update copyrights, rm obsolete contact info and files

git-svn-id: svn://tug.org/texlive/trunk@24080 c570f23f-e606-0410-a88d-b1316a301751

15 files changed, 14 insertions, 196 deletions

diff --git a/Build/source/texk/makeindexk/COPYING b/Build/source/texk/makeindexk/COPYING
index 20c03550f35..151e288b6d0 100644
--- a/Build/source/texk/makeindexk/COPYING
+++ b/Build/source/texk/makeindexk/COPYING
@@ -8,7 +8,7 @@
 	Copyright (C) 1987 by Regents of the University of California
 
 	Author:	
-	  	Pehong Chen (phc@renoir.berkeley.edu)
+	  	Pehong Chen
 		Chen & Harrison International Systems, Inc.
 		Palo Alto, California
 	  	USA
diff --git a/Build/source/texk/makeindexk/INSTALL b/Build/source/texk/makeindexk/INSTALL
deleted file mode 100644
index eba1e0d6dc5..00000000000
--- a/Build/source/texk/makeindexk/INSTALL
+++ /dev/null
@@ -1,181 +0,0 @@
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-
diff --git a/Build/source/texk/makeindexk/NEWS b/Build/source/texk/makeindexk/NEWS
deleted file mode 100644
index 7bccf44ae40..00000000000
--- a/Build/source/texk/makeindexk/NEWS
+++ /dev/null
@@ -1,3 +0,0 @@
-Sat Mar  8 13:44:45 MET 1997:
-  - added GNU autoconf support
-  - added Kpathsea support for .ist files
diff --git a/Build/source/texk/makeindexk/README b/Build/source/texk/makeindexk/README
index 3fea6973a9f..2a21a14bb33 100644
--- a/Build/source/texk/makeindexk/README
+++ b/Build/source/texk/makeindexk/README
@@ -1,6 +1,7 @@
 ------------------------------------------------------------------------------
 		MakeIndexk General Release Information
 
+        Copyright (C) 1998-2011 by the TeX Live project.
 	Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
 	Copyright (C) 1988 by Olivetti Research Center
 	Copyright (C) 1987 by Regents of the University of California
diff --git a/Build/source/texk/makeindexk/genind.c b/Build/source/texk/makeindexk/genind.c
index a17542b9bb6..b2a45e87549 100644
--- a/Build/source/texk/makeindexk/genind.c
+++ b/Build/source/texk/makeindexk/genind.c
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/genind.h b/Build/source/texk/makeindexk/genind.h
index 76235b066fc..3431a6cfe30 100644
--- a/Build/source/texk/makeindexk/genind.h
+++ b/Build/source/texk/makeindexk/genind.h
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/makeindex.1 b/Build/source/texk/makeindexk/makeindex.1
index 98316a65833..92d641b32d3 100644
--- a/Build/source/texk/makeindexk/makeindex.1
+++ b/Build/source/texk/makeindexk/makeindex.1
@@ -6,7 +6,7 @@
 .if t .ds Uc \fIU\\h'-0.12m'C\\v'0.27m'\\h'-.23m'S\\h'-0.11m'F\\v'-0.27m'\fP
 .if n .ds Uc UCSF
 .ds Et \\f(boE\\h'-0.1667m'\\v'-0.20v'T\\v'0.20v'\\h'-0.125m'T\\fP
-.TH MAKEINDEX 1 "6 July 2010" "TeX Live" "TeX Live"
+.TH MAKEINDEX 1 "24 September 2011" "TeX Live" "TeX Live"
 .\"=====================================================================
 .SH NAME
 makeindex \- a general purpose, formatter-independent index processor
@@ -1190,7 +1190,7 @@ AT&T Bell Laboratories, Murray Hill, NJ 07974, 1986).
 .\"=====================================================================
 .SH "AUTHOR"
 Pehong Chen, Chen & Harrison International Systems, Inc.
-Palo Alto, California, USA <chen@renoir.berkeley.edu>.
+Palo Alto, California, USA.
 .br
 Manual page extensively revised and corrected, and
 .IR troff (1)
diff --git a/Build/source/texk/makeindexk/mkind.c b/Build/source/texk/makeindexk/mkind.c
index 754fe771f83..a295024dcdf 100644
--- a/Build/source/texk/makeindexk/mkind.c
+++ b/Build/source/texk/makeindexk/mkind.c
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/mkind.h b/Build/source/texk/makeindexk/mkind.h
index 3cd9d843787..7bfb5e6318b 100644
--- a/Build/source/texk/makeindexk/mkind.h
+++ b/Build/source/texk/makeindexk/mkind.h
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/scanid.c b/Build/source/texk/makeindexk/scanid.c
index 3d84a199314..75916409291 100644
--- a/Build/source/texk/makeindexk/scanid.c
+++ b/Build/source/texk/makeindexk/scanid.c
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/scanid.h b/Build/source/texk/makeindexk/scanid.h
index 43824068b9d..781ae3f709e 100644
--- a/Build/source/texk/makeindexk/scanid.h
+++ b/Build/source/texk/makeindexk/scanid.h
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/scanst.c b/Build/source/texk/makeindexk/scanst.c
index c9aebffec0a..a91fbce042d 100644
--- a/Build/source/texk/makeindexk/scanst.c
+++ b/Build/source/texk/makeindexk/scanst.c
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/scanst.h b/Build/source/texk/makeindexk/scanst.h
index 017d6461d70..17d09ac8073 100644
--- a/Build/source/texk/makeindexk/scanst.h
+++ b/Build/source/texk/makeindexk/scanst.h
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
diff --git a/Build/source/texk/makeindexk/sortid.c b/Build/source/texk/makeindexk/sortid.c
index f3353a5854d..6793481fc3e 100644
--- a/Build/source/texk/makeindexk/sortid.c
+++ b/Build/source/texk/makeindexk/sortid.c
@@ -3,6 +3,7 @@
  *  This file is part of
  *	MakeIndex - A formatter and format independent index processor
  *
+ *  Copyright (C) 1998-2011 by the TeX Live project.
  *  Copyright (C) 1989 by Chen & Harrison International Systems, Inc.
  *  Copyright (C) 1988 by Olivetti Research Center
  *  Copyright (C) 1987 by Regents of the University of California
@@ -12,7 +13,6 @@
  *	Chen & Harrison International Systems, Inc.
  *	Palo Alto, California
  *	USA
- *	(phc@renoir.berkeley.edu or chen@orc.olivetti.com)
  *
  *  Contributors:
  *	Please refer to the CONTRIB file that comes with this release
diff --git a/Build/source/texk/makeindexk/tests/nested-range-test.pl b/Build/source/texk/makeindexk/tests/nested-range-test.pl
index b4882ce9d0e..33dcc13871f 100755
--- a/Build/source/texk/makeindexk/tests/nested-range-test.pl
+++ b/Build/source/texk/makeindexk/tests/nested-range-test.pl
@@ -1,5 +1,5 @@
 #!/usr/bin/env perl
-# $Id: bibtex-openout-test.pl 17384 2010-03-08 18:49:47Z karl $
+# $Id$
 # Public domain.  Originally written 2011, Karl Berry.
 # Check that makeindex doesn't create spurious output from nested ranges.
 # See nested-range.tex and -bb.tex.