrt{-1}$), differential ``$\rd$'', and
+the operators ``$\Im$'' and ``$\Re$'' for the
+imaginary and real parts of complex numbers, respectively [see
+equation~(\ref{delta-def}) for example] and \verb|cmpj.sty| provides commands \verb|\re|, \verb|\ri|, \verb|\rd|, \verb|\Im|, and \verb|\Re| for typesetting such symbols, respectively.
+
+Mathematical functions, such as \verb|cos|, \verb|sin|, etc.,
+should appear in Roman type. \LaTeX{} provides built-in commands for
+most of these functions (e.g.\ \verb|\cos| and \verb|\sin|, respectively).
+
+Subscripts and superscripts should be in Roman type if they are
+labels rather than variables or characters that take values:
+$k_{\textrm{B}}$ (Boltzmann constant), $E_{\textrm{F}}$ (Fermi energy),
+$T_{\textrm{C}}$ (Curie temperature) and $c_{\textrm{ion}}$ (ion concentration).
+
+Units (e.g. V/cm or V~cm$^{-1}$, K, Pa, etc.) should be written in text mode
+(not in math environment) with a nonbreakable space to the number before:
+$T_{\textrm{C}}=123$~K. Symbols of chemical elements are also typed in text mode:
+H$_2$O, Ca$^{2+}$, $^{14}$N$_2$, etc.
+
+
+\subsection{A few miscellaneous remarks}
+
+Mathematical expressions are rather sophisticated object to type out.
+Below there is a list of the most simple and most common errors which one
+should avoid.
+\begin{itemize}
+%
+%
+\item
+%
+For simple fractions in the
+text the solidus \verb|/|, as in $\hbar=h/2\pi$, should be used
+instead of \verb|\frac| or \verb|\over|, care being taken to use
+parentheses where necessary to avoid ambiguity, for example to
+distinguish between $1/(n-1)$ and $1/n-1$. Exceptions to this are
+the proper fractions $\frac12$, $\frac13$, $\frac34$, etc., which
+are better left in this form. In displayed equations horizontal
+lines are preferable to solidi provided the equation is kept
+within a height of two lines. A two-line solidus should be avoided
+where possible; the construction $(\ldots)^{-1}$ should be used
+instead.
+%
+%
+\item
+%
+Angle brackets (e.g. the ``bra-ket'' notation, average values and
+Green functions) are obtained with \verb|\langle| and \verb|\rangle| commands:
+$\langle p|q \rangle$, $\langle S^z \rangle$ and
+$\langle\langle a^{+}_i | a_j \rangle\rangle_{\omega}$.
+%
+%
+\item
+%
+The symbol \verb|\mid| should be used as binary operator only.
+The character ``~$|$~'' is a proper element of such mathematical constructions
+as modulus, the ``bra-ket'' notation and Green functions:
+$X^{pq}= |p\rangle \langle q|$ and $A=|b/c|$.
+%
+%
+\item
+%
+The root sign $\sqrt[n]{x}$ looks fine with simple expressions only,
+the power $1/n$ should be used for complex ones.
+%
+%
+\item
+%
+Braces, brackets and parentheses should be used in
+the following order: $\{[(\;)]\}$. The same ordering of brackets
+should be used within each size. However, this ordering can be
+ignored if the brackets have a special meaning.
+%
+%
+\item
+%
+Decimal point (not comma!) should be used in decimal fractions.
+%
+%
+\item
+%
+Please treat mathematics as a part of text, writing down punctuation
+marks where necessary.
+\end{itemize}
+
+
+\subsection{Floats: figures and tables}
+
+
+\begin{wrapfigure}{i}{0.5\textwidth}
+\centerline{\includegraphics[width=0.33\textwidth]{eps_demo}}
+\caption{This is a sample of true EPS figure which allows arbitrary
+scaling without the loss of quality. Figure should be centred in the
+line.} \label{fig-smp1}
+\end{wrapfigure}
+%
+Put the tables and figures in the text with the \verb|table| and
+\verb|figure| environments, and position them near the first
+reference of the table or the figure. Each table or figure should
+have an explanatory caption which should be as concise as possible.
+If a table or figure is divided into parts these should be labelled
+(a), (b), (c), etc., but there should be only one caption for the
+whole float, not separate ones for each part. The caption comes
+\emph{before} the table and \emph{after} the figure. It should have
+a full stop at the end. Simple samples are presented here (see
+figures~\ref{fig-smp1} and \ref{fig-smp1_2} and table~\ref{tbl-smp1}).
+
+\begin{figure}
+\centerline{\includegraphics[width=0.65\textwidth]{eps_demo}}
+\caption{This is a sample of true EPS figure which allows arbitrary
+scaling without the loss of quality. Figure should be centred in the
+line.} \label{fig-smp1_2}
+\end{figure}
+
+
+Where possible tables should not be broken over pages. If a table
+has related notes these should appear directly below the table
+rather than at the bottom of the page. Notes can be designated
+with footnote symbols. The \verb|minipage| environment is useful
+in this case.
+
+Figures may be included in an article as Encapsulated PostScript
+(EPS) files by means of the \verb|\includegraphics| command or using the
+\LaTeX{} picture environment. Each figure should have a brief
+caption describing it and, if necessary, interpreting the various
+lines and symbols on the figure. As much lettering as possible
+should be removed from the figure itself and included in the
+caption.
+
+Keep in mind that your tables and figures may move from their
+original places during preparation of the article for publishing. Collecting
+all tables and figures at the end of the article is acceptable but
+undesirable.
+
+\begin{table}[h]
+\caption{Coefficients of symmetrized occupancies of orientational states
+which correspond to irreducible representations of the point symmetry
+group 2/m. Just a sample. Table also should be centred in the line.}
+\label{tbl-smp1}
+\vspace{2ex}
+\begin{center}
+\renewcommand{\arraystretch}{0}
+\begin{tabular}{|c|c||c|c|c|c|c|c|c|c|}
+\hline
+&&(1,1)&(1,2)&(1,3)&(1,4)&(2,1)&(2,2)&(2,3)&(2,4)\strut\\
+\hline
+\rule{0pt}{2pt}&&&&&&&&&\\
+\hline
+\raisebox{-1.7ex}[0pt][0pt]{A$_g$}
+      & $x_+$& 1/2&  1/2&  0&  0&  1/2&  1/2&  0&  0\strut\\
+\cline{2-10}
+      & $z_+$& 0&  0&  1/2&  1/2&  0&  0&  1/2&  1/2\strut\\
+\hline
+\raisebox{-1.7ex}[0pt][0pt]{B$_g$}
+      & $x_-$& 1/2&  1/2&  0&  0& $-1/2$& $-1/2$&  0&  0\strut\\
+\cline{2-10}
+      & $z_-$& 0&  0&  1/2&  1/2&  0&  0& $-1/2$& $-1/2$\strut\\
+\hline
+\raisebox{-1.7ex}[0pt][0pt]{B$_u$}
+      & $y_+$& 1/2& $-1/2$&  0&  0&  1/2& $-1/2$&  0&  0\strut\\
+\cline{2-10}
+      & $u_-$& 0&  0&  1/2& $-1/2$&  0&  0& $-1/2$&  1/2\strut\\
+\hline
+\raisebox{-1.7ex}[0pt][0pt]{A$_u$}
+      & $y_-$& 1/2& $-1/2$&  0&  0& $-1/2$&  1/2&  0&  0\strut\\
+\cline{2-10}
+      & $u_+$& 0&  0&  1/2& $-1/2$&  0&  0&  1/2& $-1/2$\strut\\
+\hline
+\end{tabular}
+\renewcommand{\arraystretch}{1}
+\end{center}
+\end{table}
+
+
+\subsection{How to prepare a good figure}
+
+\emph{Authors should remember that the final printed quality of
+illustrations can never be better than the quality of the original
+artwork.}
+
+Figures must be carefully prepared and submitted ready for
+reproduction.
+Figures are often reduced to half of their original size so
+lettering and symbols should be clear and large
+enough (smallest letters should not be smaller
+than 2~mm, line strength should be greater than 1~pt).
+All figure elements should be of proportional sizes and have uniform strength and contrast.
+Avoid small open symbols, small dots, small decimal
+points, hairlines, close-dotted or short-dashed lines. Draw a
+closed axes frame in diagrams with the axis titles (quantity
+followed by the unit in brackets) parallel to the corresponding
+axis, outside the frame. For numbers, use a decimal point instead
+of a comma.
+Authors should avoid including any unnecessary text
+around a figure, such as captions, figure numbers, author or
+file names. Grey scales in plots and diagrams, which might get
+difficult to distinguish after reducing, or which often disappear
+during the printing process, should be avoided.
+Labelling should be uniform in size throughout all figures.
+Lettering should not be pasted on to the figures as it may easily
+become detached as a result of handling.
+
+\begin{wrapfigure}{i}{0.5\textwidth}
+%\vspace{-2ex}%
+\centerline{\includegraphics{icmphome}}
+\caption{This is a sample of a bitmap image. This
+cosy building homes the Institute for Condensed Matter Physics and
+the CMP Editorial Office too. Photo by Oleh Vorobyov.}
+\label{fig-smp2}
+\end{wrapfigure}
+
+Colour figures submitted in electronic format will generally
+remain in colour in the electronic versions of an article at no
+cost. However, in the paper version of the CMP journal figures are printed in black
+and white or grayscale.
+
+Roughly speaking, there are two types of electronic figures:
+vector graphics and bitmap graphics. A \emph{vector} image is a
+set of arranged objects: lines, polygons, ellipses, shades,
+characters, etc. Such an image allows almost arbitrary scaling
+without loss of quality. Vector images are typically charts,
+plots, diagrams, etc., produced by various computer software. A
+\emph{bitmap} image is a two-dimensional array of pixels
+(PICture'S ELements) or ``dots''. Continuous tone photographs are
+their the most widespread samples (like figure~\ref{fig-smp2}).
+Image quality is determined by DPI (Dot Per Inch --- a pretty
+self-explained definition). Below, there are necessary
+requirements for each type of images.
+\begin{description}
+%
+%
+\item[Vector images]
+%
+are to be prepared in Encapsulated PostScript (EPS) format. The
+Bounding Box should indicate the area of the figure with a minimum
+of white space around it and not the dimensions of the page.
+Please make sure to use only standard fonts
+(Helvetica or Arial, Times or Times New Roman, Symbol)
+or include the fonts in the figure file.
+Authors should avoid using special effects generated by including verbatim
+PostScript code within the \LaTeX{} file with specials other than the
+standard figure inclusion ones.
+Files should be prepared
+in ASCII format (not binary) with no TIFF preview. If Windows
+Postscript drivers are used, check that the Postscript option is
+set to Encapsulated Postscript (EPS).
+%
+%
+\item[Bitmap images]
+%
+should be sent in TIFF (or TIF) format. Continuous-tone figures
+should have at least 300~DPI, line drawings -- 600~DPI minimum
+resolution in final size. Screen or web resolution is
+\emph{absolutely insufficient} for publication. If authors convert
+the bitmap image to EPS format and include it in such a form in
+the compuscript, they should also send an original TIFF version of
+the image to the Editorial Office.
+
+Use of lossy JPEG (JPG) format (or JPEG compression) is \emph{strictly prohibited}
+for images with sharp margins (especially line-art) because of large visible artefacts.
+Continuous-tone images (especially large figures with good resolution) \emph{can} be
+sent in JPEG format with compression set to ``High quality''.
+\end{description}
+
+Every time if you are in doubt, please feel free consult the
+Editorial Office and you will receive an advice of our \TeX{}nical
+Editor.
+
+
+
+
+\subsection{Acknowledgements and appendices}
+
+The acknowledgement section follows the main body of the paper and
+precedes any appendixes. This unnumbered section starts with
+command
+\\
+\strut\hfill%
+\verb|\section*{Acknowledgments}|%
+\hfill\strut%
+\\
+Technical detail that it is necessary to include, but that
+interrupts the flow of the article, may be consigned to an
+appendix. Any appendixes should be included at the end of the main
+text of the paper, after the acknowledgements section (if any) but
+before the reference list. The command \verb|\appendix| is used to
+signify the start of the appendixes.
+
+
+\subsection{References}
+
+References should be numbered sequentially through the text and prepared
+by means of \verb|\cite| and \verb|\bibitem| commands, linking citations in the text
+with their entry in the reference list, which is composed within
+the standard \verb|thebibliography| environment.
+
+When several references occur together in the text \verb|\cite|
+may be used with multiple labels with commas but no spaces
+separating them. Thus
+\\
+\strut\hfill%
+\verb|\cite{Zub74,Bus89,Mel00,Mry94,Sta11,Sta04}|%
+\hfill\strut%
+\\
+would give
+\cite{Zub74,Bus89,Mel00,Mry94,Sta11,Sta04}.
+Note that labels are sorted in an ascending order and the groups of consecutive numbers are condensed.
+
+The citation scheme for journals is: Surnames\verb|~|Initials.,
+Journal Title (according to the standard abbreviations), Year of publication,
+\textbf{Vol.}, starting page (comments: e.g. in Ukrainian, unpublished, private communication).
+For journals without volume numbers place the issue number instead as in reference~\cite{Mry94}.
+If there are more than four authors, the first one should be listed only, followed
+by ``et al.''
+Title of journal should be abbreviated according to the ISI standards (see \href{http://library.caltech.edu/reference/abbreviations/}{http://library.caltech.edu/reference/abbreviations/}). 
+Please supply DOI for e-version of the papers if available \cite{Bus89,Mel00,Sta11}.
+
+For books, the following order is required (skip irrelevant information):
+Book Authors or Editor[s]
+(ed[s].), Book Title. edited by Editors, Book Series Vol. No.,
+Publisher, Place, Year. When citing conference proceedings, please
+add all available data such as title, date, and place of the
+conference as well as publisher, place, and year of publication.
+
+Please add language of publication for materials which are not written in English. Indicate materials accepting for publications by adding ``(in press)''. Please avoid references to unpublished materials, private communication and web pages.
+
+You should make sure the information is correct. Please separate each reference from the others.
+
+Before submitting your article, please ensure you have checked your paper for any relevant references you may have missed.
+
+A typical numerical reference list might be
+\cite{Zub74,Bus89,Mel00,Mry94,Sta11,Sta04,Shv04,Yuk87}.
+
+
+{\small \topsep 0.6ex
+\begin{verbatim}
+\begin{thebibliography}{7}
+\bibitem{Zub74} Zubarev~D.N., Nonequilibrium Statistical Thermodynamics, 
+    Consultants Bureau, New-York, 1974.
+\bibitem{Bus89} Bussmann-Holder~A., Simon~A., B\"uttner~H., 
+    Phys. Rev. B, 1989, \textbf{39}, No.~1, 207; \bibdoi{10.1103/PhysRevB.39.207}.
+\bibitem{Mel00} Melnyk~R., Patsahan~O., 
+    Theor. Math. Phys., 2000, \textbf{124}, No.~2, 1145; \bibdoi{10.1007/BF02551084}
+    [Teor. Mat. Fiz., 2000, \textbf{124}, No.~2, 339 (in Russian)].
+\bibitem{Mry94} Mryglod~I.M., Tokarchuk~M.V., 
+    Condens. Matter Phys., 1993, \textbf{3}, 116.
+\bibitem{Sta11} Stasyuk~I.V., Velychko~O.V., Condens. Matter Phys., 2011, \textbf{14}, 
+    No.~1, 13004; \bibdoi{10.5488/CMP.14.13004}.
+\bibitem{Sta04} Stasyuk~I.V., Mysakovych~T.S., 
+    Preprint of the Institute for Condensed Matter Physics, ICMP--04--12U, 
+    Lviv, 2004, (in Ukrainian).
+\bibitem{Shv04} Shvaika~A.M., Vorobyov~O., Freericks~J.K., Devereaux~T.P., 
+    Preprint arXiv:cond-mat/0408400, 2004.
+\bibitem{Yuk87} Yukhnovkii~I.R., Idzyk~I.M., Kolomiets~V.O., 
+    In: Proc. Contributed papers of Conf. on Modern problems of statistical physics, 
+    Lviv, vol.~2, 1987, 97--102, (in Russian).
+\end{thebibliography}
+\end{verbatim}
+}
+
+
+
+\subsection{Ukrainian part}
+\label{ua-part}
+
+If you are not familiar with Ukrainian language, just uncomment
+two lines before \verb|\ukrainianpart| in the template. The
+necessary translation will be made by the Editorial Office.
+
+
+
+\section{\protect\LaTeX{} and related issues}
+\label{tex-issues}
+
+The great advantage of \LaTeX{} over other text processing systems
+is its ability to handle mathematics to almost any degree of
+complexity. For this reason it prevails in major publishing houses working in the
+fields of physics and mathematics. However, even so brilliant tool becomes
+useless without necessary level of knowledge. A lot of useful (and free) information
+one can find at ``\TeX{} Users Group'' web site
+
+\centerline{\href{http://www.tug.org/}{\texttt{http://www.tug.org/}}}
+
+``The Not So Short Introduction to \LaTeXe{}'' by Tobias Oetiker is an
+absolutely necessary book for beginners:
+\\
+\centerline{\href{http://ctan.org/tex-archive/info/lshort/}{\texttt{http://ctan.org/tex-archive/info/lshort/}}}
+\\
+(available in a variety of languages including Ukrainian). Ukrainian \TeX{}nicians
+will find a plenty of language-specific information at Andrij Shvaika's
+``\TeX{} \& Ukrainian'' Web-page
+\\
+\strut\hfill%
+\href{http://ph.icmp.lviv.ua/~ashv/tex/TeXandUkrainian.win.html}{\texttt{http://ph.icmp.lviv.ua/\~{}ashv/tex/TeXandUkrainian.win.html}}%
+\hfill\strut%
+
+
+Remember, you write \LaTeX{} sources not for computers only,
+but for human beings also! Please make clear and fine codes!
+Your document should compile without errors. Do the best you can!
+However, some underfulls (and few small overfulls) warnings are acceptable,
+since the compuscript will be slightly (?) modified anyway.
+
+Frequently good physicists (especially young scientists) have a
+little knowledge how to write a good looking article. As
+comprehensive (and free) tutorials on the subject one can mention
+``AIP Style Manual''
+\\
+\centerline{\href{http://www.aip.org/pubservs/style.html}{\texttt{http://www.aip.org/pubservs/style.html}}}
+\\
+and ``Reviews of Modern Physics Style Guide''
+\\
+\strut\hfill%
+\href{http://rmp.aps.org/files/rmpguide.pdf}{\texttt{http://rmp.aps.org/files/rmpguide.pdf}}%
+\hfill\strut%
+\\
+Remember: ``\textit{Ignorantia non est argumentum}'' and
+``\textit{Scientia potentia est}''!
+
+
+%% Type in your references using {thebibliography} environment 
+%% or create them from your bibtex database using cmp.bst style.
+
+%\bibliographystyle{cmp}
+%\bibliography{mybibdb}
+
+
+\begin{thebibliography}{7}
+\bibitem{Zub74} Zubarev~D.N., Nonequilibrium Statistical Thermodynamics, 
+    Consultants Bureau, New-York, 1974.
+\bibitem{Bus89} Bussmann-Holder~A., Simon~A., B\"uttner~H., 
+    Phys. Rev. B, 1989, \textbf{39}, No.~1, 207; \bibdoi{10.1103/PhysRevB.39.207}.
+\bibitem{Mel00} Melnyk~R., Patsahan~O., 
+    Theor. Math. Phys., 2000, \textbf{124}, No.~2, 1145; \bibdoi{10.1007/BF02551084}
+    [Teor. Mat. Fiz., 2000, \textbf{124}, No.~2, 339 (in Russian)].
+\bibitem{Mry94} Mryglod~I.M., Tokarchuk~M.V., 
+    Condens. Matter Phys., 1993, \textbf{3}, 116.
+\bibitem{Sta11} Stasyuk~I.V., Velychko~O.V., Condens. Matter Phys., 2011, \textbf{14}, No.~1, 13004; \bibdoi{10.5488/CMP.14.13004}.
+\bibitem{Sta04} Stasyuk~I.V., Mysakovych~T.S., 
+    Preprint of the Institute for Condensed Matter Physics, ICMP--04--12U, 
+    Lviv, 2004, (in Ukrainian).
+\bibitem{Shv04} Shvaika~A.M., Vorobyov~O., Freericks~J.K., Devereaux~T.P., 
+    Preprint arXiv:cond-mat/0408400, 2004.
+\bibitem{Yuk87} Yukhnovkii~I.R., Idzyk~I.M., Kolomiets~V.O., 
+    In: Proc. Contributed papers of Conf. on Modern problems of statistical physics, 
+    Lviv, vol.~2, 1987, 97--102, (in Russian).
+\end{thebibliography}
+
+%
+%% If you have problems with typesetting in ukrainian uncomment lines below.
+%
+%  \lastpage
+%  \end{document}
+
+\ukrainianpart
+
+\title{Повна назва: Зразок статті та поради авторам}
+\author{А.В. Тор\refaddr{label1,label2}, Б.В. Тор\refaddr{label2}}
+\addresses{
+\addr{label1} Університет ім. Орнштейна, Софтленд, 10041 Цельсій, вул. Реін, 1
+\addr{label2} Інститут ім. Церніке, Солідшир, 20451 Фаренгейт, пр. Рівер, 2
+}
+%
+%% якщо автор є один або автори є з однієї установи:
+%
+%  \author{1й Автор, 2й Автор, \ldots}
+%  \address{Інститут\ldots}
+%
+%%
+
+\makeukrtitle
+
+\begin{abstract}
+\tolerance=3000%
+В цих порадах описано як підготувати та надіслати
+статтю для публікації в журналі ``Condensed Matter Physics'' за
+допомогою \LaTeX{} з використанням стилю \texttt{cmpj.sty}.
+Кожен надісланий рукопис повинен містити анотацію, що відображає
+суть дослідження. Анотація публікуватиметься окремо від статті в
+різноманітних бібліографічних виданнях, тому вона мусить бути
+повністю самодостатньою (\emph{без приміток чи нумерованих
+покликів}). Вельми важливі поклики можна помістити в анотацію
+[Thor~A.U. et al., Condens. Matter Phys., 2004, \textbf{7}, 111].
+Анотація повинна складатися лише з одного абзацу розміром до
+150~слів. Присутність математичних виразів не бажана. Слід давати
+означення для всіх нестандартних символів та скорочень.
+%
+\keywords До шести ключових слів
+
+\end{abstract}
+
+\end{document}