grandfather olsak-misc booklet.tex and cropmarks.tex into runtime, despite too-generic names

git-svn-id: svn://tug.org/texlive/trunk@65631 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 253 deletions

diff --git a/Master/texmf-dist/doc/generic/olsak-misc/booklet.tex b/Master/texmf-dist/doc/generic/olsak-misc/booklet.tex
deleted file mode 100644
index 1afeede5d98..00000000000
--- a/Master/texmf-dist/doc/generic/olsak-misc/booklet.tex
+++ /dev/null
@@ -1,38 +0,0 @@
-% booklet.tex  ... re-orders PDF pages and collets them for booklet printing 
-
-% This macro is used as an example in the book
-% Petr Olsak: Typograficky system TeX, pages 102, 103.
-
-% Usage: change the first definition \def\document{your-document}
-% without PDF extension and process: pdftex booklet.
-% Then use duplex printing over the short side.
-
-\ifx\document\undefined
-   \def\document {navrh-rozpoctu} % Name of processed document without suffix
-\fi
-\nopagenumbers % we need no pagenumbers
-\pdfpagewidth=297mm \pdfpageheight=210mm % sheet = format A4 landscape
-\pdfhorigin=0pt \pdfvorigin=0pt          % Knuth's origin-point shifted
-\def\pageswidth{width.5\pdfpagewidth}    % page width = 1/2 of sheet width 
-
-\pdfximage \pageswidth {\document.pdf}   % First page is read in order to
-\mathchardef\firstpage=\pdflastximage    % detect \pdflastximagepages
-
-\def\putpage#1{% put the page number #1 into sheet
-   \ifnum#1>\pdflastximagepages \hbox{\vrule\pageswidth}\else % empty page
-      \ifnum#1=1 \pdfrefximage\firstpage                   % first page   
-      \else \pdfximage \pageswidth page#1 {\document.pdf}% % normal page
-            \pdfrefximage\pdflastximage
-      \fi\fi}
-
-\newcount\aL \newcount\aR \newcount\bL \newcount\bR
-\aL=\pdflastximagepages
-\advance\aL by3 \divide\aL by4 \multiply\aL by4  % rounding to 4N up 
-\aR=1  \bL=2 \bR=\aL \advance\bR by-1            % little calculations
-\loop
-   \hbox{\putpage\aL \putpage\aR}\vfil\break     % faceside of the sheet
-   \hbox{\putpage\bL \putpage\bR}\vfil\break     % underside of the sheet
-   \advance\aR by2  \advance\aL by-2
-   \advance\bR by-2 \advance\bL by2
-   \ifnum \aL>\aR \repeat
-\end
diff --git a/Master/texmf-dist/doc/generic/olsak-misc/cropmarks.tex b/Master/texmf-dist/doc/generic/olsak-misc/cropmarks.tex
deleted file mode 100644
index 155581692fc..00000000000
--- a/Master/texmf-dist/doc/generic/olsak-misc/cropmarks.tex
+++ /dev/null
@@ -1,215 +0,0 @@
-% cropmarks.tex
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Petr Olsak  <petr@olsak.net>                           Jun. 2022
-
-% This macro adds crop-marks to PDF documents and creates new PDF ouput.
-% See the end of this file for usage and more information.
-
-\newdimen\mlenght  \newdimen\mthick   
-\newdimen\gap      \newdimen\lgap
-\newdimen\hmargin  \newdimen\vmargin
-\newdimen\overlap
-\newcount\tmpnum
-\newcount\hmiddle  \newcount\vmiddle
-
-%% Defaults:
-
-\hmargin=10mm  % added left+right margins from the document border to the sheet border   
-\vmargin=10mm  % added top+bottom margins from the document border to the sheet border   
-\mlenght=5mm   % lenght of the crop-mark abscisses
-\gap=2mm       % distance of crop-mark abscisses from the document corner
-\mthick=.2pt   % thickness of the crop-mark abscisses
-\overlap=0mm   % document borders can exceed to the crop area by \overlap
-\hmiddle=1     % number of equidistant middle marks in left+right margins
-\vmiddle=1     % number of equidistant middle marks in top+bottom margins
-
-\def\document{name}
-\def\info{}
-
-\newbox\hrul \newbox\vrul
-
-\def\initboxes{
-   \setbox\hrul=\hbox{\vrule width\mlenght height.5\mthick depth.5\mthick}
-   \setbox\vrul=\hbox to0pt{\hss\vrule width\mthick  height\mlenght\hss}
-   \ht\hrul=0pt \dp\hrul=0pt
-   \lgap=\gap  \advance\lgap by\mlenght
-}
-\def\cropLT{\vbox to0pt{\vss\llap{\copy\hrul\kern\gap\raise\gap\copy\vrul}}}
-\def\cropRT{\vbox to0pt{\vss\rlap{\raise\gap\copy\vrul\kern\gap\copy\hrul}}}
-\def\cropLB{\vbox to0pt{\llap{\copy\hrul\kern\gap\lower\lgap\copy\vrul}\vss}}
-\def\cropRB{\vbox to0pt{\rlap{\lower\lgap\copy\vrul\kern\gap\copy\hrul}\vss}}
-\def\middleT{\vbox to0pt{\vss\copy\vrul\kern\gap}}
-\def\middleB{\vbox to0pt{\kern\gap\copy\vrul\vss}}
-\def\middleL{\llap{\copy\hrul\kern\gap}}
-\def\middleR{\rlap{\kern\gap\copy\hrul}}
-\def\middleV#1#2{\setbox0=\hbox to#2{#1\kern\gap\hlin#1\hlin\kern\gap#1}%
-   \vbox to0pt{\vss\box0\vss}}
-\def\middleH#1#2{\setbox0=\vbox to#2{#1\kern\gap\vlin#1\vlin\kern\gap#1}%
-   \hbox to0pt{\hss\box0\hss}}
-\def\hlin{\leaders\vrule height.5\mthick depth.5\mthick\hfil}
-\def\vlin{\leaders\hrule width\mthick\vfil}
-\def\middledim{\csname mc?h\the\tmpnum\endcsname}
-
-% \cropmarks{box} 
-% creates a dimension-less crop marks around the box and prints the box with them:
-
-\def\cropmarks#1{%
-   \vbox{\offinterlineskip 
-         \setbox0=\hbox{\kern-\overlap#1\kern-\overlap}
-         \dimen0=\wd0 \dimen1=\ht0 \advance\dimen1 by\dp0 \advance\dimen1 by-2\overlap
-         \kern-\overlap
-         \box0
-         \kern-\overlap
-         \vbox to0pt{
-            \kern-\dimen1
-            \ifx\info\empty \else
-               \vbox to0pt{\vss\hbox{\quad\strut\info}\kern\gap}\fi
-            \hbox to\dimen0{\cropLT\hss \vmiddleloop\middleT \cropRT}
-            \vss \tmpnum=0
-            \loop \ifnum\tmpnum<\hmiddle
-                  \advance\tmpnum by1
-                  \hbox to\dimen0
-                     \ifcsname mc?h\the\tmpnum\endcsname
-                        {\middleH\middleL\middledim \hss \middleH\middleR\middledim}%  
-                     \else {\middleL\hss\middleR}\fi
-                  \vss \repeat
-            \hbox to\dimen0{\cropLB\hss\vmiddleloop\middleB \cropRB}
-         }
-}}
-\def\vmiddleloop#1{\tmpnum=0
-   \loop
-   \ifnum\tmpnum<\vmiddle
-      \advance\tmpnum by1
-      \ifcsname mc?v\the\tmpnum\endcsname \middleV#1{\csname mc?v\the\tmpnum\endcsname}%
-      \else #1\fi
-      \hss
-      \repeat
-}
-\def\docropmarks{%
-   \initboxes
-   \setbox0=\hbox{\pdfximage {\document.pdf}\pdfrefximage\pdflastximage}
-   \pdfpagewidth=\dimexpr\wd0-2\overlap+2\hmargin  \relax
-   \pdfpageheight=\dimexpr\ht0+\dp0-2\overlap+2\vmargin \relax
-   \hoffset=\hmargin \advance\hoffset by-\pdfhorigin
-   \voffset=\vmargin \advance\voffset by-\pdfvorigin
-   %
-   \pageno=1
-   \shipout\cropmarks{\box0}
-   \loop
-      \ifnum\pageno<\pdflastximagepages
-      \advance\pageno by1
-      \shipout\cropmarks
-         {\hbox{\pdfximage page\pageno{\document.pdf}\pdfrefximage\pdflastximage}}
-      \repeat
-   \end
-}
-\let\\=\undefined % for better elimination of bad command line syntax
-
-\frenchspacing
-\def\othe #1{\ifnum#1<10 0\fi\the#1}
-\def\today {\the\year-\othe\month-\othe\day}   % you can re-define this format
-\ifx\optexversion\undefined \catcode`\_=12 \fi % names can include _ character
-
-\def\middlecrop #1:#2{\expandafter\def\csname mc?#1\endcsname{#2}}
-
-\endinput
-
-
-About the cropmarks.tex macro
-=============================
-
-This macro adds crop-marks to arbitrary PDF documents. The PDF document can
-be created by LaTeX or OpTeX or ConTeXt or something else. Then use
-this plain TeX macro for creating additional crop-marks.
-
-Prepare following TeX file. Its name can be crop.tex, for example, but its
-name cannot be cropmarks.tex, becuase this is the macro file.
-
---------------------------------
-
-\input cropmarks
-
-\def\document{name} % the name of the PDF file without extension 
-\def\info{}         % info text printed in the top (in crop area) 
-
-\hmargin=10mm  % added left+right margins from the document border to the sheet border   
-\vmargin=10mm  % added top+bottom margins from the document border to the sheet border   
-\mlenght=5mm   % lenght of the crop-mark abscisses
-\gap=2mm       % distance of crop-mark abscisses from the document corner
-\mthick=.2pt   % thickness of the crop-mark abscisses
-\overlap=0mm   % document borders can exceed to the crop area by \overlap
-\hmiddle=1     % number of equidistant middle marks in left+right margins
-\vmiddle=1     % number of equidistant middle marks in top+bottom margins
-
-\docropmarks   % reads \document.pdf and creates new PDF file
-
----------------------------------
-
-and run it by:
-
-   pdftex crop
-
-or
-
-   optex crop
-
-Of course, you can set different values than these default ones mentioned
-in the example.
-
-The information text defined in the \info macro can include \document.pdf
-(document name), \folio (page number), \today (current date). For example,
-you can try:
-
-   \def\info{\tt [\document.pdf] -- \today\ -- page: \folio}
-
-You can run cropmarks without creating the crop file directly from command line:
-
-   pdftex cropmarks '\def\document{name} \docropmarks'
-
-This command reads name.pdf and creates cropmarks.pdf as the output.
-You can have your own configuration of mentioned values in cropmaks.cfg file 
-and run
-
-   pdftex cropmaks '\input cropmarks.cfg \def\document{name} \docropmarks'
-
-You can use optex instead pdftex, of course.
-
-If you want to put more pages to one sheet then you have to do this job
-first and then you can add cropmarks for whole sheets. Use another software
-(or your TeX macro or use OpTeX trick 0088) for creating sheets and create a
-new PDF document. Then set appropriate number of middle marks and read this
-new document with sheets at input side when you are using cropmarks.tex
-
-The middle marks are only single lines by default (intendend for paper bend
-only). Sometimes we need to leave a space for crop area here too. This is
-possible by \middlecrop vnum:{dimen} or \middlecrop hnum:{dimen}
-declaration. The "h" is declaration for \hmiddle marks (left+right
-margins) and "v" for \vmiddle marks (top+bottom margins). The "num" is order
-number of given middle mark and dimen is the amout of the space between crop
-marks created here (the single-line mark for paper bend is added between
-them to the center). For example, you can create "imposition sheets" with 8
-pages per sheet shown in the example of the OpTeX trick 0088. See also
-https://en.wikipedia.org/wiki/Imposition. Then you can declare:
-
-   \hmiddle=1 \middlecrop h1: {18mm}
-   \vmiddle=3 \middlecrop v2: {14mm}
-
-It says that there is single \hmiddle mark which is intended for bend
-followed by crop 9mm and there is first and third \vmiddle mark intended for
-bend only and second \vmiddle mark is used for bend followed by crop 7mm.
-We get something like this:
-
-    _|      |      |_|_|      |      |_
-
-       page   page       page   page
-
-    _                                 _
-    _|                               |_
-    _|                               |_
-
-
-       page   page       page   page
-    _               _ _               _
-     |      |      | | |      |      |
-
-