summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2006-01-09 00:44:40 +0000
committerKarl Berry <karl@freefriends.org>2006-01-09 00:44:40 +0000
commitb4fc5f639874db951177ec539299d20908adb654 (patch)
tree52f08823ca58fffe3db6a9b075635038c567626c /Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex
parentdec3d98ebe442d7ea93efbaa8dd2e2be8149a467 (diff)
doc 4
git-svn-id: svn://tug.org/texlive/trunk@80 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex')
-rw-r--r--Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex462
1 files changed, 462 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex b/Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex
new file mode 100644
index 00000000000..d94b8f0c988
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/IEEEtran/bare_conf.tex
@@ -0,0 +1,462 @@
+
+%% bare_conf.tex
+%% V1.2
+%% 2002/11/18
+%% by Michael Shell
+%% mshell@ece.gatech.edu
+%%
+%% NOTE: This text file uses UNIX line feed conventions. When (human)
+%% reading this file on other platforms, you may have to use a text
+%% editor that can handle lines terminated by the UNIX line feed
+%% character (0x0A).
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.6b or later) with an IEEE conference paper.
+%%
+%% Support sites:
+%% http://www.ieee.org
+%% and/or
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/
+%%
+%% This code is offered as-is - no warranty - user assumes all risk.
+%% Free to use, distribute and modify.
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% Testflow can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/testflow
+
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print. Authors are encouraged to use U.S. letter paper when
+% submitting to IEEE. Use the testflow package mentioned above to verify
+% correct handling of both paper sizes by the author's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+% This paper can be formatted using the peerreviewca
+% (instead of conference) mode.
+\documentclass[conference]{IEEEtran}
+% If the IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it:
+% \documentclass[conference]{../sty/IEEEtran}
+
+
+% some very useful LaTeX packages include:
+
+%\usepackage{cite} % Written by Donald Arseneau
+ % V1.6 and later of IEEEtran pre-defines the format
+ % of the cite.sty package \cite{} output to follow
+ % that of IEEE. Loading the cite package will
+ % result in citation numbers being automatically
+ % sorted and properly "ranged". i.e.,
+ % [1], [9], [2], [7], [5], [6]
+ % (without using cite.sty)
+ % will become:
+ % [1], [2], [5]--[7], [9] (using cite.sty)
+ % cite.sty's \cite will automatically add leading
+ % space, if needed. Use cite.sty's noadjust option
+ % (cite.sty V3.8 and later) if you want to turn this
+ % off. cite.sty is already installed on most LaTeX
+ % systems. The latest version can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/cite/
+
+%\usepackage{graphicx} % Written by David Carlisle and Sebastian Rahtz
+ % Required if you want graphics, photos, etc.
+ % graphicx.sty is already installed on most LaTeX
+ % systems. The latest version and documentation can
+ % be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+ % Another good source of documentation is "Using
+ % Imported Graphics in LaTeX2e" by Keith Reckdahl
+ % which can be found as esplatex.ps and epslatex.pdf
+ % at: http://www.ctan.org/tex-archive/info/
+% NOTE: for dual use with latex and pdflatex, instead load graphicx like:
+%\ifx\pdfoutput\undefined
+%\usepackage{graphicx}
+%\else
+%\usepackage[pdftex]{graphicx}
+%\fi
+
+% However, be warned that pdflatex will require graphics to be in PDF
+% (not EPS) format and will preclude the use of PostScript based LaTeX
+% packages such as psfrag.sty and pstricks.sty. IEEE conferences typically
+% allow PDF graphics (and hence pdfLaTeX). However, IEEE journals do not
+% (yet) allow image formats other than EPS or TIFF. Therefore, authors of
+% journal papers should use traditional LaTeX with EPS graphics.
+%
+% The path(s) to the graphics files can also be declared: e.g.,
+% \graphicspath{{../eps/}{../ps/}}
+% if the graphics files are not located in the same directory as the
+% .tex file. This can be done in each branch of the conditional above
+% (after graphicx is loaded) to handle the EPS and PDF cases separately.
+% In this way, full path information will not have to be specified in
+% each \includegraphics command.
+%
+% Note that, when switching from latex to pdflatex and vice-versa, the new
+% compiler will have to be run twice to clear some warnings.
+
+
+%\usepackage{psfrag} % Written by Craig Barratt, Michael C. Grant,
+ % and David Carlisle
+ % This package allows you to substitute LaTeX
+ % commands for text in imported EPS graphic files.
+ % In this way, LaTeX symbols can be placed into
+ % graphics that have been generated by other
+ % applications. You must use latex->dvips->ps2pdf
+ % workflow (not direct pdf output from pdflatex) if
+ % you wish to use this capability because it works
+ % via some PostScript tricks. Alternatively, the
+ % graphics could be processed as separate files via
+ % psfrag and dvips, then converted to PDF for
+ % inclusion in the main file which uses pdflatex.
+ % Docs are in "The PSfrag System" by Michael C. Grant
+ % and David Carlisle. There is also some information
+ % about using psfrag in "Using Imported Graphics in
+ % LaTeX2e" by Keith Reckdahl which documents the
+ % graphicx package (see above). The psfrag package
+ % and documentation can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/psfrag/
+
+%\usepackage{subfigure} % Written by Steven Douglas Cochran
+ % This package makes it easy to put subfigures
+ % in your figures. i.e., "figure 1a and 1b"
+ % Docs are in "Using Imported Graphics in LaTeX2e"
+ % by Keith Reckdahl which also documents the graphicx
+ % package (see above). subfigure.sty is already
+ % installed on most LaTeX systems. The latest version
+ % and documentation can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/subfigure/
+
+%\usepackage{url} % Written by Donald Arseneau
+ % Provides better support for handling and breaking
+ % URLs. url.sty is already installed on most LaTeX
+ % systems. The latest version can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/contrib/other/misc/
+ % Read the url.sty source comments for usage information.
+
+%\usepackage{stfloats} % Written by Sigitas Tolusis
+ % Gives LaTeX2e the ability to do double column
+ % floats at the bottom of the page as well as the top.
+ % (e.g., "\begin{figure*}[!b]" is not normally
+ % possible in LaTeX2e). This is an invasive package
+ % which rewrites many portions of the LaTeX2e output
+ % routines. It may not work with other packages that
+ % modify the LaTeX2e output routine and/or with other
+ % versions of LaTeX. The latest version and
+ % documentation can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/contrib/supported/sttools/
+ % Documentation is contained in the stfloats.sty
+ % comments as well as in the presfull.pdf file.
+ % Do not use the stfloats baselinefloat ability as
+ % IEEE does not allow \baselineskip to stretch.
+ % Authors submitting work to the IEEE should note
+ % that IEEE rarely uses double column equations and
+ % that authors should try to avoid such use.
+ % Do not be tempted to use the cuted.sty or
+ % midfloat.sty package (by the same author) as IEEE
+ % does not format its papers in such ways.
+
+%\usepackage{amsmath} % From the American Mathematical Society
+ % A popular package that provides many helpful commands
+ % for dealing with mathematics. Note that the AMSmath
+ % package sets \interdisplaylinepenalty to 10000 thus
+ % preventing page breaks from occurring within multiline
+ % equations. Use:
+%\interdisplaylinepenalty=2500
+ % after loading amsmath to restore such page breaks
+ % as IEEEtran.cls normally does. amsmath.sty is already
+ % installed on most LaTeX systems. The latest version
+ % and documentation can be obtained at:
+ % http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+% Other popular packages for formatting tables and equations include:
+
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty which improves the
+% LaTeX2e array and tabular environments to provide better appearances and
+% additional user controls. array.sty is already installed on most systems.
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+% Mark Wooding's extremely powerful MDW tools, especially mdwmath.sty and
+% mdwtab.sty which are used to format equations and tables, respectively.
+% The MDWtools set is already installed on most LaTeX systems. The lastest
+% version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/mdwtools/
+
+
+% V1.6 of IEEEtran contains the IEEEeqnarray family of commands that can
+% be used to generate multiline equations as well as matrices, tables, etc.
+
+
+% Also of notable interest:
+
+% Scott Pakin's eqparbox package for creating (automatically sized) equal
+% width boxes. Available:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/eqparbox/
+
+
+
+% Notes on hyperref:
+% IEEEtran.cls attempts to be compliant with the hyperref package, written
+% by Heiko Oberdiek and Sebastian Rahtz, which provides hyperlinks within
+% a document as well as an index for PDF files (produced via pdflatex).
+% However, it is a tad difficult to properly interface LaTeX classes and
+% packages with this (necessarily) complex and invasive package. It is
+% recommended that hyperref not be used for work that is to be submitted
+% to the IEEE. Users who wish to use hyperref *must* ensure that their
+% hyperref version is 6.72u or later *and* IEEEtran.cls is version 1.6b
+% or later. The latest version of hyperref can be obtained at:
+%
+% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/hyperref/
+%
+% Also, be aware that cite.sty (as of version 3.9, 11/2001) and hyperref.sty
+% (as of version 6.72t, 2002/07/25) do not work optimally together.
+% To mediate the differences between these two packages, IEEEtran.cls, as
+% of v1.6b, predefines a command that fools hyperref into thinking that
+% the natbib package is being used - causing it not to modify the existing
+% citation commands, and allowing cite.sty to operate as normal. However,
+% as a result, citation numbers will not be hyperlinked. Another side effect
+% of this approach is that the natbib.sty package will not properly load
+% under IEEEtran.cls. However, current versions of natbib are not capable
+% of compressing and sorting citation numbers in IEEE's style - so this
+% should not be an issue. If, for some strange reason, the user wants to
+% load natbib.sty under IEEEtran.cls, the following code must be placed
+% before natbib.sty can be loaded:
+%
+% \makeatletter
+% \let\NAT@parse\undefined
+% \makeatother
+%
+% Hyperref should be loaded differently depending on whether pdflatex
+% or traditional latex is being used:
+%
+%\ifx\pdfoutput\undefined
+%\usepackage[hypertex]{hyperref}
+%\else
+%\usepackage[pdftex,hypertexnames=false]{hyperref}
+%\fi
+%
+% Pdflatex produces superior hyperref results and is the recommended
+% compiler for such use.
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor IEEEtran}
+
+
+\begin{document}
+
+% paper title
+\title{Bare Demo of IEEEtran.cls for Conferences}
+
+
+% author names and affiliations
+% use a multiple column layout for up to three different
+% affiliations
+\author{\authorblockN{Michael Shell}
+\authorblockA{School of Electrical and\\Computer Engineering\\
+Georgia Institute of Technology\\
+Atlanta, Georgia 30332--0250\\
+Email: mshell@ece.gatech.edu}
+\and
+\authorblockN{Homer Simpson}
+\authorblockA{Twentieth Century Fox\\
+Springfield, USA\\
+Email: homer@thesimpsons.com}
+\and
+\authorblockN{James Kirk\\ and Montgomery Scott}
+\authorblockA{Starfleet Academy\\
+San Francisco, California 96678-2391\\
+Telephone: (800) 555--1212\\
+Fax: (888) 555--1212}}
+
+
+% avoiding spaces at the end of the author lines is not a problem with
+% conference papers because we don't use \thanks or \IEEEmembership
+
+
+% for over three affiliations, or if they all won't fit within the width
+% of the page, use this alternative format:
+%
+%\author{\authorblockN{Michael Shell\authorrefmark{1},
+%Homer Simpson\authorrefmark{2},
+%James Kirk\authorrefmark{3},
+%Montgomery Scott\authorrefmark{3} and
+%Eldon Tyrell\authorrefmark{4}}
+%\authorblockA{\authorrefmark{1}School of Electrical and Computer Engineering\\
+%Georgia Institute of Technology,
+%Atlanta, Georgia 30332--0250\\ Email: mshell@ece.gatech.edu}
+%\authorblockA{\authorrefmark{2}Twentieth Century Fox, Springfield, USA\\
+%Email: homer@thesimpsons.com}
+%\authorblockA{\authorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
+%Telephone: (800) 555--1212, Fax: (888) 555--1212}
+%\authorblockA{\authorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}
+
+
+
+% use only for invited papers
+%\specialpapernotice{(Invited Paper)}
+
+% make the title area
+\maketitle
+
+\begin{abstract}
+The abstract goes here.
+\end{abstract}
+
+% no keywords
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+%
+% for peerreview papers, inserts a page break and creates the second title.
+% Will be ignored for other modes.
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Introduction}
+% no \PARstart
+This demo file is intended to serve as a ``starter file"
+for IEEE conference papers produced under \LaTeX\ using IEEEtran.cls version
+1.6b and later.
+
+ May all your publication endeavors be successful.
+
+\hfill mds
+
+\hfill November 18, 2002
+
+
+\subsection{Subsection Heading Here}
+Subsection text here.
+
+\subsubsection{Subsubsection Heading Here}
+Subsubsection text here.
+
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class option
+% should be used if it is desired that the figures are to be displayed while
+% in draft mode.
+
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+%
+%\begin{figure}
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+
+% An example of a double column floating figure using two subfigures.
+%(The subfigure.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfigure command, the
+% \label for the overall fgure must come after \caption.
+% \hfil must be used as a separator to get equal spacing
+%
+%\begin{figure*}
+%\centerline{\subfigure[Case I]{\includegraphics[width=2.5in]{subfigcase1}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex
+%\label{fig_first_case}}
+%\hfil
+%\subfigure[Case II]{\includegraphics[width=2.5in]{subfigcase2}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}
+%\end{figure*}
+
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table. Table text will default to
+% \footnotesize as IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+%\caption{An Example of a Table}
+%\label{table_example}
+%\begin{center}
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{center}
+%\end{table}
+
+
+\section{Conclusion}
+The conclusion goes here.
+
+% conference papers do not normally have an appendix
+
+% use section* for acknowledgement
+\section*{Acknowledgment}
+% optional entry into table of contents (if used)
+%\addcontentsline{toc}{section}{Acknowledgment}
+The authors would like to thank...
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+% NOTE: BibTeX documentation can be easily obtained at:
+% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% standard IEEE bibliography style from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/bibtex
+%\bibliographystyle{IEEEtran.bst}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+\begin{thebibliography}{1}
+
+\bibitem{IEEEhowto:kopka}
+H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus
+ 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
+
+\end{thebibliography}
+
+
+% that's all folks
+\end{document}
+
+