/home/texlive/karl/Master/tlpkg/bin/tl-update-auto

git-svn-id: svn://tug.org/texlive/trunk@25149 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 63 insertions, 42 deletions

diff --git a/Build/source/utils/asymptote/doc/FAQ/install-sh b/Build/source/utils/asymptote/doc/FAQ/install-sh
index 6781b987bdb..377bb8687ff 100755
--- a/Build/source/utils/asymptote/doc/FAQ/install-sh
+++ b/Build/source/utils/asymptote/doc/FAQ/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2009-04-28.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,6 +156,10 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
 	shift;;
 
     -T) no_target_directory=true;;
@@ -186,6 +190,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
   done
 fi
 
@@ -194,13 +202,17 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -228,9 +240,9 @@ fi
 
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -252,12 +264,7 @@ do
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
     dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
@@ -347,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
@@ -385,7 +392,7 @@ do
 
       case $dstdir in
 	/*) prefix='/';;
-	-*) prefix='./';;
+	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
       esac
 
@@ -403,7 +410,7 @@ do
 
       for d
       do
-	test -z "$d" && continue
+	test X"$d" = X && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then
diff --git a/Build/source/utils/asymptote/doc/install-sh b/Build/source/utils/asymptote/doc/install-sh
index 6781b987bdb..377bb8687ff 100755
--- a/Build/source/utils/asymptote/doc/install-sh
+++ b/Build/source/utils/asymptote/doc/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2009-04-28.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,6 +156,10 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
 	shift;;
 
     -T) no_target_directory=true;;
@@ -186,6 +190,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
   done
 fi
 
@@ -194,13 +202,17 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -228,9 +240,9 @@ fi
 
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -252,12 +264,7 @@ do
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
     dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
@@ -347,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
@@ -385,7 +392,7 @@ do
 
       case $dstdir in
 	/*) prefix='/';;
-	-*) prefix='./';;
+	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
       esac
 
@@ -403,7 +410,7 @@ do
 
       for d
       do
-	test -z "$d" && continue
+	test X"$d" = X && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then
diff --git a/Build/source/utils/asymptote/install-sh b/Build/source/utils/asymptote/install-sh
index 6781b987bdb..377bb8687ff 100755
--- a/Build/source/utils/asymptote/install-sh
+++ b/Build/source/utils/asymptote/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2009-04-28.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,6 +156,10 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
 	shift;;
 
     -T) no_target_directory=true;;
@@ -186,6 +190,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
   done
 fi
 
@@ -194,13 +202,17 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -228,9 +240,9 @@ fi
 
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -252,12 +264,7 @@ do
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
     dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
@@ -347,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
@@ -385,7 +392,7 @@ do
 
       case $dstdir in
 	/*) prefix='/';;
-	-*) prefix='./';;
+	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
       esac
 
@@ -403,7 +410,7 @@ do
 
       for d
       do
-	test -z "$d" && continue
+	test X"$d" = X && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then