doc 4

git-svn-id: svn://tug.org/texlive/trunk@80 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 719 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/apa/README b/Master/texmf-dist/doc/latex/apa/README
new file mode 100644
index 00000000000..e629e11b5bd
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/apa/README
@@ -0,0 +1,24 @@
+
+apa.cls is a LaTeX2e class file that makes your document conform to
+the APA Publication Manual (Fifth Edition, 2001) specifications for
+manuscripts or to the APA journal look found in journals like the
+Journal of Experimental Psychology etc. In addition, it provides a
+regular LaTeX-like output with a few enhancements and APA-motivated
+changes.
+
+This is a document *class* which uses (and modifies) some packages to
+achieve strictly defined formatting results and also uses the apacite
+package (sty & bst) for citations and references.  If you only want 
+APA-like citation for other kinds of documents (e.g., a thesis) use 
+apacite.sty with an appropriate class.
+
+In order to use this document class you need some packages that may
+not be present in your LaTeX distribution.  Please read apacls.txt
+carefully to understand what you need to install and what is possible
+with apa.cls, then read examples.txt carefully to understand how to
+use apa.cls (macros and instructions).  
+
+Athanassios Protopapas
+protopap@ilsp.gr
+August 2002
+
diff --git a/Master/texmf-dist/doc/latex/apa/apacls.txt b/Master/texmf-dist/doc/latex/apa/apacls.txt
new file mode 100644
index 00000000000..c05f8ae7b00
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/apa/apacls.txt
@@ -0,0 +1,284 @@
+This is file apacls.txt, which contains instructions for using the
+APA LaTeX2e class file apa.cls 
+
+ Athanassios Protopapas  *******  Version 1.3.0 August 2002
+
+
+Introduction
+
+ apa.cls is a LaTeX2e class file that makes your document conform to
+ the APA Publication Manual (Fifth Edition, 2002) specifications for
+ manuscripts or to the APA journal look found in journals like the
+ Journal of Experimental Psychology etc. In addition, it provides a
+ regular LaTeX-like output with a few enhancements and APA-motivated
+ changes.  The headings and enumeration/seriation code is taken from
+ theapa.sty by Young U. Ryu.
+
+
+Description
+
+ a) Manuscript mode (man)
+
+ apa.cls typesets a title page, abstract page, text body, then
+ references, author notes, footnotes, tables, figure captions, and
+ figures. All text is double spaced. The title page contains
+ (centered) the title, author name, affiliation, short title, and the
+ running head (automatically capitalized).  A note is inserted in
+ place of each table and figure in the text.
+
+ The title is printed as a heading at the beginning of the text (don't
+ include an extra \section, because the introduction is not supposed
+ to be titled in printed articles). \leftheader is ignored in
+ manuscript mode. The contents of \note are printed under the author
+ names and affiliations, typically the date of submission. The "Author
+ Notes" page contains the contents of \acknowledgements.  A footnote
+ page is only produced if there is at least one footnote in the text.
+
+ b) Journal mode (jou)
+
+ apa.cls typesets the text in double-sided, double column format, with
+ an appropriately centered title, author names, affiliations, note,
+ and abstract.  The contents of acknowledgements are printed as
+ footnotes in a box at the lower left corner of the first page.
+ Journal-like headers can also be produced on the first page.
+ Dimensions and overall "look" are modeled after JEP:HPP.  The purpose
+ of this mode is to produce readable and reasonably condensed output
+ for double-sided xeroxing and distribution.
+
+ c) Document mode (doc)
+
+ apa.cls typesets the text in single-sided, single-column format, with
+ an appropriately centered title, author names, affiliations, note,
+ and abstract on the first page. The contents of acknowledgements are
+ printed at the bottom of the first page. Section headings and
+ enumeration follow the APA guidelines and floats (figures and tables)
+ are inserted in the text where they are defined, as in regular LaTeX
+ articles.
+
+ The purpose of this format is to provide hardcopies during the
+ development of articles that are later going to be submitted (using
+ the manuscript format) and distrubuted (using the journal
+ format). The advantage over using a regular article class is that all
+ the extra definitions are supported and no changes need thus be made
+ to the text other than the format parameter.
+
+
+Known bugs and restrictions:
+
+ - Up to four affiliations (for article author(s)) are supported.
+ - There seems to be an incompatibility between apacite and babel.
+    Since apacite is necessary, you may not be able to use babel.
+ - No provision for A4 paper.  See examples for a workaround.
+
+
+Other necessary files:
+
+ For all modes you need apacite.sty and apacite.bst.
+
+ For manuscript mode, you need endnotes.sty and endfloat.sty 
+
+ For journal mode, you need, optionally, pslatex.sty (or times.sty and
+  mathptm.sty), ftnright.sty, fancyhdr.sty (for first page headers),
+  and flushend.sty
+
+
+To use this class, include one of the following
+
+ \documentclass[jou]{apa}  for the two-column output (Times-Roman default)
+ \documentclass[man}{apa}  for the manuscript (double-spaced) output
+ \documentclass[doc]{apa}  for regular document (in computer modern)
+   
+ at the beginning of your file (instead of {article}), then define the
+ title, author, etc. (see below), and start with
+
+ \maketitle
+
+ right after \begin{document}, immediately followed by the first
+ paragraph of you text (no blank line). Do not use a
+ \bibliographystyle command, because apacite is selected automatically
+ (for backwards compatibility, any existing \bibliographystyle command
+ is ignored and a warning is issued).
+
+ The journal format uses Times Roman by default (it does look like
+ published after all); if you don't have pslatex.sty or times.sty, or
+ if you just prefer computer modern, add notimes after the jou option
+ in the class line: \documentclass[jou,notimes]{apa} (notimes has no
+ effect in modes other than jou and may be left in when switching)
+
+ Manuscript format uses Computer Modern by default but can use
+ Helvetica or typewriter look by using the options helv or tt,
+ respectively. I find the result with either of these much more
+ "manuscript"-like but that's a matter of taste.  These options have
+ no effect in modes other than man and may be left in when switching.
+
+
+The following commands are defined and should/may be used:
+
+ 1. Required for document compilation
+
+ \title{Title}                          
+ \author{Author Name(s)}                
+   or \twoauthors{First Author(s)}{Second Author(s)}
+   or \threeauthors{John and Jim}{Mary and Sue}{Nick}
+   or \fourauthors{Helen}{Dick}{Tracy and Larry}{James Bond}
+ \affiliation{Department\\ University}  
+   or \twoaffiliations{Affiliation of 1st Author(s)}{Affil. of 2nd Author(s)}
+   or \threeaffiliations{U of A}{U of B}{U of C}
+   or \fouraffiliations{My Company}{Your Department}{Heaven}{Earth}
+
+ \maketitle                                    % right after \begin{document}
+
+ 2. Strongly recommended (required by APA)
+
+ \abstract{Abstract}                    
+ \acknowledgements{Author notes etc.}   
+ \rightheader{Running head}                    % defaults to title
+ \shorttitle{Short title}                      % defaults to title
+ \leftheader{Authors}                          % defaults to author 
+
+ 3. Optional, possibly helpful 
+
+ \note{Draft/submission date, etc.}	       % To add notes on first page
+ \thickline                                    % Use in tables for the top line
+ \centeredcaption{width}{caption-text}         % Used with double-column figures 
+                                               %  to create centered captions
+                                               %  narrower than \textwidth
+
+ \fitfigure[optional-height]{eps-filename}     % Automatically fit a postscript 
+                                               %  figure; load graphicx and use
+                                               %  instead of \includegraphics
+ \fitbitmap[optional-height]{eps-filename}     % Same as \fitfigure but won't scale
+                                               %  figure in man mode for best 
+                                               %  reproduction of bitmap figures
+
+ \ifapamode{man-code}{jou-code}{doc-code}      % Do different things depending on
+ \ifapamodeman{man-mode-code}{doc-or-jou-code} %  mode---you shouldn't have to use
+ \ifapamodejou{jou-mode-code}{doc-or-man-code} %  any of these but they're here if
+ \ifapamodedoc{doc-mode-code}{man-or-jou-code} %  you want them.  Parameters can
+                                               %  be left empty to do nothing
+
+ \journal{Journal name or other note}          % Top left header on page one in
+                                               %  jou/doc mode, ignored in man mode
+ \volume{Volume, number, pages}                % Top left, under content of \journal
+ \ccoppy{Copyright notice etc.}                % Top right header in jou/doc p. 1
+ \copnum{Your hovercraft is full of eels}      % Top right, under content of \ccoppy
+
+ \tabfnm{a}				       % Put a note mark inside a table cell
+ \tabfnt{a}{Note text}			       % Put the mark and text for a table note
+ \apavector{A}				       % Format a symbol as vector by APA rules
+ \appendix				       % Standard LaTeX usage, starts off
+					       %  appendix section(s)
+
+
+The following options are available:
+
+ These options must be combined with one of jou, man, doc.
+
+ notimes  : Effective in jou mode, cancels loading pslatex (or times) and 
+             uses computer modern fonts.
+ nosf     : Effective in man mode, neutralizes the \helvetica command.
+ fignum   : Effective in man mode, adds figure numbering to the figure pages.
+             Makes it easier to refer to figures and I recommend it for the
+             reviewers' copies, but for the original figures you need to have
+             them printed without this and write the number with pencil on the back.
+ notab    : Effective in jou mode, cancels the automatic stretching of tabular
+             environments to the width of their enclosing float.
+ nobf     : Effective in man mode, turns off boldface in section headers
+ helv	  : Effective in man mode, uses Helvetica as the base typeface
+ tt	  : Effective in man mode, uses a typewriter base typeface
+ longtable: Only usable in man mode, loads longtable.sty if you *really* must
+             use long tables in your manuscript.  See special note below
+ floatmark: Effective in man mode, inserts placeholders for floats in text
+             ("Insert Figure X about here" -- no longer required by APA)
+
+Notes on usage:
+
+ If there is more than one author but all in the same department, use
+ the \author command with all names and the \affiliation command. If
+ there are people from two different departments, use the \twoauthors
+ and \twoaffiliations commands to group them appropriately.  For three
+ affiliations use \threeauthors and \threeaffiliations, and guess what
+ for four.
+
+ Default sectioning maps \section, \subsection, and \subsubsection to
+ the three-level heading definitions of the APA manual.  If you need
+ more/fewer heading levels, you can use the command
+ \headinglevels{four} (or any number between one and five---spelled
+ out---instead of four) and then use \paragraph and \subparagraph for
+ the lower-level sectioning. Don't bother to \label your sections
+ because they can't be \ref'd since they are not numbered in APA style.
+
+ When a figure is too wide for a single column, use a double-column
+ figure (\begin and \end {figure*} instead of {figure}). When using
+ double column figures, it looks better if you use \centeredcaption
+ instead of caption, with the first parameter about equal to the width
+ of the float (table or figure). This makes no difference in
+ manuscript mode.
+
+ It is still *your* responsibility to format the tables in accordance
+ with the APA guidelines (e.g., no vertical lines, and so on) and
+ precede the actual table body with its caption (i.e., use \caption
+ *before* \begin{tabular} in tables, or the results won't be
+ conforming to the APA requirements for tables). Because a paragraph
+ break is inserted in manuscript mode (along with the "insert
+ table/figure" note), don't define tables in the middle of a
+ paragraph.
+
+ Remember to use \label for floats *after* the caption (and not inside it!)
+
+ For instructions on using the various citation forms get apacite.tex,
+ testAPA.tex, and readme.apa from the CTAN mirror near you.  For
+ instruction on using APA enumeration and seriation read apaenum.txt
+ in this distribution.
+
+ If you need to use additional options for article.cls, use them with
+ the apa.cls options and they will be automatically passed along to
+ article.cls
+
+ Notes in tables: There is a semi-automatic way to include notes in
+ tables such as, for example, to indicate levels of significance.  The
+ command \tabfnm{X} inside a table cell (tabular environment) produces
+ the note mark.  Use \tabfnt{X}{Note text} immediately before or after
+ \end{tabular} inside the table environment to produce the note text.
+ See example file.
+
+ Appendices: Use the command \appendix only once, at the point where
+ your (first) appendix starts.  Then use \section{Appendix Title} to
+ start each appendix section (even if there is only one).  You may use
+ cross-references to appendixes, because they are numbered, if there
+ are more than one.  The command \label{app:xxx} after the appendix
+ \section sets the label.  Refer to it with "Appendix~\ref{app:xxx}"
+ anywhere in the article.
+
+ If you use vectors, the command \apavector{X} will make your life easier.
+
+ Long tables: By popular demand, longtable now (sort of) works with
+ apa.cls.  You must *not* load the longtable package yourself;
+ instead, pass the longtable option to apa.cls (due to precedence
+ requirements for proper endfloat function and cross-definitions).
+ Since longtable only works in single-column documents it can only be
+ used with man mode.  Unfortunately the ifapamode commands won't work
+ to keep a single table body and apply a mode-specific (table or
+ longtable) environment because of illegal cross-nesting with
+ environment begin/end.  In fact the table environment won't even work
+ inside in ifapamode argument, which makes it impossible to have a
+ single file that can be processed for both man and jou.  This defeats
+ the purpose of apa.cls, so only resort to longtable if you absolutely
+ have to.  You will need the supplied endfloat.cfg to use it.
+
+
+Feedback:
+
+ Send me comments or bug reports (preferably with fixes) at:
+ protopap@ilsp.gr
+
+
+Example of usage:
+
+ See file examples.txt... 
+ PLEASE, read file examples.txt, it will probably solve your problems.
+
+
+Thanassi Protopapas
+August 30, 2002
+
diff --git a/Master/texmf-dist/doc/latex/apa/apaenum.txt b/Master/texmf-dist/doc/latex/apa/apaenum.txt
new file mode 100644
index 00000000000..d6a46107577
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/apa/apaenum.txt
@@ -0,0 +1,60 @@
+
+This file contains instructions on using APA seriation and enumeration.
+
+%$$$ theapa.sty $$$  --- Version 2.5 .1(May 1992)
+%    by Young U. Ryu (young@emx.utexas.edu)
+
+% [6] APA Seriations
+%
+%  A. seriate environment:
+%     For example, the following:
+%
+%        Blah blah blah
+%        \begin{seriate}
+%        \item first item,
+%        \item second item.
+%        \end{seriate}
+%        Blah blah blah
+%
+%      results in:
+%
+%        Blah blah blah (a) first item, (b) second item.  Blah blah blah
+%
+%  B. APAenumerate environment
+%     For example, the following:
+%
+%        Blah blah blah
+%        \begin{APAenumerate}
+%        \item first item ... ... ... continue continue
+%        \item second item ... ... ... continue continue
+%        \end{APAenumerate}
+%        Blah blah blah
+%
+%      results in:
+%
+%        Blah blah blah
+%            1. first item ... ... ...
+%        continue continue
+%            2. second item ... ... ...
+%        continue continue
+%        Blah blah blah
+%
+%  C. APAitemize environment
+%     For example, the following:
+%
+%        Blah blah blah
+%        \begin{APAitemize}
+%        \item first item ... ... ... continue continue
+%        \item second item ... ... ... continue continue
+%        \end{APAitemize}
+%        Blah blah blah
+%
+%      results in:
+%
+%        Blah blah blah
+%            o  first item ... ... ...
+%        continue continue
+%            o  second item ... ... ...
+%        continue continue
+%        Blah blah blah
+%
diff --git a/Master/texmf-dist/doc/latex/apa/examples.txt b/Master/texmf-dist/doc/latex/apa/examples.txt
new file mode 100644
index 00000000000..d8600da334a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/apa/examples.txt
@@ -0,0 +1,351 @@
+%
+% Athanassios Protopapas, August 2002
+% Examples for using apa.cls v1.3.0
+%
+% This file contains examples of using the commands defined in apa.cls
+% It is not recommended that you use this as a sample document because
+% of its very short length, which makes for very awkward formatting.
+% In fact this file will not compile because of the commands that
+% are embedded in the text (unescaped backslashes all over the place)
+% Just use the examples of the commands you need.
+%
+% The class command goes at the top
+%
+\documentclass[fignum,jou]{apa}
+%
+% Change jou to man/doc for the other modes:
+%
+%\documentclass[fignum,man]{apa}
+%\documentclass[fignum,doc]{apa}
+%
+% Here's what I use:
+%\documentclass[nobf,fignum,tt,man]{apa}
+%
+% If you have postscript graphics to include, load the graphicx package
+%
+\usepackage{graphicx}
+%
+% Define the various headings, names, and other required stuff
+%
+\title{Sample Title}
+\twoauthors{Myself Author}{Second Author and Some Friend}
+\twoaffiliations{My Department\\ Address ZIP}{The other place\\ Elsewhere}
+\abstract{Text of the abstract}
+\acknowledgements{Thanks to people and grants, and your new address maybe.}
+\shorttitle{Short Title as per APA manual}
+\rightheader{Odd-Numbered Page Header}
+\leftheader{Even-Numbered Page Header}
+%
+% Optionally, for keeping track of stuff:
+%\note{Draft of \today}
+%
+% John Vokey uses something like this
+\ifapamodeman{%
+\note{\begin{flushleft}
+    Dr.\ Your Whole Name\\
+    Department of Psychology\\
+    At Some University\\
+	Some City, Some Province or State\\
+	Country  Postal Code\\
+	e-mail: name@someu.ca\\
+   fax: (area)exchange-number
+   \end{flushleft}}}
+{% else, i.e., in jou and doc mode 
+\note{Draft of \today}}
+%
+% If you use A4 paper and care to make a point of it in man mode, 
+% use this, courtesy of John Vokey:
+%\ifapamodeman{\setlength{\textwidth}{5.76772in}%
+%              \setlength{\textheight}{9.19291in}}{}
+%
+% Optional journal-like looking headers 
+%
+\journal{Journal of nothing}\volume{First and Last Volume}
+\ccoppy{Copyright 2002 by Myself}\copnum{Some serial number}
+%
+% End of definitions, begin document with title and then main text
+%
+\begin{document}
+\maketitle                            %% First thing after \begin{document}
+Here goes the text of the article.    %% Start immediately after \maketitle
+                                      %%  no blank line between title & text 
+
+You can have some text appear differently in each mode, or only appear
+in some mode(s).  You can also modify the appearance of tables,
+figures, or equations between modes of compilation.  Here's an
+unexciting example:
+
+\ifapamodeman{This is printed in man mode only}{This is not man mode}.
+You can also use the three-way switch: the current mode is
+\ifapamode{man}{jou}{doc}.
+
+Sectioning commands are used as in regular \LaTeX.  It is very
+important that you use these sectioning commands.  Here's a typical
+example for an experimental psychology paper, following the (untitled)
+introductory section:
+
+\section{Experiment 1} 
+Introduction to this experiment.  When referring to it, type
+Experiment~1 (with capital E and a tie to the number so they won't
+separate).  However, when mentioning the first experiment the ``e'' is
+lowercase.
+\subsection{Method}
+You may need some general remarks on method here.  Then use the standard parts.
+\subsubsection{Subjects}
+Description of subjects.
+\subsubsection{Apparatus}
+Sometimes it is necessary to give the apparatus a special section.
+\subsubsection{Stimuli}
+What the subjects saw, heard, or felt.
+\subsubsection{Procedure}
+What happened to the poor subjects.
+\subsection{Results}
+Now the numbers: What your measurements showed and all the statistics of it.
+\subsection{Discussion}
+If your results mean anything, this is the place to talk about it.  In case 
+there is little to discuss before the final section (e.g., \section{General 
+Discussion} at the end) you may combine results and discussion in a single
+\subsection{Results and Discussion} before you go on to the next
+\section{Experiment 2}
+and so on.
+
+In case you have more than these three levels of headings
+(sectioning), you can use the command \headinglevels (e.g.,
+\headinglevels{four} for four levels).  See the APA manual for how to
+handle more or fewer heading levels (the appearance is, naturally,
+taken care of by apa.cls and you only need concern yourself with the
+conceptual divisions).  In case of more than three levels you'll need
+the \paragraph (for the fourth level) and \subparagraph (for the fifth
+level) sectioning commands of \LaTeX.
+
+\section{Floating things}
+\subsection{Figures}
+A figure can be included in any way you like, but this class provides
+a way to deal automatically with fitting encapsulated postscript (EPS)
+files without worrying about dimensions or mode.  Start your figure or
+figure* environment as usual (see the LaTeX book) and then instead of
+\epsfig or \includegraphics use the new command \fitfigure:
+
+An example of a figure that loads a postscript file.  You can use the
+t and b options for selectively putting a figure at the top or bottom
+of a page.  Always include p after t or b so that you won't risk
+running out of space if a figure is too big.  The h option for
+inserted figures is not recommended because it's not used in APA
+journals.  Don't forget \usepackage{graphicx} in your preamble! 
+--- not epsfig, not graphics.
+
+\begin{figure}[tp]
+\fitfigure{fig1} %% You could use {fig1.eps} here but see note below
+\caption{This is the caption of the figure.}
+\label{fig:fig1}
+\end{figure}
+
+There is absolutely no reason to complicate your figures any further
+than this simple example.  Just insert your nice and descriptive
+caption text and the filename.  If you omit the .eps extension for the
+filename (as in the example), then if you happen to use pdflatex it
+will automatically load the corresponding .pdf graphic file (assuming
+you have made one with eps2pdf), while "regular" dvips will load the
+.eps file.
+
+At any point in the text, before or after the figure, you can
+automatically refer to it with the \ref command, for example we can
+refer to the above figure as Figure~\ref{fig:fig1}, where the tilde
+keeps the word ``Figure'' (which is capitalized according to APA
+instructions) together with the reference number.  Use names that are
+easy to remember instead of ``fig1'' !
+
+Always put the \label command after (and outside) \caption, otherwise
+you'll run into trouble with the man mode not finding any labels to
+refer to.
+
+\subsubsection{Bitmaps}
+In case of a bitmap eps (as opposed to a graph or line drawing), you
+probably don't want it scaled in man mode, for best reproduction, so
+use \fitbitmap instead:
+
+\begin{figure}[tp]
+\fitbitmap{bm1.eps} %% .eps not necessary -- see note above
+\caption{This is the caption of the figure.}
+\label{fig:fig2}
+\end{figure}
+
+\subsection{Tables}
+What about a table?  Well, mostly no change from what you are used
+to, except that you can use \thickline for the top separator
+to match the APA-journal look.  Here's an example:
+
+\begin{table}[tbp]
+\caption{Some numbers that could be experimental data.}
+\label{tab:tab1}
+\begin{tabular}{lcc}\thickline
+          & \multicolumn{2}{c}{Factor 2} \\ \cline{2-3}
+Factor 1  & Condition~A  & Condition~B   \\ \hline
+First     & 586 (231)    & 649 (255)     \\
+          &    2.2       &    7.5\tabfnm{a}\\
+Second    & 590 (195)    & 623 (231)     \\
+          &    2.8       &    2.5\tabfnm{b}\\ \hline
+\end{tabular}
+\tabfnt{a}{Notes to table material are easy.}
+\tabfnt{b}{Use as many as you like, just remember to number them.}
+\end{table}
+
+In case your data won't fit in a single column (in jou mode) use a
+wide table (environment table* instead of table).  Here's an example:
+
+\begin{table*}[tbp]
+\caption{Some more numbers that could be experimental data and are
+the same as the previous ones, only more of them.}
+\label{tab:tab2}
+\begin{tabular}{lccccc}\thickline
+          & \multicolumn{5}{c}{Factor 2} \\ \cline{2-6}
+Factor 1  & Condition~A & Condition~B & Condition~C & Condition~D & Condition~E \\ \hline
+First     & 586 (231) & 649 (255) & 586 (231) & 649 (255) & 586 (231) \\
+          &    2.2    &    7.5    &    2.2    &    7.5    &    2.2    \\
+Second    & 590 (195) & 623 (231) & 590 (195) & 623 (231) & 590 (195) \\
+          &    2.8    &    2.5    &    2.8    &    2.5    &    2.8    \\ \hline
+\end{tabular}
+\end{table*}
+
+You can get as fancy as you want with tables, just remember not to use
+any vertical lines, and to group columns with \cline when they are
+described by a common header (using \multicolumn).  There's rarely a
+need to get more complicated than these examples.  Avoid nesting
+tabular environments, it's a mess and you'll have to use the notab
+option to make it work (so that internal tabulars don't stretch to the
+line width).  Be creative with \multicolumn instead.
+
+Use figure* instead of figure for figures that are too wide to
+fit comfortably in a single column. 
+
+\section{Section Header}
+More text can go here.\footnote{And this is a footnote, used in just
+the regular LaTeX way}
+
+Suppose this is the end of our document, and there are appendices.
+Remember, appendices come *after* the bibliography.  But there's no
+text between the bibliography and the appendix part.  Don't use
+a \bibliographystyle because apa.cls automatically loads apacite.
+
+\bibliography{mybibfile}
+
+% Now the appendices. First we have to signal the pass into the
+% appendix part. Then you'll have to give each appendix a title
+% thinking of it as a section.
+
+\appendix  %% Just like that, in LaTeX spirit.  No parameters or titles. 
+
+\section{Title of first Appendix} 
+This is the text of the first appendix.  You can present your
+mathematical derivations, raw materials, or whatever.  You are free to
+use figures and tables in the usual way.  apa.cls will number them
+correctly and include them in the table and figure lists where they
+belong.  Isn't apa.cls wonderful?
+
+\section{List of stimuli}
+Just to show that another appendix is really just another section.
+Also, it's a good opportunity to show how longtable should be used.
+Remember, you must include the longtable option with the apa class if
+you need to use longtable.  Also, remember, it only works in man mode.
+
+\begin{longtable}{lcc}
+\caption{One sample caption for the sample long table.}
+\label{tab:ltab}
+\\ \thickline
+          & \multicolumn{2}{c}{Type} \\ \cline{2-3}
+Condition & Cond-A   & Cond-B    \\  \hline
+\endfirsthead
+\\ \thickline
+          & \multicolumn{2}{c}{Type} \\ \cline{2-3}
+Condition & Cond-A   & Cond-B    \\  \hline
+\endhead
+\endfoot
+\thickline
+\endlastfoot
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+Cond-A    & Stim-1 & Stim-2 \\
+          & 1.0 & 2.0  \\
+Cond-B    & Stim-3 & Stim-4  \\
+          & 3.0 & 4.0 \\  \hline
+\end{longtable}
+
+\end{document}