diff options
author | Karl Berry <karl@freefriends.org> | 2007-01-12 01:27:18 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2007-01-12 01:27:18 +0000 |
commit | c4a18cc35b13311ec9424f499268be12a8b09eb6 (patch) | |
tree | 7354bf772e14e36189aad4c96fa2c8284a8b98bf /Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex | |
parent | 0a029a4557c3517e1f07d338b2acce0f988e4fff (diff) |
IEEEtrans 1.7
git-svn-id: svn://tug.org/texlive/trunk@3354 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex')
-rw-r--r-- | Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex | 1100 |
1 files changed, 1100 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex b/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex new file mode 100644 index 00000000000..de97ffaad7f --- /dev/null +++ b/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex @@ -0,0 +1,1100 @@ + +%% bare_adv.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the advanced use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer +%% Society journal paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + + +% IEEEtran V1.7 and later provides for these CLASSINPUT macros to allow the +% user to reprogram some IEEEtran.cls defaults if needed. These settings +% override the internal defaults of IEEEtran.cls regardless of which class +% options are used. Do not use these unless you have good reason to do so as +% they can result in nonIEEE compliant documents. User beware. ;) +% +%\newcommand{\CLASSINPUTbaselinestretch}{1.0} % baselinestretch +%\newcommand{\CLASSINPUTinnersidemargin}{1in} % inner side margin +%\newcommand{\CLASSINPUToutersidemargin}{1in} % outer side margin +%\newcommand{\CLASSINPUTtoptextmargin}{1in} % top text margin +%\newcommand{\CLASSINPUTbottomtextmargin}{1in}% bottom text margin + + + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[12pt,journal,compsoc]{IEEEtran} +% The Computer Society requires 12pt. +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[10pt,journal,compsoc]{../sty/IEEEtran} + + +% For Computer Society journals, IEEEtran defaults to the use of +% Palatino/Palladio as is done in IEEE Computer Society journals. +% To go back to Times Roman, you can use this code: +%\renewcommand{\rmdefault}{ptm}\selectfont + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +\ifCLASSOPTIONcompsoc + % IEEE Computer Society needs nocompress option + % requires cite.sty v4.0 or later (November 2003) + % \usepackage[nocompress]{cite} +\else + % normal IEEE + % \usepackage{cite} +\fi +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. +% +% Note that some packages require special options to format as the Computer +% Society requires. In particular, Computer Society papers do not use +% compressed citation ranges as is done in typical IEEE papers +% (e.g., [1]-[4]). Instead, they list every citation separately in order +% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite +% package with the nocompress option which is supported by cite.sty v4.0 +% and later. Note also the use of a CLASSOPTION conditional provided by +% IEEEtran.cls V1.7 and later. + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + +%\usepackage{ps4pdf} +% dvi->ps workflow is required to use such packages as psfrag.sty and +% pstricks.sty. However, Rolf Niepraschk's ps4pdf.sty provides a way to +% apply psfrag/pstricks effects to .eps figures and then get the resultant +% figures in .pdf form. Thus, providing an easier way for migrating from +% .eps to .pdf figures. After ps4pdf.sty loads, if: +% 1. producing .dvi output: the output file will consist ONLY of the +% figures (or other constructs encased within \PSforPDF commands) +% 2. producing .pdf output: pdflatex will look in the filename-pics.pdf +% file, where filename is the basename of the tex document, for the +% graphics (or other constructs encased within \PSforPDF commands). +% NOTE: If you ever change your figures, you must remember to remake +% the filename-pics.pdf file. +% +% This way you can do a: +% +% latex filename +% dvips -Ppdf -o filename-pics.ps filename.dvi +% ps2pdf filename-pics.ps filename-pics.pdf +% +% to produce a filename-pics.pdf graphics container that contains +% .pdf versions of the graphics with psfrag, pstricks, etc. features. +% Note that you will not typically be able to view the figures in +% filename-pics.ps because of an offset. However, you will be able to +% view them in filename-pics.pdf. Also, note that when ps4pdf is in effect +% with .dvi output, you may get harmless over/under full box warnings - +% ignore them. +% Then, run pdflatex: +% +% pdflatex filename +% +% to use pdflatex to make PDF output, automatically using the figures in +% filename-pics.pdf. Alternatively, you could use dvips -i option to +% obtain separate .pdf files for each figure: +% +% dvips -Ppdf -i -E -o fig filename +% +% then convert each figure to pdf via a command such as epstopdf and then +% use pdflatex with these pdf figures and then to dispense with ps4pdf. +% +% Remember to rerun through latex/dvips/ps2pdf if you ever change your +% figures so that filename-pics.pdf gets updated. +% ps4pdf requires David Kastrup's preview-latex and a recent LaTeX system +% (circa 2001 or later). The ps4pdf package and documentation can be +% obtained at: http://www.ctan.org/tex-archive/macros/latex/contrib/ps4pdf/ +% The preview-latex package and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/preview/ +% +% provide a bogus \PSforPDF, even when not loading pd4pdf. This way we can +% stop loading ps4pdf.sty if we choose to make separate .pdf versions of +% each of our figures. +\providecommand{\PSforPDF}[1]{#1} +% Note that in order for ps4pdf to work, all commands related to psfrag, +% pstricks, etc. must be called within the PSforPDF command. This applies +% even when *loading* via \usepackage psfrag.sty, etc. + + +%\PSforPDF{\usepackage{psfrag}} +% psfrag.sty was written by Craig Barratt, Michael C. Grant, and +% David Carlisle. It allows you to substitute LaTeX commands for text in +% imported EPS graphic files. In this way, LaTeX symbols can be placed into +% graphics that have been generated by other applications. You must use +% latex->dvips->ps2pdf workflow (not direct pdf output from pdflatex) if +% you wish to use this capability because it works via some PostScript +% tricks. Alternatively, the graphics could be processed as separate files +% via psfrag and dvips, then converted to PDF for inclusion in the main file +% which uses pdflatex. ps4pdf.sty (above) provides a way of doing this all +% at once within the main file. +% Docs are in "The PSfrag System" by Michael C. Grant and David Carlisle. +% There is also some information about using psfrag in "Using Imported +% Graphics in LaTeX2e" by Keith Reckdahl which documents the graphicx +% package (see above). The psfrag package and documentation can be obtained +% at: http://www.ctan.org/tex-archive/macros/latex/contrib/psfrag/ +% +% Note that the current version of psfrag does not "turn itself off" when +% running under pdf output. This will result in a harmless warning +% about a non-PDF \special. However, to silence this, a bogus psfrag +% command can be provided instead of loading psfrag.sty when PDF output +% is being used. Thus, a more complex alternative conditional loading scheme +% can be employed instead of the straightforword way above: +% +%\ifCLASSINFOpdf +% if outputting PDF, do not use or load psfrag.sty as current versions +% output a non-PDF special that generates a harmless, but annoying warning. +% Instead, we provide a bogus \psfrag command that does nothing with +% its arguments. This is a tad tricky because \psfrag can have up to six +% arguments four of which are optional: \psfrag{}[][][][]{} +% Code based on that in psfrag.sty +%\makeatletter +%\def\psfrag{\@ifstar{\@BOGUSpsfraga}{\@BOGUSpsfraga}} +%\def\@BOGUSpsfraga{\begingroup +% \@makeother\"\@makeother\*\@makeother\!\@makeother\~% +% \@makeother\:\@makeother\\\@makeother\%\@makeother\#% +% \@makeother\ \@BOGUSpsfragb} +%\def\@BOGUSpsfragb#1{\endgroup +% \@ifnextchar [{\@BOGUSpsfragc}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragc[#1]{\@ifnextchar [{\@BOGUSpsfragd}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragd[#1]{\@ifnextchar [{\@BOGUSpsfrage}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfrage[#1]{\@ifnextchar [{\@BOGUSpsfragf}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragf[#1]{\@BOGUSpsfrag} +%\def\@BOGUSpsfrag#1{\ignorespaces} +%\makeatother +%\else +% using dvi output, load psfrag, but funnel it through PSforPDF +% as required by ps4pdf.sty +%\PSforPDF{\usepackage{psfrag}} +%\fi + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +%\usepackage{acronym} +% acronym.sty was written by Tobias Oetiker. This package provides tools for +% managing documents with large numbers of acronyms. (You don't *have* to +% use this package - unless you have a lot of acronyms, you may feel that +% such package management of them is bit of an overkill.) +% Do note that the acronym environment (which lists acronyms) will have a +% problem when used under IEEEtran.cls because acronym.sty relies on the +% description list environment - which IEEEtran.cls has customized for +% producing IEEE style lists. A workaround is to declared the longest +% label width via the IEEEtran.cls \IEEEiedlistdecl global control: +% +% \renewcommand{\IEEEiedlistdecl}{\IEEEsetlabelwidth{SONET}} +% \begin{acronym} +% +% \end{acronym} +% \renewcommand{\IEEEiedlistdecl}{\relax}% remember to reset \IEEEiedlistdecl +% +% instead of using the acronym environment's optional argument. +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/acronym/ + + +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\ifCLASSOPTIONcompsoc +%\usepackage[tight,normalsize,sf,SF]{subfigure} +%\else +%\usepackage[tight,footnotesize]{subfigure} +%\fi +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. Computer Society papers +% use a larger font and \sffamily font for their captions, hence the +% additional options needed under compsoc mode. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false]{caption} +% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false]{caption} +% \usepackage[font=footnotesize]{subfig} +%\fi +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false,font=footnotesize]{subfig} +%\fi +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + +% NOTE: PDF thumbnail features are not required in IEEE papers +% and their use requires extra complexity and work. +%\ifCLASSINFOpdf +% \usepackage[pdftex]{thumbpdf} +%\else +% \usepackage[dvips]{thumbpdf} +%\fi +% thumbpdf.sty and its companion Perl utility were written by Heiko Oberdiek. +% It allows the user a way to produce PDF documents that contain fancy +% thumbnail images of each of the pages (which tools like acrobat reader can +% utilize). This is possible even when using dvi->ps->pdf workflow if the +% correct thumbpdf driver options are used. thumbpdf.sty incorporates the +% file containing the PDF thumbnail information (filename.tpm is used with +% dvips, filename.tpt is used with pdftex, where filename is the base name of +% your tex document) into the final ps or pdf output document. An external +% utility, the thumbpdf *Perl script* is needed to make these .tpm or .tpt +% thumbnail files from a .ps or .pdf version of the document (which obviously +% does not yet contain pdf thumbnails). Thus, one does a: +% +% thumbpdf filename.pdf +% +% to make a filename.tpt, and: +% +% thumbpdf --mode dvips filename.ps +% +% to make a filename.tpm which will then be loaded into the document by +% thumbpdf.sty the NEXT time the document is compiled (by pdflatex or +% latex->dvips->ps2pdf). Users must be careful to regenerate the .tpt and/or +% .tpm files if the main document changes and then to recompile the +% document to incorporate the revised thumbnails to ensure that thumbnails +% match the actual pages. It is easy to forget to do this! +% +% Unix systems come with a Perl interpreter. However, MS Windows users +% will usually have to install a Perl interpreter so that the thumbpdf +% script can be run. The Ghostscript PS/PDF interpreter is also required. +% See the thumbpdf docs for details. The latest version and documentation +% can be obtained at. +% http://www.ctan.org/tex-archive/support/thumbpdf/ +% Be sure and use only version 3.8 (2005/07/06) or later of thumbpdf as +% earlier versions will not work properly with recent versions of pdfTeX +% (1.20a and later). + + +% NOTE: PDF hyperlink and bookmark features are not required in IEEE +% papers and their use requires extra complexity and work. +% *** IF USING HYPERREF BE SURE AND CHANGE THE EXAMPLE PDF *** +% *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!! *** +\newcommand\MYhyperrefoptions{bookmarks=true,bookmarksnumbered=true, +pdfpagemode={UseOutlines},plainpages=false,pdfpagelabels=true, +colorlinks=true,linkcolor={black},citecolor={black},pagecolor={black}, +urlcolor={black}, +pdftitle={Bare Demo of IEEEtran.cls for Computer Society Journals},%<!CHANGE! +pdfsubject={Typesetting},%<!CHANGE! +pdfauthor={Michael D. Shell},%<!CHANGE! +pdfkeywords={Computer Society, IEEEtran, journal, LaTeX, paper, + template}}%<^!CHANGE! +%\ifCLASSINFOpdf +%\usepackage[\MYhyperrefoptions,pdftex]{hyperref} +%\else +%\usepackage[\MYhyperrefoptions,breaklinks=true,dvips]{hyperref} +%\usepackage{breakurl} +%\fi +% One significant drawback of using hyperref under DVI output is that the +% LaTeX compiler cannot break URLs across lines or pages as can be done +% under pdfLaTeX's PDF output via the hyperref pdftex driver. This is +% probably the single most important capability distinction between the +% DVI and PDF output. Perhaps surprisingly, all the other PDF features +% (PDF bookmarks, thumbnails, etc.) can be preserved in +% .tex->.dvi->.ps->.pdf workflow if the respective packages/scripts are +% loaded/invoked with the correct driver options (dvips, etc.). +% As most IEEE papers use URLs sparingly (mainly in the references), this +% may not be as big an issue as with other publications. +% +% That said, recently Vilar Camara Neto introduced his breakurl.sty +% package which permits hyperref to easily break URLs even in dvi +% mode. Note that breakurl, unlike most other packages, must be loaded +% AFTER hyperref. The latest version of breakurl and its documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/breakurl/ +% breakurl.sty is not for use under pdflatex pdf mode. Versions 1.10 +% (September 23, 2005) and later are recommened to avoid bugs in earlier +% releases. +% +% The advanced features offer by hyperref.sty are not required for IEEE +% submission, so users should weigh these features against the added +% complexity of use. Users who wish to use hyperref *must* ensure that +% their hyperref version is 6.72u or later *and* IEEEtran.cls is version +% 1.6b or later. +% The package options above demonstrate how to enable PDF bookmarks +% (a type of table of contents viewable in Acrobat Reader) as well as +% PDF document information (title, subject, author and keywords) that is +% viewable in Acrobat reader's Document_Properties menu. PDF document +% information is also used extensively to automate the cataloging of PDF +% documents. The above set of options ensures that hyperlinks will not be +% colored in the text and thus will not be visible in the printed page, +% but will be active on "mouse over". USING COLORS OR OTHER HIGHLIGHTING +% OF HYPERLINKS CAN RESULT IN DOCUMENT REJECTION BY THE IEEE, especially if +% these appear on the "printed" page. IF IN DOUBT, ASK THE RELEVANT +% SUBMISSION EDITOR. You may need to add the option hypertexnames=false if +% you used duplicate equation numbers, etc., but this should not be needed +% in normal IEEE work. +% The latest version of hyperref and its documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/hyperref/ + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Advanced Demo of IEEEtran.cls\\ for Computer Society Journals} +% +% +% author names and IEEE memberships +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% +% +%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted +% lists the Computer Society journals use for "first footnote" author +% affiliations. Use \IEEEcompsocthanksitem which works much like \item +% for each affiliation group. When not in compsoc mode, +% \IEEEcompsocitemizethanks becomes like \thanks and +% \IEEEcompsocthanksitem becomes a line break with idention. This +% facilitates dual compilation, although admittedly the differences in the +% desired content of \author between the different types of papers makes a +% one-size-fits-all approach a daunting prospect. For instance, compsoc +% journal papers have the author affiliations above the "Manuscript +% received ..." text while in non-compsoc journals this is reversed. Sigh. + +\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} + John~Doe,~\IEEEmembership{Fellow,~OSA,} + and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space +\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department +of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332.\protect\\ +% note need leading \protect in front of \\ to get a newline within \thanks as +% \\ is fragile and will error, could use \hfil\break instead. +E-mail: see http://www.michaelshell.org/contact.html +\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space +\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}} + +% note the % following the last \IEEEmembership and also \thanks - +% these prevent an unwanted space from occurring between the last author name +% and the end of the author line. i.e., if you had this: +% +% \author{....lastname \thanks{...} \thanks{...} } +% ^------------^------------^----Do not want these spaces! +% +% a space would be appended to the last name and could cause every name on that +% line to be shifted left slightly. This is one of those "LaTeX things". For +% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get +% "AB" then you have to do: "\textbf{A}\textbf{B}" +% \thanks is no different in this regard, so shield the last } of each \thanks +% that ends a line with a % and do not let a space in before the next \thanks. +% Spaces after \IEEEmembership other than the last one are OK (and needed) as +% you are supposed to have spaces between the names. For what it is worth, +% this is a minor point as most people would not even notice if the said evil +% space somehow managed to creep in. + + + +% The paper headers +\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Advanced Demo of IEEEtran.cls for Journals} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% +% *** Note that you probably will NOT want to include the author's *** +% *** name in the headers of peer review papers. *** +% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if +% you desire. + + + +% The publisher's ID mark at the bottom of the page is less important with +% Computer Society journal papers as those publications place the marks +% outside of the main text columns and, therefore, unlike regular IEEE +% journals, the available text space is not reduced by their presence. +% If you want to put a publisher's ID mark on the page you can do it like +% this: +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE} +% or like this to get the Computer Society new two part style. +%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}% +%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}} +% Remember, if you use this you must call \IEEEpubidadjcol in the second +% column for its text to clear the IEEEpubid mark (Computer Society jorunal +% papers don't need this extra clearance.) + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + +% for Computer Society papers, we must declare the abstract and index terms +% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran +% command as these need to go into the title area created by \maketitle. +\IEEEcompsoctitleabstractindextext{% +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the journal you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals frown on math +% in the abstract anyway. In particular, the Computer Society does +% not want either math or citations to appear in the abstract. + +% Note that keywords are not normally used for peerreview papers. +\begin{IEEEkeywords} +Computer Society, IEEEtran, journal, \LaTeX, paper, template. +\end{IEEEkeywords}} + + +% make the title area +\maketitle + + +% To allow for easy dual compilation without having to reenter the +% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will +% not be used in maketitle, but will appear (i.e., to be "transported") +% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode +% is not selected <OR> if conference mode is selected - because compsoc +% conference papers position the abstract like regular (non-compsoc) +% papers do! +\IEEEdisplaynotcompsoctitleabstractindextext +% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using +% compsoc under a non-conference mode. + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% Computer Society journal papers do something a tad strange with the very +% first section heading (almost always called "Introduction"). They place it +% ABOVE the main text! IEEEtran.cls currently does not do this for you. +% However, You can achieve this effect by making LaTeX jump through some +% hoops via something like: +% +%\ifCLASSOPTIONcompsoc +% \noindent\raisebox{2\baselineskip}[0pt][0pt]% +% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}% +% \global\everypar=\everypar}}% +% \vspace{-1\baselineskip}\vspace{-\parskip}\par +%\else +% \section{Introduction}\label{sec:introduction}\par +%\fi +% +% Admittedly, this is a hack and may well be fragile, but seems to do the +% trick for me. Note the need to keep any \label that may be used right +% after \section in the above as the hack puts \section within a raised box. + + + +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps (small caps for compsoc). +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for IEEE Computer Society journal papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. +% However, the Computer Society has been known to put floats at the bottom. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% However, Computer Society journals sometimes do use bottom floats - bear +% this in mind when choosing appropriate optional arguments for the +% figure/table environments. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Proof of the First Zonklar Equation} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\ifCLASSOPTIONcompsoc + % The Computer Society usually uses the plural form + \section*{Acknowledgments} +\else + % regular IEEE prefers the singular form + \section*{Acknowledgment} +\fi + + +The authors would like to thank... + + +% Can use something like this to put references on a page +% by themselves when using endfloat and the captionsoff option. +\ifCLASSOPTIONcaptionsoff + \newpage +\fi + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% <OR> manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section +% +% If you have an EPS/PDF photo (graphicx package needed) extra braces are +% needed around the contents of the optional argument to biography to prevent +% the LaTeX parser from getting confused when it sees the complicated +% \includegraphics command within an optional argument. (You could create +% your own custom macro containing the \includegraphics command to make things +% simpler here.) +%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell} +% or if you just want to reserve a space for a photo: + +\begin{IEEEbiography}{Michael Shell} +Biography text here. +\end{IEEEbiography} + +% if you will not have a photo at all: +\begin{IEEEbiographynophoto}{John Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{Jane Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% You can push biographies down or up by placing +% a \vfill before or after them. The appropriate +% use of \vfill depends on what kind of text is +% on the last page and whether or not the columns +% are being equalized. + +%\vfill + +% Can be used to pull up biographies so that the bottom of the last one +% is flush with the other column. +%\enlargethispage{-5in} + + + +% that's all folks +\end{document} + + |